Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
[linux-2.6] / drivers / char / vme_scc.c
1 /*
2  * drivers/char/vme_scc.c: MVME147, MVME162, BVME6000 SCC serial ports
3  * implementation.
4  * Copyright 1999 Richard Hirst <richard@sleepie.demon.co.uk>
5  *
6  * Based on atari_SCC.c which was
7  *   Copyright 1994-95 Roman Hodek <Roman.Hodek@informatik.uni-erlangen.de>
8  *   Partially based on PC-Linux serial.c by Linus Torvalds and Theodore Ts'o
9  *
10  * This file is subject to the terms and conditions of the GNU General Public
11  * License.  See the file COPYING in the main directory of this archive
12  * for more details.
13  *
14  */
15
16 #include <linux/module.h>
17 #include <linux/config.h>
18 #include <linux/kdev_t.h>
19 #include <asm/io.h>
20 #include <linux/kernel.h>
21 #include <linux/sched.h>
22 #include <linux/ioport.h>
23 #include <linux/interrupt.h>
24 #include <linux/errno.h>
25 #include <linux/tty.h>
26 #include <linux/tty_flip.h>
27 #include <linux/mm.h>
28 #include <linux/serial.h>
29 #include <linux/fcntl.h>
30 #include <linux/major.h>
31 #include <linux/delay.h>
32 #include <linux/slab.h>
33 #include <linux/miscdevice.h>
34 #include <linux/console.h>
35 #include <linux/init.h>
36 #include <asm/setup.h>
37 #include <asm/bootinfo.h>
38
39 #ifdef CONFIG_MVME147_SCC
40 #include <asm/mvme147hw.h>
41 #endif
42 #ifdef CONFIG_MVME162_SCC
43 #include <asm/mvme16xhw.h>
44 #endif
45 #ifdef CONFIG_BVME6000_SCC
46 #include <asm/bvme6000hw.h>
47 #endif
48
49 #include <linux/generic_serial.h>
50 #include "scc.h"
51
52
53 #define CHANNEL_A       0
54 #define CHANNEL_B       1
55
56 #define SCC_MINOR_BASE  64
57
58 /* Shadows for all SCC write registers */
59 static unsigned char scc_shadow[2][16];
60
61 /* Location to access for SCC register access delay */
62 static volatile unsigned char *scc_del = NULL;
63
64 /* To keep track of STATUS_REG state for detection of Ext/Status int source */
65 static unsigned char scc_last_status_reg[2];
66
67 /***************************** Prototypes *****************************/
68
69 /* Function prototypes */
70 static void scc_disable_tx_interrupts(void * ptr);
71 static void scc_enable_tx_interrupts(void * ptr);
72 static void scc_disable_rx_interrupts(void * ptr);
73 static void scc_enable_rx_interrupts(void * ptr);
74 static int  scc_get_CD(void * ptr);
75 static void scc_shutdown_port(void * ptr);
76 static int scc_set_real_termios(void  *ptr);
77 static void scc_hungup(void  *ptr);
78 static void scc_close(void  *ptr);
79 static int scc_chars_in_buffer(void * ptr);
80 static int scc_open(struct tty_struct * tty, struct file * filp);
81 static int scc_ioctl(struct tty_struct * tty, struct file * filp,
82                      unsigned int cmd, unsigned long arg);
83 static void scc_throttle(struct tty_struct *tty);
84 static void scc_unthrottle(struct tty_struct *tty);
85 static irqreturn_t scc_tx_int(int irq, void *data, struct pt_regs *fp);
86 static irqreturn_t scc_rx_int(int irq, void *data, struct pt_regs *fp);
87 static irqreturn_t scc_stat_int(int irq, void *data, struct pt_regs *fp);
88 static irqreturn_t scc_spcond_int(int irq, void *data, struct pt_regs *fp);
89 static void scc_setsignals(struct scc_port *port, int dtr, int rts);
90 static void scc_break_ctl(struct tty_struct *tty, int break_state);
91
92 static struct tty_driver *scc_driver;
93
94 struct scc_port scc_ports[2];
95
96 int scc_initialized = 0;
97
98 /*---------------------------------------------------------------------------
99  * Interface from generic_serial.c back here
100  *--------------------------------------------------------------------------*/
101
102 static struct real_driver scc_real_driver = {
103         scc_disable_tx_interrupts,
104         scc_enable_tx_interrupts,
105         scc_disable_rx_interrupts,
106         scc_enable_rx_interrupts,
107         scc_get_CD,
108         scc_shutdown_port,
109         scc_set_real_termios,
110         scc_chars_in_buffer,
111         scc_close,
112         scc_hungup,
113         NULL
114 };
115
116
117 static struct tty_operations scc_ops = {
118         .open   = scc_open,
119         .close = gs_close,
120         .write = gs_write,
121         .put_char = gs_put_char,
122         .flush_chars = gs_flush_chars,
123         .write_room = gs_write_room,
124         .chars_in_buffer = gs_chars_in_buffer,
125         .flush_buffer = gs_flush_buffer,
126         .ioctl = scc_ioctl,
127         .throttle = scc_throttle,
128         .unthrottle = scc_unthrottle,
129         .set_termios = gs_set_termios,
130         .stop = gs_stop,
131         .start = gs_start,
132         .hangup = gs_hangup,
133         .break_ctl = scc_break_ctl,
134 };
135
136 /*----------------------------------------------------------------------------
137  * vme_scc_init() and support functions
138  *---------------------------------------------------------------------------*/
139
140 static int scc_init_drivers(void)
141 {
142         int error;
143
144         scc_driver = alloc_tty_driver(2);
145         if (!scc_driver)
146                 return -ENOMEM;
147         scc_driver->owner = THIS_MODULE;
148         scc_driver->driver_name = "scc";
149         scc_driver->name = "ttyS";
150         scc_driver->devfs_name = "tts/";
151         scc_driver->major = TTY_MAJOR;
152         scc_driver->minor_start = SCC_MINOR_BASE;
153         scc_driver->type = TTY_DRIVER_TYPE_SERIAL;
154         scc_driver->subtype = SERIAL_TYPE_NORMAL;
155         scc_driver->init_termios = tty_std_termios;
156         scc_driver->init_termios.c_cflag =
157           B9600 | CS8 | CREAD | HUPCL | CLOCAL;
158         scc_driver->flags = TTY_DRIVER_REAL_RAW;
159         tty_set_operations(scc_driver, &scc_ops);
160
161         if ((error = tty_register_driver(scc_driver))) {
162                 printk(KERN_ERR "scc: Couldn't register scc driver, error = %d\n",
163                        error);
164                 put_tty_driver(scc_driver);
165                 return 1;
166         }
167
168         return 0;
169 }
170
171
172 /* ports[] array is indexed by line no (i.e. [0] for ttyS0, [1] for ttyS1).
