git.oblomov.eu Git - linux-2.6/blob - drivers/net/s2io.c

   1 /************************************************************************
   2  * s2io.c: A Linux PCI-X Ethernet driver for S2IO 10GbE Server NIC
   3  * Copyright(c) 2002-2005 Neterion Inc.
   4
   5  * This software may be used and distributed according to the terms of
   6  * the GNU General Public License (GPL), incorporated herein by reference.
   7  * Drivers based on or derived from this code fall under the GPL and must
   8  * retain the authorship, copyright and license notice.  This file is not
   9  * a complete program and may only be used when the entire operating
  10  * system is licensed under the GPL.
  11  * See the file COPYING in this distribution for more information.
  12  *
  13  * Credits:
  14  * Jeff Garzik          : For pointing out the improper error condition
  15  *                        check in the s2io_xmit routine and also some
  16  *                        issues in the Tx watch dog function. Also for
  17  *                        patiently answering all those innumerable
  18  *                        questions regaring the 2.6 porting issues.
  19  * Stephen Hemminger    : Providing proper 2.6 porting mechanism for some
  20  *                        macros available only in 2.6 Kernel.
  21  * Francois Romieu      : For pointing out all code part that were
  22  *                        deprecated and also styling related comments.
  23  * Grant Grundler       : For helping me get rid of some Architecture
  24  *                        dependent code.
  25  * Christopher Hellwig  : Some more 2.6 specific issues in the driver.
  26  *
  27  * The module loadable parameters that are supported by the driver and a brief
  28  * explaination of all the variables.
  29  * rx_ring_num : This can be used to program the number of receive rings used
  30  * in the driver.
  31  * rx_ring_len: This defines the number of descriptors each ring can have. This
  32  * is also an array of size 8.
  33  * tx_fifo_num: This defines the number of Tx FIFOs thats used int the driver.
  34  * tx_fifo_len: This too is an array of 8. Each element defines the number of
  35  * Tx descriptors that can be associated with each corresponding FIFO.
  36  ************************************************************************/
  37
  38 #include <linux/config.h>
  39 #include <linux/module.h>
  40 #include <linux/types.h>
  41 #include <linux/errno.h>
  42 #include <linux/ioport.h>
  43 #include <linux/pci.h>
  44 #include <linux/dma-mapping.h>
  45 #include <linux/kernel.h>
  46 #include <linux/netdevice.h>
  47 #include <linux/etherdevice.h>
  48 #include <linux/skbuff.h>
  49 #include <linux/init.h>
  50 #include <linux/delay.h>
  51 #include <linux/stddef.h>
  52 #include <linux/ioctl.h>
  53 #include <linux/timex.h>
  54 #include <linux/sched.h>
  55 #include <linux/ethtool.h>
  56 #include <linux/version.h>
  57 #include <linux/workqueue.h>
  58 #include <linux/if_vlan.h>
  59
  60 #include <asm/system.h>
  61 #include <asm/uaccess.h>
  62 #include <asm/io.h>
  63
  64 /* local include */
  65 #include "s2io.h"
  66 #include "s2io-regs.h"
  67
  68 /* S2io Driver name & version. */
  69 static char s2io_driver_name[] = "Neterion";
  70 static char s2io_driver_version[] = "Version 2.0.3.1";
  71
  72 static inline int RXD_IS_UP2DT(RxD_t *rxdp)
  73 {
  74         int ret;
  75
  76         ret = ((!(rxdp->Control_1 & RXD_OWN_XENA)) &&
  77                 (GET_RXD_MARKER(rxdp->Control_2) != THE_RXD_MARK));
  78
  79         return ret;
  80 }
  81
  82 /*
  83  * Cards with following subsystem_id have a link state indication
  84  * problem, 600B, 600C, 600D, 640B, 640C and 640D.
  85  * macro below identifies these cards given the subsystem_id.
  86  */
  87 #define CARDS_WITH_FAULTY_LINK_INDICATORS(dev_type, subid) \
  88         (dev_type == XFRAME_I_DEVICE) ?                 \
  89                 ((((subid >= 0x600B) && (subid <= 0x600D)) || \
  90                  ((subid >= 0x640B) && (subid <= 0x640D))) ? 1 : 0) : 0
  91
  92 #define LINK_IS_UP(val64) (!(val64 & (ADAPTER_STATUS_RMAC_REMOTE_FAULT | \
  93                                       ADAPTER_STATUS_RMAC_LOCAL_FAULT)))
  94 #define TASKLET_IN_USE test_and_set_bit(0, (&sp->tasklet_status))
  95 #define PANIC   1
  96 #define LOW     2
  97 static inline int rx_buffer_level(nic_t * sp, int rxb_size, int ring)
  98 {
  99         int level = 0;
 100         mac_info_t *mac_control;
 101
 102         mac_control = &sp->mac_control;
 103         if ((mac_control->rings[ring].pkt_cnt - rxb_size) > 16) {
 104                 level = LOW;
 105                 if (rxb_size <= MAX_RXDS_PER_BLOCK) {
 106                         level = PANIC;
 107                 }
 108         }
 109
 110         return level;
 111 }
 112
 113 /* Ethtool related variables and Macros. */
 114 static char s2io_gstrings[][ETH_GSTRING_LEN] = {
 115         "Register test\t(offline)",
 116         "Eeprom test\t(offline)",
 117         "Link test\t(online)",
 118         "RLDRAM test\t(offline)",
 119         "BIST Test\t(offline)"
 120 };
 121
 122 static char ethtool_stats_keys[][ETH_GSTRING_LEN] = {
 123         {"tmac_frms"},
 124         {"tmac_data_octets"},
 125         {"tmac_drop_frms"},
 126         {"tmac_mcst_frms"},
 127         {"tmac_bcst_frms"},
 128         {"tmac_pause_ctrl_frms"},
 129         {"tmac_any_err_frms"},
 130         {"tmac_vld_ip_octets"},
 131         {"tmac_vld_ip"},
 132         {"tmac_drop_ip"},
 133         {"tmac_icmp"},
 134         {"tmac_rst_tcp"},
 135         {"tmac_tcp"},
 136         {"tmac_udp"},
 137         {"rmac_vld_frms"},
 138         {"rmac_data_octets"},
 139         {"rmac_fcs_err_frms"},
 140         {"rmac_drop_frms"},
 141         {"rmac_vld_mcst_frms"},
 142         {"rmac_vld_bcst_frms"},
 143         {"rmac_in_rng_len_err_frms"},
 144         {"rmac_long_frms"},
 145         {"rmac_pause_ctrl_frms"},
 146         {"rmac_discarded_frms"},
 147         {"rmac_usized_frms"},
 148         {"rmac_osized_frms"},
 149         {"rmac_frag_frms"},
 150         {"rmac_jabber_frms"},
 151         {"rmac_ip"},
 152         {"rmac_ip_octets"},
 153         {"rmac_hdr_err_ip"},
 154         {"rmac_drop_ip"},
 155         {"rmac_icmp"},
 156         {"rmac_tcp"},
 157         {"rmac_udp"},
 158         {"rmac_err_drp_udp"},
 159         {"rmac_pause_cnt"},
 160         {"rmac_accepted_ip"},
 161         {"rmac_err_tcp"},
 162         {"\n DRIVER STATISTICS"},
 163         {"single_bit_ecc_errs"},
 164         {"double_bit_ecc_errs"},
 165 };
 166
 167 #define S2IO_STAT_LEN sizeof(ethtool_stats_keys)/ ETH_GSTRING_LEN
 168 #define S2IO_STAT_STRINGS_LEN S2IO_STAT_LEN * ETH_GSTRING_LEN
 169
 170 #define S2IO_TEST_LEN   sizeof(s2io_gstrings) / ETH_GSTRING_LEN
 171 #define S2IO_STRINGS_LEN        S2IO_TEST_LEN * ETH_GSTRING_LEN
 172
 173 #define S2IO_TIMER_CONF(timer, handle, arg, exp)                \
 174                         init_timer(&timer);                     \
 175                         timer.function = handle;                \
 176                         timer.data = (unsigned long) arg;       \
 177                         mod_timer(&timer, (jiffies + exp))      \
 178
 179 /* Add the vlan */
 180 static void s2io_vlan_rx_register(struct net_device *dev,
 181                                         struct vlan_group *grp)
 182 {
 183         nic_t *nic = dev->priv;
 184         unsigned long flags;
 185
 186         spin_lock_irqsave(&nic->tx_lock, flags);
 187         nic->vlgrp = grp;
 188         spin_unlock_irqrestore(&nic->tx_lock, flags);
 189 }
 190
 191 /* Unregister the vlan */
 192 static void s2io_vlan_rx_kill_vid(struct net_device *dev, unsigned long vid)
 193 {
 194         nic_t *nic = dev->priv;
 195         unsigned long flags;
 196
 197         spin_lock_irqsave(&nic->tx_lock, flags);
 198         if (nic->vlgrp)
 199                 nic->vlgrp->vlan_devices[vid] = NULL;
 200         spin_unlock_irqrestore(&nic->tx_lock, flags);
 201 }
 202
 203 /*
 204  * Constants to be programmed into the Xena's registers, to configure
 205  * the XAUI.
 206  */
 207
 208 #define SWITCH_SIGN     0xA5A5A5A5A5A5A5A5ULL
 209 #define END_SIGN        0x0
 210
 211 static u64 herc_act_dtx_cfg[] = {
 212         /* Set address */
 213         0x8000051536750000ULL, 0x80000515367500E0ULL,
 214         /* Write data */
 215         0x8000051536750004ULL, 0x80000515367500E4ULL,
 216         /* Set address */
 217         0x80010515003F0000ULL, 0x80010515003F00E0ULL,
 218         /* Write data */
 219         0x80010515003F0004ULL, 0x80010515003F00E4ULL,
 220         /* Set address */
 221         0x801205150D440000ULL, 0x801205150D4400E0ULL,
 222         /* Write data */
 223         0x801205150D440004ULL, 0x801205150D4400E4ULL,
 224         /* Set address */
 225         0x80020515F2100000ULL, 0x80020515F21000E0ULL,
 226         /* Write data */
 227         0x80020515F2100004ULL, 0x80020515F21000E4ULL,
 228         /* Done */
 229         END_SIGN
 230 };
 231
 232 static u64 xena_mdio_cfg[] = {
 233         /* Reset PMA PLL */
 234         0xC001010000000000ULL, 0xC0010100000000E0ULL,
 235         0xC0010100008000E4ULL,
 236         /* Remove Reset from PMA PLL */
 237         0xC001010000000000ULL, 0xC0010100000000E0ULL,
 238         0xC0010100000000E4ULL,
 239         END_SIGN
 240 };
 241
 242 static u64 xena_dtx_cfg[] = {
 243         0x8000051500000000ULL, 0x80000515000000E0ULL,
 244         0x80000515D93500E4ULL, 0x8001051500000000ULL,
 245         0x80010515000000E0ULL, 0x80010515001E00E4ULL,
 246         0x8002051500000000ULL, 0x80020515000000E0ULL,
 247         0x80020515F21000E4ULL,
 248         /* Set PADLOOPBACKN */
 249         0x8002051500000000ULL, 0x80020515000000E0ULL,
 250         0x80020515B20000E4ULL, 0x8003051500000000ULL,
 251         0x80030515000000E0ULL, 0x80030515B20000E4ULL,
 252         0x8004051500000000ULL, 0x80040515000000E0ULL,
 253         0x80040515B20000E4ULL, 0x8005051500000000ULL,
 254         0x80050515000000E0ULL, 0x80050515B20000E4ULL,
 255         SWITCH_SIGN,
 256         /* Remove PADLOOPBACKN */
 257         0x8002051500000000ULL, 0x80020515000000E0ULL,
 258         0x80020515F20000E4ULL, 0x8003051500000000ULL,
 259         0x80030515000000E0ULL, 0x80030515F20000E4ULL,
 260         0x8004051500000000ULL, 0x80040515000000E0ULL,
 261         0x80040515F20000E4ULL, 0x8005051500000000ULL,
 262         0x80050515000000E0ULL, 0x80050515F20000E4ULL,
 263         END_SIGN
 264 };
 265
 266 /*
 267  * Constants for Fixing the MacAddress problem seen mostly on
 268  * Alpha machines.
 269  */
 270 static u64 fix_mac[] = {
 271         0x0060000000000000ULL, 0x0060600000000000ULL,
 272         0x0040600000000000ULL, 0x0000600000000000ULL,
 273         0x0020600000000000ULL, 0x0060600000000000ULL,
 274         0x0020600000000000ULL, 0x0060600000000000ULL,
 275         0x0020600000000000ULL, 0x0060600000000000ULL,
 276         0x0020600000000000ULL, 0x0060600000000000ULL,
 277         0x0020600000000000ULL, 0x0060600000000000ULL,
 278         0x0020600000000000ULL, 0x0060600000000000ULL,
 279         0x0020600000000000ULL, 0x0060600000000000ULL,
 280         0x0020600000000000ULL, 0x0060600000000000ULL,
 281         0x0020600000000000ULL, 0x0060600000000000ULL,
 282         0x0020600000000000ULL, 0x0060600000000000ULL,
 283         0x0020600000000000ULL, 0x0000600000000000ULL,
 284         0x0040600000000000ULL, 0x0060600000000000ULL,
 285         END_SIGN
 286 };
 287
 288 /* Module Loadable parameters. */
 289 static unsigned int tx_fifo_num = 1;
 290 static unsigned int tx_fifo_len[MAX_TX_FIFOS] =
 291     {[0 ...(MAX_TX_FIFOS - 1)] = 0 };
 292 static unsigned int rx_ring_num = 1;
 293 static unsigned int rx_ring_sz[MAX_RX_RINGS] =
 294     {[0 ...(MAX_RX_RINGS - 1)] = 0 };
 295 static unsigned int rts_frm_len[MAX_RX_RINGS] =
 296     {[0 ...(MAX_RX_RINGS - 1)] = 0 };
 297 static unsigned int use_continuous_tx_intrs = 1;
 298 static unsigned int rmac_pause_time = 65535;
 299 static unsigned int mc_pause_threshold_q0q3 = 187;
 300 static unsigned int mc_pause_threshold_q4q7 = 187;
 301 static unsigned int shared_splits;
 302 static unsigned int tmac_util_period = 5;
 303 static unsigned int rmac_util_period = 5;
 304 static unsigned int bimodal = 0;
 305 #ifndef CONFIG_S2IO_NAPI
 306 static unsigned int indicate_max_pkts;
 307 #endif
 308 /* Frequency of Rx desc syncs expressed as power of 2 */
 309 static unsigned int rxsync_frequency = 3;
 310
 311 /*
 312  * S2IO device table.
 313  * This table lists all the devices that this driver supports.
 314  */
 315 static struct pci_device_id s2io_tbl[] __devinitdata = {
 316         {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_S2IO_WIN,
 317          PCI_ANY_ID, PCI_ANY_ID},
 318         {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_S2IO_UNI,
 319          PCI_ANY_ID, PCI_ANY_ID},
 320         {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_WIN,
 321          PCI_ANY_ID, PCI_ANY_ID},
 322         {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_UNI,
 323          PCI_ANY_ID, PCI_ANY_ID},
 324         {0,}
 325 };
 326
 327 MODULE_DEVICE_TABLE(pci, s2io_tbl);
 328
 329 static struct pci_driver s2io_driver = {
 330       .name = "S2IO",
 331       .id_table = s2io_tbl,
 332       .probe = s2io_init_nic,
 333       .remove = __devexit_p(s2io_rem_nic),
 334 };
 335
 336 /* A simplifier macro used both by init and free shared_mem Fns(). */
 337 #define TXD_MEM_PAGE_CNT(len, per_each) ((len+per_each - 1) / per_each)
 338
 339 /**
 340  * init_shared_mem - Allocation and Initialization of Memory
 341  * @nic: Device private variable.
 342  * Description: The function allocates all the memory areas shared
 343  * between the NIC and the driver. This includes Tx descriptors,
 344  * Rx descriptors and the statistics block.
 345  */
 346
 347 static int init_shared_mem(struct s2io_nic *nic)
 348 {
 349         u32 size;
 350         void *tmp_v_addr, *tmp_v_addr_next;
 351         dma_addr_t tmp_p_addr, tmp_p_addr_next;
 352         RxD_block_t *pre_rxd_blk = NULL;
 353         int i, j, blk_cnt, rx_sz, tx_sz;
 354         int lst_size, lst_per_page;
 355         struct net_device *dev = nic->dev;
 356 #ifdef CONFIG_2BUFF_MODE
 357         u64 tmp;
 358         buffAdd_t *ba;
 359 #endif
 360
 361         mac_info_t *mac_control;
 362         struct config_param *config;
 363
 364         mac_control = &nic->mac_control;
 365         config = &nic->config;
 366
 367
 368         /* Allocation and initialization of TXDLs in FIOFs */
 369         size = 0;
 370         for (i = 0; i < config->tx_fifo_num; i++) {
 371                 size += config->tx_cfg[i].fifo_len;
 372         }
 373         if (size > MAX_AVAILABLE_TXDS) {
 374                 DBG_PRINT(ERR_DBG, "%s: Requested TxDs too high, ",
 375                           __FUNCTION__);
 376                 DBG_PRINT(ERR_DBG, "Requested: %d, max supported: 8192\n", size);
 377                 return FAILURE;
 378         }
 379
 380         lst_size = (sizeof(TxD_t) * config->max_txds);
 381         tx_sz = lst_size * size;
 382         lst_per_page = PAGE_SIZE / lst_size;
 383
 384         for (i = 0; i < config->tx_fifo_num; i++) {
 385                 int fifo_len = config->tx_cfg[i].fifo_len;
 386                 int list_holder_size = fifo_len * sizeof(list_info_hold_t);
 387                 mac_control->fifos[i].list_info = kmalloc(list_holder_size,
 388                                                           GFP_KERNEL);
 389                 if (!mac_control->fifos[i].list_info) {
 390                         DBG_PRINT(ERR_DBG,
 391                                   "Malloc failed for list_info\n");
 392                         return -ENOMEM;
 393                 }
 394                 memset(mac_control->fifos[i].list_info, 0, list_holder_size);
 395         }
 396         for (i = 0; i < config->tx_fifo_num; i++) {
 397                 int page_num = TXD_MEM_PAGE_CNT(config->tx_cfg[i].fifo_len,
 398                                                 lst_per_page);
 399                 mac_control->fifos[i].tx_curr_put_info.offset = 0;
 400                 mac_control->fifos[i].tx_curr_put_info.fifo_len =
 401                     config->tx_cfg[i].fifo_len - 1;
 402                 mac_control->fifos[i].tx_curr_get_info.offset = 0;
 403                 mac_control->fifos[i].tx_curr_get_info.fifo_len =
 404                     config->tx_cfg[i].fifo_len - 1;
 405                 mac_control->fifos[i].fifo_no = i;
 406                 mac_control->fifos[i].nic = nic;
 407                 mac_control->fifos[i].max_txds = MAX_SKB_FRAGS;
 408
 409                 for (j = 0; j < page_num; j++) {
 410                         int k = 0;
 411                         dma_addr_t tmp_p;
 412                         void *tmp_v;
 413                         tmp_v = pci_alloc_consistent(nic->pdev,
 414                                                      PAGE_SIZE, &tmp_p);
 415                         if (!tmp_v) {
 416                                 DBG_PRINT(ERR_DBG,
 417                                           "pci_alloc_consistent ");
 418                                 DBG_PRINT(ERR_DBG, "failed for TxDL\n");
 419                                 return -ENOMEM;
 420                         }
 421                         while (k < lst_per_page) {
 422                                 int l = (j * lst_per_page) + k;
 423                                 if (l == config->tx_cfg[i].fifo_len)
 424                                         break;
 425                                 mac_control->fifos[i].list_info[l].list_virt_addr =
 426                                     tmp_v + (k * lst_size);
 427                                 mac_control->fifos[i].list_info[l].list_phy_addr =
 428                                     tmp_p + (k * lst_size);
 429                                 k++;
 430                         }
 431                 }
 432         }
 433
 434         /* Allocation and initialization of RXDs in Rings */
 435         size = 0;
 436         for (i = 0; i < config->rx_ring_num; i++) {
 437                 if (config->rx_cfg[i].num_rxd % (MAX_RXDS_PER_BLOCK + 1)) {
 438                         DBG_PRINT(ERR_DBG, "%s: RxD count of ", dev->name);
 439                         DBG_PRINT(ERR_DBG, "Ring%d is not a multiple of ",
 440                                   i);
 441                         DBG_PRINT(ERR_DBG, "RxDs per Block");
 442                         return FAILURE;
 443                 }
 444                 size += config->rx_cfg[i].num_rxd;
 445                 mac_control->rings[i].block_count =
 446                     config->rx_cfg[i].num_rxd / (MAX_RXDS_PER_BLOCK + 1);
 447                 mac_control->rings[i].pkt_cnt =
 448                     config->rx_cfg[i].num_rxd - mac_control->rings[i].block_count;
 449         }
 450         size = (size * (sizeof(RxD_t)));
 451         rx_sz = size;
 452
 453         for (i = 0; i < config->rx_ring_num; i++) {
 454                 mac_control->rings[i].rx_curr_get_info.block_index = 0;
 455                 mac_control->rings[i].rx_curr_get_info.offset = 0;
 456                 mac_control->rings[i].rx_curr_get_info.ring_len =
 457                     config->rx_cfg[i].num_rxd - 1;
 458                 mac_control->rings[i].rx_curr_put_info.block_index = 0;
 459                 mac_control->rings[i].rx_curr_put_info.offset = 0;
 460                 mac_control->rings[i].rx_curr_put_info.ring_len =
 461                     config->rx_cfg[i].num_rxd - 1;
 462                 mac_control->rings[i].nic = nic;
 463                 mac_control->rings[i].ring_no = i;
 464
 465                 blk_cnt =
 466                     config->rx_cfg[i].num_rxd / (MAX_RXDS_PER_BLOCK + 1);
 467                 /*  Allocating all the Rx blocks */
 468                 for (j = 0; j < blk_cnt; j++) {
 469 #ifndef CONFIG_2BUFF_MODE
 470                         size = (MAX_RXDS_PER_BLOCK + 1) * (sizeof(RxD_t));
 471 #else
 472                         size = SIZE_OF_BLOCK;
 473 #endif
 474                         tmp_v_addr = pci_alloc_consistent(nic->pdev, size,
 475                                                           &tmp_p_addr);
 476                         if (tmp_v_addr == NULL) {
 477                                 /*
 478                                  * In case of failure, free_shared_mem()
 479                                  * is called, which should free any
 480                                  * memory that was alloced till the
 481                                  * failure happened.
 482                                  */
 483                                 mac_control->rings[i].rx_blocks[j].block_virt_addr =
 484                                     tmp_v_addr;
 485                                 return -ENOMEM;
 486                         }
 487                         memset(tmp_v_addr, 0, size);
 488                         mac_control->rings[i].rx_blocks[j].block_virt_addr =
 489                                 tmp_v_addr;
 490                         mac_control->rings[i].rx_blocks[j].block_dma_addr =
 491                                 tmp_p_addr;
 492                 }
 493                 /* Interlinking all Rx Blocks */
 494                 for (j = 0; j < blk_cnt; j++) {
 495                         tmp_v_addr =
 496                                 mac_control->rings[i].rx_blocks[j].block_virt_addr;
 497                         tmp_v_addr_next =
 498                                 mac_control->rings[i].rx_blocks[(j + 1) %
 499                                               blk_cnt].block_virt_addr;
 500                         tmp_p_addr =
 501                                 mac_control->rings[i].rx_blocks[j].block_dma_addr;
 502                         tmp_p_addr_next =
 503                                 mac_control->rings[i].rx_blocks[(j + 1) %
 504                                               blk_cnt].block_dma_addr;
 505
 506                         pre_rxd_blk = (RxD_block_t *) tmp_v_addr;
 507                         pre_rxd_blk->reserved_1 = END_OF_BLOCK; /* last RxD
 508                                                                  * marker.
 509                                                                  */
 510 #ifndef CONFIG_2BUFF_MODE
 511                         pre_rxd_blk->reserved_2_pNext_RxD_block =
 512                             (unsigned long) tmp_v_addr_next;
 513 #endif
 514                         pre_rxd_blk->pNext_RxD_Blk_physical =
 515                             (u64) tmp_p_addr_next;
 516                 }
 517         }
 518
 519 #ifdef CONFIG_2BUFF_MODE
 520         /*
 521          * Allocation of Storages for buffer addresses in 2BUFF mode
 522          * and the buffers as well.
 523          */
 524         for (i = 0; i < config->rx_ring_num; i++) {
 525                 blk_cnt =
 526                     config->rx_cfg[i].num_rxd / (MAX_RXDS_PER_BLOCK + 1);
 527                 mac_control->rings[i].ba = kmalloc((sizeof(buffAdd_t *) * blk_cnt),
 528                                      GFP_KERNEL);
 529                 if (!mac_control->rings[i].ba)
 530                         return -ENOMEM;
 531                 for (j = 0; j < blk_cnt; j++) {
 532                         int k = 0;
 533                         mac_control->rings[i].ba[j] = kmalloc((sizeof(buffAdd_t) *
 534                                                  (MAX_RXDS_PER_BLOCK + 1)),
 535                                                 GFP_KERNEL);
 536                         if (!mac_control->rings[i].ba[j])
 537                                 return -ENOMEM;
 538                         while (k != MAX_RXDS_PER_BLOCK) {
 539                                 ba = &mac_control->rings[i].ba[j][k];
 540
 541                                 ba->ba_0_org = (void *) kmalloc
 542                                     (BUF0_LEN + ALIGN_SIZE, GFP_KERNEL);
 543                                 if (!ba->ba_0_org)
 544                                         return -ENOMEM;
 545                                 tmp = (u64) ba->ba_0_org;
 546                                 tmp += ALIGN_SIZE;
 547                                 tmp &= ~((u64) ALIGN_SIZE);
 548                                 ba->ba_0 = (void *) tmp;
 549
 550                                 ba->ba_1_org = (void *) kmalloc
 551                                     (BUF1_LEN + ALIGN_SIZE, GFP_KERNEL);
 552                                 if (!ba->ba_1_org)
 553                                         return -ENOMEM;
 554                                 tmp = (u64) ba->ba_1_org;
 555                                 tmp += ALIGN_SIZE;
 556                                 tmp &= ~((u64) ALIGN_SIZE);
 557                                 ba->ba_1 = (void *) tmp;
 558                                 k++;
 559                         }
 560                 }
 561         }
 562 #endif
 563
 564         /* Allocation and initialization of Statistics block */
 565         size = sizeof(StatInfo_t);
 566         mac_control->stats_mem = pci_alloc_consistent
 567             (nic->pdev, size, &mac_control->stats_mem_phy);
 568
 569         if (!mac_control->stats_mem) {
 570                 /*
 571                  * In case of failure, free_shared_mem() is called, which
 572                  * should free any memory that was alloced till the
 573                  * failure happened.
 574                  */
 575                 return -ENOMEM;
 576         }
 577         mac_control->stats_mem_sz = size;
 578
 579         tmp_v_addr = mac_control->stats_mem;
 580         mac_control->stats_info = (StatInfo_t *) tmp_v_addr;
 581         memset(tmp_v_addr, 0, size);
 582         DBG_PRINT(INIT_DBG, "%s:Ring Mem PHY: 0x%llx\n", dev->name,
 583                   (unsigned long long) tmp_p_addr);
 584
 585         return SUCCESS;
 586 }
 587
 588 /**
 589  * free_shared_mem - Free the allocated Memory
 590  * @nic:  Device private variable.
 591  * Description: This function is to free all memory locations allocated by
 592  * the init_shared_mem() function and return it to the kernel.
 593  */
 594
 595 static void free_shared_mem(struct s2io_nic *nic)
 596 {
 597         int i, j, blk_cnt, size;
 598         void *tmp_v_addr;
 599         dma_addr_t tmp_p_addr;
 600         mac_info_t *mac_control;
 601         struct config_param *config;
 602         int lst_size, lst_per_page;
 603
 604
 605         if (!nic)
 606                 return;
 607
 608         mac_control = &nic->mac_control;
 609         config = &nic->config;
 610
 611         lst_size = (sizeof(TxD_t) * config->max_txds);
 612         lst_per_page = PAGE_SIZE / lst_size;
 613
 614         for (i = 0; i < config->tx_fifo_num; i++) {
 615                 int page_num = TXD_MEM_PAGE_CNT(config->tx_cfg[i].fifo_len,
 616                                                 lst_per_page);
 617                 for (j = 0; j < page_num; j++) {
 618                         int mem_blks = (j * lst_per_page);
 619                         if ((!mac_control->fifos[i].list_info) ||
 620                                 (!mac_control->fifos[i].list_info[mem_blks].
 621                                  list_virt_addr))
 622                                 break;
 623                         pci_free_consistent(nic->pdev, PAGE_SIZE,
 624                                             mac_control->fifos[i].
 625                                             list_info[mem_blks].
 626                                             list_virt_addr,
 627                                             mac_control->fifos[i].
 628                                             list_info[mem_blks].
 629                                             list_phy_addr);
 630                 }
 631                 kfree(mac_control->fifos[i].list_info);
 632         }
 633
 634 #ifndef CONFIG_2BUFF_MODE
 635         size = (MAX_RXDS_PER_BLOCK + 1) * (sizeof(RxD_t));
 636 #else
 637         size = SIZE_OF_BLOCK;
 638 #endif
 639         for (i = 0; i < config->rx_ring_num; i++) {
 640                 blk_cnt = mac_control->rings[i].block_count;
 641                 for (j = 0; j < blk_cnt; j++) {
 642                         tmp_v_addr = mac_control->rings[i].rx_blocks[j].
 643                                 block_virt_addr;
 644                         tmp_p_addr = mac_control->rings[i].rx_blocks[j].
