2 * File: arch/blackfin/kernel/kgdb.c
9 * Rev: $Id: kgdb_bfin_linux-2.6.x.patch 4934 2007-02-13 09:32:11Z sonicz $
12 * Copyright 2005-2006 Analog Devices Inc.
14 * Bugs: Enter bugs at http://blackfin.uclinux.org/
16 * This program is free software; you can redistribute it and/or modify
17 * it under the terms of the GNU General Public License as published by
18 * the Free Software Foundation; either version 2 of the License, or
19 * (at your option) any later version.
21 * This program is distributed in the hope that it will be useful,
22 * but WITHOUT ANY WARRANTY; without even the implied warranty of
23 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
24 * GNU General Public License for more details.
26 * You should have received a copy of the GNU General Public License
27 * along with this program; if not, see the file COPYING, or write
28 * to the Free Software Foundation, Inc.,
29 * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
32 #include <linux/string.h>
33 #include <linux/kernel.h>
34 #include <linux/sched.h>
35 #include <linux/smp.h>
36 #include <linux/spinlock.h>
37 #include <linux/delay.h>
38 #include <linux/ptrace.h> /* for linux pt_regs struct */
39 #include <linux/kgdb.h>
40 #include <linux/console.h>
41 #include <linux/init.h>
42 #include <linux/debugger.h>
43 #include <linux/errno.h>
44 #include <linux/irq.h>
45 #include <asm/system.h>
46 #include <asm/traps.h>
47 #include <asm/blackfin.h>
49 /* Put the error code here just in case the user cares. */
51 /* Likewise, the vector number here (since GDB only gets the signal
52 number through the usual means, and that's not very specific). */
53 int gdb_bf533vector = -1;
55 #if KGDB_MAX_NO_CPUS != 8
56 #error change the definition of slavecpulocks
59 void regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
61 gdb_regs[BFIN_R0] = regs->r0;
62 gdb_regs[BFIN_R1] = regs->r1;
63 gdb_regs[BFIN_R2] = regs->r2;
64 gdb_regs[BFIN_R3] = regs->r3;
65 gdb_regs[BFIN_R4] = regs->r4;
66 gdb_regs[BFIN_R5] = regs->r5;
67 gdb_regs[BFIN_R6] = regs->r6;
68 gdb_regs[BFIN_R7] = regs->r7;
69 gdb_regs[BFIN_P0] = regs->p0;
70 gdb_regs[BFIN_P1] = regs->p1;
71 gdb_regs[BFIN_P2] = regs->p2;
72 gdb_regs[BFIN_P3] = regs->p3;
73 gdb_regs[BFIN_P4] = regs->p4;
74 gdb_regs[BFIN_P5] = regs->p5;
75 gdb_regs[BFIN_SP] = regs->reserved;
76 gdb_regs[BFIN_FP] = regs->fp;
77 gdb_regs[BFIN_I0] = regs->i0;
78 gdb_regs[BFIN_I1] = regs->i1;
79 gdb_regs[BFIN_I2] = regs->i2;
80 gdb_regs[BFIN_I3] = regs->i3;
81 gdb_regs[BFIN_M0] = regs->m0;
82 gdb_regs[BFIN_M1] = regs->m1;
83 gdb_regs[BFIN_M2] = regs->m2;
84 gdb_regs[BFIN_M3] = regs->m3;
85 gdb_regs[BFIN_B0] = regs->b0;
86 gdb_regs[BFIN_B1] = regs->b1;
87 gdb_regs[BFIN_B2] = regs->b2;
