2 * File: include/asm-blackfin/mach-bf527/defBF52x_base.h
13 * Bugs: Enter bugs at http://blackfin.uclinux.org/
15 * This program is free software; you can redistribute it and/or modify
16 * it under the terms of the GNU General Public License as published by
17 * the Free Software Foundation; either version 2, or (at your option)
20 * This program is distributed in the hope that it will be useful,
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23 * GNU General Public License for more details.
25 * You should have received a copy of the GNU General Public License
26 * along with this program; see the file COPYING.
27 * If not, write to the Free Software Foundation,
28 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
35 /* ************************************************************** */
36 /* SYSTEM & MMR ADDRESS DEFINITIONS COMMON TO ALL ADSP-BF52x */
37 /* ************************************************************** */
39 /* ==== begin from defBF534.h ==== */
41 /* Clock and System Control (0xFFC00000 - 0xFFC000FF) */
42 #define PLL_CTL 0xFFC00000 /* PLL Control Register */
43 #define PLL_DIV 0xFFC00004 /* PLL Divide Register */
44 #define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register */
45 #define PLL_STAT 0xFFC0000C /* PLL Status Register */
46 #define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count Register */
47 #define CHIPID 0xFFC00014 /* Device ID Register */
50 /* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */
51 #define SWRST 0xFFC00100 /* Software Reset Register */
52 #define SYSCR 0xFFC00104 /* System Configuration Register */
53 #define SIC_RVECT 0xFFC00108 /* Interrupt Reset Vector Address Register */
55 #define SIC_IMASK0 0xFFC0010C /* Interrupt Mask Register */
56 #define SIC_IAR0 0xFFC00110 /* Interrupt Assignment Register 0 */
57 #define SIC_IAR1 0xFFC00114 /* Interrupt Assignment Register 1 */
58 #define SIC_IAR2 0xFFC00118 /* Interrupt Assignment Register 2 */
59 #define SIC_IAR3 0xFFC0011C /* Interrupt Assignment Register 3 */
60 #define SIC_ISR0 0xFFC00120 /* Interrupt Status Register */
61 #define SIC_IWR0 0xFFC00124 /* Interrupt Wakeup Register */
63 /* SIC Additions to ADSP-BF52x (0xFFC0014C - 0xFFC00162) */
64 #define SIC_IMASK1 0xFFC0014C /* Interrupt Mask register of SIC2 */
65 #define SIC_IAR4 0xFFC00150 /* Interrupt Assignment register4 */
66 #define SIC_IAR5 0xFFC00154 /* Interrupt Assignment register5 */
67 #define SIC_IAR6 0xFFC00158 /* Interrupt Assignment register6 */
68 #define SIC_IAR7 0xFFC0015C /* Interrupt Assignment register7 */
69 #define SIC_ISR1 0xFFC00160 /* Interrupt Statur register */
70 #define SIC_IWR1 0xFFC00164 /* Interrupt Wakeup register */
73 /* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */
74 #define WDOG_CTL 0xFFC00200 /* Watchdog Control Register */
75 #define WDOG_CNT 0xFFC00204 /* Watchdog Count Register */
76 #define WDOG_STAT 0xFFC00208 /* Watchdog Status Register */
79 /* Real Time Clock (0xFFC00300 - 0xFFC003FF) */
80 #define RTC_STAT 0xFFC00300 /* RTC Status Register */
81 #define RTC_ICTL 0xFFC00304 /* RTC Interrupt Control Register */
82 #define RTC_ISTAT 0xFFC00308 /* RTC Interrupt Status Register */
83 #define RTC_SWCNT 0xFFC0030C /* RTC Stopwatch Count Register */
84 #define RTC_ALARM 0xFFC00310 /* RTC Alarm Time Register */
85 #define RTC_FAST 0xFFC00314 /* RTC Prescaler Enable Register */
86 #define RTC_PREN 0xFFC00314 /* RTC Prescaler Enable Alternate Macro */
89 /* UART0 Controller (0xFFC00400 - 0xFFC004FF) */
90 #define UART0_THR 0xFFC00400 /* Transmit Holding register */
91 #define UART0_RBR 0xFFC00400 /* Receive Buffer register */
92 #define UART0_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */
93 #define UART0_IER 0xFFC00404 /* Interrupt Enable Register */
94 #define UART0_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */
95 #define UART0_IIR 0xFFC00408 /* Interrupt Identification Register */
96 #define UART0_LCR 0xFFC0040C /* Line Control Register */
97 #define UART0_MCR 0xFFC00410 /* Modem Control Register */
98 #define UART0_LSR 0xFFC00414 /* Line Status Register */
99 #define UART0_MSR 0xFFC00418 /* Modem Status Register */
100 #define UART0_SCR 0xFFC0041C /* SCR Scratch Register */
101 #define UART0_GCTL 0xFFC00424 /* Global Control Register */
104 /* SPI Controller (0xFFC00500 - 0xFFC005FF) */
105 #define SPI0_REGBASE 0xFFC00500
106 #define SPI_CTL 0xFFC00500 /* SPI Control Register */
107 #define SPI_FLG 0xFFC00504 /* SPI Flag register */
108 #define SPI_STAT 0xFFC00508 /* SPI Status register */
109 #define SPI_TDBR 0xFFC0050C /* SPI Transmit Data Buffer Register */
110 #define SPI_RDBR 0xFFC00510 /* SPI Receive Data Buffer Register */
111 #define SPI_BAUD 0xFFC00514 /* SPI Baud rate Register */
112 #define SPI_SHADOW 0xFFC00518 /* SPI_RDBR Shadow Register */
115 /* TIMER0-7 Registers (0xFFC00600 - 0xFFC006FF) */
116 #define TIMER0_CONFIG 0xFFC00600 /* Timer 0 Configuration Register */
117 #define TIMER0_COUNTER 0xFFC00604 /* Timer 0 Counter Register */
118 #define TIMER0_PERIOD 0xFFC00608 /* Timer 0 Period Register */
119 #define TIMER0_WIDTH 0xFFC0060C /* Timer 0 Width Register */
121 #define TIMER1_CONFIG 0xFFC00610 /* Timer 1 Configuration Register */
122 #define TIMER1_COUNTER 0xFFC00614 /* Timer 1 Counter Register */
123 #define TIMER1_PERIOD 0xFFC00618 /* Timer 1 Period Register */
124 #define TIMER1_WIDTH 0xFFC0061C /* Timer 1 Width Register */
126 #define TIMER2_CONFIG 0xFFC00620 /* Timer 2 Configuration Register */
127 #define TIMER2_COUNTER 0xFFC00624 /* Timer 2 Counter Register */
128 #define TIMER2_PERIOD 0xFFC00628 /* Timer 2 Period Register */
129 #define TIMER2_WIDTH 0xFFC0062C /* Timer 2 Width Register */
131 #define TIMER3_CONFIG 0xFFC00630 /* Timer 3 Configuration Register */
132 #define TIMER3_COUNTER 0xFFC00634 /* Timer 3 Counter Register */
133 #define TIMER3_PERIOD 0xFFC00638 /* Timer 3 Period Register */
134 #define TIMER3_WIDTH 0xFFC0063C /* Timer 3 Width Register */
136 #define TIMER4_CONFIG 0xFFC00640 /* Timer 4 Configuration Register */
137 #define TIMER4_COUNTER 0xFFC00644 /* Timer 4 Counter Register */
138 #define TIMER4_PERIOD 0xFFC00648 /* Timer 4 Period Register */
139 #define TIMER4_WIDTH 0xFFC0064C /* Timer 4 Width Register */
141 #define TIMER5_CONFIG 0xFFC00650 /* Timer 5 Configuration Register */
142 #define TIMER5_COUNTER 0xFFC00654 /* Timer 5 Counter Register */
143 #define TIMER5_PERIOD 0xFFC00658 /* Timer 5 Period Register */
144 #define TIMER5_WIDTH 0xFFC0065C /* Timer 5 Width Register */
146 #define TIMER6_CONFIG 0xFFC00660 /* Timer 6 Configuration Register */
147 #define TIMER6_COUNTER 0xFFC00664 /* Timer 6 Counter Register */
148 #define TIMER6_PERIOD 0xFFC00668 /* Timer 6 Period Register */
149 #define TIMER6_WIDTH 0xFFC0066C /* Timer 6 Width Register */
151 #define TIMER7_CONFIG 0xFFC00670 /* Timer 7 Configuration Register */
152 #define TIMER7_COUNTER 0xFFC00674 /* Timer 7 Counter Register */
153 #define TIMER7_PERIOD 0xFFC00678 /* Timer 7 Period Register */
154 #define TIMER7_WIDTH 0xFFC0067C /* Timer 7 Width Register */
156 #define TIMER_ENABLE 0xFFC00680 /* Timer Enable Register */
157 #define TIMER_DISABLE 0xFFC00684 /* Timer Disable Register */
158 #define TIMER_STATUS 0xFFC00688 /* Timer Status Register */
161 /* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF) */
162 #define PORTFIO 0xFFC00700 /* Port F I/O Pin State Specify Register */
163 #define PORTFIO_CLEAR 0xFFC00704 /* Port F I/O Peripheral Interrupt Clear Register */
164 #define PORTFIO_SET 0xFFC00708 /* Port F I/O Peripheral Interrupt Set Register */
165 #define PORTFIO_TOGGLE 0xFFC0070C /* Port F I/O Pin State Toggle Register */
166 #define PORTFIO_MASKA 0xFFC00710 /* Port F I/O Mask State Specify Interrupt A Register */
167 #define PORTFIO_MASKA_CLEAR 0xFFC00714 /* Port F I/O Mask Disable Interrupt A Register */
168 #define PORTFIO_MASKA_SET 0xFFC00718 /* Port F I/O Mask Enable Interrupt A Register */
169 #define PORTFIO_MASKA_TOGGLE 0xFFC0071C /* Port F I/O Mask Toggle Enable Interrupt A Register */
170 #define PORTFIO_MASKB 0xFFC00720 /* Port F I/O Mask State Specify Interrupt B Register */
171 #define PORTFIO_MASKB_CLEAR 0xFFC00724 /* Port F I/O Mask Disable Interrupt B Register */
172 #define PORTFIO_MASKB_SET 0xFFC00728 /* Port F I/O Mask Enable Interrupt B Register */
173 #define PORTFIO_MASKB_TOGGLE 0xFFC0072C /* Port F I/O Mask Toggle Enable Interrupt B Register */
174 #define PORTFIO_DIR 0xFFC00730 /* Port F I/O Direction Register */
175 #define PORTFIO_POLAR 0xFFC00734 /* Port F I/O Source Polarity Register */
176 #define PORTFIO_EDGE 0xFFC00738 /* Port F I/O Source Sensitivity Register */
177 #define PORTFIO_BOTH 0xFFC0073C /* Port F I/O Set on BOTH Edges Register */
178 #define PORTFIO_INEN 0xFFC00740 /* Port F I/O Input Enable Register */
181 /* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */
182 #define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */
183 #define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */
184 #define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */
185 #define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */
186 #define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */
187 #define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */
188 #define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */
189 #define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */
190 #define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */
191 #define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */
192 #define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */
193 #define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */
194 #define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */
195 #define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */
196 #define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */
197 #define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */
198 #define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */
199 #define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */
200 #define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */
201 #define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */
202 #define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */
203 #define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */
206 /* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */
207 #define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */
208 #define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */
209 #define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */
210 #define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */
211 #define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */
212 #define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */
213 #define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */
214 #define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */
215 #define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */
216 #define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */
217 #define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */
218 #define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */
219 #define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */
220 #define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */
221 #define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */
222 #define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */
223 #define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */
224 #define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */
225 #define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */
226 #define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */
227 #define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */
228 #define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */
231 /* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */
232 #define EBIU_AMGCTL 0xFFC00A00 /* Asynchronous Memory Global Control Register */
233 #define EBIU_AMBCTL0 0xFFC00A04 /* Asynchronous Memory Bank Control Register 0 */
234 #define EBIU_AMBCTL1 0xFFC00A08 /* Asynchronous Memory Bank Control Register 1 */
235 #define EBIU_SDGCTL 0xFFC00A10 /* SDRAM Global Control Register */
236 #define EBIU_SDBCTL 0xFFC00A14 /* SDRAM Bank Control Register */
237 #define EBIU_SDRRC 0xFFC00A18 /* SDRAM Refresh Rate Control Register */
238 #define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */
241 /* DMA Traffic Control Registers */
242 #define DMA_TC_PER 0xFFC00B0C /* Traffic Control Periods Register */
243 #define DMA_TC_CNT 0xFFC00B10 /* Traffic Control Current Counts Register */
245 /* Alternate deprecated register names (below) provided for backwards code compatibility */
246 #define DMA_TCPER 0xFFC00B0C /* Traffic Control Periods Register */
247 #define DMA_TCCNT 0xFFC00B10 /* Traffic Control Current Counts Register */
249 /* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */
250 #define DMA0_NEXT_DESC_PTR 0xFFC00C00 /* DMA Channel 0 Next Descriptor Pointer Register */
251 #define DMA0_START_ADDR 0xFFC00C04 /* DMA Channel 0 Start Address Register */
252 #define DMA0_CONFIG 0xFFC00C08 /* DMA Channel 0 Configuration Register */
253 #define DMA0_X_COUNT 0xFFC00C10 /* DMA Channel 0 X Count Register */
