git.oblomov.eu Git - linux-2.6/blob - drivers/ieee1394/pcilynx.c

   1 /*
   2  * pcilynx.c - Texas Instruments PCILynx driver
   3  * Copyright (C) 1999,2000 Andreas Bombe <andreas.bombe@munich.netsurf.de>,
   4  *                         Stephan Linz <linz@mazet.de>
   5  *                         Manfred Weihs <weihs@ict.tuwien.ac.at>
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License as published by
   9  * the Free Software Foundation; either version 2 of the License, or
  10  * (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software Foundation,
  19  * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  20  */
  21
  22 /*
  23  * Contributions:
  24  *
  25  * Manfred Weihs <weihs@ict.tuwien.ac.at>
  26  *        reading bus info block (containing GUID) from serial
  27  *            eeprom via i2c and storing it in config ROM
  28  *        Reworked code for initiating bus resets
  29  *            (long, short, with or without hold-off)
  30  *        Enhancements in async and iso send code
  31  */
  32
  33 #include <linux/kernel.h>
  34 #include <linux/slab.h>
  35 #include <linux/interrupt.h>
  36 #include <linux/wait.h>
  37 #include <linux/errno.h>
  38 #include <linux/module.h>
  39 #include <linux/moduleparam.h>
  40 #include <linux/init.h>
  41 #include <linux/pci.h>
  42 #include <linux/fs.h>
  43 #include <linux/poll.h>
  44 #include <linux/kdev_t.h>
  45 #include <linux/dma-mapping.h>
  46 #include <asm/byteorder.h>
  47 #include <asm/atomic.h>
  48 #include <asm/io.h>
  49 #include <asm/uaccess.h>
  50 #include <asm/irq.h>
  51
  52 #include "csr1212.h"
  53 #include "ieee1394.h"
  54 #include "ieee1394_types.h"
  55 #include "hosts.h"
  56 #include "ieee1394_core.h"
  57 #include "highlevel.h"
  58 #include "pcilynx.h"
  59
  60 #include <linux/i2c.h>
  61 #include <linux/i2c-algo-bit.h>
  62
  63 /* print general (card independent) information */
  64 #define PRINT_G(level, fmt, args...) printk(level "pcilynx: " fmt "\n" , ## args)
  65 /* print card specific information */
  66 #define PRINT(level, card, fmt, args...) printk(level "pcilynx%d: " fmt "\n" , card , ## args)
  67
  68 #ifdef CONFIG_IEEE1394_VERBOSEDEBUG
  69 #define PRINT_GD(level, fmt, args...) printk(level "pcilynx: " fmt "\n" , ## args)
  70 #define PRINTD(level, card, fmt, args...) printk(level "pcilynx%d: " fmt "\n" , card , ## args)
  71 #else
  72 #define PRINT_GD(level, fmt, args...) do {} while (0)
  73 #define PRINTD(level, card, fmt, args...) do {} while (0)
  74 #endif
  75
  76
  77 /* Module Parameters */
  78 static int skip_eeprom;
  79 module_param(skip_eeprom, int, 0444);
  80 MODULE_PARM_DESC(skip_eeprom, "Use generic bus info block instead of serial eeprom (default = 0).");
  81
  82
  83 static struct hpsb_host_driver lynx_driver;
  84 static unsigned int card_id;
  85
  86
  87
  88 /*
  89  * I2C stuff
  90  */
  91
  92 /* the i2c stuff was inspired by i2c-philips-par.c */
  93
  94 static void bit_setscl(void *data, int state)
  95 {
  96         if (state) {
  97                   ((struct ti_lynx *) data)->i2c_driven_state |= 0x00000040;
  98         } else {
  99                   ((struct ti_lynx *) data)->i2c_driven_state &= ~0x00000040;
 100         }
 101         reg_write((struct ti_lynx *) data, SERIAL_EEPROM_CONTROL, ((struct ti_lynx *) data)->i2c_driven_state);
 102 }
 103
 104 static void bit_setsda(void *data, int state)
 105 {
 106         if (state) {
 107                   ((struct ti_lynx *) data)->i2c_driven_state |= 0x00000010;
 108         } else {
 109                   ((struct ti_lynx *) data)->i2c_driven_state &= ~0x00000010;
 110         }
 111         reg_write((struct ti_lynx *) data, SERIAL_EEPROM_CONTROL, ((struct ti_lynx *) data)->i2c_driven_state);
 112 }
 113
 114 static int bit_getscl(void *data)
 115 {
 116         return reg_read((struct ti_lynx *) data, SERIAL_EEPROM_CONTROL) & 0x00000040;
 117 }
 118
 119 static int bit_getsda(void *data)
 120 {
 121         return reg_read((struct ti_lynx *) data, SERIAL_EEPROM_CONTROL) & 0x00000010;
 122 }
 123
 124 static int bit_reg(struct i2c_client *client)
 125 {
 126         return 0;
 127 }
 128
 129 static int bit_unreg(struct i2c_client *client)
 130 {
 131         return 0;
 132 }
 133
 134 static struct i2c_algo_bit_data bit_data = {
 135         .setsda                 = bit_setsda,
 136         .setscl                 = bit_setscl,
 137         .getsda                 = bit_getsda,
 138         .getscl                 = bit_getscl,
 139         .udelay                 = 5,
 140         .timeout                = 100,
 141 };
 142
 143 static struct i2c_adapter bit_ops = {
 144         .id                     = 0xAA, //FIXME: probably we should get an id in i2c-id.h
 145         .client_register        = bit_reg,
 146         .client_unregister      = bit_unreg,
 147         .name                   = "PCILynx I2C",
 148 };
 149
 150
 151
 152 /*
 153  * PCL handling functions.
 154  */
 155
 156 static pcl_t alloc_pcl(struct ti_lynx *lynx)
 157 {
 158         u8 m;
 159         int i, j;
 160
 161         spin_lock(&lynx->lock);
 162         /* FIXME - use ffz() to make this readable */
 163         for (i = 0; i < (LOCALRAM_SIZE / 1024); i++) {
 164                 m = lynx->pcl_bmap[i];
 165                 for (j = 0; j < 8; j++) {
 166                         if (m & 1<<j) {
 167                                 continue;
 168                         }
 169                         m |= 1<<j;
 170                         lynx->pcl_bmap[i] = m;
 171                         spin_unlock(&lynx->lock);
 172                         return 8 * i + j;
 173                 }
 174         }
 175         spin_unlock(&lynx->lock);
 176
 177         return -1;
 178 }
 179
 180
 181 #if 0
 182 static void free_pcl(struct ti_lynx *lynx, pcl_t pclid)
 183 {
 184         int off, bit;
 185
 186         off = pclid / 8;
 187         bit = pclid % 8;
 188
 189         if (pclid < 0) {
 190                 return;
 191         }
 192
 193         spin_lock(&lynx->lock);
 194         if (lynx->pcl_bmap[off] & 1<<bit) {
 195                 lynx->pcl_bmap[off] &= ~(1<<bit);
 196         } else {
 197                 PRINT(KERN_ERR, lynx->id,
 198                       "attempted to free unallocated PCL %d", pclid);
 199         }
 200         spin_unlock(&lynx->lock);
 201 }
 202
 203 /* functions useful for debugging */
 204 static void pretty_print_pcl(const struct ti_pcl *pcl)
 205 {
 206         int i;
 207
 208         printk("PCL next %08x, userdata %08x, status %08x, remtrans %08x, nextbuf %08x\n",
 209                pcl->next, pcl->user_data, pcl->pcl_status,
 210                pcl->remaining_transfer_count, pcl->next_data_buffer);
 211
 212         printk("PCL");
 213         for (i=0; i<13; i++) {
 214                 printk(" c%x:%08x d%x:%08x",
 215                        i, pcl->buffer[i].control, i, pcl->buffer[i].pointer);
 216                 if (!(i & 0x3) && (i != 12)) printk("\nPCL");
 217         }
 218         printk("\n");
 219 }
 220
 221 static void print_pcl(const struct ti_lynx *lynx, pcl_t pclid)
 222 {
 223         struct ti_pcl pcl;
 224
 225         get_pcl(lynx, pclid, &pcl);
 226         pretty_print_pcl(&pcl);
 227 }
 228 #endif
 229
 230
 231
 232 /***********************************
 233  * IEEE-1394 functionality section *
 234  ***********************************/
 235
 236
 237 static int get_phy_reg(struct ti_lynx *lynx, int addr)
 238 {
 239         int retval;
 240         int i = 0;
 241
 242         unsigned long flags;
 243
 244         if (addr > 15) {
 245                 PRINT(KERN_ERR, lynx->id,
 246                       "%s: PHY register address %d out of range",
 247                       __FUNCTION__, addr);
 248                 return -1;
 249         }
 250
 251         spin_lock_irqsave(&lynx->phy_reg_lock, flags);
 252
 253         reg_write(lynx, LINK_PHY, LINK_PHY_READ | LINK_PHY_ADDR(addr));
 254         do {
 255                 retval = reg_read(lynx, LINK_PHY);
 256
 257                 if (i > 10000) {
 258                         PRINT(KERN_ERR, lynx->id, "%s: runaway loop, aborting",
 259                               __FUNCTION__);
 260                         retval = -1;
 261                         break;
 262                 }
 263                 i++;
 264         } while ((retval & 0xf00) != LINK_PHY_RADDR(addr));
 265
