git.oblomov.eu Git - linux-2.6/blob - drivers/serial/sunsab.c

   1 /* sunsab.c: ASYNC Driver for the SIEMENS SAB82532 DUSCC.
   2  *
   3  * Copyright (C) 1997  Eddie C. Dost  (ecd@skynet.be)
   4  * Copyright (C) 2002, 2006  David S. Miller (davem@davemloft.net)
   5  *
   6  * Rewrote buffer handling to use CIRC(Circular Buffer) macros.
   7  *   Maxim Krasnyanskiy <maxk@qualcomm.com>
   8  *
   9  * Fixed to use tty_get_baud_rate, and to allow for arbitrary baud
  10  * rates to be programmed into the UART.  Also eliminated a lot of
  11  * duplicated code in the console setup.
  12  *   Theodore Ts'o <tytso@mit.edu>, 2001-Oct-12
  13  *
  14  * Ported to new 2.5.x UART layer.
  15  *   David S. Miller <davem@davemloft.net>
  16  */
  17
  18 #include <linux/module.h>
  19 #include <linux/kernel.h>
  20 #include <linux/sched.h>
  21 #include <linux/errno.h>
  22 #include <linux/tty.h>
  23 #include <linux/tty_flip.h>
  24 #include <linux/major.h>
  25 #include <linux/string.h>
  26 #include <linux/ptrace.h>
  27 #include <linux/ioport.h>
  28 #include <linux/circ_buf.h>
  29 #include <linux/serial.h>
  30 #include <linux/sysrq.h>
  31 #include <linux/console.h>
  32 #include <linux/spinlock.h>
  33 #include <linux/slab.h>
  34 #include <linux/delay.h>
  35 #include <linux/init.h>
  36
  37 #include <asm/io.h>
  38 #include <asm/irq.h>
  39 #include <asm/prom.h>
  40 #include <asm/of_device.h>
  41
  42 #if defined(CONFIG_SERIAL_SUNZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
  43 #define SUPPORT_SYSRQ
  44 #endif
  45
  46 #include <linux/serial_core.h>
  47
  48 #include "suncore.h"
  49 #include "sunsab.h"
  50
  51 struct uart_sunsab_port {
  52         struct uart_port                port;           /* Generic UART port    */
  53         union sab82532_async_regs       __iomem *regs;  /* Chip registers       */
  54         unsigned long                   irqflags;       /* IRQ state flags      */
  55         int                             dsr;            /* Current DSR state    */
  56         unsigned int                    cec_timeout;    /* Chip poll timeout... */
  57         unsigned int                    tec_timeout;    /* likewise             */
  58         unsigned char                   interrupt_mask0;/* ISR0 masking         */
  59         unsigned char                   interrupt_mask1;/* ISR1 masking         */
  60         unsigned char                   pvr_dtr_bit;    /* Which PVR bit is DTR */
  61         unsigned char                   pvr_dsr_bit;    /* Which PVR bit is DSR */
  62         int                             type;           /* SAB82532 version     */
  63
  64         /* Setting configuration bits while the transmitter is active
  65          * can cause garbage characters to get emitted by the chip.
  66          * Therefore, we cache such writes here and do the real register
  67          * write the next time the transmitter becomes idle.
  68          */
  69         unsigned int                    cached_ebrg;
  70         unsigned char                   cached_mode;
  71         unsigned char                   cached_pvr;
  72         unsigned char                   cached_dafo;
  73 };
  74
  75 /*
  76  * This assumes you have a 29.4912 MHz clock for your UART.
  77  */
  78 #define SAB_BASE_BAUD ( 29491200 / 16 )
  79
  80 static char *sab82532_version[16] = {
  81         "V1.0", "V2.0", "V3.2", "V(0x03)",
  82         "V(0x04)", "V(0x05)", "V(0x06)", "V(0x07)",
  83         "V(0x08)", "V(0x09)", "V(0x0a)", "V(0x0b)",
  84         "V(0x0c)", "V(0x0d)", "V(0x0e)", "V(0x0f)"
  85 };
  86
  87 #define SAB82532_MAX_TEC_TIMEOUT 200000 /* 1 character time (at 50 baud) */
  88 #define SAB82532_MAX_CEC_TIMEOUT  50000 /* 2.5 TX CLKs (at 50 baud) */
  89
  90 #define SAB82532_RECV_FIFO_SIZE 32      /* Standard async fifo sizes */
  91 #define SAB82532_XMIT_FIFO_SIZE 32
  92
  93 static __inline__ void sunsab_tec_wait(struct uart_sunsab_port *up)
  94 {
  95         int timeout = up->tec_timeout;
  96
  97         while ((readb(&up->regs->r.star) & SAB82532_STAR_TEC) && --timeout)
  98                 udelay(1);
  99 }
 100
 101 static __inline__ void sunsab_cec_wait(struct uart_sunsab_port *up)
 102 {
 103         int timeout = up->cec_timeout;
 104
 105         while ((readb(&up->regs->r.star) & SAB82532_STAR_CEC) && --timeout)
 106                 udelay(1);
 107 }
 108
 109 static struct tty_struct *
 110 receive_chars(struct uart_sunsab_port *up,
 111               union sab82532_irq_status *stat,
 112               struct pt_regs *regs)
 113 {
 114         struct tty_struct *tty = NULL;
 115         unsigned char buf[32];
 116         int saw_console_brk = 0;
 117         int free_fifo = 0;
 118         int count = 0;
 119         int i;
 120
 121         if (up->port.info != NULL)              /* Unopened serial console */
 122                 tty = up->port.info->tty;
 123
 124         /* Read number of BYTES (Character + Status) available. */
 125         if (stat->sreg.isr0 & SAB82532_ISR0_RPF) {
 126                 count = SAB82532_RECV_FIFO_SIZE;
 127                 free_fifo++;
 128         }
 129
 130         if (stat->sreg.isr0 & SAB82532_ISR0_TCD) {
 131                 count = readb(&up->regs->r.rbcl) & (SAB82532_RECV_FIFO_SIZE - 1);
 132                 free_fifo++;
 133         }
 134
 135         /* Issue a FIFO read command in case we where idle. */
 136         if (stat->sreg.isr0 & SAB82532_ISR0_TIME) {
 137                 sunsab_cec_wait(up);
 138                 writeb(SAB82532_CMDR_RFRD, &up->regs->w.cmdr);
