git.oblomov.eu Git - linux-2.6/blob - drivers/acpi/executer/exoparg1.c

   1
   2 /******************************************************************************
   3  *
   4  * Module Name: exoparg1 - AML execution - opcodes with 1 argument
   5  *
   6  *****************************************************************************/
   7
   8 /*
   9  * Copyright (C) 2000 - 2005, R. Byron Moore
  10  * All rights reserved.
  11  *
  12  * Redistribution and use in source and binary forms, with or without
  13  * modification, are permitted provided that the following conditions
  14  * are met:
  15  * 1. Redistributions of source code must retain the above copyright
  16  *    notice, this list of conditions, and the following disclaimer,
  17  *    without modification.
  18  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  19  *    substantially similar to the "NO WARRANTY" disclaimer below
  20  *    ("Disclaimer") and any redistribution must be conditioned upon
  21  *    including a substantially similar Disclaimer requirement for further
  22  *    binary redistribution.
  23  * 3. Neither the names of the above-listed copyright holders nor the names
  24  *    of any contributors may be used to endorse or promote products derived
  25  *    from this software without specific prior written permission.
  26  *
  27  * Alternatively, this software may be distributed under the terms of the
  28  * GNU General Public License ("GPL") version 2 as published by the Free
  29  * Software Foundation.
  30  *
  31  * NO WARRANTY
  32  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  33  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  34  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  35  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  36  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  37  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  38  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  39  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  40  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  41  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  42  * POSSIBILITY OF SUCH DAMAGES.
  43  */
  44
  45 #include <acpi/acpi.h>
  46 #include <acpi/acparser.h>
  47 #include <acpi/acdispat.h>
  48 #include <acpi/acinterp.h>
  49 #include <acpi/amlcode.h>
  50 #include <acpi/acnamesp.h>
  51
  52 #define _COMPONENT          ACPI_EXECUTER
  53 ACPI_MODULE_NAME("exoparg1")
  54
  55 /*!
  56  * Naming convention for AML interpreter execution routines.
  57  *
  58  * The routines that begin execution of AML opcodes are named with a common
  59  * convention based upon the number of arguments, the number of target operands,
  60  * and whether or not a value is returned:
  61  *
  62  *      AcpiExOpcode_xA_yT_zR
  63  *
  64  * Where:
  65  *
  66  * xA - ARGUMENTS:    The number of arguments (input operands) that are
  67  *                    required for this opcode type (0 through 6 args).
  68  * yT - TARGETS:      The number of targets (output operands) that are required
  69  *                    for this opcode type (0, 1, or 2 targets).
  70  * zR - RETURN VALUE: Indicates whether this opcode type returns a value
  71  *                    as the function return (0 or 1).
  72  *
  73  * The AcpiExOpcode* functions are called via the Dispatcher component with
  74  * fully resolved operands.
  75 !*/
  76 /*******************************************************************************
  77  *
  78  * FUNCTION:    acpi_ex_opcode_0A_0T_1R
  79  *
  80  * PARAMETERS:  walk_state          - Current state (contains AML opcode)
  81  *
  82  * RETURN:      Status
  83  *
  84  * DESCRIPTION: Execute operator with no operands, one return value
  85  *
  86  ******************************************************************************/
  87 acpi_status acpi_ex_opcode_0A_0T_1R(struct acpi_walk_state *walk_state)
  88 {
  89         acpi_status status = AE_OK;
  90         union acpi_operand_object *return_desc = NULL;
  91
  92         ACPI_FUNCTION_TRACE_STR("ex_opcode_0A_0T_1R",
  93                                 acpi_ps_get_opcode_name(walk_state->opcode));
  94
  95         /* Examine the AML opcode */
  96
  97         switch (walk_state->opcode) {
  98         case AML_TIMER_OP:      /*  Timer () */
  99
 100                 /* Create a return object of type Integer */
 101
 102                 return_desc = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
 103                 if (!return_desc) {
 104                         status = AE_NO_MEMORY;
 105                         goto cleanup;
 106                 }
 107 #if ACPI_MACHINE_WIDTH != 16
 108                 return_desc->integer.value = acpi_os_get_timer();
 109 #endif
 110                 break;
 111
