Merge branch 'fb' into devel
[linux-2.6] / drivers / i2c / busses / i2c-ibm_iic.c
1 /*
2  * drivers/i2c/busses/i2c-ibm_iic.c
3  *
4  * Support for the IIC peripheral on IBM PPC 4xx
5  *
6  * Copyright (c) 2003, 2004 Zultys Technologies.
7  * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
8  *
9  * Copyright (c) 2008 PIKA Technologies
10  * Sean MacLennan <smaclennan@pikatech.com>
11  *
12  * Based on original work by
13  *      Ian DaSilva  <idasilva@mvista.com>
14  *      Armin Kuster <akuster@mvista.com>
15  *      Matt Porter  <mporter@mvista.com>
16  *
17  *      Copyright 2000-2003 MontaVista Software Inc.
18  *
19  * Original driver version was highly leveraged from i2c-elektor.c
20  *
21  *      Copyright 1995-97 Simon G. Vogl
22  *                1998-99 Hans Berglund
23  *
24  *      With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi>
25  *      and even Frodo Looijaard <frodol@dds.nl>
26  *
27  * This program is free software; you can redistribute  it and/or modify it
28  * under  the terms of  the GNU General  Public License as published by the
29  * Free Software Foundation;  either version 2 of the  License, or (at your
30  * option) any later version.
31  *
32  */
33
34 #include <linux/module.h>
35 #include <linux/kernel.h>
36 #include <linux/ioport.h>
37 #include <linux/delay.h>
38 #include <linux/slab.h>
39 #include <linux/init.h>
40 #include <linux/interrupt.h>
41 #include <asm/irq.h>
42 #include <asm/io.h>
43 #include <linux/i2c.h>
44 #include <linux/i2c-id.h>
45
46 #ifdef CONFIG_IBM_OCP
47 #include <asm/ocp.h>
48 #include <asm/ibm4xx.h>
49 #else
50 #include <linux/of_platform.h>
51 #endif
52
53 #include "i2c-ibm_iic.h"
54
55 #define DRIVER_VERSION "2.2"
56
57 MODULE_DESCRIPTION("IBM IIC driver v" DRIVER_VERSION);
58 MODULE_LICENSE("GPL");
59
60 static int iic_force_poll;
61 module_param(iic_force_poll, bool, 0);
62 MODULE_PARM_DESC(iic_force_poll, "Force polling mode");
63
64 static int iic_force_fast;
65 module_param(iic_force_fast, bool, 0);
66 MODULE_PARM_DESC(iic_force_fast, "Force fast mode (400 kHz)");
67
68 #define DBG_LEVEL 0
69
70 #ifdef DBG
71 #undef DBG
72 #endif
73
74 #ifdef DBG2
75 #undef DBG2
76 #endif
77
78 #if DBG_LEVEL > 0
79 #  define DBG(f,x...)   printk(KERN_DEBUG "ibm-iic" f, ##x)
80 #else
81 #  define DBG(f,x...)   ((void)0)
82 #endif
83 #if DBG_LEVEL > 1
84 #  define DBG2(f,x...)  DBG(f, ##x)
85 #else
86 #  define DBG2(f,x...)  ((void)0)
87 #endif
88 #if DBG_LEVEL > 2
89 static void dump_iic_regs(const char* header, struct ibm_iic_private* dev)
90 {
91         volatile struct iic_regs __iomem *iic = dev->vaddr;
92         printk(KERN_DEBUG "ibm-iic%d: %s\n", dev->idx, header);
93         printk(KERN_DEBUG "  cntl     = 0x%02x, mdcntl = 0x%02x\n"
94                KERN_DEBUG "  sts      = 0x%02x, extsts = 0x%02x\n"
95                KERN_DEBUG "  clkdiv   = 0x%02x, xfrcnt = 0x%02x\n"
96                KERN_DEBUG "  xtcntlss = 0x%02x, directcntl = 0x%02x\n",
97                 in_8(&iic->cntl), in_8(&iic->mdcntl), in_8(&iic->sts),
98                 in_8(&iic->extsts), in_8(&iic->clkdiv), in_8(&iic->xfrcnt),
99                 in_8(&iic->xtcntlss), in_8(&iic->directcntl));
100 }
101 #  define DUMP_REGS(h,dev)      dump_iic_regs((h),(dev))
102 #else
103 #  define DUMP_REGS(h,dev)      ((void)0)
104 #endif
105
106 /* Bus timings (in ns) for bit-banging */
107 static struct i2c_timings {
108         unsigned int hd_sta;
109         unsigned int su_sto;
110         unsigned int low;
111         unsigned int high;
112         unsigned int buf;
113 } timings [] = {
114 /* Standard mode (100 KHz) */
115 {
116         .hd_sta = 4000,
117         .su_sto = 4000,
118         .low    = 4700,
119         .high   = 4000,
120         .buf    = 4700,
121 },
122 /* Fast mode (400 KHz) */
123 {
124         .hd_sta = 600,
125         .su_sto = 600,
126         .low    = 1300,
127         .high   = 600,
128         .buf    = 1300,
129 }};
130
131 /* Enable/disable interrupt generation */
132 static inline void iic_interrupt_mode(struct ibm_iic_private* dev, int enable)
133 {
134         out_8(&dev->vaddr->intmsk, enable ? INTRMSK_EIMTC : 0);
135 }
136
137 /*
138  * Initialize IIC interface.
