Merge master.kernel.org:/home/rmk/linux-2.6-arm
[linux-2.6] / drivers / net / wireless / rtl8187_dev.c
1 /*
2  * Linux device driver for RTL8187
3  *
4  * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
5  * Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
6  *
7  * Based on the r8187 driver, which is:
8  * Copyright 2005 Andrea Merello <andreamrl@tiscali.it>, et al.
9  *
10  * Magic delays and register offsets below are taken from the original
11  * r8187 driver sources.  Thanks to Realtek for their support!
12  *
13  * This program is free software; you can redistribute it and/or modify
14  * it under the terms of the GNU General Public License version 2 as
15  * published by the Free Software Foundation.
16  */
17
18 #include <linux/init.h>
19 #include <linux/usb.h>
20 #include <linux/delay.h>
21 #include <linux/etherdevice.h>
22 #include <linux/eeprom_93cx6.h>
23 #include <net/mac80211.h>
24
25 #include "rtl8187.h"
26 #include "rtl8187_rtl8225.h"
27
28 MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
29 MODULE_AUTHOR("Andrea Merello <andreamrl@tiscali.it>");
30 MODULE_DESCRIPTION("RTL8187 USB wireless driver");
31 MODULE_LICENSE("GPL");
32
33 static struct usb_device_id rtl8187_table[] __devinitdata = {
34         /* Realtek */
35         {USB_DEVICE(0x0bda, 0x8187)},
36         /* Netgear */
37         {USB_DEVICE(0x0846, 0x6100)},
38         {USB_DEVICE(0x0846, 0x6a00)},
39         /* HP */
40         {USB_DEVICE(0x03f0, 0xca02)},
41         /* Sitecom */
42         {USB_DEVICE(0x0df6, 0x000d)},
43         {}
44 };
45
46 MODULE_DEVICE_TABLE(usb, rtl8187_table);
47
48 static void rtl8187_iowrite_async_cb(struct urb *urb)
49 {
50         kfree(urb->context);
51         usb_free_urb(urb);
52 }
53
54 static void rtl8187_iowrite_async(struct rtl8187_priv *priv, __le16 addr,
55                                   void *data, u16 len)
56 {
57         struct usb_ctrlrequest *dr;
58         struct urb *urb;
59         struct rtl8187_async_write_data {
60                 u8 data[4];
61                 struct usb_ctrlrequest dr;
62         } *buf;
63
64         buf = kmalloc(sizeof(*buf), GFP_ATOMIC);
65         if (!buf)
66                 return;
67
68         urb = usb_alloc_urb(0, GFP_ATOMIC);
69         if (!urb) {
70                 kfree(buf);
71                 return;
72         }
73
74         dr = &buf->dr;
75
76         dr->bRequestType = RTL8187_REQT_WRITE;
77         dr->bRequest = RTL8187_REQ_SET_REG;
78         dr->wValue = addr;
79         dr->wIndex = 0;
80         dr->wLength = cpu_to_le16(len);
81
82         memcpy(buf, data, len);
83
84         usb_fill_control_urb(urb, priv->udev, usb_sndctrlpipe(priv->udev, 0),
85                              (unsigned char *)dr, buf, len,
86                              rtl8187_iowrite_async_cb, buf);
87         usb_submit_urb(urb, GFP_ATOMIC);
88 }
89
90 static inline void rtl818x_iowrite32_async(struct rtl8187_priv *priv,
91                                            __le32 *addr, u32 val)
92 {
93         __le32 buf = cpu_to_le32(val);
94
95         rtl8187_iowrite_async(priv, cpu_to_le16((unsigned long)addr),
96                               &buf, sizeof(buf));
97 }
98
99 void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data)
100 {
101         struct rtl8187_priv *priv = dev->priv;
102
103         data <<= 8;
104         data |= addr | 0x80;
105
106         rtl818x_iowrite8(priv, &priv->map->PHY[3], (data >> 24) & 0xFF);
107         rtl818x_iowrite8(priv, &priv->map->PHY[2], (data >> 16) & 0xFF);
108         rtl818x_iowrite8(priv, &priv->map->PHY[1], (data >> 8) & 0xFF);
109         rtl818x_iowrite8(priv, &priv->map->PHY[0], data & 0xFF);
110
111         msleep(1);
112 }
113
114 static void rtl8187_tx_cb(struct urb *urb)
115 {
116         struct ieee80211_tx_status status;
117         struct sk_buff *skb = (struct sk_buff *)urb->context;
118         struct rtl8187_tx_info *info = (struct rtl8187_tx_info *)skb->cb;
119
120         memset(&status, 0, sizeof(status));
121
