git.oblomov.eu Git - linux-2.6/blob - drivers/usb/misc/usbtest.c

   1 #include <linux/kernel.h>
   2 #include <linux/errno.h>
   3 #include <linux/init.h>
   4 #include <linux/slab.h>
   5 #include <linux/mm.h>
   6 #include <linux/module.h>
   7 #include <linux/moduleparam.h>
   8 #include <linux/scatterlist.h>
   9
  10 #include <linux/usb.h>
  11
  12
  13 /*-------------------------------------------------------------------------*/
  14
  15 // FIXME make these public somewhere; usbdevfs.h?
  16 //
  17 struct usbtest_param {
  18         // inputs
  19         unsigned                test_num;       /* 0..(TEST_CASES-1) */
  20         unsigned                iterations;
  21         unsigned                length;
  22         unsigned                vary;
  23         unsigned                sglen;
  24
  25         // outputs
  26         struct timeval          duration;
  27 };
  28 #define USBTEST_REQUEST _IOWR('U', 100, struct usbtest_param)
  29
  30 /*-------------------------------------------------------------------------*/
  31
  32 #define GENERIC         /* let probe() bind using module params */
  33
  34 /* Some devices that can be used for testing will have "real" drivers.
  35  * Entries for those need to be enabled here by hand, after disabling
  36  * that "real" driver.
  37  */
  38 //#define       IBOT2           /* grab iBOT2 webcams */
  39 //#define       KEYSPAN_19Qi    /* grab un-renumerated serial adapter */
  40
  41 /*-------------------------------------------------------------------------*/
  42
  43 struct usbtest_info {
  44         const char              *name;
  45         u8                      ep_in;          /* bulk/intr source */
  46         u8                      ep_out;         /* bulk/intr sink */
  47         unsigned                autoconf : 1;
  48         unsigned                ctrl_out : 1;
  49         unsigned                iso : 1;        /* try iso in/out */
  50         int                     alt;
  51 };
  52
  53 /* this is accessed only through usbfs ioctl calls.
  54  * one ioctl to issue a test ... one lock per device.
  55  * tests create other threads if they need them.
  56  * urbs and buffers are allocated dynamically,
  57  * and data generated deterministically.
  58  */
  59 struct usbtest_dev {
  60         struct usb_interface    *intf;
  61         struct usbtest_info     *info;
  62         int                     in_pipe;
  63         int                     out_pipe;
  64         int                     in_iso_pipe;
  65         int                     out_iso_pipe;
  66         struct usb_endpoint_descriptor  *iso_in, *iso_out;
  67         struct semaphore        sem;
  68
  69 #define TBUF_SIZE       256
  70         u8                      *buf;
  71 };
  72
  73 static struct usb_device *testdev_to_usbdev (struct usbtest_dev *test)
  74 {
  75         return interface_to_usbdev (test->intf);
  76 }
  77
  78 /* set up all urbs so they can be used with either bulk or interrupt */
  79 #define INTERRUPT_RATE          1       /* msec/transfer */
  80
  81 #define xprintk(tdev,level,fmt,args...) \
  82         dev_printk(level ,  &(tdev)->intf->dev ,  fmt ,  ## args)
  83
  84 #ifdef DEBUG
  85 #define DBG(dev,fmt,args...) \
  86         xprintk(dev , KERN_DEBUG , fmt , ## args)
  87 #else
  88 #define DBG(dev,fmt,args...) \
  89         do { } while (0)
  90 #endif /* DEBUG */
  91
  92 #ifdef VERBOSE
  93 #define VDBG DBG
  94 #else
  95 #define VDBG(dev,fmt,args...) \
  96         do { } while (0)
  97 #endif  /* VERBOSE */
  98
  99 #define ERROR(dev,fmt,args...) \
 100         xprintk(dev , KERN_ERR , fmt , ## args)
 101 #define WARN(dev,fmt,args...) \
 102         xprintk(dev , KERN_WARNING , fmt , ## args)
 103 #define INFO(dev,fmt,args...) \
 104         xprintk(dev , KERN_INFO , fmt , ## args)
 105
 106 /*-------------------------------------------------------------------------*/
 107
 108 static int
 109 get_endpoints (struct usbtest_dev *dev, struct usb_interface *intf)
 110 {
 111         int                             tmp;
 112         struct usb_host_interface       *alt;
 113         struct usb_host_endpoint        *in, *out;
 114         struct usb_host_endpoint        *iso_in, *iso_out;
 115         struct usb_device               *udev;
 116
 117         for (tmp = 0; tmp < intf->num_altsetting; tmp++) {
 118                 unsigned        ep;
 119
 120                 in = out = NULL;
 121                 iso_in = iso_out = NULL;
 122                 alt = intf->altsetting + tmp;
 123
 124                 /* take the first altsetting with in-bulk + out-bulk;
 125                  * ignore other endpoints and altsetttings.
 126                  */
 127                 for (ep = 0; ep < alt->desc.bNumEndpoints; ep++) {
 128                         struct usb_host_endpoint        *e;
 129
 130                         e = alt->endpoint + ep;
 131                         switch (e->desc.bmAttributes) {
 132                         case USB_ENDPOINT_XFER_BULK:
 133                                 break;
 134                         case USB_ENDPOINT_XFER_ISOC:
 135                                 if (dev->info->iso)
 136                                         goto try_iso;
 137                                 // FALLTHROUGH
 138                         default:
 139                                 continue;
 140                         }
 141                         if (usb_endpoint_dir_in(&e->desc)) {
 142                                 if (!in)
 143                                         in = e;
 144                         } else {
 145                                 if (!out)
 146                                         out = e;
 147                         }
 148                         continue;
 149 try_iso:
 150                         if (usb_endpoint_dir_in(&e->desc)) {
 151                                 if (!iso_in)
 152                                         iso_in = e;
 153                         } else {
 154                                 if (!iso_out)
 155                                         iso_out = e;
 156                         }
 157                 }
 158                 if ((in && out)  ||  (iso_in && iso_out))
 159                         goto found;
 160         }
 161         return -EINVAL;
 162
 163 found:
 164         udev = testdev_to_usbdev (dev);
 165         if (alt->desc.bAlternateSetting != 0) {
 166                 tmp = usb_set_interface (udev,
 167                                 alt->desc.bInterfaceNumber,
 168                                 alt->desc.bAlternateSetting);
 169                 if (tmp < 0)
 170                         return tmp;
 171         }
 172
 173         if (in) {
 174                 dev->in_pipe = usb_rcvbulkpipe (udev,
 175                         in->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
 176                 dev->out_pipe = usb_sndbulkpipe (udev,
 177                         out->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
 178         }
 179         if (iso_in) {
 180                 dev->iso_in = &iso_in->desc;
 181                 dev->in_iso_pipe = usb_rcvisocpipe (udev,
 182                                 iso_in->desc.bEndpointAddress
 183                                         & USB_ENDPOINT_NUMBER_MASK);
 184                 dev->iso_out = &iso_out->desc;
 185                 dev->out_iso_pipe = usb_sndisocpipe (udev,
 186                                 iso_out->desc.bEndpointAddress
 187                                         & USB_ENDPOINT_NUMBER_MASK);
 188         }
 189         return 0;
 190 }
 191
 192 /*-------------------------------------------------------------------------*/
 193
 194 /* Support for testing basic non-queued I/O streams.
 195  *
 196  * These just package urbs as requests that can be easily canceled.
 197  * Each urb's data buffer is dynamically allocated; callers can fill
 198  * them with non-zero test data (or test for it) when appropriate.
 199  */
 200
 201 static void simple_callback (struct urb *urb)
 202 {
 203         complete ((struct completion *) urb->context);
 204 }
 205
 206 static struct urb *simple_alloc_urb (
 207         struct usb_device       *udev,
 208         int                     pipe,
 209         unsigned long           bytes
 210 )
 211 {
 212         struct urb              *urb;
 213
 214         if (bytes < 0)
 215                 return NULL;
 216         urb = usb_alloc_urb (0, SLAB_KERNEL);
 217         if (!urb)
 218                 return urb;
 219         usb_fill_bulk_urb (urb, udev, pipe, NULL, bytes, simple_callback, NULL);
 220         urb->interval = (udev->speed == USB_SPEED_HIGH)
 221                         ? (INTERRUPT_RATE << 3)
 222                         : INTERRUPT_RATE;
 223         urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
 224         if (usb_pipein (pipe))
 225                 urb->transfer_flags |= URB_SHORT_NOT_OK;
 226         urb->transfer_buffer = usb_buffer_alloc (udev, bytes, SLAB_KERNEL,
 227                         &urb->transfer_dma);
 228         if (!urb->transfer_buffer) {
 229                 usb_free_urb (urb);
 230                 urb = NULL;
 231         } else
 232                 memset (urb->transfer_buffer, 0, bytes);
 233         return urb;
 234 }
 235
 236 static unsigned pattern = 0;
 237 module_param (pattern, uint, S_IRUGO);
 238 // MODULE_PARM_DESC (pattern, "i/o pattern (0 == zeroes)");
 239
 240 static inline void simple_fill_buf (struct urb *urb)
 241 {
 242         unsigned        i;
 243         u8              *buf = urb->transfer_buffer;
 244         unsigned        len = urb->transfer_buffer_length;
 245
 246         switch (pattern) {
 247         default:
 248                 // FALLTHROUGH
 249         case 0:
 250                 memset (buf, 0, len);
 251                 break;
 252         case 1:                 /* mod63 */
 253                 for (i = 0; i < len; i++)
 254                         *buf++ = (u8) (i % 63);
 255                 break;
 256         }
 257 }
 258
 259 static inline int simple_check_buf (struct urb *urb)
 260 {
 261         unsigned        i;
 262         u8              expected;
 263         u8              *buf = urb->transfer_buffer;
 264         unsigned        len = urb->actual_length;
 265
 266         for (i = 0; i < len; i++, buf++) {
 267                 switch (pattern) {
 268                 /* all-zeroes has no synchronization issues */
 269                 case 0:
 270                         expected = 0;
 271                         break;
 272                 /* mod63 stays in sync with short-terminated transfers,
 273                  * or otherwise when host and gadget agree on how large
 274                  * each usb transfer request should be.  resync is done
 275                  * with set_interface or set_config.
