git.oblomov.eu Git - linux-2.6/blob - arch/powerpc/platforms/cell/spufs/switch.c

   1 /*
   2  * spu_switch.c
   3  *
   4  * (C) Copyright IBM Corp. 2005
   5  *
   6  * Author: Mark Nutter <mnutter@us.ibm.com>
   7  *
   8  * Host-side part of SPU context switch sequence outlined in
   9  * Synergistic Processor Element, Book IV.
  10  *
  11  * A fully premptive switch of an SPE is very expensive in terms
  12  * of time and system resources.  SPE Book IV indicates that SPE
  13  * allocation should follow a "serially reusable device" model,
  14  * in which the SPE is assigned a task until it completes.  When
  15  * this is not possible, this sequence may be used to premptively
  16  * save, and then later (optionally) restore the context of a
  17  * program executing on an SPE.
  18  *
  19  *
  20  * This program is free software; you can redistribute it and/or modify
  21  * it under the terms of the GNU General Public License as published by
  22  * the Free Software Foundation; either version 2, or (at your option)
  23  * any later version.
  24  *
  25  * This program is distributed in the hope that it will be useful,
  26  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  27  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  28  * GNU General Public License for more details.
  29  *
  30  * You should have received a copy of the GNU General Public License
  31  * along with this program; if not, write to the Free Software
  32  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  33  */
  34
  35 #include <linux/module.h>
  36 #include <linux/errno.h>
  37 #include <linux/sched.h>
  38 #include <linux/kernel.h>
  39 #include <linux/mm.h>
  40 #include <linux/vmalloc.h>
  41 #include <linux/smp.h>
  42 #include <linux/stddef.h>
  43 #include <linux/unistd.h>
  44
  45 #include <asm/io.h>
  46 #include <asm/spu.h>
  47 #include <asm/spu_priv1.h>
  48 #include <asm/spu_csa.h>
  49 #include <asm/mmu_context.h>
  50
  51 #include "spufs.h"
  52
  53 #include "spu_save_dump.h"
  54 #include "spu_restore_dump.h"
  55
  56 #if 0
  57 #define POLL_WHILE_TRUE(_c) {                           \
  58     do {                                                \
  59     } while (_c);                                       \
  60   }
  61 #else
  62 #define RELAX_SPIN_COUNT                                1000
  63 #define POLL_WHILE_TRUE(_c) {                           \
  64     do {                                                \
  65         int _i;                                         \
  66         for (_i=0; _i<RELAX_SPIN_COUNT && (_c); _i++) { \
  67             cpu_relax();                                \
  68         }                                               \
  69         if (unlikely(_c)) yield();                      \
  70         else break;                                     \
  71     } while (_c);                                       \
  72   }
  73 #endif                          /* debug */
  74
  75 #define POLL_WHILE_FALSE(_c)    POLL_WHILE_TRUE(!(_c))
  76
  77 static inline void acquire_spu_lock(struct spu *spu)
  78 {
  79         /* Save, Step 1:
  80          * Restore, Step 1:
  81          *    Acquire SPU-specific mutual exclusion lock.
  82          *    TBD.
  83          */
  84 }
  85
  86 static inline void release_spu_lock(struct spu *spu)
  87 {
  88         /* Restore, Step 76:
  89          *    Release SPU-specific mutual exclusion lock.
  90          *    TBD.
  91          */
  92 }
  93
  94 static inline int check_spu_isolate(struct spu_state *csa, struct spu *spu)
  95 {
  96         struct spu_problem __iomem *prob = spu->problem;
  97         u32 isolate_state;
  98
  99         /* Save, Step 2:
 100          * Save, Step 6:
 101          *     If SPU_Status[E,L,IS] any field is '1', this
 102          *     SPU is in isolate state and cannot be context
 103          *     saved at this time.
 104          */
 105         isolate_state = SPU_STATUS_ISOLATED_STATE |
 106             SPU_STATUS_ISOLATED_LOAD_STATUS | SPU_STATUS_ISOLATED_EXIT_STATUS;
 107         return (in_be32(&prob->spu_status_R) & isolate_state) ? 1 : 0;
 108 }
 109
 110 static inline void disable_interrupts(struct spu_state *csa, struct spu *spu)
 111 {
 112         /* Save, Step 3:
 113          * Restore, Step 2:
 114          *     Save INT_Mask_class0 in CSA.
 115          *     Write INT_MASK_class0 with value of 0.
 116          *     Save INT_Mask_class1 in CSA.
 117          *     Write INT_MASK_class1 with value of 0.
 118          *     Save INT_Mask_class2 in CSA.
 119          *     Write INT_MASK_class2 with value of 0.
 120          */
 121         spin_lock_irq(&spu->register_lock);
 122         if (csa) {
 123                 csa->priv1.int_mask_class0_RW = spu_int_mask_get(spu, 0);
 124                 csa->priv1.int_mask_class1_RW = spu_int_mask_get(spu, 1);
 125                 csa->priv1.int_mask_class2_RW = spu_int_mask_get(spu, 2);
 126         }
 127         spu_int_mask_set(spu, 0, 0ul);
 128         spu_int_mask_set(spu, 1, 0ul);
 129         spu_int_mask_set(spu, 2, 0ul);
 130         eieio();
 131         spin_unlock_irq(&spu->register_lock);
 132 }
 133
 134 static inline void set_watchdog_timer(struct spu_state *csa, struct spu *spu)
 135 {
 136         /* Save, Step 4:
 137          * Restore, Step 25.
 138          *    Set a software watchdog timer, which specifies the
 139          *    maximum allowable time for a context save sequence.
 140          *
 141          *    For present, this implementation will not set a global
 142          *    watchdog timer, as virtualization & variable system load
 143          *    may cause unpredictable execution times.
 144          */
 145 }
 146
 147 static inline void inhibit_user_access(struct spu_state *csa, struct spu *spu)
 148 {
 149         /* Save, Step 5:
 150          * Restore, Step 3:
 151          *     Inhibit user-space access (if provided) to this
 152          *     SPU by unmapping the virtual pages assigned to
 153          *     the SPU memory-mapped I/O (MMIO) for problem
 154          *     state. TBD.
 155          */
 156 }
 157
 158 static inline void set_switch_pending(struct spu_state *csa, struct spu *spu)
 159 {
 160         /* Save, Step 7:
 161          * Restore, Step 5:
 162          *     Set a software context switch pending flag.
 163          */
 164         set_bit(SPU_CONTEXT_SWITCH_PENDING, &spu->flags);
 165         mb();
 166 }
 167
 168 static inline void save_mfc_cntl(struct spu_state *csa, struct spu *spu)
 169 {
 170         struct spu_priv2 __iomem *priv2 = spu->priv2;
 171
 172         /* Save, Step 8:
 173          *     Suspend DMA and save MFC_CNTL.
 174          */
 175         switch (in_be64(&priv2->mfc_control_RW) &
 176                MFC_CNTL_SUSPEND_DMA_STATUS_MASK) {
 177         case MFC_CNTL_SUSPEND_IN_PROGRESS:
 178                 POLL_WHILE_FALSE((in_be64(&priv2->mfc_control_RW) &
 179                                   MFC_CNTL_SUSPEND_DMA_STATUS_MASK) ==
 180                                  MFC_CNTL_SUSPEND_COMPLETE);
 181                 /* fall through */
 182         case MFC_CNTL_SUSPEND_COMPLETE:
 183                 if (csa) {
 184                         csa->priv2.mfc_control_RW =
 185                                 MFC_CNTL_SUSPEND_MASK |
 186                                 MFC_CNTL_SUSPEND_DMA_QUEUE;
 187                 }
 188                 break;
 189         case MFC_CNTL_NORMAL_DMA_QUEUE_OPERATION:
 190                 out_be64(&priv2->mfc_control_RW, MFC_CNTL_SUSPEND_DMA_QUEUE);
 191                 POLL_WHILE_FALSE((in_be64(&priv2->mfc_control_RW) &
 192                                   MFC_CNTL_SUSPEND_DMA_STATUS_MASK) ==
 193                                  MFC_CNTL_SUSPEND_COMPLETE);
 194                 if (csa) {
 195                         csa->priv2.mfc_control_RW = 0;
 196                 }
 197                 break;
 198         }
 199 }
 200
 201 static inline void save_spu_runcntl(struct spu_state *csa, struct spu *spu)
 202 {
 203         struct spu_problem __iomem *prob = spu->problem;
 204
 205         /* Save, Step 9:
 206          *     Save SPU_Runcntl in the CSA.  This value contains
 207          *     the "Application Desired State".
 208          */
 209         csa->prob.spu_runcntl_RW = in_be32(&prob->spu_runcntl_RW);
 210 }
 211
 212 static inline void save_mfc_sr1(struct spu_state *csa, struct spu *spu)
 213 {
 214         /* Save, Step 10:
 215          *     Save MFC_SR1 in the CSA.
 216          */
 217         csa->priv1.mfc_sr1_RW = spu_mfc_sr1_get(spu);
 218 }
 219
 220 static inline void save_spu_status(struct spu_state *csa, struct spu *spu)
 221 {
 222         struct spu_problem __iomem *prob = spu->problem;
 223
 224         /* Save, Step 11:
 225          *     Read SPU_Status[R], and save to CSA.
 226          */
 227         if ((in_be32(&prob->spu_status_R) & SPU_STATUS_RUNNING) == 0) {
 228                 csa->prob.spu_status_R = in_be32(&prob->spu_status_R);
 229         } else {
 230                 u32 stopped;
 231
 232                 out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_STOP);
 233                 eieio();
 234                 POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
 235                                 SPU_STATUS_RUNNING);
 236                 stopped =
 237                     SPU_STATUS_INVALID_INSTR | SPU_STATUS_SINGLE_STEP |
 238                     SPU_STATUS_STOPPED_BY_HALT | SPU_STATUS_STOPPED_BY_STOP;
 239                 if ((in_be32(&prob->spu_status_R) & stopped) == 0)
 240                         csa->prob.spu_status_R = SPU_STATUS_RUNNING;
 241                 else
 242                         csa->prob.spu_status_R = in_be32(&prob->spu_status_R);
 243         }
 244 }
 245
 246 static inline void save_mfc_decr(struct spu_state *csa, struct spu *spu)
 247 {
 248         struct spu_priv2 __iomem *priv2 = spu->priv2;
 249
 250         /* Save, Step 12:
 251          *     Read MFC_CNTL[Ds].  Update saved copy of
 252          *     CSA.MFC_CNTL[Ds].
 253          */
 254         csa->priv2.mfc_control_RW |=
 255                 in_be64(&priv2->mfc_control_RW) & MFC_CNTL_DECREMENTER_RUNNING;
 256 }
 257
 258 static inline void halt_mfc_decr(struct spu_state *csa, struct spu *spu)
 259 {
 260         struct spu_priv2 __iomem *priv2 = spu->priv2;
 261
 262         /* Save, Step 13:
 263          *     Write MFC_CNTL[Dh] set to a '1' to halt
 264          *     the decrementer.
 265          */
 266         out_be64(&priv2->mfc_control_RW,
 267                  MFC_CNTL_DECREMENTER_HALTED | MFC_CNTL_SUSPEND_MASK);
 268         eieio();
 269 }
 270
 271 static inline void save_timebase(struct spu_state *csa, struct spu *spu)
 272 {
 273         /* Save, Step 14:
 274          *    Read PPE Timebase High and Timebase low registers
 275          *    and save in CSA.  TBD.
 276          */
 277         csa->suspend_time = get_cycles();
 278 }
 279
 280 static inline void remove_other_spu_access(struct spu_state *csa,
 281                                            struct spu *spu)
 282 {
 283         /* Save, Step 15:
 284          *     Remove other SPU access to this SPU by unmapping
 285          *     this SPU's pages from their address space.  TBD.
 286          */
 287 }
 288
 289 static inline void do_mfc_mssync(struct spu_state *csa, struct spu *spu)
 290 {
 291         struct spu_problem __iomem *prob = spu->problem;
 292
 293         /* Save, Step 16:
 294          * Restore, Step 11.
