2 * Zoran zr36057/zr36067 PCI controller driver, for the
3 * Pinnacle/Miro DC10/DC10+/DC30/DC30+, Iomega Buz, Linux
4 * Media Labs LML33/LML33R10.
6 * This part handles device access (PCI/I2C/codec/...)
8 * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx>
10 * Currently maintained by:
11 * Ronald Bultje <rbultje@ronald.bitfreak.net>
12 * Laurent Pinchart <laurent.pinchart@skynet.be>
13 * Mailinglist <mjpeg-users@lists.sf.net>
15 * This program is free software; you can redistribute it and/or modify
16 * it under the terms of the GNU General Public License as published by
17 * the Free Software Foundation; either version 2 of the License, or
18 * (at your option) any later version.
20 * This program is distributed in the hope that it will be useful,
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23 * GNU General Public License for more details.
25 * You should have received a copy of the GNU General Public License
26 * along with this program; if not, write to the Free Software
27 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
30 #include <linux/types.h>
31 #include <linux/kernel.h>
32 #include <linux/module.h>
33 #include <linux/vmalloc.h>
34 #include <linux/byteorder/generic.h>
36 #include <linux/interrupt.h>
37 #include <linux/proc_fs.h>
38 #include <linux/i2c.h>
39 #include <linux/i2c-algo-bit.h>
40 #include <linux/videodev.h>
41 #include <linux/spinlock.h>
42 #include <linux/sem.h>
44 #include <linux/pci.h>
45 #include <linux/video_decoder.h>
46 #include <linux/video_encoder.h>
47 #include <linux/delay.h>
48 #include <linux/wait.h>
52 #include "videocodec.h"
54 #include "zoran_device.h"
56 #define IRQ_MASK ( ZR36057_ISR_GIRQ0 | \
58 ZR36057_ISR_JPEGRepIRQ )
60 extern const struct zoran_format zoran_formats[];
64 #define dprintk(num, format, args...) \
66 if (*zr_debug >= num) \
67 printk(format, ##args); \
70 static int lml33dpath = 0; /* 1 will use digital path in capture
71 * mode instead of analog. It can be
72 * used for picture adjustments using
73 * tool like xawtv while watching image
74 * on TV monitor connected to the output.
75 * However, due to absence of 75 Ohm
76 * load on Bt819 input, there will be
77 * some image imperfections */
79 module_param(lml33dpath, bool, 0);
80 MODULE_PARM_DESC(lml33dpath,
81 "Use digital path capture mode (on LML33 cards)");
84 zr36057_init_vfe (struct zoran *zr);
87 * General Purpose I/O and Guest bus access
91 * This is a bit tricky. When a board lacks a GPIO function, the corresponding
92 * GPIO bit number in the card_info structure is set to 0.
96 GPIO (struct zoran *zr,
103 /* Make sure the bit number is legal
104 * A bit number of -1 (lacking) gives a mask of 0,
105 * making it harmless */
106 mask = (1 << (24 + bit)) & 0xff000000;
107 reg = btread(ZR36057_GPPGCR1) & ~mask;
111 btwrite(reg, ZR36057_GPPGCR1);
116 * Wait til post office is no longer busy
120 post_office_wait (struct zoran *zr)
124 // while (((por = btread(ZR36057_POR)) & (ZR36057_POR_POPen | ZR36057_POR_POTime)) == ZR36057_POR_POPen) {
125 while ((por = btread(ZR36057_POR)) & ZR36057_POR_POPen) {
126 /* wait for something to happen */
128 if ((por & ZR36057_POR_POTime) && !zr->card.gws_not_connected) {
129 /* In LML33/BUZ \GWS line is not connected, so it has always timeout set */
130 dprintk(1, KERN_INFO "%s: pop timeout %08x\n", ZR_DEVNAME(zr),
139 post_office_write (struct zoran *zr,
147 ZR36057_POR_PODir | ZR36057_POR_POTime | ((guest & 7) << 20) |
148 ((reg & 7) << 16) | (value & 0xFF);
149 btwrite(por, ZR36057_POR);
151 return post_office_wait(zr);
155 post_office_read (struct zoran *zr,
161 por = ZR36057_POR_POTime | ((guest & 7) << 20) | ((reg & 7) << 16);
162 btwrite(por, ZR36057_POR);
163 if (post_office_wait(zr) < 0) {
167 return btread(ZR36057_POR) & 0xFF;
175 dump_guests (struct zoran *zr)
180 for (i = 1; i < 8; i++) { // Don't read jpeg codec here
181 guest[i] = post_office_read(zr, i, 0);
184 printk(KERN_INFO "%s: Guests:", ZR_DEVNAME(zr));
186 for (i = 1; i < 8; i++) {
187 printk(" 0x%02x", guest[i]);
193 static inline unsigned long
198 do_gettimeofday(&tv);
199 return (1000000 * tv.tv_sec + tv.tv_usec);
203 detect_guest_activity (struct zoran *zr)
205 int timeout, i, j, res, guest[8], guest0[8], change[8][3];
206 unsigned long t0, t1;
209 printk(KERN_INFO "%s: Detecting guests activity, please wait...\n",
211 for (i = 1; i < 8; i++) { // Don't read jpeg codec here
212 guest0[i] = guest[i] = post_office_read(zr, i, 0);
218 while (timeout < 10000) {
221 for (i = 1; (i < 8) && (j < 8); i++) {
222 res = post_office_read(zr, i, 0);
223 if (res != guest[i]) {
225 change[j][0] = (t1 - t0);
236 printk(KERN_INFO "%s: Guests:", ZR_DEVNAME(zr));
238 for (i = 1; i < 8; i++) {
239 printk(" 0x%02x", guest0[i]);
243 printk(KERN_INFO "%s: No activity detected.\n", ZR_DEVNAME(zr));
246 for (i = 0; i < j; i++) {
247 printk(KERN_INFO "%s: %6d: %d => 0x%02x\n", ZR_DEVNAME(zr),
248 change[i][0], change[i][1], change[i][2]);
257 jpeg_codec_sleep (struct zoran *zr,
260 GPIO(zr, zr->card.gpio[GPIO_JPEG_SLEEP], !sleep);
264 "%s: jpeg_codec_sleep() - wake GPIO=0x%08x\n",
265 ZR_DEVNAME(zr), btread(ZR36057_GPPGCR1));
270 "%s: jpeg_codec_sleep() - sleep GPIO=0x%08x\n",
271 ZR_DEVNAME(zr), btread(ZR36057_GPPGCR1));
277 jpeg_codec_reset (struct zoran *zr)
279 /* Take the codec out of sleep */
280 jpeg_codec_sleep(zr, 0);
282 if (zr->card.gpcs[GPCS_JPEG_RESET] != 0xff) {
283 post_office_write(zr, zr->card.gpcs[GPCS_JPEG_RESET], 0,
287 GPIO(zr, zr->card.gpio[GPIO_JPEG_RESET], 0);
289 GPIO(zr, zr->card.gpio[GPIO_JPEG_RESET], 1);
297 * Set the registers for the size we have specified. Don't bother
298 * trying to understand this without the ZR36057 manual in front of
301 * PS: The manual is free for download in .pdf format from
302 * www.zoran.com - nicely done those folks.