 276                  */
 277                 case 1:                 /* mod63 */
 278                         expected = i % 63;
 279                         break;
 280                 /* always fail unsupported patterns */
 281                 default:
 282                         expected = !*buf;
 283                         break;
 284                 }
 285                 if (*buf == expected)
 286                         continue;
 287                 dbg ("buf[%d] = %d (not %d)", i, *buf, expected);
 288                 return -EINVAL;
 289         }
 290         return 0;
 291 }
 292
 293 static void simple_free_urb (struct urb *urb)
 294 {
 295         usb_buffer_free (urb->dev, urb->transfer_buffer_length,
 296                         urb->transfer_buffer, urb->transfer_dma);
 297         usb_free_urb (urb);
 298 }
 299
 300 static int simple_io (
 301         struct urb              *urb,
 302         int                     iterations,
 303         int                     vary,
 304         int                     expected,
 305         const char              *label
 306 )
 307 {
 308         struct usb_device       *udev = urb->dev;
 309         int                     max = urb->transfer_buffer_length;
 310         struct completion       completion;
 311         int                     retval = 0;
 312
 313         urb->context = &completion;
 314         while (retval == 0 && iterations-- > 0) {
 315                 init_completion (&completion);
 316                 if (usb_pipeout (urb->pipe))
 317                         simple_fill_buf (urb);
 318                 if ((retval = usb_submit_urb (urb, SLAB_KERNEL)) != 0)
 319                         break;
 320
 321                 /* NOTE:  no timeouts; can't be broken out of by interrupt */
 322                 wait_for_completion (&completion);
 323                 retval = urb->status;
 324                 urb->dev = udev;
 325                 if (retval == 0 && usb_pipein (urb->pipe))
 326                         retval = simple_check_buf (urb);
 327
 328                 if (vary) {
 329                         int     len = urb->transfer_buffer_length;
 330
 331                         len += vary;
 332                         len %= max;
 333                         if (len == 0)
 334                                 len = (vary < max) ? vary : max;
 335                         urb->transfer_buffer_length = len;
 336                 }
 337
 338                 /* FIXME if endpoint halted, clear halt (and log) */
 339         }
 340         urb->transfer_buffer_length = max;
 341
 342         if (expected != retval)
 343                 dev_dbg (&udev->dev,
 344                         "%s failed, iterations left %d, status %d (not %d)\n",
 345                                 label, iterations, retval, expected);
 346         return retval;
 347 }
 348
 349
 350 /*-------------------------------------------------------------------------*/
 351
 352 /* We use scatterlist primitives to test queued I/O.
 353  * Yes, this also tests the scatterlist primitives.
 354  */
 355
 356 static void free_sglist (struct scatterlist *sg, int nents)
 357 {
 358         unsigned                i;
 359
 360         if (!sg)
 361                 return;
 362         for (i = 0; i < nents; i++) {
 363                 if (!sg [i].page)
 364                         continue;
 365                 kfree (page_address (sg [i].page) + sg [i].offset);
 366         }
 367         kfree (sg);
 368 }
 369
 370 static struct scatterlist *
 371 alloc_sglist (int nents, int max, int vary)
 372 {
 373         struct scatterlist      *sg;
 374         unsigned                i;
 375         unsigned                size = max;
 376
 377         sg = kmalloc (nents * sizeof *sg, SLAB_KERNEL);
 378         if (!sg)
 379                 return NULL;
 380
 381         for (i = 0; i < nents; i++) {
 382                 char            *buf;
 383                 unsigned        j;
 384
 385                 buf = kzalloc (size, SLAB_KERNEL);
 386                 if (!buf) {
 387                         free_sglist (sg, i);
 388                         return NULL;
 389                 }
 390
 391                 /* kmalloc pages are always physically contiguous! */
 392                 sg_init_one(&sg[i], buf, size);
 393
 394                 switch (pattern) {
 395                 case 0:
 396                         /* already zeroed */
 397                         break;
 398                 case 1:
 399                         for (j = 0; j < size; j++)
 400                                 *buf++ = (u8) (j % 63);
 401                         break;
 402                 }
 403
 404                 if (vary) {
 405                         size += vary;
 406                         size %= max;
 407                         if (size == 0)
 408                                 size = (vary < max) ? vary : max;
 409                 }
 410         }
 411
 412         return sg;
 413 }
 414
 415 static int perform_sglist (
 416         struct usb_device       *udev,
 417         unsigned                iterations,
 418         int                     pipe,
 419         struct usb_sg_request   *req,
 420         struct scatterlist      *sg,
 421         int                     nents
 422 )
 423 {
 424         int                     retval = 0;
 425
 426         while (retval == 0 && iterations-- > 0) {
 427                 retval = usb_sg_init (req, udev, pipe,
 428                                 (udev->speed == USB_SPEED_HIGH)
 429                                         ? (INTERRUPT_RATE << 3)
 430                                         : INTERRUPT_RATE,
 431                                 sg, nents, 0, SLAB_KERNEL);
 432
 433                 if (retval)
 434                         break;
 435                 usb_sg_wait (req);
 436                 retval = req->status;
 437
 438                 /* FIXME check resulting data pattern */
 439
 440                 /* FIXME if endpoint halted, clear halt (and log) */
 441         }
 442
 443         // FIXME for unlink or fault handling tests, don't report
 444         // failure if retval is as we expected ...
 445
 446         if (retval)
 447                 dbg ("perform_sglist failed, iterations left %d, status %d",
 448                                 iterations, retval);
 449         return retval;
 450 }
 451
 452
 453 /*-------------------------------------------------------------------------*/
 454
 455 /* unqueued control message testing
 456  *
 457  * there's a nice set of device functional requirements in chapter 9 of the
 458  * usb 2.0 spec, which we can apply to ANY device, even ones that don't use
 459  * special test firmware.
 460  *
 461  * we know the device is configured (or suspended) by the time it's visible
 462  * through usbfs.  we can't change that, so we won't test enumeration (which
 463  * worked 'well enough' to get here, this time), power management (ditto),
 464  * or remote wakeup (which needs human interaction).
 465  */
 466
 467 static unsigned realworld = 1;
 468 module_param (realworld, uint, 0);
 469 MODULE_PARM_DESC (realworld, "clear to demand stricter spec compliance");
 470
 471 static int get_altsetting (struct usbtest_dev *dev)
 472 {
 473         struct usb_interface    *iface = dev->intf;
 474         struct usb_device       *udev = interface_to_usbdev (iface);
 475         int                     retval;
 476
 477         retval = usb_control_msg (udev, usb_rcvctrlpipe (udev, 0),
 478                         USB_REQ_GET_INTERFACE, USB_DIR_IN|USB_RECIP_INTERFACE,
 479                         0, iface->altsetting [0].desc.bInterfaceNumber,
 480                         dev->buf, 1, USB_CTRL_GET_TIMEOUT);
 481         switch (retval) {
 482         case 1:
 483                 return dev->buf [0];
 484         case 0:
 485                 retval = -ERANGE;
 486                 // FALLTHROUGH
 487         default:
 488                 return retval;
 489         }
 490 }
 491
 492 static int set_altsetting (struct usbtest_dev *dev, int alternate)
 493 {
 494         struct usb_interface            *iface = dev->intf;
 495         struct usb_device               *udev;
 496
 497         if (alternate < 0 || alternate >= 256)
 498                 return -EINVAL;
 499
 500         udev = interface_to_usbdev (iface);
 501         return usb_set_interface (udev,
 502                         iface->altsetting [0].desc.bInterfaceNumber,
 503                         alternate);
 504 }
 505
 506 static int is_good_config (char *buf, int len)
 507 {
 508         struct usb_config_descriptor    *config;
 509
 510         if (len < sizeof *config)
 511                 return 0;
 512         config = (struct usb_config_descriptor *) buf;
 513
 514         switch (config->bDescriptorType) {
 515         case USB_DT_CONFIG:
 516         case USB_DT_OTHER_SPEED_CONFIG:
 517                 if (config->bLength != 9) {
 518                         dbg ("bogus config descriptor length");
 519                         return 0;
 520                 }
 521                 /* this bit 'must be 1' but often isn't */
 522                 if (!realworld && !(config->bmAttributes & 0x80)) {
 523                         dbg ("high bit of config attributes not set");
 524                         return 0;
 525                 }
 526                 if (config->bmAttributes & 0x1f) {      /* reserved == 0 */
 527                         dbg ("reserved config bits set");
 528                         return 0;
 529                 }
 530                 break;
 531         default:
 532                 return 0;
 533         }
 534
 535         if (le16_to_cpu(config->wTotalLength) == len)           /* read it all */
 536                 return 1;
 537         if (le16_to_cpu(config->wTotalLength) >= TBUF_SIZE)             /* max partial read */
 538                 return 1;
 539         dbg ("bogus config descriptor read size");
 540         return 0;
 541 }
 542
 543 /* sanity test for standard requests working with usb_control_mesg() and some
 544  * of the utility functions which use it.
 545  *
 546  * this doesn't test how endpoint halts behave or data toggles get set, since
 547  * we won't do I/O to bulk/interrupt endpoints here (which is how to change
 548  * halt or toggle).  toggle testing is impractical without support from hcds.
 549  *
 550  * this avoids failing devices linux would normally work with, by not testing
 551  * config/altsetting operations for devices that only support their defaults.
 552  * such devices rarely support those needless operations.
 553  *
 554  * NOTE that since this is a sanity test, it's not examining boundary cases
 555  * to see if usbcore, hcd, and device all behave right.  such testing would
 556  * involve varied read sizes and other operation sequences.
 557  */
 558 static int ch9_postconfig (struct usbtest_dev *dev)
 559 {
 560         struct usb_interface    *iface = dev->intf;
 561         struct usb_device       *udev = interface_to_usbdev (iface);
 562         int                     i, alt, retval;
 563
 564         /* [9.2.3] if there's more than one altsetting, we need to be able to
 565          * set and get each one.  mostly trusts the descriptors from usbcore.
 566          */
 567         for (i = 0; i < iface->num_altsetting; i++) {
 568
 569                 /* 9.2.3 constrains the range here */
 570                 alt = iface->altsetting [i].desc.bAlternateSetting;
 571                 if (alt < 0 || alt >= iface->num_altsetting) {
 572                         dev_dbg (&iface->dev,
 573                                         "invalid alt [%d].bAltSetting = %d\n",
 574                                         i, alt);
 575                 }
 576
 577                 /* [real world] get/set unimplemented if there's only one */
 578                 if (realworld && iface->num_altsetting == 1)
 579                         continue;
 580
 581                 /* [9.4.10] set_interface */
 582                 retval = set_altsetting (dev, alt);
 583                 if (retval) {
 584                         dev_dbg (&iface->dev, "can't set_interface = %d, %d\n",
 585                                         alt, retval);
 586                         return retval;
 587                 }
 588
 589                 /* [9.4.4] get_interface always works */
 590                 retval = get_altsetting (dev);
 591                 if (retval != alt) {
 592                         dev_dbg (&iface->dev, "get alt should be %d, was %d\n",
 593                                         alt, retval);
 594                         return (retval < 0) ? retval : -EDOM;
 595                 }
 596
 597         }
 598
 599         /* [real world] get_config unimplemented if there's only one */
 600         if (!realworld || udev->descriptor.bNumConfigurations != 1) {
 601                 int     expected = udev->actconfig->desc.bConfigurationValue;
 602
 603                 /* [9.4.2] get_configuration always works
 604                  * ... although some cheap devices (like one TI Hub I've got)
 605                  * won't return config descriptors except before set_config.