 295          *     Write SPU_MSSync register. Poll SPU_MSSync[P]
 296          *     for a value of 0.
 297          */
 298         out_be64(&prob->spc_mssync_RW, 1UL);
 299         POLL_WHILE_TRUE(in_be64(&prob->spc_mssync_RW) & MS_SYNC_PENDING);
 300 }
 301
 302 static inline void issue_mfc_tlbie(struct spu_state *csa, struct spu *spu)
 303 {
 304         /* Save, Step 17:
 305          * Restore, Step 12.
 306          * Restore, Step 48.
 307          *     Write TLB_Invalidate_Entry[IS,VPN,L,Lp]=0 register.
 308          *     Then issue a PPE sync instruction.
 309          */
 310         spu_tlb_invalidate(spu);
 311         mb();
 312 }
 313
 314 static inline void handle_pending_interrupts(struct spu_state *csa,
 315                                              struct spu *spu)
 316 {
 317         /* Save, Step 18:
 318          *     Handle any pending interrupts from this SPU
 319          *     here.  This is OS or hypervisor specific.  One
 320          *     option is to re-enable interrupts to handle any
 321          *     pending interrupts, with the interrupt handlers
 322          *     recognizing the software Context Switch Pending
 323          *     flag, to ensure the SPU execution or MFC command
 324          *     queue is not restarted.  TBD.
 325          */
 326 }
 327
 328 static inline void save_mfc_queues(struct spu_state *csa, struct spu *spu)
 329 {
 330         struct spu_priv2 __iomem *priv2 = spu->priv2;
 331         int i;
 332
 333         /* Save, Step 19:
 334          *     If MFC_Cntl[Se]=0 then save
 335          *     MFC command queues.
 336          */
 337         if ((in_be64(&priv2->mfc_control_RW) & MFC_CNTL_DMA_QUEUES_EMPTY) == 0) {
 338                 for (i = 0; i < 8; i++) {
 339                         csa->priv2.puq[i].mfc_cq_data0_RW =
 340                             in_be64(&priv2->puq[i].mfc_cq_data0_RW);
 341                         csa->priv2.puq[i].mfc_cq_data1_RW =
 342                             in_be64(&priv2->puq[i].mfc_cq_data1_RW);
 343                         csa->priv2.puq[i].mfc_cq_data2_RW =
 344                             in_be64(&priv2->puq[i].mfc_cq_data2_RW);
 345                         csa->priv2.puq[i].mfc_cq_data3_RW =
 346                             in_be64(&priv2->puq[i].mfc_cq_data3_RW);
 347                 }
 348                 for (i = 0; i < 16; i++) {
 349                         csa->priv2.spuq[i].mfc_cq_data0_RW =
 350                             in_be64(&priv2->spuq[i].mfc_cq_data0_RW);
 351                         csa->priv2.spuq[i].mfc_cq_data1_RW =
 352                             in_be64(&priv2->spuq[i].mfc_cq_data1_RW);
 353                         csa->priv2.spuq[i].mfc_cq_data2_RW =
 354                             in_be64(&priv2->spuq[i].mfc_cq_data2_RW);
 355                         csa->priv2.spuq[i].mfc_cq_data3_RW =
 356                             in_be64(&priv2->spuq[i].mfc_cq_data3_RW);
 357                 }
 358         }
 359 }
 360
 361 static inline void save_ppu_querymask(struct spu_state *csa, struct spu *spu)
 362 {
 363         struct spu_problem __iomem *prob = spu->problem;
 364
 365         /* Save, Step 20:
 366          *     Save the PPU_QueryMask register
 367          *     in the CSA.
 368          */
 369         csa->prob.dma_querymask_RW = in_be32(&prob->dma_querymask_RW);
 370 }
 371
 372 static inline void save_ppu_querytype(struct spu_state *csa, struct spu *spu)
 373 {
 374         struct spu_problem __iomem *prob = spu->problem;
 375
 376         /* Save, Step 21:
 377          *     Save the PPU_QueryType register
 378          *     in the CSA.
 379          */
 380         csa->prob.dma_querytype_RW = in_be32(&prob->dma_querytype_RW);
 381 }
 382
 383 static inline void save_ppu_tagstatus(struct spu_state *csa, struct spu *spu)
 384 {
 385         struct spu_problem __iomem *prob = spu->problem;
 386
 387         /* Save the Prxy_TagStatus register in the CSA.
 388          *
 389          * It is unnecessary to restore dma_tagstatus_R, however,
 390          * dma_tagstatus_R in the CSA is accessed via backing_ops, so
 391          * we must save it.
 392          */
 393         csa->prob.dma_tagstatus_R = in_be32(&prob->dma_tagstatus_R);
 394 }
 395
 396 static inline void save_mfc_csr_tsq(struct spu_state *csa, struct spu *spu)
 397 {
 398         struct spu_priv2 __iomem *priv2 = spu->priv2;
 399
 400         /* Save, Step 22:
 401          *     Save the MFC_CSR_TSQ register
 402          *     in the LSCSA.
 403          */
 404         csa->priv2.spu_tag_status_query_RW =
 405             in_be64(&priv2->spu_tag_status_query_RW);
 406 }
 407
 408 static inline void save_mfc_csr_cmd(struct spu_state *csa, struct spu *spu)
 409 {
 410         struct spu_priv2 __iomem *priv2 = spu->priv2;
 411
 412         /* Save, Step 23:
 413          *     Save the MFC_CSR_CMD1 and MFC_CSR_CMD2
 414          *     registers in the CSA.
 415          */
 416         csa->priv2.spu_cmd_buf1_RW = in_be64(&priv2->spu_cmd_buf1_RW);
 417         csa->priv2.spu_cmd_buf2_RW = in_be64(&priv2->spu_cmd_buf2_RW);
 418 }
 419
 420 static inline void save_mfc_csr_ato(struct spu_state *csa, struct spu *spu)
 421 {
 422         struct spu_priv2 __iomem *priv2 = spu->priv2;
 423
 424         /* Save, Step 24:
 425          *     Save the MFC_CSR_ATO register in
 426          *     the CSA.
 427          */
 428         csa->priv2.spu_atomic_status_RW = in_be64(&priv2->spu_atomic_status_RW);
 429 }
 430
 431 static inline void save_mfc_tclass_id(struct spu_state *csa, struct spu *spu)
 432 {
 433         /* Save, Step 25:
 434          *     Save the MFC_TCLASS_ID register in
 435          *     the CSA.
 436          */
 437         csa->priv1.mfc_tclass_id_RW = spu_mfc_tclass_id_get(spu);
 438 }
 439
 440 static inline void set_mfc_tclass_id(struct spu_state *csa, struct spu *spu)
 441 {
 442         /* Save, Step 26:
 443          * Restore, Step 23.
 444          *     Write the MFC_TCLASS_ID register with
 445          *     the value 0x10000000.
 446          */
 447         spu_mfc_tclass_id_set(spu, 0x10000000);
 448         eieio();
 449 }
 450
 451 static inline void purge_mfc_queue(struct spu_state *csa, struct spu *spu)
 452 {
 453         struct spu_priv2 __iomem *priv2 = spu->priv2;
 454
 455         /* Save, Step 27:
 456          * Restore, Step 14.
 457          *     Write MFC_CNTL[Pc]=1 (purge queue).
 458          */
 459         out_be64(&priv2->mfc_control_RW, MFC_CNTL_PURGE_DMA_REQUEST);
 460         eieio();
 461 }
 462
 463 static inline void wait_purge_complete(struct spu_state *csa, struct spu *spu)
 464 {
 465         struct spu_priv2 __iomem *priv2 = spu->priv2;
 466
 467         /* Save, Step 28:
 468          *     Poll MFC_CNTL[Ps] until value '11' is read
 469          *     (purge complete).
 470          */
 471         POLL_WHILE_FALSE((in_be64(&priv2->mfc_control_RW) &
 472                          MFC_CNTL_PURGE_DMA_STATUS_MASK) ==
 473                          MFC_CNTL_PURGE_DMA_COMPLETE);
 474 }
 475
 476 static inline void setup_mfc_sr1(struct spu_state *csa, struct spu *spu)
 477 {
 478         /* Save, Step 30:
 479          * Restore, Step 18:
 480          *     Write MFC_SR1 with MFC_SR1[D=0,S=1] and
 481          *     MFC_SR1[TL,R,Pr,T] set correctly for the
 482          *     OS specific environment.
 483          *
 484          *     Implementation note: The SPU-side code
 485          *     for save/restore is privileged, so the
 486          *     MFC_SR1[Pr] bit is not set.
 487          *
 488          */
 489         spu_mfc_sr1_set(spu, (MFC_STATE1_MASTER_RUN_CONTROL_MASK |
 490                               MFC_STATE1_RELOCATE_MASK |
 491                               MFC_STATE1_BUS_TLBIE_MASK));
 492 }
 493
 494 static inline void save_spu_npc(struct spu_state *csa, struct spu *spu)
 495 {
 496         struct spu_problem __iomem *prob = spu->problem;
 497
 498         /* Save, Step 31:
 499          *     Save SPU_NPC in the CSA.
 500          */
 501         csa->prob.spu_npc_RW = in_be32(&prob->spu_npc_RW);
 502 }
 503
 504 static inline void save_spu_privcntl(struct spu_state *csa, struct spu *spu)
 505 {
 506         struct spu_priv2 __iomem *priv2 = spu->priv2;
 507
 508         /* Save, Step 32:
 509          *     Save SPU_PrivCntl in the CSA.
 510          */
 511         csa->priv2.spu_privcntl_RW = in_be64(&priv2->spu_privcntl_RW);
 512 }
 513
 514 static inline void reset_spu_privcntl(struct spu_state *csa, struct spu *spu)
 515 {
 516         struct spu_priv2 __iomem *priv2 = spu->priv2;
 517
 518         /* Save, Step 33:
 519          * Restore, Step 16:
 520          *     Write SPU_PrivCntl[S,Le,A] fields reset to 0.
 521          */
 522         out_be64(&priv2->spu_privcntl_RW, 0UL);
 523         eieio();
 524 }
 525
 526 static inline void save_spu_lslr(struct spu_state *csa, struct spu *spu)
 527 {
 528         struct spu_priv2 __iomem *priv2 = spu->priv2;
 529
 530         /* Save, Step 34:
 531          *     Save SPU_LSLR in the CSA.
 532          */
 533         csa->priv2.spu_lslr_RW = in_be64(&priv2->spu_lslr_RW);
 534 }
 535
 536 static inline void reset_spu_lslr(struct spu_state *csa, struct spu *spu)
 537 {
 538         struct spu_priv2 __iomem *priv2 = spu->priv2;
 539
 540         /* Save, Step 35:
 541          * Restore, Step 17.
 542          *     Reset SPU_LSLR.
 543          */
 544         out_be64(&priv2->spu_lslr_RW, LS_ADDR_MASK);
 545         eieio();
 546 }
 547
 548 static inline void save_spu_cfg(struct spu_state *csa, struct spu *spu)
 549 {
 550         struct spu_priv2 __iomem *priv2 = spu->priv2;
 551
 552         /* Save, Step 36:
 553          *     Save SPU_Cfg in the CSA.
 554          */
 555         csa->priv2.spu_cfg_RW = in_be64(&priv2->spu_cfg_RW);
 556 }
 557
 558 static inline void save_pm_trace(struct spu_state *csa, struct spu *spu)
 559 {
 560         /* Save, Step 37:
 561          *     Save PM_Trace_Tag_Wait_Mask in the CSA.
 562          *     Not performed by this implementation.
 563          */
 564 }
 565
 566 static inline void save_mfc_rag(struct spu_state *csa, struct spu *spu)
 567 {
 568         /* Save, Step 38:
 569          *     Save RA_GROUP_ID register and the
 570          *     RA_ENABLE reigster in the CSA.
