git.oblomov.eu Git - linux-2.6/blob - arch/arm/mach-versatile/core.c

   1 /*
   2  *  linux/arch/arm/mach-versatile/core.c
   3  *
   4  *  Copyright (C) 1999 - 2003 ARM Limited
   5  *  Copyright (C) 2000 Deep Blue Solutions Ltd
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License as published by
   9  * the Free Software Foundation; either version 2 of the License, or
  10  * (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  20  */
  21 #include <linux/config.h>
  22 #include <linux/init.h>
  23 #include <linux/device.h>
  24 #include <linux/dma-mapping.h>
  25 #include <linux/sysdev.h>
  26 #include <linux/interrupt.h>
  27
  28 #include <asm/system.h>
  29 #include <asm/hardware.h>
  30 #include <asm/io.h>
  31 #include <asm/irq.h>
  32 #include <asm/leds.h>
  33 #include <asm/mach-types.h>
  34 #include <asm/hardware/amba.h>
  35 #include <asm/hardware/amba_clcd.h>
  36 #include <asm/hardware/icst307.h>
  37
  38 #include <asm/mach/arch.h>
  39 #include <asm/mach/flash.h>
  40 #include <asm/mach/irq.h>
  41 #include <asm/mach/time.h>
  42 #include <asm/mach/map.h>
  43 #include <asm/mach/mmc.h>
  44
  45 #include "core.h"
  46 #include "clock.h"
  47
  48 /*
  49  * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx
  50  * is the (PA >> 12).
  51  *
  52  * Setup a VA for the Versatile Vectored Interrupt Controller.
  53  */
  54 #define VA_VIC_BASE              IO_ADDRESS(VERSATILE_VIC_BASE)
  55 #define VA_SIC_BASE              IO_ADDRESS(VERSATILE_SIC_BASE)
  56
  57 static void vic_mask_irq(unsigned int irq)
  58 {
  59         irq -= IRQ_VIC_START;
  60         writel(1 << irq, VA_VIC_BASE + VIC_IRQ_ENABLE_CLEAR);
  61 }
  62
  63 static void vic_unmask_irq(unsigned int irq)
  64 {
  65         irq -= IRQ_VIC_START;
  66         writel(1 << irq, VA_VIC_BASE + VIC_IRQ_ENABLE);
  67 }
  68
  69 static struct irqchip vic_chip = {
  70         .ack    = vic_mask_irq,
  71         .mask   = vic_mask_irq,
  72         .unmask = vic_unmask_irq,
  73 };
  74
  75 static void sic_mask_irq(unsigned int irq)
  76 {
  77         irq -= IRQ_SIC_START;
  78         writel(1 << irq, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR);
  79 }
  80
  81 static void sic_unmask_irq(unsigned int irq)
  82 {
  83         irq -= IRQ_SIC_START;
  84         writel(1 << irq, VA_SIC_BASE + SIC_IRQ_ENABLE_SET);
  85 }
  86
  87 static struct irqchip sic_chip = {
  88         .ack    = sic_mask_irq,
  89         .mask   = sic_mask_irq,
  90         .unmask = sic_unmask_irq,
  91 };
  92
  93 static void
  94 sic_handle_irq(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
  95 {
  96         unsigned long status = readl(VA_SIC_BASE + SIC_IRQ_STATUS);
  97
  98         if (status == 0) {
  99                 do_bad_IRQ(irq, desc, regs);
 100                 return;
 101         }
 102
 103         do {
 104                 irq = ffs(status) - 1;
 105                 status &= ~(1 << irq);
 106
 107                 irq += IRQ_SIC_START;
 108
 109                 desc = irq_desc + irq;
 110                 desc->handle(irq, desc, regs);
 111         } while (status);
 112 }
 113
 114 #if 1
 115 #define IRQ_MMCI0A      IRQ_VICSOURCE22
 116 #define IRQ_AACI        IRQ_VICSOURCE24
 117 #define IRQ_ETH         IRQ_VICSOURCE25
 118 #define PIC_MASK        0xFFD00000
 119 #else
 120 #define IRQ_MMCI0A      IRQ_SIC_MMCI0A
 121 #define IRQ_AACI        IRQ_SIC_AACI
 122 #define IRQ_ETH         IRQ_SIC_ETH
 123 #define PIC_MASK        0
 124 #endif
 125
 126 void __init versatile_init_irq(void)
 127 {
 128         unsigned int i, value;
 129
 130         /* Disable all interrupts initially. */
 131
 132         writel(0, VA_VIC_BASE + VIC_INT_SELECT);
 133         writel(0, VA_VIC_BASE + VIC_IRQ_ENABLE);
 134         writel(~0, VA_VIC_BASE + VIC_IRQ_ENABLE_CLEAR);
