git.oblomov.eu Git - linux-2.6/blob - drivers/net/phy/phy_device.c

   1 /*
   2  * drivers/net/phy/phy_device.c
   3  *
   4  * Framework for finding and configuring PHYs.
   5  * Also contains generic PHY driver
   6  *
   7  * Author: Andy Fleming
   8  *
   9  * Copyright (c) 2004 Freescale Semiconductor, Inc.
  10  *
  11  * This program is free software; you can redistribute  it and/or modify it
  12  * under  the terms of  the GNU General  Public License as published by the
  13  * Free Software Foundation;  either version 2 of the  License, or (at your
  14  * option) any later version.
  15  *
  16  */
  17 #include <linux/kernel.h>
  18 #include <linux/sched.h>
  19 #include <linux/string.h>
  20 #include <linux/errno.h>
  21 #include <linux/unistd.h>
  22 #include <linux/slab.h>
  23 #include <linux/interrupt.h>
  24 #include <linux/init.h>
  25 #include <linux/delay.h>
  26 #include <linux/netdevice.h>
  27 #include <linux/etherdevice.h>
  28 #include <linux/skbuff.h>
  29 #include <linux/spinlock.h>
  30 #include <linux/mm.h>
  31 #include <linux/module.h>
  32 #include <linux/mii.h>
  33 #include <linux/ethtool.h>
  34 #include <linux/phy.h>
  35
  36 #include <asm/io.h>
  37 #include <asm/irq.h>
  38 #include <asm/uaccess.h>
  39
  40 MODULE_DESCRIPTION("PHY library");
  41 MODULE_AUTHOR("Andy Fleming");
  42 MODULE_LICENSE("GPL");
  43
  44 static struct phy_driver genphy_driver;
  45 extern int mdio_bus_init(void);
  46 extern void mdio_bus_exit(void);
  47
  48 /* get_phy_device
  49  *
  50  * description: Reads the ID registers of the PHY at addr on the
  51  *   bus, then allocates and returns the phy_device to
  52  *   represent it.
  53  */
  54 struct phy_device * get_phy_device(struct mii_bus *bus, int addr)
  55 {
  56         int phy_reg;
  57         u32 phy_id;
  58         struct phy_device *dev = NULL;
  59
  60         /* Grab the bits from PHYIR1, and put them
  61          * in the upper half */
  62         phy_reg = bus->read(bus, addr, MII_PHYSID1);
  63
  64         if (phy_reg < 0)
  65                 return ERR_PTR(phy_reg);
  66
  67         phy_id = (phy_reg & 0xffff) << 16;
  68
  69         /* Grab the bits from PHYIR2, and put them in the lower half */
  70         phy_reg = bus->read(bus, addr, MII_PHYSID2);
  71
  72         if (phy_reg < 0)
  73                 return ERR_PTR(phy_reg);
  74
  75         phy_id |= (phy_reg & 0xffff);
  76
  77         /* If the phy_id is all Fs, there is no device there */
  78         if (0xffffffff == phy_id)
  79                 return NULL;
  80
  81         /* Otherwise, we allocate the device, and initialize the
  82          * default values */
  83         dev = kcalloc(1, sizeof(*dev), GFP_KERNEL);
  84
  85         if (NULL == dev)
  86                 return ERR_PTR(-ENOMEM);
  87
  88         dev->speed = 0;
  89         dev->duplex = -1;
  90         dev->pause = dev->asym_pause = 0;
  91         dev->link = 1;
  92
  93         dev->autoneg = AUTONEG_ENABLE;
  94
  95         dev->addr = addr;
  96         dev->phy_id = phy_id;
  97         dev->bus = bus;
  98
  99         dev->state = PHY_DOWN;
 100
 101         spin_lock_init(&dev->lock);
 102
 103         return dev;
 104 }
 105
 106 /* phy_prepare_link:
 107  *
 108  * description: Tells the PHY infrastructure to handle the
 109  *   gory details on monitoring link status (whether through
 110  *   polling or an interrupt), and to call back to the
 111  *   connected device driver when the link status changes.
