Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes...
[linux-2.6] / include / linux / interrupt.h
1 /* interrupt.h */
2 #ifndef _LINUX_INTERRUPT_H
3 #define _LINUX_INTERRUPT_H
4
5 #include <linux/kernel.h>
6 #include <linux/linkage.h>
7 #include <linux/bitops.h>
8 #include <linux/preempt.h>
9 #include <linux/cpumask.h>
10 #include <linux/irqreturn.h>
11 #include <linux/irqnr.h>
12 #include <linux/hardirq.h>
13 #include <linux/sched.h>
14 #include <linux/irqflags.h>
15 #include <linux/smp.h>
16 #include <linux/percpu.h>
17
18 #include <asm/atomic.h>
19 #include <asm/ptrace.h>
20 #include <asm/system.h>
21
22 /*
23  * These correspond to the IORESOURCE_IRQ_* defines in
24  * linux/ioport.h to select the interrupt line behaviour.  When
25  * requesting an interrupt without specifying a IRQF_TRIGGER, the
26  * setting should be assumed to be "as already configured", which
27  * may be as per machine or firmware initialisation.
28  */
29 #define IRQF_TRIGGER_NONE       0x00000000
30 #define IRQF_TRIGGER_RISING     0x00000001
31 #define IRQF_TRIGGER_FALLING    0x00000002
32 #define IRQF_TRIGGER_HIGH       0x00000004
33 #define IRQF_TRIGGER_LOW        0x00000008
34 #define IRQF_TRIGGER_MASK       (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW | \
35                                  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)
36 #define IRQF_TRIGGER_PROBE      0x00000010
37
38 /*
39  * These flags used only by the kernel as part of the
40  * irq handling routines.
41  *
42  * IRQF_DISABLED - keep irqs disabled when calling the action handler
43  * IRQF_SAMPLE_RANDOM - irq is used to feed the random generator
44  * IRQF_SHARED - allow sharing the irq among several devices
45  * IRQF_PROBE_SHARED - set by callers when they expect sharing mismatches to occur
46  * IRQF_TIMER - Flag to mark this interrupt as timer interrupt
47  * IRQF_PERCPU - Interrupt is per cpu
48  * IRQF_NOBALANCING - Flag to exclude this interrupt from irq balancing
49  * IRQF_IRQPOLL - Interrupt is used for polling (only the interrupt that is
50  *                registered first in an shared interrupt is considered for
51  *                performance reasons)
52  */
53 #define IRQF_DISABLED           0x00000020
54 #define IRQF_SAMPLE_RANDOM      0x00000040
55 #define IRQF_SHARED             0x00000080
56 #define IRQF_PROBE_SHARED       0x00000100
57 #define IRQF_TIMER              0x00000200
58 #define IRQF_PERCPU             0x00000400
59 #define IRQF_NOBALANCING        0x00000800
60 #define IRQF_IRQPOLL            0x00001000
61
62 typedef irqreturn_t (*irq_handler_t)(int, void *);
63
64 /**
65  * struct irqaction - per interrupt action descriptor
66  * @handler:    interrupt handler function
67  * @flags:      flags (see IRQF_* above)
68  * @mask:       no comment as it is useless and about to be removed
69  * @name:       name of the device
70  * @dev_id:     cookie to identify the device
71  * @next:       pointer to the next irqaction for shared interrupts
72  * @irq:        interrupt number
73  * @dir:        pointer to the proc/irq/NN/name entry
74  */
75 struct irqaction {
76         irq_handler_t handler;
77         unsigned long flags;
78         cpumask_t mask;
79         const char *name;
80         void *dev_id;
81         struct irqaction *next;
82         int irq;
83         struct proc_dir_entry *dir;
84 };
85
86 extern irqreturn_t no_action(int cpl, void *dev_id);
87 extern int __must_check request_irq(unsigned int, irq_handler_t handler,
88                        unsigned long, const char *, void *);
89 extern void free_irq(unsigned int, void *);
90
91 struct device;
92
93 extern int __must_check devm_request_irq(struct device *dev, unsigned int irq,
94                             irq_handler_t handler, unsigned long irqflags,
95                             const char *devname, void *dev_id);
96 extern void devm_free_irq(struct device *dev, unsigned int irq, void *dev_id);
97
98 /*
99  * On lockdep we dont want to enable hardirqs in hardirq
100  * context. Use local_irq_enable_in_hardirq() to annotate
101  * kernel code that has to do this nevertheless (pretty much
102  * the only valid case is for old/broken hardware that is
103  * insanely slow).