 135         writel(0, VA_VIC_BASE + VIC_IRQ_STATUS);
 136         writel(0, VA_VIC_BASE + VIC_ITCR);
 137         writel(~0, VA_VIC_BASE + VIC_IRQ_SOFT_CLEAR);
 138
 139         /*
 140          * Make sure we clear all existing interrupts
 141          */
 142         writel(0, VA_VIC_BASE + VIC_VECT_ADDR);
 143         for (i = 0; i < 19; i++) {
 144                 value = readl(VA_VIC_BASE + VIC_VECT_ADDR);
 145                 writel(value, VA_VIC_BASE + VIC_VECT_ADDR);
 146         }
 147
 148         for (i = 0; i < 16; i++) {
 149                 value = readl(VA_VIC_BASE + VIC_VECT_CNTL0 + (i * 4));
 150                 writel(value | VICVectCntl_Enable | i, VA_VIC_BASE + VIC_VECT_CNTL0 + (i * 4));
 151         }
 152
 153         writel(32, VA_VIC_BASE + VIC_DEF_VECT_ADDR);
 154
 155         for (i = IRQ_VIC_START; i <= IRQ_VIC_END; i++) {
 156                 if (i != IRQ_VICSOURCE31) {
 157                         set_irq_chip(i, &vic_chip);
 158                         set_irq_handler(i, do_level_IRQ);
 159                         set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
 160                 }
 161         }
 162
 163         set_irq_handler(IRQ_VICSOURCE31, sic_handle_irq);
 164         vic_unmask_irq(IRQ_VICSOURCE31);
 165
 166         /* Do second interrupt controller */
 167         writel(~0, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR);
 168
 169         for (i = IRQ_SIC_START; i <= IRQ_SIC_END; i++) {
 170                 if ((PIC_MASK & (1 << (i - IRQ_SIC_START))) == 0) {
 171                         set_irq_chip(i, &sic_chip);
 172                         set_irq_handler(i, do_level_IRQ);
 173                         set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
 174                 }
 175         }
 176
 177         /*
 178          * Interrupts on secondary controller from 0 to 8 are routed to
 179          * source 31 on PIC.
 180          * Interrupts from 21 to 31 are routed directly to the VIC on
 181          * the corresponding number on primary controller. This is controlled
 182          * by setting PIC_ENABLEx.
 183          */
 184         writel(PIC_MASK, VA_SIC_BASE + SIC_INT_PIC_ENABLE);
 185 }
 186
 187 static struct map_desc versatile_io_desc[] __initdata = {
 188  { IO_ADDRESS(VERSATILE_SYS_BASE),   VERSATILE_SYS_BASE,   SZ_4K,      MT_DEVICE },
 189  { IO_ADDRESS(VERSATILE_SIC_BASE),   VERSATILE_SIC_BASE,   SZ_4K,      MT_DEVICE },
 190  { IO_ADDRESS(VERSATILE_VIC_BASE),   VERSATILE_VIC_BASE,   SZ_4K,      MT_DEVICE },
 191  { IO_ADDRESS(VERSATILE_SCTL_BASE),  VERSATILE_SCTL_BASE,  SZ_4K * 9,  MT_DEVICE },
 192 #ifdef CONFIG_MACH_VERSATILE_AB
 193  { IO_ADDRESS(VERSATILE_GPIO0_BASE), VERSATILE_GPIO0_BASE, SZ_4K,      MT_DEVICE },
 194  { IO_ADDRESS(VERSATILE_IB2_BASE),   VERSATILE_IB2_BASE,   SZ_64M,     MT_DEVICE },
 195 #endif
 196 #ifdef CONFIG_DEBUG_LL
 197  { IO_ADDRESS(VERSATILE_UART0_BASE), VERSATILE_UART0_BASE, SZ_4K,      MT_DEVICE },
 198 #endif
 199 #ifdef FIXME
 200  { PCI_MEMORY_VADDR,                 PHYS_PCI_MEM_BASE,    SZ_16M,     MT_DEVICE },
 201  { PCI_CONFIG_VADDR,                 PHYS_PCI_CONFIG_BASE, SZ_16M,     MT_DEVICE },
 202  { PCI_V3_VADDR,                     PHYS_PCI_V3_BASE,     SZ_512K,    MT_DEVICE },
 203  { PCI_IO_VADDR,                     PHYS_PCI_IO_BASE,     SZ_64K,     MT_DEVICE },
 204 #endif
 205 };
 206
 207 void __init versatile_map_io(void)
 208 {
 209         iotable_init(versatile_io_desc, ARRAY_SIZE(versatile_io_desc));
 210 }
 211
 212 #define VERSATILE_REFCOUNTER    (IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_24MHz_OFFSET)
 213
 214 /*
 215  * This is the Versatile sched_clock implementation.  This has
 216  * a resolution of 41.7ns, and a maximum value of about 179s.
