Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
[linux-2.6] / drivers / video / atmel_lcdfb.c
1 /*
2  *  Driver for AT91/AT32 LCD Controller
3  *
4  *  Copyright (C) 2007 Atmel Corporation
5  *
6  * This file is subject to the terms and conditions of the GNU General Public
7  * License.  See the file COPYING in the main directory of this archive for
8  * more details.
9  */
10
11 #include <linux/kernel.h>
12 #include <linux/platform_device.h>
13 #include <linux/dma-mapping.h>
14 #include <linux/interrupt.h>
15 #include <linux/clk.h>
16 #include <linux/fb.h>
17 #include <linux/init.h>
18 #include <linux/delay.h>
19 #include <linux/backlight.h>
20
21 #include <mach/board.h>
22 #include <mach/cpu.h>
23 #include <mach/gpio.h>
24
25 #include <video/atmel_lcdc.h>
26
27 #define lcdc_readl(sinfo, reg)          __raw_readl((sinfo)->mmio+(reg))
28 #define lcdc_writel(sinfo, reg, val)    __raw_writel((val), (sinfo)->mmio+(reg))
29
30 /* configurable parameters */
31 #define ATMEL_LCDC_CVAL_DEFAULT         0xc8
32 #define ATMEL_LCDC_DMA_BURST_LEN        8
33
34 #if defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91CAP9) || \
35         defined(CONFIG_ARCH_AT91SAM9RL)
36 #define ATMEL_LCDC_FIFO_SIZE            2048
37 #else
38 #define ATMEL_LCDC_FIFO_SIZE            512
39 #endif
40
41 #if defined(CONFIG_ARCH_AT91)
42 #define ATMEL_LCDFB_FBINFO_DEFAULT      (FBINFO_DEFAULT \
43                                          | FBINFO_PARTIAL_PAN_OK \
44                                          | FBINFO_HWACCEL_YPAN)
45
46 static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
47                                         struct fb_var_screeninfo *var)
48 {
49
50 }
51 #elif defined(CONFIG_AVR32)
52 #define ATMEL_LCDFB_FBINFO_DEFAULT      (FBINFO_DEFAULT \
53                                         | FBINFO_PARTIAL_PAN_OK \
54                                         | FBINFO_HWACCEL_XPAN \
55                                         | FBINFO_HWACCEL_YPAN)
56
57 static void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
58                                      struct fb_var_screeninfo *var)
59 {
60         u32 dma2dcfg;
61         u32 pixeloff;
62
63         pixeloff = (var->xoffset * var->bits_per_pixel) & 0x1f;
64
65         dma2dcfg = ((var->xres_virtual - var->xres) * var->bits_per_pixel) / 8;
66         dma2dcfg |= pixeloff << ATMEL_LCDC_PIXELOFF_OFFSET;
67         lcdc_writel(sinfo, ATMEL_LCDC_DMA2DCFG, dma2dcfg);
68
69         /* Update configuration */
70         lcdc_writel(sinfo, ATMEL_LCDC_DMACON,
71                     lcdc_readl(sinfo, ATMEL_LCDC_DMACON)
72                     | ATMEL_LCDC_DMAUPDT);
73 }
74 #endif
75
76 static const u32 contrast_ctr = ATMEL_LCDC_PS_DIV8
77                 | ATMEL_LCDC_POL_POSITIVE
78                 | ATMEL_LCDC_ENA_PWMENABLE;
79
80 #ifdef CONFIG_BACKLIGHT_ATMEL_LCDC
81
82 /* some bl->props field just changed */
83 static int atmel_bl_update_status(struct backlight_device *bl)
84 {
85         struct atmel_lcdfb_info *sinfo = bl_get_data(bl);
86         int                     power = sinfo->bl_power;
87         int                     brightness = bl->props.brightness;
88
89         /* REVISIT there may be a meaningful difference between
90          * fb_blank and power ... there seem to be some cases
91          * this doesn't handle correctly.
