[SCSI] libiscsi: export iscsi_itt_to_task for bnx2i
[linux-2.6] / firmware / Makefile
1 #
2 # kbuild file for firmware/
3 #
4
5 # Create $(fwabs) from $(CONFIG_EXTRA_FIRMWARE_DIR) -- if it doesn't have a
6 # leading /, it's relative to $(srctree).
7 fwdir := $(subst ",,$(CONFIG_EXTRA_FIRMWARE_DIR))
8 fwabs := $(addprefix $(srctree)/,$(filter-out /%,$(fwdir)))$(filter /%,$(fwdir))
9
10 fw-external-y := $(subst ",,$(CONFIG_EXTRA_FIRMWARE))
11
12 # There are three cases to care about:
13 # 1. Building kernel with CONFIG_FIRMWARE_IN_KERNEL=y -- $(fw-shipped-y) should
14 #    include the firmware files to include, according to .config
15 # 2. 'make modules_install', which will install firmware for modules, and 
16 #    _also_ for the in-kernel drivers when CONFIG_FIRMWARE_IN_KERNEL=n
17 # 3. 'make firmware_install', which installs all firmware, unconditionally.
18
19 # For the former two cases we want $(fw-shipped-y) and $(fw-shipped-m) to be
20 # accurate. In the latter case it doesn't matter -- it'll use $(fw-shipped-all).
21 # But be aware that the config file might not be included at all.
22
23 ifdef CONFIG_ACENIC_OMIT_TIGON_I
24 acenic-objs := acenic/tg2.bin
25 fw-shipped- += acenic/tg1.bin
26 else
27 acenic-objs := acenic/tg1.bin acenic/tg2.bin
28 endif
29 fw-shipped-$(CONFIG_3C359) += 3com/3C359.bin
30 fw-shipped-$(CONFIG_ACENIC) += $(acenic-objs)
31 fw-shipped-$(CONFIG_ADAPTEC_STARFIRE) += adaptec/starfire_rx.bin \
32                                          adaptec/starfire_tx.bin
33 fw-shipped-$(CONFIG_ATARI_DSP56K) += dsp56k/bootstrap.bin
34 fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw
35 fw-shipped-$(CONFIG_BNX2) += bnx2/bnx2-mips-09-4.6.17.fw \
36                              bnx2/bnx2-rv2p-09-4.6.15.fw \
37                              bnx2/bnx2-mips-06-4.6.16.fw \
38                              bnx2/bnx2-rv2p-06-4.6.16.fw
39 fw-shipped-$(CONFIG_CASSINI) += sun/cassini.bin
40 fw-shipped-$(CONFIG_COMPUTONE) += intelliport2.bin
41 fw-shipped-$(CONFIG_CHELSIO_T3) += cxgb3/t3b_psram-1.1.0.bin \
42                                    cxgb3/t3c_psram-1.1.0.bin \
43                                    cxgb3/t3fw-7.1.0.bin
44 fw-shipped-$(CONFIG_DVB_AV7110) += av7110/bootcode.bin
45 fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += ttusb-budget/dspbootcode.bin
46 fw-shipped-$(CONFIG_E100) += e100/d101m_ucode.bin e100/d101s_ucode.bin \
47                              e100/d102e_ucode.bin
48 fw-shipped-$(CONFIG_MYRI_SBUS) += myricom/lanai.bin
49 fw-shipped-$(CONFIG_PCMCIA_PCNET) += cis/LA-PCM.cis
50 fw-shipped-$(CONFIG_PCMCIA_SMC91C92) += ositech/Xilinx7OD.bin
51 fw-shipped-$(CONFIG_SCSI_ADVANSYS) += advansys/mcode.bin advansys/38C1600.bin \
52                                       advansys/3550.bin advansys/38C0800.bin
53 fw-shipped-$(CONFIG_SCSI_QLOGIC_1280) += qlogic/1040.bin qlogic/1280.bin \
54                                          qlogic/12160.bin
55 fw-shipped-$(CONFIG_SCSI_QLOGICPTI) += qlogic/isp1000.bin
56 fw-shipped-$(CONFIG_SMCTR) += tr_smctr.bin
57 fw-shipped-$(CONFIG_SND_KORG1212) += korg/k1212.dsp
58 fw-shipped-$(CONFIG_SND_MAESTRO3) += ess/maestro3_assp_kernel.fw \
59                                      ess/maestro3_assp_minisrc.fw
60 fw-shipped-$(CONFIG_SND_SB16_CSP) += sb16/mulaw_main.csp sb16/alaw_main.csp \
61                                      sb16/ima_adpcm_init.csp \
62                                      sb16/ima_adpcm_playback.csp \
63                                      sb16/ima_adpcm_capture.csp
64 fw-shipped-$(CONFIG_SND_YMFPCI) += yamaha/ds1_ctrl.fw yamaha/ds1_dsp.fw \
65                                    yamaha/ds1e_ctrl.fw
66 fw-shipped-$(CONFIG_SND_WAVEFRONT) += yamaha/yss225_registers.bin
67 fw-shipped-$(CONFIG_TEHUTI) += tehuti/bdx.bin
68 fw-shipped-$(CONFIG_TIGON3) += tigon/tg3.bin tigon/tg3_tso.bin \
69                                tigon/tg3_tso5.bin
70 fw-shipped-$(CONFIG_TYPHOON) += 3com/typhoon.bin
71 fw-shipped-$(CONFIG_USB_DABUSB) += dabusb/firmware.fw dabusb/bitstream.bin
72 fw-shipped-$(CONFIG_USB_EMI26) += emi26/loader.fw emi26/firmware.fw \
73                                   emi26/bitstream.fw
74 fw-shipped-$(CONFIG_USB_EMI62) += emi62/loader.fw emi62/bitstream.fw \
75                                   emi62/spdif.fw emi62/midi.fw
76 fw-shipped-$(CONFIG_USB_KAWETH) += kaweth/new_code.bin kaweth/trigger_code.bin \
77                                    kaweth/new_code_fix.bin \
78                                    kaweth/trigger_code_fix.bin
79 ifdef CONFIG_FIRMWARE_IN_KERNEL
80 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_MPR) += keyspan/mpr.fw
81 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA18X) += keyspan/usa18x.fw