 217  */
 218 unsigned long long sched_clock(void)
 219 {
 220         unsigned long long v;
 221
 222         v = (unsigned long long)readl(VERSATILE_REFCOUNTER) * 125;
 223         do_div(v, 3);
 224
 225         return v;
 226 }
 227
 228
 229 #define VERSATILE_FLASHCTRL    (IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_FLASH_OFFSET)
 230
 231 static int versatile_flash_init(void)
 232 {
 233         u32 val;
 234
 235         val = __raw_readl(VERSATILE_FLASHCTRL);
 236         val &= ~VERSATILE_FLASHPROG_FLVPPEN;
 237         __raw_writel(val, VERSATILE_FLASHCTRL);
 238
 239         return 0;
 240 }
 241
 242 static void versatile_flash_exit(void)
 243 {
 244         u32 val;
 245
 246         val = __raw_readl(VERSATILE_FLASHCTRL);
 247         val &= ~VERSATILE_FLASHPROG_FLVPPEN;
 248         __raw_writel(val, VERSATILE_FLASHCTRL);
 249 }
 250
 251 static void versatile_flash_set_vpp(int on)
 252 {
 253         u32 val;
 254
 255         val = __raw_readl(VERSATILE_FLASHCTRL);
 256         if (on)
 257                 val |= VERSATILE_FLASHPROG_FLVPPEN;
 258         else
 259                 val &= ~VERSATILE_FLASHPROG_FLVPPEN;
 260         __raw_writel(val, VERSATILE_FLASHCTRL);
 261 }
 262
 263 static struct flash_platform_data versatile_flash_data = {
 264         .map_name               = "cfi_probe",
 265         .width                  = 4,
 266         .init                   = versatile_flash_init,
 267         .exit                   = versatile_flash_exit,
 268         .set_vpp                = versatile_flash_set_vpp,
 269 };
 270
 271 static struct resource versatile_flash_resource = {
 272         .start                  = VERSATILE_FLASH_BASE,
 273         .end                    = VERSATILE_FLASH_BASE + VERSATILE_FLASH_SIZE,
 274         .flags                  = IORESOURCE_MEM,
 275 };
 276
 277 static struct platform_device versatile_flash_device = {
 278         .name                   = "armflash",
 279         .id                     = 0,
 280         .dev                    = {
 281                 .platform_data  = &versatile_flash_data,
 282         },
 283         .num_resources          = 1,
 284         .resource               = &versatile_flash_resource,
 285 };
 286
 287 static struct resource smc91x_resources[] = {
 288         [0] = {
 289                 .start          = VERSATILE_ETH_BASE,
 290                 .end            = VERSATILE_ETH_BASE + SZ_64K - 1,
 291                 .flags          = IORESOURCE_MEM,
 292         },
 293         [1] = {
 294                 .start          = IRQ_ETH,
 295                 .end            = IRQ_ETH,
 296                 .flags          = IORESOURCE_IRQ,
 297         },
 298 };
 299
 300 static struct platform_device smc91x_device = {
 301         .name           = "smc91x",
 302         .id             = 0,
 303         .num_resources  = ARRAY_SIZE(smc91x_resources),
 304         .resource       = smc91x_resources,
 305 };
 306
 307 #define VERSATILE_SYSMCI        (IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_MCI_OFFSET)
 308
 309 unsigned int mmc_status(struct device *dev)
 310 {
 311         struct amba_device *adev = container_of(dev, struct amba_device, dev);
 312         u32 mask;
 313
 314         if (adev->res.start == VERSATILE_MMCI0_BASE)
 315                 mask = 1;
 316         else
 317                 mask = 2;
 318
 319         return readl(VERSATILE_SYSMCI) & mask;
 320 }
 321
 322 static struct mmc_platform_data mmc0_plat_data = {
 323         .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
 324         .status         = mmc_status,
 325 };
 326
 327 /*
 328  * Clock handling
 329  */
 330 static const struct icst307_params versatile_oscvco_params = {
 331         .ref            = 24000,
 332         .vco_max        = 200000,
 333         .vd_min         = 4 + 8,
 334         .vd_max         = 511 + 8,
 335         .rd_min         = 1 + 2,
 336         .rd_max         = 127 + 2,
 337 };
 338
 339 static void versatile_oscvco_set(struct clk *clk, struct icst307_vco vco)
 340 {
 341         unsigned long sys_lock = IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_LOCK_OFFSET;
 342 #if defined(CONFIG_ARCH_VERSATILE_PB)
 343         unsigned long sys_osc = IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSC4_OFFSET;
 344 #elif defined(CONFIG_MACH_VERSATILE_AB)
 345         unsigned long sys_osc = IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSC1_OFFSET;
 346 #endif
 347         u32 val;
 348
 349         val = readl(sys_osc) & ~0x7ffff;
 350         val |= vco.v | (vco.r << 9) | (vco.s << 16);
 351
 352         writel(0xa05f, sys_lock);
 353         writel(val, sys_osc);
 354         writel(0, sys_lock);
 355 }
 356
 357 static struct clk versatile_clcd_clk = {
 358         .name   = "CLCDCLK",
 359         .params = &versatile_oscvco_params,
 360         .setvco = versatile_oscvco_set,
 361 };
 362
 363 /*
 364  * CLCD support.