104  *
105  * NOTE: in theory this might break fragile code that relies
106  * on hardirq delivery - in practice we dont seem to have such
107  * places left. So the only effect should be slightly increased
108  * irqs-off latencies.
109  */
110 #ifdef CONFIG_LOCKDEP
111 # define local_irq_enable_in_hardirq()  do { } while (0)
112 #else
113 # define local_irq_enable_in_hardirq()  local_irq_enable()
114 #endif
115
116 extern void disable_irq_nosync(unsigned int irq);
117 extern void disable_irq(unsigned int irq);
118 extern void enable_irq(unsigned int irq);
119
120 /* The following three functions are for the core kernel use only. */
121 extern void suspend_device_irqs(void);
122 extern void resume_device_irqs(void);
123 #ifdef CONFIG_PM_SLEEP
124 extern int check_wakeup_irqs(void);
125 #else
126 static inline int check_wakeup_irqs(void) { return 0; }
127 #endif
128
129 #if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS)
130
131 extern cpumask_var_t irq_default_affinity;
132
133 extern int irq_set_affinity(unsigned int irq, const struct cpumask *cpumask);
134 extern int irq_can_set_affinity(unsigned int irq);
135 extern int irq_select_affinity(unsigned int irq);
136
137 #else /* CONFIG_SMP */
138
139 static inline int irq_set_affinity(unsigned int irq, const struct cpumask *m)
140 {
141         return -EINVAL;
142 }
143
144 static inline int irq_can_set_affinity(unsigned int irq)
145 {
146         return 0;
147 }
148
149 static inline int irq_select_affinity(unsigned int irq)  { return 0; }
150
151 #endif /* CONFIG_SMP && CONFIG_GENERIC_HARDIRQS */
152
153 #ifdef CONFIG_GENERIC_HARDIRQS
154 /*
155  * Special lockdep variants of irq disabling/enabling.
156  * These should be used for locking constructs that
157  * know that a particular irq context which is disabled,
158  * and which is the only irq-context user of a lock,
159  * that it's safe to take the lock in the irq-disabled
160  * section without disabling hardirqs.
161  *
162  * On !CONFIG_LOCKDEP they are equivalent to the normal
163  * irq disable/enable methods.
164  */
165 static inline void disable_irq_nosync_lockdep(unsigned int irq)
166 {
167         disable_irq_nosync(irq);
168 #ifdef CONFIG_LOCKDEP
169         local_irq_disable();
170 #endif
171 }
172
173 static inline void disable_irq_nosync_lockdep_irqsave(unsigned int irq, unsigned long *flags)
174 {
175         disable_irq_nosync(irq);
176 #ifdef CONFIG_LOCKDEP
177         local_irq_save(*flags);
178 #endif
179 }
180
181 static inline void disable_irq_lockdep(unsigned int irq)
182 {
183         disable_irq(irq);
184 #ifdef CONFIG_LOCKDEP
185         local_irq_disable();
186 #endif
187 }
188
189 static inline void enable_irq_lockdep(unsigned int irq)
190 {
191 #ifdef CONFIG_LOCKDEP
192         local_irq_enable();
193 #endif
194         enable_irq(irq);
195 }
196
197 static inline void enable_irq_lockdep_irqrestore(unsigned int irq, unsigned long *flags)
198 {
199 #ifdef CONFIG_LOCKDEP
200         local_irq_restore(*flags);
201 #endif
202         enable_irq(irq);
203 }
204
205 /* IRQ wakeup (PM) control: */
206 extern int set_irq_wake(unsigned int irq, unsigned int on);
207
208 static inline int enable_irq_wake(unsigned int irq)
209 {
210         return set_irq_wake(irq, 1);
211 }
212
213 static inline int disable_irq_wake(unsigned int irq)
214 {
215         return set_irq_wake(irq, 0);
216 }
217
218 #else /* !CONFIG_GENERIC_HARDIRQS */
219 /*
220  * NOTE: non-genirq architectures, if they want to support the lock
221  * validator need to define the methods below in their asm/irq.h
222  * files, under an #ifdef CONFIG_LOCKDEP section.
