git.oblomov.eu Git - linux-2.6/blob - arch/powerpc/platforms/powermac/cpufreq_32.c

   1 /*
   2  *  Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>
   3  *  Copyright (C) 2004        John Steele Scott <toojays@toojays.net>
   4  *
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License version 2 as
   7  * published by the Free Software Foundation.
   8  *
   9  * TODO: Need a big cleanup here. Basically, we need to have different
  10  * cpufreq_driver structures for the different type of HW instead of the
  11  * current mess. We also need to better deal with the detection of the
  12  * type of machine.
  13  *
  14  */
  15
  16 #include <linux/module.h>
  17 #include <linux/types.h>
  18 #include <linux/errno.h>
  19 #include <linux/kernel.h>
  20 #include <linux/delay.h>
  21 #include <linux/sched.h>
  22 #include <linux/adb.h>
  23 #include <linux/pmu.h>
  24 #include <linux/slab.h>
  25 #include <linux/cpufreq.h>
  26 #include <linux/init.h>
  27 #include <linux/sysdev.h>
  28 #include <linux/hardirq.h>
  29 #include <asm/prom.h>
  30 #include <asm/machdep.h>
  31 #include <asm/irq.h>
  32 #include <asm/pmac_feature.h>
  33 #include <asm/mmu_context.h>
  34 #include <asm/sections.h>
  35 #include <asm/cputable.h>
  36 #include <asm/time.h>
  37 #include <asm/system.h>
  38 #include <asm/mpic.h>
  39 #include <asm/keylargo.h>
  40
  41 /* WARNING !!! This will cause calibrate_delay() to be called,
  42  * but this is an __init function ! So you MUST go edit
  43  * init/main.c to make it non-init before enabling DEBUG_FREQ
  44  */
  45 #undef DEBUG_FREQ
  46
  47 /*
  48  * There is a problem with the core cpufreq code on SMP kernels,
  49  * it won't recalculate the Bogomips properly
  50  */
  51 #ifdef CONFIG_SMP
  52 #warning "WARNING, CPUFREQ not recommended on SMP kernels"
  53 #endif
  54
  55 extern void low_choose_7447a_dfs(int dfs);
  56 extern void low_choose_750fx_pll(int pll);
  57 extern void low_sleep_handler(void);
  58
  59 /*
  60  * Currently, PowerMac cpufreq supports only high & low frequencies
  61  * that are set by the firmware
  62  */
  63 static unsigned int low_freq;
  64 static unsigned int hi_freq;
  65 static unsigned int cur_freq;
  66 static unsigned int sleep_freq;
  67
  68 /*
  69  * Different models uses different mechanisms to switch the frequency
  70  */
  71 static int (*set_speed_proc)(int low_speed);
  72 static unsigned int (*get_speed_proc)(void);
  73
  74 /*
  75  * Some definitions used by the various speedprocs
  76  */
  77 static u32 voltage_gpio;
  78 static u32 frequency_gpio;
  79 static u32 slew_done_gpio;
  80 static int no_schedule;
  81 static int has_cpu_l2lve;
  82 static int is_pmu_based;
  83
  84 /* There are only two frequency states for each processor. Values
  85  * are in kHz for the time being.
  86  */
  87 #define CPUFREQ_HIGH                  0
  88 #define CPUFREQ_LOW                   1
  89
  90 static struct cpufreq_frequency_table pmac_cpu_freqs[] = {
  91         {CPUFREQ_HIGH,          0},
  92         {CPUFREQ_LOW,           0},
  93         {0,                     CPUFREQ_TABLE_END},
  94 };
  95
  96 static struct freq_attr* pmac_cpu_freqs_attr[] = {
  97         &cpufreq_freq_attr_scaling_available_freqs,
  98         NULL,
  99 };
 100
 101 static inline void local_delay(unsigned long ms)
 102 {
 103         if (no_schedule)
 104                 mdelay(ms);
 105         else
 106                 msleep(ms);
 107 }
 108
 109 #ifdef DEBUG_FREQ
 110 static inline void debug_calc_bogomips(void)
 111 {
 112         /* This will cause a recalc of bogomips and display the
 113          * result. We backup/restore the value to avoid affecting the
 114          * core cpufreq framework's own calculation.
