Merge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6
[linux-2.6] / drivers / usb / serial / cypress_m8.c
1 /*
2  * USB Cypress M8 driver
3  *
4  *      Copyright (C) 2004
5  *          Lonnie Mendez (dignome@gmail.com) 
6  *      Copyright (C) 2003,2004
7  *          Neil Whelchel (koyama@firstlight.net)
8  *
9  *      This program is free software; you can redistribute it and/or modify
10  *      it under the terms of the GNU General Public License as published by
11  *      the Free Software Foundation; either version 2 of the License, or
12  *      (at your option) any later version.
13  *
14  * See Documentation/usb/usb-serial.txt for more information on using this driver
15  *
16  * See http://geocities.com/i0xox0i for information on this driver and the
17  * earthmate usb device.
18  *
19  *  Lonnie Mendez <dignome@gmail.com>
20  *  4-29-2005
21  *      Fixed problem where setting or retreiving the serial config would fail with
22  *      EPIPE.  Removed CRTS toggling so the driver behaves more like other usbserial
23  *      adapters.  Issued new interval of 1ms instead of the default 10ms.  As a
24  *      result, transfer speed has been substantially increased.  From avg. 850bps to
25  *      avg. 3300bps.  initial termios has also been modified.  Cleaned up code and
26  *      formatting issues so it is more readable.  Replaced the C++ style comments.
27  *
28  *  Lonnie Mendez <dignome@gmail.com>
29  *  12-15-2004
30  *      Incorporated write buffering from pl2303 driver.  Fixed bug with line
31  *      handling so both lines are raised in cypress_open. (was dropping rts)
32  *      Various code cleanups made as well along with other misc bug fixes.
33  *
34  *  Lonnie Mendez <dignome@gmail.com>
35  *  04-10-2004
36  *      Driver modified to support dynamic line settings.  Various improvments
37  *      and features.
38  *
39  *  Neil Whelchel
40  *  10-2003
41  *      Driver first released.
42  *
43  */
44
45 /* Thanks to Neil Whelchel for writing the first cypress m8 implementation for linux. */
46 /* Thanks to cypress for providing references for the hid reports. */
47 /* Thanks to Jiang Zhang for providing links and for general help. */
48 /* Code originates and was built up from ftdi_sio, belkin, pl2303 and others. */
49
50
51 #include <linux/kernel.h>
52 #include <linux/errno.h>
53 #include <linux/init.h>
54 #include <linux/slab.h>
55 #include <linux/tty.h>
56 #include <linux/tty_driver.h>
57 #include <linux/tty_flip.h>
58 #include <linux/module.h>
59 #include <linux/moduleparam.h>
60 #include <linux/spinlock.h>
61 #include <linux/usb.h>
62 #include <linux/usb/serial.h>
63 #include <linux/serial.h>
64 #include <linux/delay.h>
65 #include <asm/uaccess.h>
66
67 #include "cypress_m8.h"
68
69
70 #ifdef CONFIG_USB_SERIAL_DEBUG
71         static int debug = 1;
72 #else
73         static int debug;
74 #endif
75 static int stats;
76 static int interval;
77
78 /*
79  * Version Information
80  */
81 #define DRIVER_VERSION "v1.09"
82 #define DRIVER_AUTHOR "Lonnie Mendez <dignome@gmail.com>, Neil Whelchel <koyama@firstlight.net>"
83 #define DRIVER_DESC "Cypress USB to Serial Driver"
84
85 /* write buffer size defines */
86 #define CYPRESS_BUF_SIZE        1024
87 #define CYPRESS_CLOSING_WAIT    (30*HZ)
88
89 static struct usb_device_id id_table_earthmate [] = {
90         { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
91         { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
92         { }                                             /* Terminating entry */
93 };
94
95 static struct usb_device_id id_table_cyphidcomrs232 [] = {
96         { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
97         { }                                             /* Terminating entry */
98 };
99
100 static struct usb_device_id id_table_nokiaca42v2 [] = {
101         { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
102         { }                                             /* Terminating entry */
103 };
104
105 static struct usb_device_id id_table_combined [] = {
106         { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
107         { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
108         { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
109         { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
110         { }                                             /* Terminating entry */
111 };
112
113 MODULE_DEVICE_TABLE (usb, id_table_combined);
114
115 static struct usb_driver cypress_driver = {
116         .name =         "cypress",
117         .probe =        usb_serial_probe,
118         .disconnect =   usb_serial_disconnect,
119         .id_table =     id_table_combined,
120         .no_dynamic_id =        1,
121 };
122
123 struct cypress_private {
124         spinlock_t lock;                   /* private lock */
125         int chiptype;                      /* identifier of device, for quirks/etc */
126         int bytes_in;                      /* used for statistics */
127         int bytes_out;                     /* used for statistics */
128         int cmd_count;                     /* used for statistics */
129         int cmd_ctrl;                      /* always set this to 1 before issuing a command */
130         struct cypress_buf *buf;           /* write buffer */
131         int write_urb_in_use;              /* write urb in use indicator */
132         int write_urb_interval;            /* interval to use for write urb */
133         int read_urb_interval;             /* interval to use for read urb */
134         int comm_is_ok;                    /* true if communication is (still) ok */
135         int termios_initialized;
136         __u8 line_control;                 /* holds dtr / rts value */
137         __u8 current_status;               /* received from last read - info on dsr,cts,cd,ri,etc */
138         __u8 current_config;               /* stores the current configuration byte */
139         __u8 rx_flags;                     /* throttling - used from whiteheat/ftdi_sio */
140         int baud_rate;                     /* stores current baud rate in integer form */
141         int cbr_mask;                      /* stores current baud rate in masked form */
142         int isthrottled;                   /* if throttled, discard reads */
143         wait_queue_head_t delta_msr_wait;  /* used for TIOCMIWAIT */
144         char prev_status, diff_status;     /* used for TIOCMIWAIT */
145         /* we pass a pointer to this as the arguement sent to cypress_set_termios old_termios */
146         struct ktermios tmp_termios;       /* stores the old termios settings */
147 };
148
149 /* write buffer structure */
150 struct cypress_buf {
151         unsigned int    buf_size;
152         char            *buf_buf;
153         char            *buf_get;
154         char            *buf_put;
155 };
156
157 /* function prototypes for the Cypress USB to serial device */
158 static int  cypress_earthmate_startup   (struct usb_serial *serial);
159 static int  cypress_hidcom_startup      (struct usb_serial *serial);
160 static int  cypress_ca42v2_startup      (struct usb_serial *serial);
161 static void cypress_shutdown            (struct usb_serial *serial);
162 static int  cypress_open                (struct usb_serial_port *port, struct file *filp);
163 static void cypress_close               (struct usb_serial_port *port, struct file *filp);
164 static int  cypress_write               (struct usb_serial_port *port, const unsigned char *buf, int count);
165 static void cypress_send                (struct usb_serial_port *port);
166 static int  cypress_write_room          (struct usb_serial_port *port);
167 static int  cypress_ioctl               (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
168 static void cypress_set_termios         (struct usb_serial_port *port, struct ktermios * old);
169 static int  cypress_tiocmget            (struct usb_serial_port *port, struct file *file);
170 static int  cypress_tiocmset            (struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear);
171 static int  cypress_chars_in_buffer     (struct usb_serial_port *port);
172 static void cypress_throttle            (struct usb_serial_port *port);
173 static void cypress_unthrottle          (struct usb_serial_port *port);
174 static void cypress_set_dead            (struct usb_serial_port *port);
175 static void cypress_read_int_callback   (struct urb *urb);
176 static void cypress_write_int_callback  (struct urb *urb);
177 /* baud helper functions */
178 static int       mask_to_rate           (unsigned mask);
179 static unsigned  rate_to_mask           (int rate);
180 /* write buffer functions */
181 static struct cypress_buf *cypress_buf_alloc(unsigned int size);
182 static void               cypress_buf_free(struct cypress_buf *cb);
183 static void               cypress_buf_clear(struct cypress_buf *cb);
