git.oblomov.eu Git - linux-2.6/blob - drivers/net/saa9730.c

   1 /*
   2  * Copyright (C) 2000, 2005  MIPS Technologies, Inc.  All rights reserved.
   3  *      Authors: Carsten Langgaard <carstenl@mips.com>
   4  *               Maciej W. Rozycki <macro@mips.com>
   5  * Copyright (C) 2004 Ralf Baechle <ralf@linux-mips.org>
   6  *
   7  *  This program is free software; you can distribute it and/or modify it
   8  *  under the terms of the GNU General Public License (Version 2) as
   9  *  published by the Free Software Foundation.
  10  *
  11  *  This program is distributed in the hope it will be useful, but WITHOUT
  12  *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  13  *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  14  *  for more details.
  15  *
  16  *  You should have received a copy of the GNU General Public License along
  17  *  with this program; if not, write to the Free Software Foundation, Inc.,
  18  *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
  19  *
  20  * SAA9730 ethernet driver.
  21  *
  22  * Changes:
  23  * Angelo Dell'Aera <buffer@antifork.org> :     Conversion to the new PCI API
  24  *                                              (pci_driver).
  25  *                                              Conversion to spinlocks.
  26  *                                              Error handling fixes.
  27  */
  28
  29 #include <linux/init.h>
  30 #include <linux/netdevice.h>
  31 #include <linux/delay.h>
  32 #include <linux/etherdevice.h>
  33 #include <linux/module.h>
  34 #include <linux/skbuff.h>
  35 #include <linux/pci.h>
  36 #include <linux/spinlock.h>
  37 #include <linux/types.h>
  38
  39 #include <asm/addrspace.h>
  40 #include <asm/io.h>
  41
  42 #include <asm/mips-boards/prom.h>
  43
  44 #include "saa9730.h"
  45
  46 #ifdef LAN_SAA9730_DEBUG
  47 int lan_saa9730_debug = LAN_SAA9730_DEBUG;
  48 #else
  49 int lan_saa9730_debug;
  50 #endif
  51
  52 #define DRV_MODULE_NAME "saa9730"
  53
  54 static struct pci_device_id saa9730_pci_tbl[] = {
  55         { PCI_VENDOR_ID_PHILIPS, PCI_DEVICE_ID_PHILIPS_SAA9730,
  56           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
  57         { 0, }
  58 };
  59
  60 MODULE_DEVICE_TABLE(pci, saa9730_pci_tbl);
  61
  62 /* Non-zero only if the current card is a PCI with BIOS-set IRQ. */
  63 static unsigned int pci_irq_line;
  64
  65 static void evm_saa9730_enable_lan_int(struct lan_saa9730_private *lp)
  66 {
  67         writel(readl(&lp->evm_saa9730_regs->InterruptBlock1) | EVM_LAN_INT,
  68                &lp->evm_saa9730_regs->InterruptBlock1);
  69         writel(readl(&lp->evm_saa9730_regs->InterruptStatus1) | EVM_LAN_INT,
  70                &lp->evm_saa9730_regs->InterruptStatus1);
  71         writel(readl(&lp->evm_saa9730_regs->InterruptEnable1) | EVM_LAN_INT |
  72                EVM_MASTER_EN, &lp->evm_saa9730_regs->InterruptEnable1);
  73 }
  74
  75 static void evm_saa9730_disable_lan_int(struct lan_saa9730_private *lp)
  76 {
  77         writel(readl(&lp->evm_saa9730_regs->InterruptBlock1) & ~EVM_LAN_INT,
  78                &lp->evm_saa9730_regs->InterruptBlock1);
  79         writel(readl(&lp->evm_saa9730_regs->InterruptEnable1) & ~EVM_LAN_INT,
  80                &lp->evm_saa9730_regs->InterruptEnable1);
  81 }
  82
  83 static void evm_saa9730_clear_lan_int(struct lan_saa9730_private *lp)
  84 {
  85         writel(EVM_LAN_INT, &lp->evm_saa9730_regs->InterruptStatus1);
  86 }
  87
  88 static void evm_saa9730_block_lan_int(struct lan_saa9730_private *lp)
  89 {
  90         writel(readl(&lp->evm_saa9730_regs->InterruptBlock1) & ~EVM_LAN_INT,
  91                &lp->evm_saa9730_regs->InterruptBlock1);
  92 }
  93
  94 static void evm_saa9730_unblock_lan_int(struct lan_saa9730_private *lp)
  95 {
  96         writel(readl(&lp->evm_saa9730_regs->InterruptBlock1) | EVM_LAN_INT,