139  */
140 static void iic_dev_init(struct ibm_iic_private* dev)
141 {
142         volatile struct iic_regs __iomem *iic = dev->vaddr;
143
144         DBG("%d: init\n", dev->idx);
145
146         /* Clear master address */
147         out_8(&iic->lmadr, 0);
148         out_8(&iic->hmadr, 0);
149
150         /* Clear slave address */
151         out_8(&iic->lsadr, 0);
152         out_8(&iic->hsadr, 0);
153
154         /* Clear status & extended status */
155         out_8(&iic->sts, STS_SCMP | STS_IRQA);
156         out_8(&iic->extsts, EXTSTS_IRQP | EXTSTS_IRQD | EXTSTS_LA
157                             | EXTSTS_ICT | EXTSTS_XFRA);
158
159         /* Set clock divider */
160         out_8(&iic->clkdiv, dev->clckdiv);
161
162         /* Clear transfer count */
163         out_8(&iic->xfrcnt, 0);
164
165         /* Clear extended control and status */
166         out_8(&iic->xtcntlss, XTCNTLSS_SRC | XTCNTLSS_SRS | XTCNTLSS_SWC
167                             | XTCNTLSS_SWS);
168
169         /* Clear control register */
170         out_8(&iic->cntl, 0);
171
172         /* Enable interrupts if possible */
173         iic_interrupt_mode(dev, dev->irq >= 0);
174
175         /* Set mode control */
176         out_8(&iic->mdcntl, MDCNTL_FMDB | MDCNTL_EINT | MDCNTL_EUBS
177                             | (dev->fast_mode ? MDCNTL_FSM : 0));
178
179         DUMP_REGS("iic_init", dev);
180 }
181
182 /*
183  * Reset IIC interface
184  */
185 static void iic_dev_reset(struct ibm_iic_private* dev)
186 {
187         volatile struct iic_regs __iomem *iic = dev->vaddr;
188         int i;
189         u8 dc;
190
191         DBG("%d: soft reset\n", dev->idx);
192         DUMP_REGS("reset", dev);
193
194         /* Place chip in the reset state */
195         out_8(&iic->xtcntlss, XTCNTLSS_SRST);
196
197         /* Check if bus is free */
198         dc = in_8(&iic->directcntl);
199         if (!DIRCTNL_FREE(dc)){
200                 DBG("%d: trying to regain bus control\n", dev->idx);
201
202                 /* Try to set bus free state */
203                 out_8(&iic->directcntl, DIRCNTL_SDAC | DIRCNTL_SCC);
204
205                 /* Wait until we regain bus control */
206                 for (i = 0; i < 100; ++i){
207                         dc = in_8(&iic->directcntl);
208                         if (DIRCTNL_FREE(dc))
209                                 break;
210
211                         /* Toggle SCL line */
212                         dc ^= DIRCNTL_SCC;
213                         out_8(&iic->directcntl, dc);
214                         udelay(10);
215                         dc ^= DIRCNTL_SCC;
216                         out_8(&iic->directcntl, dc);
217
218                         /* be nice */
219                         cond_resched();
220                 }
221         }
222
223         /* Remove reset */
224         out_8(&iic->xtcntlss, 0);
225
226         /* Reinitialize interface */
227         iic_dev_init(dev);
228 }
229
230 /*
231  * Do 0-length transaction using bit-banging through IIC_DIRECTCNTL register.