 139                 return tty;
 140         }
 141
 142         if (stat->sreg.isr0 & SAB82532_ISR0_RFO)
 143                 free_fifo++;
 144
 145         /* Read the FIFO. */
 146         for (i = 0; i < count; i++)
 147                 buf[i] = readb(&up->regs->r.rfifo[i]);
 148
 149         /* Issue Receive Message Complete command. */
 150         if (free_fifo) {
 151                 sunsab_cec_wait(up);
 152                 writeb(SAB82532_CMDR_RMC, &up->regs->w.cmdr);
 153         }
 154
 155         /* Count may be zero for BRK, so we check for it here */
 156         if ((stat->sreg.isr1 & SAB82532_ISR1_BRK) &&
 157             (up->port.line == up->port.cons->index))
 158                 saw_console_brk = 1;
 159
 160         for (i = 0; i < count; i++) {
 161                 unsigned char ch = buf[i], flag;
 162
 163                 if (tty == NULL) {
 164                         uart_handle_sysrq_char(&up->port, ch, regs);
 165                         continue;
 166                 }
 167
 168                 flag = TTY_NORMAL;
 169                 up->port.icount.rx++;
 170
 171                 if (unlikely(stat->sreg.isr0 & (SAB82532_ISR0_PERR |
 172                                                 SAB82532_ISR0_FERR |
 173                                                 SAB82532_ISR0_RFO)) ||
 174                     unlikely(stat->sreg.isr1 & SAB82532_ISR1_BRK)) {
 175                         /*
 176                          * For statistics only
 177                          */
 178                         if (stat->sreg.isr1 & SAB82532_ISR1_BRK) {
 179                                 stat->sreg.isr0 &= ~(SAB82532_ISR0_PERR |
 180                                                      SAB82532_ISR0_FERR);
 181                                 up->port.icount.brk++;
 182                                 /*
 183                                  * We do the SysRQ and SAK checking
 184                                  * here because otherwise the break
 185                                  * may get masked by ignore_status_mask
 186                                  * or read_status_mask.
 187                                  */
 188                                 if (uart_handle_break(&up->port))
 189                                         continue;
 190                         } else if (stat->sreg.isr0 & SAB82532_ISR0_PERR)
 191                                 up->port.icount.parity++;
 192                         else if (stat->sreg.isr0 & SAB82532_ISR0_FERR)
 193                                 up->port.icount.frame++;
 194                         if (stat->sreg.isr0 & SAB82532_ISR0_RFO)
 195                                 up->port.icount.overrun++;
 196
 197                         /*
 198                          * Mask off conditions which should be ingored.
 199                          */
 200                         stat->sreg.isr0 &= (up->port.read_status_mask & 0xff);
 201                         stat->sreg.isr1 &= ((up->port.read_status_mask >> 8) & 0xff);
 202
 203                         if (stat->sreg.isr1 & SAB82532_ISR1_BRK) {
 204                                 flag = TTY_BREAK;
 205                         } else if (stat->sreg.isr0 & SAB82532_ISR0_PERR)
 206                                 flag = TTY_PARITY;
 207                         else if (stat->sreg.isr0 & SAB82532_ISR0_FERR)
 208                                 flag = TTY_FRAME;
 209                 }
 210
 211                 if (uart_handle_sysrq_char(&up->port, ch, regs))
 212                         continue;
 213
 214                 if ((stat->sreg.isr0 & (up->port.ignore_status_mask & 0xff)) == 0 &&
 215                     (stat->sreg.isr1 & ((up->port.ignore_status_mask >> 8) & 0xff)) == 0)
 216                         tty_insert_flip_char(tty, ch, flag);
 217                 if (stat->sreg.isr0 & SAB82532_ISR0_RFO)
 218                         tty_insert_flip_char(tty, 0, TTY_OVERRUN);
 219         }
 220
 221         if (saw_console_brk)
 222                 sun_do_break();
 223
 224         return tty;
 225 }
 226
 227 static void sunsab_stop_tx(struct uart_port *);
 228 static void sunsab_tx_idle(struct uart_sunsab_port *);
 229
 230 static void transmit_chars(struct uart_sunsab_port *up,
 231                            union sab82532_irq_status *stat)
 232 {
 233         struct circ_buf *xmit = &up->port.info->xmit;
 234         int i;
 235
 236         if (stat->sreg.isr1 & SAB82532_ISR1_ALLS) {
 237                 up->interrupt_mask1 |= SAB82532_IMR1_ALLS;
 238                 writeb(up->interrupt_mask1, &up->regs->w.imr1);
 239                 set_bit(SAB82532_ALLS, &up->irqflags);
 240         }
 241
 242 #if 0 /* bde@nwlink.com says this check causes problems */
 243         if (!(stat->sreg.isr1 & SAB82532_ISR1_XPR))
 244                 return;
 245 #endif
 246
 247         if (!(readb(&up->regs->r.star) & SAB82532_STAR_XFW))
 248                 return;
 249
 250         set_bit(SAB82532_XPR, &up->irqflags);
 251         sunsab_tx_idle(up);
 252
 253         if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
 254                 up->interrupt_mask1 |= SAB82532_IMR1_XPR;
 255                 writeb(up->interrupt_mask1, &up->regs->w.imr1);
 256                 return;
 257         }
 258
 259         up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR);
 260         writeb(up->interrupt_mask1, &up->regs->w.imr1);
 261         clear_bit(SAB82532_ALLS, &up->irqflags);
 262
 263         /* Stuff 32 bytes into Transmit FIFO. */
