git.oblomov.eu Git - linux-2.6/blob - drivers/ide/ide-acpi.c

   1 /*
   2  * Provides ACPI support for IDE drives.
   3  *
   4  * Copyright (C) 2005 Intel Corp.
   5  * Copyright (C) 2005 Randy Dunlap
   6  * Copyright (C) 2006 SUSE Linux Products GmbH
   7  * Copyright (C) 2006 Hannes Reinecke
   8  */
   9
  10 #include <linux/ata.h>
  11 #include <linux/delay.h>
  12 #include <linux/device.h>
  13 #include <linux/errno.h>
  14 #include <linux/kernel.h>
  15 #include <acpi/acpi.h>
  16 #include <linux/ide.h>
  17 #include <linux/pci.h>
  18 #include <linux/dmi.h>
  19
  20 #include <acpi/acpi_bus.h>
  21 #include <acpi/acnames.h>
  22 #include <acpi/acnamesp.h>
  23 #include <acpi/acparser.h>
  24 #include <acpi/acexcep.h>
  25 #include <acpi/acmacros.h>
  26 #include <acpi/actypes.h>
  27
  28 #define REGS_PER_GTF            7
  29 struct taskfile_array {
  30         u8      tfa[REGS_PER_GTF];      /* regs. 0x1f1 - 0x1f7 */
  31 };
  32
  33 struct GTM_buffer {
  34         u32     PIO_speed0;
  35         u32     DMA_speed0;
  36         u32     PIO_speed1;
  37         u32     DMA_speed1;
  38         u32     GTM_flags;
  39 };
  40
  41 struct ide_acpi_drive_link {
  42         acpi_handle      obj_handle;
  43         u8               idbuff[512];
  44 };
  45
  46 struct ide_acpi_hwif_link {
  47         ide_hwif_t                      *hwif;
  48         acpi_handle                      obj_handle;
  49         struct GTM_buffer                gtm;
  50         struct ide_acpi_drive_link       master;
  51         struct ide_acpi_drive_link       slave;
  52 };
  53
  54 #undef DEBUGGING
  55 /* note: adds function name and KERN_DEBUG */
  56 #ifdef DEBUGGING
  57 #define DEBPRINT(fmt, args...)  \
  58                 printk(KERN_DEBUG "%s: " fmt, __func__, ## args)
  59 #else
  60 #define DEBPRINT(fmt, args...)  do {} while (0)
  61 #endif  /* DEBUGGING */
  62
  63 static int ide_noacpi;
  64 module_param_named(noacpi, ide_noacpi, bool, 0);
  65 MODULE_PARM_DESC(noacpi, "disable IDE ACPI support");
  66
  67 static int ide_acpigtf;
  68 module_param_named(acpigtf, ide_acpigtf, bool, 0);
  69 MODULE_PARM_DESC(acpigtf, "enable IDE ACPI _GTF support");
  70
  71 static int ide_acpionboot;
  72 module_param_named(acpionboot, ide_acpionboot, bool, 0);
  73 MODULE_PARM_DESC(acpionboot, "call IDE ACPI methods on boot");
  74
  75 static bool ide_noacpi_psx;
  76 static int no_acpi_psx(const struct dmi_system_id *id)
  77 {
  78         ide_noacpi_psx = true;
  79         printk(KERN_NOTICE"%s detected - disable ACPI _PSx.\n", id->ident);
  80         return 0;
  81 }
  82
  83 static const struct dmi_system_id ide_acpi_dmi_table[] = {
  84         /* Bug 9673. */
  85         /* We should check if this is because ACPI NVS isn't save/restored. */
  86         {
  87                 .callback = no_acpi_psx,
  88                 .ident    = "HP nx9005",
  89                 .matches  = {
  90                         DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies Ltd."),
  91                         DMI_MATCH(DMI_BIOS_VERSION, "KAM1.60")
  92                 },
  93         },
  94
  95         { }     /* terminate list */
  96 };
  97
  98 static int ide_acpi_blacklist(void)
  99 {
 100         static int done;
 101         if (done)
 102                 return 0;
 103         done = 1;
 104         dmi_check_system(ide_acpi_dmi_table);
 105         return 0;
 106 }
 107
 108 /**
 109  * ide_get_dev_handle - finds acpi_handle and PCI device.function
 110  * @dev: device to locate
 111  * @handle: returned acpi_handle for @dev
 112  * @pcidevfn: return PCI device.func for @dev
 113  *
 114  * Returns the ACPI object handle to the corresponding PCI device.