 645                                 block_dma_addr;
 646                         if (tmp_v_addr == NULL)
 647                                 break;
 648                         pci_free_consistent(nic->pdev, size,
 649                                             tmp_v_addr, tmp_p_addr);
 650                 }
 651         }
 652
 653 #ifdef CONFIG_2BUFF_MODE
 654         /* Freeing buffer storage addresses in 2BUFF mode. */
 655         for (i = 0; i < config->rx_ring_num; i++) {
 656                 blk_cnt =
 657                     config->rx_cfg[i].num_rxd / (MAX_RXDS_PER_BLOCK + 1);
 658                 for (j = 0; j < blk_cnt; j++) {
 659                         int k = 0;
 660                         if (!mac_control->rings[i].ba[j])
 661                                 continue;
 662                         while (k != MAX_RXDS_PER_BLOCK) {
 663                                 buffAdd_t *ba = &mac_control->rings[i].ba[j][k];
 664                                 kfree(ba->ba_0_org);
 665                                 kfree(ba->ba_1_org);
 666                                 k++;
 667                         }
 668                         kfree(mac_control->rings[i].ba[j]);
 669                 }
 670                 if (mac_control->rings[i].ba)
 671                         kfree(mac_control->rings[i].ba);
 672         }
 673 #endif
 674
 675         if (mac_control->stats_mem) {
 676                 pci_free_consistent(nic->pdev,
 677                                     mac_control->stats_mem_sz,
 678                                     mac_control->stats_mem,
 679                                     mac_control->stats_mem_phy);
 680         }
 681 }
 682
 683 /**
 684  * s2io_verify_pci_mode -
 685  */
 686
 687 static int s2io_verify_pci_mode(nic_t *nic)
 688 {
 689         XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
 690         register u64 val64 = 0;
 691         int     mode;
 692
 693         val64 = readq(&bar0->pci_mode);
 694         mode = (u8)GET_PCI_MODE(val64);
 695
 696         if ( val64 & PCI_MODE_UNKNOWN_MODE)
 697                 return -1;      /* Unknown PCI mode */
 698         return mode;
 699 }
 700
 701
 702 /**
 703  * s2io_print_pci_mode -
 704  */
 705 static int s2io_print_pci_mode(nic_t *nic)
 706 {
 707         XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
 708         register u64 val64 = 0;
 709         int     mode;
 710         struct config_param *config = &nic->config;
 711
 712         val64 = readq(&bar0->pci_mode);
 713         mode = (u8)GET_PCI_MODE(val64);
 714
 715         if ( val64 & PCI_MODE_UNKNOWN_MODE)
 716                 return -1;      /* Unknown PCI mode */
 717
 718         if (val64 & PCI_MODE_32_BITS) {
 719                 DBG_PRINT(ERR_DBG, "%s: Device is on 32 bit ", nic->dev->name);
 720         } else {
 721                 DBG_PRINT(ERR_DBG, "%s: Device is on 64 bit ", nic->dev->name);
 722         }
 723
 724         switch(mode) {
 725                 case PCI_MODE_PCI_33:
 726                         DBG_PRINT(ERR_DBG, "33MHz PCI bus\n");
 727                         config->bus_speed = 33;
 728                         break;
 729                 case PCI_MODE_PCI_66:
 730                         DBG_PRINT(ERR_DBG, "66MHz PCI bus\n");
 731                         config->bus_speed = 133;
 732                         break;
 733                 case PCI_MODE_PCIX_M1_66:
 734                         DBG_PRINT(ERR_DBG, "66MHz PCIX(M1) bus\n");
 735                         config->bus_speed = 133; /* Herc doubles the clock rate */
 736                         break;
 737                 case PCI_MODE_PCIX_M1_100:
 738                         DBG_PRINT(ERR_DBG, "100MHz PCIX(M1) bus\n");
 739                         config->bus_speed = 200;
 740                         break;
 741                 case PCI_MODE_PCIX_M1_133:
 742                         DBG_PRINT(ERR_DBG, "133MHz PCIX(M1) bus\n");
 743                         config->bus_speed = 266;
 744                         break;
 745                 case PCI_MODE_PCIX_M2_66:
 746                         DBG_PRINT(ERR_DBG, "133MHz PCIX(M2) bus\n");
 747                         config->bus_speed = 133;
 748                         break;
 749                 case PCI_MODE_PCIX_M2_100:
 750                         DBG_PRINT(ERR_DBG, "200MHz PCIX(M2) bus\n");
 751                         config->bus_speed = 200;
 752                         break;
 753                 case PCI_MODE_PCIX_M2_133:
 754                         DBG_PRINT(ERR_DBG, "266MHz PCIX(M2) bus\n");
 755                         config->bus_speed = 266;
 756                         break;
 757                 default:
 758                         return -1;      /* Unsupported bus speed */
 759         }
 760
 761         return mode;
 762 }
 763
 764 /**
 765  *  init_nic - Initialization of hardware
 766  *  @nic: device peivate variable
 767  *  Description: The function sequentially configures every block
 768  *  of the H/W from their reset values.
 769  *  Return Value:  SUCCESS on success and
 770  *  '-1' on failure (endian settings incorrect).
 771  */
 772
 773 static int init_nic(struct s2io_nic *nic)
 774 {
 775         XENA_dev_config_t __iomem *bar0 = nic->bar0;
 776         struct net_device *dev = nic->dev;
 777         register u64 val64 = 0;
 778         void __iomem *add;
 779         u32 time;
 780         int i, j;
 781         mac_info_t *mac_control;
 782         struct config_param *config;
 783         int mdio_cnt = 0, dtx_cnt = 0;
 784         unsigned long long mem_share;
 785         int mem_size;
 786
 787         mac_control = &nic->mac_control;
 788         config = &nic->config;
 789
 790         /* to set the swapper controle on the card */
 791         if(s2io_set_swapper(nic)) {
 792                 DBG_PRINT(ERR_DBG,"ERROR: Setting Swapper failed\n");
 793                 return -1;
 794         }
 795
 796         /*
 797          * Herc requires EOI to be removed from reset before XGXS, so..
 798          */
 799         if (nic->device_type & XFRAME_II_DEVICE) {
 800                 val64 = 0xA500000000ULL;
 801                 writeq(val64, &bar0->sw_reset);
 802                 msleep(500);
 803                 val64 = readq(&bar0->sw_reset);
 804         }
 805
 806         /* Remove XGXS from reset state */
 807         val64 = 0;
 808         writeq(val64, &bar0->sw_reset);
 809         msleep(500);
 810         val64 = readq(&bar0->sw_reset);
 811
 812         /*  Enable Receiving broadcasts */
 813         add = &bar0->mac_cfg;
 814         val64 = readq(&bar0->mac_cfg);
 815         val64 |= MAC_RMAC_BCAST_ENABLE;
 816         writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
 817         writel((u32) val64, add);
 818         writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
 819         writel((u32) (val64 >> 32), (add + 4));
 820
 821         /* Read registers in all blocks */
 822         val64 = readq(&bar0->mac_int_mask);
 823         val64 = readq(&bar0->mc_int_mask);
 824         val64 = readq(&bar0->xgxs_int_mask);
 825
 826         /*  Set MTU */
 827         val64 = dev->mtu;
 828         writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len);
 829
 830         /*
 831          * Configuring the XAUI Interface of Xena.
 832          * ***************************************
 833          * To Configure the Xena's XAUI, one has to write a series
 834          * of 64 bit values into two registers in a particular
 835          * sequence. Hence a macro 'SWITCH_SIGN' has been defined
 836          * which will be defined in the array of configuration values
 837          * (xena_dtx_cfg & xena_mdio_cfg) at appropriate places
 838          * to switch writing from one regsiter to another. We continue
 839          * writing these values until we encounter the 'END_SIGN' macro.
 840          * For example, After making a series of 21 writes into
 841          * dtx_control register the 'SWITCH_SIGN' appears and hence we
 842          * start writing into mdio_control until we encounter END_SIGN.
 843          */
 844         if (nic->device_type & XFRAME_II_DEVICE) {
 845                 while (herc_act_dtx_cfg[dtx_cnt] != END_SIGN) {
 846                         SPECIAL_REG_WRITE(herc_act_dtx_cfg[dtx_cnt],
 847                                           &bar0->dtx_control, UF);
 848                         if (dtx_cnt & 0x1)
 849                                 msleep(1); /* Necessary!! */
 850                         dtx_cnt++;
 851                 }
 852         } else {
 853                 while (1) {
 854                       dtx_cfg:
 855                         while (xena_dtx_cfg[dtx_cnt] != END_SIGN) {
 856                                 if (xena_dtx_cfg[dtx_cnt] == SWITCH_SIGN) {
 857                                         dtx_cnt++;
 858                                         goto mdio_cfg;
 859                                 }
 860                                 SPECIAL_REG_WRITE(xena_dtx_cfg[dtx_cnt],
 861                                                   &bar0->dtx_control, UF);
 862                                 val64 = readq(&bar0->dtx_control);
 863                                 dtx_cnt++;
 864                         }
 865                       mdio_cfg:
 866                         while (xena_mdio_cfg[mdio_cnt] != END_SIGN) {
 867                                 if (xena_mdio_cfg[mdio_cnt] == SWITCH_SIGN) {
 868                                         mdio_cnt++;
 869                                         goto dtx_cfg;
 870                                 }
 871                                 SPECIAL_REG_WRITE(xena_mdio_cfg[mdio_cnt],
 872                                                   &bar0->mdio_control, UF);
 873                                 val64 = readq(&bar0->mdio_control);
 874                                 mdio_cnt++;
 875                         }
 876                         if ((xena_dtx_cfg[dtx_cnt] == END_SIGN) &&
 877                             (xena_mdio_cfg[mdio_cnt] == END_SIGN)) {
 878                                 break;
 879                         } else {
 880                                 goto dtx_cfg;
 881                         }
 882                 }
 883         }
 884
 885         /*  Tx DMA Initialization */
 886         val64 = 0;
 887         writeq(val64, &bar0->tx_fifo_partition_0);
 888         writeq(val64, &bar0->tx_fifo_partition_1);
 889         writeq(val64, &bar0->tx_fifo_partition_2);
 890         writeq(val64, &bar0->tx_fifo_partition_3);
 891
 892
 893         for (i = 0, j = 0; i < config->tx_fifo_num; i++) {
 894                 val64 |=
 895                     vBIT(config->tx_cfg[i].fifo_len - 1, ((i * 32) + 19),
 896                          13) | vBIT(config->tx_cfg[i].fifo_priority,
 897                                     ((i * 32) + 5), 3);
 898
 899                 if (i == (config->tx_fifo_num - 1)) {
 900                         if (i % 2 == 0)
 901                                 i++;
 902                 }
 903
 904                 switch (i) {
 905                 case 1:
 906                         writeq(val64, &bar0->tx_fifo_partition_0);
 907                         val64 = 0;
 908                         break;
 909                 case 3:
 910                         writeq(val64, &bar0->tx_fifo_partition_1);
 911                         val64 = 0;
 912                         break;
 913                 case 5:
 914                         writeq(val64, &bar0->tx_fifo_partition_2);
 915                         val64 = 0;
 916                         break;
 917                 case 7:
 918                         writeq(val64, &bar0->tx_fifo_partition_3);
 919                         break;
 920                 }
 921         }
 922
 923         /* Enable Tx FIFO partition 0. */
 924         val64 = readq(&bar0->tx_fifo_partition_0);
 925         val64 |= BIT(0);        /* To enable the FIFO partition. */
 926         writeq(val64, &bar0->tx_fifo_partition_0);
 927
 928         /*
 929          * Disable 4 PCCs for Xena1, 2 and 3 as per H/W bug
 930          * SXE-008 TRANSMIT DMA ARBITRATION ISSUE.
 931          */
 932         if ((nic->device_type == XFRAME_I_DEVICE) &&
 933                 (get_xena_rev_id(nic->pdev) < 4))
 934                 writeq(PCC_ENABLE_FOUR, &bar0->pcc_enable);
 935
 936         val64 = readq(&bar0->tx_fifo_partition_0);
 937         DBG_PRINT(INIT_DBG, "Fifo partition at: 0x%p is: 0x%llx\n",
 938                   &bar0->tx_fifo_partition_0, (unsigned long long) val64);
 939
 940         /*
 941          * Initialization of Tx_PA_CONFIG register to ignore packet
 942          * integrity checking.
 943          */
 944         val64 = readq(&bar0->tx_pa_cfg);
 945         val64 |= TX_PA_CFG_IGNORE_FRM_ERR | TX_PA_CFG_IGNORE_SNAP_OUI |
 946             TX_PA_CFG_IGNORE_LLC_CTRL | TX_PA_CFG_IGNORE_L2_ERR;
 947         writeq(val64, &bar0->tx_pa_cfg);
 948
 949         /* Rx DMA intialization. */
 950         val64 = 0;
 951         for (i = 0; i < config->rx_ring_num; i++) {
 952                 val64 |=
 953                     vBIT(config->rx_cfg[i].ring_priority, (5 + (i * 8)),
 954                          3);
 955         }
 956         writeq(val64, &bar0->rx_queue_priority);
 957
 958         /*
 959          * Allocating equal share of memory to all the
 960          * configured Rings.
 961          */
 962         val64 = 0;
 963         if (nic->device_type & XFRAME_II_DEVICE)
 964                 mem_size = 32;
 965         else
 966                 mem_size = 64;
 967
 968         for (i = 0; i < config->rx_ring_num; i++) {
 969                 switch (i) {
 970                 case 0:
 971                         mem_share = (mem_size / config->rx_ring_num +
 972                                      mem_size % config->rx_ring_num);
 973                         val64 |= RX_QUEUE_CFG_Q0_SZ(mem_share);
 974                         continue;
 975                 case 1:
 976                         mem_share = (mem_size / config->rx_ring_num);
 977                         val64 |= RX_QUEUE_CFG_Q1_SZ(mem_share);
 978                         continue;
 979                 case 2:
 980                         mem_share = (mem_size / config->rx_ring_num);
 981                         val64 |= RX_QUEUE_CFG_Q2_SZ(mem_share);
 982                         continue;
 983                 case 3:
 984                         mem_share = (mem_size / config->rx_ring_num);
 985                         val64 |= RX_QUEUE_CFG_Q3_SZ(mem_share);
 986                         continue;
 987                 case 4:
 988                         mem_share = (mem_size / config->rx_ring_num);
 989                         val64 |= RX_QUEUE_CFG_Q4_SZ(mem_share);
 990                         continue;
 991                 case 5:
 992                         mem_share = (mem_size / config->rx_ring_num);
 993                         val64 |= RX_QUEUE_CFG_Q5_SZ(mem_share);
 994                         continue;
 995                 case 6:
 996                         mem_share = (mem_size / config->rx_ring_num);
 997                         val64 |= RX_QUEUE_CFG_Q6_SZ(mem_share);
 998                         continue;
 999                 case 7:
1000                         mem_share = (mem_size / config->rx_ring_num);
1001                         val64 |= RX_QUEUE_CFG_Q7_SZ(mem_share);
1002                         continue;
1003                 }
1004         }
1005         writeq(val64, &bar0->rx_queue_cfg);
1006
1007         /*
1008          * Filling Tx round robin registers
1009          * as per the number of FIFOs
1010          */
1011         switch (config->tx_fifo_num) {
1012         case 1:
1013                 val64 = 0x0000000000000000ULL;
1014                 writeq(val64, &bar0->tx_w_round_robin_0);
1015                 writeq(val64, &bar0->tx_w_round_robin_1);
1016                 writeq(val64, &bar0->tx_w_round_robin_2);
1017                 writeq(val64, &bar0->tx_w_round_robin_3);
1018                 writeq(val64, &bar0->tx_w_round_robin_4);
1019                 break;
1020         case 2:
1021                 val64 = 0x0000010000010000ULL;
1022                 writeq(val64, &bar0->tx_w_round_robin_0);
1023                 val64 = 0x0100000100000100ULL;
1024                 writeq(val64, &bar0->tx_w_round_robin_1);
1025                 val64 = 0x0001000001000001ULL;
1026                 writeq(val64, &bar0->tx_w_round_robin_2);
1027                 val64 = 0x0000010000010000ULL;
1028                 writeq(val64, &bar0->tx_w_round_robin_3);
1029                 val64 = 0x0100000000000000ULL;
1030                 writeq(val64, &bar0->tx_w_round_robin_4);
1031                 break;
1032         case 3:
1033                 val64 = 0x0001000102000001ULL;
1034                 writeq(val64, &bar0->tx_w_round_robin_0);
1035                 val64 = 0x0001020000010001ULL;
1036                 writeq(val64, &bar0->tx_w_round_robin_1);
1037                 val64 = 0x0200000100010200ULL;
1038                 writeq(val64, &bar0->tx_w_round_robin_2);
1039                 val64 = 0x0001000102000001ULL;
1040                 writeq(val64, &bar0->tx_w_round_robin_3);
1041                 val64 = 0x0001020000000000ULL;
1042                 writeq(val64, &bar0->tx_w_round_robin_4);
1043                 break;
1044         case 4:
1045                 val64 = 0x0001020300010200ULL;
1046                 writeq(val64, &bar0->tx_w_round_robin_0);
1047                 val64 = 0x0100000102030001ULL;
1048                 writeq(val64, &bar0->tx_w_round_robin_1);
1049                 val64 = 0x0200010000010203ULL;
1050                 writeq(val64, &bar0->tx_w_round_robin_2);
1051                 val64 = 0x0001020001000001ULL;
1052                 writeq(val64, &bar0->tx_w_round_robin_3);
1053                 val64 = 0x0203000100000000ULL;
1054                 writeq(val64, &bar0->tx_w_round_robin_4);
1055                 break;
1056         case 5:
1057                 val64 = 0x0001000203000102ULL;
1058                 writeq(val64, &bar0->tx_w_round_robin_0);
1059                 val64 = 0x0001020001030004ULL;
1060                 writeq(val64, &bar0->tx_w_round_robin_1);
1061                 val64 = 0x0001000203000102ULL;
1062                 writeq(val64, &bar0->tx_w_round_robin_2);
1063                 val64 = 0x0001020001030004ULL;
1064                 writeq(val64, &bar0->tx_w_round_robin_3);
1065                 val64 = 0x0001000000000000ULL;
1066                 writeq(val64, &bar0->tx_w_round_robin_4);
1067                 break;
1068         case 6:
1069                 val64 = 0x0001020304000102ULL;
1070                 writeq(val64, &bar0->tx_w_round_robin_0);
1071                 val64 = 0x0304050001020001ULL;
1072                 writeq(val64, &bar0->tx_w_round_robin_1);
1073                 val64 = 0x0203000100000102ULL;
1074                 writeq(val64, &bar0->tx_w_round_robin_2);
1075                 val64 = 0x0304000102030405ULL;
1076                 writeq(val64, &bar0->tx_w_round_robin_3);
1077                 val64 = 0x0001000200000000ULL;
1078                 writeq(val64, &bar0->tx_w_round_robin_4);
1079                 break;
1080         case 7:
1081                 val64 = 0x0001020001020300ULL;
1082                 writeq(val64, &bar0->tx_w_round_robin_0);
1083                 val64 = 0x0102030400010203ULL;
1084                 writeq(val64, &bar0->tx_w_round_robin_1);
1085                 val64 = 0x0405060001020001ULL;
1086                 writeq(val64, &bar0->tx_w_round_robin_2);
1087                 val64 = 0x0304050000010200ULL;
1088                 writeq(val64, &bar0->tx_w_round_robin_3);
1089                 val64 = 0x0102030000000000ULL;
1090                 writeq(val64, &bar0->tx_w_round_robin_4);
1091                 break;
1092         case 8:
1093                 val64 = 0x0001020300040105ULL;
1094                 writeq(val64, &bar0->tx_w_round_robin_0);
1095                 val64 = 0x0200030106000204ULL;
1096                 writeq(val64, &bar0->tx_w_round_robin_1);
1097                 val64 = 0x0103000502010007ULL;
1098                 writeq(val64, &bar0->tx_w_round_robin_2);
1099                 val64 = 0x0304010002060500ULL;
1100                 writeq(val64, &bar0->tx_w_round_robin_3);
1101                 val64 = 0x0103020400000000ULL;
1102                 writeq(val64, &bar0->tx_w_round_robin_4);
1103                 break;
1104         }
1105
1106         /* Filling the Rx round robin registers as per the
1107          * number of Rings and steering based on QoS.
1108          */
1109         switch (config->rx_ring_num) {
1110         case 1:
1111                 val64 = 0x8080808080808080ULL;
1112                 writeq(val64, &bar0->rts_qos_steering);
1113                 break;
1114         case 2:
1115                 val64 = 0x0000010000010000ULL;
1116                 writeq(val64, &bar0->rx_w_round_robin_0);
1117                 val64 = 0x0100000100000100ULL;
1118                 writeq(val64, &bar0->rx_w_round_robin_1);
1119                 val64 = 0x0001000001000001ULL;
1120                 writeq(val64, &bar0->rx_w_round_robin_2);
1121                 val64 = 0x0000010000010000ULL;
1122                 writeq(val64, &bar0->rx_w_round_robin_3);
1123                 val64 = 0x0100000000000000ULL;
1124                 writeq(val64, &bar0->rx_w_round_robin_4);
1125
1126                 val64 = 0x8080808040404040ULL;
1127                 writeq(val64, &bar0->rts_qos_steering);
1128                 break;
1129         case 3:
1130                 val64 = 0x0001000102000001ULL;
1131                 writeq(val64, &bar0->rx_w_round_robin_0);
1132                 val64 = 0x0001020000010001ULL;
1133                 writeq(val64, &bar0->rx_w_round_robin_1);
1134                 val64 = 0x0200000100010200ULL;
1135                 writeq(val64, &bar0->rx_w_round_robin_2);
1136                 val64 = 0x0001000102000001ULL;
1137                 writeq(val64, &bar0->rx_w_round_robin_3);
1138                 val64 = 0x0001020000000000ULL;
1139                 writeq(val64, &bar0->rx_w_round_robin_4);
1140
1141                 val64 = 0x8080804040402020ULL;
1142                 writeq(val64, &bar0->rts_qos_steering);
1143                 break;
1144         case 4:
1145                 val64 = 0x0001020300010200ULL;
1146                 writeq(val64, &bar0->rx_w_round_robin_0);
1147                 val64 = 0x0100000102030001ULL;
1148                 writeq(val64, &bar0->rx_w_round_robin_1);
1149                 val64 = 0x0200010000010203ULL;
1150                 writeq(val64, &bar0->rx_w_round_robin_2);
1151                 val64 = 0x0001020001000001ULL;
1152                 writeq(val64, &bar0->rx_w_round_robin_3);
1153                 val64 = 0x0203000100000000ULL;
1154                 writeq(val64, &bar0->rx_w_round_robin_4);
1155
1156                 val64 = 0x8080404020201010ULL;
1157                 writeq(val64, &bar0->rts_qos_steering);
1158                 break;
1159         case 5:
1160                 val64 = 0x0001000203000102ULL;
1161                 writeq(val64, &bar0->rx_w_round_robin_0);
1162                 val64 = 0x0001020001030004ULL;
1163                 writeq(val64, &bar0->rx_w_round_robin_1);
1164                 val64 = 0x0001000203000102ULL;
1165                 writeq(val64, &bar0->rx_w_round_robin_2);
1166                 val64 = 0x0001020001030004ULL;
1167                 writeq(val64, &bar0->rx_w_round_robin_3);
1168                 val64 = 0x0001000000000000ULL;
1169                 writeq(val64, &bar0->rx_w_round_robin_4);
1170
1171                 val64 = 0x8080404020201008ULL;
1172                 writeq(val64, &bar0->rts_qos_steering);
1173                 break;
1174         case 6:
1175                 val64 = 0x0001020304000102ULL;
1176                 writeq(val64, &bar0->rx_w_round_robin_0);
1177                 val64 = 0x0304050001020001ULL;
1178                 writeq(val64, &bar0->rx_w_round_robin_1);
1179                 val64 = 0x0203000100000102ULL;
1180                 writeq(val64, &bar0->rx_w_round_robin_2);
1181                 val64 = 0x0304000102030405ULL;
1182                 writeq(val64, &bar0->rx_w_round_robin_3);
1183                 val64 = 0x0001000200000000ULL;
1184                 writeq(val64, &bar0->rx_w_round_robin_4);
1185
1186                 val64 = 0x8080404020100804ULL;
1187                 writeq(val64, &bar0->rts_qos_steering);
1188                 break;
1189         case 7:
1190                 val64 = 0x0001020001020300ULL;
1191                 writeq(val64, &bar0->rx_w_round_robin_0);
1192                 val64 = 0x0102030400010203ULL;
1193                 writeq(val64, &bar0->rx_w_round_robin_1);
1194                 val64 = 0x0405060001020001ULL;
1195                 writeq(val64, &bar0->rx_w_round_robin_2);
1196                 val64 = 0x0304050000010200ULL;
1197                 writeq(val64, &bar0->rx_w_round_robin_3);
1198                 val64 = 0x0102030000000000ULL;
1199                 writeq(val64, &bar0->rx_w_round_robin_4);
1200
1201                 val64 = 0x8080402010080402ULL;
1202                 writeq(val64, &bar0->rts_qos_steering);
1203                 break;
1204         case 8:
1205                 val64 = 0x0001020300040105ULL;
1206                 writeq(val64, &bar0->rx_w_round_robin_0);
1207                 val64 = 0x0200030106000204ULL;
1208                 writeq(val64, &bar0->rx_w_round_robin_1);
1209                 val64 = 0x0103000502010007ULL;
1210                 writeq(val64, &bar0->rx_w_round_robin_2);
1211                 val64 = 0x0304010002060500ULL;
1212                 writeq(val64, &bar0->rx_w_round_robin_3);
1213                 val64 = 0x0103020400000000ULL;
1214                 writeq(val64, &bar0->rx_w_round_robin_4);
1215
1216                 val64 = 0x8040201008040201ULL;
1217                 writeq(val64, &bar0->rts_qos_steering);
1218                 break;
1219         }
1220
1221         /* UDP Fix */
1222         val64 = 0;
1223         for (i = 0; i < 8; i++)
1224                 writeq(val64, &bar0->rts_frm_len_n[i]);
1225
1226         /* Set the default rts frame length for the rings configured */
1227         val64 = MAC_RTS_FRM_LEN_SET(dev->mtu+22);
1228         for (i = 0 ; i < config->rx_ring_num ; i++)
1229                 writeq(val64, &bar0->rts_frm_len_n[i]);
1230
1231         /* Set the frame length for the configured rings
1232          * desired by the user
1233          */
1234         for (i = 0; i < config->rx_ring_num; i++) {
1235                 /* If rts_frm_len[i] == 0 then it is assumed that user not
1236                  * specified frame length steering.
1237                  * If the user provides the frame length then program
1238                  * the rts_frm_len register for those values or else
1239                  * leave it as it is.
1240                  */
1241                 if (rts_frm_len[i] != 0) {
1242                         writeq(MAC_RTS_FRM_LEN_SET(rts_frm_len[i]),
1243                                 &bar0->rts_frm_len_n[i]);
1244                 }
1245         }
1246
1247         /* Program statistics memory */
1248         writeq(mac_control->stats_mem_phy, &bar0->stat_addr);
1249
1250         if (nic->device_type == XFRAME_II_DEVICE) {
1251                 val64 = STAT_BC(0x320);
1252                 writeq(val64, &bar0->stat_byte_cnt);
1253         }
1254
1255         /*
1256          * Initializing the sampling rate for the device to calculate the
1257          * bandwidth utilization.
1258          */
1259         val64 = MAC_TX_LINK_UTIL_VAL(tmac_util_period) |
1260             MAC_RX_LINK_UTIL_VAL(rmac_util_period);
1261         writeq(val64, &bar0->mac_link_util);
1262
1263
1264         /*
1265          * Initializing the Transmit and Receive Traffic Interrupt
1266          * Scheme.
1267          */
1268         /*
1269          * TTI Initialization. Default Tx timer gets us about
1270          * 250 interrupts per sec. Continuous interrupts are enabled
1271          * by default.
1272          */
1273         if (nic->device_type == XFRAME_II_DEVICE) {
1274                 int count = (nic->config.bus_speed * 125)/2;
1275                 val64 = TTI_DATA1_MEM_TX_TIMER_VAL(count);
1276         } else {
1277
1278                 val64 = TTI_DATA1_MEM_TX_TIMER_VAL(0x2078);
1279         }
1280         val64 |= TTI_DATA1_MEM_TX_URNG_A(0xA) |
1281             TTI_DATA1_MEM_TX_URNG_B(0x10) |
1282             TTI_DATA1_MEM_TX_URNG_C(0x30) | TTI_DATA1_MEM_TX_TIMER_AC_EN;
1283                 if (use_continuous_tx_intrs)
1284                         val64 |= TTI_DATA1_MEM_TX_TIMER_CI_EN;
1285         writeq(val64, &bar0->tti_data1_mem);
1286
1287         val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) |
1288             TTI_DATA2_MEM_TX_UFC_B(0x20) |
1289             TTI_DATA2_MEM_TX_UFC_C(0x70) | TTI_DATA2_MEM_TX_UFC_D(0x80);
1290         writeq(val64, &bar0->tti_data2_mem);
1291
1292         val64 = TTI_CMD_MEM_WE | TTI_CMD_MEM_STROBE_NEW_CMD;
1293         writeq(val64, &bar0->tti_command_mem);
1294
1295         /*
1296          * Once the operation completes, the Strobe bit of the command
1297          * register will be reset. We poll for this particular condition
1298          * We wait for a maximum of 500ms for the operation to complete,
1299          * if it's not complete by then we return error.
1300          */
1301         time = 0;
1302         while (TRUE) {
1303                 val64 = readq(&bar0->tti_command_mem);
1304                 if (!(val64 & TTI_CMD_MEM_STROBE_NEW_CMD)) {
1305                         break;
1306                 }
1307                 if (time > 10) {
1308                         DBG_PRINT(ERR_DBG, "%s: TTI init Failed\n",
1309                                   dev->name);
1310                         return -1;
1311                 }
1312                 msleep(50);
1313                 time++;
1314         }
1315
1316         if (nic->config.bimodal) {
1317                 int k = 0;
1318                 for (k = 0; k < config->rx_ring_num; k++) {
1319                         val64 = TTI_CMD_MEM_WE | TTI_CMD_MEM_STROBE_NEW_CMD;
1320                         val64 |= TTI_CMD_MEM_OFFSET(0x38+k);
1321                         writeq(val64, &bar0->tti_command_mem);
1322
1323                 /*
1324                  * Once the operation completes, the Strobe bit of the command
1325                  * register will be reset. We poll for this particular condition
1326                  * We wait for a maximum of 500ms for the operation to complete,
1327                  * if it's not complete by then we return error.