 264         clear_bit(SAB82532_XPR, &up->irqflags);
 265         for (i = 0; i < up->port.fifosize; i++) {
 266                 writeb(xmit->buf[xmit->tail],
 267                        &up->regs->w.xfifo[i]);
 268                 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
 269                 up->port.icount.tx++;
 270                 if (uart_circ_empty(xmit))
 271                         break;
 272         }
 273
 274         /* Issue a Transmit Frame command. */
 275         sunsab_cec_wait(up);
 276         writeb(SAB82532_CMDR_XF, &up->regs->w.cmdr);
 277
 278         if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 279                 uart_write_wakeup(&up->port);
 280
 281         if (uart_circ_empty(xmit))
 282                 sunsab_stop_tx(&up->port);
 283 }
 284
 285 static void check_status(struct uart_sunsab_port *up,
 286                          union sab82532_irq_status *stat)
 287 {
 288         if (stat->sreg.isr0 & SAB82532_ISR0_CDSC)
 289                 uart_handle_dcd_change(&up->port,
 290                                        !(readb(&up->regs->r.vstr) & SAB82532_VSTR_CD));
 291
 292         if (stat->sreg.isr1 & SAB82532_ISR1_CSC)
 293                 uart_handle_cts_change(&up->port,
 294                                        (readb(&up->regs->r.star) & SAB82532_STAR_CTS));
 295
 296         if ((readb(&up->regs->r.pvr) & up->pvr_dsr_bit) ^ up->dsr) {
 297                 up->dsr = (readb(&up->regs->r.pvr) & up->pvr_dsr_bit) ? 0 : 1;
 298                 up->port.icount.dsr++;
 299         }
 300
 301         wake_up_interruptible(&up->port.info->delta_msr_wait);
 302 }
 303
 304 static irqreturn_t sunsab_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 305 {
 306         struct uart_sunsab_port *up = dev_id;
 307         struct tty_struct *tty;
 308         union sab82532_irq_status status;
 309         unsigned long flags;
 310
 311         spin_lock_irqsave(&up->port.lock, flags);
 312
 313         status.stat = 0;
 314         if (readb(&up->regs->r.gis) & SAB82532_GIS_ISA0)
 315                 status.sreg.isr0 = readb(&up->regs->r.isr0);
 316         if (readb(&up->regs->r.gis) & SAB82532_GIS_ISA1)
 317                 status.sreg.isr1 = readb(&up->regs->r.isr1);
 318
 319         tty = NULL;
 320         if (status.stat) {
 321                 if ((status.sreg.isr0 & (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME |
 322                                          SAB82532_ISR0_RFO | SAB82532_ISR0_RPF)) ||
 323                     (status.sreg.isr1 & SAB82532_ISR1_BRK))
 324                         tty = receive_chars(up, &status, regs);
 325                 if ((status.sreg.isr0 & SAB82532_ISR0_CDSC) ||
 326                     (status.sreg.isr1 & SAB82532_ISR1_CSC))
 327                         check_status(up, &status);
 328                 if (status.sreg.isr1 & (SAB82532_ISR1_ALLS | SAB82532_ISR1_XPR))
 329                         transmit_chars(up, &status);
 330         }
 331
 332         spin_unlock(&up->port.lock);
 333
 334         if (tty)
 335                 tty_flip_buffer_push(tty);
 336
 337         up++;
 338
 339         spin_lock(&up->port.lock);
 340
 341         status.stat = 0;
 342         if (readb(&up->regs->r.gis) & SAB82532_GIS_ISB0)
 343                 status.sreg.isr0 = readb(&up->regs->r.isr0);
 344         if (readb(&up->regs->r.gis) & SAB82532_GIS_ISB1)
 345                 status.sreg.isr1 = readb(&up->regs->r.isr1);
 346
 347         tty = NULL;
 348         if (status.stat) {
 349                 if ((status.sreg.isr0 & (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME |
 350                                          SAB82532_ISR0_RFO | SAB82532_ISR0_RPF)) ||
 351                     (status.sreg.isr1 & SAB82532_ISR1_BRK))
 352
 353                         tty = receive_chars(up, &status, regs);
 354                 if ((status.sreg.isr0 & SAB82532_ISR0_CDSC) ||
 355                     (status.sreg.isr1 & (SAB82532_ISR1_BRK | SAB82532_ISR1_CSC)))
 356                         check_status(up, &status);
 357                 if (status.sreg.isr1 & (SAB82532_ISR1_ALLS | SAB82532_ISR1_XPR))
 358                         transmit_chars(up, &status);
 359         }
 360
 361         spin_unlock_irqrestore(&up->port.lock, flags);
 362
 363         if (tty)
 364                 tty_flip_buffer_push(tty);
 365
 366         return IRQ_HANDLED;
 367 }
 368
 369 /* port->lock is not held.  */
 370 static unsigned int sunsab_tx_empty(struct uart_port *port)
 371 {
 372         struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
 373         int ret;
 374
 375         /* Do not need a lock for a state test like this.  */
 376         if (test_bit(SAB82532_ALLS, &up->irqflags))
 377                 ret = TIOCSER_TEMT;
 378         else
 379                 ret = 0;
 380
 381         return ret;
 382 }
 383
 384 /* port->lock held by caller.  */
 385 static void sunsab_set_mctrl(struct uart_port *port, unsigned int mctrl)
 386 {
 387         struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
 388
 389         if (mctrl & TIOCM_RTS) {
 390                 up->cached_mode &= ~SAB82532_MODE_FRTS;
 391                 up->cached_mode |= SAB82532_MODE_RTS;
 392         } else {
 393                 up->cached_mode |= (SAB82532_MODE_FRTS |
 394                                     SAB82532_MODE_RTS);
 395         }
 396         if (mctrl & TIOCM_DTR) {
 397                 up->cached_pvr &= ~(up->pvr_dtr_bit);
 398         } else {
 399                 up->cached_pvr |= up->pvr_dtr_bit;