92          */
93         if (bl->props.fb_blank != sinfo->bl_power)
94                 power = bl->props.fb_blank;
95         else if (bl->props.power != sinfo->bl_power)
96                 power = bl->props.power;
97
98         if (brightness < 0 && power == FB_BLANK_UNBLANK)
99                 brightness = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
100         else if (power != FB_BLANK_UNBLANK)
101                 brightness = 0;
102
103         lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, brightness);
104         lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR,
105                         brightness ? contrast_ctr : 0);
106
107         bl->props.fb_blank = bl->props.power = sinfo->bl_power = power;
108
109         return 0;
110 }
111
112 static int atmel_bl_get_brightness(struct backlight_device *bl)
113 {
114         struct atmel_lcdfb_info *sinfo = bl_get_data(bl);
115
116         return lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
117 }
118
119 static struct backlight_ops atmel_lcdc_bl_ops = {
120         .update_status = atmel_bl_update_status,
121         .get_brightness = atmel_bl_get_brightness,
122 };
123
124 static void init_backlight(struct atmel_lcdfb_info *sinfo)
125 {
126         struct backlight_device *bl;
127
128         sinfo->bl_power = FB_BLANK_UNBLANK;
129
130         if (sinfo->backlight)
131                 return;
132
133         bl = backlight_device_register("backlight", &sinfo->pdev->dev,
134                         sinfo, &atmel_lcdc_bl_ops);
135         if (IS_ERR(sinfo->backlight)) {
136                 dev_err(&sinfo->pdev->dev, "error %ld on backlight register\n",
137                                 PTR_ERR(bl));
138                 return;
139         }
140         sinfo->backlight = bl;
141
142         bl->props.power = FB_BLANK_UNBLANK;
143         bl->props.fb_blank = FB_BLANK_UNBLANK;
144         bl->props.max_brightness = 0xff;
145         bl->props.brightness = atmel_bl_get_brightness(bl);
146 }
147
148 static void exit_backlight(struct atmel_lcdfb_info *sinfo)
149 {
150         if (sinfo->backlight)
151                 backlight_device_unregister(sinfo->backlight);
152 }
153
154 #else
155
156 static void init_backlight(struct atmel_lcdfb_info *sinfo)
157 {
158         dev_warn(&sinfo->pdev->dev, "backlight control is not available\n");
159 }
160
161 static void exit_backlight(struct atmel_lcdfb_info *sinfo)
162 {
163 }
164
165 #endif
166
167 static void init_contrast(struct atmel_lcdfb_info *sinfo)
168 {
169         /* have some default contrast/backlight settings */
170         lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, contrast_ctr);
171         lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
172
173         if (sinfo->lcdcon_is_backlight)
174                 init_backlight(sinfo);
175 }
176
177
178 static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
179         .type           = FB_TYPE_PACKED_PIXELS,
180         .visual         = FB_VISUAL_TRUECOLOR,
181         .xpanstep       = 0,
182         .ypanstep       = 1,
183         .ywrapstep      = 0,
184         .accel          = FB_ACCEL_NONE,
185 };
186
187 static unsigned long compute_hozval(unsigned long xres, unsigned long lcdcon2)
188 {
189         unsigned long value;
190
191         if (!(cpu_is_at91sam9261() || cpu_is_at32ap7000()))
192                 return xres;
193
194         value = xres;
195         if ((lcdcon2 & ATMEL_LCDC_DISTYPE) != ATMEL_LCDC_DISTYPE_TFT) {
196                 /* STN display */
197                 if ((lcdcon2 & ATMEL_LCDC_DISTYPE) == ATMEL_LCDC_DISTYPE_STNCOLOR) {
198                         value *= 3;
199                 }
200                 if ( (lcdcon2 & ATMEL_LCDC_IFWIDTH) == ATMEL_LCDC_IFWIDTH_4
201                    || ( (lcdcon2 & ATMEL_LCDC_IFWIDTH) == ATMEL_LCDC_IFWIDTH_8
202                       && (lcdcon2 & ATMEL_LCDC_SCANMOD) == ATMEL_LCDC_SCANMOD_DUAL ))
203                         value = DIV_ROUND_UP(value, 4);
204                 else
205                         value = DIV_ROUND_UP(value, 8);
206         }
207
208         return value;
209 }
210
211 static void atmel_lcdfb_stop_nowait(struct atmel_lcdfb_info *sinfo)
212 {
213         /* Turn off the LCD controller and the DMA controller */
214         lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
215                         sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
216
217         /* Wait for the LCDC core to become idle */
218         while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
219                 msleep(10);
220
221         lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
222 }
223
224 static void atmel_lcdfb_stop(struct atmel_lcdfb_info *sinfo)
225 {
226         atmel_lcdfb_stop_nowait(sinfo);
227
228         /* Wait for DMA engine to become idle... */
229         while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
230                 msleep(10);
231 }
232
233 static void atmel_lcdfb_start(struct atmel_lcdfb_info *sinfo)
234 {
235         lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
236         lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
237                 (sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET)
238                 | ATMEL_LCDC_PWR);
239 }
240
241 static void atmel_lcdfb_update_dma(struct fb_info *info,
242                                struct fb_var_screeninfo *var)
243 {
244         struct atmel_lcdfb_info *sinfo = info->par;
245         struct fb_fix_screeninfo *fix = &info->fix;
246         unsigned long dma_addr;
247
248         dma_addr = (fix->smem_start + var->yoffset * fix->line_length
249                     + var->xoffset * var->bits_per_pixel / 8);
250
251         dma_addr &= ~3UL;
252
253         /* Set framebuffer DMA base address and pixel offset */
254         lcdc_writel(sinfo, ATMEL_LCDC_DMABADDR1, dma_addr);
255
256         atmel_lcdfb_update_dma2d(sinfo, var);
257 }
258
259 static inline void atmel_lcdfb_free_video_memory(struct atmel_lcdfb_info *sinfo)
260 {
261         struct fb_info *info = sinfo->info;
262
263         dma_free_writecombine(info->device, info->fix.smem_len,
264                                 info->screen_base, info->fix.smem_start);
265 }
266
267 /**
268  *      atmel_lcdfb_alloc_video_memory - Allocate framebuffer memory
269  *      @sinfo: the frame buffer to allocate memory for
270  */
271 static int atmel_lcdfb_alloc_video_memory(struct atmel_lcdfb_info *sinfo)
272 {
273         struct fb_info *info = sinfo->info;
274         struct fb_var_screeninfo *var = &info->var;
275         unsigned int smem_len;
276
277         smem_len = (var->xres_virtual * var->yres_virtual
278                     * ((var->bits_per_pixel + 7) / 8));
279         info->fix.smem_len = max(smem_len, sinfo->smem_len);
280
281         info->screen_base = dma_alloc_writecombine(info->device, info->fix.smem_len,
282                                         (dma_addr_t *)&info->fix.smem_start, GFP_KERNEL);
283
284         if (!info->screen_base) {
285                 return -ENOMEM;
286         }
287
288         memset(info->screen_base, 0, info->fix.smem_len);
289
290         return 0;
291 }
292
293 static const struct fb_videomode *atmel_lcdfb_choose_mode(struct fb_var_screeninfo *var,
294                                                      struct fb_info *info)
295 {
296         struct fb_videomode varfbmode;
297         const struct fb_videomode *fbmode = NULL;
298
299         fb_var_to_videomode(&varfbmode, var);
300         fbmode = fb_find_nearest_mode(&varfbmode, &info->modelist);
301         if (fbmode)
302                 fb_videomode_to_var(var, fbmode);
303         return fbmode;
304 }
305
306
307 /**
308  *      atmel_lcdfb_check_var - Validates a var passed in.
