rtc: add support for ST M41T94 SPI RTC
[linux-2.6] / drivers / rtc / rtc-rs5c372.c
1 /*
2  * An I2C driver for Ricoh RS5C372 and RV5C38[67] RTCs
3  *
4  * Copyright (C) 2005 Pavel Mironchik <pmironchik@optifacio.net>
5  * Copyright (C) 2006 Tower Technologies
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License version 2 as
9  * published by the Free Software Foundation.
10  */
11
12 #include <linux/i2c.h>
13 #include <linux/rtc.h>
14 #include <linux/bcd.h>
15
16 #define DRV_VERSION "0.5"
17
18
19 /*
20  * Ricoh has a family of I2C based RTCs, which differ only slightly from
21  * each other.  Differences center on pinout (e.g. how many interrupts,
22  * output clock, etc) and how the control registers are used.  The '372
23  * is significant only because that's the one this driver first supported.
24  */
25 #define RS5C372_REG_SECS        0
26 #define RS5C372_REG_MINS        1
27 #define RS5C372_REG_HOURS       2
28 #define RS5C372_REG_WDAY        3
29 #define RS5C372_REG_DAY         4
30 #define RS5C372_REG_MONTH       5
31 #define RS5C372_REG_YEAR        6
32 #define RS5C372_REG_TRIM        7
33 #       define RS5C372_TRIM_XSL         0x80
34 #       define RS5C372_TRIM_MASK        0x7F
35
36 #define RS5C_REG_ALARM_A_MIN    8                       /* or ALARM_W */
37 #define RS5C_REG_ALARM_A_HOURS  9
38 #define RS5C_REG_ALARM_A_WDAY   10
39
40 #define RS5C_REG_ALARM_B_MIN    11                      /* or ALARM_D */
41 #define RS5C_REG_ALARM_B_HOURS  12
42 #define RS5C_REG_ALARM_B_WDAY   13                      /* (ALARM_B only) */
43
44 #define RS5C_REG_CTRL1          14
45 #       define RS5C_CTRL1_AALE          (1 << 7)        /* or WALE */
46 #       define RS5C_CTRL1_BALE          (1 << 6)        /* or DALE */
47 #       define RV5C387_CTRL1_24         (1 << 5)
48 #       define RS5C372A_CTRL1_SL1       (1 << 5)
49 #       define RS5C_CTRL1_CT_MASK       (7 << 0)
50 #       define RS5C_CTRL1_CT0           (0 << 0)        /* no periodic irq */
51 #       define RS5C_CTRL1_CT4           (4 << 0)        /* 1 Hz level irq */
52 #define RS5C_REG_CTRL2          15
53 #       define RS5C372_CTRL2_24         (1 << 5)
54 #       define RS5C_CTRL2_XSTP          (1 << 4)
55 #       define RS5C_CTRL2_CTFG          (1 << 2)
56 #       define RS5C_CTRL2_AAFG          (1 << 1)        /* or WAFG */
57 #       define RS5C_CTRL2_BAFG          (1 << 0)        /* or DAFG */
58
59
60 /* to read (style 1) or write registers starting at R */
61 #define RS5C_ADDR(R)            (((R) << 4) | 0)
62
63
64 enum rtc_type {
65         rtc_undef = 0,
66         rtc_rs5c372a,
67         rtc_rs5c372b,
68         rtc_rv5c386,
69         rtc_rv5c387a,
70 };
71
72 static const struct i2c_device_id rs5c372_id[] = {
73         { "rs5c372a", rtc_rs5c372a },
74         { "rs5c372b", rtc_rs5c372b },
75         { "rv5c386", rtc_rv5c386 },
76         { "rv5c387a", rtc_rv5c387a },
77         { }
78 };
79 MODULE_DEVICE_TABLE(i2c, rs5c372_id);
80
81 /* REVISIT:  this assumes that:
82  *  - we're in the 21st century, so it's safe to ignore the century
83  *    bit for rv5c38[67] (REG_MONTH bit 7);
84  *  - we should use ALARM_A not ALARM_B (may be wrong on some boards)
85  */
86 struct rs5c372 {
87         struct i2c_client       *client;
88         struct rtc_device       *rtc;
89         enum rtc_type           type;
90         unsigned                time24:1;
91         unsigned                has_irq:1;
92         char                    buf[17];
93         char                    *regs;
94 };
95
96 static int rs5c_get_regs(struct rs5c372 *rs5c)
97 {
98         struct i2c_client       *client = rs5c->client;
99         struct i2c_msg          msgs[] = {
100                 { client->addr, I2C_M_RD, sizeof rs5c->buf, rs5c->buf },
101         };
102
103         /* This implements the third reading method from the datasheet, using
104          * an internal address that's reset after each transaction (by STOP)
105          * to 0x0f ... so we read extra registers, and skip the first one.