  97                &lp->evm_saa9730_regs->InterruptBlock1);
  98 }
  99
 100 static void __used show_saa9730_regs(struct net_device *dev)
 101 {
 102         struct lan_saa9730_private *lp = netdev_priv(dev);
 103         int i, j;
 104
 105         printk("TxmBufferA = %p\n", lp->TxmBuffer[0][0]);
 106         printk("TxmBufferB = %p\n", lp->TxmBuffer[1][0]);
 107         printk("RcvBufferA = %p\n", lp->RcvBuffer[0][0]);
 108         printk("RcvBufferB = %p\n", lp->RcvBuffer[1][0]);
 109
 110         for (i = 0; i < LAN_SAA9730_BUFFERS; i++) {
 111                 for (j = 0; j < LAN_SAA9730_TXM_Q_SIZE; j++) {
 112                         printk("TxmBuffer[%d][%d] = %x\n", i, j,
 113                                le32_to_cpu(*(unsigned int *)
 114                                            lp->TxmBuffer[i][j]));
 115                 }
 116         }
 117         for (i = 0; i < LAN_SAA9730_BUFFERS; i++) {
 118                 for (j = 0; j < LAN_SAA9730_RCV_Q_SIZE; j++) {
 119                         printk("RcvBuffer[%d][%d] = %x\n", i, j,
 120                                le32_to_cpu(*(unsigned int *)
 121                                            lp->RcvBuffer[i][j]));
 122                 }
 123         }
 124         printk("lp->evm_saa9730_regs->InterruptBlock1 = %x\n",
 125                readl(&lp->evm_saa9730_regs->InterruptBlock1));
 126         printk("lp->evm_saa9730_regs->InterruptStatus1 = %x\n",
 127                readl(&lp->evm_saa9730_regs->InterruptStatus1));
 128         printk("lp->evm_saa9730_regs->InterruptEnable1 = %x\n",
 129                readl(&lp->evm_saa9730_regs->InterruptEnable1));
 130         printk("lp->lan_saa9730_regs->Ok2Use = %x\n",
 131                readl(&lp->lan_saa9730_regs->Ok2Use));
 132         printk("lp->NextTxmBufferIndex = %x\n", lp->NextTxmBufferIndex);
 133         printk("lp->NextTxmPacketIndex = %x\n", lp->NextTxmPacketIndex);
 134         printk("lp->PendingTxmBufferIndex = %x\n",
 135                lp->PendingTxmBufferIndex);
 136         printk("lp->PendingTxmPacketIndex = %x\n",
 137                lp->PendingTxmPacketIndex);
 138         printk("lp->lan_saa9730_regs->LanDmaCtl = %x\n",
 139                readl(&lp->lan_saa9730_regs->LanDmaCtl));
 140         printk("lp->lan_saa9730_regs->DmaStatus = %x\n",
 141                readl(&lp->lan_saa9730_regs->DmaStatus));
 142         printk("lp->lan_saa9730_regs->CamCtl = %x\n",
 143                readl(&lp->lan_saa9730_regs->CamCtl));
 144         printk("lp->lan_saa9730_regs->TxCtl = %x\n",
 145                readl(&lp->lan_saa9730_regs->TxCtl));
 146         printk("lp->lan_saa9730_regs->TxStatus = %x\n",
 147                readl(&lp->lan_saa9730_regs->TxStatus));
 148         printk("lp->lan_saa9730_regs->RxCtl = %x\n",
 149                readl(&lp->lan_saa9730_regs->RxCtl));
 150         printk("lp->lan_saa9730_regs->RxStatus = %x\n",
 151                readl(&lp->lan_saa9730_regs->RxStatus));
 152
 153         for (i = 0; i < LAN_SAA9730_CAM_DWORDS; i++) {
 154                 writel(i, &lp->lan_saa9730_regs->CamAddress);
 155                 printk("lp->lan_saa9730_regs->CamData = %x\n",
 156                        readl(&lp->lan_saa9730_regs->CamData));
 157         }
 158
 159         printk("dev->stats.tx_packets = %lx\n", dev->stats.tx_packets);
 160         printk("dev->stats.tx_errors = %lx\n", dev->stats.tx_errors);
 161         printk("dev->stats.tx_aborted_errors = %lx\n",
 162                dev->stats.tx_aborted_errors);
 163         printk("dev->stats.tx_window_errors = %lx\n",
 164                dev->stats.tx_window_errors);
 165         printk("dev->stats.tx_carrier_errors = %lx\n",
 166                dev->stats.tx_carrier_errors);
 167         printk("dev->stats.tx_fifo_errors = %lx\n",
 168                dev->stats.tx_fifo_errors);