 400         }
 401
 402         set_bit(SAB82532_REGS_PENDING, &up->irqflags);
 403         if (test_bit(SAB82532_XPR, &up->irqflags))
 404                 sunsab_tx_idle(up);
 405 }
 406
 407 /* port->lock is held by caller and interrupts are disabled.  */
 408 static unsigned int sunsab_get_mctrl(struct uart_port *port)
 409 {
 410         struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
 411         unsigned char val;
 412         unsigned int result;
 413
 414         result = 0;
 415
 416         val = readb(&up->regs->r.pvr);
 417         result |= (val & up->pvr_dsr_bit) ? 0 : TIOCM_DSR;
 418
 419         val = readb(&up->regs->r.vstr);
 420         result |= (val & SAB82532_VSTR_CD) ? 0 : TIOCM_CAR;
 421
 422         val = readb(&up->regs->r.star);
 423         result |= (val & SAB82532_STAR_CTS) ? TIOCM_CTS : 0;
 424
 425         return result;
 426 }
 427
 428 /* port->lock held by caller.  */
 429 static void sunsab_stop_tx(struct uart_port *port)
 430 {
 431         struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
 432
 433         up->interrupt_mask1 |= SAB82532_IMR1_XPR;
 434         writeb(up->interrupt_mask1, &up->regs->w.imr1);
 435 }
 436
 437 /* port->lock held by caller.  */
 438 static void sunsab_tx_idle(struct uart_sunsab_port *up)
 439 {
 440         if (test_bit(SAB82532_REGS_PENDING, &up->irqflags)) {
 441                 u8 tmp;
 442
 443                 clear_bit(SAB82532_REGS_PENDING, &up->irqflags);
 444                 writeb(up->cached_mode, &up->regs->rw.mode);
 445                 writeb(up->cached_pvr, &up->regs->rw.pvr);
 446                 writeb(up->cached_dafo, &up->regs->w.dafo);
 447
 448                 writeb(up->cached_ebrg & 0xff, &up->regs->w.bgr);
 449                 tmp = readb(&up->regs->rw.ccr2);
 450                 tmp &= ~0xc0;
 451                 tmp |= (up->cached_ebrg >> 2) & 0xc0;
 452                 writeb(tmp, &up->regs->rw.ccr2);
 453         }
 454 }
 455
 456 /* port->lock held by caller.  */
 457 static void sunsab_start_tx(struct uart_port *port)
 458 {
 459         struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
 460         struct circ_buf *xmit = &up->port.info->xmit;
 461         int i;
 462
 463         up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR);
 464         writeb(up->interrupt_mask1, &up->regs->w.imr1);
 465
 466         if (!test_bit(SAB82532_XPR, &up->irqflags))
 467                 return;
 468
 469         clear_bit(SAB82532_ALLS, &up->irqflags);
 470         clear_bit(SAB82532_XPR, &up->irqflags);
 471
 472         for (i = 0; i < up->port.fifosize; i++) {
 473                 writeb(xmit->buf[xmit->tail],
 474                        &up->regs->w.xfifo[i]);
 475                 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
 476                 up->port.icount.tx++;
 477                 if (uart_circ_empty(xmit))
 478                         break;
 479         }
 480
 481         /* Issue a Transmit Frame command.  */
 482         sunsab_cec_wait(up);
 483         writeb(SAB82532_CMDR_XF, &up->regs->w.cmdr);
 484 }
 485
 486 /* port->lock is not held.  */
 487 static void sunsab_send_xchar(struct uart_port *port, char ch)
 488 {
 489         struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
 490         unsigned long flags;
 491
 492         spin_lock_irqsave(&up->port.lock, flags);
 493
 494         sunsab_tec_wait(up);
 495         writeb(ch, &up->regs->w.tic);
 496
 497         spin_unlock_irqrestore(&up->port.lock, flags);
 498 }
 499
 500 /* port->lock held by caller.  */
 501 static void sunsab_stop_rx(struct uart_port *port)
 502 {
 503         struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
 504
 505         up->interrupt_mask0 |= SAB82532_ISR0_TCD;
 506         writeb(up->interrupt_mask1, &up->regs->w.imr0);
 507 }
 508
 509 /* port->lock held by caller.  */
 510 static void sunsab_enable_ms(struct uart_port *port)
 511 {
 512         /* For now we always receive these interrupts.  */
 513 }
 514
 515 /* port->lock is not held.  */
 516 static void sunsab_break_ctl(struct uart_port *port, int break_state)
 517 {
 518         struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
 519         unsigned long flags;
 520         unsigned char val;
 521
 522         spin_lock_irqsave(&up->port.lock, flags);
 523
 524         val = up->cached_dafo;
 525         if (break_state)
 526                 val |= SAB82532_DAFO_XBRK;
 527         else
 528                 val &= ~SAB82532_DAFO_XBRK;
 529         up->cached_dafo = val;
 530
 531         set_bit(SAB82532_REGS_PENDING, &up->irqflags);
 532         if (test_bit(SAB82532_XPR, &up->irqflags))
 533                 sunsab_tx_idle(up);
 534
 535         spin_unlock_irqrestore(&up->port.lock, flags);
 536 }
 537
 538 /* port->lock is not held.  */
 539 static int sunsab_startup(struct uart_port *port)
 540 {
 541         struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
 542         unsigned long flags;
 543         unsigned char tmp;
 544
 545         spin_lock_irqsave(&up->port.lock, flags);
 546
 547         /*
 548          * Wait for any commands or immediate characters
 549          */
 550         sunsab_cec_wait(up);
 551         sunsab_tec_wait(up);
 552
 553         /*
 554          * Clear the FIFO buffers.
 555          */
 556         writeb(SAB82532_CMDR_RRES, &up->regs->w.cmdr);
 557         sunsab_cec_wait(up);
 558         writeb(SAB82532_CMDR_XRES, &up->regs->w.cmdr);
 559
 560         /*
 561          * Clear the interrupt registers.
