2 * Universal Host Controller Interface driver for USB.
4 * Maintainer: Alan Stern <stern@rowland.harvard.edu>
6 * (C) Copyright 1999 Linus Torvalds
7 * (C) Copyright 1999-2002 Johannes Erdfelt, johannes@erdfelt.com
8 * (C) Copyright 1999 Randy Dunlap
9 * (C) Copyright 1999 Georg Acher, acher@in.tum.de
10 * (C) Copyright 1999 Deti Fliegl, deti@fliegl.de
11 * (C) Copyright 1999 Thomas Sailer, sailer@ife.ee.ethz.ch
12 * (C) Copyright 1999 Roman Weissgaerber, weissg@vienna.at
13 * (C) Copyright 2000 Yggdrasil Computing, Inc. (port of new PCI interface
14 * support from usb-ohci.c by Adam Richter, adam@yggdrasil.com).
15 * (C) Copyright 1999 Gregory P. Smith (from usb-ohci.c)
16 * (C) Copyright 2004 Alan Stern, stern@rowland.harvard.edu
19 static int uhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb);
20 static void uhci_unlink_generic(struct uhci_hcd *uhci, struct urb *urb);
21 static void uhci_remove_pending_urbps(struct uhci_hcd *uhci);
22 static void uhci_free_pending_qhs(struct uhci_hcd *uhci);
23 static void uhci_free_pending_tds(struct uhci_hcd *uhci);
26 * Technically, updating td->status here is a race, but it's not really a
27 * problem. The worst that can happen is that we set the IOC bit again
28 * generating a spurious interrupt. We could fix this by creating another
29 * QH and leaving the IOC bit always set, but then we would have to play
30 * games with the FSBR code to make sure we get the correct order in all
31 * the cases. I don't think it's worth the effort
33 static inline void uhci_set_next_interrupt(struct uhci_hcd *uhci)
36 mod_timer(&uhci_to_hcd(uhci)->rh_timer, jiffies);
37 uhci->term_td->status |= cpu_to_le32(TD_CTRL_IOC);
40 static inline void uhci_clear_next_interrupt(struct uhci_hcd *uhci)
42 uhci->term_td->status &= ~cpu_to_le32(TD_CTRL_IOC);
45 static inline void uhci_moveto_complete(struct uhci_hcd *uhci,
46 struct urb_priv *urbp)
48 list_move_tail(&urbp->urb_list, &uhci->complete_list);
51 static struct uhci_td *uhci_alloc_td(struct uhci_hcd *uhci)
53 dma_addr_t dma_handle;
56 td = dma_pool_alloc(uhci->td_pool, GFP_ATOMIC, &dma_handle);
60 td->dma_handle = dma_handle;
62 td->link = UHCI_PTR_TERM;
67 INIT_LIST_HEAD(&td->list);
68 INIT_LIST_HEAD(&td->remove_list);
69 INIT_LIST_HEAD(&td->fl_list);
74 static inline void uhci_fill_td(struct uhci_td *td, u32 status,
75 u32 token, u32 buffer)
77 td->status = cpu_to_le32(status);
78 td->token = cpu_to_le32(token);
79 td->buffer = cpu_to_le32(buffer);
83 * We insert Isochronous URBs directly into the frame list at the beginning
85 static void uhci_insert_td_frame_list(struct uhci_hcd *uhci, struct uhci_td *td, unsigned framenum)
87 framenum &= (UHCI_NUMFRAMES - 1);
91 /* Is there a TD already mapped there? */
92 if (uhci->frame_cpu[framenum]) {
93 struct uhci_td *ftd, *ltd;
95 ftd = uhci->frame_cpu[framenum];
96 ltd = list_entry(ftd->fl_list.prev, struct uhci_td, fl_list);
98 list_add_tail(&td->fl_list, &ftd->fl_list);
100 td->link = ltd->link;
102 ltd->link = cpu_to_le32(td->dma_handle);
104 td->link = uhci->frame[framenum];
106 uhci->frame[framenum] = cpu_to_le32(td->dma_handle);
107 uhci->frame_cpu[framenum] = td;
111 static inline void uhci_remove_td_frame_list(struct uhci_hcd *uhci,
114 /* If it's not inserted, don't remove it */
115 if (td->frame == -1) {
116 WARN_ON(!list_empty(&td->fl_list));
120 if (uhci->frame_cpu[td->frame] == td) {
121 if (list_empty(&td->fl_list)) {
122 uhci->frame[td->frame] = td->link;
123 uhci->frame_cpu[td->frame] = NULL;
127 ntd = list_entry(td->fl_list.next, struct uhci_td, fl_list);
128 uhci->frame[td->frame] = cpu_to_le32(ntd->dma_handle);
129 uhci->frame_cpu[td->frame] = ntd;
134 ptd = list_entry(td->fl_list.prev, struct uhci_td, fl_list);
135 ptd->link = td->link;
138 list_del_init(&td->fl_list);
142 static void unlink_isochronous_tds(struct uhci_hcd *uhci, struct urb *urb)
144 struct urb_priv *urbp = (struct urb_priv *) urb->hcpriv;
147 list_for_each_entry(td, &urbp->td_list, list)
148 uhci_remove_td_frame_list(uhci, td);
153 * Inserts a td list into qh.