306 zr36057_adjust_vfe (struct zoran *zr,
307 enum zoran_codec_mode mode)
312 case BUZ_MODE_MOTION_DECOMPRESS:
313 btand(~ZR36057_VFESPFR_ExtFl, ZR36057_VFESPFR);
314 reg = btread(ZR36057_VFEHCR);
315 if ((reg & (1 << 10)) && zr->card.type != LML33R10) {
316 reg += ((1 << 10) | 1);
318 btwrite(reg, ZR36057_VFEHCR);
320 case BUZ_MODE_MOTION_COMPRESS:
323 if (zr->norm == VIDEO_MODE_NTSC ||
324 (zr->card.type == LML33R10 &&
325 zr->norm == VIDEO_MODE_PAL))
326 btand(~ZR36057_VFESPFR_ExtFl, ZR36057_VFESPFR);
328 btor(ZR36057_VFESPFR_ExtFl, ZR36057_VFESPFR);
329 reg = btread(ZR36057_VFEHCR);
330 if (!(reg & (1 << 10)) && zr->card.type != LML33R10) {
331 reg -= ((1 << 10) | 1);
333 btwrite(reg, ZR36057_VFEHCR);
343 zr36057_set_vfe (struct zoran *zr,
346 const struct zoran_format *format)
349 unsigned HStart, HEnd, VStart, VEnd;
351 unsigned VidWinWid, VidWinHt;
352 unsigned hcrop1, hcrop2, vcrop1, vcrop2;
353 unsigned Wa, We, Ha, He;
354 unsigned X, Y, HorDcm, VerDcm;
356 unsigned mask_line_size;
363 dprintk(2, KERN_INFO "%s: set_vfe() - width = %d, height = %d\n",
364 ZR_DEVNAME(zr), video_width, video_height);
366 if (zr->norm != VIDEO_MODE_PAL &&
367 zr->norm != VIDEO_MODE_NTSC &&
368 zr->norm != VIDEO_MODE_SECAM) {
370 KERN_ERR "%s: set_vfe() - norm = %d not valid\n",
371 ZR_DEVNAME(zr), zr->norm);
374 if (video_width < BUZ_MIN_WIDTH ||
375 video_height < BUZ_MIN_HEIGHT ||
376 video_width > Wa || video_height > Ha) {
377 dprintk(1, KERN_ERR "%s: set_vfe: w=%d h=%d not valid\n",
378 ZR_DEVNAME(zr), video_width, video_height);
385 VidWinWid = video_width;
386 X = (VidWinWid * 64 + tvn->Wa - 1) / tvn->Wa;
387 We = (VidWinWid * 64) / X;
389 hcrop1 = 2 * ((tvn->Wa - We) / 4);
390 hcrop2 = tvn->Wa - We - hcrop1;
391 HStart = tvn->HStart ? tvn->HStart : 1;
392 /* (Ronald) Original comment:
393 * "| 1 Doesn't have any effect, tested on both a DC10 and a DC10+"
394 * this is false. It inverses chroma values on the LML33R10 (so Cr
395 * suddenly is shown as Cb and reverse, really cool effect if you
396 * want to see blue faces, not useful otherwise). So don't use |1.
397 * However, the DC10 has '0' as HStart, but does need |1, so we
398 * use a dirty check...
400 HEnd = HStart + tvn->Wa - 1;
403 reg = ((HStart & ZR36057_VFEHCR_Hmask) << ZR36057_VFEHCR_HStart)
404 | ((HEnd & ZR36057_VFEHCR_Hmask) << ZR36057_VFEHCR_HEnd);
405 if (zr->card.vfe_pol.hsync_pol)
406 reg |= ZR36057_VFEHCR_HSPol;
407 btwrite(reg, ZR36057_VFEHCR);
410 DispMode = !(video_height > BUZ_MAX_HEIGHT / 2);
411 VidWinHt = DispMode ? video_height : video_height / 2;
412 Y = (VidWinHt * 64 * 2 + tvn->Ha - 1) / tvn->Ha;
413 He = (VidWinHt * 64) / Y;
415 vcrop1 = (tvn->Ha / 2 - He) / 2;
416 vcrop2 = tvn->Ha / 2 - He - vcrop1;
417 VStart = tvn->VStart;
418 VEnd = VStart + tvn->Ha / 2; // - 1; FIXME SnapShot times out with -1 in 768*576 on the DC10 - LP
421 reg = ((VStart & ZR36057_VFEVCR_Vmask) << ZR36057_VFEVCR_VStart)
422 | ((VEnd & ZR36057_VFEVCR_Vmask) << ZR36057_VFEVCR_VEnd);
423 if (zr->card.vfe_pol.vsync_pol)
424 reg |= ZR36057_VFEVCR_VSPol;
425 btwrite(reg, ZR36057_VFEVCR);
427 /* scaler and pixel format */
429 reg |= (HorDcm << ZR36057_VFESPFR_HorDcm);
430 reg |= (VerDcm << ZR36057_VFESPFR_VerDcm);
431 reg |= (DispMode << ZR36057_VFESPFR_DispMode);
432 if (format->palette != VIDEO_PALETTE_YUV422 && format->palette != VIDEO_PALETTE_YUYV)
433 reg |= ZR36057_VFESPFR_LittleEndian;
434 /* RJ: I don't know, why the following has to be the opposite
435 * of the corresponding ZR36060 setting, but only this way
436 * we get the correct colors when uncompressing to the screen */
437 //reg |= ZR36057_VFESPFR_VCLKPol; /**/
438 /* RJ: Don't know if that is needed for NTSC also */
439 if (zr->norm != VIDEO_MODE_NTSC)
440 reg |= ZR36057_VFESPFR_ExtFl; // NEEDED!!!!!!! Wolfgang
441 reg |= ZR36057_VFESPFR_TopField;
442 switch (format->palette) {
444 case VIDEO_PALETTE_YUYV:
445 case VIDEO_PALETTE_YUV422:
446 reg |= ZR36057_VFESPFR_YUV422;
449 case VIDEO_PALETTE_RGB555:
450 reg |= ZR36057_VFESPFR_RGB555 | ZR36057_VFESPFR_ErrDif;
453 case VIDEO_PALETTE_RGB565:
454 reg |= ZR36057_VFESPFR_RGB565 | ZR36057_VFESPFR_ErrDif;
457 case VIDEO_PALETTE_RGB24:
458 reg |= ZR36057_VFESPFR_RGB888 | ZR36057_VFESPFR_Pack24;
461 case VIDEO_PALETTE_RGB32:
462 reg |= ZR36057_VFESPFR_RGB888;
467 KERN_INFO "%s: set_vfe() - unknown color_fmt=%x\n",
468 ZR_DEVNAME(zr), format->palette);
473 reg |= 3 << ZR36057_VFESPFR_HFilter; /* 5 tap filter */
474 } else if (HorDcm >= 32) {
475 reg |= 2 << ZR36057_VFESPFR_HFilter; /* 4 tap filter */
476 } else if (HorDcm >= 16) {