232  */
233
234 /* Wait for SCL and/or SDA to be high */
235 static int iic_dc_wait(volatile struct iic_regs __iomem *iic, u8 mask)
236 {
237         unsigned long x = jiffies + HZ / 28 + 2;
238         while ((in_8(&iic->directcntl) & mask) != mask){
239                 if (unlikely(time_after(jiffies, x)))
240                         return -1;
241                 cond_resched();
242         }
243         return 0;
244 }
245
246 static int iic_smbus_quick(struct ibm_iic_private* dev, const struct i2c_msg* p)
247 {
248         volatile struct iic_regs __iomem *iic = dev->vaddr;
249         const struct i2c_timings* t = &timings[dev->fast_mode ? 1 : 0];
250         u8 mask, v, sda;
251         int i, res;
252
253         /* Only 7-bit addresses are supported */
254         if (unlikely(p->flags & I2C_M_TEN)){
255                 DBG("%d: smbus_quick - 10 bit addresses are not supported\n",
256                         dev->idx);
257                 return -EINVAL;
258         }
259
260         DBG("%d: smbus_quick(0x%02x)\n", dev->idx, p->addr);
261
262         /* Reset IIC interface */
263         out_8(&iic->xtcntlss, XTCNTLSS_SRST);
264
265         /* Wait for bus to become free */
266         out_8(&iic->directcntl, DIRCNTL_SDAC | DIRCNTL_SCC);
267         if (unlikely(iic_dc_wait(iic, DIRCNTL_MSDA | DIRCNTL_MSC)))
268                 goto err;
269         ndelay(t->buf);
270
271         /* START */
272         out_8(&iic->directcntl, DIRCNTL_SCC);
273         sda = 0;
274         ndelay(t->hd_sta);
275
276         /* Send address */
277         v = (u8)((p->addr << 1) | ((p->flags & I2C_M_RD) ? 1 : 0));
278         for (i = 0, mask = 0x80; i < 8; ++i, mask >>= 1){
279                 out_8(&iic->directcntl, sda);
280                 ndelay(t->low / 2);
281                 sda = (v & mask) ? DIRCNTL_SDAC : 0;
282                 out_8(&iic->directcntl, sda);
283                 ndelay(t->low / 2);
284
285                 out_8(&iic->directcntl, DIRCNTL_SCC | sda);
286                 if (unlikely(iic_dc_wait(iic, DIRCNTL_MSC)))
287                         goto err;
288                 ndelay(t->high);
289         }
290
291         /* ACK */
292         out_8(&iic->directcntl, sda);
293         ndelay(t->low / 2);
294         out_8(&iic->directcntl, DIRCNTL_SDAC);
295         ndelay(t->low / 2);
296         out_8(&iic->directcntl, DIRCNTL_SDAC | DIRCNTL_SCC);
297         if (unlikely(iic_dc_wait(iic, DIRCNTL_MSC)))
298                 goto err;
299         res = (in_8(&iic->directcntl) & DIRCNTL_MSDA) ? -EREMOTEIO : 1;
300         ndelay(t->high);
301
302         /* STOP */
303         out_8(&iic->directcntl, 0);
304         ndelay(t->low);
305         out_8(&iic->directcntl, DIRCNTL_SCC);
306         if (unlikely(iic_dc_wait(iic, DIRCNTL_MSC)))
307                 goto err;
308         ndelay(t->su_sto);
309         out_8(&iic->directcntl, DIRCNTL_SDAC | DIRCNTL_SCC);
310
311         ndelay(t->buf);
312
313         DBG("%d: smbus_quick -> %s\n", dev->idx, res ? "NACK" : "ACK");
314 out:
315         /* Remove reset */
316         out_8(&iic->xtcntlss, 0);
317
318         /* Reinitialize interface */
319         iic_dev_init(dev);
320
321         return res;
322 err:
323         DBG("%d: smbus_quick - bus is stuck\n", dev->idx);
324         res = -EREMOTEIO;
325         goto out;
326 }
327
328 /*
329  * IIC interrupt handler
330  */
331 static irqreturn_t iic_handler(int irq, void *dev_id)
332 {
333         struct ibm_iic_private* dev = (struct ibm_iic_private*)dev_id;
334         volatile struct iic_regs __iomem *iic = dev->vaddr;
335
336         DBG2("%d: irq handler, STS = 0x%02x, EXTSTS = 0x%02x\n",
337              dev->idx, in_8(&iic->sts), in_8(&iic->extsts));
338
339         /* Acknowledge IRQ and wakeup iic_wait_for_tc */
340         out_8(&iic->sts, STS_IRQA | STS_SCMP);
341         wake_up_interruptible(&dev->wq);
342
343         return IRQ_HANDLED;
344 }
345
346 /*
347  * Get master transfer result and clear errors if any.
348  * Returns the number of actually transferred bytes or error (<0)
349  */
350 static int iic_xfer_result(struct ibm_iic_private* dev)
351 {
352         volatile struct iic_regs __iomem *iic = dev->vaddr;
353
354         if (unlikely(in_8(&iic->sts) & STS_ERR)){
355                 DBG("%d: xfer error, EXTSTS = 0x%02x\n", dev->idx,
356                         in_8(&iic->extsts));
357
358                 /* Clear errors and possible pending IRQs */
359                 out_8(&iic->extsts, EXTSTS_IRQP | EXTSTS_IRQD |
360                         EXTSTS_LA | EXTSTS_ICT | EXTSTS_XFRA);
361
362                 /* Flush master data buffer */
363                 out_8(&iic->mdcntl, in_8(&iic->mdcntl) | MDCNTL_FMDB);
364
365                 /* Is bus free?