223  */
224 #ifndef CONFIG_LOCKDEP
225 #  define disable_irq_nosync_lockdep(irq)       disable_irq_nosync(irq)
226 #  define disable_irq_nosync_lockdep_irqsave(irq, flags) \
227                                                 disable_irq_nosync(irq)
228 #  define disable_irq_lockdep(irq)              disable_irq(irq)
229 #  define enable_irq_lockdep(irq)               enable_irq(irq)
230 #  define enable_irq_lockdep_irqrestore(irq, flags) \
231                                                 enable_irq(irq)
232 # endif
233
234 static inline int enable_irq_wake(unsigned int irq)
235 {
236         return 0;
237 }
238
239 static inline int disable_irq_wake(unsigned int irq)
240 {
241         return 0;
242 }
243 #endif /* CONFIG_GENERIC_HARDIRQS */
244
245 #ifndef __ARCH_SET_SOFTIRQ_PENDING
246 #define set_softirq_pending(x) (local_softirq_pending() = (x))
247 #define or_softirq_pending(x)  (local_softirq_pending() |= (x))
248 #endif
249
250 /* Some architectures might implement lazy enabling/disabling of
251  * interrupts. In some cases, such as stop_machine, we might want
252  * to ensure that after a local_irq_disable(), interrupts have
253  * really been disabled in hardware. Such architectures need to
254  * implement the following hook.
255  */
256 #ifndef hard_irq_disable
257 #define hard_irq_disable()      do { } while(0)
258 #endif
259
260 /* PLEASE, avoid to allocate new softirqs, if you need not _really_ high
261    frequency threaded job scheduling. For almost all the purposes
262    tasklets are more than enough. F.e. all serial device BHs et
263    al. should be converted to tasklets, not to softirqs.
264  */
265
266 enum
267 {
268         HI_SOFTIRQ=0,
269         TIMER_SOFTIRQ,
270         NET_TX_SOFTIRQ,
271         NET_RX_SOFTIRQ,
272         BLOCK_SOFTIRQ,
273         TASKLET_SOFTIRQ,
274         SCHED_SOFTIRQ,
275         HRTIMER_SOFTIRQ,
276         RCU_SOFTIRQ,    /* Preferable RCU should always be the last softirq */
277
278         NR_SOFTIRQS
279 };
280
281 /* map softirq index to softirq name. update 'softirq_to_name' in
282  * kernel/softirq.c when adding a new softirq.
283  */
284 extern char *softirq_to_name[NR_SOFTIRQS];
285
286 /* softirq mask and active fields moved to irq_cpustat_t in
287  * asm/hardirq.h to get better cache usage.  KAO
288  */
289
290 struct softirq_action
291 {
292         void    (*action)(struct softirq_action *);
293 };
294
295 asmlinkage void do_softirq(void);
296 asmlinkage void __do_softirq(void);
297 extern void open_softirq(int nr, void (*action)(struct softirq_action *));
298 extern void softirq_init(void);
299 #define __raise_softirq_irqoff(nr) do { or_softirq_pending(1UL << (nr)); } while (0)
300 extern void raise_softirq_irqoff(unsigned int nr);
301 extern void raise_softirq(unsigned int nr);
302 extern void wakeup_softirqd(void);
303
304 /* This is the worklist that queues up per-cpu softirq work.
