1 /*********************************************************************
3 * Filename: irlan_eth.c
6 * Status: Experimental.
7 * Author: Dag Brattli <dagb@cs.uit.no>
8 * Created at: Thu Oct 15 08:37:58 1998
9 * Modified at: Tue Mar 21 09:06:41 2000
10 * Modified by: Dag Brattli <dagb@cs.uit.no>
11 * Sources: skeleton.c by Donald Becker <becker@CESDIS.gsfc.nasa.gov>
12 * slip.c by Laurence Culhane, <loz@holmes.demon.co.uk>
13 * Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
15 * Copyright (c) 1998-2000 Dag Brattli, All Rights Reserved.
17 * This program is free software; you can redistribute it and/or
18 * modify it under the terms of the GNU General Public License as
19 * published by the Free Software Foundation; either version 2 of
20 * the License, or (at your option) any later version.
22 * Neither Dag Brattli nor University of Tromsø admit liability nor
23 * provide warranty for any of this software. This material is
24 * provided "AS-IS" and at no charge.
26 ********************************************************************/
28 #include <linux/config.h>
29 #include <linux/netdevice.h>
30 #include <linux/etherdevice.h>
31 #include <linux/inetdevice.h>
32 #include <linux/if_arp.h>
33 #include <linux/module.h>
36 #include <net/irda/irda.h>
37 #include <net/irda/irmod.h>
38 #include <net/irda/irlan_common.h>
39 #include <net/irda/irlan_client.h>
40 #include <net/irda/irlan_event.h>
41 #include <net/irda/irlan_eth.h>
43 static int irlan_eth_open(struct net_device *dev);
44 static int irlan_eth_close(struct net_device *dev);
45 static int irlan_eth_xmit(struct sk_buff *skb, struct net_device *dev);
46 static void irlan_eth_set_multicast_list( struct net_device *dev);
47 static struct net_device_stats *irlan_eth_get_stats(struct net_device *dev);
50 * Function irlan_eth_setup (dev)
52 * The network device initialization function.
55 static void irlan_eth_setup(struct net_device *dev)
57 dev->open = irlan_eth_open;
58 dev->stop = irlan_eth_close;
59 dev->hard_start_xmit = irlan_eth_xmit;
60 dev->get_stats = irlan_eth_get_stats;
61 dev->set_multicast_list = irlan_eth_set_multicast_list;
62 dev->destructor = free_netdev;
64 SET_MODULE_OWNER(dev);
69 * Lets do all queueing in IrTTP instead of this device driver.
70 * Queueing here as well can introduce some strange latency
71 * problems, which we will avoid by setting the queue size to 0.
74 * The bugs in IrTTP and IrLAN that created this latency issue
75 * have now been fixed, and we can propagate flow control properly
76 * to the network layer. However, this requires a minimal queue of
77 * packets for the device.
78 * Without flow control, the Tx Queue is 14 (ttp) + 0 (dev) = 14
79 * With flow control, the Tx Queue is 7 (ttp) + 4 (dev) = 11
80 * See irlan_eth_flow_indication()...
81 * Note : this number was randomly selected and would need to
84 dev->tx_queue_len = 4;
88 * Function alloc_irlandev
90 * Allocate network device and control block
93 struct net_device *alloc_irlandev(const char *name)
95 return alloc_netdev(sizeof(struct irlan_cb), name,
100 * Function irlan_eth_open (dev)
102 * Network device has been opened by user
105 static int irlan_eth_open(struct net_device *dev)
107 struct irlan_cb *self = netdev_priv(dev);
109 IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
112 netif_stop_queue(dev); /* Wait until data link is ready */
114 /* We are now open, so time to do some work */
115 self->disconnect_reason = 0;
116 irlan_client_wakeup(self, self->saddr, self->daddr);
118 /* Make sure we have a hardware address before we return,
119 so DHCP clients gets happy */
120 return wait_event_interruptible(self->open_wait,
121 !self->tsap_data->connected);
125 * Function irlan_eth_close (dev)
127 * Stop the ether network device, his function will usually be called by
128 * ifconfig down. We should now disconnect the link, We start the
129 * close timer, so that the instance will be removed if we are unable
130 * to discover the remote device after the disconnect.
132 static int irlan_eth_close(struct net_device *dev)
134 struct irlan_cb *self = netdev_priv(dev);
136 IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
139 netif_stop_queue(dev);
141 irlan_close_data_channel(self);
142 irlan_close_tsaps(self);
144 irlan_do_client_event(self, IRLAN_LMP_DISCONNECT, NULL);
145 irlan_do_provider_event(self, IRLAN_LMP_DISCONNECT, NULL);
147 /* Remove frames queued on the control channel */
148 skb_queue_purge(&self->client.txq);
150 self->client.tx_busy = 0;
156 * Function irlan_eth_tx (skb)
158 * Transmits ethernet frames over IrDA link.