155 static void uhci_insert_tds_in_qh(struct uhci_qh *qh, struct urb *urb, __le32 breadth)
157 struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
161 /* Ordering isn't important here yet since the QH hasn't been */
162 /* inserted into the schedule yet */
163 plink = &qh->element;
164 list_for_each_entry(td, &urbp->td_list, list) {
165 *plink = cpu_to_le32(td->dma_handle) | breadth;
168 *plink = UHCI_PTR_TERM;
171 static void uhci_free_td(struct uhci_hcd *uhci, struct uhci_td *td)
173 if (!list_empty(&td->list))
174 dev_warn(uhci_dev(uhci), "td %p still in list!\n", td);
175 if (!list_empty(&td->remove_list))
176 dev_warn(uhci_dev(uhci), "td %p still in remove_list!\n", td);
177 if (!list_empty(&td->fl_list))
178 dev_warn(uhci_dev(uhci), "td %p still in fl_list!\n", td);
180 dma_pool_free(uhci->td_pool, td, td->dma_handle);
183 static struct uhci_qh *uhci_alloc_qh(struct uhci_hcd *uhci)
185 dma_addr_t dma_handle;
188 qh = dma_pool_alloc(uhci->qh_pool, GFP_ATOMIC, &dma_handle);
192 qh->dma_handle = dma_handle;
194 qh->element = UHCI_PTR_TERM;
195 qh->link = UHCI_PTR_TERM;
199 INIT_LIST_HEAD(&qh->list);
200 INIT_LIST_HEAD(&qh->remove_list);
205 static void uhci_free_qh(struct uhci_hcd *uhci, struct uhci_qh *qh)
207 if (!list_empty(&qh->list))
208 dev_warn(uhci_dev(uhci), "qh %p list not empty!\n", qh);
209 if (!list_empty(&qh->remove_list))
210 dev_warn(uhci_dev(uhci), "qh %p still in remove_list!\n", qh);
212 dma_pool_free(uhci->qh_pool, qh, qh->dma_handle);
216 * Append this urb's qh after the last qh in skelqh->list
218 * Note that urb_priv.queue_list doesn't have a separate queue head;
219 * it's a ring with every element "live".
221 static void uhci_insert_qh(struct uhci_hcd *uhci, struct uhci_qh *skelqh, struct urb *urb)
223 struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
224 struct urb_priv *turbp;
227 /* Grab the last QH */
228 lqh = list_entry(skelqh->list.prev, struct uhci_qh, list);
230 /* Point to the next skelqh */
231 urbp->qh->link = lqh->link;
232 wmb(); /* Ordering is important */
235 * Patch QHs for previous endpoint's queued URBs? HC goes
236 * here next, not to the next skelqh it now points to.
238 * lqh --> td ... --> qh ... --> td --> qh ... --> td
241 * +<----------------+-----------------+
243 * newqh --> td ... --> td
248 * The HC could see (and use!) any of these as we write them.
250 lqh->link = cpu_to_le32(urbp->qh->dma_handle) | UHCI_PTR_QH;
252 list_for_each_entry(turbp, &lqh->urbp->queue_list, queue_list)
253 turbp->qh->link = lqh->link;
256 list_add_tail(&urbp->qh->list, &skelqh->list);
260 * Start removal of QH from schedule; it finishes next frame.
261 * TDs should be unlinked before this is called.
263 static void uhci_remove_qh(struct uhci_hcd *uhci, struct uhci_qh *qh)
272 * Only go through the hoops if it's actually linked in
274 if (!list_empty(&qh->list)) {
276 /* If our queue is nonempty, make the next URB the head */
277 if (!list_empty(&qh->urbp->queue_list)) {
278 struct urb_priv *nurbp;
280 nurbp = list_entry(qh->urbp->queue_list.next,
281 struct urb_priv, queue_list);
283 list_add(&nurbp->qh->list, &qh->list);
284 newlink = cpu_to_le32(nurbp->qh->dma_handle) | UHCI_PTR_QH;
288 /* Fix up the previous QH's queue to link to either
289 * the new head of this queue or the start of the
290 * next endpoint's queue. */
291 pqh = list_entry(qh->list.prev, struct uhci_qh, list);
294 struct urb_priv *turbp;
296 list_for_each_entry(turbp, &pqh->urbp->queue_list,
298 turbp->qh->link = newlink;
302 /* Leave qh->link in case the HC is on the QH now, it will */
303 /* continue the rest of the schedule */
304 qh->element = UHCI_PTR_TERM;
306 list_del_init(&qh->list);
309 list_del_init(&qh->urbp->queue_list);
312 uhci_get_current_frame_number(uhci);
313 if (uhci->frame_number + uhci->is_stopped != uhci->qh_remove_age) {
314 uhci_free_pending_qhs(uhci);
315 uhci->qh_remove_age = uhci->frame_number;
318 /* Check to see if the remove list is empty. Set the IOC bit */
319 /* to force an interrupt so we can remove the QH */
320 if (list_empty(&uhci->qh_remove_list))
321 uhci_set_next_interrupt(uhci);
323 list_add(&qh->remove_list, &uhci->qh_remove_list);
326 static int uhci_fixup_toggle(struct urb *urb, unsigned int toggle)
328 struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
331 list_for_each_entry(td, &urbp->td_list, list) {
333 td->token |= cpu_to_le32(TD_TOKEN_TOGGLE);
335 td->token &= ~cpu_to_le32(TD_TOKEN_TOGGLE);
343 /* This function will append one URB's QH to another URB's QH. This is for */
344 /* queuing interrupt, control or bulk transfers */
345 static void uhci_append_queued_urb(struct uhci_hcd *uhci, struct urb *eurb, struct urb *urb)
347 struct urb_priv *eurbp, *urbp, *furbp, *lurbp;
348 struct uhci_td *lltd;
350 eurbp = eurb->hcpriv;
353 /* Find the first URB in the queue */
356 list_for_each_entry(furbp, &eurbp->queue_list, queue_list)
361 lurbp = list_entry(furbp->queue_list.prev, struct urb_priv, queue_list);
363 lltd = list_entry(lurbp->td_list.prev, struct uhci_td, list);
365 /* Control transfers always start with toggle 0 */
366 if (!usb_pipecontrol(urb->pipe))
367 usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
368 usb_pipeout(urb->pipe),
369 uhci_fixup_toggle(urb,
370 uhci_toggle(td_token(lltd)) ^ 1));
372 /* All qhs in the queue need to link to the next queue */
373 urbp->qh->link = eurbp->qh->link;
375 wmb(); /* Make sure we flush everything */
377 lltd->link = cpu_to_le32(urbp->qh->dma_handle) | UHCI_PTR_QH;
379 list_add_tail(&urbp->queue_list, &furbp->queue_list);
384 static void uhci_delete_queued_urb(struct uhci_hcd *uhci, struct urb *urb)
386 struct urb_priv *urbp, *nurbp, *purbp, *turbp;
387 struct uhci_td *pltd;
392 if (list_empty(&urbp->queue_list))
395 nurbp = list_entry(urbp->queue_list.next, struct urb_priv, queue_list);
398 * Fix up the toggle for the following URBs in the queue.
