git.oblomov.eu Git - linux-2.6/blob - drivers/usb/host/ehci-hub.c

   1 /*
   2  * Copyright (C) 2001-2004 by David Brownell
   3  *
   4  * This program is free software; you can redistribute it and/or modify it
   5  * under the terms of the GNU General Public License as published by the
   6  * Free Software Foundation; either version 2 of the License, or (at your
   7  * option) any later version.
   8  *
   9  * This program is distributed in the hope that it will be useful, but
  10  * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  11  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  12  * for more details.
  13  *
  14  * You should have received a copy of the GNU General Public License
  15  * along with this program; if not, write to the Free Software Foundation,
  16  * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  17  */
  18
  19 /* this file is part of ehci-hcd.c */
  20
  21 /*-------------------------------------------------------------------------*/
  22
  23 /*
  24  * EHCI Root Hub ... the nonsharable stuff
  25  *
  26  * Registers don't need cpu_to_le32, that happens transparently
  27  */
  28
  29 /*-------------------------------------------------------------------------*/
  30
  31 #ifdef  CONFIG_USB_PERSIST
  32
  33 static int ehci_hub_control(
  34         struct usb_hcd  *hcd,
  35         u16             typeReq,
  36         u16             wValue,
  37         u16             wIndex,
  38         char            *buf,
  39         u16             wLength
  40 );
  41
  42 /* After a power loss, ports that were owned by the companion must be
  43  * reset so that the companion can still own them.
  44  */
  45 static void ehci_handover_companion_ports(struct ehci_hcd *ehci)
  46 {
  47         u32 __iomem     *reg;
  48         u32             status;
  49         int             port;
  50         __le32          buf;
  51         struct usb_hcd  *hcd = ehci_to_hcd(ehci);
  52
  53         if (!ehci->owned_ports)
  54                 return;
  55
  56         /* Give the connections some time to appear */
  57         msleep(20);
  58
  59         port = HCS_N_PORTS(ehci->hcs_params);
  60         while (port--) {
  61                 if (test_bit(port, &ehci->owned_ports)) {
  62                         reg = &ehci->regs->port_status[port];
  63                         status = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
  64
  65                         /* Port already owned by companion? */
  66                         if (status & PORT_OWNER)
  67                                 clear_bit(port, &ehci->owned_ports);
  68                         else if (test_bit(port, &ehci->companion_ports))
  69                                 ehci_writel(ehci, status & ~PORT_PE, reg);
  70                         else
  71                                 ehci_hub_control(hcd, SetPortFeature,
  72                                                 USB_PORT_FEAT_RESET, port + 1,
  73                                                 NULL, 0);
  74                 }
  75         }
  76
  77         if (!ehci->owned_ports)
  78                 return;
  79         msleep(90);             /* Wait for resets to complete */
  80
  81         port = HCS_N_PORTS(ehci->hcs_params);
  82         while (port--) {
  83                 if (test_bit(port, &ehci->owned_ports)) {
  84                         ehci_hub_control(hcd, GetPortStatus,
  85                                         0, port + 1,
  86                                         (char *) &buf, sizeof(buf));
  87
  88                         /* The companion should now own the port,
  89                          * but if something went wrong the port must not
  90                          * remain enabled.
  91                          */
  92                         reg = &ehci->regs->port_status[port];
  93                         status = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
  94                         if (status & PORT_OWNER)
  95                                 ehci_writel(ehci, status | PORT_CSC, reg);
  96                         else {
  97                                 ehci_dbg(ehci, "failed handover port %d: %x\n",
  98                                                 port + 1, status);
  99                                 ehci_writel(ehci, status & ~PORT_PE, reg);
 100                         }
 101                 }
 102         }
 103
 104         ehci->owned_ports = 0;
 105 }
 106
 107 #else   /* CONFIG_USB_PERSIST */
 108
 109 static inline void ehci_handover_companion_ports(struct ehci_hcd *ehci)
 110 { }
 111
 112 #endif
 113
 114 #ifdef  CONFIG_PM
 115
 116 static int ehci_bus_suspend (struct usb_hcd *hcd)
 117 {
 118         struct ehci_hcd         *ehci = hcd_to_ehci (hcd);
 119         int                     port;
 120         int                     mask;
 121
 122         ehci_dbg(ehci, "suspend root hub\n");
 123
 124         if (time_before (jiffies, ehci->next_statechange))
 125                 msleep(5);
 126         del_timer_sync(&ehci->watchdog);
 127         del_timer_sync(&ehci->iaa_watchdog);
 128
 129         port = HCS_N_PORTS (ehci->hcs_params);
 130         spin_lock_irq (&ehci->lock);
 131
 132         /* stop schedules, clean any completed work */
 133         if (HC_IS_RUNNING(hcd->state)) {
 134                 ehci_quiesce (ehci);
 135                 hcd->state = HC_STATE_QUIESCING;
 136         }
 137         ehci->command = ehci_readl(ehci, &ehci->regs->command);
 138         ehci_work(ehci);
 139
 140         /* Unlike other USB host controller types, EHCI doesn't have
 141          * any notion of "global" or bus-wide suspend.  The driver has
 142          * to manually suspend all the active unsuspended ports, and
 143          * then manually resume them in the bus_resume() routine.
