Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
[linux-2.6] / arch / powerpc / sysdev / cpm1.c
1 /*
2  * General Purpose functions for the global management of the
3  * Communication Processor Module.
4  * Copyright (c) 1997 Dan error_act (dmalek@jlc.net)
5  *
6  * In addition to the individual control of the communication
7  * channels, there are a few functions that globally affect the
8  * communication processor.
9  *
10  * Buffer descriptors must be allocated from the dual ported memory
11  * space.  The allocator for that is here.  When the communication
12  * process is reset, we reclaim the memory available.  There is
13  * currently no deallocator for this memory.
14  * The amount of space available is platform dependent.  On the
15  * MBX, the EPPC software loads additional microcode into the
16  * communication processor, and uses some of the DP ram for this
17  * purpose.  Current, the first 512 bytes and the last 256 bytes of
18  * memory are used.  Right now I am conservative and only use the
19  * memory that can never be used for microcode.  If there are
20  * applications that require more DP ram, we can expand the boundaries
21  * but then we have to be careful of any downloaded microcode.
22  */
23 #include <linux/errno.h>
24 #include <linux/sched.h>
25 #include <linux/kernel.h>
26 #include <linux/dma-mapping.h>
27 #include <linux/param.h>
28 #include <linux/string.h>
29 #include <linux/mm.h>
30 #include <linux/interrupt.h>
31 #include <linux/irq.h>
32 #include <linux/module.h>
33 #include <linux/spinlock.h>
34 #include <asm/page.h>
35 #include <asm/pgtable.h>
36 #include <asm/8xx_immap.h>
37 #include <asm/cpm1.h>
38 #include <asm/io.h>
39 #include <asm/tlbflush.h>
40 #include <asm/rheap.h>
41 #include <asm/prom.h>
42 #include <asm/cpm.h>
43
44 #include <asm/fs_pd.h>
45
46 #ifdef CONFIG_8xx_GPIO
47 #include <linux/of_gpio.h>
48 #endif
49
50 #define CPM_MAP_SIZE    (0x4000)
51
52 cpm8xx_t __iomem *cpmp;  /* Pointer to comm processor space */
53 immap_t __iomem *mpc8xx_immr;
54 static cpic8xx_t __iomem *cpic_reg;
55
56 static struct irq_host *cpm_pic_host;
57
58 static void cpm_mask_irq(unsigned int irq)
59 {
60         unsigned int cpm_vec = (unsigned int)irq_map[irq].hwirq;
61
62         clrbits32(&cpic_reg->cpic_cimr, (1 << cpm_vec));
63 }
64
65 static void cpm_unmask_irq(unsigned int irq)
66 {
67         unsigned int cpm_vec = (unsigned int)irq_map[irq].hwirq;
68
69         setbits32(&cpic_reg->cpic_cimr, (1 << cpm_vec));
70 }
71
72 static void cpm_end_irq(unsigned int irq)
73 {
74         unsigned int cpm_vec = (unsigned int)irq_map[irq].hwirq;
75
76         out_be32(&cpic_reg->cpic_cisr, (1 << cpm_vec));
77 }
78
79 static struct irq_chip cpm_pic = {
80         .typename = " CPM PIC ",
81         .mask = cpm_mask_irq,
82         .unmask = cpm_unmask_irq,
83         .eoi = cpm_end_irq,
84 };
85
86 int cpm_get_irq(void)
87 {
88         int cpm_vec;
89
90         /* Get the vector by setting the ACK bit and then reading
91          * the register.
92          */
93         out_be16(&cpic_reg->cpic_civr, 1);
94         cpm_vec = in_be16(&cpic_reg->cpic_civr);
95         cpm_vec >>= 11;
96
97         return irq_linear_revmap(cpm_pic_host, cpm_vec);
98 }
99
100 static int cpm_pic_host_map(struct irq_host *h, unsigned int virq,
101                           irq_hw_number_t hw)
102 {
103         pr_debug("cpm_pic_host_map(%d, 0x%lx)\n", virq, hw);
104
105         get_irq_desc(virq)->status |= IRQ_LEVEL;
106         set_irq_chip_and_handler(virq, &cpm_pic, handle_fasteoi_irq);
107         return 0;
108 }
109
110 /* The CPM can generate the error interrupt when there is a race condition
111  * between generating and masking interrupts.  All we have to do is ACK it
112  * and return.  This is a no-op function so we don't need any special
113  * tests in the interrupt handler.