106          *
107          * The first method doesn't work with the iop3xx adapter driver, on at
108          * least 80219 chips; this works around that bug.
109          */
110         if ((i2c_transfer(client->adapter, msgs, 1)) != 1) {
111                 dev_warn(&client->dev, "can't read registers\n");
112                 return -EIO;
113         }
114
115         dev_dbg(&client->dev,
116                 "%02x %02x %02x (%02x) %02x %02x %02x (%02x), "
117                 "%02x %02x %02x, %02x %02x %02x; %02x %02x\n",
118                 rs5c->regs[0],  rs5c->regs[1],  rs5c->regs[2],  rs5c->regs[3],
119                 rs5c->regs[4],  rs5c->regs[5],  rs5c->regs[6],  rs5c->regs[7],
120                 rs5c->regs[8],  rs5c->regs[9],  rs5c->regs[10], rs5c->regs[11],
121                 rs5c->regs[12], rs5c->regs[13], rs5c->regs[14], rs5c->regs[15]);
122
123         return 0;
124 }
125
126 static unsigned rs5c_reg2hr(struct rs5c372 *rs5c, unsigned reg)
127 {
128         unsigned        hour;
129
130         if (rs5c->time24)
131                 return BCD2BIN(reg & 0x3f);
132
133         hour = BCD2BIN(reg & 0x1f);
134         if (hour == 12)
135                 hour = 0;
136         if (reg & 0x20)
137                 hour += 12;
138         return hour;
139 }
140
141 static unsigned rs5c_hr2reg(struct rs5c372 *rs5c, unsigned hour)
142 {
143         if (rs5c->time24)
144                 return BIN2BCD(hour);
145
146         if (hour > 12)
147                 return 0x20 | BIN2BCD(hour - 12);
148         if (hour == 12)
149                 return 0x20 | BIN2BCD(12);
150         if (hour == 0)
151                 return BIN2BCD(12);
152         return BIN2BCD(hour);
153 }
154
155 static int rs5c372_get_datetime(struct i2c_client *client, struct rtc_time *tm)
156 {
157         struct rs5c372  *rs5c = i2c_get_clientdata(client);
158         int             status = rs5c_get_regs(rs5c);
159
160         if (status < 0)
161                 return status;
162
163         tm->tm_sec = BCD2BIN(rs5c->regs[RS5C372_REG_SECS] & 0x7f);
164         tm->tm_min = BCD2BIN(rs5c->regs[RS5C372_REG_MINS] & 0x7f);
165         tm->tm_hour = rs5c_reg2hr(rs5c, rs5c->regs[RS5C372_REG_HOURS]);
166
167         tm->tm_wday = BCD2BIN(rs5c->regs[RS5C372_REG_WDAY] & 0x07);
168         tm->tm_mday = BCD2BIN(rs5c->regs[RS5C372_REG_DAY] & 0x3f);
169
170         /* tm->tm_mon is zero-based */
171         tm->tm_mon = BCD2BIN(rs5c->regs[RS5C372_REG_MONTH] & 0x1f) - 1;
172
173         /* year is 1900 + tm->tm_year */
174         tm->tm_year = BCD2BIN(rs5c->regs[RS5C372_REG_YEAR]) + 100;
175
176         dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
177                 "mday=%d, mon=%d, year=%d, wday=%d\n",
178                 __func__,
179                 tm->tm_sec, tm->tm_min, tm->tm_hour,
180                 tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
181
182         /* rtc might need initialization */
183         return rtc_valid_tm(tm);
184 }
185
186 static int rs5c372_set_datetime(struct i2c_client *client, struct rtc_time *tm)
187 {
188         struct rs5c372  *rs5c = i2c_get_clientdata(client);
189         unsigned char   buf[8];
190
191         dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d "
