2 * External Interrupt Controller on Spider South Bridge
4 * (C) Copyright IBM Deutschland Entwicklung GmbH 2005
6 * Author: Arnd Bergmann <arndb@de.ibm.com>
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2, or (at your option)
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23 #include <linux/interrupt.h>
24 #include <linux/irq.h>
26 #include <asm/pgtable.h>
30 #include "interrupt.h"
32 /* register layout taken from Spider spec, table 7.4-4 */
34 TIR_DEN = 0x004, /* Detection Enable Register */
35 TIR_MSK = 0x084, /* Mask Level Register */
36 TIR_EDC = 0x0c0, /* Edge Detection Clear Register */
37 TIR_PNDA = 0x100, /* Pending Register A */
38 TIR_PNDB = 0x104, /* Pending Register B */
39 TIR_CS = 0x144, /* Current Status Register */
40 TIR_LCSA = 0x150, /* Level Current Status Register A */
41 TIR_LCSB = 0x154, /* Level Current Status Register B */
42 TIR_LCSC = 0x158, /* Level Current Status Register C */
43 TIR_LCSD = 0x15c, /* Level Current Status Register D */
44 TIR_CFGA = 0x200, /* Setting Register A0 */
45 TIR_CFGB = 0x204, /* Setting Register B0 */
46 /* 0x208 ... 0x3ff Setting Register An/Bn */
47 TIR_PPNDA = 0x400, /* Packet Pending Register A */
48 TIR_PPNDB = 0x404, /* Packet Pending Register B */
49 TIR_PIERA = 0x408, /* Packet Output Error Register A */
50 TIR_PIERB = 0x40c, /* Packet Output Error Register B */
51 TIR_PIEN = 0x444, /* Packet Output Enable Register */
52 TIR_PIPND = 0x454, /* Packet Output Pending Register */
53 TIRDID = 0x484, /* Spider Device ID Register */
54 REISTIM = 0x500, /* Reissue Command Timeout Time Setting */
55 REISTIMEN = 0x504, /* Reissue Command Timeout Setting */
56 REISWAITEN = 0x508, /* Reissue Wait Control*/
59 static void __iomem *spider_pics[4];
61 static void __iomem *spider_get_pic(int irq)
63 int node = irq / IIC_NODE_STRIDE;
64 irq %= IIC_NODE_STRIDE;
66 if (irq >= IIC_EXT_OFFSET &&
67 irq < IIC_EXT_OFFSET + IIC_NUM_EXT &&
69 return spider_pics[node];
73 static int spider_get_nr(unsigned int irq)
75 return (irq % IIC_NODE_STRIDE) - IIC_EXT_OFFSET;
78 static void __iomem *spider_get_irq_config(int irq)
81 pic = spider_get_pic(irq);
82 return pic + TIR_CFGA + 8 * spider_get_nr(irq);
85 static void spider_enable_irq(unsigned int irq)
87 int nodeid = (irq / IIC_NODE_STRIDE) * 0x10;
88 void __iomem *cfg = spider_get_irq_config(irq);
89 irq = spider_get_nr(irq);
91 out_be32(cfg, (in_be32(cfg) & ~0xf0)| 0x3107000eu | nodeid);
92 out_be32(cfg + 4, in_be32(cfg + 4) | 0x00020000u | irq);
95 static void spider_disable_irq(unsigned int irq)
97 void __iomem *cfg = spider_get_irq_config(irq);
98 irq = spider_get_nr(irq);
100 out_be32(cfg, in_be32(cfg) & ~0x30000000u);
103 static unsigned int spider_startup_irq(unsigned int irq)
105 spider_enable_irq(irq);
109 static void spider_shutdown_irq(unsigned int irq)
111 spider_disable_irq(irq);
114 static void spider_end_irq(unsigned int irq)
116 spider_enable_irq(irq);
119 static void spider_ack_irq(unsigned int irq)
121 spider_disable_irq(irq);
125 static struct hw_interrupt_type spider_pic = {
126 .typename = " SPIDER ",
127 .startup = spider_startup_irq,
128 .shutdown = spider_shutdown_irq,
129 .enable = spider_enable_irq,
130 .disable = spider_disable_irq,
131 .ack = spider_ack_irq,
132 .end = spider_end_irq,
135 int spider_get_irq(int node)
138 void __iomem *regs = spider_pics[node];
140 cs = in_be32(regs + TIR_CS) >> 24;
148 /* hardcoded part to be compatible with older firmware */
150 void spider_init_IRQ_hardcoded(void)
154 long pics[] = { 0x24000008000, 0x34000008000 };
157 pr_debug("%s(%d): Using hardcoded defaults\n", __FUNCTION__, __LINE__);
159 for (node = 0; node < num_present_cpus()/2; node++) {
160 spiderpic = pics[node];
161 printk(KERN_DEBUG "SPIDER addr: %lx\n", spiderpic);
162 spider_pics[node] = ioremap(spiderpic, 0x800);
163 for (n = 0; n < IIC_NUM_EXT; n++) {
164 int irq = n + IIC_EXT_OFFSET + node * IIC_NODE_STRIDE;
165 get_irq_desc(irq)->chip = &spider_pic;
168 /* do not mask any interrupts because of level */
169 out_be32(spider_pics[node] + TIR_MSK, 0x0);
171 /* disable edge detection clear */
172 /* out_be32(spider_pics[node] + TIR_EDC, 0x0); */
174 /* enable interrupt packets to be output */
175 out_be32(spider_pics[node] + TIR_PIEN,
176 in_be32(spider_pics[node] + TIR_PIEN) | 0x1);
178 /* Enable the interrupt detection enable bit. Do this last! */
179 out_be32(spider_pics[node] + TIR_DEN,
180 in_be32(spider_pics[node] + TIR_DEN) | 0x1);
184 void spider_init_IRQ(void)
187 struct device_node *dn;
191 for (dn = NULL; (dn = of_find_node_by_name(dn, "interrupt-controller"));) {
192 compatible = (char *)get_property(dn, "compatible", NULL);
197 if (strstr(compatible, "CBEA,platform-spider-pic"))
198 spider_reg = *(long *)get_property(dn,"reg", NULL);
199 else if (strstr(compatible, "sti,platform-spider-pic")) {
200 spider_init_IRQ_hardcoded();
206 printk("interrupt controller does not have reg property !\n");
208 n = prom_n_addr_cells(dn);
211 printk("reg property with invalid number of elements \n");
213 spider_pics[node] = ioremap(spider_reg, 0x800);
215 printk("SPIDER addr: %lx with %i addr_cells mapped to %p\n",
216 spider_reg, n, spider_pics[node]);
218 for (n = 0; n < IIC_NUM_EXT; n++) {
219 int irq = n + IIC_EXT_OFFSET + node * IIC_NODE_STRIDE;
220 get_irq_desc(irq)->chip = &spider_pic;
223 /* do not mask any interrupts because of level */
224 out_be32(spider_pics[node] + TIR_MSK, 0x0);
226 /* disable edge detection clear */
227 /* out_be32(spider_pics[node] + TIR_EDC, 0x0); */
229 /* enable interrupt packets to be output */
230 out_be32(spider_pics[node] + TIR_PIEN,
231 in_be32(spider_pics[node] + TIR_PIEN) | 0x1);
233 /* Enable the interrupt detection enable bit. Do this last! */
234 out_be32(spider_pics[node] + TIR_DEN,
235 in_be32(spider_pics[node] + TIR_DEN) | 0x1);