 115  *
 116  * Returns 0 on success, <0 on error.
 117  */
 118 static int ide_get_dev_handle(struct device *dev, acpi_handle *handle,
 119                                acpi_integer *pcidevfn)
 120 {
 121         struct pci_dev *pdev = to_pci_dev(dev);
 122         unsigned int bus, devnum, func;
 123         acpi_integer addr;
 124         acpi_handle dev_handle;
 125         struct acpi_buffer buffer = {.length = ACPI_ALLOCATE_BUFFER,
 126                                         .pointer = NULL};
 127         acpi_status status;
 128         struct acpi_device_info *dinfo = NULL;
 129         int ret = -ENODEV;
 130
 131         bus = pdev->bus->number;
 132         devnum = PCI_SLOT(pdev->devfn);
 133         func = PCI_FUNC(pdev->devfn);
 134         /* ACPI _ADR encoding for PCI bus: */
 135         addr = (acpi_integer)(devnum << 16 | func);
 136
 137         DEBPRINT("ENTER: pci %02x:%02x.%01x\n", bus, devnum, func);
 138
 139         dev_handle = DEVICE_ACPI_HANDLE(dev);
 140         if (!dev_handle) {
 141                 DEBPRINT("no acpi handle for device\n");
 142                 goto err;
 143         }
 144
 145         status = acpi_get_object_info(dev_handle, &buffer);
 146         if (ACPI_FAILURE(status)) {
 147                 DEBPRINT("get_object_info for device failed\n");
 148                 goto err;
 149         }
 150         dinfo = buffer.pointer;
 151         if (dinfo && (dinfo->valid & ACPI_VALID_ADR) &&
 152             dinfo->address == addr) {
 153                 *pcidevfn = addr;
 154                 *handle = dev_handle;
 155         } else {
 156                 DEBPRINT("get_object_info for device has wrong "
 157                         " address: %llu, should be %u\n",
 158                         dinfo ? (unsigned long long)dinfo->address : -1ULL,
 159                         (unsigned int)addr);
 160                 goto err;
 161         }
 162
 163         DEBPRINT("for dev=0x%x.%x, addr=0x%llx, *handle=0x%p\n",
 164                  devnum, func, (unsigned long long)addr, *handle);
 165         ret = 0;
 166 err:
 167         kfree(dinfo);
 168         return ret;
 169 }
 170
 171 /**
 172  * ide_acpi_hwif_get_handle - Get ACPI object handle for a given hwif
 173  * @hwif: device to locate
 174  *
 175  * Retrieves the object handle for a given hwif.
 176  *
 177  * Returns handle on success, 0 on error.
 178  */
 179 static acpi_handle ide_acpi_hwif_get_handle(ide_hwif_t *hwif)
 180 {
 181         struct device           *dev = hwif->gendev.parent;
 182         acpi_handle             uninitialized_var(dev_handle);
 183         acpi_integer            pcidevfn;
 184         acpi_handle             chan_handle;
 185         int                     err;
 186
 187         DEBPRINT("ENTER: device %s\n", hwif->name);
 188
 189         if (!dev) {
 190                 DEBPRINT("no PCI device for %s\n", hwif->name);
 191                 return NULL;
 192         }
 193
 194         err = ide_get_dev_handle(dev, &dev_handle, &pcidevfn);
 195         if (err < 0) {
 196                 DEBPRINT("ide_get_dev_handle failed (%d)\n", err);
 197                 return NULL;
 198         }
 199
 200         /* get child objects of dev_handle == channel objects,
 201          * + _their_ children == drive objects */
 202         /* channel is hwif->channel */
 203         chan_handle = acpi_get_child(dev_handle, hwif->channel);
 204         DEBPRINT("chan adr=%d: handle=0x%p\n",
 205                  hwif->channel, chan_handle);
 206
 207         return chan_handle;
 208 }
 209
 210 /**
 211  * ide_acpi_drive_get_handle - Get ACPI object handle for a given drive
 212  * @drive: device to locate
 213  *
 214  * Retrieves the object handle of a given drive. According to the ACPI
 215  * spec the drive is a child of the hwif.
 216  *
 217  * Returns handle on success, 0 on error.