399 * Only needed for bulk and interrupt: control and isochronous
400 * endpoints don't propagate toggles between messages.
402 if (usb_pipebulk(urb->pipe) || usb_pipeint(urb->pipe)) {
404 /* We just set the toggle in uhci_unlink_generic */
405 toggle = usb_gettoggle(urb->dev,
406 usb_pipeendpoint(urb->pipe),
407 usb_pipeout(urb->pipe));
409 /* If we're in the middle of the queue, grab the */
410 /* toggle from the TD previous to us */
411 purbp = list_entry(urbp->queue_list.prev,
412 struct urb_priv, queue_list);
413 pltd = list_entry(purbp->td_list.prev,
414 struct uhci_td, list);
415 toggle = uhci_toggle(td_token(pltd)) ^ 1;
418 list_for_each_entry(turbp, &urbp->queue_list, queue_list) {
421 toggle = uhci_fixup_toggle(turbp->urb, toggle);
424 usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
425 usb_pipeout(urb->pipe), toggle);
429 /* We're somewhere in the middle (or end). The case where
430 * we're at the head is handled in uhci_remove_qh(). */
431 purbp = list_entry(urbp->queue_list.prev, struct urb_priv,
434 pltd = list_entry(purbp->td_list.prev, struct uhci_td, list);
436 pltd->link = cpu_to_le32(nurbp->qh->dma_handle) | UHCI_PTR_QH;
438 /* The next URB happens to be the beginning, so */
439 /* we're the last, end the chain */
440 pltd->link = UHCI_PTR_TERM;
443 /* urbp->queue_list is handled in uhci_remove_qh() */
446 static struct urb_priv *uhci_alloc_urb_priv(struct uhci_hcd *uhci, struct urb *urb)
448 struct urb_priv *urbp;
450 urbp = kmem_cache_alloc(uhci_up_cachep, SLAB_ATOMIC);
454 memset((void *)urbp, 0, sizeof(*urbp));
456 urbp->fsbrtime = jiffies;
459 INIT_LIST_HEAD(&urbp->td_list);
460 INIT_LIST_HEAD(&urbp->queue_list);
461 INIT_LIST_HEAD(&urbp->urb_list);
463 list_add_tail(&urbp->urb_list, &uhci->urb_list);
470 static void uhci_add_td_to_urb(struct urb *urb, struct uhci_td *td)
472 struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
474 list_add_tail(&td->list, &urbp->td_list);
477 static void uhci_remove_td_from_urb(struct uhci_td *td)
479 if (list_empty(&td->list))
482 list_del_init(&td->list);
485 static void uhci_destroy_urb_priv(struct uhci_hcd *uhci, struct urb *urb)
487 struct uhci_td *td, *tmp;
488 struct urb_priv *urbp;
490 urbp = (struct urb_priv *)urb->hcpriv;
494 if (!list_empty(&urbp->urb_list))
495 dev_warn(uhci_dev(uhci), "urb %p still on uhci->urb_list "
496 "or uhci->remove_list!\n", urb);
498 uhci_get_current_frame_number(uhci);
499 if (uhci->frame_number + uhci->is_stopped != uhci->td_remove_age) {
500 uhci_free_pending_tds(uhci);
501 uhci->td_remove_age = uhci->frame_number;
504 /* Check to see if the remove list is empty. Set the IOC bit */
505 /* to force an interrupt so we can remove the TDs*/
506 if (list_empty(&uhci->td_remove_list))
507 uhci_set_next_interrupt(uhci);
509 list_for_each_entry_safe(td, tmp, &urbp->td_list, list) {
510 uhci_remove_td_from_urb(td);
511 list_add(&td->remove_list, &uhci->td_remove_list);
515 kmem_cache_free(uhci_up_cachep, urbp);
518 static void uhci_inc_fsbr(struct uhci_hcd *uhci, struct urb *urb)
520 struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
522 if ((!(urb->transfer_flags & URB_NO_FSBR)) && !urbp->fsbr) {
524 if (!uhci->fsbr++ && !uhci->fsbrtimeout)
525 uhci->skel_term_qh->link = cpu_to_le32(uhci->skel_fs_control_qh->dma_handle) | UHCI_PTR_QH;
529 static void uhci_dec_fsbr(struct uhci_hcd *uhci, struct urb *urb)
531 struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
533 if ((!(urb->transfer_flags & URB_NO_FSBR)) && urbp->fsbr) {
536 uhci->fsbrtimeout = jiffies + FSBR_DELAY;
541 * Map status to standard result codes
543 * <status> is (td_status(td) & 0xF60000), a.k.a.
544 * uhci_status_bits(td_status(td)).
545 * Note: <status> does not include the TD_CTRL_NAK bit.
546 * <dir_out> is True for output TDs and False for input TDs.