 266         reg_write(lynx, LINK_INT_STATUS, LINK_INT_PHY_REG_RCVD);
 267         spin_unlock_irqrestore(&lynx->phy_reg_lock, flags);
 268
 269         if (retval != -1) {
 270                 return retval & 0xff;
 271         } else {
 272                 return -1;
 273         }
 274 }
 275
 276 static int set_phy_reg(struct ti_lynx *lynx, int addr, int val)
 277 {
 278         unsigned long flags;
 279
 280         if (addr > 15) {
 281                 PRINT(KERN_ERR, lynx->id,
 282                       "%s: PHY register address %d out of range", __FUNCTION__, addr);
 283                 return -1;
 284         }
 285
 286         if (val > 0xff) {
 287                 PRINT(KERN_ERR, lynx->id,
 288                       "%s: PHY register value %d out of range", __FUNCTION__, val);
 289                 return -1;
 290         }
 291
 292         spin_lock_irqsave(&lynx->phy_reg_lock, flags);
 293
 294         reg_write(lynx, LINK_PHY, LINK_PHY_WRITE | LINK_PHY_ADDR(addr)
 295                   | LINK_PHY_WDATA(val));
 296
 297         spin_unlock_irqrestore(&lynx->phy_reg_lock, flags);
 298
 299         return 0;
 300 }
 301
 302 static int sel_phy_reg_page(struct ti_lynx *lynx, int page)
 303 {
 304         int reg;
 305
 306         if (page > 7) {
 307                 PRINT(KERN_ERR, lynx->id,
 308                       "%s: PHY page %d out of range", __FUNCTION__, page);
 309                 return -1;
 310         }
 311
 312         reg = get_phy_reg(lynx, 7);
 313         if (reg != -1) {
 314                 reg &= 0x1f;
 315                 reg |= (page << 5);
 316                 set_phy_reg(lynx, 7, reg);
 317                 return 0;
 318         } else {
 319                 return -1;
 320         }
 321 }
 322
 323 #if 0 /* not needed at this time */
 324 static int sel_phy_reg_port(struct ti_lynx *lynx, int port)
 325 {
 326         int reg;
 327
 328         if (port > 15) {
 329                 PRINT(KERN_ERR, lynx->id,
 330                       "%s: PHY port %d out of range", __FUNCTION__, port);
 331                 return -1;
 332         }
 333
 334         reg = get_phy_reg(lynx, 7);
 335         if (reg != -1) {
 336                 reg &= 0xf0;
 337                 reg |= port;
 338                 set_phy_reg(lynx, 7, reg);
 339                 return 0;
 340         } else {
 341                 return -1;
 342         }
 343 }
 344 #endif
 345
 346 static u32 get_phy_vendorid(struct ti_lynx *lynx)
 347 {
 348         u32 pvid = 0;
 349         sel_phy_reg_page(lynx, 1);
 350         pvid |= (get_phy_reg(lynx, 10) << 16);
 351         pvid |= (get_phy_reg(lynx, 11) << 8);
 352         pvid |= get_phy_reg(lynx, 12);
 353         PRINT(KERN_INFO, lynx->id, "PHY vendor id 0x%06x", pvid);
 354         return pvid;
 355 }
 356
 357 static u32 get_phy_productid(struct ti_lynx *lynx)
 358 {
 359         u32 id = 0;
 360         sel_phy_reg_page(lynx, 1);
 361         id |= (get_phy_reg(lynx, 13) << 16);
 362         id |= (get_phy_reg(lynx, 14) << 8);
 363         id |= get_phy_reg(lynx, 15);
 364         PRINT(KERN_INFO, lynx->id, "PHY product id 0x%06x", id);
 365         return id;
 366 }
 367
 368 static quadlet_t generate_own_selfid(struct ti_lynx *lynx,
 369                                      struct hpsb_host *host)
 370 {
 371         quadlet_t lsid;
 372         char phyreg[7];
 373         int i;
 374
 375         phyreg[0] = lynx->phy_reg0;
 376         for (i = 1; i < 7; i++) {
 377                 phyreg[i] = get_phy_reg(lynx, i);
 378         }
 379
 380         /* FIXME? We assume a TSB21LV03A phy here.  This code doesn't support
 381            more than 3 ports on the PHY anyway. */
 382
 383         lsid = 0x80400000 | ((phyreg[0] & 0xfc) << 22);
 384         lsid |= (phyreg[1] & 0x3f) << 16; /* gap count */
 385         lsid |= (phyreg[2] & 0xc0) << 8; /* max speed */
 386         if (!hpsb_disable_irm)
 387                 lsid |= (phyreg[6] & 0x01) << 11; /* contender (phy dependent) */
 388         /* lsid |= 1 << 11; *//* set contender (hack) */
 389         lsid |= (phyreg[6] & 0x10) >> 3; /* initiated reset */
 390
 391         for (i = 0; i < (phyreg[2] & 0xf); i++) { /* ports */
 392                 if (phyreg[3 + i] & 0x4) {
 393                         lsid |= (((phyreg[3 + i] & 0x8) | 0x10) >> 3)
 394                                 << (6 - i*2);
 395                 } else {
 396                         lsid |= 1 << (6 - i*2);
 397                 }
 398         }
 399
 400         cpu_to_be32s(&lsid);
 401         PRINT(KERN_DEBUG, lynx->id, "generated own selfid 0x%x", lsid);
 402         return lsid;
 403 }
 404
 405 static void handle_selfid(struct ti_lynx *lynx, struct hpsb_host *host)
 406 {
 407         quadlet_t *q = lynx->rcv_page;
 408         int phyid, isroot, size;
 409         quadlet_t lsid = 0;
 410         int i;
 411
 412         if (lynx->phy_reg0 == -1 || lynx->selfid_size == -1) return;
 413
 414         size = lynx->selfid_size;
 415         phyid = lynx->phy_reg0;
 416
 417         i = (size > 16 ? 16 : size) / 4 - 1;
 418         while (i >= 0) {
 419                 cpu_to_be32s(&q[i]);
 420                 i--;
 421         }
 422
 423         if (!lynx->phyic.reg_1394a) {
 424                 lsid = generate_own_selfid(lynx, host);
 425         }
 426
 427         isroot = (phyid & 2) != 0;
 428         phyid >>= 2;
 429         PRINT(KERN_INFO, lynx->id, "SelfID process finished (phyid %d, %s)",
 430               phyid, (isroot ? "root" : "not root"));
 431         reg_write(lynx, LINK_ID, (0xffc0 | phyid) << 16);
 432
 433         if (!lynx->phyic.reg_1394a && !size) {
 434                 hpsb_selfid_received(host, lsid);
 435         }
 436
 437         while (size > 0) {
 438                 struct selfid *sid = (struct selfid *)q;
 439
 440                 if (!lynx->phyic.reg_1394a && !sid->extended
 441                     && (sid->phy_id == (phyid + 1))) {
 442                         hpsb_selfid_received(host, lsid);
 443                 }
 444
 445                 if (q[0] == ~q[1]) {
 446                         PRINT(KERN_DEBUG, lynx->id, "SelfID packet 0x%x rcvd",
 447                               q[0]);
 448                         hpsb_selfid_received(host, q[0]);
 449                 } else {
 450                         PRINT(KERN_INFO, lynx->id,
 451                               "inconsistent selfid 0x%x/0x%x", q[0], q[1]);
 452                 }
 453                 q += 2;
 454                 size -= 8;
 455         }
 456
 457         if (!lynx->phyic.reg_1394a && isroot && phyid != 0) {
 458                 hpsb_selfid_received(host, lsid);
 459         }
 460
 461         hpsb_selfid_complete(host, phyid, isroot);
 462
 463         if (host->in_bus_reset) return; /* in bus reset again */
 464
 465         if (isroot) reg_set_bits(lynx, LINK_CONTROL, LINK_CONTROL_CYCMASTER); //FIXME: I do not think, we need this here
 466         reg_set_bits(lynx, LINK_CONTROL,
 467                      LINK_CONTROL_RCV_CMP_VALID | LINK_CONTROL_TX_ASYNC_EN
 468                      | LINK_CONTROL_RX_ASYNC_EN | LINK_CONTROL_CYCTIMEREN);
 469 }
 470
 471
 472
 473 /* This must be called with the respective queue_lock held. */
 474 static void send_next(struct ti_lynx *lynx, int what)
 475 {
 476         struct ti_pcl pcl;
 477         struct lynx_send_data *d;
 478         struct hpsb_packet *packet;
 479
 480 #if 0 /* has been removed from ieee1394 core */
 481         d = (what == hpsb_iso ? &lynx->iso_send : &lynx->async);
 482 #else
 483         d = &lynx->async;
 484 #endif
 485         if (!list_empty(&d->pcl_queue)) {
 486                 PRINT(KERN_ERR, lynx->id, "trying to queue a new packet in nonempty fifo");
 487                 BUG();
 488         }
 489
 490         packet = driver_packet(d->queue.next);
 491         list_move_tail(&packet->driver_list, &d->pcl_queue);
 492
 493         d->header_dma = pci_map_single(lynx->dev, packet->header,
 494                                        packet->header_size, PCI_DMA_TODEVICE);
 495         if (packet->data_size) {
 496                 d->data_dma = pci_map_single(lynx->dev, packet->data,
 497                                              packet->data_size,
 498                                              PCI_DMA_TODEVICE);
 499         } else {
 500                 d->data_dma = 0;
 501         }
 502
 503         pcl.next = PCL_NEXT_INVALID;
