Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy...
[linux-2.6] / drivers / serial / sunsab.c
1 /* sunsab.c: ASYNC Driver for the SIEMENS SAB82532 DUSCC.
2  *
3  * Copyright (C) 1997  Eddie C. Dost  (ecd@skynet.be)
4  * Copyright (C) 2002  David S. Miller (davem@redhat.com)
5  *
6  * Rewrote buffer handling to use CIRC(Circular Buffer) macros.
7  *   Maxim Krasnyanskiy <maxk@qualcomm.com>
8  *
9  * Fixed to use tty_get_baud_rate, and to allow for arbitrary baud
10  * rates to be programmed into the UART.  Also eliminated a lot of
11  * duplicated code in the console setup.
12  *   Theodore Ts'o <tytso@mit.edu>, 2001-Oct-12
13  *
14  * Ported to new 2.5.x UART layer.
15  *   David S. Miller <davem@redhat.com>
16  */
17
18 #include <linux/config.h>
19 #include <linux/module.h>
20 #include <linux/kernel.h>
21 #include <linux/sched.h>
22 #include <linux/errno.h>
23 #include <linux/tty.h>
24 #include <linux/tty_flip.h>
25 #include <linux/major.h>
26 #include <linux/string.h>
27 #include <linux/ptrace.h>
28 #include <linux/ioport.h>
29 #include <linux/circ_buf.h>
30 #include <linux/serial.h>
31 #include <linux/sysrq.h>
32 #include <linux/console.h>
33 #include <linux/spinlock.h>
34 #include <linux/slab.h>
35 #include <linux/delay.h>
36 #include <linux/init.h>
37
38 #include <asm/io.h>
39 #include <asm/irq.h>
40 #include <asm/oplib.h>
41 #include <asm/ebus.h>
42
43 #if defined(CONFIG_SERIAL_SUNZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
44 #define SUPPORT_SYSRQ
45 #endif
46
47 #include <linux/serial_core.h>
48
49 #include "suncore.h"
50 #include "sunsab.h"
51
52 struct uart_sunsab_port {
53         struct uart_port                port;           /* Generic UART port    */
54         union sab82532_async_regs       __iomem *regs;  /* Chip registers       */
55         unsigned long                   irqflags;       /* IRQ state flags      */
56         int                             dsr;            /* Current DSR state    */
57         unsigned int                    cec_timeout;    /* Chip poll timeout... */
58         unsigned int                    tec_timeout;    /* likewise             */
59         unsigned char                   interrupt_mask0;/* ISR0 masking         */
60         unsigned char                   interrupt_mask1;/* ISR1 masking         */
61         unsigned char                   pvr_dtr_bit;    /* Which PVR bit is DTR */
62         unsigned char                   pvr_dsr_bit;    /* Which PVR bit is DSR */
63         int                             type;           /* SAB82532 version     */
64
65         /* Setting configuration bits while the transmitter is active
66          * can cause garbage characters to get emitted by the chip.
67          * Therefore, we cache such writes here and do the real register
68          * write the next time the transmitter becomes idle.
69          */
70         unsigned int                    cached_ebrg;
71         unsigned char                   cached_mode;
72         unsigned char                   cached_pvr;
73         unsigned char                   cached_dafo;
74 };
75
76 /*
77  * This assumes you have a 29.4912 MHz clock for your UART.
78  */
79 #define SAB_BASE_BAUD ( 29491200 / 16 )
80
81 static char *sab82532_version[16] = {
82         "V1.0", "V2.0", "V3.2", "V(0x03)",
83         "V(0x04)", "V(0x05)", "V(0x06)", "V(0x07)",
84         "V(0x08)", "V(0x09)", "V(0x0a)", "V(0x0b)",
85         "V(0x0c)", "V(0x0d)", "V(0x0e)", "V(0x0f)"
86 };
87
88 #define SAB82532_MAX_TEC_TIMEOUT 200000 /* 1 character time (at 50 baud) */
89 #define SAB82532_MAX_CEC_TIMEOUT  50000 /* 2.5 TX CLKs (at 50 baud) */
90
91 #define SAB82532_RECV_FIFO_SIZE 32      /* Standard async fifo sizes */
92 #define SAB82532_XMIT_FIFO_SIZE 32
93
94 static __inline__ void sunsab_tec_wait(struct uart_sunsab_port *up)
95 {
96         int timeout = up->tec_timeout;
97
98         while ((readb(&up->regs->r.star) & SAB82532_STAR_TEC) && --timeout)
99                 udelay(1);
100 }
101
102 static __inline__ void sunsab_cec_wait(struct uart_sunsab_port *up)
103 {
104         int timeout = up->cec_timeout;
105
106         while ((readb(&up->regs->r.star) & SAB82532_STAR_CEC) && --timeout)
107                 udelay(1);
108 }
109
110 static struct tty_struct *
111 receive_chars(struct uart_sunsab_port *up,
112               union sab82532_irq_status *stat,
113               struct pt_regs *regs)
114 {
115         struct tty_struct *tty = NULL;
116         unsigned char buf[32];
117         int saw_console_brk = 0;
118         int free_fifo = 0;
119         int count = 0;
120         int i;
121
122         if (up->port.info != NULL)              /* Unopened serial console */
123                 tty = up->port.info->tty;
124
125         /* Read number of BYTES (Character + Status) available. */
126         if (stat->sreg.isr0 & SAB82532_ISR0_RPF) {
127                 count = SAB82532_RECV_FIFO_SIZE;
128                 free_fifo++;
129         }
130
131         if (stat->sreg.isr0 & SAB82532_ISR0_TCD) {