173  */
174
175 static void scc_init_portstructs(void)
176 {
177         struct scc_port *port;
178         int i;
179
180         for (i = 0; i < 2; i++) {
181                 port = scc_ports + i;
182                 port->gs.magic = SCC_MAGIC;
183                 port->gs.close_delay = HZ/2;
184                 port->gs.closing_wait = 30 * HZ;
185                 port->gs.rd = &scc_real_driver;
186 #ifdef NEW_WRITE_LOCKING
187                 port->gs.port_write_sem = MUTEX;
188 #endif
189                 init_waitqueue_head(&port->gs.open_wait);
190                 init_waitqueue_head(&port->gs.close_wait);
191         }
192 }
193
194
195 #ifdef CONFIG_MVME147_SCC
196 static int mvme147_scc_init(void)
197 {
198         struct scc_port *port;
199
200         printk(KERN_INFO "SCC: MVME147 Serial Driver\n");
201         /* Init channel A */
202         port = &scc_ports[0];
203         port->channel = CHANNEL_A;
204         port->ctrlp = (volatile unsigned char *)M147_SCC_A_ADDR;
205         port->datap = port->ctrlp + 1;
206         port->port_a = &scc_ports[0];
207         port->port_b = &scc_ports[1];
208         request_irq(MVME147_IRQ_SCCA_TX, scc_tx_int, SA_INTERRUPT,
209                             "SCC-A TX", port);
210         request_irq(MVME147_IRQ_SCCA_STAT, scc_stat_int, SA_INTERRUPT,
211                             "SCC-A status", port);
212         request_irq(MVME147_IRQ_SCCA_RX, scc_rx_int, SA_INTERRUPT,
213                             "SCC-A RX", port);
214         request_irq(MVME147_IRQ_SCCA_SPCOND, scc_spcond_int, SA_INTERRUPT,
215                             "SCC-A special cond", port);
216         {
217                 SCC_ACCESS_INIT(port);
218
219                 /* disable interrupts for this channel */
220                 SCCwrite(INT_AND_DMA_REG, 0);
221                 /* Set the interrupt vector */
222                 SCCwrite(INT_VECTOR_REG, MVME147_IRQ_SCC_BASE);
223                 /* Interrupt parameters: vector includes status, status low */
224                 SCCwrite(MASTER_INT_CTRL, MIC_VEC_INCL_STAT);
225                 SCCmod(MASTER_INT_CTRL, 0xff, MIC_MASTER_INT_ENAB);
226         }
227
228         /* Init channel B */
229         port = &scc_ports[1];
230         port->channel = CHANNEL_B;
231         port->ctrlp = (volatile unsigned char *)M147_SCC_B_ADDR;
232         port->datap = port->ctrlp + 1;
233         port->port_a = &scc_ports[0];
234         port->port_b = &scc_ports[1];
235         request_irq(MVME147_IRQ_SCCB_TX, scc_tx_int, SA_INTERRUPT,
236                             "SCC-B TX", port);
237         request_irq(MVME147_IRQ_SCCB_STAT, scc_stat_int, SA_INTERRUPT,
238                             "SCC-B status", port);
239         request_irq(MVME147_IRQ_SCCB_RX, scc_rx_int, SA_INTERRUPT,
240                             "SCC-B RX", port);
241         request_irq(MVME147_IRQ_SCCB_SPCOND, scc_spcond_int, SA_INTERRUPT,
242                             "SCC-B special cond", port);
243         {
244                 SCC_ACCESS_INIT(port);
245
246                 /* disable interrupts for this channel */
247                 SCCwrite(INT_AND_DMA_REG, 0);
248         }
249
250         /* Ensure interrupts are enabled in the PCC chip */
251         m147_pcc->serial_cntrl=PCC_LEVEL_SERIAL|PCC_INT_ENAB;
252
253         /* Initialise the tty driver structures and register */
254         scc_init_portstructs();
255         scc_init_drivers();
256
257         return 0;
258 }
259 #endif
260
261
262 #ifdef CONFIG_MVME162_SCC
263 static int mvme162_scc_init(void)
264 {
265         struct scc_port *port;
266
267         if (!(mvme16x_config & MVME16x_CONFIG_GOT_SCCA))
268                 return (-ENODEV);
269
270         printk(KERN_INFO "SCC: MVME162 Serial Driver\n");
271         /* Init channel A */
272         port = &scc_ports[0];
273         port->channel = CHANNEL_A;
274         port->ctrlp = (volatile unsigned char *)MVME_SCC_A_ADDR;
275         port->datap = port->ctrlp + 2;
276         port->port_a = &scc_ports[0];
277         port->port_b = &scc_ports[1];
278         request_irq(MVME162_IRQ_SCCA_TX, scc_tx_int, SA_INTERRUPT,
279                             "SCC-A TX", port);
280         request_irq(MVME162_IRQ_SCCA_STAT, scc_stat_int, SA_INTERRUPT,
281                             "SCC-A status", port);
282         request_irq(MVME162_IRQ_SCCA_RX, scc_rx_int, SA_INTERRUPT,
283                             "SCC-A RX", port);
284         request_irq(MVME162_IRQ_SCCA_SPCOND, scc_spcond_int, SA_INTERRUPT,