 562          */
 563         (void) readb(&up->regs->r.isr0);
 564         (void) readb(&up->regs->r.isr1);
 565
 566         /*
 567          * Now, initialize the UART
 568          */
 569         writeb(0, &up->regs->w.ccr0);                           /* power-down */
 570         writeb(SAB82532_CCR0_MCE | SAB82532_CCR0_SC_NRZ |
 571                SAB82532_CCR0_SM_ASYNC, &up->regs->w.ccr0);
 572         writeb(SAB82532_CCR1_ODS | SAB82532_CCR1_BCR | 7, &up->regs->w.ccr1);
 573         writeb(SAB82532_CCR2_BDF | SAB82532_CCR2_SSEL |
 574                SAB82532_CCR2_TOE, &up->regs->w.ccr2);
 575         writeb(0, &up->regs->w.ccr3);
 576         writeb(SAB82532_CCR4_MCK4 | SAB82532_CCR4_EBRG, &up->regs->w.ccr4);
 577         up->cached_mode = (SAB82532_MODE_RTS | SAB82532_MODE_FCTS |
 578                            SAB82532_MODE_RAC);
 579         writeb(up->cached_mode, &up->regs->w.mode);
 580         writeb(SAB82532_RFC_DPS|SAB82532_RFC_RFTH_32, &up->regs->w.rfc);
 581
 582         tmp = readb(&up->regs->rw.ccr0);
 583         tmp |= SAB82532_CCR0_PU;        /* power-up */
 584         writeb(tmp, &up->regs->rw.ccr0);
 585
 586         /*
 587          * Finally, enable interrupts
 588          */
 589         up->interrupt_mask0 = (SAB82532_IMR0_PERR | SAB82532_IMR0_FERR |
 590                                SAB82532_IMR0_PLLA);
 591         writeb(up->interrupt_mask0, &up->regs->w.imr0);
 592         up->interrupt_mask1 = (SAB82532_IMR1_BRKT | SAB82532_IMR1_ALLS |
 593                                SAB82532_IMR1_XOFF | SAB82532_IMR1_TIN |
 594                                SAB82532_IMR1_CSC | SAB82532_IMR1_XON |
 595                                SAB82532_IMR1_XPR);
 596         writeb(up->interrupt_mask1, &up->regs->w.imr1);
 597         set_bit(SAB82532_ALLS, &up->irqflags);
 598         set_bit(SAB82532_XPR, &up->irqflags);
 599
 600         spin_unlock_irqrestore(&up->port.lock, flags);
 601
 602         return 0;
 603 }
 604
 605 /* port->lock is not held.  */
 606 static void sunsab_shutdown(struct uart_port *port)
 607 {
 608         struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
 609         unsigned long flags;
 610
 611         spin_lock_irqsave(&up->port.lock, flags);
 612
 613         /* Disable Interrupts */
 614         up->interrupt_mask0 = 0xff;
 615         writeb(up->interrupt_mask0, &up->regs->w.imr0);
 616         up->interrupt_mask1 = 0xff;
 617         writeb(up->interrupt_mask1, &up->regs->w.imr1);
 618
 619         /* Disable break condition */
 620         up->cached_dafo = readb(&up->regs->rw.dafo);
 621         up->cached_dafo &= ~SAB82532_DAFO_XBRK;
 622         writeb(up->cached_dafo, &up->regs->rw.dafo);
 623
 624         /* Disable Receiver */
 625         up->cached_mode &= ~SAB82532_MODE_RAC;
 626         writeb(up->cached_mode, &up->regs->rw.mode);
 627
 628         /*
 629          * XXX FIXME
 630          *
 631          * If the chip is powered down here the system hangs/crashes during
 632          * reboot or shutdown.  This needs to be investigated further,
 633          * similar behaviour occurs in 2.4 when the driver is configured
 634          * as a module only.  One hint may be that data is sometimes
 635          * transmitted at 9600 baud during shutdown (regardless of the
 636          * speed the chip was configured for when the port was open).
 637          */
 638 #if 0
 639         /* Power Down */
 640         tmp = readb(&up->regs->rw.ccr0);
 641         tmp &= ~SAB82532_CCR0_PU;
 642         writeb(tmp, &up->regs->rw.ccr0);
 643 #endif
 644
 645         spin_unlock_irqrestore(&up->port.lock, flags);
 646 }
 647
 648 /*
 649  * This is used to figure out the divisor speeds.
 650  *
 651  * The formula is:    Baud = SAB_BASE_BAUD / ((N + 1) * (1 << M)),
 652  *
 653  * with               0 <= N < 64 and 0 <= M < 16
 654  */
 655
 656 static void calc_ebrg(int baud, int *n_ret, int *m_ret)
 657 {
 658         int     n, m;
 659
 660         if (baud == 0) {
 661                 *n_ret = 0;
 662                 *m_ret = 0;
 663                 return;
 664         }
 665
 666         /*
 667          * We scale numbers by 10 so that we get better accuracy
 668          * without having to use floating point.  Here we increment m
 669          * until n is within the valid range.
 670          */
 671         n = (SAB_BASE_BAUD * 10) / baud;
 672         m = 0;
 673         while (n >= 640) {
 674                 n = n / 2;
 675                 m++;
 676         }
 677         n = (n+5) / 10;
 678         /*
 679          * We try very hard to avoid speeds with M == 0 since they may
 680          * not work correctly for XTAL frequences above 10 MHz.