184 static unsigned int       cypress_buf_data_avail(struct cypress_buf *cb);
185 static unsigned int       cypress_buf_space_avail(struct cypress_buf *cb);
186 static unsigned int       cypress_buf_put(struct cypress_buf *cb, const char *buf, unsigned int count);
187 static unsigned int       cypress_buf_get(struct cypress_buf *cb, char *buf, unsigned int count);
188
189
190 static struct usb_serial_driver cypress_earthmate_device = {
191         .driver = {
192                 .owner =                THIS_MODULE,
193                 .name =                 "earthmate",
194         },
195         .description =                  "DeLorme Earthmate USB",
196         .usb_driver =                   &cypress_driver,
197         .id_table =                     id_table_earthmate,
198         .num_interrupt_in =             1,
199         .num_interrupt_out =            1,
200         .num_bulk_in =                  NUM_DONT_CARE,
201         .num_bulk_out =                 NUM_DONT_CARE,
202         .num_ports =                    1,
203         .attach =                       cypress_earthmate_startup,
204         .shutdown =                     cypress_shutdown,
205         .open =                         cypress_open,
206         .close =                        cypress_close,
207         .write =                        cypress_write,
208         .write_room =                   cypress_write_room,
209         .ioctl =                        cypress_ioctl,
210         .set_termios =                  cypress_set_termios,
211         .tiocmget =                     cypress_tiocmget,
212         .tiocmset =                     cypress_tiocmset,
213         .chars_in_buffer =              cypress_chars_in_buffer,
214         .throttle =                     cypress_throttle,
215         .unthrottle =                   cypress_unthrottle,
216         .read_int_callback =            cypress_read_int_callback,
217         .write_int_callback =           cypress_write_int_callback,
218 };
219
220 static struct usb_serial_driver cypress_hidcom_device = {
221         .driver = {
222                 .owner =                THIS_MODULE,
223                 .name =                 "cyphidcom",
224         },
225         .description =                  "HID->COM RS232 Adapter",
226         .usb_driver =                   &cypress_driver,
227         .id_table =                     id_table_cyphidcomrs232,
228         .num_interrupt_in =             1,
229         .num_interrupt_out =            1,
230         .num_bulk_in =                  NUM_DONT_CARE,
231         .num_bulk_out =                 NUM_DONT_CARE,
232         .num_ports =                    1,
233         .attach =                       cypress_hidcom_startup,
234         .shutdown =                     cypress_shutdown,
235         .open =                         cypress_open,
236         .close =                        cypress_close,
237         .write =                        cypress_write,
238         .write_room =                   cypress_write_room,
239         .ioctl =                        cypress_ioctl,
240         .set_termios =                  cypress_set_termios,
241         .tiocmget =                     cypress_tiocmget,
242         .tiocmset =                     cypress_tiocmset,
243         .chars_in_buffer =              cypress_chars_in_buffer,
244         .throttle =                     cypress_throttle,
245         .unthrottle =                   cypress_unthrottle,
246         .read_int_callback =            cypress_read_int_callback,
247         .write_int_callback =           cypress_write_int_callback,
248 };
249
250 static struct usb_serial_driver cypress_ca42v2_device = {
251         .driver = {
252                 .owner =                THIS_MODULE,
253                 .name =                 "nokiaca42v2",
254         },
255         .description =                  "Nokia CA-42 V2 Adapter",
256         .usb_driver =                   &cypress_driver,
257         .id_table =                     id_table_nokiaca42v2,
258         .num_interrupt_in =             1,
259         .num_interrupt_out =            1,
260         .num_bulk_in =                  NUM_DONT_CARE,
261         .num_bulk_out =                 NUM_DONT_CARE,
262         .num_ports =                    1,
263         .attach =                       cypress_ca42v2_startup,
264         .shutdown =                     cypress_shutdown,
265         .open =                         cypress_open,
266         .close =                        cypress_close,
267         .write =                        cypress_write,
268         .write_room =                   cypress_write_room,
269         .ioctl =                        cypress_ioctl,
270         .set_termios =                  cypress_set_termios,
271         .tiocmget =                     cypress_tiocmget,
272         .tiocmset =                     cypress_tiocmset,
273         .chars_in_buffer =              cypress_chars_in_buffer,
274         .throttle =                     cypress_throttle,
275         .unthrottle =                   cypress_unthrottle,
276         .read_int_callback =            cypress_read_int_callback,
277         .write_int_callback =           cypress_write_int_callback,
278 };
279
280 /*****************************************************************************
281  * Cypress serial helper functions
282  *****************************************************************************/
283
284
285 /* This function can either set or retrieve the current serial line settings */
286 static int cypress_serial_control (struct usb_serial_port *port, unsigned baud_mask, int data_bits, int stop_bits,
287                                    int parity_enable, int parity_type, int reset, int cypress_request_type)
288 {
289         int new_baudrate = 0, retval = 0, tries = 0;
290         struct cypress_private *priv;
291         __u8 feature_buffer[8];
292         unsigned long flags;
293
294         dbg("%s", __FUNCTION__);
295         
296         priv = usb_get_serial_port_data(port);
297
298         if (!priv->comm_is_ok)
299                 return -ENODEV;
300
301         switch(cypress_request_type) {
302                 case CYPRESS_SET_CONFIG:
303
304                         /*
305                          * The general purpose firmware for the Cypress M8 allows for a maximum speed
306                          * of 57600bps (I have no idea whether DeLorme chose to use the general purpose
307                          * firmware or not), if you need to modify this speed setting for your own
308                          * project please add your own chiptype and modify the code likewise.  The
309                          * Cypress HID->COM device will work successfully up to 115200bps (but the
310                          * actual throughput is around 3kBps).
311                          */
312                         if (baud_mask != priv->cbr_mask) {
313                                 dbg("%s - baud rate is changing", __FUNCTION__);
314                                 if ( priv->chiptype == CT_EARTHMATE ) {
315                                         /* 300 and 600 baud rates are supported under the generic firmware,
316                                          * but are not used with NMEA and SiRF protocols */
317                                         
318                                         if ( (baud_mask == B300) || (baud_mask == B600) ) {
319                                                 err("%s - failed setting baud rate, unsupported speed",
320                                                     __FUNCTION__);
321                                                 new_baudrate = priv->baud_rate;
322                                         } else if ( (new_baudrate = mask_to_rate(baud_mask)) == -1) {
323                                                 err("%s - failed setting baud rate, unsupported speed",
324                                                     __FUNCTION__);
325                                                 new_baudrate = priv->baud_rate;
326                                         }
327                                 } else if (priv->chiptype == CT_CYPHIDCOM) {
328                                         if ( (new_baudrate = mask_to_rate(baud_mask)) == -1) {
329                                                 err("%s - failed setting baud rate, unsupported speed",
330                                                     __FUNCTION__);
331                                                 new_baudrate = priv->baud_rate;
332                                         }
333                                 } else if (priv->chiptype == CT_CA42V2) {
334                                         if ( (new_baudrate = mask_to_rate(baud_mask)) == -1) {
335                                                 err("%s - failed setting baud rate, unsupported speed",