122         usb_free_urb(info->urb);
123         if (info->control)
124                 memcpy(&status.control, info->control, sizeof(status.control));
125         kfree(info->control);
126         skb_pull(skb, sizeof(struct rtl8187_tx_hdr));
127         status.flags |= IEEE80211_TX_STATUS_ACK;
128         ieee80211_tx_status_irqsafe(info->dev, skb, &status);
129 }
130
131 static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb,
132                       struct ieee80211_tx_control *control)
133 {
134         struct rtl8187_priv *priv = dev->priv;
135         struct rtl8187_tx_hdr *hdr;
136         struct rtl8187_tx_info *info;
137         struct urb *urb;
138         __le16 rts_dur = 0;
139         u32 flags;
140
141         urb = usb_alloc_urb(0, GFP_ATOMIC);
142         if (!urb) {
143                 kfree_skb(skb);
144                 return 0;
145         }
146
147         flags = skb->len;
148         flags |= RTL8187_TX_FLAG_NO_ENCRYPT;
149         flags |= control->rts_cts_rate << 19;
150         flags |= control->tx_rate << 24;
151         if (ieee80211_get_morefrag((struct ieee80211_hdr *)skb->data))
152                 flags |= RTL8187_TX_FLAG_MORE_FRAG;
153         if (control->flags & IEEE80211_TXCTL_USE_RTS_CTS) {
154                 flags |= RTL8187_TX_FLAG_RTS;
155                 rts_dur = ieee80211_rts_duration(dev, priv->vif,
156                                                  skb->len, control);
157         }
158         if (control->flags & IEEE80211_TXCTL_USE_CTS_PROTECT)
159                 flags |= RTL8187_TX_FLAG_CTS;
160
161         hdr = (struct rtl8187_tx_hdr *)skb_push(skb, sizeof(*hdr));
162         hdr->flags = cpu_to_le32(flags);
163         hdr->len = 0;
164         hdr->rts_duration = rts_dur;
165         hdr->retry = cpu_to_le32(control->retry_limit << 8);
166
167         info = (struct rtl8187_tx_info *)skb->cb;
168         info->control = kmemdup(control, sizeof(*control), GFP_ATOMIC);
169         info->urb = urb;
170         info->dev = dev;
171         usb_fill_bulk_urb(urb, priv->udev, usb_sndbulkpipe(priv->udev, 2),
172                           hdr, skb->len, rtl8187_tx_cb, skb);
173         usb_submit_urb(urb, GFP_ATOMIC);
174
175         return 0;
176 }
177
178 static void rtl8187_rx_cb(struct urb *urb)
179 {
180         struct sk_buff *skb = (struct sk_buff *)urb->context;
181         struct rtl8187_rx_info *info = (struct rtl8187_rx_info *)skb->cb;
182         struct ieee80211_hw *dev = info->dev;
183         struct rtl8187_priv *priv = dev->priv;
184         struct rtl8187_rx_hdr *hdr;
185         struct ieee80211_rx_status rx_status = { 0 };
186         int rate, signal;
187         u32 flags;
188
189         spin_lock(&priv->rx_queue.lock);
190         if (skb->next)
191                 __skb_unlink(skb, &priv->rx_queue);
192         else {
193                 spin_unlock(&priv->rx_queue.lock);
194                 return;
195         }
196         spin_unlock(&priv->rx_queue.lock);
197
198         if (unlikely(urb->status)) {
199                 usb_free_urb(urb);
200                 dev_kfree_skb_irq(skb);
201                 return;
202         }
203
204         skb_put(skb, urb->actual_length);
205         hdr = (struct rtl8187_rx_hdr *)(skb_tail_pointer(skb) - sizeof(*hdr));
206         flags = le32_to_cpu(hdr->flags);
207         skb_trim(skb, flags & 0x0FFF);
208
209         signal = hdr->agc >> 1;
210         rate = (flags >> 20) & 0xF;
211         if (rate > 3) { /* OFDM rate */
212                 if (signal > 90)
213                         signal = 90;
214                 else if (signal < 25)
215                         signal = 25;
216                 signal = 90 - signal;
217         } else {        /* CCK rate */
218                 if (signal > 95)
219                         signal = 95;
220                 else if (signal < 30)
221                         signal = 30;
222                 signal = 95 - signal;
223         }
224
225         rx_status.antenna = (hdr->signal >> 7) & 1;