88 gdb_regs[BFIN_B3] = regs->b3;
89 gdb_regs[BFIN_L0] = regs->l0;
90 gdb_regs[BFIN_L1] = regs->l1;
91 gdb_regs[BFIN_L2] = regs->l2;
92 gdb_regs[BFIN_L3] = regs->l3;
93 gdb_regs[BFIN_A0_DOT_X] = regs->a0x;
94 gdb_regs[BFIN_A0_DOT_W] = regs->a0w;
95 gdb_regs[BFIN_A1_DOT_X] = regs->a1x;
96 gdb_regs[BFIN_A1_DOT_W] = regs->a1w;
97 gdb_regs[BFIN_ASTAT] = regs->astat;
98 gdb_regs[BFIN_RETS] = regs->rets;
99 gdb_regs[BFIN_LC0] = regs->lc0;
100 gdb_regs[BFIN_LT0] = regs->lt0;
101 gdb_regs[BFIN_LB0] = regs->lb0;
102 gdb_regs[BFIN_LC1] = regs->lc1;
103 gdb_regs[BFIN_LT1] = regs->lt1;
104 gdb_regs[BFIN_LB1] = regs->lb1;
105 gdb_regs[BFIN_CYCLES] = 0;
106 gdb_regs[BFIN_CYCLES2] = 0;
107 gdb_regs[BFIN_USP] = regs->usp;
108 gdb_regs[BFIN_SEQSTAT] = regs->seqstat;
109 gdb_regs[BFIN_SYSCFG] = regs->syscfg;
110 gdb_regs[BFIN_RETI] = regs->pc;
111 gdb_regs[BFIN_RETX] = regs->retx;
112 gdb_regs[BFIN_RETN] = regs->retn;
113 gdb_regs[BFIN_RETE] = regs->rete;
114 gdb_regs[BFIN_PC] = regs->pc;
115 gdb_regs[BFIN_CC] = 0;
116 gdb_regs[BFIN_EXTRA1] = 0;
117 gdb_regs[BFIN_EXTRA2] = 0;
118 gdb_regs[BFIN_EXTRA3] = 0;
119 gdb_regs[BFIN_IPEND] = regs->ipend;
123 * Extracts ebp, esp and eip values understandable by gdb from the values
124 * saved by switch_to.
125 * thread.esp points to ebp. flags and ebp are pushed in switch_to hence esp
126 * prior to entering switch_to is 8 greater then the value that is saved.
127 * If switch_to changes, change following code appropriately.
129 void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
131 gdb_regs[BFIN_SP] = p->thread.ksp;
132 gdb_regs[BFIN_PC] = p->thread.pc;
133 gdb_regs[BFIN_SEQSTAT] = p->thread.seqstat;
136 void gdb_regs_to_regs(unsigned long *gdb_regs, struct pt_regs *regs)
138 regs->r0 = gdb_regs[BFIN_R0];
139 regs->r1 = gdb_regs[BFIN_R1];
140 regs->r2 = gdb_regs[BFIN_R2];
141 regs->r3 = gdb_regs[BFIN_R3];
142 regs->r4 = gdb_regs[BFIN_R4];
143 regs->r5 = gdb_regs[BFIN_R5];
144 regs->r6 = gdb_regs[BFIN_R6];
145 regs->r7 = gdb_regs[BFIN_R7];
146 regs->p0 = gdb_regs[BFIN_P0];
147 regs->p1 = gdb_regs[BFIN_P1];
148 regs->p2 = gdb_regs[BFIN_P2];
149 regs->p3 = gdb_regs[BFIN_P3];
150 regs->p4 = gdb_regs[BFIN_P4];
151 regs->p5 = gdb_regs[BFIN_P5];
152 regs->fp = gdb_regs[BFIN_FP];
153 regs->i0 = gdb_regs[BFIN_I0];
154 regs->i1 = gdb_regs[BFIN_I1];
155 regs->i2 = gdb_regs[BFIN_I2];
156 regs->i3 = gdb_regs[BFIN_I3];
157 regs->m0 = gdb_regs[BFIN_M0];
158 regs->m1 = gdb_regs[BFIN_M1];
159 regs->m2 = gdb_regs[BFIN_M2];
160 regs->m3 = gdb_regs[BFIN_M3];
161 regs->b0 = gdb_regs[BFIN_B0];
162 regs->b1 = gdb_regs[BFIN_B1];
163 regs->b2 = gdb_regs[BFIN_B2];
164 regs->b3 = gdb_regs[BFIN_B3];
165 regs->l0 = gdb_regs[BFIN_L0];
166 regs->l1 = gdb_regs[BFIN_L1];
167 regs->l2 = gdb_regs[BFIN_L2];