 144          */
 145         ehci->bus_suspended = 0;
 146         ehci->owned_ports = 0;
 147         while (port--) {
 148                 u32 __iomem     *reg = &ehci->regs->port_status [port];
 149                 u32             t1 = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
 150                 u32             t2 = t1;
 151
 152                 /* keep track of which ports we suspend */
 153                 if (t1 & PORT_OWNER)
 154                         set_bit(port, &ehci->owned_ports);
 155                 else if ((t1 & PORT_PE) && !(t1 & PORT_SUSPEND)) {
 156                         t2 |= PORT_SUSPEND;
 157                         set_bit(port, &ehci->bus_suspended);
 158                 }
 159
 160                 /* enable remote wakeup on all ports */
 161                 if (device_may_wakeup(&hcd->self.root_hub->dev))
 162                         t2 |= PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E;
 163                 else
 164                         t2 &= ~(PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E);
 165
 166                 if (t1 != t2) {
 167                         ehci_vdbg (ehci, "port %d, %08x -> %08x\n",
 168                                 port + 1, t1, t2);
 169                         ehci_writel(ehci, t2, reg);
 170                 }
 171         }
 172
 173         /* Apparently some devices need a >= 1-uframe delay here */
 174         if (ehci->bus_suspended)
 175                 udelay(150);
 176
 177         /* turn off now-idle HC */
 178         ehci_halt (ehci);
 179         hcd->state = HC_STATE_SUSPENDED;
 180
 181         if (ehci->reclaim)
 182                 end_unlink_async(ehci);
 183
 184         /* allow remote wakeup */
 185         mask = INTR_MASK;
 186         if (!device_may_wakeup(&hcd->self.root_hub->dev))
 187                 mask &= ~STS_PCD;
 188         ehci_writel(ehci, mask, &ehci->regs->intr_enable);
 189         ehci_readl(ehci, &ehci->regs->intr_enable);
 190
 191         ehci->next_statechange = jiffies + msecs_to_jiffies(10);
 192         spin_unlock_irq (&ehci->lock);
 193         return 0;
 194 }
 195
 196
 197 /* caller has locked the root hub, and should reset/reinit on error */
 198 static int ehci_bus_resume (struct usb_hcd *hcd)
 199 {
 200         struct ehci_hcd         *ehci = hcd_to_ehci (hcd);
 201         u32                     temp;
 202         u32                     power_okay;
 203         int                     i;
 204
 205         if (time_before (jiffies, ehci->next_statechange))
 206                 msleep(5);
 207         spin_lock_irq (&ehci->lock);
 208         if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
 209                 spin_unlock_irq(&ehci->lock);
 210                 return -ESHUTDOWN;
 211         }
 212
 213         /* Ideally and we've got a real resume here, and no port's power
 214          * was lost.  (For PCI, that means Vaux was maintained.)  But we
 215          * could instead be restoring a swsusp snapshot -- so that BIOS was
 216          * the last user of the controller, not reset/pm hardware keeping
 217          * state we gave to it.
 218          */
 219         power_okay = ehci_readl(ehci, &ehci->regs->intr_enable);
 220         ehci_dbg(ehci, "resume root hub%s\n",
 221                         power_okay ? "" : " after power loss");
 222
 223         /* at least some APM implementations will try to deliver
 224          * IRQs right away, so delay them until we're ready.
