Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
[linux-2.6] / drivers / net / hamradio / baycom_epp.c
1 /*****************************************************************************/
2
3 /*
4  *      baycom_epp.c  -- baycom epp radio modem driver.
5  *
6  *      Copyright (C) 1998-2000
7  *          Thomas Sailer (sailer@ife.ee.ethz.ch)
8  *
9  *      This program is free software; you can redistribute it and/or modify
10  *      it under the terms of the GNU General Public License as published by
11  *      the Free Software Foundation; either version 2 of the License, or
12  *      (at your option) any later version.
13  *
14  *      This program is distributed in the hope that it will be useful,
15  *      but WITHOUT ANY WARRANTY; without even the implied warranty of
16  *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17  *      GNU General Public License for more details.
18  *
19  *      You should have received a copy of the GNU General Public License
20  *      along with this program; if not, write to the Free Software
21  *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22  *
23  *  Please note that the GPL allows you to use the driver, NOT the radio.
24  *  In order to use the radio, you need a license from the communications
25  *  authority of your country.
26  *
27  *
28  *  History:
29  *   0.1  xx.xx.1998  Initial version by Matthias Welwarsky (dg2fef)
30  *   0.2  21.04.1998  Massive rework by Thomas Sailer
31  *                    Integrated FPGA EPP modem configuration routines
32  *   0.3  11.05.1998  Took FPGA config out and moved it into a separate program
33  *   0.4  26.07.1999  Adapted to new lowlevel parport driver interface
34  *   0.5  03.08.1999  adapt to Linus' new __setup/__initcall
35  *                    removed some pre-2.2 kernel compatibility cruft
36  *   0.6  10.08.1999  Check if parport can do SPP and is safe to access during interrupt contexts
37  *   0.7  12.02.2000  adapted to softnet driver interface
38  *
39  */
40
41 /*****************************************************************************/
42
43 #include <linux/crc-ccitt.h>
44 #include <linux/module.h>
45 #include <linux/kernel.h>
46 #include <linux/init.h>
47 #include <linux/string.h>
48 #include <linux/workqueue.h>
49 #include <linux/fs.h>
50 #include <linux/parport.h>
51 #include <linux/if_arp.h>
52 #include <linux/hdlcdrv.h>
53 #include <linux/baycom.h>
54 #include <linux/jiffies.h>
55 #include <linux/random.h>
56 #include <net/ax25.h> 
57 #include <asm/uaccess.h>
58
59 /* --------------------------------------------------------------------- */
60
61 #define BAYCOM_DEBUG
62 #define BAYCOM_MAGIC 19730510
63
64 /* --------------------------------------------------------------------- */
65
66 static const char paranoia_str[] = KERN_ERR 
67         "baycom_epp: bad magic number for hdlcdrv_state struct in routine %s\n";
68
69 static const char bc_drvname[] = "baycom_epp";
70 static const char bc_drvinfo[] = KERN_INFO "baycom_epp: (C) 1998-2000 Thomas Sailer, HB9JNX/AE4WA\n"
71 KERN_INFO "baycom_epp: version 0.7 compiled " __TIME__ " " __DATE__ "\n";
72
73 /* --------------------------------------------------------------------- */
74
75 #define NR_PORTS 4
76
77 static struct net_device *baycom_device[NR_PORTS];
78
79 /* --------------------------------------------------------------------- */
80
81 /* EPP status register */
82 #define EPP_DCDBIT      0x80
83 #define EPP_PTTBIT      0x08
84 #define EPP_NREF        0x01
85 #define EPP_NRAEF       0x02
86 #define EPP_NRHF        0x04
87 #define EPP_NTHF        0x20
88 #define EPP_NTAEF       0x10
89 #define EPP_NTEF        EPP_PTTBIT
90
91 /* EPP control register */
92 #define EPP_TX_FIFO_ENABLE 0x10
93 #define EPP_RX_FIFO_ENABLE 0x08
94 #define EPP_MODEM_ENABLE   0x20
95 #define EPP_LEDS           0xC0
96 #define EPP_IRQ_ENABLE     0x10
97
98 /* LPT registers */
99 #define LPTREG_ECONTROL       0x402
100 #define LPTREG_CONFIGB        0x401
101 #define LPTREG_CONFIGA        0x400
102 #define LPTREG_EPPDATA        0x004
103 #define LPTREG_EPPADDR        0x003
104 #define LPTREG_CONTROL        0x002
105 #define LPTREG_STATUS         0x001
106 #define LPTREG_DATA           0x000
107
108 /* LPT control register */
109 #define LPTCTRL_PROGRAM       0x04   /* 0 to reprogram */
110 #define LPTCTRL_WRITE         0x01
111 #define LPTCTRL_ADDRSTB       0x08
112 #define LPTCTRL_DATASTB       0x02
113 #define LPTCTRL_INTEN         0x10
114
115 /* LPT status register */
116 #define LPTSTAT_SHIFT_NINTR   6
117 #define LPTSTAT_WAIT          0x80
118 #define LPTSTAT_NINTR         (1<<LPTSTAT_SHIFT_NINTR)
119 #define LPTSTAT_PE            0x20
120 #define LPTSTAT_DONE          0x10
121 #define LPTSTAT_NERROR        0x08
122 #define LPTSTAT_EPPTIMEOUT    0x01
123
124 /* LPT data register */
125 #define LPTDATA_SHIFT_TDI     0
126 #define LPTDATA_SHIFT_TMS     2
127 #define LPTDATA_TDI           (1<<LPTDATA_SHIFT_TDI)
128 #define LPTDATA_TCK           0x02
129 #define LPTDATA_TMS           (1<<LPTDATA_SHIFT_TMS)
130 #define LPTDATA_INITBIAS      0x80
131
132
133 /* EPP modem config/status bits */
134 #define EPP_DCDBIT            0x80
135 #define EPP_PTTBIT            0x08
136 #define EPP_RXEBIT            0x01
137 #define EPP_RXAEBIT           0x02
138 #define EPP_RXHFULL           0x04
139
140 #define EPP_NTHF              0x20
141 #define EPP_NTAEF             0x10
142 #define EPP_NTEF              EPP_PTTBIT
143
144 #define EPP_TX_FIFO_ENABLE    0x10
145 #define EPP_RX_FIFO_ENABLE    0x08
146 #define EPP_MODEM_ENABLE      0x20
147 #define EPP_LEDS              0xC0
148 #define EPP_IRQ_ENABLE        0x10
149
150 /* Xilinx 4k JTAG instructions */
151 #define XC4K_IRLENGTH   3
152 #define XC4K_EXTEST     0
153 #define XC4K_PRELOAD    1
154 #define XC4K_CONFIGURE  5
155 #define XC4K_BYPASS     7
156
157 #define EPP_CONVENTIONAL  0
158 #define EPP_FPGA          1
159 #define EPP_FPGAEXTSTATUS 2
160
161 #define TXBUFFER_SIZE     ((HDLCDRV_MAXFLEN*6/5)+8)
162
163 /* ---------------------------------------------------------------------- */
164 /*
165  * Information that need to be kept for each board.