 571          */
 572         csa->priv1.resource_allocation_groupID_RW =
 573                 spu_resource_allocation_groupID_get(spu);
 574         csa->priv1.resource_allocation_enable_RW =
 575                 spu_resource_allocation_enable_get(spu);
 576 }
 577
 578 static inline void save_ppu_mb_stat(struct spu_state *csa, struct spu *spu)
 579 {
 580         struct spu_problem __iomem *prob = spu->problem;
 581
 582         /* Save, Step 39:
 583          *     Save MB_Stat register in the CSA.
 584          */
 585         csa->prob.mb_stat_R = in_be32(&prob->mb_stat_R);
 586 }
 587
 588 static inline void save_ppu_mb(struct spu_state *csa, struct spu *spu)
 589 {
 590         struct spu_problem __iomem *prob = spu->problem;
 591
 592         /* Save, Step 40:
 593          *     Save the PPU_MB register in the CSA.
 594          */
 595         csa->prob.pu_mb_R = in_be32(&prob->pu_mb_R);
 596 }
 597
 598 static inline void save_ppuint_mb(struct spu_state *csa, struct spu *spu)
 599 {
 600         struct spu_priv2 __iomem *priv2 = spu->priv2;
 601
 602         /* Save, Step 41:
 603          *     Save the PPUINT_MB register in the CSA.
 604          */
 605         csa->priv2.puint_mb_R = in_be64(&priv2->puint_mb_R);
 606 }
 607
 608 static inline void save_ch_part1(struct spu_state *csa, struct spu *spu)
 609 {
 610         struct spu_priv2 __iomem *priv2 = spu->priv2;
 611         u64 idx, ch_indices[] = { 0UL, 3UL, 4UL, 24UL, 25UL, 27UL };
 612         int i;
 613
 614         /* Save, Step 42:
 615          */
 616
 617         /* Save CH 1, without channel count */
 618         out_be64(&priv2->spu_chnlcntptr_RW, 1);
 619         csa->spu_chnldata_RW[1] = in_be64(&priv2->spu_chnldata_RW);
 620
 621         /* Save the following CH: [0,3,4,24,25,27] */
 622         for (i = 0; i < ARRAY_SIZE(ch_indices); i++) {
 623                 idx = ch_indices[i];
 624                 out_be64(&priv2->spu_chnlcntptr_RW, idx);
 625                 eieio();
 626                 csa->spu_chnldata_RW[idx] = in_be64(&priv2->spu_chnldata_RW);
 627                 csa->spu_chnlcnt_RW[idx] = in_be64(&priv2->spu_chnlcnt_RW);
 628                 out_be64(&priv2->spu_chnldata_RW, 0UL);
 629                 out_be64(&priv2->spu_chnlcnt_RW, 0UL);
 630                 eieio();
 631         }
 632 }
 633
 634 static inline void save_spu_mb(struct spu_state *csa, struct spu *spu)
 635 {
 636         struct spu_priv2 __iomem *priv2 = spu->priv2;
 637         int i;
 638
 639         /* Save, Step 43:
 640          *     Save SPU Read Mailbox Channel.
 641          */
 642         out_be64(&priv2->spu_chnlcntptr_RW, 29UL);
 643         eieio();
 644         csa->spu_chnlcnt_RW[29] = in_be64(&priv2->spu_chnlcnt_RW);
 645         for (i = 0; i < 4; i++) {
 646                 csa->spu_mailbox_data[i] = in_be64(&priv2->spu_chnldata_RW);
 647         }
 648         out_be64(&priv2->spu_chnlcnt_RW, 0UL);
 649         eieio();
 650 }
 651
 652 static inline void save_mfc_cmd(struct spu_state *csa, struct spu *spu)
 653 {
 654         struct spu_priv2 __iomem *priv2 = spu->priv2;
 655
 656         /* Save, Step 44:
 657          *     Save MFC_CMD Channel.
 658          */
 659         out_be64(&priv2->spu_chnlcntptr_RW, 21UL);
 660         eieio();
 661         csa->spu_chnlcnt_RW[21] = in_be64(&priv2->spu_chnlcnt_RW);
 662         eieio();
 663 }
 664
 665 static inline void reset_ch(struct spu_state *csa, struct spu *spu)
 666 {
 667         struct spu_priv2 __iomem *priv2 = spu->priv2;
 668         u64 ch_indices[4] = { 21UL, 23UL, 28UL, 30UL };
 669         u64 ch_counts[4] = { 16UL, 1UL, 1UL, 1UL };
 670         u64 idx;
 671         int i;
 672
 673         /* Save, Step 45:
 674          *     Reset the following CH: [21, 23, 28, 30]
 675          */
 676         for (i = 0; i < 4; i++) {
 677                 idx = ch_indices[i];
 678                 out_be64(&priv2->spu_chnlcntptr_RW, idx);
 679                 eieio();
 680                 out_be64(&priv2->spu_chnlcnt_RW, ch_counts[i]);
 681                 eieio();
 682         }
 683 }
 684
 685 static inline void resume_mfc_queue(struct spu_state *csa, struct spu *spu)
 686 {
 687         struct spu_priv2 __iomem *priv2 = spu->priv2;
 688
 689         /* Save, Step 46:
 690          * Restore, Step 25.
 691          *     Write MFC_CNTL[Sc]=0 (resume queue processing).
 692          */
 693         out_be64(&priv2->mfc_control_RW, MFC_CNTL_RESUME_DMA_QUEUE);
 694 }
 695
 696 static inline void setup_mfc_slbs(struct spu_state *csa, struct spu *spu,
 697                 unsigned int *code, int code_size)
 698 {
 699         /* Save, Step 47:
 700          * Restore, Step 30.
 701          *     If MFC_SR1[R]=1, write 0 to SLB_Invalidate_All
 702          *     register, then initialize SLB_VSID and SLB_ESID
 703          *     to provide access to SPU context save code and
 704          *     LSCSA.
 705          *
 706          *     This implementation places both the context
 707          *     switch code and LSCSA in kernel address space.
 708          *
 709          *     Further this implementation assumes that the
 710          *     MFC_SR1[R]=1 (in other words, assume that
 711          *     translation is desired by OS environment).
 712          */
 713         spu_invalidate_slbs(spu);
 714         spu_setup_kernel_slbs(spu, csa->lscsa, code, code_size);
 715 }
 716
 717 static inline void set_switch_active(struct spu_state *csa, struct spu *spu)
 718 {
 719         /* Save, Step 48:
 720          * Restore, Step 23.
 721          *     Change the software context switch pending flag
 722          *     to context switch active.
 723          *
 724          *     This implementation does not uses a switch active flag.
 725          */
 726         clear_bit(SPU_CONTEXT_SWITCH_PENDING, &spu->flags);
 727         mb();
 728 }
 729
 730 static inline void enable_interrupts(struct spu_state *csa, struct spu *spu)
 731 {
 732         unsigned long class1_mask = CLASS1_ENABLE_SEGMENT_FAULT_INTR |
 733             CLASS1_ENABLE_STORAGE_FAULT_INTR;
 734
 735         /* Save, Step 49:
 736          * Restore, Step 22:
 737          *     Reset and then enable interrupts, as
 738          *     needed by OS.
 739          *
 740          *     This implementation enables only class1
 741          *     (translation) interrupts.
 742          */
 743         spin_lock_irq(&spu->register_lock);
 744         spu_int_stat_clear(spu, 0, CLASS0_INTR_MASK);
 745         spu_int_stat_clear(spu, 1, CLASS1_INTR_MASK);
 746         spu_int_stat_clear(spu, 2, CLASS2_INTR_MASK);
 747         spu_int_mask_set(spu, 0, 0ul);
 748         spu_int_mask_set(spu, 1, class1_mask);
 749         spu_int_mask_set(spu, 2, 0ul);
 750         spin_unlock_irq(&spu->register_lock);
 751 }
 752
 753 static inline int send_mfc_dma(struct spu *spu, unsigned long ea,
 754                                unsigned int ls_offset, unsigned int size,
 755                                unsigned int tag, unsigned int rclass,
 756                                unsigned int cmd)
 757 {
 758         struct spu_problem __iomem *prob = spu->problem;
 759         union mfc_tag_size_class_cmd command;
 760         unsigned int transfer_size;
 761         volatile unsigned int status = 0x0;
 762
 763         while (size > 0) {
 764                 transfer_size =
 765                     (size > MFC_MAX_DMA_SIZE) ? MFC_MAX_DMA_SIZE : size;
 766                 command.u.mfc_size = transfer_size;
 767                 command.u.mfc_tag = tag;
 768                 command.u.mfc_rclassid = rclass;
 769                 command.u.mfc_cmd = cmd;
 770                 do {
 771                         out_be32(&prob->mfc_lsa_W, ls_offset);
 772                         out_be64(&prob->mfc_ea_W, ea);
 773                         out_be64(&prob->mfc_union_W.all64, command.all64);
 774                         status =
 775                             in_be32(&prob->mfc_union_W.by32.mfc_class_cmd32);
 776                         if (unlikely(status & 0x2)) {
 777                                 cpu_relax();
 778                         }
 779                 } while (status & 0x3);
 780                 size -= transfer_size;
 781                 ea += transfer_size;
 782                 ls_offset += transfer_size;
 783         }
 784         return 0;
 785 }
 786
 787 static inline void save_ls_16kb(struct spu_state *csa, struct spu *spu)
 788 {
 789         unsigned long addr = (unsigned long)&csa->lscsa->ls[0];
 790         unsigned int ls_offset = 0x0;
 791         unsigned int size = 16384;
 792         unsigned int tag = 0;
 793         unsigned int rclass = 0;
 794         unsigned int cmd = MFC_PUT_CMD;
 795
 796         /* Save, Step 50:
 797          *     Issue a DMA command to copy the first 16K bytes
 798          *     of local storage to the CSA.
 799          */
 800         send_mfc_dma(spu, addr, ls_offset, size, tag, rclass, cmd);
 801 }
 802
 803 static inline void set_spu_npc(struct spu_state *csa, struct spu *spu)
 804 {
 805         struct spu_problem __iomem *prob = spu->problem;
 806
 807         /* Save, Step 51:
 808          * Restore, Step 31.
 809          *     Write SPU_NPC[IE]=0 and SPU_NPC[LSA] to entry
 810          *     point address of context save code in local
 811          *     storage.
 812          *
 813          *     This implementation uses SPU-side save/restore
 814          *     programs with entry points at LSA of 0.
 815          */
 816         out_be32(&prob->spu_npc_RW, 0);
 817         eieio();
 818 }
 819
 820 static inline void set_signot1(struct spu_state *csa, struct spu *spu)
 821 {
 822         struct spu_problem __iomem *prob = spu->problem;
 823         union {
 824                 u64 ull;
 825                 u32 ui[2];
 826         } addr64;
 827
 828         /* Save, Step 52:
 829          * Restore, Step 32:
 830          *    Write SPU_Sig_Notify_1 register with upper 32-bits
 831          *    of the CSA.LSCSA effective address.
 832          */
 833         addr64.ull = (u64) csa->lscsa;
 834         out_be32(&prob->signal_notify1, addr64.ui[0]);
 835         eieio();
 836 }
 837
 838 static inline void set_signot2(struct spu_state *csa, struct spu *spu)
 839 {
 840         struct spu_problem __iomem *prob = spu->problem;
 841         union {
 842                 u64 ull;
 843                 u32 ui[2];
 844         } addr64;
 845
 846         /* Save, Step 53:
 847          * Restore, Step 33:
 848          *    Write SPU_Sig_Notify_2 register with lower 32-bits
 849          *    of the CSA.LSCSA effective address.