226         rx_status.signal = 64 - min(hdr->noise, (u8)64);
227         rx_status.ssi = signal;
228         rx_status.rate = rate;
229         rx_status.freq = dev->conf.freq;
230         rx_status.channel = dev->conf.channel;
231         rx_status.phymode = dev->conf.phymode;
232         rx_status.mactime = le64_to_cpu(hdr->mac_time);
233         rx_status.flag |= RX_FLAG_TSFT;
234         if (flags & (1 << 13))
235                 rx_status.flag |= RX_FLAG_FAILED_FCS_CRC;
236         ieee80211_rx_irqsafe(dev, skb, &rx_status);
237
238         skb = dev_alloc_skb(RTL8187_MAX_RX);
239         if (unlikely(!skb)) {
240                 usb_free_urb(urb);
241                 /* TODO check rx queue length and refill *somewhere* */
242                 return;
243         }
244
245         info = (struct rtl8187_rx_info *)skb->cb;
246         info->urb = urb;
247         info->dev = dev;
248         urb->transfer_buffer = skb_tail_pointer(skb);
249         urb->context = skb;
250         skb_queue_tail(&priv->rx_queue, skb);
251
252         usb_submit_urb(urb, GFP_ATOMIC);
253 }
254
255 static int rtl8187_init_urbs(struct ieee80211_hw *dev)
256 {
257         struct rtl8187_priv *priv = dev->priv;
258         struct urb *entry;
259         struct sk_buff *skb;
260         struct rtl8187_rx_info *info;
261
262         while (skb_queue_len(&priv->rx_queue) < 8) {
263                 skb = __dev_alloc_skb(RTL8187_MAX_RX, GFP_KERNEL);
264                 if (!skb)
265                         break;
266                 entry = usb_alloc_urb(0, GFP_KERNEL);
267                 if (!entry) {
268                         kfree_skb(skb);
269                         break;
270                 }
271                 usb_fill_bulk_urb(entry, priv->udev,
272                                   usb_rcvbulkpipe(priv->udev, 1),
273                                   skb_tail_pointer(skb),
274                                   RTL8187_MAX_RX, rtl8187_rx_cb, skb);
275                 info = (struct rtl8187_rx_info *)skb->cb;
276                 info->urb = entry;
277                 info->dev = dev;
278                 skb_queue_tail(&priv->rx_queue, skb);
279                 usb_submit_urb(entry, GFP_KERNEL);
280         }
281
282         return 0;
283 }
284
285 static int rtl8187_init_hw(struct ieee80211_hw *dev)
286 {
287         struct rtl8187_priv *priv = dev->priv;
288         u8 reg;
289         int i;
290
291         /* reset */
292         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
293         reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
294         rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
295         rtl818x_iowrite32(priv, &priv->map->ANAPARAM, RTL8225_ANAPARAM_ON);
296         rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, RTL8225_ANAPARAM2_ON);
297         rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
298         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
299
300         rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
301
302         msleep(200);
303         rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x10);
304         rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x11);
305         rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x00);
306         msleep(200);
307
308         reg = rtl818x_ioread8(priv, &priv->map->CMD);
309         reg &= (1 << 1);
310         reg |= RTL818X_CMD_RESET;
311         rtl818x_iowrite8(priv, &priv->map->CMD, reg);
312
313         i = 10;
314         do {
315                 msleep(2);
316                 if (!(rtl818x_ioread8(priv, &priv->map->CMD) &
317                       RTL818X_CMD_RESET))
318                         break;
319         } while (--i);
320
321         if (!i) {
322                 printk(KERN_ERR "%s: Reset timeout!\n", wiphy_name(dev->wiphy));
323                 return -ETIMEDOUT;
324         }
325
326         /* reload registers from eeprom */
327         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_LOAD);