166  */
167
168 struct baycom_state {
169         int magic;
170
171         struct pardevice *pdev;
172         struct net_device *dev;
173         unsigned int work_running;
174         struct delayed_work run_work;
175         unsigned int modem;
176         unsigned int bitrate;
177         unsigned char stat;
178
179         struct {
180                 unsigned int intclk;
181                 unsigned int fclk;
182                 unsigned int bps;
183                 unsigned int extmodem;
184                 unsigned int loopback;
185         } cfg;
186
187         struct hdlcdrv_channel_params ch_params;
188
189         struct {
190                 unsigned int bitbuf, bitstream, numbits, state;
191                 unsigned char *bufptr;
192                 int bufcnt;
193                 unsigned char buf[TXBUFFER_SIZE];
194         } hdlcrx;
195
196         struct {
197                 int calibrate;
198                 int slotcnt;
199                 int flags;
200                 enum { tx_idle = 0, tx_keyup, tx_data, tx_tail } state;
201                 unsigned char *bufptr;
202                 int bufcnt;
203                 unsigned char buf[TXBUFFER_SIZE];
204         } hdlctx;
205
206         unsigned int ptt_keyed;
207         struct sk_buff *skb;  /* next transmit packet  */
208
209 #ifdef BAYCOM_DEBUG
210         struct debug_vals {
211                 unsigned long last_jiffies;
212                 unsigned cur_intcnt;
213                 unsigned last_intcnt;
214                 int cur_pllcorr;
215                 int last_pllcorr;
216                 unsigned int mod_cycles;
217                 unsigned int demod_cycles;
218         } debug_vals;
219 #endif /* BAYCOM_DEBUG */
220 };
221
222 /* --------------------------------------------------------------------- */
223
224 #define KISS_VERBOSE
225
226 /* --------------------------------------------------------------------- */
227
228 #define PARAM_TXDELAY   1
229 #define PARAM_PERSIST   2
230 #define PARAM_SLOTTIME  3
231 #define PARAM_TXTAIL    4
232 #define PARAM_FULLDUP   5
233 #define PARAM_HARDWARE  6
234 #define PARAM_RETURN    255
235
236 /* --------------------------------------------------------------------- */
237 /*
238  * the CRC routines are stolen from WAMPES
239  * by Dieter Deyke
240  */
241
242
243 /*---------------------------------------------------------------------------*/
244
245 #if 0
246 static inline void append_crc_ccitt(unsigned char *buffer, int len)
247 {
248         unsigned int crc = 0xffff;
249
250         for (;len>0;len--)
251                 crc = (crc >> 8) ^ crc_ccitt_table[(crc ^ *buffer++) & 0xff];
252         crc ^= 0xffff;
253         *buffer++ = crc;
254         *buffer++ = crc >> 8;
255 }
256 #endif
257
258 /*---------------------------------------------------------------------------*/
259
260 static inline int check_crc_ccitt(const unsigned char *buf, int cnt)
261 {
262         return (crc_ccitt(0xffff, buf, cnt) & 0xffff) == 0xf0b8;
263 }
264
265 /*---------------------------------------------------------------------------*/
266
267 static inline int calc_crc_ccitt(const unsigned char *buf, int cnt)
268 {
269         return (crc_ccitt(0xffff, buf, cnt) ^ 0xffff) & 0xffff;
270 }
271
272 /* ---------------------------------------------------------------------- */
273
274 #define tenms_to_flags(bc,tenms) ((tenms * bc->bitrate) / 800)
275
276 /* --------------------------------------------------------------------- */
277
278 static inline void baycom_int_freq(struct baycom_state *bc)
279 {
280 #ifdef BAYCOM_DEBUG
281         unsigned long cur_jiffies = jiffies;
282         /*
283          * measure the interrupt frequency
284          */
285         bc->debug_vals.cur_intcnt++;
286         if (time_after_eq(cur_jiffies, bc->debug_vals.last_jiffies + HZ)) {
287                 bc->debug_vals.last_jiffies = cur_jiffies;
288                 bc->debug_vals.last_intcnt = bc->debug_vals.cur_intcnt;
289                 bc->debug_vals.cur_intcnt = 0;
290                 bc->debug_vals.last_pllcorr = bc->debug_vals.cur_pllcorr;
291                 bc->debug_vals.cur_pllcorr = 0;
292         }
293 #endif /* BAYCOM_DEBUG */
294 }
295
296 /* ---------------------------------------------------------------------- */
297 /*
298  *    eppconfig_path should be setable  via /proc/sys.