 169         printk("dev->stats.tx_heartbeat_errors = %lx\n",
 170                dev->stats.tx_heartbeat_errors);
 171         printk("dev->stats.collisions = %lx\n", dev->stats.collisions);
 172
 173         printk("dev->stats.rx_packets = %lx\n", dev->stats.rx_packets);
 174         printk("dev->stats.rx_errors = %lx\n", dev->stats.rx_errors);
 175         printk("dev->stats.rx_dropped = %lx\n", dev->stats.rx_dropped);
 176         printk("dev->stats.rx_crc_errors = %lx\n", dev->stats.rx_crc_errors);
 177         printk("dev->stats.rx_frame_errors = %lx\n",
 178                dev->stats.rx_frame_errors);
 179         printk("dev->stats.rx_fifo_errors = %lx\n",
 180                dev->stats.rx_fifo_errors);
 181         printk("dev->stats.rx_length_errors = %lx\n",
 182                dev->stats.rx_length_errors);
 183
 184         printk("lp->lan_saa9730_regs->DebugPCIMasterAddr = %x\n",
 185                readl(&lp->lan_saa9730_regs->DebugPCIMasterAddr));
 186         printk("lp->lan_saa9730_regs->DebugLanTxStateMachine = %x\n",
 187                readl(&lp->lan_saa9730_regs->DebugLanTxStateMachine));
 188         printk("lp->lan_saa9730_regs->DebugLanRxStateMachine = %x\n",
 189                readl(&lp->lan_saa9730_regs->DebugLanRxStateMachine));
 190         printk("lp->lan_saa9730_regs->DebugLanTxFifoPointers = %x\n",
 191                readl(&lp->lan_saa9730_regs->DebugLanTxFifoPointers));
 192         printk("lp->lan_saa9730_regs->DebugLanRxFifoPointers = %x\n",
 193                readl(&lp->lan_saa9730_regs->DebugLanRxFifoPointers));
 194         printk("lp->lan_saa9730_regs->DebugLanCtlStateMachine = %x\n",
 195                readl(&lp->lan_saa9730_regs->DebugLanCtlStateMachine));
 196 }
 197
 198 static void lan_saa9730_buffer_init(struct lan_saa9730_private *lp)
 199 {
 200         int i, j;
 201
 202         /* Init RX buffers */
 203         for (i = 0; i < LAN_SAA9730_BUFFERS; i++) {
 204                 for (j = 0; j < LAN_SAA9730_RCV_Q_SIZE; j++) {
 205                         *(unsigned int *) lp->RcvBuffer[i][j] =
 206                             cpu_to_le32(RXSF_READY <<
 207                                         RX_STAT_CTL_OWNER_SHF);
 208                 }
 209         }
 210
 211         /* Init TX buffers */
 212         for (i = 0; i < LAN_SAA9730_BUFFERS; i++) {
 213                 for (j = 0; j < LAN_SAA9730_TXM_Q_SIZE; j++) {
 214                         *(unsigned int *) lp->TxmBuffer[i][j] =
 215                             cpu_to_le32(TXSF_EMPTY <<
 216                                         TX_STAT_CTL_OWNER_SHF);
 217                 }
 218         }
 219 }
 220
 221 static void lan_saa9730_free_buffers(struct pci_dev *pdev,
 222                                      struct lan_saa9730_private *lp)
 223 {
 224         pci_free_consistent(pdev, lp->buffer_size, lp->buffer_start,
 225                             lp->dma_addr);
 226 }
 227
 228 static int lan_saa9730_allocate_buffers(struct pci_dev *pdev,
 229                                         struct lan_saa9730_private *lp)
 230 {
 231         void *Pa;
 232         unsigned int i, j, rxoffset, txoffset;
 233         int ret;
 234
 235         /* Initialize buffer space */
 236         lp->DmaRcvPackets = LAN_SAA9730_RCV_Q_SIZE;
 237         lp->DmaTxmPackets = LAN_SAA9730_TXM_Q_SIZE;
 238
 239         /* Initialize Rx Buffer Index */
 240         lp->NextRcvPacketIndex = 0;
 241         lp->NextRcvBufferIndex = 0;
 242
 243         /* Set current buffer index & next available packet index */
 244         lp->NextTxmPacketIndex = 0;
 245         lp->NextTxmBufferIndex = 0;
 246         lp->PendingTxmPacketIndex = 0;
 247         lp->PendingTxmBufferIndex = 0;
 248
 249         /*
 250          * Allocate all RX and TX packets in one chunk.
 251          * The Rx and Tx packets must be PACKET_SIZE aligned.