 112         default:                /*  Unknown opcode  */
 113
 114                 ACPI_REPORT_ERROR(("acpi_ex_opcode_0A_0T_1R: Unknown opcode %X\n", walk_state->opcode));
 115                 status = AE_AML_BAD_OPCODE;
 116                 break;
 117         }
 118
 119       cleanup:
 120
 121         /* Delete return object on error */
 122
 123         if ((ACPI_FAILURE(status)) || walk_state->result_obj) {
 124                 acpi_ut_remove_reference(return_desc);
 125         } else {
 126                 /* Save the return value */
 127
 128                 walk_state->result_obj = return_desc;
 129         }
 130
 131         return_ACPI_STATUS(status);
 132 }
 133
 134 /*******************************************************************************
 135  *
 136  * FUNCTION:    acpi_ex_opcode_1A_0T_0R
 137  *
 138  * PARAMETERS:  walk_state          - Current state (contains AML opcode)
 139  *
 140  * RETURN:      Status
 141  *
 142  * DESCRIPTION: Execute Type 1 monadic operator with numeric operand on
 143  *              object stack
 144  *
 145  ******************************************************************************/
 146
 147 acpi_status acpi_ex_opcode_1A_0T_0R(struct acpi_walk_state *walk_state)
 148 {
 149         union acpi_operand_object **operand = &walk_state->operands[0];
 150         acpi_status status = AE_OK;
 151
 152         ACPI_FUNCTION_TRACE_STR("ex_opcode_1A_0T_0R",
 153                                 acpi_ps_get_opcode_name(walk_state->opcode));
 154
 155         /* Examine the AML opcode */
 156
 157         switch (walk_state->opcode) {
 158         case AML_RELEASE_OP:    /*  Release (mutex_object) */
 159
 160                 status = acpi_ex_release_mutex(operand[0], walk_state);
 161                 break;
 162
 163         case AML_RESET_OP:      /*  Reset (event_object) */
 164
 165                 status = acpi_ex_system_reset_event(operand[0]);
 166                 break;
 167
 168         case AML_SIGNAL_OP:     /*  Signal (event_object) */
 169
 170                 status = acpi_ex_system_signal_event(operand[0]);
 171                 break;
 172
 173         case AML_SLEEP_OP:      /*  Sleep (msec_time) */
 174
 175                 status = acpi_ex_system_do_suspend(operand[0]->integer.value);
 176                 break;
 177
 178         case AML_STALL_OP:      /*  Stall (usec_time) */
 179
 180                 status =
 181                     acpi_ex_system_do_stall((u32) operand[0]->integer.value);
 182                 break;
 183
 184         case AML_UNLOAD_OP:     /*  Unload (Handle) */
 185
 186                 status = acpi_ex_unload_table(operand[0]);
 187                 break;
 188
 189         default:                /*  Unknown opcode  */
 190
 191                 ACPI_REPORT_ERROR(("acpi_ex_opcode_1A_0T_0R: Unknown opcode %X\n", walk_state->opcode));
 192                 status = AE_AML_BAD_OPCODE;
 193                 break;
 194         }
 195
 196         return_ACPI_STATUS(status);
 197 }
 198
 199 /*******************************************************************************
 200  *
 201  * FUNCTION:    acpi_ex_opcode_1A_1T_0R
 202  *
 203  * PARAMETERS:  walk_state          - Current state (contains AML opcode)
 204  *
 205  * RETURN:      Status
 206  *
 207  * DESCRIPTION: Execute opcode with one argument, one target, and no
 208  *              return value.
 209  *
 210  ******************************************************************************/
 211
 212 acpi_status acpi_ex_opcode_1A_1T_0R(struct acpi_walk_state *walk_state)
 213 {
 214         acpi_status status = AE_OK;
 215         union acpi_operand_object **operand = &walk_state->operands[0];
 216
 217         ACPI_FUNCTION_TRACE_STR("ex_opcode_1A_1T_0R",
 218                                 acpi_ps_get_opcode_name(walk_state->opcode));
 219
 220         /* Examine the AML opcode */
 221
 222         switch (walk_state->opcode) {
 223         case AML_LOAD_OP:
 224
 225                 status = acpi_ex_load_op(operand[0], operand[1], walk_state);
 226                 break;
 227
 228         default:                /* Unknown opcode */
 229
 230                 ACPI_REPORT_ERROR(("acpi_ex_opcode_1A_1T_0R: Unknown opcode %X\n", walk_state->opcode));
 231                 status = AE_AML_BAD_OPCODE;
 232                 goto cleanup;
 233         }
 234
 235       cleanup:
 236
 237         return_ACPI_STATUS(status);
 238 }
 239
 240 /*******************************************************************************
 241  *
 242  * FUNCTION:    acpi_ex_opcode_1A_1T_1R
 243  *
 244  * PARAMETERS:  walk_state          - Current state (contains AML opcode)
 245  *
 246  * RETURN:      Status
 247  *
 248  * DESCRIPTION: Execute opcode with one argument, one target, and a
 249  *              return value.