1328                 */
1329                         time = 0;
1330                         while (TRUE) {
1331                                 val64 = readq(&bar0->tti_command_mem);
1332                                 if (!(val64 & TTI_CMD_MEM_STROBE_NEW_CMD)) {
1333                                         break;
1334                                 }
1335                                 if (time > 10) {
1336                                         DBG_PRINT(ERR_DBG,
1337                                                 "%s: TTI init Failed\n",
1338                                         dev->name);
1339                                         return -1;
1340                                 }
1341                                 time++;
1342                                 msleep(50);
1343                         }
1344                 }
1345         } else {
1346
1347                 /* RTI Initialization */
1348                 if (nic->device_type == XFRAME_II_DEVICE) {
1349                         /*
1350                          * Programmed to generate Apprx 500 Intrs per
1351                          * second
1352                          */
1353                         int count = (nic->config.bus_speed * 125)/4;
1354                         val64 = RTI_DATA1_MEM_RX_TIMER_VAL(count);
1355                 } else {
1356                         val64 = RTI_DATA1_MEM_RX_TIMER_VAL(0xFFF);
1357                 }
1358                 val64 |= RTI_DATA1_MEM_RX_URNG_A(0xA) |
1359                     RTI_DATA1_MEM_RX_URNG_B(0x10) |
1360                     RTI_DATA1_MEM_RX_URNG_C(0x30) | RTI_DATA1_MEM_RX_TIMER_AC_EN;
1361
1362                 writeq(val64, &bar0->rti_data1_mem);
1363
1364                 val64 = RTI_DATA2_MEM_RX_UFC_A(0x1) |
1365                     RTI_DATA2_MEM_RX_UFC_B(0x2) |
1366                     RTI_DATA2_MEM_RX_UFC_C(0x40) | RTI_DATA2_MEM_RX_UFC_D(0x80);
1367                 writeq(val64, &bar0->rti_data2_mem);
1368
1369                 for (i = 0; i < config->rx_ring_num; i++) {
1370                         val64 = RTI_CMD_MEM_WE | RTI_CMD_MEM_STROBE_NEW_CMD
1371                                         | RTI_CMD_MEM_OFFSET(i);
1372                         writeq(val64, &bar0->rti_command_mem);
1373
1374                         /*
1375                          * Once the operation completes, the Strobe bit of the
1376                          * command register will be reset. We poll for this
1377                          * particular condition. We wait for a maximum of 500ms
1378                          * for the operation to complete, if it's not complete
1379                          * by then we return error.
1380                          */
1381                         time = 0;
1382                         while (TRUE) {
1383                                 val64 = readq(&bar0->rti_command_mem);
1384                                 if (!(val64 & RTI_CMD_MEM_STROBE_NEW_CMD)) {
1385                                         break;
1386                                 }
1387                                 if (time > 10) {
1388                                         DBG_PRINT(ERR_DBG, "%s: RTI init Failed\n",
1389                                                   dev->name);
1390                                         return -1;
1391                                 }
1392                                 time++;
1393                                 msleep(50);
1394                         }
1395                 }
1396         }
1397
1398         /*
1399          * Initializing proper values as Pause threshold into all
1400          * the 8 Queues on Rx side.
1401          */
1402         writeq(0xffbbffbbffbbffbbULL, &bar0->mc_pause_thresh_q0q3);
1403         writeq(0xffbbffbbffbbffbbULL, &bar0->mc_pause_thresh_q4q7);
1404
1405         /* Disable RMAC PAD STRIPPING */
1406         add = (void *) &bar0->mac_cfg;
1407         val64 = readq(&bar0->mac_cfg);
1408         val64 &= ~(MAC_CFG_RMAC_STRIP_PAD);
1409         writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
1410         writel((u32) (val64), add);
1411         writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
1412         writel((u32) (val64 >> 32), (add + 4));
1413         val64 = readq(&bar0->mac_cfg);
1414
1415         /*
1416          * Set the time value to be inserted in the pause frame
1417          * generated by xena.
1418          */
1419         val64 = readq(&bar0->rmac_pause_cfg);
1420         val64 &= ~(RMAC_PAUSE_HG_PTIME(0xffff));
1421         val64 |= RMAC_PAUSE_HG_PTIME(nic->mac_control.rmac_pause_time);
1422         writeq(val64, &bar0->rmac_pause_cfg);
1423
1424         /*
1425          * Set the Threshold Limit for Generating the pause frame
1426          * If the amount of data in any Queue exceeds ratio of
1427          * (mac_control.mc_pause_threshold_q0q3 or q4q7)/256
1428          * pause frame is generated
1429          */
1430         val64 = 0;
1431         for (i = 0; i < 4; i++) {
1432                 val64 |=
1433                     (((u64) 0xFF00 | nic->mac_control.
1434                       mc_pause_threshold_q0q3)
1435                      << (i * 2 * 8));
1436         }
1437         writeq(val64, &bar0->mc_pause_thresh_q0q3);
1438
1439         val64 = 0;
1440         for (i = 0; i < 4; i++) {
1441                 val64 |=
1442                     (((u64) 0xFF00 | nic->mac_control.
1443                       mc_pause_threshold_q4q7)
1444                      << (i * 2 * 8));
1445         }
1446         writeq(val64, &bar0->mc_pause_thresh_q4q7);
1447
1448         /*
1449          * TxDMA will stop Read request if the number of read split has
1450          * exceeded the limit pointed by shared_splits
1451          */
1452         val64 = readq(&bar0->pic_control);
1453         val64 |= PIC_CNTL_SHARED_SPLITS(shared_splits);
1454         writeq(val64, &bar0->pic_control);
1455
1456         /*
1457          * Programming the Herc to split every write transaction
1458          * that does not start on an ADB to reduce disconnects.
1459          */
1460         if (nic->device_type == XFRAME_II_DEVICE) {
1461                 val64 = WREQ_SPLIT_MASK_SET_MASK(255);
1462                 writeq(val64, &bar0->wreq_split_mask);
1463         }
1464
1465         /* Setting Link stability period to 64 ms */
1466         if (nic->device_type == XFRAME_II_DEVICE) {
1467                 val64 = MISC_LINK_STABILITY_PRD(3);
1468                 writeq(val64, &bar0->misc_control);
1469         }
1470
1471         return SUCCESS;
1472 }
1473 #define LINK_UP_DOWN_INTERRUPT          1
1474 #define MAC_RMAC_ERR_TIMER              2
1475
1476 #if defined(CONFIG_MSI_MODE) || defined(CONFIG_MSIX_MODE)
1477 #define s2io_link_fault_indication(x) MAC_RMAC_ERR_TIMER
1478 #else
1479 int s2io_link_fault_indication(nic_t *nic)
1480 {
1481         if (nic->device_type == XFRAME_II_DEVICE)
1482                 return LINK_UP_DOWN_INTERRUPT;
1483         else
1484                 return MAC_RMAC_ERR_TIMER;
1485 }
1486 #endif
1487
1488 /**
1489  *  en_dis_able_nic_intrs - Enable or Disable the interrupts
1490  *  @nic: device private variable,
1491  *  @mask: A mask indicating which Intr block must be modified and,
1492  *  @flag: A flag indicating whether to enable or disable the Intrs.
1493  *  Description: This function will either disable or enable the interrupts
1494  *  depending on the flag argument. The mask argument can be used to
1495  *  enable/disable any Intr block.
1496  *  Return Value: NONE.
1497  */
1498
1499 static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag)
1500 {
1501         XENA_dev_config_t __iomem *bar0 = nic->bar0;
1502         register u64 val64 = 0, temp64 = 0;
1503
1504         /*  Top level interrupt classification */
1505         /*  PIC Interrupts */
1506         if ((mask & (TX_PIC_INTR | RX_PIC_INTR))) {
1507                 /*  Enable PIC Intrs in the general intr mask register */
1508                 val64 = TXPIC_INT_M | PIC_RX_INT_M;
1509                 if (flag == ENABLE_INTRS) {
1510                         temp64 = readq(&bar0->general_int_mask);
1511                         temp64 &= ~((u64) val64);
1512                         writeq(temp64, &bar0->general_int_mask);
1513                         /*
1514                          * If Hercules adapter enable GPIO otherwise
1515                          * disabled all PCIX, Flash, MDIO, IIC and GPIO
1516                          * interrupts for now.
1517                          * TODO
1518                          */
1519                         if (s2io_link_fault_indication(nic) ==
1520                                         LINK_UP_DOWN_INTERRUPT ) {
1521                                 temp64 = readq(&bar0->pic_int_mask);
1522                                 temp64 &= ~((u64) PIC_INT_GPIO);
1523                                 writeq(temp64, &bar0->pic_int_mask);
1524                                 temp64 = readq(&bar0->gpio_int_mask);
1525                                 temp64 &= ~((u64) GPIO_INT_MASK_LINK_UP);
1526                                 writeq(temp64, &bar0->gpio_int_mask);
1527                         } else {
1528                                 writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask);
1529                         }
1530                         /*
1531                          * No MSI Support is available presently, so TTI and
1532                          * RTI interrupts are also disabled.
1533                          */
1534                 } else if (flag == DISABLE_INTRS) {
1535                         /*
1536                          * Disable PIC Intrs in the general
1537                          * intr mask register
1538                          */
1539                         writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask);
1540                         temp64 = readq(&bar0->general_int_mask);
1541                         val64 |= temp64;
1542                         writeq(val64, &bar0->general_int_mask);
1543                 }
1544         }
1545
1546         /*  DMA Interrupts */
1547         /*  Enabling/Disabling Tx DMA interrupts */
1548         if (mask & TX_DMA_INTR) {
1549                 /* Enable TxDMA Intrs in the general intr mask register */
1550                 val64 = TXDMA_INT_M;
1551                 if (flag == ENABLE_INTRS) {
1552                         temp64 = readq(&bar0->general_int_mask);
1553                         temp64 &= ~((u64) val64);
1554                         writeq(temp64, &bar0->general_int_mask);
1555                         /*
1556                          * Keep all interrupts other than PFC interrupt
1557                          * and PCC interrupt disabled in DMA level.
1558                          */
1559                         val64 = DISABLE_ALL_INTRS & ~(TXDMA_PFC_INT_M |
1560                                                       TXDMA_PCC_INT_M);
1561                         writeq(val64, &bar0->txdma_int_mask);
1562                         /*
1563                          * Enable only the MISC error 1 interrupt in PFC block
1564                          */
1565                         val64 = DISABLE_ALL_INTRS & (~PFC_MISC_ERR_1);
1566                         writeq(val64, &bar0->pfc_err_mask);
1567                         /*
1568                          * Enable only the FB_ECC error interrupt in PCC block
1569                          */
1570                         val64 = DISABLE_ALL_INTRS & (~PCC_FB_ECC_ERR);
1571                         writeq(val64, &bar0->pcc_err_mask);
1572                 } else if (flag == DISABLE_INTRS) {
1573                         /*
1574                          * Disable TxDMA Intrs in the general intr mask
1575                          * register
1576                          */
1577                         writeq(DISABLE_ALL_INTRS, &bar0->txdma_int_mask);
1578                         writeq(DISABLE_ALL_INTRS, &bar0->pfc_err_mask);
1579                         temp64 = readq(&bar0->general_int_mask);
1580                         val64 |= temp64;
1581                         writeq(val64, &bar0->general_int_mask);
1582                 }
1583         }
1584
1585         /*  Enabling/Disabling Rx DMA interrupts */
1586         if (mask & RX_DMA_INTR) {
1587                 /*  Enable RxDMA Intrs in the general intr mask register */
1588                 val64 = RXDMA_INT_M;
1589                 if (flag == ENABLE_INTRS) {
1590                         temp64 = readq(&bar0->general_int_mask);
1591                         temp64 &= ~((u64) val64);
1592                         writeq(temp64, &bar0->general_int_mask);
1593                         /*
1594                          * All RxDMA block interrupts are disabled for now
1595                          * TODO
1596                          */
1597                         writeq(DISABLE_ALL_INTRS, &bar0->rxdma_int_mask);
1598                 } else if (flag == DISABLE_INTRS) {
1599                         /*
1600                          * Disable RxDMA Intrs in the general intr mask
1601                          * register
1602                          */
1603                         writeq(DISABLE_ALL_INTRS, &bar0->rxdma_int_mask);
1604                         temp64 = readq(&bar0->general_int_mask);
1605                         val64 |= temp64;
1606                         writeq(val64, &bar0->general_int_mask);
1607                 }
1608         }
1609
1610         /*  MAC Interrupts */
1611         /*  Enabling/Disabling MAC interrupts */
1612         if (mask & (TX_MAC_INTR | RX_MAC_INTR)) {
1613                 val64 = TXMAC_INT_M | RXMAC_INT_M;
1614                 if (flag == ENABLE_INTRS) {
1615                         temp64 = readq(&bar0->general_int_mask);
1616                         temp64 &= ~((u64) val64);
1617                         writeq(temp64, &bar0->general_int_mask);
1618                         /*
1619                          * All MAC block error interrupts are disabled for now
1620                          * TODO
1621                          */
1622                 } else if (flag == DISABLE_INTRS) {
1623                         /*
1624                          * Disable MAC Intrs in the general intr mask register
1625                          */
1626                         writeq(DISABLE_ALL_INTRS, &bar0->mac_int_mask);
1627                         writeq(DISABLE_ALL_INTRS,
1628                                &bar0->mac_rmac_err_mask);
1629
1630                         temp64 = readq(&bar0->general_int_mask);
1631                         val64 |= temp64;
1632                         writeq(val64, &bar0->general_int_mask);
1633                 }
1634         }
1635
1636         /*  XGXS Interrupts */
1637         if (mask & (TX_XGXS_INTR | RX_XGXS_INTR)) {
1638                 val64 = TXXGXS_INT_M | RXXGXS_INT_M;
1639                 if (flag == ENABLE_INTRS) {
1640                         temp64 = readq(&bar0->general_int_mask);
1641                         temp64 &= ~((u64) val64);
1642                         writeq(temp64, &bar0->general_int_mask);
1643                         /*
1644                          * All XGXS block error interrupts are disabled for now
1645                          * TODO
1646                          */
1647                         writeq(DISABLE_ALL_INTRS, &bar0->xgxs_int_mask);
1648                 } else if (flag == DISABLE_INTRS) {
1649                         /*
1650                          * Disable MC Intrs in the general intr mask register
1651                          */
1652                         writeq(DISABLE_ALL_INTRS, &bar0->xgxs_int_mask);
1653                         temp64 = readq(&bar0->general_int_mask);
1654                         val64 |= temp64;
1655                         writeq(val64, &bar0->general_int_mask);
1656                 }
1657         }
1658
1659         /*  Memory Controller(MC) interrupts */
1660         if (mask & MC_INTR) {
1661                 val64 = MC_INT_M;
1662                 if (flag == ENABLE_INTRS) {
1663                         temp64 = readq(&bar0->general_int_mask);
1664                         temp64 &= ~((u64) val64);
1665                         writeq(temp64, &bar0->general_int_mask);
1666                         /*
1667                          * Enable all MC Intrs.
1668                          */
1669                         writeq(0x0, &bar0->mc_int_mask);
1670                         writeq(0x0, &bar0->mc_err_mask);
1671                 } else if (flag == DISABLE_INTRS) {
1672                         /*
1673                          * Disable MC Intrs in the general intr mask register
1674                          */
1675                         writeq(DISABLE_ALL_INTRS, &bar0->mc_int_mask);
1676                         temp64 = readq(&bar0->general_int_mask);
1677                         val64 |= temp64;
1678                         writeq(val64, &bar0->general_int_mask);
1679                 }
1680         }
1681
1682
1683         /*  Tx traffic interrupts */
1684         if (mask & TX_TRAFFIC_INTR) {
1685                 val64 = TXTRAFFIC_INT_M;
1686                 if (flag == ENABLE_INTRS) {
1687                         temp64 = readq(&bar0->general_int_mask);
1688                         temp64 &= ~((u64) val64);
1689                         writeq(temp64, &bar0->general_int_mask);
1690                         /*
1691                          * Enable all the Tx side interrupts
1692                          * writing 0 Enables all 64 TX interrupt levels
1693                          */
1694                         writeq(0x0, &bar0->tx_traffic_mask);
1695                 } else if (flag == DISABLE_INTRS) {
1696                         /*
1697                          * Disable Tx Traffic Intrs in the general intr mask
1698                          * register.
1699                          */
1700                         writeq(DISABLE_ALL_INTRS, &bar0->tx_traffic_mask);
1701                         temp64 = readq(&bar0->general_int_mask);
1702                         val64 |= temp64;
1703                         writeq(val64, &bar0->general_int_mask);
1704                 }
1705         }
1706
1707         /*  Rx traffic interrupts */
1708         if (mask & RX_TRAFFIC_INTR) {
1709                 val64 = RXTRAFFIC_INT_M;
1710                 if (flag == ENABLE_INTRS) {
1711                         temp64 = readq(&bar0->general_int_mask);
1712                         temp64 &= ~((u64) val64);
1713                         writeq(temp64, &bar0->general_int_mask);
1714                         /* writing 0 Enables all 8 RX interrupt levels */
1715                         writeq(0x0, &bar0->rx_traffic_mask);
1716                 } else if (flag == DISABLE_INTRS) {
1717                         /*
1718                          * Disable Rx Traffic Intrs in the general intr mask
1719                          * register.
1720                          */
1721                         writeq(DISABLE_ALL_INTRS, &bar0->rx_traffic_mask);
1722                         temp64 = readq(&bar0->general_int_mask);
1723                         val64 |= temp64;
1724                         writeq(val64, &bar0->general_int_mask);
1725                 }
1726         }
1727 }
1728
1729 static int check_prc_pcc_state(u64 val64, int flag, int rev_id, int herc)
1730 {
1731         int ret = 0;
1732
1733         if (flag == FALSE) {
1734                 if ((!herc && (rev_id >= 4)) || herc) {
1735                         if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) &&
1736                             ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
1737                              ADAPTER_STATUS_RC_PRC_QUIESCENT)) {
1738                                 ret = 1;
1739                         }
1740                 }else {
1741                         if (!(val64 & ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE) &&
1742                             ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
1743                              ADAPTER_STATUS_RC_PRC_QUIESCENT)) {
1744                                 ret = 1;
1745                         }
1746                 }
1747         } else {
1748                 if ((!herc && (rev_id >= 4)) || herc) {
1749                         if (((val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) ==
1750                              ADAPTER_STATUS_RMAC_PCC_IDLE) &&
1751                             (!(val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ||
1752                              ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
1753                               ADAPTER_STATUS_RC_PRC_QUIESCENT))) {
1754                                 ret = 1;
1755                         }
1756                 } else {
1757                         if (((val64 & ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE) ==
1758                              ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE) &&
1759                             (!(val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ||
1760                              ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
1761                               ADAPTER_STATUS_RC_PRC_QUIESCENT))) {
1762                                 ret = 1;
1763                         }
1764                 }
1765         }
1766
1767         return ret;
1768 }
1769 /**
1770  *  verify_xena_quiescence - Checks whether the H/W is ready
1771  *  @val64 :  Value read from adapter status register.
1772  *  @flag : indicates if the adapter enable bit was ever written once
1773  *  before.
1774  *  Description: Returns whether the H/W is ready to go or not. Depending
1775  *  on whether adapter enable bit was written or not the comparison
1776  *  differs and the calling function passes the input argument flag to
1777  *  indicate this.
1778  *  Return: 1 If xena is quiescence
1779  *          0 If Xena is not quiescence
1780  */
1781
1782 static int verify_xena_quiescence(nic_t *sp, u64 val64, int flag)
1783 {
1784         int ret = 0, herc;
1785         u64 tmp64 = ~((u64) val64);
1786         int rev_id = get_xena_rev_id(sp->pdev);
1787
1788         herc = (sp->device_type == XFRAME_II_DEVICE);
1789         if (!
1790             (tmp64 &
1791              (ADAPTER_STATUS_TDMA_READY | ADAPTER_STATUS_RDMA_READY |
1792               ADAPTER_STATUS_PFC_READY | ADAPTER_STATUS_TMAC_BUF_EMPTY |
1793               ADAPTER_STATUS_PIC_QUIESCENT | ADAPTER_STATUS_MC_DRAM_READY |
1794               ADAPTER_STATUS_MC_QUEUES_READY | ADAPTER_STATUS_M_PLL_LOCK |
1795               ADAPTER_STATUS_P_PLL_LOCK))) {
1796                 ret = check_prc_pcc_state(val64, flag, rev_id, herc);
1797         }
1798
1799         return ret;
1800 }
1801
1802 /**
1803  * fix_mac_address -  Fix for Mac addr problem on Alpha platforms
1804  * @sp: Pointer to device specifc structure
1805  * Description :
1806  * New procedure to clear mac address reading  problems on Alpha platforms
1807  *
1808  */
1809
1810 void fix_mac_address(nic_t * sp)
1811 {
1812         XENA_dev_config_t __iomem *bar0 = sp->bar0;
1813         u64 val64;
1814         int i = 0;
1815
1816         while (fix_mac[i] != END_SIGN) {
1817                 writeq(fix_mac[i++], &bar0->gpio_control);
1818                 udelay(10);
1819                 val64 = readq(&bar0->gpio_control);
1820         }
1821 }
1822
1823 /**
1824  *  start_nic - Turns the device on
1825  *  @nic : device private variable.
1826  *  Description:
1827  *  This function actually turns the device on. Before this  function is
1828  *  called,all Registers are configured from their reset states
1829  *  and shared memory is allocated but the NIC is still quiescent. On
1830  *  calling this function, the device interrupts are cleared and the NIC is
1831  *  literally switched on by writing into the adapter control register.
1832  *  Return Value:
1833  *  SUCCESS on success and -1 on failure.
1834  */
1835
1836 static int start_nic(struct s2io_nic *nic)
1837 {
1838         XENA_dev_config_t __iomem *bar0 = nic->bar0;
1839         struct net_device *dev = nic->dev;
1840         register u64 val64 = 0;
1841         u16 interruptible;
1842         u16 subid, i;
1843         mac_info_t *mac_control;
1844         struct config_param *config;
1845
1846         mac_control = &nic->mac_control;
1847         config = &nic->config;
1848
1849         /*  PRC Initialization and configuration */
1850         for (i = 0; i < config->rx_ring_num; i++) {
1851                 writeq((u64) mac_control->rings[i].rx_blocks[0].block_dma_addr,
1852                        &bar0->prc_rxd0_n[i]);
1853
1854                 val64 = readq(&bar0->prc_ctrl_n[i]);
1855                 if (nic->config.bimodal)
1856                         val64 |= PRC_CTRL_BIMODAL_INTERRUPT;
1857 #ifndef CONFIG_2BUFF_MODE
1858                 val64 |= PRC_CTRL_RC_ENABLED;
1859 #else
1860                 val64 |= PRC_CTRL_RC_ENABLED | PRC_CTRL_RING_MODE_3;
1861 #endif
1862                 writeq(val64, &bar0->prc_ctrl_n[i]);
1863         }
1864
1865 #ifdef CONFIG_2BUFF_MODE
1866         /* Enabling 2 buffer mode by writing into Rx_pa_cfg reg. */
1867         val64 = readq(&bar0->rx_pa_cfg);
1868         val64 |= RX_PA_CFG_IGNORE_L2_ERR;
1869         writeq(val64, &bar0->rx_pa_cfg);
1870 #endif
1871
1872         /*
1873          * Enabling MC-RLDRAM. After enabling the device, we timeout
1874          * for around 100ms, which is approximately the time required
1875          * for the device to be ready for operation.
1876          */
1877         val64 = readq(&bar0->mc_rldram_mrs);
1878         val64 |= MC_RLDRAM_QUEUE_SIZE_ENABLE | MC_RLDRAM_MRS_ENABLE;
1879         SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_mrs, UF);
1880         val64 = readq(&bar0->mc_rldram_mrs);
1881
1882         msleep(100);    /* Delay by around 100 ms. */
1883
1884         /* Enabling ECC Protection. */
1885         val64 = readq(&bar0->adapter_control);
1886         val64 &= ~ADAPTER_ECC_EN;
1887         writeq(val64, &bar0->adapter_control);
1888
1889         /*
1890          * Clearing any possible Link state change interrupts that
1891          * could have popped up just before Enabling the card.
1892          */
1893         val64 = readq(&bar0->mac_rmac_err_reg);
1894         if (val64)
1895                 writeq(val64, &bar0->mac_rmac_err_reg);
1896
1897         /*
1898          * Verify if the device is ready to be enabled, if so enable
1899          * it.
1900          */
1901         val64 = readq(&bar0->adapter_status);
1902         if (!verify_xena_quiescence(nic, val64, nic->device_enabled_once)) {
1903                 DBG_PRINT(ERR_DBG, "%s: device is not ready, ", dev->name);
1904                 DBG_PRINT(ERR_DBG, "Adapter status reads: 0x%llx\n",
1905                           (unsigned long long) val64);
1906                 return FAILURE;
1907         }
1908
1909         /*  Enable select interrupts */
1910         interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
1911         interruptible |= TX_PIC_INTR | RX_PIC_INTR;
1912         interruptible |= TX_MAC_INTR | RX_MAC_INTR;
1913
1914         en_dis_able_nic_intrs(nic, interruptible, ENABLE_INTRS);
1915
1916         /*
1917          * With some switches, link might be already up at this point.
1918          * Because of this weird behavior, when we enable laser,
1919          * we may not get link. We need to handle this. We cannot
1920          * figure out which switch is misbehaving. So we are forced to
1921          * make a global change.
1922          */
1923
1924         /* Enabling Laser. */
1925         val64 = readq(&bar0->adapter_control);
1926         val64 |= ADAPTER_EOI_TX_ON;
1927         writeq(val64, &bar0->adapter_control);
1928
1929         /* SXE-002: Initialize link and activity LED */
1930         subid = nic->pdev->subsystem_device;
1931         if (((subid & 0xFF) >= 0x07) &&
1932             (nic->device_type == XFRAME_I_DEVICE)) {
1933                 val64 = readq(&bar0->gpio_control);
1934                 val64 |= 0x0000800000000000ULL;
1935                 writeq(val64, &bar0->gpio_control);
1936                 val64 = 0x0411040400000000ULL;
1937                 writeq(val64, (void __iomem *) ((u8 *) bar0 + 0x2700));
1938         }
1939
1940         /*
1941          * Don't see link state interrupts on certain switches, so
1942          * directly scheduling a link state task from here.
1943          */
1944         schedule_work(&nic->set_link_task);
1945
1946         return SUCCESS;
1947 }
1948
1949 /**
1950  *  free_tx_buffers - Free all queued Tx buffers
1951  *  @nic : device private variable.
1952  *  Description:
1953  *  Free all queued Tx buffers.
1954  *  Return Value: void
1955 */
1956
1957 static void free_tx_buffers(struct s2io_nic *nic)
1958 {
1959         struct net_device *dev = nic->dev;
1960         struct sk_buff *skb;
1961         TxD_t *txdp;
1962         int i, j;
1963         mac_info_t *mac_control;
1964         struct config_param *config;
1965         int cnt = 0, frg_cnt;
1966
1967         mac_control = &nic->mac_control;
1968         config = &nic->config;
1969
1970         for (i = 0; i < config->tx_fifo_num; i++) {
1971                 for (j = 0; j < config->tx_cfg[i].fifo_len - 1; j++) {
1972                         txdp = (TxD_t *) mac_control->fifos[i].list_info[j].
1973                             list_virt_addr;
1974                         skb =
1975                             (struct sk_buff *) ((unsigned long) txdp->
1976                                                 Host_Control);
1977                         if (skb == NULL) {
1978                                 memset(txdp, 0, sizeof(TxD_t) *
1979                                        config->max_txds);
1980                                 continue;
1981                         }
1982                         frg_cnt = skb_shinfo(skb)->nr_frags;
1983                         pci_unmap_single(nic->pdev, (dma_addr_t)
1984                                          txdp->Buffer_Pointer,
1985                                          skb->len - skb->data_len,
1986                                          PCI_DMA_TODEVICE);
1987                         if (frg_cnt) {
1988                                 TxD_t *temp;
1989                                 temp = txdp;
1990                                 txdp++;
1991                                 for (j = 0; j < frg_cnt; j++, txdp++) {
1992                                         skb_frag_t *frag =
1993                                             &skb_shinfo(skb)->frags[j];
1994                                         pci_unmap_page(nic->pdev,
1995                                                        (dma_addr_t)
1996                                                        txdp->
1997                                                        Buffer_Pointer,
1998                                                        frag->size,
1999                                                        PCI_DMA_TODEVICE);
2000                                 }
2001                                 txdp = temp;
2002                         }
2003                         dev_kfree_skb(skb);
2004                         memset(txdp, 0, sizeof(TxD_t) * config->max_txds);
2005                         cnt++;
2006                 }
2007                 DBG_PRINT(INTR_DBG,
2008                           "%s:forcibly freeing %d skbs on FIFO%d\n",
2009                           dev->name, cnt, i);
2010                 mac_control->fifos[i].tx_curr_get_info.offset = 0;
2011                 mac_control->fifos[i].tx_curr_put_info.offset = 0;
2012         }
2013 }
2014
2015 /**
2016  *   stop_nic -  To stop the nic
2017  *   @nic ; device private variable.
2018  *   Description:
2019  *   This function does exactly the opposite of what the start_nic()
2020  *   function does. This function is called to stop the device.
2021  *   Return Value:
2022  *   void.
2023  */
2024
2025 static void stop_nic(struct s2io_nic *nic)
2026 {
2027         XENA_dev_config_t __iomem *bar0 = nic->bar0;
2028         register u64 val64 = 0;
2029         u16 interruptible, i;
2030         mac_info_t *mac_control;
2031         struct config_param *config;
2032
2033         mac_control = &nic->mac_control;
2034         config = &nic->config;
2035
2036         /*  Disable all interrupts */
2037         interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
2038         interruptible |= TX_PIC_INTR | RX_PIC_INTR;
2039         interruptible |= TX_MAC_INTR | RX_MAC_INTR;
2040         en_dis_able_nic_intrs(nic, interruptible, DISABLE_INTRS);
2041
2042         /*  Disable PRCs */
2043         for (i = 0; i < config->rx_ring_num; i++) {
2044                 val64 = readq(&bar0->prc_ctrl_n[i]);
2045                 val64 &= ~((u64) PRC_CTRL_RC_ENABLED);
2046                 writeq(val64, &bar0->prc_ctrl_n[i]);
2047         }
2048 }
2049
2050 /**
2051  *  fill_rx_buffers - Allocates the Rx side skbs
2052  *  @nic:  device private variable
2053  *  @ring_no: ring number
2054  *  Description:
2055  *  The function allocates Rx side skbs and puts the physical
2056  *  address of these buffers into the RxD buffer pointers, so that the NIC
2057  *  can DMA the received frame into these locations.
2058  *  The NIC supports 3 receive modes, viz
2059  *  1. single buffer,
2060  *  2. three buffer and
2061  *  3. Five buffer modes.
2062  *  Each mode defines how many fragments the received frame will be split
2063  *  up into by the NIC. The frame is split into L3 header, L4 Header,
2064  *  L4 payload in three buffer mode and in 5 buffer mode, L4 payload itself
2065  *  is split into 3 fragments. As of now only single buffer mode is
2066  *  supported.