 681          */
 682         if ((m == 0) && ((n & 1) == 0)) {
 683                 n = n / 2;
 684                 m++;
 685         }
 686         *n_ret = n - 1;
 687         *m_ret = m;
 688 }
 689
 690 /* Internal routine, port->lock is held and local interrupts are disabled.  */
 691 static void sunsab_convert_to_sab(struct uart_sunsab_port *up, unsigned int cflag,
 692                                   unsigned int iflag, unsigned int baud,
 693                                   unsigned int quot)
 694 {
 695         unsigned char dafo;
 696         int bits, n, m;
 697
 698         /* Byte size and parity */
 699         switch (cflag & CSIZE) {
 700               case CS5: dafo = SAB82532_DAFO_CHL5; bits = 7; break;
 701               case CS6: dafo = SAB82532_DAFO_CHL6; bits = 8; break;
 702               case CS7: dafo = SAB82532_DAFO_CHL7; bits = 9; break;
 703               case CS8: dafo = SAB82532_DAFO_CHL8; bits = 10; break;
 704               /* Never happens, but GCC is too dumb to figure it out */
 705               default:  dafo = SAB82532_DAFO_CHL5; bits = 7; break;
 706         }
 707
 708         if (cflag & CSTOPB) {
 709                 dafo |= SAB82532_DAFO_STOP;
 710                 bits++;
 711         }
 712
 713         if (cflag & PARENB) {
 714                 dafo |= SAB82532_DAFO_PARE;
 715                 bits++;
 716         }
 717
 718         if (cflag & PARODD) {
 719                 dafo |= SAB82532_DAFO_PAR_ODD;
 720         } else {
 721                 dafo |= SAB82532_DAFO_PAR_EVEN;
 722         }
 723         up->cached_dafo = dafo;
 724
 725         calc_ebrg(baud, &n, &m);
 726
 727         up->cached_ebrg = n | (m << 6);
 728
 729         up->tec_timeout = (10 * 1000000) / baud;
 730         up->cec_timeout = up->tec_timeout >> 2;
 731
 732         /* CTS flow control flags */
 733         /* We encode read_status_mask and ignore_status_mask like so:
 734          *
 735          * ---------------------
 736          * | ... | ISR1 | ISR0 |
 737          * ---------------------
 738          *  ..    15   8 7    0
 739          */
 740
 741         up->port.read_status_mask = (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME |
 742                                      SAB82532_ISR0_RFO | SAB82532_ISR0_RPF |
 743                                      SAB82532_ISR0_CDSC);
 744         up->port.read_status_mask |= (SAB82532_ISR1_CSC |
 745                                       SAB82532_ISR1_ALLS |
 746                                       SAB82532_ISR1_XPR) << 8;
 747         if (iflag & INPCK)
 748                 up->port.read_status_mask |= (SAB82532_ISR0_PERR |
 749                                               SAB82532_ISR0_FERR);
 750         if (iflag & (BRKINT | PARMRK))
 751                 up->port.read_status_mask |= (SAB82532_ISR1_BRK << 8);
 752
 753         /*
 754          * Characteres to ignore
 755          */
 756         up->port.ignore_status_mask = 0;
 757         if (iflag & IGNPAR)
 758                 up->port.ignore_status_mask |= (SAB82532_ISR0_PERR |
 759                                                 SAB82532_ISR0_FERR);
 760         if (iflag & IGNBRK) {
 761                 up->port.ignore_status_mask |= (SAB82532_ISR1_BRK << 8);
 762                 /*
 763                  * If we're ignoring parity and break indicators,
 764                  * ignore overruns too (for real raw support).
 765                  */
 766                 if (iflag & IGNPAR)
 767                         up->port.ignore_status_mask |= SAB82532_ISR0_RFO;
 768         }
 769
 770         /*
 771          * ignore all characters if CREAD is not set
 772          */
 773         if ((cflag & CREAD) == 0)
 774                 up->port.ignore_status_mask |= (SAB82532_ISR0_RPF |
 775                                                 SAB82532_ISR0_TCD);
 776
 777         uart_update_timeout(&up->port, cflag,
 778                             (up->port.uartclk / (16 * quot)));
 779
 780         /* Now schedule a register update when the chip's
 781          * transmitter is idle.
 782          */
 783         up->cached_mode |= SAB82532_MODE_RAC;
 784         set_bit(SAB82532_REGS_PENDING, &up->irqflags);
 785         if (test_bit(SAB82532_XPR, &up->irqflags))
 786                 sunsab_tx_idle(up);
 787 }
 788
 789 /* port->lock is not held.  */
 790 static void sunsab_set_termios(struct uart_port *port, struct termios *termios,
 791                                struct termios *old)
 792 {
 793         struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
 794         unsigned long flags;
 795         unsigned int baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
 796         unsigned int quot = uart_get_divisor(port, baud);
 797
 798         spin_lock_irqsave(&up->port.lock, flags);
 799         sunsab_convert_to_sab(up, termios->c_cflag, termios->c_iflag, baud, quot);
 800         spin_unlock_irqrestore(&up->port.lock, flags);
 801 }
 802
 803 static const char *sunsab_type(struct uart_port *port)
 804 {
 805         struct uart_sunsab_port *up = (void *)port;
 806         static char buf[36];
 807
 808         sprintf(buf, "SAB82532 %s", sab82532_version[up->type]);
 809         return buf;
 810 }
 811
 812 static void sunsab_release_port(struct uart_port *port)
 813 {
 814 }
 815
 816 static int sunsab_request_port(struct uart_port *port)
 817 {
 818         return 0;
 819 }
 820
 821 static void sunsab_config_port(struct uart_port *port, int flags)
 822 {
 823 }
 824
 825 static int sunsab_verify_port(struct uart_port *port, struct serial_struct *ser)
 826 {
 827         return -EINVAL;
 828 }
 829
 830 static struct uart_ops sunsab_pops = {
 831         .tx_empty       = sunsab_tx_empty,
 832         .set_mctrl      = sunsab_set_mctrl,
 833         .get_mctrl      = sunsab_get_mctrl,
 834         .stop_tx        = sunsab_stop_tx,
 835         .start_tx       = sunsab_start_tx,
 836         .send_xchar     = sunsab_send_xchar,
 837         .stop_rx        = sunsab_stop_rx,
 838         .enable_ms      = sunsab_enable_ms,
 839         .break_ctl      = sunsab_break_ctl,
 840         .startup        = sunsab_startup,
 841         .shutdown       = sunsab_shutdown,
 842         .set_termios    = sunsab_set_termios,
 843         .type           = sunsab_type,
 844         .release_port   = sunsab_release_port,
 845         .request_port   = sunsab_request_port,
 846         .config_port    = sunsab_config_port,
 847         .verify_port    = sunsab_verify_port,
 848 };
 849
 850 static struct uart_driver sunsab_reg = {
 851         .owner                  = THIS_MODULE,
 852         .driver_name            = "serial",
 853         .dev_name               = "ttyS",
 854         .major                  = TTY_MAJOR,
 855 };
 856
 857 static struct uart_sunsab_port *sunsab_ports;
 858 static int num_channels;
 859
 860 #ifdef CONFIG_SERIAL_SUNSAB_CONSOLE
 861
 862 static void sunsab_console_putchar(struct uart_port *port, int c)
 863 {
 864         struct uart_sunsab_port *up = (struct uart_sunsab_port *)port;
 865         unsigned long flags;
 866
 867         spin_lock_irqsave(&up->port.lock, flags);
 868
 869         sunsab_tec_wait(up);
 870         writeb(c, &up->regs->w.tic);
 871
 872         spin_unlock_irqrestore(&up->port.lock, flags);
 873 }
 874
 875 static void sunsab_console_write(struct console *con, const char *s, unsigned n)
 876 {
 877         struct uart_sunsab_port *up = &sunsab_ports[con->index];
 878
 879         uart_console_write(&up->port, s, n, sunsab_console_putchar);
 880         sunsab_tec_wait(up);
 881 }
 882
 883 static int sunsab_console_setup(struct console *con, char *options)
 884 {
 885         struct uart_sunsab_port *up = &sunsab_ports[con->index];
 886         unsigned long flags;
 887         unsigned int baud, quot;
 888
 889         /*
 890          * The console framework calls us for each and every port
 891          * registered. Defer the console setup until the requested
 892          * port has been properly discovered. A bit of a hack,
 893          * though...