 250  *
 251  ******************************************************************************/
 252
 253 acpi_status acpi_ex_opcode_1A_1T_1R(struct acpi_walk_state *walk_state)
 254 {
 255         acpi_status status = AE_OK;
 256         union acpi_operand_object **operand = &walk_state->operands[0];
 257         union acpi_operand_object *return_desc = NULL;
 258         union acpi_operand_object *return_desc2 = NULL;
 259         u32 temp32;
 260         u32 i;
 261         acpi_integer power_of_ten;
 262         acpi_integer digit;
 263
 264         ACPI_FUNCTION_TRACE_STR("ex_opcode_1A_1T_1R",
 265                                 acpi_ps_get_opcode_name(walk_state->opcode));
 266
 267         /* Examine the AML opcode */
 268
 269         switch (walk_state->opcode) {
 270         case AML_BIT_NOT_OP:
 271         case AML_FIND_SET_LEFT_BIT_OP:
 272         case AML_FIND_SET_RIGHT_BIT_OP:
 273         case AML_FROM_BCD_OP:
 274         case AML_TO_BCD_OP:
 275         case AML_COND_REF_OF_OP:
 276
 277                 /* Create a return object of type Integer for these opcodes */
 278
 279                 return_desc = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
 280                 if (!return_desc) {
 281                         status = AE_NO_MEMORY;
 282                         goto cleanup;
 283                 }
 284
 285                 switch (walk_state->opcode) {
 286                 case AML_BIT_NOT_OP:    /* Not (Operand, Result)  */
 287
 288                         return_desc->integer.value = ~operand[0]->integer.value;
 289                         break;
 290
 291                 case AML_FIND_SET_LEFT_BIT_OP:  /* find_set_left_bit (Operand, Result) */
 292
 293                         return_desc->integer.value = operand[0]->integer.value;
 294
 295                         /*
 296                          * Acpi specification describes Integer type as a little
 297                          * endian unsigned value, so this boundary condition is valid.
 298                          */
 299                         for (temp32 = 0; return_desc->integer.value &&
 300                              temp32 < ACPI_INTEGER_BIT_SIZE; ++temp32) {
 301                                 return_desc->integer.value >>= 1;
 302                         }
 303
 304                         return_desc->integer.value = temp32;
 305                         break;
 306
 307                 case AML_FIND_SET_RIGHT_BIT_OP: /* find_set_right_bit (Operand, Result) */
 308
 309                         return_desc->integer.value = operand[0]->integer.value;
 310
 311                         /*
 312                          * The Acpi specification describes Integer type as a little
 313                          * endian unsigned value, so this boundary condition is valid.
 314                          */
 315                         for (temp32 = 0; return_desc->integer.value &&
 316                              temp32 < ACPI_INTEGER_BIT_SIZE; ++temp32) {
 317                                 return_desc->integer.value <<= 1;
 318                         }
 319
 320                         /* Since the bit position is one-based, subtract from 33 (65) */
 321
 322                         return_desc->integer.value = temp32 == 0 ? 0 :
 323                             (ACPI_INTEGER_BIT_SIZE + 1) - temp32;
 324                         break;
 325
 326                 case AML_FROM_BCD_OP:   /* from_bcd (BCDValue, Result) */
 327
 328                         /*
 329                          * The 64-bit ACPI integer can hold 16 4-bit BCD characters
 330                          * (if table is 32-bit, integer can hold 8 BCD characters)
 331                          * Convert each 4-bit BCD value
 332                          */
 333                         power_of_ten = 1;
 334                         return_desc->integer.value = 0;
 335                         digit = operand[0]->integer.value;
 336
 337                         /* Convert each BCD digit (each is one nybble wide) */
 338
 339                         for (i = 0;
 340                              (i < acpi_gbl_integer_nybble_width) && (digit > 0);
 341                              i++) {
 342                                 /* Get the least significant 4-bit BCD digit */
 343
 344                                 temp32 = ((u32) digit) & 0xF;
 345
 346                                 /* Check the range of the digit */
 347
 348                                 if (temp32 > 9) {
 349                                         ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 350                                                           "BCD digit too large (not decimal): 0x%X\n",
 351                                                           temp32));
 352
 353                                         status = AE_AML_NUMERIC_OVERFLOW;
 354                                         goto cleanup;
 355                                 }
 356
 357                                 /* Sum the digit into the result with the current power of 10 */
 358
 359                                 return_desc->integer.value +=
 360                                     (((acpi_integer) temp32) * power_of_ten);
 361
 362                                 /* Shift to next BCD digit */