 112  *   If you want to monitor your own link state, don't call
 113  *   this function */
 114 void phy_prepare_link(struct phy_device *phydev,
 115                 void (*handler)(struct net_device *))
 116 {
 117         phydev->adjust_link = handler;
 118 }
 119
 120 /* phy_connect:
 121  *
 122  * description: Convenience function for connecting ethernet
 123  *   devices to PHY devices.  The default behavior is for
 124  *   the PHY infrastructure to handle everything, and only notify
 125  *   the connected driver when the link status changes.  If you
 126  *   don't want, or can't use the provided functionality, you may
 127  *   choose to call only the subset of functions which provide
 128  *   the desired functionality.
 129  */
 130 struct phy_device * phy_connect(struct net_device *dev, const char *phy_id,
 131                 void (*handler)(struct net_device *), u32 flags)
 132 {
 133         struct phy_device *phydev;
 134
 135         phydev = phy_attach(dev, phy_id, flags);
 136
 137         if (IS_ERR(phydev))
 138                 return phydev;
 139
 140         phy_prepare_link(phydev, handler);
 141
 142         phy_start_machine(phydev, NULL);
 143
 144         if (phydev->irq > 0)
 145                 phy_start_interrupts(phydev);
 146
 147         return phydev;
 148 }
 149 EXPORT_SYMBOL(phy_connect);
 150
 151 void phy_disconnect(struct phy_device *phydev)
 152 {
 153         if (phydev->irq > 0)
 154                 phy_stop_interrupts(phydev);
 155
 156         phy_stop_machine(phydev);
 157
 158         phydev->adjust_link = NULL;
 159
 160         phy_detach(phydev);
 161 }
 162 EXPORT_SYMBOL(phy_disconnect);
 163
 164 /* phy_attach:
 165  *
 166  *   description: Called by drivers to attach to a particular PHY
 167  *     device. The phy_device is found, and properly hooked up
 168  *     to the phy_driver.  If no driver is attached, then the
 169  *     genphy_driver is used.  The phy_device is given a ptr to
 170  *     the attaching device, and given a callback for link status
 171  *     change.  The phy_device is returned to the attaching
 172  *     driver.
 173  */
 174 static int phy_compare_id(struct device *dev, void *data)
 175 {
 176         return strcmp((char *)data, dev->bus_id) ? 0 : 1;
 177 }
 178
 179 struct phy_device *phy_attach(struct net_device *dev,
 180                 const char *phy_id, u32 flags)
 181 {
 182         struct bus_type *bus = &mdio_bus_type;
 183         struct phy_device *phydev;
 184         struct device *d;
 185
 186         /* Search the list of PHY devices on the mdio bus for the
 187          * PHY with the requested name */
 188         d = bus_find_device(bus, NULL, (void *)phy_id, phy_compare_id);
 189
 190         if (d) {
 191                 phydev = to_phy_device(d);
 192         } else {
 193                 printk(KERN_ERR "%s not found\n", phy_id);
 194                 return ERR_PTR(-ENODEV);
 195         }
 196
 197         /* Assume that if there is no driver, that it doesn't
 198          * exist, and we should use the genphy driver. */
 199         if (NULL == d->driver) {
 200                 int err;
 201                 down_write(&d->bus->subsys.rwsem);
 202                 d->driver = &genphy_driver.driver;
 203
 204                 err = d->driver->probe(d);
 205
 206                 if (err < 0)
 207                         return ERR_PTR(err);
 208
 209                 device_bind_driver(d);
 210                 up_write(&d->bus->subsys.rwsem);
 211         }
 212
 213         if (phydev->attached_dev) {
 214                 printk(KERN_ERR "%s: %s already attached\n",