192                 "mday=%d, mon=%d, year=%d, wday=%d\n",
193                 __func__,
194                 tm->tm_sec, tm->tm_min, tm->tm_hour,
195                 tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
196
197         buf[0] = RS5C_ADDR(RS5C372_REG_SECS);
198         buf[1] = BIN2BCD(tm->tm_sec);
199         buf[2] = BIN2BCD(tm->tm_min);
200         buf[3] = rs5c_hr2reg(rs5c, tm->tm_hour);
201         buf[4] = BIN2BCD(tm->tm_wday);
202         buf[5] = BIN2BCD(tm->tm_mday);
203         buf[6] = BIN2BCD(tm->tm_mon + 1);
204         buf[7] = BIN2BCD(tm->tm_year - 100);
205
206         if ((i2c_master_send(client, buf, 8)) != 8) {
207                 dev_err(&client->dev, "%s: write error\n", __func__);
208                 return -EIO;
209         }
210
211         return 0;
212 }
213
214 #if defined(CONFIG_RTC_INTF_PROC) || defined(CONFIG_RTC_INTF_PROC_MODULE)
215 #define NEED_TRIM
216 #endif
217
218 #if defined(CONFIG_RTC_INTF_SYSFS) || defined(CONFIG_RTC_INTF_SYSFS_MODULE)
219 #define NEED_TRIM
220 #endif
221
222 #ifdef  NEED_TRIM
223 static int rs5c372_get_trim(struct i2c_client *client, int *osc, int *trim)
224 {
225         struct rs5c372 *rs5c372 = i2c_get_clientdata(client);
226         u8 tmp = rs5c372->regs[RS5C372_REG_TRIM];
227
228         if (osc)
229                 *osc = (tmp & RS5C372_TRIM_XSL) ? 32000 : 32768;
230
231         if (trim) {
232                 dev_dbg(&client->dev, "%s: raw trim=%x\n", __func__, tmp);
233                 tmp &= RS5C372_TRIM_MASK;
234                 if (tmp & 0x3e) {
235                         int t = tmp & 0x3f;
236
237                         if (tmp & 0x40)
238                                 t = (~t | (s8)0xc0) + 1;
239                         else
240                                 t = t - 1;
241
242                         tmp = t * 2;
243                 } else
244                         tmp = 0;
245                 *trim = tmp;
246         }
247
248         return 0;
249 }
250 #endif
251
252 static int rs5c372_rtc_read_time(struct device *dev, struct rtc_time *tm)
253 {
254         return rs5c372_get_datetime(to_i2c_client(dev), tm);
255 }
256
257 static int rs5c372_rtc_set_time(struct device *dev, struct rtc_time *tm)
258 {
259         return rs5c372_set_datetime(to_i2c_client(dev), tm);
260 }
261
262 #if defined(CONFIG_RTC_INTF_DEV) || defined(CONFIG_RTC_INTF_DEV_MODULE)
263
264 static int
265 rs5c_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
266 {
267         struct i2c_client       *client = to_i2c_client(dev);
268         struct rs5c372          *rs5c = i2c_get_clientdata(client);
269         unsigned char           buf[2];
270         int                     status;
271
272         buf[1] = rs5c->regs[RS5C_REG_CTRL1];
273         switch (cmd) {
274         case RTC_UIE_OFF:
275         case RTC_UIE_ON:
276                 /* some 327a modes use a different IRQ pin for 1Hz irqs */
277                 if (rs5c->type == rtc_rs5c372a
278                                 && (buf[1] & RS5C372A_CTRL1_SL1))
279                         return -ENOIOCTLCMD;
280         case RTC_AIE_OFF:
281         case RTC_AIE_ON:
282                 /* these irq management calls only make sense for chips
283                  * which are wired up to an IRQ.