328
329         i = 10;
330         do {
331                 msleep(4);
332                 if (!(rtl818x_ioread8(priv, &priv->map->EEPROM_CMD) &
333                       RTL818X_EEPROM_CMD_CONFIG))
334                         break;
335         } while (--i);
336
337         if (!i) {
338                 printk(KERN_ERR "%s: eeprom reset timeout!\n",
339                        wiphy_name(dev->wiphy));
340                 return -ETIMEDOUT;
341         }
342
343         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
344         reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
345         rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
346         rtl818x_iowrite32(priv, &priv->map->ANAPARAM, RTL8225_ANAPARAM_ON);
347         rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, RTL8225_ANAPARAM2_ON);
348         rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
349         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
350
351         /* setup card */
352         rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0);
353         rtl818x_iowrite8(priv, &priv->map->GPIO, 0);
354
355         rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, (4 << 8));
356         rtl818x_iowrite8(priv, &priv->map->GPIO, 1);
357         rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0);
358
359         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
360
361         rtl818x_iowrite16(priv, (__le16 *)0xFFF4, 0xFFFF);
362         reg = rtl818x_ioread8(priv, &priv->map->CONFIG1);
363         reg &= 0x3F;
364         reg |= 0x80;
365         rtl818x_iowrite8(priv, &priv->map->CONFIG1, reg);
366
367         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
368
369         rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0);
370         rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0);
371         rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, 0x81);
372
373         // TODO: set RESP_RATE and BRSR properly
374         rtl818x_iowrite8(priv, &priv->map->RESP_RATE, (8 << 4) | 0);
375         rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
376
377         /* host_usb_init */
378         rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0);
379         rtl818x_iowrite8(priv, &priv->map->GPIO, 0);
380         reg = rtl818x_ioread8(priv, (u8 *)0xFE53);
381         rtl818x_iowrite8(priv, (u8 *)0xFE53, reg | (1 << 7));
382         rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, (4 << 8));
383         rtl818x_iowrite8(priv, &priv->map->GPIO, 0x20);
384         rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0);
385         rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x80);
386         rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x80);
387         rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x80);
388         msleep(100);
389
390         rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x000a8008);
391         rtl818x_iowrite16(priv, &priv->map->BRSR, 0xFFFF);
392         rtl818x_iowrite32(priv, &priv->map->RF_PARA, 0x00100044);
393         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
394         rtl818x_iowrite8(priv, &priv->map->CONFIG3, 0x44);
395         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
396         rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FF7);
397         msleep(100);
398
399         priv->rf->init(dev);
400
401         rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
402         reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~1;
403         rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg | 1);
404         rtl818x_iowrite16(priv, (__le16 *)0xFFFE, 0x10);
405         rtl818x_iowrite8(priv, &priv->map->TALLY_SEL, 0x80);
406         rtl818x_iowrite8(priv, (u8 *)0xFFFF, 0x60);
407         rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
408
409         return 0;
410 }
411
412 static int rtl8187_start(struct ieee80211_hw *dev)
413 {
414         struct rtl8187_priv *priv = dev->priv;
