git.oblomov.eu Git - linux-2.6/blob - drivers/char/vme_scc.c

   1 /*
   2  * drivers/char/vme_scc.c: MVME147, MVME162, BVME6000 SCC serial ports
   3  * implementation.
   4  * Copyright 1999 Richard Hirst <richard@sleepie.demon.co.uk>
   5  *
   6  * Based on atari_SCC.c which was
   7  *   Copyright 1994-95 Roman Hodek <Roman.Hodek@informatik.uni-erlangen.de>
   8  *   Partially based on PC-Linux serial.c by Linus Torvalds and Theodore Ts'o
   9  *
  10  * This file is subject to the terms and conditions of the GNU General Public
  11  * License.  See the file COPYING in the main directory of this archive
  12  * for more details.
  13  *
  14  */
  15
  16 #include <linux/module.h>
  17 #include <linux/kdev_t.h>
  18 #include <asm/io.h>
  19 #include <linux/kernel.h>
  20 #include <linux/sched.h>
  21 #include <linux/ioport.h>
  22 #include <linux/interrupt.h>
  23 #include <linux/errno.h>
  24 #include <linux/tty.h>
  25 #include <linux/tty_flip.h>
  26 #include <linux/mm.h>
  27 #include <linux/serial.h>
  28 #include <linux/fcntl.h>
  29 #include <linux/major.h>
  30 #include <linux/delay.h>
  31 #include <linux/slab.h>
  32 #include <linux/miscdevice.h>
  33 #include <linux/console.h>
  34 #include <linux/init.h>
  35 #include <asm/setup.h>
  36 #include <asm/bootinfo.h>
  37
  38 #ifdef CONFIG_MVME147_SCC
  39 #include <asm/mvme147hw.h>
  40 #endif
  41 #ifdef CONFIG_MVME162_SCC
  42 #include <asm/mvme16xhw.h>
  43 #endif
  44 #ifdef CONFIG_BVME6000_SCC
  45 #include <asm/bvme6000hw.h>
  46 #endif
  47
  48 #include <linux/generic_serial.h>
  49 #include "scc.h"
  50
  51
  52 #define CHANNEL_A       0
  53 #define CHANNEL_B       1
  54
  55 #define SCC_MINOR_BASE  64
  56
  57 /* Shadows for all SCC write registers */
  58 static unsigned char scc_shadow[2][16];
  59
  60 /* Location to access for SCC register access delay */
  61 static volatile unsigned char *scc_del = NULL;
  62
  63 /* To keep track of STATUS_REG state for detection of Ext/Status int source */
  64 static unsigned char scc_last_status_reg[2];
  65
  66 /***************************** Prototypes *****************************/
  67
  68 /* Function prototypes */
  69 static void scc_disable_tx_interrupts(void * ptr);
  70 static void scc_enable_tx_interrupts(void * ptr);
  71 static void scc_disable_rx_interrupts(void * ptr);
  72 static void scc_enable_rx_interrupts(void * ptr);
  73 static int  scc_get_CD(void * ptr);
  74 static void scc_shutdown_port(void * ptr);
  75 static int scc_set_real_termios(void  *ptr);
  76 static void scc_hungup(void  *ptr);
  77 static void scc_close(void  *ptr);
  78 static int scc_chars_in_buffer(void * ptr);
  79 static int scc_open(struct tty_struct * tty, struct file * filp);
  80 static int scc_ioctl(struct tty_struct * tty, struct file * filp,
  81                      unsigned int cmd, unsigned long arg);
  82 static void scc_throttle(struct tty_struct *tty);
  83 static void scc_unthrottle(struct tty_struct *tty);
  84 static irqreturn_t scc_tx_int(int irq, void *data);
  85 static irqreturn_t scc_rx_int(int irq, void *data);
  86 static irqreturn_t scc_stat_int(int irq, void *data);
  87 static irqreturn_t scc_spcond_int(int irq, void *data);
  88 static void scc_setsignals(struct scc_port *port, int dtr, int rts);
  89 static void scc_break_ctl(struct tty_struct *tty, int break_state);
  90
  91 static struct tty_driver *scc_driver;
  92
  93 struct scc_port scc_ports[2];
  94
  95 int scc_initialized = 0;
  96
  97 /*---------------------------------------------------------------------------
  98  * Interface from generic_serial.c back here
  99  *--------------------------------------------------------------------------*/
 100
 101 static struct real_driver scc_real_driver = {
 102         scc_disable_tx_interrupts,
 103         scc_enable_tx_interrupts,
 104         scc_disable_rx_interrupts,
 105         scc_enable_rx_interrupts,
 106         scc_get_CD,
 107         scc_shutdown_port,
 108         scc_set_real_termios,
 109         scc_chars_in_buffer,
 110         scc_close,
 111         scc_hungup,
 112         NULL
 113 };
 114
 115
 116 static const struct tty_operations scc_ops = {
 117         .open   = scc_open,
 118         .close = gs_close,
 119         .write = gs_write,
 120         .put_char = gs_put_char,
 121         .flush_chars = gs_flush_chars,
 122         .write_room = gs_write_room,
 123         .chars_in_buffer = gs_chars_in_buffer,
 124         .flush_buffer = gs_flush_buffer,
 125         .ioctl = scc_ioctl,
 126         .throttle = scc_throttle,
 127         .unthrottle = scc_unthrottle,
 128         .set_termios = gs_set_termios,
 129         .stop = gs_stop,
 130         .start = gs_start,
 131         .hangup = gs_hangup,
 132         .break_ctl = scc_break_ctl,
 133 };
 134
 135 /*----------------------------------------------------------------------------
 136  * vme_scc_init() and support functions
 137  *---------------------------------------------------------------------------*/
 138
 139 static int scc_init_drivers(void)
 140 {
 141         int error;
 142
 143         scc_driver = alloc_tty_driver(2);
 144         if (!scc_driver)
 145                 return -ENOMEM;
 146         scc_driver->owner = THIS_MODULE;
 147         scc_driver->driver_name = "scc";
 148         scc_driver->name = "ttyS";
 149         scc_driver->major = TTY_MAJOR;
 150         scc_driver->minor_start = SCC_MINOR_BASE;
 151         scc_driver->type = TTY_DRIVER_TYPE_SERIAL;
 152         scc_driver->subtype = SERIAL_TYPE_NORMAL;
 153         scc_driver->init_termios = tty_std_termios;
 154         scc_driver->init_termios.c_cflag =
 155           B9600 | CS8 | CREAD | HUPCL | CLOCAL;
 156         scc_driver->flags = TTY_DRIVER_REAL_RAW;
 157         tty_set_operations(scc_driver, &scc_ops);
 158
 159         if ((error = tty_register_driver(scc_driver))) {
 160                 printk(KERN_ERR "scc: Couldn't register scc driver, error = %d\n",
 161                        error);
 162                 put_tty_driver(scc_driver);
 163                 return 1;
 164         }
 165
 166         return 0;
 167 }
 168
 169
 170 /* ports[] array is indexed by line no (i.e. [0] for ttyS0, [1] for ttyS1).