477 reg |= 1 << ZR36057_VFESPFR_HFilter; /* 3 tap filter */
479 btwrite(reg, ZR36057_VFESPFR);
481 /* display configuration */
482 reg = (16 << ZR36057_VDCR_MinPix)
483 | (VidWinHt << ZR36057_VDCR_VidWinHt)
484 | (VidWinWid << ZR36057_VDCR_VidWinWid);
485 if (pci_pci_problems & PCIPCI_TRITON)
486 // || zr->revision < 1) // Revision 1 has also Triton support
487 reg &= ~ZR36057_VDCR_Triton;
489 reg |= ZR36057_VDCR_Triton;
490 btwrite(reg, ZR36057_VDCR);
492 /* (Ronald) don't write this if overlay_mask = NULL */
493 if (zr->overlay_mask) {
494 /* Write overlay clipping mask data, but don't enable overlay clipping */
495 /* RJ: since this makes only sense on the screen, we use
496 * zr->overlay_settings.width instead of video_width */
498 mask_line_size = (BUZ_MAX_WIDTH + 31) / 32;
499 reg = virt_to_bus(zr->overlay_mask);
500 btwrite(reg, ZR36057_MMTR);
501 reg = virt_to_bus(zr->overlay_mask + mask_line_size);
502 btwrite(reg, ZR36057_MMBR);
504 mask_line_size - (zr->overlay_settings.width +
507 reg += mask_line_size;
508 reg <<= ZR36057_OCR_MaskStride;
509 btwrite(reg, ZR36057_OCR);
512 zr36057_adjust_vfe(zr, zr->codec_mode);
516 * Switch overlay on or off
520 zr36057_overlay (struct zoran *zr,
526 /* do the necessary settings ... */
527 btand(~ZR36057_VDCR_VidEn, ZR36057_VDCR); /* switch it off first */
530 zr->overlay_settings.width,
531 zr->overlay_settings.height,
532 zr->overlay_settings.format);
534 /* Start and length of each line MUST be 4-byte aligned.
535 * This should be allready checked before the call to this routine.
536 * All error messages are internal driver checking only! */
538 /* video display top and bottom registers */
539 reg = (long) zr->buffer.base +
540 zr->overlay_settings.x *
541 ((zr->overlay_settings.format->depth + 7) / 8) +
542 zr->overlay_settings.y *
543 zr->buffer.bytesperline;
544 btwrite(reg, ZR36057_VDTR);
548 "%s: zr36057_overlay() - video_address not aligned\n",
550 if (zr->overlay_settings.height > BUZ_MAX_HEIGHT / 2)
551 reg += zr->buffer.bytesperline;
552 btwrite(reg, ZR36057_VDBR);
554 /* video stride, status, and frame grab register */
555 reg = zr->buffer.bytesperline -
556 zr->overlay_settings.width *
557 ((zr->overlay_settings.format->depth + 7) / 8);
558 if (zr->overlay_settings.height > BUZ_MAX_HEIGHT / 2)
559 reg += zr->buffer.bytesperline;
563 "%s: zr36057_overlay() - video_stride not aligned\n",
565 reg = (reg << ZR36057_VSSFGR_DispStride);
566 reg |= ZR36057_VSSFGR_VidOvf; /* clear overflow status */
567 btwrite(reg, ZR36057_VSSFGR);
569 /* Set overlay clipping */
570 if (zr->overlay_settings.clipcount > 0)
571 btor(ZR36057_OCR_OvlEnable, ZR36057_OCR);
573 /* ... and switch it on */
574 btor(ZR36057_VDCR_VidEn, ZR36057_VDCR);
577 btand(~ZR36057_VDCR_VidEn, ZR36057_VDCR);
582 * The overlay mask has one bit for each pixel on a scan line,
583 * and the maximum window size is BUZ_MAX_WIDTH * BUZ_MAX_HEIGHT pixels.
587 write_overlay_mask (struct file *file,
588 struct video_clip *vp,
591 struct zoran_fh *fh = file->private_data;
592 struct zoran *zr = fh->zr;
593 unsigned mask_line_size = (BUZ_MAX_WIDTH + 31) / 32;
595 int x, y, width, height;
599 /* fill mask with one bits */
600 memset(fh->overlay_mask, ~0, mask_line_size * 4 * BUZ_MAX_HEIGHT);
603 for (i = 0; i < count; ++i) {
604 /* pick up local copy of clip */
608 height = vp[i].height;
610 /* trim clips that extend beyond the window */
619 if (x + width > fh->overlay_settings.width) {
620 width = fh->overlay_settings.width - x;
622 if (y + height > fh->overlay_settings.height) {
623 height = fh->overlay_settings.height - y;
626 /* ignore degenerate clips */
634 /* apply clip for each scan line */
635 for (j = 0; j < height; ++j) {
636 /* reset bit for each pixel */
637 /* this can be optimized later if need be */
638 mask = fh->overlay_mask + (y + j) * mask_line_size;
639 for (k = 0; k < width; ++k) {
640 mask[(x + k) / 32] &=
641 ~((u32) 1 << (x + k) % 32);
647 /* Enable/Disable uncompressed memory grabbing of the 36057 */
650 zr36057_set_memgrab (struct zoran *zr,
654 if (btread(ZR36057_VSSFGR) &
655 (ZR36057_VSSFGR_SnapShot | ZR36057_VSSFGR_FrameGrab))
658 "%s: zr36057_set_memgrab(1) with SnapShot or FrameGrab on!?\n",
661 /* switch on VSync interrupts */
662 btwrite(IRQ_MASK, ZR36057_ISR); // Clear Interrupts
663 btor(zr->card.vsync_int, ZR36057_ICR); // SW
665 /* enable SnapShot */
666 btor(ZR36057_VSSFGR_SnapShot, ZR36057_VSSFGR);
668 /* Set zr36057 video front end and enable video */
669 zr36057_set_vfe(zr, zr->v4l_settings.width,
670 zr->v4l_settings.height,
671 zr->v4l_settings.format);
673 zr->v4l_memgrab_active = 1;