 252          */
 253         lp->buffer_size = ((LAN_SAA9730_RCV_Q_SIZE + LAN_SAA9730_TXM_Q_SIZE) *
 254                            LAN_SAA9730_PACKET_SIZE * LAN_SAA9730_BUFFERS) +
 255                           LAN_SAA9730_PACKET_SIZE;
 256         lp->buffer_start = pci_alloc_consistent(pdev, lp->buffer_size,
 257                                                 &lp->dma_addr);
 258         if (!lp->buffer_start) {
 259                 ret = -ENOMEM;
 260                 goto out;
 261         }
 262
 263         Pa = (void *)ALIGN((unsigned long)lp->buffer_start,
 264                            LAN_SAA9730_PACKET_SIZE);
 265
 266         rxoffset = Pa - lp->buffer_start;
 267
 268         /* Init RX buffers */
 269         for (i = 0; i < LAN_SAA9730_BUFFERS; i++) {
 270                 for (j = 0; j < LAN_SAA9730_RCV_Q_SIZE; j++) {
 271                         *(unsigned int *) Pa =
 272                             cpu_to_le32(RXSF_READY <<
 273                                         RX_STAT_CTL_OWNER_SHF);
 274                         lp->RcvBuffer[i][j] = Pa;
 275                         Pa += LAN_SAA9730_PACKET_SIZE;
 276                 }
 277         }
 278
 279         txoffset = Pa - lp->buffer_start;
 280
 281         /* Init TX buffers */
 282         for (i = 0; i < LAN_SAA9730_BUFFERS; i++) {
 283                 for (j = 0; j < LAN_SAA9730_TXM_Q_SIZE; j++) {
 284                         *(unsigned int *) Pa =
 285                             cpu_to_le32(TXSF_EMPTY <<
 286                                         TX_STAT_CTL_OWNER_SHF);
 287                         lp->TxmBuffer[i][j] = Pa;
 288                         Pa += LAN_SAA9730_PACKET_SIZE;
 289                 }
 290         }
 291
 292         /*
 293          * Set rx buffer A and rx buffer B to point to the first two buffer
 294          * spaces.
 295          */
 296         writel(lp->dma_addr + rxoffset, &lp->lan_saa9730_regs->RxBuffA);
 297         writel(lp->dma_addr + rxoffset +
 298                LAN_SAA9730_PACKET_SIZE * LAN_SAA9730_RCV_Q_SIZE,
 299                &lp->lan_saa9730_regs->RxBuffB);
 300
 301         /*
 302          * Set txm_buf_a and txm_buf_b to point to the first two buffer
 303          * space
 304          */
 305         writel(lp->dma_addr + txoffset,
 306                &lp->lan_saa9730_regs->TxBuffA);
 307         writel(lp->dma_addr + txoffset +
 308                LAN_SAA9730_PACKET_SIZE * LAN_SAA9730_TXM_Q_SIZE,
 309                &lp->lan_saa9730_regs->TxBuffB);
 310
 311         /* Set packet number */
 312         writel((lp->DmaRcvPackets << PK_COUNT_RX_A_SHF) |
 313                (lp->DmaRcvPackets << PK_COUNT_RX_B_SHF) |
 314                (lp->DmaTxmPackets << PK_COUNT_TX_A_SHF) |
 315                (lp->DmaTxmPackets << PK_COUNT_TX_B_SHF),
 316                &lp->lan_saa9730_regs->PacketCount);
 317
 318         return 0;
 319
 320 out:
 321         return ret;
 322 }
 323
 324 static int lan_saa9730_cam_load(struct lan_saa9730_private *lp)
 325 {
 326         unsigned int i;
 327         unsigned char *NetworkAddress;
 328
 329         NetworkAddress = (unsigned char *) &lp->PhysicalAddress[0][0];
 330
 331         for (i = 0; i < LAN_SAA9730_CAM_DWORDS; i++) {
 332                 /* First set address to where data is written */
 333                 writel(i, &lp->lan_saa9730_regs->CamAddress);
 334                 writel((NetworkAddress[0] << 24) | (NetworkAddress[1] << 16) |
 335                        (NetworkAddress[2] << 8) | NetworkAddress[3],
 336                        &lp->lan_saa9730_regs->CamData);
 337                 NetworkAddress += 4;
 338         }
 339         return 0;
 340 }
 341
 342 static int lan_saa9730_cam_init(struct net_device *dev)
 343 {
 344         struct lan_saa9730_private *lp = netdev_priv(dev);
 345         unsigned int i;
 346
 347         /* Copy MAC-address into all entries. */
 348         for (i = 0; i < LAN_SAA9730_CAM_ENTRIES; i++) {
 349                 memcpy((unsigned char *) lp->PhysicalAddress[i],
 350                        (unsigned char *) dev->dev_addr, 6);
 351         }
 352
 353         return 0;
 354 }
 355
 356 static int lan_saa9730_mii_init(struct lan_saa9730_private *lp)
 357 {
 358         int i, l;
 359
 360         /* Check link status, spin here till station is not busy. */
 361         i = 0;
 362         while (readl(&lp->lan_saa9730_regs->StationMgmtCtl) & MD_CA_BUSY) {
 363                 i++;
 364                 if (i > 100) {
 365                         printk("Error: lan_saa9730_mii_init: timeout\n");
 366                         return -1;
 367                 }
 368                 mdelay(1);      /* wait 1 ms. */
 369         }
 370
 371         /* Now set the control and address register. */
 372         writel(MD_CA_BUSY | PHY_STATUS | PHY_ADDRESS << MD_CA_PHY_SHF,