168 regs->l3 = gdb_regs[BFIN_L3];
169 regs->a0x = gdb_regs[BFIN_A0_DOT_X];
170 regs->a0w = gdb_regs[BFIN_A0_DOT_W];
171 regs->a1x = gdb_regs[BFIN_A1_DOT_X];
172 regs->a1w = gdb_regs[BFIN_A1_DOT_W];
173 regs->rets = gdb_regs[BFIN_RETS];
174 regs->lc0 = gdb_regs[BFIN_LC0];
175 regs->lt0 = gdb_regs[BFIN_LT0];
176 regs->lb0 = gdb_regs[BFIN_LB0];
177 regs->lc1 = gdb_regs[BFIN_LC1];
178 regs->lt1 = gdb_regs[BFIN_LT1];
179 regs->lb1 = gdb_regs[BFIN_LB1];
180 regs->usp = gdb_regs[BFIN_USP];
181 regs->syscfg = gdb_regs[BFIN_SYSCFG];
182 regs->retx = gdb_regs[BFIN_PC];
183 regs->retn = gdb_regs[BFIN_RETN];
184 regs->rete = gdb_regs[BFIN_RETE];
185 regs->pc = gdb_regs[BFIN_PC];
187 #if 0 /* can't change these */
188 regs->astat = gdb_regs[BFIN_ASTAT];
189 regs->seqstat = gdb_regs[BFIN_SEQSTAT];
190 regs->ipend = gdb_regs[BFIN_IPEND];
194 struct hw_breakpoint {
195 unsigned int occupied:1;
197 unsigned int enabled:1;
199 unsigned int dataacc:2;
200 unsigned short count;
202 } breakinfo[HW_BREAKPOINT_NUM];
204 int kgdb_arch_init(void)
206 kgdb_remove_all_hw_break();
210 int kgdb_set_hw_break(unsigned long addr)
213 for (breakno = 0; breakno < HW_BREAKPOINT_NUM; breakno++)
214 if (!breakinfo[breakno].occupied) {
215 breakinfo[breakno].occupied = 1;
216 breakinfo[breakno].enabled = 1;
217 breakinfo[breakno].type = 1;
218 breakinfo[breakno].addr = addr;
225 int kgdb_remove_hw_break(unsigned long addr)
228 for (breakno = 0; breakno < HW_BREAKPOINT_NUM; breakno++)
229 if (breakinfo[breakno].addr == addr)
230 memset(&(breakinfo[breakno]), 0, sizeof(struct hw_breakpoint));
235 void kgdb_remove_all_hw_break(void)
237 memset(breakinfo, 0, sizeof(struct hw_breakpoint)*8);
241 void kgdb_show_info(void)
243 printk(KERN_DEBUG "hwd: wpia0=0x%x, wpiacnt0=%d, wpiactl=0x%x, wpstat=0x%x\n",
244 bfin_read_WPIA0(), bfin_read_WPIACNT0(),
245 bfin_read_WPIACTL(), bfin_read_WPSTAT());
249 void kgdb_correct_hw_break(void)
253 uint32_t wpdactl = bfin_read_WPDACTL();
256 for (breakno = 0; breakno < HW_BREAKPOINT_NUM; breakno++) {
257 if (breakinfo[breakno].type == 1) {
260 if (breakinfo[breakno].enabled && !(wpdactl & WPIAEN0)) {
262 wpdactl &= ~(WPIREN01|EMUSW0);
263 wpdactl |= WPIAEN0|WPICNTEN0;
264 bfin_write_WPIA0(breakinfo[breakno].addr);
265 bfin_write_WPIACNT0(breakinfo[breakno].skip);
266 } else if (!breakinfo[breakno].enabled && (wpdactl & WPIAEN0)) {
273 if (breakinfo[breakno].enabled && !(wpdactl & WPIAEN1)) {
275 wpdactl &= ~(WPIREN01|EMUSW1);
276 wpdactl |= WPIAEN1|WPICNTEN1;
277 bfin_write_WPIA1(breakinfo[breakno].addr);
278 bfin_write_WPIACNT1(breakinfo[breakno].skip);
279 } else if (!breakinfo[breakno].enabled && (wpdactl & WPIAEN1)) {
286 if (breakinfo[breakno].enabled && !(wpdactl & WPIAEN2)) {