336                                                     __FUNCTION__);
337                                                 new_baudrate = priv->baud_rate;
338                                         }
339                                 } else if (priv->chiptype == CT_GENERIC) {
340                                         if ( (new_baudrate = mask_to_rate(baud_mask)) == -1) {
341                                                 err("%s - failed setting baud rate, unsupported speed",
342                                                     __FUNCTION__);
343                                                 new_baudrate = priv->baud_rate;
344                                         }
345                                 } else {
346                                         info("%s - please define your chiptype", __FUNCTION__);
347                                         new_baudrate = priv->baud_rate;
348                                 }
349                         } else {  /* baud rate not changing, keep the old */
350                                 new_baudrate = priv->baud_rate;
351                         }
352                         dbg("%s - baud rate is being sent as %d", __FUNCTION__, new_baudrate);
353                         
354                         memset(feature_buffer, 0, 8);
355                         /* fill the feature_buffer with new configuration */
356                         *((u_int32_t *)feature_buffer) = new_baudrate;
357
358                         feature_buffer[4] |= data_bits;   /* assign data bits in 2 bit space ( max 3 ) */
359                         /* 1 bit gap */
360                         feature_buffer[4] |= (stop_bits << 3);   /* assign stop bits in 1 bit space */
361                         feature_buffer[4] |= (parity_enable << 4);   /* assign parity flag in 1 bit space */
362                         feature_buffer[4] |= (parity_type << 5);   /* assign parity type in 1 bit space */
363                         /* 1 bit gap */
364                         feature_buffer[4] |= (reset << 7);   /* assign reset at end of byte, 1 bit space */
365                                 
366                         dbg("%s - device is being sent this feature report:", __FUNCTION__);
367                         dbg("%s - %02X - %02X - %02X - %02X - %02X", __FUNCTION__, feature_buffer[0], feature_buffer[1],
368                             feature_buffer[2], feature_buffer[3], feature_buffer[4]);
369                         
370                         do {
371                         retval = usb_control_msg (port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0),
372                                                   HID_REQ_SET_REPORT, USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
373                                                           0x0300, 0, feature_buffer, 8, 500);
374
375                                 if (tries++ >= 3)
376                                         break;
377
378                         } while (retval != 8 && retval != -ENODEV);
379
380                         if (retval != 8) {
381                                 err("%s - failed sending serial line settings - %d", __FUNCTION__, retval);
382                                 cypress_set_dead(port);
383                         } else {
384                                 spin_lock_irqsave(&priv->lock, flags);
385                                 priv->baud_rate = new_baudrate;
386                                 priv->cbr_mask = baud_mask;
387                                 priv->current_config = feature_buffer[4];
388                                 spin_unlock_irqrestore(&priv->lock, flags);
389                         }
390                 break;
391                 case CYPRESS_GET_CONFIG:
392                         dbg("%s - retreiving serial line settings", __FUNCTION__);
393                         /* set initial values in feature buffer */
394                         memset(feature_buffer, 0, 8);
395
396                         do {
397                         retval = usb_control_msg (port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0),
398                                                   HID_REQ_GET_REPORT, USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
399                                                           0x0300, 0, feature_buffer, 8, 500);
400                                 
401                                 if (tries++ >= 3)
402                                         break;
403
404                         } while (retval != 5 && retval != -ENODEV);
405
406                         if (retval != 5) {
407                                 err("%s - failed to retrieve serial line settings - %d", __FUNCTION__, retval);
408                                 cypress_set_dead(port);
409                                 return retval;
410                         } else {
411                                 spin_lock_irqsave(&priv->lock, flags);
412
413                                 /* store the config in one byte, and later use bit masks to check values */
414                                 priv->current_config = feature_buffer[4];
415                                 priv->baud_rate = *((u_int32_t *)feature_buffer);
416                                 
417                                 if ( (priv->cbr_mask = rate_to_mask(priv->baud_rate)) == 0x40)
418                                         dbg("%s - failed setting the baud mask (not defined)", __FUNCTION__);
419                                 spin_unlock_irqrestore(&priv->lock, flags);
420                         }
421         }
422         spin_lock_irqsave(&priv->lock, flags);
423         ++priv->cmd_count;
424         spin_unlock_irqrestore(&priv->lock, flags);
425
426         return retval;
427 } /* cypress_serial_control */
428
429
430 static void cypress_set_dead(struct usb_serial_port *port)
431 {
432         struct cypress_private *priv = usb_get_serial_port_data(port);
433         unsigned long flags;
434
435         spin_lock_irqsave(&priv->lock, flags);
436         if (!priv->comm_is_ok) {
437                 spin_unlock_irqrestore(&priv->lock, flags);
438                 return;
439         }
440         priv->comm_is_ok = 0;
441         spin_unlock_irqrestore(&priv->lock, flags);
442
443         err("cypress_m8 suspending failing port %d - interval might be too short",
444             port->number);
445 }
446
447
448 /* given a baud mask, it will return integer baud on success */
449 static int mask_to_rate (unsigned mask)
450 {
451         int rate;
452
453         switch (mask) {
454                 case B0: rate = 0; break;
455                 case B300: rate = 300; break;
456                 case B600: rate = 600; break;
457                 case B1200: rate = 1200; break;
458                 case B2400: rate = 2400; break;
459                 case B4800: rate = 4800; break;
460                 case B9600: rate = 9600; break;
461                 case B19200: rate = 19200; break;
462                 case B38400: rate = 38400; break;
463                 case B57600: rate = 57600; break;
464                 case B115200: rate = 115200; break;
465                 default: rate = -1;
466         }
467
468         return rate;
469 }
470
471
472 static unsigned rate_to_mask (int rate)
473 {
474         unsigned mask;
475
476         switch (rate) {
477                 case 0: mask = B0; break;
478                 case 300: mask = B300; break;
479                 case 600: mask = B600; break;
480                 case 1200: mask = B1200; break;
481                 case 2400: mask = B2400; break;
482                 case 4800: mask = B4800; break;
483                 case 9600: mask = B9600; break;
484                 case 19200: mask = B19200; break;
485                 case 38400: mask = B38400; break;
486                 case 57600: mask = B57600; break;
487                 case 115200: mask = B115200; break;
488                 default: mask = 0x40;
489         }
490
491         return mask;
492 }
493 /*****************************************************************************
494  * Cypress serial driver functions
495  *****************************************************************************/
496
497
498 static int generic_startup (struct usb_serial *serial)
499 {
500         struct cypress_private *priv;
501         struct usb_serial_port *port = serial->port[0];
502
503         dbg("%s - port %d", __FUNCTION__, port->number);
504
505         priv = kzalloc(sizeof (struct cypress_private), GFP_KERNEL);
506         if (!priv)
507                 return -ENOMEM;
508
509         priv->comm_is_ok = !0;
510         spin_lock_init(&priv->lock);
511         priv->buf = cypress_buf_alloc(CYPRESS_BUF_SIZE);
512         if (priv->buf == NULL) {
513                 kfree(priv);
514                 return -ENOMEM;