285                             "SCC-A special cond", port);
286         {
287                 SCC_ACCESS_INIT(port);
288
289                 /* disable interrupts for this channel */
290                 SCCwrite(INT_AND_DMA_REG, 0);
291                 /* Set the interrupt vector */
292                 SCCwrite(INT_VECTOR_REG, MVME162_IRQ_SCC_BASE);
293                 /* Interrupt parameters: vector includes status, status low */
294                 SCCwrite(MASTER_INT_CTRL, MIC_VEC_INCL_STAT);
295                 SCCmod(MASTER_INT_CTRL, 0xff, MIC_MASTER_INT_ENAB);
296         }
297
298         /* Init channel B */
299         port = &scc_ports[1];
300         port->channel = CHANNEL_B;
301         port->ctrlp = (volatile unsigned char *)MVME_SCC_B_ADDR;
302         port->datap = port->ctrlp + 2;
303         port->port_a = &scc_ports[0];
304         port->port_b = &scc_ports[1];
305         request_irq(MVME162_IRQ_SCCB_TX, scc_tx_int, SA_INTERRUPT,
306                             "SCC-B TX", port);
307         request_irq(MVME162_IRQ_SCCB_STAT, scc_stat_int, SA_INTERRUPT,
308                             "SCC-B status", port);
309         request_irq(MVME162_IRQ_SCCB_RX, scc_rx_int, SA_INTERRUPT,
310                             "SCC-B RX", port);
311         request_irq(MVME162_IRQ_SCCB_SPCOND, scc_spcond_int, SA_INTERRUPT,
312                             "SCC-B special cond", port);
313
314         {
315                 SCC_ACCESS_INIT(port);  /* Either channel will do */
316
317                 /* disable interrupts for this channel */
318                 SCCwrite(INT_AND_DMA_REG, 0);
319         }
320
321         /* Ensure interrupts are enabled in the MC2 chip */
322         *(volatile char *)0xfff4201d = 0x14;
323
324         /* Initialise the tty driver structures and register */
325         scc_init_portstructs();
326         scc_init_drivers();
327
328         return 0;
329 }
330 #endif
331
332
333 #ifdef CONFIG_BVME6000_SCC
334 static int bvme6000_scc_init(void)
335 {
336         struct scc_port *port;
337
338         printk(KERN_INFO "SCC: BVME6000 Serial Driver\n");
339         /* Init channel A */
340         port = &scc_ports[0];
341         port->channel = CHANNEL_A;
342         port->ctrlp = (volatile unsigned char *)BVME_SCC_A_ADDR;
343         port->datap = port->ctrlp + 4;
344         port->port_a = &scc_ports[0];
345         port->port_b = &scc_ports[1];
346         request_irq(BVME_IRQ_SCCA_TX, scc_tx_int, SA_INTERRUPT,
347                             "SCC-A TX", port);
348         request_irq(BVME_IRQ_SCCA_STAT, scc_stat_int, SA_INTERRUPT,
349                             "SCC-A status", port);
350         request_irq(BVME_IRQ_SCCA_RX, scc_rx_int, SA_INTERRUPT,
351                             "SCC-A RX", port);
352         request_irq(BVME_IRQ_SCCA_SPCOND, scc_spcond_int, SA_INTERRUPT,
353                             "SCC-A special cond", port);
354         {
355                 SCC_ACCESS_INIT(port);
356
357                 /* disable interrupts for this channel */
358                 SCCwrite(INT_AND_DMA_REG, 0);
359                 /* Set the interrupt vector */
360                 SCCwrite(INT_VECTOR_REG, BVME_IRQ_SCC_BASE);
361                 /* Interrupt parameters: vector includes status, status low */
362                 SCCwrite(MASTER_INT_CTRL, MIC_VEC_INCL_STAT);
363                 SCCmod(MASTER_INT_CTRL, 0xff, MIC_MASTER_INT_ENAB);
364         }
365
366         /* Init channel B */
367         port = &scc_ports[1];
368         port->channel = CHANNEL_B;
369         port->ctrlp = (volatile unsigned char *)BVME_SCC_B_ADDR;
370         port->datap = port->ctrlp + 4;
371         port->port_a = &scc_ports[0];
372         port->port_b = &scc_ports[1];
373         request_irq(BVME_IRQ_SCCB_TX, scc_tx_int, SA_INTERRUPT,
374                             "SCC-B TX", port);
375         request_irq(BVME_IRQ_SCCB_STAT, scc_stat_int, SA_INTERRUPT,
376                             "SCC-B status", port);
377         request_irq(BVME_IRQ_SCCB_RX, scc_rx_int, SA_INTERRUPT,
378                             "SCC-B RX", port);
379         request_irq(BVME_IRQ_SCCB_SPCOND, scc_spcond_int, SA_INTERRUPT,
380                             "SCC-B special cond", port);
381
382         {
383                 SCC_ACCESS_INIT(port);  /* Either channel will do */
384
385                 /* disable interrupts for this channel */
386                 SCCwrite(INT_AND_DMA_REG, 0);
387         }
388