114  */
115 static irqreturn_t cpm_error_interrupt(int irq, void *dev)
116 {
117         return IRQ_HANDLED;
118 }
119
120 static struct irqaction cpm_error_irqaction = {
121         .handler = cpm_error_interrupt,
122         .mask = CPU_MASK_NONE,
123         .name = "error",
124 };
125
126 static struct irq_host_ops cpm_pic_host_ops = {
127         .map = cpm_pic_host_map,
128 };
129
130 unsigned int cpm_pic_init(void)
131 {
132         struct device_node *np = NULL;
133         struct resource res;
134         unsigned int sirq = NO_IRQ, hwirq, eirq;
135         int ret;
136
137         pr_debug("cpm_pic_init\n");
138
139         np = of_find_compatible_node(NULL, NULL, "fsl,cpm1-pic");
140         if (np == NULL)
141                 np = of_find_compatible_node(NULL, "cpm-pic", "CPM");
142         if (np == NULL) {
143                 printk(KERN_ERR "CPM PIC init: can not find cpm-pic node\n");
144                 return sirq;
145         }
146
147         ret = of_address_to_resource(np, 0, &res);
148         if (ret)
149                 goto end;
150
151         cpic_reg = ioremap(res.start, res.end - res.start + 1);
152         if (cpic_reg == NULL)
153                 goto end;
154
155         sirq = irq_of_parse_and_map(np, 0);
156         if (sirq == NO_IRQ)
157                 goto end;
158
159         /* Initialize the CPM interrupt controller. */
160         hwirq = (unsigned int)irq_map[sirq].hwirq;
161         out_be32(&cpic_reg->cpic_cicr,
162             (CICR_SCD_SCC4 | CICR_SCC_SCC3 | CICR_SCB_SCC2 | CICR_SCA_SCC1) |
163                 ((hwirq/2) << 13) | CICR_HP_MASK);
164
165         out_be32(&cpic_reg->cpic_cimr, 0);
166
167         cpm_pic_host = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR,
168                                       64, &cpm_pic_host_ops, 64);
169         if (cpm_pic_host == NULL) {
170                 printk(KERN_ERR "CPM2 PIC: failed to allocate irq host!\n");
171                 sirq = NO_IRQ;
172                 goto end;
173         }
174
175         /* Install our own error handler. */
176         np = of_find_compatible_node(NULL, NULL, "fsl,cpm1");
177         if (np == NULL)
178                 np = of_find_node_by_type(NULL, "cpm");
179         if (np == NULL) {
180                 printk(KERN_ERR "CPM PIC init: can not find cpm node\n");
181                 goto end;
182         }
183
184         eirq = irq_of_parse_and_map(np, 0);
185         if (eirq == NO_IRQ)
186                 goto end;
187
188         if (setup_irq(eirq, &cpm_error_irqaction))
189                 printk(KERN_ERR "Could not allocate CPM error IRQ!");
190
191         setbits32(&cpic_reg->cpic_cicr, CICR_IEN);
192
193 end:
194         of_node_put(np);
195         return sirq;
196 }
197
198 void __init cpm_reset(void)
199 {
200         sysconf8xx_t __iomem *siu_conf;
201
202         mpc8xx_immr = ioremap(get_immrbase(), 0x4000);
203         if (!mpc8xx_immr) {
204                 printk(KERN_CRIT "Could not map IMMR\n");
205                 return;
206         }
207
208         cpmp = &mpc8xx_immr->im_cpm;
209
210 #ifndef CONFIG_PPC_EARLY_DEBUG_CPM
211         /* Perform a reset.
212         */
213         out_be16(&cpmp->cp_cpcr, CPM_CR_RST | CPM_CR_FLG);
214
215         /* Wait for it.
216         */
217         while (in_be16(&cpmp->cp_cpcr) & CPM_CR_FLG);
218 #endif
219
220 #ifdef CONFIG_UCODE_PATCH
221         cpm_load_patch(cpmp);
222 #endif
223
224         /* Set SDMA Bus Request priority 5.