548 static int uhci_map_status(int status, int dir_out)
552 if (status & TD_CTRL_BITSTUFF) /* Bitstuff error */
554 if (status & TD_CTRL_CRCTIMEO) { /* CRC/Timeout */
560 if (status & TD_CTRL_BABBLE) /* Babble */
562 if (status & TD_CTRL_DBUFERR) /* Buffer error */
564 if (status & TD_CTRL_STALLED) /* Stalled */
566 WARN_ON(status & TD_CTRL_ACTIVE); /* Active */
573 static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb, struct urb *eurb)
575 struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
577 struct uhci_qh *qh, *skelqh;
578 unsigned long destination, status;
579 int maxsze = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
580 int len = urb->transfer_buffer_length;
581 dma_addr_t data = urb->transfer_dma;
583 /* The "pipe" thing contains the destination in bits 8--18 */
584 destination = (urb->pipe & PIPE_DEVEP_MASK) | USB_PID_SETUP;
587 status = TD_CTRL_ACTIVE | uhci_maxerr(3);
588 if (urb->dev->speed == USB_SPEED_LOW)
589 status |= TD_CTRL_LS;
592 * Build the TD for the control request setup packet
594 td = uhci_alloc_td(uhci);
598 uhci_add_td_to_urb(urb, td);
599 uhci_fill_td(td, status, destination | uhci_explen(8),
603 * If direction is "send", change the packet ID from SETUP (0x2D)
604 * to OUT (0xE1). Else change it from SETUP to IN (0x69) and
605 * set Short Packet Detect (SPD) for all data packets.
607 if (usb_pipeout(urb->pipe))
608 destination ^= (USB_PID_SETUP ^ USB_PID_OUT);
610 destination ^= (USB_PID_SETUP ^ USB_PID_IN);
611 status |= TD_CTRL_SPD;
623 td = uhci_alloc_td(uhci);
627 /* Alternate Data0/1 (start with Data1) */
628 destination ^= TD_TOKEN_TOGGLE;
630 uhci_add_td_to_urb(urb, td);
631 uhci_fill_td(td, status, destination | uhci_explen(pktsze),
639 * Build the final TD for control status
641 td = uhci_alloc_td(uhci);
646 * It's IN if the pipe is an output pipe or we're not expecting
649 destination &= ~TD_TOKEN_PID_MASK;
650 if (usb_pipeout(urb->pipe) || !urb->transfer_buffer_length)
651 destination |= USB_PID_IN;
653 destination |= USB_PID_OUT;
655 destination |= TD_TOKEN_TOGGLE; /* End in Data1 */
657 status &= ~TD_CTRL_SPD;
659 uhci_add_td_to_urb(urb, td);
660 uhci_fill_td(td, status | TD_CTRL_IOC,
661 destination | uhci_explen(0), 0);
663 qh = uhci_alloc_qh(uhci);
670 uhci_insert_tds_in_qh(qh, urb, UHCI_PTR_BREADTH);
672 /* Low-speed transfers get a different queue, and won't hog the bus.
673 * Also, some devices enumerate better without FSBR; the easiest way
674 * to do that is to put URBs on the low-speed queue while the device
675 * is in the DEFAULT state. */
676 if (urb->dev->speed == USB_SPEED_LOW ||
677 urb->dev->state == USB_STATE_DEFAULT)
678 skelqh = uhci->skel_ls_control_qh;
680 skelqh = uhci->skel_fs_control_qh;
681 uhci_inc_fsbr(uhci, urb);
685 uhci_append_queued_urb(uhci, eurb, urb);
687 uhci_insert_qh(uhci, skelqh, urb);
693 * If control-IN transfer was short, the status packet wasn't sent.
694 * This routine changes the element pointer in the QH to point at the
695 * status TD. It's safe to do this even while the QH is live, because
696 * the hardware only updates the element pointer following a successful
697 * transfer. The inactive TD for the short packet won't cause an update,
698 * so the pointer won't get overwritten. The next time the controller
699 * sees this QH, it will send the status packet.
701 static int usb_control_retrigger_status(struct uhci_hcd *uhci, struct urb *urb)
703 struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
706 urbp->short_control_packet = 1;
708 td = list_entry(urbp->td_list.prev, struct uhci_td, list);
709 urbp->qh->element = cpu_to_le32(td->dma_handle);
715 static int uhci_result_control(struct uhci_hcd *uhci, struct urb *urb)
717 struct list_head *tmp, *head;
718 struct urb_priv *urbp = urb->hcpriv;
723 if (list_empty(&urbp->td_list))
726 head = &urbp->td_list;
728 if (urbp->short_control_packet) {
734 td = list_entry(tmp, struct uhci_td, list);
736 /* The first TD is the SETUP stage, check the status, but skip */
738 status = uhci_status_bits(td_status(td));
739 if (status & TD_CTRL_ACTIVE)
745 urb->actual_length = 0;
747 /* The rest of the TDs (but the last) are data */
749 while (tmp != head && tmp->next != head) {
750 unsigned int ctrlstat;
752 td = list_entry(tmp, struct uhci_td, list);
755 ctrlstat = td_status(td);
756 status = uhci_status_bits(ctrlstat);
757 if (status & TD_CTRL_ACTIVE)
760 urb->actual_length += uhci_actual_length(ctrlstat);
765 /* Check to see if we received a short packet */
766 if (uhci_actual_length(ctrlstat) <
767 uhci_expected_length(td_token(td))) {
768 if (urb->transfer_flags & URB_SHORT_NOT_OK) {
773 if (uhci_packetid(td_token(td)) == USB_PID_IN)
774 return usb_control_retrigger_status(uhci, urb);
781 td = list_entry(tmp, struct uhci_td, list);
783 /* Control status stage */
784 status = td_status(td);
786 #ifdef I_HAVE_BUGGY_APC_BACKUPS
787 /* APC BackUPS Pro kludge */