 894          */
 895         if (up->port.type != PORT_SUNSAB)
 896                 return -1;
 897
 898         printk("Console: ttyS%d (SAB82532)\n",
 899                (sunsab_reg.minor - 64) + con->index);
 900
 901         sunserial_console_termios(con);
 902
 903         switch (con->cflag & CBAUD) {
 904         case B150: baud = 150; break;
 905         case B300: baud = 300; break;
 906         case B600: baud = 600; break;
 907         case B1200: baud = 1200; break;
 908         case B2400: baud = 2400; break;
 909         case B4800: baud = 4800; break;
 910         default: case B9600: baud = 9600; break;
 911         case B19200: baud = 19200; break;
 912         case B38400: baud = 38400; break;
 913         case B57600: baud = 57600; break;
 914         case B115200: baud = 115200; break;
 915         case B230400: baud = 230400; break;
 916         case B460800: baud = 460800; break;
 917         };
 918
 919         /*
 920          * Temporary fix.
 921          */
 922         spin_lock_init(&up->port.lock);
 923
 924         /*
 925          * Initialize the hardware
 926          */
 927         sunsab_startup(&up->port);
 928
 929         spin_lock_irqsave(&up->port.lock, flags);
 930
 931         /*
 932          * Finally, enable interrupts
 933          */
 934         up->interrupt_mask0 = SAB82532_IMR0_PERR | SAB82532_IMR0_FERR |
 935                                 SAB82532_IMR0_PLLA | SAB82532_IMR0_CDSC;
 936         writeb(up->interrupt_mask0, &up->regs->w.imr0);
 937         up->interrupt_mask1 = SAB82532_IMR1_BRKT | SAB82532_IMR1_ALLS |
 938                                 SAB82532_IMR1_XOFF | SAB82532_IMR1_TIN |
 939                                 SAB82532_IMR1_CSC | SAB82532_IMR1_XON |
 940                                 SAB82532_IMR1_XPR;
 941         writeb(up->interrupt_mask1, &up->regs->w.imr1);
 942
 943         quot = uart_get_divisor(&up->port, baud);
 944         sunsab_convert_to_sab(up, con->cflag, 0, baud, quot);
 945         sunsab_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS);
 946
 947         spin_unlock_irqrestore(&up->port.lock, flags);
 948
 949         return 0;
 950 }
 951
 952 static struct console sunsab_console = {
 953         .name   =       "ttyS",
 954         .write  =       sunsab_console_write,
 955         .device =       uart_console_device,
 956         .setup  =       sunsab_console_setup,
 957         .flags  =       CON_PRINTBUFFER,
 958         .index  =       -1,
 959         .data   =       &sunsab_reg,
 960 };
 961
 962 static inline struct console *SUNSAB_CONSOLE(void)
 963 {
 964         int i;
 965
 966         if (con_is_present())
 967                 return NULL;
 968
 969         for (i = 0; i < num_channels; i++) {
 970                 int this_minor = sunsab_reg.minor + i;
 971
 972                 if ((this_minor - 64) == (serial_console - 1))
 973                         break;
 974         }
 975         if (i == num_channels)
 976                 return NULL;
 977
 978         sunsab_console.index = i;
 979
 980         return &sunsab_console;
 981 }
 982 #else
 983 #define SUNSAB_CONSOLE()        (NULL)
 984 #define sunsab_console_init()   do { } while (0)
 985 #endif
 986
 987 static int __devinit sunsab_init_one(struct uart_sunsab_port *up,
 988                                      struct of_device *op,
 989                                      unsigned long offset,
 990                                      int line)
 991 {
 992         up->port.line = line;
 993         up->port.dev = &op->dev;
 994
 995         up->port.mapbase = op->resource[0].start + offset;
 996         up->port.membase = of_ioremap(&op->resource[0], offset,
 997                                       sizeof(union sab82532_async_regs),
 998                                       "sab");
 999         if (!up->port.membase)
1000                 return -ENOMEM;
1001         up->regs = (union sab82532_async_regs __iomem *) up->port.membase;
1002
1003         up->port.irq = op->irqs[0];
1004
1005         up->port.fifosize = SAB82532_XMIT_FIFO_SIZE;
1006         up->port.iotype = UPIO_MEM;
1007
1008         writeb(SAB82532_IPC_IC_ACT_LOW, &up->regs->w.ipc);
1009
1010         up->port.ops = &sunsab_pops;
1011         up->port.type = PORT_SUNSAB;
1012         up->port.uartclk = SAB_BASE_BAUD;
1013
1014         up->type = readb(&up->regs->r.vstr) & 0x0f;
1015         writeb(~((1 << 1) | (1 << 2) | (1 << 4)), &up->regs->w.pcr);
1016         writeb(0xff, &up->regs->w.pim);
1017         if ((up->port.line & 0x1) == 0) {
1018                 up->pvr_dsr_bit = (1 << 0);
1019                 up->pvr_dtr_bit = (1 << 1);
1020         } else {
1021                 up->pvr_dsr_bit = (1 << 3);
1022                 up->pvr_dtr_bit = (1 << 2);
1023         }
1024         up->cached_pvr = (1 << 1) | (1 << 2) | (1 << 4);
1025         writeb(up->cached_pvr, &up->regs->w.pvr);
1026         up->cached_mode = readb(&up->regs->rw.mode);
1027         up->cached_mode |= SAB82532_MODE_FRTS;