288 wpdactl &= ~(WPIREN23|EMUSW2);
289 wpdactl |= WPIAEN2|WPICNTEN2;
290 bfin_write_WPIA2(breakinfo[breakno].addr);
291 bfin_write_WPIACNT2(breakinfo[breakno].skip);
292 } else if (!breakinfo[breakno].enabled && (wpdactl & WPIAEN2)) {
299 if (breakinfo[breakno].enabled && !(wpdactl & WPIAEN3)) {
301 wpdactl &= ~(WPIREN23|EMUSW3);
302 wpdactl |= WPIAEN3|WPICNTEN3;
303 bfin_write_WPIA3(breakinfo[breakno].addr);
304 bfin_write_WPIACNT3(breakinfo[breakno].skip);
305 } else if (!breakinfo[breakno].enabled && (wpdactl & WPIAEN3)) {
311 if (breakinfo[breakno].enabled && !(wpdactl & WPIAEN4)) {
313 wpdactl &= ~(WPIREN45|EMUSW4);
314 wpdactl |= WPIAEN4|WPICNTEN4;
315 bfin_write_WPIA4(breakinfo[breakno].addr);
316 bfin_write_WPIACNT4(breakinfo[breakno].skip);
317 } else if (!breakinfo[breakno].enabled && (wpdactl & WPIAEN4)) {
323 if (breakinfo[breakno].enabled && !(wpdactl & WPIAEN5)) {
325 wpdactl &= ~(WPIREN45|EMUSW5);
326 wpdactl |= WPIAEN5|WPICNTEN5;
327 bfin_write_WPIA5(breakinfo[breakno].addr);
328 bfin_write_WPIACNT5(breakinfo[breakno].skip);
329 } else if (!breakinfo[breakno].enabled && (wpdactl & WPIAEN5)) {
340 /*printk("correct_hw_break: wpdactl=0x%x\n", wpdactl);*/
341 bfin_write_WPDACTL(wpdactl);
343 /*kgdb_show_info();*/
347 void kgdb_disable_hw_debug(struct pt_regs *regs)
349 /* Disable hardware debugging while we are in kgdb */
350 bfin_write_WPIACTL(bfin_read_WPIACTL() & ~0x1);
354 void kgdb_post_master_code(struct pt_regs *regs, int eVector, int err_code)
356 /* Master processor is completely in the debugger */
357 gdb_bf533vector = eVector;
358 gdb_bf533errcode = err_code;
361 int kgdb_arch_handle_exception(int exceptionVector, int signo,
362 int err_code, char *remcom_in_buffer,
363 char *remcom_out_buffer,
364 struct pt_regs *linux_regs)
372 switch (remcom_in_buffer[0]) {
375 if (kgdb_contthread && kgdb_contthread != current) {
376 strcpy(remcom_out_buffer, "E00");
380 kgdb_contthread = NULL;
382 /* try to read optional parameter, pc unchanged if no parm */
383 ptr = &remcom_in_buffer[1];
384 if (kgdb_hex2long(&ptr, &addr)) {
385 linux_regs->retx = addr;
387 newPC = linux_regs->retx;
389 /* clear the trace bit */
390 linux_regs->syscfg &= 0xfffffffe;
392 /* set the trace bit if we're stepping */
393 if (remcom_in_buffer[0] == 's') {
394 linux_regs->syscfg |= 0x1;
398 wp_status = bfin_read_WPSTAT();
401 if (exceptionVector == VEC_WATCH) {
402 for (breakno = 0; breakno < 6; ++breakno) {
403 if (wp_status & (1 << breakno)) {
409 kgdb_correct_hw_break();
411 bfin_write_WPSTAT(0);
415 return -1; /* this means that we do not want to exit from the handler */
418 struct kgdb_arch arch_kgdb_ops = {
419 .gdb_bpt_instr = {0xa1},
420 .flags = KGDB_HW_BREAKPOINT,