 850          */
 851         addr64.ull = (u64) csa->lscsa;
 852         out_be32(&prob->signal_notify2, addr64.ui[1]);
 853         eieio();
 854 }
 855
 856 static inline void send_save_code(struct spu_state *csa, struct spu *spu)
 857 {
 858         unsigned long addr = (unsigned long)&spu_save_code[0];
 859         unsigned int ls_offset = 0x0;
 860         unsigned int size = sizeof(spu_save_code);
 861         unsigned int tag = 0;
 862         unsigned int rclass = 0;
 863         unsigned int cmd = MFC_GETFS_CMD;
 864
 865         /* Save, Step 54:
 866          *     Issue a DMA command to copy context save code
 867          *     to local storage and start SPU.
 868          */
 869         send_mfc_dma(spu, addr, ls_offset, size, tag, rclass, cmd);
 870 }
 871
 872 static inline void set_ppu_querymask(struct spu_state *csa, struct spu *spu)
 873 {
 874         struct spu_problem __iomem *prob = spu->problem;
 875
 876         /* Save, Step 55:
 877          * Restore, Step 38.
 878          *     Write PPU_QueryMask=1 (enable Tag Group 0)
 879          *     and issue eieio instruction.
 880          */
 881         out_be32(&prob->dma_querymask_RW, MFC_TAGID_TO_TAGMASK(0));
 882         eieio();
 883 }
 884
 885 static inline void wait_tag_complete(struct spu_state *csa, struct spu *spu)
 886 {
 887         struct spu_problem __iomem *prob = spu->problem;
 888         u32 mask = MFC_TAGID_TO_TAGMASK(0);
 889         unsigned long flags;
 890
 891         /* Save, Step 56:
 892          * Restore, Step 39.
 893          * Restore, Step 39.
 894          * Restore, Step 46.
 895          *     Poll PPU_TagStatus[gn] until 01 (Tag group 0 complete)
 896          *     or write PPU_QueryType[TS]=01 and wait for Tag Group
 897          *     Complete Interrupt.  Write INT_Stat_Class0 or
 898          *     INT_Stat_Class2 with value of 'handled'.
 899          */
 900         POLL_WHILE_FALSE(in_be32(&prob->dma_tagstatus_R) & mask);
 901
 902         local_irq_save(flags);
 903         spu_int_stat_clear(spu, 0, CLASS0_INTR_MASK);
 904         spu_int_stat_clear(spu, 2, CLASS2_INTR_MASK);
 905         local_irq_restore(flags);
 906 }
 907
 908 static inline void wait_spu_stopped(struct spu_state *csa, struct spu *spu)
 909 {
 910         struct spu_problem __iomem *prob = spu->problem;
 911         unsigned long flags;
 912
 913         /* Save, Step 57:
 914          * Restore, Step 40.
 915          *     Poll until SPU_Status[R]=0 or wait for SPU Class 0
 916          *     or SPU Class 2 interrupt.  Write INT_Stat_class0
 917          *     or INT_Stat_class2 with value of handled.
 918          */
 919         POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) & SPU_STATUS_RUNNING);
 920
 921         local_irq_save(flags);
 922         spu_int_stat_clear(spu, 0, CLASS0_INTR_MASK);
 923         spu_int_stat_clear(spu, 2, CLASS2_INTR_MASK);
 924         local_irq_restore(flags);
 925 }
 926
 927 static inline int check_save_status(struct spu_state *csa, struct spu *spu)
 928 {
 929         struct spu_problem __iomem *prob = spu->problem;
 930         u32 complete;
 931
 932         /* Save, Step 54:
 933          *     If SPU_Status[P]=1 and SPU_Status[SC] = "success",
 934          *     context save succeeded, otherwise context save
 935          *     failed.
 936          */
 937         complete = ((SPU_SAVE_COMPLETE << SPU_STOP_STATUS_SHIFT) |
 938                     SPU_STATUS_STOPPED_BY_STOP);
 939         return (in_be32(&prob->spu_status_R) != complete) ? 1 : 0;
 940 }
 941
 942 static inline void terminate_spu_app(struct spu_state *csa, struct spu *spu)
 943 {
 944         /* Restore, Step 4:
 945          *    If required, notify the "using application" that
 946          *    the SPU task has been terminated.  TBD.
 947          */
 948 }
 949
 950 static inline void suspend_mfc_and_halt_decr(struct spu_state *csa,
 951                 struct spu *spu)
 952 {
 953         struct spu_priv2 __iomem *priv2 = spu->priv2;
 954
 955         /* Restore, Step 7:
 956          *     Write MFC_Cntl[Dh,Sc,Sm]='1','1','0' to suspend
 957          *     the queue and halt the decrementer.
 958          */
 959         out_be64(&priv2->mfc_control_RW, MFC_CNTL_SUSPEND_DMA_QUEUE |
 960                  MFC_CNTL_DECREMENTER_HALTED);
 961         eieio();
 962 }
 963
 964 static inline void wait_suspend_mfc_complete(struct spu_state *csa,
 965                                              struct spu *spu)
 966 {
 967         struct spu_priv2 __iomem *priv2 = spu->priv2;
 968
 969         /* Restore, Step 8:
 970          * Restore, Step 47.
 971          *     Poll MFC_CNTL[Ss] until 11 is returned.
 972          */
 973         POLL_WHILE_FALSE((in_be64(&priv2->mfc_control_RW) &
 974                          MFC_CNTL_SUSPEND_DMA_STATUS_MASK) ==
 975                          MFC_CNTL_SUSPEND_COMPLETE);
 976 }
 977
 978 static inline int suspend_spe(struct spu_state *csa, struct spu *spu)
 979 {
 980         struct spu_problem __iomem *prob = spu->problem;
 981
 982         /* Restore, Step 9:
 983          *    If SPU_Status[R]=1, stop SPU execution
 984          *    and wait for stop to complete.
 985          *
 986          *    Returns       1 if SPU_Status[R]=1 on entry.
 987          *                  0 otherwise
 988          */
 989         if (in_be32(&prob->spu_status_R) & SPU_STATUS_RUNNING) {
 990                 if (in_be32(&prob->spu_status_R) &
 991                     SPU_STATUS_ISOLATED_EXIT_STATUS) {
 992                         POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
 993                                         SPU_STATUS_RUNNING);
 994                 }
 995                 if ((in_be32(&prob->spu_status_R) &
 996                      SPU_STATUS_ISOLATED_LOAD_STATUS)
 997                     || (in_be32(&prob->spu_status_R) &
 998                         SPU_STATUS_ISOLATED_STATE)) {
 999                         out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_STOP);
1000                         eieio();
1001                         POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
1002                                         SPU_STATUS_RUNNING);
1003                         out_be32(&prob->spu_runcntl_RW, 0x2);
1004                         eieio();
1005                         POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
1006                                         SPU_STATUS_RUNNING);
1007                 }
1008                 if (in_be32(&prob->spu_status_R) &
1009                     SPU_STATUS_WAITING_FOR_CHANNEL) {
1010                         out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_STOP);
1011                         eieio();
1012                         POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
1013                                         SPU_STATUS_RUNNING);
1014                 }
1015                 return 1;
1016         }
1017         return 0;
1018 }
1019
1020 static inline void clear_spu_status(struct spu_state *csa, struct spu *spu)
1021 {
1022         struct spu_problem __iomem *prob = spu->problem;
1023
1024         /* Restore, Step 10:
1025          *    If SPU_Status[R]=0 and SPU_Status[E,L,IS]=1,
1026          *    release SPU from isolate state.
1027          */
1028         if (!(in_be32(&prob->spu_status_R) & SPU_STATUS_RUNNING)) {
1029                 if (in_be32(&prob->spu_status_R) &
1030                     SPU_STATUS_ISOLATED_EXIT_STATUS) {
1031                         spu_mfc_sr1_set(spu,
1032                                         MFC_STATE1_MASTER_RUN_CONTROL_MASK);
1033                         eieio();
1034                         out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_RUNNABLE);
1035                         eieio();
1036                         POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
1037                                         SPU_STATUS_RUNNING);
1038                 }
1039                 if ((in_be32(&prob->spu_status_R) &
1040                      SPU_STATUS_ISOLATED_LOAD_STATUS)
1041                     || (in_be32(&prob->spu_status_R) &
1042                         SPU_STATUS_ISOLATED_STATE)) {
1043                         spu_mfc_sr1_set(spu,
1044                                         MFC_STATE1_MASTER_RUN_CONTROL_MASK);
1045                         eieio();
1046                         out_be32(&prob->spu_runcntl_RW, 0x2);
1047                         eieio();
1048                         POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
1049                                         SPU_STATUS_RUNNING);
1050                 }
1051         }
1052 }
1053
1054 static inline void reset_ch_part1(struct spu_state *csa, struct spu *spu)
1055 {
1056         struct spu_priv2 __iomem *priv2 = spu->priv2;
1057         u64 ch_indices[] = { 0UL, 3UL, 4UL, 24UL, 25UL, 27UL };
1058         u64 idx;
1059         int i;
1060
1061         /* Restore, Step 20:
1062          */
1063
1064         /* Reset CH 1 */
1065         out_be64(&priv2->spu_chnlcntptr_RW, 1);
1066         out_be64(&priv2->spu_chnldata_RW, 0UL);
1067
1068         /* Reset the following CH: [0,3,4,24,25,27] */
1069         for (i = 0; i < ARRAY_SIZE(ch_indices); i++) {
1070                 idx = ch_indices[i];
1071                 out_be64(&priv2->spu_chnlcntptr_RW, idx);
1072                 eieio();
1073                 out_be64(&priv2->spu_chnldata_RW, 0UL);
1074                 out_be64(&priv2->spu_chnlcnt_RW, 0UL);
1075                 eieio();
1076         }
1077 }
1078
1079 static inline void reset_ch_part2(struct spu_state *csa, struct spu *spu)
1080 {
1081         struct spu_priv2 __iomem *priv2 = spu->priv2;
1082         u64 ch_indices[5] = { 21UL, 23UL, 28UL, 29UL, 30UL };
1083         u64 ch_counts[5] = { 16UL, 1UL, 1UL, 0UL, 1UL };
1084         u64 idx;
1085         int i;
1086
1087         /* Restore, Step 21:
1088          *     Reset the following CH: [21, 23, 28, 29, 30]
1089          */
1090         for (i = 0; i < 5; i++) {
1091                 idx = ch_indices[i];
1092                 out_be64(&priv2->spu_chnlcntptr_RW, idx);
1093                 eieio();
1094                 out_be64(&priv2->spu_chnlcnt_RW, ch_counts[i]);
1095                 eieio();
1096         }
1097 }
1098
1099 static inline void setup_spu_status_part1(struct spu_state *csa,
1100                                           struct spu *spu)
1101 {
1102         u32 status_P = SPU_STATUS_STOPPED_BY_STOP;
1103         u32 status_I = SPU_STATUS_INVALID_INSTR;
1104         u32 status_H = SPU_STATUS_STOPPED_BY_HALT;
1105         u32 status_S = SPU_STATUS_SINGLE_STEP;
1106         u32 status_S_I = SPU_STATUS_SINGLE_STEP | SPU_STATUS_INVALID_INSTR;
1107         u32 status_S_P = SPU_STATUS_SINGLE_STEP | SPU_STATUS_STOPPED_BY_STOP;
1108         u32 status_P_H = SPU_STATUS_STOPPED_BY_HALT |SPU_STATUS_STOPPED_BY_STOP;
1109         u32 status_P_I = SPU_STATUS_STOPPED_BY_STOP |SPU_STATUS_INVALID_INSTR;
1110         u32 status_code;
1111
1112         /* Restore, Step 27:
1113          *     If the CSA.SPU_Status[I,S,H,P]=1 then add the correct
1114          *     instruction sequence to the end of the SPU based restore
1115          *     code (after the "context restored" stop and signal) to
1116          *     restore the correct SPU status.
1117          *
1118          *     NOTE: Rather than modifying the SPU executable, we
1119          *     instead add a new 'stopped_status' field to the
1120          *     LSCSA.  The SPU-side restore reads this field and
1121          *     takes the appropriate action when exiting.