 363
 364                                 digit >>= 4;
 365
 366                                 /* Next power of 10 */
 367
 368                                 power_of_ten *= 10;
 369                         }
 370                         break;
 371
 372                 case AML_TO_BCD_OP:     /* to_bcd (Operand, Result) */
 373
 374                         return_desc->integer.value = 0;
 375                         digit = operand[0]->integer.value;
 376
 377                         /* Each BCD digit is one nybble wide */
 378
 379                         for (i = 0;
 380                              (i < acpi_gbl_integer_nybble_width) && (digit > 0);
 381                              i++) {
 382                                 (void)acpi_ut_short_divide(digit, 10, &digit,
 383                                                            &temp32);
 384
 385                                 /*
 386                                  * Insert the BCD digit that resides in the
 387                                  * remainder from above
 388                                  */
 389                                 return_desc->integer.value |=
 390                                     (((acpi_integer) temp32) << ACPI_MUL_4(i));
 391                         }
 392
 393                         /* Overflow if there is any data left in Digit */
 394
 395                         if (digit > 0) {
 396                                 ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 397                                                   "Integer too large to convert to BCD: %8.8X%8.8X\n",
 398                                                   ACPI_FORMAT_UINT64(operand
 399                                                                      [0]->
 400                                                                      integer.
 401                                                                      value)));
 402                                 status = AE_AML_NUMERIC_OVERFLOW;
 403                                 goto cleanup;
 404                         }
 405                         break;
 406
 407                 case AML_COND_REF_OF_OP:        /* cond_ref_of (source_object, Result) */
 408
 409                         /*
 410                          * This op is a little strange because the internal return value is
 411                          * different than the return value stored in the result descriptor
 412                          * (There are really two return values)
 413                          */
 414                         if ((struct acpi_namespace_node *)operand[0] ==
 415                             acpi_gbl_root_node) {
 416                                 /*
 417                                  * This means that the object does not exist in the namespace,
 418                                  * return FALSE
 419                                  */
 420                                 return_desc->integer.value = 0;
 421                                 goto cleanup;
 422                         }
 423
 424                         /* Get the object reference, store it, and remove our reference */
 425
 426                         status = acpi_ex_get_object_reference(operand[0],
 427                                                               &return_desc2,
 428                                                               walk_state);
 429                         if (ACPI_FAILURE(status)) {
 430                                 goto cleanup;
 431                         }
 432
 433                         status =
 434                             acpi_ex_store(return_desc2, operand[1], walk_state);
 435                         acpi_ut_remove_reference(return_desc2);
 436
 437                         /* The object exists in the namespace, return TRUE */
 438
 439                         return_desc->integer.value = ACPI_INTEGER_MAX;
 440                         goto cleanup;
 441
 442                 default:
 443                         /* No other opcodes get here */
 444                         break;
 445                 }
 446                 break;
 447
 448         case AML_STORE_OP:      /* Store (Source, Target) */
 449
 450                 /*
 451                  * A store operand is typically a number, string, buffer or lvalue
 452                  * Be careful about deleting the source object,
 453                  * since the object itself may have been stored.
 454                  */
 455                 status = acpi_ex_store(operand[0], operand[1], walk_state);
 456                 if (ACPI_FAILURE(status)) {
 457                         return_ACPI_STATUS(status);
 458                 }
 459
 460                 /* It is possible that the Store already produced a return object */
 461
 462                 if (!walk_state->result_obj) {
 463                         /*
 464                          * Normally, we would remove a reference on the Operand[0]
 465                          * parameter; But since it is being used as the internal return
 466                          * object (meaning we would normally increment it), the two
 467                          * cancel out, and we simply don't do anything.