2067  *   Return Value:
2068  *  SUCCESS on success or an appropriate -ve value on failure.
2069  */
2070
2071 int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
2072 {
2073         struct net_device *dev = nic->dev;
2074         struct sk_buff *skb;
2075         RxD_t *rxdp;
2076         int off, off1, size, block_no, block_no1;
2077         int offset, offset1;
2078         u32 alloc_tab = 0;
2079         u32 alloc_cnt;
2080         mac_info_t *mac_control;
2081         struct config_param *config;
2082 #ifdef CONFIG_2BUFF_MODE
2083         RxD_t *rxdpnext;
2084         int nextblk;
2085         u64 tmp;
2086         buffAdd_t *ba;
2087         dma_addr_t rxdpphys;
2088 #endif
2089 #ifndef CONFIG_S2IO_NAPI
2090         unsigned long flags;
2091 #endif
2092         RxD_t *first_rxdp = NULL;
2093
2094         mac_control = &nic->mac_control;
2095         config = &nic->config;
2096         alloc_cnt = mac_control->rings[ring_no].pkt_cnt -
2097             atomic_read(&nic->rx_bufs_left[ring_no]);
2098         size = dev->mtu + HEADER_ETHERNET_II_802_3_SIZE +
2099             HEADER_802_2_SIZE + HEADER_SNAP_SIZE;
2100
2101         while (alloc_tab < alloc_cnt) {
2102                 block_no = mac_control->rings[ring_no].rx_curr_put_info.
2103                     block_index;
2104                 block_no1 = mac_control->rings[ring_no].rx_curr_get_info.
2105                     block_index;
2106                 off = mac_control->rings[ring_no].rx_curr_put_info.offset;
2107                 off1 = mac_control->rings[ring_no].rx_curr_get_info.offset;
2108 #ifndef CONFIG_2BUFF_MODE
2109                 offset = block_no * (MAX_RXDS_PER_BLOCK + 1) + off;
2110                 offset1 = block_no1 * (MAX_RXDS_PER_BLOCK + 1) + off1;
2111 #else
2112                 offset = block_no * (MAX_RXDS_PER_BLOCK) + off;
2113                 offset1 = block_no1 * (MAX_RXDS_PER_BLOCK) + off1;
2114 #endif
2115
2116                 rxdp = mac_control->rings[ring_no].rx_blocks[block_no].
2117                     block_virt_addr + off;
2118                 if ((offset == offset1) && (rxdp->Host_Control)) {
2119                         DBG_PRINT(INTR_DBG, "%s: Get and Put", dev->name);
2120                         DBG_PRINT(INTR_DBG, " info equated\n");
2121                         goto end;
2122                 }
2123 #ifndef CONFIG_2BUFF_MODE
2124                 if (rxdp->Control_1 == END_OF_BLOCK) {
2125                         mac_control->rings[ring_no].rx_curr_put_info.
2126                             block_index++;
2127                         mac_control->rings[ring_no].rx_curr_put_info.
2128                             block_index %= mac_control->rings[ring_no].block_count;
2129                         block_no = mac_control->rings[ring_no].rx_curr_put_info.
2130                                 block_index;
2131                         off++;
2132                         off %= (MAX_RXDS_PER_BLOCK + 1);
2133                         mac_control->rings[ring_no].rx_curr_put_info.offset =
2134                             off;
2135                         rxdp = (RxD_t *) ((unsigned long) rxdp->Control_2);
2136                         DBG_PRINT(INTR_DBG, "%s: Next block at: %p\n",
2137                                   dev->name, rxdp);
2138                 }
2139 #ifndef CONFIG_S2IO_NAPI
2140                 spin_lock_irqsave(&nic->put_lock, flags);
2141                 mac_control->rings[ring_no].put_pos =
2142                     (block_no * (MAX_RXDS_PER_BLOCK + 1)) + off;
2143                 spin_unlock_irqrestore(&nic->put_lock, flags);
2144 #endif
2145 #else
2146                 if (rxdp->Host_Control == END_OF_BLOCK) {
2147                         mac_control->rings[ring_no].rx_curr_put_info.
2148                             block_index++;
2149                         mac_control->rings[ring_no].rx_curr_put_info.block_index
2150                             %= mac_control->rings[ring_no].block_count;
2151                         block_no = mac_control->rings[ring_no].rx_curr_put_info
2152                             .block_index;
2153                         off = 0;
2154                         DBG_PRINT(INTR_DBG, "%s: block%d at: 0x%llx\n",
2155                                   dev->name, block_no,
2156                                   (unsigned long long) rxdp->Control_1);
2157                         mac_control->rings[ring_no].rx_curr_put_info.offset =
2158                             off;
2159                         rxdp = mac_control->rings[ring_no].rx_blocks[block_no].
2160                             block_virt_addr;
2161                 }
2162 #ifndef CONFIG_S2IO_NAPI
2163                 spin_lock_irqsave(&nic->put_lock, flags);
2164                 mac_control->rings[ring_no].put_pos = (block_no *
2165                                          (MAX_RXDS_PER_BLOCK + 1)) + off;
2166                 spin_unlock_irqrestore(&nic->put_lock, flags);
2167 #endif
2168 #endif
2169
2170 #ifndef CONFIG_2BUFF_MODE
2171                 if (rxdp->Control_1 & RXD_OWN_XENA)
2172 #else
2173                 if (rxdp->Control_2 & BIT(0))
2174 #endif
2175                 {
2176                         mac_control->rings[ring_no].rx_curr_put_info.
2177                             offset = off;
2178                         goto end;
2179                 }
2180 #ifdef  CONFIG_2BUFF_MODE
2181                 /*
2182                  * RxDs Spanning cache lines will be replenished only
2183                  * if the succeeding RxD is also owned by Host. It
2184                  * will always be the ((8*i)+3) and ((8*i)+6)
2185                  * descriptors for the 48 byte descriptor. The offending
2186                  * decsriptor is of-course the 3rd descriptor.
2187                  */
2188                 rxdpphys = mac_control->rings[ring_no].rx_blocks[block_no].
2189                     block_dma_addr + (off * sizeof(RxD_t));
2190                 if (((u64) (rxdpphys)) % 128 > 80) {
2191                         rxdpnext = mac_control->rings[ring_no].rx_blocks[block_no].
2192                             block_virt_addr + (off + 1);
2193                         if (rxdpnext->Host_Control == END_OF_BLOCK) {
2194                                 nextblk = (block_no + 1) %
2195                                     (mac_control->rings[ring_no].block_count);
2196                                 rxdpnext = mac_control->rings[ring_no].rx_blocks
2197                                     [nextblk].block_virt_addr;
2198                         }
2199                         if (rxdpnext->Control_2 & BIT(0))
2200                                 goto end;
2201                 }
2202 #endif
2203
2204 #ifndef CONFIG_2BUFF_MODE
2205                 skb = dev_alloc_skb(size + NET_IP_ALIGN);
2206 #else
2207                 skb = dev_alloc_skb(dev->mtu + ALIGN_SIZE + BUF0_LEN + 4);
2208 #endif
2209                 if (!skb) {
2210                         DBG_PRINT(ERR_DBG, "%s: Out of ", dev->name);
2211                         DBG_PRINT(ERR_DBG, "memory to allocate SKBs\n");
2212                         if (first_rxdp) {
2213                                 wmb();
2214                                 first_rxdp->Control_1 |= RXD_OWN_XENA;
2215                         }
2216                         return -ENOMEM;
2217                 }
2218 #ifndef CONFIG_2BUFF_MODE
2219                 skb_reserve(skb, NET_IP_ALIGN);
2220                 memset(rxdp, 0, sizeof(RxD_t));
2221                 rxdp->Buffer0_ptr = pci_map_single
2222                     (nic->pdev, skb->data, size, PCI_DMA_FROMDEVICE);
2223                 rxdp->Control_2 &= (~MASK_BUFFER0_SIZE);
2224                 rxdp->Control_2 |= SET_BUFFER0_SIZE(size);
2225                 rxdp->Host_Control = (unsigned long) (skb);
2226                 if (alloc_tab & ((1 << rxsync_frequency) - 1))
2227                         rxdp->Control_1 |= RXD_OWN_XENA;
2228                 off++;
2229                 off %= (MAX_RXDS_PER_BLOCK + 1);
2230                 mac_control->rings[ring_no].rx_curr_put_info.offset = off;
2231 #else
2232                 ba = &mac_control->rings[ring_no].ba[block_no][off];
2233                 skb_reserve(skb, BUF0_LEN);
2234                 tmp = ((unsigned long) skb->data & ALIGN_SIZE);
2235                 if (tmp)
2236                         skb_reserve(skb, (ALIGN_SIZE + 1) - tmp);
2237
2238                 memset(rxdp, 0, sizeof(RxD_t));
2239                 rxdp->Buffer2_ptr = pci_map_single
2240                     (nic->pdev, skb->data, dev->mtu + BUF0_LEN + 4,
2241                      PCI_DMA_FROMDEVICE);
2242                 rxdp->Buffer0_ptr =
2243                     pci_map_single(nic->pdev, ba->ba_0, BUF0_LEN,
2244                                    PCI_DMA_FROMDEVICE);
2245                 rxdp->Buffer1_ptr =
2246                     pci_map_single(nic->pdev, ba->ba_1, BUF1_LEN,
2247                                    PCI_DMA_FROMDEVICE);
2248
2249                 rxdp->Control_2 = SET_BUFFER2_SIZE(dev->mtu + 4);
2250                 rxdp->Control_2 |= SET_BUFFER0_SIZE(BUF0_LEN);
2251                 rxdp->Control_2 |= SET_BUFFER1_SIZE(1); /* dummy. */
2252                 rxdp->Control_2 |= BIT(0);      /* Set Buffer_Empty bit. */
2253                 rxdp->Host_Control = (u64) ((unsigned long) (skb));
2254                 if (alloc_tab & ((1 << rxsync_frequency) - 1))
2255                         rxdp->Control_1 |= RXD_OWN_XENA;
2256                 off++;
2257                 mac_control->rings[ring_no].rx_curr_put_info.offset = off;
2258 #endif
2259                 rxdp->Control_2 |= SET_RXD_MARKER;
2260
2261                 if (!(alloc_tab & ((1 << rxsync_frequency) - 1))) {
2262                         if (first_rxdp) {
2263                                 wmb();
2264                                 first_rxdp->Control_1 |= RXD_OWN_XENA;
2265                         }
2266                         first_rxdp = rxdp;
2267                 }
2268                 atomic_inc(&nic->rx_bufs_left[ring_no]);
2269                 alloc_tab++;
2270         }
2271
2272       end:
2273         /* Transfer ownership of first descriptor to adapter just before
2274          * exiting. Before that, use memory barrier so that ownership
2275          * and other fields are seen by adapter correctly.
2276          */
2277         if (first_rxdp) {
2278                 wmb();
2279                 first_rxdp->Control_1 |= RXD_OWN_XENA;
2280         }
2281
2282         return SUCCESS;
2283 }
2284
2285 /**
2286  *  free_rx_buffers - Frees all Rx buffers
2287  *  @sp: device private variable.
2288  *  Description:
2289  *  This function will free all Rx buffers allocated by host.
2290  *  Return Value:
2291  *  NONE.
2292  */
2293
2294 static void free_rx_buffers(struct s2io_nic *sp)
2295 {
2296         struct net_device *dev = sp->dev;
2297         int i, j, blk = 0, off, buf_cnt = 0;
2298         RxD_t *rxdp;
2299         struct sk_buff *skb;
2300         mac_info_t *mac_control;
2301         struct config_param *config;
2302 #ifdef CONFIG_2BUFF_MODE
2303         buffAdd_t *ba;
2304 #endif
2305
2306         mac_control = &sp->mac_control;
2307         config = &sp->config;
2308
2309         for (i = 0; i < config->rx_ring_num; i++) {
2310                 for (j = 0, blk = 0; j < config->rx_cfg[i].num_rxd; j++) {
2311                         off = j % (MAX_RXDS_PER_BLOCK + 1);
2312                         rxdp = mac_control->rings[i].rx_blocks[blk].
2313                                 block_virt_addr + off;
2314
2315 #ifndef CONFIG_2BUFF_MODE
2316                         if (rxdp->Control_1 == END_OF_BLOCK) {
2317                                 rxdp =
2318                                     (RxD_t *) ((unsigned long) rxdp->
2319                                                Control_2);
2320                                 j++;
2321                                 blk++;
2322                         }
2323 #else
2324                         if (rxdp->Host_Control == END_OF_BLOCK) {
2325                                 blk++;
2326                                 continue;
2327                         }
2328 #endif
2329
2330                         if (!(rxdp->Control_1 & RXD_OWN_XENA)) {
2331                                 memset(rxdp, 0, sizeof(RxD_t));
2332                                 continue;
2333                         }
2334
2335                         skb =
2336                             (struct sk_buff *) ((unsigned long) rxdp->
2337                                                 Host_Control);
2338                         if (skb) {
2339 #ifndef CONFIG_2BUFF_MODE
2340                                 pci_unmap_single(sp->pdev, (dma_addr_t)
2341                                                  rxdp->Buffer0_ptr,
2342                                                  dev->mtu +
2343                                                  HEADER_ETHERNET_II_802_3_SIZE
2344                                                  + HEADER_802_2_SIZE +
2345                                                  HEADER_SNAP_SIZE,
2346                                                  PCI_DMA_FROMDEVICE);
2347 #else
2348                                 ba = &mac_control->rings[i].ba[blk][off];
2349                                 pci_unmap_single(sp->pdev, (dma_addr_t)
2350                                                  rxdp->Buffer0_ptr,
2351                                                  BUF0_LEN,
2352                                                  PCI_DMA_FROMDEVICE);
2353                                 pci_unmap_single(sp->pdev, (dma_addr_t)
2354                                                  rxdp->Buffer1_ptr,
2355                                                  BUF1_LEN,
2356                                                  PCI_DMA_FROMDEVICE);
2357                                 pci_unmap_single(sp->pdev, (dma_addr_t)
2358                                                  rxdp->Buffer2_ptr,
2359                                                  dev->mtu + BUF0_LEN + 4,
2360                                                  PCI_DMA_FROMDEVICE);
2361 #endif
2362                                 dev_kfree_skb(skb);
2363                                 atomic_dec(&sp->rx_bufs_left[i]);
2364                                 buf_cnt++;
2365                         }
2366                         memset(rxdp, 0, sizeof(RxD_t));
2367                 }
2368                 mac_control->rings[i].rx_curr_put_info.block_index = 0;
2369                 mac_control->rings[i].rx_curr_get_info.block_index = 0;
2370                 mac_control->rings[i].rx_curr_put_info.offset = 0;
2371                 mac_control->rings[i].rx_curr_get_info.offset = 0;
2372                 atomic_set(&sp->rx_bufs_left[i], 0);
2373                 DBG_PRINT(INIT_DBG, "%s:Freed 0x%x Rx Buffers on ring%d\n",
2374                           dev->name, buf_cnt, i);
2375         }
2376 }
2377
2378 /**
2379  * s2io_poll - Rx interrupt handler for NAPI support
2380  * @dev : pointer to the device structure.
2381  * @budget : The number of packets that were budgeted to be processed
2382  * during  one pass through the 'Poll" function.
2383  * Description:
2384  * Comes into picture only if NAPI support has been incorporated. It does
2385  * the same thing that rx_intr_handler does, but not in a interrupt context
2386  * also It will process only a given number of packets.
2387  * Return value:
2388  * 0 on success and 1 if there are No Rx packets to be processed.
2389  */
2390
2391 #if defined(CONFIG_S2IO_NAPI)
2392 static int s2io_poll(struct net_device *dev, int *budget)
2393 {
2394         nic_t *nic = dev->priv;
2395         int pkt_cnt = 0, org_pkts_to_process;
2396         mac_info_t *mac_control;
2397         struct config_param *config;
2398         XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
2399         u64 val64;
2400         int i;
2401
2402         atomic_inc(&nic->isr_cnt);
2403         mac_control = &nic->mac_control;
2404         config = &nic->config;
2405
2406         nic->pkts_to_process = *budget;
2407         if (nic->pkts_to_process > dev->quota)
2408                 nic->pkts_to_process = dev->quota;
2409         org_pkts_to_process = nic->pkts_to_process;
2410
2411         val64 = readq(&bar0->rx_traffic_int);
2412         writeq(val64, &bar0->rx_traffic_int);
2413
2414         for (i = 0; i < config->rx_ring_num; i++) {
2415                 rx_intr_handler(&mac_control->rings[i]);
2416                 pkt_cnt = org_pkts_to_process - nic->pkts_to_process;
2417                 if (!nic->pkts_to_process) {
2418                         /* Quota for the current iteration has been met */
2419                         goto no_rx;
2420                 }
2421         }
2422         if (!pkt_cnt)
2423                 pkt_cnt = 1;
2424
2425         dev->quota -= pkt_cnt;
2426         *budget -= pkt_cnt;
2427         netif_rx_complete(dev);
2428
2429         for (i = 0; i < config->rx_ring_num; i++) {
2430                 if (fill_rx_buffers(nic, i) == -ENOMEM) {
2431                         DBG_PRINT(ERR_DBG, "%s:Out of memory", dev->name);
2432                         DBG_PRINT(ERR_DBG, " in Rx Poll!!\n");
2433                         break;
2434                 }
2435         }
2436         /* Re enable the Rx interrupts. */
2437         en_dis_able_nic_intrs(nic, RX_TRAFFIC_INTR, ENABLE_INTRS);
2438         atomic_dec(&nic->isr_cnt);
2439         return 0;
2440
2441 no_rx:
2442         dev->quota -= pkt_cnt;
2443         *budget -= pkt_cnt;
2444
2445         for (i = 0; i < config->rx_ring_num; i++) {
2446                 if (fill_rx_buffers(nic, i) == -ENOMEM) {
2447                         DBG_PRINT(ERR_DBG, "%s:Out of memory", dev->name);
2448                         DBG_PRINT(ERR_DBG, " in Rx Poll!!\n");
2449                         break;
2450                 }
2451         }
2452         atomic_dec(&nic->isr_cnt);
2453         return 1;
2454 }
2455 #endif
2456
2457 /**
2458  *  rx_intr_handler - Rx interrupt handler
2459  *  @nic: device private variable.
2460  *  Description:
2461  *  If the interrupt is because of a received frame or if the
2462  *  receive ring contains fresh as yet un-processed frames,this function is
2463  *  called. It picks out the RxD at which place the last Rx processing had
2464  *  stopped and sends the skb to the OSM's Rx handler and then increments
2465  *  the offset.
2466  *  Return Value:
2467  *  NONE.
2468  */
2469 static void rx_intr_handler(ring_info_t *ring_data)
2470 {
2471         nic_t *nic = ring_data->nic;
2472         struct net_device *dev = (struct net_device *) nic->dev;
2473         int get_block, get_offset, put_block, put_offset, ring_bufs;
2474         rx_curr_get_info_t get_info, put_info;
2475         RxD_t *rxdp;
2476         struct sk_buff *skb;
2477 #ifndef CONFIG_S2IO_NAPI
2478         int pkt_cnt = 0;
2479 #endif
2480         spin_lock(&nic->rx_lock);
2481         if (atomic_read(&nic->card_state) == CARD_DOWN) {
2482                 DBG_PRINT(ERR_DBG, "%s: %s going down for reset\n",
2483                           __FUNCTION__, dev->name);
2484                 spin_unlock(&nic->rx_lock);
2485         }
2486
2487         get_info = ring_data->rx_curr_get_info;
2488         get_block = get_info.block_index;
2489         put_info = ring_data->rx_curr_put_info;
2490         put_block = put_info.block_index;
2491         ring_bufs = get_info.ring_len+1;
2492         rxdp = ring_data->rx_blocks[get_block].block_virt_addr +
2493                     get_info.offset;
2494         get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
2495                 get_info.offset;
2496 #ifndef CONFIG_S2IO_NAPI
2497         spin_lock(&nic->put_lock);
2498         put_offset = ring_data->put_pos;
2499         spin_unlock(&nic->put_lock);
2500 #else
2501         put_offset = (put_block * (MAX_RXDS_PER_BLOCK + 1)) +
2502                 put_info.offset;
2503 #endif
2504         while (RXD_IS_UP2DT(rxdp) &&
2505                (((get_offset + 1) % ring_bufs) != put_offset)) {
2506                 skb = (struct sk_buff *) ((unsigned long)rxdp->Host_Control);
2507                 if (skb == NULL) {
2508                         DBG_PRINT(ERR_DBG, "%s: The skb is ",
2509                                   dev->name);
2510                         DBG_PRINT(ERR_DBG, "Null in Rx Intr\n");
2511                         spin_unlock(&nic->rx_lock);
2512                         return;
2513                 }
2514 #ifndef CONFIG_2BUFF_MODE
2515                 pci_unmap_single(nic->pdev, (dma_addr_t)
2516                                  rxdp->Buffer0_ptr,
2517                                  dev->mtu +
2518                                  HEADER_ETHERNET_II_802_3_SIZE +
2519                                  HEADER_802_2_SIZE +
2520                                  HEADER_SNAP_SIZE,
2521                                  PCI_DMA_FROMDEVICE);
2522 #else
2523                 pci_unmap_single(nic->pdev, (dma_addr_t)
2524                                  rxdp->Buffer0_ptr,
2525                                  BUF0_LEN, PCI_DMA_FROMDEVICE);
2526                 pci_unmap_single(nic->pdev, (dma_addr_t)
2527                                  rxdp->Buffer1_ptr,
2528                                  BUF1_LEN, PCI_DMA_FROMDEVICE);
2529                 pci_unmap_single(nic->pdev, (dma_addr_t)
2530                                  rxdp->Buffer2_ptr,
2531                                  dev->mtu + BUF0_LEN + 4,
2532                                  PCI_DMA_FROMDEVICE);
2533 #endif
2534                 rx_osm_handler(ring_data, rxdp);
2535                 get_info.offset++;
2536                 ring_data->rx_curr_get_info.offset =
2537                     get_info.offset;
2538                 rxdp = ring_data->rx_blocks[get_block].block_virt_addr +
2539                     get_info.offset;
2540                 if (get_info.offset &&
2541                     (!(get_info.offset % MAX_RXDS_PER_BLOCK))) {
2542                         get_info.offset = 0;
2543                         ring_data->rx_curr_get_info.offset
2544                             = get_info.offset;
2545                         get_block++;
2546                         get_block %= ring_data->block_count;
2547                         ring_data->rx_curr_get_info.block_index
2548                             = get_block;
2549                         rxdp = ring_data->rx_blocks[get_block].block_virt_addr;
2550                 }
2551
2552                 get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
2553                             get_info.offset;
2554 #ifdef CONFIG_S2IO_NAPI
2555                 nic->pkts_to_process -= 1;
2556                 if (!nic->pkts_to_process)
2557                         break;
2558 #else
2559                 pkt_cnt++;
2560                 if ((indicate_max_pkts) && (pkt_cnt > indicate_max_pkts))
2561                         break;
2562 #endif
2563         }
2564         spin_unlock(&nic->rx_lock);
2565 }
2566
2567 /**
2568  *  tx_intr_handler - Transmit interrupt handler
2569  *  @nic : device private variable
2570  *  Description:
2571  *  If an interrupt was raised to indicate DMA complete of the
2572  *  Tx packet, this function is called. It identifies the last TxD
2573  *  whose buffer was freed and frees all skbs whose data have already
2574  *  DMA'ed into the NICs internal memory.
2575  *  Return Value:
2576  *  NONE
2577  */
2578
2579 static void tx_intr_handler(fifo_info_t *fifo_data)
2580 {
2581         nic_t *nic = fifo_data->nic;
2582         struct net_device *dev = (struct net_device *) nic->dev;
2583         tx_curr_get_info_t get_info, put_info;
2584         struct sk_buff *skb;
2585         TxD_t *txdlp;
2586         u16 j, frg_cnt;
2587
2588         get_info = fifo_data->tx_curr_get_info;
2589         put_info = fifo_data->tx_curr_put_info;
2590         txdlp = (TxD_t *) fifo_data->list_info[get_info.offset].
2591             list_virt_addr;
2592         while ((!(txdlp->Control_1 & TXD_LIST_OWN_XENA)) &&
2593                (get_info.offset != put_info.offset) &&
2594                (txdlp->Host_Control)) {
2595                 /* Check for TxD errors */
2596                 if (txdlp->Control_1 & TXD_T_CODE) {
2597                         unsigned long long err;
2598                         err = txdlp->Control_1 & TXD_T_CODE;
2599                         DBG_PRINT(ERR_DBG, "***TxD error %llx\n",
2600                                   err);
2601                 }
2602
2603                 skb = (struct sk_buff *) ((unsigned long)
2604                                 txdlp->Host_Control);
2605                 if (skb == NULL) {
2606                         DBG_PRINT(ERR_DBG, "%s: Null skb ",
2607                         __FUNCTION__);
2608                         DBG_PRINT(ERR_DBG, "in Tx Free Intr\n");
2609                         return;
2610                 }
2611
2612                 frg_cnt = skb_shinfo(skb)->nr_frags;
2613                 nic->tx_pkt_count++;
2614
2615                 pci_unmap_single(nic->pdev, (dma_addr_t)
2616                                  txdlp->Buffer_Pointer,
2617                                  skb->len - skb->data_len,
2618                                  PCI_DMA_TODEVICE);
2619                 if (frg_cnt) {
2620                         TxD_t *temp;
2621                         temp = txdlp;
2622                         txdlp++;
2623                         for (j = 0; j < frg_cnt; j++, txdlp++) {
2624                                 skb_frag_t *frag =
2625                                     &skb_shinfo(skb)->frags[j];
2626                                 if (!txdlp->Buffer_Pointer)
2627                                         break;
2628                                 pci_unmap_page(nic->pdev,
2629                                                (dma_addr_t)
2630                                                txdlp->
2631                                                Buffer_Pointer,
2632                                                frag->size,
2633                                                PCI_DMA_TODEVICE);
2634                         }
2635                         txdlp = temp;
2636                 }
2637                 memset(txdlp, 0,
2638                        (sizeof(TxD_t) * fifo_data->max_txds));
2639
2640                 /* Updating the statistics block */
2641                 nic->stats.tx_bytes += skb->len;
2642                 dev_kfree_skb_irq(skb);
2643
2644                 get_info.offset++;
2645                 get_info.offset %= get_info.fifo_len + 1;
2646                 txdlp = (TxD_t *) fifo_data->list_info
2647                     [get_info.offset].list_virt_addr;
2648                 fifo_data->tx_curr_get_info.offset =
2649                     get_info.offset;
2650         }
2651
2652         spin_lock(&nic->tx_lock);
2653         if (netif_queue_stopped(dev))
2654                 netif_wake_queue(dev);
2655         spin_unlock(&nic->tx_lock);
2656 }
2657
2658 /**
2659  *  alarm_intr_handler - Alarm Interrrupt handler
2660  *  @nic: device private variable
2661  *  Description: If the interrupt was neither because of Rx packet or Tx
2662  *  complete, this function is called. If the interrupt was to indicate
2663  *  a loss of link, the OSM link status handler is invoked for any other
2664  *  alarm interrupt the block that raised the interrupt is displayed
2665  *  and a H/W reset is issued.
2666  *  Return Value:
2667  *  NONE
2668 */
2669
2670 static void alarm_intr_handler(struct s2io_nic *nic)
2671 {
2672         struct net_device *dev = (struct net_device *) nic->dev;
2673         XENA_dev_config_t __iomem *bar0 = nic->bar0;
2674         register u64 val64 = 0, err_reg = 0;
2675
2676         /* Handling link status change error Intr */
2677         if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER) {
2678                 err_reg = readq(&bar0->mac_rmac_err_reg);
2679                 writeq(err_reg, &bar0->mac_rmac_err_reg);
2680                 if (err_reg & RMAC_LINK_STATE_CHANGE_INT) {
2681                         schedule_work(&nic->set_link_task);
2682                 }
2683         }
2684
2685         /* Handling Ecc errors */
2686         val64 = readq(&bar0->mc_err_reg);
2687         writeq(val64, &bar0->mc_err_reg);
2688         if (val64 & (MC_ERR_REG_ECC_ALL_SNG | MC_ERR_REG_ECC_ALL_DBL)) {
2689                 if (val64 & MC_ERR_REG_ECC_ALL_DBL) {
2690                         nic->mac_control.stats_info->sw_stat.
2691                                 double_ecc_errs++;
2692                         DBG_PRINT(ERR_DBG, "%s: Device indicates ",
2693                                   dev->name);
2694                         DBG_PRINT(ERR_DBG, "double ECC error!!\n");
2695                         if (nic->device_type != XFRAME_II_DEVICE) {
2696                                 netif_stop_queue(dev);
2697                                 schedule_work(&nic->rst_timer_task);
2698                         }
2699                 } else {
2700                         nic->mac_control.stats_info->sw_stat.
2701                                 single_ecc_errs++;
2702                 }
2703         }
2704
2705         /* In case of a serious error, the device will be Reset. */
2706         val64 = readq(&bar0->serr_source);
2707         if (val64 & SERR_SOURCE_ANY) {
2708                 DBG_PRINT(ERR_DBG, "%s: Device indicates ", dev->name);
2709                 DBG_PRINT(ERR_DBG, "serious error!!\n");
2710                 netif_stop_queue(dev);
2711                 schedule_work(&nic->rst_timer_task);
2712         }
2713
2714         /*
2715          * Also as mentioned in the latest Errata sheets if the PCC_FB_ECC
2716          * Error occurs, the adapter will be recycled by disabling the
2717          * adapter enable bit and enabling it again after the device
2718          * becomes Quiescent.
2719          */
2720         val64 = readq(&bar0->pcc_err_reg);
2721         writeq(val64, &bar0->pcc_err_reg);
2722         if (val64 & PCC_FB_ECC_DB_ERR) {
2723                 u64 ac = readq(&bar0->adapter_control);
2724                 ac &= ~(ADAPTER_CNTL_EN);
2725                 writeq(ac, &bar0->adapter_control);
2726                 ac = readq(&bar0->adapter_control);
2727                 schedule_work(&nic->set_link_task);
2728         }
2729
2730         /* Other type of interrupts are not being handled now,  TODO */
2731 }
2732
2733 /**
2734  *  wait_for_cmd_complete - waits for a command to complete.
2735  *  @sp : private member of the device structure, which is a pointer to the
2736  *  s2io_nic structure.