254 #define DMA0_X_MODIFY 0xFFC00C14 /* DMA Channel 0 X Modify Register */
255 #define DMA0_Y_COUNT 0xFFC00C18 /* DMA Channel 0 Y Count Register */
256 #define DMA0_Y_MODIFY 0xFFC00C1C /* DMA Channel 0 Y Modify Register */
257 #define DMA0_CURR_DESC_PTR 0xFFC00C20 /* DMA Channel 0 Current Descriptor Pointer Register */
258 #define DMA0_CURR_ADDR 0xFFC00C24 /* DMA Channel 0 Current Address Register */
259 #define DMA0_IRQ_STATUS 0xFFC00C28 /* DMA Channel 0 Interrupt/Status Register */
260 #define DMA0_PERIPHERAL_MAP 0xFFC00C2C /* DMA Channel 0 Peripheral Map Register */
261 #define DMA0_CURR_X_COUNT 0xFFC00C30 /* DMA Channel 0 Current X Count Register */
262 #define DMA0_CURR_Y_COUNT 0xFFC00C38 /* DMA Channel 0 Current Y Count Register */
264 #define DMA1_NEXT_DESC_PTR 0xFFC00C40 /* DMA Channel 1 Next Descriptor Pointer Register */
265 #define DMA1_START_ADDR 0xFFC00C44 /* DMA Channel 1 Start Address Register */
266 #define DMA1_CONFIG 0xFFC00C48 /* DMA Channel 1 Configuration Register */
267 #define DMA1_X_COUNT 0xFFC00C50 /* DMA Channel 1 X Count Register */
268 #define DMA1_X_MODIFY 0xFFC00C54 /* DMA Channel 1 X Modify Register */
269 #define DMA1_Y_COUNT 0xFFC00C58 /* DMA Channel 1 Y Count Register */
270 #define DMA1_Y_MODIFY 0xFFC00C5C /* DMA Channel 1 Y Modify Register */
271 #define DMA1_CURR_DESC_PTR 0xFFC00C60 /* DMA Channel 1 Current Descriptor Pointer Register */
272 #define DMA1_CURR_ADDR 0xFFC00C64 /* DMA Channel 1 Current Address Register */
273 #define DMA1_IRQ_STATUS 0xFFC00C68 /* DMA Channel 1 Interrupt/Status Register */
274 #define DMA1_PERIPHERAL_MAP 0xFFC00C6C /* DMA Channel 1 Peripheral Map Register */
275 #define DMA1_CURR_X_COUNT 0xFFC00C70 /* DMA Channel 1 Current X Count Register */
276 #define DMA1_CURR_Y_COUNT 0xFFC00C78 /* DMA Channel 1 Current Y Count Register */
278 #define DMA2_NEXT_DESC_PTR 0xFFC00C80 /* DMA Channel 2 Next Descriptor Pointer Register */
279 #define DMA2_START_ADDR 0xFFC00C84 /* DMA Channel 2 Start Address Register */
280 #define DMA2_CONFIG 0xFFC00C88 /* DMA Channel 2 Configuration Register */
281 #define DMA2_X_COUNT 0xFFC00C90 /* DMA Channel 2 X Count Register */
282 #define DMA2_X_MODIFY 0xFFC00C94 /* DMA Channel 2 X Modify Register */
283 #define DMA2_Y_COUNT 0xFFC00C98 /* DMA Channel 2 Y Count Register */
284 #define DMA2_Y_MODIFY 0xFFC00C9C /* DMA Channel 2 Y Modify Register */
285 #define DMA2_CURR_DESC_PTR 0xFFC00CA0 /* DMA Channel 2 Current Descriptor Pointer Register */
286 #define DMA2_CURR_ADDR 0xFFC00CA4 /* DMA Channel 2 Current Address Register */
287 #define DMA2_IRQ_STATUS 0xFFC00CA8 /* DMA Channel 2 Interrupt/Status Register */
288 #define DMA2_PERIPHERAL_MAP 0xFFC00CAC /* DMA Channel 2 Peripheral Map Register */
289 #define DMA2_CURR_X_COUNT 0xFFC00CB0 /* DMA Channel 2 Current X Count Register */
290 #define DMA2_CURR_Y_COUNT 0xFFC00CB8 /* DMA Channel 2 Current Y Count Register */
292 #define DMA3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA Channel 3 Next Descriptor Pointer Register */
293 #define DMA3_START_ADDR 0xFFC00CC4 /* DMA Channel 3 Start Address Register */
294 #define DMA3_CONFIG 0xFFC00CC8 /* DMA Channel 3 Configuration Register */
295 #define DMA3_X_COUNT 0xFFC00CD0 /* DMA Channel 3 X Count Register */
296 #define DMA3_X_MODIFY 0xFFC00CD4 /* DMA Channel 3 X Modify Register */
297 #define DMA3_Y_COUNT 0xFFC00CD8 /* DMA Channel 3 Y Count Register */
298 #define DMA3_Y_MODIFY 0xFFC00CDC /* DMA Channel 3 Y Modify Register */
299 #define DMA3_CURR_DESC_PTR 0xFFC00CE0 /* DMA Channel 3 Current Descriptor Pointer Register */
300 #define DMA3_CURR_ADDR 0xFFC00CE4 /* DMA Channel 3 Current Address Register */
301 #define DMA3_IRQ_STATUS 0xFFC00CE8 /* DMA Channel 3 Interrupt/Status Register */
302 #define DMA3_PERIPHERAL_MAP 0xFFC00CEC /* DMA Channel 3 Peripheral Map Register */
303 #define DMA3_CURR_X_COUNT 0xFFC00CF0 /* DMA Channel 3 Current X Count Register */
304 #define DMA3_CURR_Y_COUNT 0xFFC00CF8 /* DMA Channel 3 Current Y Count Register */
306 #define DMA4_NEXT_DESC_PTR 0xFFC00D00 /* DMA Channel 4 Next Descriptor Pointer Register */
307 #define DMA4_START_ADDR 0xFFC00D04 /* DMA Channel 4 Start Address Register */
308 #define DMA4_CONFIG 0xFFC00D08 /* DMA Channel 4 Configuration Register */
309 #define DMA4_X_COUNT 0xFFC00D10 /* DMA Channel 4 X Count Register */
310 #define DMA4_X_MODIFY 0xFFC00D14 /* DMA Channel 4 X Modify Register */
311 #define DMA4_Y_COUNT 0xFFC00D18 /* DMA Channel 4 Y Count Register */
312 #define DMA4_Y_MODIFY 0xFFC00D1C /* DMA Channel 4 Y Modify Register */
313 #define DMA4_CURR_DESC_PTR 0xFFC00D20 /* DMA Channel 4 Current Descriptor Pointer Register */
314 #define DMA4_CURR_ADDR 0xFFC00D24 /* DMA Channel 4 Current Address Register */
315 #define DMA4_IRQ_STATUS 0xFFC00D28 /* DMA Channel 4 Interrupt/Status Register */
316 #define DMA4_PERIPHERAL_MAP 0xFFC00D2C /* DMA Channel 4 Peripheral Map Register */
317 #define DMA4_CURR_X_COUNT 0xFFC00D30 /* DMA Channel 4 Current X Count Register */
318 #define DMA4_CURR_Y_COUNT 0xFFC00D38 /* DMA Channel 4 Current Y Count Register */
320 #define DMA5_NEXT_DESC_PTR 0xFFC00D40 /* DMA Channel 5 Next Descriptor Pointer Register */
321 #define DMA5_START_ADDR 0xFFC00D44 /* DMA Channel 5 Start Address Register */
322 #define DMA5_CONFIG 0xFFC00D48 /* DMA Channel 5 Configuration Register */
323 #define DMA5_X_COUNT 0xFFC00D50 /* DMA Channel 5 X Count Register */
324 #define DMA5_X_MODIFY 0xFFC00D54 /* DMA Channel 5 X Modify Register */
325 #define DMA5_Y_COUNT 0xFFC00D58 /* DMA Channel 5 Y Count Register */
326 #define DMA5_Y_MODIFY 0xFFC00D5C /* DMA Channel 5 Y Modify Register */
327 #define DMA5_CURR_DESC_PTR 0xFFC00D60 /* DMA Channel 5 Current Descriptor Pointer Register */
328 #define DMA5_CURR_ADDR 0xFFC00D64 /* DMA Channel 5 Current Address Register */
329 #define DMA5_IRQ_STATUS 0xFFC00D68 /* DMA Channel 5 Interrupt/Status Register */
330 #define DMA5_PERIPHERAL_MAP 0xFFC00D6C /* DMA Channel 5 Peripheral Map Register */
331 #define DMA5_CURR_X_COUNT 0xFFC00D70 /* DMA Channel 5 Current X Count Register */
332 #define DMA5_CURR_Y_COUNT 0xFFC00D78 /* DMA Channel 5 Current Y Count Register */
334 #define DMA6_NEXT_DESC_PTR 0xFFC00D80 /* DMA Channel 6 Next Descriptor Pointer Register */
335 #define DMA6_START_ADDR 0xFFC00D84 /* DMA Channel 6 Start Address Register */
336 #define DMA6_CONFIG 0xFFC00D88 /* DMA Channel 6 Configuration Register */
337 #define DMA6_X_COUNT 0xFFC00D90 /* DMA Channel 6 X Count Register */
338 #define DMA6_X_MODIFY 0xFFC00D94 /* DMA Channel 6 X Modify Register */
339 #define DMA6_Y_COUNT 0xFFC00D98 /* DMA Channel 6 Y Count Register */
340 #define DMA6_Y_MODIFY 0xFFC00D9C /* DMA Channel 6 Y Modify Register */
341 #define DMA6_CURR_DESC_PTR 0xFFC00DA0 /* DMA Channel 6 Current Descriptor Pointer Register */
342 #define DMA6_CURR_ADDR 0xFFC00DA4 /* DMA Channel 6 Current Address Register */
343 #define DMA6_IRQ_STATUS 0xFFC00DA8 /* DMA Channel 6 Interrupt/Status Register */
344 #define DMA6_PERIPHERAL_MAP 0xFFC00DAC /* DMA Channel 6 Peripheral Map Register */
345 #define DMA6_CURR_X_COUNT 0xFFC00DB0 /* DMA Channel 6 Current X Count Register */
346 #define DMA6_CURR_Y_COUNT 0xFFC00DB8 /* DMA Channel 6 Current Y Count Register */
348 #define DMA7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA Channel 7 Next Descriptor Pointer Register */
349 #define DMA7_START_ADDR 0xFFC00DC4 /* DMA Channel 7 Start Address Register */
350 #define DMA7_CONFIG 0xFFC00DC8 /* DMA Channel 7 Configuration Register */
351 #define DMA7_X_COUNT 0xFFC00DD0 /* DMA Channel 7 X Count Register */
352 #define DMA7_X_MODIFY 0xFFC00DD4 /* DMA Channel 7 X Modify Register */
353 #define DMA7_Y_COUNT 0xFFC00DD8 /* DMA Channel 7 Y Count Register */
354 #define DMA7_Y_MODIFY 0xFFC00DDC /* DMA Channel 7 Y Modify Register */
355 #define DMA7_CURR_DESC_PTR 0xFFC00DE0 /* DMA Channel 7 Current Descriptor Pointer Register */
356 #define DMA7_CURR_ADDR 0xFFC00DE4 /* DMA Channel 7 Current Address Register */
357 #define DMA7_IRQ_STATUS 0xFFC00DE8 /* DMA Channel 7 Interrupt/Status Register */
358 #define DMA7_PERIPHERAL_MAP 0xFFC00DEC /* DMA Channel 7 Peripheral Map Register */
359 #define DMA7_CURR_X_COUNT 0xFFC00DF0 /* DMA Channel 7 Current X Count Register */
360 #define DMA7_CURR_Y_COUNT 0xFFC00DF8 /* DMA Channel 7 Current Y Count Register */
362 #define DMA8_NEXT_DESC_PTR 0xFFC00E00 /* DMA Channel 8 Next Descriptor Pointer Register */
363 #define DMA8_START_ADDR 0xFFC00E04 /* DMA Channel 8 Start Address Register */
364 #define DMA8_CONFIG 0xFFC00E08 /* DMA Channel 8 Configuration Register */
365 #define DMA8_X_COUNT 0xFFC00E10 /* DMA Channel 8 X Count Register */
366 #define DMA8_X_MODIFY 0xFFC00E14 /* DMA Channel 8 X Modify Register */
367 #define DMA8_Y_COUNT 0xFFC00E18 /* DMA Channel 8 Y Count Register */
368 #define DMA8_Y_MODIFY 0xFFC00E1C /* DMA Channel 8 Y Modify Register */
369 #define DMA8_CURR_DESC_PTR 0xFFC00E20 /* DMA Channel 8 Current Descriptor Pointer Register */
370 #define DMA8_CURR_ADDR 0xFFC00E24 /* DMA Channel 8 Current Address Register */
371 #define DMA8_IRQ_STATUS 0xFFC00E28 /* DMA Channel 8 Interrupt/Status Register */
372 #define DMA8_PERIPHERAL_MAP 0xFFC00E2C /* DMA Channel 8 Peripheral Map Register */
373 #define DMA8_CURR_X_COUNT 0xFFC00E30 /* DMA Channel 8 Current X Count Register */
374 #define DMA8_CURR_Y_COUNT 0xFFC00E38 /* DMA Channel 8 Current Y Count Register */
376 #define DMA9_NEXT_DESC_PTR 0xFFC00E40 /* DMA Channel 9 Next Descriptor Pointer Register */
377 #define DMA9_START_ADDR 0xFFC00E44 /* DMA Channel 9 Start Address Register */
378 #define DMA9_CONFIG 0xFFC00E48 /* DMA Channel 9 Configuration Register */
379 #define DMA9_X_COUNT 0xFFC00E50 /* DMA Channel 9 X Count Register */
380 #define DMA9_X_MODIFY 0xFFC00E54 /* DMA Channel 9 X Modify Register */
381 #define DMA9_Y_COUNT 0xFFC00E58 /* DMA Channel 9 Y Count Register */
382 #define DMA9_Y_MODIFY 0xFFC00E5C /* DMA Channel 9 Y Modify Register */
383 #define DMA9_CURR_DESC_PTR 0xFFC00E60 /* DMA Channel 9 Current Descriptor Pointer Register */
384 #define DMA9_CURR_ADDR 0xFFC00E64 /* DMA Channel 9 Current Address Register */
385 #define DMA9_IRQ_STATUS 0xFFC00E68 /* DMA Channel 9 Interrupt/Status Register */
386 #define DMA9_PERIPHERAL_MAP 0xFFC00E6C /* DMA Channel 9 Peripheral Map Register */
387 #define DMA9_CURR_X_COUNT 0xFFC00E70 /* DMA Channel 9 Current X Count Register */
388 #define DMA9_CURR_Y_COUNT 0xFFC00E78 /* DMA Channel 9 Current Y Count Register */
390 #define DMA10_NEXT_DESC_PTR 0xFFC00E80 /* DMA Channel 10 Next Descriptor Pointer Register */
391 #define DMA10_START_ADDR 0xFFC00E84 /* DMA Channel 10 Start Address Register */
392 #define DMA10_CONFIG 0xFFC00E88 /* DMA Channel 10 Configuration Register */
393 #define DMA10_X_COUNT 0xFFC00E90 /* DMA Channel 10 X Count Register */
394 #define DMA10_X_MODIFY 0xFFC00E94 /* DMA Channel 10 X Modify Register */
395 #define DMA10_Y_COUNT 0xFFC00E98 /* DMA Channel 10 Y Count Register */
396 #define DMA10_Y_MODIFY 0xFFC00E9C /* DMA Channel 10 Y Modify Register */
397 #define DMA10_CURR_DESC_PTR 0xFFC00EA0 /* DMA Channel 10 Current Descriptor Pointer Register */
398 #define DMA10_CURR_ADDR 0xFFC00EA4 /* DMA Channel 10 Current Address Register */
399 #define DMA10_IRQ_STATUS 0xFFC00EA8 /* DMA Channel 10 Interrupt/Status Register */
400 #define DMA10_PERIPHERAL_MAP 0xFFC00EAC /* DMA Channel 10 Peripheral Map Register */
401 #define DMA10_CURR_X_COUNT 0xFFC00EB0 /* DMA Channel 10 Current X Count Register */
402 #define DMA10_CURR_Y_COUNT 0xFFC00EB8 /* DMA Channel 10 Current Y Count Register */
404 #define DMA11_NEXT_DESC_PTR 0xFFC00EC0 /* DMA Channel 11 Next Descriptor Pointer Register */
405 #define DMA11_START_ADDR 0xFFC00EC4 /* DMA Channel 11 Start Address Register */
406 #define DMA11_CONFIG 0xFFC00EC8 /* DMA Channel 11 Configuration Register */
407 #define DMA11_X_COUNT 0xFFC00ED0 /* DMA Channel 11 X Count Register */
408 #define DMA11_X_MODIFY 0xFFC00ED4 /* DMA Channel 11 X Modify Register */
409 #define DMA11_Y_COUNT 0xFFC00ED8 /* DMA Channel 11 Y Count Register */
410 #define DMA11_Y_MODIFY 0xFFC00EDC /* DMA Channel 11 Y Modify Register */
411 #define DMA11_CURR_DESC_PTR 0xFFC00EE0 /* DMA Channel 11 Current Descriptor Pointer Register */
412 #define DMA11_CURR_ADDR 0xFFC00EE4 /* DMA Channel 11 Current Address Register */
413 #define DMA11_IRQ_STATUS 0xFFC00EE8 /* DMA Channel 11 Interrupt/Status Register */
414 #define DMA11_PERIPHERAL_MAP 0xFFC00EEC /* DMA Channel 11 Peripheral Map Register */
415 #define DMA11_CURR_X_COUNT 0xFFC00EF0 /* DMA Channel 11 Current X Count Register */
416 #define DMA11_CURR_Y_COUNT 0xFFC00EF8 /* DMA Channel 11 Current Y Count Register */
418 #define MDMA_D0_NEXT_DESC_PTR 0xFFC00F00 /* MemDMA Stream 0 Destination Next Descriptor Pointer Register */
419 #define MDMA_D0_START_ADDR 0xFFC00F04 /* MemDMA Stream 0 Destination Start Address Register */
420 #define MDMA_D0_CONFIG 0xFFC00F08 /* MemDMA Stream 0 Destination Configuration Register */
421 #define MDMA_D0_X_COUNT 0xFFC00F10 /* MemDMA Stream 0 Destination X Count Register */
422 #define MDMA_D0_X_MODIFY 0xFFC00F14 /* MemDMA Stream 0 Destination X Modify Register */
423 #define MDMA_D0_Y_COUNT 0xFFC00F18 /* MemDMA Stream 0 Destination Y Count Register */
424 #define MDMA_D0_Y_MODIFY 0xFFC00F1C /* MemDMA Stream 0 Destination Y Modify Register */