 218  */
 219 static acpi_handle ide_acpi_drive_get_handle(ide_drive_t *drive)
 220 {
 221         ide_hwif_t      *hwif = HWIF(drive);
 222         int              port;
 223         acpi_handle      drive_handle;
 224
 225         if (!hwif->acpidata)
 226                 return NULL;
 227
 228         if (!hwif->acpidata->obj_handle)
 229                 return NULL;
 230
 231         port = hwif->channel ? drive->dn - 2: drive->dn;
 232
 233         DEBPRINT("ENTER: %s at channel#: %d port#: %d\n",
 234                  drive->name, hwif->channel, port);
 235
 236
 237         /* TBD: could also check ACPI object VALID bits */
 238         drive_handle = acpi_get_child(hwif->acpidata->obj_handle, port);
 239         DEBPRINT("drive %s handle 0x%p\n", drive->name, drive_handle);
 240
 241         return drive_handle;
 242 }
 243
 244 /**
 245  * do_drive_get_GTF - get the drive bootup default taskfile settings
 246  * @drive: the drive for which the taskfile settings should be retrieved
 247  * @gtf_length: number of bytes of _GTF data returned at @gtf_address
 248  * @gtf_address: buffer containing _GTF taskfile arrays
 249  *
 250  * The _GTF method has no input parameters.
 251  * It returns a variable number of register set values (registers
 252  * hex 1F1..1F7, taskfiles).
 253  * The <variable number> is not known in advance, so have ACPI-CA
 254  * allocate the buffer as needed and return it, then free it later.
 255  *
 256  * The returned @gtf_length and @gtf_address are only valid if the
 257  * function return value is 0.
 258  */
 259 static int do_drive_get_GTF(ide_drive_t *drive,
 260                      unsigned int *gtf_length, unsigned long *gtf_address,
 261                      unsigned long *obj_loc)
 262 {
 263         acpi_status                     status;
 264         struct acpi_buffer              output;
 265         union acpi_object               *out_obj;
 266         ide_hwif_t                      *hwif = HWIF(drive);
 267         struct device                   *dev = hwif->gendev.parent;
 268         int                             err = -ENODEV;
 269         int                             port;
 270
 271         *gtf_length = 0;
 272         *gtf_address = 0UL;
 273         *obj_loc = 0UL;
 274
 275         if (ide_noacpi)
 276                 return 0;
 277
 278         if (!dev) {
 279                 DEBPRINT("no PCI device for %s\n", hwif->name);
 280                 goto out;
 281         }
 282
 283         if (!hwif->acpidata) {
 284                 DEBPRINT("no ACPI data for %s\n", hwif->name);
 285                 goto out;
 286         }
 287
 288         port = hwif->channel ? drive->dn - 2: drive->dn;
 289
 290         DEBPRINT("ENTER: %s at %s, port#: %d, hard_port#: %d\n",
 291                  hwif->name, dev->bus_id, port, hwif->channel);
 292
 293         if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0) {
 294                 DEBPRINT("%s drive %d:%d not present\n",
 295                          hwif->name, hwif->channel, port);
 296                 goto out;
 297         }
 298
 299         /* Get this drive's _ADR info. if not already known. */
 300         if (!drive->acpidata->obj_handle) {
 301                 drive->acpidata->obj_handle = ide_acpi_drive_get_handle(drive);
 302                 if (!drive->acpidata->obj_handle) {
 303                         DEBPRINT("No ACPI object found for %s\n",
 304                                  drive->name);
 305                         goto out;
 306                 }
 307         }
 308
 309         /* Setting up output buffer */
 310         output.length = ACPI_ALLOCATE_BUFFER;
 311         output.pointer = NULL;  /* ACPI-CA sets this; save/free it later */
 312
 313         /* _GTF has no input parameters */
 314         err = -EIO;
 315         status = acpi_evaluate_object(drive->acpidata->obj_handle, "_GTF",
 316                                       NULL, &output);
 317         if (ACPI_FAILURE(status)) {
 318                 printk(KERN_DEBUG
 319                        "%s: Run _GTF error: status = 0x%x\n",
 320                        __func__, status);
 321                 goto out;
 322         }
 323
 324         if (!output.length || !output.pointer) {
 325                 DEBPRINT("Run _GTF: "
 326                        "length or ptr is NULL (0x%llx, 0x%p)\n",
 327                        (unsigned long long)output.length,
 328                        output.pointer);
 329                 goto out;
 330         }
 331
 332         out_obj = output.pointer;
 333         if (out_obj->type != ACPI_TYPE_BUFFER) {