389         /* Initialise the tty driver structures and register */
390         scc_init_portstructs();
391         scc_init_drivers();
392
393         return 0;
394 }
395 #endif
396
397
398 static int vme_scc_init(void)
399 {
400         int res = -ENODEV;
401
402 #ifdef CONFIG_MVME147_SCC
403         if (MACH_IS_MVME147)
404                 res = mvme147_scc_init();
405 #endif
406 #ifdef CONFIG_MVME162_SCC
407         if (MACH_IS_MVME16x)
408                 res = mvme162_scc_init();
409 #endif
410 #ifdef CONFIG_BVME6000_SCC
411         if (MACH_IS_BVME6000)
412                 res = bvme6000_scc_init();
413 #endif
414         return res;
415 }
416
417 module_init(vme_scc_init);
418
419
420 /*---------------------------------------------------------------------------
421  * Interrupt handlers
422  *--------------------------------------------------------------------------*/
423
424 static irqreturn_t scc_rx_int(int irq, void *data, struct pt_regs *fp)
425 {
426         unsigned char   ch;
427         struct scc_port *port = data;
428         struct tty_struct *tty = port->gs.tty;
429         SCC_ACCESS_INIT(port);
430
431         ch = SCCread_NB(RX_DATA_REG);
432         if (!tty) {
433                 printk(KERN_WARNING "scc_rx_int with NULL tty!\n");
434                 SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
435                 return IRQ_HANDLED;
436         }
437         if (tty->flip.count < TTY_FLIPBUF_SIZE) {
438                 *tty->flip.char_buf_ptr = ch;
439                 *tty->flip.flag_buf_ptr = 0;
440                 tty->flip.flag_buf_ptr++;
441                 tty->flip.char_buf_ptr++;
442                 tty->flip.count++;
443         }
444
445         /* Check if another character is already ready; in that case, the
446          * spcond_int() function must be used, because this character may have an
447          * error condition that isn't signalled by the interrupt vector used!
448          */
449         if (SCCread(INT_PENDING_REG) &
450             (port->channel == CHANNEL_A ? IPR_A_RX : IPR_B_RX)) {
451                 scc_spcond_int (irq, data, fp);
452                 return IRQ_HANDLED;
453         }
454
455         SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
456
457         tty_flip_buffer_push(tty);
458         return IRQ_HANDLED;
459 }
460
461
462 static irqreturn_t scc_spcond_int(int irq, void *data, struct pt_regs *fp)
463 {
464         struct scc_port *port = data;
465         struct tty_struct *tty = port->gs.tty;
466         unsigned char   stat, ch, err;
467         int             int_pending_mask = port->channel == CHANNEL_A ?
468                                            IPR_A_RX : IPR_B_RX;
469         SCC_ACCESS_INIT(port);
470         
471         if (!tty) {
472                 printk(KERN_WARNING "scc_spcond_int with NULL tty!\n");
473                 SCCwrite(COMMAND_REG, CR_ERROR_RESET);
474                 SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
475                 return IRQ_HANDLED;
476         }
477         do {
478                 stat = SCCread(SPCOND_STATUS_REG);
479                 ch = SCCread_NB(RX_DATA_REG);
480
481                 if (stat & SCSR_RX_OVERRUN)
482                         err = TTY_OVERRUN;
483                 else if (stat & SCSR_PARITY_ERR)
484                         err = TTY_PARITY;
485                 else if (stat & SCSR_CRC_FRAME_ERR)
486                         err = TTY_FRAME;
487                 else
488                         err = 0;
489
490                 if (tty->flip.count < TTY_FLIPBUF_SIZE) {
491                         *tty->flip.char_buf_ptr = ch;
492                         *tty->flip.flag_buf_ptr = err;
493                         tty->flip.flag_buf_ptr++;
494                         tty->flip.char_buf_ptr++;
495                         tty->flip.count++;
496                 }
497
498                 /* ++TeSche: *All* errors have to be cleared manually,
499                  * else the condition persists for the next chars
500                  */
501                 if (err)
502                   SCCwrite(COMMAND_REG, CR_ERROR_RESET);
503
504         } while(SCCread(INT_PENDING_REG) & int_pending_mask);
505
506         SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
507
508         tty_flip_buffer_push(tty);
509         return IRQ_HANDLED;
510 }
511
512
513 static irqreturn_t scc_tx_int(int irq, void *data, struct pt_regs *fp)
514 {
515         struct scc_port *port = data;