 365  */
 366 #define SYS_CLCD_MODE_MASK      (3 << 0)
 367 #define SYS_CLCD_MODE_888       (0 << 0)
 368 #define SYS_CLCD_MODE_5551      (1 << 0)
 369 #define SYS_CLCD_MODE_565_RLSB  (2 << 0)
 370 #define SYS_CLCD_MODE_565_BLSB  (3 << 0)
 371 #define SYS_CLCD_NLCDIOON       (1 << 2)
 372 #define SYS_CLCD_VDDPOSSWITCH   (1 << 3)
 373 #define SYS_CLCD_PWR3V5SWITCH   (1 << 4)
 374 #define SYS_CLCD_ID_MASK        (0x1f << 8)
 375 #define SYS_CLCD_ID_SANYO_3_8   (0x00 << 8)
 376 #define SYS_CLCD_ID_UNKNOWN_8_4 (0x01 << 8)
 377 #define SYS_CLCD_ID_EPSON_2_2   (0x02 << 8)
 378 #define SYS_CLCD_ID_SANYO_2_5   (0x07 << 8)
 379 #define SYS_CLCD_ID_VGA         (0x1f << 8)
 380
 381 static struct clcd_panel vga = {
 382         .mode           = {
 383                 .name           = "VGA",
 384                 .refresh        = 60,
 385                 .xres           = 640,
 386                 .yres           = 480,
 387                 .pixclock       = 39721,
 388                 .left_margin    = 40,
 389                 .right_margin   = 24,
 390                 .upper_margin   = 32,
 391                 .lower_margin   = 11,
 392                 .hsync_len      = 96,
 393                 .vsync_len      = 2,
 394                 .sync           = 0,
 395                 .vmode          = FB_VMODE_NONINTERLACED,
 396         },
 397         .width          = -1,
 398         .height         = -1,
 399         .tim2           = TIM2_BCD | TIM2_IPC,
 400         .cntl           = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
 401         .bpp            = 16,
 402 };
 403
 404 static struct clcd_panel sanyo_3_8_in = {
 405         .mode           = {
 406                 .name           = "Sanyo QVGA",
 407                 .refresh        = 116,
 408                 .xres           = 320,
 409                 .yres           = 240,
 410                 .pixclock       = 100000,
 411                 .left_margin    = 6,
 412                 .right_margin   = 6,
 413                 .upper_margin   = 5,
 414                 .lower_margin   = 5,
 415                 .hsync_len      = 6,
 416                 .vsync_len      = 6,
 417                 .sync           = 0,
 418                 .vmode          = FB_VMODE_NONINTERLACED,
 419         },
 420         .width          = -1,
 421         .height         = -1,
 422         .tim2           = TIM2_BCD,
 423         .cntl           = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
 424         .bpp            = 16,
 425 };
 426
 427 static struct clcd_panel sanyo_2_5_in = {
 428         .mode           = {
 429                 .name           = "Sanyo QVGA Portrait",
 430                 .refresh        = 116,
 431                 .xres           = 240,
 432                 .yres           = 320,
 433                 .pixclock       = 100000,
 434                 .left_margin    = 20,
 435                 .right_margin   = 10,
 436                 .upper_margin   = 2,
 437                 .lower_margin   = 2,
 438                 .hsync_len      = 10,
 439                 .vsync_len      = 2,
 440                 .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 441                 .vmode          = FB_VMODE_NONINTERLACED,
 442         },
 443         .width          = -1,
 444         .height         = -1,
 445         .tim2           = TIM2_IVS | TIM2_IHS | TIM2_IPC,
 446         .cntl           = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
 447         .bpp            = 16,
 448 };
 449
 450 static struct clcd_panel epson_2_2_in = {
 451         .mode           = {
 452                 .name           = "Epson QCIF",
 453                 .refresh        = 390,
 454                 .xres           = 176,
 455                 .yres           = 220,
 456                 .pixclock       = 62500,
 457                 .left_margin    = 3,
 458                 .right_margin   = 2,
 459                 .upper_margin   = 1,
 460                 .lower_margin   = 0,
 461                 .hsync_len      = 3,
 462                 .vsync_len      = 2,
 463                 .sync           = 0,
 464                 .vmode          = FB_VMODE_NONINTERLACED,
 465         },
 466         .width          = -1,
 467         .height         = -1,
 468         .tim2           = TIM2_BCD | TIM2_IPC,
 469         .cntl           = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
 470         .bpp            = 16,
 471 };
 472
 473 /*
 474  * Detect which LCD panel is connected, and return the appropriate
 475  * clcd_panel structure.  Note: we do not have any information on
 476  * the required timings for the 8.4in panel, so we presently assume
 477  * VGA timings.