 171  */
 172
 173 static void scc_init_portstructs(void)
 174 {
 175         struct scc_port *port;
 176         int i;
 177
 178         for (i = 0; i < 2; i++) {
 179                 port = scc_ports + i;
 180                 port->gs.magic = SCC_MAGIC;
 181                 port->gs.close_delay = HZ/2;
 182                 port->gs.closing_wait = 30 * HZ;
 183                 port->gs.rd = &scc_real_driver;
 184 #ifdef NEW_WRITE_LOCKING
 185                 port->gs.port_write_mutex = MUTEX;
 186 #endif
 187                 init_waitqueue_head(&port->gs.open_wait);
 188                 init_waitqueue_head(&port->gs.close_wait);
 189         }
 190 }
 191
 192
 193 #ifdef CONFIG_MVME147_SCC
 194 static int mvme147_scc_init(void)
 195 {
 196         struct scc_port *port;
 197
 198         printk(KERN_INFO "SCC: MVME147 Serial Driver\n");
 199         /* Init channel A */
 200         port = &scc_ports[0];
 201         port->channel = CHANNEL_A;
 202         port->ctrlp = (volatile unsigned char *)M147_SCC_A_ADDR;
 203         port->datap = port->ctrlp + 1;
 204         port->port_a = &scc_ports[0];
 205         port->port_b = &scc_ports[1];
 206         request_irq(MVME147_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED,
 207                             "SCC-A TX", port);
 208         request_irq(MVME147_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED,
 209                             "SCC-A status", port);
 210         request_irq(MVME147_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED,
 211                             "SCC-A RX", port);
 212         request_irq(MVME147_IRQ_SCCA_SPCOND, scc_spcond_int, IRQF_DISABLED,
 213                             "SCC-A special cond", port);
 214         {
 215                 SCC_ACCESS_INIT(port);
 216
 217                 /* disable interrupts for this channel */
 218                 SCCwrite(INT_AND_DMA_REG, 0);
 219                 /* Set the interrupt vector */
 220                 SCCwrite(INT_VECTOR_REG, MVME147_IRQ_SCC_BASE);
 221                 /* Interrupt parameters: vector includes status, status low */
 222                 SCCwrite(MASTER_INT_CTRL, MIC_VEC_INCL_STAT);
 223                 SCCmod(MASTER_INT_CTRL, 0xff, MIC_MASTER_INT_ENAB);
 224         }
 225
 226         /* Init channel B */
 227         port = &scc_ports[1];
 228         port->channel = CHANNEL_B;
 229         port->ctrlp = (volatile unsigned char *)M147_SCC_B_ADDR;
 230         port->datap = port->ctrlp + 1;
 231         port->port_a = &scc_ports[0];
 232         port->port_b = &scc_ports[1];
 233         request_irq(MVME147_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED,
 234                             "SCC-B TX", port);
 235         request_irq(MVME147_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED,
 236                             "SCC-B status", port);
 237         request_irq(MVME147_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED,
 238                             "SCC-B RX", port);
 239         request_irq(MVME147_IRQ_SCCB_SPCOND, scc_spcond_int, IRQF_DISABLED,
 240                             "SCC-B special cond", port);
 241         {
 242                 SCC_ACCESS_INIT(port);
 243
 244                 /* disable interrupts for this channel */
 245                 SCCwrite(INT_AND_DMA_REG, 0);
 246         }
 247
 248         /* Ensure interrupts are enabled in the PCC chip */
 249         m147_pcc->serial_cntrl=PCC_LEVEL_SERIAL|PCC_INT_ENAB;
 250
 251         /* Initialise the tty driver structures and register */
 252         scc_init_portstructs();
 253         scc_init_drivers();
 254
 255         return 0;
 256 }
 257 #endif
 258
 259
 260 #ifdef CONFIG_MVME162_SCC
 261 static int mvme162_scc_init(void)
 262 {
 263         struct scc_port *port;
 264
 265         if (!(mvme16x_config & MVME16x_CONFIG_GOT_SCCA))
 266                 return (-ENODEV);
 267
 268         printk(KERN_INFO "SCC: MVME162 Serial Driver\n");
 269         /* Init channel A */
 270         port = &scc_ports[0];
 271         port->channel = CHANNEL_A;
 272         port->ctrlp = (volatile unsigned char *)MVME_SCC_A_ADDR;
 273         port->datap = port->ctrlp + 2;
 274         port->port_a = &scc_ports[0];
 275         port->port_b = &scc_ports[1];
 276         request_irq(MVME162_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED,
 277                             "SCC-A TX", port);
 278         request_irq(MVME162_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED,
 279                             "SCC-A status", port);
 280         request_irq(MVME162_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED,
 281                             "SCC-A RX", port);
 282         request_irq(MVME162_IRQ_SCCA_SPCOND, scc_spcond_int, IRQF_DISABLED,
 283                             "SCC-A special cond", port);