132                 count = readb(&up->regs->r.rbcl) & (SAB82532_RECV_FIFO_SIZE - 1);
133                 free_fifo++;
134         }
135
136         /* Issue a FIFO read command in case we where idle. */
137         if (stat->sreg.isr0 & SAB82532_ISR0_TIME) {
138                 sunsab_cec_wait(up);
139                 writeb(SAB82532_CMDR_RFRD, &up->regs->w.cmdr);
140                 return tty;
141         }
142
143         if (stat->sreg.isr0 & SAB82532_ISR0_RFO)
144                 free_fifo++;
145
146         /* Read the FIFO. */
147         for (i = 0; i < count; i++)
148                 buf[i] = readb(&up->regs->r.rfifo[i]);
149
150         /* Issue Receive Message Complete command. */
151         if (free_fifo) {
152                 sunsab_cec_wait(up);
153                 writeb(SAB82532_CMDR_RMC, &up->regs->w.cmdr);
154         }
155
156         /* Count may be zero for BRK, so we check for it here */
157         if ((stat->sreg.isr1 & SAB82532_ISR1_BRK) &&
158             (up->port.line == up->port.cons->index))
159                 saw_console_brk = 1;
160
161         for (i = 0; i < count; i++) {
162                 unsigned char ch = buf[i];
163
164                 if (tty == NULL) {
165                         uart_handle_sysrq_char(&up->port, ch, regs);
166                         continue;
167                 }
168
169                 if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) {
170                         tty->flip.work.func((void *)tty);
171                         if (tty->flip.count >= TTY_FLIPBUF_SIZE)
172                                 return tty; // if TTY_DONT_FLIP is set
173                 }
174
175                 *tty->flip.char_buf_ptr = ch;
176                 *tty->flip.flag_buf_ptr = TTY_NORMAL;
177                 up->port.icount.rx++;
178
179                 if (unlikely(stat->sreg.isr0 & (SAB82532_ISR0_PERR |
180                                                 SAB82532_ISR0_FERR |
181                                                 SAB82532_ISR0_RFO)) ||
182                     unlikely(stat->sreg.isr1 & SAB82532_ISR1_BRK)) {
183                         /*
184                          * For statistics only
185                          */
186                         if (stat->sreg.isr1 & SAB82532_ISR1_BRK) {
187                                 stat->sreg.isr0 &= ~(SAB82532_ISR0_PERR |
188                                                      SAB82532_ISR0_FERR);
189                                 up->port.icount.brk++;
190                                 /*
191                                  * We do the SysRQ and SAK checking
192                                  * here because otherwise the break
193                                  * may get masked by ignore_status_mask
194                                  * or read_status_mask.
195                                  */
196                                 if (uart_handle_break(&up->port))
197                                         continue;
198                         } else if (stat->sreg.isr0 & SAB82532_ISR0_PERR)
199                                 up->port.icount.parity++;
200                         else if (stat->sreg.isr0 & SAB82532_ISR0_FERR)
201                                 up->port.icount.frame++;
202                         if (stat->sreg.isr0 & SAB82532_ISR0_RFO)
203                                 up->port.icount.overrun++;
204
205                         /*
206                          * Mask off conditions which should be ingored.
207                          */
208                         stat->sreg.isr0 &= (up->port.read_status_mask & 0xff);
209                         stat->sreg.isr1 &= ((up->port.read_status_mask >> 8) & 0xff);
210
211                         if (stat->sreg.isr1 & SAB82532_ISR1_BRK) {
212                                 *tty->flip.flag_buf_ptr = TTY_BREAK;
213                         } else if (stat->sreg.isr0 & SAB82532_ISR0_PERR)
214                                 *tty->flip.flag_buf_ptr = TTY_PARITY;
215                         else if (stat->sreg.isr0 & SAB82532_ISR0_FERR)
216                                 *tty->flip.flag_buf_ptr = TTY_FRAME;
217                 }
218
219                 if (uart_handle_sysrq_char(&up->port, ch, regs))
220                         continue;
221
222                 if ((stat->sreg.isr0 & (up->port.ignore_status_mask & 0xff)) == 0 &&
223                     (stat->sreg.isr1 & ((up->port.ignore_status_mask >> 8) & 0xff)) == 0){
224                         tty->flip.flag_buf_ptr++;
225                         tty->flip.char_buf_ptr++;
226                         tty->flip.count++;
227                 }
228                 if ((stat->sreg.isr0 & SAB82532_ISR0_RFO) &&
229                     tty->flip.count < TTY_FLIPBUF_SIZE) {
230                         /*
231                          * Overrun is special, since it's reported
232                          * immediately, and doesn't affect the current
233                          * character.