 373                &lp->lan_saa9730_regs->StationMgmtCtl);
 374
 375         /* check link status, spin here till station is not busy */
 376         i = 0;
 377         while (readl(&lp->lan_saa9730_regs->StationMgmtCtl) & MD_CA_BUSY) {
 378                 i++;
 379                 if (i > 100) {
 380                         printk("Error: lan_saa9730_mii_init: timeout\n");
 381                         return -1;
 382                 }
 383                 mdelay(1);      /* wait 1 ms. */
 384         }
 385
 386         /* Wait for 1 ms. */
 387         mdelay(1);
 388
 389         /* Check the link status. */
 390         if (readl(&lp->lan_saa9730_regs->StationMgmtData) &
 391             PHY_STATUS_LINK_UP) {
 392                 /* Link is up. */
 393                 return 0;
 394         } else {
 395                 /* Link is down, reset the PHY first. */
 396
 397                 /* set PHY address = 'CONTROL' */
 398                 writel(PHY_ADDRESS << MD_CA_PHY_SHF | MD_CA_WR | PHY_CONTROL,
 399                        &lp->lan_saa9730_regs->StationMgmtCtl);
 400
 401                 /* Wait for 1 ms. */
 402                 mdelay(1);
 403
 404                 /* set 'CONTROL' = force reset and renegotiate */
 405                 writel(PHY_CONTROL_RESET | PHY_CONTROL_AUTO_NEG |
 406                        PHY_CONTROL_RESTART_AUTO_NEG,
 407                        &lp->lan_saa9730_regs->StationMgmtData);
 408
 409                 /* Wait for 50 ms. */
 410                 mdelay(50);
 411
 412                 /* set 'BUSY' to start operation */
 413                 writel(MD_CA_BUSY | PHY_ADDRESS << MD_CA_PHY_SHF | MD_CA_WR |
 414                        PHY_CONTROL, &lp->lan_saa9730_regs->StationMgmtCtl);
 415
 416                 /* await completion */
 417                 i = 0;
 418                 while (readl(&lp->lan_saa9730_regs->StationMgmtCtl) &
 419                        MD_CA_BUSY) {
 420                         i++;
 421                         if (i > 100) {
 422                                 printk
 423                                     ("Error: lan_saa9730_mii_init: timeout\n");
 424                                 return -1;
 425                         }
 426                         mdelay(1);      /* wait 1 ms. */
 427                 }
 428
 429                 /* Wait for 1 ms. */
 430                 mdelay(1);
 431
 432                 for (l = 0; l < 2; l++) {
 433                         /* set PHY address = 'STATUS' */
 434                         writel(MD_CA_BUSY | PHY_ADDRESS << MD_CA_PHY_SHF |
 435                                PHY_STATUS,
 436                                &lp->lan_saa9730_regs->StationMgmtCtl);
 437
 438                         /* await completion */
 439                         i = 0;
 440                         while (readl(&lp->lan_saa9730_regs->StationMgmtCtl) &
 441                                MD_CA_BUSY) {
 442                                 i++;
 443                                 if (i > 100) {
 444                                         printk
 445                                             ("Error: lan_saa9730_mii_init: timeout\n");
 446                                         return -1;
 447                                 }
 448                                 mdelay(1);      /* wait 1 ms. */
 449                         }
 450
 451                         /* wait for 3 sec. */
 452                         mdelay(3000);
 453
 454                         /* check the link status */
 455                         if (readl(&lp->lan_saa9730_regs->StationMgmtData) &
 456                             PHY_STATUS_LINK_UP) {
 457                                 /* link is up */
 458                                 break;
 459                         }
 460                 }
 461         }
 462
 463         return 0;
 464 }
 465
 466 static int lan_saa9730_control_init(struct lan_saa9730_private *lp)
 467 {
 468         /* Initialize DMA control register. */
 469         writel((LANMB_ANY << DMA_CTL_MAX_XFER_SHF) |
 470                (LANEND_LITTLE << DMA_CTL_ENDIAN_SHF) |
 471                (LAN_SAA9730_RCV_Q_INT_THRESHOLD << DMA_CTL_RX_INT_COUNT_SHF)
 472                | DMA_CTL_RX_INT_TO_EN | DMA_CTL_RX_INT_EN |
 473                DMA_CTL_MAC_RX_INT_EN | DMA_CTL_MAC_TX_INT_EN,
 474                &lp->lan_saa9730_regs->LanDmaCtl);
 475
 476         /* Initial MAC control register. */
 477         writel((MACCM_MII << MAC_CONTROL_CONN_SHF) | MAC_CONTROL_FULL_DUP,
 478                &lp->lan_saa9730_regs->MacCtl);
 479
 480         /* Initialize CAM control register. */
 481         writel(CAM_CONTROL_COMP_EN | CAM_CONTROL_BROAD_ACC,
 482                &lp->lan_saa9730_regs->CamCtl);
 483
 484         /*
 485          * Initialize CAM enable register, only turn on first entry, should
 486          * contain own addr.