299  */
300
301 static char eppconfig_path[256] = "/usr/sbin/eppfpga";
302
303 static char *envp[] = { "HOME=/", "TERM=linux", "PATH=/usr/bin:/bin", NULL };
304
305 /* eppconfig: called during ifconfig up to configure the modem */
306 static int eppconfig(struct baycom_state *bc)
307 {
308         char modearg[256];
309         char portarg[16];
310         char *argv[] = { eppconfig_path, "-s", "-p", portarg, "-m", modearg,
311                          NULL };
312
313         /* set up arguments */
314         sprintf(modearg, "%sclk,%smodem,fclk=%d,bps=%d,divider=%d%s,extstat",
315                 bc->cfg.intclk ? "int" : "ext",
316                 bc->cfg.extmodem ? "ext" : "int", bc->cfg.fclk, bc->cfg.bps,
317                 (bc->cfg.fclk + 8 * bc->cfg.bps) / (16 * bc->cfg.bps),
318                 bc->cfg.loopback ? ",loopback" : "");
319         sprintf(portarg, "%ld", bc->pdev->port->base);
320         printk(KERN_DEBUG "%s: %s -s -p %s -m %s\n", bc_drvname, eppconfig_path, portarg, modearg);
321
322         return call_usermodehelper(eppconfig_path, argv, envp, UMH_WAIT_PROC);
323 }
324
325 /* ---------------------------------------------------------------------- */
326
327 static inline void do_kiss_params(struct baycom_state *bc,
328                                   unsigned char *data, unsigned long len)
329 {
330
331 #ifdef KISS_VERBOSE
332 #define PKP(a,b) printk(KERN_INFO "baycomm_epp: channel params: " a "\n", b)
333 #else /* KISS_VERBOSE */              
334 #define PKP(a,b) 
335 #endif /* KISS_VERBOSE */             
336
337         if (len < 2)
338                 return;
339         switch(data[0]) {
340         case PARAM_TXDELAY:
341                 bc->ch_params.tx_delay = data[1];
342                 PKP("TX delay = %ums", 10 * bc->ch_params.tx_delay);
343                 break;
344         case PARAM_PERSIST:   
345                 bc->ch_params.ppersist = data[1];
346                 PKP("p persistence = %u", bc->ch_params.ppersist);
347                 break;
348         case PARAM_SLOTTIME:  
349                 bc->ch_params.slottime = data[1];
350                 PKP("slot time = %ums", bc->ch_params.slottime);
351                 break;
352         case PARAM_TXTAIL:    
353                 bc->ch_params.tx_tail = data[1];
354                 PKP("TX tail = %ums", bc->ch_params.tx_tail);
355                 break;
356         case PARAM_FULLDUP:   
357                 bc->ch_params.fulldup = !!data[1];
358                 PKP("%s duplex", bc->ch_params.fulldup ? "full" : "half");
359                 break;
360         default:
361                 break;
362         }
363 #undef PKP
364 }
365
366 /* --------------------------------------------------------------------- */
367
368 static void encode_hdlc(struct baycom_state *bc)
369 {
370         struct sk_buff *skb;
371         unsigned char *wp, *bp;
372         int pkt_len;
373         unsigned bitstream, notbitstream, bitbuf, numbit, crc;
374         unsigned char crcarr[2];
375         int j;
376         
377         if (bc->hdlctx.bufcnt > 0)
378                 return;
379         skb = bc->skb;
380         if (!skb)
381                 return;
382         bc->skb = NULL;
383         pkt_len = skb->len-1; /* strip KISS byte */
384         wp = bc->hdlctx.buf;
385         bp = skb->data+1;
386         crc = calc_crc_ccitt(bp, pkt_len);
387         crcarr[0] = crc;
388         crcarr[1] = crc >> 8;
389         *wp++ = 0x7e;
390         bitstream = bitbuf = numbit = 0;
391         while (pkt_len > -2) {
392                 bitstream >>= 8;
393                 bitstream |= ((unsigned int)*bp) << 8;
394                 bitbuf |= ((unsigned int)*bp) << numbit;
395                 notbitstream = ~bitstream;
396                 bp++;
397                 pkt_len--;
398                 if (!pkt_len)
399                         bp = crcarr;
400                 for (j = 0; j < 8; j++)
401                         if (unlikely(!(notbitstream & (0x1f0 << j)))) {
402                                 bitstream &= ~(0x100 << j);
403                                 bitbuf = (bitbuf & (((2 << j) << numbit) - 1)) |
404                                         ((bitbuf & ~(((2 << j) << numbit) - 1)) << 1);
405                                 numbit++;
406                                 notbitstream = ~bitstream;
407                         }
408                 numbit += 8;
409                 while (numbit >= 8) {
410                         *wp++ = bitbuf;
411                         bitbuf >>= 8;
412                         numbit -= 8;
413                 }
414         }
415         bitbuf |= 0x7e7e << numbit;
416         numbit += 16;
417         while (numbit >= 8) {
418                 *wp++ = bitbuf;
419                 bitbuf >>= 8;
420                 numbit -= 8;
421         }
422         bc->hdlctx.bufptr = bc->hdlctx.buf;
423         bc->hdlctx.bufcnt = wp - bc->hdlctx.buf;
424         dev_kfree_skb(skb);
425         bc->dev->stats.tx_packets++;
426 }
427
428 /* ---------------------------------------------------------------------- */
429
430 static int transmit(struct baycom_state *bc, int cnt, unsigned char stat)
431 {
432         struct parport *pp = bc->pdev->port;
433         unsigned char tmp[128];
434         int i, j;
435
436         if (bc->hdlctx.state == tx_tail && !(stat & EPP_PTTBIT))
437                 bc->hdlctx.state = tx_idle;
438         if (bc->hdlctx.state == tx_idle && bc->hdlctx.calibrate <= 0) {
439                 if (bc->hdlctx.bufcnt <= 0)
440                         encode_hdlc(bc);
441                 if (bc->hdlctx.bufcnt <= 0)
442                         return 0;
443                 if (!bc->ch_params.fulldup) {
444                         if (!(stat & EPP_DCDBIT)) {
445                                 bc->hdlctx.slotcnt = bc->ch_params.slottime;
446                                 return 0;
447                         }
448                         if ((--bc->hdlctx.slotcnt) > 0)
449                                 return 0;
450                         bc->hdlctx.slotcnt = bc->ch_params.slottime;
451                         if ((random32() % 256) > bc->ch_params.ppersist)
452                                 return 0;
453                 }
454         }
455         if (bc->hdlctx.state == tx_idle && bc->hdlctx.bufcnt > 0) {
456                 bc->hdlctx.state = tx_keyup;
457                 bc->hdlctx.flags = tenms_to_flags(bc, bc->ch_params.tx_delay);
458                 bc->ptt_keyed++;
459         }
460         while (cnt > 0) {
461                 switch (bc->hdlctx.state) {
462                 case tx_keyup:
463                         i = min_t(int, cnt, bc->hdlctx.flags);
464                         cnt -= i;
465                         bc->hdlctx.flags -= i;
466                         if (bc->hdlctx.flags <= 0)
467                                 bc->hdlctx.state = tx_data;
468                         memset(tmp, 0x7e, sizeof(tmp));
469                         while (i > 0) {
470                                 j = (i > sizeof(tmp)) ? sizeof(tmp) : i;
471                                 if (j != pp->ops->epp_write_data(pp, tmp, j, 0))
472                                         return -1;
473                                 i -= j;
474                         }
475                         break;
476
477                 case tx_data:
478                         if (bc->hdlctx.bufcnt <= 0) {