 284         {
 285                 SCC_ACCESS_INIT(port);
 286
 287                 /* disable interrupts for this channel */
 288                 SCCwrite(INT_AND_DMA_REG, 0);
 289                 /* Set the interrupt vector */
 290                 SCCwrite(INT_VECTOR_REG, MVME162_IRQ_SCC_BASE);
 291                 /* Interrupt parameters: vector includes status, status low */
 292                 SCCwrite(MASTER_INT_CTRL, MIC_VEC_INCL_STAT);
 293                 SCCmod(MASTER_INT_CTRL, 0xff, MIC_MASTER_INT_ENAB);
 294         }
 295
 296         /* Init channel B */
 297         port = &scc_ports[1];
 298         port->channel = CHANNEL_B;
 299         port->ctrlp = (volatile unsigned char *)MVME_SCC_B_ADDR;
 300         port->datap = port->ctrlp + 2;
 301         port->port_a = &scc_ports[0];
 302         port->port_b = &scc_ports[1];
 303         request_irq(MVME162_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED,
 304                             "SCC-B TX", port);
 305         request_irq(MVME162_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED,
 306                             "SCC-B status", port);
 307         request_irq(MVME162_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED,
 308                             "SCC-B RX", port);
 309         request_irq(MVME162_IRQ_SCCB_SPCOND, scc_spcond_int, IRQF_DISABLED,
 310                             "SCC-B special cond", port);
 311
 312         {
 313                 SCC_ACCESS_INIT(port);  /* Either channel will do */
 314
 315                 /* disable interrupts for this channel */
 316                 SCCwrite(INT_AND_DMA_REG, 0);
 317         }
 318
 319         /* Ensure interrupts are enabled in the MC2 chip */
 320         *(volatile char *)0xfff4201d = 0x14;
 321
 322         /* Initialise the tty driver structures and register */
 323         scc_init_portstructs();
 324         scc_init_drivers();
 325
 326         return 0;
 327 }
 328 #endif
 329
 330
 331 #ifdef CONFIG_BVME6000_SCC
 332 static int bvme6000_scc_init(void)
 333 {
 334         struct scc_port *port;
 335
 336         printk(KERN_INFO "SCC: BVME6000 Serial Driver\n");
 337         /* Init channel A */
 338         port = &scc_ports[0];
 339         port->channel = CHANNEL_A;
 340         port->ctrlp = (volatile unsigned char *)BVME_SCC_A_ADDR;
 341         port->datap = port->ctrlp + 4;
 342         port->port_a = &scc_ports[0];
 343         port->port_b = &scc_ports[1];
 344         request_irq(BVME_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED,
 345                             "SCC-A TX", port);
 346         request_irq(BVME_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED,
 347                             "SCC-A status", port);
 348         request_irq(BVME_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED,
 349                             "SCC-A RX", port);
 350         request_irq(BVME_IRQ_SCCA_SPCOND, scc_spcond_int, IRQF_DISABLED,
 351                             "SCC-A special cond", port);
 352         {
 353                 SCC_ACCESS_INIT(port);
 354
 355                 /* disable interrupts for this channel */
 356                 SCCwrite(INT_AND_DMA_REG, 0);
 357                 /* Set the interrupt vector */
 358                 SCCwrite(INT_VECTOR_REG, BVME_IRQ_SCC_BASE);
 359                 /* Interrupt parameters: vector includes status, status low */
 360                 SCCwrite(MASTER_INT_CTRL, MIC_VEC_INCL_STAT);
 361                 SCCmod(MASTER_INT_CTRL, 0xff, MIC_MASTER_INT_ENAB);
 362         }
 363
 364         /* Init channel B */
 365         port = &scc_ports[1];
 366         port->channel = CHANNEL_B;
 367         port->ctrlp = (volatile unsigned char *)BVME_SCC_B_ADDR;
 368         port->datap = port->ctrlp + 4;
 369         port->port_a = &scc_ports[0];
 370         port->port_b = &scc_ports[1];
 371         request_irq(BVME_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED,
 372                             "SCC-B TX", port);
 373         request_irq(BVME_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED,
 374                             "SCC-B status", port);
 375         request_irq(BVME_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED,
 376                             "SCC-B RX", port);
 377         request_irq(BVME_IRQ_SCCB_SPCOND, scc_spcond_int, IRQF_DISABLED,
 378                             "SCC-B special cond", port);
 379
 380         {
 381                 SCC_ACCESS_INIT(port);  /* Either channel will do */
 382
 383                 /* disable interrupts for this channel */
 384                 SCCwrite(INT_AND_DMA_REG, 0);
 385         }
 386
 387         /* Initialise the tty driver structures and register */
 388         scc_init_portstructs();
 389         scc_init_drivers();
 390
 391         return 0;
 392 }
 393 #endif
 394
 395