 334                 DEBPRINT("Run _GTF: error: "
 335                        "expected object type of ACPI_TYPE_BUFFER, "
 336                        "got 0x%x\n", out_obj->type);
 337                 err = -ENOENT;
 338                 kfree(output.pointer);
 339                 goto out;
 340         }
 341
 342         if (!out_obj->buffer.length || !out_obj->buffer.pointer ||
 343             out_obj->buffer.length % REGS_PER_GTF) {
 344                 printk(KERN_ERR
 345                        "%s: unexpected GTF length (%d) or addr (0x%p)\n",
 346                        __func__, out_obj->buffer.length,
 347                        out_obj->buffer.pointer);
 348                 err = -ENOENT;
 349                 kfree(output.pointer);
 350                 goto out;
 351         }
 352
 353         *gtf_length = out_obj->buffer.length;
 354         *gtf_address = (unsigned long)out_obj->buffer.pointer;
 355         *obj_loc = (unsigned long)out_obj;
 356         DEBPRINT("returning gtf_length=%d, gtf_address=0x%lx, obj_loc=0x%lx\n",
 357                  *gtf_length, *gtf_address, *obj_loc);
 358         err = 0;
 359 out:
 360         return err;
 361 }
 362
 363 /**
 364  * taskfile_load_raw - send taskfile registers to drive
 365  * @drive: drive to which output is sent
 366  * @gtf: raw ATA taskfile register set (0x1f1 - 0x1f7)
 367  *
 368  * Outputs IDE taskfile to the drive.
 369  */
 370 static int taskfile_load_raw(ide_drive_t *drive,
 371                               const struct taskfile_array *gtf)
 372 {
 373         ide_task_t args;
 374         int err = 0;
 375
 376         DEBPRINT("(0x1f1-1f7): hex: "
 377                "%02x %02x %02x %02x %02x %02x %02x\n",
 378                gtf->tfa[0], gtf->tfa[1], gtf->tfa[2],
 379                gtf->tfa[3], gtf->tfa[4], gtf->tfa[5], gtf->tfa[6]);
 380
 381         memset(&args, 0, sizeof(ide_task_t));
 382
 383         /* convert gtf to IDE Taskfile */
 384         memcpy(&args.tf_array[7], &gtf->tfa, 7);
 385         args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
 386
 387         if (!ide_acpigtf) {
 388                 DEBPRINT("_GTF execution disabled\n");
 389                 return err;
 390         }
 391
 392         err = ide_no_data_taskfile(drive, &args);
 393         if (err)
 394                 printk(KERN_ERR "%s: ide_no_data_taskfile failed: %u\n",
 395                        __func__, err);
 396
 397         return err;
 398 }
 399
 400 /**
 401  * do_drive_set_taskfiles - write the drive taskfile settings from _GTF
 402  * @drive: the drive to which the taskfile command should be sent
 403  * @gtf_length: total number of bytes of _GTF taskfiles
 404  * @gtf_address: location of _GTF taskfile arrays
 405  *
 406  * Write {gtf_address, length gtf_length} in groups of
 407  * REGS_PER_GTF bytes.
 408  */
 409 static int do_drive_set_taskfiles(ide_drive_t *drive,
 410                                   unsigned int gtf_length,
 411                                   unsigned long gtf_address)
 412 {
 413         int                     rc = -ENODEV, err;
 414         int                     gtf_count = gtf_length / REGS_PER_GTF;
 415         int                     ix;
 416         struct taskfile_array   *gtf;
 417
 418         if (ide_noacpi)
 419                 return 0;
 420
 421         DEBPRINT("ENTER: %s, hard_port#: %d\n", drive->name, drive->dn);
 422
 423         if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0)
 424                 goto out;
 425
 426         if (!gtf_count)         /* shouldn't be here */
 427                 goto out;
 428
 429         DEBPRINT("total GTF bytes=%u (0x%x), gtf_count=%d, addr=0x%lx\n",
 430                  gtf_length, gtf_length, gtf_count, gtf_address);
 431
 432         if (gtf_length % REGS_PER_GTF) {
 433                 printk(KERN_ERR "%s: unexpected GTF length (%d)\n",
 434                        __func__, gtf_length);
 435                 goto out;
 436         }
 437
 438         rc = 0;
 439         for (ix = 0; ix < gtf_count; ix++) {
 440                 gtf = (struct taskfile_array *)
 441                         (gtf_address + ix * REGS_PER_GTF);
 442
 443                 /* send all TaskFile registers (0x1f1-0x1f7) *in*that*order* */
 444                 err = taskfile_load_raw(drive, gtf);
 445                 if (err)
 446                         rc = err;
 447         }
 448
 449 out:
 450         return rc;
 451 }
 452
 453 /**
 454  * ide_acpi_exec_tfs - get then write drive taskfile settings
 455  * @drive: the drive for which the taskfile settings should be
 456  *         written.