309  *      @var: frame buffer variable screen structure
310  *      @info: frame buffer structure that represents a single frame buffer
311  *
312  *      Checks to see if the hardware supports the state requested by
313  *      var passed in. This function does not alter the hardware
314  *      state!!!  This means the data stored in struct fb_info and
315  *      struct atmel_lcdfb_info do not change. This includes the var
316  *      inside of struct fb_info.  Do NOT change these. This function
317  *      can be called on its own if we intent to only test a mode and
318  *      not actually set it. The stuff in modedb.c is a example of
319  *      this. If the var passed in is slightly off by what the
320  *      hardware can support then we alter the var PASSED in to what
321  *      we can do. If the hardware doesn't support mode change a
322  *      -EINVAL will be returned by the upper layers. You don't need
323  *      to implement this function then. If you hardware doesn't
324  *      support changing the resolution then this function is not
325  *      needed. In this case the driver would just provide a var that
326  *      represents the static state the screen is in.
327  *
328  *      Returns negative errno on error, or zero on success.
329  */
330 static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
331                              struct fb_info *info)
332 {
333         struct device *dev = info->device;
334         struct atmel_lcdfb_info *sinfo = info->par;
335         unsigned long clk_value_khz;
336
337         clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
338
339         dev_dbg(dev, "%s:\n", __func__);
340
341         if (!(var->pixclock && var->bits_per_pixel)) {
342                 /* choose a suitable mode if possible */
343                 if (!atmel_lcdfb_choose_mode(var, info)) {
344                         dev_err(dev, "needed value not specified\n");
345                         return -EINVAL;
346                 }
347         }
348
349         dev_dbg(dev, "  resolution: %ux%u\n", var->xres, var->yres);
350         dev_dbg(dev, "  pixclk:     %lu KHz\n", PICOS2KHZ(var->pixclock));
351         dev_dbg(dev, "  bpp:        %u\n", var->bits_per_pixel);
352         dev_dbg(dev, "  clk:        %lu KHz\n", clk_value_khz);
353
354         if ((PICOS2KHZ(var->pixclock) * var->bits_per_pixel / 8) > clk_value_khz) {
355                 dev_err(dev, "%lu KHz pixel clock is too fast\n", PICOS2KHZ(var->pixclock));
356                 return -EINVAL;
357         }
358
359         /* Do not allow to have real resoulution larger than virtual */
360         if (var->xres > var->xres_virtual)
361                 var->xres_virtual = var->xres;
362
363         if (var->yres > var->yres_virtual)
364                 var->yres_virtual = var->yres;
365
366         /* Force same alignment for each line */
367         var->xres = (var->xres + 3) & ~3UL;
368         var->xres_virtual = (var->xres_virtual + 3) & ~3UL;
369
370         var->red.msb_right = var->green.msb_right = var->blue.msb_right = 0;
371         var->transp.msb_right = 0;
372         var->transp.offset = var->transp.length = 0;
373         var->xoffset = var->yoffset = 0;
374
375         /* Saturate vertical and horizontal timings at maximum values */
376         var->vsync_len = min_t(u32, var->vsync_len,
377                         (ATMEL_LCDC_VPW >> ATMEL_LCDC_VPW_OFFSET) + 1);
378         var->upper_margin = min_t(u32, var->upper_margin,
379                         ATMEL_LCDC_VBP >> ATMEL_LCDC_VBP_OFFSET);
380         var->lower_margin = min_t(u32, var->lower_margin,
381                         ATMEL_LCDC_VFP);
382         var->right_margin = min_t(u32, var->right_margin,
383                         (ATMEL_LCDC_HFP >> ATMEL_LCDC_HFP_OFFSET) + 1);
384         var->hsync_len = min_t(u32, var->hsync_len,
385                         (ATMEL_LCDC_HPW >> ATMEL_LCDC_HPW_OFFSET) + 1);
386         var->left_margin = min_t(u32, var->left_margin,
387                         ATMEL_LCDC_HBP + 1);
388
389         /* Some parameters can't be zero */
390         var->vsync_len = max_t(u32, var->vsync_len, 1);
391         var->right_margin = max_t(u32, var->right_margin, 1);
392         var->hsync_len = max_t(u32, var->hsync_len, 1);
393         var->left_margin = max_t(u32, var->left_margin, 1);
394
395         switch (var->bits_per_pixel) {
396         case 1:
397         case 2:
398         case 4:
399         case 8:
400                 var->red.offset = var->green.offset = var->blue.offset = 0;
401                 var->red.length = var->green.length = var->blue.length
402                         = var->bits_per_pixel;
403                 break;
404         case 15:
405         case 16:
406                 if (sinfo->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
407                         /* RGB:565 mode */
408                         var->red.offset = 11;
409                         var->blue.offset = 0;
410                         var->green.length = 6;
411                 } else {
412                         /* BGR:555 mode */
413                         var->red.offset = 0;
414                         var->blue.offset = 10;
415                         var->green.length = 5;
416                 }
417                 var->green.offset = 5;
418                 var->red.length = var->blue.length = 5;
419                 break;
420         case 32:
421                 var->transp.offset = 24;
422                 var->transp.length = 8;
423                 /* fall through */
424         case 24:
425                 if (sinfo->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
426                         /* RGB:888 mode */
427                         var->red.offset = 16;
428                         var->blue.offset = 0;
429                 } else {
430                         /* BGR:888 mode */
431                         var->red.offset = 0;
432                         var->blue.offset = 16;
433                 }
434                 var->green.offset = 8;
435                 var->red.length = var->green.length = var->blue.length = 8;
436                 break;
437         default:
438                 dev_err(dev, "color depth %d not supported\n",
439                                         var->bits_per_pixel);
440                 return -EINVAL;
441         }
442
443         return 0;
444 }
445
446 /*
447  * LCD reset sequence
448  */
449 static void atmel_lcdfb_reset(struct atmel_lcdfb_info *sinfo)
450 {
451         might_sleep();
452
453         atmel_lcdfb_stop(sinfo);
454         atmel_lcdfb_start(sinfo);
455 }
456
457 /**
458  *      atmel_lcdfb_set_par - Alters the hardware state.