 225          */
 226         ehci_writel(ehci, 0, &ehci->regs->intr_enable);
 227
 228         /* re-init operational registers */
 229         ehci_writel(ehci, 0, &ehci->regs->segment);
 230         ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list);
 231         ehci_writel(ehci, (u32) ehci->async->qh_dma, &ehci->regs->async_next);
 232
 233         /* restore CMD_RUN, framelist size, and irq threshold */
 234         ehci_writel(ehci, ehci->command, &ehci->regs->command);
 235
 236         /* Some controller/firmware combinations need a delay during which
 237          * they set up the port statuses.  See Bugzilla #8190. */
 238         mdelay(8);
 239
 240         /* manually resume the ports we suspended during bus_suspend() */
 241         i = HCS_N_PORTS (ehci->hcs_params);
 242         while (i--) {
 243                 temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
 244                 temp &= ~(PORT_RWC_BITS
 245                         | PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E);
 246                 if (test_bit(i, &ehci->bus_suspended) &&
 247                                 (temp & PORT_SUSPEND)) {
 248                         ehci->reset_done [i] = jiffies + msecs_to_jiffies (20);
 249                         temp |= PORT_RESUME;
 250                 }
 251                 ehci_writel(ehci, temp, &ehci->regs->port_status [i]);
 252         }
 253         i = HCS_N_PORTS (ehci->hcs_params);
 254         mdelay (20);
 255         while (i--) {
 256                 temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
 257                 if (test_bit(i, &ehci->bus_suspended) &&
 258                                 (temp & PORT_SUSPEND)) {
 259                         temp &= ~(PORT_RWC_BITS | PORT_RESUME);
 260                         ehci_writel(ehci, temp, &ehci->regs->port_status [i]);
 261                         ehci_vdbg (ehci, "resumed port %d\n", i + 1);
 262                 }
 263         }
 264         (void) ehci_readl(ehci, &ehci->regs->command);
 265
 266         /* maybe re-activate the schedule(s) */
 267         temp = 0;
 268         if (ehci->async->qh_next.qh)
 269                 temp |= CMD_ASE;
 270         if (ehci->periodic_sched)
 271                 temp |= CMD_PSE;
 272         if (temp) {
 273                 ehci->command |= temp;
 274                 ehci_writel(ehci, ehci->command, &ehci->regs->command);
 275         }
 276
 277         ehci->next_statechange = jiffies + msecs_to_jiffies(5);
 278         hcd->state = HC_STATE_RUNNING;
 279
 280         /* Now we can safely re-enable irqs */
 281         ehci_writel(ehci, INTR_MASK, &ehci->regs->intr_enable);
 282
 283         spin_unlock_irq (&ehci->lock);
 284
 285         if (!power_okay)
 286                 ehci_handover_companion_ports(ehci);
 287         return 0;
 288 }
 289
 290 #else
 291
 292 #define ehci_bus_suspend        NULL
 293 #define ehci_bus_resume         NULL
 294
 295 #endif  /* CONFIG_PM */
 296
 297 /*-------------------------------------------------------------------------*/
 298
 299 /* Display the ports dedicated to the companion controller */
 300 static ssize_t show_companion(struct device *dev,
 301                               struct device_attribute *attr,
 302                               char *buf)
 303 {
 304         struct ehci_hcd         *ehci;
 305         int                     nports, index, n;
 306         int                     count = PAGE_SIZE;
 307         char                    *ptr = buf;
 308
 309         ehci = hcd_to_ehci(bus_to_hcd(dev_get_drvdata(dev)));
 310         nports = HCS_N_PORTS(ehci->hcs_params);
 311
 312         for (index = 0; index < nports; ++index) {
 313                 if (test_bit(index, &ehci->companion_ports)) {
 314                         n = scnprintf(ptr, count, "%d\n", index + 1);
 315                         ptr += n;
 316                         count -= n;
 317                 }
 318         }
 319         return ptr - buf;
 320 }
 321
 322 /*
 323  * Sets the owner of a port
 324  */
 325 static void set_owner(struct ehci_hcd *ehci, int portnum, int new_owner)
 326 {
 327         u32 __iomem             *status_reg;
 328         u32                     port_status;
 329         int                     try;
 330
 331         status_reg = &ehci->regs->port_status[portnum];
 332
 333         /*
 334          * The controller won't set the OWNER bit if the port is
 335          * enabled, so this loop will sometimes require at least two
 336          * iterations: one to disable the port and one to set OWNER.