788 /* It tries to send all of the descriptor instead of the amount */
790 if (status & TD_CTRL_IOC && /* IOC is masked out by uhci_status_bits */
791 status & TD_CTRL_ACTIVE &&
792 status & TD_CTRL_NAK)
796 status = uhci_status_bits(status);
797 if (status & TD_CTRL_ACTIVE)
806 ret = uhci_map_status(status, uhci_packetout(td_token(td)));
809 if ((debug == 1 && ret != -EPIPE) || debug > 1) {
810 /* Some debugging code */
811 dev_dbg(uhci_dev(uhci), "%s: failed with status %x\n",
812 __FUNCTION__, status);
815 /* Print the chain for debugging purposes */
816 uhci_show_qh(urbp->qh, errbuf, ERRBUF_LEN, 0);
826 * Common submit for bulk and interrupt
828 static int uhci_submit_common(struct uhci_hcd *uhci, struct urb *urb, struct urb *eurb, struct uhci_qh *skelqh)
832 unsigned long destination, status;
833 int maxsze = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
834 int len = urb->transfer_buffer_length;
835 struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
836 dma_addr_t data = urb->transfer_dma;
841 /* The "pipe" thing contains the destination in bits 8--18 */
842 destination = (urb->pipe & PIPE_DEVEP_MASK) | usb_packetid(urb->pipe);
844 status = uhci_maxerr(3) | TD_CTRL_ACTIVE;
845 if (urb->dev->speed == USB_SPEED_LOW)
846 status |= TD_CTRL_LS;
847 if (usb_pipein(urb->pipe))
848 status |= TD_CTRL_SPD;
853 do { /* Allow zero length packets */
858 if (!(urb->transfer_flags & URB_SHORT_NOT_OK))
859 status &= ~TD_CTRL_SPD;
862 td = uhci_alloc_td(uhci);
866 uhci_add_td_to_urb(urb, td);
867 uhci_fill_td(td, status, destination | uhci_explen(pktsze) |
868 (usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe),
869 usb_pipeout(urb->pipe)) << TD_TOKEN_TOGGLE_SHIFT),
875 usb_dotoggle(urb->dev, usb_pipeendpoint(urb->pipe),
876 usb_pipeout(urb->pipe));
880 * URB_ZERO_PACKET means adding a 0-length packet, if direction
881 * is OUT and the transfer_length was an exact multiple of maxsze,
882 * hence (len = transfer_length - N * maxsze) == 0
883 * however, if transfer_length == 0, the zero packet was already
886 if (usb_pipeout(urb->pipe) && (urb->transfer_flags & URB_ZERO_PACKET) &&
887 !len && urb->transfer_buffer_length) {
888 td = uhci_alloc_td(uhci);
892 uhci_add_td_to_urb(urb, td);
893 uhci_fill_td(td, status, destination | uhci_explen(0) |
894 (usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe),
895 usb_pipeout(urb->pipe)) << TD_TOKEN_TOGGLE_SHIFT),
898 usb_dotoggle(urb->dev, usb_pipeendpoint(urb->pipe),
899 usb_pipeout(urb->pipe));
902 /* Set the interrupt-on-completion flag on the last packet.
903 * A more-or-less typical 4 KB URB (= size of one memory page)
904 * will require about 3 ms to transfer; that's a little on the
905 * fast side but not enough to justify delaying an interrupt
906 * more than 2 or 3 URBs, so we will ignore the URB_NO_INTERRUPT
908 td->status |= cpu_to_le32(TD_CTRL_IOC);
910 qh = uhci_alloc_qh(uhci);
917 /* Always breadth first */
918 uhci_insert_tds_in_qh(qh, urb, UHCI_PTR_BREADTH);
921 uhci_append_queued_urb(uhci, eurb, urb);
923 uhci_insert_qh(uhci, skelqh, urb);
929 * Common result for bulk and interrupt
931 static int uhci_result_common(struct uhci_hcd *uhci, struct urb *urb)
933 struct urb_priv *urbp = urb->hcpriv;
935 unsigned int status = 0;
938 urb->actual_length = 0;
940 list_for_each_entry(td, &urbp->td_list, list) {
941 unsigned int ctrlstat = td_status(td);
943 status = uhci_status_bits(ctrlstat);
944 if (status & TD_CTRL_ACTIVE)
947 urb->actual_length += uhci_actual_length(ctrlstat);
952 if (uhci_actual_length(ctrlstat) <
953 uhci_expected_length(td_token(td))) {
954 if (urb->transfer_flags & URB_SHORT_NOT_OK) {
965 ret = uhci_map_status(status, uhci_packetout(td_token(td)));
969 * Enable this chunk of code if you want to see some more debugging.
970 * But be careful, it has the tendancy to starve out khubd and prevent
971 * disconnects from happening successfully if you have a slow debug
972 * log interface (like a serial console.
975 if ((debug == 1 && ret != -EPIPE) || debug > 1) {
976 /* Some debugging code */
977 dev_dbg(uhci_dev(uhci), "%s: failed with status %x\n",
978 __FUNCTION__, status);
981 /* Print the chain for debugging purposes */
982 uhci_show_qh(urbp->qh, errbuf, ERRBUF_LEN, 0);
991 static inline int uhci_submit_bulk(struct uhci_hcd *uhci, struct urb *urb, struct urb *eurb)
995 /* Can't have low-speed bulk transfers */
996 if (urb->dev->speed == USB_SPEED_LOW)
999 ret = uhci_submit_common(uhci, urb, eurb, uhci->skel_bulk_qh);
1000 if (ret == -EINPROGRESS)
1001 uhci_inc_fsbr(uhci, urb);
1006 static inline int uhci_submit_interrupt(struct uhci_hcd *uhci, struct urb *urb, struct urb *eurb)
1008 /* USB 1.1 interrupt transfers only involve one packet per interval;
1009 * that's the uhci_submit_common() "breadth first" policy. Drivers
1010 * can submit urbs of any length, but longer ones might need many
1011 * intervals to complete.