415         u32 reg;
416         int ret;
417
418         ret = rtl8187_init_hw(dev);
419         if (ret)
420                 return ret;
421
422         rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF);
423
424         rtl818x_iowrite32(priv, &priv->map->MAR[0], ~0);
425         rtl818x_iowrite32(priv, &priv->map->MAR[1], ~0);
426
427         rtl8187_init_urbs(dev);
428
429         reg = RTL818X_RX_CONF_ONLYERLPKT |
430               RTL818X_RX_CONF_RX_AUTORESETPHY |
431               RTL818X_RX_CONF_BSSID |
432               RTL818X_RX_CONF_MGMT |
433               RTL818X_RX_CONF_DATA |
434               (7 << 13 /* RX FIFO threshold NONE */) |
435               (7 << 10 /* MAX RX DMA */) |
436               RTL818X_RX_CONF_BROADCAST |
437               RTL818X_RX_CONF_NICMAC;
438
439         priv->rx_conf = reg;
440         rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg);
441
442         reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
443         reg &= ~RTL818X_CW_CONF_PERPACKET_CW_SHIFT;
444         reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT;
445         rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg);
446
447         reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL);
448         reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT;
449         reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT;
450         reg &= ~RTL818X_TX_AGC_CTL_FEEDBACK_ANT;
451         rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg);
452
453         reg  = RTL818X_TX_CONF_CW_MIN |
454                (7 << 21 /* MAX TX DMA */) |
455                RTL818X_TX_CONF_NO_ICV;
456         rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg);
457
458         reg = rtl818x_ioread8(priv, &priv->map->CMD);
459         reg |= RTL818X_CMD_TX_ENABLE;
460         reg |= RTL818X_CMD_RX_ENABLE;
461         rtl818x_iowrite8(priv, &priv->map->CMD, reg);
462
463         return 0;
464 }
465
466 static void rtl8187_stop(struct ieee80211_hw *dev)
467 {
468         struct rtl8187_priv *priv = dev->priv;
469         struct rtl8187_rx_info *info;
470         struct sk_buff *skb;
471         u32 reg;
472
473         rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
474
475         reg = rtl818x_ioread8(priv, &priv->map->CMD);
476         reg &= ~RTL818X_CMD_TX_ENABLE;
477         reg &= ~RTL818X_CMD_RX_ENABLE;
478         rtl818x_iowrite8(priv, &priv->map->CMD, reg);
479
480         priv->rf->stop(dev);
481
482         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
483         reg = rtl818x_ioread8(priv, &priv->map->CONFIG4);
484         rtl818x_iowrite8(priv, &priv->map->CONFIG4, reg | RTL818X_CONFIG4_VCOOFF);
485         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
486
487         while ((skb = skb_dequeue(&priv->rx_queue))) {
488                 info = (struct rtl8187_rx_info *)skb->cb;
489                 usb_kill_urb(info->urb);
490                 kfree_skb(skb);
491         }
492         return;
493 }
494
495 static int rtl8187_add_interface(struct ieee80211_hw *dev,
496                                  struct ieee80211_if_init_conf *conf)
497 {
498         struct rtl8187_priv *priv = dev->priv;
499         int i;
500
501         if (priv->mode != IEEE80211_IF_TYPE_MNTR)
502                 return -EOPNOTSUPP;
503
504         switch (conf->type) {
505         case IEEE80211_IF_TYPE_STA:
506                 priv->mode = conf->type;
507                 break;
508         default:
509                 return -EOPNOTSUPP;
510         }
511
512         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
513         for (i = 0; i < ETH_ALEN; i++)
514                 rtl818x_iowrite8(priv, &priv->map->MAC[i],
515                                  ((u8 *)conf->mac_addr)[i]);
516         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
517
518         return 0;
519 }
520
521 static void rtl8187_remove_interface(struct ieee80211_hw *dev,