366                  * If error happened during combined xfer
367                  * IIC interface is usually stuck in some strange
368                  * state, the only way out - soft reset.
369                  */
370                 if ((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE){
371                         DBG("%d: bus is stuck, resetting\n", dev->idx);
372                         iic_dev_reset(dev);
373                 }
374                 return -EREMOTEIO;
375         }
376         else
377                 return in_8(&iic->xfrcnt) & XFRCNT_MTC_MASK;
378 }
379
380 /*
381  * Try to abort active transfer.
382  */
383 static void iic_abort_xfer(struct ibm_iic_private* dev)
384 {
385         volatile struct iic_regs __iomem *iic = dev->vaddr;
386         unsigned long x;
387
388         DBG("%d: iic_abort_xfer\n", dev->idx);
389
390         out_8(&iic->cntl, CNTL_HMT);
391
392         /*
393          * Wait for the abort command to complete.
394          * It's not worth to be optimized, just poll (timeout >= 1 tick)
395          */
396         x = jiffies + 2;
397         while ((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE){
398                 if (time_after(jiffies, x)){
399                         DBG("%d: abort timeout, resetting...\n", dev->idx);
400                         iic_dev_reset(dev);
401                         return;
402                 }
403                 schedule();
404         }
405
406         /* Just to clear errors */
407         iic_xfer_result(dev);
408 }
409
410 /*
411  * Wait for master transfer to complete.
412  * It puts current process to sleep until we get interrupt or timeout expires.
413  * Returns the number of transferred bytes or error (<0)
414  */
415 static int iic_wait_for_tc(struct ibm_iic_private* dev){
416
417         volatile struct iic_regs __iomem *iic = dev->vaddr;
418         int ret = 0;
419
420         if (dev->irq >= 0){
421                 /* Interrupt mode */
422                 ret = wait_event_interruptible_timeout(dev->wq,
423                         !(in_8(&iic->sts) & STS_PT), dev->adap.timeout * HZ);
424
425                 if (unlikely(ret < 0))
426                         DBG("%d: wait interrupted\n", dev->idx);
427                 else if (unlikely(in_8(&iic->sts) & STS_PT)){
428                         DBG("%d: wait timeout\n", dev->idx);
429                         ret = -ETIMEDOUT;
430                 }
431         }
432         else {
433                 /* Polling mode */
434                 unsigned long x = jiffies + dev->adap.timeout * HZ;
435
436                 while (in_8(&iic->sts) & STS_PT){
437                         if (unlikely(time_after(jiffies, x))){
438                                 DBG("%d: poll timeout\n", dev->idx);
439                                 ret = -ETIMEDOUT;
440                                 break;
441                         }
442
443                         if (unlikely(signal_pending(current))){
444                                 DBG("%d: poll interrupted\n", dev->idx);
445                                 ret = -ERESTARTSYS;
446                                 break;
447                         }
448                         schedule();
449                 }
450         }
451
452         if (unlikely(ret < 0))
453                 iic_abort_xfer(dev);
454         else
455                 ret = iic_xfer_result(dev);
456
457         DBG2("%d: iic_wait_for_tc -> %d\n", dev->idx, ret);
458
459         return ret;
460 }
461
462 /*
463  * Low level master transfer routine
464  */
465 static int iic_xfer_bytes(struct ibm_iic_private* dev, struct i2c_msg* pm,
466                           int combined_xfer)
467 {
468         volatile struct iic_regs __iomem *iic = dev->vaddr;
469         char* buf = pm->buf;
470         int i, j, loops, ret = 0;
471         int len = pm->len;
472
473         u8 cntl = (in_8(&iic->cntl) & CNTL_AMD) | CNTL_PT;
474         if (pm->flags & I2C_M_RD)
475                 cntl |= CNTL_RW;
476
477         loops = (len + 3) / 4;
478         for (i = 0; i < loops; ++i, len -= 4){
479                 int count = len > 4 ? 4 : len;
480                 u8 cmd = cntl | ((count - 1) << CNTL_TCT_SHIFT);
481
482                 if (!(cntl & CNTL_RW))
483                         for (j = 0; j < count; ++j)
484                                 out_8((void __iomem *)&iic->mdbuf, *buf++);
485
486                 if (i < loops - 1)
487                         cmd |= CNTL_CHT;
488                 else if (combined_xfer)
489                         cmd |= CNTL_RPST;
490