1013 return uhci_submit_common(uhci, urb, eurb, uhci->skelqh[__interval_to_skel(urb->interval)]);
1017 * Isochronous transfers
1019 static int isochronous_find_limits(struct uhci_hcd *uhci, struct urb *urb, unsigned int *start, unsigned int *end)
1021 struct urb *last_urb = NULL;
1022 struct urb_priv *up;
1025 list_for_each_entry(up, &uhci->urb_list, urb_list) {
1026 struct urb *u = up->urb;
1028 /* look for pending URBs with identical pipe handle */
1029 if ((urb->pipe == u->pipe) && (urb->dev == u->dev) &&
1030 (u->status == -EINPROGRESS) && (u != urb)) {
1032 *start = u->start_frame;
1038 *end = (last_urb->start_frame + last_urb->number_of_packets *
1039 last_urb->interval) & (UHCI_NUMFRAMES-1);
1042 ret = -1; /* no previous urb found */
1047 static int isochronous_find_start(struct uhci_hcd *uhci, struct urb *urb)
1050 unsigned int start = 0, end = 0;
1052 if (urb->number_of_packets > 900) /* 900? Why? */
1055 limits = isochronous_find_limits(uhci, urb, &start, &end);
1057 if (urb->transfer_flags & URB_ISO_ASAP) {
1059 uhci_get_current_frame_number(uhci);
1060 urb->start_frame = (uhci->frame_number + 10)
1061 & (UHCI_NUMFRAMES - 1);
1063 urb->start_frame = end;
1065 urb->start_frame &= (UHCI_NUMFRAMES - 1);
1066 /* FIXME: Sanity check */
1073 * Isochronous transfers
1075 static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb)
1079 int status, destination;
1080 struct urb_priv *urbp = (struct urb_priv *) urb->hcpriv;
1082 status = TD_CTRL_ACTIVE | TD_CTRL_IOS;
1083 destination = (urb->pipe & PIPE_DEVEP_MASK) | usb_packetid(urb->pipe);
1085 ret = isochronous_find_start(uhci, urb);
1089 for (i = 0; i < urb->number_of_packets; i++) {
1090 td = uhci_alloc_td(uhci);
1094 uhci_add_td_to_urb(urb, td);
1095 uhci_fill_td(td, status, destination | uhci_explen(urb->iso_frame_desc[i].length),
1096 urb->transfer_dma + urb->iso_frame_desc[i].offset);
1098 if (i + 1 >= urb->number_of_packets)
1099 td->status |= cpu_to_le32(TD_CTRL_IOC);
1102 frame = urb->start_frame;
1103 list_for_each_entry(td, &urbp->td_list, list) {
1104 uhci_insert_td_frame_list(uhci, td, frame);
1105 frame += urb->interval;
1108 return -EINPROGRESS;
1111 static int uhci_result_isochronous(struct uhci_hcd *uhci, struct urb *urb)
1114 struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
1118 urb->actual_length = urb->error_count = 0;
1121 list_for_each_entry(td, &urbp->td_list, list) {
1123 unsigned int ctrlstat = td_status(td);
1125 if (ctrlstat & TD_CTRL_ACTIVE)
1126 return -EINPROGRESS;
1128 actlength = uhci_actual_length(ctrlstat);
1129 urb->iso_frame_desc[i].actual_length = actlength;
1130 urb->actual_length += actlength;
1132 status = uhci_map_status(uhci_status_bits(ctrlstat),
1133 usb_pipeout(urb->pipe));
1134 urb->iso_frame_desc[i].status = status;
1142 unlink_isochronous_tds(uhci, urb);
1147 static struct urb *uhci_find_urb_ep(struct uhci_hcd *uhci, struct urb *urb)
1149 struct urb_priv *up;
1151 /* We don't match Isoc transfers since they are special */
1152 if (usb_pipeisoc(urb->pipe))
1155 list_for_each_entry(up, &uhci->urb_list, urb_list) {
1156 struct urb *u = up->urb;
1158 if (u->dev == urb->dev && u->status == -EINPROGRESS) {
1159 /* For control, ignore the direction */
1160 if (usb_pipecontrol(urb->pipe) &&
1161 (u->pipe & ~USB_DIR_IN) == (urb->pipe & ~USB_DIR_IN))
1163 else if (u->pipe == urb->pipe)
1171 static int uhci_urb_enqueue(struct usb_hcd *hcd,
1172 struct usb_host_endpoint *ep,
1173 struct urb *urb, gfp_t mem_flags)
1176 struct uhci_hcd *uhci = hcd_to_uhci(hcd);
1177 unsigned long flags;
1181 spin_lock_irqsave(&uhci->lock, flags);
1184 if (ret != -EINPROGRESS) /* URB already unlinked! */
1187 eurb = uhci_find_urb_ep(uhci, urb);
1189 if (!uhci_alloc_urb_priv(uhci, urb)) {
1194 switch (usb_pipetype(urb->pipe)) {
1196 ret = uhci_submit_control(uhci, urb, eurb);
1198 case PIPE_INTERRUPT:
1200 bustime = usb_check_bandwidth(urb->dev, urb);
1204 ret = uhci_submit_interrupt(uhci, urb, eurb);
1205 if (ret == -EINPROGRESS)
1206 usb_claim_bandwidth(urb->dev, urb, bustime, 0);
1208 } else { /* inherit from parent */
1209 urb->bandwidth = eurb->bandwidth;
1210 ret = uhci_submit_interrupt(uhci, urb, eurb);
1214 ret = uhci_submit_bulk(uhci, urb, eurb);
1216 case PIPE_ISOCHRONOUS:
1217 bustime = usb_check_bandwidth(urb->dev, urb);
1223 ret = uhci_submit_isochronous(uhci, urb);