 337          */
 338         for (try = 4; try > 0; --try) {
 339                 spin_lock_irq(&ehci->lock);
 340                 port_status = ehci_readl(ehci, status_reg);
 341                 if ((port_status & PORT_OWNER) == new_owner
 342                                 || (port_status & (PORT_OWNER | PORT_CONNECT))
 343                                         == 0)
 344                         try = 0;
 345                 else {
 346                         port_status ^= PORT_OWNER;
 347                         port_status &= ~(PORT_PE | PORT_RWC_BITS);
 348                         ehci_writel(ehci, port_status, status_reg);
 349                 }
 350                 spin_unlock_irq(&ehci->lock);
 351                 if (try > 1)
 352                         msleep(5);
 353         }
 354 }
 355
 356 /*
 357  * Dedicate or undedicate a port to the companion controller.
 358  * Syntax is "[-]portnum", where a leading '-' sign means
 359  * return control of the port to the EHCI controller.
 360  */
 361 static ssize_t store_companion(struct device *dev,
 362                                struct device_attribute *attr,
 363                                const char *buf, size_t count)
 364 {
 365         struct ehci_hcd         *ehci;
 366         int                     portnum, new_owner;
 367
 368         ehci = hcd_to_ehci(bus_to_hcd(dev_get_drvdata(dev)));
 369         new_owner = PORT_OWNER;         /* Owned by companion */
 370         if (sscanf(buf, "%d", &portnum) != 1)
 371                 return -EINVAL;
 372         if (portnum < 0) {
 373                 portnum = - portnum;
 374                 new_owner = 0;          /* Owned by EHCI */
 375         }
 376         if (portnum <= 0 || portnum > HCS_N_PORTS(ehci->hcs_params))
 377                 return -ENOENT;
 378         portnum--;
 379         if (new_owner)
 380                 set_bit(portnum, &ehci->companion_ports);
 381         else
 382                 clear_bit(portnum, &ehci->companion_ports);
 383         set_owner(ehci, portnum, new_owner);
 384         return count;
 385 }
 386 static DEVICE_ATTR(companion, 0644, show_companion, store_companion);
 387
 388 static inline void create_companion_file(struct ehci_hcd *ehci)
 389 {
 390         int     i;
 391
 392         /* with integrated TT there is no companion! */
 393         if (!ehci_is_TDI(ehci))
 394                 i = device_create_file(ehci_to_hcd(ehci)->self.dev,
 395                                        &dev_attr_companion);
 396 }
 397
 398 static inline void remove_companion_file(struct ehci_hcd *ehci)
 399 {
 400         /* with integrated TT there is no companion! */
 401         if (!ehci_is_TDI(ehci))
 402                 device_remove_file(ehci_to_hcd(ehci)->self.dev,
 403                                    &dev_attr_companion);
 404 }
 405
 406
 407 /*-------------------------------------------------------------------------*/
 408
 409 static int check_reset_complete (
 410         struct ehci_hcd *ehci,
 411         int             index,
 412         u32 __iomem     *status_reg,
 413         int             port_status
 414 ) {
 415         if (!(port_status & PORT_CONNECT))
 416                 return port_status;
 417
 418         /* if reset finished and it's still not enabled -- handoff */
 419         if (!(port_status & PORT_PE)) {
 420
 421                 /* with integrated TT, there's nobody to hand it to! */
 422                 if (ehci_is_TDI(ehci)) {
 423                         ehci_dbg (ehci,
 424                                 "Failed to enable port %d on root hub TT\n",
 425                                 index+1);
 426                         return port_status;
 427                 }
 428
 429                 ehci_dbg (ehci, "port %d full speed --> companion\n",
 430                         index + 1);
 431
 432                 // what happens if HCS_N_CC(params) == 0 ?
 433                 port_status |= PORT_OWNER;
 434                 port_status &= ~PORT_RWC_BITS;
 435                 ehci_writel(ehci, port_status, status_reg);
 436
 437         } else
 438                 ehci_dbg (ehci, "port %d high speed\n", index + 1);
 439
 440         return port_status;
 441 }
 442
 443 /*-------------------------------------------------------------------------*/
 444
 445
 446 /* build "status change" packet (one or two bytes) from HC registers */
 447
 448 static int
 449 ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
 450 {
 451         struct ehci_hcd *ehci = hcd_to_ehci (hcd);
 452         u32             temp, status = 0;
 453         u32             mask;
 454         int             ports, i, retval = 1;
 455         unsigned long   flags;
 456
 457         /* if !USB_SUSPEND, root hub timers won't get shut down ... */
 458         if (!HC_IS_RUNNING(hcd->state))
 459                 return 0;
 460
 461         /* init status to no-changes */
 462         buf [0] = 0;
 463         ports = HCS_N_PORTS (ehci->hcs_params);
 464         if (ports > 7) {
 465                 buf [1] = 0;
 466                 retval++;
 467         }
 468
 469         /* Some boards (mostly VIA?) report bogus overcurrent indications,
 470          * causing massive log spam unless we completely ignore them.  It
 471          * may be relevant that VIA VT8235 controllers, where PORT_POWER is
 472          * always set, seem to clear PORT_OCC and PORT_CSC when writing to
 473          * PORT_POWER; that's surprising, but maybe within-spec.