491                 DBG2("%d: xfer_bytes, %d, CNTL = 0x%02x\n", dev->idx, count, cmd);
492
493                 /* Start transfer */
494                 out_8(&iic->cntl, cmd);
495
496                 /* Wait for completion */
497                 ret = iic_wait_for_tc(dev);
498
499                 if (unlikely(ret < 0))
500                         break;
501                 else if (unlikely(ret != count)){
502                         DBG("%d: xfer_bytes, requested %d, transfered %d\n",
503                                 dev->idx, count, ret);
504
505                         /* If it's not a last part of xfer, abort it */
506                         if (combined_xfer || (i < loops - 1))
507                                 iic_abort_xfer(dev);
508
509                         ret = -EREMOTEIO;
510                         break;
511                 }
512
513                 if (cntl & CNTL_RW)
514                         for (j = 0; j < count; ++j)
515                                 *buf++ = in_8((void __iomem *)&iic->mdbuf);
516         }
517
518         return ret > 0 ? 0 : ret;
519 }
520
521 /*
522  * Set target slave address for master transfer
523  */
524 static inline void iic_address(struct ibm_iic_private* dev, struct i2c_msg* msg)
525 {
526         volatile struct iic_regs __iomem *iic = dev->vaddr;
527         u16 addr = msg->addr;
528
529         DBG2("%d: iic_address, 0x%03x (%d-bit)\n", dev->idx,
530                 addr, msg->flags & I2C_M_TEN ? 10 : 7);
531
532         if (msg->flags & I2C_M_TEN){
533             out_8(&iic->cntl, CNTL_AMD);
534             out_8(&iic->lmadr, addr);
535             out_8(&iic->hmadr, 0xf0 | ((addr >> 7) & 0x06));
536         }
537         else {
538             out_8(&iic->cntl, 0);
539             out_8(&iic->lmadr, addr << 1);
540         }
541 }
542
543 static inline int iic_invalid_address(const struct i2c_msg* p)
544 {
545         return (p->addr > 0x3ff) || (!(p->flags & I2C_M_TEN) && (p->addr > 0x7f));
546 }
547
548 static inline int iic_address_neq(const struct i2c_msg* p1,
549                                   const struct i2c_msg* p2)
550 {
551         return (p1->addr != p2->addr)
552                 || ((p1->flags & I2C_M_TEN) != (p2->flags & I2C_M_TEN));
553 }
554
555 /*
556  * Generic master transfer entrypoint.
557  * Returns the number of processed messages or error (<0)
558  */
559 static int iic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
560 {
561         struct ibm_iic_private* dev = (struct ibm_iic_private*)(i2c_get_adapdata(adap));
562         volatile struct iic_regs __iomem *iic = dev->vaddr;
563         int i, ret = 0;
564
565         DBG2("%d: iic_xfer, %d msg(s)\n", dev->idx, num);
566
567         if (!num)
568                 return 0;
569
570         /* Check the sanity of the passed messages.
571          * Uhh, generic i2c layer is more suitable place for such code...
572          */
573         if (unlikely(iic_invalid_address(&msgs[0]))){
574                 DBG("%d: invalid address 0x%03x (%d-bit)\n", dev->idx,
575                         msgs[0].addr, msgs[0].flags & I2C_M_TEN ? 10 : 7);
576                 return -EINVAL;
577         }
578         for (i = 0; i < num; ++i){
579                 if (unlikely(msgs[i].len <= 0)){
580                         if (num == 1 && !msgs[0].len){
581                                 /* Special case for I2C_SMBUS_QUICK emulation.
582                                  * IBM IIC doesn't support 0-length transactions
583                                  * so we have to emulate them using bit-banging.
584                                  */
585                                 return iic_smbus_quick(dev, &msgs[0]);
586                         }
587                         DBG("%d: invalid len %d in msg[%d]\n", dev->idx,
588                                 msgs[i].len, i);
589                         return -EINVAL;
590                 }
591                 if (unlikely(iic_address_neq(&msgs[0], &msgs[i]))){
592                         DBG("%d: invalid addr in msg[%d]\n", dev->idx, i);
593                         return -EINVAL;
594                 }
595         }
596
597         /* Check bus state */
598         if (unlikely((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE)){
599                 DBG("%d: iic_xfer, bus is not free\n", dev->idx);
600
601                 /* Usually it means something serious has happend.
602                  * We *cannot* have unfinished previous transfer
603                  * so it doesn't make any sense to try to stop it.
604                  * Probably we were not able to recover from the
605                  * previous error.