284                  */
285                 if (!rs5c->has_irq)
286                         return -ENOIOCTLCMD;
287                 break;
288         default:
289                 return -ENOIOCTLCMD;
290         }
291
292         status = rs5c_get_regs(rs5c);
293         if (status < 0)
294                 return status;
295
296         buf[0] = RS5C_ADDR(RS5C_REG_CTRL1);
297         switch (cmd) {
298         case RTC_AIE_OFF:       /* alarm off */
299                 buf[1] &= ~RS5C_CTRL1_AALE;
300                 break;
301         case RTC_AIE_ON:        /* alarm on */
302                 buf[1] |= RS5C_CTRL1_AALE;
303                 break;
304         case RTC_UIE_OFF:       /* update off */
305                 buf[1] &= ~RS5C_CTRL1_CT_MASK;
306                 break;
307         case RTC_UIE_ON:        /* update on */
308                 buf[1] &= ~RS5C_CTRL1_CT_MASK;
309                 buf[1] |= RS5C_CTRL1_CT4;
310                 break;
311         }
312         if ((i2c_master_send(client, buf, 2)) != 2) {
313                 printk(KERN_WARNING "%s: can't update alarm\n",
314                         rs5c->rtc->name);
315                 status = -EIO;
316         } else
317                 rs5c->regs[RS5C_REG_CTRL1] = buf[1];
318         return status;
319 }
320
321 #else
322 #define rs5c_rtc_ioctl  NULL
323 #endif
324
325
326 /* NOTE:  Since RTC_WKALM_{RD,SET} were originally defined for EFI,
327  * which only exposes a polled programming interface; and since
328  * these calls map directly to those EFI requests; we don't demand
329  * we have an IRQ for this chip when we go through this API.
330  *
331  * The older x86_pc derived RTC_ALM_{READ,SET} calls require irqs
332  * though, managed through RTC_AIE_{ON,OFF} requests.
333  */
334
335 static int rs5c_read_alarm(struct device *dev, struct rtc_wkalrm *t)
336 {
337         struct i2c_client       *client = to_i2c_client(dev);
338         struct rs5c372          *rs5c = i2c_get_clientdata(client);
339         int                     status;
340
341         status = rs5c_get_regs(rs5c);
342         if (status < 0)
343                 return status;
344
345         /* report alarm time */
346         t->time.tm_sec = 0;
347         t->time.tm_min = BCD2BIN(rs5c->regs[RS5C_REG_ALARM_A_MIN] & 0x7f);
348         t->time.tm_hour = rs5c_reg2hr(rs5c, rs5c->regs[RS5C_REG_ALARM_A_HOURS]);
349         t->time.tm_mday = -1;
350         t->time.tm_mon = -1;
351         t->time.tm_year = -1;
352         t->time.tm_wday = -1;
353         t->time.tm_yday = -1;
354         t->time.tm_isdst = -1;
355
356         /* ... and status */
357         t->enabled = !!(rs5c->regs[RS5C_REG_CTRL1] & RS5C_CTRL1_AALE);
358         t->pending = !!(rs5c->regs[RS5C_REG_CTRL2] & RS5C_CTRL2_AAFG);
359
360         return 0;
361 }
362
363 static int rs5c_set_alarm(struct device *dev, struct rtc_wkalrm *t)
364 {
365         struct i2c_client       *client = to_i2c_client(dev);
366         struct rs5c372          *rs5c = i2c_get_clientdata(client);
367         int                     status;
368         unsigned char           buf[4];
369
370         /* only handle up to 24 hours in the future, like RTC_ALM_SET */
371         if (t->time.tm_mday != -1
372                         || t->time.tm_mon != -1