 474          */
 475         if (!ignore_oc)
 476                 mask = PORT_CSC | PORT_PEC | PORT_OCC;
 477         else
 478                 mask = PORT_CSC | PORT_PEC;
 479         // PORT_RESUME from hardware ~= PORT_STAT_C_SUSPEND
 480
 481         /* no hub change reports (bit 0) for now (power, ...) */
 482
 483         /* port N changes (bit N)? */
 484         spin_lock_irqsave (&ehci->lock, flags);
 485         for (i = 0; i < ports; i++) {
 486                 temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
 487
 488                 /*
 489                  * Return status information even for ports with OWNER set.
 490                  * Otherwise khubd wouldn't see the disconnect event when a
 491                  * high-speed device is switched over to the companion
 492                  * controller by the user.
 493                  */
 494
 495                 if ((temp & mask) != 0
 496                                 || ((temp & PORT_RESUME) != 0
 497                                         && time_after_eq(jiffies,
 498                                                 ehci->reset_done[i]))) {
 499                         if (i < 7)
 500                             buf [0] |= 1 << (i + 1);
 501                         else
 502                             buf [1] |= 1 << (i - 7);
 503                         status = STS_PCD;
 504                 }
 505         }
 506         /* FIXME autosuspend idle root hubs */
 507         spin_unlock_irqrestore (&ehci->lock, flags);
 508         return status ? retval : 0;
 509 }
 510
 511 /*-------------------------------------------------------------------------*/
 512
 513 static void
 514 ehci_hub_descriptor (
 515         struct ehci_hcd                 *ehci,
 516         struct usb_hub_descriptor       *desc
 517 ) {
 518         int             ports = HCS_N_PORTS (ehci->hcs_params);
 519         u16             temp;
 520
 521         desc->bDescriptorType = 0x29;
 522         desc->bPwrOn2PwrGood = 10;      /* ehci 1.0, 2.3.9 says 20ms max */
 523         desc->bHubContrCurrent = 0;
 524
 525         desc->bNbrPorts = ports;
 526         temp = 1 + (ports / 8);
 527         desc->bDescLength = 7 + 2 * temp;
 528
 529         /* two bitmaps:  ports removable, and usb 1.0 legacy PortPwrCtrlMask */
 530         memset (&desc->bitmap [0], 0, temp);
 531         memset (&desc->bitmap [temp], 0xff, temp);
 532
 533         temp = 0x0008;                  /* per-port overcurrent reporting */
 534         if (HCS_PPC (ehci->hcs_params))
 535                 temp |= 0x0001;         /* per-port power control */
 536         else
 537                 temp |= 0x0002;         /* no power switching */
 538 #if 0
 539 // re-enable when we support USB_PORT_FEAT_INDICATOR below.
 540         if (HCS_INDICATOR (ehci->hcs_params))
 541                 temp |= 0x0080;         /* per-port indicators (LEDs) */
 542 #endif
 543         desc->wHubCharacteristics = (__force __u16)cpu_to_le16 (temp);
 544 }
 545
 546 /*-------------------------------------------------------------------------*/
 547
 548 #define PORT_WAKE_BITS  (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
 549
 550 static int ehci_hub_control (
 551         struct usb_hcd  *hcd,
 552         u16             typeReq,
 553         u16             wValue,
 554         u16             wIndex,
 555         char            *buf,
 556         u16             wLength
 557 ) {
 558         struct ehci_hcd *ehci = hcd_to_ehci (hcd);
 559         int             ports = HCS_N_PORTS (ehci->hcs_params);
 560         u32 __iomem     *status_reg = &ehci->regs->port_status[
 561                                 (wIndex & 0xff) - 1];
 562         u32             temp, status;
 563         unsigned long   flags;
 564         int             retval = 0;
 565         unsigned        selector;
 566
 567         /*
 568          * FIXME:  support SetPortFeatures USB_PORT_FEAT_INDICATOR.
 569          * HCS_INDICATOR may say we can change LEDs to off/amber/green.