 478  */
 479 static struct clcd_panel *versatile_clcd_panel(void)
 480 {
 481         unsigned long sys_clcd = IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
 482         struct clcd_panel *panel = &vga;
 483         u32 val;
 484
 485         val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
 486         if (val == SYS_CLCD_ID_SANYO_3_8)
 487                 panel = &sanyo_3_8_in;
 488         else if (val == SYS_CLCD_ID_SANYO_2_5)
 489                 panel = &sanyo_2_5_in;
 490         else if (val == SYS_CLCD_ID_EPSON_2_2)
 491                 panel = &epson_2_2_in;
 492         else if (val == SYS_CLCD_ID_VGA)
 493                 panel = &vga;
 494         else {
 495                 printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n",
 496                         val);
 497                 panel = &vga;
 498         }
 499
 500         return panel;
 501 }
 502
 503 /*
 504  * Disable all display connectors on the interface module.
 505  */
 506 static void versatile_clcd_disable(struct clcd_fb *fb)
 507 {
 508         unsigned long sys_clcd = IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
 509         u32 val;
 510
 511         val = readl(sys_clcd);
 512         val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
 513         writel(val, sys_clcd);
 514
 515 #ifdef CONFIG_MACH_VERSATILE_AB
 516         /*
 517          * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light off
 518          */
 519         if (fb->panel == &sanyo_2_5_in) {
 520                 unsigned long versatile_ib2_ctrl = IO_ADDRESS(VERSATILE_IB2_CTRL);
 521                 unsigned long ctrl;
 522
 523                 ctrl = readl(versatile_ib2_ctrl);
 524                 ctrl &= ~0x01;
 525                 writel(ctrl, versatile_ib2_ctrl);
 526         }
 527 #endif
 528 }
 529
 530 /*
 531  * Enable the relevant connector on the interface module.
 532  */
 533 static void versatile_clcd_enable(struct clcd_fb *fb)
 534 {
 535         unsigned long sys_clcd = IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
 536         u32 val;
 537
 538         val = readl(sys_clcd);
 539         val &= ~SYS_CLCD_MODE_MASK;
 540
 541         switch (fb->fb.var.green.length) {
 542         case 5:
 543                 val |= SYS_CLCD_MODE_5551;
 544                 break;
 545         case 6:
 546                 val |= SYS_CLCD_MODE_565_RLSB;
 547                 break;
 548         case 8:
 549                 val |= SYS_CLCD_MODE_888;
 550                 break;
 551         }
 552
 553         /*
 554          * Set the MUX
 555          */
 556         writel(val, sys_clcd);
 557
 558         /*
 559          * And now enable the PSUs
 560          */
 561         val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
 562         writel(val, sys_clcd);
 563
 564 #ifdef CONFIG_MACH_VERSATILE_AB
 565         /*
 566          * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light on
 567          */
 568         if (fb->panel == &sanyo_2_5_in) {
 569                 unsigned long versatile_ib2_ctrl = IO_ADDRESS(VERSATILE_IB2_CTRL);
 570                 unsigned long ctrl;
 571
 572                 ctrl = readl(versatile_ib2_ctrl);
 573                 ctrl |= 0x01;
 574                 writel(ctrl, versatile_ib2_ctrl);
 575         }
 576 #endif
 577 }
 578
 579 static unsigned long framesize = SZ_1M;
 580
 581 static int versatile_clcd_setup(struct clcd_fb *fb)
 582 {
 583         dma_addr_t dma;
 584
 585         fb->panel               = versatile_clcd_panel();
 586
 587         fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize,
 588                                                     &dma, GFP_KERNEL);
 589         if (!fb->fb.screen_base) {
 590                 printk(KERN_ERR "CLCD: unable to map framebuffer\n");