234                          */
235                         *tty->flip.flag_buf_ptr = TTY_OVERRUN;
236                         tty->flip.flag_buf_ptr++;
237                         tty->flip.char_buf_ptr++;
238                         tty->flip.count++;
239                 }
240         }
241
242         if (saw_console_brk)
243                 sun_do_break();
244
245         return tty;
246 }
247
248 static void sunsab_stop_tx(struct uart_port *);
249 static void sunsab_tx_idle(struct uart_sunsab_port *);
250
251 static void transmit_chars(struct uart_sunsab_port *up,
252                            union sab82532_irq_status *stat)
253 {
254         struct circ_buf *xmit = &up->port.info->xmit;
255         int i;
256
257         if (stat->sreg.isr1 & SAB82532_ISR1_ALLS) {
258                 up->interrupt_mask1 |= SAB82532_IMR1_ALLS;
259                 writeb(up->interrupt_mask1, &up->regs->w.imr1);
260                 set_bit(SAB82532_ALLS, &up->irqflags);
261         }
262
263 #if 0 /* bde@nwlink.com says this check causes problems */
264         if (!(stat->sreg.isr1 & SAB82532_ISR1_XPR))
265                 return;
266 #endif
267
268         if (!(readb(&up->regs->r.star) & SAB82532_STAR_XFW))
269                 return;
270
271         set_bit(SAB82532_XPR, &up->irqflags);
272         sunsab_tx_idle(up);
273
274         if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
275                 up->interrupt_mask1 |= SAB82532_IMR1_XPR;
276                 writeb(up->interrupt_mask1, &up->regs->w.imr1);
277                 return;
278         }
279
280         up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR);
281         writeb(up->interrupt_mask1, &up->regs->w.imr1);
282         clear_bit(SAB82532_ALLS, &up->irqflags);
283
284         /* Stuff 32 bytes into Transmit FIFO. */
285         clear_bit(SAB82532_XPR, &up->irqflags);
286         for (i = 0; i < up->port.fifosize; i++) {
287                 writeb(xmit->buf[xmit->tail],
288                        &up->regs->w.xfifo[i]);
289                 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
290                 up->port.icount.tx++;
291                 if (uart_circ_empty(xmit))
292                         break;
293         }
294
295         /* Issue a Transmit Frame command. */
296         sunsab_cec_wait(up);
297         writeb(SAB82532_CMDR_XF, &up->regs->w.cmdr);
298
299         if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
300                 uart_write_wakeup(&up->port);
301
302         if (uart_circ_empty(xmit))
303                 sunsab_stop_tx(&up->port);
304 }
305
306 static void check_status(struct uart_sunsab_port *up,
307                          union sab82532_irq_status *stat)
308 {
309         if (stat->sreg.isr0 & SAB82532_ISR0_CDSC)
310                 uart_handle_dcd_change(&up->port,
311                                        !(readb(&up->regs->r.vstr) & SAB82532_VSTR_CD));
312
313         if (stat->sreg.isr1 & SAB82532_ISR1_CSC)
314                 uart_handle_cts_change(&up->port,
315                                        (readb(&up->regs->r.star) & SAB82532_STAR_CTS));
316
317         if ((readb(&up->regs->r.pvr) & up->pvr_dsr_bit) ^ up->dsr) {
318                 up->dsr = (readb(&up->regs->r.pvr) & up->pvr_dsr_bit) ? 0 : 1;
319                 up->port.icount.dsr++;
320         }
321
322         wake_up_interruptible(&up->port.info->delta_msr_wait);
323 }
324
325 static irqreturn_t sunsab_interrupt(int irq, void *dev_id, struct pt_regs *regs)
326 {
327         struct uart_sunsab_port *up = dev_id;
328         struct tty_struct *tty;
329         union sab82532_irq_status status;
330         unsigned long flags;
331
332         spin_lock_irqsave(&up->port.lock, flags);
333
334         status.stat = 0;
335         if (readb(&up->regs->r.gis) & SAB82532_GIS_ISA0)
336                 status.sreg.isr0 = readb(&up->regs->r.isr0);
337         if (readb(&up->regs->r.gis) & SAB82532_GIS_ISA1)
338                 status.sreg.isr1 = readb(&up->regs->r.isr1);
339
340         tty = NULL;
341         if (status.stat) {
342                 if ((status.sreg.isr0 & (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME |
343                                          SAB82532_ISR0_RFO | SAB82532_ISR0_RPF)) ||
344                     (status.sreg.isr1 & SAB82532_ISR1_BRK))
345                         tty = receive_chars(up, &status, regs);
346                 if ((status.sreg.isr0 & SAB82532_ISR0_CDSC) ||
347                     (status.sreg.isr1 & SAB82532_ISR1_CSC))
348                         check_status(up, &status);
349                 if (status.sreg.isr1 & (SAB82532_ISR1_ALLS | SAB82532_ISR1_XPR))
350                         transmit_chars(up, &status);
351         }
352
353         spin_unlock(&up->port.lock);
354
355         if (tty)
356                 tty_flip_buffer_push(tty);
357
358         up++;
359
360         spin_lock(&up->port.lock);
361
362         status.stat = 0;
363         if (readb(&up->regs->r.gis) & SAB82532_GIS_ISB0)
364                 status.sreg.isr0 = readb(&up->regs->r.isr0);
365         if (readb(&up->regs->r.gis) & SAB82532_GIS_ISB1)
366                 status.sreg.isr1 = readb(&up->regs->r.isr1);
367
368         tty = NULL;
369         if (status.stat) {
370                 if ((status.sreg.isr0 & (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME |
371                                          SAB82532_ISR0_RFO | SAB82532_ISR0_RPF)) ||
372                     (status.sreg.isr1 & SAB82532_ISR1_BRK))
373
374                         tty = receive_chars(up, &status, regs);
375                 if ((status.sreg.isr0 & SAB82532_ISR0_CDSC) ||
376                     (status.sreg.isr1 & (SAB82532_ISR1_BRK | SAB82532_ISR1_CSC)))
377                         check_status(up, &status);
378                 if (status.sreg.isr1 & (SAB82532_ISR1_ALLS | SAB82532_ISR1_XPR))
379                         transmit_chars(up, &status);
380         }
381
382         spin_unlock_irqrestore(&up->port.lock, flags);
383
384         if (tty)
385                 tty_flip_buffer_push(tty);
386
387         return IRQ_HANDLED;
388 }
389
390 /* port->lock is not held.  */
391 static unsigned int sunsab_tx_empty(struct uart_port *port)
392 {
393         struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
394         int ret;