 396 static int vme_scc_init(void)
 397 {
 398         int res = -ENODEV;
 399
 400 #ifdef CONFIG_MVME147_SCC
 401         if (MACH_IS_MVME147)
 402                 res = mvme147_scc_init();
 403 #endif
 404 #ifdef CONFIG_MVME162_SCC
 405         if (MACH_IS_MVME16x)
 406                 res = mvme162_scc_init();
 407 #endif
 408 #ifdef CONFIG_BVME6000_SCC
 409         if (MACH_IS_BVME6000)
 410                 res = bvme6000_scc_init();
 411 #endif
 412         return res;
 413 }
 414
 415 module_init(vme_scc_init);
 416
 417
 418 /*---------------------------------------------------------------------------
 419  * Interrupt handlers
 420  *--------------------------------------------------------------------------*/
 421
 422 static irqreturn_t scc_rx_int(int irq, void *data)
 423 {
 424         unsigned char   ch;
 425         struct scc_port *port = data;
 426         struct tty_struct *tty = port->gs.tty;
 427         SCC_ACCESS_INIT(port);
 428
 429         ch = SCCread_NB(RX_DATA_REG);
 430         if (!tty) {
 431                 printk(KERN_WARNING "scc_rx_int with NULL tty!\n");
 432                 SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
 433                 return IRQ_HANDLED;
 434         }
 435         tty_insert_flip_char(tty, ch, 0);
 436
 437         /* Check if another character is already ready; in that case, the
 438          * spcond_int() function must be used, because this character may have an
 439          * error condition that isn't signalled by the interrupt vector used!
 440          */
 441         if (SCCread(INT_PENDING_REG) &
 442             (port->channel == CHANNEL_A ? IPR_A_RX : IPR_B_RX)) {
 443                 scc_spcond_int (irq, data);
 444                 return IRQ_HANDLED;
 445         }
 446
 447         SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
 448
 449         tty_flip_buffer_push(tty);
 450         return IRQ_HANDLED;
 451 }
 452
 453
 454 static irqreturn_t scc_spcond_int(int irq, void *data)
 455 {
 456         struct scc_port *port = data;
 457         struct tty_struct *tty = port->gs.tty;
 458         unsigned char   stat, ch, err;
 459         int             int_pending_mask = port->channel == CHANNEL_A ?
 460                                            IPR_A_RX : IPR_B_RX;
 461         SCC_ACCESS_INIT(port);
 462
 463         if (!tty) {
 464                 printk(KERN_WARNING "scc_spcond_int with NULL tty!\n");
 465                 SCCwrite(COMMAND_REG, CR_ERROR_RESET);
 466                 SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
 467                 return IRQ_HANDLED;
 468         }
 469         do {
 470                 stat = SCCread(SPCOND_STATUS_REG);
 471                 ch = SCCread_NB(RX_DATA_REG);
 472
 473                 if (stat & SCSR_RX_OVERRUN)
 474                         err = TTY_OVERRUN;
 475                 else if (stat & SCSR_PARITY_ERR)
 476                         err = TTY_PARITY;
 477                 else if (stat & SCSR_CRC_FRAME_ERR)
 478                         err = TTY_FRAME;
 479                 else
 480                         err = 0;
 481
 482                 tty_insert_flip_char(tty, ch, err);
 483
 484                 /* ++TeSche: *All* errors have to be cleared manually,
 485                  * else the condition persists for the next chars
 486                  */
 487                 if (err)
 488                   SCCwrite(COMMAND_REG, CR_ERROR_RESET);
 489
 490         } while(SCCread(INT_PENDING_REG) & int_pending_mask);
 491
 492         SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
 493
 494         tty_flip_buffer_push(tty);
 495         return IRQ_HANDLED;
 496 }
 497
 498
 499 static irqreturn_t scc_tx_int(int irq, void *data)
 500 {
 501         struct scc_port *port = data;
 502         SCC_ACCESS_INIT(port);
 503
 504         if (!port->gs.tty) {
 505                 printk(KERN_WARNING "scc_tx_int with NULL tty!\n");
 506                 SCCmod (INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0);
 507                 SCCwrite(COMMAND_REG, CR_TX_PENDING_RESET);
 508                 SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
 509                 return IRQ_HANDLED;
 510         }
 511         while ((SCCread_NB(STATUS_REG) & SR_TX_BUF_EMPTY)) {
 512                 if (port->x_char) {
 513                         SCCwrite(TX_DATA_REG, port->x_char);
 514                         port->x_char = 0;
 515                 }
 516                 else if ((port->gs.xmit_cnt <= 0) || port->gs.tty->stopped ||
 517                                 port->gs.tty->hw_stopped)
 518                         break;
 519                 else {
 520                         SCCwrite(TX_DATA_REG, port->gs.xmit_buf[port->gs.xmit_tail++]);
 521                         port->gs.xmit_tail = port->gs.xmit_tail & (SERIAL_XMIT_SIZE-1);