225          * On 860T, this also enables FEC priority 6.  I am not sure
226          * this is what we realy want for some applications, but the
227          * manual recommends it.
228          * Bit 25, FAM can also be set to use FEC aggressive mode (860T).
229          */
230         siu_conf = immr_map(im_siu_conf);
231         out_be32(&siu_conf->sc_sdcr, 1);
232         immr_unmap(siu_conf);
233
234         cpm_muram_init();
235 }
236
237 static DEFINE_SPINLOCK(cmd_lock);
238
239 #define MAX_CR_CMD_LOOPS        10000
240
241 int cpm_command(u32 command, u8 opcode)
242 {
243         int i, ret;
244         unsigned long flags;
245
246         if (command & 0xffffff0f)
247                 return -EINVAL;
248
249         spin_lock_irqsave(&cmd_lock, flags);
250
251         ret = 0;
252         out_be16(&cpmp->cp_cpcr, command | CPM_CR_FLG | (opcode << 8));
253         for (i = 0; i < MAX_CR_CMD_LOOPS; i++)
254                 if ((in_be16(&cpmp->cp_cpcr) & CPM_CR_FLG) == 0)
255                         goto out;
256
257         printk(KERN_ERR "%s(): Not able to issue CPM command\n", __func__);
258         ret = -EIO;
259 out:
260         spin_unlock_irqrestore(&cmd_lock, flags);
261         return ret;
262 }
263 EXPORT_SYMBOL(cpm_command);
264
265 /* Set a baud rate generator.  This needs lots of work.  There are
266  * four BRGs, any of which can be wired to any channel.
267  * The internal baud rate clock is the system clock divided by 16.
268  * This assumes the baudrate is 16x oversampled by the uart.
269  */
270 #define BRG_INT_CLK             (get_brgfreq())
271 #define BRG_UART_CLK            (BRG_INT_CLK/16)
272 #define BRG_UART_CLK_DIV16      (BRG_UART_CLK/16)
273
274 void
275 cpm_setbrg(uint brg, uint rate)
276 {
277         u32 __iomem *bp;
278
279         /* This is good enough to get SMCs running.....
280         */
281         bp = &cpmp->cp_brgc1;
282         bp += brg;
283         /* The BRG has a 12-bit counter.  For really slow baud rates (or
284          * really fast processors), we may have to further divide by 16.
285          */
286         if (((BRG_UART_CLK / rate) - 1) < 4096)
287                 out_be32(bp, (((BRG_UART_CLK / rate) - 1) << 1) | CPM_BRG_EN);
288         else
289                 out_be32(bp, (((BRG_UART_CLK_DIV16 / rate) - 1) << 1) |
290                               CPM_BRG_EN | CPM_BRG_DIV16);
291 }
292
293 struct cpm_ioport16 {
294         __be16 dir, par, odr_sor, dat, intr;
295         __be16 res[3];
296 };
297
298 struct cpm_ioport32b {
299         __be32 dir, par, odr, dat;
300 };
301
302 struct cpm_ioport32e {
303         __be32 dir, par, sor, odr, dat;
304 };
305
306 static void cpm1_set_pin32(int port, int pin, int flags)
307 {
308         struct cpm_ioport32e __iomem *iop;
309         pin = 1 << (31 - pin);
310
311         if (port == CPM_PORTB)
312                 iop = (struct cpm_ioport32e __iomem *)
313                       &mpc8xx_immr->im_cpm.cp_pbdir;
314         else
315                 iop = (struct cpm_ioport32e __iomem *)
316                       &mpc8xx_immr->im_cpm.cp_pedir;
317
318         if (flags & CPM_PIN_OUTPUT)
319                 setbits32(&iop->dir, pin);
320         else
321                 clrbits32(&iop->dir, pin);
322
323         if (!(flags & CPM_PIN_GPIO))
324                 setbits32(&iop->par, pin);
325         else
326                 clrbits32(&iop->par, pin);
327
328         if (port == CPM_PORTB) {
329                 if (flags & CPM_PIN_OPENDRAIN)
330                         setbits16(&mpc8xx_immr->im_cpm.cp_pbodr, pin);
331                 else
332                         clrbits16(&mpc8xx_immr->im_cpm.cp_pbodr, pin);
333         }
334
335         if (port == CPM_PORTE) {
336                 if (flags & CPM_PIN_SECONDARY)
