1 /* via_dma.c -- DMA support for the VIA Unichrome/Pro
3 * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
6 * Copyright 2004 Digeo, Inc., Palo Alto, CA, U.S.A.
9 * Copyright 2004 The Unichrome project.
10 * All Rights Reserved.
12 * Permission is hereby granted, free of charge, to any person obtaining a
13 * copy of this software and associated documentation files (the "Software"),
14 * to deal in the Software without restriction, including without limitation
15 * the rights to use, copy, modify, merge, publish, distribute, sub license,
16 * and/or sell copies of the Software, and to permit persons to whom the
17 * Software is furnished to do so, subject to the following conditions:
19 * The above copyright notice and this permission notice (including the
20 * next paragraph) shall be included in all copies or substantial portions
23 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
24 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
25 * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
26 * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
27 * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
28 * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
29 * USE OR OTHER DEALINGS IN THE SOFTWARE.
41 #include "via_3d_reg.h"
43 #define CMDBUF_ALIGNMENT_SIZE (0x100)
44 #define CMDBUF_ALIGNMENT_MASK (0x0ff)
46 /* defines for VIA 3D registers */
47 #define VIA_REG_STATUS 0x400
48 #define VIA_REG_TRANSET 0x43C
49 #define VIA_REG_TRANSPACE 0x440
51 /* VIA_REG_STATUS(0x400): Engine Status */
52 #define VIA_CMD_RGTR_BUSY 0x00000080 /* Command Regulator is busy */
53 #define VIA_2D_ENG_BUSY 0x00000001 /* 2D Engine is busy */
54 #define VIA_3D_ENG_BUSY 0x00000002 /* 3D Engine is busy */
55 #define VIA_VR_QUEUE_BUSY 0x00020000 /* Virtual Queue is busy */
57 #define SetReg2DAGP(nReg, nData) { \
58 *((uint32_t *)(vb)) = ((nReg) >> 2) | HALCYON_HEADER1; \
59 *((uint32_t *)(vb) + 1) = (nData); \
60 vb = ((uint32_t *)vb) + 2; \
61 dev_priv->dma_low +=8; \
64 #define via_flush_write_combine() DRM_MEMORYBARRIER()
66 #define VIA_OUT_RING_QW(w1,w2) \
69 dev_priv->dma_low += 8;
71 static void via_cmdbuf_start(drm_via_private_t * dev_priv);
72 static void via_cmdbuf_pause(drm_via_private_t * dev_priv);
73 static void via_cmdbuf_reset(drm_via_private_t * dev_priv);
74 static void via_cmdbuf_rewind(drm_via_private_t * dev_priv);
75 static int via_wait_idle(drm_via_private_t * dev_priv);
76 static void via_pad_cache(drm_via_private_t * dev_priv, int qwords);
79 * Free space in command buffer.
82 static uint32_t via_cmdbuf_space(drm_via_private_t * dev_priv)
84 uint32_t agp_base = dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr;
85 uint32_t hw_addr = *(dev_priv->hw_addr_ptr) - agp_base;
87 return ((hw_addr <= dev_priv->dma_low) ?
88 (dev_priv->dma_high + hw_addr - dev_priv->dma_low) :
89 (hw_addr - dev_priv->dma_low));
93 * How much does the command regulator lag behind?
96 static uint32_t via_cmdbuf_lag(drm_via_private_t * dev_priv)
98 uint32_t agp_base = dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr;
99 uint32_t hw_addr = *(dev_priv->hw_addr_ptr) - agp_base;
101 return ((hw_addr <= dev_priv->dma_low) ?
102 (dev_priv->dma_low - hw_addr) :
103 (dev_priv->dma_wrap + dev_priv->dma_low - hw_addr));
107 * Check that the given size fits in the buffer, otherwise wait.
111 via_cmdbuf_wait(drm_via_private_t * dev_priv, unsigned int size)
113 uint32_t agp_base = dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr;
114 uint32_t cur_addr, hw_addr, next_addr;
115 volatile uint32_t *hw_addr_ptr;
117 hw_addr_ptr = dev_priv->hw_addr_ptr;
118 cur_addr = dev_priv->dma_low;
119 next_addr = cur_addr + size + 512 * 1024;
122 hw_addr = *hw_addr_ptr - agp_base;
125 ("via_cmdbuf_wait timed out hw %x cur_addr %x next_addr %x\n",
126 hw_addr, cur_addr, next_addr);
129 if ((cur_addr < hw_addr) && (next_addr >= hw_addr))
131 } while ((cur_addr < hw_addr) && (next_addr >= hw_addr));
136 * Checks whether buffer head has reach the end. Rewind the ring buffer
139 * Returns virtual pointer to ring buffer.