606                  * The only *reasonable* thing I can think of here
607                  * is soft reset.  --ebs
608                  */
609                 iic_dev_reset(dev);
610
611                 if ((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE){
612                         DBG("%d: iic_xfer, bus is still not free\n", dev->idx);
613                         return -EREMOTEIO;
614                 }
615         }
616         else {
617                 /* Flush master data buffer (just in case) */
618                 out_8(&iic->mdcntl, in_8(&iic->mdcntl) | MDCNTL_FMDB);
619         }
620
621         /* Load slave address */
622         iic_address(dev, &msgs[0]);
623
624         /* Do real transfer */
625         for (i = 0; i < num && !ret; ++i)
626                 ret = iic_xfer_bytes(dev, &msgs[i], i < num - 1);
627
628         return ret < 0 ? ret : num;
629 }
630
631 static u32 iic_func(struct i2c_adapter *adap)
632 {
633         return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR;
634 }
635
636 static const struct i2c_algorithm iic_algo = {
637         .master_xfer    = iic_xfer,
638         .functionality  = iic_func
639 };
640
641 /*
642  * Calculates IICx_CLCKDIV value for a specific OPB clock frequency
643  */
644 static inline u8 iic_clckdiv(unsigned int opb)
645 {
646         /* Compatibility kludge, should go away after all cards
647          * are fixed to fill correct value for opbfreq.
648          * Previous driver version used hardcoded divider value 4,
649          * it corresponds to OPB frequency from the range (40, 50] MHz
650          */
651         if (!opb){
652                 printk(KERN_WARNING "ibm-iic: using compatibility value for OPB freq,"
653                         " fix your board specific setup\n");
654                 opb = 50000000;
655         }
656
657         /* Convert to MHz */
658         opb /= 1000000;
659
660         if (opb < 20 || opb > 150){
661                 printk(KERN_WARNING "ibm-iic: invalid OPB clock frequency %u MHz\n",
662                         opb);
663                 opb = opb < 20 ? 20 : 150;
664         }
665         return (u8)((opb + 9) / 10 - 1);
666 }
667
668 #ifdef CONFIG_IBM_OCP
669 /*
670  * Register single IIC interface
671  */
672 static int __devinit iic_probe(struct ocp_device *ocp){
673
674         struct ibm_iic_private* dev;
675         struct i2c_adapter* adap;
676         struct ocp_func_iic_data* iic_data = ocp->def->additions;
677         int ret;
678
679         if (!iic_data)
680                 printk(KERN_WARNING"ibm-iic%d: missing additional data!\n",
681                         ocp->def->index);
682
683         if (!(dev = kzalloc(sizeof(*dev), GFP_KERNEL))) {
684                 printk(KERN_ERR "ibm-iic%d: failed to allocate device data\n",
685                         ocp->def->index);
686                 return -ENOMEM;
687         }
688
689         dev->idx = ocp->def->index;
690         ocp_set_drvdata(ocp, dev);
691
692         if (!request_mem_region(ocp->def->paddr, sizeof(struct iic_regs),
693                                 "ibm_iic")) {
694                 ret = -EBUSY;
695                 goto fail1;
696         }
697
698         if (!(dev->vaddr = ioremap(ocp->def->paddr, sizeof(struct iic_regs)))){
699                 printk(KERN_ERR "ibm-iic%d: failed to ioremap device registers\n",
700                         dev->idx);
701                 ret = -ENXIO;
702                 goto fail2;
703         }
704
705         init_waitqueue_head(&dev->wq);
706
707         dev->irq = iic_force_poll ? -1 : ocp->def->irq;
708         if (dev->irq >= 0){
709                 /* Disable interrupts until we finish initialization,
710                    assumes level-sensitive IRQ setup...
711                  */
712                 iic_interrupt_mode(dev, 0);
713                 if (request_irq(dev->irq, iic_handler, 0, "IBM IIC", dev)){
714                         printk(KERN_ERR "ibm-iic%d: request_irq %d failed\n",
715                                 dev->idx, dev->irq);
716                         /* Fallback to the polling mode */
717                         dev->irq = -1;
718                 }
719         }
720
721         if (dev->irq < 0)
722                 printk(KERN_WARNING "ibm-iic%d: using polling mode\n",
723                         dev->idx);
724
725         /* Board specific settings */
726         dev->fast_mode = iic_force_fast ? 1 : (iic_data ? iic_data->fast_mode : 0);
727
728         /* clckdiv is the same for *all* IIC interfaces,
729          * but I'd rather make a copy than introduce another global. --ebs
730          */
731         dev->clckdiv = iic_clckdiv(ocp_sys_info.opb_bus_freq);
732         DBG("%d: clckdiv = %d\n", dev->idx, dev->clckdiv);
733
734         /* Initialize IIC interface */
735         iic_dev_init(dev);
736
737         /* Register it with i2c layer */
738         adap = &dev->adap;
739         adap->dev.parent = &ocp->dev;
740         strcpy(adap->name, "IBM IIC");
741         i2c_set_adapdata(adap, dev);
742         adap->id = I2C_HW_OCP;
743         adap->class = I2C_CLASS_HWMON;
744         adap->algo = &iic_algo;
745         adap->client_register = NULL;
746         adap->client_unregister = NULL;
747         adap->timeout = 1;
748
749         /*
750          * If "dev->idx" is negative we consider it as zero.