459  *      @info: frame buffer structure that represents a single frame buffer
460  *
461  *      Using the fb_var_screeninfo in fb_info we set the resolution
462  *      of the this particular framebuffer. This function alters the
463  *      par AND the fb_fix_screeninfo stored in fb_info. It doesn't
464  *      not alter var in fb_info since we are using that data. This
465  *      means we depend on the data in var inside fb_info to be
466  *      supported by the hardware.  atmel_lcdfb_check_var is always called
467  *      before atmel_lcdfb_set_par to ensure this.  Again if you can't
468  *      change the resolution you don't need this function.
469  *
470  */
471 static int atmel_lcdfb_set_par(struct fb_info *info)
472 {
473         struct atmel_lcdfb_info *sinfo = info->par;
474         unsigned long hozval_linesz;
475         unsigned long value;
476         unsigned long clk_value_khz;
477         unsigned long bits_per_line;
478
479         might_sleep();
480
481         dev_dbg(info->device, "%s:\n", __func__);
482         dev_dbg(info->device, "  * resolution: %ux%u (%ux%u virtual)\n",
483                  info->var.xres, info->var.yres,
484                  info->var.xres_virtual, info->var.yres_virtual);
485
486         atmel_lcdfb_stop_nowait(sinfo);
487
488         if (info->var.bits_per_pixel == 1)
489                 info->fix.visual = FB_VISUAL_MONO01;
490         else if (info->var.bits_per_pixel <= 8)
491                 info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
492         else
493                 info->fix.visual = FB_VISUAL_TRUECOLOR;
494
495         bits_per_line = info->var.xres_virtual * info->var.bits_per_pixel;
496         info->fix.line_length = DIV_ROUND_UP(bits_per_line, 8);
497
498         /* Re-initialize the DMA engine... */
499         dev_dbg(info->device, "  * update DMA engine\n");
500         atmel_lcdfb_update_dma(info, &info->var);
501
502         /* ...set frame size and burst length = 8 words (?) */
503         value = (info->var.yres * info->var.xres * info->var.bits_per_pixel) / 32;
504         value |= ((ATMEL_LCDC_DMA_BURST_LEN - 1) << ATMEL_LCDC_BLENGTH_OFFSET);
505         lcdc_writel(sinfo, ATMEL_LCDC_DMAFRMCFG, value);
506
507         /* Now, the LCDC core... */
508
509         /* Set pixel clock */
510         clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
511
512         value = DIV_ROUND_UP(clk_value_khz, PICOS2KHZ(info->var.pixclock));
513
514         if (value < 2) {
515                 dev_notice(info->device, "Bypassing pixel clock divider\n");
516                 lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS);
517         } else {
518                 value = (value / 2) - 1;
519                 dev_dbg(info->device, "  * programming CLKVAL = 0x%08lx\n",
520                                 value);
521                 lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1,
522                                 value << ATMEL_LCDC_CLKVAL_OFFSET);
523                 info->var.pixclock = KHZ2PICOS(clk_value_khz / (2 * (value + 1)));
524                 dev_dbg(info->device, "  updated pixclk:     %lu KHz\n",
525                                         PICOS2KHZ(info->var.pixclock));
526         }
527
528
529         /* Initialize control register 2 */
530         value = sinfo->default_lcdcon2;
531
532         if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
533                 value |= ATMEL_LCDC_INVLINE_INVERTED;
534         if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
535                 value |= ATMEL_LCDC_INVFRAME_INVERTED;
536
537         switch (info->var.bits_per_pixel) {
538                 case 1: value |= ATMEL_LCDC_PIXELSIZE_1; break;
539                 case 2: value |= ATMEL_LCDC_PIXELSIZE_2; break;
540                 case 4: value |= ATMEL_LCDC_PIXELSIZE_4; break;
541                 case 8: value |= ATMEL_LCDC_PIXELSIZE_8; break;
542                 case 15: /* fall through */
543                 case 16: value |= ATMEL_LCDC_PIXELSIZE_16; break;
544                 case 24: value |= ATMEL_LCDC_PIXELSIZE_24; break;