142 static inline uint32_t *via_check_dma(drm_via_private_t * dev_priv,
145 if ((dev_priv->dma_low + size + 4 * CMDBUF_ALIGNMENT_SIZE) >
146 dev_priv->dma_high) {
147 via_cmdbuf_rewind(dev_priv);
149 if (via_cmdbuf_wait(dev_priv, size) != 0) {
153 return (uint32_t *) (dev_priv->dma_ptr + dev_priv->dma_low);
156 int via_dma_cleanup(struct drm_device * dev)
158 if (dev->dev_private) {
159 drm_via_private_t *dev_priv =
160 (drm_via_private_t *) dev->dev_private;
162 if (dev_priv->ring.virtual_start) {
163 via_cmdbuf_reset(dev_priv);
165 drm_core_ioremapfree(&dev_priv->ring.map, dev);
166 dev_priv->ring.virtual_start = NULL;
174 static int via_initialize(struct drm_device * dev,
175 drm_via_private_t * dev_priv,
176 drm_via_dma_init_t * init)
178 if (!dev_priv || !dev_priv->mmio) {
179 DRM_ERROR("via_dma_init called before via_map_init\n");
183 if (dev_priv->ring.virtual_start != NULL) {
184 DRM_ERROR("called again without calling cleanup\n");
188 if (!dev->agp || !dev->agp->base) {
189 DRM_ERROR("called with no agp memory available\n");
193 if (dev_priv->chipset == VIA_DX9_0) {
194 DRM_ERROR("AGP DMA is not supported on this chip\n");
198 dev_priv->ring.map.offset = dev->agp->base + init->offset;
199 dev_priv->ring.map.size = init->size;
200 dev_priv->ring.map.type = 0;
201 dev_priv->ring.map.flags = 0;
202 dev_priv->ring.map.mtrr = 0;
204 drm_core_ioremap(&dev_priv->ring.map, dev);
206 if (dev_priv->ring.map.handle == NULL) {
207 via_dma_cleanup(dev);
208 DRM_ERROR("can not ioremap virtual address for"
213 dev_priv->ring.virtual_start = dev_priv->ring.map.handle;
215 dev_priv->dma_ptr = dev_priv->ring.virtual_start;
216 dev_priv->dma_low = 0;
217 dev_priv->dma_high = init->size;
218 dev_priv->dma_wrap = init->size;
219 dev_priv->dma_offset = init->offset;
220 dev_priv->last_pause_ptr = NULL;
221 dev_priv->hw_addr_ptr =
222 (volatile uint32_t *)((char *)dev_priv->mmio->handle +
223 init->reg_pause_addr);
225 via_cmdbuf_start(dev_priv);
230 static int via_dma_init(struct drm_device *dev, void *data, struct drm_file *file_priv)
232 drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private;
233 drm_via_dma_init_t *init = data;
236 switch (init->func) {
238 if (!DRM_SUSER(DRM_CURPROC))
241 retcode = via_initialize(dev, dev_priv, init);
243 case VIA_CLEANUP_DMA:
244 if (!DRM_SUSER(DRM_CURPROC))
247 retcode = via_dma_cleanup(dev);
249 case VIA_DMA_INITIALIZED:
250 retcode = (dev_priv->ring.virtual_start != NULL) ?
261 static int via_dispatch_cmdbuffer(struct drm_device * dev, drm_via_cmdbuffer_t * cmd)
263 drm_via_private_t *dev_priv;
267 dev_priv = (drm_via_private_t *) dev->dev_private;
269 if (dev_priv->ring.virtual_start == NULL) {
270 DRM_ERROR("called without initializing AGP ring buffer.\n");
274 if (cmd->size > VIA_PCI_BUF_SIZE) {
278 if (DRM_COPY_FROM_USER(dev_priv->pci_buf, cmd->buf, cmd->size))
282 * Running this function on AGP memory is dead slow. Therefore
283 * we run it on a temporary cacheable system memory buffer and
284 * copy it to AGP memory when ready.