 457  *
 458  * According to the ACPI spec this should be called after _STM
 459  * has been evaluated for the interface. Some ACPI vendors interpret
 460  * that as a hard requirement and modify the taskfile according
 461  * to the Identify Drive information passed down with _STM.
 462  * So one should really make sure to call this only after _STM has
 463  * been executed.
 464  */
 465 int ide_acpi_exec_tfs(ide_drive_t *drive)
 466 {
 467         int             ret;
 468         unsigned int    gtf_length;
 469         unsigned long   gtf_address;
 470         unsigned long   obj_loc;
 471
 472         if (ide_noacpi)
 473                 return 0;
 474
 475         DEBPRINT("call get_GTF, drive=%s port=%d\n", drive->name, drive->dn);
 476
 477         ret = do_drive_get_GTF(drive, &gtf_length, &gtf_address, &obj_loc);
 478         if (ret < 0) {
 479                 DEBPRINT("get_GTF error (%d)\n", ret);
 480                 return ret;
 481         }
 482
 483         DEBPRINT("call set_taskfiles, drive=%s\n", drive->name);
 484
 485         ret = do_drive_set_taskfiles(drive, gtf_length, gtf_address);
 486         kfree((void *)obj_loc);
 487         if (ret < 0) {
 488                 DEBPRINT("set_taskfiles error (%d)\n", ret);
 489         }
 490
 491         DEBPRINT("ret=%d\n", ret);
 492
 493         return ret;
 494 }
 495
 496 /**
 497  * ide_acpi_get_timing - get the channel (controller) timings
 498  * @hwif: target IDE interface (channel)
 499  *
 500  * This function executes the _GTM ACPI method for the target channel.
 501  *
 502  */
 503 void ide_acpi_get_timing(ide_hwif_t *hwif)
 504 {
 505         acpi_status             status;
 506         struct acpi_buffer      output;
 507         union acpi_object       *out_obj;
 508
 509         if (ide_noacpi)
 510                 return;
 511
 512         DEBPRINT("ENTER:\n");
 513
 514         if (!hwif->acpidata) {
 515                 DEBPRINT("no ACPI data for %s\n", hwif->name);
 516                 return;
 517         }
 518
 519         /* Setting up output buffer for _GTM */
 520         output.length = ACPI_ALLOCATE_BUFFER;
 521         output.pointer = NULL;  /* ACPI-CA sets this; save/free it later */
 522
 523         /* _GTM has no input parameters */
 524         status = acpi_evaluate_object(hwif->acpidata->obj_handle, "_GTM",
 525                                       NULL, &output);
 526
 527         DEBPRINT("_GTM status: %d, outptr: 0x%p, outlen: 0x%llx\n",
 528                  status, output.pointer,
 529                  (unsigned long long)output.length);
 530
 531         if (ACPI_FAILURE(status)) {
 532                 DEBPRINT("Run _GTM error: status = 0x%x\n", status);
 533                 return;
 534         }
 535
 536         if (!output.length || !output.pointer) {
 537                 DEBPRINT("Run _GTM: length or ptr is NULL (0x%llx, 0x%p)\n",
 538                        (unsigned long long)output.length,
 539                        output.pointer);
 540                 kfree(output.pointer);
 541                 return;
 542         }
 543
 544         out_obj = output.pointer;
 545         if (out_obj->type != ACPI_TYPE_BUFFER) {
 546                 kfree(output.pointer);
 547                 DEBPRINT("Run _GTM: error: "
 548                        "expected object type of ACPI_TYPE_BUFFER, "
 549                        "got 0x%x\n", out_obj->type);
 550                 return;
 551         }
 552
 553         if (!out_obj->buffer.length || !out_obj->buffer.pointer ||
 554             out_obj->buffer.length != sizeof(struct GTM_buffer)) {