 591                 return -ENOMEM;
 592         }
 593
 594         fb->fb.fix.smem_start   = dma;
 595         fb->fb.fix.smem_len     = framesize;
 596
 597         return 0;
 598 }
 599
 600 static int versatile_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
 601 {
 602         return dma_mmap_writecombine(&fb->dev->dev, vma,
 603                                      fb->fb.screen_base,
 604                                      fb->fb.fix.smem_start,
 605                                      fb->fb.fix.smem_len);
 606 }
 607
 608 static void versatile_clcd_remove(struct clcd_fb *fb)
 609 {
 610         dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
 611                               fb->fb.screen_base, fb->fb.fix.smem_start);
 612 }
 613
 614 static struct clcd_board clcd_plat_data = {
 615         .name           = "Versatile",
 616         .check          = clcdfb_check,
 617         .decode         = clcdfb_decode,
 618         .disable        = versatile_clcd_disable,
 619         .enable         = versatile_clcd_enable,
 620         .setup          = versatile_clcd_setup,
 621         .mmap           = versatile_clcd_mmap,
 622         .remove         = versatile_clcd_remove,
 623 };
 624
 625 #define AACI_IRQ        { IRQ_AACI, NO_IRQ }
 626 #define AACI_DMA        { 0x80, 0x81 }
 627 #define MMCI0_IRQ       { IRQ_MMCI0A,IRQ_SIC_MMCI0B }
 628 #define MMCI0_DMA       { 0x84, 0 }
 629 #define KMI0_IRQ        { IRQ_SIC_KMI0, NO_IRQ }
 630 #define KMI0_DMA        { 0, 0 }
 631 #define KMI1_IRQ        { IRQ_SIC_KMI1, NO_IRQ }
 632 #define KMI1_DMA        { 0, 0 }
 633
 634 /*
 635  * These devices are connected directly to the multi-layer AHB switch
 636  */
 637 #define SMC_IRQ         { NO_IRQ, NO_IRQ }
 638 #define SMC_DMA         { 0, 0 }
 639 #define MPMC_IRQ        { NO_IRQ, NO_IRQ }
 640 #define MPMC_DMA        { 0, 0 }
 641 #define CLCD_IRQ        { IRQ_CLCDINT, NO_IRQ }
 642 #define CLCD_DMA        { 0, 0 }
 643 #define DMAC_IRQ        { IRQ_DMAINT, NO_IRQ }
 644 #define DMAC_DMA        { 0, 0 }
 645
 646 /*
 647  * These devices are connected via the core APB bridge
 648  */
 649 #define SCTL_IRQ        { NO_IRQ, NO_IRQ }
 650 #define SCTL_DMA        { 0, 0 }
 651 #define WATCHDOG_IRQ    { IRQ_WDOGINT, NO_IRQ }
 652 #define WATCHDOG_DMA    { 0, 0 }
 653 #define GPIO0_IRQ       { IRQ_GPIOINT0, NO_IRQ }
 654 #define GPIO0_DMA       { 0, 0 }
 655 #define GPIO1_IRQ       { IRQ_GPIOINT1, NO_IRQ }
 656 #define GPIO1_DMA       { 0, 0 }
 657 #define RTC_IRQ         { IRQ_RTCINT, NO_IRQ }
 658 #define RTC_DMA         { 0, 0 }
 659
 660 /*
 661  * These devices are connected via the DMA APB bridge
 662  */
 663 #define SCI_IRQ         { IRQ_SCIINT, NO_IRQ }
 664 #define SCI_DMA         { 7, 6 }
 665 #define UART0_IRQ       { IRQ_UARTINT0, NO_IRQ }
 666 #define UART0_DMA       { 15, 14 }
 667 #define UART1_IRQ       { IRQ_UARTINT1, NO_IRQ }
 668 #define UART1_DMA       { 13, 12 }
 669 #define UART2_IRQ       { IRQ_UARTINT2, NO_IRQ }
 670 #define UART2_DMA       { 11, 10 }
 671 #define SSP_IRQ         { IRQ_SSPINT, NO_IRQ }
 672 #define SSP_DMA         { 9, 8 }
 673
 674 /* FPGA Primecells */
 675 AMBA_DEVICE(aaci,  "fpga:04", AACI,     NULL);
 676 AMBA_DEVICE(mmc0,  "fpga:05", MMCI0,    &mmc0_plat_data);
 677 AMBA_DEVICE(kmi0,  "fpga:06", KMI0,     NULL);
 678 AMBA_DEVICE(kmi1,  "fpga:07", KMI1,     NULL);
 679
 680 /* DevChip Primecells */
 681 AMBA_DEVICE(smc,   "dev:00",  SMC,      NULL);
 682 AMBA_DEVICE(mpmc,  "dev:10",  MPMC,     NULL);
 683 AMBA_DEVICE(clcd,  "dev:20",  CLCD,     &clcd_plat_data);
 684 AMBA_DEVICE(dmac,  "dev:30",  DMAC,     NULL);
 685 AMBA_DEVICE(sctl,  "dev:e0",  SCTL,     NULL);
 686 AMBA_DEVICE(wdog,  "dev:e1",  WATCHDOG, NULL);
 687 AMBA_DEVICE(gpio0, "dev:e4",  GPIO0,    NULL);
 688 AMBA_DEVICE(gpio1, "dev:e5",  GPIO1,    NULL);