 606                  */
 607                 retval = usb_control_msg (udev, usb_rcvctrlpipe (udev, 0),
 608                                 USB_REQ_GET_CONFIGURATION,
 609                                 USB_DIR_IN | USB_RECIP_DEVICE,
 610                                 0, 0, dev->buf, 1, USB_CTRL_GET_TIMEOUT);
 611                 if (retval != 1 || dev->buf [0] != expected) {
 612                         dev_dbg (&iface->dev, "get config --> %d %d (1 %d)\n",
 613                                 retval, dev->buf[0], expected);
 614                         return (retval < 0) ? retval : -EDOM;
 615                 }
 616         }
 617
 618         /* there's always [9.4.3] a device descriptor [9.6.1] */
 619         retval = usb_get_descriptor (udev, USB_DT_DEVICE, 0,
 620                         dev->buf, sizeof udev->descriptor);
 621         if (retval != sizeof udev->descriptor) {
 622                 dev_dbg (&iface->dev, "dev descriptor --> %d\n", retval);
 623                 return (retval < 0) ? retval : -EDOM;
 624         }
 625
 626         /* there's always [9.4.3] at least one config descriptor [9.6.3] */
 627         for (i = 0; i < udev->descriptor.bNumConfigurations; i++) {
 628                 retval = usb_get_descriptor (udev, USB_DT_CONFIG, i,
 629                                 dev->buf, TBUF_SIZE);
 630                 if (!is_good_config (dev->buf, retval)) {
 631                         dev_dbg (&iface->dev,
 632                                         "config [%d] descriptor --> %d\n",
 633                                         i, retval);
 634                         return (retval < 0) ? retval : -EDOM;
 635                 }
 636
 637                 // FIXME cross-checking udev->config[i] to make sure usbcore
 638                 // parsed it right (etc) would be good testing paranoia
 639         }
 640
 641         /* and sometimes [9.2.6.6] speed dependent descriptors */
 642         if (le16_to_cpu(udev->descriptor.bcdUSB) == 0x0200) {
 643                 struct usb_qualifier_descriptor         *d = NULL;
 644
 645                 /* device qualifier [9.6.2] */
 646                 retval = usb_get_descriptor (udev,
 647                                 USB_DT_DEVICE_QUALIFIER, 0, dev->buf,
 648                                 sizeof (struct usb_qualifier_descriptor));
 649                 if (retval == -EPIPE) {
 650                         if (udev->speed == USB_SPEED_HIGH) {
 651                                 dev_dbg (&iface->dev,
 652                                                 "hs dev qualifier --> %d\n",
 653                                                 retval);
 654                                 return (retval < 0) ? retval : -EDOM;
 655                         }
 656                         /* usb2.0 but not high-speed capable; fine */
 657                 } else if (retval != sizeof (struct usb_qualifier_descriptor)) {
 658                         dev_dbg (&iface->dev, "dev qualifier --> %d\n", retval);
 659                         return (retval < 0) ? retval : -EDOM;
 660                 } else
 661                         d = (struct usb_qualifier_descriptor *) dev->buf;
 662
 663                 /* might not have [9.6.2] any other-speed configs [9.6.4] */
 664                 if (d) {
 665                         unsigned max = d->bNumConfigurations;
 666                         for (i = 0; i < max; i++) {
 667                                 retval = usb_get_descriptor (udev,
 668                                         USB_DT_OTHER_SPEED_CONFIG, i,
 669                                         dev->buf, TBUF_SIZE);
 670                                 if (!is_good_config (dev->buf, retval)) {
 671                                         dev_dbg (&iface->dev,
 672                                                 "other speed config --> %d\n",
 673                                                 retval);
 674                                         return (retval < 0) ? retval : -EDOM;
 675                                 }
 676                         }
 677                 }
 678         }
 679         // FIXME fetch strings from at least the device descriptor
 680
 681         /* [9.4.5] get_status always works */
 682         retval = usb_get_status (udev, USB_RECIP_DEVICE, 0, dev->buf);
 683         if (retval != 2) {
 684                 dev_dbg (&iface->dev, "get dev status --> %d\n", retval);
 685                 return (retval < 0) ? retval : -EDOM;
 686         }
 687
 688         // FIXME configuration.bmAttributes says if we could try to set/clear
 689         // the device's remote wakeup feature ... if we can, test that here
 690
 691         retval = usb_get_status (udev, USB_RECIP_INTERFACE,
 692                         iface->altsetting [0].desc.bInterfaceNumber, dev->buf);
 693         if (retval != 2) {
 694                 dev_dbg (&iface->dev, "get interface status --> %d\n", retval);
 695                 return (retval < 0) ? retval : -EDOM;
 696         }
 697         // FIXME get status for each endpoint in the interface
 698
 699         return 0;
 700 }
 701
 702 /*-------------------------------------------------------------------------*/
 703
 704 /* use ch9 requests to test whether:
 705  *   (a) queues work for control, keeping N subtests queued and
 706  *       active (auto-resubmit) for M loops through the queue.
 707  *   (b) protocol stalls (control-only) will autorecover.
 708  *       it's not like bulk/intr; no halt clearing.
 709  *   (c) short control reads are reported and handled.
 710  *   (d) queues are always processed in-order
 711  */
 712
 713 struct ctrl_ctx {
 714         spinlock_t              lock;
 715         struct usbtest_dev      *dev;
 716         struct completion       complete;
 717         unsigned                count;
 718         unsigned                pending;
 719         int                     status;
 720         struct urb              **urb;
 721         struct usbtest_param    *param;
 722         int                     last;
 723 };
 724
 725 #define NUM_SUBCASES    15              /* how many test subcases here? */
 726
 727 struct subcase {
 728         struct usb_ctrlrequest  setup;
 729         int                     number;
 730         int                     expected;
 731 };
 732
 733 static void ctrl_complete (struct urb *urb)
 734 {
 735         struct ctrl_ctx         *ctx = urb->context;
 736         struct usb_ctrlrequest  *reqp;
 737         struct subcase          *subcase;
 738         int                     status = urb->status;
 739
 740         reqp = (struct usb_ctrlrequest *)urb->setup_packet;
 741         subcase = container_of (reqp, struct subcase, setup);
 742
 743         spin_lock (&ctx->lock);
 744         ctx->count--;
 745         ctx->pending--;
 746
 747         /* queue must transfer and complete in fifo order, unless
 748          * usb_unlink_urb() is used to unlink something not at the
 749          * physical queue head (not tested).
 750          */
 751         if (subcase->number > 0) {
 752                 if ((subcase->number - ctx->last) != 1) {
 753                         dbg ("subcase %d completed out of order, last %d",
 754                                         subcase->number, ctx->last);
 755                         status = -EDOM;
 756                         ctx->last = subcase->number;
 757                         goto error;
 758                 }
 759         }
 760         ctx->last = subcase->number;
 761
 762         /* succeed or fault in only one way? */
 763         if (status == subcase->expected)
 764                 status = 0;
 765
 766         /* async unlink for cleanup? */
 767         else if (status != -ECONNRESET) {
 768
 769                 /* some faults are allowed, not required */
 770                 if (subcase->expected > 0 && (
 771                           ((urb->status == -subcase->expected   /* happened */
 772                            || urb->status == 0))))              /* didn't */
 773                         status = 0;
 774                 /* sometimes more than one fault is allowed */
 775                 else if (subcase->number == 12 && status == -EPIPE)
 776                         status = 0;
 777                 else
 778                         dbg ("subtest %d error, status %d",
 779                                         subcase->number, status);
 780         }
 781
 782         /* unexpected status codes mean errors; ideally, in hardware */
 783         if (status) {
 784 error:
 785                 if (ctx->status == 0) {
 786                         int             i;
 787
 788                         ctx->status = status;
 789                         info ("control queue %02x.%02x, err %d, %d left",
 790                                         reqp->bRequestType, reqp->bRequest,
 791                                         status, ctx->count);
 792
 793                         /* FIXME this "unlink everything" exit route should
 794                          * be a separate test case.
 795                          */
 796
 797                         /* unlink whatever's still pending */
 798                         for (i = 1; i < ctx->param->sglen; i++) {
 799                                 struct urb      *u = ctx->urb [
 800         (i + subcase->number) % ctx->param->sglen];
 801
 802                                 if (u == urb || !u->dev)
 803                                         continue;
 804                                 spin_unlock(&ctx->lock);
 805                                 status = usb_unlink_urb (u);
 806                                 spin_lock(&ctx->lock);
 807                                 switch (status) {
 808                                 case -EINPROGRESS:
 809                                 case -EBUSY:
 810                                 case -EIDRM:
 811                                         continue;
 812                                 default:
 813                                         dbg ("urb unlink --> %d", status);
 814                                 }
 815                         }
 816                         status = ctx->status;
 817                 }
 818         }
 819
 820         /* resubmit if we need to, else mark this as done */
 821         if ((status == 0) && (ctx->pending < ctx->count)) {
 822                 if ((status = usb_submit_urb (urb, SLAB_ATOMIC)) != 0) {
 823                         dbg ("can't resubmit ctrl %02x.%02x, err %d",
 824                                 reqp->bRequestType, reqp->bRequest, status);
 825                         urb->dev = NULL;
 826                 } else
 827                         ctx->pending++;
 828         } else
 829                 urb->dev = NULL;
 830
 831         /* signal completion when nothing's queued */
 832         if (ctx->pending == 0)
 833                 complete (&ctx->complete);
 834         spin_unlock (&ctx->lock);
 835 }
 836
 837 static int
 838 test_ctrl_queue (struct usbtest_dev *dev, struct usbtest_param *param)
 839 {
 840         struct usb_device       *udev = testdev_to_usbdev (dev);
 841         struct urb              **urb;
 842         struct ctrl_ctx         context;
 843         int                     i;
 844
 845         spin_lock_init (&context.lock);
 846         context.dev = dev;
 847         init_completion (&context.complete);
 848         context.count = param->sglen * param->iterations;
 849         context.pending = 0;
 850         context.status = -ENOMEM;
 851         context.param = param;
 852         context.last = -1;
 853
 854         /* allocate and init the urbs we'll queue.