395
396         /* Do not need a lock for a state test like this.  */
397         if (test_bit(SAB82532_ALLS, &up->irqflags))
398                 ret = TIOCSER_TEMT;
399         else
400                 ret = 0;
401
402         return ret;
403 }
404
405 /* port->lock held by caller.  */
406 static void sunsab_set_mctrl(struct uart_port *port, unsigned int mctrl)
407 {
408         struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
409
410         if (mctrl & TIOCM_RTS) {
411                 up->cached_mode &= ~SAB82532_MODE_FRTS;
412                 up->cached_mode |= SAB82532_MODE_RTS;
413         } else {
414                 up->cached_mode |= (SAB82532_MODE_FRTS |
415                                     SAB82532_MODE_RTS);
416         }
417         if (mctrl & TIOCM_DTR) {
418                 up->cached_pvr &= ~(up->pvr_dtr_bit);
419         } else {
420                 up->cached_pvr |= up->pvr_dtr_bit;
421         }
422
423         set_bit(SAB82532_REGS_PENDING, &up->irqflags);
424         if (test_bit(SAB82532_XPR, &up->irqflags))
425                 sunsab_tx_idle(up);
426 }
427
428 /* port->lock is held by caller and interrupts are disabled.  */
429 static unsigned int sunsab_get_mctrl(struct uart_port *port)
430 {
431         struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
432         unsigned char val;
433         unsigned int result;
434
435         result = 0;
436
437         val = readb(&up->regs->r.pvr);
438         result |= (val & up->pvr_dsr_bit) ? 0 : TIOCM_DSR;
439
440         val = readb(&up->regs->r.vstr);
441         result |= (val & SAB82532_VSTR_CD) ? 0 : TIOCM_CAR;
442
443         val = readb(&up->regs->r.star);
444         result |= (val & SAB82532_STAR_CTS) ? TIOCM_CTS : 0;
445
446         return result;
447 }
448
449 /* port->lock held by caller.  */
450 static void sunsab_stop_tx(struct uart_port *port)
451 {
452         struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
453
454         up->interrupt_mask1 |= SAB82532_IMR1_XPR;
455         writeb(up->interrupt_mask1, &up->regs->w.imr1);
456 }
457
458 /* port->lock held by caller.  */
459 static void sunsab_tx_idle(struct uart_sunsab_port *up)
460 {
461         if (test_bit(SAB82532_REGS_PENDING, &up->irqflags)) {
462                 u8 tmp;
463
464                 clear_bit(SAB82532_REGS_PENDING, &up->irqflags);
465                 writeb(up->cached_mode, &up->regs->rw.mode);
466                 writeb(up->cached_pvr, &up->regs->rw.pvr);
467                 writeb(up->cached_dafo, &up->regs->w.dafo);
468
469                 writeb(up->cached_ebrg & 0xff, &up->regs->w.bgr);
470                 tmp = readb(&up->regs->rw.ccr2);
471                 tmp &= ~0xc0;
472                 tmp |= (up->cached_ebrg >> 2) & 0xc0;
473                 writeb(tmp, &up->regs->rw.ccr2);
474         }
475 }
476
477 /* port->lock held by caller.  */
478 static void sunsab_start_tx(struct uart_port *port)
479 {
480         struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
481         struct circ_buf *xmit = &up->port.info->xmit;
482         int i;
483
484         up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR);
485         writeb(up->interrupt_mask1, &up->regs->w.imr1);
486         
487         if (!test_bit(SAB82532_XPR, &up->irqflags))
488                 return;
489
490         clear_bit(SAB82532_ALLS, &up->irqflags);
491         clear_bit(SAB82532_XPR, &up->irqflags);
492
493         for (i = 0; i < up->port.fifosize; i++) {
494                 writeb(xmit->buf[xmit->tail],
495                        &up->regs->w.xfifo[i]);
496                 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
497                 up->port.icount.tx++;
498                 if (uart_circ_empty(xmit))
499                         break;
500         }
501
502         /* Issue a Transmit Frame command.  */
503         sunsab_cec_wait(up);
504         writeb(SAB82532_CMDR_XF, &up->regs->w.cmdr);
505 }
506
507 /* port->lock is not held.  */
508 static void sunsab_send_xchar(struct uart_port *port, char ch)
509 {
510         struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
511         unsigned long flags;
512
513         spin_lock_irqsave(&up->port.lock, flags);
514
515         sunsab_tec_wait(up);
516         writeb(ch, &up->regs->w.tic);
517
518         spin_unlock_irqrestore(&up->port.lock, flags);
519 }
520
521 /* port->lock held by caller.  */
522 static void sunsab_stop_rx(struct uart_port *port)
523 {
524         struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
525
526         up->interrupt_mask0 |= SAB82532_ISR0_TCD;
527         writeb(up->interrupt_mask1, &up->regs->w.imr0);
528 }
529
530 /* port->lock held by caller.  */
531 static void sunsab_enable_ms(struct uart_port *port)
532 {
533         /* For now we always receive these interrupts.  */
534 }
535
536 /* port->lock is not held.  */
537 static void sunsab_break_ctl(struct uart_port *port, int break_state)
538 {
539         struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
540         unsigned long flags;
541         unsigned char val;
542
543         spin_lock_irqsave(&up->port.lock, flags);
544
545         val = up->cached_dafo;
546         if (break_state)
547                 val |= SAB82532_DAFO_XBRK;
548         else
549                 val &= ~SAB82532_DAFO_XBRK;
550         up->cached_dafo = val;
551
552         set_bit(SAB82532_REGS_PENDING, &up->irqflags);
553         if (test_bit(SAB82532_XPR, &up->irqflags))
554                 sunsab_tx_idle(up);
555
556         spin_unlock_irqrestore(&up->port.lock, flags);
557 }
558
559 /* port->lock is not held.  */
560 static int sunsab_startup(struct uart_port *port)
561 {
562         struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
563         unsigned long flags;
564         unsigned char tmp;
565
566         spin_lock_irqsave(&up->port.lock, flags);
567
568         /*
569          * Wait for any commands or immediate characters
570          */
571         sunsab_cec_wait(up);
572         sunsab_tec_wait(up);
573
574         /*
575          * Clear the FIFO buffers.
576          */
577         writeb(SAB82532_CMDR_RRES, &up->regs->w.cmdr);
578         sunsab_cec_wait(up);
579         writeb(SAB82532_CMDR_XRES, &up->regs->w.cmdr);
580
581         /*
582          * Clear the interrupt registers.