479                                 encode_hdlc(bc);
480                                 if (bc->hdlctx.bufcnt <= 0) {
481                                         bc->hdlctx.state = tx_tail;
482                                         bc->hdlctx.flags = tenms_to_flags(bc, bc->ch_params.tx_tail);
483                                         break;
484                                 }
485                         }
486                         i = min_t(int, cnt, bc->hdlctx.bufcnt);
487                         bc->hdlctx.bufcnt -= i;
488                         cnt -= i;
489                         if (i != pp->ops->epp_write_data(pp, bc->hdlctx.bufptr, i, 0))
490                                         return -1;
491                         bc->hdlctx.bufptr += i;
492                         break;
493                         
494                 case tx_tail:
495                         encode_hdlc(bc);
496                         if (bc->hdlctx.bufcnt > 0) {
497                                 bc->hdlctx.state = tx_data;
498                                 break;
499                         }
500                         i = min_t(int, cnt, bc->hdlctx.flags);
501                         if (i) {
502                                 cnt -= i;
503                                 bc->hdlctx.flags -= i;
504                                 memset(tmp, 0x7e, sizeof(tmp));
505                                 while (i > 0) {
506                                         j = (i > sizeof(tmp)) ? sizeof(tmp) : i;
507                                         if (j != pp->ops->epp_write_data(pp, tmp, j, 0))
508                                                 return -1;
509                                         i -= j;
510                                 }
511                                 break;
512                         }
513
514                 default:  /* fall through */
515                         if (bc->hdlctx.calibrate <= 0)
516                                 return 0;
517                         i = min_t(int, cnt, bc->hdlctx.calibrate);
518                         cnt -= i;
519                         bc->hdlctx.calibrate -= i;
520                         memset(tmp, 0, sizeof(tmp));
521                         while (i > 0) {
522                                 j = (i > sizeof(tmp)) ? sizeof(tmp) : i;
523                                 if (j != pp->ops->epp_write_data(pp, tmp, j, 0))
524                                         return -1;
525                                 i -= j;
526                         }
527                         break;
528                 }
529         }
530         return 0;
531 }
532
533 /* ---------------------------------------------------------------------- */
534
535 static void do_rxpacket(struct net_device *dev)
536 {
537         struct baycom_state *bc = netdev_priv(dev);
538         struct sk_buff *skb;
539         unsigned char *cp;
540         unsigned pktlen;
541
542         if (bc->hdlcrx.bufcnt < 4) 
543                 return;
544         if (!check_crc_ccitt(bc->hdlcrx.buf, bc->hdlcrx.bufcnt)) 
545                 return;
546         pktlen = bc->hdlcrx.bufcnt-2+1; /* KISS kludge */
547         if (!(skb = dev_alloc_skb(pktlen))) {
548                 printk("%s: memory squeeze, dropping packet\n", dev->name);
549                 dev->stats.rx_dropped++;
550                 return;
551         }
552         cp = skb_put(skb, pktlen);
553         *cp++ = 0; /* KISS kludge */
554         memcpy(cp, bc->hdlcrx.buf, pktlen - 1);
555         skb->protocol = ax25_type_trans(skb, dev);
556         netif_rx(skb);
557         dev->stats.rx_packets++;
558 }
559
560 static int receive(struct net_device *dev, int cnt)
561 {
562         struct baycom_state *bc = netdev_priv(dev);
563         struct parport *pp = bc->pdev->port;
564         unsigned int bitbuf, notbitstream, bitstream, numbits, state;
565         unsigned char tmp[128];
566         unsigned char *cp;
567         int cnt2, ret = 0;
568         int j;
569         
570         numbits = bc->hdlcrx.numbits;
571         state = bc->hdlcrx.state;
572         bitstream = bc->hdlcrx.bitstream;
573         bitbuf = bc->hdlcrx.bitbuf;
574         while (cnt > 0) {
575                 cnt2 = (cnt > sizeof(tmp)) ? sizeof(tmp) : cnt;
576                 cnt -= cnt2;
577                 if (cnt2 != pp->ops->epp_read_data(pp, tmp, cnt2, 0)) {
578                         ret = -1;
579                         break;
580                 }
581                 cp = tmp;
582                 for (; cnt2 > 0; cnt2--, cp++) {
583                         bitstream >>= 8;
584                         bitstream |= (*cp) << 8;
585                         bitbuf >>= 8;
586                         bitbuf |= (*cp) << 8;
587                         numbits += 8;
588                         notbitstream = ~bitstream;
589                         for (j = 0; j < 8; j++) {
590
591                                 /* flag or abort */
592                                 if (unlikely(!(notbitstream & (0x0fc << j)))) {
593
594                                         /* abort received */
595                                         if (!(notbitstream & (0x1fc << j)))
596                                                 state = 0;
597
598                                         /* not flag received */
599                                         else if (!(bitstream & (0x1fe << j)) != (0x0fc << j)) {
600                                                 if (state)
601                                                         do_rxpacket(dev);
602                                                 bc->hdlcrx.bufcnt = 0;
603                                                 bc->hdlcrx.bufptr = bc->hdlcrx.buf;
604                                                 state = 1;
605                                                 numbits = 7-j;
606                                                 }
607                                         }
608
609                                 /* stuffed bit */
610                                 else if (unlikely((bitstream & (0x1f8 << j)) == (0xf8 << j))) {
611                                         numbits--;
612                                         bitbuf = (bitbuf & ((~0xff) << j)) | ((bitbuf & ~((~0xff) << j)) << 1);
613                                         }
614                                 }
615                         while (state && numbits >= 8) {
616                                 if (bc->hdlcrx.bufcnt >= TXBUFFER_SIZE) {
617                                         state = 0;
618                                 } else {
619                                         *(bc->hdlcrx.bufptr)++ = bitbuf >> (16-numbits);
620                                         bc->hdlcrx.bufcnt++;
621                                         numbits -= 8;
622                                 }
623                         }
624                 }
625         }
626         bc->hdlcrx.numbits = numbits;
627         bc->hdlcrx.state = state;
628         bc->hdlcrx.bitstream = bitstream;
629         bc->hdlcrx.bitbuf = bitbuf;
630         return ret;
631 }
632
633 /* --------------------------------------------------------------------- */
634
635 #ifdef __i386__
636 #include <asm/msr.h>
637 #define GETTICK(x)                                                \
638 ({                                                                \