 555                 kfree(output.pointer);
 556                 printk(KERN_ERR
 557                         "%s: unexpected _GTM length (0x%x)[should be 0x%zx] or "
 558                         "addr (0x%p)\n",
 559                         __func__, out_obj->buffer.length,
 560                         sizeof(struct GTM_buffer), out_obj->buffer.pointer);
 561                 return;
 562         }
 563
 564         memcpy(&hwif->acpidata->gtm, out_obj->buffer.pointer,
 565                sizeof(struct GTM_buffer));
 566
 567         DEBPRINT("_GTM info: ptr: 0x%p, len: 0x%x, exp.len: 0x%Zx\n",
 568                  out_obj->buffer.pointer, out_obj->buffer.length,
 569                  sizeof(struct GTM_buffer));
 570
 571         DEBPRINT("_GTM fields: 0x%x, 0x%x, 0x%x, 0x%x, 0x%x\n",
 572                  hwif->acpidata->gtm.PIO_speed0,
 573                  hwif->acpidata->gtm.DMA_speed0,
 574                  hwif->acpidata->gtm.PIO_speed1,
 575                  hwif->acpidata->gtm.DMA_speed1,
 576                  hwif->acpidata->gtm.GTM_flags);
 577
 578         kfree(output.pointer);
 579 }
 580
 581 /**
 582  * ide_acpi_push_timing - set the channel (controller) timings
 583  * @hwif: target IDE interface (channel)
 584  *
 585  * This function executes the _STM ACPI method for the target channel.
 586  *
 587  * _STM requires Identify Drive data, which has to passed as an argument.
 588  * Unfortunately drive->id is a mangled version which we can't readily
 589  * use; hence we'll get the information afresh.
 590  */
 591 void ide_acpi_push_timing(ide_hwif_t *hwif)
 592 {
 593         acpi_status             status;
 594         struct acpi_object_list input;
 595         union acpi_object       in_params[3];
 596         struct ide_acpi_drive_link      *master = &hwif->acpidata->master;
 597         struct ide_acpi_drive_link      *slave = &hwif->acpidata->slave;
 598
 599         if (ide_noacpi)
 600                 return;
 601
 602         DEBPRINT("ENTER:\n");
 603
 604         if (!hwif->acpidata) {
 605                 DEBPRINT("no ACPI data for %s\n", hwif->name);
 606                 return;
 607         }
 608
 609         /* Give the GTM buffer + drive Identify data to the channel via the
 610          * _STM method: */
 611         /* setup input parameters buffer for _STM */
 612         input.count = 3;
 613         input.pointer = in_params;
 614         in_params[0].type = ACPI_TYPE_BUFFER;
 615         in_params[0].buffer.length = sizeof(struct GTM_buffer);
 616         in_params[0].buffer.pointer = (u8 *)&hwif->acpidata->gtm;
 617         in_params[1].type = ACPI_TYPE_BUFFER;
 618         in_params[1].buffer.length = sizeof(ATA_ID_WORDS * 2);
 619         in_params[1].buffer.pointer = (u8 *)&master->idbuff;
 620         in_params[2].type = ACPI_TYPE_BUFFER;
 621         in_params[2].buffer.length = sizeof(ATA_ID_WORDS * 2);
 622         in_params[2].buffer.pointer = (u8 *)&slave->idbuff;
 623         /* Output buffer: _STM has no output */
 624
 625         status = acpi_evaluate_object(hwif->acpidata->obj_handle, "_STM",
 626                                       &input, NULL);
 627
 628         if (ACPI_FAILURE(status)) {
 629                 DEBPRINT("Run _STM error: status = 0x%x\n", status);
 630         }
 631         DEBPRINT("_STM status: %d\n", status);
 632 }
 633
 634 /**
 635  * ide_acpi_set_state - set the channel power state
 636  * @hwif: target IDE interface
 637  * @on: state, on/off
 638  *
 639  * This function executes the _PS0/_PS3 ACPI method to set the power state.
