Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes...
[linux-2.6] / drivers / net / chelsio / mv88e1xxx.c
1 /* $Date: 2005/10/24 23:18:13 $ $RCSfile: mv88e1xxx.c,v $ $Revision: 1.49 $ */
2 #include "common.h"
3 #include "mv88e1xxx.h"
4 #include "cphy.h"
5 #include "elmer0.h"
6
7 /* MV88E1XXX MDI crossover register values */
8 #define CROSSOVER_MDI   0
9 #define CROSSOVER_MDIX  1
10 #define CROSSOVER_AUTO  3
11
12 #define INTR_ENABLE_MASK 0x6CA0
13
14 /*
15  * Set the bits given by 'bitval' in PHY register 'reg'.
16  */
17 static void mdio_set_bit(struct cphy *cphy, int reg, u32 bitval)
18 {
19         u32 val;
20
21         (void) simple_mdio_read(cphy, reg, &val);
22         (void) simple_mdio_write(cphy, reg, val | bitval);
23 }
24
25 /*
26  * Clear the bits given by 'bitval' in PHY register 'reg'.
27  */
28 static void mdio_clear_bit(struct cphy *cphy, int reg, u32 bitval)
29 {
30         u32 val;
31
32         (void) simple_mdio_read(cphy, reg, &val);
33         (void) simple_mdio_write(cphy, reg, val & ~bitval);
34 }
35
36 /*
37  * NAME:   phy_reset
38  *
39  * DESC:   Reset the given PHY's port. NOTE: This is not a global
40  *         chip reset.
41  *
42  * PARAMS: cphy     - Pointer to PHY instance data.
43  *
44  * RETURN:  0 - Successfull reset.
45  *         -1 - Timeout.
46  */
47 static int mv88e1xxx_reset(struct cphy *cphy, int wait)
48 {
49         u32 ctl;
50         int time_out = 1000;
51
52         mdio_set_bit(cphy, MII_BMCR, BMCR_RESET);
53
54         do {
55                 (void) simple_mdio_read(cphy, MII_BMCR, &ctl);
56                 ctl &= BMCR_RESET;
57                 if (ctl)
58                         udelay(1);
59         } while (ctl && --time_out);
60
61         return ctl ? -1 : 0;
62 }
63
64 static int mv88e1xxx_interrupt_enable(struct cphy *cphy)
65 {
66         /* Enable PHY interrupts. */
67         (void) simple_mdio_write(cphy, MV88E1XXX_INTERRUPT_ENABLE_REGISTER,
68                    INTR_ENABLE_MASK);
69
70         /* Enable Marvell interrupts through Elmer0. */
71         if (t1_is_asic(cphy->adapter)) {
72                 u32 elmer;
73
74                 t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
75                 elmer |= ELMER0_GP_BIT1;
76                 if (is_T2(cphy->adapter))
77                     elmer |= ELMER0_GP_BIT2 | ELMER0_GP_BIT3 | ELMER0_GP_BIT4;
78                 t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
79         }
80         return 0;
81 }
82
83 static int mv88e1xxx_interrupt_disable(struct cphy *cphy)
84 {
85         /* Disable all phy interrupts. */
86         (void) simple_mdio_write(cphy, MV88E1XXX_INTERRUPT_ENABLE_REGISTER, 0);
87
88         /* Disable Marvell interrupts through Elmer0. */
89         if (t1_is_asic(cphy->adapter)) {
90                 u32 elmer;
91
92                 t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
93                 elmer &= ~ELMER0_GP_BIT1;
94                 if (is_T2(cphy->adapter))
95                     elmer &= ~(ELMER0_GP_BIT2|ELMER0_GP_BIT3|ELMER0_GP_BIT4);
96                 t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
97         }
98         return 0;
99 }
100
101 static int mv88e1xxx_interrupt_clear(struct cphy *cphy)
102 {
103         u32 elmer;
104
105         /* Clear PHY interrupts by reading the register. */
106         (void) simple_mdio_read(cphy,
107                         MV88E1XXX_INTERRUPT_STATUS_REGISTER, &elmer);
108
109         /* Clear Marvell interrupts through Elmer0. */
110         if (t1_is_asic(cphy->adapter)) {
111                 t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer);
112                 elmer |= ELMER0_GP_BIT1;
113                 if (is_T2(cphy->adapter))
114                     elmer |= ELMER0_GP_BIT2|ELMER0_GP_BIT3|ELMER0_GP_BIT4;
115                 t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer);
116         }
117         return 0;
118 }
119
120 /*
121  * Set the PHY speed and duplex.  This also disables auto-negotiation, except
122  * for 1Gb/s, where auto-negotiation is mandatory.