639         if (cpu_has_tsc)                                          \
640                 rdtscl(x);                                        \
641 })
642 #else /* __i386__ */
643 #define GETTICK(x)
644 #endif /* __i386__ */
645
646 static void epp_bh(struct work_struct *work)
647 {
648         struct net_device *dev;
649         struct baycom_state *bc;
650         struct parport *pp;
651         unsigned char stat;
652         unsigned char tmp[2];
653         unsigned int time1 = 0, time2 = 0, time3 = 0;
654         int cnt, cnt2;
655
656         bc = container_of(work, struct baycom_state, run_work.work);
657         dev = bc->dev;
658         if (!bc->work_running)
659                 return;
660         baycom_int_freq(bc);
661         pp = bc->pdev->port;
662         /* update status */
663         if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
664                 goto epptimeout;
665         bc->stat = stat;
666         bc->debug_vals.last_pllcorr = stat;
667         GETTICK(time1);
668         if (bc->modem == EPP_FPGAEXTSTATUS) {
669                 /* get input count */
670                 tmp[0] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE|1;
671                 if (pp->ops->epp_write_addr(pp, tmp, 1, 0) != 1)
672                         goto epptimeout;
673                 if (pp->ops->epp_read_addr(pp, tmp, 2, 0) != 2)
674                         goto epptimeout;
675                 cnt = tmp[0] | (tmp[1] << 8);
676                 cnt &= 0x7fff;
677                 /* get output count */
678                 tmp[0] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE|2;
679                 if (pp->ops->epp_write_addr(pp, tmp, 1, 0) != 1)
680                         goto epptimeout;
681                 if (pp->ops->epp_read_addr(pp, tmp, 2, 0) != 2)
682                         goto epptimeout;
683                 cnt2 = tmp[0] | (tmp[1] << 8);
684                 cnt2 = 16384 - (cnt2 & 0x7fff);
685                 /* return to normal */
686                 tmp[0] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE;
687                 if (pp->ops->epp_write_addr(pp, tmp, 1, 0) != 1)
688                         goto epptimeout;
689                 if (transmit(bc, cnt2, stat))
690                         goto epptimeout;
691                 GETTICK(time2);
692                 if (receive(dev, cnt))
693                         goto epptimeout;
694                 if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
695                         goto epptimeout;
696                 bc->stat = stat;
697         } else {
698                 /* try to tx */
699                 switch (stat & (EPP_NTAEF|EPP_NTHF)) {
700                 case EPP_NTHF:
701                         cnt = 2048 - 256;
702                         break;
703                 
704                 case EPP_NTAEF:
705                         cnt = 2048 - 1793;
706                         break;
707                 
708                 case 0:
709                         cnt = 0;
710                         break;
711                 
712                 default:
713                         cnt = 2048 - 1025;
714                         break;
715                 }
716                 if (transmit(bc, cnt, stat))
717                         goto epptimeout;
718                 GETTICK(time2);
719                 /* do receiver */
720                 while ((stat & (EPP_NRAEF|EPP_NRHF)) != EPP_NRHF) {
721                         switch (stat & (EPP_NRAEF|EPP_NRHF)) {
722                         case EPP_NRAEF:
723                                 cnt = 1025;
724                                 break;
725
726                         case 0:
727                                 cnt = 1793;
728                                 break;
729
730                         default:
731                                 cnt = 256;
732                                 break;
733                         }
734                         if (receive(dev, cnt))
735                                 goto epptimeout;
736                         if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
737                                 goto epptimeout;
738                 }
739                 cnt = 0;
740                 if (bc->bitrate < 50000)
741                         cnt = 256;
742                 else if (bc->bitrate < 100000)
743                         cnt = 128;
744                 while (cnt > 0 && stat & EPP_NREF) {
745                         if (receive(dev, 1))
746                                 goto epptimeout;
747                         cnt--;
748                         if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
749                                 goto epptimeout;
750                 }
751         }
752         GETTICK(time3);
753 #ifdef BAYCOM_DEBUG
754         bc->debug_vals.mod_cycles = time2 - time1;
755         bc->debug_vals.demod_cycles = time3 - time2;
756 #endif /* BAYCOM_DEBUG */
757         schedule_delayed_work(&bc->run_work, 1);
758         if (!bc->skb)
759                 netif_wake_queue(dev);
760         return;
761  epptimeout:
762         printk(KERN_ERR "%s: EPP timeout!\n", bc_drvname);
763 }
764
765 /* ---------------------------------------------------------------------- */
766 /*
767  * ===================== network driver interface =========================
768  */
769
770 static int baycom_send_packet(struct sk_buff *skb, struct net_device *dev)
771 {
772         struct baycom_state *bc = netdev_priv(dev);
773
774         if (skb->data[0] != 0) {
775                 do_kiss_params(bc, skb->data, skb->len);
776                 dev_kfree_skb(skb);
777                 return 0;
778         }
779         if (bc->skb)
780                 return -1;
781         /* strip KISS byte */
782         if (skb->len >= HDLCDRV_MAXFLEN+1 || skb->len < 3) {
783                 dev_kfree_skb(skb);
784                 return 0;
785         }
786         netif_stop_queue(dev);
787         bc->skb = skb;
788         return 0;
789 }
790
791 /* --------------------------------------------------------------------- */
792
793 static int baycom_set_mac_address(struct net_device *dev, void *addr)
794 {
795         struct sockaddr *sa = (struct sockaddr *)addr;
796
797         /* addr is an AX.25 shifted ASCII mac address */
798         memcpy(dev->dev_addr, sa->sa_data, dev->addr_len); 
799         return 0;                                         
800 }
801
802 /* --------------------------------------------------------------------- */
803
804 static void epp_wakeup(void *handle)
805 {
806         struct net_device *dev = (struct net_device *)handle;
807         struct baycom_state *bc = netdev_priv(dev);
808
809         printk(KERN_DEBUG "baycom_epp: %s: why am I being woken up?\n", dev->name);
810         if (!parport_claim(bc->pdev))
811                 printk(KERN_DEBUG "baycom_epp: %s: I'm broken.\n", dev->name);
812 }
813
814 /* --------------------------------------------------------------------- */
815
816 /*
817  * Open/initialize the board. This is called (in the current kernel)
818  * sometime after booting when the 'ifconfig' program is run.
819  *
820  * This routine should set everything up anew at each open, even
821  * registers that "should" only need to be set once at boot, so that
822  * there is non-reboot way to recover if something goes wrong.