 504         pcl.async_error_next = PCL_NEXT_INVALID;
 505         pcl.pcl_status = 0;
 506         pcl.buffer[0].control = packet->speed_code << 14 | packet->header_size;
 507 #ifndef __BIG_ENDIAN
 508         pcl.buffer[0].control |= PCL_BIGENDIAN;
 509 #endif
 510         pcl.buffer[0].pointer = d->header_dma;
 511         pcl.buffer[1].control = PCL_LAST_BUFF | packet->data_size;
 512         pcl.buffer[1].pointer = d->data_dma;
 513
 514         switch (packet->type) {
 515         case hpsb_async:
 516                 pcl.buffer[0].control |= PCL_CMD_XMT;
 517                 break;
 518 #if 0 /* has been removed from ieee1394 core */
 519         case hpsb_iso:
 520                 pcl.buffer[0].control |= PCL_CMD_XMT | PCL_ISOMODE;
 521                 break;
 522 #endif
 523         case hpsb_raw:
 524                 pcl.buffer[0].control |= PCL_CMD_UNFXMT;
 525                 break;
 526         }
 527
 528         put_pcl(lynx, d->pcl, &pcl);
 529         run_pcl(lynx, d->pcl_start, d->channel);
 530 }
 531
 532
 533 /* called from subsystem core */
 534 static int lynx_transmit(struct hpsb_host *host, struct hpsb_packet *packet)
 535 {
 536         struct ti_lynx *lynx = host->hostdata;
 537         struct lynx_send_data *d;
 538         unsigned long flags;
 539
 540         if (packet->data_size >= 4096) {
 541                 PRINT(KERN_ERR, lynx->id, "transmit packet data too big (%Zd)",
 542                       packet->data_size);
 543                 return -EOVERFLOW;
 544         }
 545
 546         switch (packet->type) {
 547         case hpsb_async:
 548         case hpsb_raw:
 549                 d = &lynx->async;
 550                 break;
 551 #if 0 /* has been removed from ieee1394 core */
 552         case hpsb_iso:
 553                 d = &lynx->iso_send;
 554                 break;
 555 #endif
 556         default:
 557                 PRINT(KERN_ERR, lynx->id, "invalid packet type %d",
 558                       packet->type);
 559                 return -EINVAL;
 560         }
 561
 562         if (packet->tcode == TCODE_WRITEQ
 563             || packet->tcode == TCODE_READQ_RESPONSE) {
 564                 cpu_to_be32s(&packet->header[3]);
 565         }
 566
 567         spin_lock_irqsave(&d->queue_lock, flags);
 568
 569         list_add_tail(&packet->driver_list, &d->queue);
 570         if (list_empty(&d->pcl_queue))
 571                 send_next(lynx, packet->type);
 572
 573         spin_unlock_irqrestore(&d->queue_lock, flags);
 574
 575         return 0;
 576 }
 577
 578
 579 /* called from subsystem core */
 580 static int lynx_devctl(struct hpsb_host *host, enum devctl_cmd cmd, int arg)
 581 {
 582         struct ti_lynx *lynx = host->hostdata;
 583         int retval = 0;
 584         struct hpsb_packet *packet;
 585         LIST_HEAD(packet_list);
 586         unsigned long flags;
 587         int phy_reg;
 588
 589         switch (cmd) {
 590         case RESET_BUS:
 591                 if (reg_read(lynx, LINK_INT_STATUS) & LINK_INT_PHY_BUSRESET) {
 592                         retval = 0;
 593                         break;
 594                 }
 595
 596                 switch (arg) {
 597                 case SHORT_RESET:
 598                         if (lynx->phyic.reg_1394a) {
 599                                 phy_reg = get_phy_reg(lynx, 5);
 600                                 if (phy_reg == -1) {
 601                                         PRINT(KERN_ERR, lynx->id, "cannot reset bus, because read phy reg failed");
 602                                         retval = -1;
 603                                         break;
 604                                 }
 605                                 phy_reg |= 0x40;
 606
 607                                 PRINT(KERN_INFO, lynx->id, "resetting bus (short bus reset) on request");
 608
 609                                 lynx->selfid_size = -1;
 610                                 lynx->phy_reg0 = -1;
 611                                 set_phy_reg(lynx, 5, phy_reg); /* set ISBR */
 612                                 break;
 613                         } else {
 614                                 PRINT(KERN_INFO, lynx->id, "cannot do short bus reset, because of old phy");
 615                                 /* fall through to long bus reset */
 616                         }
 617                 case LONG_RESET:
 618                         phy_reg = get_phy_reg(lynx, 1);
 619                         if (phy_reg == -1) {
 620                                 PRINT(KERN_ERR, lynx->id, "cannot reset bus, because read phy reg failed");
 621                                 retval = -1;
 622                                 break;
 623                         }
 624                         phy_reg |= 0x40;
 625
 626                         PRINT(KERN_INFO, lynx->id, "resetting bus (long bus reset) on request");
 627
 628                         lynx->selfid_size = -1;
 629                         lynx->phy_reg0 = -1;
 630                         set_phy_reg(lynx, 1, phy_reg); /* clear RHB, set IBR */
 631                         break;
 632                 case SHORT_RESET_NO_FORCE_ROOT:
 633                         if (lynx->phyic.reg_1394a) {
 634                                 phy_reg = get_phy_reg(lynx, 1);
 635                                 if (phy_reg == -1) {
 636                                         PRINT(KERN_ERR, lynx->id, "cannot reset bus, because read phy reg failed");
 637                                         retval = -1;
 638                                         break;
 639                                 }
 640                                 if (phy_reg & 0x80) {
 641                                         phy_reg &= ~0x80;
 642                                         set_phy_reg(lynx, 1, phy_reg); /* clear RHB */
 643                                 }
 644
 645                                 phy_reg = get_phy_reg(lynx, 5);
 646                                 if (phy_reg == -1) {
 647                                         PRINT(KERN_ERR, lynx->id, "cannot reset bus, because read phy reg failed");
 648                                         retval = -1;
 649                                         break;
 650                                 }
 651                                 phy_reg |= 0x40;
 652
 653                                 PRINT(KERN_INFO, lynx->id, "resetting bus (short bus reset, no force_root) on request");
 654
 655                                 lynx->selfid_size = -1;
 656                                 lynx->phy_reg0 = -1;
 657                                 set_phy_reg(lynx, 5, phy_reg); /* set ISBR */
 658                                 break;
 659                         } else {
 660                                 PRINT(KERN_INFO, lynx->id, "cannot do short bus reset, because of old phy");
 661                                 /* fall through to long bus reset */
 662                         }
 663                 case LONG_RESET_NO_FORCE_ROOT:
 664                         phy_reg = get_phy_reg(lynx, 1);
 665                         if (phy_reg == -1) {
 666                                 PRINT(KERN_ERR, lynx->id, "cannot reset bus, because read phy reg failed");
 667                                 retval = -1;
 668                                 break;
 669                         }
 670                         phy_reg &= ~0x80;
 671                         phy_reg |= 0x40;
 672
 673                         PRINT(KERN_INFO, lynx->id, "resetting bus (long bus reset, no force_root) on request");
 674
 675                         lynx->selfid_size = -1;
 676                         lynx->phy_reg0 = -1;
 677                         set_phy_reg(lynx, 1, phy_reg); /* clear RHB, set IBR */
 678                         break;
 679                 case SHORT_RESET_FORCE_ROOT:
 680                         if (lynx->phyic.reg_1394a) {
 681                                 phy_reg = get_phy_reg(lynx, 1);
 682                                 if (phy_reg == -1) {
 683                                         PRINT(KERN_ERR, lynx->id, "cannot reset bus, because read phy reg failed");
 684                                         retval = -1;
 685                                         break;
 686                                 }
 687                                 if (!(phy_reg & 0x80)) {
 688                                         phy_reg |= 0x80;