1224 if (ret == -EINPROGRESS)
1225 usb_claim_bandwidth(urb->dev, urb, bustime, 1);
1229 if (ret != -EINPROGRESS) {
1230 /* Submit failed, so delete it from the urb_list */
1231 struct urb_priv *urbp = urb->hcpriv;
1233 list_del_init(&urbp->urb_list);
1234 uhci_destroy_urb_priv(uhci, urb);
1239 spin_unlock_irqrestore(&uhci->lock, flags);
1244 * Return the result of a transfer
1246 static void uhci_transfer_result(struct uhci_hcd *uhci, struct urb *urb)
1248 int ret = -EINPROGRESS;
1249 struct urb_priv *urbp;
1251 spin_lock(&urb->lock);
1253 urbp = (struct urb_priv *)urb->hcpriv;
1255 if (urb->status != -EINPROGRESS) /* URB already dequeued */
1258 switch (usb_pipetype(urb->pipe)) {
1260 ret = uhci_result_control(uhci, urb);
1263 case PIPE_INTERRUPT:
1264 ret = uhci_result_common(uhci, urb);
1266 case PIPE_ISOCHRONOUS:
1267 ret = uhci_result_isochronous(uhci, urb);
1271 if (ret == -EINPROGRESS)
1275 switch (usb_pipetype(urb->pipe)) {
1278 case PIPE_ISOCHRONOUS:
1279 /* Release bandwidth for Interrupt or Isoc. transfers */
1281 usb_release_bandwidth(urb->dev, urb, 1);
1282 uhci_unlink_generic(uhci, urb);
1284 case PIPE_INTERRUPT:
1285 /* Release bandwidth for Interrupt or Isoc. transfers */
1286 /* Make sure we don't release if we have a queued URB */
1287 if (list_empty(&urbp->queue_list) && urb->bandwidth)
1288 usb_release_bandwidth(urb->dev, urb, 0);
1290 /* bandwidth was passed on to queued URB, */
1291 /* so don't let usb_unlink_urb() release it */
1293 uhci_unlink_generic(uhci, urb);
1296 dev_info(uhci_dev(uhci), "%s: unknown pipe type %d "
1298 __FUNCTION__, usb_pipetype(urb->pipe), urb);
1301 /* Move it from uhci->urb_list to uhci->complete_list */
1302 uhci_moveto_complete(uhci, urbp);
1305 spin_unlock(&urb->lock);
1308 static void uhci_unlink_generic(struct uhci_hcd *uhci, struct urb *urb)
1310 struct list_head *head;
1312 struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
1315 uhci_dec_fsbr(uhci, urb); /* Safe since it checks */
1318 * Now we need to find out what the last successful toggle was
1319 * so we can update the local data toggle for the next transfer
1321 * There are 2 ways the last successful completed TD is found:
1323 * 1) The TD is NOT active and the actual length < expected length
1324 * 2) The TD is NOT active and it's the last TD in the chain
1326 * and a third way the first uncompleted TD is found:
1328 * 3) The TD is active and the previous TD is NOT active
1330 * Control and Isochronous ignore the toggle, so this is safe
1333 * FIXME: The toggle fixups won't be 100% reliable until we
1334 * change over to using a single queue for each endpoint and
1335 * stop the queue before unlinking.
1337 head = &urbp->td_list;
1338 list_for_each_entry(td, head, list) {
1339 unsigned int ctrlstat = td_status(td);
1341 if (!(ctrlstat & TD_CTRL_ACTIVE) &&
1342 (uhci_actual_length(ctrlstat) <
1343 uhci_expected_length(td_token(td)) ||
1344 td->list.next == head))
1345 usb_settoggle(urb->dev, uhci_endpoint(td_token(td)),
1346 uhci_packetout(td_token(td)),
1347 uhci_toggle(td_token(td)) ^ 1);
1348 else if ((ctrlstat & TD_CTRL_ACTIVE) && !prevactive)
1349 usb_settoggle(urb->dev, uhci_endpoint(td_token(td)),
1350 uhci_packetout(td_token(td)),
1351 uhci_toggle(td_token(td)));
1353 prevactive = ctrlstat & TD_CTRL_ACTIVE;
1356 uhci_delete_queued_urb(uhci, urb);
1358 /* The interrupt loop will reclaim the QHs */
1359 uhci_remove_qh(uhci, urbp->qh);
1363 static int uhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
1365 struct uhci_hcd *uhci = hcd_to_uhci(hcd);
1366 unsigned long flags;
1367 struct urb_priv *urbp;
1369 spin_lock_irqsave(&uhci->lock, flags);
1371 if (!urbp) /* URB was never linked! */
1373 list_del_init(&urbp->urb_list);
1375 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
1376 unlink_isochronous_tds(uhci, urb);
1377 uhci_unlink_generic(uhci, urb);
1379 uhci_get_current_frame_number(uhci);
1380 if (uhci->frame_number + uhci->is_stopped != uhci->urb_remove_age) {
1381 uhci_remove_pending_urbps(uhci);
1382 uhci->urb_remove_age = uhci->frame_number;
1385 /* If we're the first, set the next interrupt bit */
1386 if (list_empty(&uhci->urb_remove_list))
1387 uhci_set_next_interrupt(uhci);
1388 list_add_tail(&urbp->urb_list, &uhci->urb_remove_list);
1391 spin_unlock_irqrestore(&uhci->lock, flags);