545                 case 32: value |= ATMEL_LCDC_PIXELSIZE_32; break;
546                 default: BUG(); break;
547         }
548         dev_dbg(info->device, "  * LCDCON2 = %08lx\n", value);
549         lcdc_writel(sinfo, ATMEL_LCDC_LCDCON2, value);
550
551         /* Vertical timing */
552         value = (info->var.vsync_len - 1) << ATMEL_LCDC_VPW_OFFSET;
553         value |= info->var.upper_margin << ATMEL_LCDC_VBP_OFFSET;
554         value |= info->var.lower_margin;
555         dev_dbg(info->device, "  * LCDTIM1 = %08lx\n", value);
556         lcdc_writel(sinfo, ATMEL_LCDC_TIM1, value);
557
558         /* Horizontal timing */
559         value = (info->var.right_margin - 1) << ATMEL_LCDC_HFP_OFFSET;
560         value |= (info->var.hsync_len - 1) << ATMEL_LCDC_HPW_OFFSET;
561         value |= (info->var.left_margin - 1);
562         dev_dbg(info->device, "  * LCDTIM2 = %08lx\n", value);
563         lcdc_writel(sinfo, ATMEL_LCDC_TIM2, value);
564
565         /* Horizontal value (aka line size) */
566         hozval_linesz = compute_hozval(info->var.xres,
567                                         lcdc_readl(sinfo, ATMEL_LCDC_LCDCON2));
568
569         /* Display size */
570         value = (hozval_linesz - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
571         value |= info->var.yres - 1;
572         dev_dbg(info->device, "  * LCDFRMCFG = %08lx\n", value);
573         lcdc_writel(sinfo, ATMEL_LCDC_LCDFRMCFG, value);
574
575         /* FIFO Threshold: Use formula from data sheet */
576         value = ATMEL_LCDC_FIFO_SIZE - (2 * ATMEL_LCDC_DMA_BURST_LEN + 3);
577         lcdc_writel(sinfo, ATMEL_LCDC_FIFO, value);
578
579         /* Toggle LCD_MODE every frame */
580         lcdc_writel(sinfo, ATMEL_LCDC_MVAL, 0);
581
582         /* Disable all interrupts */
583         lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
584         /* Enable FIFO & DMA errors */
585         lcdc_writel(sinfo, ATMEL_LCDC_IER, ATMEL_LCDC_UFLWI | ATMEL_LCDC_OWRI | ATMEL_LCDC_MERI);
586
587         /* ...wait for DMA engine to become idle... */
588         while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
589                 msleep(10);
590
591         atmel_lcdfb_start(sinfo);
592
593         dev_dbg(info->device, "  * DONE\n");
594
595         return 0;
596 }
597
598 static inline unsigned int chan_to_field(unsigned int chan, const struct fb_bitfield *bf)
599 {
600         chan &= 0xffff;
601         chan >>= 16 - bf->length;
602         return chan << bf->offset;
603 }
604
605 /**
606  *      atmel_lcdfb_setcolreg - Optional function. Sets a color register.
607  *      @regno: Which register in the CLUT we are programming
608  *      @red: The red value which can be up to 16 bits wide
609  *      @green: The green value which can be up to 16 bits wide
610  *      @blue:  The blue value which can be up to 16 bits wide.
611  *      @transp: If supported the alpha value which can be up to 16 bits wide.
612  *      @info: frame buffer info structure
613  *
614  *      Set a single color register. The values supplied have a 16 bit
615  *      magnitude which needs to be scaled in this function for the hardware.
616  *      Things to take into consideration are how many color registers, if
617  *      any, are supported with the current color visual. With truecolor mode
618  *      no color palettes are supported. Here a psuedo palette is created
619  *      which we store the value in pseudo_palette in struct fb_info. For
620  *      pseudocolor mode we have a limited color palette. To deal with this
621  *      we can program what color is displayed for a particular pixel value.
622  *      DirectColor is similar in that we can program each color field. If
623  *      we have a static colormap we don't need to implement this function.
624  *
625  *      Returns negative errno on error, or zero on success. In an
626  *      ideal world, this would have been the case, but as it turns
627  *      out, the other drivers return 1 on failure, so that's what
628  *      we're going to do.