 689                                         set_phy_reg(lynx, 1, phy_reg); /* set RHB */
 690                                 }
 691
 692                                 phy_reg = get_phy_reg(lynx, 5);
 693                                 if (phy_reg == -1) {
 694                                         PRINT(KERN_ERR, lynx->id, "cannot reset bus, because read phy reg failed");
 695                                         retval = -1;
 696                                         break;
 697                                 }
 698                                 phy_reg |= 0x40;
 699
 700                                 PRINT(KERN_INFO, lynx->id, "resetting bus (short bus reset, force_root set) on request");
 701
 702                                 lynx->selfid_size = -1;
 703                                 lynx->phy_reg0 = -1;
 704                                 set_phy_reg(lynx, 5, phy_reg); /* set ISBR */
 705                                 break;
 706                         } else {
 707                                 PRINT(KERN_INFO, lynx->id, "cannot do short bus reset, because of old phy");
 708                                 /* fall through to long bus reset */
 709                         }
 710                 case LONG_RESET_FORCE_ROOT:
 711                         phy_reg = get_phy_reg(lynx, 1);
 712                         if (phy_reg == -1) {
 713                                 PRINT(KERN_ERR, lynx->id, "cannot reset bus, because read phy reg failed");
 714                                 retval = -1;
 715                                 break;
 716                         }
 717                         phy_reg |= 0xc0;
 718
 719                         PRINT(KERN_INFO, lynx->id, "resetting bus (long bus reset, force_root set) on request");
 720
 721                         lynx->selfid_size = -1;
 722                         lynx->phy_reg0 = -1;
 723                         set_phy_reg(lynx, 1, phy_reg); /* set IBR and RHB */
 724                         break;
 725                 default:
 726                         PRINT(KERN_ERR, lynx->id, "unknown argument for reset_bus command %d", arg);
 727                         retval = -1;
 728                 }
 729
 730                 break;
 731
 732         case GET_CYCLE_COUNTER:
 733                 retval = reg_read(lynx, CYCLE_TIMER);
 734                 break;
 735
 736         case SET_CYCLE_COUNTER:
 737                 reg_write(lynx, CYCLE_TIMER, arg);
 738                 break;
 739
 740         case SET_BUS_ID:
 741                 reg_write(lynx, LINK_ID,
 742                           (arg << 22) | (reg_read(lynx, LINK_ID) & 0x003f0000));
 743                 break;
 744
 745         case ACT_CYCLE_MASTER:
 746                 if (arg) {
 747                         reg_set_bits(lynx, LINK_CONTROL,
 748                                      LINK_CONTROL_CYCMASTER);
 749                 } else {
 750                         reg_clear_bits(lynx, LINK_CONTROL,
 751                                        LINK_CONTROL_CYCMASTER);
 752                 }
 753                 break;
 754
 755         case CANCEL_REQUESTS:
 756                 spin_lock_irqsave(&lynx->async.queue_lock, flags);
 757
 758                 reg_write(lynx, DMA_CHAN_CTRL(CHANNEL_ASYNC_SEND), 0);
 759                 list_splice(&lynx->async.queue, &packet_list);
 760                 INIT_LIST_HEAD(&lynx->async.queue);
 761
 762                 if (list_empty(&lynx->async.pcl_queue)) {
 763                         spin_unlock_irqrestore(&lynx->async.queue_lock, flags);
 764                         PRINTD(KERN_DEBUG, lynx->id, "no async packet in PCL to cancel");
 765                 } else {
 766                         struct ti_pcl pcl;
 767                         u32 ack;
 768                         struct hpsb_packet *packet;
 769
 770                         PRINT(KERN_INFO, lynx->id, "cancelling async packet, that was already in PCL");
 771
 772                         get_pcl(lynx, lynx->async.pcl, &pcl);
 773
 774                         packet = driver_packet(lynx->async.pcl_queue.next);
 775                         list_del_init(&packet->driver_list);
 776
 777                         pci_unmap_single(lynx->dev, lynx->async.header_dma,
 778                                          packet->header_size, PCI_DMA_TODEVICE);
 779                         if (packet->data_size) {
 780                                 pci_unmap_single(lynx->dev, lynx->async.data_dma,
 781                                                  packet->data_size, PCI_DMA_TODEVICE);
 782                         }
 783
 784                         spin_unlock_irqrestore(&lynx->async.queue_lock, flags);
 785
 786                         if (pcl.pcl_status & DMA_CHAN_STAT_PKTCMPL) {
 787                                 if (pcl.pcl_status & DMA_CHAN_STAT_SPECIALACK) {
 788                                         ack = (pcl.pcl_status >> 15) & 0xf;
 789                                         PRINTD(KERN_INFO, lynx->id, "special ack %d", ack);
 790                                         ack = (ack == 1 ? ACKX_TIMEOUT : ACKX_SEND_ERROR);
 791                                 } else {
 792                                         ack = (pcl.pcl_status >> 15) & 0xf;
 793                                 }
 794                         } else {
 795                                 PRINT(KERN_INFO, lynx->id, "async packet was not completed");
 796                                 ack = ACKX_ABORTED;
 797                         }
 798                         hpsb_packet_sent(host, packet, ack);
 799                 }
 800
 801                 while (!list_empty(&packet_list)) {
 802                         packet = driver_packet(packet_list.next);
 803                         list_del_init(&packet->driver_list);
 804                         hpsb_packet_sent(host, packet, ACKX_ABORTED);
 805                 }
 806
 807                 break;
 808 #if 0 /* has been removed from ieee1394 core */
 809         case ISO_LISTEN_CHANNEL:
 810                 spin_lock_irqsave(&lynx->iso_rcv.lock, flags);
 811
 812                 if (lynx->iso_rcv.chan_count++ == 0) {
 813                         reg_write(lynx, DMA_WORD1_CMP_ENABLE(CHANNEL_ISO_RCV),
 814                                   DMA_WORD1_CMP_ENABLE_MASTER);
 815                 }
 816
 817                 spin_unlock_irqrestore(&lynx->iso_rcv.lock, flags);
 818                 break;
 819
 820         case ISO_UNLISTEN_CHANNEL:
 821                 spin_lock_irqsave(&lynx->iso_rcv.lock, flags);
 822
 823                 if (--lynx->iso_rcv.chan_count == 0) {
 824                         reg_write(lynx, DMA_WORD1_CMP_ENABLE(CHANNEL_ISO_RCV),
 825                                   0);
 826                 }
 827
 828                 spin_unlock_irqrestore(&lynx->iso_rcv.lock, flags);
 829                 break;
 830 #endif
 831         default:
 832                 PRINT(KERN_ERR, lynx->id, "unknown devctl command %d", cmd);
 833                 retval = -1;
 834         }
 835
 836         return retval;
 837 }
 838
 839
 840 /***************************************
 841  * IEEE-1394 functionality section END *
 842  ***************************************/
 843
 844
 845 /********************************************************
 846  * Global stuff (interrupt handler, init/shutdown code) *
 847  ********************************************************/
 848
 849
 850 static irqreturn_t lynx_irq_handler(int irq, void *dev_id)
 851 {
 852         struct ti_lynx *lynx = (struct ti_lynx *)dev_id;
 853         struct hpsb_host *host = lynx->host;
 854         u32 intmask;
 855         u32 linkint;
 856
 857         linkint = reg_read(lynx, LINK_INT_STATUS);
 858         intmask = reg_read(lynx, PCI_INT_STATUS);
 859
 860         if (!(intmask & PCI_INT_INT_PEND))
 861                 return IRQ_NONE;
 862
 863         PRINTD(KERN_DEBUG, lynx->id, "interrupt: 0x%08x / 0x%08x", intmask,
 864                linkint);
 865
 866         reg_write(lynx, LINK_INT_STATUS, linkint);
 867         reg_write(lynx, PCI_INT_STATUS, intmask);
 868
 869         if (intmask & PCI_INT_1394) {
 870                 if (linkint & LINK_INT_PHY_TIMEOUT) {
 871                         PRINT(KERN_INFO, lynx->id, "PHY timeout occurred");
 872                 }
 873                 if (linkint & LINK_INT_PHY_BUSRESET) {
 874                         PRINT(KERN_INFO, lynx->id, "bus reset interrupt");