583          */
584         (void) readb(&up->regs->r.isr0);
585         (void) readb(&up->regs->r.isr1);
586
587         /*
588          * Now, initialize the UART 
589          */
590         writeb(0, &up->regs->w.ccr0);                           /* power-down */
591         writeb(SAB82532_CCR0_MCE | SAB82532_CCR0_SC_NRZ |
592                SAB82532_CCR0_SM_ASYNC, &up->regs->w.ccr0);
593         writeb(SAB82532_CCR1_ODS | SAB82532_CCR1_BCR | 7, &up->regs->w.ccr1);
594         writeb(SAB82532_CCR2_BDF | SAB82532_CCR2_SSEL |
595                SAB82532_CCR2_TOE, &up->regs->w.ccr2);
596         writeb(0, &up->regs->w.ccr3);
597         writeb(SAB82532_CCR4_MCK4 | SAB82532_CCR4_EBRG, &up->regs->w.ccr4);
598         up->cached_mode = (SAB82532_MODE_RTS | SAB82532_MODE_FCTS |
599                            SAB82532_MODE_RAC);
600         writeb(up->cached_mode, &up->regs->w.mode);
601         writeb(SAB82532_RFC_DPS|SAB82532_RFC_RFTH_32, &up->regs->w.rfc);
602         
603         tmp = readb(&up->regs->rw.ccr0);
604         tmp |= SAB82532_CCR0_PU;        /* power-up */
605         writeb(tmp, &up->regs->rw.ccr0);
606
607         /*
608          * Finally, enable interrupts
609          */
610         up->interrupt_mask0 = (SAB82532_IMR0_PERR | SAB82532_IMR0_FERR |
611                                SAB82532_IMR0_PLLA);
612         writeb(up->interrupt_mask0, &up->regs->w.imr0);
613         up->interrupt_mask1 = (SAB82532_IMR1_BRKT | SAB82532_IMR1_ALLS |
614                                SAB82532_IMR1_XOFF | SAB82532_IMR1_TIN |
615                                SAB82532_IMR1_CSC | SAB82532_IMR1_XON |
616                                SAB82532_IMR1_XPR);
617         writeb(up->interrupt_mask1, &up->regs->w.imr1);
618         set_bit(SAB82532_ALLS, &up->irqflags);
619         set_bit(SAB82532_XPR, &up->irqflags);
620
621         spin_unlock_irqrestore(&up->port.lock, flags);
622
623         return 0;
624 }
625
626 /* port->lock is not held.  */
627 static void sunsab_shutdown(struct uart_port *port)
628 {
629         struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
630         unsigned long flags;
631
632         spin_lock_irqsave(&up->port.lock, flags);
633
634         /* Disable Interrupts */
635         up->interrupt_mask0 = 0xff;
636         writeb(up->interrupt_mask0, &up->regs->w.imr0);
637         up->interrupt_mask1 = 0xff;
638         writeb(up->interrupt_mask1, &up->regs->w.imr1);
639
640         /* Disable break condition */
641         up->cached_dafo = readb(&up->regs->rw.dafo);
642         up->cached_dafo &= ~SAB82532_DAFO_XBRK;
643         writeb(up->cached_dafo, &up->regs->rw.dafo);
644
645         /* Disable Receiver */  
646         up->cached_mode &= ~SAB82532_MODE_RAC;
647         writeb(up->cached_mode, &up->regs->rw.mode);
648
649         /*
650          * XXX FIXME
651          *
652          * If the chip is powered down here the system hangs/crashes during
653          * reboot or shutdown.  This needs to be investigated further,
654          * similar behaviour occurs in 2.4 when the driver is configured
655          * as a module only.  One hint may be that data is sometimes
656          * transmitted at 9600 baud during shutdown (regardless of the
657          * speed the chip was configured for when the port was open).
658          */
659 #if 0
660         /* Power Down */        
661         tmp = readb(&up->regs->rw.ccr0);
662         tmp &= ~SAB82532_CCR0_PU;
663         writeb(tmp, &up->regs->rw.ccr0);
664 #endif
665
666         spin_unlock_irqrestore(&up->port.lock, flags);
667 }
668
669 /*
670  * This is used to figure out the divisor speeds.
671  *
672  * The formula is:    Baud = SAB_BASE_BAUD / ((N + 1) * (1 << M)),
673  *
674  * with               0 <= N < 64 and 0 <= M < 16
675  */
676
677 static void calc_ebrg(int baud, int *n_ret, int *m_ret)
678 {
679         int     n, m;
680
681         if (baud == 0) {
682                 *n_ret = 0;
683                 *m_ret = 0;
684                 return;
685         }
686      
687         /*
688          * We scale numbers by 10 so that we get better accuracy
689          * without having to use floating point.  Here we increment m
690          * until n is within the valid range.
691          */
692         n = (SAB_BASE_BAUD * 10) / baud;
693         m = 0;
694         while (n >= 640) {
695                 n = n / 2;
696                 m++;
697         }
698         n = (n+5) / 10;
699         /*
700          * We try very hard to avoid speeds with M == 0 since they may
701          * not work correctly for XTAL frequences above 10 MHz.