2737  *  Description: Function that waits for a command to Write into RMAC
2738  *  ADDR DATA registers to be completed and returns either success or
2739  *  error depending on whether the command was complete or not.
2740  *  Return value:
2741  *   SUCCESS on success and FAILURE on failure.
2742  */
2743
2744 int wait_for_cmd_complete(nic_t * sp)
2745 {
2746         XENA_dev_config_t __iomem *bar0 = sp->bar0;
2747         int ret = FAILURE, cnt = 0;
2748         u64 val64;
2749
2750         while (TRUE) {
2751                 val64 = readq(&bar0->rmac_addr_cmd_mem);
2752                 if (!(val64 & RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING)) {
2753                         ret = SUCCESS;
2754                         break;
2755                 }
2756                 msleep(50);
2757                 if (cnt++ > 10)
2758                         break;
2759         }
2760
2761         return ret;
2762 }
2763
2764 /**
2765  *  s2io_reset - Resets the card.
2766  *  @sp : private member of the device structure.
2767  *  Description: Function to Reset the card. This function then also
2768  *  restores the previously saved PCI configuration space registers as
2769  *  the card reset also resets the configuration space.
2770  *  Return value:
2771  *  void.
2772  */
2773
2774 void s2io_reset(nic_t * sp)
2775 {
2776         XENA_dev_config_t __iomem *bar0 = sp->bar0;
2777         u64 val64;
2778         u16 subid, pci_cmd;
2779
2780         /* Back up  the PCI-X CMD reg, dont want to lose MMRBC, OST settings */
2781         pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, &(pci_cmd));
2782
2783         val64 = SW_RESET_ALL;
2784         writeq(val64, &bar0->sw_reset);
2785
2786         /*
2787          * At this stage, if the PCI write is indeed completed, the
2788          * card is reset and so is the PCI Config space of the device.
2789          * So a read cannot be issued at this stage on any of the
2790          * registers to ensure the write into "sw_reset" register
2791          * has gone through.
2792          * Question: Is there any system call that will explicitly force
2793          * all the write commands still pending on the bus to be pushed
2794          * through?
2795          * As of now I'am just giving a 250ms delay and hoping that the
2796          * PCI write to sw_reset register is done by this time.
2797          */
2798         msleep(250);
2799
2800         /* Restore the PCI state saved during initialization. */
2801         pci_restore_state(sp->pdev);
2802         pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
2803                                      pci_cmd);
2804         s2io_init_pci(sp);
2805
2806         msleep(250);
2807
2808         /* Set swapper to enable I/O register access */
2809         s2io_set_swapper(sp);
2810
2811         /* Clear certain PCI/PCI-X fields after reset */
2812         if (sp->device_type == XFRAME_II_DEVICE) {
2813                 /* Clear parity err detect bit */
2814                 pci_write_config_word(sp->pdev, PCI_STATUS, 0x8000);
2815
2816                 /* Clearing PCIX Ecc status register */
2817                 pci_write_config_dword(sp->pdev, 0x68, 0x7C);
2818
2819                 /* Clearing PCI_STATUS error reflected here */
2820                 writeq(BIT(62), &bar0->txpic_int_reg);
2821         }
2822
2823         /* Reset device statistics maintained by OS */
2824         memset(&sp->stats, 0, sizeof (struct net_device_stats));
2825
2826         /* SXE-002: Configure link and activity LED to turn it off */
2827         subid = sp->pdev->subsystem_device;
2828         if (((subid & 0xFF) >= 0x07) &&
2829             (sp->device_type == XFRAME_I_DEVICE)) {
2830                 val64 = readq(&bar0->gpio_control);
2831                 val64 |= 0x0000800000000000ULL;
2832                 writeq(val64, &bar0->gpio_control);
2833                 val64 = 0x0411040400000000ULL;
2834                 writeq(val64, (void __iomem *) ((u8 *) bar0 + 0x2700));
2835         }
2836
2837         /*
2838          * Clear spurious ECC interrupts that would have occured on
2839          * XFRAME II cards after reset.
2840          */
2841         if (sp->device_type == XFRAME_II_DEVICE) {
2842                 val64 = readq(&bar0->pcc_err_reg);
2843                 writeq(val64, &bar0->pcc_err_reg);
2844         }
2845
2846         sp->device_enabled_once = FALSE;
2847 }
2848
2849 /**
2850  *  s2io_set_swapper - to set the swapper controle on the card
2851  *  @sp : private member of the device structure,
2852  *  pointer to the s2io_nic structure.
2853  *  Description: Function to set the swapper control on the card
2854  *  correctly depending on the 'endianness' of the system.
2855  *  Return value:
2856  *  SUCCESS on success and FAILURE on failure.
2857  */
2858
2859 int s2io_set_swapper(nic_t * sp)
2860 {
2861         struct net_device *dev = sp->dev;
2862         XENA_dev_config_t __iomem *bar0 = sp->bar0;
2863         u64 val64, valt, valr;
2864
2865         /*
2866          * Set proper endian settings and verify the same by reading
2867          * the PIF Feed-back register.
2868          */
2869
2870         val64 = readq(&bar0->pif_rd_swapper_fb);
2871         if (val64 != 0x0123456789ABCDEFULL) {
2872                 int i = 0;
2873                 u64 value[] = { 0xC30000C3C30000C3ULL,   /* FE=1, SE=1 */
2874                                 0x8100008181000081ULL,  /* FE=1, SE=0 */
2875                                 0x4200004242000042ULL,  /* FE=0, SE=1 */
2876                                 0};                     /* FE=0, SE=0 */
2877
2878                 while(i<4) {
2879                         writeq(value[i], &bar0->swapper_ctrl);
2880                         val64 = readq(&bar0->pif_rd_swapper_fb);
2881                         if (val64 == 0x0123456789ABCDEFULL)
2882                                 break;
2883                         i++;
2884                 }
2885                 if (i == 4) {
2886                         DBG_PRINT(ERR_DBG, "%s: Endian settings are wrong, ",
2887                                 dev->name);
2888                         DBG_PRINT(ERR_DBG, "feedback read %llx\n",
2889                                 (unsigned long long) val64);
2890                         return FAILURE;
2891                 }
2892                 valr = value[i];
2893         } else {
2894                 valr = readq(&bar0->swapper_ctrl);
2895         }
2896
2897         valt = 0x0123456789ABCDEFULL;
2898         writeq(valt, &bar0->xmsi_address);
2899         val64 = readq(&bar0->xmsi_address);
2900
2901         if(val64 != valt) {
2902                 int i = 0;
2903                 u64 value[] = { 0x00C3C30000C3C300ULL,  /* FE=1, SE=1 */
2904                                 0x0081810000818100ULL,  /* FE=1, SE=0 */
2905                                 0x0042420000424200ULL,  /* FE=0, SE=1 */
2906                                 0};                     /* FE=0, SE=0 */
2907
2908                 while(i<4) {
2909                         writeq((value[i] | valr), &bar0->swapper_ctrl);
2910                         writeq(valt, &bar0->xmsi_address);
2911                         val64 = readq(&bar0->xmsi_address);
2912                         if(val64 == valt)
2913                                 break;
2914                         i++;
2915                 }
2916                 if(i == 4) {
2917                         unsigned long long x = val64;
2918                         DBG_PRINT(ERR_DBG, "Write failed, Xmsi_addr ");
2919                         DBG_PRINT(ERR_DBG, "reads:0x%llx\n", x);
2920                         return FAILURE;
2921                 }
2922         }
2923         val64 = readq(&bar0->swapper_ctrl);
2924         val64 &= 0xFFFF000000000000ULL;
2925
2926 #ifdef  __BIG_ENDIAN
2927         /*
2928          * The device by default set to a big endian format, so a
2929          * big endian driver need not set anything.
2930          */
2931         val64 |= (SWAPPER_CTRL_TXP_FE |
2932                  SWAPPER_CTRL_TXP_SE |
2933                  SWAPPER_CTRL_TXD_R_FE |
2934                  SWAPPER_CTRL_TXD_W_FE |
2935                  SWAPPER_CTRL_TXF_R_FE |
2936                  SWAPPER_CTRL_RXD_R_FE |
2937                  SWAPPER_CTRL_RXD_W_FE |
2938                  SWAPPER_CTRL_RXF_W_FE |
2939                  SWAPPER_CTRL_XMSI_FE |
2940                  SWAPPER_CTRL_XMSI_SE |
2941                  SWAPPER_CTRL_STATS_FE | SWAPPER_CTRL_STATS_SE);
2942         writeq(val64, &bar0->swapper_ctrl);
2943 #else
2944         /*
2945          * Initially we enable all bits to make it accessible by the
2946          * driver, then we selectively enable only those bits that
2947          * we want to set.
2948          */
2949         val64 |= (SWAPPER_CTRL_TXP_FE |
2950                  SWAPPER_CTRL_TXP_SE |
2951                  SWAPPER_CTRL_TXD_R_FE |
2952                  SWAPPER_CTRL_TXD_R_SE |
2953                  SWAPPER_CTRL_TXD_W_FE |
2954                  SWAPPER_CTRL_TXD_W_SE |
2955                  SWAPPER_CTRL_TXF_R_FE |
2956                  SWAPPER_CTRL_RXD_R_FE |
2957                  SWAPPER_CTRL_RXD_R_SE |
2958                  SWAPPER_CTRL_RXD_W_FE |
2959                  SWAPPER_CTRL_RXD_W_SE |
2960                  SWAPPER_CTRL_RXF_W_FE |
2961                  SWAPPER_CTRL_XMSI_FE |
2962                  SWAPPER_CTRL_XMSI_SE |
2963                  SWAPPER_CTRL_STATS_FE | SWAPPER_CTRL_STATS_SE);
2964         writeq(val64, &bar0->swapper_ctrl);
2965 #endif
2966         val64 = readq(&bar0->swapper_ctrl);
2967
2968         /*
2969          * Verifying if endian settings are accurate by reading a
2970          * feedback register.
2971          */
2972         val64 = readq(&bar0->pif_rd_swapper_fb);
2973         if (val64 != 0x0123456789ABCDEFULL) {
2974                 /* Endian settings are incorrect, calls for another dekko. */
2975                 DBG_PRINT(ERR_DBG, "%s: Endian settings are wrong, ",
2976                           dev->name);
2977                 DBG_PRINT(ERR_DBG, "feedback read %llx\n",
2978                           (unsigned long long) val64);
2979                 return FAILURE;
2980         }
2981
2982         return SUCCESS;
2983 }
2984
2985 /* ********************************************************* *
2986  * Functions defined below concern the OS part of the driver *
2987  * ********************************************************* */
2988
2989 /**
2990  *  s2io_open - open entry point of the driver
2991  *  @dev : pointer to the device structure.
2992  *  Description:
2993  *  This function is the open entry point of the driver. It mainly calls a
2994  *  function to allocate Rx buffers and inserts them into the buffer
2995  *  descriptors and then enables the Rx part of the NIC.
2996  *  Return value:
2997  *  0 on success and an appropriate (-)ve integer as defined in errno.h
2998  *   file on failure.
2999  */
3000
3001 int s2io_open(struct net_device *dev)
3002 {
3003         nic_t *sp = dev->priv;
3004         int err = 0;
3005
3006         /*
3007          * Make sure you have link off by default every time
3008          * Nic is initialized
3009          */
3010         netif_carrier_off(dev);
3011         sp->last_link_state = 0;
3012
3013         /* Initialize H/W and enable interrupts */
3014         if (s2io_card_up(sp)) {
3015                 DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",
3016                           dev->name);
3017                 err = -ENODEV;
3018                 goto hw_init_failed;
3019         }
3020
3021         /* After proper initialization of H/W, register ISR */
3022         err = request_irq((int) sp->pdev->irq, s2io_isr, SA_SHIRQ,
3023                           sp->name, dev);
3024         if (err) {
3025                 DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n",
3026                           dev->name);
3027                 goto isr_registration_failed;
3028         }
3029
3030         if (s2io_set_mac_addr(dev, dev->dev_addr) == FAILURE) {
3031                 DBG_PRINT(ERR_DBG, "Set Mac Address Failed\n");
3032                 err = -ENODEV;
3033                 goto setting_mac_address_failed;
3034         }
3035
3036         netif_start_queue(dev);
3037         return 0;
3038
3039 setting_mac_address_failed:
3040         free_irq(sp->pdev->irq, dev);
3041 isr_registration_failed:
3042         del_timer_sync(&sp->alarm_timer);
3043         s2io_reset(sp);
3044 hw_init_failed:
3045         return err;
3046 }
3047
3048 /**
3049  *  s2io_close -close entry point of the driver
3050  *  @dev : device pointer.
3051  *  Description:
3052  *  This is the stop entry point of the driver. It needs to undo exactly
3053  *  whatever was done by the open entry point,thus it's usually referred to
3054  *  as the close function.Among other things this function mainly stops the
3055  *  Rx side of the NIC and frees all the Rx buffers in the Rx rings.
3056  *  Return value:
3057  *  0 on success and an appropriate (-)ve integer as defined in errno.h
3058  *  file on failure.
3059  */
3060
3061 int s2io_close(struct net_device *dev)
3062 {
3063         nic_t *sp = dev->priv;
3064         flush_scheduled_work();
3065         netif_stop_queue(dev);
3066         /* Reset card, kill tasklet and free Tx and Rx buffers. */
3067         s2io_card_down(sp);
3068
3069         free_irq(sp->pdev->irq, dev);
3070         sp->device_close_flag = TRUE;   /* Device is shut down. */
3071         return 0;
3072 }
3073
3074 /**
3075  *  s2io_xmit - Tx entry point of te driver
3076  *  @skb : the socket buffer containing the Tx data.
3077  *  @dev : device pointer.
3078  *  Description :
3079  *  This function is the Tx entry point of the driver. S2IO NIC supports
3080  *  certain protocol assist features on Tx side, namely  CSO, S/G, LSO.
3081  *  NOTE: when device cant queue the pkt,just the trans_start variable will
3082  *  not be upadted.
3083  *  Return value:
3084  *  0 on success & 1 on failure.
3085  */
3086
3087 int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
3088 {
3089         nic_t *sp = dev->priv;
3090         u16 frg_cnt, frg_len, i, queue, queue_len, put_off, get_off;
3091         register u64 val64;
3092         TxD_t *txdp;
3093         TxFIFO_element_t __iomem *tx_fifo;
3094         unsigned long flags;
3095 #ifdef NETIF_F_TSO
3096         int mss;
3097 #endif
3098         u16 vlan_tag = 0;
3099         int vlan_priority = 0;
3100         mac_info_t *mac_control;
3101         struct config_param *config;
3102
3103         mac_control = &sp->mac_control;
3104         config = &sp->config;
3105
3106         DBG_PRINT(TX_DBG, "%s: In Neterion Tx routine\n", dev->name);
3107         spin_lock_irqsave(&sp->tx_lock, flags);
3108         if (atomic_read(&sp->card_state) == CARD_DOWN) {
3109                 DBG_PRINT(TX_DBG, "%s: Card going down for reset\n",
3110                           dev->name);
3111                 spin_unlock_irqrestore(&sp->tx_lock, flags);
3112                 dev_kfree_skb(skb);
3113                 return 0;
3114         }
3115
3116         queue = 0;
3117
3118         /* Get Fifo number to Transmit based on vlan priority */
3119         if (sp->vlgrp && vlan_tx_tag_present(skb)) {
3120                 vlan_tag = vlan_tx_tag_get(skb);
3121                 vlan_priority = vlan_tag >> 13;
3122                 queue = config->fifo_mapping[vlan_priority];
3123         }
3124
3125         put_off = (u16) mac_control->fifos[queue].tx_curr_put_info.offset;
3126         get_off = (u16) mac_control->fifos[queue].tx_curr_get_info.offset;
3127         txdp = (TxD_t *) mac_control->fifos[queue].list_info[put_off].
3128                 list_virt_addr;
3129
3130         queue_len = mac_control->fifos[queue].tx_curr_put_info.fifo_len + 1;
3131         /* Avoid "put" pointer going beyond "get" pointer */
3132         if (txdp->Host_Control || (((put_off + 1) % queue_len) == get_off)) {
3133                 DBG_PRINT(ERR_DBG, "Error in xmit, No free TXDs.\n");
3134                 netif_stop_queue(dev);
3135                 dev_kfree_skb(skb);
3136                 spin_unlock_irqrestore(&sp->tx_lock, flags);
3137                 return 0;
3138         }
3139
3140         /* A buffer with no data will be dropped */
3141         if (!skb->len) {
3142                 DBG_PRINT(TX_DBG, "%s:Buffer has no data..\n", dev->name);
3143                 dev_kfree_skb(skb);
3144                 spin_unlock_irqrestore(&sp->tx_lock, flags);
3145                 return 0;
3146         }
3147
3148 #ifdef NETIF_F_TSO
3149         mss = skb_shinfo(skb)->tso_size;
3150         if (mss) {
3151                 txdp->Control_1 |= TXD_TCP_LSO_EN;
3152                 txdp->Control_1 |= TXD_TCP_LSO_MSS(mss);
3153         }
3154 #endif
3155
3156         frg_cnt = skb_shinfo(skb)->nr_frags;
3157         frg_len = skb->len - skb->data_len;
3158
3159         txdp->Buffer_Pointer = pci_map_single
3160             (sp->pdev, skb->data, frg_len, PCI_DMA_TODEVICE);
3161         txdp->Host_Control = (unsigned long) skb;
3162         if (skb->ip_summed == CHECKSUM_HW) {
3163                 txdp->Control_2 |=
3164                     (TXD_TX_CKO_IPV4_EN | TXD_TX_CKO_TCP_EN |
3165                      TXD_TX_CKO_UDP_EN);
3166         }
3167
3168         txdp->Control_2 |= config->tx_intr_type;
3169
3170         if (sp->vlgrp && vlan_tx_tag_present(skb)) {
3171                 txdp->Control_2 |= TXD_VLAN_ENABLE;
3172                 txdp->Control_2 |= TXD_VLAN_TAG(vlan_tag);
3173         }
3174
3175         txdp->Control_1 |= (TXD_BUFFER0_SIZE(frg_len) |
3176                             TXD_GATHER_CODE_FIRST);
3177         txdp->Control_1 |= TXD_LIST_OWN_XENA;
3178
3179         /* For fragmented SKB. */
3180         for (i = 0; i < frg_cnt; i++) {
3181                 skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
3182                 /* A '0' length fragment will be ignored */
3183                 if (!frag->size)
3184                         continue;
3185                 txdp++;
3186                 txdp->Buffer_Pointer = (u64) pci_map_page
3187                     (sp->pdev, frag->page, frag->page_offset,
3188                      frag->size, PCI_DMA_TODEVICE);
3189                 txdp->Control_1 |= TXD_BUFFER0_SIZE(frag->size);
3190         }
3191         txdp->Control_1 |= TXD_GATHER_CODE_LAST;
3192
3193         tx_fifo = mac_control->tx_FIFO_start[queue];
3194         val64 = mac_control->fifos[queue].list_info[put_off].list_phy_addr;
3195         writeq(val64, &tx_fifo->TxDL_Pointer);
3196
3197         val64 = (TX_FIFO_LAST_TXD_NUM(frg_cnt) | TX_FIFO_FIRST_LIST |
3198                  TX_FIFO_LAST_LIST);
3199
3200 #ifdef NETIF_F_TSO
3201         if (mss)
3202                 val64 |= TX_FIFO_SPECIAL_FUNC;
3203 #endif
3204         writeq(val64, &tx_fifo->List_Control);
3205
3206         mmiowb();
3207
3208         put_off++;
3209         put_off %= mac_control->fifos[queue].tx_curr_put_info.fifo_len + 1;
3210         mac_control->fifos[queue].tx_curr_put_info.offset = put_off;
3211
3212         /* Avoid "put" pointer going beyond "get" pointer */
3213         if (((put_off + 1) % queue_len) == get_off) {
3214                 DBG_PRINT(TX_DBG,
3215                           "No free TxDs for xmit, Put: 0x%x Get:0x%x\n",
3216                           put_off, get_off);
3217                 netif_stop_queue(dev);
3218         }
3219
3220         dev->trans_start = jiffies;
3221         spin_unlock_irqrestore(&sp->tx_lock, flags);
3222
3223         return 0;
3224 }
3225
3226 static void
3227 s2io_alarm_handle(unsigned long data)
3228 {
3229         nic_t *sp = (nic_t *)data;
3230
3231         alarm_intr_handler(sp);
3232         mod_timer(&sp->alarm_timer, jiffies + HZ / 2);
3233 }
3234
3235 static void s2io_txpic_intr_handle(nic_t *sp)
3236 {
3237         XENA_dev_config_t *bar0 = (XENA_dev_config_t *) sp->bar0;
3238         u64 val64;
3239
3240         val64 = readq(&bar0->pic_int_status);
3241         if (val64 & PIC_INT_GPIO) {
3242                 val64 = readq(&bar0->gpio_int_reg);
3243                 if ((val64 & GPIO_INT_REG_LINK_DOWN) &&
3244                     (val64 & GPIO_INT_REG_LINK_UP)) {
3245                         val64 |=  GPIO_INT_REG_LINK_DOWN;
3246                         val64 |= GPIO_INT_REG_LINK_UP;
3247                         writeq(val64, &bar0->gpio_int_reg);
3248                         goto masking;
3249                 }
3250
3251                 if (((sp->last_link_state == LINK_UP) &&
3252                         (val64 & GPIO_INT_REG_LINK_DOWN)) ||
3253                 ((sp->last_link_state == LINK_DOWN) &&
3254                 (val64 & GPIO_INT_REG_LINK_UP))) {
3255                         val64 = readq(&bar0->gpio_int_mask);
3256                         val64 |=  GPIO_INT_MASK_LINK_DOWN;
3257                         val64 |= GPIO_INT_MASK_LINK_UP;
3258                         writeq(val64, &bar0->gpio_int_mask);
3259                         s2io_set_link((unsigned long)sp);
3260                 }
3261 masking:
3262                 if (sp->last_link_state == LINK_UP) {
3263                         /*enable down interrupt */
3264                         val64 = readq(&bar0->gpio_int_mask);
3265                         /* unmasks link down intr */
3266                         val64 &=  ~GPIO_INT_MASK_LINK_DOWN;
3267                         /* masks link up intr */
3268                         val64 |= GPIO_INT_MASK_LINK_UP;
3269                         writeq(val64, &bar0->gpio_int_mask);
3270                 } else {
3271                         /*enable UP Interrupt */
3272                         val64 = readq(&bar0->gpio_int_mask);
3273                         /* unmasks link up interrupt */
3274                         val64 &= ~GPIO_INT_MASK_LINK_UP;
3275                         /* masks link down interrupt */
3276                         val64 |=  GPIO_INT_MASK_LINK_DOWN;
3277                         writeq(val64, &bar0->gpio_int_mask);
3278                 }
3279         }
3280 }
3281
3282 /**
3283  *  s2io_isr - ISR handler of the device .
3284  *  @irq: the irq of the device.
3285  *  @dev_id: a void pointer to the dev structure of the NIC.
3286  *  @pt_regs: pointer to the registers pushed on the stack.
3287  *  Description:  This function is the ISR handler of the device. It
3288  *  identifies the reason for the interrupt and calls the relevant
3289  *  service routines. As a contongency measure, this ISR allocates the
3290  *  recv buffers, if their numbers are below the panic value which is
3291  *  presently set to 25% of the original number of rcv buffers allocated.
3292  *  Return value:
3293  *   IRQ_HANDLED: will be returned if IRQ was handled by this routine
3294  *   IRQ_NONE: will be returned if interrupt is not from our device
3295  */
3296 static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs)
3297 {
3298         struct net_device *dev = (struct net_device *) dev_id;
3299         nic_t *sp = dev->priv;
3300         XENA_dev_config_t __iomem *bar0 = sp->bar0;
3301         int i;
3302         u64 reason = 0, val64;
3303         mac_info_t *mac_control;
3304         struct config_param *config;
3305
3306         atomic_inc(&sp->isr_cnt);
3307         mac_control = &sp->mac_control;
3308         config = &sp->config;
3309
3310         /*
3311          * Identify the cause for interrupt and call the appropriate
3312          * interrupt handler. Causes for the interrupt could be;
3313          * 1. Rx of packet.
3314          * 2. Tx complete.
3315          * 3. Link down.
3316          * 4. Error in any functional blocks of the NIC.
3317          */
3318         reason = readq(&bar0->general_int_status);
3319
3320         if (!reason) {
3321                 /* The interrupt was not raised by Xena. */
3322                 atomic_dec(&sp->isr_cnt);
3323                 return IRQ_NONE;
3324         }
3325
3326 #ifdef CONFIG_S2IO_NAPI
3327         if (reason & GEN_INTR_RXTRAFFIC) {
3328                 if (netif_rx_schedule_prep(dev)) {
3329                         en_dis_able_nic_intrs(sp, RX_TRAFFIC_INTR,
3330                                               DISABLE_INTRS);
3331                         __netif_rx_schedule(dev);
3332                 }
3333         }
3334 #else
3335         /* If Intr is because of Rx Traffic */
3336         if (reason & GEN_INTR_RXTRAFFIC) {
3337                 /*
3338                  * rx_traffic_int reg is an R1 register, writing all 1's
3339                  * will ensure that the actual interrupt causing bit get's
3340                  * cleared and hence a read can be avoided.
3341                  */
3342                 val64 = 0xFFFFFFFFFFFFFFFFULL;
3343                 writeq(val64, &bar0->rx_traffic_int);
3344                 for (i = 0; i < config->rx_ring_num; i++) {
3345                         rx_intr_handler(&mac_control->rings[i]);
3346                 }
3347         }
3348 #endif
3349
3350         /* If Intr is because of Tx Traffic */
3351         if (reason & GEN_INTR_TXTRAFFIC) {
3352                 /*
3353                  * tx_traffic_int reg is an R1 register, writing all 1's
3354                  * will ensure that the actual interrupt causing bit get's
3355                  * cleared and hence a read can be avoided.
3356                  */
3357                 val64 = 0xFFFFFFFFFFFFFFFFULL;
3358                 writeq(val64, &bar0->tx_traffic_int);
3359
3360                 for (i = 0; i < config->tx_fifo_num; i++)
3361                         tx_intr_handler(&mac_control->fifos[i]);
3362         }
3363
3364         if (reason & GEN_INTR_TXPIC)
3365                 s2io_txpic_intr_handle(sp);
3366         /*
3367          * If the Rx buffer count is below the panic threshold then
3368          * reallocate the buffers from the interrupt handler itself,
3369          * else schedule a tasklet to reallocate the buffers.
3370          */
3371 #ifndef CONFIG_S2IO_NAPI
3372         for (i = 0; i < config->rx_ring_num; i++) {
3373                 int ret;
3374                 int rxb_size = atomic_read(&sp->rx_bufs_left[i]);
3375                 int level = rx_buffer_level(sp, rxb_size, i);
3376
3377                 if ((level == PANIC) && (!TASKLET_IN_USE)) {
3378                         DBG_PRINT(INTR_DBG, "%s: Rx BD hit ", dev->name);
3379                         DBG_PRINT(INTR_DBG, "PANIC levels\n");
3380                         if ((ret = fill_rx_buffers(sp, i)) == -ENOMEM) {
3381                                 DBG_PRINT(ERR_DBG, "%s:Out of memory",
3382                                           dev->name);
3383                                 DBG_PRINT(ERR_DBG, " in ISR!!\n");
3384                                 clear_bit(0, (&sp->tasklet_status));
3385                                 atomic_dec(&sp->isr_cnt);
3386                                 return IRQ_HANDLED;
3387                         }
3388                         clear_bit(0, (&sp->tasklet_status));
3389                 } else if (level == LOW) {
3390                         tasklet_schedule(&sp->task);
3391                 }
3392         }
3393 #endif
3394
3395         atomic_dec(&sp->isr_cnt);
3396         return IRQ_HANDLED;
3397 }
3398
3399 /**
3400  * s2io_updt_stats -
3401  */
3402 static void s2io_updt_stats(nic_t *sp)
3403 {
3404         XENA_dev_config_t __iomem *bar0 = sp->bar0;
3405         u64 val64;
3406         int cnt = 0;
3407
3408         if (atomic_read(&sp->card_state) == CARD_UP) {
3409                 /* Apprx 30us on a 133 MHz bus */
3410                 val64 = SET_UPDT_CLICKS(10) |
3411                         STAT_CFG_ONE_SHOT_EN | STAT_CFG_STAT_EN;
3412                 writeq(val64, &bar0->stat_cfg);
3413                 do {
3414                         udelay(100);
3415                         val64 = readq(&bar0->stat_cfg);
3416                         if (!(val64 & BIT(0)))
3417                                 break;
3418                         cnt++;
3419                         if (cnt == 5)
3420                                 break; /* Updt failed */
3421                 } while(1);
3422         }
3423 }
3424
3425 /**
3426  *  s2io_get_stats - Updates the device statistics structure.
3427  *  @dev : pointer to the device structure.
3428  *  Description:
3429  *  This function updates the device statistics structure in the s2io_nic
3430  *  structure and returns a pointer to the same.
3431  *  Return value:
3432  *  pointer to the updated net_device_stats structure.
3433  */
3434
3435 struct net_device_stats *s2io_get_stats(struct net_device *dev)
3436 {
3437         nic_t *sp = dev->priv;
3438         mac_info_t *mac_control;
3439         struct config_param *config;
3440
3441
3442         mac_control = &sp->mac_control;
3443         config = &sp->config;
3444
3445         /* Configure Stats for immediate updt */
3446         s2io_updt_stats(sp);
3447
3448         sp->stats.tx_packets =
3449                 le32_to_cpu(mac_control->stats_info->tmac_frms);
3450         sp->stats.tx_errors =
3451                 le32_to_cpu(mac_control->stats_info->tmac_any_err_frms);
3452         sp->stats.rx_errors =
3453                 le32_to_cpu(mac_control->stats_info->rmac_drop_frms);
3454         sp->stats.multicast =
3455                 le32_to_cpu(mac_control->stats_info->rmac_vld_mcst_frms);
3456         sp->stats.rx_length_errors =
3457                 le32_to_cpu(mac_control->stats_info->rmac_long_frms);
3458
3459         return (&sp->stats);
3460 }
3461
3462 /**
3463  *  s2io_set_multicast - entry point for multicast address enable/disable.
3464  *  @dev : pointer to the device structure
3465  *  Description:
3466  *  This function is a driver entry point which gets called by the kernel
3467  *  whenever multicast addresses must be enabled/disabled. This also gets
3468  *  called to set/reset promiscuous mode. Depending on the deivce flag, we
3469  *  determine, if multicast address must be enabled or if promiscuous mode
3470  *  is to be disabled etc.
