2 * sleep.c - ACPI sleep support.
4 * Copyright (c) 2005 Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
5 * Copyright (c) 2004 David Shaohua Li <shaohua.li@intel.com>
6 * Copyright (c) 2000-2003 Patrick Mochel
7 * Copyright (c) 2003 Open Source Development Lab
9 * This file is released under the GPLv2.
13 #include <linux/delay.h>
14 #include <linux/irq.h>
15 #include <linux/dmi.h>
16 #include <linux/device.h>
17 #include <linux/suspend.h>
18 #include <acpi/acpi_bus.h>
19 #include <acpi/acpi_drivers.h>
22 u8 sleep_states[ACPI_S_STATE_COUNT];
24 static struct pm_ops acpi_pm_ops;
26 extern void do_suspend_lowlevel(void);
28 static u32 acpi_suspend_states[] = {
29 [PM_SUSPEND_ON] = ACPI_STATE_S0,
30 [PM_SUSPEND_STANDBY] = ACPI_STATE_S1,
31 [PM_SUSPEND_MEM] = ACPI_STATE_S3,
32 [PM_SUSPEND_DISK] = ACPI_STATE_S4,
33 [PM_SUSPEND_MAX] = ACPI_STATE_S5
36 static int init_8259A_after_S1;
39 * acpi_pm_prepare - Do preliminary suspend work.
40 * @pm_state: suspend state we're entering.
42 * Make sure we support the state. If we do, and we need it, set the
43 * firmware waking vector and do arch-specific nastiness to get the
44 * wakeup code to the waking vector.
47 extern int acpi_sleep_prepare(u32 acpi_state);
48 extern void acpi_power_off(void);
50 static int acpi_pm_prepare(suspend_state_t pm_state)
52 u32 acpi_state = acpi_suspend_states[pm_state];
54 if (!sleep_states[acpi_state]) {
55 printk("acpi_pm_prepare does not support %d \n", pm_state);
58 return acpi_sleep_prepare(acpi_state);
62 * acpi_pm_enter - Actually enter a sleep state.
63 * @pm_state: State we're entering.
65 * Flush caches and go to sleep. For STR or STD, we have to call
66 * arch-specific assembly, which in turn call acpi_enter_sleep_state().
67 * It's unfortunate, but it works. Please fix if you're feeling frisky.
70 static int acpi_pm_enter(suspend_state_t pm_state)
72 acpi_status status = AE_OK;
73 unsigned long flags = 0;
74 u32 acpi_state = acpi_suspend_states[pm_state];
76 ACPI_FLUSH_CPU_CACHE();
78 /* Do arch specific saving of state. */
79 if (pm_state > PM_SUSPEND_STANDBY) {
80 int error = acpi_save_state_mem();
85 local_irq_save(flags);
86 acpi_enable_wakeup_device(acpi_state);
88 case PM_SUSPEND_STANDBY:
90 status = acpi_enter_sleep_state(acpi_state);
94 do_suspend_lowlevel();
98 if (acpi_pm_ops.pm_disk_mode == PM_DISK_PLATFORM)
99 status = acpi_enter_sleep_state(acpi_state);
109 /* ACPI 3.0 specs (P62) says that it's the responsabilty
110 * of the OSPM to clear the status bit [ implying that the
111 * POWER_BUTTON event should not reach userspace ]
113 if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3))
114 acpi_clear_event(ACPI_EVENT_POWER_BUTTON);
116 local_irq_restore(flags);
117 printk(KERN_DEBUG "Back to C!\n");
119 /* restore processor state
120 * We should only be here if we're coming back from STR or STD.
121 * And, in the case of the latter, the memory image should have already
122 * been loaded from disk.
124 if (pm_state > PM_SUSPEND_STANDBY)
125 acpi_restore_state_mem();
127 return ACPI_SUCCESS(status) ? 0 : -EFAULT;
131 * acpi_pm_finish - Finish up suspend sequence.
132 * @pm_state: State we're coming out of.
134 * This is called after we wake back up (or if entering the sleep state
138 static int acpi_pm_finish(suspend_state_t pm_state)
140 u32 acpi_state = acpi_suspend_states[pm_state];
142 acpi_leave_sleep_state(acpi_state);
143 acpi_disable_wakeup_device(acpi_state);
145 /* reset firmware waking vector */
146 acpi_set_firmware_waking_vector((acpi_physical_address) 0);
148 if (init_8259A_after_S1) {
149 printk("Broken toshiba laptop -> kicking interrupts\n");
155 int acpi_suspend(u32 acpi_state)
157 suspend_state_t states[] = {
158 [1] = PM_SUSPEND_STANDBY,
159 [3] = PM_SUSPEND_MEM,
160 [4] = PM_SUSPEND_DISK,
164 if (acpi_state < 6 && states[acpi_state])
165 return pm_suspend(states[acpi_state]);
169 static int acpi_pm_state_valid(suspend_state_t pm_state)
171 u32 acpi_state = acpi_suspend_states[pm_state];
173 return sleep_states[acpi_state];
176 static struct pm_ops acpi_pm_ops = {
177 .valid = acpi_pm_state_valid,
178 .prepare = acpi_pm_prepare,
179 .enter = acpi_pm_enter,
180 .finish = acpi_pm_finish,
184 * Toshiba fails to preserve interrupts over S1, reinitialization
185 * of 8259 is needed after S1 resume.
187 static int __init init_ints_after_s1(struct dmi_system_id *d)
189 printk(KERN_WARNING "%s with broken S1 detected.\n", d->ident);
190 init_8259A_after_S1 = 1;
194 static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
196 .callback = init_ints_after_s1,
197 .ident = "Toshiba Satellite 4030cdt",
198 .matches = {DMI_MATCH(DMI_PRODUCT_NAME, "S4030CDT/4.3"),},
203 static int __init acpi_sleep_init(void)
207 dmi_check_system(acpisleep_dmi_table);
212 printk(KERN_INFO PREFIX "(supports");
213 for (i = 0; i < ACPI_S_STATE_COUNT; i++) {
216 status = acpi_get_sleep_type_data(i, &type_a, &type_b);
217 if (ACPI_SUCCESS(status)) {
221 if (i == ACPI_STATE_S4) {
223 acpi_pm_ops.pm_disk_mode = PM_DISK_PLATFORM;
228 pm_set_ops(&acpi_pm_ops);
232 late_initcall(acpi_sleep_init);