 115          */
 116         unsigned long save_lpj = loops_per_jiffy;
 117         calibrate_delay();
 118         loops_per_jiffy = save_lpj;
 119 }
 120 #endif /* DEBUG_FREQ */
 121
 122 /* Switch CPU speed under 750FX CPU control
 123  */
 124 static int cpu_750fx_cpu_speed(int low_speed)
 125 {
 126         u32 hid2;
 127
 128         if (low_speed == 0) {
 129                 /* ramping up, set voltage first */
 130                 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05);
 131                 /* Make sure we sleep for at least 1ms */
 132                 local_delay(10);
 133
 134                 /* tweak L2 for high voltage */
 135                 if (has_cpu_l2lve) {
 136                         hid2 = mfspr(SPRN_HID2);
 137                         hid2 &= ~0x2000;
 138                         mtspr(SPRN_HID2, hid2);
 139                 }
 140         }
 141 #ifdef CONFIG_6xx
 142         low_choose_750fx_pll(low_speed);
 143 #endif
 144         if (low_speed == 1) {
 145                 /* tweak L2 for low voltage */
 146                 if (has_cpu_l2lve) {
 147                         hid2 = mfspr(SPRN_HID2);
 148                         hid2 |= 0x2000;
 149                         mtspr(SPRN_HID2, hid2);
 150                 }
 151
 152                 /* ramping down, set voltage last */
 153                 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04);
 154                 local_delay(10);
 155         }
 156
 157         return 0;
 158 }
 159
 160 static unsigned int cpu_750fx_get_cpu_speed(void)
 161 {
 162         if (mfspr(SPRN_HID1) & HID1_PS)
 163                 return low_freq;
 164         else
 165                 return hi_freq;
 166 }
 167
 168 /* Switch CPU speed using DFS */
 169 static int dfs_set_cpu_speed(int low_speed)
 170 {
 171         if (low_speed == 0) {
 172                 /* ramping up, set voltage first */
 173                 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05);
 174                 /* Make sure we sleep for at least 1ms */
 175                 local_delay(1);
 176         }
 177
 178         /* set frequency */
 179 #ifdef CONFIG_6xx
 180         low_choose_7447a_dfs(low_speed);
 181 #endif
 182         udelay(100);
 183
 184         if (low_speed == 1) {
 185                 /* ramping down, set voltage last */
 186                 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04);
 187                 local_delay(1);
 188         }
 189
 190         return 0;
 191 }
 192
 193 static unsigned int dfs_get_cpu_speed(void)
 194 {
 195         if (mfspr(SPRN_HID1) & HID1_DFS)
 196                 return low_freq;
 197         else
 198                 return hi_freq;
 199 }
 200
 201
 202 /* Switch CPU speed using slewing GPIOs
 203  */
 204 static int gpios_set_cpu_speed(int low_speed)
 205 {
 206         int gpio, timeout = 0;
 207
 208         /* If ramping up, set voltage first */
 209         if (low_speed == 0) {
 210                 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05);
 211                 /* Delay is way too big but it's ok, we schedule */
 212                 local_delay(10);
 213         }
 214
 215         /* Set frequency */
 216         gpio =  pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0);
 217         if (low_speed == ((gpio & 0x01) == 0))
 218                 goto skip;
 219
 220         pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, frequency_gpio,
 221                           low_speed ? 0x04 : 0x05);
 222         udelay(200);
 223         do {
 224                 if (++timeout > 100)
 225                         break;
 226                 local_delay(1);
 227                 gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, slew_done_gpio, 0);
 228         } while((gpio & 0x02) == 0);
 229  skip:
 230         /* If ramping down, set voltage last */