 689 AMBA_DEVICE(rtc,   "dev:e8",  RTC,      NULL);
 690 AMBA_DEVICE(sci0,  "dev:f0",  SCI,      NULL);
 691 AMBA_DEVICE(uart0, "dev:f1",  UART0,    NULL);
 692 AMBA_DEVICE(uart1, "dev:f2",  UART1,    NULL);
 693 AMBA_DEVICE(uart2, "dev:f3",  UART2,    NULL);
 694 AMBA_DEVICE(ssp0,  "dev:f4",  SSP,      NULL);
 695
 696 static struct amba_device *amba_devs[] __initdata = {
 697         &dmac_device,
 698         &uart0_device,
 699         &uart1_device,
 700         &uart2_device,
 701         &smc_device,
 702         &mpmc_device,
 703         &clcd_device,
 704         &sctl_device,
 705         &wdog_device,
 706         &gpio0_device,
 707         &gpio1_device,
 708         &rtc_device,
 709         &sci0_device,
 710         &ssp0_device,
 711         &aaci_device,
 712         &mmc0_device,
 713         &kmi0_device,
 714         &kmi1_device,
 715 };
 716
 717 #ifdef CONFIG_LEDS
 718 #define VA_LEDS_BASE (IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_LED_OFFSET)
 719
 720 static void versatile_leds_event(led_event_t ledevt)
 721 {
 722         unsigned long flags;
 723         u32 val;
 724
 725         local_irq_save(flags);
 726         val = readl(VA_LEDS_BASE);
 727
 728         switch (ledevt) {
 729         case led_idle_start:
 730                 val = val & ~VERSATILE_SYS_LED0;
 731                 break;
 732
 733         case led_idle_end:
 734                 val = val | VERSATILE_SYS_LED0;
 735                 break;
 736
 737         case led_timer:
 738                 val = val ^ VERSATILE_SYS_LED1;
 739                 break;
 740
 741         case led_halted:
 742                 val = 0;
 743                 break;
 744
 745         default:
 746                 break;
 747         }
 748
 749         writel(val, VA_LEDS_BASE);
 750         local_irq_restore(flags);
 751 }
 752 #endif  /* CONFIG_LEDS */
 753
 754 void __init versatile_init(void)
 755 {
 756         int i;
 757
 758         clk_register(&versatile_clcd_clk);
 759
 760         platform_device_register(&versatile_flash_device);
 761         platform_device_register(&smc91x_device);
 762
 763         for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 764                 struct amba_device *d = amba_devs[i];
 765                 amba_device_register(d, &iomem_resource);
 766         }
 767
 768 #ifdef CONFIG_LEDS
 769         leds_event = versatile_leds_event;
 770 #endif
 771 }
 772
 773 /*
 774  * Where is the timer (VA)?
 775  */
 776 #define TIMER0_VA_BASE           IO_ADDRESS(VERSATILE_TIMER0_1_BASE)
 777 #define TIMER1_VA_BASE          (IO_ADDRESS(VERSATILE_TIMER0_1_BASE) + 0x20)
 778 #define TIMER2_VA_BASE           IO_ADDRESS(VERSATILE_TIMER2_3_BASE)
 779 #define TIMER3_VA_BASE          (IO_ADDRESS(VERSATILE_TIMER2_3_BASE) + 0x20)
 780 #define VA_IC_BASE               IO_ADDRESS(VERSATILE_VIC_BASE)
 781
 782 /*
 783  * How long is the timer interval?
 784  */
 785 #define TIMER_INTERVAL  (TICKS_PER_uSEC * mSEC_10)
 786 #if TIMER_INTERVAL >= 0x100000
 787 #define TIMER_RELOAD    (TIMER_INTERVAL >> 8)           /* Divide by 256 */
 788 #define TIMER_CTRL      0x88                            /* Enable, Clock / 256 */
 789 #define TICKS2USECS(x)  (256 * (x) / TICKS_PER_uSEC)
 790 #elif TIMER_INTERVAL >= 0x10000
 791 #define TIMER_RELOAD    (TIMER_INTERVAL >> 4)           /* Divide by 16 */
 792 #define TIMER_CTRL      0x84                            /* Enable, Clock / 16 */
 793 #define TICKS2USECS(x)  (16 * (x) / TICKS_PER_uSEC)
 794 #else
 795 #define TIMER_RELOAD    (TIMER_INTERVAL)
 796 #define TIMER_CTRL      0x80                            /* Enable */
 797 #define TICKS2USECS(x)  ((x) / TICKS_PER_uSEC)
 798 #endif
 799
 800 #define TIMER_CTRL_IE   (1 << 5)        /* Interrupt Enable */
 801
 802 /*
 803  * What does it look like?