 522                         if (--port->gs.xmit_cnt <= 0)
 523                                 break;
 524                 }
 525         }
 526         if ((port->gs.xmit_cnt <= 0) || port->gs.tty->stopped ||
 527                         port->gs.tty->hw_stopped) {
 528                 /* disable tx interrupts */
 529                 SCCmod (INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0);
 530                 SCCwrite(COMMAND_REG, CR_TX_PENDING_RESET);   /* disable tx_int on next tx underrun? */
 531                 port->gs.flags &= ~GS_TX_INTEN;
 532         }
 533         if (port->gs.tty && port->gs.xmit_cnt <= port->gs.wakeup_chars)
 534                 tty_wakeup(port->gs.tty);
 535
 536         SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
 537         return IRQ_HANDLED;
 538 }
 539
 540
 541 static irqreturn_t scc_stat_int(int irq, void *data)
 542 {
 543         struct scc_port *port = data;
 544         unsigned channel = port->channel;
 545         unsigned char   last_sr, sr, changed;
 546         SCC_ACCESS_INIT(port);
 547
 548         last_sr = scc_last_status_reg[channel];
 549         sr = scc_last_status_reg[channel] = SCCread_NB(STATUS_REG);
 550         changed = last_sr ^ sr;
 551
 552         if (changed & SR_DCD) {
 553                 port->c_dcd = !!(sr & SR_DCD);
 554                 if (!(port->gs.flags & ASYNC_CHECK_CD))
 555                         ;       /* Don't report DCD changes */
 556                 else if (port->c_dcd) {
 557                         wake_up_interruptible(&port->gs.open_wait);
 558                 }
 559                 else {
 560                         if (port->gs.tty)
 561                                 tty_hangup (port->gs.tty);
 562                 }
 563         }
 564         SCCwrite(COMMAND_REG, CR_EXTSTAT_RESET);
 565         SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
 566         return IRQ_HANDLED;
 567 }
 568
 569
 570 /*---------------------------------------------------------------------------
 571  * generic_serial.c callback funtions
 572  *--------------------------------------------------------------------------*/
 573
 574 static void scc_disable_tx_interrupts(void *ptr)
 575 {
 576         struct scc_port *port = ptr;
 577         unsigned long   flags;
 578         SCC_ACCESS_INIT(port);
 579
 580         local_irq_save(flags);
 581         SCCmod(INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0);
 582         port->gs.flags &= ~GS_TX_INTEN;
 583         local_irq_restore(flags);
 584 }
 585
 586
 587 static void scc_enable_tx_interrupts(void *ptr)
 588 {
 589         struct scc_port *port = ptr;
 590         unsigned long   flags;
 591         SCC_ACCESS_INIT(port);
 592
 593         local_irq_save(flags);
 594         SCCmod(INT_AND_DMA_REG, 0xff, IDR_TX_INT_ENAB);
 595         /* restart the transmitter */
 596         scc_tx_int (0, port);
 597         local_irq_restore(flags);
 598 }
 599
 600
 601 static void scc_disable_rx_interrupts(void *ptr)
 602 {
 603         struct scc_port *port = ptr;
 604         unsigned long   flags;
 605         SCC_ACCESS_INIT(port);
 606
 607         local_irq_save(flags);
 608         SCCmod(INT_AND_DMA_REG,
 609             ~(IDR_RX_INT_MASK|IDR_PARERR_AS_SPCOND|IDR_EXTSTAT_INT_ENAB), 0);
 610         local_irq_restore(flags);
 611 }
 612
 613
 614 static void scc_enable_rx_interrupts(void *ptr)
 615 {
 616         struct scc_port *port = ptr;
 617         unsigned long   flags;
 618         SCC_ACCESS_INIT(port);
 619
 620         local_irq_save(flags);
 621         SCCmod(INT_AND_DMA_REG, 0xff,
 622                 IDR_EXTSTAT_INT_ENAB|IDR_PARERR_AS_SPCOND|IDR_RX_INT_ALL);
 623         local_irq_restore(flags);
 624 }
 625
 626
 627 static int scc_get_CD(void *ptr)
 628 {
 629         struct scc_port *port = ptr;
 630         unsigned channel = port->channel;
 631
 632         return !!(scc_last_status_reg[channel] & SR_DCD);
 633 }
 634
 635
 636 static void scc_shutdown_port(void *ptr)
 637 {
 638         struct scc_port *port = ptr;
 639
 640         port->gs.flags &= ~ GS_ACTIVE;
 641         if (port->gs.tty && port->gs.tty->termios->c_cflag & HUPCL) {
 642                 scc_setsignals (port, 0, 0);
 643         }
 644 }
 645
 646
 647 static int scc_set_real_termios (void *ptr)
 648 {
 649         /* the SCC has char sizes 5,7,6,8 in that order! */
 650         static int chsize_map[4] = { 0, 2, 1, 3 };
 651         unsigned cflag, baud, chsize, channel, brgval = 0;
 652         unsigned long flags;
 653         struct scc_port *port = ptr;
 654         SCC_ACCESS_INIT(port);
 655
 656         if (!port->gs.tty || !port->gs.tty->termios) return 0;
 657
 658         channel = port->channel;
 659
 660         if (channel == CHANNEL_A)
 661                 return 0;               /* Settings controlled by boot PROM */