337                         setbits32(&iop->sor, pin);
338                 else
339                         clrbits32(&iop->sor, pin);
340
341                 if (flags & CPM_PIN_OPENDRAIN)
342                         setbits32(&mpc8xx_immr->im_cpm.cp_peodr, pin);
343                 else
344                         clrbits32(&mpc8xx_immr->im_cpm.cp_peodr, pin);
345         }
346 }
347
348 static void cpm1_set_pin16(int port, int pin, int flags)
349 {
350         struct cpm_ioport16 __iomem *iop =
351                 (struct cpm_ioport16 __iomem *)&mpc8xx_immr->im_ioport;
352
353         pin = 1 << (15 - pin);
354
355         if (port != 0)
356                 iop += port - 1;
357
358         if (flags & CPM_PIN_OUTPUT)
359                 setbits16(&iop->dir, pin);
360         else
361                 clrbits16(&iop->dir, pin);
362
363         if (!(flags & CPM_PIN_GPIO))
364                 setbits16(&iop->par, pin);
365         else
366                 clrbits16(&iop->par, pin);
367
368         if (port == CPM_PORTA) {
369                 if (flags & CPM_PIN_OPENDRAIN)
370                         setbits16(&iop->odr_sor, pin);
371                 else
372                         clrbits16(&iop->odr_sor, pin);
373         }
374         if (port == CPM_PORTC) {
375                 if (flags & CPM_PIN_SECONDARY)
376                         setbits16(&iop->odr_sor, pin);
377                 else
378                         clrbits16(&iop->odr_sor, pin);
379         }
380 }
381
382 void cpm1_set_pin(enum cpm_port port, int pin, int flags)
383 {
384         if (port == CPM_PORTB || port == CPM_PORTE)
385                 cpm1_set_pin32(port, pin, flags);
386         else
387                 cpm1_set_pin16(port, pin, flags);
388 }
389
390 int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode)
391 {
392         int shift;
393         int i, bits = 0;
394         u32 __iomem *reg;
395         u32 mask = 7;
396
397         u8 clk_map[][3] = {
398                 {CPM_CLK_SCC1, CPM_BRG1, 0},
399                 {CPM_CLK_SCC1, CPM_BRG2, 1},
400                 {CPM_CLK_SCC1, CPM_BRG3, 2},
401                 {CPM_CLK_SCC1, CPM_BRG4, 3},
402                 {CPM_CLK_SCC1, CPM_CLK1, 4},
403                 {CPM_CLK_SCC1, CPM_CLK2, 5},
404                 {CPM_CLK_SCC1, CPM_CLK3, 6},
405                 {CPM_CLK_SCC1, CPM_CLK4, 7},
406
407                 {CPM_CLK_SCC2, CPM_BRG1, 0},
408                 {CPM_CLK_SCC2, CPM_BRG2, 1},
409                 {CPM_CLK_SCC2, CPM_BRG3, 2},
410                 {CPM_CLK_SCC2, CPM_BRG4, 3},
411                 {CPM_CLK_SCC2, CPM_CLK1, 4},
412                 {CPM_CLK_SCC2, CPM_CLK2, 5},
413                 {CPM_CLK_SCC2, CPM_CLK3, 6},
414                 {CPM_CLK_SCC2, CPM_CLK4, 7},
415
416                 {CPM_CLK_SCC3, CPM_BRG1, 0},
417                 {CPM_CLK_SCC3, CPM_BRG2, 1},
418                 {CPM_CLK_SCC3, CPM_BRG3, 2},
419                 {CPM_CLK_SCC3, CPM_BRG4, 3},
420                 {CPM_CLK_SCC3, CPM_CLK5, 4},
421                 {CPM_CLK_SCC3, CPM_CLK6, 5},
422                 {CPM_CLK_SCC3, CPM_CLK7, 6},
423                 {CPM_CLK_SCC3, CPM_CLK8, 7},
424
425                 {CPM_CLK_SCC4, CPM_BRG1, 0},
426                 {CPM_CLK_SCC4, CPM_BRG2, 1},
427                 {CPM_CLK_SCC4, CPM_BRG3, 2},
428                 {CPM_CLK_SCC4, CPM_BRG4, 3},
429                 {CPM_CLK_SCC4, CPM_CLK5, 4},
430                 {CPM_CLK_SCC4, CPM_CLK6, 5},
431                 {CPM_CLK_SCC4, CPM_CLK7, 6},
432                 {CPM_CLK_SCC4, CPM_CLK8, 7},
433
434                 {CPM_CLK_SMC1, CPM_BRG1, 0},
435                 {CPM_CLK_SMC1, CPM_BRG2, 1},
436                 {CPM_CLK_SMC1, CPM_BRG3, 2},
437                 {CPM_CLK_SMC1, CPM_BRG4, 3},
438                 {CPM_CLK_SMC1, CPM_CLK1, 4},