1122          */
1123
1124         status_code =
1125             (csa->prob.spu_status_R >> SPU_STOP_STATUS_SHIFT) & 0xFFFF;
1126         if ((csa->prob.spu_status_R & status_P_I) == status_P_I) {
1127
1128                 /* SPU_Status[P,I]=1 - Illegal Instruction followed
1129                  * by Stop and Signal instruction, followed by 'br -4'.
1130                  *
1131                  */
1132                 csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_P_I;
1133                 csa->lscsa->stopped_status.slot[1] = status_code;
1134
1135         } else if ((csa->prob.spu_status_R & status_P_H) == status_P_H) {
1136
1137                 /* SPU_Status[P,H]=1 - Halt Conditional, followed
1138                  * by Stop and Signal instruction, followed by
1139                  * 'br -4'.
1140                  */
1141                 csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_P_H;
1142                 csa->lscsa->stopped_status.slot[1] = status_code;
1143
1144         } else if ((csa->prob.spu_status_R & status_S_P) == status_S_P) {
1145
1146                 /* SPU_Status[S,P]=1 - Stop and Signal instruction
1147                  * followed by 'br -4'.
1148                  */
1149                 csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_S_P;
1150                 csa->lscsa->stopped_status.slot[1] = status_code;
1151
1152         } else if ((csa->prob.spu_status_R & status_S_I) == status_S_I) {
1153
1154                 /* SPU_Status[S,I]=1 - Illegal instruction followed
1155                  * by 'br -4'.
1156                  */
1157                 csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_S_I;
1158                 csa->lscsa->stopped_status.slot[1] = status_code;
1159
1160         } else if ((csa->prob.spu_status_R & status_P) == status_P) {
1161
1162                 /* SPU_Status[P]=1 - Stop and Signal instruction
1163                  * followed by 'br -4'.
1164                  */
1165                 csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_P;
1166                 csa->lscsa->stopped_status.slot[1] = status_code;
1167
1168         } else if ((csa->prob.spu_status_R & status_H) == status_H) {
1169
1170                 /* SPU_Status[H]=1 - Halt Conditional, followed
1171                  * by 'br -4'.
1172                  */
1173                 csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_H;
1174
1175         } else if ((csa->prob.spu_status_R & status_S) == status_S) {
1176
1177                 /* SPU_Status[S]=1 - Two nop instructions.
1178                  */
1179                 csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_S;
1180
1181         } else if ((csa->prob.spu_status_R & status_I) == status_I) {
1182
1183                 /* SPU_Status[I]=1 - Illegal instruction followed
1184                  * by 'br -4'.
1185                  */
1186                 csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_I;
1187
1188         }
1189 }
1190
1191 static inline void setup_spu_status_part2(struct spu_state *csa,
1192                                           struct spu *spu)
1193 {
1194         u32 mask;
1195
1196         /* Restore, Step 28:
1197          *     If the CSA.SPU_Status[I,S,H,P,R]=0 then
1198          *     add a 'br *' instruction to the end of
1199          *     the SPU based restore code.
1200          *
1201          *     NOTE: Rather than modifying the SPU executable, we
1202          *     instead add a new 'stopped_status' field to the
1203          *     LSCSA.  The SPU-side restore reads this field and
1204          *     takes the appropriate action when exiting.
1205          */
1206         mask = SPU_STATUS_INVALID_INSTR |
1207             SPU_STATUS_SINGLE_STEP |
1208             SPU_STATUS_STOPPED_BY_HALT |
1209             SPU_STATUS_STOPPED_BY_STOP | SPU_STATUS_RUNNING;
1210         if (!(csa->prob.spu_status_R & mask)) {
1211                 csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_R;
1212         }
1213 }
1214
1215 static inline void restore_mfc_rag(struct spu_state *csa, struct spu *spu)
1216 {
1217         /* Restore, Step 29:
1218          *     Restore RA_GROUP_ID register and the
1219          *     RA_ENABLE reigster from the CSA.
1220          */
1221         spu_resource_allocation_groupID_set(spu,
1222                         csa->priv1.resource_allocation_groupID_RW);
1223         spu_resource_allocation_enable_set(spu,
1224                         csa->priv1.resource_allocation_enable_RW);
1225 }
1226
1227 static inline void send_restore_code(struct spu_state *csa, struct spu *spu)
1228 {
1229         unsigned long addr = (unsigned long)&spu_restore_code[0];
1230         unsigned int ls_offset = 0x0;
1231         unsigned int size = sizeof(spu_restore_code);
1232         unsigned int tag = 0;
1233         unsigned int rclass = 0;
1234         unsigned int cmd = MFC_GETFS_CMD;
1235
1236         /* Restore, Step 37:
1237          *     Issue MFC DMA command to copy context
1238          *     restore code to local storage.
1239          */
1240         send_mfc_dma(spu, addr, ls_offset, size, tag, rclass, cmd);
1241 }
1242
1243 static inline void setup_decr(struct spu_state *csa, struct spu *spu)
1244 {
1245         /* Restore, Step 34:
1246          *     If CSA.MFC_CNTL[Ds]=1 (decrementer was
1247          *     running) then adjust decrementer, set
1248          *     decrementer running status in LSCSA,
1249          *     and set decrementer "wrapped" status
1250          *     in LSCSA.
1251          */
1252         if (csa->priv2.mfc_control_RW & MFC_CNTL_DECREMENTER_RUNNING) {
1253                 cycles_t resume_time = get_cycles();
1254                 cycles_t delta_time = resume_time - csa->suspend_time;
1255
1256                 csa->lscsa->decr_status.slot[0] = SPU_DECR_STATUS_RUNNING;
1257                 if (csa->lscsa->decr.slot[0] < delta_time) {
1258                         csa->lscsa->decr_status.slot[0] |=
1259                                  SPU_DECR_STATUS_WRAPPED;
1260                 }
1261
1262                 csa->lscsa->decr.slot[0] -= delta_time;
1263         } else {
1264                 csa->lscsa->decr_status.slot[0] = 0;
1265         }
1266 }
1267
1268 static inline void setup_ppu_mb(struct spu_state *csa, struct spu *spu)
1269 {
1270         /* Restore, Step 35:
1271          *     Copy the CSA.PU_MB data into the LSCSA.
1272          */
1273         csa->lscsa->ppu_mb.slot[0] = csa->prob.pu_mb_R;
1274 }
1275
1276 static inline void setup_ppuint_mb(struct spu_state *csa, struct spu *spu)
1277 {
1278         /* Restore, Step 36:
1279          *     Copy the CSA.PUINT_MB data into the LSCSA.
1280          */
1281         csa->lscsa->ppuint_mb.slot[0] = csa->priv2.puint_mb_R;
1282 }
1283
1284 static inline int check_restore_status(struct spu_state *csa, struct spu *spu)
1285 {
1286         struct spu_problem __iomem *prob = spu->problem;
1287         u32 complete;
1288
1289         /* Restore, Step 40:
1290          *     If SPU_Status[P]=1 and SPU_Status[SC] = "success",
1291          *     context restore succeeded, otherwise context restore
1292          *     failed.
1293          */
1294         complete = ((SPU_RESTORE_COMPLETE << SPU_STOP_STATUS_SHIFT) |
1295                     SPU_STATUS_STOPPED_BY_STOP);
1296         return (in_be32(&prob->spu_status_R) != complete) ? 1 : 0;
1297 }
1298
1299 static inline void restore_spu_privcntl(struct spu_state *csa, struct spu *spu)
1300 {
1301         struct spu_priv2 __iomem *priv2 = spu->priv2;
1302
1303         /* Restore, Step 41:
1304          *     Restore SPU_PrivCntl from the CSA.
1305          */
1306         out_be64(&priv2->spu_privcntl_RW, csa->priv2.spu_privcntl_RW);
1307         eieio();
1308 }
1309
1310 static inline void restore_status_part1(struct spu_state *csa, struct spu *spu)
1311 {
1312         struct spu_problem __iomem *prob = spu->problem;
1313         u32 mask;
1314
1315         /* Restore, Step 42:
1316          *     If any CSA.SPU_Status[I,S,H,P]=1, then
1317          *     restore the error or single step state.
1318          */
1319         mask = SPU_STATUS_INVALID_INSTR |
1320             SPU_STATUS_SINGLE_STEP |
1321             SPU_STATUS_STOPPED_BY_HALT | SPU_STATUS_STOPPED_BY_STOP;
1322         if (csa->prob.spu_status_R & mask) {
1323                 out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_RUNNABLE);
1324                 eieio();
1325                 POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
1326                                 SPU_STATUS_RUNNING);
1327         }
1328 }
1329
1330 static inline void restore_status_part2(struct spu_state *csa, struct spu *spu)
1331 {
1332         struct spu_problem __iomem *prob = spu->problem;
1333         u32 mask;
1334
1335         /* Restore, Step 43:
1336          *     If all CSA.SPU_Status[I,S,H,P,R]=0 then write
1337          *     SPU_RunCntl[R0R1]='01', wait for SPU_Status[R]=1,
1338          *     then write '00' to SPU_RunCntl[R0R1] and wait
1339          *     for SPU_Status[R]=0.
1340          */
1341         mask = SPU_STATUS_INVALID_INSTR |
1342             SPU_STATUS_SINGLE_STEP |
1343             SPU_STATUS_STOPPED_BY_HALT |
1344             SPU_STATUS_STOPPED_BY_STOP | SPU_STATUS_RUNNING;
1345         if (!(csa->prob.spu_status_R & mask)) {
1346                 out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_RUNNABLE);
1347                 eieio();
1348                 POLL_WHILE_FALSE(in_be32(&prob->spu_status_R) &
1349                                  SPU_STATUS_RUNNING);
1350                 out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_STOP);
1351                 eieio();
1352                 POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
1353                                 SPU_STATUS_RUNNING);
1354         }
1355 }
1356
1357 static inline void restore_ls_16kb(struct spu_state *csa, struct spu *spu)
1358 {
1359         unsigned long addr = (unsigned long)&csa->lscsa->ls[0];
1360         unsigned int ls_offset = 0x0;
1361         unsigned int size = 16384;
1362         unsigned int tag = 0;
1363         unsigned int rclass = 0;
1364         unsigned int cmd = MFC_GET_CMD;
1365
1366         /* Restore, Step 44:
1367          *     Issue a DMA command to restore the first
1368          *     16kb of local storage from CSA.
1369          */
1370         send_mfc_dma(spu, addr, ls_offset, size, tag, rclass, cmd);
1371 }
1372
1373 static inline void suspend_mfc(struct spu_state *csa, struct spu *spu)
1374 {
1375         struct spu_priv2 __iomem *priv2 = spu->priv2;
1376
1377         /* Restore, Step 47.
1378          *     Write MFC_Cntl[Sc,Sm]='1','0' to suspend
1379          *     the queue.
1380          */
1381         out_be64(&priv2->mfc_control_RW, MFC_CNTL_SUSPEND_DMA_QUEUE);
1382         eieio();
1383 }
1384
1385 static inline void clear_interrupts(struct spu_state *csa, struct spu *spu)
1386 {
1387         /* Restore, Step 49:
1388          *     Write INT_MASK_class0 with value of 0.
1389          *     Write INT_MASK_class1 with value of 0.
1390          *     Write INT_MASK_class2 with value of 0.
1391          *     Write INT_STAT_class0 with value of -1.
1392          *     Write INT_STAT_class1 with value of -1.
1393          *     Write INT_STAT_class2 with value of -1.
1394          */
1395         spin_lock_irq(&spu->register_lock);
1396         spu_int_mask_set(spu, 0, 0ul);
1397         spu_int_mask_set(spu, 1, 0ul);
1398         spu_int_mask_set(spu, 2, 0ul);
1399         spu_int_stat_clear(spu, 0, CLASS0_INTR_MASK);
1400         spu_int_stat_clear(spu, 1, CLASS1_INTR_MASK);
1401         spu_int_stat_clear(spu, 2, CLASS2_INTR_MASK);
1402         spin_unlock_irq(&spu->register_lock);
1403 }
1404
1405 static inline void restore_mfc_queues(struct spu_state *csa, struct spu *spu)
1406 {
1407         struct spu_priv2 __iomem *priv2 = spu->priv2;
1408         int i;
1409
1410         /* Restore, Step 50:
1411          *     If MFC_Cntl[Se]!=0 then restore
1412          *     MFC command queues.