 468                          */
 469                         walk_state->result_obj = operand[0];
 470                         walk_state->operands[0] = NULL; /* Prevent deletion */
 471                 }
 472                 return_ACPI_STATUS(status);
 473
 474                 /*
 475                  * ACPI 2.0 Opcodes
 476                  */
 477         case AML_COPY_OP:       /* Copy (Source, Target) */
 478
 479                 status =
 480                     acpi_ut_copy_iobject_to_iobject(operand[0], &return_desc,
 481                                                     walk_state);
 482                 break;
 483
 484         case AML_TO_DECSTRING_OP:       /* to_decimal_string (Data, Result) */
 485
 486                 status = acpi_ex_convert_to_string(operand[0], &return_desc,
 487                                                    ACPI_EXPLICIT_CONVERT_DECIMAL);
 488                 if (return_desc == operand[0]) {
 489                         /* No conversion performed, add ref to handle return value */
 490                         acpi_ut_add_reference(return_desc);
 491                 }
 492                 break;
 493
 494         case AML_TO_HEXSTRING_OP:       /* to_hex_string (Data, Result) */
 495
 496                 status = acpi_ex_convert_to_string(operand[0], &return_desc,
 497                                                    ACPI_EXPLICIT_CONVERT_HEX);
 498                 if (return_desc == operand[0]) {
 499                         /* No conversion performed, add ref to handle return value */
 500                         acpi_ut_add_reference(return_desc);
 501                 }
 502                 break;
 503
 504         case AML_TO_BUFFER_OP:  /* to_buffer (Data, Result) */
 505
 506                 status = acpi_ex_convert_to_buffer(operand[0], &return_desc);
 507                 if (return_desc == operand[0]) {
 508                         /* No conversion performed, add ref to handle return value */
 509                         acpi_ut_add_reference(return_desc);
 510                 }
 511                 break;
 512
 513         case AML_TO_INTEGER_OP: /* to_integer (Data, Result) */
 514
 515                 status = acpi_ex_convert_to_integer(operand[0], &return_desc,
 516                                                     ACPI_ANY_BASE);
 517                 if (return_desc == operand[0]) {
 518                         /* No conversion performed, add ref to handle return value */
 519                         acpi_ut_add_reference(return_desc);
 520                 }
 521                 break;
 522
 523         case AML_SHIFT_LEFT_BIT_OP:     /* shift_left_bit (Source, bit_num) */
 524         case AML_SHIFT_RIGHT_BIT_OP:    /* shift_right_bit (Source, bit_num) */
 525
 526                 /* These are two obsolete opcodes */
 527
 528                 ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 529                                   "%s is obsolete and not implemented\n",
 530                                   acpi_ps_get_opcode_name(walk_state->opcode)));
 531                 status = AE_SUPPORT;
 532                 goto cleanup;
 533
 534         default:                /* Unknown opcode */
 535
 536                 ACPI_REPORT_ERROR(("acpi_ex_opcode_1A_1T_1R: Unknown opcode %X\n", walk_state->opcode));
 537                 status = AE_AML_BAD_OPCODE;
 538                 goto cleanup;
 539         }
 540
 541         if (ACPI_SUCCESS(status)) {
 542                 /* Store the return value computed above into the target object */
 543
 544                 status = acpi_ex_store(return_desc, operand[1], walk_state);
 545         }
 546
 547       cleanup:
 548
 549         if (!walk_state->result_obj) {
 550                 walk_state->result_obj = return_desc;
 551         }
 552
 553         /* Delete return object on error */
 554
 555         if (ACPI_FAILURE(status)) {
 556                 acpi_ut_remove_reference(return_desc);
 557         }
 558
 559         return_ACPI_STATUS(status);
 560 }
 561
 562 /*******************************************************************************
 563  *
 564  * FUNCTION:    acpi_ex_opcode_1A_0T_1R
 565  *
 566  * PARAMETERS:  walk_state          - Current state (contains AML opcode)
 567  *
 568  * RETURN:      Status
 569  *
 570  * DESCRIPTION: Execute opcode with one argument, no target, and a return value
 571  *
 572  ******************************************************************************/
 573
 574 acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state)
 575 {
 576         union acpi_operand_object **operand = &walk_state->operands[0];
 577         union acpi_operand_object *temp_desc;
 578         union acpi_operand_object *return_desc = NULL;
 579         acpi_status status = AE_OK;
 580         u32 type;
 581         acpi_integer value;
 582
 583         ACPI_FUNCTION_TRACE_STR("ex_opcode_1A_0T_1R",
 584                                 acpi_ps_get_opcode_name(walk_state->opcode));
 585
 586         /* Examine the AML opcode */
 587
 588         switch (walk_state->opcode) {
 589         case AML_LNOT_OP:       /* LNot (Operand) */
 590
 591                 return_desc = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
 592                 if (!return_desc) {
 593                         status = AE_NO_MEMORY;
 594                         goto cleanup;
 595                 }
 596
 597                 /*
 598                  * Set result to ONES (TRUE) if Value == 0.  Note:
 599                  * return_desc->Integer.Value is initially == 0 (FALSE) from above.