675 zr->v4l_memgrab_active = 0;
677 /* switch off VSync interrupts */
678 btand(~zr->card.vsync_int, ZR36057_ICR); // SW
680 /* reenable grabbing to screen if it was running */
681 if (zr->v4l_overlay_active) {
682 zr36057_overlay(zr, 1);
684 btand(~ZR36057_VDCR_VidEn, ZR36057_VDCR);
685 btand(~ZR36057_VSSFGR_SnapShot, ZR36057_VSSFGR);
691 wait_grab_pending (struct zoran *zr)
695 /* wait until all pending grabs are finished */
697 if (!zr->v4l_memgrab_active)
700 wait_event_interruptible(zr->v4l_capq,
701 (zr->v4l_pend_tail == zr->v4l_pend_head));
702 if (signal_pending(current))
705 spin_lock_irqsave(&zr->spinlock, flags);
706 zr36057_set_memgrab(zr, 0);
707 spin_unlock_irqrestore(&zr->spinlock, flags);
712 /*****************************************************************************
714 * Set up the Buz-specific MJPEG part *
716 *****************************************************************************/
719 set_frame (struct zoran *zr,
722 GPIO(zr, zr->card.gpio[GPIO_JPEG_FRAME], val);
726 set_videobus_dir (struct zoran *zr,
729 switch (zr->card.type) {
738 GPIO(zr, zr->card.gpio[GPIO_VID_DIR],
739 zr->card.gpio_pol[GPIO_VID_DIR] ? !val : val);
745 init_jpeg_queue (struct zoran *zr)
749 /* re-initialize DMA ring stuff */
750 zr->jpg_que_head = 0;
751 zr->jpg_dma_head = 0;
752 zr->jpg_dma_tail = 0;
753 zr->jpg_que_tail = 0;
758 zr->jpg_err_shift = 0;
759 zr->jpg_queued_num = 0;
760 for (i = 0; i < zr->jpg_buffers.num_buffers; i++) {
761 zr->jpg_buffers.buffer[i].state = BUZ_STATE_USER; /* nothing going on */
763 for (i = 0; i < BUZ_NUM_STAT_COM; i++) {
764 zr->stat_com[i] = cpu_to_le32(1); /* mark as unavailable to zr36057 */
769 zr36057_set_jpg (struct zoran *zr,
770 enum zoran_codec_mode mode)
777 /* assert P_Reset, disable code transfer, deassert Active */
778 btwrite(0, ZR36057_JPC);
780 /* MJPEG compression mode */
783 case BUZ_MODE_MOTION_COMPRESS:
785 reg = ZR36057_JMC_MJPGCmpMode;
788 case BUZ_MODE_MOTION_DECOMPRESS:
789 reg = ZR36057_JMC_MJPGExpMode;
790 reg |= ZR36057_JMC_SyncMstr;
791 /* RJ: The following is experimental - improves the output to screen */
792 //if(zr->jpg_settings.VFIFO_FB) reg |= ZR36057_JMC_VFIFO_FB; // No, it doesn't. SM
795 case BUZ_MODE_STILL_COMPRESS:
796 reg = ZR36057_JMC_JPGCmpMode;
799 case BUZ_MODE_STILL_DECOMPRESS:
800 reg = ZR36057_JMC_JPGExpMode;
804 reg |= ZR36057_JMC_JPG;
805 if (zr->jpg_settings.field_per_buff == 1)
806 reg |= ZR36057_JMC_Fld_per_buff;
807 btwrite(reg, ZR36057_JMC);
810 btor(ZR36057_VFEVCR_VSPol, ZR36057_VFEVCR);
811 reg = (6 << ZR36057_VSP_VsyncSize) |
812 (tvn->Ht << ZR36057_VSP_FrmTot);
813 btwrite(reg, ZR36057_VSP);
814 reg = ((zr->jpg_settings.img_y + tvn->VStart) << ZR36057_FVAP_NAY) |
815 (zr->jpg_settings.img_height << ZR36057_FVAP_PAY);
816 btwrite(reg, ZR36057_FVAP);
819 if (zr->card.vfe_pol.hsync_pol)
820 btor(ZR36057_VFEHCR_HSPol, ZR36057_VFEHCR);
822 btand(~ZR36057_VFEHCR_HSPol, ZR36057_VFEHCR);
823 reg = ((tvn->HSyncStart) << ZR36057_HSP_HsyncStart) |
824 (tvn->Wt << ZR36057_HSP_LineTot);
825 btwrite(reg, ZR36057_HSP);
826 reg = ((zr->jpg_settings.img_x +
827 tvn->HStart + 4) << ZR36057_FHAP_NAX) |
828 (zr->jpg_settings.img_width << ZR36057_FHAP_PAX);
829 btwrite(reg, ZR36057_FHAP);
831 /* field process parameters */
832 if (zr->jpg_settings.odd_even)
833 reg = ZR36057_FPP_Odd_Even;
837 btwrite(reg, ZR36057_FPP);
839 /* Set proper VCLK Polarity, else colors will be wrong during playback */
840 //btor(ZR36057_VFESPFR_VCLKPol, ZR36057_VFESPFR);
842 /* code base address */
843 reg = virt_to_bus(zr->stat_com);
844 btwrite(reg, ZR36057_JCBA);
846 /* FIFO threshold (FIFO is 160. double words) */
847 /* NOTE: decimal values here */
850 case BUZ_MODE_STILL_COMPRESS:
851 case BUZ_MODE_MOTION_COMPRESS:
852 if (zr->card.type != BUZ)
858 case BUZ_MODE_STILL_DECOMPRESS:
859 case BUZ_MODE_MOTION_DECOMPRESS:
868 btwrite(reg, ZR36057_JCFT);
869 zr36057_adjust_vfe(zr, mode);
874 print_interrupts (struct zoran *zr)
878 printk(KERN_INFO "%s: interrupts received:", ZR_DEVNAME(zr));
879 if ((res = zr->field_counter) < -1 || res > 1) {
880 printk(" FD:%d", res);
882 if ((res = zr->intr_counter_GIRQ1) != 0) {
883 printk(" GIRQ1:%d", res);
886 if ((res = zr->intr_counter_GIRQ0) != 0) {
887 printk(" GIRQ0:%d", res);
890 if ((res = zr->intr_counter_CodRepIRQ) != 0) {
891 printk(" CodRepIRQ:%d", res);
894 if ((res = zr->intr_counter_JPEGRepIRQ) != 0) {
895 printk(" JPEGRepIRQ:%d", res);
898 if (zr->JPEG_max_missed) {
899 printk(" JPEG delays: max=%d min=%d", zr->JPEG_max_missed,
900 zr->JPEG_min_missed);
902 if (zr->END_event_missed) {