1413          */
1414         if ((csa->priv2.mfc_control_RW & MFC_CNTL_DMA_QUEUES_EMPTY_MASK) == 0) {
1415                 for (i = 0; i < 8; i++) {
1416                         out_be64(&priv2->puq[i].mfc_cq_data0_RW,
1417                                  csa->priv2.puq[i].mfc_cq_data0_RW);
1418                         out_be64(&priv2->puq[i].mfc_cq_data1_RW,
1419                                  csa->priv2.puq[i].mfc_cq_data1_RW);
1420                         out_be64(&priv2->puq[i].mfc_cq_data2_RW,
1421                                  csa->priv2.puq[i].mfc_cq_data2_RW);
1422                         out_be64(&priv2->puq[i].mfc_cq_data3_RW,
1423                                  csa->priv2.puq[i].mfc_cq_data3_RW);
1424                 }
1425                 for (i = 0; i < 16; i++) {
1426                         out_be64(&priv2->spuq[i].mfc_cq_data0_RW,
1427                                  csa->priv2.spuq[i].mfc_cq_data0_RW);
1428                         out_be64(&priv2->spuq[i].mfc_cq_data1_RW,
1429                                  csa->priv2.spuq[i].mfc_cq_data1_RW);
1430                         out_be64(&priv2->spuq[i].mfc_cq_data2_RW,
1431                                  csa->priv2.spuq[i].mfc_cq_data2_RW);
1432                         out_be64(&priv2->spuq[i].mfc_cq_data3_RW,
1433                                  csa->priv2.spuq[i].mfc_cq_data3_RW);
1434                 }
1435         }
1436         eieio();
1437 }
1438
1439 static inline void restore_ppu_querymask(struct spu_state *csa, struct spu *spu)
1440 {
1441         struct spu_problem __iomem *prob = spu->problem;
1442
1443         /* Restore, Step 51:
1444          *     Restore the PPU_QueryMask register from CSA.
1445          */
1446         out_be32(&prob->dma_querymask_RW, csa->prob.dma_querymask_RW);
1447         eieio();
1448 }
1449
1450 static inline void restore_ppu_querytype(struct spu_state *csa, struct spu *spu)
1451 {
1452         struct spu_problem __iomem *prob = spu->problem;
1453
1454         /* Restore, Step 52:
1455          *     Restore the PPU_QueryType register from CSA.
1456          */
1457         out_be32(&prob->dma_querytype_RW, csa->prob.dma_querytype_RW);
1458         eieio();
1459 }
1460
1461 static inline void restore_mfc_csr_tsq(struct spu_state *csa, struct spu *spu)
1462 {
1463         struct spu_priv2 __iomem *priv2 = spu->priv2;
1464
1465         /* Restore, Step 53:
1466          *     Restore the MFC_CSR_TSQ register from CSA.
1467          */
1468         out_be64(&priv2->spu_tag_status_query_RW,
1469                  csa->priv2.spu_tag_status_query_RW);
1470         eieio();
1471 }
1472
1473 static inline void restore_mfc_csr_cmd(struct spu_state *csa, struct spu *spu)
1474 {
1475         struct spu_priv2 __iomem *priv2 = spu->priv2;
1476
1477         /* Restore, Step 54:
1478          *     Restore the MFC_CSR_CMD1 and MFC_CSR_CMD2
1479          *     registers from CSA.
1480          */
1481         out_be64(&priv2->spu_cmd_buf1_RW, csa->priv2.spu_cmd_buf1_RW);
1482         out_be64(&priv2->spu_cmd_buf2_RW, csa->priv2.spu_cmd_buf2_RW);
1483         eieio();
1484 }
1485
1486 static inline void restore_mfc_csr_ato(struct spu_state *csa, struct spu *spu)
1487 {
1488         struct spu_priv2 __iomem *priv2 = spu->priv2;
1489
1490         /* Restore, Step 55:
1491          *     Restore the MFC_CSR_ATO register from CSA.
1492          */
1493         out_be64(&priv2->spu_atomic_status_RW, csa->priv2.spu_atomic_status_RW);
1494 }
1495
1496 static inline void restore_mfc_tclass_id(struct spu_state *csa, struct spu *spu)
1497 {
1498         /* Restore, Step 56:
1499          *     Restore the MFC_TCLASS_ID register from CSA.
1500          */
1501         spu_mfc_tclass_id_set(spu, csa->priv1.mfc_tclass_id_RW);
1502         eieio();
1503 }
1504
1505 static inline void set_llr_event(struct spu_state *csa, struct spu *spu)
1506 {
1507         u64 ch0_cnt, ch0_data;
1508         u64 ch1_data;
1509
1510         /* Restore, Step 57:
1511          *    Set the Lock Line Reservation Lost Event by:
1512          *      1. OR CSA.SPU_Event_Status with bit 21 (Lr) set to 1.
1513          *      2. If CSA.SPU_Channel_0_Count=0 and
1514          *         CSA.SPU_Wr_Event_Mask[Lr]=1 and
1515          *         CSA.SPU_Event_Status[Lr]=0 then set
1516          *         CSA.SPU_Event_Status_Count=1.
1517          */
1518         ch0_cnt = csa->spu_chnlcnt_RW[0];
1519         ch0_data = csa->spu_chnldata_RW[0];
1520         ch1_data = csa->spu_chnldata_RW[1];
1521         csa->spu_chnldata_RW[0] |= MFC_LLR_LOST_EVENT;
1522         if ((ch0_cnt == 0) && !(ch0_data & MFC_LLR_LOST_EVENT) &&
1523             (ch1_data & MFC_LLR_LOST_EVENT)) {
1524                 csa->spu_chnlcnt_RW[0] = 1;
1525         }
1526 }
1527
1528 static inline void restore_decr_wrapped(struct spu_state *csa, struct spu *spu)
1529 {
1530         /* Restore, Step 58:
1531          *     If the status of the CSA software decrementer
1532          *     "wrapped" flag is set, OR in a '1' to
1533          *     CSA.SPU_Event_Status[Tm].
1534          */
1535         if (!(csa->lscsa->decr_status.slot[0] & SPU_DECR_STATUS_WRAPPED))
1536                 return;
1537
1538         if ((csa->spu_chnlcnt_RW[0] == 0) &&
1539             (csa->spu_chnldata_RW[1] & 0x20) &&
1540             !(csa->spu_chnldata_RW[0] & 0x20))
1541                 csa->spu_chnlcnt_RW[0] = 1;
1542
1543         csa->spu_chnldata_RW[0] |= 0x20;
1544 }
1545
1546 static inline void restore_ch_part1(struct spu_state *csa, struct spu *spu)
1547 {
1548         struct spu_priv2 __iomem *priv2 = spu->priv2;
1549         u64 idx, ch_indices[] = { 0UL, 3UL, 4UL, 24UL, 25UL, 27UL };
1550         int i;
1551
1552         /* Restore, Step 59:
1553          *      Restore the following CH: [0,3,4,24,25,27]
1554          */
1555         for (i = 0; i < ARRAY_SIZE(ch_indices); i++) {
1556                 idx = ch_indices[i];
1557                 out_be64(&priv2->spu_chnlcntptr_RW, idx);
1558                 eieio();
1559                 out_be64(&priv2->spu_chnldata_RW, csa->spu_chnldata_RW[idx]);
1560                 out_be64(&priv2->spu_chnlcnt_RW, csa->spu_chnlcnt_RW[idx]);
1561                 eieio();
1562         }
1563 }
1564
1565 static inline void restore_ch_part2(struct spu_state *csa, struct spu *spu)
1566 {
1567         struct spu_priv2 __iomem *priv2 = spu->priv2;
1568         u64 ch_indices[3] = { 9UL, 21UL, 23UL };
1569         u64 ch_counts[3] = { 1UL, 16UL, 1UL };
1570         u64 idx;
1571         int i;
1572
1573         /* Restore, Step 60:
1574          *     Restore the following CH: [9,21,23].
1575          */
1576         ch_counts[0] = 1UL;
1577         ch_counts[1] = csa->spu_chnlcnt_RW[21];
1578         ch_counts[2] = 1UL;
1579         for (i = 0; i < 3; i++) {
1580                 idx = ch_indices[i];
1581                 out_be64(&priv2->spu_chnlcntptr_RW, idx);
1582                 eieio();
1583                 out_be64(&priv2->spu_chnlcnt_RW, ch_counts[i]);
1584                 eieio();
1585         }
1586 }
1587
1588 static inline void restore_spu_lslr(struct spu_state *csa, struct spu *spu)
1589 {
1590         struct spu_priv2 __iomem *priv2 = spu->priv2;
1591
1592         /* Restore, Step 61:
1593          *     Restore the SPU_LSLR register from CSA.
1594          */
1595         out_be64(&priv2->spu_lslr_RW, csa->priv2.spu_lslr_RW);
1596         eieio();
1597 }
1598
1599 static inline void restore_spu_cfg(struct spu_state *csa, struct spu *spu)
1600 {
1601         struct spu_priv2 __iomem *priv2 = spu->priv2;
1602
1603         /* Restore, Step 62:
1604          *     Restore the SPU_Cfg register from CSA.
1605          */
1606         out_be64(&priv2->spu_cfg_RW, csa->priv2.spu_cfg_RW);
1607         eieio();
1608 }
1609
1610 static inline void restore_pm_trace(struct spu_state *csa, struct spu *spu)
1611 {
1612         /* Restore, Step 63:
1613          *     Restore PM_Trace_Tag_Wait_Mask from CSA.
1614          *     Not performed by this implementation.
1615          */
1616 }
1617
1618 static inline void restore_spu_npc(struct spu_state *csa, struct spu *spu)
1619 {
1620         struct spu_problem __iomem *prob = spu->problem;
1621
1622         /* Restore, Step 64:
1623          *     Restore SPU_NPC from CSA.
1624          */
1625         out_be32(&prob->spu_npc_RW, csa->prob.spu_npc_RW);
1626         eieio();
1627 }
1628
1629 static inline void restore_spu_mb(struct spu_state *csa, struct spu *spu)
1630 {
1631         struct spu_priv2 __iomem *priv2 = spu->priv2;
1632         int i;
1633
1634         /* Restore, Step 65:
1635          *     Restore MFC_RdSPU_MB from CSA.
1636          */
1637         out_be64(&priv2->spu_chnlcntptr_RW, 29UL);
1638         eieio();
1639         out_be64(&priv2->spu_chnlcnt_RW, csa->spu_chnlcnt_RW[29]);
1640         for (i = 0; i < 4; i++) {
1641                 out_be64(&priv2->spu_chnldata_RW, csa->spu_mailbox_data[i]);
1642         }
1643         eieio();
1644 }
1645
1646 static inline void check_ppu_mb_stat(struct spu_state *csa, struct spu *spu)
1647 {
1648         struct spu_problem __iomem *prob = spu->problem;
1649         u32 dummy = 0;
1650
1651         /* Restore, Step 66:
1652          *     If CSA.MB_Stat[P]=0 (mailbox empty) then
1653          *     read from the PPU_MB register.
1654          */
1655         if ((csa->prob.mb_stat_R & 0xFF) == 0) {
1656                 dummy = in_be32(&prob->pu_mb_R);
1657                 eieio();
1658         }
1659 }
1660
1661 static inline void check_ppuint_mb_stat(struct spu_state *csa, struct spu *spu)
1662 {
1663         struct spu_priv2 __iomem *priv2 = spu->priv2;
1664         u64 dummy = 0UL;
1665
1666         /* Restore, Step 66:
1667          *     If CSA.MB_Stat[I]=0 (mailbox empty) then
1668          *     read from the PPUINT_MB register.