 215                                 dev->name, phy_id);
 216                 return ERR_PTR(-EBUSY);
 217         }
 218
 219         phydev->attached_dev = dev;
 220
 221         phydev->dev_flags = flags;
 222
 223         return phydev;
 224 }
 225 EXPORT_SYMBOL(phy_attach);
 226
 227 void phy_detach(struct phy_device *phydev)
 228 {
 229         phydev->attached_dev = NULL;
 230
 231         /* If the device had no specific driver before (i.e. - it
 232          * was using the generic driver), we unbind the device
 233          * from the generic driver so that there's a chance a
 234          * real driver could be loaded */
 235         if (phydev->dev.driver == &genphy_driver.driver) {
 236                 down_write(&phydev->dev.bus->subsys.rwsem);
 237                 device_release_driver(&phydev->dev);
 238                 up_write(&phydev->dev.bus->subsys.rwsem);
 239         }
 240 }
 241 EXPORT_SYMBOL(phy_detach);
 242
 243
 244 /* Generic PHY support and helper functions */
 245
 246 /* genphy_config_advert
 247  *
 248  * description: Writes MII_ADVERTISE with the appropriate values,
 249  *   after sanitizing the values to make sure we only advertise
 250  *   what is supported
 251  */
 252 int genphy_config_advert(struct phy_device *phydev)
 253 {
 254         u32 advertise;
 255         int adv;
 256         int err;
 257
 258         /* Only allow advertising what
 259          * this PHY supports */
 260         phydev->advertising &= phydev->supported;
 261         advertise = phydev->advertising;
 262
 263         /* Setup standard advertisement */
 264         adv = phy_read(phydev, MII_ADVERTISE);
 265
 266         if (adv < 0)
 267                 return adv;
 268
 269         adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP |
 270                  ADVERTISE_PAUSE_ASYM);
 271         if (advertise & ADVERTISED_10baseT_Half)
 272                 adv |= ADVERTISE_10HALF;
 273         if (advertise & ADVERTISED_10baseT_Full)
 274                 adv |= ADVERTISE_10FULL;
 275         if (advertise & ADVERTISED_100baseT_Half)
 276                 adv |= ADVERTISE_100HALF;
 277         if (advertise & ADVERTISED_100baseT_Full)
 278                 adv |= ADVERTISE_100FULL;
 279         if (advertise & ADVERTISED_Pause)
 280                 adv |= ADVERTISE_PAUSE_CAP;
 281         if (advertise & ADVERTISED_Asym_Pause)
 282                 adv |= ADVERTISE_PAUSE_ASYM;
 283
 284         err = phy_write(phydev, MII_ADVERTISE, adv);
 285
 286         if (err < 0)
 287                 return err;
 288
 289         /* Configure gigabit if it's supported */
 290         if (phydev->supported & (SUPPORTED_1000baseT_Half |
 291                                 SUPPORTED_1000baseT_Full)) {
 292                 adv = phy_read(phydev, MII_CTRL1000);
 293
 294                 if (adv < 0)
 295                         return adv;
 296
 297                 adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
 298                 if (advertise & SUPPORTED_1000baseT_Half)
 299                         adv |= ADVERTISE_1000HALF;
 300                 if (advertise & SUPPORTED_1000baseT_Full)
 301                         adv |= ADVERTISE_1000FULL;
 302                 err = phy_write(phydev, MII_CTRL1000, adv);
 303
 304                 if (err < 0)
 305                         return err;
 306         }
 307
 308         return adv;
 309 }
 310 EXPORT_SYMBOL(genphy_config_advert);
 311
 312 /* genphy_setup_forced
 313  *
 314  * description: Configures MII_BMCR to force speed/duplex
 315  *   to the values in phydev. Assumes that the values are valid.