 855          * as with bulk/intr sglists, sglen is the queue depth; it also
 856          * controls which subtests run (more tests than sglen) or rerun.
 857          */
 858         urb = kcalloc(param->sglen, sizeof(struct urb *), SLAB_KERNEL);
 859         if (!urb)
 860                 return -ENOMEM;
 861         for (i = 0; i < param->sglen; i++) {
 862                 int                     pipe = usb_rcvctrlpipe (udev, 0);
 863                 unsigned                len;
 864                 struct urb              *u;
 865                 struct usb_ctrlrequest  req;
 866                 struct subcase          *reqp;
 867                 int                     expected = 0;
 868
 869                 /* requests here are mostly expected to succeed on any
 870                  * device, but some are chosen to trigger protocol stalls
 871                  * or short reads.
 872                  */
 873                 memset (&req, 0, sizeof req);
 874                 req.bRequest = USB_REQ_GET_DESCRIPTOR;
 875                 req.bRequestType = USB_DIR_IN|USB_RECIP_DEVICE;
 876
 877                 switch (i % NUM_SUBCASES) {
 878                 case 0:         // get device descriptor
 879                         req.wValue = cpu_to_le16 (USB_DT_DEVICE << 8);
 880                         len = sizeof (struct usb_device_descriptor);
 881                         break;
 882                 case 1:         // get first config descriptor (only)
 883                         req.wValue = cpu_to_le16 ((USB_DT_CONFIG << 8) | 0);
 884                         len = sizeof (struct usb_config_descriptor);
 885                         break;
 886                 case 2:         // get altsetting (OFTEN STALLS)
 887                         req.bRequest = USB_REQ_GET_INTERFACE;
 888                         req.bRequestType = USB_DIR_IN|USB_RECIP_INTERFACE;
 889                         // index = 0 means first interface
 890                         len = 1;
 891                         expected = EPIPE;
 892                         break;
 893                 case 3:         // get interface status
 894                         req.bRequest = USB_REQ_GET_STATUS;
 895                         req.bRequestType = USB_DIR_IN|USB_RECIP_INTERFACE;
 896                         // interface 0
 897                         len = 2;
 898                         break;
 899                 case 4:         // get device status
 900                         req.bRequest = USB_REQ_GET_STATUS;
 901                         req.bRequestType = USB_DIR_IN|USB_RECIP_DEVICE;
 902                         len = 2;
 903                         break;
 904                 case 5:         // get device qualifier (MAY STALL)
 905                         req.wValue = cpu_to_le16 (USB_DT_DEVICE_QUALIFIER << 8);
 906                         len = sizeof (struct usb_qualifier_descriptor);
 907                         if (udev->speed != USB_SPEED_HIGH)
 908                                 expected = EPIPE;
 909                         break;
 910                 case 6:         // get first config descriptor, plus interface
 911                         req.wValue = cpu_to_le16 ((USB_DT_CONFIG << 8) | 0);
 912                         len = sizeof (struct usb_config_descriptor);
 913                         len += sizeof (struct usb_interface_descriptor);
 914                         break;
 915                 case 7:         // get interface descriptor (ALWAYS STALLS)
 916                         req.wValue = cpu_to_le16 (USB_DT_INTERFACE << 8);
 917                         // interface == 0
 918                         len = sizeof (struct usb_interface_descriptor);
 919                         expected = EPIPE;
 920                         break;
 921                 // NOTE: two consecutive stalls in the queue here.
 922                 // that tests fault recovery a bit more aggressively.
 923                 case 8:         // clear endpoint halt (USUALLY STALLS)
 924                         req.bRequest = USB_REQ_CLEAR_FEATURE;
 925                         req.bRequestType = USB_RECIP_ENDPOINT;
 926                         // wValue 0 == ep halt
 927                         // wIndex 0 == ep0 (shouldn't halt!)
 928                         len = 0;
 929                         pipe = usb_sndctrlpipe (udev, 0);
 930                         expected = EPIPE;
 931                         break;
 932                 case 9:         // get endpoint status
 933                         req.bRequest = USB_REQ_GET_STATUS;
 934                         req.bRequestType = USB_DIR_IN|USB_RECIP_ENDPOINT;
 935                         // endpoint 0
 936                         len = 2;
 937                         break;
 938                 case 10:        // trigger short read (EREMOTEIO)
 939                         req.wValue = cpu_to_le16 ((USB_DT_CONFIG << 8) | 0);
 940                         len = 1024;
 941                         expected = -EREMOTEIO;
 942                         break;
 943                 // NOTE: two consecutive _different_ faults in the queue.
 944                 case 11:        // get endpoint descriptor (ALWAYS STALLS)
 945                         req.wValue = cpu_to_le16 (USB_DT_ENDPOINT << 8);
 946                         // endpoint == 0
 947                         len = sizeof (struct usb_interface_descriptor);
 948                         expected = EPIPE;
 949                         break;
 950                 // NOTE: sometimes even a third fault in the queue!
 951                 case 12:        // get string 0 descriptor (MAY STALL)
 952                         req.wValue = cpu_to_le16 (USB_DT_STRING << 8);
 953                         // string == 0, for language IDs
 954                         len = sizeof (struct usb_interface_descriptor);
 955                         // may succeed when > 4 languages
 956                         expected = EREMOTEIO;   // or EPIPE, if no strings
 957                         break;
 958                 case 13:        // short read, resembling case 10
 959                         req.wValue = cpu_to_le16 ((USB_DT_CONFIG << 8) | 0);
 960                         // last data packet "should" be DATA1, not DATA0
 961                         len = 1024 - udev->descriptor.bMaxPacketSize0;
 962                         expected = -EREMOTEIO;
 963                         break;
 964                 case 14:        // short read; try to fill the last packet
 965                         req.wValue = cpu_to_le16 ((USB_DT_DEVICE << 8) | 0);
 966                         // device descriptor size == 18 bytes
 967                         len = udev->descriptor.bMaxPacketSize0;
 968                         switch (len) {
 969                         case 8:         len = 24; break;
 970                         case 16:        len = 32; break;
 971                         }
 972                         expected = -EREMOTEIO;
 973                         break;
 974                 default:
 975                         err ("bogus number of ctrl queue testcases!");
 976                         context.status = -EINVAL;
 977                         goto cleanup;
 978                 }
 979                 req.wLength = cpu_to_le16 (len);
 980                 urb [i] = u = simple_alloc_urb (udev, pipe, len);
 981                 if (!u)
 982                         goto cleanup;
 983
 984                 reqp = usb_buffer_alloc (udev, sizeof *reqp, SLAB_KERNEL,
 985                                 &u->setup_dma);
 986                 if (!reqp)
 987                         goto cleanup;
 988                 reqp->setup = req;
 989                 reqp->number = i % NUM_SUBCASES;
 990                 reqp->expected = expected;
 991                 u->setup_packet = (char *) &reqp->setup;
 992                 u->transfer_flags |= URB_NO_SETUP_DMA_MAP;
 993
 994                 u->context = &context;
 995                 u->complete = ctrl_complete;
 996         }
 997
 998         /* queue the urbs */
 999         context.urb = urb;
1000         spin_lock_irq (&context.lock);
1001         for (i = 0; i < param->sglen; i++) {
1002                 context.status = usb_submit_urb (urb [i], SLAB_ATOMIC);
1003                 if (context.status != 0) {
1004                         dbg ("can't submit urb[%d], status %d",
1005                                         i, context.status);
1006                         context.count = context.pending;
1007                         break;
1008                 }
1009                 context.pending++;
1010         }
1011         spin_unlock_irq (&context.lock);
1012
1013         /* FIXME  set timer and time out; provide a disconnect hook */
1014
1015         /* wait for the last one to complete */
1016         if (context.pending > 0)
1017                 wait_for_completion (&context.complete);
1018
1019 cleanup:
1020         for (i = 0; i < param->sglen; i++) {
1021                 if (!urb [i])
1022                         continue;
1023                 urb [i]->dev = udev;
1024                 if (urb [i]->setup_packet)
1025                         usb_buffer_free (udev, sizeof (struct usb_ctrlrequest),
1026                                         urb [i]->setup_packet,
1027                                         urb [i]->setup_dma);
1028                 simple_free_urb (urb [i]);
1029         }
1030         kfree (urb);
1031         return context.status;
1032 }
1033 #undef NUM_SUBCASES
1034
1035
1036 /*-------------------------------------------------------------------------*/
1037
1038 static void unlink1_callback (struct urb *urb)
1039 {
1040         int     status = urb->status;
1041
1042         // we "know" -EPIPE (stall) never happens
1043         if (!status)
1044                 status = usb_submit_urb (urb, SLAB_ATOMIC);
1045         if (status) {
1046                 urb->status = status;
1047                 complete ((struct completion *) urb->context);
1048         }
1049 }
1050
1051 static int unlink1 (struct usbtest_dev *dev, int pipe, int size, int async)
1052 {
1053         struct urb              *urb;
1054         struct completion       completion;
1055         int                     retval = 0;
1056
1057         init_completion (&completion);
1058         urb = simple_alloc_urb (testdev_to_usbdev (dev), pipe, size);
1059         if (!urb)
1060                 return -ENOMEM;
1061         urb->context = &completion;
1062         urb->complete = unlink1_callback;
1063
1064         /* keep the endpoint busy.  there are lots of hc/hcd-internal
1065          * states, and testing should get to all of them over time.
1066          *
1067          * FIXME want additional tests for when endpoint is STALLing
1068          * due to errors, or is just NAKing requests.
1069          */
1070         if ((retval = usb_submit_urb (urb, SLAB_KERNEL)) != 0) {
1071                 dev_dbg (&dev->intf->dev, "submit fail %d\n", retval);
1072                 return retval;
1073         }
1074
1075         /* unlinking that should always work.  variable delay tests more
1076          * hcd states and code paths, even with little other system load.
1077          */
1078         msleep (jiffies % (2 * INTERRUPT_RATE));
1079         if (async) {
1080 retry:
1081                 retval = usb_unlink_urb (urb);
1082                 if (retval == -EBUSY || retval == -EIDRM) {
1083                         /* we can't unlink urbs while they're completing.
1084                          * or if they've completed, and we haven't resubmitted.
1085                          * "normal" drivers would prevent resubmission, but
1086                          * since we're testing unlink paths, we can't.