 231         if (low_speed == 1) {
 232                 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04);
 233                 /* Delay is way too big but it's ok, we schedule */
 234                 local_delay(10);
 235         }
 236
 237 #ifdef DEBUG_FREQ
 238         debug_calc_bogomips();
 239 #endif
 240
 241         return 0;
 242 }
 243
 244 /* Switch CPU speed under PMU control
 245  */
 246 static int pmu_set_cpu_speed(int low_speed)
 247 {
 248         struct adb_request req;
 249         unsigned long save_l2cr;
 250         unsigned long save_l3cr;
 251         unsigned int pic_prio;
 252         unsigned long flags;
 253
 254         preempt_disable();
 255
 256 #ifdef DEBUG_FREQ
 257         printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1));
 258 #endif
 259         pmu_suspend();
 260
 261         /* Disable all interrupt sources on openpic */
 262         pic_prio = mpic_cpu_get_priority();
 263         mpic_cpu_set_priority(0xf);
 264
 265         /* Make sure the decrementer won't interrupt us */
 266         asm volatile("mtdec %0" : : "r" (0x7fffffff));
 267         /* Make sure any pending DEC interrupt occurring while we did
 268          * the above didn't re-enable the DEC */
 269         mb();
 270         asm volatile("mtdec %0" : : "r" (0x7fffffff));
 271
 272         /* We can now disable MSR_EE */
 273         local_irq_save(flags);
 274
 275         /* Giveup the FPU & vec */
 276         enable_kernel_fp();
 277
 278 #ifdef CONFIG_ALTIVEC
 279         if (cpu_has_feature(CPU_FTR_ALTIVEC))
 280                 enable_kernel_altivec();
 281 #endif /* CONFIG_ALTIVEC */
 282
 283         /* Save & disable L2 and L3 caches */
 284         save_l3cr = _get_L3CR();        /* (returns -1 if not available) */
 285         save_l2cr = _get_L2CR();        /* (returns -1 if not available) */
 286
 287         /* Send the new speed command. My assumption is that this command
 288          * will cause PLL_CFG[0..3] to be changed next time CPU goes to sleep
 289          */
 290         pmu_request(&req, NULL, 6, PMU_CPU_SPEED, 'W', 'O', 'O', 'F', low_speed);
 291         while (!req.complete)
 292                 pmu_poll();
 293
 294         /* Prepare the northbridge for the speed transition */
 295         pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,1);
 296
 297         /* Call low level code to backup CPU state and recover from
 298          * hardware reset
 299          */
 300         low_sleep_handler();
 301
 302         /* Restore the northbridge */
 303         pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,0);
 304
 305         /* Restore L2 cache */
 306         if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0)
 307                 _set_L2CR(save_l2cr);
 308         /* Restore L3 cache */
 309         if (save_l3cr != 0xffffffff && (save_l3cr & L3CR_L3E) != 0)
 310                 _set_L3CR(save_l3cr);
 311
 312         /* Restore userland MMU context */
 313         set_context(current->active_mm->context.id, current->active_mm->pgd);
 314
 315 #ifdef DEBUG_FREQ
 316         printk(KERN_DEBUG "HID1, after: %x\n", mfspr(SPRN_HID1));
 317 #endif
 318
 319         /* Restore low level PMU operations */
 320         pmu_unlock();
 321
 322         /* Restore decrementer */
 323         wakeup_decrementer();
 324
 325         /* Restore interrupts */
 326         mpic_cpu_set_priority(pic_prio);
 327
 328         /* Let interrupts flow again ... */
 329         local_irq_restore(flags);
 330
 331 #ifdef DEBUG_FREQ
 332         debug_calc_bogomips();
 333 #endif
 334
 335         pmu_resume();
 336
 337         preempt_enable();
 338
 339         return 0;
 340 }
 341
 342 static int do_set_cpu_speed(int speed_mode, int notify)
 343 {
 344         struct cpufreq_freqs freqs;
 345         unsigned long l3cr;