305  *
306  * send_remote_sendirq() adds work to these lists, and
307  * the softirq handler itself dequeues from them.  The queues
308  * are protected by disabling local cpu interrupts and they must
309  * only be accessed by the local cpu that they are for.
310  */
311 DECLARE_PER_CPU(struct list_head [NR_SOFTIRQS], softirq_work_list);
312
313 /* Try to send a softirq to a remote cpu.  If this cannot be done, the
314  * work will be queued to the local cpu.
315  */
316 extern void send_remote_softirq(struct call_single_data *cp, int cpu, int softirq);
317
318 /* Like send_remote_softirq(), but the caller must disable local cpu interrupts
319  * and compute the current cpu, passed in as 'this_cpu'.
320  */
321 extern void __send_remote_softirq(struct call_single_data *cp, int cpu,
322                                   int this_cpu, int softirq);
323
324 /* Tasklets --- multithreaded analogue of BHs.
325
326    Main feature differing them of generic softirqs: tasklet
327    is running only on one CPU simultaneously.
328
329    Main feature differing them of BHs: different tasklets
330    may be run simultaneously on different CPUs.
331
332    Properties:
333    * If tasklet_schedule() is called, then tasklet is guaranteed
334      to be executed on some cpu at least once after this.
335    * If the tasklet is already scheduled, but its excecution is still not
336      started, it will be executed only once.
337    * If this tasklet is already running on another CPU (or schedule is called
338      from tasklet itself), it is rescheduled for later.
339    * Tasklet is strictly serialized wrt itself, but not
340      wrt another tasklets. If client needs some intertask synchronization,
341      he makes it with spinlocks.
342  */
343
344 struct tasklet_struct
345 {
346         struct tasklet_struct *next;
347         unsigned long state;
348         atomic_t count;
349         void (*func)(unsigned long);
350         unsigned long data;
351 };
352
353 #define DECLARE_TASKLET(name, func, data) \
354 struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(0), func, data }
355
356 #define DECLARE_TASKLET_DISABLED(name, func, data) \
357 struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(1), func, data }
358
359
360 enum
361 {
362         TASKLET_STATE_SCHED,    /* Tasklet is scheduled for execution */
363         TASKLET_STATE_RUN       /* Tasklet is running (SMP only) */
364 };
365
366 #ifdef CONFIG_SMP
367 static inline int tasklet_trylock(struct tasklet_struct *t)
368 {
369         return !test_and_set_bit(TASKLET_STATE_RUN, &(t)->state);
370 }
371
372 static inline void tasklet_unlock(struct tasklet_struct *t)
373 {
374         smp_mb__before_clear_bit(); 
375         clear_bit(TASKLET_STATE_RUN, &(t)->state);
376 }
377
378 static inline void tasklet_unlock_wait(struct tasklet_struct *t)
379 {
380         while (test_bit(TASKLET_STATE_RUN, &(t)->state)) { barrier(); }
381 }
382 #else
383 #define tasklet_trylock(t) 1
384 #define tasklet_unlock_wait(t) do { } while (0)
385 #define tasklet_unlock(t) do { } while (0)
386 #endif
387
388 extern void __tasklet_schedule(struct tasklet_struct *t);
389
390 static inline void tasklet_schedule(struct tasklet_struct *t)
391 {
392         if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state))
393                 __tasklet_schedule(t);
394 }
395
396 extern void __tasklet_hi_schedule(struct tasklet_struct *t);
397
398 static inline void tasklet_hi_schedule(struct tasklet_struct *t)
399 {
400         if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state))