515         }
516         init_waitqueue_head(&priv->delta_msr_wait);
517         
518         usb_reset_configuration (serial->dev);
519         
520         priv->cmd_ctrl = 0;
521         priv->line_control = 0;
522         priv->termios_initialized = 0;
523         priv->rx_flags = 0;
524         priv->cbr_mask = B300;
525         if (interval > 0) {
526                 priv->write_urb_interval = interval;
527                 priv->read_urb_interval = interval;
528                 dbg("%s - port %d read & write intervals forced to %d",
529                     __FUNCTION__,port->number,interval);
530         } else {
531                 priv->write_urb_interval = port->interrupt_out_urb->interval;
532                 priv->read_urb_interval = port->interrupt_in_urb->interval;
533                 dbg("%s - port %d intervals: read=%d write=%d",
534                     __FUNCTION__,port->number,
535                     priv->read_urb_interval,priv->write_urb_interval);
536         }
537         usb_set_serial_port_data(port, priv);
538         
539         return 0;
540 }
541
542
543 static int cypress_earthmate_startup (struct usb_serial *serial)
544 {
545         struct cypress_private *priv;
546
547         dbg("%s", __FUNCTION__);
548
549         if (generic_startup(serial)) {
550                 dbg("%s - Failed setting up port %d", __FUNCTION__,
551                                 serial->port[0]->number);
552                 return 1;
553         }
554
555         priv = usb_get_serial_port_data(serial->port[0]);
556         priv->chiptype = CT_EARTHMATE;
557
558         return 0;
559 } /* cypress_earthmate_startup */
560
561
562 static int cypress_hidcom_startup (struct usb_serial *serial)
563 {
564         struct cypress_private *priv;
565
566         dbg("%s", __FUNCTION__);
567
568         if (generic_startup(serial)) {
569                 dbg("%s - Failed setting up port %d", __FUNCTION__,
570                                 serial->port[0]->number);
571                 return 1;
572         }
573
574         priv = usb_get_serial_port_data(serial->port[0]);
575         priv->chiptype = CT_CYPHIDCOM;
576         
577         return 0;
578 } /* cypress_hidcom_startup */
579
580
581 static int cypress_ca42v2_startup (struct usb_serial *serial)
582 {
583         struct cypress_private *priv;
584
585         dbg("%s", __FUNCTION__);
586
587         if (generic_startup(serial)) {
588                 dbg("%s - Failed setting up port %d", __FUNCTION__,
589                                 serial->port[0]->number);
590                 return 1;
591         }
592
593         priv = usb_get_serial_port_data(serial->port[0]);
594         priv->chiptype = CT_CA42V2;
595
596         return 0;
597 } /* cypress_ca42v2_startup */
598
599
600 static void cypress_shutdown (struct usb_serial *serial)
601 {
602         struct cypress_private *priv;
603
604         dbg ("%s - port %d", __FUNCTION__, serial->port[0]->number);
605
606         /* all open ports are closed at this point */
607
608         priv = usb_get_serial_port_data(serial->port[0]);
609
610         if (priv) {
611                 cypress_buf_free(priv->buf);
612                 kfree(priv);
613                 usb_set_serial_port_data(serial->port[0], NULL);
614         }
615 }
616
617
618 static int cypress_open (struct usb_serial_port *port, struct file *filp)
619 {
620         struct cypress_private *priv = usb_get_serial_port_data(port);
621         struct usb_serial *serial = port->serial;
622         unsigned long flags;
623         int result = 0;
624
625         dbg("%s - port %d", __FUNCTION__, port->number);
626
627         if (!priv->comm_is_ok)
628                 return -EIO;
629
630         /* clear halts before open */
631         usb_clear_halt(serial->dev, 0x81);
632         usb_clear_halt(serial->dev, 0x02);
633
634         spin_lock_irqsave(&priv->lock, flags);
635         /* reset read/write statistics */
636         priv->bytes_in = 0;
637         priv->bytes_out = 0;
638         priv->cmd_count = 0;
639         priv->rx_flags = 0;
640         spin_unlock_irqrestore(&priv->lock, flags);
641
642         /* setting to zero could cause data loss */
643         port->tty->low_latency = 1;
644
645         /* raise both lines and set termios */
646         spin_lock_irqsave(&priv->lock, flags);
647         priv->line_control = CONTROL_DTR | CONTROL_RTS;
648         priv->cmd_ctrl = 1;
649         spin_unlock_irqrestore(&priv->lock, flags);
650         result = cypress_write(port, NULL, 0);
651
652         if (result) {
653                 dev_err(&port->dev, "%s - failed setting the control lines - error %d\n", __FUNCTION__, result);
654                 return result;
655         } else
656                 dbg("%s - success setting the control lines", __FUNCTION__);    
657
658         cypress_set_termios(port, &priv->tmp_termios);
659
660         /* setup the port and start reading from the device */
661         if(!port->interrupt_in_urb){
662                 err("%s - interrupt_in_urb is empty!", __FUNCTION__);
663                 return(-1);
664         }
665
666         usb_fill_int_urb(port->interrupt_in_urb, serial->dev,
667                 usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress),
668                 port->interrupt_in_urb->transfer_buffer, port->interrupt_in_urb->transfer_buffer_length,
669                 cypress_read_int_callback, port, priv->read_urb_interval);
670         result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
671
672         if (result){
673                 dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __FUNCTION__, result);
674                 cypress_set_dead(port);
675         }
676
677         return result;
678 } /* cypress_open */
679
680
681 static void cypress_close(struct usb_serial_port *port, struct file * filp)
682 {
683         struct cypress_private *priv = usb_get_serial_port_data(port);
684         unsigned int c_cflag;
685         unsigned long flags;
686         int bps;
687         long timeout;
688         wait_queue_t wait;
689
690         dbg("%s - port %d", __FUNCTION__, port->number);
691
692         /* wait for data to drain from buffer */
693         spin_lock_irqsave(&priv->lock, flags);
694         timeout = CYPRESS_CLOSING_WAIT;
695         init_waitqueue_entry(&wait, current);
696         add_wait_queue(&port->tty->write_wait, &wait);
697         for (;;) {
698                 set_current_state(TASK_INTERRUPTIBLE);
699                 if (cypress_buf_data_avail(priv->buf) == 0
700                 || timeout == 0 || signal_pending(current)
701                 || !usb_get_intfdata(port->serial->interface))
702                         break;
703                 spin_unlock_irqrestore(&priv->lock, flags);
704                 timeout = schedule_timeout(timeout);
705                 spin_lock_irqsave(&priv->lock, flags);
706         }
707         set_current_state(TASK_RUNNING);
708         remove_wait_queue(&port->tty->write_wait, &wait);
709         /* clear out any remaining data in the buffer */
710         cypress_buf_clear(priv->buf);
711         spin_unlock_irqrestore(&priv->lock, flags);
712         
713         /* wait for characters to drain from device */
714         bps = tty_get_baud_rate(port->tty);
715         if (bps > 1200)
716                 timeout = max((HZ*2560)/bps,HZ/10);
717         else
718                 timeout = 2*HZ;
719         schedule_timeout_interruptible(timeout);
720
721         dbg("%s - stopping urbs", __FUNCTION__);
722         usb_kill_urb (port->interrupt_in_urb);
723         usb_kill_urb (port->interrupt_out_urb);
724
725         if (port->tty) {
726                 c_cflag = port->tty->termios->c_cflag;
727                 if (c_cflag & HUPCL) {
728                         /* drop dtr and rts */
729                         priv = usb_get_serial_port_data(port);
730                         spin_lock_irqsave(&priv->lock, flags);
731                         priv->line_control = 0;
732                         priv->cmd_ctrl = 1;
733                         spin_unlock_irqrestore(&priv->lock, flags);
734                         cypress_write(port, NULL, 0);
735                 }
736         }
737
738         if (stats)
739                 dev_info (&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n",
740                           priv->bytes_in, priv->bytes_out, priv->cmd_count);
741 } /* cypress_close */
742
743
744 static int cypress_write(struct usb_serial_port *port, const unsigned char *buf, int count)
745 {
746         struct cypress_private *priv = usb_get_serial_port_data(port);
747         unsigned long flags;
748         
749         dbg("%s - port %d, %d bytes", __FUNCTION__, port->number, count);
750
751         /* line control commands, which need to be executed immediately,
752            are not put into the buffer for obvious reasons.