 600                  */
 601                 if (!operand[0]->integer.value) {
 602                         return_desc->integer.value = ACPI_INTEGER_MAX;
 603                 }
 604                 break;
 605
 606         case AML_DECREMENT_OP:  /* Decrement (Operand)  */
 607         case AML_INCREMENT_OP:  /* Increment (Operand)  */
 608
 609                 /*
 610                  * Create a new integer.  Can't just get the base integer and
 611                  * increment it because it may be an Arg or Field.
 612                  */
 613                 return_desc = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
 614                 if (!return_desc) {
 615                         status = AE_NO_MEMORY;
 616                         goto cleanup;
 617                 }
 618
 619                 /*
 620                  * Since we are expecting a Reference operand, it can be either a
 621                  * NS Node or an internal object.
 622                  */
 623                 temp_desc = operand[0];
 624                 if (ACPI_GET_DESCRIPTOR_TYPE(temp_desc) ==
 625                     ACPI_DESC_TYPE_OPERAND) {
 626                         /* Internal reference object - prevent deletion */
 627
 628                         acpi_ut_add_reference(temp_desc);
 629                 }
 630
 631                 /*
 632                  * Convert the Reference operand to an Integer (This removes a
 633                  * reference on the Operand[0] object)
 634                  *
 635                  * NOTE:  We use LNOT_OP here in order to force resolution of the
 636                  * reference operand to an actual integer.
 637                  */
 638                 status =
 639                     acpi_ex_resolve_operands(AML_LNOT_OP, &temp_desc,
 640                                              walk_state);
 641                 if (ACPI_FAILURE(status)) {
 642                         ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 643                                           "%s: bad operand(s) %s\n",
 644                                           acpi_ps_get_opcode_name(walk_state->
 645                                                                   opcode),
 646                                           acpi_format_exception(status)));
 647
 648                         goto cleanup;
 649                 }
 650
 651                 /*
 652                  * temp_desc is now guaranteed to be an Integer object --
 653                  * Perform the actual increment or decrement
 654                  */
 655                 if (walk_state->opcode == AML_INCREMENT_OP) {
 656                         return_desc->integer.value =
 657                             temp_desc->integer.value + 1;
 658                 } else {
 659                         return_desc->integer.value =
 660                             temp_desc->integer.value - 1;
 661                 }
 662
 663                 /* Finished with this Integer object */
 664
 665                 acpi_ut_remove_reference(temp_desc);
 666
 667                 /*
 668                  * Store the result back (indirectly) through the original
 669                  * Reference object
 670                  */
 671                 status = acpi_ex_store(return_desc, operand[0], walk_state);
 672                 break;
 673
 674         case AML_TYPE_OP:       /* object_type (source_object) */
 675
 676                 /*
 677                  * Note: The operand is not resolved at this point because we want to
 678                  * get the associated object, not its value.  For example, we don't
 679                  * want to resolve a field_unit to its value, we want the actual
 680                  * field_unit object.
 681                  */
 682
 683                 /* Get the type of the base object */
 684
 685                 status =
 686                     acpi_ex_resolve_multiple(walk_state, operand[0], &type,
 687                                              NULL);
 688                 if (ACPI_FAILURE(status)) {
 689                         goto cleanup;
 690                 }
 691                 /* Allocate a descriptor to hold the type. */
 692
 693                 return_desc = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
 694                 if (!return_desc) {
 695                         status = AE_NO_MEMORY;
 696                         goto cleanup;
 697                 }
 698
 699                 return_desc->integer.value = type;
 700                 break;
 701
 702         case AML_SIZE_OF_OP:    /* size_of (source_object) */
 703
 704                 /*
 705                  * Note: The operand is not resolved at this point because we want to
 706                  * get the associated object, not its value.
 707                  */
 708
 709                 /* Get the base object */
 710
 711                 status = acpi_ex_resolve_multiple(walk_state,
 712                                                   operand[0], &type,
 713                                                   &temp_desc);
 714                 if (ACPI_FAILURE(status)) {
 715                         goto cleanup;
 716                 }
 717
 718                 /*
 719                  * The type of the base object must be integer, buffer, string, or
 720                  * package.  All others are not supported.
 721                  *
 722                  * NOTE: Integer is not specifically supported by the ACPI spec,
 723                  * but is supported implicitly via implicit operand conversion.
 724                  * rather than bother with conversion, we just use the byte width
 725                  * global (4 or 8 bytes).