1669          */
1670         if ((csa->prob.mb_stat_R & 0xFF0000) == 0) {
1671                 dummy = in_be64(&priv2->puint_mb_R);
1672                 eieio();
1673                 spu_int_stat_clear(spu, 2, CLASS2_ENABLE_MAILBOX_INTR);
1674                 eieio();
1675         }
1676 }
1677
1678 static inline void restore_mfc_sr1(struct spu_state *csa, struct spu *spu)
1679 {
1680         /* Restore, Step 69:
1681          *     Restore the MFC_SR1 register from CSA.
1682          */
1683         spu_mfc_sr1_set(spu, csa->priv1.mfc_sr1_RW);
1684         eieio();
1685 }
1686
1687 static inline void restore_other_spu_access(struct spu_state *csa,
1688                                             struct spu *spu)
1689 {
1690         /* Restore, Step 70:
1691          *     Restore other SPU mappings to this SPU. TBD.
1692          */
1693 }
1694
1695 static inline void restore_spu_runcntl(struct spu_state *csa, struct spu *spu)
1696 {
1697         struct spu_problem __iomem *prob = spu->problem;
1698
1699         /* Restore, Step 71:
1700          *     If CSA.SPU_Status[R]=1 then write
1701          *     SPU_RunCntl[R0R1]='01'.
1702          */
1703         if (csa->prob.spu_status_R & SPU_STATUS_RUNNING) {
1704                 out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_RUNNABLE);
1705                 eieio();
1706         }
1707 }
1708
1709 static inline void restore_mfc_cntl(struct spu_state *csa, struct spu *spu)
1710 {
1711         struct spu_priv2 __iomem *priv2 = spu->priv2;
1712
1713         /* Restore, Step 72:
1714          *    Restore the MFC_CNTL register for the CSA.
1715          */
1716         out_be64(&priv2->mfc_control_RW, csa->priv2.mfc_control_RW);
1717         eieio();
1718         /*
1719          * FIXME: this is to restart a DMA that we were processing
1720          *        before the save. better remember the fault information
1721          *        in the csa instead.
1722          */
1723         if ((csa->priv2.mfc_control_RW & MFC_CNTL_SUSPEND_DMA_QUEUE_MASK)) {
1724                 out_be64(&priv2->mfc_control_RW, MFC_CNTL_RESTART_DMA_COMMAND);
1725                 eieio();
1726         }
1727 }
1728
1729 static inline void enable_user_access(struct spu_state *csa, struct spu *spu)
1730 {
1731         /* Restore, Step 73:
1732          *     Enable user-space access (if provided) to this
1733          *     SPU by mapping the virtual pages assigned to
1734          *     the SPU memory-mapped I/O (MMIO) for problem
1735          *     state. TBD.
1736          */
1737 }
1738
1739 static inline void reset_switch_active(struct spu_state *csa, struct spu *spu)
1740 {
1741         /* Restore, Step 74:
1742          *     Reset the "context switch active" flag.
1743          *     Not performed by this implementation.
1744          */
1745 }
1746
1747 static inline void reenable_interrupts(struct spu_state *csa, struct spu *spu)
1748 {
1749         /* Restore, Step 75:
1750          *     Re-enable SPU interrupts.
1751          */
1752         spin_lock_irq(&spu->register_lock);
1753         spu_int_mask_set(spu, 0, csa->priv1.int_mask_class0_RW);
1754         spu_int_mask_set(spu, 1, csa->priv1.int_mask_class1_RW);
1755         spu_int_mask_set(spu, 2, csa->priv1.int_mask_class2_RW);
1756         spin_unlock_irq(&spu->register_lock);
1757 }
1758
1759 static int quiece_spu(struct spu_state *prev, struct spu *spu)
1760 {
1761         /*
1762          * Combined steps 2-18 of SPU context save sequence, which
1763          * quiesce the SPU state (disable SPU execution, MFC command
1764          * queues, decrementer, SPU interrupts, etc.).
1765          *
1766          * Returns      0 on success.
1767          *              2 if failed step 2.
1768          *              6 if failed step 6.
1769          */
1770
1771         if (check_spu_isolate(prev, spu)) {     /* Step 2. */
1772                 return 2;
1773         }
1774         disable_interrupts(prev, spu);          /* Step 3. */
1775         set_watchdog_timer(prev, spu);          /* Step 4. */
1776         inhibit_user_access(prev, spu);         /* Step 5. */
1777         if (check_spu_isolate(prev, spu)) {     /* Step 6. */
1778                 return 6;
1779         }
1780         set_switch_pending(prev, spu);          /* Step 7. */
1781         save_mfc_cntl(prev, spu);               /* Step 8. */
1782         save_spu_runcntl(prev, spu);            /* Step 9. */
1783         save_mfc_sr1(prev, spu);                /* Step 10. */
1784         save_spu_status(prev, spu);             /* Step 11. */
1785         save_mfc_decr(prev, spu);               /* Step 12. */
1786         halt_mfc_decr(prev, spu);               /* Step 13. */
1787         save_timebase(prev, spu);               /* Step 14. */
1788         remove_other_spu_access(prev, spu);     /* Step 15. */
1789         do_mfc_mssync(prev, spu);               /* Step 16. */
1790         issue_mfc_tlbie(prev, spu);             /* Step 17. */
1791         handle_pending_interrupts(prev, spu);   /* Step 18. */
1792
1793         return 0;
1794 }
1795
1796 static void save_csa(struct spu_state *prev, struct spu *spu)
1797 {
1798         /*
1799          * Combine steps 19-44 of SPU context save sequence, which
1800          * save regions of the privileged & problem state areas.
1801          */
1802
1803         save_mfc_queues(prev, spu);     /* Step 19. */
1804         save_ppu_querymask(prev, spu);  /* Step 20. */
1805         save_ppu_querytype(prev, spu);  /* Step 21. */
1806         save_ppu_tagstatus(prev, spu);  /* NEW.     */
1807         save_mfc_csr_tsq(prev, spu);    /* Step 22. */
1808         save_mfc_csr_cmd(prev, spu);    /* Step 23. */
1809         save_mfc_csr_ato(prev, spu);    /* Step 24. */
1810         save_mfc_tclass_id(prev, spu);  /* Step 25. */
1811         set_mfc_tclass_id(prev, spu);   /* Step 26. */
1812         purge_mfc_queue(prev, spu);     /* Step 27. */
1813         wait_purge_complete(prev, spu); /* Step 28. */
1814         setup_mfc_sr1(prev, spu);       /* Step 30. */
1815         save_spu_npc(prev, spu);        /* Step 31. */
1816         save_spu_privcntl(prev, spu);   /* Step 32. */
1817         reset_spu_privcntl(prev, spu);  /* Step 33. */
1818         save_spu_lslr(prev, spu);       /* Step 34. */
1819         reset_spu_lslr(prev, spu);      /* Step 35. */
1820         save_spu_cfg(prev, spu);        /* Step 36. */
1821         save_pm_trace(prev, spu);       /* Step 37. */
1822         save_mfc_rag(prev, spu);        /* Step 38. */
1823         save_ppu_mb_stat(prev, spu);    /* Step 39. */
1824         save_ppu_mb(prev, spu);         /* Step 40. */
1825         save_ppuint_mb(prev, spu);      /* Step 41. */
1826         save_ch_part1(prev, spu);       /* Step 42. */
1827         save_spu_mb(prev, spu);         /* Step 43. */
1828         save_mfc_cmd(prev, spu);        /* Step 44. */
1829         reset_ch(prev, spu);            /* Step 45. */
1830 }
1831
1832 static void save_lscsa(struct spu_state *prev, struct spu *spu)
1833 {
1834         /*
1835          * Perform steps 46-57 of SPU context save sequence,
1836          * which save regions of the local store and register
1837          * file.
1838          */
1839
1840         resume_mfc_queue(prev, spu);    /* Step 46. */
1841         /* Step 47. */
1842         setup_mfc_slbs(prev, spu, spu_save_code, sizeof(spu_save_code));
1843         set_switch_active(prev, spu);   /* Step 48. */
1844         enable_interrupts(prev, spu);   /* Step 49. */
1845         save_ls_16kb(prev, spu);        /* Step 50. */
1846         set_spu_npc(prev, spu);         /* Step 51. */
1847         set_signot1(prev, spu);         /* Step 52. */
1848         set_signot2(prev, spu);         /* Step 53. */
1849         send_save_code(prev, spu);      /* Step 54. */
1850         set_ppu_querymask(prev, spu);   /* Step 55. */
1851         wait_tag_complete(prev, spu);   /* Step 56. */
1852         wait_spu_stopped(prev, spu);    /* Step 57. */
1853 }
1854
1855 static void force_spu_isolate_exit(struct spu *spu)
1856 {
1857         struct spu_problem __iomem *prob = spu->problem;
1858         struct spu_priv2 __iomem *priv2 = spu->priv2;
1859
1860         /* Stop SPE execution and wait for completion. */
1861         out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_STOP);
1862         iobarrier_rw();
1863         POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) & SPU_STATUS_RUNNING);
1864
1865         /* Restart SPE master runcntl. */
1866         spu_mfc_sr1_set(spu, MFC_STATE1_MASTER_RUN_CONTROL_MASK);
1867         iobarrier_w();
1868
1869         /* Initiate isolate exit request and wait for completion. */
1870         out_be64(&priv2->spu_privcntl_RW, 4LL);
1871         iobarrier_w();
1872         out_be32(&prob->spu_runcntl_RW, 2);
1873         iobarrier_rw();
1874         POLL_WHILE_FALSE((in_be32(&prob->spu_status_R)
1875                                 & SPU_STATUS_STOPPED_BY_STOP));
1876
1877         /* Reset load request to normal. */
1878         out_be64(&priv2->spu_privcntl_RW, SPU_PRIVCNT_LOAD_REQUEST_NORMAL);
1879         iobarrier_w();
1880 }
1881
1882 /**
1883  * stop_spu_isolate
1884  *      Check SPU run-control state and force isolated
1885  *      exit function as necessary.
1886  */
1887 static void stop_spu_isolate(struct spu *spu)
1888 {
1889         struct spu_problem __iomem *prob = spu->problem;
1890
1891         if (in_be32(&prob->spu_status_R) & SPU_STATUS_ISOLATED_STATE) {
1892                 /* The SPU is in isolated state; the only way
1893                  * to get it out is to perform an isolated
1894                  * exit (clean) operation.
1895                  */
1896                 force_spu_isolate_exit(spu);
1897         }
1898 }
1899
1900 static void harvest(struct spu_state *prev, struct spu *spu)
1901 {
1902         /*
1903          * Perform steps 2-25 of SPU context restore sequence,
1904          * which resets an SPU either after a failed save, or
1905          * when using SPU for first time.
1906          */
1907
1908         disable_interrupts(prev, spu);          /* Step 2.  */
1909         inhibit_user_access(prev, spu);         /* Step 3.  */
1910         terminate_spu_app(prev, spu);           /* Step 4.  */
1911         set_switch_pending(prev, spu);          /* Step 5.  */
1912         stop_spu_isolate(spu);                  /* NEW.     */
1913         remove_other_spu_access(prev, spu);     /* Step 6.  */
1914         suspend_mfc_and_halt_decr(prev, spu);   /* Step 7.  */
1915         wait_suspend_mfc_complete(prev, spu);   /* Step 8.  */
1916         if (!suspend_spe(prev, spu))            /* Step 9.  */
1917                 clear_spu_status(prev, spu);    /* Step 10. */
1918         do_mfc_mssync(prev, spu);               /* Step 11. */
1919         issue_mfc_tlbie(prev, spu);             /* Step 12. */
1920         handle_pending_interrupts(prev, spu);   /* Step 13. */
1921         purge_mfc_queue(prev, spu);             /* Step 14. */
1922         wait_purge_complete(prev, spu);         /* Step 15. */
1923         reset_spu_privcntl(prev, spu);          /* Step 16. */
1924         reset_spu_lslr(prev, spu);              /* Step 17. */
1925         setup_mfc_sr1(prev, spu);               /* Step 18. */
1926         spu_invalidate_slbs(spu);               /* Step 19. */
1927         reset_ch_part1(prev, spu);              /* Step 20. */
1928         reset_ch_part2(prev, spu);              /* Step 21. */
1929         enable_interrupts(prev, spu);           /* Step 22. */
1930         set_switch_active(prev, spu);           /* Step 23. */
1931         set_mfc_tclass_id(prev, spu);           /* Step 24. */
1932         resume_mfc_queue(prev, spu);            /* Step 25. */
1933 }
1934
1935 static void restore_lscsa(struct spu_state *next, struct spu *spu)
1936 {
1937         /*
1938          * Perform steps 26-40 of SPU context restore sequence,
1939          * which restores regions of the local store and register
1940          * file.