 875                         lynx->selfid_size = -1;
 876                         lynx->phy_reg0 = -1;
 877                         if (!host->in_bus_reset)
 878                                 hpsb_bus_reset(host);
 879                 }
 880                 if (linkint & LINK_INT_PHY_REG_RCVD) {
 881                         u32 reg;
 882
 883                         spin_lock(&lynx->phy_reg_lock);
 884                         reg = reg_read(lynx, LINK_PHY);
 885                         spin_unlock(&lynx->phy_reg_lock);
 886
 887                         if (!host->in_bus_reset) {
 888                                 PRINT(KERN_INFO, lynx->id,
 889                                       "phy reg received without reset");
 890                         } else if (reg & 0xf00) {
 891                                 PRINT(KERN_INFO, lynx->id,
 892                                       "unsolicited phy reg %d received",
 893                                       (reg >> 8) & 0xf);
 894                         } else {
 895                                 lynx->phy_reg0 = reg & 0xff;
 896                                 handle_selfid(lynx, host);
 897                         }
 898                 }
 899                 if (linkint & LINK_INT_ISO_STUCK) {
 900                         PRINT(KERN_INFO, lynx->id, "isochronous transmitter stuck");
 901                 }
 902                 if (linkint & LINK_INT_ASYNC_STUCK) {
 903                         PRINT(KERN_INFO, lynx->id, "asynchronous transmitter stuck");
 904                 }
 905                 if (linkint & LINK_INT_SENT_REJECT) {
 906                         PRINT(KERN_INFO, lynx->id, "sent reject");
 907                 }
 908                 if (linkint & LINK_INT_TX_INVALID_TC) {
 909                         PRINT(KERN_INFO, lynx->id, "invalid transaction code");
 910                 }
 911                 if (linkint & LINK_INT_GRF_OVERFLOW) {
 912                         /* flush FIFO if overflow happens during reset */
 913                         if (host->in_bus_reset)
 914                                 reg_write(lynx, FIFO_CONTROL,
 915                                           FIFO_CONTROL_GRF_FLUSH);
 916                         PRINT(KERN_INFO, lynx->id, "GRF overflow");
 917                 }
 918                 if (linkint & LINK_INT_ITF_UNDERFLOW) {
 919                         PRINT(KERN_INFO, lynx->id, "ITF underflow");
 920                 }
 921                 if (linkint & LINK_INT_ATF_UNDERFLOW) {
 922                         PRINT(KERN_INFO, lynx->id, "ATF underflow");
 923                 }
 924         }
 925
 926         if (intmask & PCI_INT_DMA_HLT(CHANNEL_ISO_RCV)) {
 927                 PRINTD(KERN_DEBUG, lynx->id, "iso receive");
 928
 929                 spin_lock(&lynx->iso_rcv.lock);
 930
 931                 lynx->iso_rcv.stat[lynx->iso_rcv.next] =
 932                         reg_read(lynx, DMA_CHAN_STAT(CHANNEL_ISO_RCV));
 933
 934                 lynx->iso_rcv.used++;
 935                 lynx->iso_rcv.next = (lynx->iso_rcv.next + 1) % NUM_ISORCV_PCL;
 936
 937                 if ((lynx->iso_rcv.next == lynx->iso_rcv.last)
 938                     || !lynx->iso_rcv.chan_count) {
 939                         PRINTD(KERN_DEBUG, lynx->id, "stopped");
 940                         reg_write(lynx, DMA_WORD1_CMP_ENABLE(CHANNEL_ISO_RCV), 0);
 941                 }
 942
 943                 run_sub_pcl(lynx, lynx->iso_rcv.pcl_start, lynx->iso_rcv.next,
 944                             CHANNEL_ISO_RCV);
 945
 946                 spin_unlock(&lynx->iso_rcv.lock);
 947
 948                 tasklet_schedule(&lynx->iso_rcv.tq);
 949         }
 950
 951         if (intmask & PCI_INT_DMA_HLT(CHANNEL_ASYNC_SEND)) {
 952                 PRINTD(KERN_DEBUG, lynx->id, "async sent");
 953                 spin_lock(&lynx->async.queue_lock);
 954
 955                 if (list_empty(&lynx->async.pcl_queue)) {
 956                         spin_unlock(&lynx->async.queue_lock);
 957                         PRINT(KERN_WARNING, lynx->id, "async dma halted, but no queued packet (maybe it was cancelled)");
 958                 } else {
 959                         struct ti_pcl pcl;
 960                         u32 ack;
 961                         struct hpsb_packet *packet;
 962
 963                         get_pcl(lynx, lynx->async.pcl, &pcl);
 964
 965                         packet = driver_packet(lynx->async.pcl_queue.next);
 966                         list_del_init(&packet->driver_list);
 967
 968                         pci_unmap_single(lynx->dev, lynx->async.header_dma,
 969                                          packet->header_size, PCI_DMA_TODEVICE);
 970                         if (packet->data_size) {
 971                                 pci_unmap_single(lynx->dev, lynx->async.data_dma,
 972                                                  packet->data_size, PCI_DMA_TODEVICE);
 973                         }
 974
 975                         if (!list_empty(&lynx->async.queue)) {
 976                                 send_next(lynx, hpsb_async);
 977                         }
 978
 979                         spin_unlock(&lynx->async.queue_lock);
 980
 981                         if (pcl.pcl_status & DMA_CHAN_STAT_PKTCMPL) {
 982                                 if (pcl.pcl_status & DMA_CHAN_STAT_SPECIALACK) {
 983                                         ack = (pcl.pcl_status >> 15) & 0xf;
 984                                         PRINTD(KERN_INFO, lynx->id, "special ack %d", ack);
 985                                         ack = (ack == 1 ? ACKX_TIMEOUT : ACKX_SEND_ERROR);
 986                                 } else {
 987                                         ack = (pcl.pcl_status >> 15) & 0xf;
 988                                 }
 989                         } else {
 990                                 PRINT(KERN_INFO, lynx->id, "async packet was not completed");
 991                                 ack = ACKX_SEND_ERROR;
 992                         }
 993                         hpsb_packet_sent(host, packet, ack);
 994                 }
 995         }
 996
 997         if (intmask & PCI_INT_DMA_HLT(CHANNEL_ISO_SEND)) {
 998                 PRINTD(KERN_DEBUG, lynx->id, "iso sent");
 999                 spin_lock(&lynx->iso_send.queue_lock);
1000
1001                 if (list_empty(&lynx->iso_send.pcl_queue)) {
1002                         spin_unlock(&lynx->iso_send.queue_lock);
1003                         PRINT(KERN_ERR, lynx->id, "iso send dma halted, but no queued packet");
1004                 } else {
1005                         struct ti_pcl pcl;
1006                         u32 ack;
1007                         struct hpsb_packet *packet;
1008
1009                         get_pcl(lynx, lynx->iso_send.pcl, &pcl);
1010
1011                         packet = driver_packet(lynx->iso_send.pcl_queue.next);
1012                         list_del_init(&packet->driver_list);
1013
1014                         pci_unmap_single(lynx->dev, lynx->iso_send.header_dma,
1015                                          packet->header_size, PCI_DMA_TODEVICE);
1016                         if (packet->data_size) {
1017                                 pci_unmap_single(lynx->dev, lynx->iso_send.data_dma,
1018                                                  packet->data_size, PCI_DMA_TODEVICE);
1019                         }
1020 #if 0 /* has been removed from ieee1394 core */
1021                         if (!list_empty(&lynx->iso_send.queue)) {
1022                                 send_next(lynx, hpsb_iso);
1023                         }
1024 #endif
1025                         spin_unlock(&lynx->iso_send.queue_lock);
1026
1027                         if (pcl.pcl_status & DMA_CHAN_STAT_PKTCMPL) {
1028                                 if (pcl.pcl_status & DMA_CHAN_STAT_SPECIALACK) {
1029                                         ack = (pcl.pcl_status >> 15) & 0xf;
1030                                         PRINTD(KERN_INFO, lynx->id, "special ack %d", ack);
1031                                         ack = (ack == 1 ? ACKX_TIMEOUT : ACKX_SEND_ERROR);
1032                                 } else {
1033                                         ack = (pcl.pcl_status >> 15) & 0xf;
1034                                 }
1035                         } else {
1036                                 PRINT(KERN_INFO, lynx->id, "iso send packet was not completed");