82 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19) += keyspan/usa19.fw
83 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19QI) += keyspan/usa19qi.fw
84 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19QW) += keyspan/usa19qw.fw
85 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19W) += keyspan/usa19w.fw
86 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28) += keyspan/usa28.fw
87 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28XA) += keyspan/usa28xa.fw
88 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28XB) += keyspan/usa28xb.fw
89 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28X) += keyspan/usa28x.fw
90 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49W) += keyspan/usa49w.fw
91 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49WLC) += keyspan/usa49wlc.fw
92 else
93 fw-shipped- += keyspan/mpr.fw keyspan/usa18x.fw keyspan/usa19.fw        \
94         keyspan/usa19qi.fw keyspan/usa19qw.fw keyspan/usa19w.fw         \
95         keyspan/usa28.fw keyspan/usa28xa.fw keyspan/usa28xb.fw          \
96         keyspan/usa28x.fw keyspan/usa49w.fw keyspan/usa49wlc.fw
97 endif
98 fw-shipped-$(CONFIG_USB_SERIAL_TI) += ti_3410.fw ti_5052.fw \
99                                       mts_cdma.fw mts_gsm.fw mts_edge.fw
100 fw-shipped-$(CONFIG_USB_SERIAL_EDGEPORT) += edgeport/boot.fw edgeport/boot2.fw \
101                                             edgeport/down.fw edgeport/down2.fw
102 fw-shipped-$(CONFIG_USB_SERIAL_EDGEPORT_TI) += edgeport/down3.bin
103 fw-shipped-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat_loader.fw whiteheat.fw \
104                                            # whiteheat_loader_debug.fw
105 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda/keyspan_pda.fw
106 fw-shipped-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda/xircom_pgs.fw
107 fw-shipped-$(CONFIG_USB_VICAM) += vicam/firmware.fw
108 fw-shipped-$(CONFIG_VIDEO_CPIA2) += cpia2/stv0672_vp4.bin
109 fw-shipped-$(CONFIG_YAM) += yam/1200.bin yam/9600.bin
110
111 fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-)
112
113 # Directories which we _might_ need to create, so we have a rule for them.
114 firmware-dirs := $(sort $(patsubst %,$(objtree)/$(obj)/%/,$(dir $(fw-external-y) $(fw-shipped-all))))
115
116 quiet_cmd_mkdir = MKDIR   $(patsubst $(objtree)/%,%,$@)
117       cmd_mkdir = mkdir -p $@
118
119 quiet_cmd_ihex  = IHEX    $@
120       cmd_ihex  = $(OBJCOPY) -Iihex -Obinary $< $@
121
122 quiet_cmd_ihex2fw  = IHEX2FW $@
123       cmd_ihex2fw  = $(objtree)/$(obj)/ihex2fw $< $@
124
125 quiet_cmd_h16tofw  = H16TOFW $@
126       cmd_h16tofw  = $(objtree)/$(obj)/ihex2fw -w $< $@
127
128 quiet_cmd_fwbin = MK_FW   $@
129       cmd_fwbin = FWNAME="$(patsubst firmware/%.gen.S,%,$@)";                \
130                   FWSTR="$(subst /,_,$(subst .,_,$(subst -,_,$(patsubst      \
131                                 firmware/%.gen.S,%,$@))))";                  \
132                   ASM_WORD=$(if $(CONFIG_64BIT),.quad,.long);                \
133                   ASM_ALIGN=$(if $(CONFIG_64BIT),3,2);                       \
134                   PROGBITS=$(if $(CONFIG_ARM),%,@)progbits;                  \
135                   echo "/* Generated by firmware/Makefile */"           > $@;\
136                   echo "    .section .rodata"                           >>$@;\
137                   echo "    .p2align $${ASM_ALIGN}"                     >>$@;\
138                   echo "_fw_$${FWSTR}_bin:"                             >>$@;\
139                   echo "    .incbin \"$(2)\""                           >>$@;\
140                   echo "_fw_end:"                                       >>$@;\
141                   echo "   .section .rodata.str,\"aMS\",$${PROGBITS},1" >>$@;\
142                   echo "    .p2align $${ASM_ALIGN}"                     >>$@;\
143                   echo "_fw_$${FWSTR}_name:"                            >>$@;\
144                   echo "    .string \"$$FWNAME\""                       >>$@;\
145                   echo "    .section .builtin_fw,\"a\",$${PROGBITS}"    >>$@;\
146                   echo "    .p2align $${ASM_ALIGN}"                     >>$@;\
147                   echo "    $${ASM_WORD} _fw_$${FWSTR}_name"            >>$@;\
148                   echo "    $${ASM_WORD} _fw_$${FWSTR}_bin"             >>$@;\
149                   echo "    $${ASM_WORD} _fw_end - _fw_$${FWSTR}_bin"   >>$@;
150
151 # One of these files will change, or come into existence, whenever
152 # the configuration changes between 32-bit and 64-bit. The .S files
153 # need to change when that happens.