 726                  */
 727                 switch (type) {
 728                 case ACPI_TYPE_INTEGER:
 729                         value = acpi_gbl_integer_byte_width;
 730                         break;
 731
 732                 case ACPI_TYPE_BUFFER:
 733                         value = temp_desc->buffer.length;
 734                         break;
 735
 736                 case ACPI_TYPE_STRING:
 737                         value = temp_desc->string.length;
 738                         break;
 739
 740                 case ACPI_TYPE_PACKAGE:
 741                         value = temp_desc->package.count;
 742                         break;
 743
 744                 default:
 745                         ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 746                                           "size_of - Operand is not Buf/Int/Str/Pkg - found type %s\n",
 747                                           acpi_ut_get_type_name(type)));
 748                         status = AE_AML_OPERAND_TYPE;
 749                         goto cleanup;
 750                 }
 751
 752                 /*
 753                  * Now that we have the size of the object, create a result
 754                  * object to hold the value
 755                  */
 756                 return_desc = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
 757                 if (!return_desc) {
 758                         status = AE_NO_MEMORY;
 759                         goto cleanup;
 760                 }
 761
 762                 return_desc->integer.value = value;
 763                 break;
 764
 765         case AML_REF_OF_OP:     /* ref_of (source_object) */
 766
 767                 status =
 768                     acpi_ex_get_object_reference(operand[0], &return_desc,
 769                                                  walk_state);
 770                 if (ACPI_FAILURE(status)) {
 771                         goto cleanup;
 772                 }
 773                 break;
 774
 775         case AML_DEREF_OF_OP:   /* deref_of (obj_reference | String) */
 776
 777                 /* Check for a method local or argument, or standalone String */
 778
 779                 if (ACPI_GET_DESCRIPTOR_TYPE(operand[0]) !=
 780                     ACPI_DESC_TYPE_NAMED) {
 781                         switch (ACPI_GET_OBJECT_TYPE(operand[0])) {
 782                         case ACPI_TYPE_LOCAL_REFERENCE:
 783                                 /*
 784                                  * This is a deref_of (local_x | arg_x)
 785                                  *
 786                                  * Must resolve/dereference the local/arg reference first
 787                                  */
 788                                 switch (operand[0]->reference.opcode) {
 789                                 case AML_LOCAL_OP:
 790                                 case AML_ARG_OP:
 791
 792                                         /* Set Operand[0] to the value of the local/arg */
 793
 794                                         status =
 795                                             acpi_ds_method_data_get_value
 796                                             (operand[0]->reference.opcode,
 797                                              operand[0]->reference.offset,
 798                                              walk_state, &temp_desc);
 799                                         if (ACPI_FAILURE(status)) {
 800                                                 goto cleanup;
 801                                         }
 802
 803                                         /*
 804                                          * Delete our reference to the input object and
 805                                          * point to the object just retrieved
 806                                          */
 807                                         acpi_ut_remove_reference(operand[0]);
 808                                         operand[0] = temp_desc;
 809                                         break;
 810
 811                                 case AML_REF_OF_OP:
 812
 813                                         /* Get the object to which the reference refers */
 814
 815                                         temp_desc =
 816                                             operand[0]->reference.object;
 817                                         acpi_ut_remove_reference(operand[0]);
 818                                         operand[0] = temp_desc;
 819                                         break;
 820
 821                                 default:
 822
 823                                         /* Must be an Index op - handled below */
 824                                         break;
 825                                 }
 826                                 break;
 827
 828                         case ACPI_TYPE_STRING:
 829
 830                                 /*
 831                                  * This is a deref_of (String). The string is a reference
 832                                  * to a named ACPI object.
 833                                  *
 834                                  * 1) Find the owning Node
 835                                  * 2) Dereference the node to an actual object.  Could be a
 836                                  *    Field, so we need to resolve the node to a value.
 837                                  */
 838                                 status =
 839                                     acpi_ns_get_node_by_path(operand[0]->string.
 840                                                              pointer,
 841                                                              walk_state->
 842                                                              scope_info->scope.
 843                                                              node,
 844                                                              ACPI_NS_SEARCH_PARENT,
 845                                                              ACPI_CAST_INDIRECT_PTR
 846                                                              (struct
 847                                                               acpi_namespace_node,
 848                                                               &return_desc));
 849                                 if (ACPI_FAILURE(status)) {
 850                                         goto cleanup;
 851                                 }
 852
 853                                 status =
 854                                     acpi_ex_resolve_node_to_value
 855                                     (ACPI_CAST_INDIRECT_PTR
 856                                      (struct acpi_namespace_node, &return_desc),
 857                                      walk_state);
 858                                 goto cleanup;
 859
 860                         default:
 861
 862                                 status = AE_AML_OPERAND_TYPE;
 863                                 goto cleanup;
 864                         }
 865                 }
 866
 867                 /* Operand[0] may have changed from the code above */
 868
 869                 if (ACPI_GET_DESCRIPTOR_TYPE(operand[0]) ==
 870                     ACPI_DESC_TYPE_NAMED) {
 871                         /*
 872                          * This is a deref_of (object_reference)
 873                          * Get the actual object from the Node (This is the dereference).