 804  */
 805 typedef struct TimerStruct {
 806         unsigned long TimerLoad;
 807         unsigned long TimerValue;
 808         unsigned long TimerControl;
 809         unsigned long TimerClear;
 810 } TimerStruct_t;
 811
 812 /*
 813  * Returns number of ms since last clock interrupt.  Note that interrupts
 814  * will have been disabled by do_gettimeoffset()
 815  */
 816 static unsigned long versatile_gettimeoffset(void)
 817 {
 818         volatile TimerStruct_t *timer0 = (TimerStruct_t *)TIMER0_VA_BASE;
 819         unsigned long ticks1, ticks2, status;
 820
 821         /*
 822          * Get the current number of ticks.  Note that there is a race
 823          * condition between us reading the timer and checking for
 824          * an interrupt.  We get around this by ensuring that the
 825          * counter has not reloaded between our two reads.
 826          */
 827         ticks2 = timer0->TimerValue & 0xffff;
 828         do {
 829                 ticks1 = ticks2;
 830                 status = __raw_readl(VA_IC_BASE + VIC_IRQ_RAW_STATUS);
 831                 ticks2 = timer0->TimerValue & 0xffff;
 832         } while (ticks2 > ticks1);
 833
 834         /*
 835          * Number of ticks since last interrupt.
 836          */
 837         ticks1 = TIMER_RELOAD - ticks2;
 838
 839         /*
 840          * Interrupt pending?  If so, we've reloaded once already.
 841          *
 842          * FIXME: Need to check this is effectively timer 0 that expires
 843          */
 844         if (status & IRQMASK_TIMERINT0_1)
 845                 ticks1 += TIMER_RELOAD;
 846
 847         /*
 848          * Convert the ticks to usecs
 849          */
 850         return TICKS2USECS(ticks1);
 851 }
 852
 853 /*
 854  * IRQ handler for the timer
 855  */
 856 static irqreturn_t versatile_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 857 {
 858         volatile TimerStruct_t *timer0 = (volatile TimerStruct_t *)TIMER0_VA_BASE;
 859
 860         write_seqlock(&xtime_lock);
 861
 862         // ...clear the interrupt
 863         timer0->TimerClear = 1;
 864
 865         timer_tick(regs);
 866
 867         write_sequnlock(&xtime_lock);
 868
 869         return IRQ_HANDLED;
 870 }
 871
 872 static struct irqaction versatile_timer_irq = {
 873         .name           = "Versatile Timer Tick",
 874         .flags          = SA_INTERRUPT,
 875         .handler        = versatile_timer_interrupt
 876 };
 877
 878 /*
 879  * Set up timer interrupt, and return the current time in seconds.
 880  */
 881 static void __init versatile_timer_init(void)
 882 {
 883         volatile TimerStruct_t *timer0 = (volatile TimerStruct_t *)TIMER0_VA_BASE;
 884         volatile TimerStruct_t *timer1 = (volatile TimerStruct_t *)TIMER1_VA_BASE;
 885         volatile TimerStruct_t *timer2 = (volatile TimerStruct_t *)TIMER2_VA_BASE;
 886         volatile TimerStruct_t *timer3 = (volatile TimerStruct_t *)TIMER3_VA_BASE;
 887
 888         /*
 889          * set clock frequency:
 890          *      VERSATILE_REFCLK is 32KHz
 891          *      VERSATILE_TIMCLK is 1MHz
 892          */
 893         *(volatile unsigned int *)IO_ADDRESS(VERSATILE_SCTL_BASE) |=
 894           ((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) | (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) |
 895            (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) | (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel));
 896
 897         /*
 898          * Initialise to a known state (all timers off)
 899          */
 900         timer0->TimerControl = 0;
 901         timer1->TimerControl = 0;
 902         timer2->TimerControl = 0;
 903         timer3->TimerControl = 0;
 904
 905         timer0->TimerLoad    = TIMER_RELOAD;
 906         timer0->TimerValue   = TIMER_RELOAD;
 907         timer0->TimerControl = TIMER_CTRL | 0x40 | TIMER_CTRL_IE;  /* periodic + IE */
 908
 909         /*
 910          * Make irqs happen for the system timer
 911          */
 912         setup_irq(IRQ_TIMERINT0_1, &versatile_timer_irq);
 913 }
 914
 915 struct sys_timer versatile_timer = {
 916         .init           = versatile_timer_init,
 917         .offset         = versatile_gettimeoffset,
 918 };