1087                          */
1088                         dev_dbg (&dev->intf->dev, "unlink retry\n");
1089                         goto retry;
1090                 }
1091         } else
1092                 usb_kill_urb (urb);
1093         if (!(retval == 0 || retval == -EINPROGRESS)) {
1094                 dev_dbg (&dev->intf->dev, "unlink fail %d\n", retval);
1095                 return retval;
1096         }
1097
1098         wait_for_completion (&completion);
1099         retval = urb->status;
1100         simple_free_urb (urb);
1101
1102         if (async)
1103                 return (retval == -ECONNRESET) ? 0 : retval - 1000;
1104         else
1105                 return (retval == -ENOENT || retval == -EPERM) ?
1106                                 0 : retval - 2000;
1107 }
1108
1109 static int unlink_simple (struct usbtest_dev *dev, int pipe, int len)
1110 {
1111         int                     retval = 0;
1112
1113         /* test sync and async paths */
1114         retval = unlink1 (dev, pipe, len, 1);
1115         if (!retval)
1116                 retval = unlink1 (dev, pipe, len, 0);
1117         return retval;
1118 }
1119
1120 /*-------------------------------------------------------------------------*/
1121
1122 static int verify_not_halted (int ep, struct urb *urb)
1123 {
1124         int     retval;
1125         u16     status;
1126
1127         /* shouldn't look or act halted */
1128         retval = usb_get_status (urb->dev, USB_RECIP_ENDPOINT, ep, &status);
1129         if (retval < 0) {
1130                 dbg ("ep %02x couldn't get no-halt status, %d", ep, retval);
1131                 return retval;
1132         }
1133         if (status != 0) {
1134                 dbg ("ep %02x bogus status: %04x != 0", ep, status);
1135                 return -EINVAL;
1136         }
1137         retval = simple_io (urb, 1, 0, 0, __FUNCTION__);
1138         if (retval != 0)
1139                 return -EINVAL;
1140         return 0;
1141 }
1142
1143 static int verify_halted (int ep, struct urb *urb)
1144 {
1145         int     retval;
1146         u16     status;
1147
1148         /* should look and act halted */
1149         retval = usb_get_status (urb->dev, USB_RECIP_ENDPOINT, ep, &status);
1150         if (retval < 0) {
1151                 dbg ("ep %02x couldn't get halt status, %d", ep, retval);
1152                 return retval;
1153         }
1154         if (status != 1) {
1155                 dbg ("ep %02x bogus status: %04x != 1", ep, status);
1156                 return -EINVAL;
1157         }
1158         retval = simple_io (urb, 1, 0, -EPIPE, __FUNCTION__);
1159         if (retval != -EPIPE)
1160                 return -EINVAL;
1161         retval = simple_io (urb, 1, 0, -EPIPE, "verify_still_halted");
1162         if (retval != -EPIPE)
1163                 return -EINVAL;
1164         return 0;
1165 }
1166
1167 static int test_halt (int ep, struct urb *urb)
1168 {
1169         int     retval;
1170
1171         /* shouldn't look or act halted now */
1172         retval = verify_not_halted (ep, urb);
1173         if (retval < 0)
1174                 return retval;
1175
1176         /* set halt (protocol test only), verify it worked */
1177         retval = usb_control_msg (urb->dev, usb_sndctrlpipe (urb->dev, 0),
1178                         USB_REQ_SET_FEATURE, USB_RECIP_ENDPOINT,
1179                         USB_ENDPOINT_HALT, ep,
1180                         NULL, 0, USB_CTRL_SET_TIMEOUT);
1181         if (retval < 0) {
1182                 dbg ("ep %02x couldn't set halt, %d", ep, retval);
1183                 return retval;
1184         }
1185         retval = verify_halted (ep, urb);
1186         if (retval < 0)
1187                 return retval;
1188
1189         /* clear halt (tests API + protocol), verify it worked */
1190         retval = usb_clear_halt (urb->dev, urb->pipe);
1191         if (retval < 0) {
1192                 dbg ("ep %02x couldn't clear halt, %d", ep, retval);
1193                 return retval;
1194         }
1195         retval = verify_not_halted (ep, urb);
1196         if (retval < 0)
1197                 return retval;
1198
1199         /* NOTE:  could also verify SET_INTERFACE clear halts ... */
1200
1201         return 0;
1202 }
1203
1204 static int halt_simple (struct usbtest_dev *dev)
1205 {
1206         int             ep;
1207         int             retval = 0;
1208         struct urb      *urb;
1209
1210         urb = simple_alloc_urb (testdev_to_usbdev (dev), 0, 512);
1211         if (urb == NULL)
1212                 return -ENOMEM;
1213
1214         if (dev->in_pipe) {
1215                 ep = usb_pipeendpoint (dev->in_pipe) | USB_DIR_IN;
1216                 urb->pipe = dev->in_pipe;
1217                 retval = test_halt (ep, urb);
1218                 if (retval < 0)
1219                         goto done;
1220         }
1221
1222         if (dev->out_pipe) {
1223                 ep = usb_pipeendpoint (dev->out_pipe);
1224                 urb->pipe = dev->out_pipe;
1225                 retval = test_halt (ep, urb);
1226         }
1227 done:
1228         simple_free_urb (urb);
1229         return retval;
1230 }
1231
1232 /*-------------------------------------------------------------------------*/
1233
1234 /* Control OUT tests use the vendor control requests from Intel's
1235  * USB 2.0 compliance test device:  write a buffer, read it back.
1236  *
1237  * Intel's spec only _requires_ that it work for one packet, which
1238  * is pretty weak.   Some HCDs place limits here; most devices will
1239  * need to be able to handle more than one OUT data packet.  We'll
1240  * try whatever we're told to try.
1241  */
1242 static int ctrl_out (struct usbtest_dev *dev,
1243                 unsigned count, unsigned length, unsigned vary)
1244 {
1245         unsigned                i, j, len;
1246         int                     retval;
1247         u8                      *buf;
1248         char                    *what = "?";
1249         struct usb_device       *udev;
1250
1251         if (length < 1 || length > 0xffff || vary >= length)
1252                 return -EINVAL;
1253
1254         buf = kmalloc(length, SLAB_KERNEL);
1255         if (!buf)
1256                 return -ENOMEM;
1257
1258         udev = testdev_to_usbdev (dev);
1259         len = length;
1260         retval = 0;
1261
1262         /* NOTE:  hardware might well act differently if we pushed it
1263          * with lots back-to-back queued requests.
1264          */
1265         for (i = 0; i < count; i++) {
1266                 /* write patterned data */
1267                 for (j = 0; j < len; j++)
1268                         buf [j] = i + j;
1269                 retval = usb_control_msg (udev, usb_sndctrlpipe (udev,0),
1270                                 0x5b, USB_DIR_OUT|USB_TYPE_VENDOR,
1271                                 0, 0, buf, len, USB_CTRL_SET_TIMEOUT);
1272                 if (retval != len) {
1273                         what = "write";
1274                         if (retval >= 0) {
1275                                 INFO(dev, "ctrl_out, wlen %d (expected %d)\n",
1276                                                 retval, len);
1277                                 retval = -EBADMSG;
1278                         }
1279                         break;
1280                 }
1281
1282                 /* read it back -- assuming nothing intervened!!  */
1283                 retval = usb_control_msg (udev, usb_rcvctrlpipe (udev,0),
1284                                 0x5c, USB_DIR_IN|USB_TYPE_VENDOR,
1285                                 0, 0, buf, len, USB_CTRL_GET_TIMEOUT);
1286                 if (retval != len) {
1287                         what = "read";
1288                         if (retval >= 0) {
1289                                 INFO(dev, "ctrl_out, rlen %d (expected %d)\n",
1290                                                 retval, len);
1291                                 retval = -EBADMSG;
1292                         }
1293                         break;
1294                 }
1295
1296                 /* fail if we can't verify */
1297                 for (j = 0; j < len; j++) {
1298                         if (buf [j] != (u8) (i + j)) {
1299                                 INFO (dev, "ctrl_out, byte %d is %d not %d\n",
1300                                         j, buf [j], (u8) i + j);
1301                                 retval = -EBADMSG;
1302                                 break;
1303                         }
1304                 }
1305                 if (retval < 0) {
1306                         what = "verify";
1307                         break;
1308                 }
1309
1310                 len += vary;
1311
1312                 /* [real world] the "zero bytes IN" case isn't really used.
1313                  * hardware can easily trip up in this wierd case, since its
1314                  * status stage is IN, not OUT like other ep0in transfers.