123  */
124 static int mv88e1xxx_set_speed_duplex(struct cphy *phy, int speed, int duplex)
125 {
126         u32 ctl;
127
128         (void) simple_mdio_read(phy, MII_BMCR, &ctl);
129         if (speed >= 0) {
130                 ctl &= ~(BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE);
131                 if (speed == SPEED_100)
132                         ctl |= BMCR_SPEED100;
133                 else if (speed == SPEED_1000)
134                         ctl |= BMCR_SPEED1000;
135         }
136         if (duplex >= 0) {
137                 ctl &= ~(BMCR_FULLDPLX | BMCR_ANENABLE);
138                 if (duplex == DUPLEX_FULL)
139                         ctl |= BMCR_FULLDPLX;
140         }
141         if (ctl & BMCR_SPEED1000)  /* auto-negotiation required for 1Gb/s */
142                 ctl |= BMCR_ANENABLE;
143         (void) simple_mdio_write(phy, MII_BMCR, ctl);
144         return 0;
145 }
146
147 static int mv88e1xxx_crossover_set(struct cphy *cphy, int crossover)
148 {
149         u32 data32;
150
151         (void) simple_mdio_read(cphy,
152                         MV88E1XXX_SPECIFIC_CNTRL_REGISTER, &data32);
153         data32 &= ~V_PSCR_MDI_XOVER_MODE(M_PSCR_MDI_XOVER_MODE);
154         data32 |= V_PSCR_MDI_XOVER_MODE(crossover);
155         (void) simple_mdio_write(cphy,
156                         MV88E1XXX_SPECIFIC_CNTRL_REGISTER, data32);
157         return 0;
158 }
159
160 static int mv88e1xxx_autoneg_enable(struct cphy *cphy)
161 {
162         u32 ctl;
163
164         (void) mv88e1xxx_crossover_set(cphy, CROSSOVER_AUTO);
165
166         (void) simple_mdio_read(cphy, MII_BMCR, &ctl);
167         /* restart autoneg for change to take effect */
168         ctl |= BMCR_ANENABLE | BMCR_ANRESTART;
169         (void) simple_mdio_write(cphy, MII_BMCR, ctl);
170         return 0;
171 }
172
173 static int mv88e1xxx_autoneg_disable(struct cphy *cphy)
174 {
175         u32 ctl;
176
177         /*
178          * Crossover *must* be set to manual in order to disable auto-neg.
179          * The Alaska FAQs document highlights this point.
180          */
181         (void) mv88e1xxx_crossover_set(cphy, CROSSOVER_MDI);
182
183         /*
184          * Must include autoneg reset when disabling auto-neg. This
185          * is described in the Alaska FAQ document.