1395 static int uhci_fsbr_timeout(struct uhci_hcd *uhci, struct urb *urb)
1397 struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
1398 struct list_head *head;
1402 uhci_dec_fsbr(uhci, urb);
1404 urbp->fsbr_timeout = 1;
1407 * Ideally we would want to fix qh->element as well, but it's
1408 * read/write by the HC, so that can introduce a race. It's not
1409 * really worth the hassle
1412 head = &urbp->td_list;
1413 list_for_each_entry(td, head, list) {
1415 * Make sure we don't do the last one (since it'll have the
1416 * TERM bit set) as well as we skip every so many TDs to
1417 * make sure it doesn't hog the bandwidth
1419 if (td->list.next != head && (count % DEPTH_INTERVAL) ==
1420 (DEPTH_INTERVAL - 1))
1421 td->link |= UHCI_PTR_DEPTH;
1429 static void uhci_free_pending_qhs(struct uhci_hcd *uhci)
1431 struct uhci_qh *qh, *tmp;
1433 list_for_each_entry_safe(qh, tmp, &uhci->qh_remove_list, remove_list) {
1434 list_del_init(&qh->remove_list);
1436 uhci_free_qh(uhci, qh);
1440 static void uhci_free_pending_tds(struct uhci_hcd *uhci)
1442 struct uhci_td *td, *tmp;
1444 list_for_each_entry_safe(td, tmp, &uhci->td_remove_list, remove_list) {
1445 list_del_init(&td->remove_list);
1447 uhci_free_td(uhci, td);
1452 uhci_finish_urb(struct usb_hcd *hcd, struct urb *urb, struct pt_regs *regs)
1453 __releases(uhci->lock)
1454 __acquires(uhci->lock)
1456 struct uhci_hcd *uhci = hcd_to_uhci(hcd);
1458 uhci_destroy_urb_priv(uhci, urb);
1460 spin_unlock(&uhci->lock);
1461 usb_hcd_giveback_urb(hcd, urb, regs);
1462 spin_lock(&uhci->lock);
1465 static void uhci_finish_completion(struct uhci_hcd *uhci, struct pt_regs *regs)
1467 struct urb_priv *urbp, *tmp;
1469 list_for_each_entry_safe(urbp, tmp, &uhci->complete_list, urb_list) {
1470 struct urb *urb = urbp->urb;
1472 list_del_init(&urbp->urb_list);
1473 uhci_finish_urb(uhci_to_hcd(uhci), urb, regs);
1477 static void uhci_remove_pending_urbps(struct uhci_hcd *uhci)
1480 /* Splice the urb_remove_list onto the end of the complete_list */
1481 list_splice_init(&uhci->urb_remove_list, uhci->complete_list.prev);
1484 /* Process events in the schedule, but only in one thread at a time */
1485 static void uhci_scan_schedule(struct uhci_hcd *uhci, struct pt_regs *regs)
1487 struct urb_priv *urbp, *tmp;
1489 /* Don't allow re-entrant calls */
1490 if (uhci->scan_in_progress) {
1491 uhci->need_rescan = 1;
1494 uhci->scan_in_progress = 1;
1496 uhci->need_rescan = 0;
1498 uhci_clear_next_interrupt(uhci);
1499 uhci_get_current_frame_number(uhci);
1501 if (uhci->frame_number + uhci->is_stopped != uhci->qh_remove_age)
1502 uhci_free_pending_qhs(uhci);
1503 if (uhci->frame_number + uhci->is_stopped != uhci->td_remove_age)
1504 uhci_free_pending_tds(uhci);
1505 if (uhci->frame_number + uhci->is_stopped != uhci->urb_remove_age)
1506 uhci_remove_pending_urbps(uhci);
1508 /* Walk the list of pending URBs to see which ones completed
1509 * (must be _safe because uhci_transfer_result() dequeues URBs) */
1510 list_for_each_entry_safe(urbp, tmp, &uhci->urb_list, urb_list) {
1511 struct urb *urb = urbp->urb;
1513 /* Checks the status and does all of the magic necessary */
1514 uhci_transfer_result(uhci, urb);
1516 uhci_finish_completion(uhci, regs);
1518 /* If the controller is stopped, we can finish these off right now */
1519 if (uhci->is_stopped) {
1520 uhci_free_pending_qhs(uhci);
1521 uhci_free_pending_tds(uhci);
1522 uhci_remove_pending_urbps(uhci);
1525 if (uhci->need_rescan)
1527 uhci->scan_in_progress = 0;
1529 if (list_empty(&uhci->urb_remove_list) &&
1530 list_empty(&uhci->td_remove_list) &&
1531 list_empty(&uhci->qh_remove_list))
1532 uhci_clear_next_interrupt(uhci);
1534 uhci_set_next_interrupt(uhci);
1536 /* Wake up anyone waiting for an URB to complete */
1537 wake_up_all(&uhci->waitqh);
1540 static void check_fsbr(struct uhci_hcd *uhci)
1542 struct urb_priv *up;
1544 list_for_each_entry(up, &uhci->urb_list, urb_list) {
1545 struct urb *u = up->urb;
1547 spin_lock(&u->lock);
1549 /* Check if the FSBR timed out */
1550 if (up->fsbr && !up->fsbr_timeout && time_after_eq(jiffies, up->fsbrtime + IDLE_TIMEOUT))
1551 uhci_fsbr_timeout(uhci, u);
1553 spin_unlock(&u->lock);
1556 /* Really disable FSBR */
1557 if (!uhci->fsbr && uhci->fsbrtimeout && time_after_eq(jiffies, uhci->fsbrtimeout)) {
1558 uhci->fsbrtimeout = 0;
1559 uhci->skel_term_qh->link = UHCI_PTR_TERM;