2 * Amiga Buddha, Catweasel and X-Surf IDE Driver
4 * Copyright (C) 1997, 2001 by Geert Uytterhoeven and others
6 * This driver was written based on the specifications in README.buddha and
7 * the X-Surf info from Inside_XSurf.txt available at
8 * http://www.jschoenfeld.com
10 * This file is subject to the terms and conditions of the GNU General Public
11 * License. See the file COPYING in the main directory of this archive for
16 * - tune the timings using the speed-register
19 #include <linux/types.h>
21 #include <linux/interrupt.h>
22 #include <linux/blkdev.h>
23 #include <linux/hdreg.h>
24 #include <linux/zorro.h>
25 #include <linux/ide.h>
26 #include <linux/init.h>
28 #include <asm/amigahw.h>
29 #include <asm/amigaints.h>
33 * The Buddha has 2 IDE interfaces, the Catweasel has 3, X-Surf has 2
36 #define BUDDHA_NUM_HWIFS 2
37 #define CATWEASEL_NUM_HWIFS 3
38 #define XSURF_NUM_HWIFS 2
41 * Bases of the IDE interfaces (relative to the board address)
44 #define BUDDHA_BASE1 0x800
45 #define BUDDHA_BASE2 0xa00
46 #define BUDDHA_BASE3 0xc00
48 #define XSURF_BASE1 0xb000 /* 2.5" Interface */
49 #define XSURF_BASE2 0xd000 /* 3.5" Interface */
51 static u_int buddha_bases[CATWEASEL_NUM_HWIFS] __initdata = {
52 BUDDHA_BASE1, BUDDHA_BASE2, BUDDHA_BASE3
55 static u_int xsurf_bases[XSURF_NUM_HWIFS] __initdata = {
56 XSURF_BASE1, XSURF_BASE2
60 * Offsets from one of the above bases
63 #define BUDDHA_CONTROL 0x11a
69 #define BUDDHA_IRQ1 0xf00 /* MSB = 1, Harddisk is source of */
70 #define BUDDHA_IRQ2 0xf40 /* interrupt */
71 #define BUDDHA_IRQ3 0xf80
73 #define XSURF_IRQ1 0x7e
74 #define XSURF_IRQ2 0x7e
76 static int buddha_irqports[CATWEASEL_NUM_HWIFS] __initdata = {
77 BUDDHA_IRQ1, BUDDHA_IRQ2, BUDDHA_IRQ3
80 static int xsurf_irqports[XSURF_NUM_HWIFS] __initdata = {
81 XSURF_IRQ1, XSURF_IRQ2
84 #define BUDDHA_IRQ_MR 0xfc0 /* master interrupt enable */
91 typedef enum BuddhaType_Enum {
92 BOARD_BUDDHA, BOARD_CATWEASEL, BOARD_XSURF
95 static const char *buddha_board_name[] = { "Buddha", "Catweasel", "X-Surf" };
98 * Check and acknowledge the interrupt status
101 static int buddha_ack_intr(ide_hwif_t *hwif)
105 ch = z_readb(hwif->io_ports.irq_addr);
111 static int xsurf_ack_intr(ide_hwif_t *hwif)
115 ch = z_readb(hwif->io_ports.irq_addr);
116 /* X-Surf needs a 0 written to IRQ register to ensure ISA bit A11 stays at 0 */
117 z_writeb(0, hwif->io_ports.irq_addr);
123 static void __init buddha_setup_ports(hw_regs_t *hw, unsigned long base,
124 unsigned long ctl, unsigned long irq_port,
125 ide_ack_intr_t *ack_intr)
129 memset(hw, 0, sizeof(*hw));
131 hw->io_ports.data_addr = base;
133 for (i = 1; i < 8; i++)
134 hw->io_ports_array[i] = base + 2 + i * 4;
136 hw->io_ports.ctl_addr = ctl;
137 hw->io_ports.irq_addr = irq_port;
139 hw->irq = IRQ_AMIGA_PORTS;
140 hw->ack_intr = ack_intr;
142 hw->chipset = ide_generic;
146 * Probe for a Buddha or Catweasel IDE interface
149 static int __init buddha_init(void)
155 struct zorro_dev *z = NULL;
156 u_long buddha_board = 0;
158 int buddha_num_hwifs;
160 while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
162 u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
164 if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA) {
165 buddha_num_hwifs = BUDDHA_NUM_HWIFS;
167 } else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL) {
168 buddha_num_hwifs = CATWEASEL_NUM_HWIFS;
169 type=BOARD_CATWEASEL;
170 } else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF) {
171 buddha_num_hwifs = XSURF_NUM_HWIFS;
176 board = z->resource.start;
179 * FIXME: we now have selectable mmio v/s iomio transports.
182 if(type != BOARD_XSURF) {
183 if (!request_mem_region(board+BUDDHA_BASE1, 0x800, "IDE"))
186 if (!request_mem_region(board+XSURF_BASE1, 0x1000, "IDE"))
188 if (!request_mem_region(board+XSURF_BASE2, 0x1000, "IDE"))
190 if (!request_mem_region(board+XSURF_IRQ1, 0x8, "IDE")) {
191 release_mem_region(board+XSURF_BASE2, 0x1000);
193 release_mem_region(board+XSURF_BASE1, 0x1000);
197 buddha_board = ZTWO_VADDR(board);
199 /* write to BUDDHA_IRQ_MR to enable the board IRQ */
200 /* X-Surf doesn't have this. IRQs are always on */
201 if (type != BOARD_XSURF)
202 z_writeb(0, buddha_board+BUDDHA_IRQ_MR);
204 printk(KERN_INFO "ide: %s IDE controller\n",
205 buddha_board_name[type]);
207 for (i = 0; i < buddha_num_hwifs; i++) {
208 unsigned long base, ctl, irq_port;
209 ide_ack_intr_t *ack_intr;
211 if (type != BOARD_XSURF) {
212 base = buddha_board + buddha_bases[i];
213 ctl = base + BUDDHA_CONTROL;
214 irq_port = buddha_board + buddha_irqports[i];
215 ack_intr = buddha_ack_intr;
217 base = buddha_board + xsurf_bases[i];
218 /* X-Surf has no CS1* (Control/AltStat) */
220 irq_port = buddha_board + xsurf_irqports[i];
221 ack_intr = xsurf_ack_intr;
224 buddha_setup_ports(&hw, base, ctl, irq_port, ack_intr);
226 hwif = ide_find_port();
228 u8 index = hwif->index;
230 ide_init_port_data(hwif, index);
231 ide_init_port_hw(hwif, &hw);
237 ide_device_add(idx, NULL);
243 module_init(buddha_init);
245 MODULE_LICENSE("GPL");