516         SCC_ACCESS_INIT(port);
517
518         if (!port->gs.tty) {
519                 printk(KERN_WARNING "scc_tx_int with NULL tty!\n");
520                 SCCmod (INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0);
521                 SCCwrite(COMMAND_REG, CR_TX_PENDING_RESET);
522                 SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
523                 return IRQ_HANDLED;
524         }
525         while ((SCCread_NB(STATUS_REG) & SR_TX_BUF_EMPTY)) {
526                 if (port->x_char) {
527                         SCCwrite(TX_DATA_REG, port->x_char);
528                         port->x_char = 0;
529                 }
530                 else if ((port->gs.xmit_cnt <= 0) || port->gs.tty->stopped ||
531                                 port->gs.tty->hw_stopped)
532                         break;
533                 else {
534                         SCCwrite(TX_DATA_REG, port->gs.xmit_buf[port->gs.xmit_tail++]);
535                         port->gs.xmit_tail = port->gs.xmit_tail & (SERIAL_XMIT_SIZE-1);
536                         if (--port->gs.xmit_cnt <= 0)
537                                 break;
538                 }
539         }
540         if ((port->gs.xmit_cnt <= 0) || port->gs.tty->stopped ||
541                         port->gs.tty->hw_stopped) {
542                 /* disable tx interrupts */
543                 SCCmod (INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0);
544                 SCCwrite(COMMAND_REG, CR_TX_PENDING_RESET);   /* disable tx_int on next tx underrun? */
545                 port->gs.flags &= ~GS_TX_INTEN;
546         }
547         if (port->gs.tty && port->gs.xmit_cnt <= port->gs.wakeup_chars)
548                 tty_wakeup(port->gs.tty);
549
550         SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
551         return IRQ_HANDLED;
552 }
553
554
555 static irqreturn_t scc_stat_int(int irq, void *data, struct pt_regs *fp)
556 {
557         struct scc_port *port = data;
558         unsigned channel = port->channel;
559         unsigned char   last_sr, sr, changed;
560         SCC_ACCESS_INIT(port);
561
562         last_sr = scc_last_status_reg[channel];
563         sr = scc_last_status_reg[channel] = SCCread_NB(STATUS_REG);
564         changed = last_sr ^ sr;
565
566         if (changed & SR_DCD) {
567                 port->c_dcd = !!(sr & SR_DCD);
568                 if (!(port->gs.flags & ASYNC_CHECK_CD))
569                         ;       /* Don't report DCD changes */
570                 else if (port->c_dcd) {
571                         wake_up_interruptible(&port->gs.open_wait);
572                 }
573                 else {
574                         if (port->gs.tty)
575                                 tty_hangup (port->gs.tty);
576                 }
577         }
578         SCCwrite(COMMAND_REG, CR_EXTSTAT_RESET);
579         SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
580         return IRQ_HANDLED;
581 }
582
583
584 /*---------------------------------------------------------------------------
585  * generic_serial.c callback funtions
586  *--------------------------------------------------------------------------*/
587
588 static void scc_disable_tx_interrupts(void *ptr)
589 {
590         struct scc_port *port = ptr;
591         unsigned long   flags;
592         SCC_ACCESS_INIT(port);
593
594         local_irq_save(flags);
595         SCCmod(INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0);
596         port->gs.flags &= ~GS_TX_INTEN;
597         local_irq_restore(flags);
598 }
599
600
601 static void scc_enable_tx_interrupts(void *ptr)
602 {
603         struct scc_port *port = ptr;
604         unsigned long   flags;
605         SCC_ACCESS_INIT(port);
606
607         local_irq_save(flags);
608         SCCmod(INT_AND_DMA_REG, 0xff, IDR_TX_INT_ENAB);
609         /* restart the transmitter */
610         scc_tx_int (0, port, 0);
611         local_irq_restore(flags);
612 }
613
614
615 static void scc_disable_rx_interrupts(void *ptr)
616 {
617         struct scc_port *port = ptr;
618         unsigned long   flags;
619         SCC_ACCESS_INIT(port);
620
621         local_irq_save(flags);
622         SCCmod(INT_AND_DMA_REG,
623             ~(IDR_RX_INT_MASK|IDR_PARERR_AS_SPCOND|IDR_EXTSTAT_INT_ENAB), 0);
624         local_irq_restore(flags);
625 }
626
627
628 static void scc_enable_rx_interrupts(void *ptr)
629 {
630         struct scc_port *port = ptr;
631         unsigned long   flags;
632         SCC_ACCESS_INIT(port);