373                         || t->time.tm_year != -1)
374                 return -EINVAL;
375
376         /* REVISIT: round up tm_sec */
377
378         /* if needed, disable irq (clears pending status) */
379         status = rs5c_get_regs(rs5c);
380         if (status < 0)
381                 return status;
382         if (rs5c->regs[RS5C_REG_CTRL1] & RS5C_CTRL1_AALE) {
383                 buf[0] = RS5C_ADDR(RS5C_REG_CTRL1);
384                 buf[1] = rs5c->regs[RS5C_REG_CTRL1] & ~RS5C_CTRL1_AALE;
385                 if (i2c_master_send(client, buf, 2) != 2) {
386                         pr_debug("%s: can't disable alarm\n", rs5c->rtc->name);
387                         return -EIO;
388                 }
389                 rs5c->regs[RS5C_REG_CTRL1] = buf[1];
390         }
391
392         /* set alarm */
393         buf[0] = RS5C_ADDR(RS5C_REG_ALARM_A_MIN);
394         buf[1] = BIN2BCD(t->time.tm_min);
395         buf[2] = rs5c_hr2reg(rs5c, t->time.tm_hour);
396         buf[3] = 0x7f;  /* any/all days */
397         if ((i2c_master_send(client, buf, 4)) != 4) {
398                 pr_debug("%s: can't set alarm time\n", rs5c->rtc->name);
399                 return -EIO;
400         }
401
402         /* ... and maybe enable its irq */
403         if (t->enabled) {
404                 buf[0] = RS5C_ADDR(RS5C_REG_CTRL1);
405                 buf[1] = rs5c->regs[RS5C_REG_CTRL1] | RS5C_CTRL1_AALE;
406                 if ((i2c_master_send(client, buf, 2)) != 2)
407                         printk(KERN_WARNING "%s: can't enable alarm\n",
408                                 rs5c->rtc->name);
409                 rs5c->regs[RS5C_REG_CTRL1] = buf[1];
410         }
411
412         return 0;
413 }
414
415 #if defined(CONFIG_RTC_INTF_PROC) || defined(CONFIG_RTC_INTF_PROC_MODULE)
416
417 static int rs5c372_rtc_proc(struct device *dev, struct seq_file *seq)
418 {
419         int err, osc, trim;
420
421         err = rs5c372_get_trim(to_i2c_client(dev), &osc, &trim);
422         if (err == 0) {
423                 seq_printf(seq, "crystal\t\t: %d.%03d KHz\n",
424                                 osc / 1000, osc % 1000);
425                 seq_printf(seq, "trim\t\t: %d\n", trim);
426         }
427
428         return 0;
429 }
430
431 #else
432 #define rs5c372_rtc_proc        NULL
433 #endif
434
435 static const struct rtc_class_ops rs5c372_rtc_ops = {
436         .proc           = rs5c372_rtc_proc,
437         .ioctl          = rs5c_rtc_ioctl,
438         .read_time      = rs5c372_rtc_read_time,
439         .set_time       = rs5c372_rtc_set_time,
440         .read_alarm     = rs5c_read_alarm,
441         .set_alarm      = rs5c_set_alarm,
442 };
443
444 #if defined(CONFIG_RTC_INTF_SYSFS) || defined(CONFIG_RTC_INTF_SYSFS_MODULE)
445
446 static ssize_t rs5c372_sysfs_show_trim(struct device *dev,
447                                 struct device_attribute *attr, char *buf)
448 {
449         int err, trim;
450
451         err = rs5c372_get_trim(to_i2c_client(dev), NULL, &trim);
452         if (err)
453                 return err;
454
455         return sprintf(buf, "%d\n", trim);
456 }
457 static DEVICE_ATTR(trim, S_IRUGO, rs5c372_sysfs_show_trim, NULL);
458
459 static ssize_t rs5c372_sysfs_show_osc(struct device *dev,