 662
 663         cflag  = port->gs.tty->termios->c_cflag;
 664         baud = port->gs.baud;
 665         chsize = (cflag & CSIZE) >> 4;
 666
 667         if (baud == 0) {
 668                 /* speed == 0 -> drop DTR */
 669                 local_irq_save(flags);
 670                 SCCmod(TX_CTRL_REG, ~TCR_DTR, 0);
 671                 local_irq_restore(flags);
 672                 return 0;
 673         }
 674         else if ((MACH_IS_MVME16x && (baud < 50 || baud > 38400)) ||
 675                  (MACH_IS_MVME147 && (baud < 50 || baud > 19200)) ||
 676                  (MACH_IS_BVME6000 &&(baud < 50 || baud > 76800))) {
 677                 printk(KERN_NOTICE "SCC: Bad speed requested, %d\n", baud);
 678                 return 0;
 679         }
 680
 681         if (cflag & CLOCAL)
 682                 port->gs.flags &= ~ASYNC_CHECK_CD;
 683         else
 684                 port->gs.flags |= ASYNC_CHECK_CD;
 685
 686 #ifdef CONFIG_MVME147_SCC
 687         if (MACH_IS_MVME147)
 688                 brgval = (M147_SCC_PCLK + baud/2) / (16 * 2 * baud) - 2;
 689 #endif
 690 #ifdef CONFIG_MVME162_SCC
 691         if (MACH_IS_MVME16x)
 692                 brgval = (MVME_SCC_PCLK + baud/2) / (16 * 2 * baud) - 2;
 693 #endif
 694 #ifdef CONFIG_BVME6000_SCC
 695         if (MACH_IS_BVME6000)
 696                 brgval = (BVME_SCC_RTxC + baud/2) / (16 * 2 * baud) - 2;
 697 #endif
 698         /* Now we have all parameters and can go to set them: */
 699         local_irq_save(flags);
 700
 701         /* receiver's character size and auto-enables */
 702         SCCmod(RX_CTRL_REG, ~(RCR_CHSIZE_MASK|RCR_AUTO_ENAB_MODE),
 703                         (chsize_map[chsize] << 6) |
 704                         ((cflag & CRTSCTS) ? RCR_AUTO_ENAB_MODE : 0));
 705         /* parity and stop bits (both, Tx and Rx), clock mode never changes */
 706         SCCmod (AUX1_CTRL_REG,
 707                 ~(A1CR_PARITY_MASK | A1CR_MODE_MASK),
 708                 ((cflag & PARENB
 709                   ? (cflag & PARODD ? A1CR_PARITY_ODD : A1CR_PARITY_EVEN)
 710                   : A1CR_PARITY_NONE)
 711                  | (cflag & CSTOPB ? A1CR_MODE_ASYNC_2 : A1CR_MODE_ASYNC_1)));
 712         /* sender's character size, set DTR for valid baud rate */
 713         SCCmod(TX_CTRL_REG, ~TCR_CHSIZE_MASK, chsize_map[chsize] << 5 | TCR_DTR);
 714         /* clock sources never change */
 715         /* disable BRG before changing the value */
 716         SCCmod(DPLL_CTRL_REG, ~DCR_BRG_ENAB, 0);
 717         /* BRG value */
 718         SCCwrite(TIMER_LOW_REG, brgval & 0xff);
 719         SCCwrite(TIMER_HIGH_REG, (brgval >> 8) & 0xff);
 720         /* BRG enable, and clock source never changes */
 721         SCCmod(DPLL_CTRL_REG, 0xff, DCR_BRG_ENAB);
 722
 723         local_irq_restore(flags);
 724
 725         return 0;
 726 }
 727
 728
 729 static int scc_chars_in_buffer (void *ptr)
 730 {
 731         struct scc_port *port = ptr;
 732         SCC_ACCESS_INIT(port);
 733
 734         return (SCCread (SPCOND_STATUS_REG) & SCSR_ALL_SENT) ? 0  : 1;
 735 }
 736
 737
 738 /* Comment taken from sx.c (2.4.0):
 739    I haven't the foggiest why the decrement use count has to happen
 740    here. The whole linux serial drivers stuff needs to be redesigned.
 741    My guess is that this is a hack to minimize the impact of a bug
 742    elsewhere. Thinking about it some more. (try it sometime) Try
 743    running minicom on a serial port that is driven by a modularized
 744    driver. Have the modem hangup. Then remove the driver module. Then
 745    exit minicom.  I expect an "oops".  -- REW */
 746
 747 static void scc_hungup(void *ptr)
 748 {
 749         scc_disable_tx_interrupts(ptr);
 750         scc_disable_rx_interrupts(ptr);
 751 }
 752
 753
 754 static void scc_close(void *ptr)
 755 {
 756         scc_disable_tx_interrupts(ptr);
 757         scc_disable_rx_interrupts(ptr);
 758 }
 759
 760
 761 /*---------------------------------------------------------------------------
 762  * Internal support functions
 763  *--------------------------------------------------------------------------*/
 764
 765 static void scc_setsignals(struct scc_port *port, int dtr, int rts)
 766 {
 767         unsigned long flags;
 768         unsigned char t;
 769         SCC_ACCESS_INIT(port);
 770
 771         local_irq_save(flags);
 772         t = SCCread(TX_CTRL_REG);
 773         if (dtr >= 0) t = dtr? (t | TCR_DTR): (t & ~TCR_DTR);
 774         if (rts >= 0) t = rts? (t | TCR_RTS): (t & ~TCR_RTS);
 775         SCCwrite(TX_CTRL_REG, t);
 776         local_irq_restore(flags);
 777 }
 778
 779
 780 static void scc_send_xchar(struct tty_struct *tty, char ch)
 781 {
 782         struct scc_port *port = (struct scc_port *)tty->driver_data;
 783
 784         port->x_char = ch;
 785         if (ch)