 487          */
 488         writel(0x0001, &lp->lan_saa9730_regs->CamEnable);
 489
 490         /* Initialize Tx control register */
 491         writel(TX_CTL_EN_COMP, &lp->lan_saa9730_regs->TxCtl);
 492
 493         /* Initialize Rcv control register */
 494         writel(RX_CTL_STRIP_CRC, &lp->lan_saa9730_regs->RxCtl);
 495
 496         /* Reset DMA engine */
 497         writel(DMA_TEST_SW_RESET, &lp->lan_saa9730_regs->DmaTest);
 498
 499         return 0;
 500 }
 501
 502 static int lan_saa9730_stop(struct lan_saa9730_private *lp)
 503 {
 504         int i;
 505
 506         /* Stop DMA first */
 507         writel(readl(&lp->lan_saa9730_regs->LanDmaCtl) &
 508                ~(DMA_CTL_EN_TX_DMA | DMA_CTL_EN_RX_DMA),
 509                &lp->lan_saa9730_regs->LanDmaCtl);
 510
 511         /* Set the SW Reset bits in DMA and MAC control registers */
 512         writel(DMA_TEST_SW_RESET, &lp->lan_saa9730_regs->DmaTest);
 513         writel(readl(&lp->lan_saa9730_regs->MacCtl) | MAC_CONTROL_RESET,
 514                &lp->lan_saa9730_regs->MacCtl);
 515
 516         /*
 517          * Wait for MAC reset to have finished. The reset bit is auto cleared
 518          * when the reset is done.
 519          */
 520         i = 0;
 521         while (readl(&lp->lan_saa9730_regs->MacCtl) & MAC_CONTROL_RESET) {
 522                 i++;
 523                 if (i > 100) {
 524                         printk
 525                             ("Error: lan_sa9730_stop: MAC reset timeout\n");
 526                         return -1;
 527                 }
 528                 mdelay(1);      /* wait 1 ms. */
 529         }
 530
 531         return 0;
 532 }
 533
 534 static int lan_saa9730_dma_init(struct lan_saa9730_private *lp)
 535 {
 536         /* Stop lan controller. */
 537         lan_saa9730_stop(lp);
 538
 539         writel(LAN_SAA9730_DEFAULT_TIME_OUT_CNT,
 540                &lp->lan_saa9730_regs->Timeout);
 541
 542         return 0;
 543 }
 544
 545 static int lan_saa9730_start(struct lan_saa9730_private *lp)
 546 {
 547         lan_saa9730_buffer_init(lp);
 548
 549         /* Initialize Rx Buffer Index */
 550         lp->NextRcvPacketIndex = 0;
 551         lp->NextRcvBufferIndex = 0;
 552
 553         /* Set current buffer index & next available packet index */
 554         lp->NextTxmPacketIndex = 0;
 555         lp->NextTxmBufferIndex = 0;
 556         lp->PendingTxmPacketIndex = 0;
 557         lp->PendingTxmBufferIndex = 0;
 558
 559         writel(readl(&lp->lan_saa9730_regs->LanDmaCtl) | DMA_CTL_EN_TX_DMA |
 560                DMA_CTL_EN_RX_DMA, &lp->lan_saa9730_regs->LanDmaCtl);
 561
 562         /* For Tx, turn on MAC then DMA */
 563         writel(readl(&lp->lan_saa9730_regs->TxCtl) | TX_CTL_TX_EN,
 564                &lp->lan_saa9730_regs->TxCtl);
 565
 566         /* For Rx, turn on DMA then MAC */
 567         writel(readl(&lp->lan_saa9730_regs->RxCtl) | RX_CTL_RX_EN,
 568                &lp->lan_saa9730_regs->RxCtl);
 569
 570         /* Set Ok2Use to let hardware own the buffers.  */
 571         writel(OK2USE_RX_A | OK2USE_RX_B, &lp->lan_saa9730_regs->Ok2Use);
 572
 573         return 0;
 574 }
 575
 576 static int lan_saa9730_restart(struct lan_saa9730_private *lp)
 577 {
 578         lan_saa9730_stop(lp);
 579         lan_saa9730_start(lp);
 580
 581         return 0;
 582 }
 583
 584 static int lan_saa9730_tx(struct net_device *dev)
 585 {
 586         struct lan_saa9730_private *lp = netdev_priv(dev);
 587         unsigned int *pPacket;
 588         unsigned int tx_status;
 589
 590         if (lan_saa9730_debug > 5)
 591                 printk("lan_saa9730_tx interrupt\n");
 592
 593         /* Clear interrupt. */
 594         writel(DMA_STATUS_MAC_TX_INT, &lp->lan_saa9730_regs->DmaStatus);
 595
 596         while (1) {
 597                 pPacket = lp->TxmBuffer[lp->PendingTxmBufferIndex]