753          */
754         if (priv->cmd_ctrl) {
755                 count = 0;
756                 goto finish;
757         }
758         
759         if (!count)
760                 return count;
761         
762         spin_lock_irqsave(&priv->lock, flags);
763         count = cypress_buf_put(priv->buf, buf, count);
764         spin_unlock_irqrestore(&priv->lock, flags);
765
766 finish:
767         cypress_send(port);
768
769         return count;
770 } /* cypress_write */
771
772
773 static void cypress_send(struct usb_serial_port *port)
774 {
775         int count = 0, result, offset, actual_size;
776         struct cypress_private *priv = usb_get_serial_port_data(port);
777         unsigned long flags;
778         
779         if (!priv->comm_is_ok)
780                 return;
781
782         dbg("%s - port %d", __FUNCTION__, port->number);
783         dbg("%s - interrupt out size is %d", __FUNCTION__, port->interrupt_out_size);
784         
785         spin_lock_irqsave(&priv->lock, flags);
786         if (priv->write_urb_in_use) {
787                 dbg("%s - can't write, urb in use", __FUNCTION__);
788                 spin_unlock_irqrestore(&priv->lock, flags);
789                 return;
790         }
791         spin_unlock_irqrestore(&priv->lock, flags);
792
793         /* clear buffer */
794         memset(port->interrupt_out_urb->transfer_buffer, 0, port->interrupt_out_size);
795
796         spin_lock_irqsave(&priv->lock, flags);
797         switch (port->interrupt_out_size) {
798                 case 32:
799                         /* this is for the CY7C64013... */
800                         offset = 2;
801                         port->interrupt_out_buffer[0] = priv->line_control;
802                         break;
803                 case 8:
804                         /* this is for the CY7C63743... */
805                         offset = 1;
806                         port->interrupt_out_buffer[0] = priv->line_control;
807                         break;
808                 default:
809                         dbg("%s - wrong packet size", __FUNCTION__);
810                         spin_unlock_irqrestore(&priv->lock, flags);
811                         return;
812         }
813
814         if (priv->line_control & CONTROL_RESET)
815                 priv->line_control &= ~CONTROL_RESET;
816
817         if (priv->cmd_ctrl) {
818                 priv->cmd_count++;
819                 dbg("%s - line control command being issued", __FUNCTION__);
820                 spin_unlock_irqrestore(&priv->lock, flags);
821                 goto send;
822         } else
823                 spin_unlock_irqrestore(&priv->lock, flags);
824
825         count = cypress_buf_get(priv->buf, &port->interrupt_out_buffer[offset],
826                                 port->interrupt_out_size-offset);
827
828         if (count == 0) {
829                 return;
830         }
831
832         switch (port->interrupt_out_size) {
833                 case 32:
834                         port->interrupt_out_buffer[1] = count;
835                         break;
836                 case 8:
837                         port->interrupt_out_buffer[0] |= count;
838         }
839
840         dbg("%s - count is %d", __FUNCTION__, count);
841
842 send:
843         spin_lock_irqsave(&priv->lock, flags);
844         priv->write_urb_in_use = 1;
845         spin_unlock_irqrestore(&priv->lock, flags);
846
847         if (priv->cmd_ctrl)
848                 actual_size = 1;
849         else
850                 actual_size = count + (port->interrupt_out_size == 32 ? 2 : 1);
851         
852         usb_serial_debug_data(debug, &port->dev, __FUNCTION__, port->interrupt_out_size,
853                               port->interrupt_out_urb->transfer_buffer);
854
855         usb_fill_int_urb(port->interrupt_out_urb, port->serial->dev,
856                 usb_sndintpipe(port->serial->dev, port->interrupt_out_endpointAddress),
857                 port->interrupt_out_buffer, port->interrupt_out_size,
858                 cypress_write_int_callback, port, priv->write_urb_interval);
859         result = usb_submit_urb (port->interrupt_out_urb, GFP_ATOMIC);
860         if (result) {
861                 dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __FUNCTION__,
862                         result);
863                 priv->write_urb_in_use = 0;
864                 cypress_set_dead(port);
865         }
866
867         spin_lock_irqsave(&priv->lock, flags);
868         if (priv->cmd_ctrl) {
869                 priv->cmd_ctrl = 0;
870         }
871         priv->bytes_out += count; /* do not count the line control and size bytes */
872         spin_unlock_irqrestore(&priv->lock, flags);
873
874         usb_serial_port_softint(port);
875 } /* cypress_send */
876
877
878 /* returns how much space is available in the soft buffer */
879 static int cypress_write_room(struct usb_serial_port *port)
880 {
881         struct cypress_private *priv = usb_get_serial_port_data(port);
882         int room = 0;
883         unsigned long flags;
884
885         dbg("%s - port %d", __FUNCTION__, port->number);
886
887         spin_lock_irqsave(&priv->lock, flags);
888         room = cypress_buf_space_avail(priv->buf);
889         spin_unlock_irqrestore(&priv->lock, flags);
890
891         dbg("%s - returns %d", __FUNCTION__, room);
892         return room;
893 }
894
895
896 static int cypress_tiocmget (struct usb_serial_port *port, struct file *file)
897 {
898         struct cypress_private *priv = usb_get_serial_port_data(port);
899         __u8 status, control;
900         unsigned int result = 0;
901         unsigned long flags;
902         
903         dbg("%s - port %d", __FUNCTION__, port->number);
904
905         spin_lock_irqsave(&priv->lock, flags);
906         control = priv->line_control;
907         status = priv->current_status;
908         spin_unlock_irqrestore(&priv->lock, flags);
909
910         result = ((control & CONTROL_DTR)        ? TIOCM_DTR : 0)
911                 | ((control & CONTROL_RTS)       ? TIOCM_RTS : 0)
912                 | ((status & UART_CTS)        ? TIOCM_CTS : 0)
913                 | ((status & UART_DSR)        ? TIOCM_DSR : 0)
914                 | ((status & UART_RI)         ? TIOCM_RI  : 0)
915                 | ((status & UART_CD)         ? TIOCM_CD  : 0);
916
917         dbg("%s - result = %x", __FUNCTION__, result);
918
919         return result;
920 }
921
922
923 static int cypress_tiocmset (struct usb_serial_port *port, struct file *file,
924                                unsigned int set, unsigned int clear)
925 {
926         struct cypress_private *priv = usb_get_serial_port_data(port);
927         unsigned long flags;
928         
929         dbg("%s - port %d", __FUNCTION__, port->number);
930
931         spin_lock_irqsave(&priv->lock, flags);
932         if (set & TIOCM_RTS)
933                 priv->line_control |= CONTROL_RTS;
934         if (set & TIOCM_DTR)
935                 priv->line_control |= CONTROL_DTR;
936         if (clear & TIOCM_RTS)
937                 priv->line_control &= ~CONTROL_RTS;
938         if (clear & TIOCM_DTR)
939                 priv->line_control &= ~CONTROL_DTR;
940         spin_unlock_irqrestore(&priv->lock, flags);
941
942         priv->cmd_ctrl = 1;
943         return cypress_write(port, NULL, 0);
944 }
945
946
947 static int cypress_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
948 {
949         struct cypress_private *priv = usb_get_serial_port_data(port);
950
951         dbg("%s - port %d, cmd 0x%.4x", __FUNCTION__, port->number, cmd);
952
953         switch (cmd) {
954                 case TIOCGSERIAL:
955                         if (copy_to_user((void __user *)arg, port->tty->termios, sizeof(struct ktermios))) {
956                                 return -EFAULT;
957                         }
958                         return (0);
959                         break;
960                 case TIOCSSERIAL:
961                         if (copy_from_user(port->tty->termios, (void __user *)arg, sizeof(struct ktermios))) {
962                                 return -EFAULT;
963                         }
964                         /* here we need to call cypress_set_termios to invoke the new settings */
965                         cypress_set_termios(port, &priv->tmp_termios);
966                         return (0);
967                         break;
968                 /* This code comes from drivers/char/serial.c and ftdi_sio.c */
969                 case TIOCMIWAIT:
970                         while (priv != NULL) {
971                                 interruptible_sleep_on(&priv->delta_msr_wait);
972                                 /* see if a signal did it */
973                                 if (signal_pending(current))
974                                         return -ERESTARTSYS;
975                                 else {
976                                         char diff = priv->diff_status;
977
978                                         if (diff == 0) {
979                                                 return -EIO; /* no change => error */
980                                         }
981                                         
982                                         /* consume all events */
983                                         priv->diff_status = 0;
984
985                                         /* return 0 if caller wanted to know about these bits */
986                                         if ( ((arg & TIOCM_RNG) && (diff & UART_RI)) ||
987                                              ((arg & TIOCM_DSR) && (diff & UART_DSR)) ||
988                                              ((arg & TIOCM_CD) && (diff & UART_CD)) ||
989                                              ((arg & TIOCM_CTS) && (diff & UART_CTS)) ) {
990                                                 return 0;
991                                         }
992                                         /* otherwise caller can't care less about what happened,
993                                          * and so we continue to wait for more events.