 346         static unsigned long prev_l3cr;
 347
 348         freqs.old = cur_freq;
 349         freqs.new = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq;
 350         freqs.cpu = smp_processor_id();
 351
 352         if (freqs.old == freqs.new)
 353                 return 0;
 354
 355         if (notify)
 356                 cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 357         if (speed_mode == CPUFREQ_LOW &&
 358             cpu_has_feature(CPU_FTR_L3CR)) {
 359                 l3cr = _get_L3CR();
 360                 if (l3cr & L3CR_L3E) {
 361                         prev_l3cr = l3cr;
 362                         _set_L3CR(0);
 363                 }
 364         }
 365         set_speed_proc(speed_mode == CPUFREQ_LOW);
 366         if (speed_mode == CPUFREQ_HIGH &&
 367             cpu_has_feature(CPU_FTR_L3CR)) {
 368                 l3cr = _get_L3CR();
 369                 if ((prev_l3cr & L3CR_L3E) && l3cr != prev_l3cr)
 370                         _set_L3CR(prev_l3cr);
 371         }
 372         if (notify)
 373                 cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 374         cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq;
 375
 376         return 0;
 377 }
 378
 379 static unsigned int pmac_cpufreq_get_speed(unsigned int cpu)
 380 {
 381         return cur_freq;
 382 }
 383
 384 static int pmac_cpufreq_verify(struct cpufreq_policy *policy)
 385 {
 386         return cpufreq_frequency_table_verify(policy, pmac_cpu_freqs);
 387 }
 388
 389 static int pmac_cpufreq_target( struct cpufreq_policy *policy,
 390                                         unsigned int target_freq,
 391                                         unsigned int relation)
 392 {
 393         unsigned int    newstate = 0;
 394         int             rc;
 395
 396         if (cpufreq_frequency_table_target(policy, pmac_cpu_freqs,
 397                         target_freq, relation, &newstate))
 398                 return -EINVAL;
 399
 400         rc = do_set_cpu_speed(newstate, 1);
 401
 402         ppc_proc_freq = cur_freq * 1000ul;
 403         return rc;
 404 }
 405
 406 static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy)
 407 {
 408         if (policy->cpu != 0)
 409                 return -ENODEV;
 410
 411         policy->cpuinfo.transition_latency      = CPUFREQ_ETERNAL;
 412         policy->cur = cur_freq;
 413
 414         cpufreq_frequency_table_get_attr(pmac_cpu_freqs, policy->cpu);
 415         return cpufreq_frequency_table_cpuinfo(policy, pmac_cpu_freqs);
 416 }
 417
 418 static u32 read_gpio(struct device_node *np)
 419 {
 420         const u32 *reg = of_get_property(np, "reg", NULL);
 421         u32 offset;
 422
 423         if (reg == NULL)
 424                 return 0;
 425         /* That works for all keylargos but shall be fixed properly
 426          * some day... The problem is that it seems we can't rely
 427          * on the "reg" property of the GPIO nodes, they are either
 428          * relative to the base of KeyLargo or to the base of the
 429          * GPIO space, and the device-tree doesn't help.
 430          */
 431         offset = *reg;
 432         if (offset < KEYLARGO_GPIO_LEVELS0)
 433                 offset += KEYLARGO_GPIO_LEVELS0;
 434         return offset;
 435 }
 436
 437 static int pmac_cpufreq_suspend(struct cpufreq_policy *policy, pm_message_t pmsg)
 438 {
 439         /* Ok, this could be made a bit smarter, but let's be robust for now. We
 440          * always force a speed change to high speed before sleep, to make sure
 441          * we have appropriate voltage and/or bus speed for the wakeup process,
 442          * and to make sure our loops_per_jiffies are "good enough", that is will
 443          * not cause too short delays if we sleep in low speed and wake in high
 444          * speed..