633
634         local_irq_save(flags);
635         SCCmod(INT_AND_DMA_REG, 0xff,
636                 IDR_EXTSTAT_INT_ENAB|IDR_PARERR_AS_SPCOND|IDR_RX_INT_ALL);
637         local_irq_restore(flags);
638 }
639
640
641 static int scc_get_CD(void *ptr)
642 {
643         struct scc_port *port = ptr;
644         unsigned channel = port->channel;
645
646         return !!(scc_last_status_reg[channel] & SR_DCD);
647 }
648
649
650 static void scc_shutdown_port(void *ptr)
651 {
652         struct scc_port *port = ptr;
653
654         port->gs.flags &= ~ GS_ACTIVE;
655         if (port->gs.tty && port->gs.tty->termios->c_cflag & HUPCL) {
656                 scc_setsignals (port, 0, 0);
657         }
658 }
659
660
661 static int scc_set_real_termios (void *ptr)
662 {
663         /* the SCC has char sizes 5,7,6,8 in that order! */
664         static int chsize_map[4] = { 0, 2, 1, 3 };
665         unsigned cflag, baud, chsize, channel, brgval = 0;
666         unsigned long flags;
667         struct scc_port *port = ptr;
668         SCC_ACCESS_INIT(port);
669
670         if (!port->gs.tty || !port->gs.tty->termios) return 0;
671
672         channel = port->channel;
673
674         if (channel == CHANNEL_A)
675                 return 0;               /* Settings controlled by boot PROM */
676
677         cflag  = port->gs.tty->termios->c_cflag;
678         baud = port->gs.baud;
679         chsize = (cflag & CSIZE) >> 4;
680
681         if (baud == 0) {
682                 /* speed == 0 -> drop DTR */
683                 local_irq_save(flags);
684                 SCCmod(TX_CTRL_REG, ~TCR_DTR, 0);
685                 local_irq_restore(flags);
686                 return 0;
687         }
688         else if ((MACH_IS_MVME16x && (baud < 50 || baud > 38400)) ||
689                  (MACH_IS_MVME147 && (baud < 50 || baud > 19200)) ||
690                  (MACH_IS_BVME6000 &&(baud < 50 || baud > 76800))) {
691                 printk(KERN_NOTICE "SCC: Bad speed requested, %d\n", baud);
692                 return 0;
693         }
694
695         if (cflag & CLOCAL)
696                 port->gs.flags &= ~ASYNC_CHECK_CD;
697         else
698                 port->gs.flags |= ASYNC_CHECK_CD;
699
700 #ifdef CONFIG_MVME147_SCC
701         if (MACH_IS_MVME147)
702                 brgval = (M147_SCC_PCLK + baud/2) / (16 * 2 * baud) - 2;
703 #endif
704 #ifdef CONFIG_MVME162_SCC
705         if (MACH_IS_MVME16x)
706                 brgval = (MVME_SCC_PCLK + baud/2) / (16 * 2 * baud) - 2;
707 #endif
708 #ifdef CONFIG_BVME6000_SCC
709         if (MACH_IS_BVME6000)
710                 brgval = (BVME_SCC_RTxC + baud/2) / (16 * 2 * baud) - 2;
711 #endif
712         /* Now we have all parameters and can go to set them: */
713         local_irq_save(flags);
714
715         /* receiver's character size and auto-enables */
716         SCCmod(RX_CTRL_REG, ~(RCR_CHSIZE_MASK|RCR_AUTO_ENAB_MODE),
717                         (chsize_map[chsize] << 6) |
718                         ((cflag & CRTSCTS) ? RCR_AUTO_ENAB_MODE : 0));
719         /* parity and stop bits (both, Tx and Rx), clock mode never changes */
720         SCCmod (AUX1_CTRL_REG,
721                 ~(A1CR_PARITY_MASK | A1CR_MODE_MASK),
722                 ((cflag & PARENB
723                   ? (cflag & PARODD ? A1CR_PARITY_ODD : A1CR_PARITY_EVEN)
724                   : A1CR_PARITY_NONE)
725                  | (cflag & CSTOPB ? A1CR_MODE_ASYNC_2 : A1CR_MODE_ASYNC_1)));
726         /* sender's character size, set DTR for valid baud rate */
727         SCCmod(TX_CTRL_REG, ~TCR_CHSIZE_MASK, chsize_map[chsize] << 5 | TCR_DTR);
728         /* clock sources never change */
729         /* disable BRG before changing the value */
730         SCCmod(DPLL_CTRL_REG, ~DCR_BRG_ENAB, 0);
731         /* BRG value */
732         SCCwrite(TIMER_LOW_REG, brgval & 0xff);
733         SCCwrite(TIMER_HIGH_REG, (brgval >> 8) & 0xff);
734         /* BRG enable, and clock source never changes */
735         SCCmod(DPLL_CTRL_REG, 0xff, DCR_BRG_ENAB);
736
737         local_irq_restore(flags);
738
739         return 0;
740 }
741
742
743 static int scc_chars_in_buffer (void *ptr)
744 {
745         struct scc_port *port = ptr;
746         SCC_ACCESS_INIT(port);
747
748         return (SCCread (SPCOND_STATUS_REG) & SCSR_ALL_SENT) ? 0  : 1;
749 }
750
751
752 /* Comment taken from sx.c (2.4.0):
753    I haven't the foggiest why the decrement use count has to happen
754    here. The whole linux serial drivers stuff needs to be redesigned.