994                                          */
995                                 }
996                         }
997                         return 0;
998                         break;
999                 default:
1000                         break;
1001         }
1002
1003         dbg("%s - arg not supported - it was 0x%04x - check include/asm/ioctls.h", __FUNCTION__, cmd);
1004
1005         return -ENOIOCTLCMD;
1006 } /* cypress_ioctl */
1007
1008
1009 static void cypress_set_termios (struct usb_serial_port *port,
1010                 struct ktermios *old_termios)
1011 {
1012         struct cypress_private *priv = usb_get_serial_port_data(port);
1013         struct tty_struct *tty;
1014         int data_bits, stop_bits, parity_type, parity_enable;
1015         unsigned cflag, iflag, baud_mask;
1016         unsigned long flags;
1017         __u8 oldlines;
1018         int linechange = 0;
1019
1020         dbg("%s - port %d", __FUNCTION__, port->number);
1021
1022         tty = port->tty;
1023         if ((!tty) || (!tty->termios)) {
1024                 dbg("%s - no tty structures", __FUNCTION__);
1025                 return;
1026         }
1027
1028         spin_lock_irqsave(&priv->lock, flags);
1029         if (!priv->termios_initialized) {
1030                 if (priv->chiptype == CT_EARTHMATE) {
1031                         *(tty->termios) = tty_std_termios;
1032                         tty->termios->c_cflag = B4800 | CS8 | CREAD | HUPCL |
1033                                 CLOCAL;
1034                 } else if (priv->chiptype == CT_CYPHIDCOM) {
1035                         *(tty->termios) = tty_std_termios;
1036                         tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL |
1037                                 CLOCAL;
1038                 } else if (priv->chiptype == CT_CA42V2) {
1039                         *(tty->termios) = tty_std_termios;
1040                         tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL |
1041                                 CLOCAL;
1042                 }
1043                 priv->termios_initialized = 1;
1044         }
1045         spin_unlock_irqrestore(&priv->lock, flags);
1046
1047         cflag = tty->termios->c_cflag;
1048         iflag = tty->termios->c_iflag;
1049
1050         /* check if there are new settings */
1051         if (old_termios) {
1052                 if ((cflag != old_termios->c_cflag) ||
1053                         (RELEVANT_IFLAG(iflag) !=
1054                          RELEVANT_IFLAG(old_termios->c_iflag))) {
1055                         dbg("%s - attempting to set new termios settings",
1056                                         __FUNCTION__);
1057                         /* should make a copy of this in case something goes
1058                          * wrong in the function, we can restore it */
1059                         spin_lock_irqsave(&priv->lock, flags);
1060                         priv->tmp_termios = *(tty->termios);
1061                         spin_unlock_irqrestore(&priv->lock, flags);
1062                 } else {
1063                         dbg("%s - nothing to do, exiting", __FUNCTION__);
1064                         return;
1065                 }
1066         } else
1067                 return;
1068
1069         /* set number of data bits, parity, stop bits */
1070         /* when parity is disabled the parity type bit is ignored */
1071
1072         /* 1 means 2 stop bits, 0 means 1 stop bit */
1073         stop_bits = cflag & CSTOPB ? 1 : 0;
1074
1075         if (cflag & PARENB) {
1076                 parity_enable = 1;
1077                 /* 1 means odd parity, 0 means even parity */
1078                 parity_type = cflag & PARODD ? 1 : 0;
1079         } else
1080                 parity_enable = parity_type = 0;
1081
1082         if (cflag & CSIZE) {
1083                 switch (cflag & CSIZE) {
1084                         case CS5:
1085                                 data_bits = 0;
1086                                 break;
1087                         case CS6:
1088                                 data_bits = 1;
1089                                 break;
1090                         case CS7:
1091                                 data_bits = 2;
1092                                 break;
1093                         case CS8:
1094                                 data_bits = 3;
1095                                 break;
1096                         default:
1097                                 err("%s - CSIZE was set, but not CS5-CS8",
1098                                                 __FUNCTION__);
1099                                 data_bits = 3;
1100                 }
1101         } else
1102                 data_bits = 3;
1103
1104         spin_lock_irqsave(&priv->lock, flags);
1105         oldlines = priv->line_control;
1106         if ((cflag & CBAUD) == B0) {
1107                 /* drop dtr and rts */
1108                 dbg("%s - dropping the lines, baud rate 0bps", __FUNCTION__);
1109                 baud_mask = B0;
1110                 priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
1111         } else {
1112                 baud_mask = (cflag & CBAUD);
1113                 switch(baud_mask) {
1114                         case B300:
1115                                 dbg("%s - setting baud 300bps", __FUNCTION__);
1116                                 break;
1117                         case B600:
1118                                 dbg("%s - setting baud 600bps", __FUNCTION__);
1119                                 break;
1120                         case B1200:
1121                                 dbg("%s - setting baud 1200bps", __FUNCTION__);
1122                                 break;
1123                         case B2400:
1124                                 dbg("%s - setting baud 2400bps", __FUNCTION__);
1125                                 break;
1126                         case B4800:
1127                                 dbg("%s - setting baud 4800bps", __FUNCTION__);
1128                                 break;
1129                         case B9600:
1130                                 dbg("%s - setting baud 9600bps", __FUNCTION__);
1131                                 break;
1132                         case B19200:
1133                                 dbg("%s - setting baud 19200bps", __FUNCTION__);
1134                                 break;
1135                         case B38400:
1136                                 dbg("%s - setting baud 38400bps", __FUNCTION__);
1137                                 break;
1138                         case B57600:
1139                                 dbg("%s - setting baud 57600bps", __FUNCTION__);
1140                                 break;
1141                         case B115200:
1142                                 dbg("%s - setting baud 115200bps", __FUNCTION__);
1143                                 break;
1144                         default:
1145                                 dbg("%s - unknown masked baud rate", __FUNCTION__);
1146                 }
1147                 priv->line_control = (CONTROL_DTR | CONTROL_RTS);
1148         }
1149         spin_unlock_irqrestore(&priv->lock, flags);
1150
1151         dbg("%s - sending %d stop_bits, %d parity_enable, %d parity_type, "
1152                         "%d data_bits (+5)", __FUNCTION__, stop_bits,
1153                         parity_enable, parity_type, data_bits);
1154
1155         cypress_serial_control(port, baud_mask, data_bits, stop_bits,
1156                         parity_enable, parity_type, 0, CYPRESS_SET_CONFIG);
1157
1158         /* we perform a CYPRESS_GET_CONFIG so that the current settings are
1159          * filled into the private structure this should confirm that all is
1160          * working if it returns what we just set */
1161         cypress_serial_control(port, 0, 0, 0, 0, 0, 0, CYPRESS_GET_CONFIG);
1162
1163         /* Here we can define custom tty settings for devices; the main tty
1164          * termios flag base comes from empeg.c */
1165
1166         spin_lock_irqsave(&priv->lock, flags);
1167         if ( (priv->chiptype == CT_EARTHMATE) && (priv->baud_rate == 4800) ) {
1168                 dbg("Using custom termios settings for a baud rate of "
1169                                 "4800bps.");
1170                 /* define custom termios settings for NMEA protocol */
1171
1172                 tty->termios->c_iflag /* input modes - */
1173                         &= ~(IGNBRK  /* disable ignore break */
1174                         | BRKINT     /* disable break causes interrupt */
1175                         | PARMRK     /* disable mark parity errors */
1176                         | ISTRIP     /* disable clear high bit of input char */
1177                         | INLCR      /* disable translate NL to CR */
1178                         | IGNCR      /* disable ignore CR */
1179                         | ICRNL      /* disable translate CR to NL */
1180                         | IXON);     /* disable enable XON/XOFF flow control */
1181
1182                 tty->termios->c_oflag /* output modes */
1183                         &= ~OPOST;    /* disable postprocess output char */
1184
1185                 tty->termios->c_lflag /* line discipline modes */
1186                         &= ~(ECHO     /* disable echo input characters */
1187                         | ECHONL      /* disable echo new line */
1188                         | ICANON      /* disable erase, kill, werase, and rprnt
1189                                          special characters */
1190                         | ISIG        /* disable interrupt, quit, and suspend
1191                                          special characters */
1192                         | IEXTEN);    /* disable non-POSIX special characters */
1193         } /* CT_CYPHIDCOM: Application should handle this for device */
1194
1195         linechange = (priv->line_control != oldlines);
1196         spin_unlock_irqrestore(&priv->lock, flags);
1197
1198         /* if necessary, set lines */
1199         if (linechange) {
1200                 priv->cmd_ctrl = 1;
1201                 cypress_write(port, NULL, 0);
1202         }
1203 } /* cypress_set_termios */
1204
1205
1206 /* returns amount of data still left in soft buffer */
1207 static int cypress_chars_in_buffer(struct usb_serial_port *port)
1208 {
1209         struct cypress_private *priv = usb_get_serial_port_data(port);
1210         int chars = 0;
1211         unsigned long flags;
1212
1213         dbg("%s - port %d", __FUNCTION__, port->number);
1214         
1215         spin_lock_irqsave(&priv->lock, flags);
1216         chars = cypress_buf_data_avail(priv->buf);
1217         spin_unlock_irqrestore(&priv->lock, flags);
1218
1219         dbg("%s - returns %d", __FUNCTION__, chars);
1220         return chars;