 640  * ACPI spec requires _PS0 when IDE power on and _PS3 when power off
 641  */
 642 void ide_acpi_set_state(ide_hwif_t *hwif, int on)
 643 {
 644         int unit;
 645
 646         if (ide_noacpi || ide_noacpi_psx)
 647                 return;
 648
 649         DEBPRINT("ENTER:\n");
 650
 651         if (!hwif->acpidata) {
 652                 DEBPRINT("no ACPI data for %s\n", hwif->name);
 653                 return;
 654         }
 655         /* channel first and then drives for power on and verse versa for power off */
 656         if (on)
 657                 acpi_bus_set_power(hwif->acpidata->obj_handle, ACPI_STATE_D0);
 658         for (unit = 0; unit < MAX_DRIVES; ++unit) {
 659                 ide_drive_t *drive = &hwif->drives[unit];
 660
 661                 if (!drive->acpidata->obj_handle)
 662                         drive->acpidata->obj_handle = ide_acpi_drive_get_handle(drive);
 663
 664                 if (drive->acpidata->obj_handle &&
 665                     (drive->dev_flags & IDE_DFLAG_PRESENT)) {
 666                         acpi_bus_set_power(drive->acpidata->obj_handle,
 667                                 on? ACPI_STATE_D0: ACPI_STATE_D3);
 668                 }
 669         }
 670         if (!on)
 671                 acpi_bus_set_power(hwif->acpidata->obj_handle, ACPI_STATE_D3);
 672 }
 673
 674 /**
 675  * ide_acpi_init - initialize the ACPI link for an IDE interface
 676  * @hwif: target IDE interface (channel)
 677  *
 678  * The ACPI spec is not quite clear when the drive identify buffer
 679  * should be obtained. Calling IDENTIFY DEVICE during shutdown
 680  * is not the best of ideas as the drive might already being put to
 681  * sleep. And obviously we can't call it during resume.
 682  * So we get the information during startup; but this means that
 683  * any changes during run-time will be lost after resume.
 684  */
 685 void ide_acpi_init(ide_hwif_t *hwif)
 686 {
 687         ide_acpi_blacklist();
 688
 689         hwif->acpidata = kzalloc(sizeof(struct ide_acpi_hwif_link), GFP_KERNEL);
 690         if (!hwif->acpidata)
 691                 return;
 692
 693         hwif->acpidata->obj_handle = ide_acpi_hwif_get_handle(hwif);
 694         if (!hwif->acpidata->obj_handle) {
 695                 DEBPRINT("no ACPI object for %s found\n", hwif->name);
 696                 kfree(hwif->acpidata);
 697                 hwif->acpidata = NULL;
 698         }
 699 }
 700
 701 void ide_acpi_port_init_devices(ide_hwif_t *hwif)
 702 {
 703         ide_drive_t *drive;
 704         int i, err;
 705
 706         if (hwif->acpidata == NULL)
 707                 return;
 708
 709         /*
 710          * The ACPI spec mandates that we send information
 711          * for both drives, regardless whether they are connected
 712          * or not.
 713          */
 714         hwif->drives[0].acpidata = &hwif->acpidata->master;
 715         hwif->drives[1].acpidata = &hwif->acpidata->slave;
 716
 717         /*
 718          * Send IDENTIFY for each drive
 719          */
 720         for (i = 0; i < MAX_DRIVES; i++) {
 721                 drive = &hwif->drives[i];
 722
 723                 memset(drive->acpidata, 0, sizeof(*drive->acpidata));
 724
 725                 if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0)
 726                         continue;
 727
 728                 err = taskfile_lib_get_identify(drive, drive->acpidata->idbuff);
 729                 if (err)
 730                         DEBPRINT("identify device %s failed (%d)\n",
 731                                  drive->name, err);
 732         }
 733
 734         if (!ide_acpionboot) {
 735                 DEBPRINT("ACPI methods disabled on boot\n");
 736                 return;
 737         }
 738
 739         /* ACPI _PS0 before _STM */
 740         ide_acpi_set_state(hwif, 1);
 741         /*
 742          * ACPI requires us to call _STM on startup
 743          */
 744         ide_acpi_get_timing(hwif);
 745         ide_acpi_push_timing(hwif);
 746
 747         for (i = 0; i < MAX_DRIVES; i++) {
 748                 drive = &hwif->drives[i];
 749
 750                 if (drive->dev_flags & IDE_DFLAG_PRESENT)
 751                         /* Execute ACPI startup code */
 752                         ide_acpi_exec_tfs(drive);
 753         }
 754 }