 874                          * This case may only happen when a local_x or arg_x is
 875                          * dereferenced above.
 876                          */
 877                         return_desc = acpi_ns_get_attached_object((struct
 878                                                                    acpi_namespace_node
 879                                                                    *)
 880                                                                   operand[0]);
 881                         acpi_ut_add_reference(return_desc);
 882                 } else {
 883                         /*
 884                          * This must be a reference object produced by either the
 885                          * Index() or ref_of() operator
 886                          */
 887                         switch (operand[0]->reference.opcode) {
 888                         case AML_INDEX_OP:
 889
 890                                 /*
 891                                  * The target type for the Index operator must be
 892                                  * either a Buffer or a Package
 893                                  */
 894                                 switch (operand[0]->reference.target_type) {
 895                                 case ACPI_TYPE_BUFFER_FIELD:
 896
 897                                         temp_desc =
 898                                             operand[0]->reference.object;
 899
 900                                         /*
 901                                          * Create a new object that contains one element of the
 902                                          * buffer -- the element pointed to by the index.
 903                                          *
 904                                          * NOTE: index into a buffer is NOT a pointer to a
 905                                          * sub-buffer of the main buffer, it is only a pointer to a
 906                                          * single element (byte) of the buffer!
 907                                          */
 908                                         return_desc =
 909                                             acpi_ut_create_internal_object
 910                                             (ACPI_TYPE_INTEGER);
 911                                         if (!return_desc) {
 912                                                 status = AE_NO_MEMORY;
 913                                                 goto cleanup;
 914                                         }
 915
 916                                         /*
 917                                          * Since we are returning the value of the buffer at the
 918                                          * indexed location, we don't need to add an additional
 919                                          * reference to the buffer itself.
 920                                          */
 921                                         return_desc->integer.value =
 922                                             temp_desc->buffer.
 923                                             pointer[operand[0]->reference.
 924                                                     offset];
 925                                         break;
 926
 927                                 case ACPI_TYPE_PACKAGE:
 928
 929                                         /*
 930                                          * Return the referenced element of the package.  We must
 931                                          * add another reference to the referenced object, however.
 932                                          */
 933                                         return_desc =
 934                                             *(operand[0]->reference.where);
 935                                         if (return_desc) {
 936                                                 acpi_ut_add_reference
 937                                                     (return_desc);
 938                                         }
 939
 940                                         break;
 941
 942                                 default:
 943
 944                                         ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 945                                                           "Unknown Index target_type %X in obj %p\n",
 946                                                           operand[0]->reference.
 947                                                           target_type,
 948                                                           operand[0]));
 949                                         status = AE_AML_OPERAND_TYPE;
 950                                         goto cleanup;
 951                                 }
 952                                 break;
 953
 954                         case AML_REF_OF_OP:
 955
 956                                 return_desc = operand[0]->reference.object;
 957
 958                                 if (ACPI_GET_DESCRIPTOR_TYPE(return_desc) ==
 959                                     ACPI_DESC_TYPE_NAMED) {
 960
 961                                         return_desc =
 962                                             acpi_ns_get_attached_object((struct
 963                                                                          acpi_namespace_node
 964                                                                          *)
 965                                                                         return_desc);
 966                                 }
 967
 968                                 /* Add another reference to the object! */
 969
 970                                 acpi_ut_add_reference(return_desc);
 971                                 break;
 972
 973                         default:
 974                                 ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 975                                                   "Unknown opcode in ref(%p) - %X\n",
 976                                                   operand[0],
 977                                                   operand[0]->reference.
 978                                                   opcode));
 979
 980                                 status = AE_TYPE;
 981                                 goto cleanup;
 982                         }
 983                 }
 984                 break;
 985
 986         default:
 987
 988                 ACPI_REPORT_ERROR(("acpi_ex_opcode_1A_0T_1R: Unknown opcode %X\n", walk_state->opcode));
 989                 status = AE_AML_BAD_OPCODE;
 990                 goto cleanup;
 991         }
 992
 993       cleanup:
 994
 995         /* Delete return object on error */
 996
 997         if (ACPI_FAILURE(status)) {
 998                 acpi_ut_remove_reference(return_desc);
 999         }
1000
1001         walk_state->result_obj = return_desc;
1002         return_ACPI_STATUS(status);
1003 }