629  */
630 static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red,
631                              unsigned int green, unsigned int blue,
632                              unsigned int transp, struct fb_info *info)
633 {
634         struct atmel_lcdfb_info *sinfo = info->par;
635         unsigned int val;
636         u32 *pal;
637         int ret = 1;
638
639         if (info->var.grayscale)
640                 red = green = blue = (19595 * red + 38470 * green
641                                       + 7471 * blue) >> 16;
642
643         switch (info->fix.visual) {
644         case FB_VISUAL_TRUECOLOR:
645                 if (regno < 16) {
646                         pal = info->pseudo_palette;
647
648                         val  = chan_to_field(red, &info->var.red);
649                         val |= chan_to_field(green, &info->var.green);
650                         val |= chan_to_field(blue, &info->var.blue);
651
652                         pal[regno] = val;
653                         ret = 0;
654                 }
655                 break;
656
657         case FB_VISUAL_PSEUDOCOLOR:
658                 if (regno < 256) {
659                         val  = ((red   >> 11) & 0x001f);
660                         val |= ((green >>  6) & 0x03e0);
661                         val |= ((blue  >>  1) & 0x7c00);
662
663                         /*
664                          * TODO: intensity bit. Maybe something like
665                          *   ~(red[10] ^ green[10] ^ blue[10]) & 1
666                          */
667
668                         lcdc_writel(sinfo, ATMEL_LCDC_LUT(regno), val);
669                         ret = 0;
670                 }
671                 break;
672
673         case FB_VISUAL_MONO01:
674                 if (regno < 2) {
675                         val = (regno == 0) ? 0x00 : 0x1F;
676                         lcdc_writel(sinfo, ATMEL_LCDC_LUT(regno), val);
677                         ret = 0;
678                 }
679                 break;
680
681         }
682
683         return ret;
684 }
685
686 static int atmel_lcdfb_pan_display(struct fb_var_screeninfo *var,
687                                struct fb_info *info)
688 {
689         dev_dbg(info->device, "%s\n", __func__);
690
691         atmel_lcdfb_update_dma(info, var);
692
693         return 0;
694 }
695
696 static struct fb_ops atmel_lcdfb_ops = {
697         .owner          = THIS_MODULE,
698         .fb_check_var   = atmel_lcdfb_check_var,
699         .fb_set_par     = atmel_lcdfb_set_par,
700         .fb_setcolreg   = atmel_lcdfb_setcolreg,
701         .fb_pan_display = atmel_lcdfb_pan_display,
702         .fb_fillrect    = cfb_fillrect,
703         .fb_copyarea    = cfb_copyarea,
704         .fb_imageblit   = cfb_imageblit,
705 };
706
707 static irqreturn_t atmel_lcdfb_interrupt(int irq, void *dev_id)
708 {
709         struct fb_info *info = dev_id;
710         struct atmel_lcdfb_info *sinfo = info->par;
711         u32 status;
712
713         status = lcdc_readl(sinfo, ATMEL_LCDC_ISR);
714         if (status & ATMEL_LCDC_UFLWI) {
715                 dev_warn(info->device, "FIFO underflow %#x\n", status);
716                 /* reset DMA and FIFO to avoid screen shifting */
717                 schedule_work(&sinfo->task);
718         }
719         lcdc_writel(sinfo, ATMEL_LCDC_ICR, status);
720         return IRQ_HANDLED;
721 }
722
723 /*
724  * LCD controller task (to reset the LCD)
725  */
726 static void atmel_lcdfb_task(struct work_struct *work)
727 {
728         struct atmel_lcdfb_info *sinfo =
729                 container_of(work, struct atmel_lcdfb_info, task);
730
731         atmel_lcdfb_reset(sinfo);
732 }
733
734 static int __init atmel_lcdfb_init_fbinfo(struct atmel_lcdfb_info *sinfo)
735 {
736         struct fb_info *info = sinfo->info;
737         int ret = 0;
738
739         info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW;
740
741         dev_info(info->device,
742                "%luKiB frame buffer at %08lx (mapped at %p)\n",
743                (unsigned long)info->fix.smem_len / 1024,
744                (unsigned long)info->fix.smem_start,
745                info->screen_base);
746
747         /* Allocate colormap */
748         ret = fb_alloc_cmap(&info->cmap, 256, 0);
749         if (ret < 0)
750                 dev_err(info->device, "Alloc color map failed\n");
751
752         return ret;
753 }
754
755 static void atmel_lcdfb_start_clock(struct atmel_lcdfb_info *sinfo)
756 {
757         if (sinfo->bus_clk)
758                 clk_enable(sinfo->bus_clk);
759         clk_enable(sinfo->lcdc_clk);
760 }
761
762 static void atmel_lcdfb_stop_clock(struct atmel_lcdfb_info *sinfo)
763 {
764         if (sinfo->bus_clk)
765                 clk_disable(sinfo->bus_clk);
766         clk_disable(sinfo->lcdc_clk);
767 }
768
769
770 static int __init atmel_lcdfb_probe(struct platform_device *pdev)
771 {
772         struct device *dev = &pdev->dev;
773         struct fb_info *info;
774         struct atmel_lcdfb_info *sinfo;
775         struct atmel_lcdfb_info *pdata_sinfo;
776         struct fb_videomode fbmode;
777         struct resource *regs = NULL;
778         struct resource *map = NULL;
779         int ret;
780
781         dev_dbg(dev, "%s BEGIN\n", __func__);
782
783         ret = -ENOMEM;
784         info = framebuffer_alloc(sizeof(struct atmel_lcdfb_info), dev);
785         if (!info) {
786                 dev_err(dev, "cannot allocate memory\n");
787                 goto out;
788         }
789