 786                 scc_enable_tx_interrupts(port);
 787 }
 788
 789
 790 /*---------------------------------------------------------------------------
 791  * Driver entrypoints referenced from above
 792  *--------------------------------------------------------------------------*/
 793
 794 static int scc_open (struct tty_struct * tty, struct file * filp)
 795 {
 796         int line = tty->index;
 797         int retval;
 798         struct scc_port *port = &scc_ports[line];
 799         int i, channel = port->channel;
 800         unsigned long   flags;
 801         SCC_ACCESS_INIT(port);
 802 #if defined(CONFIG_MVME162_SCC) || defined(CONFIG_MVME147_SCC)
 803         static const struct {
 804                 unsigned reg, val;
 805         } mvme_init_tab[] = {
 806                 /* Values for MVME162 and MVME147 */
 807                 /* no parity, 1 stop bit, async, 1:16 */
 808                 { AUX1_CTRL_REG, A1CR_PARITY_NONE|A1CR_MODE_ASYNC_1|A1CR_CLKMODE_x16 },
 809                 /* parity error is special cond, ints disabled, no DMA */
 810                 { INT_AND_DMA_REG, IDR_PARERR_AS_SPCOND | IDR_RX_INT_DISAB },
 811                 /* Rx 8 bits/char, no auto enable, Rx off */
 812                 { RX_CTRL_REG, RCR_CHSIZE_8 },
 813                 /* DTR off, Tx 8 bits/char, RTS off, Tx off */
 814                 { TX_CTRL_REG, TCR_CHSIZE_8 },
 815                 /* special features off */
 816                 { AUX2_CTRL_REG, 0 },
 817                 { CLK_CTRL_REG, CCR_RXCLK_BRG | CCR_TXCLK_BRG },
 818                 { DPLL_CTRL_REG, DCR_BRG_ENAB | DCR_BRG_USE_PCLK },
 819                 /* Start Rx */
 820                 { RX_CTRL_REG, RCR_RX_ENAB | RCR_CHSIZE_8 },
 821                 /* Start Tx */
 822                 { TX_CTRL_REG, TCR_TX_ENAB | TCR_RTS | TCR_DTR | TCR_CHSIZE_8 },
 823                 /* Ext/Stat ints: DCD only */
 824                 { INT_CTRL_REG, ICR_ENAB_DCD_INT },
 825                 /* Reset Ext/Stat ints */
 826                 { COMMAND_REG, CR_EXTSTAT_RESET },
 827                 /* ...again */
 828                 { COMMAND_REG, CR_EXTSTAT_RESET },
 829         };
 830 #endif
 831 #if defined(CONFIG_BVME6000_SCC)
 832         static const struct {
 833                 unsigned reg, val;
 834         } bvme_init_tab[] = {
 835                 /* Values for BVME6000 */
 836                 /* no parity, 1 stop bit, async, 1:16 */
 837                 { AUX1_CTRL_REG, A1CR_PARITY_NONE|A1CR_MODE_ASYNC_1|A1CR_CLKMODE_x16 },
 838                 /* parity error is special cond, ints disabled, no DMA */
 839                 { INT_AND_DMA_REG, IDR_PARERR_AS_SPCOND | IDR_RX_INT_DISAB },
 840                 /* Rx 8 bits/char, no auto enable, Rx off */
 841                 { RX_CTRL_REG, RCR_CHSIZE_8 },
 842                 /* DTR off, Tx 8 bits/char, RTS off, Tx off */
 843                 { TX_CTRL_REG, TCR_CHSIZE_8 },
 844                 /* special features off */
 845                 { AUX2_CTRL_REG, 0 },
 846                 { CLK_CTRL_REG, CCR_RTxC_XTAL | CCR_RXCLK_BRG | CCR_TXCLK_BRG },
 847                 { DPLL_CTRL_REG, DCR_BRG_ENAB },
 848                 /* Start Rx */
 849                 { RX_CTRL_REG, RCR_RX_ENAB | RCR_CHSIZE_8 },
 850                 /* Start Tx */
 851                 { TX_CTRL_REG, TCR_TX_ENAB | TCR_RTS | TCR_DTR | TCR_CHSIZE_8 },
 852                 /* Ext/Stat ints: DCD only */
 853                 { INT_CTRL_REG, ICR_ENAB_DCD_INT },
 854                 /* Reset Ext/Stat ints */
 855                 { COMMAND_REG, CR_EXTSTAT_RESET },
 856                 /* ...again */
 857                 { COMMAND_REG, CR_EXTSTAT_RESET },
 858         };
 859 #endif
 860         if (!(port->gs.flags & ASYNC_INITIALIZED)) {
 861                 local_irq_save(flags);
 862 #if defined(CONFIG_MVME147_SCC) || defined(CONFIG_MVME162_SCC)
 863                 if (MACH_IS_MVME147 || MACH_IS_MVME16x) {
 864                         for (i = 0; i < ARRAY_SIZE(mvme_init_tab); ++i)
 865                                 SCCwrite(mvme_init_tab[i].reg, mvme_init_tab[i].val);
 866                 }
 867 #endif
 868 #if defined(CONFIG_BVME6000_SCC)
 869                 if (MACH_IS_BVME6000) {
 870                         for (i = 0; i < ARRAY_SIZE(bvme_init_tab); ++i)
 871                                 SCCwrite(bvme_init_tab[i].reg, bvme_init_tab[i].val);
 872                 }
 873 #endif
 874
 875                 /* remember status register for detection of DCD and CTS changes */
 876                 scc_last_status_reg[channel] = SCCread(STATUS_REG);
 877
 878                 port->c_dcd = 0;        /* Prevent initial 1->0 interrupt */
 879                 scc_setsignals (port, 1,1);
 880                 local_irq_restore(flags);
 881         }
 882
 883         tty->driver_data = port;