439                 {CPM_CLK_SMC1, CPM_CLK2, 5},
440                 {CPM_CLK_SMC1, CPM_CLK3, 6},
441                 {CPM_CLK_SMC1, CPM_CLK4, 7},
442
443                 {CPM_CLK_SMC2, CPM_BRG1, 0},
444                 {CPM_CLK_SMC2, CPM_BRG2, 1},
445                 {CPM_CLK_SMC2, CPM_BRG3, 2},
446                 {CPM_CLK_SMC2, CPM_BRG4, 3},
447                 {CPM_CLK_SMC2, CPM_CLK5, 4},
448                 {CPM_CLK_SMC2, CPM_CLK6, 5},
449                 {CPM_CLK_SMC2, CPM_CLK7, 6},
450                 {CPM_CLK_SMC2, CPM_CLK8, 7},
451         };
452
453         switch (target) {
454         case CPM_CLK_SCC1:
455                 reg = &mpc8xx_immr->im_cpm.cp_sicr;
456                 shift = 0;
457                 break;
458
459         case CPM_CLK_SCC2:
460                 reg = &mpc8xx_immr->im_cpm.cp_sicr;
461                 shift = 8;
462                 break;
463
464         case CPM_CLK_SCC3:
465                 reg = &mpc8xx_immr->im_cpm.cp_sicr;
466                 shift = 16;
467                 break;
468
469         case CPM_CLK_SCC4:
470                 reg = &mpc8xx_immr->im_cpm.cp_sicr;
471                 shift = 24;
472                 break;
473
474         case CPM_CLK_SMC1:
475                 reg = &mpc8xx_immr->im_cpm.cp_simode;
476                 shift = 12;
477                 break;
478
479         case CPM_CLK_SMC2:
480                 reg = &mpc8xx_immr->im_cpm.cp_simode;
481                 shift = 28;
482                 break;
483
484         default:
485                 printk(KERN_ERR "cpm1_clock_setup: invalid clock target\n");
486                 return -EINVAL;
487         }
488
489         if (reg == &mpc8xx_immr->im_cpm.cp_sicr && mode == CPM_CLK_RX)
490                 shift += 3;
491
492         for (i = 0; i < ARRAY_SIZE(clk_map); i++) {
493                 if (clk_map[i][0] == target && clk_map[i][1] == clock) {
494                         bits = clk_map[i][2];
495                         break;
496                 }
497         }
498
499         if (i == ARRAY_SIZE(clk_map)) {
500                 printk(KERN_ERR "cpm1_clock_setup: invalid clock combination\n");
501                 return -EINVAL;
502         }
503
504         bits <<= shift;
505         mask <<= shift;
506         out_be32(reg, (in_be32(reg) & ~mask) | bits);
507
508         return 0;
509 }
510
511 /*
512  * GPIO LIB API implementation
513  */
514 #ifdef CONFIG_8xx_GPIO
515
516 struct cpm1_gpio16_chip {
517         struct of_mm_gpio_chip mm_gc;
518         spinlock_t lock;
519
520         /* shadowed data register to clear/set bits safely */
521         u16 cpdata;
522 };
523
524 static inline struct cpm1_gpio16_chip *
525 to_cpm1_gpio16_chip(struct of_mm_gpio_chip *mm_gc)
526 {
527         return container_of(mm_gc, struct cpm1_gpio16_chip, mm_gc);
528 }
529
530 static void cpm1_gpio16_save_regs(struct of_mm_gpio_chip *mm_gc)
531 {
532         struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc);
533         struct cpm_ioport16 __iomem *iop = mm_gc->regs;
534
535         cpm1_gc->cpdata = in_be16(&iop->dat);
536 }
537
538 static int cpm1_gpio16_get(struct gpio_chip *gc, unsigned int gpio)
539 {
540         struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
541         struct cpm_ioport16 __iomem *iop = mm_gc->regs;
542         u16 pin_mask;
543
544         pin_mask = 1 << (15 - gpio);
545
546         return !!(in_be16(&iop->dat) & pin_mask);
547 }
548
549 static void __cpm1_gpio16_set(struct of_mm_gpio_chip *mm_gc, u16 pin_mask,
550         int value)
551 {
552         struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc);
553         struct cpm_ioport16 __iomem *iop = mm_gc->regs;
554
555         if (value)
556                 cpm1_gc->cpdata |= pin_mask;