751          * The reason to do so is to avoid sysfs names that only make
752          * sense when there are multiple adapters.
753          */
754         adap->nr = dev->idx >= 0 ? dev->idx : 0;
755
756         if ((ret = i2c_add_numbered_adapter(adap)) < 0) {
757                 printk(KERN_ERR "ibm-iic%d: failed to register i2c adapter\n",
758                         dev->idx);
759                 goto fail;
760         }
761
762         printk(KERN_INFO "ibm-iic%d: using %s mode\n", dev->idx,
763                 dev->fast_mode ? "fast (400 kHz)" : "standard (100 kHz)");
764
765         return 0;
766
767 fail:
768         if (dev->irq >= 0){
769                 iic_interrupt_mode(dev, 0);
770                 free_irq(dev->irq, dev);
771         }
772
773         iounmap(dev->vaddr);
774 fail2:
775         release_mem_region(ocp->def->paddr, sizeof(struct iic_regs));
776 fail1:
777         ocp_set_drvdata(ocp, NULL);
778         kfree(dev);
779         return ret;
780 }
781
782 /*
783  * Cleanup initialized IIC interface
784  */
785 static void __devexit iic_remove(struct ocp_device *ocp)
786 {
787         struct ibm_iic_private* dev = (struct ibm_iic_private*)ocp_get_drvdata(ocp);
788         BUG_ON(dev == NULL);
789         if (i2c_del_adapter(&dev->adap)){
790                 printk(KERN_ERR "ibm-iic%d: failed to delete i2c adapter :(\n",
791                         dev->idx);
792                 /* That's *very* bad, just shutdown IRQ ... */
793                 if (dev->irq >= 0){
794                     iic_interrupt_mode(dev, 0);
795                     free_irq(dev->irq, dev);
796                     dev->irq = -1;
797                 }
798         } else {
799                 if (dev->irq >= 0){
800                     iic_interrupt_mode(dev, 0);
801                     free_irq(dev->irq, dev);
802                 }
803                 iounmap(dev->vaddr);
804                 release_mem_region(ocp->def->paddr, sizeof(struct iic_regs));
805                 kfree(dev);
806         }
807 }
808
809 static struct ocp_device_id ibm_iic_ids[] __devinitdata =
810 {
811         { .vendor = OCP_VENDOR_IBM, .function = OCP_FUNC_IIC },
812         { .vendor = OCP_VENDOR_INVALID }
813 };
814
815 MODULE_DEVICE_TABLE(ocp, ibm_iic_ids);
816
817 static struct ocp_driver ibm_iic_driver =
818 {
819         .name           = "iic",
820         .id_table       = ibm_iic_ids,
821         .probe          = iic_probe,
822         .remove         = __devexit_p(iic_remove),
823 #if defined(CONFIG_PM)
824         .suspend        = NULL,
825         .resume         = NULL,
826 #endif
827 };
828
829 static int __init iic_init(void)
830 {
831         printk(KERN_INFO "IBM IIC driver v" DRIVER_VERSION "\n");
832         return ocp_register_driver(&ibm_iic_driver);
833 }
834
835 static void __exit iic_exit(void)
836 {
837         ocp_unregister_driver(&ibm_iic_driver);
838 }
839
840 #else  /* !CONFIG_IBM_OCP */
841
842 static int __devinit iic_request_irq(struct of_device *ofdev,
843                                      struct ibm_iic_private *dev)
844 {
845         struct device_node *np = ofdev->node;
846         int irq;
847
848         if (iic_force_poll)
849                 return NO_IRQ;
850
851         irq = irq_of_parse_and_map(np, 0);
852         if (irq == NO_IRQ) {
853                 dev_err(&ofdev->dev, "irq_of_parse_and_map failed\n");
854                 return NO_IRQ;
855         }
856
857         /* Disable interrupts until we finish initialization, assumes
858          *  level-sensitive IRQ setup...