186          */
187         (void) simple_mdio_read(cphy, MII_BMCR, &ctl);
188         ctl &= ~BMCR_ANENABLE;
189         (void) simple_mdio_write(cphy, MII_BMCR, ctl | BMCR_ANRESTART);
190         return 0;
191 }
192
193 static int mv88e1xxx_autoneg_restart(struct cphy *cphy)
194 {
195         mdio_set_bit(cphy, MII_BMCR, BMCR_ANRESTART);
196         return 0;
197 }
198
199 static int mv88e1xxx_advertise(struct cphy *phy, unsigned int advertise_map)
200 {
201         u32 val = 0;
202
203         if (advertise_map &
204             (ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full)) {
205                 (void) simple_mdio_read(phy, MII_GBCR, &val);
206                 val &= ~(GBCR_ADV_1000HALF | GBCR_ADV_1000FULL);
207                 if (advertise_map & ADVERTISED_1000baseT_Half)
208                         val |= GBCR_ADV_1000HALF;
209                 if (advertise_map & ADVERTISED_1000baseT_Full)
210                         val |= GBCR_ADV_1000FULL;
211         }
212         (void) simple_mdio_write(phy, MII_GBCR, val);
213
214         val = 1;
215         if (advertise_map & ADVERTISED_10baseT_Half)
216                 val |= ADVERTISE_10HALF;
217         if (advertise_map & ADVERTISED_10baseT_Full)
218                 val |= ADVERTISE_10FULL;
219         if (advertise_map & ADVERTISED_100baseT_Half)
220                 val |= ADVERTISE_100HALF;
221         if (advertise_map & ADVERTISED_100baseT_Full)
222                 val |= ADVERTISE_100FULL;
223         if (advertise_map & ADVERTISED_PAUSE)
224                 val |= ADVERTISE_PAUSE;
225         if (advertise_map & ADVERTISED_ASYM_PAUSE)
226                 val |= ADVERTISE_PAUSE_ASYM;
227         (void) simple_mdio_write(phy, MII_ADVERTISE, val);
228         return 0;
229 }
230
231 static int mv88e1xxx_set_loopback(struct cphy *cphy, int on)
232 {
233         if (on)
234                 mdio_set_bit(cphy, MII_BMCR, BMCR_LOOPBACK);
235         else
236                 mdio_clear_bit(cphy, MII_BMCR, BMCR_LOOPBACK);
237         return 0;
238 }
239
240 static int mv88e1xxx_get_link_status(struct cphy *cphy, int *link_ok,
241                                      int *speed, int *duplex, int *fc)
242 {
243         u32 status;
244         int sp = -1, dplx = -1, pause = 0;
245
246         (void) simple_mdio_read(cphy,
247                         MV88E1XXX_SPECIFIC_STATUS_REGISTER, &status);
248         if ((status & V_PSSR_STATUS_RESOLVED) != 0) {
249                 if (status & V_PSSR_RX_PAUSE)
250                         pause |= PAUSE_RX;
251                 if (status & V_PSSR_TX_PAUSE)
252                         pause |= PAUSE_TX;
253                 dplx = (status & V_PSSR_DUPLEX) ? DUPLEX_FULL : DUPLEX_HALF;
254                 sp = G_PSSR_SPEED(status);
255                 if (sp == 0)
256                         sp = SPEED_10;
257                 else if (sp == 1)
258                         sp = SPEED_100;
259                 else
260                         sp = SPEED_1000;
261         }
262         if (link_ok)
263                 *link_ok = (status & V_PSSR_LINK) != 0;
264         if (speed)
265                 *speed = sp;
266         if (duplex)
267                 *duplex = dplx;
268         if (fc)
269                 *fc = pause;
270         return 0;
271 }
272
273 static int mv88e1xxx_downshift_set(struct cphy *cphy, int downshift_enable)
274 {
275         u32 val;
276
277         (void) simple_mdio_read(cphy,
278                 MV88E1XXX_EXT_PHY_SPECIFIC_CNTRL_REGISTER, &val);
279
280         /*
281          * Set the downshift counter to 2 so we try to establish Gb link
282          * twice before downshifting.
283          */
284         val &= ~(V_DOWNSHIFT_ENABLE | V_DOWNSHIFT_CNT(M_DOWNSHIFT_CNT));
285
286         if (downshift_enable)
287                 val |= V_DOWNSHIFT_ENABLE | V_DOWNSHIFT_CNT(2);
288         (void) simple_mdio_write(cphy,
289                         MV88E1XXX_EXT_PHY_SPECIFIC_CNTRL_REGISTER, val);
290         return 0;
291 }
292
293 static int mv88e1xxx_interrupt_handler(struct cphy *cphy)
294 {
295         int cphy_cause = 0;
296         u32 status;
297
298         /*
299          * Loop until cause reads zero. Need to handle bouncing interrupts.