790         sinfo = info->par;
791
792         if (dev->platform_data) {
793                 pdata_sinfo = (struct atmel_lcdfb_info *)dev->platform_data;
794                 sinfo->default_bpp = pdata_sinfo->default_bpp;
795                 sinfo->default_dmacon = pdata_sinfo->default_dmacon;
796                 sinfo->default_lcdcon2 = pdata_sinfo->default_lcdcon2;
797                 sinfo->default_monspecs = pdata_sinfo->default_monspecs;
798                 sinfo->atmel_lcdfb_power_control = pdata_sinfo->atmel_lcdfb_power_control;
799                 sinfo->guard_time = pdata_sinfo->guard_time;
800                 sinfo->smem_len = pdata_sinfo->smem_len;
801                 sinfo->lcdcon_is_backlight = pdata_sinfo->lcdcon_is_backlight;
802                 sinfo->lcd_wiring_mode = pdata_sinfo->lcd_wiring_mode;
803         } else {
804                 dev_err(dev, "cannot get default configuration\n");
805                 goto free_info;
806         }
807         sinfo->info = info;
808         sinfo->pdev = pdev;
809
810         strcpy(info->fix.id, sinfo->pdev->name);
811         info->flags = ATMEL_LCDFB_FBINFO_DEFAULT;
812         info->pseudo_palette = sinfo->pseudo_palette;
813         info->fbops = &atmel_lcdfb_ops;
814
815         memcpy(&info->monspecs, sinfo->default_monspecs, sizeof(info->monspecs));
816         info->fix = atmel_lcdfb_fix;
817
818         /* Enable LCDC Clocks */
819         if (cpu_is_at91sam9261() || cpu_is_at32ap7000()) {
820                 sinfo->bus_clk = clk_get(dev, "hck1");
821                 if (IS_ERR(sinfo->bus_clk)) {
822                         ret = PTR_ERR(sinfo->bus_clk);
823                         goto free_info;
824                 }
825         }
826         sinfo->lcdc_clk = clk_get(dev, "lcdc_clk");
827         if (IS_ERR(sinfo->lcdc_clk)) {
828                 ret = PTR_ERR(sinfo->lcdc_clk);
829                 goto put_bus_clk;
830         }
831         atmel_lcdfb_start_clock(sinfo);
832
833         ret = fb_find_mode(&info->var, info, NULL, info->monspecs.modedb,
834                         info->monspecs.modedb_len, info->monspecs.modedb,
835                         sinfo->default_bpp);
836         if (!ret) {
837                 dev_err(dev, "no suitable video mode found\n");
838                 goto stop_clk;
839         }
840
841
842         regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
843         if (!regs) {
844                 dev_err(dev, "resources unusable\n");
845                 ret = -ENXIO;
846                 goto stop_clk;
847         }
848
849         sinfo->irq_base = platform_get_irq(pdev, 0);
850         if (sinfo->irq_base < 0) {
851                 dev_err(dev, "unable to get irq\n");
852                 ret = sinfo->irq_base;
853                 goto stop_clk;
854         }
855
856         /* Initialize video memory */
857         map = platform_get_resource(pdev, IORESOURCE_MEM, 1);
858         if (map) {
859                 /* use a pre-allocated memory buffer */
860                 info->fix.smem_start = map->start;
861                 info->fix.smem_len = map->end - map->start + 1;
862                 if (!request_mem_region(info->fix.smem_start,
863                                         info->fix.smem_len, pdev->name)) {
864                         ret = -EBUSY;
865                         goto stop_clk;
866                 }
867
868                 info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len);
869                 if (!info->screen_base)
870                         goto release_intmem;
871
872                 /*
873                  * Don't clear the framebuffer -- someone may have set
874                  * up a splash image.
875                  */
876         } else {
877                 /* alocate memory buffer */
878                 ret = atmel_lcdfb_alloc_video_memory(sinfo);
879                 if (ret < 0) {
880                         dev_err(dev, "cannot allocate framebuffer: %d\n", ret);
881                         goto stop_clk;
882                 }
883         }
884
885         /* LCDC registers */
886         info->fix.mmio_start = regs->start;
887         info->fix.mmio_len = regs->end - regs->start + 1;
888
889         if (!request_mem_region(info->fix.mmio_start,
890                                 info->fix.mmio_len, pdev->name)) {
891                 ret = -EBUSY;
892                 goto free_fb;
893         }
894
895         sinfo->mmio = ioremap(info->fix.mmio_start, info->fix.mmio_len);
896         if (!sinfo->mmio) {
897                 dev_err(dev, "cannot map LCDC registers\n");
898                 goto release_mem;
899         }
900
901         /* Initialize PWM for contrast or backlight ("off") */
902         init_contrast(sinfo);
903
904         /* interrupt */
905         ret = request_irq(sinfo->irq_base, atmel_lcdfb_interrupt, 0, pdev->name, info);
906         if (ret) {
907                 dev_err(dev, "request_irq failed: %d\n", ret);
908                 goto unmap_mmio;
909         }
910
911         /* Some operations on the LCDC might sleep and
912          * require a preemptible task context */
913         INIT_WORK(&sinfo->task, atmel_lcdfb_task);
914
915         ret = atmel_lcdfb_init_fbinfo(sinfo);
916         if (ret < 0) {
917                 dev_err(dev, "init fbinfo failed: %d\n", ret);
918                 goto unregister_irqs;
919         }
920
921         /*
922          * This makes sure that our colour bitfield
923          * descriptors are correctly initialised.