1037                                 ack = ACKX_SEND_ERROR;
1038                         }
1039
1040                         hpsb_packet_sent(host, packet, ack); //FIXME: maybe we should just use ACK_COMPLETE and ACKX_SEND_ERROR
1041                 }
1042         }
1043
1044         if (intmask & PCI_INT_DMA_HLT(CHANNEL_ASYNC_RCV)) {
1045                 /* general receive DMA completed */
1046                 int stat = reg_read(lynx, DMA_CHAN_STAT(CHANNEL_ASYNC_RCV));
1047
1048                 PRINTD(KERN_DEBUG, lynx->id, "received packet size %d",
1049                        stat & 0x1fff);
1050
1051                 if (stat & DMA_CHAN_STAT_SELFID) {
1052                         lynx->selfid_size = stat & 0x1fff;
1053                         handle_selfid(lynx, host);
1054                 } else {
1055                         quadlet_t *q_data = lynx->rcv_page;
1056                         if ((*q_data >> 4 & 0xf) == TCODE_READQ_RESPONSE
1057                             || (*q_data >> 4 & 0xf) == TCODE_WRITEQ) {
1058                                 cpu_to_be32s(q_data + 3);
1059                         }
1060                         hpsb_packet_received(host, q_data, stat & 0x1fff, 0);
1061                 }
1062
1063                 run_pcl(lynx, lynx->rcv_pcl_start, CHANNEL_ASYNC_RCV);
1064         }
1065
1066         return IRQ_HANDLED;
1067 }
1068
1069
1070 static void iso_rcv_bh(struct ti_lynx *lynx)
1071 {
1072         unsigned int idx;
1073         quadlet_t *data;
1074         unsigned long flags;
1075
1076         spin_lock_irqsave(&lynx->iso_rcv.lock, flags);
1077
1078         while (lynx->iso_rcv.used) {
1079                 idx = lynx->iso_rcv.last;
1080                 spin_unlock_irqrestore(&lynx->iso_rcv.lock, flags);
1081
1082                 data = lynx->iso_rcv.page[idx / ISORCV_PER_PAGE]
1083                         + (idx % ISORCV_PER_PAGE) * MAX_ISORCV_SIZE;
1084
1085                 if ((*data >> 16) + 4 != (lynx->iso_rcv.stat[idx] & 0x1fff)) {
1086                         PRINT(KERN_ERR, lynx->id,
1087                               "iso length mismatch 0x%08x/0x%08x", *data,
1088                               lynx->iso_rcv.stat[idx]);
1089                 }
1090
1091                 if (lynx->iso_rcv.stat[idx]
1092                     & (DMA_CHAN_STAT_PCIERR | DMA_CHAN_STAT_PKTERR)) {
1093                         PRINT(KERN_INFO, lynx->id,
1094                               "iso receive error on %d to 0x%p", idx, data);
1095                 } else {
1096                         hpsb_packet_received(lynx->host, data,
1097                                              lynx->iso_rcv.stat[idx] & 0x1fff,
1098                                              0);
1099                 }
1100
1101                 spin_lock_irqsave(&lynx->iso_rcv.lock, flags);
1102                 lynx->iso_rcv.last = (idx + 1) % NUM_ISORCV_PCL;
1103                 lynx->iso_rcv.used--;
1104         }
1105
1106         if (lynx->iso_rcv.chan_count) {
1107                 reg_write(lynx, DMA_WORD1_CMP_ENABLE(CHANNEL_ISO_RCV),
1108                           DMA_WORD1_CMP_ENABLE_MASTER);
1109         }
1110         spin_unlock_irqrestore(&lynx->iso_rcv.lock, flags);
1111 }
1112
1113
1114 static void remove_card(struct pci_dev *dev)
1115 {
1116         struct ti_lynx *lynx;
1117         struct device *lynx_dev;
1118         int i;
1119
1120         lynx = pci_get_drvdata(dev);
1121         if (!lynx) return;
1122         pci_set_drvdata(dev, NULL);
1123
1124         lynx_dev = get_device(&lynx->host->device);
1125
1126         switch (lynx->state) {
1127         case is_host:
1128                 reg_write(lynx, PCI_INT_ENABLE, 0);
1129                 hpsb_remove_host(lynx->host);
1130         case have_intr:
1131                 reg_write(lynx, PCI_INT_ENABLE, 0);
1132                 free_irq(lynx->dev->irq, lynx);
1133
1134                 /* Disable IRM Contender and LCtrl */
1135                 if (lynx->phyic.reg_1394a)
1136                         set_phy_reg(lynx, 4, ~0xc0 & get_phy_reg(lynx, 4));
1137
1138                 /* Let all other nodes know to ignore us */
1139                 lynx_devctl(lynx->host, RESET_BUS, LONG_RESET_NO_FORCE_ROOT);
1140
1141         case have_iomappings:
1142                 reg_set_bits(lynx, MISC_CONTROL, MISC_CONTROL_SWRESET);
1143                 /* Fix buggy cards with autoboot pin not tied low: */
1144                 reg_write(lynx, DMA0_CHAN_CTRL, 0);
1145                 iounmap(lynx->registers);
1146                 iounmap(lynx->local_rom);
1147                 iounmap(lynx->local_ram);
1148                 iounmap(lynx->aux_port);
1149         case have_1394_buffers:
1150                 for (i = 0; i < ISORCV_PAGES; i++) {
1151                         if (lynx->iso_rcv.page[i]) {
1152                                 pci_free_consistent(lynx->dev, PAGE_SIZE,
1153                                                     lynx->iso_rcv.page[i],
1154                                                     lynx->iso_rcv.page_dma[i]);
1155                         }
1156                 }
1157                 pci_free_consistent(lynx->dev, PAGE_SIZE, lynx->rcv_page,
1158                                     lynx->rcv_page_dma);
1159         case have_aux_buf:
1160         case have_pcl_mem:
1161                 pci_free_consistent(lynx->dev, LOCALRAM_SIZE, lynx->pcl_mem,
1162                                     lynx->pcl_mem_dma);
1163         case clear:
1164                 /* do nothing - already freed */
1165                 ;
1166         }
1167
1168         tasklet_kill(&lynx->iso_rcv.tq);
1169
1170         if (lynx_dev)
1171                 put_device(lynx_dev);
1172 }
1173
1174
1175 static int __devinit add_card(struct pci_dev *dev,
1176                               const struct pci_device_id *devid_is_unused)
1177 {
1178 #define FAIL(fmt, args...) do { \
1179         PRINT_G(KERN_ERR, fmt , ## args); \
1180         remove_card(dev); \
1181         return error; \
1182         } while (0)
1183
1184         char irq_buf[16];
1185         struct hpsb_host *host;
1186         struct ti_lynx *lynx; /* shortcut to currently handled device */
1187         struct ti_pcl pcl;
1188         u32 *pcli;
1189         int i;
1190         int error;
1191
1192         error = -ENXIO;
1193
1194         if (pci_set_dma_mask(dev, DMA_32BIT_MASK))
1195                 FAIL("DMA address limits not supported for PCILynx hardware");
1196         if (pci_enable_device(dev))
1197                 FAIL("failed to enable PCILynx hardware");
1198         pci_set_master(dev);
1199
1200         error = -ENOMEM;
1201
1202         host = hpsb_alloc_host(&lynx_driver, sizeof(struct ti_lynx), &dev->dev);
1203         if (!host) FAIL("failed to allocate control structure memory");
1204
1205         lynx = host->hostdata;
1206         lynx->id = card_id++;
1207         lynx->dev = dev;
1208         lynx->state = clear;
1209         lynx->host = host;
1210         host->pdev = dev;
1211         pci_set_drvdata(dev, lynx);
1212
1213         spin_lock_init(&lynx->lock);
1214         spin_lock_init(&lynx->phy_reg_lock);
1215
1216         lynx->pcl_mem = pci_alloc_consistent(dev, LOCALRAM_SIZE,
1217                                              &lynx->pcl_mem_dma);
1218
1219         if (lynx->pcl_mem != NULL) {
1220                 lynx->state = have_pcl_mem;
1221                 PRINT(KERN_INFO, lynx->id,
1222                       "allocated PCL memory %d Bytes @ 0x%p", LOCALRAM_SIZE,
1223                       lynx->pcl_mem);
1224         } else {
1225                 FAIL("failed to allocate PCL memory area");
1226         }
1227
1228         lynx->rcv_page = pci_alloc_consistent(dev, PAGE_SIZE,
1229                                               &lynx->rcv_page_dma);
1230         if (lynx->rcv_page == NULL) {
1231                 FAIL("failed to allocate receive buffer");
1232         }
1233         lynx->state = have_1394_buffers;
1234
1235         for (i = 0; i < ISORCV_PAGES; i++) {
1236                 lynx->iso_rcv.page[i] =
1237                         pci_alloc_consistent(dev, PAGE_SIZE,
1238                                              &lynx->iso_rcv.page_dma[i]);
1239                 if (lynx->iso_rcv.page[i] == NULL) {
1240                         FAIL("failed to allocate iso receive buffers");
1241                 }
1242         }
1243