1315                  */
1316                 if (len > length)
1317                         len = realworld ? 1 : 0;
1318         }
1319
1320         if (retval < 0)
1321                 INFO (dev, "ctrl_out %s failed, code %d, count %d\n",
1322                         what, retval, i);
1323
1324         kfree (buf);
1325         return retval;
1326 }
1327
1328 /*-------------------------------------------------------------------------*/
1329
1330 /* ISO tests ... mimics common usage
1331  *  - buffer length is split into N packets (mostly maxpacket sized)
1332  *  - multi-buffers according to sglen
1333  */
1334
1335 struct iso_context {
1336         unsigned                count;
1337         unsigned                pending;
1338         spinlock_t              lock;
1339         struct completion       done;
1340         int                     submit_error;
1341         unsigned long           errors;
1342         unsigned long           packet_count;
1343         struct usbtest_dev      *dev;
1344 };
1345
1346 static void iso_callback (struct urb *urb)
1347 {
1348         struct iso_context      *ctx = urb->context;
1349
1350         spin_lock(&ctx->lock);
1351         ctx->count--;
1352
1353         ctx->packet_count += urb->number_of_packets;
1354         if (urb->error_count > 0)
1355                 ctx->errors += urb->error_count;
1356         else if (urb->status != 0)
1357                 ctx->errors += urb->number_of_packets;
1358
1359         if (urb->status == 0 && ctx->count > (ctx->pending - 1)
1360                         && !ctx->submit_error) {
1361                 int status = usb_submit_urb (urb, GFP_ATOMIC);
1362                 switch (status) {
1363                 case 0:
1364                         goto done;
1365                 default:
1366                         dev_dbg (&ctx->dev->intf->dev,
1367                                         "iso resubmit err %d\n",
1368                                         status);
1369                         /* FALLTHROUGH */
1370                 case -ENODEV:                   /* disconnected */
1371                 case -ESHUTDOWN:                /* endpoint disabled */
1372                         ctx->submit_error = 1;
1373                         break;
1374                 }
1375         }
1376         simple_free_urb (urb);
1377
1378         ctx->pending--;
1379         if (ctx->pending == 0) {
1380                 if (ctx->errors)
1381                         dev_dbg (&ctx->dev->intf->dev,
1382                                 "iso test, %lu errors out of %lu\n",
1383                                 ctx->errors, ctx->packet_count);
1384                 complete (&ctx->done);
1385         }
1386 done:
1387         spin_unlock(&ctx->lock);
1388 }
1389
1390 static struct urb *iso_alloc_urb (
1391         struct usb_device       *udev,
1392         int                     pipe,
1393         struct usb_endpoint_descriptor  *desc,
1394         long                    bytes
1395 )
1396 {
1397         struct urb              *urb;
1398         unsigned                i, maxp, packets;
1399
1400         if (bytes < 0 || !desc)
1401                 return NULL;
1402         maxp = 0x7ff & le16_to_cpu(desc->wMaxPacketSize);
1403         maxp *= 1 + (0x3 & (le16_to_cpu(desc->wMaxPacketSize) >> 11));
1404         packets = (bytes + maxp - 1) / maxp;
1405
1406         urb = usb_alloc_urb (packets, SLAB_KERNEL);
1407         if (!urb)
1408                 return urb;
1409         urb->dev = udev;
1410         urb->pipe = pipe;
1411
1412         urb->number_of_packets = packets;
1413         urb->transfer_buffer_length = bytes;
1414         urb->transfer_buffer = usb_buffer_alloc (udev, bytes, SLAB_KERNEL,
1415                         &urb->transfer_dma);
1416         if (!urb->transfer_buffer) {
1417                 usb_free_urb (urb);
1418                 return NULL;
1419         }
1420         memset (urb->transfer_buffer, 0, bytes);
1421         for (i = 0; i < packets; i++) {
1422                 /* here, only the last packet will be short */
1423                 urb->iso_frame_desc[i].length = min ((unsigned) bytes, maxp);
1424                 bytes -= urb->iso_frame_desc[i].length;
1425
1426                 urb->iso_frame_desc[i].offset = maxp * i;
1427         }
1428
1429         urb->complete = iso_callback;
1430         // urb->context = SET BY CALLER
1431         urb->interval = 1 << (desc->bInterval - 1);
1432         urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
1433         return urb;
1434 }
1435
1436 static int
1437 test_iso_queue (struct usbtest_dev *dev, struct usbtest_param *param,
1438                 int pipe, struct usb_endpoint_descriptor *desc)
1439 {
1440         struct iso_context      context;
1441         struct usb_device       *udev;
1442         unsigned                i;
1443         unsigned long           packets = 0;
1444         int                     status = 0;
1445         struct urb              *urbs[10];      /* FIXME no limit */
1446
1447         if (param->sglen > 10)
1448                 return -EDOM;
1449
1450         memset(&context, 0, sizeof context);
1451         context.count = param->iterations * param->sglen;
1452         context.dev = dev;
1453         init_completion (&context.done);
1454         spin_lock_init (&context.lock);
1455
1456         memset (urbs, 0, sizeof urbs);
1457         udev = testdev_to_usbdev (dev);
1458         dev_dbg (&dev->intf->dev,
1459                 "... iso period %d %sframes, wMaxPacket %04x\n",
1460                 1 << (desc->bInterval - 1),
1461                 (udev->speed == USB_SPEED_HIGH) ? "micro" : "",
1462                 le16_to_cpu(desc->wMaxPacketSize));
1463
1464         for (i = 0; i < param->sglen; i++) {
1465                 urbs [i] = iso_alloc_urb (udev, pipe, desc,
1466                                 param->length);
1467                 if (!urbs [i]) {
1468                         status = -ENOMEM;
1469                         goto fail;
1470                 }
1471                 packets += urbs[i]->number_of_packets;
1472                 urbs [i]->context = &context;
1473         }
1474         packets *= param->iterations;
1475         dev_dbg (&dev->intf->dev,
1476                 "... total %lu msec (%lu packets)\n",
1477                 (packets * (1 << (desc->bInterval - 1)))
1478                         / ((udev->speed == USB_SPEED_HIGH) ? 8 : 1),
1479                 packets);
1480
1481         spin_lock_irq (&context.lock);
1482         for (i = 0; i < param->sglen; i++) {
1483                 ++context.pending;
1484                 status = usb_submit_urb (urbs [i], SLAB_ATOMIC);
1485                 if (status < 0) {
1486                         ERROR (dev, "submit iso[%d], error %d\n", i, status);
1487                         if (i == 0) {
1488                                 spin_unlock_irq (&context.lock);
1489                                 goto fail;
1490                         }
1491
1492                         simple_free_urb (urbs [i]);
1493                         context.pending--;
1494                         context.submit_error = 1;
1495                         break;
1496                 }
1497         }
1498         spin_unlock_irq (&context.lock);
1499
1500         wait_for_completion (&context.done);
1501
1502         /*
1503          * Isochronous transfers are expected to fail sometimes.  As an
1504          * arbitrary limit, we will report an error if any submissions
1505          * fail or if the transfer failure rate is > 10%.
1506          */
1507         if (status != 0)
1508                 ;
1509         else if (context.submit_error)
1510                 status = -EACCES;
1511         else if (context.errors > context.packet_count / 10)
1512                 status = -EIO;
1513         return status;
1514
1515 fail:
1516         for (i = 0; i < param->sglen; i++) {
1517                 if (urbs [i])
1518                         simple_free_urb (urbs [i]);
1519         }
1520         return status;
1521 }
1522
1523 /*-------------------------------------------------------------------------*/
1524
1525 /* We only have this one interface to user space, through usbfs.
1526  * User mode code can scan usbfs to find N different devices (maybe on
1527  * different busses) to use when testing, and allocate one thread per
1528  * test.  So discovery is simplified, and we have no device naming issues.
1529  *
1530  * Don't use these only as stress/load tests.  Use them along with with
1531  * other USB bus activity:  plugging, unplugging, mousing, mp3 playback,
1532  * video capture, and so on.  Run different tests at different times, in
1533  * different sequences.  Nothing here should interact with other devices,
1534  * except indirectly by consuming USB bandwidth and CPU resources for test
1535  * threads and request completion.  But the only way to know that for sure
1536  * is to test when HC queues are in use by many devices.
1537  */
1538
1539 static int
1540 usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
1541 {
1542         struct usbtest_dev      *dev = usb_get_intfdata (intf);
1543         struct usb_device       *udev = testdev_to_usbdev (dev);
1544         struct usbtest_param    *param = buf;
1545         int                     retval = -EOPNOTSUPP;
1546         struct urb              *urb;
1547         struct scatterlist      *sg;
1548         struct usb_sg_request   req;
1549         struct timeval          start;
1550         unsigned                i;
1551
1552         // FIXME USBDEVFS_CONNECTINFO doesn't say how fast the device is.
1553
1554         if (code != USBTEST_REQUEST)
1555                 return -EOPNOTSUPP;
1556
1557         if (param->iterations <= 0 || param->length < 0
1558                         || param->sglen < 0 || param->vary < 0)
1559                 return -EINVAL;
1560
1561         if (down_interruptible (&dev->sem))
1562                 return -ERESTARTSYS;
1563
1564         if (intf->dev.power.power_state.event != PM_EVENT_ON) {
1565                 up (&dev->sem);
1566                 return -EHOSTUNREACH;
1567         }
1568
1569         /* some devices, like ez-usb default devices, need a non-default
1570          * altsetting to have any active endpoints.  some tests change
1571          * altsettings; force a default so most tests don't need to check.
1572          */
1573         if (dev->info->alt >= 0) {
1574                 int     res;
1575
1576                 if (intf->altsetting->desc.bInterfaceNumber) {
1577                         up (&dev->sem);
1578                         return -ENODEV;
1579                 }
1580                 res = set_altsetting (dev, dev->info->alt);
1581                 if (res) {
1582                         dev_err (&intf->dev,
1583                                         "set altsetting to %d failed, %d\n",
1584                                         dev->info->alt, res);
1585                         up (&dev->sem);
1586                         return res;
1587                 }
1588         }
1589
1590         /*
1591          * Just a bunch of test cases that every HCD is expected to handle.
1592          *
1593          * Some may need specific firmware, though it'd be good to have
1594          * one firmware image to handle all the test cases.
1595          *
1596          * FIXME add more tests!  cancel requests, verify the data, control
1597          * queueing, concurrent read+write threads, and so on.
