2 * Copyright (C) 1995 Linus Torvalds
3 * Adapted from 'alpha' version by Gary Thomas
4 * Modified by Cort Dougan (cort@cs.nmt.edu)
5 * Modified for MBX using prep/chrp/pmac functions by Dan (dmalek@jlc.net)
6 * Further modified for generic 8xx by Dan.
10 * bootup setup stuff..
13 #include <linux/kernel.h>
14 #include <linux/slab.h>
15 #include <linux/interrupt.h>
16 #include <linux/init.h>
17 #include <linux/time.h>
18 #include <linux/rtc.h>
19 #include <linux/fsl_devices.h>
22 #include <asm/mpc8xx.h>
23 #include <asm/8xx_immap.h>
25 #include <asm/fs_pd.h>
26 #include <mm/mmu_decl.h>
28 #include <sysdev/mpc8xx_pic.h>
32 struct mpc8xx_pcmcia_ops m8xx_pcmcia_ops;
34 extern int cpm_pic_init(void);
35 extern int cpm_get_irq(void);
37 /* A place holder for time base interrupts, if they are ever enabled. */
38 static irqreturn_t timebase_interrupt(int irq, void *dev)
40 printk ("timebase_interrupt()\n");
45 static struct irqaction tbint_irqaction = {
46 .handler = timebase_interrupt,
47 .mask = CPU_MASK_NONE,
51 /* per-board overridable init_internal_rtc() function. */
52 void __init __attribute__ ((weak))
53 init_internal_rtc(void)
55 sit8xx_t __iomem *sys_tmr = immr_map(im_sit);
57 /* Disable the RTC one second and alarm interrupts. */
58 clrbits16(&sys_tmr->sit_rtcsc, (RTCSC_SIE | RTCSC_ALE));
61 setbits16(&sys_tmr->sit_rtcsc, (RTCSC_RTF | RTCSC_RTE));
65 static int __init get_freq(char *name, unsigned long *val)
67 struct device_node *cpu;
68 const unsigned int *fp;
71 /* The cpu node should have timebase and clock frequency properties */
72 cpu = of_find_node_by_type(NULL, "cpu");
75 fp = of_get_property(cpu, name, NULL);
87 /* The decrementer counts at the system (internal) clock frequency divided by
88 * sixteen, or external oscillator divided by four. We force the processor
89 * to use system clock divided by sixteen.
91 void __init mpc8xx_calibrate_decr(void)
93 struct device_node *cpu;
94 cark8xx_t __iomem *clk_r1;
95 car8xx_t __iomem *clk_r2;
96 sitk8xx_t __iomem *sys_tmr1;
97 sit8xx_t __iomem *sys_tmr2;
100 clk_r1 = immr_map(im_clkrstk);
102 /* Unlock the SCCR. */
103 out_be32(&clk_r1->cark_sccrk, ~KAPWR_KEY);
104 out_be32(&clk_r1->cark_sccrk, KAPWR_KEY);
107 /* Force all 8xx processors to use divide by 16 processor clock. */
108 clk_r2 = immr_map(im_clkrst);
109 setbits32(&clk_r2->car_sccr, 0x02000000);
112 /* Processor frequency is MHz.
114 ppc_tb_freq = 50000000;
115 if (!get_freq("bus-frequency", &ppc_tb_freq)) {
116 printk(KERN_ERR "WARNING: Estimating decrementer frequency "
120 ppc_proc_freq = 50000000;
121 if (!get_freq("clock-frequency", &ppc_proc_freq))
122 printk(KERN_ERR "WARNING: Estimating processor frequency "
125 printk("Decrementer Frequency = 0x%lx\n", ppc_tb_freq);
127 /* Perform some more timer/timebase initialization. This used
128 * to be done elsewhere, but other changes caused it to get
129 * called more than once....that is a bad thing.
131 * First, unlock all of the registers we are going to modify.
132 * To protect them from corruption during power down, registers
133 * that are maintained by keep alive power are "locked". To
134 * modify these registers we have to write the key value to
135 * the key location associated with the register.
136 * Some boards power up with these unlocked, while others
137 * are locked. Writing anything (including the unlock code?)