702          */
703         if ((m == 0) && ((n & 1) == 0)) {
704                 n = n / 2;
705                 m++;
706         }
707         *n_ret = n - 1;
708         *m_ret = m;
709 }
710
711 /* Internal routine, port->lock is held and local interrupts are disabled.  */
712 static void sunsab_convert_to_sab(struct uart_sunsab_port *up, unsigned int cflag,
713                                   unsigned int iflag, unsigned int baud,
714                                   unsigned int quot)
715 {
716         unsigned char dafo;
717         int bits, n, m;
718
719         /* Byte size and parity */
720         switch (cflag & CSIZE) {
721               case CS5: dafo = SAB82532_DAFO_CHL5; bits = 7; break;
722               case CS6: dafo = SAB82532_DAFO_CHL6; bits = 8; break;
723               case CS7: dafo = SAB82532_DAFO_CHL7; bits = 9; break;
724               case CS8: dafo = SAB82532_DAFO_CHL8; bits = 10; break;
725               /* Never happens, but GCC is too dumb to figure it out */
726               default:  dafo = SAB82532_DAFO_CHL5; bits = 7; break;
727         }
728
729         if (cflag & CSTOPB) {
730                 dafo |= SAB82532_DAFO_STOP;
731                 bits++;
732         }
733
734         if (cflag & PARENB) {
735                 dafo |= SAB82532_DAFO_PARE;
736                 bits++;
737         }
738
739         if (cflag & PARODD) {
740                 dafo |= SAB82532_DAFO_PAR_ODD;
741         } else {
742                 dafo |= SAB82532_DAFO_PAR_EVEN;
743         }
744         up->cached_dafo = dafo;
745
746         calc_ebrg(baud, &n, &m);
747
748         up->cached_ebrg = n | (m << 6);
749
750         up->tec_timeout = (10 * 1000000) / baud;
751         up->cec_timeout = up->tec_timeout >> 2;
752
753         /* CTS flow control flags */
754         /* We encode read_status_mask and ignore_status_mask like so:
755          *
756          * ---------------------
757          * | ... | ISR1 | ISR0 |
758          * ---------------------
759          *  ..    15   8 7    0
760          */
761
762         up->port.read_status_mask = (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME |
763                                      SAB82532_ISR0_RFO | SAB82532_ISR0_RPF |
764                                      SAB82532_ISR0_CDSC);
765         up->port.read_status_mask |= (SAB82532_ISR1_CSC |
766                                       SAB82532_ISR1_ALLS |
767                                       SAB82532_ISR1_XPR) << 8;
768         if (iflag & INPCK)
769                 up->port.read_status_mask |= (SAB82532_ISR0_PERR |
770                                               SAB82532_ISR0_FERR);
771         if (iflag & (BRKINT | PARMRK))
772                 up->port.read_status_mask |= (SAB82532_ISR1_BRK << 8);
773
774         /*
775          * Characteres to ignore
776          */
777         up->port.ignore_status_mask = 0;
778         if (iflag & IGNPAR)
779                 up->port.ignore_status_mask |= (SAB82532_ISR0_PERR |
780                                                 SAB82532_ISR0_FERR);
781         if (iflag & IGNBRK) {
782                 up->port.ignore_status_mask |= (SAB82532_ISR1_BRK << 8);
783                 /*
784                  * If we're ignoring parity and break indicators,
785                  * ignore overruns too (for real raw support).
786                  */
787                 if (iflag & IGNPAR)
788                         up->port.ignore_status_mask |= SAB82532_ISR0_RFO;
789         }
790
791         /*
792          * ignore all characters if CREAD is not set
793          */
794         if ((cflag & CREAD) == 0)
795                 up->port.ignore_status_mask |= (SAB82532_ISR0_RPF |
796                                                 SAB82532_ISR0_TCD);
797
798         uart_update_timeout(&up->port, cflag,
799                             (up->port.uartclk / (16 * quot)));
800
801         /* Now schedule a register update when the chip's
802          * transmitter is idle.
803          */
804         up->cached_mode |= SAB82532_MODE_RAC;
805         set_bit(SAB82532_REGS_PENDING, &up->irqflags);
806         if (test_bit(SAB82532_XPR, &up->irqflags))
807                 sunsab_tx_idle(up);
808 }
809
810 /* port->lock is not held.  */
811 static void sunsab_set_termios(struct uart_port *port, struct termios *termios,
812                                struct termios *old)
813 {
814         struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
815         unsigned long flags;
816         unsigned int baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
817         unsigned int quot = uart_get_divisor(port, baud);
818
819         spin_lock_irqsave(&up->port.lock, flags);
820         sunsab_convert_to_sab(up, termios->c_cflag, termios->c_iflag, baud, quot);
821         spin_unlock_irqrestore(&up->port.lock, flags);
822 }
823
824 static const char *sunsab_type(struct uart_port *port)
825 {
826         struct uart_sunsab_port *up = (void *)port;
827         static char buf[36];
828         
829         sprintf(buf, "SAB82532 %s", sab82532_version[up->type]);
830         return buf;
831 }
832
833 static void sunsab_release_port(struct uart_port *port)
834 {
835 }
836
837 static int sunsab_request_port(struct uart_port *port)
838 {
839         return 0;
840 }
841
842 static void sunsab_config_port(struct uart_port *port, int flags)
843 {
844 }
845
846 static int sunsab_verify_port(struct uart_port *port, struct serial_struct *ser)
847 {
848         return -EINVAL;
849 }
850
851 static struct uart_ops sunsab_pops = {
852         .tx_empty       = sunsab_tx_empty,
853         .set_mctrl      = sunsab_set_mctrl,
854         .get_mctrl      = sunsab_get_mctrl,
855         .stop_tx        = sunsab_stop_tx,
856         .start_tx       = sunsab_start_tx,
857         .send_xchar     = sunsab_send_xchar,
858         .stop_rx        = sunsab_stop_rx,
859         .enable_ms      = sunsab_enable_ms,
860         .break_ctl      = sunsab_break_ctl,
861         .startup        = sunsab_startup,
862         .shutdown       = sunsab_shutdown,
863         .set_termios    = sunsab_set_termios,
864         .type           = sunsab_type,
865         .release_port   = sunsab_release_port,
866         .request_port   = sunsab_request_port,
867         .config_port    = sunsab_config_port,
868         .verify_port    = sunsab_verify_port,
869 };
870
871 static struct uart_driver sunsab_reg = {
872         .owner                  = THIS_MODULE,
873         .driver_name            = "serial",
874         .devfs_name             = "tts/",
875         .dev_name               = "ttyS",
876         .major                  = TTY_MAJOR,
877 };
878
879 static struct uart_sunsab_port *sunsab_ports;
880 static int num_channels;
881
882 #ifdef CONFIG_SERIAL_SUNSAB_CONSOLE
883
884 static __inline__ void sunsab_console_putchar(struct uart_sunsab_port *up, char c)
885 {
886         unsigned long flags;
887
888         spin_lock_irqsave(&up->port.lock, flags);
889
890         sunsab_tec_wait(up);
891         writeb(c, &up->regs->w.tic);
892
893         spin_unlock_irqrestore(&up->port.lock, flags);
894 }
895
896 static void sunsab_console_write(struct console *con, const char *s, unsigned n)
897 {
898         struct uart_sunsab_port *up = &sunsab_ports[con->index];
899         int i;
900
901         for (i = 0; i < n; i++) {
902                 if (*s == '\n')
903                         sunsab_console_putchar(up, '\r');
904                 sunsab_console_putchar(up, *s++);
905         }
906         sunsab_tec_wait(up);
907 }
908
909 static int sunsab_console_setup(struct console *con, char *options)
910 {
911         struct uart_sunsab_port *up = &sunsab_ports[con->index];
912         unsigned long flags;
913         unsigned int baud, quot;
914
915         printk("Console: ttyS%d (SAB82532)\n",
916                (sunsab_reg.minor - 64) + con->index);
917
918         sunserial_console_termios(con);
919
920         /* Firmware console speed is limited to 150-->38400 baud so
921          * this hackish cflag thing is OK.