 570          * (track current state ourselves) ... blink for diagnostics,
 571          * power, "this is the one", etc.  EHCI spec supports this.
 572          */
 573
 574         spin_lock_irqsave (&ehci->lock, flags);
 575         switch (typeReq) {
 576         case ClearHubFeature:
 577                 switch (wValue) {
 578                 case C_HUB_LOCAL_POWER:
 579                 case C_HUB_OVER_CURRENT:
 580                         /* no hub-wide feature/status flags */
 581                         break;
 582                 default:
 583                         goto error;
 584                 }
 585                 break;
 586         case ClearPortFeature:
 587                 if (!wIndex || wIndex > ports)
 588                         goto error;
 589                 wIndex--;
 590                 temp = ehci_readl(ehci, status_reg);
 591
 592                 /*
 593                  * Even if OWNER is set, so the port is owned by the
 594                  * companion controller, khubd needs to be able to clear
 595                  * the port-change status bits (especially
 596                  * USB_PORT_FEAT_C_CONNECTION).
 597                  */
 598
 599                 switch (wValue) {
 600                 case USB_PORT_FEAT_ENABLE:
 601                         ehci_writel(ehci, temp & ~PORT_PE, status_reg);
 602                         break;
 603                 case USB_PORT_FEAT_C_ENABLE:
 604                         ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_PEC,
 605                                         status_reg);
 606                         break;
 607                 case USB_PORT_FEAT_SUSPEND:
 608                         if (temp & PORT_RESET)
 609                                 goto error;
 610                         if (ehci->no_selective_suspend)
 611                                 break;
 612                         if (temp & PORT_SUSPEND) {
 613                                 if ((temp & PORT_PE) == 0)
 614                                         goto error;
 615                                 /* resume signaling for 20 msec */
 616                                 temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
 617                                 ehci_writel(ehci, temp | PORT_RESUME,
 618                                                 status_reg);
 619                                 ehci->reset_done [wIndex] = jiffies
 620                                                 + msecs_to_jiffies (20);
 621                         }
 622                         break;
 623                 case USB_PORT_FEAT_C_SUSPEND:
 624                         /* we auto-clear this feature */
 625                         break;
 626                 case USB_PORT_FEAT_POWER:
 627                         if (HCS_PPC (ehci->hcs_params))
 628                                 ehci_writel(ehci,
 629                                           temp & ~(PORT_RWC_BITS | PORT_POWER),
 630                                           status_reg);
 631                         break;
 632                 case USB_PORT_FEAT_C_CONNECTION:
 633                         ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_CSC,
 634                                         status_reg);
 635                         break;
 636                 case USB_PORT_FEAT_C_OVER_CURRENT:
 637                         ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_OCC,
 638                                         status_reg);
 639                         break;
 640                 case USB_PORT_FEAT_C_RESET:
 641                         /* GetPortStatus clears reset */
 642                         break;
 643                 default:
 644                         goto error;
 645                 }
 646                 ehci_readl(ehci, &ehci->regs->command); /* unblock posted write */
 647                 break;
 648         case GetHubDescriptor:
 649                 ehci_hub_descriptor (ehci, (struct usb_hub_descriptor *)
 650                         buf);
 651                 break;
 652         case GetHubStatus:
 653                 /* no hub-wide feature/status flags */
 654                 memset (buf, 0, 4);
 655                 //cpu_to_le32s ((u32 *) buf);
 656                 break;
 657         case GetPortStatus:
 658                 if (!wIndex || wIndex > ports)
 659                         goto error;
 660                 wIndex--;
 661                 status = 0;
 662                 temp = ehci_readl(ehci, status_reg);
 663
 664                 // wPortChange bits
 665                 if (temp & PORT_CSC)
 666                         status |= 1 << USB_PORT_FEAT_C_CONNECTION;
 667                 if (temp & PORT_PEC)
 668                         status |= 1 << USB_PORT_FEAT_C_ENABLE;
 669
 670                 if ((temp & PORT_OCC) && !ignore_oc){
 671                         status |= 1 << USB_PORT_FEAT_C_OVER_CURRENT;
 672
 673                         /*
 674                          * Hubs should disable port power on over-current.
 675                          * However, not all EHCI implementations do this
 676                          * automatically, even if they _do_ support per-port
 677                          * power switching; they're allowed to just limit the
 678                          * current.  khubd will turn the power back on.