288 via_verify_command_stream((uint32_t *) dev_priv->pci_buf,
289 cmd->size, dev, 1))) {
293 vb = via_check_dma(dev_priv, (cmd->size < 0x100) ? 0x102 : cmd->size);
298 memcpy(vb, dev_priv->pci_buf, cmd->size);
300 dev_priv->dma_low += cmd->size;
303 * Small submissions somehow stalls the CPU. (AGP cache effects?)
304 * pad to greater size.
307 if (cmd->size < 0x100)
308 via_pad_cache(dev_priv, (0x100 - cmd->size) >> 3);
309 via_cmdbuf_pause(dev_priv);
314 int via_driver_dma_quiescent(struct drm_device * dev)
316 drm_via_private_t *dev_priv = dev->dev_private;
318 if (!via_wait_idle(dev_priv)) {
324 static int via_flush_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv)
327 LOCK_TEST_WITH_RETURN(dev, file_priv);
329 return via_driver_dma_quiescent(dev);
332 static int via_cmdbuffer(struct drm_device *dev, void *data, struct drm_file *file_priv)
334 drm_via_cmdbuffer_t *cmdbuf = data;
337 LOCK_TEST_WITH_RETURN(dev, file_priv);
339 DRM_DEBUG("buf %p size %lu\n", cmdbuf->buf, cmdbuf->size);
341 ret = via_dispatch_cmdbuffer(dev, cmdbuf);
349 static int via_dispatch_pci_cmdbuffer(struct drm_device * dev,
350 drm_via_cmdbuffer_t * cmd)
352 drm_via_private_t *dev_priv = dev->dev_private;
355 if (cmd->size > VIA_PCI_BUF_SIZE) {
358 if (DRM_COPY_FROM_USER(dev_priv->pci_buf, cmd->buf, cmd->size))
362 via_verify_command_stream((uint32_t *) dev_priv->pci_buf,
363 cmd->size, dev, 0))) {
368 via_parse_command_stream(dev, (const uint32_t *)dev_priv->pci_buf,
373 static int via_pci_cmdbuffer(struct drm_device *dev, void *data, struct drm_file *file_priv)
375 drm_via_cmdbuffer_t *cmdbuf = data;
378 LOCK_TEST_WITH_RETURN(dev, file_priv);
380 DRM_DEBUG("buf %p size %lu\n", cmdbuf->buf, cmdbuf->size);
382 ret = via_dispatch_pci_cmdbuffer(dev, cmdbuf);
390 static inline uint32_t *via_align_buffer(drm_via_private_t * dev_priv,
391 uint32_t * vb, int qw_count)
393 for (; qw_count > 0; --qw_count) {
394 VIA_OUT_RING_QW(HC_DUMMY, HC_DUMMY);
400 * This function is used internally by ring buffer management code.
402 * Returns virtual pointer to ring buffer.
404 static inline uint32_t *via_get_dma(drm_via_private_t * dev_priv)
406 return (uint32_t *) (dev_priv->dma_ptr + dev_priv->dma_low);
410 * Hooks a segment of data into the tail of the ring-buffer by
411 * modifying the pause address stored in the buffer itself. If
412 * the regulator has already paused, restart it.
414 static int via_hook_segment(drm_via_private_t * dev_priv,
415 uint32_t pause_addr_hi, uint32_t pause_addr_lo,
419 volatile uint32_t *paused_at = dev_priv->last_pause_ptr;
424 via_flush_write_combine();
425 (void) *(volatile uint32_t *)(via_get_dma(dev_priv) -1);
427 *paused_at = pause_addr_lo;
428 via_flush_write_combine();
431 reader = *(dev_priv->hw_addr_ptr);
432 ptr = ((volatile char *)paused_at - dev_priv->dma_ptr) +
433 dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr + 4;
435 dev_priv->last_pause_ptr = via_get_dma(dev_priv) - 1;
438 * If there is a possibility that the command reader will
439 * miss the new pause address and pause on the old one,
440 * In that case we need to program the new start address
444 diff = (uint32_t) (ptr - reader) - dev_priv->dma_diff;
446 while(diff == 0 && count--) {
447 paused = (VIA_READ(0x41c) & 0x80000000);
450 reader = *(dev_priv->hw_addr_ptr);
451 diff = (uint32_t) (ptr - reader) - dev_priv->dma_diff;
454 paused = VIA_READ(0x41c) & 0x80000000;
456 if (paused && !no_pci_fire) {
457 reader = *(dev_priv->hw_addr_ptr);
458 diff = (uint32_t) (ptr - reader) - dev_priv->dma_diff;
459 diff &= (dev_priv->dma_high - 1);
460 if (diff != 0 && diff < (dev_priv->dma_high >> 1)) {
461 DRM_ERROR("Paused at incorrect address. "
462 "0x%08x, 0x%08x 0x%08x\n",
463 ptr, reader, dev_priv->dma_diff);
464 } else if (diff == 0) {
466 * There is a concern that these writes may stall the PCI bus
467 * if the GPU is not idle. However, idling the GPU first
468 * doesn't make a difference.