460                                 struct device_attribute *attr, char *buf)
461 {
462         int err, osc;
463
464         err = rs5c372_get_trim(to_i2c_client(dev), &osc, NULL);
465         if (err)
466                 return err;
467
468         return sprintf(buf, "%d.%03d KHz\n", osc / 1000, osc % 1000);
469 }
470 static DEVICE_ATTR(osc, S_IRUGO, rs5c372_sysfs_show_osc, NULL);
471
472 static int rs5c_sysfs_register(struct device *dev)
473 {
474         int err;
475
476         err = device_create_file(dev, &dev_attr_trim);
477         if (err)
478                 return err;
479         err = device_create_file(dev, &dev_attr_osc);
480         if (err)
481                 device_remove_file(dev, &dev_attr_trim);
482
483         return err;
484 }
485
486 static void rs5c_sysfs_unregister(struct device *dev)
487 {
488         device_remove_file(dev, &dev_attr_trim);
489         device_remove_file(dev, &dev_attr_osc);
490 }
491
492 #else
493 static int rs5c_sysfs_register(struct device *dev)
494 {
495         return 0;
496 }
497
498 static void rs5c_sysfs_unregister(struct device *dev)
499 {
500         /* nothing */
501 }
502 #endif  /* SYSFS */
503
504 static struct i2c_driver rs5c372_driver;
505
506 static int rs5c372_probe(struct i2c_client *client,
507                          const struct i2c_device_id *id)
508 {
509         int err = 0;
510         struct rs5c372 *rs5c372;
511         struct rtc_time tm;
512
513         dev_dbg(&client->dev, "%s\n", __func__);
514
515         if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
516                 err = -ENODEV;
517                 goto exit;
518         }
519
520         if (!(rs5c372 = kzalloc(sizeof(struct rs5c372), GFP_KERNEL))) {
521                 err = -ENOMEM;
522                 goto exit;
523         }
524
525         rs5c372->client = client;
526         i2c_set_clientdata(client, rs5c372);
527         rs5c372->type = id->driver_data;
528
529         /* we read registers 0x0f then 0x00-0x0f; skip the first one */
530         rs5c372->regs = &rs5c372->buf[1];
531
532         err = rs5c_get_regs(rs5c372);
533         if (err < 0)
534                 goto exit_kfree;
535
536         /* clock may be set for am/pm or 24 hr time */
537         switch (rs5c372->type) {
538         case rtc_rs5c372a:
539         case rtc_rs5c372b:
540                 /* alarm uses ALARM_A; and nINTRA on 372a, nINTR on 372b.
541                  * so does periodic irq, except some 327a modes.
542                  */
543                 if (rs5c372->regs[RS5C_REG_CTRL2] & RS5C372_CTRL2_24)
544                         rs5c372->time24 = 1;
545                 break;
546         case rtc_rv5c386:
547         case rtc_rv5c387a:
548                 if (rs5c372->regs[RS5C_REG_CTRL1] & RV5C387_CTRL1_24)
549                         rs5c372->time24 = 1;
550                 /* alarm uses ALARM_W; and nINTRB for alarm and periodic
551                  * irq, on both 386 and 387
552                  */
553                 break;
554         default:
555                 dev_err(&client->dev, "unknown RTC type\n");
556                 goto exit_kfree;
557         }
558
559         /* if the oscillator lost power and no other software (like
560          * the bootloader) set it up, do it here.