1221 }
1222
1223
1224 static void cypress_throttle (struct usb_serial_port *port)
1225 {
1226         struct cypress_private *priv = usb_get_serial_port_data(port);
1227         unsigned long flags;
1228
1229         dbg("%s - port %d", __FUNCTION__, port->number);
1230
1231         spin_lock_irqsave(&priv->lock, flags);
1232         priv->rx_flags = THROTTLED;
1233         spin_unlock_irqrestore(&priv->lock, flags);
1234 }
1235
1236
1237 static void cypress_unthrottle (struct usb_serial_port *port)
1238 {
1239         struct cypress_private *priv = usb_get_serial_port_data(port);
1240         int actually_throttled, result;
1241         unsigned long flags;
1242
1243         dbg("%s - port %d", __FUNCTION__, port->number);
1244
1245         spin_lock_irqsave(&priv->lock, flags);
1246         actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
1247         priv->rx_flags = 0;
1248         spin_unlock_irqrestore(&priv->lock, flags);
1249
1250         if (!priv->comm_is_ok)
1251                 return;
1252
1253         if (actually_throttled) {
1254                 port->interrupt_in_urb->dev = port->serial->dev;
1255
1256                 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
1257                 if (result) {
1258                         dev_err(&port->dev, "%s - failed submitting read urb, "
1259                                         "error %d\n", __FUNCTION__, result);
1260                         cypress_set_dead(port);
1261                 }
1262         }
1263 }
1264
1265
1266 static void cypress_read_int_callback(struct urb *urb)
1267 {
1268         struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
1269         struct cypress_private *priv = usb_get_serial_port_data(port);
1270         struct tty_struct *tty;
1271         unsigned char *data = urb->transfer_buffer;
1272         unsigned long flags;
1273         char tty_flag = TTY_NORMAL;
1274         int havedata = 0;
1275         int bytes = 0;
1276         int result;
1277         int i = 0;
1278
1279         dbg("%s - port %d", __FUNCTION__, port->number);
1280
1281         switch (urb->status) {
1282         case 0: /* success */
1283                 break;
1284         case -ECONNRESET:
1285         case -ENOENT:
1286         case -ESHUTDOWN:
1287                 /* precursor to disconnect so just go away */
1288                 return;
1289         case -EPIPE:
1290                 usb_clear_halt(port->serial->dev,0x81);
1291                 break;
1292         default:
1293                 /* something ugly is going on... */
1294                 dev_err(&urb->dev->dev,"%s - unexpected nonzero read status received: %d\n",
1295                         __FUNCTION__,urb->status);
1296                 cypress_set_dead(port);
1297                 return;
1298         }
1299
1300         spin_lock_irqsave(&priv->lock, flags);
1301         if (priv->rx_flags & THROTTLED) {
1302                 dbg("%s - now throttling", __FUNCTION__);
1303                 priv->rx_flags |= ACTUALLY_THROTTLED;
1304                 spin_unlock_irqrestore(&priv->lock, flags);
1305                 return;
1306         }
1307         spin_unlock_irqrestore(&priv->lock, flags);
1308
1309         tty = port->tty;
1310         if (!tty) {
1311                 dbg("%s - bad tty pointer - exiting", __FUNCTION__);
1312                 return;
1313         }
1314
1315         spin_lock_irqsave(&priv->lock, flags);
1316         switch(urb->actual_length) {
1317                 case 32:
1318                         /* This is for the CY7C64013... */
1319                         priv->current_status = data[0] & 0xF8;
1320                         bytes = data[1] + 2;
1321                         i = 2;
1322                         if (bytes > 2)
1323                                 havedata = 1;
1324                         break;
1325                 case 8:
1326                         /* This is for the CY7C63743... */
1327                         priv->current_status = data[0] & 0xF8;
1328                         bytes = (data[0] & 0x07) + 1;
1329                         i = 1;
1330                         if (bytes > 1)
1331                                 havedata = 1;
1332                         break;
1333                 default:
1334                         dbg("%s - wrong packet size - received %d bytes",
1335                                         __FUNCTION__, urb->actual_length);
1336                         spin_unlock_irqrestore(&priv->lock, flags);
1337                         goto continue_read;
1338         }
1339         spin_unlock_irqrestore(&priv->lock, flags);
1340
1341         usb_serial_debug_data (debug, &port->dev, __FUNCTION__,
1342                         urb->actual_length, data);
1343
1344         spin_lock_irqsave(&priv->lock, flags);
1345         /* check to see if status has changed */
1346         if (priv != NULL) {
1347                 if (priv->current_status != priv->prev_status) {
1348                         priv->diff_status |= priv->current_status ^
1349                                 priv->prev_status;
1350                         wake_up_interruptible(&priv->delta_msr_wait);
1351                         priv->prev_status = priv->current_status;
1352                 }
1353         }
1354         spin_unlock_irqrestore(&priv->lock, flags);
1355
1356         /* hangup, as defined in acm.c... this might be a bad place for it
1357          * though */
1358         if (tty && !(tty->termios->c_cflag & CLOCAL) &&
1359                         !(priv->current_status & UART_CD)) {
1360                 dbg("%s - calling hangup", __FUNCTION__);
1361                 tty_hangup(tty);
1362                 goto continue_read;
1363         }
1364
1365         /* There is one error bit... I'm assuming it is a parity error
1366          * indicator as the generic firmware will set this bit to 1 if a
1367          * parity error occurs.
1368          * I can not find reference to any other error events. */
1369         spin_lock_irqsave(&priv->lock, flags);
1370         if (priv->current_status & CYP_ERROR) {
1371                 spin_unlock_irqrestore(&priv->lock, flags);
1372                 tty_flag = TTY_PARITY;
1373                 dbg("%s - Parity Error detected", __FUNCTION__);
1374         } else
1375                 spin_unlock_irqrestore(&priv->lock, flags);
1376
1377         /* process read if there is data other than line status */
1378         if (tty && (bytes > i)) {
1379                 bytes = tty_buffer_request_room(tty, bytes);
1380                 for (; i < bytes ; ++i) {
1381                         dbg("pushing byte number %d - %d - %c", i, data[i],
1382                                         data[i]);
1383                         tty_insert_flip_char(tty, data[i], tty_flag);
1384                 }
1385                 tty_flip_buffer_push(port->tty);
1386         }
1387
1388         spin_lock_irqsave(&priv->lock, flags);
1389         /* control and status byte(s) are also counted */
1390         priv->bytes_in += bytes;
1391         spin_unlock_irqrestore(&priv->lock, flags);
1392
1393 continue_read:
1394
1395         /* Continue trying to always read... unless the port has closed. */
1396
1397         if (port->open_count > 0 && priv->comm_is_ok) {
1398                 usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev,
1399                                 usb_rcvintpipe(port->serial->dev,
1400                                         port->interrupt_in_endpointAddress),
1401                                 port->interrupt_in_urb->transfer_buffer,
1402                                 port->interrupt_in_urb->transfer_buffer_length,
1403                                 cypress_read_int_callback, port, priv->read_urb_interval);
1404                 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
1405                 if (result) {
1406                         dev_err(&urb->dev->dev, "%s - failed resubmitting "
1407                                         "read urb, error %d\n", __FUNCTION__,
1408                                         result);
1409                         cypress_set_dead(port);
1410                 }
1411         }
1412
1413         return;
1414 } /* cypress_read_int_callback */
1415
1416
1417 static void cypress_write_int_callback(struct urb *urb)
1418 {
1419         struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
1420         struct cypress_private *priv = usb_get_serial_port_data(port);
1421         int result;
1422
1423         dbg("%s - port %d", __FUNCTION__, port->number);
1424         
1425         switch (urb->status) {
1426                 case 0:
1427                         /* success */
1428                         break;
1429                 case -ECONNRESET:
1430                 case -ENOENT:
1431                 case -ESHUTDOWN:
1432                         /* this urb is terminated, clean up */
1433                         dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
1434                         priv->write_urb_in_use = 0;
1435                         return;
1436                 case -EPIPE: /* no break needed; clear halt and resubmit */
1437                         if (!priv->comm_is_ok)
1438                                 break;
1439                         usb_clear_halt(port->serial->dev, 0x02);
1440                         /* error in the urb, so we have to resubmit it */
1441                         dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status);
1442                         port->interrupt_out_urb->transfer_buffer_length = 1;
1443                         port->interrupt_out_urb->dev = port->serial->dev;
1444                         result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
1445                         if (!result)
1446                                 return;
1447                         dev_err(&urb->dev->dev, "%s - failed resubmitting write urb, error %d\n",
1448                                 __FUNCTION__, result);
1449                         cypress_set_dead(port);
1450                         break;
1451                 default:
1452                         dev_err(&urb->dev->dev,"%s - unexpected nonzero write status received: %d\n",
1453                                 __FUNCTION__,urb->status);
1454                         cypress_set_dead(port);
1455                         break;
1456         }
1457         
1458         priv->write_urb_in_use = 0;
1459         
1460         /* send any buffered data */
1461         cypress_send(port);
1462 }
1463
1464
1465 /*****************************************************************************
1466  * Write buffer functions - buffering code from pl2303 used
1467  *****************************************************************************/
1468
1469 /*
1470  * cypress_buf_alloc
1471  *
1472  * Allocate a circular buffer and all associated memory.