 445          */
 446         no_schedule = 1;
 447         sleep_freq = cur_freq;
 448         if (cur_freq == low_freq && !is_pmu_based)
 449                 do_set_cpu_speed(CPUFREQ_HIGH, 0);
 450         return 0;
 451 }
 452
 453 static int pmac_cpufreq_resume(struct cpufreq_policy *policy)
 454 {
 455         /* If we resume, first check if we have a get() function */
 456         if (get_speed_proc)
 457                 cur_freq = get_speed_proc();
 458         else
 459                 cur_freq = 0;
 460
 461         /* We don't, hrm... we don't really know our speed here, best
 462          * is that we force a switch to whatever it was, which is
 463          * probably high speed due to our suspend() routine
 464          */
 465         do_set_cpu_speed(sleep_freq == low_freq ?
 466                          CPUFREQ_LOW : CPUFREQ_HIGH, 0);
 467
 468         ppc_proc_freq = cur_freq * 1000ul;
 469
 470         no_schedule = 0;
 471         return 0;
 472 }
 473
 474 static struct cpufreq_driver pmac_cpufreq_driver = {
 475         .verify         = pmac_cpufreq_verify,
 476         .target         = pmac_cpufreq_target,
 477         .get            = pmac_cpufreq_get_speed,
 478         .init           = pmac_cpufreq_cpu_init,
 479         .suspend        = pmac_cpufreq_suspend,
 480         .resume         = pmac_cpufreq_resume,
 481         .flags          = CPUFREQ_PM_NO_WARN,
 482         .attr           = pmac_cpu_freqs_attr,
 483         .name           = "powermac",
 484         .owner          = THIS_MODULE,
 485 };
 486
 487
 488 static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode)
 489 {
 490         struct device_node *volt_gpio_np = of_find_node_by_name(NULL,
 491                                                                 "voltage-gpio");
 492         struct device_node *freq_gpio_np = of_find_node_by_name(NULL,
 493                                                                 "frequency-gpio");
 494         struct device_node *slew_done_gpio_np = of_find_node_by_name(NULL,
 495                                                                      "slewing-done");
 496         const u32 *value;
 497
 498         /*
 499          * Check to see if it's GPIO driven or PMU only
 500          *
 501          * The way we extract the GPIO address is slightly hackish, but it
 502          * works well enough for now. We need to abstract the whole GPIO
 503          * stuff sooner or later anyway
 504          */
 505
 506         if (volt_gpio_np)
 507                 voltage_gpio = read_gpio(volt_gpio_np);
 508         if (freq_gpio_np)
 509                 frequency_gpio = read_gpio(freq_gpio_np);
 510         if (slew_done_gpio_np)
 511                 slew_done_gpio = read_gpio(slew_done_gpio_np);
 512
 513         /* If we use the frequency GPIOs, calculate the min/max speeds based
 514          * on the bus frequencies
 515          */
 516         if (frequency_gpio && slew_done_gpio) {
 517                 int lenp, rc;
 518                 const u32 *freqs, *ratio;
 519
 520                 freqs = of_get_property(cpunode, "bus-frequencies", &lenp);
 521                 lenp /= sizeof(u32);
 522                 if (freqs == NULL || lenp != 2) {
 523                         printk(KERN_ERR "cpufreq: bus-frequencies incorrect or missing\n");
 524                         return 1;
 525                 }
 526                 ratio = of_get_property(cpunode, "processor-to-bus-ratio*2",
 527                                                 NULL);
 528                 if (ratio == NULL) {
 529                         printk(KERN_ERR "cpufreq: processor-to-bus-ratio*2 missing\n");
 530                         return 1;
 531                 }
 532
 533                 /* Get the min/max bus frequencies */
 534                 low_freq = min(freqs[0], freqs[1]);
 535                 hi_freq = max(freqs[0], freqs[1]);
 536
 537                 /* Grrrr.. It _seems_ that the device-tree is lying on the low bus
 538                  * frequency, it claims it to be around 84Mhz on some models while
 539                  * it appears to be approx. 101Mhz on all. Let's hack around here...