 316  *   Please see phy_sanitize_settings() */
 317 int genphy_setup_forced(struct phy_device *phydev)
 318 {
 319         int ctl = BMCR_RESET;
 320
 321         phydev->pause = phydev->asym_pause = 0;
 322
 323         if (SPEED_1000 == phydev->speed)
 324                 ctl |= BMCR_SPEED1000;
 325         else if (SPEED_100 == phydev->speed)
 326                 ctl |= BMCR_SPEED100;
 327
 328         if (DUPLEX_FULL == phydev->duplex)
 329                 ctl |= BMCR_FULLDPLX;
 330
 331         ctl = phy_write(phydev, MII_BMCR, ctl);
 332
 333         if (ctl < 0)
 334                 return ctl;
 335
 336         /* We just reset the device, so we'd better configure any
 337          * settings the PHY requires to operate */
 338         if (phydev->drv->config_init)
 339                 ctl = phydev->drv->config_init(phydev);
 340
 341         return ctl;
 342 }
 343
 344
 345 /* Enable and Restart Autonegotiation */
 346 int genphy_restart_aneg(struct phy_device *phydev)
 347 {
 348         int ctl;
 349
 350         ctl = phy_read(phydev, MII_BMCR);
 351
 352         if (ctl < 0)
 353                 return ctl;
 354
 355         ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
 356
 357         /* Don't isolate the PHY if we're negotiating */
 358         ctl &= ~(BMCR_ISOLATE);
 359
 360         ctl = phy_write(phydev, MII_BMCR, ctl);
 361
 362         return ctl;
 363 }
 364
 365
 366 /* genphy_config_aneg
 367  *
 368  * description: If auto-negotiation is enabled, we configure the
 369  *   advertising, and then restart auto-negotiation.  If it is not
 370  *   enabled, then we write the BMCR
 371  */
 372 int genphy_config_aneg(struct phy_device *phydev)
 373 {
 374         int err = 0;
 375
 376         if (AUTONEG_ENABLE == phydev->autoneg) {
 377                 err = genphy_config_advert(phydev);
 378
 379                 if (err < 0)
 380                         return err;
 381
 382                 err = genphy_restart_aneg(phydev);
 383         } else
 384                 err = genphy_setup_forced(phydev);
 385
 386         return err;
 387 }
 388 EXPORT_SYMBOL(genphy_config_aneg);
 389
 390 /* genphy_update_link
 391  *
 392  * description: Update the value in phydev->link to reflect the
 393  *   current link value.  In order to do this, we need to read
 394  *   the status register twice, keeping the second value
 395  */
 396 int genphy_update_link(struct phy_device *phydev)
 397 {
 398         int status;
 399
 400         /* Do a fake read */
 401         status = phy_read(phydev, MII_BMSR);
 402
 403         if (status < 0)
 404                 return status;
 405
 406         /* Read link and autonegotiation status */
 407         status = phy_read(phydev, MII_BMSR);
 408
 409         if (status < 0)
 410                 return status;
 411
 412         if ((status & BMSR_LSTATUS) == 0)
 413                 phydev->link = 0;
 414         else
 415                 phydev->link = 1;
 416
 417         return 0;
 418 }
 419
 420 /* genphy_read_status
 421  *
 422  * description: Check the link, then figure out the current state
 423  *   by comparing what we advertise with what the link partner
 424  *   advertises.  Start by checking the gigabit possibilities,
 425  *   then move on to 10/100.