522                                      struct ieee80211_if_init_conf *conf)
523 {
524         struct rtl8187_priv *priv = dev->priv;
525         priv->mode = IEEE80211_IF_TYPE_MNTR;
526 }
527
528 static int rtl8187_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf)
529 {
530         struct rtl8187_priv *priv = dev->priv;
531         u32 reg;
532
533         reg = rtl818x_ioread32(priv, &priv->map->TX_CONF);
534         /* Enable TX loopback on MAC level to avoid TX during channel
535          * changes, as this has be seen to causes problems and the
536          * card will stop work until next reset
537          */
538         rtl818x_iowrite32(priv, &priv->map->TX_CONF,
539                           reg | RTL818X_TX_CONF_LOOPBACK_MAC);
540         msleep(10);
541         priv->rf->set_chan(dev, conf);
542         msleep(10);
543         rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg);
544
545         rtl818x_iowrite8(priv, &priv->map->SIFS, 0x22);
546
547         if (conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME) {
548                 rtl818x_iowrite8(priv, &priv->map->SLOT, 0x9);
549                 rtl818x_iowrite8(priv, &priv->map->DIFS, 0x14);
550                 rtl818x_iowrite8(priv, &priv->map->EIFS, 91 - 0x14);
551                 rtl818x_iowrite8(priv, &priv->map->CW_VAL, 0x73);
552         } else {
553                 rtl818x_iowrite8(priv, &priv->map->SLOT, 0x14);
554                 rtl818x_iowrite8(priv, &priv->map->DIFS, 0x24);
555                 rtl818x_iowrite8(priv, &priv->map->EIFS, 91 - 0x24);
556                 rtl818x_iowrite8(priv, &priv->map->CW_VAL, 0xa5);
557         }
558
559         rtl818x_iowrite16(priv, &priv->map->ATIM_WND, 2);
560         rtl818x_iowrite16(priv, &priv->map->ATIMTR_INTERVAL, 100);
561         rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL, 100);
562         rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL_TIME, 100);
563         return 0;
564 }
565
566 static int rtl8187_config_interface(struct ieee80211_hw *dev,
567                                     struct ieee80211_vif *vif,
568                                     struct ieee80211_if_conf *conf)
569 {
570         struct rtl8187_priv *priv = dev->priv;
571         int i;
572
573         for (i = 0; i < ETH_ALEN; i++)
574                 rtl818x_iowrite8(priv, &priv->map->BSSID[i], conf->bssid[i]);
575
576         if (is_valid_ether_addr(conf->bssid))
577                 rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_INFRA);
578         else
579                 rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_NO_LINK);
580
581         return 0;
582 }
583
584 static void rtl8187_configure_filter(struct ieee80211_hw *dev,
585                                      unsigned int changed_flags,
586                                      unsigned int *total_flags,
587                                      int mc_count, struct dev_addr_list *mclist)
588 {
589         struct rtl8187_priv *priv = dev->priv;
590
591         if (changed_flags & FIF_FCSFAIL)
592                 priv->rx_conf ^= RTL818X_RX_CONF_FCS;
593         if (changed_flags & FIF_CONTROL)
594                 priv->rx_conf ^= RTL818X_RX_CONF_CTRL;
595         if (changed_flags & FIF_OTHER_BSS)
596                 priv->rx_conf ^= RTL818X_RX_CONF_MONITOR;
597         if (*total_flags & FIF_ALLMULTI || mc_count > 0)
598                 priv->rx_conf |= RTL818X_RX_CONF_MULTICAST;
599         else
600                 priv->rx_conf &= ~RTL818X_RX_CONF_MULTICAST;
601
602         *total_flags = 0;
603
604         if (priv->rx_conf & RTL818X_RX_CONF_FCS)
605                 *total_flags |= FIF_FCSFAIL;
606         if (priv->rx_conf & RTL818X_RX_CONF_CTRL)
607                 *total_flags |= FIF_CONTROL;
608         if (priv->rx_conf & RTL818X_RX_CONF_MONITOR)
609                 *total_flags |= FIF_OTHER_BSS;
610         if (priv->rx_conf & RTL818X_RX_CONF_MULTICAST)
611                 *total_flags |= FIF_ALLMULTI;
612
613         rtl818x_iowrite32_async(priv, &priv->map->RX_CONF, priv->rx_conf);