 540                  * fortunately, we don't need to be too precise
 541                  */
 542                 if (low_freq < 98000000)
 543                         low_freq = 101000000;
 544
 545                 /* Convert those to CPU core clocks */
 546                 low_freq = (low_freq * (*ratio)) / 2000;
 547                 hi_freq = (hi_freq * (*ratio)) / 2000;
 548
 549                 /* Now we get the frequencies, we read the GPIO to see what is out current
 550                  * speed
 551                  */
 552                 rc = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0);
 553                 cur_freq = (rc & 0x01) ? hi_freq : low_freq;
 554
 555                 set_speed_proc = gpios_set_cpu_speed;
 556                 return 1;
 557         }
 558
 559         /* If we use the PMU, look for the min & max frequencies in the
 560          * device-tree
 561          */
 562         value = of_get_property(cpunode, "min-clock-frequency", NULL);
 563         if (!value)
 564                 return 1;
 565         low_freq = (*value) / 1000;
 566         /* The PowerBook G4 12" (PowerBook6,1) has an error in the device-tree
 567          * here */
 568         if (low_freq < 100000)
 569                 low_freq *= 10;
 570
 571         value = of_get_property(cpunode, "max-clock-frequency", NULL);
 572         if (!value)
 573                 return 1;
 574         hi_freq = (*value) / 1000;
 575         set_speed_proc = pmu_set_cpu_speed;
 576         is_pmu_based = 1;
 577
 578         return 0;
 579 }
 580
 581 static int pmac_cpufreq_init_7447A(struct device_node *cpunode)
 582 {
 583         struct device_node *volt_gpio_np;
 584
 585         if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL)
 586                 return 1;
 587
 588         volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select");
 589         if (volt_gpio_np)
 590                 voltage_gpio = read_gpio(volt_gpio_np);
 591         if (!voltage_gpio){
 592                 printk(KERN_ERR "cpufreq: missing cpu-vcore-select gpio\n");
 593                 return 1;
 594         }
 595
 596         /* OF only reports the high frequency */
 597         hi_freq = cur_freq;
 598         low_freq = cur_freq/2;
 599
 600         /* Read actual frequency from CPU */
 601         cur_freq = dfs_get_cpu_speed();
 602         set_speed_proc = dfs_set_cpu_speed;
 603         get_speed_proc = dfs_get_cpu_speed;
 604
 605         return 0;
 606 }
 607
 608 static int pmac_cpufreq_init_750FX(struct device_node *cpunode)
 609 {
 610         struct device_node *volt_gpio_np;
 611         u32 pvr;
 612         const u32 *value;
 613
 614         if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL)
 615                 return 1;
 616
 617         hi_freq = cur_freq;
 618         value = of_get_property(cpunode, "reduced-clock-frequency", NULL);
 619         if (!value)
 620                 return 1;
 621         low_freq = (*value) / 1000;
 622
 623         volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select");
 624         if (volt_gpio_np)
 625                 voltage_gpio = read_gpio(volt_gpio_np);
 626
 627         pvr = mfspr(SPRN_PVR);
 628         has_cpu_l2lve = !((pvr & 0xf00) == 0x100);
 629
 630         set_speed_proc = cpu_750fx_cpu_speed;
 631         get_speed_proc = cpu_750fx_get_cpu_speed;
 632         cur_freq = cpu_750fx_get_cpu_speed();
 633
 634         return 0;
 635 }
 636
 637 /* Currently, we support the following machines:
 638  *
 639  *  - Titanium PowerBook 1Ghz (PMU based, 667Mhz & 1Ghz)