425 #define MDMA_D0_CURR_DESC_PTR 0xFFC00F20 /* MemDMA Stream 0 Destination Current Descriptor Pointer Register */
426 #define MDMA_D0_CURR_ADDR 0xFFC00F24 /* MemDMA Stream 0 Destination Current Address Register */
427 #define MDMA_D0_IRQ_STATUS 0xFFC00F28 /* MemDMA Stream 0 Destination Interrupt/Status Register */
428 #define MDMA_D0_PERIPHERAL_MAP 0xFFC00F2C /* MemDMA Stream 0 Destination Peripheral Map Register */
429 #define MDMA_D0_CURR_X_COUNT 0xFFC00F30 /* MemDMA Stream 0 Destination Current X Count Register */
430 #define MDMA_D0_CURR_Y_COUNT 0xFFC00F38 /* MemDMA Stream 0 Destination Current Y Count Register */
432 #define MDMA_S0_NEXT_DESC_PTR 0xFFC00F40 /* MemDMA Stream 0 Source Next Descriptor Pointer Register */
433 #define MDMA_S0_START_ADDR 0xFFC00F44 /* MemDMA Stream 0 Source Start Address Register */
434 #define MDMA_S0_CONFIG 0xFFC00F48 /* MemDMA Stream 0 Source Configuration Register */
435 #define MDMA_S0_X_COUNT 0xFFC00F50 /* MemDMA Stream 0 Source X Count Register */
436 #define MDMA_S0_X_MODIFY 0xFFC00F54 /* MemDMA Stream 0 Source X Modify Register */
437 #define MDMA_S0_Y_COUNT 0xFFC00F58 /* MemDMA Stream 0 Source Y Count Register */
438 #define MDMA_S0_Y_MODIFY 0xFFC00F5C /* MemDMA Stream 0 Source Y Modify Register */
439 #define MDMA_S0_CURR_DESC_PTR 0xFFC00F60 /* MemDMA Stream 0 Source Current Descriptor Pointer Register */
440 #define MDMA_S0_CURR_ADDR 0xFFC00F64 /* MemDMA Stream 0 Source Current Address Register */
441 #define MDMA_S0_IRQ_STATUS 0xFFC00F68 /* MemDMA Stream 0 Source Interrupt/Status Register */
442 #define MDMA_S0_PERIPHERAL_MAP 0xFFC00F6C /* MemDMA Stream 0 Source Peripheral Map Register */
443 #define MDMA_S0_CURR_X_COUNT 0xFFC00F70 /* MemDMA Stream 0 Source Current X Count Register */
444 #define MDMA_S0_CURR_Y_COUNT 0xFFC00F78 /* MemDMA Stream 0 Source Current Y Count Register */
446 #define MDMA_D1_NEXT_DESC_PTR 0xFFC00F80 /* MemDMA Stream 1 Destination Next Descriptor Pointer Register */
447 #define MDMA_D1_START_ADDR 0xFFC00F84 /* MemDMA Stream 1 Destination Start Address Register */
448 #define MDMA_D1_CONFIG 0xFFC00F88 /* MemDMA Stream 1 Destination Configuration Register */
449 #define MDMA_D1_X_COUNT 0xFFC00F90 /* MemDMA Stream 1 Destination X Count Register */
450 #define MDMA_D1_X_MODIFY 0xFFC00F94 /* MemDMA Stream 1 Destination X Modify Register */
451 #define MDMA_D1_Y_COUNT 0xFFC00F98 /* MemDMA Stream 1 Destination Y Count Register */
452 #define MDMA_D1_Y_MODIFY 0xFFC00F9C /* MemDMA Stream 1 Destination Y Modify Register */
453 #define MDMA_D1_CURR_DESC_PTR 0xFFC00FA0 /* MemDMA Stream 1 Destination Current Descriptor Pointer Register */
454 #define MDMA_D1_CURR_ADDR 0xFFC00FA4 /* MemDMA Stream 1 Destination Current Address Register */
455 #define MDMA_D1_IRQ_STATUS 0xFFC00FA8 /* MemDMA Stream 1 Destination Interrupt/Status Register */
456 #define MDMA_D1_PERIPHERAL_MAP 0xFFC00FAC /* MemDMA Stream 1 Destination Peripheral Map Register */
457 #define MDMA_D1_CURR_X_COUNT 0xFFC00FB0 /* MemDMA Stream 1 Destination Current X Count Register */
458 #define MDMA_D1_CURR_Y_COUNT 0xFFC00FB8 /* MemDMA Stream 1 Destination Current Y Count Register */
460 #define MDMA_S1_NEXT_DESC_PTR 0xFFC00FC0 /* MemDMA Stream 1 Source Next Descriptor Pointer Register */
461 #define MDMA_S1_START_ADDR 0xFFC00FC4 /* MemDMA Stream 1 Source Start Address Register */
462 #define MDMA_S1_CONFIG 0xFFC00FC8 /* MemDMA Stream 1 Source Configuration Register */
463 #define MDMA_S1_X_COUNT 0xFFC00FD0 /* MemDMA Stream 1 Source X Count Register */
464 #define MDMA_S1_X_MODIFY 0xFFC00FD4 /* MemDMA Stream 1 Source X Modify Register */
465 #define MDMA_S1_Y_COUNT 0xFFC00FD8 /* MemDMA Stream 1 Source Y Count Register */
466 #define MDMA_S1_Y_MODIFY 0xFFC00FDC /* MemDMA Stream 1 Source Y Modify Register */
467 #define MDMA_S1_CURR_DESC_PTR 0xFFC00FE0 /* MemDMA Stream 1 Source Current Descriptor Pointer Register */
468 #define MDMA_S1_CURR_ADDR 0xFFC00FE4 /* MemDMA Stream 1 Source Current Address Register */
469 #define MDMA_S1_IRQ_STATUS 0xFFC00FE8 /* MemDMA Stream 1 Source Interrupt/Status Register */
470 #define MDMA_S1_PERIPHERAL_MAP 0xFFC00FEC /* MemDMA Stream 1 Source Peripheral Map Register */
471 #define MDMA_S1_CURR_X_COUNT 0xFFC00FF0 /* MemDMA Stream 1 Source Current X Count Register */
472 #define MDMA_S1_CURR_Y_COUNT 0xFFC00FF8 /* MemDMA Stream 1 Source Current Y Count Register */
475 /* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF) */
476 #define PPI_CONTROL 0xFFC01000 /* PPI Control Register */
477 #define PPI_STATUS 0xFFC01004 /* PPI Status Register */
478 #define PPI_COUNT 0xFFC01008 /* PPI Transfer Count Register */
479 #define PPI_DELAY 0xFFC0100C /* PPI Delay Count Register */
480 #define PPI_FRAME 0xFFC01010 /* PPI Frame Length Register */
483 /* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */
484 #define TWI0_REGBASE 0xFFC01400
485 #define TWI_CLKDIV 0xFFC01400 /* Serial Clock Divider Register */
486 #define TWI_CONTROL 0xFFC01404 /* TWI Control Register */
487 #define TWI_SLAVE_CTL 0xFFC01408 /* Slave Mode Control Register */
488 #define TWI_SLAVE_STAT 0xFFC0140C /* Slave Mode Status Register */
489 #define TWI_SLAVE_ADDR 0xFFC01410 /* Slave Mode Address Register */
490 #define TWI_MASTER_CTL 0xFFC01414 /* Master Mode Control Register */
491 #define TWI_MASTER_STAT 0xFFC01418 /* Master Mode Status Register */
492 #define TWI_MASTER_ADDR 0xFFC0141C /* Master Mode Address Register */
493 #define TWI_INT_STAT 0xFFC01420 /* TWI Interrupt Status Register */
494 #define TWI_INT_MASK 0xFFC01424 /* TWI Master Interrupt Mask Register */
495 #define TWI_FIFO_CTL 0xFFC01428 /* FIFO Control Register */
496 #define TWI_FIFO_STAT 0xFFC0142C /* FIFO Status Register */
497 #define TWI_XMT_DATA8 0xFFC01480 /* FIFO Transmit Data Single Byte Register */
498 #define TWI_XMT_DATA16 0xFFC01484 /* FIFO Transmit Data Double Byte Register */
499 #define TWI_RCV_DATA8 0xFFC01488 /* FIFO Receive Data Single Byte Register */
500 #define TWI_RCV_DATA16 0xFFC0148C /* FIFO Receive Data Double Byte Register */
503 /* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF) */
504 #define PORTGIO 0xFFC01500 /* Port G I/O Pin State Specify Register */
505 #define PORTGIO_CLEAR 0xFFC01504 /* Port G I/O Peripheral Interrupt Clear Register */
506 #define PORTGIO_SET 0xFFC01508 /* Port G I/O Peripheral Interrupt Set Register */
507 #define PORTGIO_TOGGLE 0xFFC0150C /* Port G I/O Pin State Toggle Register */
508 #define PORTGIO_MASKA 0xFFC01510 /* Port G I/O Mask State Specify Interrupt A Register */
509 #define PORTGIO_MASKA_CLEAR 0xFFC01514 /* Port G I/O Mask Disable Interrupt A Register */
510 #define PORTGIO_MASKA_SET 0xFFC01518 /* Port G I/O Mask Enable Interrupt A Register */
511 #define PORTGIO_MASKA_TOGGLE 0xFFC0151C /* Port G I/O Mask Toggle Enable Interrupt A Register */
512 #define PORTGIO_MASKB 0xFFC01520 /* Port G I/O Mask State Specify Interrupt B Register */
513 #define PORTGIO_MASKB_CLEAR 0xFFC01524 /* Port G I/O Mask Disable Interrupt B Register */
514 #define PORTGIO_MASKB_SET 0xFFC01528 /* Port G I/O Mask Enable Interrupt B Register */
515 #define PORTGIO_MASKB_TOGGLE 0xFFC0152C /* Port G I/O Mask Toggle Enable Interrupt B Register */
516 #define PORTGIO_DIR 0xFFC01530 /* Port G I/O Direction Register */
517 #define PORTGIO_POLAR 0xFFC01534 /* Port G I/O Source Polarity Register */
518 #define PORTGIO_EDGE 0xFFC01538 /* Port G I/O Source Sensitivity Register */
519 #define PORTGIO_BOTH 0xFFC0153C /* Port G I/O Set on BOTH Edges Register */
520 #define PORTGIO_INEN 0xFFC01540 /* Port G I/O Input Enable Register */
523 /* General Purpose I/O Port H (0xFFC01700 - 0xFFC017FF) */
524 #define PORTHIO 0xFFC01700 /* Port H I/O Pin State Specify Register */
525 #define PORTHIO_CLEAR 0xFFC01704 /* Port H I/O Peripheral Interrupt Clear Register */
526 #define PORTHIO_SET 0xFFC01708 /* Port H I/O Peripheral Interrupt Set Register */
527 #define PORTHIO_TOGGLE 0xFFC0170C /* Port H I/O Pin State Toggle Register */
528 #define PORTHIO_MASKA 0xFFC01710 /* Port H I/O Mask State Specify Interrupt A Register */
529 #define PORTHIO_MASKA_CLEAR 0xFFC01714 /* Port H I/O Mask Disable Interrupt A Register */
530 #define PORTHIO_MASKA_SET 0xFFC01718 /* Port H I/O Mask Enable Interrupt A Register */
531 #define PORTHIO_MASKA_TOGGLE 0xFFC0171C /* Port H I/O Mask Toggle Enable Interrupt A Register */
532 #define PORTHIO_MASKB 0xFFC01720 /* Port H I/O Mask State Specify Interrupt B Register */
533 #define PORTHIO_MASKB_CLEAR 0xFFC01724 /* Port H I/O Mask Disable Interrupt B Register */
534 #define PORTHIO_MASKB_SET 0xFFC01728 /* Port H I/O Mask Enable Interrupt B Register */
535 #define PORTHIO_MASKB_TOGGLE 0xFFC0172C /* Port H I/O Mask Toggle Enable Interrupt B Register */
536 #define PORTHIO_DIR 0xFFC01730 /* Port H I/O Direction Register */
537 #define PORTHIO_POLAR 0xFFC01734 /* Port H I/O Source Polarity Register */
538 #define PORTHIO_EDGE 0xFFC01738 /* Port H I/O Source Sensitivity Register */
539 #define PORTHIO_BOTH 0xFFC0173C /* Port H I/O Set on BOTH Edges Register */
540 #define PORTHIO_INEN 0xFFC01740 /* Port H I/O Input Enable Register */
543 /* UART1 Controller (0xFFC02000 - 0xFFC020FF) */
544 #define UART1_THR 0xFFC02000 /* Transmit Holding register */
545 #define UART1_RBR 0xFFC02000 /* Receive Buffer register */
546 #define UART1_DLL 0xFFC02000 /* Divisor Latch (Low-Byte) */
547 #define UART1_IER 0xFFC02004 /* Interrupt Enable Register */
548 #define UART1_DLH 0xFFC02004 /* Divisor Latch (High-Byte) */
549 #define UART1_IIR 0xFFC02008 /* Interrupt Identification Register */
550 #define UART1_LCR 0xFFC0200C /* Line Control Register */
551 #define UART1_MCR 0xFFC02010 /* Modem Control Register */
552 #define UART1_LSR 0xFFC02014 /* Line Status Register */
553 #define UART1_MSR 0xFFC02018 /* Modem Status Register */
554 #define UART1_SCR 0xFFC0201C /* SCR Scratch Register */
555 #define UART1_GCTL 0xFFC02024 /* Global Control Register */
558 /* Omit CAN register sets from the defBF534.h (CAN is not in the ADSP-BF52x processor) */
560 /* Pin Control Registers (0xFFC03200 - 0xFFC032FF) */
561 #define PORTF_FER 0xFFC03200 /* Port F Function Enable Register (Alternate/Flag*) */
562 #define PORTG_FER 0xFFC03204 /* Port G Function Enable Register (Alternate/Flag*) */
563 #define PORTH_FER 0xFFC03208 /* Port H Function Enable Register (Alternate/Flag*) */
564 #define BFIN_PORT_MUX 0xFFC0320C /* Port Multiplexer Control Register */
567 /* Handshake MDMA Registers (0xFFC03300 - 0xFFC033FF) */
568 #define HMDMA0_CONTROL 0xFFC03300 /* Handshake MDMA0 Control Register */
569 #define HMDMA0_ECINIT 0xFFC03304 /* HMDMA0 Initial Edge Count Register */
570 #define HMDMA0_BCINIT 0xFFC03308 /* HMDMA0 Initial Block Count Register */
571 #define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshhold Register */
572 #define HMDMA0_ECOVERFLOW 0xFFC03310 /* HMDMA0 Edge Count Overflow Interrupt Register */
573 #define HMDMA0_ECOUNT 0xFFC03314 /* HMDMA0 Current Edge Count Register */
574 #define HMDMA0_BCOUNT 0xFFC03318 /* HMDMA0 Current Block Count Register */
576 #define HMDMA1_CONTROL 0xFFC03340 /* Handshake MDMA1 Control Register */
577 #define HMDMA1_ECINIT 0xFFC03344 /* HMDMA1 Initial Edge Count Register */
578 #define HMDMA1_BCINIT 0xFFC03348 /* HMDMA1 Initial Block Count Register */
579 #define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshhold Register */
580 #define HMDMA1_ECOVERFLOW 0xFFC03350 /* HMDMA1 Edge Count Overflow Interrupt Register */
581 #define HMDMA1_ECOUNT 0xFFC03354 /* HMDMA1 Current Edge Count Register */
582 #define HMDMA1_BCOUNT 0xFFC03358 /* HMDMA1 Current Block Count Register */
584 /* GPIO PIN mux (0xFFC03210 - OxFFC03288) */
585 #define PORTF_MUX 0xFFC03210 /* Port F mux control */
586 #define PORTG_MUX 0xFFC03214 /* Port G mux control */
587 #define PORTH_MUX 0xFFC03218 /* Port H mux control */
588 #define PORTF_DRIVE 0xFFC03220 /* Port F drive strength control */
589 #define PORTG_DRIVE 0xFFC03224 /* Port G drive strength control */
590 #define PORTH_DRIVE 0xFFC03228 /* Port H drive strength control */
591 #define PORTF_SLEW 0xFFC03230 /* Port F slew control */
592 #define PORTG_SLEW 0xFFC03234 /* Port G slew control */
593 #define PORTH_SLEW 0xFFC03238 /* Port H slew control */
594 #define PORTF_HYSTERISIS 0xFFC03240 /* Port F Schmitt trigger control */
595 #define PORTG_HYSTERISIS 0xFFC03244 /* Port G Schmitt trigger control */
596 #define PORTH_HYSTERISIS 0xFFC03248 /* Port H Schmitt trigger control */
597 #define MISCPORT_DRIVE 0xFFC03280 /* Misc Port drive strength control */
598 #define MISCPORT_SLEW 0xFFC03284 /* Misc Port slew control */
599 #define MISCPORT_HYSTERISIS 0xFFC03288 /* Misc Port Schmitt trigger control */
602 /***********************************************************************************
603 ** System MMR Register Bits And Macros
605 ** Disclaimer: All macros are intended to make C and Assembly code more readable.
606 ** Use these macros carefully, as any that do left shifts for field
607 ** depositing will result in the lower order bits being destroyed. Any
608 ** macro that shifts left to properly position the bit-field should be
609 ** used as part of an OR to initialize a register and NOT as a dynamic
610 ** modifier UNLESS the lower order bits are saved and ORed back in when
611 ** the macro is used.
