1 # Helper to resolve issues with configs that have SPI enabled but I2C
2 # modular, meaning we can't build the codec driver in with I2C support.
3 # We use an ordered list of conditional defaults to pick the appropriate
4 # setting - SPI can't be modular so that case doesn't need to be covered.
5 config SND_SOC_I2C_AND_SPI
9 default y if SPI_MASTER=y
11 config SND_SOC_ALL_CODECS
12 tristate "Build all ASoC CODEC drivers"
14 select SND_SOC_AC97_CODEC if SND_SOC_AC97_BUS
15 select SND_SOC_AD1980 if SND_SOC_AC97_BUS
16 select SND_SOC_AD73311 if I2C
17 select SND_SOC_AK4104 if SPI_MASTER
18 select SND_SOC_AK4535 if I2C
19 select SND_SOC_CS4270 if I2C
20 select SND_SOC_PCM3008
22 select SND_SOC_SSM2602 if I2C
23 select SND_SOC_STAC9766 if SND_SOC_AC97_BUS
24 select SND_SOC_TLV320AIC23 if I2C
25 select SND_SOC_TLV320AIC26 if SPI_MASTER
26 select SND_SOC_TLV320AIC3X if I2C
27 select SND_SOC_TWL4030 if TWL4030_CORE
28 select SND_SOC_UDA134X
29 select SND_SOC_UDA1380 if I2C
30 select SND_SOC_WM8350 if MFD_WM8350
31 select SND_SOC_WM8400 if MFD_WM8400
32 select SND_SOC_WM8510 if SND_SOC_I2C_AND_SPI
33 select SND_SOC_WM8580 if I2C
34 select SND_SOC_WM8728 if SND_SOC_I2C_AND_SPI
35 select SND_SOC_WM8731 if SND_SOC_I2C_AND_SPI
36 select SND_SOC_WM8750 if SND_SOC_I2C_AND_SPI
37 select SND_SOC_WM8753 if SND_SOC_I2C_AND_SPI
38 select SND_SOC_WM8900 if I2C
39 select SND_SOC_WM8903 if I2C
40 select SND_SOC_WM8940 if I2C
41 select SND_SOC_WM8960 if I2C
42 select SND_SOC_WM8971 if I2C
43 select SND_SOC_WM8988 if SND_SOC_I2C_AND_SPI
44 select SND_SOC_WM8990 if I2C
45 select SND_SOC_WM9081 if I2C
46 select SND_SOC_WM9705 if SND_SOC_AC97_BUS
47 select SND_SOC_WM9712 if SND_SOC_AC97_BUS
48 select SND_SOC_WM9713 if SND_SOC_AC97_BUS
50 Normally ASoC codec drivers are only built if a machine driver which
51 uses them is also built since they are only usable with a machine
52 driver. Selecting this option will allow these drivers to be built
53 without an explicit machine driver for test and development purposes.
55 Support for the bus types used to access the codecs to be built must
56 be selected separately.
61 config SND_SOC_AC97_CODEC
68 config SND_SOC_AD73311
77 # Cirrus Logic CS4270 Codec
81 # Cirrus Logic CS4270 Codec VD = 3.3V Errata
82 # Select if you are affected by the errata where the part will not function
83 # if MCLK divide-by-1.5 is selected and VD is set to 3.3V. The driver will
84 # not select any sample rates that require MCLK to be divided by 1.5.
85 config SND_SOC_CS4270_VD33_ERRATA
87 depends on SND_SOC_CS4270
92 config SND_SOC_PCM3008
98 config SND_SOC_SSM2602
101 config SND_SOC_STAC9766
104 config SND_SOC_TLV320AIC23
107 config SND_SOC_TLV320AIC26
108 tristate "TI TLV320AIC26 Codec support" if SND_SOC_OF_SIMPLE
111 config SND_SOC_TLV320AIC3X
114 config SND_SOC_TWL4030
117 config SND_SOC_UDA134X
120 config SND_SOC_UDA1380
123 config SND_SOC_WM8350
126 config SND_SOC_WM8400
129 config SND_SOC_WM8510
132 config SND_SOC_WM8580
135 config SND_SOC_WM8728
138 config SND_SOC_WM8731
141 config SND_SOC_WM8750
144 config SND_SOC_WM8753
147 config SND_SOC_WM8900
150 config SND_SOC_WM8903
153 config SND_SOC_WM8940
156 config SND_SOC_WM8960
159 config SND_SOC_WM8971
162 config SND_SOC_WM8988
165 config SND_SOC_WM8990
168 config SND_SOC_WM9081
171 config SND_SOC_WM9705
174 config SND_SOC_WM9712
177 config SND_SOC_WM9713