300          */
301         while (1) {
302                 u32 cause;
303
304                 (void) simple_mdio_read(cphy,
305                                 MV88E1XXX_INTERRUPT_STATUS_REGISTER,
306                                 &cause);
307                 cause &= INTR_ENABLE_MASK;
308                 if (!cause)
309                         break;
310
311                 if (cause & MV88E1XXX_INTR_LINK_CHNG) {
312                         (void) simple_mdio_read(cphy,
313                                 MV88E1XXX_SPECIFIC_STATUS_REGISTER, &status);
314
315                         if (status & MV88E1XXX_INTR_LINK_CHNG)
316                                 cphy->state |= PHY_LINK_UP;
317                         else {
318                                 cphy->state &= ~PHY_LINK_UP;
319                                 if (cphy->state & PHY_AUTONEG_EN)
320                                         cphy->state &= ~PHY_AUTONEG_RDY;
321                                 cphy_cause |= cphy_cause_link_change;
322                         }
323                 }
324
325                 if (cause & MV88E1XXX_INTR_AUTONEG_DONE)
326                         cphy->state |= PHY_AUTONEG_RDY;
327
328                 if ((cphy->state & (PHY_LINK_UP | PHY_AUTONEG_RDY)) ==
329                         (PHY_LINK_UP | PHY_AUTONEG_RDY))
330                                 cphy_cause |= cphy_cause_link_change;
331         }
332         return cphy_cause;
333 }
334
335 static void mv88e1xxx_destroy(struct cphy *cphy)
336 {
337         kfree(cphy);
338 }
339
340 static struct cphy_ops mv88e1xxx_ops = {
341         .destroy              = mv88e1xxx_destroy,
342         .reset                = mv88e1xxx_reset,
343         .interrupt_enable     = mv88e1xxx_interrupt_enable,
344         .interrupt_disable    = mv88e1xxx_interrupt_disable,
345         .interrupt_clear      = mv88e1xxx_interrupt_clear,
346         .interrupt_handler    = mv88e1xxx_interrupt_handler,
347         .autoneg_enable       = mv88e1xxx_autoneg_enable,
348         .autoneg_disable      = mv88e1xxx_autoneg_disable,
349         .autoneg_restart      = mv88e1xxx_autoneg_restart,
350         .advertise            = mv88e1xxx_advertise,
351         .set_loopback         = mv88e1xxx_set_loopback,
352         .set_speed_duplex     = mv88e1xxx_set_speed_duplex,
353         .get_link_status      = mv88e1xxx_get_link_status,
354 };
355
356 static struct cphy *mv88e1xxx_phy_create(adapter_t *adapter, int phy_addr,
357                                          const struct mdio_ops *mdio_ops)
358 {
359         struct cphy *cphy = kzalloc(sizeof(*cphy), GFP_KERNEL);
360
361         if (!cphy)
362                 return NULL;
363
364         cphy_init(cphy, adapter, phy_addr, &mv88e1xxx_ops, mdio_ops);
365
366         /* Configure particular PHY's to run in a different mode. */
367         if ((board_info(adapter)->caps & SUPPORTED_TP) &&
368             board_info(adapter)->chip_phy == CHBT_PHY_88E1111) {
369                 /*
370                  * Configure the PHY transmitter as class A to reduce EMI.
371                  */
372                 (void) simple_mdio_write(cphy,
373                                 MV88E1XXX_EXTENDED_ADDR_REGISTER, 0xB);
374                 (void) simple_mdio_write(cphy,
375                                 MV88E1XXX_EXTENDED_REGISTER, 0x8004);
376         }
377         (void) mv88e1xxx_downshift_set(cphy, 1);   /* Enable downshift */
378
379         /* LED */
380         if (is_T2(adapter)) {
381                 (void) simple_mdio_write(cphy,
382                                 MV88E1XXX_LED_CONTROL_REGISTER, 0x1);
383         }
384
385         return cphy;
386 }
387
388 static int mv88e1xxx_phy_reset(adapter_t* adapter)
389 {
390         return 0;
391 }
392
393 const struct gphy t1_mv88e1xxx_ops = {
394         .create = mv88e1xxx_phy_create,
395         .reset =  mv88e1xxx_phy_reset
396 };