 679                          */
 680                         if (HCS_PPC (ehci->hcs_params)){
 681                                 ehci_writel(ehci,
 682                                         temp & ~(PORT_RWC_BITS | PORT_POWER),
 683                                         status_reg);
 684                         }
 685                 }
 686
 687                 /* whoever resumes must GetPortStatus to complete it!! */
 688                 if (temp & PORT_RESUME) {
 689
 690                         /* Remote Wakeup received? */
 691                         if (!ehci->reset_done[wIndex]) {
 692                                 /* resume signaling for 20 msec */
 693                                 ehci->reset_done[wIndex] = jiffies
 694                                                 + msecs_to_jiffies(20);
 695                                 /* check the port again */
 696                                 mod_timer(&ehci_to_hcd(ehci)->rh_timer,
 697                                                 ehci->reset_done[wIndex]);
 698                         }
 699
 700                         /* resume completed? */
 701                         else if (time_after_eq(jiffies,
 702                                         ehci->reset_done[wIndex])) {
 703                                 status |= 1 << USB_PORT_FEAT_C_SUSPEND;
 704                                 ehci->reset_done[wIndex] = 0;
 705
 706                                 /* stop resume signaling */
 707                                 temp = ehci_readl(ehci, status_reg);
 708                                 ehci_writel(ehci,
 709                                         temp & ~(PORT_RWC_BITS | PORT_RESUME),
 710                                         status_reg);
 711                                 retval = handshake(ehci, status_reg,
 712                                            PORT_RESUME, 0, 2000 /* 2msec */);
 713                                 if (retval != 0) {
 714                                         ehci_err(ehci,
 715                                                 "port %d resume error %d\n",
 716                                                 wIndex + 1, retval);
 717                                         goto error;
 718                                 }
 719                                 temp &= ~(PORT_SUSPEND|PORT_RESUME|(3<<10));
 720                         }
 721                 }
 722
 723                 /* whoever resets must GetPortStatus to complete it!! */
 724                 if ((temp & PORT_RESET)
 725                                 && time_after_eq(jiffies,
 726                                         ehci->reset_done[wIndex])) {
 727                         status |= 1 << USB_PORT_FEAT_C_RESET;
 728                         ehci->reset_done [wIndex] = 0;
 729
 730                         /* force reset to complete */
 731                         ehci_writel(ehci, temp & ~(PORT_RWC_BITS | PORT_RESET),
 732                                         status_reg);
 733                         /* REVISIT:  some hardware needs 550+ usec to clear
 734                          * this bit; seems too long to spin routinely...
 735                          */
 736                         retval = handshake(ehci, status_reg,
 737                                         PORT_RESET, 0, 750);
 738                         if (retval != 0) {
 739                                 ehci_err (ehci, "port %d reset error %d\n",
 740                                         wIndex + 1, retval);
 741                                 goto error;
 742                         }
 743
 744                         /* see what we found out */
 745                         temp = check_reset_complete (ehci, wIndex, status_reg,
 746                                         ehci_readl(ehci, status_reg));
 747                 }
 748
 749                 /* transfer dedicated ports to the companion hc */
 750                 if ((temp & PORT_CONNECT) &&
 751                                 test_bit(wIndex, &ehci->companion_ports)) {
 752                         temp &= ~PORT_RWC_BITS;
 753                         temp |= PORT_OWNER;
 754                         ehci_writel(ehci, temp, status_reg);
 755                         ehci_dbg(ehci, "port %d --> companion\n", wIndex + 1);
 756                         temp = ehci_readl(ehci, status_reg);
 757                 }
 758
 759                 /*
 760                  * Even if OWNER is set, there's no harm letting khubd
 761                  * see the wPortStatus values (they should all be 0 except
 762                  * for PORT_POWER anyway).