612 *************************************************************************************/
614 ** ********************* PLL AND RESET MASKS ****************************************/
616 #define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */
617 #define PLL_OFF 0x0002 /* PLL Not Powered */
618 #define STOPCK 0x0008 /* Core Clock Off */
619 #define PDWN 0x0020 /* Enter Deep Sleep Mode */
620 #define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */
621 #define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */
622 #define BYPASS 0x0100 /* Bypass the PLL */
623 #define MSEL 0x7E00 /* Multiplier Select For CCLK/VCO Factors */
624 /* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits) */
625 #define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */
628 #define SSEL 0x000F /* System Select */
629 #define CSEL 0x0030 /* Core Select */
630 #define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */
631 #define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */
632 #define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */
633 #define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */
635 #define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */
638 #define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */
639 #define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */
640 #define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */
641 #define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */
642 #define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */
644 #define GAIN 0x000C /* Voltage Level Gain */
645 #define GAIN_5 0x0000 /* GAIN = 5 */
646 #define GAIN_10 0x0004 /* GAIN = 10 */
647 #define GAIN_20 0x0008 /* GAIN = 20 */
648 #define GAIN_50 0x000C /* GAIN = 50 */
650 #define VLEV 0x00F0 /* Internal Voltage Level */
651 #define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */
652 #define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */
653 #define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */
654 #define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */
655 #define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */
656 #define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */
657 #define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */
658 #define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */
659 #define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */
660 #define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */
662 #define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */
663 #define CANWE 0x0200 /* Enable CAN Wakeup From Hibernate */
664 #define PHYWE 0x0400 /* Enable PHY Wakeup From Hibernate */
665 #define CLKBUFOE 0x4000 /* CLKIN Buffer Output Enable */
666 #define PHYCLKOE CLKBUFOE /* Alternative legacy name for the above */
667 #define SCKELOW 0x8000 /* Enable Drive CKE Low During Reset */
670 #define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */
671 #define FULL_ON 0x0002 /* Processor In Full On Mode */
672 #define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */
673 #define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */
676 #define CHIPID_VERSION 0xF0000000
677 #define CHIPID_FAMILY 0x0FFFF000
678 #define CHIPID_MANUFACTURE 0x00000FFE
681 #define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */
682 #define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */
683 #define RESET_DOUBLE 0x2000 /* SW Reset Generated By Core Double-Fault */
684 #define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */
685 #define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */
688 #define BMODE 0x0007 /* Boot Mode - Latched During HW Reset From Mode Pins */
689 #define NOBOOT 0x0010 /* Execute From L1 or ASYNC Bank 0 When BMODE = 0 */
692 /* ************* SYSTEM INTERRUPT CONTROLLER MASKS *************************************/
693 /* Peripheral Masks For SIC_ISR, SIC_IWR, SIC_IMASK */
696 #define IRQ_PLL_WAKEUP 0x00000001 /* PLL Wakeup Interrupt */
698 #define IRQ_ERROR1 0x00000002 /* Error Interrupt (DMA, DMARx Block, DMARx Overflow) */
699 #define IRQ_ERROR2 0x00000004 /* Error Interrupt (CAN, Ethernet, SPORTx, PPI, SPI, UARTx) */
700 #define IRQ_RTC 0x00000008 /* Real Time Clock Interrupt */
701 #define IRQ_DMA0 0x00000010 /* DMA Channel 0 (PPI) Interrupt */
702 #define IRQ_DMA3 0x00000020 /* DMA Channel 3 (SPORT0 RX) Interrupt */
703 #define IRQ_DMA4 0x00000040 /* DMA Channel 4 (SPORT0 TX) Interrupt */
704 #define IRQ_DMA5 0x00000080 /* DMA Channel 5 (SPORT1 RX) Interrupt */
706 #define IRQ_DMA6 0x00000100 /* DMA Channel 6 (SPORT1 TX) Interrupt */
707 #define IRQ_TWI 0x00000200 /* TWI Interrupt */
708 #define IRQ_DMA7 0x00000400 /* DMA Channel 7 (SPI) Interrupt */
709 #define IRQ_DMA8 0x00000800 /* DMA Channel 8 (UART0 RX) Interrupt */
710 #define IRQ_DMA9 0x00001000 /* DMA Channel 9 (UART0 TX) Interrupt */
711 #define IRQ_DMA10 0x00002000 /* DMA Channel 10 (UART1 RX) Interrupt */
712 #define IRQ_DMA11 0x00004000 /* DMA Channel 11 (UART1 TX) Interrupt */
713 #define IRQ_CAN_RX 0x00008000 /* CAN Receive Interrupt */
715 #define IRQ_CAN_TX 0x00010000 /* CAN Transmit Interrupt */
716 #define IRQ_DMA1 0x00020000 /* DMA Channel 1 (Ethernet RX) Interrupt */
717 #define IRQ_PFA_PORTH 0x00020000 /* PF Port H (PF47:32) Interrupt A */
718 #define IRQ_DMA2 0x00040000 /* DMA Channel 2 (Ethernet TX) Interrupt */
719 #define IRQ_PFB_PORTH 0x00040000 /* PF Port H (PF47:32) Interrupt B */
720 #define IRQ_TIMER0 0x00080000 /* Timer 0 Interrupt */
721 #define IRQ_TIMER1 0x00100000 /* Timer 1 Interrupt */
722 #define IRQ_TIMER2 0x00200000 /* Timer 2 Interrupt */
723 #define IRQ_TIMER3 0x00400000 /* Timer 3 Interrupt */
724 #define IRQ_TIMER4 0x00800000 /* Timer 4 Interrupt */
726 #define IRQ_TIMER5 0x01000000 /* Timer 5 Interrupt */
727 #define IRQ_TIMER6 0x02000000 /* Timer 6 Interrupt */
728 #define IRQ_TIMER7 0x04000000 /* Timer 7 Interrupt */
729 #define IRQ_PFA_PORTFG 0x08000000 /* PF Ports F&G (PF31:0) Interrupt A */
730 #define IRQ_PFB_PORTF 0x80000000 /* PF Port F (PF15:0) Interrupt B */
731 #define IRQ_DMA12 0x20000000 /* DMA Channels 12 (MDMA1 Source) RX Interrupt */
732 #define IRQ_DMA13 0x20000000 /* DMA Channels 13 (MDMA1 Destination) TX Interrupt */
733 #define IRQ_DMA14 0x40000000 /* DMA Channels 14 (MDMA0 Source) RX Interrupt */
734 #define IRQ_DMA15 0x40000000 /* DMA Channels 15 (MDMA0 Destination) TX Interrupt */
735 #define IRQ_WDOG 0x80000000 /* Software Watchdog Timer Interrupt */
736 #define IRQ_PFB_PORTG 0x10000000 /* PF Port G (PF31:16) Interrupt B */
739 /* SIC_IAR0 Macros */
740 #define P0_IVG(x) (((x)&0xF)-7) /* Peripheral #0 assigned IVG #x */
741 #define P1_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #1 assigned IVG #x */
742 #define P2_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #2 assigned IVG #x */
743 #define P3_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #3 assigned IVG #x */
744 #define P4_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #4 assigned IVG #x */
745 #define P5_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #5 assigned IVG #x */
746 #define P6_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #6 assigned IVG #x */
747 #define P7_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #7 assigned IVG #x */
749 /* SIC_IAR1 Macros */
750 #define P8_IVG(x) (((x)&0xF)-7) /* Peripheral #8 assigned IVG #x */
751 #define P9_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #9 assigned IVG #x */
752 #define P10_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #10 assigned IVG #x */
753 #define P11_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #11 assigned IVG #x */
754 #define P12_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #12 assigned IVG #x */
755 #define P13_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #13 assigned IVG #x */
756 #define P14_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #14 assigned IVG #x */
757 #define P15_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #15 assigned IVG #x */
759 /* SIC_IAR2 Macros */
760 #define P16_IVG(x) (((x)&0xF)-7) /* Peripheral #16 assigned IVG #x */
761 #define P17_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #17 assigned IVG #x */
762 #define P18_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #18 assigned IVG #x */
763 #define P19_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #19 assigned IVG #x */
764 #define P20_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #20 assigned IVG #x */
765 #define P21_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #21 assigned IVG #x */
766 #define P22_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #22 assigned IVG #x */
767 #define P23_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #23 assigned IVG #x */
769 /* SIC_IAR3 Macros */
770 #define P24_IVG(x) (((x)&0xF)-7) /* Peripheral #24 assigned IVG #x */
771 #define P25_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #25 assigned IVG #x */
772 #define P26_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #26 assigned IVG #x */
773 #define P27_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #27 assigned IVG #x */
774 #define P28_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #28 assigned IVG #x */
775 #define P29_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #29 assigned IVG #x */
776 #define P30_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #30 assigned IVG #x */
777 #define P31_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #31 assigned IVG #x */
780 /* SIC_IMASK Masks */
781 #define SIC_UNMASK_ALL 0x00000000 /* Unmask all peripheral interrupts */
782 #define SIC_MASK_ALL 0xFFFFFFFF /* Mask all peripheral interrupts */
783 #define SIC_MASK(x) (1 << ((x)&0x1F)) /* Mask Peripheral #x interrupt */
784 #define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Unmask Peripheral #x interrupt */
787 #define IWR_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */
788 #define IWR_ENABLE_ALL 0xFFFFFFFF /* Wakeup Enable all peripherals */
789 #define IWR_ENABLE(x) (1 << ((x)&0x1F)) /* Wakeup Enable Peripheral #x */
790 #define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Wakeup Disable Peripheral #x */
793 /* ********* WATCHDOG TIMER MASKS ******************** */
795 /* Watchdog Timer WDOG_CTL Register Masks */
797 #define WDEV(x) (((x)<<1) & 0x0006) /* event generated on roll over */
798 #define WDEV_RESET 0x0000 /* generate reset event on roll over */
799 #define WDEV_NMI 0x0002 /* generate NMI event on roll over */
800 #define WDEV_GPI 0x0004 /* generate GP IRQ on roll over */
801 #define WDEV_NONE 0x0006 /* no event on roll over */
802 #define WDEN 0x0FF0 /* enable watchdog */
803 #define WDDIS 0x0AD0 /* disable watchdog */
804 #define WDRO 0x8000 /* watchdog rolled over latch */
806 /* depreciated WDOG_CTL Register Masks for legacy code */
810 #define ENABLE_RESET WDEV_RESET
811 #define WDOG_RESET WDEV_RESET
812 #define ENABLE_NMI WDEV_NMI
813 #define WDOG_NMI WDEV_NMI
814 #define ENABLE_GPI WDEV_GPI
815 #define WDOG_GPI WDEV_GPI
816 #define DISABLE_EVT WDEV_NONE
817 #define WDOG_NONE WDEV_NONE
820 #define TMR_DIS WDDIS
828 /* *************** REAL TIME CLOCK MASKS **************************/
829 /* RTC_STAT and RTC_ALARM Masks */
830 #define RTC_SEC 0x0000003F /* Real-Time Clock Seconds */
831 #define RTC_MIN 0x00000FC0 /* Real-Time Clock Minutes */
832 #define RTC_HR 0x0001F000 /* Real-Time Clock Hours */
833 #define RTC_DAY 0xFFFE0000 /* Real-Time Clock Days */
835 /* RTC_ALARM Macro z=day y=hr x=min w=sec */
836 #define SET_ALARM(z,y,x,w) ((((z)&0x7FFF)<<0x11)|(((y)&0x1F)<<0xC)|(((x)&0x3F)<<0x6)|((w)&0x3F))
838 /* RTC_ICTL and RTC_ISTAT Masks */
839 #define STOPWATCH 0x0001 /* Stopwatch Interrupt Enable */
840 #define ALARM 0x0002 /* Alarm Interrupt Enable */
841 #define SECOND 0x0004 /* Seconds (1 Hz) Interrupt Enable */
842 #define MINUTE 0x0008 /* Minutes Interrupt Enable */
843 #define HOUR 0x0010 /* Hours Interrupt Enable */
844 #define DAY 0x0020 /* 24 Hours (Days) Interrupt Enable */
845 #define DAY_ALARM 0x0040 /* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable */
846 #define WRITE_PENDING 0x4000 /* Write Pending Status */
847 #define WRITE_COMPLETE 0x8000 /* Write Complete Interrupt Enable */
849 /* RTC_FAST / RTC_PREN Mask */
850 #define PREN 0x0001 /* Enable Prescaler, RTC Runs @1 Hz */
853 /* ************** UART CONTROLLER MASKS *************************/
854 /* UARTx_LCR Masks */
855 #define WLS(x) (((x)-5) & 0x03) /* Word Length Select */
856 #define STB 0x04 /* Stop Bits */
857 #define PEN 0x08 /* Parity Enable */
858 #define EPS 0x10 /* Even Parity Select */
859 #define STP 0x20 /* Stick Parity */
860 #define SB 0x40 /* Set Break */
861 #define DLAB 0x80 /* Divisor Latch Access */
864 #define LOOP_ENA 0x10 /* Loopback Mode Enable */
865 #define LOOP_ENA_P 0x04
867 /* UARTx_LSR Masks */
868 #define DR 0x01 /* Data Ready */
869 #define OE 0x02 /* Overrun Error */
870 #define PE 0x04 /* Parity Error */
871 #define FE 0x08 /* Framing Error */
872 #define BI 0x10 /* Break Interrupt */
873 #define THRE 0x20 /* THR Empty */
874 #define TEMT 0x40 /* TSR and UART_THR Empty */
876 /* UARTx_IER Masks */
877 #define ERBFI 0x01 /* Enable Receive Buffer Full Interrupt */