922          */
923         switch (con->cflag & CBAUD) {
924         case B150: baud = 150; break;
925         case B300: baud = 300; break;
926         case B600: baud = 600; break;
927         case B1200: baud = 1200; break;
928         case B2400: baud = 2400; break;
929         case B4800: baud = 4800; break;
930         default: case B9600: baud = 9600; break;
931         case B19200: baud = 19200; break;
932         case B38400: baud = 38400; break;
933         };
934
935         /*
936          * Temporary fix.
937          */
938         spin_lock_init(&up->port.lock);
939
940         /*
941          * Initialize the hardware
942          */
943         sunsab_startup(&up->port);
944
945         spin_lock_irqsave(&up->port.lock, flags);
946
947         /*
948          * Finally, enable interrupts
949          */
950         up->interrupt_mask0 = SAB82532_IMR0_PERR | SAB82532_IMR0_FERR |
951                                 SAB82532_IMR0_PLLA | SAB82532_IMR0_CDSC;
952         writeb(up->interrupt_mask0, &up->regs->w.imr0);
953         up->interrupt_mask1 = SAB82532_IMR1_BRKT | SAB82532_IMR1_ALLS |
954                                 SAB82532_IMR1_XOFF | SAB82532_IMR1_TIN |
955                                 SAB82532_IMR1_CSC | SAB82532_IMR1_XON |
956                                 SAB82532_IMR1_XPR;
957         writeb(up->interrupt_mask1, &up->regs->w.imr1);
958
959         quot = uart_get_divisor(&up->port, baud);
960         sunsab_convert_to_sab(up, con->cflag, 0, baud, quot);
961         sunsab_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS);
962
963         spin_unlock_irqrestore(&up->port.lock, flags);
964         
965         return 0;
966 }
967
968 static struct console sunsab_console = {
969         .name   =       "ttyS",
970         .write  =       sunsab_console_write,
971         .device =       uart_console_device,
972         .setup  =       sunsab_console_setup,
973         .flags  =       CON_PRINTBUFFER,
974         .index  =       -1,
975         .data   =       &sunsab_reg,
976 };
977 #define SUNSAB_CONSOLE  (&sunsab_console)
978
979 static void __init sunsab_console_init(void)
980 {
981         int i;
982
983         if (con_is_present())
984                 return;
985
986         for (i = 0; i < num_channels; i++) {
987                 int this_minor = sunsab_reg.minor + i;
988
989                 if ((this_minor - 64) == (serial_console - 1))
990                         break;
991         }
992         if (i == num_channels)
993                 return;
994
995         sunsab_console.index = i;
996         register_console(&sunsab_console);
997 }
998 #else
999 #define SUNSAB_CONSOLE          (NULL)
1000 #define sunsab_console_init()   do { } while (0)
1001 #endif
1002
1003 static void __init for_each_sab_edev(void (*callback)(struct linux_ebus_device *, void *), void *arg)
1004 {
1005         struct linux_ebus *ebus;
1006         struct linux_ebus_device *edev = NULL;
1007
1008         for_each_ebus(ebus) {
1009                 for_each_ebusdev(edev, ebus) {
1010                         if (!strcmp(edev->prom_name, "se")) {
1011                                 callback(edev, arg);
1012                                 continue;
1013                         } else if (!strcmp(edev->prom_name, "serial")) {
1014                                 char compat[32];
1015                                 int clen;
1016
1017                                 /* On RIO this can be an SE, check it.  We could
1018                                  * just check ebus->is_rio, but this is more portable.