3471  *  Return value:
3472  *  void.
3473  */
3474
3475 static void s2io_set_multicast(struct net_device *dev)
3476 {
3477         int i, j, prev_cnt;
3478         struct dev_mc_list *mclist;
3479         nic_t *sp = dev->priv;
3480         XENA_dev_config_t __iomem *bar0 = sp->bar0;
3481         u64 val64 = 0, multi_mac = 0x010203040506ULL, mask =
3482             0xfeffffffffffULL;
3483         u64 dis_addr = 0xffffffffffffULL, mac_addr = 0;
3484         void __iomem *add;
3485
3486         if ((dev->flags & IFF_ALLMULTI) && (!sp->m_cast_flg)) {
3487                 /*  Enable all Multicast addresses */
3488                 writeq(RMAC_ADDR_DATA0_MEM_ADDR(multi_mac),
3489                        &bar0->rmac_addr_data0_mem);
3490                 writeq(RMAC_ADDR_DATA1_MEM_MASK(mask),
3491                        &bar0->rmac_addr_data1_mem);
3492                 val64 = RMAC_ADDR_CMD_MEM_WE |
3493                     RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
3494                     RMAC_ADDR_CMD_MEM_OFFSET(MAC_MC_ALL_MC_ADDR_OFFSET);
3495                 writeq(val64, &bar0->rmac_addr_cmd_mem);
3496                 /* Wait till command completes */
3497                 wait_for_cmd_complete(sp);
3498
3499                 sp->m_cast_flg = 1;
3500                 sp->all_multi_pos = MAC_MC_ALL_MC_ADDR_OFFSET;
3501         } else if ((dev->flags & IFF_ALLMULTI) && (sp->m_cast_flg)) {
3502                 /*  Disable all Multicast addresses */
3503                 writeq(RMAC_ADDR_DATA0_MEM_ADDR(dis_addr),
3504                        &bar0->rmac_addr_data0_mem);
3505                 writeq(RMAC_ADDR_DATA1_MEM_MASK(0x0),
3506                        &bar0->rmac_addr_data1_mem);
3507                 val64 = RMAC_ADDR_CMD_MEM_WE |
3508                     RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
3509                     RMAC_ADDR_CMD_MEM_OFFSET(sp->all_multi_pos);
3510                 writeq(val64, &bar0->rmac_addr_cmd_mem);
3511                 /* Wait till command completes */
3512                 wait_for_cmd_complete(sp);
3513
3514                 sp->m_cast_flg = 0;
3515                 sp->all_multi_pos = 0;
3516         }
3517
3518         if ((dev->flags & IFF_PROMISC) && (!sp->promisc_flg)) {
3519                 /*  Put the NIC into promiscuous mode */
3520                 add = &bar0->mac_cfg;
3521                 val64 = readq(&bar0->mac_cfg);
3522                 val64 |= MAC_CFG_RMAC_PROM_ENABLE;
3523
3524                 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
3525                 writel((u32) val64, add);
3526                 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
3527                 writel((u32) (val64 >> 32), (add + 4));
3528
3529                 val64 = readq(&bar0->mac_cfg);
3530                 sp->promisc_flg = 1;
3531                 DBG_PRINT(ERR_DBG, "%s: entered promiscuous mode\n",
3532                           dev->name);
3533         } else if (!(dev->flags & IFF_PROMISC) && (sp->promisc_flg)) {
3534                 /*  Remove the NIC from promiscuous mode */
3535                 add = &bar0->mac_cfg;
3536                 val64 = readq(&bar0->mac_cfg);
3537                 val64 &= ~MAC_CFG_RMAC_PROM_ENABLE;
3538
3539                 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
3540                 writel((u32) val64, add);
3541                 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
3542                 writel((u32) (val64 >> 32), (add + 4));
3543
3544                 val64 = readq(&bar0->mac_cfg);
3545                 sp->promisc_flg = 0;
3546                 DBG_PRINT(ERR_DBG, "%s: left promiscuous mode\n",
3547                           dev->name);
3548         }
3549
3550         /*  Update individual M_CAST address list */
3551         if ((!sp->m_cast_flg) && dev->mc_count) {
3552                 if (dev->mc_count >
3553                     (MAX_ADDRS_SUPPORTED - MAC_MC_ADDR_START_OFFSET - 1)) {
3554                         DBG_PRINT(ERR_DBG, "%s: No more Rx filters ",
3555                                   dev->name);
3556                         DBG_PRINT(ERR_DBG, "can be added, please enable ");
3557                         DBG_PRINT(ERR_DBG, "ALL_MULTI instead\n");
3558                         return;
3559                 }
3560
3561                 prev_cnt = sp->mc_addr_count;
3562                 sp->mc_addr_count = dev->mc_count;
3563
3564                 /* Clear out the previous list of Mc in the H/W. */
3565                 for (i = 0; i < prev_cnt; i++) {
3566                         writeq(RMAC_ADDR_DATA0_MEM_ADDR(dis_addr),
3567                                &bar0->rmac_addr_data0_mem);
3568                         writeq(RMAC_ADDR_DATA1_MEM_MASK(0ULL),
3569                                 &bar0->rmac_addr_data1_mem);
3570                         val64 = RMAC_ADDR_CMD_MEM_WE |
3571                             RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
3572                             RMAC_ADDR_CMD_MEM_OFFSET
3573                             (MAC_MC_ADDR_START_OFFSET + i);
3574                         writeq(val64, &bar0->rmac_addr_cmd_mem);
3575
3576                         /* Wait for command completes */
3577                         if (wait_for_cmd_complete(sp)) {
3578                                 DBG_PRINT(ERR_DBG, "%s: Adding ",
3579                                           dev->name);
3580                                 DBG_PRINT(ERR_DBG, "Multicasts failed\n");
3581                                 return;
3582                         }
3583                 }
3584
3585                 /* Create the new Rx filter list and update the same in H/W. */
3586                 for (i = 0, mclist = dev->mc_list; i < dev->mc_count;
3587                      i++, mclist = mclist->next) {
3588                         memcpy(sp->usr_addrs[i].addr, mclist->dmi_addr,
3589                                ETH_ALEN);
3590                         for (j = 0; j < ETH_ALEN; j++) {
3591                                 mac_addr |= mclist->dmi_addr[j];
3592                                 mac_addr <<= 8;
3593                         }
3594                         mac_addr >>= 8;
3595                         writeq(RMAC_ADDR_DATA0_MEM_ADDR(mac_addr),
3596                                &bar0->rmac_addr_data0_mem);
3597                         writeq(RMAC_ADDR_DATA1_MEM_MASK(0ULL),
3598                                 &bar0->rmac_addr_data1_mem);
3599                         val64 = RMAC_ADDR_CMD_MEM_WE |
3600                             RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
3601                             RMAC_ADDR_CMD_MEM_OFFSET
3602                             (i + MAC_MC_ADDR_START_OFFSET);
3603                         writeq(val64, &bar0->rmac_addr_cmd_mem);
3604
3605                         /* Wait for command completes */
3606                         if (wait_for_cmd_complete(sp)) {
3607                                 DBG_PRINT(ERR_DBG, "%s: Adding ",
3608                                           dev->name);
3609                                 DBG_PRINT(ERR_DBG, "Multicasts failed\n");
3610                                 return;
3611                         }
3612                 }
3613         }
3614 }
3615
3616 /**
3617  *  s2io_set_mac_addr - Programs the Xframe mac address
3618  *  @dev : pointer to the device structure.
3619  *  @addr: a uchar pointer to the new mac address which is to be set.
3620  *  Description : This procedure will program the Xframe to receive
3621  *  frames with new Mac Address
3622  *  Return value: SUCCESS on success and an appropriate (-)ve integer
3623  *  as defined in errno.h file on failure.
3624  */
3625
3626 int s2io_set_mac_addr(struct net_device *dev, u8 * addr)
3627 {
3628         nic_t *sp = dev->priv;
3629         XENA_dev_config_t __iomem *bar0 = sp->bar0;
3630         register u64 val64, mac_addr = 0;
3631         int i;
3632
3633         /*
3634          * Set the new MAC address as the new unicast filter and reflect this
3635          * change on the device address registered with the OS. It will be
3636          * at offset 0.
3637          */
3638         for (i = 0; i < ETH_ALEN; i++) {
3639                 mac_addr <<= 8;
3640                 mac_addr |= addr[i];
3641         }
3642
3643         writeq(RMAC_ADDR_DATA0_MEM_ADDR(mac_addr),
3644                &bar0->rmac_addr_data0_mem);
3645
3646         val64 =
3647             RMAC_ADDR_CMD_MEM_WE | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
3648             RMAC_ADDR_CMD_MEM_OFFSET(0);
3649         writeq(val64, &bar0->rmac_addr_cmd_mem);
3650         /* Wait till command completes */
3651         if (wait_for_cmd_complete(sp)) {
3652                 DBG_PRINT(ERR_DBG, "%s: set_mac_addr failed\n", dev->name);
3653                 return FAILURE;
3654         }
3655
3656         return SUCCESS;
3657 }
3658
3659 /**
3660  * s2io_ethtool_sset - Sets different link parameters.
3661  * @sp : private member of the device structure, which is a pointer to the  * s2io_nic structure.
3662  * @info: pointer to the structure with parameters given by ethtool to set
3663  * link information.
3664  * Description:
3665  * The function sets different link parameters provided by the user onto
3666  * the NIC.
3667  * Return value:
3668  * 0 on success.
3669 */
3670
3671 static int s2io_ethtool_sset(struct net_device *dev,
3672                              struct ethtool_cmd *info)
3673 {
3674         nic_t *sp = dev->priv;
3675         if ((info->autoneg == AUTONEG_ENABLE) ||
3676             (info->speed != SPEED_10000) || (info->duplex != DUPLEX_FULL))
3677                 return -EINVAL;
3678         else {
3679                 s2io_close(sp->dev);
3680                 s2io_open(sp->dev);
3681         }
3682
3683         return 0;
3684 }
3685
3686 /**
3687  * s2io_ethtol_gset - Return link specific information.
3688  * @sp : private member of the device structure, pointer to the
3689  *      s2io_nic structure.
3690  * @info : pointer to the structure with parameters given by ethtool
3691  * to return link information.
3692  * Description:
3693  * Returns link specific information like speed, duplex etc.. to ethtool.
3694  * Return value :
3695  * return 0 on success.
3696  */
3697
3698 static int s2io_ethtool_gset(struct net_device *dev, struct ethtool_cmd *info)
3699 {
3700         nic_t *sp = dev->priv;
3701         info->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
3702         info->advertising = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
3703         info->port = PORT_FIBRE;
3704         /* info->transceiver?? TODO */
3705
3706         if (netif_carrier_ok(sp->dev)) {
3707                 info->speed = 10000;
3708                 info->duplex = DUPLEX_FULL;
3709         } else {
3710                 info->speed = -1;
3711                 info->duplex = -1;
3712         }
3713
3714         info->autoneg = AUTONEG_DISABLE;
3715         return 0;
3716 }
3717
3718 /**
3719  * s2io_ethtool_gdrvinfo - Returns driver specific information.
3720  * @sp : private member of the device structure, which is a pointer to the
3721  * s2io_nic structure.
3722  * @info : pointer to the structure with parameters given by ethtool to
3723  * return driver information.
3724  * Description:
3725  * Returns driver specefic information like name, version etc.. to ethtool.
3726  * Return value:
3727  *  void
3728  */
3729
3730 static void s2io_ethtool_gdrvinfo(struct net_device *dev,
3731                                   struct ethtool_drvinfo *info)
3732 {
3733         nic_t *sp = dev->priv;
3734
3735         strncpy(info->driver, s2io_driver_name, sizeof(s2io_driver_name));
3736         strncpy(info->version, s2io_driver_version,
3737                 sizeof(s2io_driver_version));
3738         strncpy(info->fw_version, "", 32);
3739         strncpy(info->bus_info, pci_name(sp->pdev), 32);
3740         info->regdump_len = XENA_REG_SPACE;
3741         info->eedump_len = XENA_EEPROM_SPACE;
3742         info->testinfo_len = S2IO_TEST_LEN;
3743         info->n_stats = S2IO_STAT_LEN;
3744 }
3745
3746 /**
3747  *  s2io_ethtool_gregs - dumps the entire space of Xfame into the buffer.
3748  *  @sp: private member of the device structure, which is a pointer to the
3749  *  s2io_nic structure.
3750  *  @regs : pointer to the structure with parameters given by ethtool for
3751  *  dumping the registers.
3752  *  @reg_space: The input argumnet into which all the registers are dumped.
3753  *  Description:
3754  *  Dumps the entire register space of xFrame NIC into the user given
3755  *  buffer area.
3756  * Return value :
3757  * void .
3758 */
3759
3760 static void s2io_ethtool_gregs(struct net_device *dev,
3761                                struct ethtool_regs *regs, void *space)
3762 {
3763         int i;
3764         u64 reg;
3765         u8 *reg_space = (u8 *) space;
3766         nic_t *sp = dev->priv;
3767
3768         regs->len = XENA_REG_SPACE;
3769         regs->version = sp->pdev->subsystem_device;
3770
3771         for (i = 0; i < regs->len; i += 8) {
3772                 reg = readq(sp->bar0 + i);
3773                 memcpy((reg_space + i), &reg, 8);
3774         }
3775 }
3776
3777 /**
3778  *  s2io_phy_id  - timer function that alternates adapter LED.
3779  *  @data : address of the private member of the device structure, which
3780  *  is a pointer to the s2io_nic structure, provided as an u32.
3781  * Description: This is actually the timer function that alternates the
3782  * adapter LED bit of the adapter control bit to set/reset every time on
3783  * invocation. The timer is set for 1/2 a second, hence tha NIC blinks
3784  *  once every second.
3785 */
3786 static void s2io_phy_id(unsigned long data)
3787 {
3788         nic_t *sp = (nic_t *) data;
3789         XENA_dev_config_t __iomem *bar0 = sp->bar0;
3790         u64 val64 = 0;
3791         u16 subid;
3792
3793         subid = sp->pdev->subsystem_device;
3794         if ((sp->device_type == XFRAME_II_DEVICE) ||
3795                    ((subid & 0xFF) >= 0x07)) {
3796                 val64 = readq(&bar0->gpio_control);
3797                 val64 ^= GPIO_CTRL_GPIO_0;
3798                 writeq(val64, &bar0->gpio_control);
3799         } else {
3800                 val64 = readq(&bar0->adapter_control);
3801                 val64 ^= ADAPTER_LED_ON;
3802                 writeq(val64, &bar0->adapter_control);
3803         }
3804
3805         mod_timer(&sp->id_timer, jiffies + HZ / 2);
3806 }
3807
3808 /**
3809  * s2io_ethtool_idnic - To physically identify the nic on the system.
3810  * @sp : private member of the device structure, which is a pointer to the
3811  * s2io_nic structure.
3812  * @id : pointer to the structure with identification parameters given by
3813  * ethtool.
3814  * Description: Used to physically identify the NIC on the system.
3815  * The Link LED will blink for a time specified by the user for
3816  * identification.
3817  * NOTE: The Link has to be Up to be able to blink the LED. Hence
3818  * identification is possible only if it's link is up.
3819  * Return value:
3820  * int , returns 0 on success
3821  */
3822
3823 static int s2io_ethtool_idnic(struct net_device *dev, u32 data)
3824 {
3825         u64 val64 = 0, last_gpio_ctrl_val;
3826         nic_t *sp = dev->priv;
3827         XENA_dev_config_t __iomem *bar0 = sp->bar0;
3828         u16 subid;
3829
3830         subid = sp->pdev->subsystem_device;
3831         last_gpio_ctrl_val = readq(&bar0->gpio_control);
3832         if ((sp->device_type == XFRAME_I_DEVICE) &&
3833                 ((subid & 0xFF) < 0x07)) {
3834                 val64 = readq(&bar0->adapter_control);
3835                 if (!(val64 & ADAPTER_CNTL_EN)) {
3836                         printk(KERN_ERR
3837                                "Adapter Link down, cannot blink LED\n");
3838                         return -EFAULT;
3839                 }
3840         }
3841         if (sp->id_timer.function == NULL) {
3842                 init_timer(&sp->id_timer);
3843                 sp->id_timer.function = s2io_phy_id;
3844                 sp->id_timer.data = (unsigned long) sp;
3845         }
3846         mod_timer(&sp->id_timer, jiffies);
3847         if (data)
3848                 msleep_interruptible(data * HZ);
3849         else
3850                 msleep_interruptible(MAX_FLICKER_TIME);
3851         del_timer_sync(&sp->id_timer);
3852
3853         if (CARDS_WITH_FAULTY_LINK_INDICATORS(sp->device_type, subid)) {
3854                 writeq(last_gpio_ctrl_val, &bar0->gpio_control);
3855                 last_gpio_ctrl_val = readq(&bar0->gpio_control);
3856         }
3857
3858         return 0;
3859 }
3860
3861 /**
3862  * s2io_ethtool_getpause_data -Pause frame frame generation and reception.
3863  * @sp : private member of the device structure, which is a pointer to the
3864  *      s2io_nic structure.
3865  * @ep : pointer to the structure with pause parameters given by ethtool.
3866  * Description:
3867  * Returns the Pause frame generation and reception capability of the NIC.
3868  * Return value:
3869  *  void
3870  */
3871 static void s2io_ethtool_getpause_data(struct net_device *dev,
3872                                        struct ethtool_pauseparam *ep)
3873 {
3874         u64 val64;
3875         nic_t *sp = dev->priv;
3876         XENA_dev_config_t __iomem *bar0 = sp->bar0;
3877
3878         val64 = readq(&bar0->rmac_pause_cfg);
3879         if (val64 & RMAC_PAUSE_GEN_ENABLE)
3880                 ep->tx_pause = TRUE;
3881         if (val64 & RMAC_PAUSE_RX_ENABLE)
3882                 ep->rx_pause = TRUE;
3883         ep->autoneg = FALSE;
3884 }
3885
3886 /**
3887  * s2io_ethtool_setpause_data -  set/reset pause frame generation.
3888  * @sp : private member of the device structure, which is a pointer to the
3889  *      s2io_nic structure.
3890  * @ep : pointer to the structure with pause parameters given by ethtool.
3891  * Description:
3892  * It can be used to set or reset Pause frame generation or reception
3893  * support of the NIC.
3894  * Return value:
3895  * int, returns 0 on Success
3896  */
3897
3898 static int s2io_ethtool_setpause_data(struct net_device *dev,
3899                                struct ethtool_pauseparam *ep)
3900 {
3901         u64 val64;
3902         nic_t *sp = dev->priv;
3903         XENA_dev_config_t __iomem *bar0 = sp->bar0;
3904
3905         val64 = readq(&bar0->rmac_pause_cfg);
3906         if (ep->tx_pause)
3907                 val64 |= RMAC_PAUSE_GEN_ENABLE;
3908         else
3909                 val64 &= ~RMAC_PAUSE_GEN_ENABLE;
3910         if (ep->rx_pause)
3911                 val64 |= RMAC_PAUSE_RX_ENABLE;
3912         else
3913                 val64 &= ~RMAC_PAUSE_RX_ENABLE;
3914         writeq(val64, &bar0->rmac_pause_cfg);
3915         return 0;
3916 }
3917
3918 /**
3919  * read_eeprom - reads 4 bytes of data from user given offset.
3920  * @sp : private member of the device structure, which is a pointer to the
3921  *      s2io_nic structure.
3922  * @off : offset at which the data must be written
3923  * @data : Its an output parameter where the data read at the given
3924  *      offset is stored.
3925  * Description:
3926  * Will read 4 bytes of data from the user given offset and return the
3927  * read data.
3928  * NOTE: Will allow to read only part of the EEPROM visible through the
3929  *   I2C bus.
3930  * Return value:
3931  *  -1 on failure and 0 on success.
3932  */
3933
3934 #define S2IO_DEV_ID             5
3935 static int read_eeprom(nic_t * sp, int off, u32 * data)
3936 {
3937         int ret = -1;
3938         u32 exit_cnt = 0;
3939         u64 val64;
3940         XENA_dev_config_t __iomem *bar0 = sp->bar0;
3941
3942         val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) | I2C_CONTROL_ADDR(off) |
3943             I2C_CONTROL_BYTE_CNT(0x3) | I2C_CONTROL_READ |
3944             I2C_CONTROL_CNTL_START;
3945         SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF);
3946
3947         while (exit_cnt < 5) {
3948                 val64 = readq(&bar0->i2c_control);
3949                 if (I2C_CONTROL_CNTL_END(val64)) {
3950                         *data = I2C_CONTROL_GET_DATA(val64);
3951                         ret = 0;
3952                         break;
3953                 }
3954                 msleep(50);
3955                 exit_cnt++;
3956         }
3957
3958         return ret;
3959 }
3960
3961 /**
3962  *  write_eeprom - actually writes the relevant part of the data value.
3963  *  @sp : private member of the device structure, which is a pointer to the
3964  *       s2io_nic structure.
3965  *  @off : offset at which the data must be written
3966  *  @data : The data that is to be written
3967  *  @cnt : Number of bytes of the data that are actually to be written into
3968  *  the Eeprom. (max of 3)
3969  * Description:
3970  *  Actually writes the relevant part of the data value into the Eeprom
3971  *  through the I2C bus.
3972  * Return value:
3973  *  0 on success, -1 on failure.
3974  */
3975
3976 static int write_eeprom(nic_t * sp, int off, u32 data, int cnt)
3977 {
3978         int exit_cnt = 0, ret = -1;
3979         u64 val64;
3980         XENA_dev_config_t __iomem *bar0 = sp->bar0;
3981
3982         val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) | I2C_CONTROL_ADDR(off) |
3983             I2C_CONTROL_BYTE_CNT(cnt) | I2C_CONTROL_SET_DATA(data) |
3984             I2C_CONTROL_CNTL_START;
3985         SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF);
3986
3987         while (exit_cnt < 5) {
3988                 val64 = readq(&bar0->i2c_control);
3989                 if (I2C_CONTROL_CNTL_END(val64)) {
3990                         if (!(val64 & I2C_CONTROL_NACK))
3991                                 ret = 0;
3992                         break;
3993                 }
3994                 msleep(50);
3995                 exit_cnt++;
3996         }
3997
3998         return ret;
3999 }
4000
4001 /**
4002  *  s2io_ethtool_geeprom  - reads the value stored in the Eeprom.
4003  *  @sp : private member of the device structure, which is a pointer to the *       s2io_nic structure.
4004  *  @eeprom : pointer to the user level structure provided by ethtool,
4005  *  containing all relevant information.
4006  *  @data_buf : user defined value to be written into Eeprom.
4007  *  Description: Reads the values stored in the Eeprom at given offset
4008  *  for a given length. Stores these values int the input argument data
4009  *  buffer 'data_buf' and returns these to the caller (ethtool.)
4010  *  Return value:
4011  *  int  0 on success
4012  */
4013
4014 static int s2io_ethtool_geeprom(struct net_device *dev,
4015                          struct ethtool_eeprom *eeprom, u8 * data_buf)
4016 {
4017         u32 data, i, valid;
4018         nic_t *sp = dev->priv;
4019
4020         eeprom->magic = sp->pdev->vendor | (sp->pdev->device << 16);
4021
4022         if ((eeprom->offset + eeprom->len) > (XENA_EEPROM_SPACE))
4023                 eeprom->len = XENA_EEPROM_SPACE - eeprom->offset;
4024
4025         for (i = 0; i < eeprom->len; i += 4) {
4026                 if (read_eeprom(sp, (eeprom->offset + i), &data)) {
4027                         DBG_PRINT(ERR_DBG, "Read of EEPROM failed\n");
4028                         return -EFAULT;
4029                 }
4030                 valid = INV(data);
4031                 memcpy((data_buf + i), &valid, 4);
4032         }
4033         return 0;
4034 }
4035
4036 /**
4037  *  s2io_ethtool_seeprom - tries to write the user provided value in Eeprom
4038  *  @sp : private member of the device structure, which is a pointer to the
4039  *  s2io_nic structure.
4040  *  @eeprom : pointer to the user level structure provided by ethtool,
4041  *  containing all relevant information.
4042  *  @data_buf ; user defined value to be written into Eeprom.
4043  *  Description:
4044  *  Tries to write the user provided value in the Eeprom, at the offset
4045  *  given by the user.
4046  *  Return value:
4047  *  0 on success, -EFAULT on failure.
4048  */
4049
4050 static int s2io_ethtool_seeprom(struct net_device *dev,
4051                                 struct ethtool_eeprom *eeprom,
4052                                 u8 * data_buf)
4053 {
4054         int len = eeprom->len, cnt = 0;
4055         u32 valid = 0, data;
4056         nic_t *sp = dev->priv;
4057
4058         if (eeprom->magic != (sp->pdev->vendor | (sp->pdev->device << 16))) {
4059                 DBG_PRINT(ERR_DBG,
4060                           "ETHTOOL_WRITE_EEPROM Err: Magic value ");
4061                 DBG_PRINT(ERR_DBG, "is wrong, Its not 0x%x\n",
4062                           eeprom->magic);
4063                 return -EFAULT;
4064         }
4065
4066         while (len) {
4067                 data = (u32) data_buf[cnt] & 0x000000FF;
4068                 if (data) {
4069                         valid = (u32) (data << 24);
4070                 } else
4071                         valid = data;
4072
4073                 if (write_eeprom(sp, (eeprom->offset + cnt), valid, 0)) {
4074                         DBG_PRINT(ERR_DBG,
4075                                   "ETHTOOL_WRITE_EEPROM Err: Cannot ");
4076                         DBG_PRINT(ERR_DBG,
4077                                   "write into the specified offset\n");
4078                         return -EFAULT;
4079                 }
4080                 cnt++;
4081                 len--;
4082         }
4083
4084         return 0;
4085 }
4086
4087 /**
4088  * s2io_register_test - reads and writes into all clock domains.
4089  * @sp : private member of the device structure, which is a pointer to the
4090  * s2io_nic structure.
4091  * @data : variable that returns the result of each of the test conducted b
4092  * by the driver.
4093  * Description:
4094  * Read and write into all clock domains. The NIC has 3 clock domains,
4095  * see that registers in all the three regions are accessible.
4096  * Return value:
4097  * 0 on success.
4098  */
4099
4100 static int s2io_register_test(nic_t * sp, uint64_t * data)
4101 {
4102         XENA_dev_config_t __iomem *bar0 = sp->bar0;
4103         u64 val64 = 0;
4104         int fail = 0;
4105
4106         val64 = readq(&bar0->pif_rd_swapper_fb);
4107         if (val64 != 0x123456789abcdefULL) {
4108                 fail = 1;
4109                 DBG_PRINT(INFO_DBG, "Read Test level 1 fails\n");
4110         }
4111
4112         val64 = readq(&bar0->rmac_pause_cfg);
4113         if (val64 != 0xc000ffff00000000ULL) {
4114                 fail = 1;
4115                 DBG_PRINT(INFO_DBG, "Read Test level 2 fails\n");
4116         }
4117
4118         val64 = readq(&bar0->rx_queue_cfg);
4119         if (val64 != 0x0808080808080808ULL) {
4120                 fail = 1;
4121                 DBG_PRINT(INFO_DBG, "Read Test level 3 fails\n");
4122         }
4123
4124         val64 = readq(&bar0->xgxs_efifo_cfg);
4125         if (val64 != 0x000000001923141EULL) {
4126                 fail = 1;
4127                 DBG_PRINT(INFO_DBG, "Read Test level 4 fails\n");
4128         }
4129
4130         val64 = 0x5A5A5A5A5A5A5A5AULL;
4131         writeq(val64, &bar0->xmsi_data);
4132         val64 = readq(&bar0->xmsi_data);
4133         if (val64 != 0x5A5A5A5A5A5A5A5AULL) {
4134                 fail = 1;
4135                 DBG_PRINT(ERR_DBG, "Write Test level 1 fails\n");
4136         }
4137
4138         val64 = 0xA5A5A5A5A5A5A5A5ULL;
4139         writeq(val64, &bar0->xmsi_data);
4140         val64 = readq(&bar0->xmsi_data);
4141         if (val64 != 0xA5A5A5A5A5A5A5A5ULL) {
4142                 fail = 1;
4143                 DBG_PRINT(ERR_DBG, "Write Test level 2 fails\n");
4144         }
4145
4146         *data = fail;
4147         return 0;
4148 }
4149
4150 /**
4151  * s2io_eeprom_test - to verify that EEprom in the xena can be programmed.
4152  * @sp : private member of the device structure, which is a pointer to the
4153  * s2io_nic structure.
4154  * @data:variable that returns the result of each of the test conducted by
4155  * the driver.
4156  * Description:
4157  * Verify that EEPROM in the xena can be programmed using I2C_CONTROL
4158  * register.
4159  * Return value:
4160  * 0 on success.
4161  */
4162
4163 static int s2io_eeprom_test(nic_t * sp, uint64_t * data)
4164 {
4165         int fail = 0;
4166         u32 ret_data;
4167
4168         /* Test Write Error at offset 0 */
4169         if (!write_eeprom(sp, 0, 0, 3))
4170                 fail = 1;
4171
4172         /* Test Write at offset 4f0 */
4173         if (write_eeprom(sp, 0x4F0, 0x01234567, 3))
4174                 fail = 1;
4175         if (read_eeprom(sp, 0x4F0, &ret_data))
4176                 fail = 1;
4177
4178         if (ret_data != 0x01234567)
4179                 fail = 1;
4180
4181         /* Reset the EEPROM data go FFFF */
4182         write_eeprom(sp, 0x4F0, 0xFFFFFFFF, 3);
4183
4184         /* Test Write Request Error at offset 0x7c */
4185         if (!write_eeprom(sp, 0x07C, 0, 3))
4186                 fail = 1;
4187
4188         /* Test Write Request at offset 0x7fc */
4189         if (write_eeprom(sp, 0x7FC, 0x01234567, 3))
4190                 fail = 1;
4191         if (read_eeprom(sp, 0x7FC, &ret_data))
4192                 fail = 1;
4193
4194         if (ret_data != 0x01234567)
4195                 fail = 1;
4196
4197         /* Reset the EEPROM data go FFFF */
4198         write_eeprom(sp, 0x7FC, 0xFFFFFFFF, 3);
4199
4200         /* Test Write Error at offset 0x80 */
4201         if (!write_eeprom(sp, 0x080, 0, 3))
4202                 fail = 1;
4203
4204         /* Test Write Error at offset 0xfc */
4205         if (!write_eeprom(sp, 0x0FC, 0, 3))
4206                 fail = 1;
4207
4208         /* Test Write Error at offset 0x100 */
4209         if (!write_eeprom(sp, 0x100, 0, 3))
4210                 fail = 1;
4211
4212         /* Test Write Error at offset 4ec */
4213         if (!write_eeprom(sp, 0x4EC, 0, 3))
4214                 fail = 1;
4215
4216         *data = fail;
4217         return 0;
4218 }
4219
4220 /**
4221  * s2io_bist_test - invokes the MemBist test of the card .