878 #define ETBEI 0x02 /* Enable Transmit Buffer Empty Interrupt */
879 #define ELSI 0x04 /* Enable RX Status Interrupt */
881 /* UARTx_IIR Masks */
882 #define NINT 0x01 /* Pending Interrupt */
883 #define IIR_TX_READY 0x02 /* UART_THR empty */
884 #define IIR_RX_READY 0x04 /* Receive data ready */
885 #define IIR_LINE_CHANGE 0x06 /* Receive line status */
886 #define IIR_STATUS 0x06 /* Highest Priority Pending Interrupt */
888 /* UARTx_GCTL Masks */
889 #define UCEN 0x01 /* Enable UARTx Clocks */
890 #define IREN 0x02 /* Enable IrDA Mode */
891 #define TPOLC 0x04 /* IrDA TX Polarity Change */
892 #define RPOLC 0x08 /* IrDA RX Polarity Change */
893 #define FPE 0x10 /* Force Parity Error On Transmit */
894 #define FFE 0x20 /* Force Framing Error On Transmit */
897 /* *********** SERIAL PERIPHERAL INTERFACE (SPI) MASKS ****************************/
899 #define TIMOD 0x0003 /* Transfer Initiate Mode */
900 #define RDBR_CORE 0x0000 /* RDBR Read Initiates, IRQ When RDBR Full */
901 #define TDBR_CORE 0x0001 /* TDBR Write Initiates, IRQ When TDBR Empty */
902 #define RDBR_DMA 0x0002 /* DMA Read, DMA Until FIFO Empty */
903 #define TDBR_DMA 0x0003 /* DMA Write, DMA Until FIFO Full */
904 #define SZ 0x0004 /* Send Zero (When TDBR Empty, Send Zero/Last*) */
905 #define GM 0x0008 /* Get More (When RDBR Full, Overwrite/Discard*) */
906 #define PSSE 0x0010 /* Slave-Select Input Enable */
907 #define EMISO 0x0020 /* Enable MISO As Output */
908 #define SIZE 0x0100 /* Size of Words (16/8* Bits) */
909 #define LSBF 0x0200 /* LSB First */
910 #define CPHA 0x0400 /* Clock Phase */
911 #define CPOL 0x0800 /* Clock Polarity */
912 #define MSTR 0x1000 /* Master/Slave* */
913 #define WOM 0x2000 /* Write Open Drain Master */
914 #define SPE 0x4000 /* SPI Enable */
917 #define FLS1 0x0002 /* Enables SPI_FLOUT1 as SPI Slave-Select Output */
918 #define FLS2 0x0004 /* Enables SPI_FLOUT2 as SPI Slave-Select Output */
919 #define FLS3 0x0008 /* Enables SPI_FLOUT3 as SPI Slave-Select Output */
920 #define FLS4 0x0010 /* Enables SPI_FLOUT4 as SPI Slave-Select Output */
921 #define FLS5 0x0020 /* Enables SPI_FLOUT5 as SPI Slave-Select Output */
922 #define FLS6 0x0040 /* Enables SPI_FLOUT6 as SPI Slave-Select Output */
923 #define FLS7 0x0080 /* Enables SPI_FLOUT7 as SPI Slave-Select Output */
924 #define FLG1 0xFDFF /* Activates SPI_FLOUT1 */
925 #define FLG2 0xFBFF /* Activates SPI_FLOUT2 */
926 #define FLG3 0xF7FF /* Activates SPI_FLOUT3 */
927 #define FLG4 0xEFFF /* Activates SPI_FLOUT4 */
928 #define FLG5 0xDFFF /* Activates SPI_FLOUT5 */
929 #define FLG6 0xBFFF /* Activates SPI_FLOUT6 */
930 #define FLG7 0x7FFF /* Activates SPI_FLOUT7 */
933 #define SPIF 0x0001 /* SPI Finished (Single-Word Transfer Complete) */
934 #define MODF 0x0002 /* Mode Fault Error (Another Device Tried To Become Master) */
935 #define TXE 0x0004 /* Transmission Error (Data Sent With No New Data In TDBR) */
936 #define TXS 0x0008 /* SPI_TDBR Data Buffer Status (Full/Empty*) */
937 #define RBSY 0x0010 /* Receive Error (Data Received With RDBR Full) */
938 #define RXS 0x0020 /* SPI_RDBR Data Buffer Status (Full/Empty*) */
939 #define TXCOL 0x0040 /* Transmit Collision Error (Corrupt Data May Have Been Sent) */
942 /* **************** GENERAL PURPOSE TIMER MASKS **********************/
943 /* TIMER_ENABLE Masks */
944 #define TIMEN0 0x0001 /* Enable Timer 0 */
945 #define TIMEN1 0x0002 /* Enable Timer 1 */
946 #define TIMEN2 0x0004 /* Enable Timer 2 */
947 #define TIMEN3 0x0008 /* Enable Timer 3 */
948 #define TIMEN4 0x0010 /* Enable Timer 4 */
949 #define TIMEN5 0x0020 /* Enable Timer 5 */
950 #define TIMEN6 0x0040 /* Enable Timer 6 */
951 #define TIMEN7 0x0080 /* Enable Timer 7 */
953 /* TIMER_DISABLE Masks */
954 #define TIMDIS0 TIMEN0 /* Disable Timer 0 */
955 #define TIMDIS1 TIMEN1 /* Disable Timer 1 */
956 #define TIMDIS2 TIMEN2 /* Disable Timer 2 */
957 #define TIMDIS3 TIMEN3 /* Disable Timer 3 */
958 #define TIMDIS4 TIMEN4 /* Disable Timer 4 */
959 #define TIMDIS5 TIMEN5 /* Disable Timer 5 */
960 #define TIMDIS6 TIMEN6 /* Disable Timer 6 */
961 #define TIMDIS7 TIMEN7 /* Disable Timer 7 */
963 /* TIMER_STATUS Masks */
964 #define TIMIL0 0x00000001 /* Timer 0 Interrupt */
965 #define TIMIL1 0x00000002 /* Timer 1 Interrupt */
966 #define TIMIL2 0x00000004 /* Timer 2 Interrupt */
967 #define TIMIL3 0x00000008 /* Timer 3 Interrupt */
968 #define TOVF_ERR0 0x00000010 /* Timer 0 Counter Overflow */
969 #define TOVF_ERR1 0x00000020 /* Timer 1 Counter Overflow */
970 #define TOVF_ERR2 0x00000040 /* Timer 2 Counter Overflow */
971 #define TOVF_ERR3 0x00000080 /* Timer 3 Counter Overflow */
972 #define TRUN0 0x00001000 /* Timer 0 Slave Enable Status */
973 #define TRUN1 0x00002000 /* Timer 1 Slave Enable Status */
974 #define TRUN2 0x00004000 /* Timer 2 Slave Enable Status */
975 #define TRUN3 0x00008000 /* Timer 3 Slave Enable Status */
976 #define TIMIL4 0x00010000 /* Timer 4 Interrupt */
977 #define TIMIL5 0x00020000 /* Timer 5 Interrupt */
978 #define TIMIL6 0x00040000 /* Timer 6 Interrupt */
979 #define TIMIL7 0x00080000 /* Timer 7 Interrupt */
980 #define TOVF_ERR4 0x00100000 /* Timer 4 Counter Overflow */
981 #define TOVF_ERR5 0x00200000 /* Timer 5 Counter Overflow */
982 #define TOVF_ERR6 0x00400000 /* Timer 6 Counter Overflow */
983 #define TOVF_ERR7 0x00800000 /* Timer 7 Counter Overflow */
984 #define TRUN4 0x10000000 /* Timer 4 Slave Enable Status */
985 #define TRUN5 0x20000000 /* Timer 5 Slave Enable Status */
986 #define TRUN6 0x40000000 /* Timer 6 Slave Enable Status */
987 #define TRUN7 0x80000000 /* Timer 7 Slave Enable Status */
989 /* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
990 #define TOVL_ERR0 TOVF_ERR0
991 #define TOVL_ERR1 TOVF_ERR1
992 #define TOVL_ERR2 TOVF_ERR2
993 #define TOVL_ERR3 TOVF_ERR3
994 #define TOVL_ERR4 TOVF_ERR4
995 #define TOVL_ERR5 TOVF_ERR5
996 #define TOVL_ERR6 TOVF_ERR6
997 #define TOVL_ERR7 TOVF_ERR7
999 /* TIMERx_CONFIG Masks */
1000 #define PWM_OUT 0x0001 /* Pulse-Width Modulation Output Mode */
1001 #define WDTH_CAP 0x0002 /* Width Capture Input Mode */
1002 #define EXT_CLK 0x0003 /* External Clock Mode */
1003 #define PULSE_HI 0x0004 /* Action Pulse (Positive/Negative*) */
1004 #define PERIOD_CNT 0x0008 /* Period Count */
1005 #define IRQ_ENA 0x0010 /* Interrupt Request Enable */
1006 #define TIN_SEL 0x0020 /* Timer Input Select */
1007 #define OUT_DIS 0x0040 /* Output Pad Disable */
1008 #define CLK_SEL 0x0080 /* Timer Clock Select */
1009 #define TOGGLE_HI 0x0100 /* PWM_OUT PULSE_HI Toggle Mode */
1010 #define EMU_RUN 0x0200 /* Emulation Behavior Select */
1011 #define ERR_TYP 0xC000 /* Error Type */
1014 /* ****************** GPIO PORTS F, G, H MASKS ***********************/
1015 /* General Purpose IO (0xFFC00700 - 0xFFC007FF) Masks */
1071 /* ******************* SERIAL PORT MASKS **************************************/
1072 /* SPORTx_TCR1 Masks */
1073 #define TSPEN 0x0001 /* Transmit Enable */
1074 #define ITCLK 0x0002 /* Internal Transmit Clock Select */
1075 #define DTYPE_NORM 0x0004 /* Data Format Normal */
1076 #define DTYPE_ULAW 0x0008 /* Compand Using u-Law */
1077 #define DTYPE_ALAW 0x000C /* Compand Using A-Law */
1078 #define TLSBIT 0x0010 /* Transmit Bit Order */
1079 #define ITFS 0x0200 /* Internal Transmit Frame Sync Select */
1080 #define TFSR 0x0400 /* Transmit Frame Sync Required Select */
1081 #define DITFS 0x0800 /* Data-Independent Transmit Frame Sync Select */
1082 #define LTFS 0x1000 /* Low Transmit Frame Sync Select */
1083 #define LATFS 0x2000 /* Late Transmit Frame Sync Select */
1084 #define TCKFE 0x4000 /* Clock Falling Edge Select */
1086 /* SPORTx_TCR2 Masks and Macro */
1087 #define SLEN(x) ((x)&0x1F) /* SPORT TX Word Length (2 - 31) */
1088 #define TXSE 0x0100 /* TX Secondary Enable */
1089 #define TSFSE 0x0200 /* Transmit Stereo Frame Sync Enable */
1090 #define TRFST 0x0400 /* Left/Right Order (1 = Right Channel 1st) */
1092 /* SPORTx_RCR1 Masks */
1093 #define RSPEN 0x0001 /* Receive Enable */
1094 #define IRCLK 0x0002 /* Internal Receive Clock Select */
1095 #define DTYPE_NORM 0x0004 /* Data Format Normal */
1096 #define DTYPE_ULAW 0x0008 /* Compand Using u-Law */
1097 #define DTYPE_ALAW 0x000C /* Compand Using A-Law */
1098 #define RLSBIT 0x0010 /* Receive Bit Order */
1099 #define IRFS 0x0200 /* Internal Receive Frame Sync Select */
1100 #define RFSR 0x0400 /* Receive Frame Sync Required Select */
1101 #define LRFS 0x1000 /* Low Receive Frame Sync Select */
1102 #define LARFS 0x2000 /* Late Receive Frame Sync Select */
1103 #define RCKFE 0x4000 /* Clock Falling Edge Select */
1105 /* SPORTx_RCR2 Masks */
1106 #define SLEN(x) ((x)&0x1F) /* SPORT RX Word Length (2 - 31) */
1107 #define RXSE 0x0100 /* RX Secondary Enable */
1108 #define RSFSE 0x0200 /* RX Stereo Frame Sync Enable */
1109 #define RRFST 0x0400 /* Right-First Data Order */
1111 /* SPORTx_STAT Masks */
1112 #define RXNE 0x0001 /* Receive FIFO Not Empty Status */
1113 #define RUVF 0x0002 /* Sticky Receive Underflow Status */
1114 #define ROVF 0x0004 /* Sticky Receive Overflow Status */
1115 #define TXF 0x0008 /* Transmit FIFO Full Status */
1116 #define TUVF 0x0010 /* Sticky Transmit Underflow Status */
1117 #define TOVF 0x0020 /* Sticky Transmit Overflow Status */
1118 #define TXHRE 0x0040 /* Transmit Hold Register Empty */
1120 /* SPORTx_MCMC1 Macros */
1121 #define SP_WOFF(x) ((x) & 0x3FF) /* Multichannel Window Offset Field */
1123 /* Only use WSIZE Macro With Logic OR While Setting Lower Order Bits */
1124 #define SP_WSIZE(x) (((((x)>>0x3)-1)&0xF) << 0xC) /* Multichannel Window Size = (x/8)-1 */
1126 /* SPORTx_MCMC2 Masks */
1127 #define REC_BYPASS 0x0000 /* Bypass Mode (No Clock Recovery) */
1128 #define REC_2FROM4 0x0002 /* Recover 2 MHz Clock from 4 MHz Clock */
1129 #define REC_8FROM16 0x0003 /* Recover 8 MHz Clock from 16 MHz Clock */
1130 #define MCDTXPE 0x0004 /* Multichannel DMA Transmit Packing */
1131 #define MCDRXPE 0x0008 /* Multichannel DMA Receive Packing */
1132 #define MCMEN 0x0010 /* Multichannel Frame Mode Enable */
1133 #define FSDR 0x0080 /* Multichannel Frame Sync to Data Relationship */
1134 #define MFD_0 0x0000 /* Multichannel Frame Delay = 0 */
1135 #define MFD_1 0x1000 /* Multichannel Frame Delay = 1 */
1136 #define MFD_2 0x2000 /* Multichannel Frame Delay = 2 */
1137 #define MFD_3 0x3000 /* Multichannel Frame Delay = 3 */
1138 #define MFD_4 0x4000 /* Multichannel Frame Delay = 4 */
1139 #define MFD_5 0x5000 /* Multichannel Frame Delay = 5 */
1140 #define MFD_6 0x6000 /* Multichannel Frame Delay = 6 */
1141 #define MFD_7 0x7000 /* Multichannel Frame Delay = 7 */
1142 #define MFD_8 0x8000 /* Multichannel Frame Delay = 8 */
1143 #define MFD_9 0x9000 /* Multichannel Frame Delay = 9 */
1144 #define MFD_10 0xA000 /* Multichannel Frame Delay = 10 */
1145 #define MFD_11 0xB000 /* Multichannel Frame Delay = 11 */
1146 #define MFD_12 0xC000 /* Multichannel Frame Delay = 12 */
1147 #define MFD_13 0xD000 /* Multichannel Frame Delay = 13 */
1148 #define MFD_14 0xE000 /* Multichannel Frame Delay = 14 */
1149 #define MFD_15 0xF000 /* Multichannel Frame Delay = 15 */
1152 /* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS *************************/
1153 /* EBIU_AMGCTL Masks */
1154 #define AMCKEN 0x0001 /* Enable CLKOUT */
1155 #define AMBEN_NONE 0x0000 /* All Banks Disabled */
1156 #define AMBEN_B0 0x0002 /* Enable Async Memory Bank 0 only */
1157 #define AMBEN_B0_B1 0x0004 /* Enable Async Memory Banks 0 & 1 only */
1158 #define AMBEN_B0_B1_B2 0x0006 /* Enable Async Memory Banks 0, 1, and 2 */
1159 #define AMBEN_ALL 0x0008 /* Enable Async Memory Banks (all) 0, 1, 2, and 3 */
1161 /* EBIU_AMBCTL0 Masks */
1162 #define B0RDYEN 0x00000001 /* Bank 0 (B0) RDY Enable */
1163 #define B0RDYPOL 0x00000002 /* B0 RDY Active High */
1164 #define B0TT_1 0x00000004 /* B0 Transition Time (Read to Write) = 1 cycle */
1165 #define B0TT_2 0x00000008 /* B0 Transition Time (Read to Write) = 2 cycles */
1166 #define B0TT_3 0x0000000C /* B0 Transition Time (Read to Write) = 3 cycles */
1167 #define B0TT_4 0x00000000 /* B0 Transition Time (Read to Write) = 4 cycles */
1168 #define B0ST_1 0x00000010 /* B0 Setup Time (AOE to Read/Write) = 1 cycle */
1169 #define B0ST_2 0x00000020 /* B0 Setup Time (AOE to Read/Write) = 2 cycles */
1170 #define B0ST_3 0x00000030 /* B0 Setup Time (AOE to Read/Write) = 3 cycles */
1171 #define B0ST_4 0x00000000 /* B0 Setup Time (AOE to Read/Write) = 4 cycles */
1172 #define B0HT_1 0x00000040 /* B0 Hold Time (~Read/Write to ~AOE) = 1 cycle */
1173 #define B0HT_2 0x00000080 /* B0 Hold Time (~Read/Write to ~AOE) = 2 cycles */
1174 #define B0HT_3 0x000000C0 /* B0 Hold Time (~Read/Write to ~AOE) = 3 cycles */
1175 #define B0HT_0 0x00000000 /* B0 Hold Time (~Read/Write to ~AOE) = 0 cycles */
1176 #define B0RAT_1 0x00000100 /* B0 Read Access Time = 1 cycle */
1177 #define B0RAT_2 0x00000200 /* B0 Read Access Time = 2 cycles */
1178 #define B0RAT_3 0x00000300 /* B0 Read Access Time = 3 cycles */
1179 #define B0RAT_4 0x00000400 /* B0 Read Access Time = 4 cycles */
1180 #define B0RAT_5 0x00000500 /* B0 Read Access Time = 5 cycles */
1181 #define B0RAT_6 0x00000600 /* B0 Read Access Time = 6 cycles */
1182 #define B0RAT_7 0x00000700 /* B0 Read Access Time = 7 cycles */