903 printk(" ENDs missed: %d", zr->END_event_missed);
905 //if (zr->jpg_queued_num) {
906 printk(" queue_state=%ld/%ld/%ld/%ld", zr->jpg_que_tail,
907 zr->jpg_dma_tail, zr->jpg_dma_head, zr->jpg_que_head);
910 printk(": no interrupts detected.");
916 clear_interrupt_counters (struct zoran *zr)
918 zr->intr_counter_GIRQ1 = 0;
919 zr->intr_counter_GIRQ0 = 0;
920 zr->intr_counter_CodRepIRQ = 0;
921 zr->intr_counter_JPEGRepIRQ = 0;
922 zr->field_counter = 0;
929 zr->END_event_missed = 0;
931 zr->JPEG_max_missed = 0;
932 zr->JPEG_min_missed = 0x7fffffff;
936 count_reset_interrupt (struct zoran *zr)
940 if ((isr = btread(ZR36057_ISR) & 0x78000000)) {
941 if (isr & ZR36057_ISR_GIRQ1) {
942 btwrite(ZR36057_ISR_GIRQ1, ZR36057_ISR);
943 zr->intr_counter_GIRQ1++;
945 if (isr & ZR36057_ISR_GIRQ0) {
946 btwrite(ZR36057_ISR_GIRQ0, ZR36057_ISR);
947 zr->intr_counter_GIRQ0++;
949 if (isr & ZR36057_ISR_CodRepIRQ) {
950 btwrite(ZR36057_ISR_CodRepIRQ, ZR36057_ISR);
951 zr->intr_counter_CodRepIRQ++;
953 if (isr & ZR36057_ISR_JPEGRepIRQ) {
954 btwrite(ZR36057_ISR_JPEGRepIRQ, ZR36057_ISR);
955 zr->intr_counter_JPEGRepIRQ++;
962 extern void zr36016_write (struct videocodec *codec,
967 jpeg_start (struct zoran *zr)
973 /* deassert P_reset, disable code transfer, deassert Active */
974 btwrite(ZR36057_JPC_P_Reset, ZR36057_JPC);
975 /* stop flushing the internal code buffer */
976 btand(~ZR36057_MCTCR_CFlush, ZR36057_MCTCR);
977 /* enable code transfer */
978 btor(ZR36057_JPC_CodTrnsEn, ZR36057_JPC);
981 btwrite(IRQ_MASK, ZR36057_ISR);
982 /* enable the JPEG IRQs */
983 btwrite(zr->card.jpeg_int |
984 ZR36057_ICR_JPEGRepIRQ |
985 ZR36057_ICR_IntPinEn,
988 set_frame(zr, 0); // \FRAME
990 /* set the JPEG codec guest ID */
991 reg = (zr->card.gpcs[1] << ZR36057_JCGI_JPEGuestID) |
992 (0 << ZR36057_JCGI_JPEGuestReg);
993 btwrite(reg, ZR36057_JCGI);
995 if (zr->card.video_vfe == CODEC_TYPE_ZR36016 &&
996 zr->card.video_codec == CODEC_TYPE_ZR36050) {
997 /* Enable processing on the ZR36016 */
999 zr36016_write(zr->vfe, 0, 1);
1001 /* load the address of the GO register in the ZR36050 latch */
1002 post_office_write(zr, 0, 0, 0);
1006 btor(ZR36057_JPC_Active, ZR36057_JPC);
1008 /* enable the Go generation */
1009 btor(ZR36057_JMC_Go_en, ZR36057_JMC);
1012 set_frame(zr, 1); // /FRAME
1014 dprintk(3, KERN_DEBUG "%s: jpeg_start\n", ZR_DEVNAME(zr));
1018 zr36057_enable_jpg (struct zoran *zr,
1019 enum zoran_codec_mode mode)
1021 static int zero = 0;
1023 struct vfe_settings cap;
1025 zr->jpg_buffers.buffer_size / zr->jpg_settings.field_per_buff;
1027 zr->codec_mode = mode;
1029 cap.x = zr->jpg_settings.img_x;
1030 cap.y = zr->jpg_settings.img_y;
1031 cap.width = zr->jpg_settings.img_width;
1032 cap.height = zr->jpg_settings.img_height;
1034 zr->jpg_settings.HorDcm | (zr->jpg_settings.VerDcm << 8);
1035 cap.quality = zr->jpg_settings.jpg_comp.quality;
1039 case BUZ_MODE_MOTION_COMPRESS: {
1040 struct jpeg_app_marker app;
1041 struct jpeg_com_marker com;
1043 /* In motion compress mode, the decoder output must be enabled, and
1044 * the video bus direction set to input.
1046 set_videobus_dir(zr, 0);
1047 decoder_command(zr, DECODER_ENABLE_OUTPUT, &one);
1048 encoder_command(zr, ENCODER_SET_INPUT, &zero);
1050 /* Take the JPEG codec and the VFE out of sleep */
1051 jpeg_codec_sleep(zr, 0);
1053 /* set JPEG app/com marker */
1054 app.appn = zr->jpg_settings.jpg_comp.APPn;
1055 app.len = zr->jpg_settings.jpg_comp.APP_len;
1056 memcpy(app.data, zr->jpg_settings.jpg_comp.APP_data, 60);
1057 zr->codec->control(zr->codec, CODEC_S_JPEG_APP_DATA,
1058 sizeof(struct jpeg_app_marker), &app);
1060 com.len = zr->jpg_settings.jpg_comp.COM_len;
1061 memcpy(com.data, zr->jpg_settings.jpg_comp.COM_data, 60);
1062 zr->codec->control(zr->codec, CODEC_S_JPEG_COM_DATA,
1063 sizeof(struct jpeg_com_marker), &com);
1065 /* Setup the JPEG codec */
1066 zr->codec->control(zr->codec, CODEC_S_JPEG_TDS_BYTE,
1067 sizeof(int), &field_size);
1068 zr->codec->set_video(zr->codec, zr->timing, &cap,
1070 zr->codec->set_mode(zr->codec, CODEC_DO_COMPRESSION);
1074 zr->vfe->control(zr->vfe, CODEC_S_JPEG_TDS_BYTE,
1075 sizeof(int), &field_size);
1076 zr->vfe->set_video(zr->vfe, zr->timing, &cap,
1078 zr->vfe->set_mode(zr->vfe, CODEC_DO_COMPRESSION);
1081 init_jpeg_queue(zr);
1082 zr36057_set_jpg(zr, mode); // \P_Reset, ... Video param, FIFO
1084 clear_interrupt_counters(zr);
1085 dprintk(2, KERN_INFO "%s: enable_jpg(MOTION_COMPRESS)\n",
1090 case BUZ_MODE_MOTION_DECOMPRESS:
1091 /* In motion decompression mode, the decoder output must be disabled, and
1092 * the video bus direction set to output.