154 wordsize_deps := $(wildcard include/config/64bit.h include/config/32bit.h \
155                 include/config/ppc32.h include/config/ppc64.h \
156                 include/config/superh32.h include/config/superh64.h \
157                 include/config/x86_32.h include/config/x86_64.h)
158
159 # Workaround for make < 3.81, where .SECONDEXPANSION doesn't work.
160 # It'll end up depending on these targets, so make them a PHONY rule which
161 # depends on _all_ the directories in $(firmware-dirs), and it'll work out OK.
162 PHONY += $(objtree)/$$(%) $(objtree)/$(obj)/$$(%)
163 $(objtree)/$$(%) $(objtree)/$(obj)/$$(%): $(firmware-dirs)
164         @true
165
166 # For the $$(dir %) trick, where we need % to be expanded first.
167 .SECONDEXPANSION:
168
169 $(patsubst %,$(obj)/%.gen.S, $(fw-shipped-y)): %: $(wordsize_deps) \
170                 | $(objtree)/$$(dir %)
171         $(call cmd,fwbin,$(patsubst %.gen.S,%,$@))
172 $(patsubst %,$(obj)/%.gen.S, $(fw-external-y)): %: $(wordsize_deps) \
173                 include/config/extra/firmware/dir.h | $(objtree)/$$(dir %)
174         $(call cmd,fwbin,$(fwabs)/$(patsubst $(obj)/%.gen.S,%,$@))
175
176 # The .o files depend on the binaries directly; the .S files don't.
177 $(patsubst %,$(obj)/%.gen.o, $(fw-shipped-y)): %.gen.o: %
178 $(patsubst %,$(obj)/%.gen.o, $(fw-external-y)): $(obj)/%.gen.o: $(fwdir)/%
179
180 # .ihex is used just as a simple way to hold binary files in a source tree
181 # where binaries are frowned upon. They are directly converted with objcopy.
182 $(obj)/%: $(obj)/%.ihex | $(objtree)/$(obj)/$$(dir %)
183         $(call cmd,ihex)
184
185 # Don't depend on ihex2fw if we're installing and it already exists.
186 # Putting it after | in the dependencies doesn't seem sufficient when
187 # we're installing after a cross-compile, because ihex2fw has dependencies
188 # on stuff like /usr/lib/gcc/ppc64-redhat-linux/4.3.0/include/stddef.h and 
189 # thus wants to be rebuilt. Which it can't be, if the prebuilt kernel tree
190 # is exported read-only for someone to run 'make install'.
191 ifeq ($(INSTALL):$(wildcard $(obj)/ihex2fw),install:$(obj)/ihex2fw)
192 ihex2fw_dep :=
193 else
194 ihex2fw_dep := $(obj)/ihex2fw
195 endif
196
197 # .HEX is also Intel HEX, but where the offset and length in each record
198 # is actually meaningful, because the firmware has to be loaded in a certain
199 # order rather than as a single binary blob. Thus, we convert them into our
200 # more compact binary representation of ihex records (<linux/ihex.h>)
201 $(obj)/%.fw: $(obj)/%.HEX $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
202         $(call cmd,ihex2fw)
203
204 # .H16 is our own modified form of Intel HEX, with 16-bit length for records.
205 $(obj)/%.fw: $(obj)/%.H16 $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
206         $(call cmd,h16tofw)
207
208 $(firmware-dirs):
209         $(call cmd,mkdir)
210
211 obj-y                            += $(patsubst %,%.gen.o, $(fw-external-y))
212 obj-$(CONFIG_FIRMWARE_IN_KERNEL) += $(patsubst %,%.gen.o, $(fw-shipped-y))
213
214 # Remove .S files and binaries created from ihex
215 # (during 'make clean' .config isn't included so they're all in $(fw-shipped-))
216 targets := $(fw-shipped-) $(patsubst $(obj)/%,%, \
217                                 $(shell find $(obj) -name \*.gen.S 2>/dev/null))
218
219 # Without this, built-in.o won't be created when it's empty, and the
220 # final vmlinux link will fail.
221 obj-n := dummy
222
223 hostprogs-y := ihex2fw