1183 #define B0RAT_8 0x00000800 /* B0 Read Access Time = 8 cycles */
1184 #define B0RAT_9 0x00000900 /* B0 Read Access Time = 9 cycles */
1185 #define B0RAT_10 0x00000A00 /* B0 Read Access Time = 10 cycles */
1186 #define B0RAT_11 0x00000B00 /* B0 Read Access Time = 11 cycles */
1187 #define B0RAT_12 0x00000C00 /* B0 Read Access Time = 12 cycles */
1188 #define B0RAT_13 0x00000D00 /* B0 Read Access Time = 13 cycles */
1189 #define B0RAT_14 0x00000E00 /* B0 Read Access Time = 14 cycles */
1190 #define B0RAT_15 0x00000F00 /* B0 Read Access Time = 15 cycles */
1191 #define B0WAT_1 0x00001000 /* B0 Write Access Time = 1 cycle */
1192 #define B0WAT_2 0x00002000 /* B0 Write Access Time = 2 cycles */
1193 #define B0WAT_3 0x00003000 /* B0 Write Access Time = 3 cycles */
1194 #define B0WAT_4 0x00004000 /* B0 Write Access Time = 4 cycles */
1195 #define B0WAT_5 0x00005000 /* B0 Write Access Time = 5 cycles */
1196 #define B0WAT_6 0x00006000 /* B0 Write Access Time = 6 cycles */
1197 #define B0WAT_7 0x00007000 /* B0 Write Access Time = 7 cycles */
1198 #define B0WAT_8 0x00008000 /* B0 Write Access Time = 8 cycles */
1199 #define B0WAT_9 0x00009000 /* B0 Write Access Time = 9 cycles */
1200 #define B0WAT_10 0x0000A000 /* B0 Write Access Time = 10 cycles */
1201 #define B0WAT_11 0x0000B000 /* B0 Write Access Time = 11 cycles */
1202 #define B0WAT_12 0x0000C000 /* B0 Write Access Time = 12 cycles */
1203 #define B0WAT_13 0x0000D000 /* B0 Write Access Time = 13 cycles */
1204 #define B0WAT_14 0x0000E000 /* B0 Write Access Time = 14 cycles */
1205 #define B0WAT_15 0x0000F000 /* B0 Write Access Time = 15 cycles */
1207 #define B1RDYEN 0x00010000 /* Bank 1 (B1) RDY Enable */
1208 #define B1RDYPOL 0x00020000 /* B1 RDY Active High */
1209 #define B1TT_1 0x00040000 /* B1 Transition Time (Read to Write) = 1 cycle */
1210 #define B1TT_2 0x00080000 /* B1 Transition Time (Read to Write) = 2 cycles */
1211 #define B1TT_3 0x000C0000 /* B1 Transition Time (Read to Write) = 3 cycles */
1212 #define B1TT_4 0x00000000 /* B1 Transition Time (Read to Write) = 4 cycles */
1213 #define B1ST_1 0x00100000 /* B1 Setup Time (AOE to Read/Write) = 1 cycle */
1214 #define B1ST_2 0x00200000 /* B1 Setup Time (AOE to Read/Write) = 2 cycles */
1215 #define B1ST_3 0x00300000 /* B1 Setup Time (AOE to Read/Write) = 3 cycles */
1216 #define B1ST_4 0x00000000 /* B1 Setup Time (AOE to Read/Write) = 4 cycles */
1217 #define B1HT_1 0x00400000 /* B1 Hold Time (~Read/Write to ~AOE) = 1 cycle */
1218 #define B1HT_2 0x00800000 /* B1 Hold Time (~Read/Write to ~AOE) = 2 cycles */
1219 #define B1HT_3 0x00C00000 /* B1 Hold Time (~Read/Write to ~AOE) = 3 cycles */
1220 #define B1HT_0 0x00000000 /* B1 Hold Time (~Read/Write to ~AOE) = 0 cycles */
1221 #define B1RAT_1 0x01000000 /* B1 Read Access Time = 1 cycle */
1222 #define B1RAT_2 0x02000000 /* B1 Read Access Time = 2 cycles */
1223 #define B1RAT_3 0x03000000 /* B1 Read Access Time = 3 cycles */
1224 #define B1RAT_4 0x04000000 /* B1 Read Access Time = 4 cycles */
1225 #define B1RAT_5 0x05000000 /* B1 Read Access Time = 5 cycles */
1226 #define B1RAT_6 0x06000000 /* B1 Read Access Time = 6 cycles */
1227 #define B1RAT_7 0x07000000 /* B1 Read Access Time = 7 cycles */
1228 #define B1RAT_8 0x08000000 /* B1 Read Access Time = 8 cycles */
1229 #define B1RAT_9 0x09000000 /* B1 Read Access Time = 9 cycles */
1230 #define B1RAT_10 0x0A000000 /* B1 Read Access Time = 10 cycles */
1231 #define B1RAT_11 0x0B000000 /* B1 Read Access Time = 11 cycles */
1232 #define B1RAT_12 0x0C000000 /* B1 Read Access Time = 12 cycles */
1233 #define B1RAT_13 0x0D000000 /* B1 Read Access Time = 13 cycles */
1234 #define B1RAT_14 0x0E000000 /* B1 Read Access Time = 14 cycles */
1235 #define B1RAT_15 0x0F000000 /* B1 Read Access Time = 15 cycles */
1236 #define B1WAT_1 0x10000000 /* B1 Write Access Time = 1 cycle */
1237 #define B1WAT_2 0x20000000 /* B1 Write Access Time = 2 cycles */
1238 #define B1WAT_3 0x30000000 /* B1 Write Access Time = 3 cycles */
1239 #define B1WAT_4 0x40000000 /* B1 Write Access Time = 4 cycles */
1240 #define B1WAT_5 0x50000000 /* B1 Write Access Time = 5 cycles */
1241 #define B1WAT_6 0x60000000 /* B1 Write Access Time = 6 cycles */
1242 #define B1WAT_7 0x70000000 /* B1 Write Access Time = 7 cycles */
1243 #define B1WAT_8 0x80000000 /* B1 Write Access Time = 8 cycles */
1244 #define B1WAT_9 0x90000000 /* B1 Write Access Time = 9 cycles */
1245 #define B1WAT_10 0xA0000000 /* B1 Write Access Time = 10 cycles */
1246 #define B1WAT_11 0xB0000000 /* B1 Write Access Time = 11 cycles */
1247 #define B1WAT_12 0xC0000000 /* B1 Write Access Time = 12 cycles */
1248 #define B1WAT_13 0xD0000000 /* B1 Write Access Time = 13 cycles */
1249 #define B1WAT_14 0xE0000000 /* B1 Write Access Time = 14 cycles */
1250 #define B1WAT_15 0xF0000000 /* B1 Write Access Time = 15 cycles */
1252 /* EBIU_AMBCTL1 Masks */
1253 #define B2RDYEN 0x00000001 /* Bank 2 (B2) RDY Enable */
1254 #define B2RDYPOL 0x00000002 /* B2 RDY Active High */
1255 #define B2TT_1 0x00000004 /* B2 Transition Time (Read to Write) = 1 cycle */
1256 #define B2TT_2 0x00000008 /* B2 Transition Time (Read to Write) = 2 cycles */
1257 #define B2TT_3 0x0000000C /* B2 Transition Time (Read to Write) = 3 cycles */
1258 #define B2TT_4 0x00000000 /* B2 Transition Time (Read to Write) = 4 cycles */
1259 #define B2ST_1 0x00000010 /* B2 Setup Time (AOE to Read/Write) = 1 cycle */
1260 #define B2ST_2 0x00000020 /* B2 Setup Time (AOE to Read/Write) = 2 cycles */
1261 #define B2ST_3 0x00000030 /* B2 Setup Time (AOE to Read/Write) = 3 cycles */
1262 #define B2ST_4 0x00000000 /* B2 Setup Time (AOE to Read/Write) = 4 cycles */
1263 #define B2HT_1 0x00000040 /* B2 Hold Time (~Read/Write to ~AOE) = 1 cycle */
1264 #define B2HT_2 0x00000080 /* B2 Hold Time (~Read/Write to ~AOE) = 2 cycles */
1265 #define B2HT_3 0x000000C0 /* B2 Hold Time (~Read/Write to ~AOE) = 3 cycles */
1266 #define B2HT_0 0x00000000 /* B2 Hold Time (~Read/Write to ~AOE) = 0 cycles */
1267 #define B2RAT_1 0x00000100 /* B2 Read Access Time = 1 cycle */
1268 #define B2RAT_2 0x00000200 /* B2 Read Access Time = 2 cycles */
1269 #define B2RAT_3 0x00000300 /* B2 Read Access Time = 3 cycles */
1270 #define B2RAT_4 0x00000400 /* B2 Read Access Time = 4 cycles */
1271 #define B2RAT_5 0x00000500 /* B2 Read Access Time = 5 cycles */
1272 #define B2RAT_6 0x00000600 /* B2 Read Access Time = 6 cycles */
1273 #define B2RAT_7 0x00000700 /* B2 Read Access Time = 7 cycles */
1274 #define B2RAT_8 0x00000800 /* B2 Read Access Time = 8 cycles */
1275 #define B2RAT_9 0x00000900 /* B2 Read Access Time = 9 cycles */
1276 #define B2RAT_10 0x00000A00 /* B2 Read Access Time = 10 cycles */
1277 #define B2RAT_11 0x00000B00 /* B2 Read Access Time = 11 cycles */
1278 #define B2RAT_12 0x00000C00 /* B2 Read Access Time = 12 cycles */
1279 #define B2RAT_13 0x00000D00 /* B2 Read Access Time = 13 cycles */
1280 #define B2RAT_14 0x00000E00 /* B2 Read Access Time = 14 cycles */
1281 #define B2RAT_15 0x00000F00 /* B2 Read Access Time = 15 cycles */
1282 #define B2WAT_1 0x00001000 /* B2 Write Access Time = 1 cycle */
1283 #define B2WAT_2 0x00002000 /* B2 Write Access Time = 2 cycles */
1284 #define B2WAT_3 0x00003000 /* B2 Write Access Time = 3 cycles */
1285 #define B2WAT_4 0x00004000 /* B2 Write Access Time = 4 cycles */
1286 #define B2WAT_5 0x00005000 /* B2 Write Access Time = 5 cycles */
1287 #define B2WAT_6 0x00006000 /* B2 Write Access Time = 6 cycles */
1288 #define B2WAT_7 0x00007000 /* B2 Write Access Time = 7 cycles */
1289 #define B2WAT_8 0x00008000 /* B2 Write Access Time = 8 cycles */
1290 #define B2WAT_9 0x00009000 /* B2 Write Access Time = 9 cycles */
1291 #define B2WAT_10 0x0000A000 /* B2 Write Access Time = 10 cycles */
1292 #define B2WAT_11 0x0000B000 /* B2 Write Access Time = 11 cycles */
1293 #define B2WAT_12 0x0000C000 /* B2 Write Access Time = 12 cycles */
1294 #define B2WAT_13 0x0000D000 /* B2 Write Access Time = 13 cycles */
1295 #define B2WAT_14 0x0000E000 /* B2 Write Access Time = 14 cycles */
1296 #define B2WAT_15 0x0000F000 /* B2 Write Access Time = 15 cycles */
1298 #define B3RDYEN 0x00010000 /* Bank 3 (B3) RDY Enable */
1299 #define B3RDYPOL 0x00020000 /* B3 RDY Active High */
1300 #define B3TT_1 0x00040000 /* B3 Transition Time (Read to Write) = 1 cycle */
1301 #define B3TT_2 0x00080000 /* B3 Transition Time (Read to Write) = 2 cycles */
1302 #define B3TT_3 0x000C0000 /* B3 Transition Time (Read to Write) = 3 cycles */
1303 #define B3TT_4 0x00000000 /* B3 Transition Time (Read to Write) = 4 cycles */
1304 #define B3ST_1 0x00100000 /* B3 Setup Time (AOE to Read/Write) = 1 cycle */
1305 #define B3ST_2 0x00200000 /* B3 Setup Time (AOE to Read/Write) = 2 cycles */
1306 #define B3ST_3 0x00300000 /* B3 Setup Time (AOE to Read/Write) = 3 cycles */
1307 #define B3ST_4 0x00000000 /* B3 Setup Time (AOE to Read/Write) = 4 cycles */
1308 #define B3HT_1 0x00400000 /* B3 Hold Time (~Read/Write to ~AOE) = 1 cycle */
1309 #define B3HT_2 0x00800000 /* B3 Hold Time (~Read/Write to ~AOE) = 2 cycles */
1310 #define B3HT_3 0x00C00000 /* B3 Hold Time (~Read/Write to ~AOE) = 3 cycles */
1311 #define B3HT_0 0x00000000 /* B3 Hold Time (~Read/Write to ~AOE) = 0 cycles */
1312 #define B3RAT_1 0x01000000 /* B3 Read Access Time = 1 cycle */
1313 #define B3RAT_2 0x02000000 /* B3 Read Access Time = 2 cycles */
1314 #define B3RAT_3 0x03000000 /* B3 Read Access Time = 3 cycles */
1315 #define B3RAT_4 0x04000000 /* B3 Read Access Time = 4 cycles */
1316 #define B3RAT_5 0x05000000 /* B3 Read Access Time = 5 cycles */
1317 #define B3RAT_6 0x06000000 /* B3 Read Access Time = 6 cycles */
1318 #define B3RAT_7 0x07000000 /* B3 Read Access Time = 7 cycles */
1319 #define B3RAT_8 0x08000000 /* B3 Read Access Time = 8 cycles */
1320 #define B3RAT_9 0x09000000 /* B3 Read Access Time = 9 cycles */
1321 #define B3RAT_10 0x0A000000 /* B3 Read Access Time = 10 cycles */
1322 #define B3RAT_11 0x0B000000 /* B3 Read Access Time = 11 cycles */
1323 #define B3RAT_12 0x0C000000 /* B3 Read Access Time = 12 cycles */
1324 #define B3RAT_13 0x0D000000 /* B3 Read Access Time = 13 cycles */
1325 #define B3RAT_14 0x0E000000 /* B3 Read Access Time = 14 cycles */
1326 #define B3RAT_15 0x0F000000 /* B3 Read Access Time = 15 cycles */
1327 #define B3WAT_1 0x10000000 /* B3 Write Access Time = 1 cycle */
1328 #define B3WAT_2 0x20000000 /* B3 Write Access Time = 2 cycles */
1329 #define B3WAT_3 0x30000000 /* B3 Write Access Time = 3 cycles */
1330 #define B3WAT_4 0x40000000 /* B3 Write Access Time = 4 cycles */
1331 #define B3WAT_5 0x50000000 /* B3 Write Access Time = 5 cycles */
1332 #define B3WAT_6 0x60000000 /* B3 Write Access Time = 6 cycles */
1333 #define B3WAT_7 0x70000000 /* B3 Write Access Time = 7 cycles */
1334 #define B3WAT_8 0x80000000 /* B3 Write Access Time = 8 cycles */
1335 #define B3WAT_9 0x90000000 /* B3 Write Access Time = 9 cycles */
1336 #define B3WAT_10 0xA0000000 /* B3 Write Access Time = 10 cycles */
1337 #define B3WAT_11 0xB0000000 /* B3 Write Access Time = 11 cycles */
1338 #define B3WAT_12 0xC0000000 /* B3 Write Access Time = 12 cycles */
1339 #define B3WAT_13 0xD0000000 /* B3 Write Access Time = 13 cycles */
1340 #define B3WAT_14 0xE0000000 /* B3 Write Access Time = 14 cycles */
1341 #define B3WAT_15 0xF0000000 /* B3 Write Access Time = 15 cycles */
1344 /* ********************** SDRAM CONTROLLER MASKS **********************************************/
1345 /* EBIU_SDGCTL Masks */
1346 #define SCTLE 0x00000001 /* Enable SDRAM Signals */
1347 #define CL_2 0x00000008 /* SDRAM CAS Latency = 2 cycles */
1348 #define CL_3 0x0000000C /* SDRAM CAS Latency = 3 cycles */
1349 #define PASR_ALL 0x00000000 /* All 4 SDRAM Banks Refreshed In Self-Refresh */
1350 #define PASR_B0_B1 0x00000010 /* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh */
1351 #define PASR_B0 0x00000020 /* Only SDRAM Bank 0 Is Refreshed In Self-Refresh */
1352 #define TRAS_1 0x00000040 /* SDRAM tRAS = 1 cycle */
1353 #define TRAS_2 0x00000080 /* SDRAM tRAS = 2 cycles */
1354 #define TRAS_3 0x000000C0 /* SDRAM tRAS = 3 cycles */
1355 #define TRAS_4 0x00000100 /* SDRAM tRAS = 4 cycles */
1356 #define TRAS_5 0x00000140 /* SDRAM tRAS = 5 cycles */
1357 #define TRAS_6 0x00000180 /* SDRAM tRAS = 6 cycles */
1358 #define TRAS_7 0x000001C0 /* SDRAM tRAS = 7 cycles */
1359 #define TRAS_8 0x00000200 /* SDRAM tRAS = 8 cycles */
1360 #define TRAS_9 0x00000240 /* SDRAM tRAS = 9 cycles */
1361 #define TRAS_10 0x00000280 /* SDRAM tRAS = 10 cycles */
1362 #define TRAS_11 0x000002C0 /* SDRAM tRAS = 11 cycles */
1363 #define TRAS_12 0x00000300 /* SDRAM tRAS = 12 cycles */
1364 #define TRAS_13 0x00000340 /* SDRAM tRAS = 13 cycles */
1365 #define TRAS_14 0x00000380 /* SDRAM tRAS = 14 cycles */
1366 #define TRAS_15 0x000003C0 /* SDRAM tRAS = 15 cycles */
1367 #define TRP_1 0x00000800 /* SDRAM tRP = 1 cycle */
1368 #define TRP_2 0x00001000 /* SDRAM tRP = 2 cycles */
1369 #define TRP_3 0x00001800 /* SDRAM tRP = 3 cycles */
1370 #define TRP_4 0x00002000 /* SDRAM tRP = 4 cycles */
1371 #define TRP_5 0x00002800 /* SDRAM tRP = 5 cycles */
1372 #define TRP_6 0x00003000 /* SDRAM tRP = 6 cycles */
1373 #define TRP_7 0x00003800 /* SDRAM tRP = 7 cycles */
1374 #define TRCD_1 0x00008000 /* SDRAM tRCD = 1 cycle */