 426  */
 427 int genphy_read_status(struct phy_device *phydev)
 428 {
 429         int adv;
 430         int err;
 431         int lpa;
 432         int lpagb = 0;
 433
 434         /* Update the link, but return if there
 435          * was an error */
 436         err = genphy_update_link(phydev);
 437         if (err)
 438                 return err;
 439
 440         if (AUTONEG_ENABLE == phydev->autoneg) {
 441                 if (phydev->supported & (SUPPORTED_1000baseT_Half
 442                                         | SUPPORTED_1000baseT_Full)) {
 443                         lpagb = phy_read(phydev, MII_STAT1000);
 444
 445                         if (lpagb < 0)
 446                                 return lpagb;
 447
 448                         adv = phy_read(phydev, MII_CTRL1000);
 449
 450                         if (adv < 0)
 451                                 return adv;
 452
 453                         lpagb &= adv << 2;
 454                 }
 455
 456                 lpa = phy_read(phydev, MII_LPA);
 457
 458                 if (lpa < 0)
 459                         return lpa;
 460
 461                 adv = phy_read(phydev, MII_ADVERTISE);
 462
 463                 if (adv < 0)
 464                         return adv;
 465
 466                 lpa &= adv;
 467
 468                 phydev->speed = SPEED_10;
 469                 phydev->duplex = DUPLEX_HALF;
 470                 phydev->pause = phydev->asym_pause = 0;
 471
 472                 if (lpagb & (LPA_1000FULL | LPA_1000HALF)) {
 473                         phydev->speed = SPEED_1000;
 474
 475                         if (lpagb & LPA_1000FULL)
 476                                 phydev->duplex = DUPLEX_FULL;
 477                 } else if (lpa & (LPA_100FULL | LPA_100HALF)) {
 478                         phydev->speed = SPEED_100;
 479
 480                         if (lpa & LPA_100FULL)
 481                                 phydev->duplex = DUPLEX_FULL;
 482                 } else
 483                         if (lpa & LPA_10FULL)
 484                                 phydev->duplex = DUPLEX_FULL;
 485
 486                 if (phydev->duplex == DUPLEX_FULL){
 487                         phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
 488                         phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
 489                 }
 490         } else {
 491                 int bmcr = phy_read(phydev, MII_BMCR);
 492                 if (bmcr < 0)
 493                         return bmcr;
 494
 495                 if (bmcr & BMCR_FULLDPLX)
 496                         phydev->duplex = DUPLEX_FULL;
 497                 else
 498                         phydev->duplex = DUPLEX_HALF;
 499
 500                 if (bmcr & BMCR_SPEED1000)
 501                         phydev->speed = SPEED_1000;
 502                 else if (bmcr & BMCR_SPEED100)
 503                         phydev->speed = SPEED_100;
 504                 else
 505                         phydev->speed = SPEED_10;
 506
 507                 phydev->pause = phydev->asym_pause = 0;
 508         }
 509
 510         return 0;
 511 }
 512 EXPORT_SYMBOL(genphy_read_status);
 513
 514 static int genphy_config_init(struct phy_device *phydev)
 515 {
 516         u32 val;
 517         u32 features;
 518
 519         /* For now, I'll claim that the generic driver supports
 520          * all possible port types */
 521         features = (SUPPORTED_TP | SUPPORTED_MII
 522                         | SUPPORTED_AUI | SUPPORTED_FIBRE |
 523                         SUPPORTED_BNC);
 524
 525         /* Do we support autonegotiation? */
 526         val = phy_read(phydev, MII_BMSR);
 527
 528         if (val < 0)
 529                 return val;
 530
 531         if (val & BMSR_ANEGCAPABLE)
 532                 features |= SUPPORTED_Autoneg;
 533
 534         if (val & BMSR_100FULL)
 535                 features |= SUPPORTED_100baseT_Full;
 536         if (val & BMSR_100HALF)
 537                 features |= SUPPORTED_100baseT_Half;
 538         if (val & BMSR_10FULL)
 539                 features |= SUPPORTED_10baseT_Full;
 540         if (val & BMSR_10HALF)
 541                 features |= SUPPORTED_10baseT_Half;
 542
 543         if (val & BMSR_ESTATEN) {
 544                 val = phy_read(phydev, MII_ESTATUS);
 545
 546                 if (val < 0)
 547                         return val;
 548
 549                 if (val & ESTATUS_1000_TFULL)
 550                         features |= SUPPORTED_1000baseT_Full;
 551                 if (val & ESTATUS_1000_THALF)
 552                         features |= SUPPORTED_1000baseT_Half;
 553         }
 554
 555         phydev->supported = features;
 556         phydev->advertising = features;
 557
 558         return 0;
 559 }
 560
 561
 562 /* phy_probe
 563  *
 564  * description: Take care of setting up the phy_device structure,
 565  *   set the state to READY (the driver's init function should
 566  *   set it to STARTING if needed).