1094 decoder_command(zr, DECODER_ENABLE_OUTPUT, &zero);
1095 set_videobus_dir(zr, 1);
1096 encoder_command(zr, ENCODER_SET_INPUT, &one);
1098 /* Take the JPEG codec and the VFE out of sleep */
1099 jpeg_codec_sleep(zr, 0);
1102 zr->vfe->set_video(zr->vfe, zr->timing, &cap,
1104 zr->vfe->set_mode(zr->vfe, CODEC_DO_EXPANSION);
1106 /* Setup the JPEG codec */
1107 zr->codec->set_video(zr->codec, zr->timing, &cap,
1109 zr->codec->set_mode(zr->codec, CODEC_DO_EXPANSION);
1111 init_jpeg_queue(zr);
1112 zr36057_set_jpg(zr, mode); // \P_Reset, ... Video param, FIFO
1114 clear_interrupt_counters(zr);
1115 dprintk(2, KERN_INFO "%s: enable_jpg(MOTION_DECOMPRESS)\n",
1121 /* shut down processing */
1122 btand(~(zr->card.jpeg_int | ZR36057_ICR_JPEGRepIRQ),
1124 btwrite(zr->card.jpeg_int | ZR36057_ICR_JPEGRepIRQ,
1126 btand(~ZR36057_JMC_Go_en, ZR36057_JMC); // \Go_en
1130 set_videobus_dir(zr, 0);
1131 set_frame(zr, 1); // /FRAME
1132 btor(ZR36057_MCTCR_CFlush, ZR36057_MCTCR); // /CFlush
1133 btwrite(0, ZR36057_JPC); // \P_Reset,\CodTrnsEn,\Active
1134 btand(~ZR36057_JMC_VFIFO_FB, ZR36057_JMC);
1135 btand(~ZR36057_JMC_SyncMstr, ZR36057_JMC);
1136 jpeg_codec_reset(zr);
1137 jpeg_codec_sleep(zr, 1);
1138 zr36057_adjust_vfe(zr, mode);
1140 decoder_command(zr, DECODER_ENABLE_OUTPUT, &one);
1141 encoder_command(zr, ENCODER_SET_INPUT, &zero);
1143 dprintk(2, KERN_INFO "%s: enable_jpg(IDLE)\n", ZR_DEVNAME(zr));
1149 /* when this is called the spinlock must be held */
1151 zoran_feed_stat_com (struct zoran *zr)
1153 /* move frames from pending queue to DMA */
1155 int frame, i, max_stat_com;
1158 (zr->jpg_settings.TmpDcm ==
1159 1) ? BUZ_NUM_STAT_COM : (BUZ_NUM_STAT_COM >> 1);
1161 while ((zr->jpg_dma_head - zr->jpg_dma_tail) < max_stat_com &&
1162 zr->jpg_dma_head < zr->jpg_que_head) {
1164 frame = zr->jpg_pend[zr->jpg_dma_head & BUZ_MASK_FRAME];
1165 if (zr->jpg_settings.TmpDcm == 1) {
1166 /* fill 1 stat_com entry */
1167 i = (zr->jpg_dma_head -
1168 zr->jpg_err_shift) & BUZ_MASK_STAT_COM;
1169 if (!(zr->stat_com[i] & cpu_to_le32(1)))
1172 cpu_to_le32(zr->jpg_buffers.buffer[frame].frag_tab_bus);
1174 /* fill 2 stat_com entries */
1175 i = ((zr->jpg_dma_head -
1176 zr->jpg_err_shift) & 1) * 2;
1177 if (!(zr->stat_com[i] & cpu_to_le32(1)))
1180 cpu_to_le32(zr->jpg_buffers.buffer[frame].frag_tab_bus);
1181 zr->stat_com[i + 1] =
1182 cpu_to_le32(zr->jpg_buffers.buffer[frame].frag_tab_bus);
1184 zr->jpg_buffers.buffer[frame].state = BUZ_STATE_DMA;
1188 if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS)
1189 zr->jpg_queued_num++;
1192 /* when this is called the spinlock must be held */
1194 zoran_reap_stat_com (struct zoran *zr)
1196 /* move frames from DMA queue to done queue */
1202 struct zoran_jpg_buffer *buffer;
1205 /* In motion decompress we don't have a hardware frame counter,
1206 * we just count the interrupts here */
1208 if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS) {
1211 while (zr->jpg_dma_tail < zr->jpg_dma_head) {
1212 if (zr->jpg_settings.TmpDcm == 1)
1213 i = (zr->jpg_dma_tail -
1214 zr->jpg_err_shift) & BUZ_MASK_STAT_COM;
1216 i = ((zr->jpg_dma_tail -
1217 zr->jpg_err_shift) & 1) * 2 + 1;
1219 stat_com = le32_to_cpu(zr->stat_com[i]);
1221 if ((stat_com & 1) == 0) {
1224 frame = zr->jpg_pend[zr->jpg_dma_tail & BUZ_MASK_FRAME];
1225 buffer = &zr->jpg_buffers.buffer[frame];
1226 do_gettimeofday(&buffer->bs.timestamp);
1228 if (zr->codec_mode == BUZ_MODE_MOTION_COMPRESS) {
1229 buffer->bs.length = (stat_com & 0x7fffff) >> 1;
1231 /* update sequence number with the help of the counter in stat_com */
1233 seq = ((stat_com >> 24) + zr->jpg_err_seq) & 0xff;
1234 dif = (seq - zr->jpg_seq_num) & 0xff;
1235 zr->jpg_seq_num += dif;
1237 buffer->bs.length = 0;
1240 zr->jpg_settings.TmpDcm ==
1241 2 ? (zr->jpg_seq_num >> 1) : zr->jpg_seq_num;
1242 buffer->state = BUZ_STATE_DONE;
1249 error_handler (struct zoran *zr,
1253 /* This is JPEG error handling part */
1254 if ((zr->codec_mode != BUZ_MODE_MOTION_COMPRESS) &&
1255 (zr->codec_mode != BUZ_MODE_MOTION_DECOMPRESS)) {
1256 //dprintk(1, KERN_ERR "%s: Internal error: error handling request in mode %d\n", ZR_DEVNAME(zr), zr->codec_mode);
1260 if ((stat & 1) == 0 &&
1261 zr->codec_mode == BUZ_MODE_MOTION_COMPRESS &&
1262 zr->jpg_dma_tail - zr->jpg_que_tail >=
1263 zr->jpg_buffers.num_buffers) {
1264 /* No free buffers... */
1265 zoran_reap_stat_com(zr);
1266 zoran_feed_stat_com(zr);
1267 wake_up_interruptible(&zr->jpg_capq);
1268 zr->JPEG_missed = 0;
1272 if (zr->JPEG_error != 1) {
1274 * First entry: error just happened during normal operation
1276 * In BUZ_MODE_MOTION_COMPRESS:
1278 * Possible glitch in TV signal. In this case we should
1279 * stop the codec and wait for good quality signal before
1280 * restarting it to avoid further problems
1282 * In BUZ_MODE_MOTION_DECOMPRESS:
1284 * Bad JPEG frame: we have to mark it as processed (codec crashed
1285 * and was not able to do it itself), and to remove it from queue.