557         else
558                 cpm1_gc->cpdata &= ~pin_mask;
559
560         out_be16(&iop->dat, cpm1_gc->cpdata);
561 }
562
563 static void cpm1_gpio16_set(struct gpio_chip *gc, unsigned int gpio, int value)
564 {
565         struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
566         struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc);
567         unsigned long flags;
568         u16 pin_mask = 1 << (15 - gpio);
569
570         spin_lock_irqsave(&cpm1_gc->lock, flags);
571
572         __cpm1_gpio16_set(mm_gc, pin_mask, value);
573
574         spin_unlock_irqrestore(&cpm1_gc->lock, flags);
575 }
576
577 static int cpm1_gpio16_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
578 {
579         struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
580         struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc);
581         struct cpm_ioport16 __iomem *iop = mm_gc->regs;
582         unsigned long flags;
583         u16 pin_mask = 1 << (15 - gpio);
584
585         spin_lock_irqsave(&cpm1_gc->lock, flags);
586
587         setbits16(&iop->dir, pin_mask);
588         __cpm1_gpio16_set(mm_gc, pin_mask, val);
589
590         spin_unlock_irqrestore(&cpm1_gc->lock, flags);
591
592         return 0;
593 }
594
595 static int cpm1_gpio16_dir_in(struct gpio_chip *gc, unsigned int gpio)
596 {
597         struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
598         struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc);
599         struct cpm_ioport16 __iomem *iop = mm_gc->regs;
600         unsigned long flags;
601         u16 pin_mask = 1 << (15 - gpio);
602
603         spin_lock_irqsave(&cpm1_gc->lock, flags);
604
605         clrbits16(&iop->dir, pin_mask);
606
607         spin_unlock_irqrestore(&cpm1_gc->lock, flags);
608
609         return 0;
610 }
611
612 int cpm1_gpiochip_add16(struct device_node *np)
613 {
614         struct cpm1_gpio16_chip *cpm1_gc;
615         struct of_mm_gpio_chip *mm_gc;
616         struct of_gpio_chip *of_gc;
617         struct gpio_chip *gc;
618
619         cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL);
620         if (!cpm1_gc)
621                 return -ENOMEM;
622
623         spin_lock_init(&cpm1_gc->lock);
624
625         mm_gc = &cpm1_gc->mm_gc;
626         of_gc = &mm_gc->of_gc;
627         gc = &of_gc->gc;
628
629         mm_gc->save_regs = cpm1_gpio16_save_regs;
630         of_gc->gpio_cells = 2;
631         gc->ngpio = 16;
632         gc->direction_input = cpm1_gpio16_dir_in;
633         gc->direction_output = cpm1_gpio16_dir_out;
634         gc->get = cpm1_gpio16_get;
635         gc->set = cpm1_gpio16_set;
636
637         return of_mm_gpiochip_add(np, mm_gc);
638 }
639
640 struct cpm1_gpio32_chip {
641         struct of_mm_gpio_chip mm_gc;
642         spinlock_t lock;
643
644         /* shadowed data register to clear/set bits safely */
645         u32 cpdata;
646 };
647
648 static inline struct cpm1_gpio32_chip *
649 to_cpm1_gpio32_chip(struct of_mm_gpio_chip *mm_gc)
650 {
651         return container_of(mm_gc, struct cpm1_gpio32_chip, mm_gc);
652 }
653
654 static void cpm1_gpio32_save_regs(struct of_mm_gpio_chip *mm_gc)
655 {
656         struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc);
657         struct cpm_ioport32b __iomem *iop = mm_gc->regs;
658
659         cpm1_gc->cpdata = in_be32(&iop->dat);
660 }
661
662 static int cpm1_gpio32_get(struct gpio_chip *gc, unsigned int gpio)
663 {
664         struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
665         struct cpm_ioport32b __iomem *iop = mm_gc->regs;
666         u32 pin_mask;
667
668         pin_mask = 1 << (31 - gpio);
669
670         return !!(in_be32(&iop->dat) & pin_mask);
671 }
672
673 static void __cpm1_gpio32_set(struct of_mm_gpio_chip *mm_gc, u32 pin_mask,