138 * to the unlocked registers will lock them again. So, here
139 * we guarantee the registers are locked, then we unlock them
142 sys_tmr1 = immr_map(im_sitk);
143 out_be32(&sys_tmr1->sitk_tbscrk, ~KAPWR_KEY);
144 out_be32(&sys_tmr1->sitk_rtcsck, ~KAPWR_KEY);
145 out_be32(&sys_tmr1->sitk_tbk, ~KAPWR_KEY);
146 out_be32(&sys_tmr1->sitk_tbscrk, KAPWR_KEY);
147 out_be32(&sys_tmr1->sitk_rtcsck, KAPWR_KEY);
148 out_be32(&sys_tmr1->sitk_tbk, KAPWR_KEY);
149 immr_unmap(sys_tmr1);
153 /* Enabling the decrementer also enables the timebase interrupts
154 * (or from the other point of view, to get decrementer interrupts
155 * we have to enable the timebase). The decrementer interrupt
156 * is wired into the vector table, nothing to do here for that.
158 cpu = of_find_node_by_type(NULL, "cpu");
159 virq= irq_of_parse_and_map(cpu, 0);
160 irq = irq_map[virq].hwirq;
162 sys_tmr2 = immr_map(im_sit);
163 out_be16(&sys_tmr2->sit_tbscr, ((1 << (7 - (irq/2))) << 8) |
164 (TBSCR_TBF | TBSCR_TBE));
165 immr_unmap(sys_tmr2);
167 if (setup_irq(virq, &tbint_irqaction))
168 panic("Could not allocate timer IRQ!");
171 /* The RTC on the MPC8xx is an internal register.
172 * We want to protect this during power down, so we need to unlock,
173 * modify, and re-lock.
176 int mpc8xx_set_rtc_time(struct rtc_time *tm)
178 sitk8xx_t __iomem *sys_tmr1;
179 sit8xx_t __iomem *sys_tmr2;
182 sys_tmr1 = immr_map(im_sitk);
183 sys_tmr2 = immr_map(im_sit);
184 time = mktime(tm->tm_year+1900, tm->tm_mon+1, tm->tm_mday,
185 tm->tm_hour, tm->tm_min, tm->tm_sec);
187 out_be32(&sys_tmr1->sitk_rtck, KAPWR_KEY);
188 out_be32(&sys_tmr2->sit_rtc, time);
189 out_be32(&sys_tmr1->sitk_rtck, ~KAPWR_KEY);
191 immr_unmap(sys_tmr2);
192 immr_unmap(sys_tmr1);
196 void mpc8xx_get_rtc_time(struct rtc_time *tm)
199 sit8xx_t __iomem *sys_tmr = immr_map(im_sit);
201 /* Get time from the RTC. */
202 data = in_be32(&sys_tmr->sit_rtc);
210 void mpc8xx_restart(char *cmd)
212 car8xx_t __iomem *clk_r = immr_map(im_clkrst);
217 setbits32(&clk_r->car_plprcr, 0x00000080);
218 /* Clear the ME bit in MSR to cause checkstop on machine check
220 mtmsr(mfmsr() & ~0x1000);
222 in_8(&clk_r->res[0]);
223 panic("Restart failed\n");
226 static void cpm_cascade(unsigned int irq, struct irq_desc *desc)
230 if ((cascade_irq = cpm_get_irq()) >= 0) {
231 struct irq_desc *cdesc = irq_desc + cascade_irq;
233 generic_handle_irq(cascade_irq);
234 cdesc->chip->eoi(cascade_irq);
236 desc->chip->eoi(irq);
239 /* Initialize the internal interrupt controllers. The number of
240 * interrupts supported can vary with the processor type, and the
241 * 82xx family can have up to 64.
242 * External interrupts can be either edge or level triggered, and
243 * need to be initialized by the appropriate driver.
245 void __init mpc8xx_pics_init(void)
249 if (mpc8xx_pic_init()) {
250 printk(KERN_ERR "Failed interrupt 8xx controller initialization\n");
254 irq = cpm_pic_init();
256 set_irq_chained_handler(irq, cpm_cascade);