1598          */
1599         do_gettimeofday (&start);
1600         switch (param->test_num) {
1601
1602         case 0:
1603                 dev_dbg (&intf->dev, "TEST 0:  NOP\n");
1604                 retval = 0;
1605                 break;
1606
1607         /* Simple non-queued bulk I/O tests */
1608         case 1:
1609                 if (dev->out_pipe == 0)
1610                         break;
1611                 dev_dbg (&intf->dev,
1612                                 "TEST 1:  write %d bytes %u times\n",
1613                                 param->length, param->iterations);
1614                 urb = simple_alloc_urb (udev, dev->out_pipe, param->length);
1615                 if (!urb) {
1616                         retval = -ENOMEM;
1617                         break;
1618                 }
1619                 // FIRMWARE:  bulk sink (maybe accepts short writes)
1620                 retval = simple_io (urb, param->iterations, 0, 0, "test1");
1621                 simple_free_urb (urb);
1622                 break;
1623         case 2:
1624                 if (dev->in_pipe == 0)
1625                         break;
1626                 dev_dbg (&intf->dev,
1627                                 "TEST 2:  read %d bytes %u times\n",
1628                                 param->length, param->iterations);
1629                 urb = simple_alloc_urb (udev, dev->in_pipe, param->length);
1630                 if (!urb) {
1631                         retval = -ENOMEM;
1632                         break;
1633                 }
1634                 // FIRMWARE:  bulk source (maybe generates short writes)
1635                 retval = simple_io (urb, param->iterations, 0, 0, "test2");
1636                 simple_free_urb (urb);
1637                 break;
1638         case 3:
1639                 if (dev->out_pipe == 0 || param->vary == 0)
1640                         break;
1641                 dev_dbg (&intf->dev,
1642                                 "TEST 3:  write/%d 0..%d bytes %u times\n",
1643                                 param->vary, param->length, param->iterations);
1644                 urb = simple_alloc_urb (udev, dev->out_pipe, param->length);
1645                 if (!urb) {
1646                         retval = -ENOMEM;
1647                         break;
1648                 }
1649                 // FIRMWARE:  bulk sink (maybe accepts short writes)
1650                 retval = simple_io (urb, param->iterations, param->vary,
1651                                         0, "test3");
1652                 simple_free_urb (urb);
1653                 break;
1654         case 4:
1655                 if (dev->in_pipe == 0 || param->vary == 0)
1656                         break;
1657                 dev_dbg (&intf->dev,
1658                                 "TEST 4:  read/%d 0..%d bytes %u times\n",
1659                                 param->vary, param->length, param->iterations);
1660                 urb = simple_alloc_urb (udev, dev->in_pipe, param->length);
1661                 if (!urb) {
1662                         retval = -ENOMEM;
1663                         break;
1664                 }
1665                 // FIRMWARE:  bulk source (maybe generates short writes)
1666                 retval = simple_io (urb, param->iterations, param->vary,
1667                                         0, "test4");
1668                 simple_free_urb (urb);
1669                 break;
1670
1671         /* Queued bulk I/O tests */
1672         case 5:
1673                 if (dev->out_pipe == 0 || param->sglen == 0)
1674                         break;
1675                 dev_dbg (&intf->dev,
1676                         "TEST 5:  write %d sglists %d entries of %d bytes\n",
1677                                 param->iterations,
1678                                 param->sglen, param->length);
1679                 sg = alloc_sglist (param->sglen, param->length, 0);
1680                 if (!sg) {
1681                         retval = -ENOMEM;
1682                         break;
1683                 }
1684                 // FIRMWARE:  bulk sink (maybe accepts short writes)
1685                 retval = perform_sglist (udev, param->iterations, dev->out_pipe,
1686                                 &req, sg, param->sglen);
1687                 free_sglist (sg, param->sglen);
1688                 break;
1689
1690         case 6:
1691                 if (dev->in_pipe == 0 || param->sglen == 0)
1692                         break;
1693                 dev_dbg (&intf->dev,
1694                         "TEST 6:  read %d sglists %d entries of %d bytes\n",
1695                                 param->iterations,
1696                                 param->sglen, param->length);
1697                 sg = alloc_sglist (param->sglen, param->length, 0);
1698                 if (!sg) {
1699                         retval = -ENOMEM;
1700                         break;
1701                 }
1702                 // FIRMWARE:  bulk source (maybe generates short writes)
1703                 retval = perform_sglist (udev, param->iterations, dev->in_pipe,
1704                                 &req, sg, param->sglen);
1705                 free_sglist (sg, param->sglen);
1706                 break;
1707         case 7:
1708                 if (dev->out_pipe == 0 || param->sglen == 0 || param->vary == 0)
1709                         break;
1710                 dev_dbg (&intf->dev,
1711                         "TEST 7:  write/%d %d sglists %d entries 0..%d bytes\n",
1712                                 param->vary, param->iterations,
1713                                 param->sglen, param->length);
1714                 sg = alloc_sglist (param->sglen, param->length, param->vary);
1715                 if (!sg) {
1716                         retval = -ENOMEM;
1717                         break;
1718                 }
1719                 // FIRMWARE:  bulk sink (maybe accepts short writes)
1720                 retval = perform_sglist (udev, param->iterations, dev->out_pipe,
1721                                 &req, sg, param->sglen);
1722                 free_sglist (sg, param->sglen);
1723                 break;
1724         case 8:
1725                 if (dev->in_pipe == 0 || param->sglen == 0 || param->vary == 0)
1726                         break;
1727                 dev_dbg (&intf->dev,
1728                         "TEST 8:  read/%d %d sglists %d entries 0..%d bytes\n",
1729                                 param->vary, param->iterations,
1730                                 param->sglen, param->length);
1731                 sg = alloc_sglist (param->sglen, param->length, param->vary);
1732                 if (!sg) {
1733                         retval = -ENOMEM;
1734                         break;
1735                 }
1736                 // FIRMWARE:  bulk source (maybe generates short writes)
1737                 retval = perform_sglist (udev, param->iterations, dev->in_pipe,
1738                                 &req, sg, param->sglen);
1739                 free_sglist (sg, param->sglen);
1740                 break;
1741
1742         /* non-queued sanity tests for control (chapter 9 subset) */
1743         case 9:
1744                 retval = 0;
1745                 dev_dbg (&intf->dev,
1746                         "TEST 9:  ch9 (subset) control tests, %d times\n",
1747                                 param->iterations);
1748                 for (i = param->iterations; retval == 0 && i--; /* NOP */)
1749                         retval = ch9_postconfig (dev);
1750                 if (retval)
1751                         dbg ("ch9 subset failed, iterations left %d", i);
1752                 break;
1753
1754         /* queued control messaging */
1755         case 10:
1756                 if (param->sglen == 0)
1757                         break;
1758                 retval = 0;
1759                 dev_dbg (&intf->dev,
1760                                 "TEST 10:  queue %d control calls, %d times\n",
1761                                 param->sglen,
1762                                 param->iterations);
1763                 retval = test_ctrl_queue (dev, param);
1764                 break;
1765
1766         /* simple non-queued unlinks (ring with one urb) */
1767         case 11:
1768                 if (dev->in_pipe == 0 || !param->length)
1769                         break;
1770                 retval = 0;
1771                 dev_dbg (&intf->dev, "TEST 11:  unlink %d reads of %d\n",
1772                                 param->iterations, param->length);
1773                 for (i = param->iterations; retval == 0 && i--; /* NOP */)
1774                         retval = unlink_simple (dev, dev->in_pipe,
1775                                                 param->length);
1776                 if (retval)
1777                         dev_dbg (&intf->dev, "unlink reads failed %d, "
1778                                 "iterations left %d\n", retval, i);
1779                 break;
1780         case 12:
1781                 if (dev->out_pipe == 0 || !param->length)
1782                         break;
1783                 retval = 0;
1784                 dev_dbg (&intf->dev, "TEST 12:  unlink %d writes of %d\n",
1785                                 param->iterations, param->length);
1786                 for (i = param->iterations; retval == 0 && i--; /* NOP */)
1787                         retval = unlink_simple (dev, dev->out_pipe,
1788                                                 param->length);
1789                 if (retval)
1790                         dev_dbg (&intf->dev, "unlink writes failed %d, "
1791                                 "iterations left %d\n", retval, i);
1792                 break;
1793
1794         /* ep halt tests */
1795         case 13:
1796                 if (dev->out_pipe == 0 && dev->in_pipe == 0)
1797                         break;
1798                 retval = 0;
1799                 dev_dbg (&intf->dev, "TEST 13:  set/clear %d halts\n",
1800                                 param->iterations);
1801                 for (i = param->iterations; retval == 0 && i--; /* NOP */)
1802                         retval = halt_simple (dev);
1803
1804                 if (retval)
1805                         DBG (dev, "halts failed, iterations left %d\n", i);
1806                 break;
1807
1808         /* control write tests */
1809         case 14:
1810                 if (!dev->info->ctrl_out)
1811                         break;
1812                 dev_dbg (&intf->dev, "TEST 14:  %d ep0out, %d..%d vary %d\n",
1813                                 param->iterations,
1814                                 realworld ? 1 : 0, param->length,
1815                                 param->vary);
1816                 retval = ctrl_out (dev, param->iterations,
1817                                 param->length, param->vary);
1818                 break;
1819
1820         /* iso write tests */
1821         case 15:
1822                 if (dev->out_iso_pipe == 0 || param->sglen == 0)
1823                         break;
1824                 dev_dbg (&intf->dev,
1825                         "TEST 15:  write %d iso, %d entries of %d bytes\n",
1826                                 param->iterations,
1827                                 param->sglen, param->length);
1828                 // FIRMWARE:  iso sink
1829                 retval = test_iso_queue (dev, param,
1830                                 dev->out_iso_pipe, dev->iso_out);
1831                 break;
1832
1833         /* iso read tests */
1834         case 16:
1835                 if (dev->in_iso_pipe == 0 || param->sglen == 0)
1836                         break;
1837                 dev_dbg (&intf->dev,
1838                         "TEST 16:  read %d iso, %d entries of %d bytes\n",
1839                                 param->iterations,
1840                                 param->sglen, param->length);
1841                 // FIRMWARE:  iso source
1842                 retval = test_iso_queue (dev, param,
1843                                 dev->in_iso_pipe, dev->iso_in);
1844                 break;
1845
1846         // FIXME unlink from queue (ring with N urbs)
1847
1848         // FIXME scatterlist cancel (needs helper thread)
1849
1850         }
1851         do_gettimeofday (&param->duration);
1852         param->duration.tv_sec -= start.tv_sec;
1853         param->duration.tv_usec -= start.tv_usec;
1854         if (param->duration.tv_usec < 0) {
1855                 param->duration.tv_usec += 1000 * 1000;
1856                 param->duration.tv_sec -= 1;
1857         }
1858         up (&dev->sem);
1859         return retval;
1860 }
1861
1862 /*-------------------------------------------------------------------------*/
1863
1864 static unsigned force_interrupt = 0;
1865 module_param (force_interrupt, uint, 0);
1866 MODULE_PARM_DESC (force_interrupt, "0 = test default; else interrupt");
1867
1868 #ifdef  GENERIC
1869 static unsigned short vendor;
1870 module_param(vendor, ushort, 0);
1871 MODULE_PARM_DESC (vendor, "vendor code (from usb-if)");
1872
1873 static unsigned short product;
1874 module_param(product, ushort, 0);
1875 MODULE_PARM_DESC (product, "product code (from vendor)");
1876 #endif
1877
1878 static int
1879 usbtest_probe (struct usb_interface *intf, const struct usb_device_id *id)
1880 {
1881         struct usb_device       *udev;
1882         struct usbtest_dev      *dev;
1883         struct usbtest_info     *info;
1884         char                    *rtest, *wtest;
1885         char                    *irtest, *iwtest;
1886
1887         udev = interface_to_usbdev (intf);
1888
1889 #ifdef  GENERIC
1890         /* specify devices by module parameters? */
1891         if (id->match_flags == 0) {
1892                 /* vendor match required, product match optional */
1893                 if (!vendor || le16_to_cpu(udev->descriptor.idVendor) != (u16)vendor)
1894                         return -ENODEV;
1895                 if (product && le16_to_cpu(udev->descriptor.idProduct) != (u16)product)
1896                         return -ENODEV;
1897                 dbg ("matched module params, vend=0x%04x prod=0x%04x",
1898                                 le16_to_cpu(udev->descriptor.idVendor),
1899                                 le16_to_cpu(udev->descriptor.idProduct));
1900         }
1901 #endif
1902
1903         dev = kzalloc(sizeof(*dev), SLAB_KERNEL);
1904         if (!dev)
1905                 return -ENOMEM;
1906         info = (struct usbtest_info *) id->driver_info;
1907         dev->info = info;
1908         init_MUTEX (&dev->sem);
1909
1910         dev->intf = intf;
1911
1912         /* cacheline-aligned scratch for i/o */
1913         if ((dev->buf = kmalloc (TBUF_SIZE, SLAB_KERNEL)) == NULL) {
1914                 kfree (dev);
1915                 return -ENOMEM;
1916         }
1917
1918         /* NOTE this doesn't yet test the handful of difference that are
1919          * visible with high speed interrupts:  bigger maxpacket (1K) and
1920          * "high bandwidth" modes (up to 3 packets/uframe).