161 static int irlan_eth_xmit(struct sk_buff *skb, struct net_device *dev)
163 struct irlan_cb *self = netdev_priv(dev);
166 /* skb headroom large enough to contain all IrDA-headers? */
167 if ((skb_headroom(skb) < self->max_header_size) || (skb_shared(skb))) {
168 struct sk_buff *new_skb =
169 skb_realloc_headroom(skb, self->max_header_size);
171 /* We have to free the original skb anyway */
174 /* Did the realloc succeed? */
178 /* Use the new skb instead */
182 dev->trans_start = jiffies;
184 /* Now queue the packet in the transport layer */
186 ret = irttp_udata_request(self->tsap_data, skb);
188 ret = irttp_data_request(self->tsap_data, skb);
192 * IrTTPs tx queue is full, so we just have to
193 * drop the frame! You might think that we should
194 * just return -1 and don't deallocate the frame,
195 * but that is dangerous since it's possible that
196 * we have replaced the original skb with a new
197 * one with larger headroom, and that would really
198 * confuse do_dev_queue_xmit() in dev.c! I have
201 /* irttp_data_request already free the packet */
202 self->stats.tx_dropped++;
204 self->stats.tx_packets++;
205 self->stats.tx_bytes += skb->len;
212 * Function irlan_eth_receive (handle, skb)
214 * This function gets the data that is received on the data channel
217 int irlan_eth_receive(void *instance, void *sap, struct sk_buff *skb)
219 struct irlan_cb *self = instance;
222 ++self->stats.rx_dropped;
225 if (skb->len < ETH_HLEN) {
226 IRDA_DEBUG(0, "%s() : IrLAN frame too short (%d)\n",
227 __FUNCTION__, skb->len);
228 ++self->stats.rx_dropped;
234 * Adopt this frame! Important to set all these fields since they
235 * might have been previously set by the low level IrDA network
238 skb->dev = self->dev;
239 skb->protocol=eth_type_trans(skb, skb->dev); /* Remove eth header */
241 self->stats.rx_packets++;
242 self->stats.rx_bytes += skb->len;
244 netif_rx(skb); /* Eat it! */
250 * Function irlan_eth_flow (status)
252 * Do flow control between IP/Ethernet and IrLAN/IrTTP. This is done by
253 * controlling the queue stop/start.
255 * The IrDA link layer has the advantage to have flow control, and
256 * IrTTP now properly handles that. Flow controlling the higher layers
257 * prevent us to drop Tx packets in here (up to 15% for a TCP socket,
258 * more for UDP socket).
259 * Also, this allow us to reduce the overall transmit queue, which means
260 * less latency in case of mixed traffic.
263 void irlan_eth_flow_indication(void *instance, void *sap, LOCAL_FLOW flow)
265 struct irlan_cb *self;
266 struct net_device *dev;
268 self = (struct irlan_cb *) instance;
270 IRDA_ASSERT(self != NULL, return;);
271 IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
275 IRDA_ASSERT(dev != NULL, return;);
277 IRDA_DEBUG(0, "%s() : flow %s ; running %d\n", __FUNCTION__,
278 flow == FLOW_STOP ? "FLOW_STOP" : "FLOW_START",
283 /* IrTTP is full, stop higher layers */
284 netif_stop_queue(dev);
288 /* Tell upper layers that its time to transmit frames again */
289 /* Schedule network layer */
290 netif_wake_queue(dev);
296 * Function irlan_etc_send_gratuitous_arp (dev)
298 * Send gratuitous ARP to announce that we have changed
299 * hardware address, so that all peers updates their ARP tables
301 void irlan_eth_send_gratuitous_arp(struct net_device *dev)
303 struct in_device *in_dev;
306 * When we get a new MAC address do a gratuitous ARP. This
307 * is useful if we have changed access points on the same
311 IRDA_DEBUG(4, "IrLAN: Sending gratuitous ARP\n");
313 in_dev = __in_dev_get_rcu(dev);
316 if (in_dev->ifa_list)
318 arp_send(ARPOP_REQUEST, ETH_P_ARP,
319 in_dev->ifa_list->ifa_address,
321 in_dev->ifa_list->ifa_address,
322 NULL, dev->dev_addr, NULL);
325 #endif /* CONFIG_INET */
329 * Function set_multicast_list (dev)
331 * Configure the filtering of the device
334 #define HW_MAX_ADDRS 4 /* Must query to get it! */
335 static void irlan_eth_set_multicast_list(struct net_device *dev)
337 struct irlan_cb *self = netdev_priv(dev);
339 IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
341 /* Check if data channel has been connected yet */
342 if (self->client.state != IRLAN_DATA) {
343 IRDA_DEBUG(1, "%s(), delaying!\n", __FUNCTION__ );
347 if (dev->flags & IFF_PROMISC) {
348 /* Enable promiscuous mode */
349 IRDA_WARNING("Promiscous mode not implemented by IrLAN!\n");
351 else if ((dev->flags & IFF_ALLMULTI) || dev->mc_count > HW_MAX_ADDRS) {
352 /* Disable promiscuous mode, use normal mode. */
353 IRDA_DEBUG(4, "%s(), Setting multicast filter\n", __FUNCTION__ );
354 /* hardware_set_filter(NULL); */
356 irlan_set_multicast_filter(self, TRUE);
358 else if (dev->mc_count) {
359 IRDA_DEBUG(4, "%s(), Setting multicast filter\n", __FUNCTION__ );
360 /* Walk the address list, and load the filter */
361 /* hardware_set_filter(dev->mc_list); */
363 irlan_set_multicast_filter(self, TRUE);
366 IRDA_DEBUG(4, "%s(), Clearing multicast filter\n", __FUNCTION__ );
367 irlan_set_multicast_filter(self, FALSE);
370 if (dev->flags & IFF_BROADCAST)
371 irlan_set_broadcast_filter(self, TRUE);
373 irlan_set_broadcast_filter(self, FALSE);
377 * Function irlan_get_stats (dev)
379 * Get the current statistics for this device
382 static struct net_device_stats *irlan_eth_get_stats(struct net_device *dev)
384 struct irlan_cb *self = netdev_priv(dev);