471 VIA_WRITE(VIA_REG_TRANSET, (HC_ParaType_PreCR << 16));
472 VIA_WRITE(VIA_REG_TRANSPACE, pause_addr_hi);
473 VIA_WRITE(VIA_REG_TRANSPACE, pause_addr_lo);
474 VIA_READ(VIA_REG_TRANSPACE);
480 static int via_wait_idle(drm_via_private_t * dev_priv)
482 int count = 10000000;
484 while (!(VIA_READ(VIA_REG_STATUS) & VIA_VR_QUEUE_BUSY) && --count)
487 while (count && (VIA_READ(VIA_REG_STATUS) &
488 (VIA_CMD_RGTR_BUSY | VIA_2D_ENG_BUSY |
494 static uint32_t *via_align_cmd(drm_via_private_t * dev_priv, uint32_t cmd_type,
495 uint32_t addr, uint32_t * cmd_addr_hi,
496 uint32_t * cmd_addr_lo, int skip_wait)
499 uint32_t cmd_addr, addr_lo, addr_hi;
501 uint32_t qw_pad_count;
504 via_cmdbuf_wait(dev_priv, 2 * CMDBUF_ALIGNMENT_SIZE);
506 vb = via_get_dma(dev_priv);
507 VIA_OUT_RING_QW(HC_HEADER2 | ((VIA_REG_TRANSET >> 2) << 12) |
508 (VIA_REG_TRANSPACE >> 2), HC_ParaType_PreCR << 16);
509 agp_base = dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr;
510 qw_pad_count = (CMDBUF_ALIGNMENT_SIZE >> 3) -
511 ((dev_priv->dma_low & CMDBUF_ALIGNMENT_MASK) >> 3);
513 cmd_addr = (addr) ? addr :
514 agp_base + dev_priv->dma_low - 8 + (qw_pad_count << 3);
515 addr_lo = ((HC_SubA_HAGPBpL << 24) | (cmd_type & HC_HAGPBpID_MASK) |
516 (cmd_addr & HC_HAGPBpL_MASK));
517 addr_hi = ((HC_SubA_HAGPBpH << 24) | (cmd_addr >> 24));
519 vb = via_align_buffer(dev_priv, vb, qw_pad_count - 1);
520 VIA_OUT_RING_QW(*cmd_addr_hi = addr_hi, *cmd_addr_lo = addr_lo);
524 static void via_cmdbuf_start(drm_via_private_t * dev_priv)
526 uint32_t pause_addr_lo, pause_addr_hi;
527 uint32_t start_addr, start_addr_lo;
528 uint32_t end_addr, end_addr_lo;
535 dev_priv->dma_low = 0;
537 agp_base = dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr;
538 start_addr = agp_base;
539 end_addr = agp_base + dev_priv->dma_high;
541 start_addr_lo = ((HC_SubA_HAGPBstL << 24) | (start_addr & 0xFFFFFF));
542 end_addr_lo = ((HC_SubA_HAGPBendL << 24) | (end_addr & 0xFFFFFF));
543 command = ((HC_SubA_HAGPCMNT << 24) | (start_addr >> 24) |
544 ((end_addr & 0xff000000) >> 16));
546 dev_priv->last_pause_ptr =
547 via_align_cmd(dev_priv, HC_HAGPBpID_PAUSE, 0,
548 &pause_addr_hi, &pause_addr_lo, 1) - 1;
550 via_flush_write_combine();
551 (void) *(volatile uint32_t *)dev_priv->last_pause_ptr;
553 VIA_WRITE(VIA_REG_TRANSET, (HC_ParaType_PreCR << 16));
554 VIA_WRITE(VIA_REG_TRANSPACE, command);
555 VIA_WRITE(VIA_REG_TRANSPACE, start_addr_lo);
556 VIA_WRITE(VIA_REG_TRANSPACE, end_addr_lo);
558 VIA_WRITE(VIA_REG_TRANSPACE, pause_addr_hi);
559 VIA_WRITE(VIA_REG_TRANSPACE, pause_addr_lo);
560 DRM_WRITEMEMORYBARRIER();
561 VIA_WRITE(VIA_REG_TRANSPACE, command | HC_HAGPCMNT_MASK);
562 VIA_READ(VIA_REG_TRANSPACE);
564 dev_priv->dma_diff = 0;
567 while (!(VIA_READ(0x41c) & 0x80000000) && count--);
569 reader = *(dev_priv->hw_addr_ptr);
570 ptr = ((volatile char *)dev_priv->last_pause_ptr - dev_priv->dma_ptr) +
571 dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr + 4;
574 * This is the difference between where we tell the
575 * command reader to pause and where it actually pauses.