823  */
824
825 static int epp_open(struct net_device *dev)
826 {
827         struct baycom_state *bc = netdev_priv(dev);
828         struct parport *pp = parport_find_base(dev->base_addr);
829         unsigned int i, j;
830         unsigned char tmp[128];
831         unsigned char stat;
832         unsigned long tstart;
833         
834         if (!pp) {
835                 printk(KERN_ERR "%s: parport at 0x%lx unknown\n", bc_drvname, dev->base_addr);
836                 return -ENXIO;
837         }
838 #if 0
839         if (pp->irq < 0) {
840                 printk(KERN_ERR "%s: parport at 0x%lx has no irq\n", bc_drvname, pp->base);
841                 parport_put_port(pp);
842                 return -ENXIO;
843         }
844 #endif
845         if ((~pp->modes) & (PARPORT_MODE_TRISTATE | PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT)) {
846                 printk(KERN_ERR "%s: parport at 0x%lx cannot be used\n",
847                        bc_drvname, pp->base);
848                 parport_put_port(pp);
849                 return -EIO;
850         }
851         memset(&bc->modem, 0, sizeof(bc->modem));
852         bc->pdev = parport_register_device(pp, dev->name, NULL, epp_wakeup, 
853                                            NULL, PARPORT_DEV_EXCL, dev);
854         parport_put_port(pp);
855         if (!bc->pdev) {
856                 printk(KERN_ERR "%s: cannot register parport at 0x%lx\n", bc_drvname, pp->base);
857                 return -ENXIO;
858         }
859         if (parport_claim(bc->pdev)) {
860                 printk(KERN_ERR "%s: parport at 0x%lx busy\n", bc_drvname, pp->base);
861                 parport_unregister_device(bc->pdev);
862                 return -EBUSY;
863         }
864         dev->irq = /*pp->irq*/ 0;
865         INIT_DELAYED_WORK(&bc->run_work, epp_bh);
866         bc->work_running = 1;
867         bc->modem = EPP_CONVENTIONAL;
868         if (eppconfig(bc))
869                 printk(KERN_INFO "%s: no FPGA detected, assuming conventional EPP modem\n", bc_drvname);
870         else
871                 bc->modem = /*EPP_FPGA*/ EPP_FPGAEXTSTATUS;
872         parport_write_control(pp, LPTCTRL_PROGRAM); /* prepare EPP mode; we aren't using interrupts */
873         /* reset the modem */
874         tmp[0] = 0;
875         tmp[1] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE;
876         if (pp->ops->epp_write_addr(pp, tmp, 2, 0) != 2)
877                 goto epptimeout;
878         /* autoprobe baud rate */
879         tstart = jiffies;
880         i = 0;
881         while (time_before(jiffies, tstart + HZ/3)) {
882                 if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
883                         goto epptimeout;
884                 if ((stat & (EPP_NRAEF|EPP_NRHF)) == EPP_NRHF) {
885                         schedule();
886                         continue;
887                 }
888                 if (pp->ops->epp_read_data(pp, tmp, 128, 0) != 128)
889                         goto epptimeout;
890                 if (pp->ops->epp_read_data(pp, tmp, 128, 0) != 128)
891                         goto epptimeout;
892                 i += 256;
893         }
894         for (j = 0; j < 256; j++) {
895                 if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
896                         goto epptimeout;
897                 if (!(stat & EPP_NREF))
898                         break;
899                 if (pp->ops->epp_read_data(pp, tmp, 1, 0) != 1)
900                         goto epptimeout;
901                 i++;
902         }
903         tstart = jiffies - tstart;
904         bc->bitrate = i * (8 * HZ) / tstart;
905         j = 1;
906         i = bc->bitrate >> 3;
907         while (j < 7 && i > 150) {
908                 j++;
909                 i >>= 1;
910         }
911         printk(KERN_INFO "%s: autoprobed bitrate: %d  int divider: %d  int rate: %d\n", 
912                bc_drvname, bc->bitrate, j, bc->bitrate >> (j+2));
913         tmp[0] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE/*|j*/;
914         if (pp->ops->epp_write_addr(pp, tmp, 1, 0) != 1)
915                 goto epptimeout;
916         /*
917          * initialise hdlc variables
918          */
919         bc->hdlcrx.state = 0;
920         bc->hdlcrx.numbits = 0;
921         bc->hdlctx.state = tx_idle;
922         bc->hdlctx.bufcnt = 0;
923         bc->hdlctx.slotcnt = bc->ch_params.slottime;
924         bc->hdlctx.calibrate = 0;
925         /* start the bottom half stuff */
926         schedule_delayed_work(&bc->run_work, 1);
927         netif_start_queue(dev);
928         return 0;
929
930  epptimeout:
931         printk(KERN_ERR "%s: epp timeout during bitrate probe\n", bc_drvname);
932         parport_write_control(pp, 0); /* reset the adapter */
933         parport_release(bc->pdev);
934         parport_unregister_device(bc->pdev);
935         return -EIO;
936 }
937
938 /* --------------------------------------------------------------------- */
939
940 static int epp_close(struct net_device *dev)
941 {
942         struct baycom_state *bc = netdev_priv(dev);
943         struct parport *pp = bc->pdev->port;
944         unsigned char tmp[1];
945
946         bc->work_running = 0;
947         cancel_delayed_work_sync(&bc->run_work);
948         bc->stat = EPP_DCDBIT;
949         tmp[0] = 0;
950         pp->ops->epp_write_addr(pp, tmp, 1, 0);
951         parport_write_control(pp, 0); /* reset the adapter */
952         parport_release(bc->pdev);
953         parport_unregister_device(bc->pdev);
954         if (bc->skb)
955                 dev_kfree_skb(bc->skb);
956         bc->skb = NULL;
957         printk(KERN_INFO "%s: close epp at iobase 0x%lx irq %u\n",
958                bc_drvname, dev->base_addr, dev->irq);
959         return 0;
960 }
961
962 /* --------------------------------------------------------------------- */
963
964 static int baycom_setmode(struct baycom_state *bc, const char *modestr)
965 {
966         const char *cp;
967
968         if (strstr(modestr,"intclk"))
969                 bc->cfg.intclk = 1;
970         if (strstr(modestr,"extclk"))
971                 bc->cfg.intclk = 0;
972         if (strstr(modestr,"intmodem"))