755    My guess is that this is a hack to minimize the impact of a bug
756    elsewhere. Thinking about it some more. (try it sometime) Try
757    running minicom on a serial port that is driven by a modularized
758    driver. Have the modem hangup. Then remove the driver module. Then
759    exit minicom.  I expect an "oops".  -- REW */
760
761 static void scc_hungup(void *ptr)
762 {
763         scc_disable_tx_interrupts(ptr);
764         scc_disable_rx_interrupts(ptr);
765 }
766
767
768 static void scc_close(void *ptr)
769 {
770         scc_disable_tx_interrupts(ptr);
771         scc_disable_rx_interrupts(ptr);
772 }
773
774
775 /*---------------------------------------------------------------------------
776  * Internal support functions
777  *--------------------------------------------------------------------------*/
778
779 static void scc_setsignals(struct scc_port *port, int dtr, int rts)
780 {
781         unsigned long flags;
782         unsigned char t;
783         SCC_ACCESS_INIT(port);
784
785         local_irq_save(flags);
786         t = SCCread(TX_CTRL_REG);
787         if (dtr >= 0) t = dtr? (t | TCR_DTR): (t & ~TCR_DTR);
788         if (rts >= 0) t = rts? (t | TCR_RTS): (t & ~TCR_RTS);
789         SCCwrite(TX_CTRL_REG, t);
790         local_irq_restore(flags);
791 }
792
793
794 static void scc_send_xchar(struct tty_struct *tty, char ch)
795 {
796         struct scc_port *port = (struct scc_port *)tty->driver_data;
797
798         port->x_char = ch;
799         if (ch)
800                 scc_enable_tx_interrupts(port);
801 }
802
803
804 /*---------------------------------------------------------------------------
805  * Driver entrypoints referenced from above
806  *--------------------------------------------------------------------------*/
807
808 static int scc_open (struct tty_struct * tty, struct file * filp)
809 {
810         int line = tty->index;
811         int retval;
812         struct scc_port *port = &scc_ports[line];
813         int i, channel = port->channel;
814         unsigned long   flags;
815         SCC_ACCESS_INIT(port);
816 #if defined(CONFIG_MVME162_SCC) || defined(CONFIG_MVME147_SCC)
817         static const struct {
818                 unsigned reg, val;
819         } mvme_init_tab[] = {
820                 /* Values for MVME162 and MVME147 */
821                 /* no parity, 1 stop bit, async, 1:16 */
822                 { AUX1_CTRL_REG, A1CR_PARITY_NONE|A1CR_MODE_ASYNC_1|A1CR_CLKMODE_x16 },
823                 /* parity error is special cond, ints disabled, no DMA */
824                 { INT_AND_DMA_REG, IDR_PARERR_AS_SPCOND | IDR_RX_INT_DISAB },
825                 /* Rx 8 bits/char, no auto enable, Rx off */
826                 { RX_CTRL_REG, RCR_CHSIZE_8 },
827                 /* DTR off, Tx 8 bits/char, RTS off, Tx off */
828                 { TX_CTRL_REG, TCR_CHSIZE_8 },
829                 /* special features off */
830                 { AUX2_CTRL_REG, 0 },
831                 { CLK_CTRL_REG, CCR_RXCLK_BRG | CCR_TXCLK_BRG },
832                 { DPLL_CTRL_REG, DCR_BRG_ENAB | DCR_BRG_USE_PCLK },
833                 /* Start Rx */
834                 { RX_CTRL_REG, RCR_RX_ENAB | RCR_CHSIZE_8 },
835                 /* Start Tx */
836                 { TX_CTRL_REG, TCR_TX_ENAB | TCR_RTS | TCR_DTR | TCR_CHSIZE_8 },
837                 /* Ext/Stat ints: DCD only */
838                 { INT_CTRL_REG, ICR_ENAB_DCD_INT },
839                 /* Reset Ext/Stat ints */
840                 { COMMAND_REG, CR_EXTSTAT_RESET },
841                 /* ...again */
842                 { COMMAND_REG, CR_EXTSTAT_RESET },
843         };
844 #endif
845 #if defined(CONFIG_BVME6000_SCC)
846         static const struct {
847                 unsigned reg, val;
848         } bvme_init_tab[] = {
849                 /* Values for BVME6000 */
850                 /* no parity, 1 stop bit, async, 1:16 */
851                 { AUX1_CTRL_REG, A1CR_PARITY_NONE|A1CR_MODE_ASYNC_1|A1CR_CLKMODE_x16 },
852                 /* parity error is special cond, ints disabled, no DMA */
853                 { INT_AND_DMA_REG, IDR_PARERR_AS_SPCOND | IDR_RX_INT_DISAB },
854                 /* Rx 8 bits/char, no auto enable, Rx off */
855                 { RX_CTRL_REG, RCR_CHSIZE_8 },
856                 /* DTR off, Tx 8 bits/char, RTS off, Tx off */
857                 { TX_CTRL_REG, TCR_CHSIZE_8 },
858                 /* special features off */
859                 { AUX2_CTRL_REG, 0 },
860                 { CLK_CTRL_REG, CCR_RTxC_XTAL | CCR_RXCLK_BRG | CCR_TXCLK_BRG },
861                 { DPLL_CTRL_REG, DCR_BRG_ENAB },
862                 /* Start Rx */
863                 { RX_CTRL_REG, RCR_RX_ENAB | RCR_CHSIZE_8 },
864                 /* Start Tx */
865                 { TX_CTRL_REG, TCR_TX_ENAB | TCR_RTS | TCR_DTR | TCR_CHSIZE_8 },
866                 /* Ext/Stat ints: DCD only */
867                 { INT_CTRL_REG, ICR_ENAB_DCD_INT },
868                 /* Reset Ext/Stat ints */
869                 { COMMAND_REG, CR_EXTSTAT_RESET },
870                 /* ...again */
871                 { COMMAND_REG, CR_EXTSTAT_RESET },
872         };
873 #endif
874         if (!(port->gs.flags & ASYNC_INITIALIZED)) {
875                 local_irq_save(flags);
876 #if defined(CONFIG_MVME147_SCC) || defined(CONFIG_MVME162_SCC)
877                 if (MACH_IS_MVME147 || MACH_IS_MVME16x) {
878                         for (i=0; i<sizeof(mvme_init_tab)/sizeof(*mvme_init_tab); ++i)
879                                 SCCwrite(mvme_init_tab[i].reg, mvme_init_tab[i].val);