1019                                  */
1020                                 clen = prom_getproperty(edev->prom_node, "compatible",
1021                                                         compat, sizeof(compat));
1022                                 if (clen > 0) {
1023                                         if (strncmp(compat, "sab82532", 8) == 0) {
1024                                                 callback(edev, arg);
1025                                                 continue;
1026                                         }
1027                                 }
1028                         }
1029                 }
1030         }
1031 }
1032
1033 static void __init sab_count_callback(struct linux_ebus_device *edev, void *arg)
1034 {
1035         int *count_p = arg;
1036
1037         (*count_p)++;
1038 }
1039
1040 static void __init sab_attach_callback(struct linux_ebus_device *edev, void *arg)
1041 {
1042         int *instance_p = arg;
1043         struct uart_sunsab_port *up;
1044         unsigned long regs, offset;
1045         int i;
1046
1047         /* Note: ports are located in reverse order */
1048         regs = edev->resource[0].start;
1049         offset = sizeof(union sab82532_async_regs);
1050         for (i = 0; i < 2; i++) {
1051                 up = &sunsab_ports[(*instance_p * 2) + 1 - i];
1052
1053                 memset(up, 0, sizeof(*up));
1054                 up->regs = ioremap(regs + offset, sizeof(union sab82532_async_regs));
1055                 up->port.irq = edev->irqs[0];
1056                 up->port.fifosize = SAB82532_XMIT_FIFO_SIZE;
1057                 up->port.mapbase = (unsigned long)up->regs;
1058                 up->port.iotype = SERIAL_IO_MEM;
1059
1060                 writeb(SAB82532_IPC_IC_ACT_LOW, &up->regs->w.ipc);
1061
1062                 offset -= sizeof(union sab82532_async_regs);
1063         }
1064         
1065         (*instance_p)++;
1066 }
1067
1068 static int __init probe_for_sabs(void)
1069 {
1070         int this_sab = 0;
1071
1072         /* Find device instances.  */
1073         for_each_sab_edev(&sab_count_callback, &this_sab);
1074         if (!this_sab)
1075                 return -ENODEV;
1076
1077         /* Allocate tables.  */
1078         sunsab_ports = kmalloc(sizeof(struct uart_sunsab_port) * this_sab * 2,
1079                                GFP_KERNEL);
1080         if (!sunsab_ports)
1081                 return -ENOMEM;
1082
1083         num_channels = this_sab * 2;
1084
1085         this_sab = 0;
1086         for_each_sab_edev(&sab_attach_callback, &this_sab);
1087         return 0;
1088 }
1089
1090 static void __init sunsab_init_hw(void)
1091 {
1092         int i;
1093
1094         for (i = 0; i < num_channels; i++) {
1095                 struct uart_sunsab_port *up = &sunsab_ports[i];
1096
1097                 up->port.line = i;
1098                 up->port.ops = &sunsab_pops;
1099                 up->port.type = PORT_SUNSAB;
1100                 up->port.uartclk = SAB_BASE_BAUD;
1101
1102                 up->type = readb(&up->regs->r.vstr) & 0x0f;
1103                 writeb(~((1 << 1) | (1 << 2) | (1 << 4)), &up->regs->w.pcr);
1104                 writeb(0xff, &up->regs->w.pim);
1105                 if (up->port.line == 0) {
1106                         up->pvr_dsr_bit = (1 << 0);
1107                         up->pvr_dtr_bit = (1 << 1);
1108                 } else {
1109                         up->pvr_dsr_bit = (1 << 3);
1110                         up->pvr_dtr_bit = (1 << 2);
1111                 }
1112                 up->cached_pvr = (1 << 1) | (1 << 2) | (1 << 4);
1113                 writeb(up->cached_pvr, &up->regs->w.pvr);
1114                 up->cached_mode = readb(&up->regs->rw.mode);
1115                 up->cached_mode |= SAB82532_MODE_FRTS;
1116                 writeb(up->cached_mode, &up->regs->rw.mode);
1117                 up->cached_mode |= SAB82532_MODE_RTS;
1118                 writeb(up->cached_mode, &up->regs->rw.mode);
1119
1120                 up->tec_timeout = SAB82532_MAX_TEC_TIMEOUT;
1121                 up->cec_timeout = SAB82532_MAX_CEC_TIMEOUT;
1122
1123                 if (!(up->port.line & 0x01)) {
1124                         if (request_irq(up->port.irq, sunsab_interrupt,
1125                                         SA_SHIRQ, "serial(sab82532)", up)) {
1126                                 printk("sunsab%d: can't get IRQ %x\n",
1127                                        i, up->port.irq);
1128                                 continue;
1129                         }
1130                 }
1131         }
1132 }
1133
1134 static int __init sunsab_init(void)
1135 {
1136         int ret = probe_for_sabs();
1137         int i;
1138
1139         if (ret < 0)
1140                 return ret;
1141
1142         sunsab_init_hw();
1143
1144         sunsab_reg.minor = sunserial_current_minor;
1145         sunsab_reg.nr = num_channels;
1146         sunsab_reg.cons = SUNSAB_CONSOLE;
1147
1148         ret = uart_register_driver(&sunsab_reg);
1149         if (ret < 0) {
1150                 int i;
1151
1152                 for (i = 0; i < num_channels; i++) {
1153                         struct uart_sunsab_port *up = &sunsab_ports[i];
1154
1155                         if (!(up->port.line & 0x01))
1156                                 free_irq(up->port.irq, up);
1157                         iounmap(up->regs);
1158                 }
1159                 kfree(sunsab_ports);
1160                 sunsab_ports = NULL;
1161
1162                 return ret;
1163         }
1164
1165         sunserial_current_minor += num_channels;
1166         
1167         sunsab_console_init();
1168
1169         for (i = 0; i < num_channels; i++) {
1170                 struct uart_sunsab_port *up = &sunsab_ports[i];
1171
1172                 uart_add_one_port(&sunsab_reg, &up->port);
1173         }
1174
1175         return 0;
1176 }
1177
1178 static void __exit sunsab_exit(void)
1179 {
1180         int i;
1181
1182         for (i = 0; i < num_channels; i++) {
1183                 struct uart_sunsab_port *up = &sunsab_ports[i];
1184
1185                 uart_remove_one_port(&sunsab_reg, &up->port);
1186
1187                 if (!(up->port.line & 0x01))
1188                         free_irq(up->port.irq, up);
1189                 iounmap(up->regs);
1190         }
1191
1192         sunserial_current_minor -= num_channels;
1193         uart_unregister_driver(&sunsab_reg);
1194
1195         kfree(sunsab_ports);
1196         sunsab_ports = NULL;
1197 }
1198
1199 module_init(sunsab_init);
1200 module_exit(sunsab_exit);
1201
1202 MODULE_AUTHOR("Eddie C. Dost and David S. Miller");
1203 MODULE_DESCRIPTION("Sun SAB82532 serial port driver");
1204 MODULE_LICENSE("GPL");