1287 btand(~ZR36057_JMC_Go_en, ZR36057_JMC);
1289 stat = stat | (post_office_read(zr, 7, 0) & 3) << 8;
1290 btwrite(0, ZR36057_JPC);
1291 btor(ZR36057_MCTCR_CFlush, ZR36057_MCTCR);
1292 jpeg_codec_reset(zr);
1293 jpeg_codec_sleep(zr, 1);
1298 if (*zr_debug > 1 && zr->num_errors <= 8) {
1301 zr->jpg_pend[zr->jpg_dma_tail & BUZ_MASK_FRAME];
1303 "%s: JPEG error stat=0x%08x(0x%08x) queue_state=%ld/%ld/%ld/%ld seq=%ld frame=%ld. Codec stopped. ",
1304 ZR_DEVNAME(zr), stat, zr->last_isr,
1305 zr->jpg_que_tail, zr->jpg_dma_tail,
1306 zr->jpg_dma_head, zr->jpg_que_head,
1307 zr->jpg_seq_num, frame);
1308 printk("stat_com frames:");
1311 for (j = 0; j < BUZ_NUM_STAT_COM; j++) {
1313 i < zr->jpg_buffers.num_buffers;
1315 if (le32_to_cpu(zr->stat_com[j]) ==
1327 /* Find an entry in stat_com and rotate contents */
1331 if (zr->jpg_settings.TmpDcm == 1)
1332 i = (zr->jpg_dma_tail -
1333 zr->jpg_err_shift) & BUZ_MASK_STAT_COM;
1335 i = ((zr->jpg_dma_tail -
1336 zr->jpg_err_shift) & 1) * 2;
1337 if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS) {
1338 /* Mimic zr36067 operation */
1339 zr->stat_com[i] |= cpu_to_le32(1);
1340 if (zr->jpg_settings.TmpDcm != 1)
1341 zr->stat_com[i + 1] |= cpu_to_le32(1);
1343 zoran_reap_stat_com(zr);
1344 zoran_feed_stat_com(zr);
1345 wake_up_interruptible(&zr->jpg_capq);
1346 /* Find an entry in stat_com again after refill */
1347 if (zr->jpg_settings.TmpDcm == 1)
1348 i = (zr->jpg_dma_tail -
1349 zr->jpg_err_shift) &
1352 i = ((zr->jpg_dma_tail -
1353 zr->jpg_err_shift) & 1) * 2;
1356 /* Rotate stat_comm entries to make current entry first */
1358 u32 bus_addr[BUZ_NUM_STAT_COM];
1360 /* Here we are copying the stat_com array, which
1361 * is already in little endian format, so
1362 * no endian conversions here
1364 memcpy(bus_addr, zr->stat_com,
1366 for (j = 0; j < BUZ_NUM_STAT_COM; j++) {
1372 zr->jpg_err_shift += i;
1373 zr->jpg_err_shift &= BUZ_MASK_STAT_COM;
1375 if (zr->codec_mode == BUZ_MODE_MOTION_COMPRESS)
1376 zr->jpg_err_seq = zr->jpg_seq_num; /* + 1; */
1380 /* Now the stat_comm buffer is ready for restart */
1384 if (zr->codec_mode == BUZ_MODE_MOTION_COMPRESS) {
1385 decoder_command(zr, DECODER_GET_STATUS, &status);
1386 mode = CODEC_DO_COMPRESSION;
1389 mode = CODEC_DO_EXPANSION;
1391 if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS ||
1392 (status & DECODER_STATUS_GOOD)) {
1393 /********** RESTART code *************/
1394 jpeg_codec_reset(zr);
1395 zr->codec->set_mode(zr->codec, mode);
1396 zr36057_set_jpg(zr, zr->codec_mode);
1399 if (zr->num_errors <= 8)
1400 dprintk(2, KERN_INFO "%s: Restart\n",
1403 zr->JPEG_missed = 0;
1405 /********** End RESTART code ***********/
1417 unsigned long flags;
1423 /* Testing interrupts */
1424 spin_lock_irqsave(&zr->spinlock, flags);
1425 while ((stat = count_reset_interrupt(zr))) {
1426 if (count++ > 100) {
1427 btand(~ZR36057_ICR_IntPinEn, ZR36057_ICR);
1430 "%s: IRQ lockup while testing, isr=0x%08x, cleared int mask\n",
1431 ZR_DEVNAME(zr), stat);
1432 wake_up_interruptible(&zr->test_q);
1435 zr->last_isr = stat;
1436 spin_unlock_irqrestore(&zr->spinlock, flags);
1440 spin_lock_irqsave(&zr->spinlock, flags);
1442 /* get/clear interrupt status bits */
1443 stat = count_reset_interrupt(zr);
1444 astat = stat & IRQ_MASK;
1450 "zoran_irq: astat: 0x%08x, mask: 0x%08x\n",
1451 astat, btread(ZR36057_ICR));
1452 if (astat & zr->card.vsync_int) { // SW
1454 if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS ||
1455 zr->codec_mode == BUZ_MODE_MOTION_COMPRESS) {
1456 /* count missed interrupts */
1459 //post_office_read(zr,1,0);
1460 /* Interrupts may still happen when
1461 * zr->v4l_memgrab_active is switched off.
1462 * We simply ignore them */
1464 if (zr->v4l_memgrab_active) {
1466 /* A lot more checks should be here ... */
1467 if ((btread(ZR36057_VSSFGR) &
1468 ZR36057_VSSFGR_SnapShot) == 0)
1471 "%s: BuzIRQ with SnapShot off ???\n",
1474 if (zr->v4l_grab_frame != NO_GRAB_ACTIVE) {
1475 /* There is a grab on a frame going on, check if it has finished */
1477 if ((btread(ZR36057_VSSFGR) &
1478 ZR36057_VSSFGR_FrameGrab) ==
1480 /* it is finished, notify the user */
1482 zr->v4l_buffers.buffer[zr->v4l_grab_frame].state = BUZ_STATE_DONE;
1483 zr->v4l_buffers.buffer[zr->v4l_grab_frame].bs.seq = zr->v4l_grab_seq;
1484 do_gettimeofday(&zr->v4l_buffers.buffer[zr->v4l_grab_frame].bs.timestamp);
1485 zr->v4l_grab_frame = NO_GRAB_ACTIVE;
1486 zr->v4l_pend_tail++;
1490 if (zr->v4l_grab_frame == NO_GRAB_ACTIVE)
1491 wake_up_interruptible(&zr->v4l_capq);
1493 /* Check if there is another grab queued */
1495 if (zr->v4l_grab_frame == NO_GRAB_ACTIVE &&
1496 zr->v4l_pend_tail != zr->v4l_pend_head) {
1498 int frame = zr->v4l_pend[zr->v4l_pend_tail &
1502 zr->v4l_grab_frame = frame;
1504 /* Set zr36057 video front end and enable video */
1506 /* Buffer address */
1509 zr->v4l_buffers.buffer[frame].