561          */
562         if (rs5c372->regs[RS5C_REG_CTRL2] & RS5C_CTRL2_XSTP) {
563                 unsigned char buf[3];
564
565                 rs5c372->regs[RS5C_REG_CTRL2] &= ~RS5C_CTRL2_XSTP;
566
567                 buf[0] = RS5C_ADDR(RS5C_REG_CTRL1);
568                 buf[1] = rs5c372->regs[RS5C_REG_CTRL1];
569                 buf[2] = rs5c372->regs[RS5C_REG_CTRL2];
570
571                 /* use 24hr mode */
572                 switch (rs5c372->type) {
573                 case rtc_rs5c372a:
574                 case rtc_rs5c372b:
575                         buf[2] |= RS5C372_CTRL2_24;
576                         rs5c372->time24 = 1;
577                         break;
578                 case rtc_rv5c386:
579                 case rtc_rv5c387a:
580                         buf[1] |= RV5C387_CTRL1_24;
581                         rs5c372->time24 = 1;
582                         break;
583                 default:
584                         /* impossible */
585                         break;
586                 }
587
588                 if ((i2c_master_send(client, buf, 3)) != 3) {
589                         dev_err(&client->dev, "setup error\n");
590                         goto exit_kfree;
591                 }
592                 rs5c372->regs[RS5C_REG_CTRL1] = buf[1];
593                 rs5c372->regs[RS5C_REG_CTRL2] = buf[2];
594         }
595
596         if (rs5c372_get_datetime(client, &tm) < 0)
597                 dev_warn(&client->dev, "clock needs to be set\n");
598
599         dev_info(&client->dev, "%s found, %s, driver version " DRV_VERSION "\n",
600                         ({ char *s; switch (rs5c372->type) {
601                         case rtc_rs5c372a:      s = "rs5c372a"; break;
602                         case rtc_rs5c372b:      s = "rs5c372b"; break;
603                         case rtc_rv5c386:       s = "rv5c386"; break;
604                         case rtc_rv5c387a:      s = "rv5c387a"; break;
605                         default:                s = "chip"; break;
606                         }; s;}),
607                         rs5c372->time24 ? "24hr" : "am/pm"
608                         );
609
610         /* REVISIT use client->irq to register alarm irq ... */
611
612         rs5c372->rtc = rtc_device_register(rs5c372_driver.driver.name,
613                                 &client->dev, &rs5c372_rtc_ops, THIS_MODULE);
614
615         if (IS_ERR(rs5c372->rtc)) {
616                 err = PTR_ERR(rs5c372->rtc);
617                 goto exit_kfree;
618         }
619
620         err = rs5c_sysfs_register(&client->dev);
621         if (err)
622                 goto exit_devreg;
623
624         return 0;
625
626 exit_devreg:
627         rtc_device_unregister(rs5c372->rtc);
628
629 exit_kfree:
630         kfree(rs5c372);
631
632 exit:
633         return err;
634 }
635
636 static int rs5c372_remove(struct i2c_client *client)
637 {
638         struct rs5c372 *rs5c372 = i2c_get_clientdata(client);
639
640         rtc_device_unregister(rs5c372->rtc);
641         rs5c_sysfs_unregister(&client->dev);
642         kfree(rs5c372);
643         return 0;
644 }
645
646 static struct i2c_driver rs5c372_driver = {
647         .driver         = {
648                 .name   = "rtc-rs5c372",
649         },
650         .probe          = rs5c372_probe,
651         .remove         = rs5c372_remove,
652         .id_table       = rs5c372_id,
653 };
654
655 static __init int rs5c372_init(void)
656 {
657         return i2c_add_driver(&rs5c372_driver);
658 }
659
660 static __exit void rs5c372_exit(void)
661 {
662         i2c_del_driver(&rs5c372_driver);
663 }
664
665 module_init(rs5c372_init);
666 module_exit(rs5c372_exit);
667
668 MODULE_AUTHOR(
669                 "Pavel Mironchik <pmironchik@optifacio.net>, "
670                 "Alessandro Zummo <a.zummo@towertech.it>");
671 MODULE_DESCRIPTION("Ricoh RS5C372 RTC driver");
672 MODULE_LICENSE("GPL");
673 MODULE_VERSION(DRV_VERSION);