4222  * @sp : private member of the device structure, which is a pointer to the
4223  * s2io_nic structure.
4224  * @data:variable that returns the result of each of the test conducted by
4225  * the driver.
4226  * Description:
4227  * This invokes the MemBist test of the card. We give around
4228  * 2 secs time for the Test to complete. If it's still not complete
4229  * within this peiod, we consider that the test failed.
4230  * Return value:
4231  * 0 on success and -1 on failure.
4232  */
4233
4234 static int s2io_bist_test(nic_t * sp, uint64_t * data)
4235 {
4236         u8 bist = 0;
4237         int cnt = 0, ret = -1;
4238
4239         pci_read_config_byte(sp->pdev, PCI_BIST, &bist);
4240         bist |= PCI_BIST_START;
4241         pci_write_config_word(sp->pdev, PCI_BIST, bist);
4242
4243         while (cnt < 20) {
4244                 pci_read_config_byte(sp->pdev, PCI_BIST, &bist);
4245                 if (!(bist & PCI_BIST_START)) {
4246                         *data = (bist & PCI_BIST_CODE_MASK);
4247                         ret = 0;
4248                         break;
4249                 }
4250                 msleep(100);
4251                 cnt++;
4252         }
4253
4254         return ret;
4255 }
4256
4257 /**
4258  * s2io-link_test - verifies the link state of the nic
4259  * @sp ; private member of the device structure, which is a pointer to the
4260  * s2io_nic structure.
4261  * @data: variable that returns the result of each of the test conducted by
4262  * the driver.
4263  * Description:
4264  * The function verifies the link state of the NIC and updates the input
4265  * argument 'data' appropriately.
4266  * Return value:
4267  * 0 on success.
4268  */
4269
4270 static int s2io_link_test(nic_t * sp, uint64_t * data)
4271 {
4272         XENA_dev_config_t __iomem *bar0 = sp->bar0;
4273         u64 val64;
4274
4275         val64 = readq(&bar0->adapter_status);
4276         if (val64 & ADAPTER_STATUS_RMAC_LOCAL_FAULT)
4277                 *data = 1;
4278
4279         return 0;
4280 }
4281
4282 /**
4283  * s2io_rldram_test - offline test for access to the RldRam chip on the NIC
4284  * @sp - private member of the device structure, which is a pointer to the
4285  * s2io_nic structure.
4286  * @data - variable that returns the result of each of the test
4287  * conducted by the driver.
4288  * Description:
4289  *  This is one of the offline test that tests the read and write
4290  *  access to the RldRam chip on the NIC.
4291  * Return value:
4292  *  0 on success.
4293  */
4294
4295 static int s2io_rldram_test(nic_t * sp, uint64_t * data)
4296 {
4297         XENA_dev_config_t __iomem *bar0 = sp->bar0;
4298         u64 val64;
4299         int cnt, iteration = 0, test_pass = 0;
4300
4301         val64 = readq(&bar0->adapter_control);
4302         val64 &= ~ADAPTER_ECC_EN;
4303         writeq(val64, &bar0->adapter_control);
4304
4305         val64 = readq(&bar0->mc_rldram_test_ctrl);
4306         val64 |= MC_RLDRAM_TEST_MODE;
4307         writeq(val64, &bar0->mc_rldram_test_ctrl);
4308
4309         val64 = readq(&bar0->mc_rldram_mrs);
4310         val64 |= MC_RLDRAM_QUEUE_SIZE_ENABLE;
4311         SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_mrs, UF);
4312
4313         val64 |= MC_RLDRAM_MRS_ENABLE;
4314         SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_mrs, UF);
4315
4316         while (iteration < 2) {
4317                 val64 = 0x55555555aaaa0000ULL;
4318                 if (iteration == 1) {
4319                         val64 ^= 0xFFFFFFFFFFFF0000ULL;
4320                 }
4321                 writeq(val64, &bar0->mc_rldram_test_d0);
4322
4323                 val64 = 0xaaaa5a5555550000ULL;
4324                 if (iteration == 1) {
4325                         val64 ^= 0xFFFFFFFFFFFF0000ULL;
4326                 }
4327                 writeq(val64, &bar0->mc_rldram_test_d1);
4328
4329                 val64 = 0x55aaaaaaaa5a0000ULL;
4330                 if (iteration == 1) {
4331                         val64 ^= 0xFFFFFFFFFFFF0000ULL;
4332                 }
4333                 writeq(val64, &bar0->mc_rldram_test_d2);
4334
4335                 val64 = (u64) (0x0000003fffff0000ULL);
4336                 writeq(val64, &bar0->mc_rldram_test_add);
4337
4338
4339                 val64 = MC_RLDRAM_TEST_MODE;
4340                 writeq(val64, &bar0->mc_rldram_test_ctrl);
4341
4342                 val64 |=
4343                     MC_RLDRAM_TEST_MODE | MC_RLDRAM_TEST_WRITE |
4344                     MC_RLDRAM_TEST_GO;
4345                 writeq(val64, &bar0->mc_rldram_test_ctrl);
4346
4347                 for (cnt = 0; cnt < 5; cnt++) {
4348                         val64 = readq(&bar0->mc_rldram_test_ctrl);
4349                         if (val64 & MC_RLDRAM_TEST_DONE)
4350                                 break;
4351                         msleep(200);
4352                 }
4353
4354                 if (cnt == 5)
4355                         break;
4356
4357                 val64 = MC_RLDRAM_TEST_MODE;
4358                 writeq(val64, &bar0->mc_rldram_test_ctrl);
4359
4360                 val64 |= MC_RLDRAM_TEST_MODE | MC_RLDRAM_TEST_GO;
4361                 writeq(val64, &bar0->mc_rldram_test_ctrl);
4362
4363                 for (cnt = 0; cnt < 5; cnt++) {
4364                         val64 = readq(&bar0->mc_rldram_test_ctrl);
4365                         if (val64 & MC_RLDRAM_TEST_DONE)
4366                                 break;
4367                         msleep(500);
4368                 }
4369
4370                 if (cnt == 5)
4371                         break;
4372
4373                 val64 = readq(&bar0->mc_rldram_test_ctrl);
4374                 if (val64 & MC_RLDRAM_TEST_PASS)
4375                         test_pass = 1;
4376
4377                 iteration++;
4378         }
4379
4380         if (!test_pass)
4381                 *data = 1;
4382         else
4383                 *data = 0;
4384
4385         return 0;
4386 }
4387
4388 /**
4389  *  s2io_ethtool_test - conducts 6 tsets to determine the health of card.
4390  *  @sp : private member of the device structure, which is a pointer to the
4391  *  s2io_nic structure.
4392  *  @ethtest : pointer to a ethtool command specific structure that will be
4393  *  returned to the user.
4394  *  @data : variable that returns the result of each of the test
4395  * conducted by the driver.
4396  * Description:
4397  *  This function conducts 6 tests ( 4 offline and 2 online) to determine
4398  *  the health of the card.
4399  * Return value:
4400  *  void
4401  */
4402
4403 static void s2io_ethtool_test(struct net_device *dev,
4404                               struct ethtool_test *ethtest,
4405                               uint64_t * data)
4406 {
4407         nic_t *sp = dev->priv;
4408         int orig_state = netif_running(sp->dev);
4409
4410         if (ethtest->flags == ETH_TEST_FL_OFFLINE) {
4411                 /* Offline Tests. */
4412                 if (orig_state)
4413                         s2io_close(sp->dev);
4414
4415                 if (s2io_register_test(sp, &data[0]))
4416                         ethtest->flags |= ETH_TEST_FL_FAILED;
4417
4418                 s2io_reset(sp);
4419
4420                 if (s2io_rldram_test(sp, &data[3]))
4421                         ethtest->flags |= ETH_TEST_FL_FAILED;
4422
4423                 s2io_reset(sp);
4424
4425                 if (s2io_eeprom_test(sp, &data[1]))
4426                         ethtest->flags |= ETH_TEST_FL_FAILED;
4427
4428                 if (s2io_bist_test(sp, &data[4]))
4429                         ethtest->flags |= ETH_TEST_FL_FAILED;
4430
4431                 if (orig_state)
4432                         s2io_open(sp->dev);
4433
4434                 data[2] = 0;
4435         } else {
4436                 /* Online Tests. */
4437                 if (!orig_state) {
4438                         DBG_PRINT(ERR_DBG,
4439                                   "%s: is not up, cannot run test\n",
4440                                   dev->name);
4441                         data[0] = -1;
4442                         data[1] = -1;
4443                         data[2] = -1;
4444                         data[3] = -1;
4445                         data[4] = -1;
4446                 }
4447
4448                 if (s2io_link_test(sp, &data[2]))
4449                         ethtest->flags |= ETH_TEST_FL_FAILED;
4450
4451                 data[0] = 0;
4452                 data[1] = 0;
4453                 data[3] = 0;
4454                 data[4] = 0;
4455         }
4456 }
4457
4458 static void s2io_get_ethtool_stats(struct net_device *dev,
4459                                    struct ethtool_stats *estats,
4460                                    u64 * tmp_stats)
4461 {
4462         int i = 0;
4463         nic_t *sp = dev->priv;
4464         StatInfo_t *stat_info = sp->mac_control.stats_info;
4465
4466         s2io_updt_stats(sp);
4467         tmp_stats[i++] =
4468                 (u64)le32_to_cpu(stat_info->tmac_frms_oflow) << 32  |
4469                 le32_to_cpu(stat_info->tmac_frms);
4470         tmp_stats[i++] =
4471                 (u64)le32_to_cpu(stat_info->tmac_data_octets_oflow) << 32 |
4472                 le32_to_cpu(stat_info->tmac_data_octets);
4473         tmp_stats[i++] = le64_to_cpu(stat_info->tmac_drop_frms);
4474         tmp_stats[i++] =
4475                 (u64)le32_to_cpu(stat_info->tmac_mcst_frms_oflow) << 32 |
4476                 le32_to_cpu(stat_info->tmac_mcst_frms);
4477         tmp_stats[i++] =
4478                 (u64)le32_to_cpu(stat_info->tmac_bcst_frms_oflow) << 32 |
4479                 le32_to_cpu(stat_info->tmac_bcst_frms);
4480         tmp_stats[i++] = le64_to_cpu(stat_info->tmac_pause_ctrl_frms);
4481         tmp_stats[i++] =
4482                 (u64)le32_to_cpu(stat_info->tmac_any_err_frms_oflow) << 32 |
4483                 le32_to_cpu(stat_info->tmac_any_err_frms);
4484         tmp_stats[i++] = le64_to_cpu(stat_info->tmac_vld_ip_octets);
4485         tmp_stats[i++] =
4486                 (u64)le32_to_cpu(stat_info->tmac_vld_ip_oflow) << 32 |
4487                 le32_to_cpu(stat_info->tmac_vld_ip);
4488         tmp_stats[i++] =
4489                 (u64)le32_to_cpu(stat_info->tmac_drop_ip_oflow) << 32 |
4490                 le32_to_cpu(stat_info->tmac_drop_ip);
4491         tmp_stats[i++] =
4492                 (u64)le32_to_cpu(stat_info->tmac_icmp_oflow) << 32 |
4493                 le32_to_cpu(stat_info->tmac_icmp);
4494         tmp_stats[i++] =
4495                 (u64)le32_to_cpu(stat_info->tmac_rst_tcp_oflow) << 32 |
4496                 le32_to_cpu(stat_info->tmac_rst_tcp);
4497         tmp_stats[i++] = le64_to_cpu(stat_info->tmac_tcp);
4498         tmp_stats[i++] = (u64)le32_to_cpu(stat_info->tmac_udp_oflow) << 32 |
4499                 le32_to_cpu(stat_info->tmac_udp);
4500         tmp_stats[i++] =
4501                 (u64)le32_to_cpu(stat_info->rmac_vld_frms_oflow) << 32 |
4502                 le32_to_cpu(stat_info->rmac_vld_frms);
4503         tmp_stats[i++] =
4504                 (u64)le32_to_cpu(stat_info->rmac_data_octets_oflow) << 32 |
4505                 le32_to_cpu(stat_info->rmac_data_octets);
4506         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_fcs_err_frms);
4507         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_drop_frms);
4508         tmp_stats[i++] =
4509                 (u64)le32_to_cpu(stat_info->rmac_vld_mcst_frms_oflow) << 32 |
4510                 le32_to_cpu(stat_info->rmac_vld_mcst_frms);
4511         tmp_stats[i++] =
4512                 (u64)le32_to_cpu(stat_info->rmac_vld_bcst_frms_oflow) << 32 |
4513                 le32_to_cpu(stat_info->rmac_vld_bcst_frms);
4514         tmp_stats[i++] = le32_to_cpu(stat_info->rmac_in_rng_len_err_frms);
4515         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_long_frms);
4516         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_pause_ctrl_frms);
4517         tmp_stats[i++] =
4518                 (u64)le32_to_cpu(stat_info->rmac_discarded_frms_oflow) << 32 |
4519                 le32_to_cpu(stat_info->rmac_discarded_frms);
4520         tmp_stats[i++] =
4521                 (u64)le32_to_cpu(stat_info->rmac_usized_frms_oflow) << 32 |
4522                 le32_to_cpu(stat_info->rmac_usized_frms);
4523         tmp_stats[i++] =
4524                 (u64)le32_to_cpu(stat_info->rmac_osized_frms_oflow) << 32 |
4525                 le32_to_cpu(stat_info->rmac_osized_frms);
4526         tmp_stats[i++] =
4527                 (u64)le32_to_cpu(stat_info->rmac_frag_frms_oflow) << 32 |
4528                 le32_to_cpu(stat_info->rmac_frag_frms);
4529         tmp_stats[i++] =
4530                 (u64)le32_to_cpu(stat_info->rmac_jabber_frms_oflow) << 32 |
4531                 le32_to_cpu(stat_info->rmac_jabber_frms);
4532         tmp_stats[i++] = (u64)le32_to_cpu(stat_info->rmac_ip_oflow) << 32 |
4533                 le32_to_cpu(stat_info->rmac_ip);
4534         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ip_octets);
4535         tmp_stats[i++] = le32_to_cpu(stat_info->rmac_hdr_err_ip);
4536         tmp_stats[i++] = (u64)le32_to_cpu(stat_info->rmac_drop_ip_oflow) << 32 |
4537                 le32_to_cpu(stat_info->rmac_drop_ip);
4538         tmp_stats[i++] = (u64)le32_to_cpu(stat_info->rmac_icmp_oflow) << 32 |
4539                 le32_to_cpu(stat_info->rmac_icmp);
4540         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_tcp);
4541         tmp_stats[i++] = (u64)le32_to_cpu(stat_info->rmac_udp_oflow) << 32 |
4542                 le32_to_cpu(stat_info->rmac_udp);
4543         tmp_stats[i++] =
4544                 (u64)le32_to_cpu(stat_info->rmac_err_drp_udp_oflow) << 32 |
4545                 le32_to_cpu(stat_info->rmac_err_drp_udp);
4546         tmp_stats[i++] =
4547                 (u64)le32_to_cpu(stat_info->rmac_pause_cnt_oflow) << 32 |
4548                 le32_to_cpu(stat_info->rmac_pause_cnt);
4549         tmp_stats[i++] =
4550                 (u64)le32_to_cpu(stat_info->rmac_accepted_ip_oflow) << 32 |
4551                 le32_to_cpu(stat_info->rmac_accepted_ip);
4552         tmp_stats[i++] = le32_to_cpu(stat_info->rmac_err_tcp);
4553         tmp_stats[i++] = 0;
4554         tmp_stats[i++] = stat_info->sw_stat.single_ecc_errs;
4555         tmp_stats[i++] = stat_info->sw_stat.double_ecc_errs;
4556 }
4557
4558 int s2io_ethtool_get_regs_len(struct net_device *dev)
4559 {
4560         return (XENA_REG_SPACE);
4561 }
4562
4563
4564 u32 s2io_ethtool_get_rx_csum(struct net_device * dev)
4565 {
4566         nic_t *sp = dev->priv;
4567
4568         return (sp->rx_csum);
4569 }
4570 int s2io_ethtool_set_rx_csum(struct net_device *dev, u32 data)
4571 {
4572         nic_t *sp = dev->priv;
4573
4574         if (data)
4575                 sp->rx_csum = 1;
4576         else
4577                 sp->rx_csum = 0;
4578
4579         return 0;
4580 }
4581 int s2io_get_eeprom_len(struct net_device *dev)
4582 {
4583         return (XENA_EEPROM_SPACE);
4584 }
4585
4586 int s2io_ethtool_self_test_count(struct net_device *dev)
4587 {
4588         return (S2IO_TEST_LEN);
4589 }
4590 void s2io_ethtool_get_strings(struct net_device *dev,
4591                               u32 stringset, u8 * data)
4592 {
4593         switch (stringset) {
4594         case ETH_SS_TEST:
4595                 memcpy(data, s2io_gstrings, S2IO_STRINGS_LEN);
4596                 break;
4597         case ETH_SS_STATS:
4598                 memcpy(data, &ethtool_stats_keys,
4599                        sizeof(ethtool_stats_keys));
4600         }
4601 }
4602 static int s2io_ethtool_get_stats_count(struct net_device *dev)
4603 {
4604         return (S2IO_STAT_LEN);
4605 }
4606
4607 int s2io_ethtool_op_set_tx_csum(struct net_device *dev, u32 data)
4608 {
4609         if (data)
4610                 dev->features |= NETIF_F_IP_CSUM;
4611         else
4612                 dev->features &= ~NETIF_F_IP_CSUM;
4613
4614         return 0;
4615 }
4616
4617
4618 static struct ethtool_ops netdev_ethtool_ops = {
4619         .get_settings = s2io_ethtool_gset,
4620         .set_settings = s2io_ethtool_sset,
4621         .get_drvinfo = s2io_ethtool_gdrvinfo,
4622         .get_regs_len = s2io_ethtool_get_regs_len,
4623         .get_regs = s2io_ethtool_gregs,
4624         .get_link = ethtool_op_get_link,
4625         .get_eeprom_len = s2io_get_eeprom_len,
4626         .get_eeprom = s2io_ethtool_geeprom,
4627         .set_eeprom = s2io_ethtool_seeprom,
4628         .get_pauseparam = s2io_ethtool_getpause_data,
4629         .set_pauseparam = s2io_ethtool_setpause_data,
4630         .get_rx_csum = s2io_ethtool_get_rx_csum,
4631         .set_rx_csum = s2io_ethtool_set_rx_csum,
4632         .get_tx_csum = ethtool_op_get_tx_csum,
4633         .set_tx_csum = s2io_ethtool_op_set_tx_csum,
4634         .get_sg = ethtool_op_get_sg,
4635         .set_sg = ethtool_op_set_sg,
4636 #ifdef NETIF_F_TSO
4637         .get_tso = ethtool_op_get_tso,
4638         .set_tso = ethtool_op_set_tso,
4639 #endif
4640         .self_test_count = s2io_ethtool_self_test_count,
4641         .self_test = s2io_ethtool_test,
4642         .get_strings = s2io_ethtool_get_strings,
4643         .phys_id = s2io_ethtool_idnic,
4644         .get_stats_count = s2io_ethtool_get_stats_count,
4645         .get_ethtool_stats = s2io_get_ethtool_stats
4646 };
4647
4648 /**
4649  *  s2io_ioctl - Entry point for the Ioctl
4650  *  @dev :  Device pointer.
4651  *  @ifr :  An IOCTL specefic structure, that can contain a pointer to
4652  *  a proprietary structure used to pass information to the driver.
4653  *  @cmd :  This is used to distinguish between the different commands that
4654  *  can be passed to the IOCTL functions.
4655  *  Description:
4656  *  Currently there are no special functionality supported in IOCTL, hence
4657  *  function always return EOPNOTSUPPORTED
4658  */
4659
4660 int s2io_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
4661 {
4662         return -EOPNOTSUPP;
4663 }
4664
4665 /**
4666  *  s2io_change_mtu - entry point to change MTU size for the device.
4667  *   @dev : device pointer.
4668  *   @new_mtu : the new MTU size for the device.
4669  *   Description: A driver entry point to change MTU size for the device.
4670  *   Before changing the MTU the device must be stopped.
4671  *  Return value:
4672  *   0 on success and an appropriate (-)ve integer as defined in errno.h
4673  *   file on failure.
4674  */
4675
4676 int s2io_change_mtu(struct net_device *dev, int new_mtu)
4677 {
4678         nic_t *sp = dev->priv;
4679
4680         if ((new_mtu < MIN_MTU) || (new_mtu > S2IO_JUMBO_SIZE)) {
4681                 DBG_PRINT(ERR_DBG, "%s: MTU size is invalid.\n",
4682                           dev->name);
4683                 return -EPERM;
4684         }
4685
4686         dev->mtu = new_mtu;
4687         if (netif_running(dev)) {
4688                 s2io_card_down(sp);
4689                 netif_stop_queue(dev);
4690                 if (s2io_card_up(sp)) {
4691                         DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n",
4692                                   __FUNCTION__);
4693                 }
4694                 if (netif_queue_stopped(dev))
4695                         netif_wake_queue(dev);
4696         } else { /* Device is down */
4697                 XENA_dev_config_t __iomem *bar0 = sp->bar0;
4698                 u64 val64 = new_mtu;
4699
4700                 writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len);
4701         }
4702
4703         return 0;
4704 }
4705
4706 /**
4707  *  s2io_tasklet - Bottom half of the ISR.
4708  *  @dev_adr : address of the device structure in dma_addr_t format.
4709  *  Description:
4710  *  This is the tasklet or the bottom half of the ISR. This is
4711  *  an extension of the ISR which is scheduled by the scheduler to be run
4712  *  when the load on the CPU is low. All low priority tasks of the ISR can
4713  *  be pushed into the tasklet. For now the tasklet is used only to
4714  *  replenish the Rx buffers in the Rx buffer descriptors.
4715  *  Return value:
4716  *  void.
4717  */
4718
4719 static void s2io_tasklet(unsigned long dev_addr)
4720 {
4721         struct net_device *dev = (struct net_device *) dev_addr;
4722         nic_t *sp = dev->priv;
4723         int i, ret;
4724         mac_info_t *mac_control;
4725         struct config_param *config;
4726
4727         mac_control = &sp->mac_control;
4728         config = &sp->config;
4729
4730         if (!TASKLET_IN_USE) {
4731                 for (i = 0; i < config->rx_ring_num; i++) {
4732                         ret = fill_rx_buffers(sp, i);
4733                         if (ret == -ENOMEM) {
4734                                 DBG_PRINT(ERR_DBG, "%s: Out of ",
4735                                           dev->name);
4736                                 DBG_PRINT(ERR_DBG, "memory in tasklet\n");
4737                                 break;
4738                         } else if (ret == -EFILL) {
4739                                 DBG_PRINT(ERR_DBG,
4740                                           "%s: Rx Ring %d is full\n",
4741                                           dev->name, i);
4742                                 break;
4743                         }
4744                 }
4745                 clear_bit(0, (&sp->tasklet_status));
4746         }
4747 }
4748
4749 /**
4750  * s2io_set_link - Set the LInk status
4751  * @data: long pointer to device private structue
4752  * Description: Sets the link status for the adapter
4753  */
4754
4755 static void s2io_set_link(unsigned long data)
4756 {
4757         nic_t *nic = (nic_t *) data;
4758         struct net_device *dev = nic->dev;
4759         XENA_dev_config_t __iomem *bar0 = nic->bar0;
4760         register u64 val64;
4761         u16 subid;
4762
4763         if (test_and_set_bit(0, &(nic->link_state))) {
4764                 /* The card is being reset, no point doing anything */
4765                 return;
4766         }
4767
4768         subid = nic->pdev->subsystem_device;
4769         if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER) {
4770                 /*
4771                  * Allow a small delay for the NICs self initiated
4772                  * cleanup to complete.
4773                  */
4774                 msleep(100);
4775         }
4776
4777         val64 = readq(&bar0->adapter_status);
4778         if (verify_xena_quiescence(nic, val64, nic->device_enabled_once)) {
4779                 if (LINK_IS_UP(val64)) {
4780                         val64 = readq(&bar0->adapter_control);
4781                         val64 |= ADAPTER_CNTL_EN;
4782                         writeq(val64, &bar0->adapter_control);
4783                         if (CARDS_WITH_FAULTY_LINK_INDICATORS(nic->device_type,
4784                                                              subid)) {
4785                                 val64 = readq(&bar0->gpio_control);
4786                                 val64 |= GPIO_CTRL_GPIO_0;
4787                                 writeq(val64, &bar0->gpio_control);
4788                                 val64 = readq(&bar0->gpio_control);
4789                         } else {
4790                                 val64 |= ADAPTER_LED_ON;
4791                                 writeq(val64, &bar0->adapter_control);
4792                         }
4793                         if (s2io_link_fault_indication(nic) ==
4794                                                 MAC_RMAC_ERR_TIMER) {
4795                                 val64 = readq(&bar0->adapter_status);
4796                                 if (!LINK_IS_UP(val64)) {
4797                                         DBG_PRINT(ERR_DBG, "%s:", dev->name);
4798                                         DBG_PRINT(ERR_DBG, " Link down");
4799                                         DBG_PRINT(ERR_DBG, "after ");
4800                                         DBG_PRINT(ERR_DBG, "enabling ");
4801                                         DBG_PRINT(ERR_DBG, "device \n");
4802                                 }
4803                         }
4804                         if (nic->device_enabled_once == FALSE) {
4805                                 nic->device_enabled_once = TRUE;
4806                         }
4807                         s2io_link(nic, LINK_UP);
4808                 } else {
4809                         if (CARDS_WITH_FAULTY_LINK_INDICATORS(nic->device_type,
4810                                                               subid)) {
4811                                 val64 = readq(&bar0->gpio_control);
4812                                 val64 &= ~GPIO_CTRL_GPIO_0;
4813                                 writeq(val64, &bar0->gpio_control);
4814                                 val64 = readq(&bar0->gpio_control);
4815                         }
4816                         s2io_link(nic, LINK_DOWN);
4817                 }
4818         } else {                /* NIC is not Quiescent. */
4819                 DBG_PRINT(ERR_DBG, "%s: Error: ", dev->name);
4820                 DBG_PRINT(ERR_DBG, "device is not Quiescent\n");
4821                 netif_stop_queue(dev);
4822         }
4823         clear_bit(0, &(nic->link_state));
4824 }
4825
4826 static void s2io_card_down(nic_t * sp)
4827 {
4828         int cnt = 0;
4829         XENA_dev_config_t __iomem *bar0 = sp->bar0;
4830         unsigned long flags;
4831         register u64 val64 = 0;
4832
4833         del_timer_sync(&sp->alarm_timer);
4834         /* If s2io_set_link task is executing, wait till it completes. */
4835         while (test_and_set_bit(0, &(sp->link_state))) {
4836                 msleep(50);
4837         }
4838         atomic_set(&sp->card_state, CARD_DOWN);
4839
4840         /* disable Tx and Rx traffic on the NIC */
4841         stop_nic(sp);
4842
4843         /* Kill tasklet. */
4844         tasklet_kill(&sp->task);
4845
4846         /* Check if the device is Quiescent and then Reset the NIC */
4847         do {
4848                 val64 = readq(&bar0->adapter_status);
4849                 if (verify_xena_quiescence(sp, val64, sp->device_enabled_once)) {
4850                         break;
4851                 }
4852
4853                 msleep(50);
4854                 cnt++;
4855                 if (cnt == 10) {
4856                         DBG_PRINT(ERR_DBG,
4857                                   "s2io_close:Device not Quiescent ");
4858                         DBG_PRINT(ERR_DBG, "adaper status reads 0x%llx\n",
4859                                   (unsigned long long) val64);
4860                         break;
4861                 }
4862         } while (1);
4863         s2io_reset(sp);
4864
4865         /* Waiting till all Interrupt handlers are complete */
4866         cnt = 0;
4867         do {
4868                 msleep(10);
4869                 if (!atomic_read(&sp->isr_cnt))
4870                         break;
4871                 cnt++;
4872         } while(cnt < 5);
4873
4874         spin_lock_irqsave(&sp->tx_lock, flags);
4875         /* Free all Tx buffers */
4876         free_tx_buffers(sp);
4877         spin_unlock_irqrestore(&sp->tx_lock, flags);
4878
4879         /* Free all Rx buffers */
4880         spin_lock_irqsave(&sp->rx_lock, flags);
4881         free_rx_buffers(sp);
4882         spin_unlock_irqrestore(&sp->rx_lock, flags);
4883
4884         clear_bit(0, &(sp->link_state));
4885 }
4886
4887 static int s2io_card_up(nic_t * sp)
4888 {
4889         int i, ret;
4890         mac_info_t *mac_control;
4891         struct config_param *config;
4892         struct net_device *dev = (struct net_device *) sp->dev;
4893
4894         /* Initialize the H/W I/O registers */
4895         if (init_nic(sp) != 0) {
4896                 DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",
4897                           dev->name);
4898                 return -ENODEV;
4899         }
4900
4901         /*
4902          * Initializing the Rx buffers. For now we are considering only 1
4903          * Rx ring and initializing buffers into 30 Rx blocks
4904          */
4905         mac_control = &sp->mac_control;
4906         config = &sp->config;
4907
4908         for (i = 0; i < config->rx_ring_num; i++) {
4909                 if ((ret = fill_rx_buffers(sp, i))) {
4910                         DBG_PRINT(ERR_DBG, "%s: Out of memory in Open\n",
4911                                   dev->name);
4912                         s2io_reset(sp);
4913                         free_rx_buffers(sp);
4914                         return -ENOMEM;
4915                 }
4916                 DBG_PRINT(INFO_DBG, "Buf in ring:%d is %d:\n", i,
4917                           atomic_read(&sp->rx_bufs_left[i]));
4918         }
4919
4920         /* Setting its receive mode */
4921         s2io_set_multicast(dev);
4922
4923         /* Enable tasklet for the device */
4924         tasklet_init(&sp->task, s2io_tasklet, (unsigned long) dev);
4925
4926         /* Enable Rx Traffic and interrupts on the NIC */
4927         if (start_nic(sp)) {
4928                 DBG_PRINT(ERR_DBG, "%s: Starting NIC failed\n", dev->name);
4929                 tasklet_kill(&sp->task);
4930                 s2io_reset(sp);
4931                 free_irq(dev->irq, dev);
4932                 free_rx_buffers(sp);
4933                 return -ENODEV;
4934         }
4935
4936         S2IO_TIMER_CONF(sp->alarm_timer, s2io_alarm_handle, sp, (HZ/2));
4937
4938         atomic_set(&sp->card_state, CARD_UP);
4939         return 0;
4940 }
4941
4942 /**
4943  * s2io_restart_nic - Resets the NIC.