 640  *  - Titanium PowerBook 800 (PMU based, 667Mhz & 800Mhz)
 641  *  - Titanium PowerBook 400 (PMU based, 300Mhz & 400Mhz)
 642  *  - Titanium PowerBook 500 (PMU based, 300Mhz & 500Mhz)
 643  *  - iBook2 500/600 (PMU based, 400Mhz & 500/600Mhz)
 644  *  - iBook2 700 (CPU based, 400Mhz & 700Mhz, support low voltage)
 645  *  - Recent MacRISC3 laptops
 646  *  - All new machines with 7447A CPUs
 647  */
 648 static int __init pmac_cpufreq_setup(void)
 649 {
 650         struct device_node      *cpunode;
 651         const u32               *value;
 652
 653         if (strstr(cmd_line, "nocpufreq"))
 654                 return 0;
 655
 656         /* Assume only one CPU */
 657         cpunode = of_find_node_by_type(NULL, "cpu");
 658         if (!cpunode)
 659                 goto out;
 660
 661         /* Get current cpu clock freq */
 662         value = of_get_property(cpunode, "clock-frequency", NULL);
 663         if (!value)
 664                 goto out;
 665         cur_freq = (*value) / 1000;
 666
 667         /*  Check for 7447A based MacRISC3 */
 668         if (machine_is_compatible("MacRISC3") &&
 669             of_get_property(cpunode, "dynamic-power-step", NULL) &&
 670             PVR_VER(mfspr(SPRN_PVR)) == 0x8003) {
 671                 pmac_cpufreq_init_7447A(cpunode);
 672         /* Check for other MacRISC3 machines */
 673         } else if (machine_is_compatible("PowerBook3,4") ||
 674                    machine_is_compatible("PowerBook3,5") ||
 675                    machine_is_compatible("MacRISC3")) {
 676                 pmac_cpufreq_init_MacRISC3(cpunode);
 677         /* Else check for iBook2 500/600 */
 678         } else if (machine_is_compatible("PowerBook4,1")) {
 679                 hi_freq = cur_freq;
 680                 low_freq = 400000;
 681                 set_speed_proc = pmu_set_cpu_speed;
 682                 is_pmu_based = 1;
 683         }
 684         /* Else check for TiPb 550 */
 685         else if (machine_is_compatible("PowerBook3,3") && cur_freq == 550000) {
 686                 hi_freq = cur_freq;
 687                 low_freq = 500000;
 688                 set_speed_proc = pmu_set_cpu_speed;
 689                 is_pmu_based = 1;
 690         }
 691         /* Else check for TiPb 400 & 500 */
 692         else if (machine_is_compatible("PowerBook3,2")) {
 693                 /* We only know about the 400 MHz and the 500Mhz model
 694                  * they both have 300 MHz as low frequency
 695                  */
 696                 if (cur_freq < 350000 || cur_freq > 550000)
 697                         goto out;
 698                 hi_freq = cur_freq;
 699                 low_freq = 300000;
 700                 set_speed_proc = pmu_set_cpu_speed;
 701                 is_pmu_based = 1;
 702         }
 703         /* Else check for 750FX */
 704         else if (PVR_VER(mfspr(SPRN_PVR)) == 0x7000)
 705                 pmac_cpufreq_init_750FX(cpunode);
 706 out:
 707         of_node_put(cpunode);
 708         if (set_speed_proc == NULL)
 709                 return -ENODEV;
 710
 711         pmac_cpu_freqs[CPUFREQ_LOW].frequency = low_freq;
 712         pmac_cpu_freqs[CPUFREQ_HIGH].frequency = hi_freq;
 713         ppc_proc_freq = cur_freq * 1000ul;
 714
 715         printk(KERN_INFO "Registering PowerMac CPU frequency driver\n");
 716         printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n",
 717                low_freq/1000, hi_freq/1000, cur_freq/1000);
 718
 719         return cpufreq_register_driver(&pmac_cpufreq_driver);
 720 }
 721
 722 module_init(pmac_cpufreq_setup);
 723