880                 }
881 #endif
882 #if defined(CONFIG_BVME6000_SCC)
883                 if (MACH_IS_BVME6000) {
884                         for (i=0; i<sizeof(bvme_init_tab)/sizeof(*bvme_init_tab); ++i)
885                                 SCCwrite(bvme_init_tab[i].reg, bvme_init_tab[i].val);
886                 }
887 #endif
888
889                 /* remember status register for detection of DCD and CTS changes */
890                 scc_last_status_reg[channel] = SCCread(STATUS_REG);
891
892                 port->c_dcd = 0;        /* Prevent initial 1->0 interrupt */
893                 scc_setsignals (port, 1,1);
894                 local_irq_restore(flags);
895         }
896
897         tty->driver_data = port;
898         port->gs.tty = tty;
899         port->gs.count++;
900         retval = gs_init_port(&port->gs);
901         if (retval) {
902                 port->gs.count--;
903                 return retval;
904         }
905         port->gs.flags |= GS_ACTIVE;
906         retval = gs_block_til_ready(port, filp);
907
908         if (retval) {
909                 port->gs.count--;
910                 return retval;
911         }
912
913         port->c_dcd = scc_get_CD (port);
914
915         scc_enable_rx_interrupts(port);
916
917         return 0;
918 }
919
920
921 static void scc_throttle (struct tty_struct * tty)
922 {
923         struct scc_port *port = (struct scc_port *)tty->driver_data;
924         unsigned long   flags;
925         SCC_ACCESS_INIT(port);
926
927         if (tty->termios->c_cflag & CRTSCTS) {
928                 local_irq_save(flags);
929                 SCCmod(TX_CTRL_REG, ~TCR_RTS, 0);
930                 local_irq_restore(flags);
931         }
932         if (I_IXOFF(tty))
933                 scc_send_xchar(tty, STOP_CHAR(tty));
934 }
935
936
937 static void scc_unthrottle (struct tty_struct * tty)
938 {
939         struct scc_port *port = (struct scc_port *)tty->driver_data;
940         unsigned long   flags;
941         SCC_ACCESS_INIT(port);
942
943         if (tty->termios->c_cflag & CRTSCTS) {
944                 local_irq_save(flags);
945                 SCCmod(TX_CTRL_REG, 0xff, TCR_RTS);
946                 local_irq_restore(flags);
947         }
948         if (I_IXOFF(tty))
949                 scc_send_xchar(tty, START_CHAR(tty));
950 }
951
952
953 static int scc_ioctl(struct tty_struct *tty, struct file *file,
954                      unsigned int cmd, unsigned long arg)
955 {
956         return -ENOIOCTLCMD;
957 }
958
959
960 static void scc_break_ctl(struct tty_struct *tty, int break_state)
961 {
962         struct scc_port *port = (struct scc_port *)tty->driver_data;
963         unsigned long   flags;
964         SCC_ACCESS_INIT(port);
965
966         local_irq_save(flags);
967         SCCmod(TX_CTRL_REG, ~TCR_SEND_BREAK, 
968                         break_state ? TCR_SEND_BREAK : 0);
969         local_irq_restore(flags);
970 }
971
972
973 /*---------------------------------------------------------------------------
974  * Serial console stuff...
975  *--------------------------------------------------------------------------*/
976
977 #define scc_delay() do { __asm__ __volatile__ (" nop; nop"); } while (0)
978
979 static void scc_ch_write (char ch)
980 {
981         volatile char *p = NULL;
982         
983 #ifdef CONFIG_MVME147_SCC
984         if (MACH_IS_MVME147)
985                 p = (volatile char *)M147_SCC_A_ADDR;
986 #endif
987 #ifdef CONFIG_MVME162_SCC
988         if (MACH_IS_MVME16x)
989                 p = (volatile char *)MVME_SCC_A_ADDR;
990 #endif
991 #ifdef CONFIG_BVME6000_SCC
992         if (MACH_IS_BVME6000)
993                 p = (volatile char *)BVME_SCC_A_ADDR;
994 #endif
995
996         do {
997                 scc_delay();
998         }
999         while (!(*p & 4));
1000         scc_delay();
1001         *p = 8;
1002         scc_delay();
1003         *p = ch;
1004 }
1005
1006 /* The console must be locked when we get here. */
1007
1008 static void scc_console_write (struct console *co, const char *str, unsigned count)
1009 {
1010         unsigned long   flags;
1011
1012         local_irq_save(flags);
1013
1014         while (count--)
1015         {
1016                 if (*str == '\n')
1017                         scc_ch_write ('\r');
1018                 scc_ch_write (*str++);
1019         }
1020         local_irq_restore(flags);
1021 }
1022
1023 static struct tty_driver *scc_console_device(struct console *c, int *index)
1024 {
1025         *index = c->index;
1026         return scc_driver;
1027 }
1028
1029
1030 static int __init scc_console_setup(struct console *co, char *options)
1031 {
1032         return 0;
1033 }
1034
1035
1036 static struct console sercons = {
1037         .name           = "ttyS",
1038         .write          = scc_console_write,
1039         .device         = scc_console_device,
1040         .setup          = scc_console_setup,
1041         .flags          = CON_PRINTBUFFER,
1042         .index          = -1,
1043 };
1044
1045
1046 static int __init vme_scc_console_init(void)
1047 {
1048         if (vme_brdtype == VME_TYPE_MVME147 ||
1049                         vme_brdtype == VME_TYPE_MVME162 ||
1050                         vme_brdtype == VME_TYPE_MVME172 ||
1051                         vme_brdtype == VME_TYPE_BVME4000 ||
1052                         vme_brdtype == VME_TYPE_BVME6000)
1053                 register_console(&sercons);
1054         return 0;
1055 }
1056 console_initcall(vme_scc_console_init);