4944  * @data : long pointer to the device private structure
4945  * Description:
4946  * This function is scheduled to be run by the s2io_tx_watchdog
4947  * function after 0.5 secs to reset the NIC. The idea is to reduce
4948  * the run time of the watch dog routine which is run holding a
4949  * spin lock.
4950  */
4951
4952 static void s2io_restart_nic(unsigned long data)
4953 {
4954         struct net_device *dev = (struct net_device *) data;
4955         nic_t *sp = dev->priv;
4956
4957         s2io_card_down(sp);
4958         if (s2io_card_up(sp)) {
4959                 DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n",
4960                           dev->name);
4961         }
4962         netif_wake_queue(dev);
4963         DBG_PRINT(ERR_DBG, "%s: was reset by Tx watchdog timer\n",
4964                   dev->name);
4965
4966 }
4967
4968 /**
4969  *  s2io_tx_watchdog - Watchdog for transmit side.
4970  *  @dev : Pointer to net device structure
4971  *  Description:
4972  *  This function is triggered if the Tx Queue is stopped
4973  *  for a pre-defined amount of time when the Interface is still up.
4974  *  If the Interface is jammed in such a situation, the hardware is
4975  *  reset (by s2io_close) and restarted again (by s2io_open) to
4976  *  overcome any problem that might have been caused in the hardware.
4977  *  Return value:
4978  *  void
4979  */
4980
4981 static void s2io_tx_watchdog(struct net_device *dev)
4982 {
4983         nic_t *sp = dev->priv;
4984
4985         if (netif_carrier_ok(dev)) {
4986                 schedule_work(&sp->rst_timer_task);
4987         }
4988 }
4989
4990 /**
4991  *   rx_osm_handler - To perform some OS related operations on SKB.
4992  *   @sp: private member of the device structure,pointer to s2io_nic structure.
4993  *   @skb : the socket buffer pointer.
4994  *   @len : length of the packet
4995  *   @cksum : FCS checksum of the frame.
4996  *   @ring_no : the ring from which this RxD was extracted.
4997  *   Description:
4998  *   This function is called by the Tx interrupt serivce routine to perform
4999  *   some OS related operations on the SKB before passing it to the upper
5000  *   layers. It mainly checks if the checksum is OK, if so adds it to the
5001  *   SKBs cksum variable, increments the Rx packet count and passes the SKB
5002  *   to the upper layer. If the checksum is wrong, it increments the Rx
5003  *   packet error count, frees the SKB and returns error.
5004  *   Return value:
5005  *   SUCCESS on success and -1 on failure.
5006  */
5007 static int rx_osm_handler(ring_info_t *ring_data, RxD_t * rxdp)
5008 {
5009         nic_t *sp = ring_data->nic;
5010         struct net_device *dev = (struct net_device *) sp->dev;
5011         struct sk_buff *skb = (struct sk_buff *)
5012                 ((unsigned long) rxdp->Host_Control);
5013         int ring_no = ring_data->ring_no;
5014         u16 l3_csum, l4_csum;
5015 #ifdef CONFIG_2BUFF_MODE
5016         int buf0_len = RXD_GET_BUFFER0_SIZE(rxdp->Control_2);
5017         int buf2_len = RXD_GET_BUFFER2_SIZE(rxdp->Control_2);
5018         int get_block = ring_data->rx_curr_get_info.block_index;
5019         int get_off = ring_data->rx_curr_get_info.offset;
5020         buffAdd_t *ba = &ring_data->ba[get_block][get_off];
5021         unsigned char *buff;
5022 #else
5023         u16 len = (u16) ((RXD_GET_BUFFER0_SIZE(rxdp->Control_2)) >> 48);;
5024 #endif
5025         skb->dev = dev;
5026         if (rxdp->Control_1 & RXD_T_CODE) {
5027                 unsigned long long err = rxdp->Control_1 & RXD_T_CODE;
5028                 DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%llx\n",
5029                           dev->name, err);
5030                 dev_kfree_skb(skb);
5031                 sp->stats.rx_crc_errors++;
5032                 atomic_dec(&sp->rx_bufs_left[ring_no]);
5033                 rxdp->Host_Control = 0;
5034                 return 0;
5035         }
5036
5037         /* Updating statistics */
5038         rxdp->Host_Control = 0;
5039         sp->rx_pkt_count++;
5040         sp->stats.rx_packets++;
5041 #ifndef CONFIG_2BUFF_MODE
5042         sp->stats.rx_bytes += len;
5043 #else
5044         sp->stats.rx_bytes += buf0_len + buf2_len;
5045 #endif
5046
5047 #ifndef CONFIG_2BUFF_MODE
5048         skb_put(skb, len);
5049 #else
5050         buff = skb_push(skb, buf0_len);
5051         memcpy(buff, ba->ba_0, buf0_len);
5052         skb_put(skb, buf2_len);
5053 #endif
5054
5055         if ((rxdp->Control_1 & TCP_OR_UDP_FRAME) &&
5056             (sp->rx_csum)) {
5057                 l3_csum = RXD_GET_L3_CKSUM(rxdp->Control_1);
5058                 l4_csum = RXD_GET_L4_CKSUM(rxdp->Control_1);
5059                 if ((l3_csum == L3_CKSUM_OK) && (l4_csum == L4_CKSUM_OK)) {
5060                         /*
5061                          * NIC verifies if the Checksum of the received
5062                          * frame is Ok or not and accordingly returns
5063                          * a flag in the RxD.
5064                          */
5065                         skb->ip_summed = CHECKSUM_UNNECESSARY;
5066                 } else {
5067                         /*
5068                          * Packet with erroneous checksum, let the
5069                          * upper layers deal with it.
5070                          */
5071                         skb->ip_summed = CHECKSUM_NONE;
5072                 }
5073         } else {
5074                 skb->ip_summed = CHECKSUM_NONE;
5075         }
5076
5077         skb->protocol = eth_type_trans(skb, dev);
5078 #ifdef CONFIG_S2IO_NAPI
5079         if (sp->vlgrp && RXD_GET_VLAN_TAG(rxdp->Control_2)) {
5080                 /* Queueing the vlan frame to the upper layer */
5081                 vlan_hwaccel_receive_skb(skb, sp->vlgrp,
5082                         RXD_GET_VLAN_TAG(rxdp->Control_2));
5083         } else {
5084                 netif_receive_skb(skb);
5085         }
5086 #else
5087         if (sp->vlgrp && RXD_GET_VLAN_TAG(rxdp->Control_2)) {
5088                 /* Queueing the vlan frame to the upper layer */
5089                 vlan_hwaccel_rx(skb, sp->vlgrp,
5090                         RXD_GET_VLAN_TAG(rxdp->Control_2));
5091         } else {
5092                 netif_rx(skb);
5093         }
5094 #endif
5095         dev->last_rx = jiffies;
5096         atomic_dec(&sp->rx_bufs_left[ring_no]);
5097         return SUCCESS;
5098 }
5099
5100 /**
5101  *  s2io_link - stops/starts the Tx queue.
5102  *  @sp : private member of the device structure, which is a pointer to the
5103  *  s2io_nic structure.
5104  *  @link : inidicates whether link is UP/DOWN.
5105  *  Description:
5106  *  This function stops/starts the Tx queue depending on whether the link
5107  *  status of the NIC is is down or up. This is called by the Alarm
5108  *  interrupt handler whenever a link change interrupt comes up.
5109  *  Return value:
5110  *  void.
5111  */
5112
5113 void s2io_link(nic_t * sp, int link)
5114 {
5115         struct net_device *dev = (struct net_device *) sp->dev;
5116
5117         if (link != sp->last_link_state) {
5118                 if (link == LINK_DOWN) {
5119                         DBG_PRINT(ERR_DBG, "%s: Link down\n", dev->name);
5120                         netif_carrier_off(dev);
5121                 } else {
5122                         DBG_PRINT(ERR_DBG, "%s: Link Up\n", dev->name);
5123                         netif_carrier_on(dev);
5124                 }
5125         }
5126         sp->last_link_state = link;
5127 }
5128
5129 /**
5130  *  get_xena_rev_id - to identify revision ID of xena.
5131  *  @pdev : PCI Dev structure
5132  *  Description:
5133  *  Function to identify the Revision ID of xena.
5134  *  Return value:
5135  *  returns the revision ID of the device.
5136  */
5137
5138 int get_xena_rev_id(struct pci_dev *pdev)
5139 {
5140         u8 id = 0;
5141         int ret;
5142         ret = pci_read_config_byte(pdev, PCI_REVISION_ID, (u8 *) & id);
5143         return id;
5144 }
5145
5146 /**
5147  *  s2io_init_pci -Initialization of PCI and PCI-X configuration registers .
5148  *  @sp : private member of the device structure, which is a pointer to the
5149  *  s2io_nic structure.
5150  *  Description:
5151  *  This function initializes a few of the PCI and PCI-X configuration registers
5152  *  with recommended values.
5153  *  Return value:
5154  *  void
5155  */
5156
5157 static void s2io_init_pci(nic_t * sp)
5158 {
5159         u16 pci_cmd = 0, pcix_cmd = 0;
5160
5161         /* Enable Data Parity Error Recovery in PCI-X command register. */
5162         pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
5163                              &(pcix_cmd));
5164         pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
5165                               (pcix_cmd | 1));
5166         pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
5167                              &(pcix_cmd));
5168
5169         /* Set the PErr Response bit in PCI command register. */
5170         pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd);
5171         pci_write_config_word(sp->pdev, PCI_COMMAND,
5172                               (pci_cmd | PCI_COMMAND_PARITY));
5173         pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd);
5174
5175         /* Forcibly disabling relaxed ordering capability of the card. */
5176         pcix_cmd &= 0xfffd;
5177         pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
5178                               pcix_cmd);
5179         pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
5180                              &(pcix_cmd));
5181 }
5182
5183 MODULE_AUTHOR("Raghavendra Koushik <raghavendra.koushik@neterion.com>");
5184 MODULE_LICENSE("GPL");
5185 module_param(tx_fifo_num, int, 0);
5186 module_param(rx_ring_num, int, 0);
5187 module_param_array(tx_fifo_len, uint, NULL, 0);
5188 module_param_array(rx_ring_sz, uint, NULL, 0);
5189 module_param_array(rts_frm_len, uint, NULL, 0);
5190 module_param(use_continuous_tx_intrs, int, 1);
5191 module_param(rmac_pause_time, int, 0);
5192 module_param(mc_pause_threshold_q0q3, int, 0);
5193 module_param(mc_pause_threshold_q4q7, int, 0);
5194 module_param(shared_splits, int, 0);
5195 module_param(tmac_util_period, int, 0);
5196 module_param(rmac_util_period, int, 0);
5197 module_param(bimodal, bool, 0);
5198 #ifndef CONFIG_S2IO_NAPI
5199 module_param(indicate_max_pkts, int, 0);
5200 #endif
5201 module_param(rxsync_frequency, int, 0);
5202
5203 /**
5204  *  s2io_init_nic - Initialization of the adapter .
5205  *  @pdev : structure containing the PCI related information of the device.
5206  *  @pre: List of PCI devices supported by the driver listed in s2io_tbl.
5207  *  Description:
5208  *  The function initializes an adapter identified by the pci_dec structure.
5209  *  All OS related initialization including memory and device structure and
5210  *  initlaization of the device private variable is done. Also the swapper
5211  *  control register is initialized to enable read and write into the I/O
5212  *  registers of the device.
5213  *  Return value:
5214  *  returns 0 on success and negative on failure.
5215  */
5216
5217 static int __devinit
5218 s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
5219 {
5220         nic_t *sp;
5221         struct net_device *dev;
5222         int i, j, ret;
5223         int dma_flag = FALSE;
5224         u32 mac_up, mac_down;
5225         u64 val64 = 0, tmp64 = 0;
5226         XENA_dev_config_t __iomem *bar0 = NULL;
5227         u16 subid;
5228         mac_info_t *mac_control;
5229         struct config_param *config;
5230         int mode;
5231
5232 #ifdef CONFIG_S2IO_NAPI
5233         DBG_PRINT(ERR_DBG, "NAPI support has been enabled\n");
5234 #endif
5235
5236         if ((ret = pci_enable_device(pdev))) {
5237                 DBG_PRINT(ERR_DBG,
5238                           "s2io_init_nic: pci_enable_device failed\n");
5239                 return ret;
5240         }
5241
5242         if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
5243                 DBG_PRINT(INIT_DBG, "s2io_init_nic: Using 64bit DMA\n");
5244                 dma_flag = TRUE;
5245                 if (pci_set_consistent_dma_mask
5246                     (pdev, DMA_64BIT_MASK)) {
5247                         DBG_PRINT(ERR_DBG,
5248                                   "Unable to obtain 64bit DMA for \
5249                                         consistent allocations\n");
5250                         pci_disable_device(pdev);
5251                         return -ENOMEM;
5252                 }
5253         } else if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
5254                 DBG_PRINT(INIT_DBG, "s2io_init_nic: Using 32bit DMA\n");
5255         } else {
5256                 pci_disable_device(pdev);
5257                 return -ENOMEM;
5258         }
5259
5260         if (pci_request_regions(pdev, s2io_driver_name)) {
5261                 DBG_PRINT(ERR_DBG, "Request Regions failed\n"),
5262                     pci_disable_device(pdev);
5263                 return -ENODEV;
5264         }
5265
5266         dev = alloc_etherdev(sizeof(nic_t));
5267         if (dev == NULL) {
5268                 DBG_PRINT(ERR_DBG, "Device allocation failed\n");
5269                 pci_disable_device(pdev);
5270                 pci_release_regions(pdev);
5271                 return -ENODEV;
5272         }
5273
5274         pci_set_master(pdev);
5275         pci_set_drvdata(pdev, dev);
5276         SET_MODULE_OWNER(dev);
5277         SET_NETDEV_DEV(dev, &pdev->dev);
5278
5279         /*  Private member variable initialized to s2io NIC structure */
5280         sp = dev->priv;
5281         memset(sp, 0, sizeof(nic_t));
5282         sp->dev = dev;
5283         sp->pdev = pdev;
5284         sp->high_dma_flag = dma_flag;
5285         sp->device_enabled_once = FALSE;
5286
5287         if ((pdev->device == PCI_DEVICE_ID_HERC_WIN) ||
5288                 (pdev->device == PCI_DEVICE_ID_HERC_UNI))
5289                 sp->device_type = XFRAME_II_DEVICE;
5290         else
5291                 sp->device_type = XFRAME_I_DEVICE;
5292
5293         /* Initialize some PCI/PCI-X fields of the NIC. */
5294         s2io_init_pci(sp);
5295
5296         /*
5297          * Setting the device configuration parameters.
5298          * Most of these parameters can be specified by the user during
5299          * module insertion as they are module loadable parameters. If
5300          * these parameters are not not specified during load time, they
5301          * are initialized with default values.
5302          */
5303         mac_control = &sp->mac_control;
5304         config = &sp->config;
5305
5306         /* Tx side parameters. */
5307         if (tx_fifo_len[0] == 0)
5308                 tx_fifo_len[0] = DEFAULT_FIFO_LEN; /* Default value. */
5309         config->tx_fifo_num = tx_fifo_num;
5310         for (i = 0; i < MAX_TX_FIFOS; i++) {
5311                 config->tx_cfg[i].fifo_len = tx_fifo_len[i];
5312                 config->tx_cfg[i].fifo_priority = i;
5313         }
5314
5315         /* mapping the QoS priority to the configured fifos */
5316         for (i = 0; i < MAX_TX_FIFOS; i++)
5317                 config->fifo_mapping[i] = fifo_map[config->tx_fifo_num][i];
5318
5319         config->tx_intr_type = TXD_INT_TYPE_UTILZ;
5320         for (i = 0; i < config->tx_fifo_num; i++) {
5321                 config->tx_cfg[i].f_no_snoop =
5322                     (NO_SNOOP_TXD | NO_SNOOP_TXD_BUFFER);
5323                 if (config->tx_cfg[i].fifo_len < 65) {
5324                         config->tx_intr_type = TXD_INT_TYPE_PER_LIST;
5325                         break;
5326                 }
5327         }
5328         config->max_txds = MAX_SKB_FRAGS;
5329
5330         /* Rx side parameters. */
5331         if (rx_ring_sz[0] == 0)
5332                 rx_ring_sz[0] = SMALL_BLK_CNT; /* Default value. */
5333         config->rx_ring_num = rx_ring_num;
5334         for (i = 0; i < MAX_RX_RINGS; i++) {
5335                 config->rx_cfg[i].num_rxd = rx_ring_sz[i] *
5336                     (MAX_RXDS_PER_BLOCK + 1);
5337                 config->rx_cfg[i].ring_priority = i;
5338         }
5339
5340         for (i = 0; i < rx_ring_num; i++) {
5341                 config->rx_cfg[i].ring_org = RING_ORG_BUFF1;
5342                 config->rx_cfg[i].f_no_snoop =
5343                     (NO_SNOOP_RXD | NO_SNOOP_RXD_BUFFER);
5344         }
5345
5346         /*  Setting Mac Control parameters */
5347         mac_control->rmac_pause_time = rmac_pause_time;
5348         mac_control->mc_pause_threshold_q0q3 = mc_pause_threshold_q0q3;
5349         mac_control->mc_pause_threshold_q4q7 = mc_pause_threshold_q4q7;
5350
5351
5352         /* Initialize Ring buffer parameters. */
5353         for (i = 0; i < config->rx_ring_num; i++)
5354                 atomic_set(&sp->rx_bufs_left[i], 0);
5355
5356         /* Initialize the number of ISRs currently running */
5357         atomic_set(&sp->isr_cnt, 0);
5358
5359         /*  initialize the shared memory used by the NIC and the host */
5360         if (init_shared_mem(sp)) {
5361                 DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n",
5362                           __FUNCTION__);
5363                 ret = -ENOMEM;
5364                 goto mem_alloc_failed;
5365         }
5366
5367         sp->bar0 = ioremap(pci_resource_start(pdev, 0),
5368                                      pci_resource_len(pdev, 0));
5369         if (!sp->bar0) {
5370                 DBG_PRINT(ERR_DBG, "%s: S2IO: cannot remap io mem1\n",
5371                           dev->name);
5372                 ret = -ENOMEM;
5373                 goto bar0_remap_failed;
5374         }
5375
5376         sp->bar1 = ioremap(pci_resource_start(pdev, 2),
5377                                      pci_resource_len(pdev, 2));
5378         if (!sp->bar1) {
5379                 DBG_PRINT(ERR_DBG, "%s: S2IO: cannot remap io mem2\n",
5380                           dev->name);
5381                 ret = -ENOMEM;
5382                 goto bar1_remap_failed;
5383         }
5384
5385         dev->irq = pdev->irq;
5386         dev->base_addr = (unsigned long) sp->bar0;
5387
5388         /* Initializing the BAR1 address as the start of the FIFO pointer. */
5389         for (j = 0; j < MAX_TX_FIFOS; j++) {
5390                 mac_control->tx_FIFO_start[j] = (TxFIFO_element_t __iomem *)
5391                     (sp->bar1 + (j * 0x00020000));
5392         }
5393
5394         /*  Driver entry points */
5395         dev->open = &s2io_open;
5396         dev->stop = &s2io_close;
5397         dev->hard_start_xmit = &s2io_xmit;
5398         dev->get_stats = &s2io_get_stats;
5399         dev->set_multicast_list = &s2io_set_multicast;
5400         dev->do_ioctl = &s2io_ioctl;
5401         dev->change_mtu = &s2io_change_mtu;
5402         SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
5403         dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
5404         dev->vlan_rx_register = s2io_vlan_rx_register;
5405         dev->vlan_rx_kill_vid = (void *)s2io_vlan_rx_kill_vid;
5406
5407         /*
5408          * will use eth_mac_addr() for  dev->set_mac_address
5409          * mac address will be set every time dev->open() is called
5410          */
5411 #if defined(CONFIG_S2IO_NAPI)
5412         dev->poll = s2io_poll;
5413         dev->weight = 32;
5414 #endif
5415
5416         dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
5417         if (sp->high_dma_flag == TRUE)
5418                 dev->features |= NETIF_F_HIGHDMA;
5419 #ifdef NETIF_F_TSO
5420         dev->features |= NETIF_F_TSO;
5421 #endif
5422
5423         dev->tx_timeout = &s2io_tx_watchdog;
5424         dev->watchdog_timeo = WATCH_DOG_TIMEOUT;
5425         INIT_WORK(&sp->rst_timer_task,
5426                   (void (*)(void *)) s2io_restart_nic, dev);
5427         INIT_WORK(&sp->set_link_task,
5428                   (void (*)(void *)) s2io_set_link, sp);
5429
5430         pci_save_state(sp->pdev);
5431
5432         /* Setting swapper control on the NIC, for proper reset operation */
5433         if (s2io_set_swapper(sp)) {
5434                 DBG_PRINT(ERR_DBG, "%s:swapper settings are wrong\n",
5435                           dev->name);
5436                 ret = -EAGAIN;
5437                 goto set_swap_failed;
5438         }
5439
5440         /* Verify if the Herc works on the slot its placed into */
5441         if (sp->device_type & XFRAME_II_DEVICE) {
5442                 mode = s2io_verify_pci_mode(sp);
5443                 if (mode < 0) {
5444                         DBG_PRINT(ERR_DBG, "%s: ", __FUNCTION__);
5445                         DBG_PRINT(ERR_DBG, " Unsupported PCI bus mode\n");
5446                         ret = -EBADSLT;
5447                         goto set_swap_failed;
5448                 }
5449         }
5450
5451         /* Not needed for Herc */
5452         if (sp->device_type & XFRAME_I_DEVICE) {
5453                 /*
5454                  * Fix for all "FFs" MAC address problems observed on
5455                  * Alpha platforms
5456                  */
5457                 fix_mac_address(sp);
5458                 s2io_reset(sp);
5459         }
5460
5461         /*
5462          * MAC address initialization.
5463          * For now only one mac address will be read and used.
5464          */
5465         bar0 = sp->bar0;
5466         val64 = RMAC_ADDR_CMD_MEM_RD | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
5467             RMAC_ADDR_CMD_MEM_OFFSET(0 + MAC_MAC_ADDR_START_OFFSET);
5468         writeq(val64, &bar0->rmac_addr_cmd_mem);
5469         wait_for_cmd_complete(sp);
5470
5471         tmp64 = readq(&bar0->rmac_addr_data0_mem);
5472         mac_down = (u32) tmp64;
5473         mac_up = (u32) (tmp64 >> 32);
5474
5475         memset(sp->def_mac_addr[0].mac_addr, 0, sizeof(ETH_ALEN));
5476
5477         sp->def_mac_addr[0].mac_addr[3] = (u8) (mac_up);
5478         sp->def_mac_addr[0].mac_addr[2] = (u8) (mac_up >> 8);
5479         sp->def_mac_addr[0].mac_addr[1] = (u8) (mac_up >> 16);
5480         sp->def_mac_addr[0].mac_addr[0] = (u8) (mac_up >> 24);
5481         sp->def_mac_addr[0].mac_addr[5] = (u8) (mac_down >> 16);
5482         sp->def_mac_addr[0].mac_addr[4] = (u8) (mac_down >> 24);
5483
5484         /*  Set the factory defined MAC address initially   */
5485         dev->addr_len = ETH_ALEN;
5486         memcpy(dev->dev_addr, sp->def_mac_addr, ETH_ALEN);
5487
5488         /*
5489          * Initialize the tasklet status and link state flags
5490          * and the card state parameter
5491          */
5492         atomic_set(&(sp->card_state), 0);
5493         sp->tasklet_status = 0;
5494         sp->link_state = 0;
5495
5496         /* Initialize spinlocks */
5497         spin_lock_init(&sp->tx_lock);
5498 #ifndef CONFIG_S2IO_NAPI
5499         spin_lock_init(&sp->put_lock);
5500 #endif
5501         spin_lock_init(&sp->rx_lock);
5502
5503         /*
5504          * SXE-002: Configure link and activity LED to init state
5505          * on driver load.
5506          */
5507         subid = sp->pdev->subsystem_device;
5508         if ((subid & 0xFF) >= 0x07) {
5509                 val64 = readq(&bar0->gpio_control);
5510                 val64 |= 0x0000800000000000ULL;
5511                 writeq(val64, &bar0->gpio_control);
5512                 val64 = 0x0411040400000000ULL;
5513                 writeq(val64, (void __iomem *) bar0 + 0x2700);
5514                 val64 = readq(&bar0->gpio_control);
5515         }
5516
5517         sp->rx_csum = 1;        /* Rx chksum verify enabled by default */
5518
5519         if (register_netdev(dev)) {
5520                 DBG_PRINT(ERR_DBG, "Device registration failed\n");
5521                 ret = -ENODEV;
5522                 goto register_failed;
5523         }
5524
5525         if (sp->device_type & XFRAME_II_DEVICE) {
5526                 DBG_PRINT(ERR_DBG, "%s: Neterion Xframe II 10GbE adapter ",
5527                           dev->name);
5528                 DBG_PRINT(ERR_DBG, "(rev %d), Driver %s\n",
5529                                 get_xena_rev_id(sp->pdev),
5530                                 s2io_driver_version);
5531                 DBG_PRINT(ERR_DBG, "MAC ADDR: %02x:%02x:%02x:%02x:%02x:%02x\n",
5532                           sp->def_mac_addr[0].mac_addr[0],
5533                           sp->def_mac_addr[0].mac_addr[1],
5534                           sp->def_mac_addr[0].mac_addr[2],
5535                           sp->def_mac_addr[0].mac_addr[3],
5536                           sp->def_mac_addr[0].mac_addr[4],
5537                           sp->def_mac_addr[0].mac_addr[5]);
5538                 mode = s2io_print_pci_mode(sp);
5539                 if (mode < 0) {
5540                         DBG_PRINT(ERR_DBG, " Unsupported PCI bus mode ");
5541                         ret = -EBADSLT;
5542                         goto set_swap_failed;
5543                 }
5544         } else {
5545                 DBG_PRINT(ERR_DBG, "%s: Neterion Xframe I 10GbE adapter ",
5546                           dev->name);
5547                 DBG_PRINT(ERR_DBG, "(rev %d), Driver %s\n",
5548                                         get_xena_rev_id(sp->pdev),
5549                                         s2io_driver_version);
5550                 DBG_PRINT(ERR_DBG, "MAC ADDR: %02x:%02x:%02x:%02x:%02x:%02x\n",
5551                           sp->def_mac_addr[0].mac_addr[0],
5552                           sp->def_mac_addr[0].mac_addr[1],
5553                           sp->def_mac_addr[0].mac_addr[2],
5554                           sp->def_mac_addr[0].mac_addr[3],
5555                           sp->def_mac_addr[0].mac_addr[4],
5556                           sp->def_mac_addr[0].mac_addr[5]);
5557         }
5558
5559         /* Initialize device name */
5560         strcpy(sp->name, dev->name);
5561         if (sp->device_type & XFRAME_II_DEVICE)
5562                 strcat(sp->name, ": Neterion Xframe II 10GbE adapter");
5563         else
5564                 strcat(sp->name, ": Neterion Xframe I 10GbE adapter");
5565
5566         /* Initialize bimodal Interrupts */
5567         sp->config.bimodal = bimodal;
5568         if (!(sp->device_type & XFRAME_II_DEVICE) && bimodal) {
5569                 sp->config.bimodal = 0;
5570                 DBG_PRINT(ERR_DBG,"%s:Bimodal intr not supported by Xframe I\n",
5571                         dev->name);
5572         }
5573
5574         /*
5575          * Make Link state as off at this point, when the Link change
5576          * interrupt comes the state will be automatically changed to
5577          * the right state.
5578          */
5579         netif_carrier_off(dev);
5580
5581         return 0;
5582
5583       register_failed:
5584       set_swap_failed:
5585         iounmap(sp->bar1);
5586       bar1_remap_failed:
5587         iounmap(sp->bar0);
5588       bar0_remap_failed:
5589       mem_alloc_failed:
5590         free_shared_mem(sp);
5591         pci_disable_device(pdev);
5592         pci_release_regions(pdev);
5593         pci_set_drvdata(pdev, NULL);
5594         free_netdev(dev);
5595
5596         return ret;
5597 }
5598
5599 /**
5600  * s2io_rem_nic - Free the PCI device
5601  * @pdev: structure containing the PCI related information of the device.
5602  * Description: This function is called by the Pci subsystem to release a
5603  * PCI device and free up all resource held up by the device. This could
5604  * be in response to a Hot plug event or when the driver is to be removed
5605  * from memory.
5606  */
5607
5608 static void __devexit s2io_rem_nic(struct pci_dev *pdev)
5609 {
5610         struct net_device *dev =
5611             (struct net_device *) pci_get_drvdata(pdev);
5612         nic_t *sp;
5613
5614         if (dev == NULL) {
5615                 DBG_PRINT(ERR_DBG, "Driver Data is NULL!!\n");
5616                 return;
5617         }
5618
5619         sp = dev->priv;
5620         unregister_netdev(dev);
5621
5622         free_shared_mem(sp);
5623         iounmap(sp->bar0);
5624         iounmap(sp->bar1);
5625         pci_disable_device(pdev);
5626         pci_release_regions(pdev);
5627         pci_set_drvdata(pdev, NULL);
5628         free_netdev(dev);
5629 }
5630
5631 /**
5632  * s2io_starter - Entry point for the driver
5633  * Description: This function is the entry point for the driver. It verifies
5634  * the module loadable parameters and initializes PCI configuration space.
5635  */
5636
5637 int __init s2io_starter(void)
5638 {
5639         return pci_module_init(&s2io_driver);
5640 }
5641
5642 /**
5643  * s2io_closer - Cleanup routine for the driver
5644  * Description: This function is the cleanup routine for the driver. It unregist * ers the driver.
5645  */
5646
5647 void s2io_closer(void)
5648 {
5649         pci_unregister_driver(&s2io_driver);
5650         DBG_PRINT(INIT_DBG, "cleanup done\n");
5651 }
5652
5653 module_init(s2io_starter);
5654 module_exit(s2io_closer);