1375 #define TRCD_2 0x00010000 /* SDRAM tRCD = 2 cycles */
1376 #define TRCD_3 0x00018000 /* SDRAM tRCD = 3 cycles */
1377 #define TRCD_4 0x00020000 /* SDRAM tRCD = 4 cycles */
1378 #define TRCD_5 0x00028000 /* SDRAM tRCD = 5 cycles */
1379 #define TRCD_6 0x00030000 /* SDRAM tRCD = 6 cycles */
1380 #define TRCD_7 0x00038000 /* SDRAM tRCD = 7 cycles */
1381 #define TWR_1 0x00080000 /* SDRAM tWR = 1 cycle */
1382 #define TWR_2 0x00100000 /* SDRAM tWR = 2 cycles */
1383 #define TWR_3 0x00180000 /* SDRAM tWR = 3 cycles */
1384 #define PUPSD 0x00200000 /* Power-Up Start Delay (15 SCLK Cycles Delay) */
1385 #define PSM 0x00400000 /* Power-Up Sequence (Mode Register Before/After* Refresh) */
1386 #define PSS 0x00800000 /* Enable Power-Up Sequence on Next SDRAM Access */
1387 #define SRFS 0x01000000 /* Enable SDRAM Self-Refresh Mode */
1388 #define EBUFE 0x02000000 /* Enable External Buffering Timing */
1389 #define FBBRW 0x04000000 /* Enable Fast Back-To-Back Read To Write */
1390 #define EMREN 0x10000000 /* Extended Mode Register Enable */
1391 #define TCSR 0x20000000 /* Temp-Compensated Self-Refresh Value (85/45* Deg C) */
1392 #define CDDBG 0x40000000 /* Tristate SDRAM Controls During Bus Grant */
1394 /* EBIU_SDBCTL Masks */
1395 #define EBE 0x0001 /* Enable SDRAM External Bank */
1396 #define EBSZ_16 0x0000 /* SDRAM External Bank Size = 16MB */
1397 #define EBSZ_32 0x0002 /* SDRAM External Bank Size = 32MB */
1398 #define EBSZ_64 0x0004 /* SDRAM External Bank Size = 64MB */
1399 #define EBSZ_128 0x0006 /* SDRAM External Bank Size = 128MB */
1400 #define EBSZ_256 0x0008 /* SDRAM External Bank Size = 256MB */
1401 #define EBSZ_512 0x000A /* SDRAM External Bank Size = 512MB */
1402 #define EBCAW_8 0x0000 /* SDRAM External Bank Column Address Width = 8 Bits */
1403 #define EBCAW_9 0x0010 /* SDRAM External Bank Column Address Width = 9 Bits */
1404 #define EBCAW_10 0x0020 /* SDRAM External Bank Column Address Width = 10 Bits */
1405 #define EBCAW_11 0x0030 /* SDRAM External Bank Column Address Width = 11 Bits */
1407 /* EBIU_SDSTAT Masks */
1408 #define SDCI 0x0001 /* SDRAM Controller Idle */
1409 #define SDSRA 0x0002 /* SDRAM Self-Refresh Active */
1410 #define SDPUA 0x0004 /* SDRAM Power-Up Active */
1411 #define SDRS 0x0008 /* SDRAM Will Power-Up On Next Access */
1412 #define SDEASE 0x0010 /* SDRAM EAB Sticky Error Status */
1413 #define BGSTAT 0x0020 /* Bus Grant Status */
1416 /* ************************** DMA CONTROLLER MASKS ********************************/
1417 /* DMAx_CONFIG, MDMA_yy_CONFIG Masks */
1418 #define DMAEN 0x0001 /* DMA Channel Enable */
1419 #define WNR 0x0002 /* Channel Direction (W/R*) */
1420 #define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */
1421 #define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */
1422 #define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */
1423 #define DMA2D 0x0010 /* DMA Mode (2D/1D*) */
1424 #define RESTART 0x0020 /* DMA Buffer Clear */
1425 #define DI_SEL 0x0040 /* Data Interrupt Timing Select */
1426 #define DI_EN 0x0080 /* Data Interrupt Enable */
1427 #define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */
1428 #define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */
1429 #define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */
1430 #define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */
1431 #define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */
1432 #define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */
1433 #define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */
1434 #define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */
1435 #define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */
1436 #define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */
1437 #define NDSIZE 0x0900 /* Next Descriptor Size */
1438 #define DMAFLOW 0x7000 /* Flow Control */
1439 #define DMAFLOW_STOP 0x0000 /* Stop Mode */
1440 #define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */
1441 #define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */
1442 #define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */
1443 #define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */
1445 /* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */
1446 #define CTYPE 0x0040 /* DMA Channel Type Indicator (Memory/Peripheral*) */
1447 #define PMAP 0xF000 /* Peripheral Mapped To This Channel */
1448 #define PMAP_PPI 0x0000 /* PPI Port DMA */
1449 #define PMAP_EMACRX 0x1000 /* Ethernet Receive DMA */
1450 #define PMAP_EMACTX 0x2000 /* Ethernet Transmit DMA */
1451 #define PMAP_SPORT0RX 0x3000 /* SPORT0 Receive DMA */
1452 #define PMAP_SPORT0TX 0x4000 /* SPORT0 Transmit DMA */
1453 #define PMAP_SPORT1RX 0x5000 /* SPORT1 Receive DMA */
1454 #define PMAP_SPORT1TX 0x6000 /* SPORT1 Transmit DMA */
1455 #define PMAP_SPI 0x7000 /* SPI Port DMA */
1456 #define PMAP_UART0RX 0x8000 /* UART0 Port Receive DMA */
1457 #define PMAP_UART0TX 0x9000 /* UART0 Port Transmit DMA */
1458 #define PMAP_UART1RX 0xA000 /* UART1 Port Receive DMA */
1459 #define PMAP_UART1TX 0xB000 /* UART1 Port Transmit DMA */
1461 /* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */
1462 #define DMA_DONE 0x0001 /* DMA Completion Interrupt Status */
1463 #define DMA_ERR 0x0002 /* DMA Error Interrupt Status */
1464 #define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */
1465 #define DMA_RUN 0x0008 /* DMA Channel Running Indicator */
1468 /* ************ PARALLEL PERIPHERAL INTERFACE (PPI) MASKS *************/
1469 /* PPI_CONTROL Masks */
1470 #define PORT_EN 0x0001 /* PPI Port Enable */
1471 #define PORT_DIR 0x0002 /* PPI Port Direction */
1472 #define XFR_TYPE 0x000C /* PPI Transfer Type */
1473 #define PORT_CFG 0x0030 /* PPI Port Configuration */
1474 #define FLD_SEL 0x0040 /* PPI Active Field Select */
1475 #define PACK_EN 0x0080 /* PPI Packing Mode */
1476 #define DMA32 0x0100 /* PPI 32-bit DMA Enable */
1477 #define SKIP_EN 0x0200 /* PPI Skip Element Enable */
1478 #define SKIP_EO 0x0400 /* PPI Skip Even/Odd Elements */
1479 #define DLEN_8 0x0000 /* Data Length = 8 Bits */
1480 #define DLEN_10 0x0800 /* Data Length = 10 Bits */
1481 #define DLEN_11 0x1000 /* Data Length = 11 Bits */
1482 #define DLEN_12 0x1800 /* Data Length = 12 Bits */
1483 #define DLEN_13 0x2000 /* Data Length = 13 Bits */
1484 #define DLEN_14 0x2800 /* Data Length = 14 Bits */
1485 #define DLEN_15 0x3000 /* Data Length = 15 Bits */
1486 #define DLEN_16 0x3800 /* Data Length = 16 Bits */
1487 #define DLENGTH 0x3800 /* PPI Data Length */
1488 #define POLC 0x4000 /* PPI Clock Polarity */
1489 #define POLS 0x8000 /* PPI Frame Sync Polarity */
1491 /* PPI_STATUS Masks */
1492 #define FLD 0x0400 /* Field Indicator */
1493 #define FT_ERR 0x0800 /* Frame Track Error */
1494 #define OVR 0x1000 /* FIFO Overflow Error */
1495 #define UNDR 0x2000 /* FIFO Underrun Error */
1496 #define ERR_DET 0x4000 /* Error Detected Indicator */
1497 #define ERR_NCOR 0x8000 /* Error Not Corrected Indicator */
1500 /* ******************** TWO-WIRE INTERFACE (TWI) MASKS ***********************/
1501 /* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y); ) */
1502 #define CLKLOW(x) ((x) & 0xFF) /* Periods Clock Is Held Low */
1503 #define CLKHI(y) (((y)&0xFF)<<0x8) /* Periods Before New Clock Low */
1505 /* TWI_PRESCALE Masks */
1506 #define PRESCALE 0x007F /* SCLKs Per Internal Time Reference (10MHz) */
1507 #define TWI_ENA 0x0080 /* TWI Enable */
1508 #define SCCB 0x0200 /* SCCB Compatibility Enable */
1510 /* TWI_SLAVE_CTRL Masks */
1511 #define SEN 0x0001 /* Slave Enable */
1512 #define SADD_LEN 0x0002 /* Slave Address Length */
1513 #define STDVAL 0x0004 /* Slave Transmit Data Valid */
1514 #define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */
1515 #define GEN 0x0010 /* General Call Adrress Matching Enabled */
1517 /* TWI_SLAVE_STAT Masks */
1518 #define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */
1519 #define GCALL 0x0002 /* General Call Indicator */
1521 /* TWI_MASTER_CTRL Masks */
1522 #define MEN 0x0001 /* Master Mode Enable */
1523 #define MADD_LEN 0x0002 /* Master Address Length */
1524 #define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */
1525 #define FAST 0x0008 /* Use Fast Mode Timing Specs */
1526 #define STOP 0x0010 /* Issue Stop Condition */
1527 #define RSTART 0x0020 /* Repeat Start or Stop* At End Of Transfer */
1528 #define DCNT 0x3FC0 /* Data Bytes To Transfer */
1529 #define SDAOVR 0x4000 /* Serial Data Override */
1530 #define SCLOVR 0x8000 /* Serial Clock Override */
1532 /* TWI_MASTER_STAT Masks */
1533 #define MPROG 0x0001 /* Master Transfer In Progress */
1534 #define LOSTARB 0x0002 /* Lost Arbitration Indicator (Xfer Aborted) */
1535 #define ANAK 0x0004 /* Address Not Acknowledged */
1536 #define DNAK 0x0008 /* Data Not Acknowledged */
1537 #define BUFRDERR 0x0010 /* Buffer Read Error */
1538 #define BUFWRERR 0x0020 /* Buffer Write Error */
1539 #define SDASEN 0x0040 /* Serial Data Sense */
1540 #define SCLSEN 0x0080 /* Serial Clock Sense */
1541 #define BUSBUSY 0x0100 /* Bus Busy Indicator */
1543 /* TWI_INT_SRC and TWI_INT_ENABLE Masks */
1544 #define SINIT 0x0001 /* Slave Transfer Initiated */
1545 #define SCOMP 0x0002 /* Slave Transfer Complete */
1546 #define SERR 0x0004 /* Slave Transfer Error */
1547 #define SOVF 0x0008 /* Slave Overflow */
1548 #define MCOMP 0x0010 /* Master Transfer Complete */
1549 #define MERR 0x0020 /* Master Transfer Error */
1550 #define XMTSERV 0x0040 /* Transmit FIFO Service */
1551 #define RCVSERV 0x0080 /* Receive FIFO Service */
1553 /* TWI_FIFO_CTRL Masks */
1554 #define XMTFLUSH 0x0001 /* Transmit Buffer Flush */
1555 #define RCVFLUSH 0x0002 /* Receive Buffer Flush */
1556 #define XMTINTLEN 0x0004 /* Transmit Buffer Interrupt Length */
1557 #define RCVINTLEN 0x0008 /* Receive Buffer Interrupt Length */
1559 /* TWI_FIFO_STAT Masks */
1560 #define XMTSTAT 0x0003 /* Transmit FIFO Status */
1561 #define XMT_EMPTY 0x0000 /* Transmit FIFO Empty */
1562 #define XMT_HALF 0x0001 /* Transmit FIFO Has 1 Byte To Write */
1563 #define XMT_FULL 0x0003 /* Transmit FIFO Full (2 Bytes To Write) */
1565 #define RCVSTAT 0x000C /* Receive FIFO Status */
1566 #define RCV_EMPTY 0x0000 /* Receive FIFO Empty */
1567 #define RCV_HALF 0x0004 /* Receive FIFO Has 1 Byte To Read */
1568 #define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */
1571 /* Omit CAN masks from defBF534.h */
1573 /* ******************* PIN CONTROL REGISTER MASKS ************************/
1574 /* PORT_MUX Masks */
1575 #define PJSE 0x0001 /* Port J SPI/SPORT Enable */
1576 #define PJSE_SPORT 0x0000 /* Enable TFS0/DT0PRI */
1577 #define PJSE_SPI 0x0001 /* Enable SPI_SSEL3:2 */
1579 #define PJCE(x) (((x)&0x3)<<1) /* Port J CAN/SPI/SPORT Enable */
1580 #define PJCE_SPORT 0x0000 /* Enable DR0SEC/DT0SEC */
1581 #define PJCE_CAN 0x0002 /* Enable CAN RX/TX */
1582 #define PJCE_SPI 0x0004 /* Enable SPI_SSEL7 */
1584 #define PFDE 0x0008 /* Port F DMA Request Enable */
1585 #define PFDE_UART 0x0000 /* Enable UART0 RX/TX */
1586 #define PFDE_DMA 0x0008 /* Enable DMAR1:0 */
1588 #define PFTE 0x0010 /* Port F Timer Enable */
1589 #define PFTE_UART 0x0000 /* Enable UART1 RX/TX */
1590 #define PFTE_TIMER 0x0010 /* Enable TMR7:6 */
1592 #define PFS6E 0x0020 /* Port F SPI SSEL 6 Enable */
1593 #define PFS6E_TIMER 0x0000 /* Enable TMR5 */
1594 #define PFS6E_SPI 0x0020 /* Enable SPI_SSEL6 */
1596 #define PFS5E 0x0040 /* Port F SPI SSEL 5 Enable */
1597 #define PFS5E_TIMER 0x0000 /* Enable TMR4 */
1598 #define PFS5E_SPI 0x0040 /* Enable SPI_SSEL5 */
1600 #define PFS4E 0x0080 /* Port F SPI SSEL 4 Enable */
1601 #define PFS4E_TIMER 0x0000 /* Enable TMR3 */
1602 #define PFS4E_SPI 0x0080 /* Enable SPI_SSEL4 */
1604 #define PFFE 0x0100 /* Port F PPI Frame Sync Enable */
1605 #define PFFE_TIMER 0x0000 /* Enable TMR2 */
1606 #define PFFE_PPI 0x0100 /* Enable PPI FS3 */
1608 #define PGSE 0x0200 /* Port G SPORT1 Secondary Enable */
1609 #define PGSE_PPI 0x0000 /* Enable PPI D9:8 */
1610 #define PGSE_SPORT 0x0200 /* Enable DR1SEC/DT1SEC */
1612 #define PGRE 0x0400 /* Port G SPORT1 Receive Enable */
1613 #define PGRE_PPI 0x0000 /* Enable PPI D12:10 */
1614 #define PGRE_SPORT 0x0400 /* Enable DR1PRI/RFS1/RSCLK1 */
1616 #define PGTE 0x0800 /* Port G SPORT1 Transmit Enable */
1617 #define PGTE_PPI 0x0000 /* Enable PPI D15:13 */
1618 #define PGTE_SPORT 0x0800 /* Enable DT1PRI/TFS1/TSCLK1 */
1621 /* ****************** HANDSHAKE DMA (HDMA) MASKS *********************/
1622 /* HDMAx_CTL Masks */
1623 #define HMDMAEN 0x0001 /* Enable Handshake DMA 0/1 */
1624 #define REP 0x0002 /* HDMA Request Polarity */
1625 #define UTE 0x0004 /* Urgency Threshold Enable */
1626 #define OIE 0x0010 /* Overflow Interrupt Enable */
1627 #define BDIE 0x0020 /* Block Done Interrupt Enable */
1628 #define MBDI 0x0040 /* Mask Block Done IRQ If Pending ECNT */
1629 #define DRQ 0x0300 /* HDMA Request Type */
1630 #define DRQ_NONE 0x0000 /* No Request */
1631 #define DRQ_SINGLE 0x0100 /* Channels Request Single */
1632 #define DRQ_MULTI 0x0200 /* Channels Request Multi (Default) */
1633 #define DRQ_URGENT 0x0300 /* Channels Request Multi Urgent */
1634 #define RBC 0x1000 /* Reload BCNT With IBCNT */
1635 #define PS 0x2000 /* HDMA Pin Status */