973                 bc->cfg.extmodem = 0;
974         if (strstr(modestr,"extmodem"))
975                 bc->cfg.extmodem = 1;
976         if (strstr(modestr,"noloopback"))
977                 bc->cfg.loopback = 0;
978         if (strstr(modestr,"loopback"))
979                 bc->cfg.loopback = 1;
980         if ((cp = strstr(modestr,"fclk="))) {
981                 bc->cfg.fclk = simple_strtoul(cp+5, NULL, 0);
982                 if (bc->cfg.fclk < 1000000)
983                         bc->cfg.fclk = 1000000;
984                 if (bc->cfg.fclk > 25000000)
985                         bc->cfg.fclk = 25000000;
986         }
987         if ((cp = strstr(modestr,"bps="))) {
988                 bc->cfg.bps = simple_strtoul(cp+4, NULL, 0);
989                 if (bc->cfg.bps < 1000)
990                         bc->cfg.bps = 1000;
991                 if (bc->cfg.bps > 1500000)
992                         bc->cfg.bps = 1500000;
993         }
994         return 0;
995 }
996
997 /* --------------------------------------------------------------------- */
998
999 static int baycom_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
1000 {
1001         struct baycom_state *bc = netdev_priv(dev);
1002         struct hdlcdrv_ioctl hi;
1003
1004         if (cmd != SIOCDEVPRIVATE)
1005                 return -ENOIOCTLCMD;
1006
1007         if (copy_from_user(&hi, ifr->ifr_data, sizeof(hi)))
1008                 return -EFAULT;
1009         switch (hi.cmd) {
1010         default:
1011                 return -ENOIOCTLCMD;
1012
1013         case HDLCDRVCTL_GETCHANNELPAR:
1014                 hi.data.cp.tx_delay = bc->ch_params.tx_delay;
1015                 hi.data.cp.tx_tail = bc->ch_params.tx_tail;
1016                 hi.data.cp.slottime = bc->ch_params.slottime;
1017                 hi.data.cp.ppersist = bc->ch_params.ppersist;
1018                 hi.data.cp.fulldup = bc->ch_params.fulldup;
1019                 break;
1020
1021         case HDLCDRVCTL_SETCHANNELPAR:
1022                 if (!capable(CAP_NET_ADMIN))
1023                         return -EACCES;
1024                 bc->ch_params.tx_delay = hi.data.cp.tx_delay;
1025                 bc->ch_params.tx_tail = hi.data.cp.tx_tail;
1026                 bc->ch_params.slottime = hi.data.cp.slottime;
1027                 bc->ch_params.ppersist = hi.data.cp.ppersist;
1028                 bc->ch_params.fulldup = hi.data.cp.fulldup;
1029                 bc->hdlctx.slotcnt = 1;
1030                 return 0;
1031                 
1032         case HDLCDRVCTL_GETMODEMPAR:
1033                 hi.data.mp.iobase = dev->base_addr;
1034                 hi.data.mp.irq = dev->irq;
1035                 hi.data.mp.dma = dev->dma;
1036                 hi.data.mp.dma2 = 0;
1037                 hi.data.mp.seriobase = 0;
1038                 hi.data.mp.pariobase = 0;
1039                 hi.data.mp.midiiobase = 0;
1040                 break;
1041
1042         case HDLCDRVCTL_SETMODEMPAR:
1043                 if ((!capable(CAP_SYS_RAWIO)) || netif_running(dev))
1044                         return -EACCES;
1045                 dev->base_addr = hi.data.mp.iobase;
1046                 dev->irq = /*hi.data.mp.irq*/0;
1047                 dev->dma = /*hi.data.mp.dma*/0;
1048                 return 0;       
1049                 
1050         case HDLCDRVCTL_GETSTAT:
1051                 hi.data.cs.ptt = !!(bc->stat & EPP_PTTBIT);
1052                 hi.data.cs.dcd = !(bc->stat & EPP_DCDBIT);
1053                 hi.data.cs.ptt_keyed = bc->ptt_keyed;
1054                 hi.data.cs.tx_packets = dev->stats.tx_packets;
1055                 hi.data.cs.tx_errors = dev->stats.tx_errors;
1056                 hi.data.cs.rx_packets = dev->stats.rx_packets;
1057                 hi.data.cs.rx_errors = dev->stats.rx_errors;
1058                 break;          
1059
1060         case HDLCDRVCTL_OLDGETSTAT:
1061                 hi.data.ocs.ptt = !!(bc->stat & EPP_PTTBIT);
1062                 hi.data.ocs.dcd = !(bc->stat & EPP_DCDBIT);
1063                 hi.data.ocs.ptt_keyed = bc->ptt_keyed;
1064                 break;          
1065
1066         case HDLCDRVCTL_CALIBRATE:
1067                 if (!capable(CAP_SYS_RAWIO))
1068                         return -EACCES;
1069                 bc->hdlctx.calibrate = hi.data.calibrate * bc->bitrate / 8;
1070                 return 0;
1071
1072         case HDLCDRVCTL_DRIVERNAME:
1073                 strncpy(hi.data.drivername, "baycom_epp", sizeof(hi.data.drivername));
1074                 break;
1075                 
1076         case HDLCDRVCTL_GETMODE:
1077                 sprintf(hi.data.modename, "%sclk,%smodem,fclk=%d,bps=%d%s", 
1078                         bc->cfg.intclk ? "int" : "ext",
1079                         bc->cfg.extmodem ? "ext" : "int", bc->cfg.fclk, bc->cfg.bps,
1080                         bc->cfg.loopback ? ",loopback" : "");
1081                 break;
1082
1083         case HDLCDRVCTL_SETMODE:
1084                 if (!capable(CAP_NET_ADMIN) || netif_running(dev))
1085                         return -EACCES;
1086                 hi.data.modename[sizeof(hi.data.modename)-1] = '\0';
1087                 return baycom_setmode(bc, hi.data.modename);
1088
1089         case HDLCDRVCTL_MODELIST:
1090                 strncpy(hi.data.modename, "intclk,extclk,intmodem,extmodem,divider=x",
1091                         sizeof(hi.data.modename));
1092                 break;
1093
1094         case HDLCDRVCTL_MODEMPARMASK:
1095                 return HDLCDRV_PARMASK_IOBASE;
1096
1097         }
1098         if (copy_to_user(ifr->ifr_data, &hi, sizeof(hi)))
1099                 return -EFAULT;
1100         return 0;
1101 }
1102
1103 /* --------------------------------------------------------------------- */
1104
1105 static const struct net_device_ops baycom_netdev_ops = {
1106         .ndo_open            = epp_open,
1107         .ndo_stop            = epp_close,
1108         .ndo_do_ioctl        = baycom_ioctl,
1109         .ndo_start_xmit      = baycom_send_packet,
1110         .ndo_set_mac_address = baycom_set_mac_address,
1111 };
1112
1113 /*
1114  * Check for a network adaptor of this type, and return '0' if one exists.