859          */
860         iic_interrupt_mode(dev, 0);
861         if (request_irq(irq, iic_handler, 0, "IBM IIC", dev)) {
862                 dev_err(&ofdev->dev, "request_irq %d failed\n", irq);
863                 /* Fallback to the polling mode */
864                 return NO_IRQ;
865         }
866
867         return irq;
868 }
869
870 /*
871  * Register single IIC interface
872  */
873 static int __devinit iic_probe(struct of_device *ofdev,
874                                const struct of_device_id *match)
875 {
876         struct device_node *np = ofdev->node;
877         struct ibm_iic_private *dev;
878         struct i2c_adapter *adap;
879         const u32 *indexp, *freq;
880         int ret;
881
882         dev = kzalloc(sizeof(*dev), GFP_KERNEL);
883         if (!dev) {
884                 dev_err(&ofdev->dev, "failed to allocate device data\n");
885                 return -ENOMEM;
886         }
887
888         dev_set_drvdata(&ofdev->dev, dev);
889
890         indexp = of_get_property(np, "index", NULL);
891         if (!indexp) {
892                 dev_err(&ofdev->dev, "no index specified\n");
893                 ret = -EINVAL;
894                 goto error_cleanup;
895         }
896         dev->idx = *indexp;
897
898         dev->vaddr = of_iomap(np, 0);
899         if (dev->vaddr == NULL) {
900                 dev_err(&ofdev->dev, "failed to iomap device\n");
901                 ret = -ENXIO;
902                 goto error_cleanup;
903         }
904
905         init_waitqueue_head(&dev->wq);
906
907         dev->irq = iic_request_irq(ofdev, dev);
908         if (dev->irq == NO_IRQ)
909                 dev_warn(&ofdev->dev, "using polling mode\n");
910
911         /* Board specific settings */
912         if (iic_force_fast || of_get_property(np, "fast-mode", NULL))
913                 dev->fast_mode = 1;
914
915         freq = of_get_property(np, "clock-frequency", NULL);
916         if (freq == NULL) {
917                 freq = of_get_property(np->parent, "clock-frequency", NULL);
918                 if (freq == NULL) {
919                         dev_err(&ofdev->dev, "Unable to get bus frequency\n");
920                         ret = -EINVAL;
921                         goto error_cleanup;
922                 }
923         }
924
925         dev->clckdiv = iic_clckdiv(*freq);
926         dev_dbg(&ofdev->dev, "clckdiv = %d\n", dev->clckdiv);
927
928         /* Initialize IIC interface */
929         iic_dev_init(dev);
930
931         /* Register it with i2c layer */
932         adap = &dev->adap;
933         adap->dev.parent = &ofdev->dev;
934         strlcpy(adap->name, "IBM IIC", sizeof(adap->name));
935         i2c_set_adapdata(adap, dev);
936         adap->id = I2C_HW_OCP;
937         adap->class = I2C_CLASS_HWMON;
938         adap->algo = &iic_algo;
939         adap->timeout = 1;
940         adap->nr = dev->idx;
941
942         ret = i2c_add_numbered_adapter(adap);
943         if (ret  < 0) {
944                 dev_err(&ofdev->dev, "failed to register i2c adapter\n");
945                 goto error_cleanup;
946         }
947
948         dev_info(&ofdev->dev, "using %s mode\n",
949                  dev->fast_mode ? "fast (400 kHz)" : "standard (100 kHz)");
950
951         return 0;
952
953 error_cleanup:
954         if (dev->irq != NO_IRQ) {
955                 iic_interrupt_mode(dev, 0);
956                 free_irq(dev->irq, dev);
957         }
958
959         if (dev->vaddr)
960                 iounmap(dev->vaddr);
961
962         dev_set_drvdata(&ofdev->dev, NULL);
963         kfree(dev);
964         return ret;
965 }
966
967 /*
968  * Cleanup initialized IIC interface
969  */
970 static int __devexit iic_remove(struct of_device *ofdev)
971 {
972         struct ibm_iic_private *dev = dev_get_drvdata(&ofdev->dev);
973
974         dev_set_drvdata(&ofdev->dev, NULL);
975
976         i2c_del_adapter(&dev->adap);
977
978         if (dev->irq != NO_IRQ) {
979                 iic_interrupt_mode(dev, 0);
980                 free_irq(dev->irq, dev);
981         }
982
983         iounmap(dev->vaddr);
984         kfree(dev);
985
986         return 0;
987 }
988
989 static const struct of_device_id ibm_iic_match[] = {
990         { .compatible = "ibm,iic-405ex", },
991         { .compatible = "ibm,iic-405gp", },
992         { .compatible = "ibm,iic-440gp", },
993         { .compatible = "ibm,iic-440gpx", },
994         { .compatible = "ibm,iic-440grx", },
995         {}
996 };
997
998 static struct of_platform_driver ibm_iic_driver = {
999         .name   = "ibm-iic",
1000         .match_table = ibm_iic_match,
1001         .probe  = iic_probe,
1002         .remove = __devexit_p(iic_remove),
1003 };
1004
1005 static int __init iic_init(void)
1006 {
1007         return of_register_platform_driver(&ibm_iic_driver);
1008 }
1009
1010 static void __exit iic_exit(void)
1011 {
1012         of_unregister_platform_driver(&ibm_iic_driver);
1013 }
1014 #endif /* CONFIG_IBM_OCP */
1015
1016 module_init(iic_init);
1017 module_exit(iic_exit);