576 * This differs between hw implementation so we need to
580 dev_priv->dma_diff = ptr - reader;
583 static void via_pad_cache(drm_via_private_t * dev_priv, int qwords)
587 via_cmdbuf_wait(dev_priv, qwords + 2);
588 vb = via_get_dma(dev_priv);
589 VIA_OUT_RING_QW(HC_HEADER2, HC_ParaType_NotTex << 16);
590 via_align_buffer(dev_priv, vb, qwords);
593 static inline void via_dummy_bitblt(drm_via_private_t * dev_priv)
595 uint32_t *vb = via_get_dma(dev_priv);
596 SetReg2DAGP(0x0C, (0 | (0 << 16)));
597 SetReg2DAGP(0x10, 0 | (0 << 16));
598 SetReg2DAGP(0x0, 0x1 | 0x2000 | 0xAA000000);
601 static void via_cmdbuf_jump(drm_via_private_t * dev_priv)
604 uint32_t pause_addr_lo, pause_addr_hi;
605 uint32_t jump_addr_lo, jump_addr_hi;
606 volatile uint32_t *last_pause_ptr;
607 uint32_t dma_low_save1, dma_low_save2;
609 agp_base = dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr;
610 via_align_cmd(dev_priv, HC_HAGPBpID_JUMP, 0, &jump_addr_hi,
613 dev_priv->dma_wrap = dev_priv->dma_low;
616 * Wrap command buffer to the beginning.
619 dev_priv->dma_low = 0;
620 if (via_cmdbuf_wait(dev_priv, CMDBUF_ALIGNMENT_SIZE) != 0) {
621 DRM_ERROR("via_cmdbuf_jump failed\n");
624 via_dummy_bitblt(dev_priv);
625 via_dummy_bitblt(dev_priv);
628 via_align_cmd(dev_priv, HC_HAGPBpID_PAUSE, 0, &pause_addr_hi,
629 &pause_addr_lo, 0) - 1;
630 via_align_cmd(dev_priv, HC_HAGPBpID_PAUSE, 0, &pause_addr_hi,
633 *last_pause_ptr = pause_addr_lo;
634 dma_low_save1 = dev_priv->dma_low;
637 * Now, set a trap that will pause the regulator if it tries to rerun the old
638 * command buffer. (Which may happen if via_hook_segment detecs a command regulator pause
639 * and reissues the jump command over PCI, while the regulator has already taken the jump
640 * and actually paused at the current buffer end).
641 * There appears to be no other way to detect this condition, since the hw_addr_pointer
642 * does not seem to get updated immediately when a jump occurs.