924          */
925         atmel_lcdfb_check_var(&info->var, info);
926
927         ret = fb_set_var(info, &info->var);
928         if (ret) {
929                 dev_warn(dev, "unable to set display parameters\n");
930                 goto free_cmap;
931         }
932
933         dev_set_drvdata(dev, info);
934
935         /*
936          * Tell the world that we're ready to go
937          */
938         ret = register_framebuffer(info);
939         if (ret < 0) {
940                 dev_err(dev, "failed to register framebuffer device: %d\n", ret);
941                 goto reset_drvdata;
942         }
943
944         /* add selected videomode to modelist */
945         fb_var_to_videomode(&fbmode, &info->var);
946         fb_add_videomode(&fbmode, &info->modelist);
947
948         /* Power up the LCDC screen */
949         if (sinfo->atmel_lcdfb_power_control)
950                 sinfo->atmel_lcdfb_power_control(1);
951
952         dev_info(dev, "fb%d: Atmel LCDC at 0x%08lx (mapped at %p), irq %lu\n",
953                        info->node, info->fix.mmio_start, sinfo->mmio, sinfo->irq_base);
954
955         return 0;
956
957 reset_drvdata:
958         dev_set_drvdata(dev, NULL);
959 free_cmap:
960         fb_dealloc_cmap(&info->cmap);
961 unregister_irqs:
962         cancel_work_sync(&sinfo->task);
963         free_irq(sinfo->irq_base, info);
964 unmap_mmio:
965         exit_backlight(sinfo);
966         iounmap(sinfo->mmio);
967 release_mem:
968         release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
969 free_fb:
970         if (map)
971                 iounmap(info->screen_base);
972         else
973                 atmel_lcdfb_free_video_memory(sinfo);
974
975 release_intmem:
976         if (map)
977                 release_mem_region(info->fix.smem_start, info->fix.smem_len);
978 stop_clk:
979         atmel_lcdfb_stop_clock(sinfo);
980         clk_put(sinfo->lcdc_clk);
981 put_bus_clk:
982         if (sinfo->bus_clk)
983                 clk_put(sinfo->bus_clk);
984 free_info:
985         framebuffer_release(info);
986 out:
987         dev_dbg(dev, "%s FAILED\n", __func__);
988         return ret;
989 }
990
991 static int __exit atmel_lcdfb_remove(struct platform_device *pdev)
992 {
993         struct device *dev = &pdev->dev;
994         struct fb_info *info = dev_get_drvdata(dev);
995         struct atmel_lcdfb_info *sinfo;
996
997         if (!info || !info->par)
998                 return 0;
999         sinfo = info->par;
1000
1001         cancel_work_sync(&sinfo->task);
1002         exit_backlight(sinfo);
1003         if (sinfo->atmel_lcdfb_power_control)
1004                 sinfo->atmel_lcdfb_power_control(0);
1005         unregister_framebuffer(info);
1006         atmel_lcdfb_stop_clock(sinfo);
1007         clk_put(sinfo->lcdc_clk);
1008         if (sinfo->bus_clk)
1009                 clk_put(sinfo->bus_clk);
1010         fb_dealloc_cmap(&info->cmap);
1011         free_irq(sinfo->irq_base, info);
1012         iounmap(sinfo->mmio);
1013         release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
1014         if (platform_get_resource(pdev, IORESOURCE_MEM, 1)) {
1015                 iounmap(info->screen_base);
1016                 release_mem_region(info->fix.smem_start, info->fix.smem_len);
1017         } else {
1018                 atmel_lcdfb_free_video_memory(sinfo);
1019         }
1020
1021         dev_set_drvdata(dev, NULL);
1022         framebuffer_release(info);
1023
1024         return 0;
1025 }
1026
1027 #ifdef CONFIG_PM
1028
1029 static int atmel_lcdfb_suspend(struct platform_device *pdev, pm_message_t mesg)
1030 {
1031         struct fb_info *info = platform_get_drvdata(pdev);
1032         struct atmel_lcdfb_info *sinfo = info->par;
1033
1034         /*
1035          * We don't want to handle interrupts while the clock is
1036          * stopped. It may take forever.
1037          */
1038         lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
1039
1040         sinfo->saved_lcdcon = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
1041         lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, 0);
1042         if (sinfo->atmel_lcdfb_power_control)
1043                 sinfo->atmel_lcdfb_power_control(0);
1044
1045         atmel_lcdfb_stop(sinfo);
1046         atmel_lcdfb_stop_clock(sinfo);
1047
1048         return 0;
1049 }
1050
1051 static int atmel_lcdfb_resume(struct platform_device *pdev)
1052 {
1053         struct fb_info *info = platform_get_drvdata(pdev);
1054         struct atmel_lcdfb_info *sinfo = info->par;
1055
1056         atmel_lcdfb_start_clock(sinfo);
1057         atmel_lcdfb_start(sinfo);
1058         if (sinfo->atmel_lcdfb_power_control)
1059                 sinfo->atmel_lcdfb_power_control(1);
1060         lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, sinfo->saved_lcdcon);
1061
1062         /* Enable FIFO & DMA errors */
1063         lcdc_writel(sinfo, ATMEL_LCDC_IER, ATMEL_LCDC_UFLWI
1064                         | ATMEL_LCDC_OWRI | ATMEL_LCDC_MERI);
1065
1066         return 0;
1067 }
1068
1069 #else
1070 #define atmel_lcdfb_suspend     NULL
1071 #define atmel_lcdfb_resume      NULL
1072 #endif
1073
1074 static struct platform_driver atmel_lcdfb_driver = {
1075         .remove         = __exit_p(atmel_lcdfb_remove),
1076         .suspend        = atmel_lcdfb_suspend,
1077         .resume         = atmel_lcdfb_resume,
1078
1079         .driver         = {
1080                 .name   = "atmel_lcdfb",
1081                 .owner  = THIS_MODULE,
1082         },
1083 };
1084
1085 static int __init atmel_lcdfb_init(void)
1086 {
1087         return platform_driver_probe(&atmel_lcdfb_driver, atmel_lcdfb_probe);
1088 }
1089
1090 static void __exit atmel_lcdfb_exit(void)
1091 {
1092         platform_driver_unregister(&atmel_lcdfb_driver);
1093 }
1094
1095 module_init(atmel_lcdfb_init);
1096 module_exit(atmel_lcdfb_exit);
1097
1098 MODULE_DESCRIPTION("AT91/AT32 LCD Controller framebuffer driver");
1099 MODULE_AUTHOR("Nicolas Ferre <nicolas.ferre@atmel.com>");
1100 MODULE_LICENSE("GPL");