1244         lynx->registers = ioremap_nocache(pci_resource_start(dev,0),
1245                                           PCILYNX_MAX_REGISTER);
1246         lynx->local_ram = ioremap(pci_resource_start(dev,1), PCILYNX_MAX_MEMORY);
1247         lynx->aux_port  = ioremap(pci_resource_start(dev,2), PCILYNX_MAX_MEMORY);
1248         lynx->local_rom = ioremap(pci_resource_start(dev,PCI_ROM_RESOURCE),
1249                                   PCILYNX_MAX_MEMORY);
1250         lynx->state = have_iomappings;
1251
1252         if (lynx->registers == NULL) {
1253                 FAIL("failed to remap registers - card not accessible");
1254         }
1255
1256         reg_set_bits(lynx, MISC_CONTROL, MISC_CONTROL_SWRESET);
1257         /* Fix buggy cards with autoboot pin not tied low: */
1258         reg_write(lynx, DMA0_CHAN_CTRL, 0);
1259
1260         sprintf (irq_buf, "%d", dev->irq);
1261
1262         if (!request_irq(dev->irq, lynx_irq_handler, IRQF_SHARED,
1263                          PCILYNX_DRIVER_NAME, lynx)) {
1264                 PRINT(KERN_INFO, lynx->id, "allocated interrupt %s", irq_buf);
1265                 lynx->state = have_intr;
1266         } else {
1267                 FAIL("failed to allocate shared interrupt %s", irq_buf);
1268         }
1269
1270         /* alloc_pcl return values are not checked, it is expected that the
1271          * provided PCL space is sufficient for the initial allocations */
1272         lynx->rcv_pcl = alloc_pcl(lynx);
1273         lynx->rcv_pcl_start = alloc_pcl(lynx);
1274         lynx->async.pcl = alloc_pcl(lynx);
1275         lynx->async.pcl_start = alloc_pcl(lynx);
1276         lynx->iso_send.pcl = alloc_pcl(lynx);
1277         lynx->iso_send.pcl_start = alloc_pcl(lynx);
1278
1279         for (i = 0; i < NUM_ISORCV_PCL; i++) {
1280                 lynx->iso_rcv.pcl[i] = alloc_pcl(lynx);
1281         }
1282         lynx->iso_rcv.pcl_start = alloc_pcl(lynx);
1283
1284         /* all allocations successful - simple init stuff follows */
1285
1286         reg_write(lynx, PCI_INT_ENABLE, PCI_INT_DMA_ALL);
1287
1288         tasklet_init(&lynx->iso_rcv.tq, (void (*)(unsigned long))iso_rcv_bh,
1289                      (unsigned long)lynx);
1290
1291         spin_lock_init(&lynx->iso_rcv.lock);
1292
1293         spin_lock_init(&lynx->async.queue_lock);
1294         lynx->async.channel = CHANNEL_ASYNC_SEND;
1295         spin_lock_init(&lynx->iso_send.queue_lock);
1296         lynx->iso_send.channel = CHANNEL_ISO_SEND;
1297
1298         PRINT(KERN_INFO, lynx->id, "remapped memory spaces reg 0x%p, rom 0x%p, "
1299               "ram 0x%p, aux 0x%p", lynx->registers, lynx->local_rom,
1300               lynx->local_ram, lynx->aux_port);
1301
1302         /* now, looking for PHY register set */
1303         if ((get_phy_reg(lynx, 2) & 0xe0) == 0xe0) {
1304                 lynx->phyic.reg_1394a = 1;
1305                 PRINT(KERN_INFO, lynx->id,
1306                       "found 1394a conform PHY (using extended register set)");
1307                 lynx->phyic.vendor = get_phy_vendorid(lynx);
1308                 lynx->phyic.product = get_phy_productid(lynx);
1309         } else {
1310                 lynx->phyic.reg_1394a = 0;
1311                 PRINT(KERN_INFO, lynx->id, "found old 1394 PHY");
1312         }
1313
1314         lynx->selfid_size = -1;
1315         lynx->phy_reg0 = -1;
1316
1317         INIT_LIST_HEAD(&lynx->async.queue);
1318         INIT_LIST_HEAD(&lynx->async.pcl_queue);
1319         INIT_LIST_HEAD(&lynx->iso_send.queue);
1320         INIT_LIST_HEAD(&lynx->iso_send.pcl_queue);
1321
1322         pcl.next = pcl_bus(lynx, lynx->rcv_pcl);
1323         put_pcl(lynx, lynx->rcv_pcl_start, &pcl);
1324
1325         pcl.next = PCL_NEXT_INVALID;
1326         pcl.async_error_next = PCL_NEXT_INVALID;
1327
1328         pcl.buffer[0].control = PCL_CMD_RCV | 16;
1329 #ifndef __BIG_ENDIAN
1330         pcl.buffer[0].control |= PCL_BIGENDIAN;
1331 #endif
1332         pcl.buffer[1].control = PCL_LAST_BUFF | 4080;
1333
1334         pcl.buffer[0].pointer = lynx->rcv_page_dma;
1335         pcl.buffer[1].pointer = lynx->rcv_page_dma + 16;
1336         put_pcl(lynx, lynx->rcv_pcl, &pcl);
1337
1338         pcl.next = pcl_bus(lynx, lynx->async.pcl);
1339         pcl.async_error_next = pcl_bus(lynx, lynx->async.pcl);
1340         put_pcl(lynx, lynx->async.pcl_start, &pcl);
1341
1342         pcl.next = pcl_bus(lynx, lynx->iso_send.pcl);
1343         pcl.async_error_next = PCL_NEXT_INVALID;
1344         put_pcl(lynx, lynx->iso_send.pcl_start, &pcl);
1345
1346         pcl.next = PCL_NEXT_INVALID;
1347         pcl.async_error_next = PCL_NEXT_INVALID;
1348         pcl.buffer[0].control = PCL_CMD_RCV | 4;
1349 #ifndef __BIG_ENDIAN
1350         pcl.buffer[0].control |= PCL_BIGENDIAN;
1351 #endif
1352         pcl.buffer[1].control = PCL_LAST_BUFF | 2044;
1353
1354         for (i = 0; i < NUM_ISORCV_PCL; i++) {
1355                 int page = i / ISORCV_PER_PAGE;
1356                 int sec = i % ISORCV_PER_PAGE;
1357
1358                 pcl.buffer[0].pointer = lynx->iso_rcv.page_dma[page]
1359                         + sec * MAX_ISORCV_SIZE;
1360                 pcl.buffer[1].pointer = pcl.buffer[0].pointer + 4;
1361                 put_pcl(lynx, lynx->iso_rcv.pcl[i], &pcl);
1362         }
1363
1364         pcli = (u32 *)&pcl;
1365         for (i = 0; i < NUM_ISORCV_PCL; i++) {
1366                 pcli[i] = pcl_bus(lynx, lynx->iso_rcv.pcl[i]);
1367         }
1368         put_pcl(lynx, lynx->iso_rcv.pcl_start, &pcl);
1369
1370         /* FIFO sizes from left to right: ITF=48 ATF=48 GRF=160 */
1371         reg_write(lynx, FIFO_SIZES, 0x003030a0);
1372         /* 20 byte threshold before triggering PCI transfer */
1373         reg_write(lynx, DMA_GLOBAL_REGISTER, 0x2<<24);
1374         /* threshold on both send FIFOs before transmitting:
1375            FIFO size - cache line size - 1 */
1376         i = reg_read(lynx, PCI_LATENCY_CACHELINE) & 0xff;
1377         i = 0x30 - i - 1;
1378         reg_write(lynx, FIFO_XMIT_THRESHOLD, (i << 8) | i);
1379
1380         reg_set_bits(lynx, PCI_INT_ENABLE, PCI_INT_1394);
1381
1382         reg_write(lynx, LINK_INT_ENABLE, LINK_INT_PHY_TIMEOUT
1383                   | LINK_INT_PHY_REG_RCVD  | LINK_INT_PHY_BUSRESET
1384                   | LINK_INT_ISO_STUCK     | LINK_INT_ASYNC_STUCK
1385                   | LINK_INT_SENT_REJECT   | LINK_INT_TX_INVALID_TC
1386                   | LINK_INT_GRF_OVERFLOW  | LINK_INT_ITF_UNDERFLOW
1387                   | LINK_INT_ATF_UNDERFLOW);
1388
1389         reg_write(lynx, DMA_WORD0_CMP_VALUE(CHANNEL_ASYNC_RCV), 0);
1390         reg_write(lynx, DMA_WORD0_CMP_ENABLE(CHANNEL_ASYNC_RCV), 0xa<<4);
1391         reg_write(lynx, DMA_WORD1_CMP_VALUE(CHANNEL_ASYNC_RCV), 0);
1392         reg_write(lynx, DMA_WORD1_CMP_ENABLE(CHANNEL_ASYNC_RCV),
1393                   DMA_WORD1_CMP_MATCH_LOCAL_NODE | DMA_WORD1_CMP_MATCH_BROADCAST
1394                   | DMA_WORD1_CMP_MATCH_EXACT    | DMA_WORD1_CMP_MATCH_BUS_BCAST
1395                   | DMA_WORD1_CMP_ENABLE_SELF_ID | DMA_WORD1_CMP_ENABLE_MASTER);
1396
1397         run_pcl(lynx, lynx->rcv_pcl_start, CHANNEL_ASYNC_RCV);
1398
1399         reg_write(lynx, DMA_WORD0_CMP_VALUE(CHANNEL_ISO_RCV), 0);
1400         reg_write(lynx, DMA_WORD0_CMP_ENABLE(CHANNEL_ISO_RCV), 0x9<<4);
1401         reg_write(lynx, DMA_WORD1_CMP_VALUE(CHANNEL_ISO_RCV), 0);
1402         reg_write(lynx, DMA_WORD1_CMP_ENABLE(CHANNEL_ISO_RCV), 0);
1403
1404         run_sub_pcl(lynx, lynx->iso_rcv.pcl_start, 0, CHANNEL_ISO_RCV);
1405
1406         reg_write(lynx, LINK_CONTROL, LINK_CONTROL_RCV_CMP_VALID
1407                   | LINK_CONTROL_TX_ISO_EN   | LINK_CONTROL_RX_ISO_EN
1408                   | LINK_CONTROL_TX_ASYNC_EN | LINK_CONTROL_RX_ASYNC_EN
1409                   | LINK_CONTROL_RESET_TX    | LINK_CONTROL_RESET_RX);
1410
1411         if (!lynx->phyic.reg_1394a) {
1412                 if (!hpsb_disable_irm) {
1413                         /* attempt to enable contender bit -FIXME- would this
1414                          * work elsewhere? */
1415                         reg_set_bits(lynx, GPIO_CTRL_A, 0x1);
1416                         reg_write(lynx, GPIO_DATA_BASE + 0x3c, 0x1);
1417                 }
1418         } else {
1419                 /* set the contender (if appropriate) and LCtrl bit in the
1420                  * extended PHY register set. (Should check that PHY_02_EXTENDED
1421                  * is set in register 2?)