1473  */
1474
1475 static struct cypress_buf *cypress_buf_alloc(unsigned int size)
1476 {
1477
1478         struct cypress_buf *cb;
1479
1480
1481         if (size == 0)
1482                 return NULL;
1483
1484         cb = kmalloc(sizeof(struct cypress_buf), GFP_KERNEL);
1485         if (cb == NULL)
1486                 return NULL;
1487
1488         cb->buf_buf = kmalloc(size, GFP_KERNEL);
1489         if (cb->buf_buf == NULL) {
1490                 kfree(cb);
1491                 return NULL;
1492         }
1493
1494         cb->buf_size = size;
1495         cb->buf_get = cb->buf_put = cb->buf_buf;
1496
1497         return cb;
1498
1499 }
1500
1501
1502 /*
1503  * cypress_buf_free
1504  *
1505  * Free the buffer and all associated memory.
1506  */
1507
1508 static void cypress_buf_free(struct cypress_buf *cb)
1509 {
1510         if (cb) {
1511                 kfree(cb->buf_buf);
1512                 kfree(cb);
1513         }
1514 }
1515
1516
1517 /*
1518  * cypress_buf_clear
1519  *
1520  * Clear out all data in the circular buffer.
1521  */
1522
1523 static void cypress_buf_clear(struct cypress_buf *cb)
1524 {
1525         if (cb != NULL)
1526                 cb->buf_get = cb->buf_put;
1527                 /* equivalent to a get of all data available */
1528 }
1529
1530
1531 /*
1532  * cypress_buf_data_avail
1533  *
1534  * Return the number of bytes of data available in the circular
1535  * buffer.
1536  */
1537
1538 static unsigned int cypress_buf_data_avail(struct cypress_buf *cb)
1539 {
1540         if (cb != NULL)
1541                 return ((cb->buf_size + cb->buf_put - cb->buf_get) % cb->buf_size);
1542         else
1543                 return 0;
1544 }
1545
1546
1547 /*
1548  * cypress_buf_space_avail
1549  *
1550  * Return the number of bytes of space available in the circular
1551  * buffer.
1552  */
1553
1554 static unsigned int cypress_buf_space_avail(struct cypress_buf *cb)
1555 {
1556         if (cb != NULL)
1557                 return ((cb->buf_size + cb->buf_get - cb->buf_put - 1) % cb->buf_size);
1558         else
1559                 return 0;
1560 }
1561
1562
1563 /*
1564  * cypress_buf_put
1565  *
1566  * Copy data data from a user buffer and put it into the circular buffer.
1567  * Restrict to the amount of space available.
1568  *
1569  * Return the number of bytes copied.
1570  */
1571
1572 static unsigned int cypress_buf_put(struct cypress_buf *cb, const char *buf,
1573         unsigned int count)
1574 {
1575
1576         unsigned int len;
1577
1578
1579         if (cb == NULL)
1580                 return 0;
1581
1582         len  = cypress_buf_space_avail(cb);
1583         if (count > len)
1584                 count = len;
1585
1586         if (count == 0)
1587                 return 0;
1588
1589         len = cb->buf_buf + cb->buf_size - cb->buf_put;
1590         if (count > len) {
1591                 memcpy(cb->buf_put, buf, len);
1592                 memcpy(cb->buf_buf, buf+len, count - len);
1593                 cb->buf_put = cb->buf_buf + count - len;
1594         } else {
1595                 memcpy(cb->buf_put, buf, count);
1596                 if (count < len)
1597                         cb->buf_put += count;
1598                 else /* count == len */
1599                         cb->buf_put = cb->buf_buf;
1600         }
1601
1602         return count;
1603
1604 }
1605
1606
1607 /*
1608  * cypress_buf_get
1609  *
1610  * Get data from the circular buffer and copy to the given buffer.
1611  * Restrict to the amount of data available.
1612  *
1613  * Return the number of bytes copied.
1614  */
1615
1616 static unsigned int cypress_buf_get(struct cypress_buf *cb, char *buf,
1617         unsigned int count)
1618 {
1619
1620         unsigned int len;
1621
1622
1623         if (cb == NULL)
1624                 return 0;
1625
1626         len = cypress_buf_data_avail(cb);
1627         if (count > len)
1628                 count = len;
1629
1630         if (count == 0)
1631                 return 0;
1632
1633         len = cb->buf_buf + cb->buf_size - cb->buf_get;
1634         if (count > len) {
1635                 memcpy(buf, cb->buf_get, len);
1636                 memcpy(buf+len, cb->buf_buf, count - len);
1637                 cb->buf_get = cb->buf_buf + count - len;
1638         } else {
1639                 memcpy(buf, cb->buf_get, count);
1640                 if (count < len)
1641                         cb->buf_get += count;
1642                 else /* count == len */
1643                         cb->buf_get = cb->buf_buf;
1644         }
1645
1646         return count;
1647
1648 }
1649
1650 /*****************************************************************************
1651  * Module functions
1652  *****************************************************************************/
1653
1654 static int __init cypress_init(void)
1655 {
1656         int retval;
1657         
1658         dbg("%s", __FUNCTION__);
1659         
1660         retval = usb_serial_register(&cypress_earthmate_device);
1661         if (retval)
1662                 goto failed_em_register;
1663         retval = usb_serial_register(&cypress_hidcom_device);
1664         if (retval)
1665                 goto failed_hidcom_register;
1666         retval = usb_serial_register(&cypress_ca42v2_device);
1667         if (retval)
1668                 goto failed_ca42v2_register;
1669         retval = usb_register(&cypress_driver);
1670         if (retval)
1671                 goto failed_usb_register;
1672
1673         info(DRIVER_DESC " " DRIVER_VERSION);
1674         return 0;
1675
1676 failed_usb_register:
1677         usb_serial_deregister(&cypress_ca42v2_device);
1678 failed_ca42v2_register:
1679         usb_serial_deregister(&cypress_hidcom_device);
1680 failed_hidcom_register:
1681         usb_serial_deregister(&cypress_earthmate_device);
1682 failed_em_register:
1683         return retval;
1684 }
1685
1686
1687 static void __exit cypress_exit (void)
1688 {
1689         dbg("%s", __FUNCTION__);
1690
1691         usb_deregister (&cypress_driver);
1692         usb_serial_deregister (&cypress_earthmate_device);
1693         usb_serial_deregister (&cypress_hidcom_device);
1694         usb_serial_deregister (&cypress_ca42v2_device);
1695 }
1696
1697
1698 module_init(cypress_init);
1699 module_exit(cypress_exit);
1700
1701 MODULE_AUTHOR( DRIVER_AUTHOR );
1702 MODULE_DESCRIPTION( DRIVER_DESC );
1703 MODULE_VERSION( DRIVER_VERSION );
1704 MODULE_LICENSE("GPL");
1705
1706 module_param(debug, bool, S_IRUGO | S_IWUSR);
1707 MODULE_PARM_DESC(debug, "Debug enabled or not");
1708 module_param(stats, bool, S_IRUGO | S_IWUSR);
1709 MODULE_PARM_DESC(stats, "Enable statistics or not");
1710 module_param(interval, int, S_IRUGO | S_IWUSR);
1711 MODULE_PARM_DESC(interval, "Overrides interrupt interval");