 763                  */
 764
 765                 if (temp & PORT_CONNECT) {
 766                         status |= 1 << USB_PORT_FEAT_CONNECTION;
 767                         // status may be from integrated TT
 768                         status |= ehci_port_speed(ehci, temp);
 769                 }
 770                 if (temp & PORT_PE)
 771                         status |= 1 << USB_PORT_FEAT_ENABLE;
 772                 if (temp & (PORT_SUSPEND|PORT_RESUME))
 773                         status |= 1 << USB_PORT_FEAT_SUSPEND;
 774                 if (temp & PORT_OC)
 775                         status |= 1 << USB_PORT_FEAT_OVER_CURRENT;
 776                 if (temp & PORT_RESET)
 777                         status |= 1 << USB_PORT_FEAT_RESET;
 778                 if (temp & PORT_POWER)
 779                         status |= 1 << USB_PORT_FEAT_POWER;
 780
 781 #ifndef EHCI_VERBOSE_DEBUG
 782         if (status & ~0xffff)   /* only if wPortChange is interesting */
 783 #endif
 784                 dbg_port (ehci, "GetStatus", wIndex + 1, temp);
 785                 put_unaligned(cpu_to_le32 (status), (__le32 *) buf);
 786                 break;
 787         case SetHubFeature:
 788                 switch (wValue) {
 789                 case C_HUB_LOCAL_POWER:
 790                 case C_HUB_OVER_CURRENT:
 791                         /* no hub-wide feature/status flags */
 792                         break;
 793                 default:
 794                         goto error;
 795                 }
 796                 break;
 797         case SetPortFeature:
 798                 selector = wIndex >> 8;
 799                 wIndex &= 0xff;
 800                 if (!wIndex || wIndex > ports)
 801                         goto error;
 802                 wIndex--;
 803                 temp = ehci_readl(ehci, status_reg);
 804                 if (temp & PORT_OWNER)
 805                         break;
 806
 807                 temp &= ~PORT_RWC_BITS;
 808                 switch (wValue) {
 809                 case USB_PORT_FEAT_SUSPEND:
 810                         if (ehci->no_selective_suspend)
 811                                 break;
 812                         if ((temp & PORT_PE) == 0
 813                                         || (temp & PORT_RESET) != 0)
 814                                 goto error;
 815                         if (device_may_wakeup(&hcd->self.root_hub->dev))
 816                                 temp |= PORT_WAKE_BITS;
 817                         ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
 818                         break;
 819                 case USB_PORT_FEAT_POWER:
 820                         if (HCS_PPC (ehci->hcs_params))
 821                                 ehci_writel(ehci, temp | PORT_POWER,
 822                                                 status_reg);
 823                         break;
 824                 case USB_PORT_FEAT_RESET:
 825                         if (temp & PORT_RESUME)
 826                                 goto error;
 827                         /* line status bits may report this as low speed,
 828                          * which can be fine if this root hub has a
 829                          * transaction translator built in.
 830                          */
 831                         if ((temp & (PORT_PE|PORT_CONNECT)) == PORT_CONNECT
 832                                         && !ehci_is_TDI(ehci)
 833                                         && PORT_USB11 (temp)) {
 834                                 ehci_dbg (ehci,
 835                                         "port %d low speed --> companion\n",
 836                                         wIndex + 1);
 837                                 temp |= PORT_OWNER;
 838                         } else {
 839                                 ehci_vdbg (ehci, "port %d reset\n", wIndex + 1);
 840                                 temp |= PORT_RESET;
 841                                 temp &= ~PORT_PE;
 842
 843                                 /*
 844                                  * caller must wait, then call GetPortStatus
 845                                  * usb 2.0 spec says 50 ms resets on root
 846                                  */
 847                                 ehci->reset_done [wIndex] = jiffies
 848                                                 + msecs_to_jiffies (50);
 849                         }
 850                         ehci_writel(ehci, temp, status_reg);
 851                         break;
 852
 853                 /* For downstream facing ports (these):  one hub port is put
 854                  * into test mode according to USB2 11.24.2.13, then the hub
 855                  * must be reset (which for root hub now means rmmod+modprobe,
 856                  * or else system reboot).  See EHCI 2.3.9 and 4.14 for info
 857                  * about the EHCI-specific stuff.
 858                  */
 859                 case USB_PORT_FEAT_TEST:
 860                         if (!selector || selector > 5)
 861                                 goto error;
 862                         ehci_quiesce(ehci);
 863                         ehci_halt(ehci);
 864                         temp |= selector << 16;
 865                         ehci_writel(ehci, temp, status_reg);
 866                         break;
 867
 868                 default:
 869                         goto error;
 870                 }
 871                 ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
 872                 break;
 873
 874         default:
 875 error:
 876                 /* "stall" on error */
 877                 retval = -EPIPE;
 878         }
 879         spin_unlock_irqrestore (&ehci->lock, flags);
 880         return retval;
 881 }
 882
 883 static void ehci_relinquish_port(struct usb_hcd *hcd, int portnum)
 884 {
 885         struct ehci_hcd         *ehci = hcd_to_ehci(hcd);
 886
 887         if (ehci_is_TDI(ehci))
 888                 return;
 889         set_owner(ehci, --portnum, PORT_OWNER);
 890 }
 891