674         int value)
675 {
676         struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc);
677         struct cpm_ioport32b __iomem *iop = mm_gc->regs;
678
679         if (value)
680                 cpm1_gc->cpdata |= pin_mask;
681         else
682                 cpm1_gc->cpdata &= ~pin_mask;
683
684         out_be32(&iop->dat, cpm1_gc->cpdata);
685 }
686
687 static void cpm1_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
688 {
689         struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
690         struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc);
691         unsigned long flags;
692         u32 pin_mask = 1 << (31 - gpio);
693
694         spin_lock_irqsave(&cpm1_gc->lock, flags);
695
696         __cpm1_gpio32_set(mm_gc, pin_mask, value);
697
698         spin_unlock_irqrestore(&cpm1_gc->lock, flags);
699 }
700
701 static int cpm1_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
702 {
703         struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
704         struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc);
705         struct cpm_ioport32b __iomem *iop = mm_gc->regs;
706         unsigned long flags;
707         u32 pin_mask = 1 << (31 - gpio);
708
709         spin_lock_irqsave(&cpm1_gc->lock, flags);
710
711         setbits32(&iop->dir, pin_mask);
712         __cpm1_gpio32_set(mm_gc, pin_mask, val);
713
714         spin_unlock_irqrestore(&cpm1_gc->lock, flags);
715
716         return 0;
717 }
718
719 static int cpm1_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio)
720 {
721         struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
722         struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc);
723         struct cpm_ioport32b __iomem *iop = mm_gc->regs;
724         unsigned long flags;
725         u32 pin_mask = 1 << (31 - gpio);
726
727         spin_lock_irqsave(&cpm1_gc->lock, flags);
728
729         clrbits32(&iop->dir, pin_mask);
730
731         spin_unlock_irqrestore(&cpm1_gc->lock, flags);
732
733         return 0;
734 }
735
736 int cpm1_gpiochip_add32(struct device_node *np)
737 {
738         struct cpm1_gpio32_chip *cpm1_gc;
739         struct of_mm_gpio_chip *mm_gc;
740         struct of_gpio_chip *of_gc;
741         struct gpio_chip *gc;
742
743         cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL);
744         if (!cpm1_gc)
745                 return -ENOMEM;
746
747         spin_lock_init(&cpm1_gc->lock);
748
749         mm_gc = &cpm1_gc->mm_gc;
750         of_gc = &mm_gc->of_gc;
751         gc = &of_gc->gc;
752
753         mm_gc->save_regs = cpm1_gpio32_save_regs;
754         of_gc->gpio_cells = 2;
755         gc->ngpio = 32;
756         gc->direction_input = cpm1_gpio32_dir_in;
757         gc->direction_output = cpm1_gpio32_dir_out;
758         gc->get = cpm1_gpio32_get;
759         gc->set = cpm1_gpio32_set;
760
761         return of_mm_gpiochip_add(np, mm_gc);
762 }
763
764 static int cpm_init_par_io(void)
765 {
766         struct device_node *np;
767
768         for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-a")
769                 cpm1_gpiochip_add16(np);
770
771         for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-b")
772                 cpm1_gpiochip_add32(np);
773
774         for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-c")
775                 cpm1_gpiochip_add16(np);
776
777         for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-d")
778                 cpm1_gpiochip_add16(np);
779
780         /* Port E uses CPM2 layout */
781         for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-e")
782                 cpm2_gpiochip_add32(np);
783         return 0;
784 }
785 arch_initcall(cpm_init_par_io);
786
787 #endif /* CONFIG_8xx_GPIO */