614 }
615
616 static const struct ieee80211_ops rtl8187_ops = {
617         .tx                     = rtl8187_tx,
618         .start                  = rtl8187_start,
619         .stop                   = rtl8187_stop,
620         .add_interface          = rtl8187_add_interface,
621         .remove_interface       = rtl8187_remove_interface,
622         .config                 = rtl8187_config,
623         .config_interface       = rtl8187_config_interface,
624         .configure_filter       = rtl8187_configure_filter,
625 };
626
627 static void rtl8187_eeprom_register_read(struct eeprom_93cx6 *eeprom)
628 {
629         struct ieee80211_hw *dev = eeprom->data;
630         struct rtl8187_priv *priv = dev->priv;
631         u8 reg = rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
632
633         eeprom->reg_data_in = reg & RTL818X_EEPROM_CMD_WRITE;
634         eeprom->reg_data_out = reg & RTL818X_EEPROM_CMD_READ;
635         eeprom->reg_data_clock = reg & RTL818X_EEPROM_CMD_CK;
636         eeprom->reg_chip_select = reg & RTL818X_EEPROM_CMD_CS;
637 }
638
639 static void rtl8187_eeprom_register_write(struct eeprom_93cx6 *eeprom)
640 {
641         struct ieee80211_hw *dev = eeprom->data;
642         struct rtl8187_priv *priv = dev->priv;
643         u8 reg = RTL818X_EEPROM_CMD_PROGRAM;
644
645         if (eeprom->reg_data_in)
646                 reg |= RTL818X_EEPROM_CMD_WRITE;
647         if (eeprom->reg_data_out)
648                 reg |= RTL818X_EEPROM_CMD_READ;
649         if (eeprom->reg_data_clock)
650                 reg |= RTL818X_EEPROM_CMD_CK;
651         if (eeprom->reg_chip_select)
652                 reg |= RTL818X_EEPROM_CMD_CS;
653
654         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, reg);
655         udelay(10);
656 }
657
658 static int __devinit rtl8187_probe(struct usb_interface *intf,
659                                    const struct usb_device_id *id)
660 {
661         struct usb_device *udev = interface_to_usbdev(intf);
662         struct ieee80211_hw *dev;
663         struct rtl8187_priv *priv;
664         struct eeprom_93cx6 eeprom;
665         struct ieee80211_channel *channel;
666         u16 txpwr, reg;
667         int err, i;
668         DECLARE_MAC_BUF(mac);
669
670         dev = ieee80211_alloc_hw(sizeof(*priv), &rtl8187_ops);
671         if (!dev) {
672                 printk(KERN_ERR "rtl8187: ieee80211 alloc failed\n");
673                 return -ENOMEM;
674         }
675
676         priv = dev->priv;
677
678         SET_IEEE80211_DEV(dev, &intf->dev);
679         usb_set_intfdata(intf, dev);
680         priv->udev = udev;
681
682         usb_get_dev(udev);
683
684         skb_queue_head_init(&priv->rx_queue);
685         memcpy(priv->channels, rtl818x_channels, sizeof(rtl818x_channels));
686         memcpy(priv->rates, rtl818x_rates, sizeof(rtl818x_rates));
687         priv->map = (struct rtl818x_csr *)0xFF00;
688         priv->modes[0].mode = MODE_IEEE80211G;
689         priv->modes[0].num_rates = ARRAY_SIZE(rtl818x_rates);
690         priv->modes[0].rates = priv->rates;
691         priv->modes[0].num_channels = ARRAY_SIZE(rtl818x_channels);
692         priv->modes[0].channels = priv->channels;
693         priv->modes[1].mode = MODE_IEEE80211B;
694         priv->modes[1].num_rates = 4;
695         priv->modes[1].rates = priv->rates;
696         priv->modes[1].num_channels = ARRAY_SIZE(rtl818x_channels);
697         priv->modes[1].channels = priv->channels;
698         priv->mode = IEEE80211_IF_TYPE_MNTR;
699         dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
700                      IEEE80211_HW_RX_INCLUDES_FCS;
701         dev->extra_tx_headroom = sizeof(struct rtl8187_tx_hdr);
702         dev->queues = 1;
703         dev->max_rssi = 65;
704         dev->max_signal = 64;
705
706         for (i = 0; i < 2; i++)
707                 if ((err = ieee80211_register_hwmode(dev, &priv->modes[i])))
708                         goto err_free_dev;
709
710         eeprom.data = dev;