401                 __tasklet_hi_schedule(t);
402 }
403
404
405 static inline void tasklet_disable_nosync(struct tasklet_struct *t)
406 {
407         atomic_inc(&t->count);
408         smp_mb__after_atomic_inc();
409 }
410
411 static inline void tasklet_disable(struct tasklet_struct *t)
412 {
413         tasklet_disable_nosync(t);
414         tasklet_unlock_wait(t);
415         smp_mb();
416 }
417
418 static inline void tasklet_enable(struct tasklet_struct *t)
419 {
420         smp_mb__before_atomic_dec();
421         atomic_dec(&t->count);
422 }
423
424 static inline void tasklet_hi_enable(struct tasklet_struct *t)
425 {
426         smp_mb__before_atomic_dec();
427         atomic_dec(&t->count);
428 }
429
430 extern void tasklet_kill(struct tasklet_struct *t);
431 extern void tasklet_kill_immediate(struct tasklet_struct *t, unsigned int cpu);
432 extern void tasklet_init(struct tasklet_struct *t,
433                          void (*func)(unsigned long), unsigned long data);
434
435 /*
436  * Autoprobing for irqs:
437  *
438  * probe_irq_on() and probe_irq_off() provide robust primitives
439  * for accurate IRQ probing during kernel initialization.  They are
440  * reasonably simple to use, are not "fooled" by spurious interrupts,
441  * and, unlike other attempts at IRQ probing, they do not get hung on
442  * stuck interrupts (such as unused PS2 mouse interfaces on ASUS boards).
443  *
444  * For reasonably foolproof probing, use them as follows:
445  *
446  * 1. clear and/or mask the device's internal interrupt.
447  * 2. sti();
448  * 3. irqs = probe_irq_on();      // "take over" all unassigned idle IRQs
449  * 4. enable the device and cause it to trigger an interrupt.
450  * 5. wait for the device to interrupt, using non-intrusive polling or a delay.
451  * 6. irq = probe_irq_off(irqs);  // get IRQ number, 0=none, negative=multiple
452  * 7. service the device to clear its pending interrupt.
453  * 8. loop again if paranoia is required.
454  *
455  * probe_irq_on() returns a mask of allocated irq's.
456  *
457  * probe_irq_off() takes the mask as a parameter,
458  * and returns the irq number which occurred,
459  * or zero if none occurred, or a negative irq number
460  * if more than one irq occurred.
461  */
462
463 #if defined(CONFIG_GENERIC_HARDIRQS) && !defined(CONFIG_GENERIC_IRQ_PROBE) 
464 static inline unsigned long probe_irq_on(void)
465 {
466         return 0;
467 }
468 static inline int probe_irq_off(unsigned long val)
469 {
470         return 0;
471 }
472 static inline unsigned int probe_irq_mask(unsigned long val)
473 {
474         return 0;
475 }
476 #else
477 extern unsigned long probe_irq_on(void);        /* returns 0 on failure */
478 extern int probe_irq_off(unsigned long);        /* returns 0 or negative on failure */
479 extern unsigned int probe_irq_mask(unsigned long);      /* returns mask of ISA interrupts */
480 #endif
481
482 #ifdef CONFIG_PROC_FS
483 /* Initialize /proc/irq/ */
484 extern void init_irq_proc(void);
485 #else
486 static inline void init_irq_proc(void)
487 {
488 }
489 #endif
490
491 #if defined(CONFIG_GENERIC_HARDIRQS) && defined(CONFIG_DEBUG_SHIRQ)
492 extern void debug_poll_all_shared_irqs(void);
493 #else
494 static inline void debug_poll_all_shared_irqs(void) { }
495 #endif
496
497 int show_interrupts(struct seq_file *p, void *v);
498
499 struct irq_desc;
500
501 extern int early_irq_init(void);
502 extern int arch_probe_nr_irqs(void);
503 extern int arch_early_irq_init(void);
504 extern int arch_init_chip_data(struct irq_desc *desc, int cpu);
505
506 #endif