1115  * If dev->base_addr == 0, probe all likely locations.
1116  * If dev->base_addr == 1, always return failure.
1117  * If dev->base_addr == 2, allocate space for the device and return success
1118  * (detachable devices only).
1119  */
1120 static void baycom_probe(struct net_device *dev)
1121 {
1122         const struct hdlcdrv_channel_params dflt_ch_params = { 
1123                 20, 2, 10, 40, 0 
1124         };
1125         struct baycom_state *bc;
1126
1127         /*
1128          * not a real probe! only initialize data structures
1129          */
1130         bc = netdev_priv(dev);
1131         /*
1132          * initialize the baycom_state struct
1133          */
1134         bc->ch_params = dflt_ch_params;
1135         bc->ptt_keyed = 0;
1136
1137         /*
1138          * initialize the device struct
1139          */
1140
1141         /* Fill in the fields of the device structure */
1142         bc->skb = NULL;
1143         
1144         dev->netdev_ops = &baycom_netdev_ops;
1145         dev->header_ops = &ax25_header_ops;
1146         
1147         dev->type = ARPHRD_AX25;           /* AF_AX25 device */
1148         dev->hard_header_len = AX25_MAX_HEADER_LEN + AX25_BPQ_HEADER_LEN;
1149         dev->mtu = AX25_DEF_PACLEN;        /* eth_mtu is the default */
1150         dev->addr_len = AX25_ADDR_LEN;     /* sizeof an ax.25 address */
1151         memcpy(dev->broadcast, &ax25_bcast, AX25_ADDR_LEN);
1152         memcpy(dev->dev_addr, &null_ax25_address, AX25_ADDR_LEN);
1153         dev->tx_queue_len = 16;
1154
1155         /* New style flags */
1156         dev->flags = 0;
1157 }
1158
1159 /* --------------------------------------------------------------------- */
1160
1161 /*
1162  * command line settable parameters
1163  */
1164 static const char *mode[NR_PORTS] = { "", };
1165 static int iobase[NR_PORTS] = { 0x378, };
1166
1167 module_param_array(mode, charp, NULL, 0);
1168 MODULE_PARM_DESC(mode, "baycom operating mode");
1169 module_param_array(iobase, int, NULL, 0);
1170 MODULE_PARM_DESC(iobase, "baycom io base address");
1171
1172 MODULE_AUTHOR("Thomas M. Sailer, sailer@ife.ee.ethz.ch, hb9jnx@hb9w.che.eu");
1173 MODULE_DESCRIPTION("Baycom epp amateur radio modem driver");
1174 MODULE_LICENSE("GPL");
1175
1176 /* --------------------------------------------------------------------- */
1177
1178 static void __init baycom_epp_dev_setup(struct net_device *dev)
1179 {
1180         struct baycom_state *bc = netdev_priv(dev);
1181
1182         /*
1183          * initialize part of the baycom_state struct
1184          */
1185         bc->dev = dev;
1186         bc->magic = BAYCOM_MAGIC;
1187         bc->cfg.fclk = 19666600;
1188         bc->cfg.bps = 9600;
1189         /*
1190          * initialize part of the device struct
1191          */
1192         baycom_probe(dev);
1193 }
1194
1195 static int __init init_baycomepp(void)
1196 {
1197         int i, found = 0;
1198         char set_hw = 1;
1199
1200         printk(bc_drvinfo);
1201         /*
1202          * register net devices
1203          */
1204         for (i = 0; i < NR_PORTS; i++) {
1205                 struct net_device *dev;
1206                 
1207                 dev = alloc_netdev(sizeof(struct baycom_state), "bce%d",
1208                                    baycom_epp_dev_setup);
1209
1210                 if (!dev) {
1211                         printk(KERN_WARNING "bce%d : out of memory\n", i);
1212                         return found ? 0 : -ENOMEM;
1213                 }
1214                         
1215                 sprintf(dev->name, "bce%d", i);
1216                 dev->base_addr = iobase[i];
1217
1218                 if (!mode[i])
1219                         set_hw = 0;
1220                 if (!set_hw)
1221                         iobase[i] = 0;
1222
1223                 if (register_netdev(dev)) {
1224                         printk(KERN_WARNING "%s: cannot register net device %s\n", bc_drvname, dev->name);
1225                         free_netdev(dev);
1226                         break;
1227                 }
1228                 if (set_hw && baycom_setmode(netdev_priv(dev), mode[i]))
1229                         set_hw = 0;
1230                 baycom_device[i] = dev;
1231                 found++;
1232         }
1233
1234         return found ? 0 : -ENXIO;
1235 }
1236
1237 static void __exit cleanup_baycomepp(void)
1238 {
1239         int i;
1240
1241         for(i = 0; i < NR_PORTS; i++) {
1242                 struct net_device *dev = baycom_device[i];
1243
1244                 if (dev) {
1245                         struct baycom_state *bc = netdev_priv(dev);
1246                         if (bc->magic == BAYCOM_MAGIC) {
1247                                 unregister_netdev(dev);
1248                                 free_netdev(dev);
1249                         } else
1250                                 printk(paranoia_str, "cleanup_module");
1251                 }
1252         }
1253 }
1254
1255 module_init(init_baycomepp);
1256 module_exit(cleanup_baycomepp);
1257
1258 /* --------------------------------------------------------------------- */
1259
1260 #ifndef MODULE
1261
1262 /*
1263  * format: baycom_epp=io,mode
1264  * mode: fpga config options
1265  */
1266
1267 static int __init baycom_epp_setup(char *str)
1268 {
1269         static unsigned __initdata nr_dev = 0;
1270         int ints[2];
1271
1272         if (nr_dev >= NR_PORTS)
1273                 return 0;
1274         str = get_options(str, 2, ints);
1275         if (ints[0] < 1)
1276                 return 0;
1277         mode[nr_dev] = str;
1278         iobase[nr_dev] = ints[1];
1279         nr_dev++;
1280         return 1;
1281 }
1282
1283 __setup("baycom_epp=", baycom_epp_setup);
1284
1285 #endif /* MODULE */
1286 /* --------------------------------------------------------------------- */