1941          */
1942
1943         set_watchdog_timer(next, spu);          /* Step 26. */
1944         setup_spu_status_part1(next, spu);      /* Step 27. */
1945         setup_spu_status_part2(next, spu);      /* Step 28. */
1946         restore_mfc_rag(next, spu);             /* Step 29. */
1947         /* Step 30. */
1948         setup_mfc_slbs(next, spu, spu_restore_code, sizeof(spu_restore_code));
1949         set_spu_npc(next, spu);                 /* Step 31. */
1950         set_signot1(next, spu);                 /* Step 32. */
1951         set_signot2(next, spu);                 /* Step 33. */
1952         setup_decr(next, spu);                  /* Step 34. */
1953         setup_ppu_mb(next, spu);                /* Step 35. */
1954         setup_ppuint_mb(next, spu);             /* Step 36. */
1955         send_restore_code(next, spu);           /* Step 37. */
1956         set_ppu_querymask(next, spu);           /* Step 38. */
1957         wait_tag_complete(next, spu);           /* Step 39. */
1958         wait_spu_stopped(next, spu);            /* Step 40. */
1959 }
1960
1961 static void restore_csa(struct spu_state *next, struct spu *spu)
1962 {
1963         /*
1964          * Combine steps 41-76 of SPU context restore sequence, which
1965          * restore regions of the privileged & problem state areas.
1966          */
1967
1968         restore_spu_privcntl(next, spu);        /* Step 41. */
1969         restore_status_part1(next, spu);        /* Step 42. */
1970         restore_status_part2(next, spu);        /* Step 43. */
1971         restore_ls_16kb(next, spu);             /* Step 44. */
1972         wait_tag_complete(next, spu);           /* Step 45. */
1973         suspend_mfc(next, spu);                 /* Step 46. */
1974         wait_suspend_mfc_complete(next, spu);   /* Step 47. */
1975         issue_mfc_tlbie(next, spu);             /* Step 48. */
1976         clear_interrupts(next, spu);            /* Step 49. */
1977         restore_mfc_queues(next, spu);          /* Step 50. */
1978         restore_ppu_querymask(next, spu);       /* Step 51. */
1979         restore_ppu_querytype(next, spu);       /* Step 52. */
1980         restore_mfc_csr_tsq(next, spu);         /* Step 53. */
1981         restore_mfc_csr_cmd(next, spu);         /* Step 54. */
1982         restore_mfc_csr_ato(next, spu);         /* Step 55. */
1983         restore_mfc_tclass_id(next, spu);       /* Step 56. */
1984         set_llr_event(next, spu);               /* Step 57. */
1985         restore_decr_wrapped(next, spu);        /* Step 58. */
1986         restore_ch_part1(next, spu);            /* Step 59. */
1987         restore_ch_part2(next, spu);            /* Step 60. */
1988         restore_spu_lslr(next, spu);            /* Step 61. */
1989         restore_spu_cfg(next, spu);             /* Step 62. */
1990         restore_pm_trace(next, spu);            /* Step 63. */
1991         restore_spu_npc(next, spu);             /* Step 64. */
1992         restore_spu_mb(next, spu);              /* Step 65. */
1993         check_ppu_mb_stat(next, spu);           /* Step 66. */
1994         check_ppuint_mb_stat(next, spu);        /* Step 67. */
1995         spu_invalidate_slbs(spu);               /* Modified Step 68. */
1996         restore_mfc_sr1(next, spu);             /* Step 69. */
1997         restore_other_spu_access(next, spu);    /* Step 70. */
1998         restore_spu_runcntl(next, spu);         /* Step 71. */
1999         restore_mfc_cntl(next, spu);            /* Step 72. */
2000         enable_user_access(next, spu);          /* Step 73. */
2001         reset_switch_active(next, spu);         /* Step 74. */
2002         reenable_interrupts(next, spu);         /* Step 75. */
2003 }
2004
2005 static int __do_spu_save(struct spu_state *prev, struct spu *spu)
2006 {
2007         int rc;
2008
2009         /*
2010          * SPU context save can be broken into three phases:
2011          *
2012          *     (a) quiesce [steps 2-16].
2013          *     (b) save of CSA, performed by PPE [steps 17-42]
2014          *     (c) save of LSCSA, mostly performed by SPU [steps 43-52].
2015          *
2016          * Returns      0 on success.
2017          *              2,6 if failed to quiece SPU
2018          *              53 if SPU-side of save failed.
2019          */
2020
2021         rc = quiece_spu(prev, spu);             /* Steps 2-16. */
2022         switch (rc) {
2023         default:
2024         case 2:
2025         case 6:
2026                 harvest(prev, spu);
2027                 return rc;
2028                 break;
2029         case 0:
2030                 break;
2031         }
2032         save_csa(prev, spu);                    /* Steps 17-43. */
2033         save_lscsa(prev, spu);                  /* Steps 44-53. */
2034         return check_save_status(prev, spu);    /* Step 54.     */
2035 }
2036
2037 static int __do_spu_restore(struct spu_state *next, struct spu *spu)
2038 {
2039         int rc;
2040
2041         /*
2042          * SPU context restore can be broken into three phases:
2043          *
2044          *    (a) harvest (or reset) SPU [steps 2-24].
2045          *    (b) restore LSCSA [steps 25-40], mostly performed by SPU.
2046          *    (c) restore CSA [steps 41-76], performed by PPE.
2047          *
2048          * The 'harvest' step is not performed here, but rather
2049          * as needed below.
2050          */
2051
2052         restore_lscsa(next, spu);               /* Steps 24-39. */
2053         rc = check_restore_status(next, spu);   /* Step 40.     */
2054         switch (rc) {
2055         default:
2056                 /* Failed. Return now. */
2057                 return rc;
2058                 break;
2059         case 0:
2060                 /* Fall through to next step. */
2061                 break;
2062         }
2063         restore_csa(next, spu);
2064
2065         return 0;
2066 }
2067
2068 /**
2069  * spu_save - SPU context save, with locking.
2070  * @prev: pointer to SPU context save area, to be saved.
2071  * @spu: pointer to SPU iomem structure.
2072  *
2073  * Acquire locks, perform the save operation then return.
2074  */
2075 int spu_save(struct spu_state *prev, struct spu *spu)
2076 {
2077         int rc;
2078
2079         acquire_spu_lock(spu);          /* Step 1.     */
2080         rc = __do_spu_save(prev, spu);  /* Steps 2-53. */
2081         release_spu_lock(spu);
2082         if (rc != 0 && rc != 2 && rc != 6) {
2083                 panic("%s failed on SPU[%d], rc=%d.\n",
2084                       __func__, spu->number, rc);
2085         }
2086         return 0;
2087 }
2088 EXPORT_SYMBOL_GPL(spu_save);
2089
2090 /**
2091  * spu_restore - SPU context restore, with harvest and locking.
2092  * @new: pointer to SPU context save area, to be restored.
2093  * @spu: pointer to SPU iomem structure.
2094  *
2095  * Perform harvest + restore, as we may not be coming
2096  * from a previous successful save operation, and the
2097  * hardware state is unknown.
2098  */
2099 int spu_restore(struct spu_state *new, struct spu *spu)
2100 {
2101         int rc;
2102
2103         acquire_spu_lock(spu);
2104         harvest(NULL, spu);
2105         spu->slb_replace = 0;
2106         rc = __do_spu_restore(new, spu);
2107         release_spu_lock(spu);
2108         if (rc) {
2109                 panic("%s failed on SPU[%d] rc=%d.\n",
2110                        __func__, spu->number, rc);
2111         }
2112         return rc;
2113 }
2114 EXPORT_SYMBOL_GPL(spu_restore);
2115
2116 static void init_prob(struct spu_state *csa)
2117 {
2118         csa->spu_chnlcnt_RW[9] = 1;
2119         csa->spu_chnlcnt_RW[21] = 16;
2120         csa->spu_chnlcnt_RW[23] = 1;
2121         csa->spu_chnlcnt_RW[28] = 1;
2122         csa->spu_chnlcnt_RW[30] = 1;
2123         csa->prob.spu_runcntl_RW = SPU_RUNCNTL_STOP;
2124         csa->prob.mb_stat_R = 0x000400;
2125 }
2126
2127 static void init_priv1(struct spu_state *csa)
2128 {
2129         /* Enable decode, relocate, tlbie response, master runcntl. */
2130         csa->priv1.mfc_sr1_RW = MFC_STATE1_LOCAL_STORAGE_DECODE_MASK |
2131             MFC_STATE1_MASTER_RUN_CONTROL_MASK |
2132             MFC_STATE1_PROBLEM_STATE_MASK |
2133             MFC_STATE1_RELOCATE_MASK | MFC_STATE1_BUS_TLBIE_MASK;
2134
2135         /* Enable OS-specific set of interrupts. */
2136         csa->priv1.int_mask_class0_RW = CLASS0_ENABLE_DMA_ALIGNMENT_INTR |
2137             CLASS0_ENABLE_INVALID_DMA_COMMAND_INTR |
2138             CLASS0_ENABLE_SPU_ERROR_INTR;
2139         csa->priv1.int_mask_class1_RW = CLASS1_ENABLE_SEGMENT_FAULT_INTR |
2140             CLASS1_ENABLE_STORAGE_FAULT_INTR;
2141         csa->priv1.int_mask_class2_RW = CLASS2_ENABLE_SPU_STOP_INTR |
2142             CLASS2_ENABLE_SPU_HALT_INTR |
2143             CLASS2_ENABLE_SPU_DMA_TAG_GROUP_COMPLETE_INTR;
2144 }
2145
2146 static void init_priv2(struct spu_state *csa)
2147 {
2148         csa->priv2.spu_lslr_RW = LS_ADDR_MASK;
2149         csa->priv2.mfc_control_RW = MFC_CNTL_RESUME_DMA_QUEUE |
2150             MFC_CNTL_NORMAL_DMA_QUEUE_OPERATION |
2151             MFC_CNTL_DMA_QUEUES_EMPTY_MASK;
2152 }
2153
2154 /**
2155  * spu_alloc_csa - allocate and initialize an SPU context save area.
2156  *
2157  * Allocate and initialize the contents of an SPU context save area.
2158  * This includes enabling address translation, interrupt masks, etc.,
2159  * as appropriate for the given OS environment.
2160  *
2161  * Note that storage for the 'lscsa' is allocated separately,
2162  * as it is by far the largest of the context save regions,
2163  * and may need to be pinned or otherwise specially aligned.
2164  */
2165 int spu_init_csa(struct spu_state *csa)
2166 {
2167         int rc;
2168
2169         if (!csa)
2170                 return -EINVAL;
2171         memset(csa, 0, sizeof(struct spu_state));
2172
2173         rc = spu_alloc_lscsa(csa);
2174         if (rc)
2175                 return rc;
2176
2177         spin_lock_init(&csa->register_lock);
2178
2179         init_prob(csa);
2180         init_priv1(csa);
2181         init_priv2(csa);
2182
2183         return 0;
2184 }
2185
2186 void spu_fini_csa(struct spu_state *csa)
2187 {
2188         spu_free_lscsa(csa);
2189 }