646 via_align_cmd(dev_priv, HC_HAGPBpID_PAUSE, 0, &pause_addr_hi,
647 &pause_addr_lo, 0) - 1;
648 via_align_cmd(dev_priv, HC_HAGPBpID_PAUSE, 0, &pause_addr_hi,
650 *last_pause_ptr = pause_addr_lo;
652 dma_low_save2 = dev_priv->dma_low;
653 dev_priv->dma_low = dma_low_save1;
654 via_hook_segment(dev_priv, jump_addr_hi, jump_addr_lo, 0);
655 dev_priv->dma_low = dma_low_save2;
656 via_hook_segment(dev_priv, pause_addr_hi, pause_addr_lo, 0);
660 static void via_cmdbuf_rewind(drm_via_private_t * dev_priv)
662 via_cmdbuf_jump(dev_priv);
665 static void via_cmdbuf_flush(drm_via_private_t * dev_priv, uint32_t cmd_type)
667 uint32_t pause_addr_lo, pause_addr_hi;
669 via_align_cmd(dev_priv, cmd_type, 0, &pause_addr_hi, &pause_addr_lo, 0);
670 via_hook_segment(dev_priv, pause_addr_hi, pause_addr_lo, 0);
673 static void via_cmdbuf_pause(drm_via_private_t * dev_priv)
675 via_cmdbuf_flush(dev_priv, HC_HAGPBpID_PAUSE);
678 static void via_cmdbuf_reset(drm_via_private_t * dev_priv)
680 via_cmdbuf_flush(dev_priv, HC_HAGPBpID_STOP);
681 via_wait_idle(dev_priv);
685 * User interface to the space and lag functions.
688 static int via_cmdbuf_size(struct drm_device *dev, void *data, struct drm_file *file_priv)
690 drm_via_cmdbuf_size_t *d_siz = data;
692 uint32_t tmp_size, count;
693 drm_via_private_t *dev_priv;
696 LOCK_TEST_WITH_RETURN(dev, file_priv);
698 dev_priv = (drm_via_private_t *) dev->dev_private;
700 if (dev_priv->ring.virtual_start == NULL) {
701 DRM_ERROR("called without initializing AGP ring buffer.\n");
706 tmp_size = d_siz->size;
707 switch (d_siz->func) {
708 case VIA_CMDBUF_SPACE:
709 while (((tmp_size = via_cmdbuf_space(dev_priv)) < d_siz->size)
716 DRM_ERROR("VIA_CMDBUF_SPACE timed out.\n");
721 while (((tmp_size = via_cmdbuf_lag(dev_priv)) > d_siz->size)
728 DRM_ERROR("VIA_CMDBUF_LAG timed out.\n");
735 d_siz->size = tmp_size;
740 struct drm_ioctl_desc via_ioctls[] = {
741 DRM_IOCTL_DEF(DRM_VIA_ALLOCMEM, via_mem_alloc, DRM_AUTH),
742 DRM_IOCTL_DEF(DRM_VIA_FREEMEM, via_mem_free, DRM_AUTH),
743 DRM_IOCTL_DEF(DRM_VIA_AGP_INIT, via_agp_init, DRM_AUTH|DRM_MASTER),
744 DRM_IOCTL_DEF(DRM_VIA_FB_INIT, via_fb_init, DRM_AUTH|DRM_MASTER),
745 DRM_IOCTL_DEF(DRM_VIA_MAP_INIT, via_map_init, DRM_AUTH|DRM_MASTER),
746 DRM_IOCTL_DEF(DRM_VIA_DEC_FUTEX, via_decoder_futex, DRM_AUTH),
747 DRM_IOCTL_DEF(DRM_VIA_DMA_INIT, via_dma_init, DRM_AUTH),
748 DRM_IOCTL_DEF(DRM_VIA_CMDBUFFER, via_cmdbuffer, DRM_AUTH),
749 DRM_IOCTL_DEF(DRM_VIA_FLUSH, via_flush_ioctl, DRM_AUTH),
750 DRM_IOCTL_DEF(DRM_VIA_PCICMD, via_pci_cmdbuffer, DRM_AUTH),
751 DRM_IOCTL_DEF(DRM_VIA_CMDBUF_SIZE, via_cmdbuf_size, DRM_AUTH),
752 DRM_IOCTL_DEF(DRM_VIA_WAIT_IRQ, via_wait_irq, DRM_AUTH),
753 DRM_IOCTL_DEF(DRM_VIA_DMA_BLIT, via_dma_blit, DRM_AUTH),
754 DRM_IOCTL_DEF(DRM_VIA_BLIT_SYNC, via_dma_blit_sync, DRM_AUTH)
757 int via_max_ioctl = DRM_ARRAY_SIZE(via_ioctls);