1636 #define OI 0x4000 /* Overflow Interrupt Generated */
1637 #define BDI 0x8000 /* Block Done Interrupt Generated */
1639 /* entry addresses of the user-callable Boot ROM functions */
1641 #define _BOOTROM_RESET 0xEF000000
1642 #define _BOOTROM_FINAL_INIT 0xEF000002
1643 #define _BOOTROM_DO_MEMORY_DMA 0xEF000006
1644 #define _BOOTROM_BOOT_DXE_FLASH 0xEF000008
1645 #define _BOOTROM_BOOT_DXE_SPI 0xEF00000A
1646 #define _BOOTROM_BOOT_DXE_TWI 0xEF00000C
1647 #define _BOOTROM_GET_DXE_ADDRESS_FLASH 0xEF000010
1648 #define _BOOTROM_GET_DXE_ADDRESS_SPI 0xEF000012
1649 #define _BOOTROM_GET_DXE_ADDRESS_TWI 0xEF000014
1651 /* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
1652 #define PGDE_UART PFDE_UART
1653 #define PGDE_DMA PFDE_DMA
1654 #define CKELOW SCKELOW
1656 /* ==== end from defBF534.h ==== */
1658 /* HOST Port Registers */
1660 #define HOST_CONTROL 0xffc03400 /* HOST Control Register */
1661 #define HOST_STATUS 0xffc03404 /* HOST Status Register */
1662 #define HOST_TIMEOUT 0xffc03408 /* HOST Acknowledge Mode Timeout Register */
1664 /* Counter Registers */
1666 #define CNT_CONFIG 0xffc03500 /* Configuration Register */
1667 #define CNT_IMASK 0xffc03504 /* Interrupt Mask Register */
1668 #define CNT_STATUS 0xffc03508 /* Status Register */
1669 #define CNT_COMMAND 0xffc0350c /* Command Register */
1670 #define CNT_DEBOUNCE 0xffc03510 /* Debounce Register */
1671 #define CNT_COUNTER 0xffc03514 /* Counter Register */
1672 #define CNT_MAX 0xffc03518 /* Maximal Count Register */
1673 #define CNT_MIN 0xffc0351c /* Minimal Count Register */
1675 /* OTP/FUSE Registers */
1677 #define OTP_CONTROL 0xffc03600 /* OTP/Fuse Control Register */
1678 #define OTP_BEN 0xffc03604 /* OTP/Fuse Byte Enable */
1679 #define OTP_STATUS 0xffc03608 /* OTP/Fuse Status */
1680 #define OTP_TIMING 0xffc0360c /* OTP/Fuse Access Timing */
1682 /* Security Registers */
1684 #define SECURE_SYSSWT 0xffc03620 /* Secure System Switches */
1685 #define SECURE_CONTROL 0xffc03624 /* Secure Control */
1686 #define SECURE_STATUS 0xffc03628 /* Secure Status */
1688 /* OTP Read/Write Data Buffer Registers */
1690 #define OTP_DATA0 0xffc03680 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
1691 #define OTP_DATA1 0xffc03684 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
1692 #define OTP_DATA2 0xffc03688 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
1693 #define OTP_DATA3 0xffc0368c /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
1697 #define NFC_CTL 0xffc03700 /* NAND Control Register */
1698 #define NFC_STAT 0xffc03704 /* NAND Status Register */
1699 #define NFC_IRQSTAT 0xffc03708 /* NAND Interrupt Status Register */
1700 #define NFC_IRQMASK 0xffc0370c /* NAND Interrupt Mask Register */
1701 #define NFC_ECC0 0xffc03710 /* NAND ECC Register 0 */
1702 #define NFC_ECC1 0xffc03714 /* NAND ECC Register 1 */
1703 #define NFC_ECC2 0xffc03718 /* NAND ECC Register 2 */
1704 #define NFC_ECC3 0xffc0371c /* NAND ECC Register 3 */
1705 #define NFC_COUNT 0xffc03720 /* NAND ECC Count Register */
1706 #define NFC_RST 0xffc03724 /* NAND ECC Reset Register */
1707 #define NFC_PGCTL 0xffc03728 /* NAND Page Control Register */
1708 #define NFC_READ 0xffc0372c /* NAND Read Data Register */
1709 #define NFC_ADDR 0xffc03740 /* NAND Address Register */
1710 #define NFC_CMD 0xffc03744 /* NAND Command Register */
1711 #define NFC_DATA_WR 0xffc03748 /* NAND Data Write Register */
1712 #define NFC_DATA_RD 0xffc0374c /* NAND Data Read Register */
1714 /* ********************************************************** */
1715 /* SINGLE BIT MACRO PAIRS (bit mask and negated one) */
1716 /* and MULTI BIT READ MACROS */
1717 /* ********************************************************** */
1719 /* Bit masks for HOST_CONTROL */
1721 #define HOST_CNTR_HOST_EN 0x1 /* Host Enable */
1722 #define HOST_CNTR_nHOST_EN 0x0
1723 #define HOST_CNTR_HOST_END 0x2 /* Host Endianess */
1724 #define HOST_CNTR_nHOST_END 0x0
1725 #define HOST_CNTR_DATA_SIZE 0x4 /* Data Size */
1726 #define HOST_CNTR_nDATA_SIZE 0x0
1727 #define HOST_CNTR_HOST_RST 0x8 /* Host Reset */
1728 #define HOST_CNTR_nHOST_RST 0x0
1729 #define HOST_CNTR_HRDY_OVR 0x20 /* Host Ready Override */
1730 #define HOST_CNTR_nHRDY_OVR 0x0
1731 #define HOST_CNTR_INT_MODE 0x40 /* Interrupt Mode */
1732 #define HOST_CNTR_nINT_MODE 0x0
1733 #define HOST_CNTR_BT_EN 0x80 /* Bus Timeout Enable */
1734 #define HOST_CNTR_ nBT_EN 0x0
1735 #define HOST_CNTR_EHW 0x100 /* Enable Host Write */
1736 #define HOST_CNTR_nEHW 0x0
1737 #define HOST_CNTR_EHR 0x200 /* Enable Host Read */
1738 #define HOST_CNTR_nEHR 0x0
1739 #define HOST_CNTR_BDR 0x400 /* Burst DMA Requests */
1740 #define HOST_CNTR_nBDR 0x0
1742 /* Bit masks for HOST_STATUS */
1744 #define HOST_STAT_READY 0x1 /* DMA Ready */
1745 #define HOST_STAT_nREADY 0x0
1746 #define HOST_STAT_FIFOFULL 0x2 /* FIFO Full */
1747 #define HOST_STAT_nFIFOFULL 0x0
1748 #define HOST_STAT_FIFOEMPTY 0x4 /* FIFO Empty */
1749 #define HOST_STAT_nFIFOEMPTY 0x0
1750 #define HOST_STAT_COMPLETE 0x8 /* DMA Complete */
1751 #define HOST_STAT_nCOMPLETE 0x0
1752 #define HOST_STAT_HSHK 0x10 /* Host Handshake */
1753 #define HOST_STAT_nHSHK 0x0
1754 #define HOST_STAT_TIMEOUT 0x20 /* Host Timeout */
1755 #define HOST_STAT_nTIMEOUT 0x0
1756 #define HOST_STAT_HIRQ 0x40 /* Host Interrupt Request */
1757 #define HOST_STAT_nHIRQ 0x0
1758 #define HOST_STAT_ALLOW_CNFG 0x80 /* Allow New Configuration */
1759 #define HOST_STAT_nALLOW_CNFG 0x0
1760 #define HOST_STAT_DMA_DIR 0x100 /* DMA Direction */
1761 #define HOST_STAT_nDMA_DIR 0x0
1762 #define HOST_STAT_BTE 0x200 /* Bus Timeout Enabled */
1763 #define HOST_STAT_nBTE 0x0
1764 #define HOST_STAT_HOSTRD_DONE 0x8000 /* Host Read Completion Interrupt */
1765 #define HOST_STAT_nHOSTRD_DONE 0x0
1767 /* Bit masks for HOST_TIMEOUT */
1769 #define HOST_COUNT_TIMEOUT 0x7ff /* Host Timeout count */
1771 /* Bit masks for CNT_CONFIG */
1773 #define CNTE 0x1 /* Counter Enable */
1775 #define DEBE 0x2 /* Debounce Enable */
1777 #define CDGINV 0x10 /* CDG Pin Polarity Invert */
1779 #define CUDINV 0x20 /* CUD Pin Polarity Invert */
1781 #define CZMINV 0x40 /* CZM Pin Polarity Invert */
1783 #define CNTMODE 0x700 /* Counter Operating Mode */
1784 #define ZMZC 0x800 /* CZM Zeroes Counter Enable */
1786 #define BNDMODE 0x3000 /* Boundary register Mode */
1787 #define INPDIS 0x8000 /* CUG and CDG Input Disable */
1790 /* Bit masks for CNT_IMASK */
1792 #define ICIE 0x1 /* Illegal Gray/Binary Code Interrupt Enable */
1794 #define UCIE 0x2 /* Up count Interrupt Enable */
1796 #define DCIE 0x4 /* Down count Interrupt Enable */
1798 #define MINCIE 0x8 /* Min Count Interrupt Enable */
1800 #define MAXCIE 0x10 /* Max Count Interrupt Enable */
1802 #define COV31IE 0x20 /* Bit 31 Overflow Interrupt Enable */
1803 #define nCOV31IE 0x0
1804 #define COV15IE 0x40 /* Bit 15 Overflow Interrupt Enable */
1805 #define nCOV15IE 0x0
1806 #define CZEROIE 0x80 /* Count to Zero Interrupt Enable */
1807 #define nCZEROIE 0x0
1808 #define CZMIE 0x100 /* CZM Pin Interrupt Enable */
1810 #define CZMEIE 0x200 /* CZM Error Interrupt Enable */
1812 #define CZMZIE 0x400 /* CZM Zeroes Counter Interrupt Enable */
1815 /* Bit masks for CNT_STATUS */
1817 #define ICII 0x1 /* Illegal Gray/Binary Code Interrupt Identifier */
1819 #define UCII 0x2 /* Up count Interrupt Identifier */
1821 #define DCII 0x4 /* Down count Interrupt Identifier */
1823 #define MINCII 0x8 /* Min Count Interrupt Identifier */
1825 #define MAXCII 0x10 /* Max Count Interrupt Identifier */
1827 #define COV31II 0x20 /* Bit 31 Overflow Interrupt Identifier */
1828 #define nCOV31II 0x0
1829 #define COV15II 0x40 /* Bit 15 Overflow Interrupt Identifier */
1830 #define nCOV15II 0x0
1831 #define CZEROII 0x80 /* Count to Zero Interrupt Identifier */
1832 #define nCZEROII 0x0
1833 #define CZMII 0x100 /* CZM Pin Interrupt Identifier */
1835 #define CZMEII 0x200 /* CZM Error Interrupt Identifier */
1837 #define CZMZII 0x400 /* CZM Zeroes Counter Interrupt Identifier */
1840 /* Bit masks for CNT_COMMAND */
1842 #define W1LCNT 0xf /* Load Counter Register */
1843 #define W1LMIN 0xf0 /* Load Min Register */
1844 #define W1LMAX 0xf00 /* Load Max Register */
1845 #define W1ZMONCE 0x1000 /* Enable CZM Clear Counter Once */
1846 #define nW1ZMONCE 0x0
1848 /* Bit masks for CNT_DEBOUNCE */
1850 #define DPRESCALE 0xf /* Load Counter Register */
1852 /* Bit masks for OTP_CONTROL */
1854 #define FUSE_FADDR 0x1ff /* OTP/Fuse Address */
1855 #define FIEN 0x800 /* OTP/Fuse Interrupt Enable */
1857 #define FTESTDEC 0x1000 /* OTP/Fuse Test Decoder */
1858 #define nFTESTDEC 0x0
1859 #define FWRTEST 0x2000 /* OTP/Fuse Write Test */
1860 #define nFWRTEST 0x0
1861 #define FRDEN 0x4000 /* OTP/Fuse Read Enable */
1863 #define FWREN 0x8000 /* OTP/Fuse Write Enable */
1866 /* Bit masks for OTP_BEN */
1868 #define FBEN 0xffff /* OTP/Fuse Byte Enable */
1870 /* Bit masks for OTP_STATUS */
1872 #define FCOMP 0x1 /* OTP/Fuse Access Complete */
1874 #define FERROR 0x2 /* OTP/Fuse Access Error */
1876 #define MMRGLOAD 0x10 /* Memory Mapped Register Gasket Load */
1877 #define nMMRGLOAD 0x0
1878 #define MMRGLOCK 0x20 /* Memory Mapped Register Gasket Lock */
1879 #define nMMRGLOCK 0x0
1880 #define FPGMEN 0x40 /* OTP/Fuse Program Enable */
1883 /* Bit masks for OTP_TIMING */
1885 #define USECDIV 0xff /* Micro Second Divider */
1886 #define READACC 0x7f00 /* Read Access Time */
1887 #define CPUMPRL 0x38000 /* Charge Pump Release Time */
1888 #define CPUMPSU 0xc0000 /* Charge Pump Setup Time */
1889 #define CPUMPHD 0xf00000 /* Charge Pump Hold Time */
1890 #define PGMTIME 0xff000000 /* Program Time */
1892 /* Bit masks for SECURE_SYSSWT */
1894 #define EMUDABL 0x1 /* Emulation Disable. */
1895 #define nEMUDABL 0x0
1896 #define RSTDABL 0x2 /* Reset Disable */
1897 #define nRSTDABL 0x0
1898 #define L1IDABL 0x1c /* L1 Instruction Memory Disable. */
1899 #define L1DADABL 0xe0 /* L1 Data Bank A Memory Disable. */
1900 #define L1DBDABL 0x700 /* L1 Data Bank B Memory Disable. */
1901 #define DMA0OVR 0x800 /* DMA0 Memory Access Override */
1902 #define nDMA0OVR 0x0
1903 #define DMA1OVR 0x1000 /* DMA1 Memory Access Override */
1904 #define nDMA1OVR 0x0
1905 #define EMUOVR 0x4000 /* Emulation Override */
1907 #define OTPSEN 0x8000 /* OTP Secrets Enable. */
1909 #define L2DABL 0x70000 /* L2 Memory Disable. */
1911 /* Bit masks for SECURE_CONTROL */
1913 #define SECURE0 0x1 /* SECURE 0 */
1914 #define nSECURE0 0x0
1915 #define SECURE1 0x2 /* SECURE 1 */
1916 #define nSECURE1 0x0
1917 #define SECURE2 0x4 /* SECURE 2 */
1918 #define nSECURE2 0x0
1919 #define SECURE3 0x8 /* SECURE 3 */
1920 #define nSECURE3 0x0
1922 /* Bit masks for SECURE_STATUS */
1924 #define SECMODE 0x3 /* Secured Mode Control State */
1925 #define NMI 0x4 /* Non Maskable Interrupt */
1927 #define AFVALID 0x8 /* Authentication Firmware Valid */
1928 #define nAFVALID 0x0
1929 #define AFEXIT 0x10 /* Authentication Firmware Exit */
1931 #define SECSTAT 0xe0 /* Secure Status */
1933 /* Bit masks for NFC_CTL */
1935 #define WR_DLY 0xf /* Write Strobe Delay */
1936 #define RD_DLY 0xf0 /* Read Strobe Delay */
1937 #define NWIDTH 0x100 /* NAND Data Width */
1939 #define PG_SIZE 0x200 /* Page Size */
1940 #define nPG_SIZE 0x0
1942 /* Bit masks for NFC_STAT */
1944 #define NBUSY 0x1 /* Not Busy */
1946 #define WB_FULL 0x2 /* Write Buffer Full */
1947 #define nWB_FULL 0x0
1948 #define PG_WR_STAT 0x4 /* Page Write Pending */
1949 #define nPG_WR_STAT 0x0
1950 #define PG_RD_STAT 0x8 /* Page Read Pending */
1951 #define nPG_RD_STAT 0x0
1952 #define WB_EMPTY 0x10 /* Write Buffer Empty */
1953 #define nWB_EMPTY 0x0
1955 /* Bit masks for NFC_IRQSTAT */
1957 #define NBUSYIRQ 0x1 /* Not Busy IRQ */
1958 #define nNBUSYIRQ 0x0
1959 #define WB_OVF 0x2 /* Write Buffer Overflow */
1961 #define WB_EDGE 0x4 /* Write Buffer Edge Detect */
1962 #define nWB_EDGE 0x0
1963 #define RD_RDY 0x8 /* Read Data Ready */
1965 #define WR_DONE 0x10 /* Page Write Done */
1966 #define nWR_DONE 0x0
1968 /* Bit masks for NFC_IRQMASK */
1970 #define MASK_BUSYIRQ 0x1 /* Mask Not Busy IRQ */
1971 #define nMASK_BUSYIRQ 0x0
1972 #define MASK_WBOVF 0x2 /* Mask Write Buffer Overflow */
1973 #define nMASK_WBOVF 0x0
1974 #define MASK_WBEMPTY 0x4 /* Mask Write Buffer Empty */
1975 #define nMASK_WBEMPTY 0x0
1976 #define MASK_RDRDY 0x8 /* Mask Read Data Ready */
1977 #define nMASK_RDRDY 0x0
1978 #define MASK_WRDONE 0x10 /* Mask Write Done */
1979 #define nMASK_WRDONE 0x0
1981 /* Bit masks for NFC_RST */
1983 #define ECC_RST 0x1 /* ECC (and NFC counters) Reset */
1984 #define nECC_RST 0x0
1986 /* Bit masks for NFC_PGCTL */
1988 #define PG_RD_START 0x1 /* Page Read Start */
1989 #define nPG_RD_START 0x0
1990 #define PG_WR_START 0x2 /* Page Write Start */
1991 #define nPG_WR_START 0x0
1993 /* Bit masks for NFC_ECC0 */
1995 #define ECC0 0x7ff /* Parity Calculation Result0 */
1997 /* Bit masks for NFC_ECC1 */
1999 #define ECC1 0x7ff /* Parity Calculation Result1 */
2001 /* Bit masks for NFC_ECC2 */
2003 #define ECC2 0x7ff /* Parity Calculation Result2 */
2005 /* Bit masks for NFC_ECC3 */
2007 #define ECC3 0x7ff /* Parity Calculation Result3 */
2009 /* Bit masks for NFC_COUNT */
2011 #define ECCCNT 0x3ff /* Transfer Count */
2014 #endif /* _DEF_BF52X_H */
projects / linux-2.6 / blob