711         eeprom.register_read = rtl8187_eeprom_register_read;
712         eeprom.register_write = rtl8187_eeprom_register_write;
713         if (rtl818x_ioread32(priv, &priv->map->RX_CONF) & (1 << 6))
714                 eeprom.width = PCI_EEPROM_WIDTH_93C66;
715         else
716                 eeprom.width = PCI_EEPROM_WIDTH_93C46;
717
718         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
719         udelay(10);
720
721         eeprom_93cx6_multiread(&eeprom, RTL8187_EEPROM_MAC_ADDR,
722                                (__le16 __force *)dev->wiphy->perm_addr, 3);
723         if (!is_valid_ether_addr(dev->wiphy->perm_addr)) {
724                 printk(KERN_WARNING "rtl8187: Invalid hwaddr! Using randomly "
725                        "generated MAC address\n");
726                 random_ether_addr(dev->wiphy->perm_addr);
727         }
728
729         channel = priv->channels;
730         for (i = 0; i < 3; i++) {
731                 eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_1 + i,
732                                   &txpwr);
733                 (*channel++).val = txpwr & 0xFF;
734                 (*channel++).val = txpwr >> 8;
735         }
736         for (i = 0; i < 2; i++) {
737                 eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_4 + i,
738                                   &txpwr);
739                 (*channel++).val = txpwr & 0xFF;
740                 (*channel++).val = txpwr >> 8;
741         }
742         for (i = 0; i < 2; i++) {
743                 eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_6 + i,
744                                   &txpwr);
745                 (*channel++).val = txpwr & 0xFF;
746                 (*channel++).val = txpwr >> 8;
747         }
748
749         eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_BASE,
750                           &priv->txpwr_base);
751
752         reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~1;
753         rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg | 1);
754         /* 0 means asic B-cut, we should use SW 3 wire
755          * bit-by-bit banging for radio. 1 means we can use
756          * USB specific request to write radio registers */
757         priv->asic_rev = rtl818x_ioread8(priv, (u8 *)0xFFFE) & 0x3;
758         rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
759         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
760
761         priv->rf = rtl8187_detect_rf(dev);
762
763         err = ieee80211_register_hw(dev);
764         if (err) {
765                 printk(KERN_ERR "rtl8187: Cannot register device\n");
766                 goto err_free_dev;
767         }
768
769         printk(KERN_INFO "%s: hwaddr %s, rtl8187 V%d + %s\n",
770                wiphy_name(dev->wiphy), print_mac(mac, dev->wiphy->perm_addr),
771                priv->asic_rev, priv->rf->name);
772
773         return 0;
774
775  err_free_dev:
776         ieee80211_free_hw(dev);
777         usb_set_intfdata(intf, NULL);
778         usb_put_dev(udev);
779         return err;
780 }
781
782 static void __devexit rtl8187_disconnect(struct usb_interface *intf)
783 {
784         struct ieee80211_hw *dev = usb_get_intfdata(intf);
785         struct rtl8187_priv *priv;
786
787         if (!dev)
788                 return;
789
790         ieee80211_unregister_hw(dev);
791
792         priv = dev->priv;
793         usb_put_dev(interface_to_usbdev(intf));
794         ieee80211_free_hw(dev);
795 }
796
797 static struct usb_driver rtl8187_driver = {
798         .name           = KBUILD_MODNAME,
799         .id_table       = rtl8187_table,
800         .probe          = rtl8187_probe,
801         .disconnect     = rtl8187_disconnect,
802 };
803
804 static int __init rtl8187_init(void)
805 {
806         return usb_register(&rtl8187_driver);
807 }
808
809 static void __exit rtl8187_exit(void)
810 {
811         usb_deregister(&rtl8187_driver);
812 }
813
814 module_init(rtl8187_init);
815 module_exit(rtl8187_exit);