 884         port->gs.tty = tty;
 885         port->gs.count++;
 886         retval = gs_init_port(&port->gs);
 887         if (retval) {
 888                 port->gs.count--;
 889                 return retval;
 890         }
 891         port->gs.flags |= GS_ACTIVE;
 892         retval = gs_block_til_ready(port, filp);
 893
 894         if (retval) {
 895                 port->gs.count--;
 896                 return retval;
 897         }
 898
 899         port->c_dcd = scc_get_CD (port);
 900
 901         scc_enable_rx_interrupts(port);
 902
 903         return 0;
 904 }
 905
 906
 907 static void scc_throttle (struct tty_struct * tty)
 908 {
 909         struct scc_port *port = (struct scc_port *)tty->driver_data;
 910         unsigned long   flags;
 911         SCC_ACCESS_INIT(port);
 912
 913         if (tty->termios->c_cflag & CRTSCTS) {
 914                 local_irq_save(flags);
 915                 SCCmod(TX_CTRL_REG, ~TCR_RTS, 0);
 916                 local_irq_restore(flags);
 917         }
 918         if (I_IXOFF(tty))
 919                 scc_send_xchar(tty, STOP_CHAR(tty));
 920 }
 921
 922
 923 static void scc_unthrottle (struct tty_struct * tty)
 924 {
 925         struct scc_port *port = (struct scc_port *)tty->driver_data;
 926         unsigned long   flags;
 927         SCC_ACCESS_INIT(port);
 928
 929         if (tty->termios->c_cflag & CRTSCTS) {
 930                 local_irq_save(flags);
 931                 SCCmod(TX_CTRL_REG, 0xff, TCR_RTS);
 932                 local_irq_restore(flags);
 933         }
 934         if (I_IXOFF(tty))
 935                 scc_send_xchar(tty, START_CHAR(tty));
 936 }
 937
 938
 939 static int scc_ioctl(struct tty_struct *tty, struct file *file,
 940                      unsigned int cmd, unsigned long arg)
 941 {
 942         return -ENOIOCTLCMD;
 943 }
 944
 945
 946 static void scc_break_ctl(struct tty_struct *tty, int break_state)
 947 {
 948         struct scc_port *port = (struct scc_port *)tty->driver_data;
 949         unsigned long   flags;
 950         SCC_ACCESS_INIT(port);
 951
 952         local_irq_save(flags);
 953         SCCmod(TX_CTRL_REG, ~TCR_SEND_BREAK,
 954                         break_state ? TCR_SEND_BREAK : 0);
 955         local_irq_restore(flags);
 956 }
 957
 958
 959 /*---------------------------------------------------------------------------
 960  * Serial console stuff...
 961  *--------------------------------------------------------------------------*/
 962
 963 #define scc_delay() do { __asm__ __volatile__ (" nop; nop"); } while (0)
 964
 965 static void scc_ch_write (char ch)
 966 {
 967         volatile char *p = NULL;
 968
 969 #ifdef CONFIG_MVME147_SCC
 970         if (MACH_IS_MVME147)
 971                 p = (volatile char *)M147_SCC_A_ADDR;
 972 #endif
 973 #ifdef CONFIG_MVME162_SCC
 974         if (MACH_IS_MVME16x)
 975                 p = (volatile char *)MVME_SCC_A_ADDR;
 976 #endif
 977 #ifdef CONFIG_BVME6000_SCC
 978         if (MACH_IS_BVME6000)
 979                 p = (volatile char *)BVME_SCC_A_ADDR;
 980 #endif
 981
 982         do {
 983                 scc_delay();
 984         }
 985         while (!(*p & 4));
 986         scc_delay();
 987         *p = 8;
 988         scc_delay();
 989         *p = ch;
 990 }
 991
 992 /* The console must be locked when we get here. */
 993
 994 static void scc_console_write (struct console *co, const char *str, unsigned count)
 995 {
 996         unsigned long   flags;
 997
 998         local_irq_save(flags);
 999
1000         while (count--)
1001         {
1002                 if (*str == '\n')
1003                         scc_ch_write ('\r');
1004                 scc_ch_write (*str++);
1005         }
1006         local_irq_restore(flags);
1007 }
1008
1009 static struct tty_driver *scc_console_device(struct console *c, int *index)
1010 {
1011         *index = c->index;
1012         return scc_driver;
1013 }
1014
1015
1016 static int __init scc_console_setup(struct console *co, char *options)
1017 {
1018         return 0;
1019 }
1020
1021
1022 static struct console sercons = {
1023         .name           = "ttyS",
1024         .write          = scc_console_write,
1025         .device         = scc_console_device,
1026         .setup          = scc_console_setup,
1027         .flags          = CON_PRINTBUFFER,
1028         .index          = -1,
1029 };
1030
1031
1032 static int __init vme_scc_console_init(void)
1033 {
1034         if (vme_brdtype == VME_TYPE_MVME147 ||
1035                         vme_brdtype == VME_TYPE_MVME162 ||
1036                         vme_brdtype == VME_TYPE_MVME172 ||
1037                         vme_brdtype == VME_TYPE_BVME4000 ||
1038                         vme_brdtype == VME_TYPE_BVME6000)
1039                 register_console(&sercons);
1040         return 0;
1041 }
1042 console_initcall(vme_scc_console_init);