1028         writeb(up->cached_mode, &up->regs->rw.mode);
1029         up->cached_mode |= SAB82532_MODE_RTS;
1030         writeb(up->cached_mode, &up->regs->rw.mode);
1031
1032         up->tec_timeout = SAB82532_MAX_TEC_TIMEOUT;
1033         up->cec_timeout = SAB82532_MAX_CEC_TIMEOUT;
1034
1035         if (!(up->port.line & 0x01)) {
1036                 int err;
1037
1038                 err = request_irq(up->port.irq, sunsab_interrupt,
1039                                   IRQF_SHARED, "sab", up);
1040                 if (err) {
1041                         of_iounmap(up->port.membase,
1042                                    sizeof(union sab82532_async_regs));
1043                         return err;
1044                 }
1045         }
1046
1047         return 0;
1048 }
1049
1050 static int __devinit sab_probe(struct of_device *op, const struct of_device_id *match)
1051 {
1052         static int inst;
1053         struct uart_sunsab_port *up;
1054         int err;
1055
1056         up = &sunsab_ports[inst * 2];
1057
1058         err = sunsab_init_one(&up[0], op,
1059                               0,
1060                               (inst * 2) + 0);
1061         if (err)
1062                 return err;
1063
1064         err = sunsab_init_one(&up[1], op,
1065                               sizeof(union sab82532_async_regs),
1066                               (inst * 2) + 1);
1067         if (err) {
1068                 of_iounmap(up[0].port.membase,
1069                            sizeof(union sab82532_async_regs));
1070                 free_irq(up[0].port.irq, &up[0]);
1071                 return err;
1072         }
1073
1074         uart_add_one_port(&sunsab_reg, &up[0].port);
1075         uart_add_one_port(&sunsab_reg, &up[1].port);
1076
1077         dev_set_drvdata(&op->dev, &up[0]);
1078
1079         inst++;
1080
1081         return 0;
1082 }
1083
1084 static void __devexit sab_remove_one(struct uart_sunsab_port *up)
1085 {
1086         uart_remove_one_port(&sunsab_reg, &up->port);
1087         if (!(up->port.line & 1))
1088                 free_irq(up->port.irq, up);
1089         of_iounmap(up->port.membase,
1090                    sizeof(union sab82532_async_regs));
1091 }
1092
1093 static int __devexit sab_remove(struct of_device *op)
1094 {
1095         struct uart_sunsab_port *up = dev_get_drvdata(&op->dev);
1096
1097         sab_remove_one(&up[0]);
1098         sab_remove_one(&up[1]);
1099
1100         dev_set_drvdata(&op->dev, NULL);
1101
1102         return 0;
1103 }
1104
1105 static struct of_device_id sab_match[] = {
1106         {
1107                 .name = "se",
1108         },
1109         {
1110                 .name = "serial",
1111                 .compatible = "sab82532",
1112         },
1113         {},
1114 };
1115 MODULE_DEVICE_TABLE(of, sab_match);
1116
1117 static struct of_platform_driver sab_driver = {
1118         .name           = "sab",
1119         .match_table    = sab_match,
1120         .probe          = sab_probe,
1121         .remove         = __devexit_p(sab_remove),
1122 };
1123
1124 static int __init sunsab_init(void)
1125 {
1126         struct device_node *dp;
1127         int err;
1128
1129         num_channels = 0;
1130         for_each_node_by_name(dp, "se")
1131                 num_channels += 2;
1132         for_each_node_by_name(dp, "serial") {
1133                 if (of_device_is_compatible(dp, "sab82532"))
1134                         num_channels += 2;
1135         }
1136
1137         if (num_channels) {
1138                 sunsab_ports = kzalloc(sizeof(struct uart_sunsab_port) *
1139                                        num_channels, GFP_KERNEL);
1140                 if (!sunsab_ports)
1141                         return -ENOMEM;
1142
1143                 sunsab_reg.minor = sunserial_current_minor;
1144                 sunsab_reg.nr = num_channels;
1145
1146                 err = uart_register_driver(&sunsab_reg);
1147                 if (err) {
1148                         kfree(sunsab_ports);
1149                         sunsab_ports = NULL;
1150
1151                         return err;
1152                 }
1153
1154                 sunsab_reg.tty_driver->name_base = sunsab_reg.minor - 64;
1155                 sunsab_reg.cons = SUNSAB_CONSOLE();
1156                 sunserial_current_minor += num_channels;
1157         }
1158
1159         return of_register_driver(&sab_driver, &of_bus_type);
1160 }
1161
1162 static void __exit sunsab_exit(void)
1163 {
1164         of_unregister_driver(&sab_driver);
1165         if (num_channels) {
1166                 sunserial_current_minor -= num_channels;
1167                 uart_unregister_driver(&sunsab_reg);
1168         }
1169
1170         kfree(sunsab_ports);
1171         sunsab_ports = NULL;
1172 }
1173
1174 module_init(sunsab_init);
1175 module_exit(sunsab_exit);
1176
1177 MODULE_AUTHOR("Eddie C. Dost and David S. Miller");
1178 MODULE_DESCRIPTION("Sun SAB82532 serial port driver");
1179 MODULE_LICENSE("GPL");