 567  */
 568 static int phy_probe(struct device *dev)
 569 {
 570         struct phy_device *phydev;
 571         struct phy_driver *phydrv;
 572         struct device_driver *drv;
 573         int err = 0;
 574
 575         phydev = to_phy_device(dev);
 576
 577         /* Make sure the driver is held.
 578          * XXX -- Is this correct? */
 579         drv = get_driver(phydev->dev.driver);
 580         phydrv = to_phy_driver(drv);
 581         phydev->drv = phydrv;
 582
 583         /* Disable the interrupt if the PHY doesn't support it */
 584         if (!(phydrv->flags & PHY_HAS_INTERRUPT))
 585                 phydev->irq = PHY_POLL;
 586
 587         spin_lock(&phydev->lock);
 588
 589         /* Start out supporting everything. Eventually,
 590          * a controller will attach, and may modify one
 591          * or both of these values */
 592         phydev->supported = phydrv->features;
 593         phydev->advertising = phydrv->features;
 594
 595         /* Set the state to READY by default */
 596         phydev->state = PHY_READY;
 597
 598         if (phydev->drv->probe)
 599                 err = phydev->drv->probe(phydev);
 600
 601         spin_unlock(&phydev->lock);
 602
 603         if (err < 0)
 604                 return err;
 605
 606         if (phydev->drv->config_init)
 607                 err = phydev->drv->config_init(phydev);
 608
 609         return err;
 610 }
 611
 612 static int phy_remove(struct device *dev)
 613 {
 614         struct phy_device *phydev;
 615
 616         phydev = to_phy_device(dev);
 617
 618         spin_lock(&phydev->lock);
 619         phydev->state = PHY_DOWN;
 620         spin_unlock(&phydev->lock);
 621
 622         if (phydev->drv->remove)
 623                 phydev->drv->remove(phydev);
 624
 625         put_driver(dev->driver);
 626         phydev->drv = NULL;
 627
 628         return 0;
 629 }
 630
 631 int phy_driver_register(struct phy_driver *new_driver)
 632 {
 633         int retval;
 634
 635         memset(&new_driver->driver, 0, sizeof(new_driver->driver));
 636         new_driver->driver.name = new_driver->name;
 637         new_driver->driver.bus = &mdio_bus_type;
 638         new_driver->driver.probe = phy_probe;
 639         new_driver->driver.remove = phy_remove;
 640
 641         retval = driver_register(&new_driver->driver);
 642
 643         if (retval) {
 644                 printk(KERN_ERR "%s: Error %d in registering driver\n",
 645                                 new_driver->name, retval);
 646
 647                 return retval;
 648         }
 649
 650         pr_info("%s: Registered new driver\n", new_driver->name);
 651
 652         return 0;
 653 }
 654 EXPORT_SYMBOL(phy_driver_register);
 655
 656 void phy_driver_unregister(struct phy_driver *drv)
 657 {
 658         driver_unregister(&drv->driver);
 659 }
 660 EXPORT_SYMBOL(phy_driver_unregister);
 661
 662 static struct phy_driver genphy_driver = {
 663         .phy_id         = 0xffffffff,
 664         .phy_id_mask    = 0xffffffff,
 665         .name           = "Generic PHY",
 666         .config_init    = genphy_config_init,
 667         .features       = 0,
 668         .config_aneg    = genphy_config_aneg,
 669         .read_status    = genphy_read_status,
 670         .driver         = {.owner= THIS_MODULE, },
 671 };
 672
 673 static int __init phy_init(void)
 674 {
 675         int rc;
 676
 677         rc = mdio_bus_init();
 678         if (rc)
 679                 return rc;
 680
 681         rc = phy_driver_register(&genphy_driver);
 682         if (rc)
 683                 mdio_bus_exit();
 684
 685         return rc;
 686 }
 687
 688 static void __exit phy_exit(void)
 689 {
 690         phy_driver_unregister(&genphy_driver);
 691         mdio_bus_exit();
 692 }
 693
 694 subsys_initcall(phy_init);
 695 module_exit(phy_exit);