1511 btwrite(reg, ZR36057_VDTR);
1512 if (zr->v4l_settings.height >
1517 btwrite(reg, ZR36057_VDBR);
1519 /* video stride, status, and frame grab register */
1521 if (zr->v4l_settings.height >
1528 ZR36057_VSSFGR_DispStride);
1529 reg |= ZR36057_VSSFGR_VidOvf;
1530 reg |= ZR36057_VSSFGR_SnapShot;
1531 reg |= ZR36057_VSSFGR_FrameGrab;
1532 btwrite(reg, ZR36057_VSSFGR);
1534 btor(ZR36057_VDCR_VidEn,
1539 /* even if we don't grab, we do want to increment
1540 * the sequence counter to see lost frames */
1543 #if (IRQ_MASK & ZR36057_ISR_CodRepIRQ)
1544 if (astat & ZR36057_ISR_CodRepIRQ) {
1545 zr->intr_counter_CodRepIRQ++;
1547 (KERN_DEBUG "%s: ZR36057_ISR_CodRepIRQ\n",
1549 btand(~ZR36057_ICR_CodRepIRQ, ZR36057_ICR);
1551 #endif /* (IRQ_MASK & ZR36057_ISR_CodRepIRQ) */
1553 #if (IRQ_MASK & ZR36057_ISR_JPEGRepIRQ)
1554 if (astat & ZR36057_ISR_JPEGRepIRQ) {
1556 if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS ||
1557 zr->codec_mode == BUZ_MODE_MOTION_COMPRESS) {
1558 if (*zr_debug > 1 &&
1559 (!zr->frame_num || zr->JPEG_error)) {
1561 "%s: first frame ready: state=0x%08x odd_even=%d field_per_buff=%d delay=%d\n",
1562 ZR_DEVNAME(zr), stat,
1563 zr->jpg_settings.odd_even,
1572 for (i = 0; i < 4; i++) {
1573 if (le32_to_cpu(zr->stat_com[i]) & 1)
1578 "%s: stat_com=%s queue_state=%ld/%ld/%ld/%ld\n",
1586 if (zr->JPEG_missed > zr->JPEG_max_missed) // Get statistics
1587 zr->JPEG_max_missed =
1589 if (zr->JPEG_missed <
1590 zr->JPEG_min_missed)
1591 zr->JPEG_min_missed =
1595 if (*zr_debug > 2 && zr->frame_num < 6) {
1597 printk("%s: seq=%ld stat_com:",
1598 ZR_DEVNAME(zr), zr->jpg_seq_num);
1599 for (i = 0; i < 4; i++) {
1601 le32_to_cpu(zr->stat_com[i]));
1606 zr->JPEG_missed = 0;
1608 zoran_reap_stat_com(zr);
1609 zoran_feed_stat_com(zr);
1610 wake_up_interruptible(&zr->jpg_capq);
1614 "%s: JPEG interrupt while not in motion (de)compress mode!\n",
1618 #endif /* (IRQ_MASK & ZR36057_ISR_JPEGRepIRQ) */
1620 /* DATERR, too many fields missed, error processing */
1621 if ((astat & zr->card.jpeg_int) ||
1622 zr->JPEG_missed > 25 ||
1623 zr->JPEG_error == 1 ||
1624 ((zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS) &&
1625 (zr->frame_num & (zr->JPEG_missed >
1626 zr->jpg_settings.field_per_buff)))) {
1627 error_handler(zr, astat, stat);
1632 dprintk(2, KERN_WARNING "%s: irq loop %d\n",
1633 ZR_DEVNAME(zr), count);
1635 btand(~ZR36057_ICR_IntPinEn, ZR36057_ICR);
1638 "%s: IRQ lockup, cleared int mask\n",
1643 zr->last_isr = stat;
1645 spin_unlock_irqrestore(&zr->spinlock, flags);
1651 zoran_set_pci_master (struct zoran *zr,
1655 pci_set_master(zr->pci_dev);
1659 pci_read_config_word(zr->pci_dev, PCI_COMMAND, &command);
1660 command &= ~PCI_COMMAND_MASTER;
1661 pci_write_config_word(zr->pci_dev, PCI_COMMAND, command);
1666 zoran_init_hardware (struct zoran *zr)
1670 /* Enable bus-mastering */
1671 zoran_set_pci_master(zr, 1);
1673 /* Initialize the board */
1674 if (zr->card.init) {
1678 j = zr->card.input[zr->input].muxsel;
1680 decoder_command(zr, 0, NULL);
1681 decoder_command(zr, DECODER_SET_NORM, &zr->norm);
1682 decoder_command(zr, DECODER_SET_INPUT, &j);
1684 encoder_command(zr, 0, NULL);
1685 encoder_command(zr, ENCODER_SET_NORM, &zr->norm);
1686 encoder_command(zr, ENCODER_SET_INPUT, &zero);
1688 /* toggle JPEG codec sleep to sync PLL */
1689 jpeg_codec_sleep(zr, 1);
1690 jpeg_codec_sleep(zr, 0);
1692 /* set individual interrupt enables (without GIRQ1)
1693 * but don't global enable until zoran_open() */
1695 //btwrite(IRQ_MASK & ~ZR36057_ISR_GIRQ1, ZR36057_ICR); // SW
1696 // It looks like using only JPEGRepIRQEn is not always reliable,
1697 // may be when JPEG codec crashes it won't generate IRQ? So,
1698 /*CP*/ // btwrite(IRQ_MASK, ZR36057_ICR); // Enable Vsync interrupts too. SM WHY ? LP
1699 zr36057_init_vfe(zr);
1701 zr36057_enable_jpg(zr, BUZ_MODE_IDLE);
1703 btwrite(IRQ_MASK, ZR36057_ISR); // Clears interrupts
1707 zr36057_restart (struct zoran *zr)
1709 btwrite(0, ZR36057_SPGPPCR);
1711 btor(ZR36057_SPGPPCR_SoftReset, ZR36057_SPGPPCR);
1714 /* assert P_Reset */
1715 btwrite(0, ZR36057_JPC);
1716 /* set up GPIO direction - all output */
1717 btwrite(ZR36057_SPGPPCR_SoftReset | 0, ZR36057_SPGPPCR);
1719 /* set up GPIO pins and guest bus timing */
1720 btwrite((0x81 << 24) | 0x8888, ZR36057_GPPGCR1);
1724 * initialize video front end
1728 zr36057_init_vfe (struct zoran *zr)
1732 reg = btread(ZR36057_VFESPFR);
1733 reg |= ZR36057_VFESPFR_LittleEndian;
1734 reg &= ~ZR36057_VFESPFR_VCLKPol;
1735 reg |= ZR36057_VFESPFR_ExtFl;
1736 reg |= ZR36057_VFESPFR_TopField;
1737 btwrite(reg, ZR36057_VFESPFR);
1738 reg = btread(ZR36057_VDCR);
1739 if (pci_pci_problems & PCIPCI_TRITON)
1740 // || zr->revision < 1) // Revision 1 has also Triton support
1741 reg &= ~ZR36057_VDCR_Triton;
1743 reg |= ZR36057_VDCR_Triton;
1744 btwrite(reg, ZR36057_VDCR);
1748 * Interface to decoder and encoder chips using i2c bus
1752 decoder_command (struct zoran *zr,
1756 if (zr->decoder == NULL)
1759 if (zr->card.type == LML33 &&
1760 (cmd == DECODER_SET_NORM || DECODER_SET_INPUT)) {
1763 // Bt819 needs to reset its FIFO buffer using #FRST pin and
1764 // LML33 card uses GPIO(7) for that.
1766 res = zr->decoder->driver->command(zr->decoder, cmd, data);
1771 return zr->decoder->driver->command(zr->decoder, cmd,
1776 encoder_command (struct zoran *zr,
1780 if (zr->encoder == NULL)
1783 return zr->encoder->driver->command(zr->encoder, cmd, data);