1422                  */
1423                 i = get_phy_reg(lynx, 4);
1424                 i |= PHY_04_LCTRL;
1425                 if (hpsb_disable_irm)
1426                         i &= ~PHY_04_CONTENDER;
1427                 else
1428                         i |= PHY_04_CONTENDER;
1429                 if (i != -1) set_phy_reg(lynx, 4, i);
1430         }
1431
1432         if (!skip_eeprom)
1433         {
1434                 /* needed for i2c communication with serial eeprom */
1435                 struct i2c_adapter *i2c_ad;
1436                 struct i2c_algo_bit_data i2c_adapter_data;
1437
1438                 error = -ENOMEM;
1439                 i2c_ad = kmemdup(&bit_ops, sizeof(*i2c_ad), GFP_KERNEL);
1440                 if (!i2c_ad) FAIL("failed to allocate I2C adapter memory");
1441
1442                 i2c_adapter_data = bit_data;
1443                 i2c_ad->algo_data = &i2c_adapter_data;
1444                 i2c_adapter_data.data = lynx;
1445                 i2c_ad->dev.parent = &dev->dev;
1446
1447                 PRINTD(KERN_DEBUG, lynx->id,"original eeprom control: %d",
1448                        reg_read(lynx, SERIAL_EEPROM_CONTROL));
1449
1450                 /* reset hardware to sane state */
1451                 lynx->i2c_driven_state = 0x00000070;
1452                 reg_write(lynx, SERIAL_EEPROM_CONTROL, lynx->i2c_driven_state);
1453
1454                 if (i2c_bit_add_bus(i2c_ad) < 0)
1455                 {
1456                         kfree(i2c_ad);
1457                         error = -ENXIO;
1458                         FAIL("unable to register i2c");
1459                 }
1460                 else
1461                 {
1462                         /* do i2c stuff */
1463                         unsigned char i2c_cmd = 0x10;
1464                         struct i2c_msg msg[2] = { { 0x50, 0, 1, &i2c_cmd },
1465                                                   { 0x50, I2C_M_RD, 20, (unsigned char*) lynx->bus_info_block }
1466                                                 };
1467
1468                         /* we use i2c_transfer, because i2c_smbus_read_block_data does not work properly and we
1469                            do it more efficiently in one transaction rather then using several reads */
1470                         if (i2c_transfer(i2c_ad, msg, 2) < 0) {
1471                                 PRINT(KERN_ERR, lynx->id, "unable to read bus info block from i2c");
1472                         } else {
1473                                 int i;
1474
1475                                 PRINT(KERN_INFO, lynx->id, "got bus info block from serial eeprom");
1476                                 /* FIXME: probably we shoud rewrite the max_rec, max_ROM(1394a),
1477                                  * generation(1394a) and link_spd(1394a) field and recalculate
1478                                  * the CRC */
1479
1480                                 for (i = 0; i < 5 ; i++)
1481                                         PRINTD(KERN_DEBUG, lynx->id, "Businfo block quadlet %i: %08x",
1482                                                i, be32_to_cpu(lynx->bus_info_block[i]));
1483
1484                                 /* info_length, crc_length and 1394 magic number to check, if it is really a bus info block */
1485                                 if (((be32_to_cpu(lynx->bus_info_block[0]) & 0xffff0000) == 0x04040000) &&
1486                                     (lynx->bus_info_block[1] == __constant_cpu_to_be32(0x31333934)))
1487                                 {
1488                                         PRINT(KERN_DEBUG, lynx->id, "read a valid bus info block from");
1489                                 } else {
1490                                         kfree(i2c_ad);
1491                                         error = -ENXIO;
1492                                         FAIL("read something from serial eeprom, but it does not seem to be a valid bus info block");
1493                                 }
1494
1495                         }
1496
1497                         i2c_del_adapter(i2c_ad);
1498                         kfree(i2c_ad);
1499                 }
1500         }
1501
1502         host->csr.guid_hi = be32_to_cpu(lynx->bus_info_block[3]);
1503         host->csr.guid_lo = be32_to_cpu(lynx->bus_info_block[4]);
1504         host->csr.cyc_clk_acc = (be32_to_cpu(lynx->bus_info_block[2]) >> 16) & 0xff;
1505         host->csr.max_rec = (be32_to_cpu(lynx->bus_info_block[2]) >> 12) & 0xf;
1506         if (!lynx->phyic.reg_1394a)
1507                 host->csr.lnk_spd = (get_phy_reg(lynx, 2) & 0xc0) >> 6;
1508         else
1509                 host->csr.lnk_spd = be32_to_cpu(lynx->bus_info_block[2]) & 0x7;
1510
1511         if (hpsb_add_host(host)) {
1512                 error = -ENOMEM;
1513                 FAIL("Failed to register host with highlevel");
1514         }
1515
1516         lynx->state = is_host;
1517
1518         return 0;
1519 #undef FAIL
1520 }
1521
1522
1523 static struct pci_device_id pci_table[] = {
1524         {
1525                 .vendor =    PCI_VENDOR_ID_TI,
1526                 .device =    PCI_DEVICE_ID_TI_PCILYNX,
1527                 .subvendor = PCI_ANY_ID,
1528                 .subdevice = PCI_ANY_ID,
1529         },
1530         { }                     /* Terminating entry */
1531 };
1532
1533 static struct pci_driver lynx_pci_driver = {
1534         .name =     PCILYNX_DRIVER_NAME,
1535         .id_table = pci_table,
1536         .probe =    add_card,
1537         .remove =   remove_card,
1538 };
1539
1540 static struct hpsb_host_driver lynx_driver = {
1541         .owner =           THIS_MODULE,
1542         .name =            PCILYNX_DRIVER_NAME,
1543         .set_hw_config_rom = NULL,
1544         .transmit_packet = lynx_transmit,
1545         .devctl =          lynx_devctl,
1546         .isoctl =          NULL,
1547 };
1548
1549 MODULE_AUTHOR("Andreas E. Bombe <andreas.bombe@munich.netsurf.de>");
1550 MODULE_DESCRIPTION("driver for Texas Instruments PCI Lynx IEEE-1394 controller");
1551 MODULE_LICENSE("GPL");
1552 MODULE_SUPPORTED_DEVICE("pcilynx");
1553 MODULE_DEVICE_TABLE(pci, pci_table);
1554
1555 static int __init pcilynx_init(void)
1556 {
1557         int ret;
1558
1559         ret = pci_register_driver(&lynx_pci_driver);
1560         if (ret < 0) {
1561                 PRINT_G(KERN_ERR, "PCI module init failed");
1562                 return ret;
1563         }
1564
1565         return 0;
1566 }
1567
1568 static void __exit pcilynx_cleanup(void)
1569 {
1570         pci_unregister_driver(&lynx_pci_driver);
1571 }
1572
1573
1574 module_init(pcilynx_init);
1575 module_exit(pcilynx_cleanup);