1921          */
1922         rtest = wtest = "";
1923         irtest = iwtest = "";
1924         if (force_interrupt || udev->speed == USB_SPEED_LOW) {
1925                 if (info->ep_in) {
1926                         dev->in_pipe = usb_rcvintpipe (udev, info->ep_in);
1927                         rtest = " intr-in";
1928                 }
1929                 if (info->ep_out) {
1930                         dev->out_pipe = usb_sndintpipe (udev, info->ep_out);
1931                         wtest = " intr-out";
1932                 }
1933         } else {
1934                 if (info->autoconf) {
1935                         int status;
1936
1937                         status = get_endpoints (dev, intf);
1938                         if (status < 0) {
1939                                 dbg ("couldn't get endpoints, %d\n", status);
1940                                 return status;
1941                         }
1942                         /* may find bulk or ISO pipes */
1943                 } else {
1944                         if (info->ep_in)
1945                                 dev->in_pipe = usb_rcvbulkpipe (udev,
1946                                                         info->ep_in);
1947                         if (info->ep_out)
1948                                 dev->out_pipe = usb_sndbulkpipe (udev,
1949                                                         info->ep_out);
1950                 }
1951                 if (dev->in_pipe)
1952                         rtest = " bulk-in";
1953                 if (dev->out_pipe)
1954                         wtest = " bulk-out";
1955                 if (dev->in_iso_pipe)
1956                         irtest = " iso-in";
1957                 if (dev->out_iso_pipe)
1958                         iwtest = " iso-out";
1959         }
1960
1961         usb_set_intfdata (intf, dev);
1962         dev_info (&intf->dev, "%s\n", info->name);
1963         dev_info (&intf->dev, "%s speed {control%s%s%s%s%s} tests%s\n",
1964                         ({ char *tmp;
1965                         switch (udev->speed) {
1966                         case USB_SPEED_LOW: tmp = "low"; break;
1967                         case USB_SPEED_FULL: tmp = "full"; break;
1968                         case USB_SPEED_HIGH: tmp = "high"; break;
1969                         default: tmp = "unknown"; break;
1970                         }; tmp; }),
1971                         info->ctrl_out ? " in/out" : "",
1972                         rtest, wtest,
1973                         irtest, iwtest,
1974                         info->alt >= 0 ? " (+alt)" : "");
1975         return 0;
1976 }
1977
1978 static int usbtest_suspend (struct usb_interface *intf, pm_message_t message)
1979 {
1980         return 0;
1981 }
1982
1983 static int usbtest_resume (struct usb_interface *intf)
1984 {
1985         return 0;
1986 }
1987
1988
1989 static void usbtest_disconnect (struct usb_interface *intf)
1990 {
1991         struct usbtest_dev      *dev = usb_get_intfdata (intf);
1992
1993         down (&dev->sem);
1994
1995         usb_set_intfdata (intf, NULL);
1996         dev_dbg (&intf->dev, "disconnect\n");
1997         kfree (dev);
1998 }
1999
2000 /* Basic testing only needs a device that can source or sink bulk traffic.
2001  * Any device can test control transfers (default with GENERIC binding).
2002  *
2003  * Several entries work with the default EP0 implementation that's built
2004  * into EZ-USB chips.  There's a default vendor ID which can be overridden
2005  * by (very) small config EEPROMS, but otherwise all these devices act
2006  * identically until firmware is loaded:  only EP0 works.  It turns out
2007  * to be easy to make other endpoints work, without modifying that EP0
2008  * behavior.  For now, we expect that kind of firmware.
2009  */
2010
2011 /* an21xx or fx versions of ez-usb */
2012 static struct usbtest_info ez1_info = {
2013         .name           = "EZ-USB device",
2014         .ep_in          = 2,
2015         .ep_out         = 2,
2016         .alt            = 1,
2017 };
2018
2019 /* fx2 version of ez-usb */
2020 static struct usbtest_info ez2_info = {
2021         .name           = "FX2 device",
2022         .ep_in          = 6,
2023         .ep_out         = 2,
2024         .alt            = 1,
2025 };
2026
2027 /* ezusb family device with dedicated usb test firmware,
2028  */
2029 static struct usbtest_info fw_info = {
2030         .name           = "usb test device",
2031         .ep_in          = 2,
2032         .ep_out         = 2,
2033         .alt            = 1,
2034         .autoconf       = 1,            // iso and ctrl_out need autoconf
2035         .ctrl_out       = 1,
2036         .iso            = 1,            // iso_ep's are #8 in/out
2037 };
2038
2039 /* peripheral running Linux and 'zero.c' test firmware, or
2040  * its user-mode cousin. different versions of this use
2041  * different hardware with the same vendor/product codes.
2042  * host side MUST rely on the endpoint descriptors.
2043  */
2044 static struct usbtest_info gz_info = {
2045         .name           = "Linux gadget zero",
2046         .autoconf       = 1,
2047         .ctrl_out       = 1,
2048         .alt            = 0,
2049 };
2050
2051 static struct usbtest_info um_info = {
2052         .name           = "Linux user mode test driver",
2053         .autoconf       = 1,
2054         .alt            = -1,
2055 };
2056
2057 static struct usbtest_info um2_info = {
2058         .name           = "Linux user mode ISO test driver",
2059         .autoconf       = 1,
2060         .iso            = 1,
2061         .alt            = -1,
2062 };
2063
2064 #ifdef IBOT2
2065 /* this is a nice source of high speed bulk data;
2066  * uses an FX2, with firmware provided in the device
2067  */
2068 static struct usbtest_info ibot2_info = {
2069         .name           = "iBOT2 webcam",
2070         .ep_in          = 2,
2071         .alt            = -1,
2072 };
2073 #endif
2074
2075 #ifdef GENERIC
2076 /* we can use any device to test control traffic */
2077 static struct usbtest_info generic_info = {
2078         .name           = "Generic USB device",
2079         .alt            = -1,
2080 };
2081 #endif
2082
2083 // FIXME remove this
2084 static struct usbtest_info hact_info = {
2085         .name           = "FX2/hact",
2086         //.ep_in                = 6,
2087         .ep_out         = 2,
2088         .alt            = -1,
2089 };
2090
2091
2092 static struct usb_device_id id_table [] = {
2093
2094         { USB_DEVICE (0x0547, 0x1002),
2095                 .driver_info = (unsigned long) &hact_info,
2096                 },
2097
2098         /*-------------------------------------------------------------*/
2099
2100         /* EZ-USB devices which download firmware to replace (or in our
2101          * case augment) the default device implementation.
2102          */
2103
2104         /* generic EZ-USB FX controller */
2105         { USB_DEVICE (0x0547, 0x2235),
2106                 .driver_info = (unsigned long) &ez1_info,
2107                 },
2108
2109         /* CY3671 development board with EZ-USB FX */
2110         { USB_DEVICE (0x0547, 0x0080),
2111                 .driver_info = (unsigned long) &ez1_info,
2112                 },
2113
2114         /* generic EZ-USB FX2 controller (or development board) */
2115         { USB_DEVICE (0x04b4, 0x8613),
2116                 .driver_info = (unsigned long) &ez2_info,
2117                 },
2118
2119         /* re-enumerated usb test device firmware */
2120         { USB_DEVICE (0xfff0, 0xfff0),
2121                 .driver_info = (unsigned long) &fw_info,
2122                 },
2123
2124         /* "Gadget Zero" firmware runs under Linux */
2125         { USB_DEVICE (0x0525, 0xa4a0),
2126                 .driver_info = (unsigned long) &gz_info,
2127                 },
2128
2129         /* so does a user-mode variant */
2130         { USB_DEVICE (0x0525, 0xa4a4),
2131                 .driver_info = (unsigned long) &um_info,
2132                 },
2133
2134         /* ... and a user-mode variant that talks iso */
2135         { USB_DEVICE (0x0525, 0xa4a3),
2136                 .driver_info = (unsigned long) &um2_info,
2137                 },
2138
2139 #ifdef KEYSPAN_19Qi
2140         /* Keyspan 19qi uses an21xx (original EZ-USB) */
2141         // this does not coexist with the real Keyspan 19qi driver!
2142         { USB_DEVICE (0x06cd, 0x010b),
2143                 .driver_info = (unsigned long) &ez1_info,
2144                 },
2145 #endif
2146
2147         /*-------------------------------------------------------------*/
2148
2149 #ifdef IBOT2
2150         /* iBOT2 makes a nice source of high speed bulk-in data */
2151         // this does not coexist with a real iBOT2 driver!
2152         { USB_DEVICE (0x0b62, 0x0059),
2153                 .driver_info = (unsigned long) &ibot2_info,
2154                 },
2155 #endif
2156
2157         /*-------------------------------------------------------------*/
2158
2159 #ifdef GENERIC
2160         /* module params can specify devices to use for control tests */
2161         { .driver_info = (unsigned long) &generic_info, },
2162 #endif
2163
2164         /*-------------------------------------------------------------*/
2165
2166         { }
2167 };
2168 MODULE_DEVICE_TABLE (usb, id_table);
2169
2170 static struct usb_driver usbtest_driver = {
2171         .name =         "usbtest",
2172         .id_table =     id_table,
2173         .probe =        usbtest_probe,
2174         .ioctl =        usbtest_ioctl,
2175         .disconnect =   usbtest_disconnect,
2176         .suspend =      usbtest_suspend,
2177         .resume =       usbtest_resume,
2178 };
2179
2180 /*-------------------------------------------------------------------------*/
2181
2182 static int __init usbtest_init (void)
2183 {
2184 #ifdef GENERIC
2185         if (vendor)
2186                 dbg ("params: vend=0x%04x prod=0x%04x", vendor, product);
2187 #endif
2188         return usb_register (&usbtest_driver);
2189 }
2190 module_init (usbtest_init);
2191
2192 static void __exit usbtest_exit (void)
2193 {
2194         usb_deregister (&usbtest_driver);
2195 }
2196 module_exit (usbtest_exit);
2197
2198 MODULE_DESCRIPTION ("USB Core/HCD Testing Driver");
2199 MODULE_LICENSE ("GPL");
2200