 598                                        [lp->PendingTxmPacketIndex];
 599
 600                 /* Get status of first packet transmitted. */
 601                 tx_status = le32_to_cpu(*pPacket);
 602
 603                 /* Check ownership. */
 604                 if ((tx_status & TX_STAT_CTL_OWNER_MSK) !=
 605                     (TXSF_HWDONE << TX_STAT_CTL_OWNER_SHF)) break;
 606
 607                 /* Check for error. */
 608                 if (tx_status & TX_STAT_CTL_ERROR_MSK) {
 609                         if (lan_saa9730_debug > 1)
 610                                 printk("lan_saa9730_tx: tx error = %x\n",
 611                                        tx_status);
 612
 613                         dev->stats.tx_errors++;
 614                         if (tx_status &
 615                             (TX_STATUS_EX_COLL << TX_STAT_CTL_STATUS_SHF))
 616                                 dev->stats.tx_aborted_errors++;
 617                         if (tx_status &
 618                             (TX_STATUS_LATE_COLL << TX_STAT_CTL_STATUS_SHF))
 619                                 dev->stats.tx_window_errors++;
 620                         if (tx_status &
 621                             (TX_STATUS_L_CARR << TX_STAT_CTL_STATUS_SHF))
 622                                 dev->stats.tx_carrier_errors++;
 623                         if (tx_status &
 624                             (TX_STATUS_UNDER << TX_STAT_CTL_STATUS_SHF))
 625                                 dev->stats.tx_fifo_errors++;
 626                         if (tx_status &
 627                             (TX_STATUS_SQ_ERR << TX_STAT_CTL_STATUS_SHF))
 628                                 dev->stats.tx_heartbeat_errors++;
 629
 630                         dev->stats.collisions +=
 631                                 tx_status & TX_STATUS_TX_COLL_MSK;
 632                 }
 633
 634                 /* Free buffer. */
 635                 *pPacket =
 636                     cpu_to_le32(TXSF_EMPTY << TX_STAT_CTL_OWNER_SHF);
 637
 638                 /* Update pending index pointer. */
 639                 lp->PendingTxmPacketIndex++;
 640                 if (lp->PendingTxmPacketIndex >= LAN_SAA9730_TXM_Q_SIZE) {
 641                         lp->PendingTxmPacketIndex = 0;
 642                         lp->PendingTxmBufferIndex ^= 1;
 643                 }
 644         }
 645
 646         /* The tx buffer is no longer full. */
 647         netif_wake_queue(dev);
 648
 649         return 0;
 650 }
 651
 652 static int lan_saa9730_rx(struct net_device *dev)
 653 {
 654         struct lan_saa9730_private *lp = netdev_priv(dev);
 655         int len = 0;
 656         struct sk_buff *skb = 0;
 657         unsigned int rx_status;
 658         int BufferIndex;
 659         int PacketIndex;
 660         unsigned int *pPacket;
 661         unsigned char *pData;
 662
 663         if (lan_saa9730_debug > 5)
 664                 printk("lan_saa9730_rx interrupt\n");
 665
 666         /* Clear receive interrupts. */
 667         writel(DMA_STATUS_MAC_RX_INT | DMA_STATUS_RX_INT |
 668                DMA_STATUS_RX_TO_INT, &lp->lan_saa9730_regs->DmaStatus);
 669
 670         /* Address next packet */
 671         BufferIndex = lp->NextRcvBufferIndex;
 672         PacketIndex = lp->NextRcvPacketIndex;
 673         pPacket = lp->RcvBuffer[BufferIndex][PacketIndex];
 674         rx_status = le32_to_cpu(*pPacket);
 675
 676         /* Process each packet. */
 677         while ((rx_status & RX_STAT_CTL_OWNER_MSK) ==
 678                (RXSF_HWDONE << RX_STAT_CTL_OWNER_SHF)) {
 679                 /* Check the rx status. */
 680                 if (rx_status & (RX_STATUS_GOOD << RX_STAT_CTL_STATUS_SHF)) {
 681                         /* Received packet is good. */
 682                         len = (rx_status & RX_STAT_CTL_LENGTH_MSK) >>
 683                             RX_STAT_CTL_LENGTH_SHF;
 684
 685                         pData = (unsigned char *) pPacket;
 686                         pData += 4;
 687                         skb = dev_alloc_skb(len + 2);
 688                         if (skb == 0) {
 689                                 printk
 690                                     ("%s: Memory squeeze, deferring packet.\n",
 691                                      dev->name);
 692                                 dev->stats.rx_dropped++;
 693                         } else {
 694                                 dev->stats.rx_bytes += len;
 695                                 dev->stats.rx_packets++;
 696                                 skb_reserve(skb, 2);    /* 16 byte align */
 697                                 skb_put(skb, len);      /* make room */
 698                                 skb_copy_to_linear_data(skb,
 699                                                  (unsigned char *) pData,
 700                                                  len);
 701                                 skb->protocol = eth_type_trans(skb, dev);
 702                                 netif_rx(skb);
 703                                 dev->last_rx = jiffies;
 704                         }
 705                 } else {
 706                         /* We got an error packet. */
 707                         if (lan_saa9730_debug > 2)
 708                                 printk
 709                                     ("lan_saa9730_rx: We got an error packet = %x\n",
 710                                      rx_status);
 711
 712                         dev->stats.rx_errors++;
 713                         if (rx_status &
 714                             (RX_STATUS_CRC_ERR << RX_STAT_CTL_STATUS_SHF))
 715                                 dev->stats.rx_crc_errors++;
 716                         if (rx_status &
 717                             (RX_STATUS_ALIGN_ERR << RX_STAT_CTL_STATUS_SHF))
 718                                 dev->stats.rx_frame_errors++;
 719                         if (rx_status &
 720                             (RX_STATUS_OVERFLOW << RX_STAT_CTL_STATUS_SHF))
 721                                 dev->stats.rx_fifo_errors++;
 722                         if (rx_status &
 723                             (RX_STATUS_LONG_ERR << RX_STAT_CTL_STATUS_SHF))
 724                                 dev->stats.rx_length_errors++;
 725                 }
 726
 727                 /* Indicate we have processed the buffer. */
 728                 *pPacket = cpu_to_le32(RXSF_READY << RX_STAT_CTL_OWNER_SHF);
 729
 730                 /* Make sure A or B is available to hardware as appropriate. */
 731                 writel(BufferIndex ? OK2USE_RX_B : OK2USE_RX_A,
 732                        &lp->lan_saa9730_regs->Ok2Use);
 733
 734                 /* Go to next packet in sequence. */
 735                 lp->NextRcvPacketIndex++;
 736                 if (lp->NextRcvPacketIndex >= LAN_SAA9730_RCV_Q_SIZE) {
 737                         lp->NextRcvPacketIndex = 0;
 738                         lp->NextRcvBufferIndex ^= 1;
 739                 }
 740
 741                 /* Address next packet */
 742                 BufferIndex = lp->NextRcvBufferIndex;
 743                 PacketIndex = lp->NextRcvPacketIndex;
 744                 pPacket = lp->RcvBuffer[BufferIndex][PacketIndex];
 745                 rx_status = le32_to_cpu(*pPacket);
 746         }
 747
 748         return 0;
 749 }
 750
 751 static irqreturn_t lan_saa9730_interrupt(const int irq, void *dev_id)
 752 {
 753         struct net_device *dev = dev_id;
 754         struct lan_saa9730_private *lp = netdev_priv(dev);
 755
 756         if (lan_saa9730_debug > 5)
 757                 printk("lan_saa9730_interrupt\n");
 758
 759         /* Disable the EVM LAN interrupt. */
 760         evm_saa9730_block_lan_int(lp);
 761
 762         /* Clear the EVM LAN interrupt. */
 763         evm_saa9730_clear_lan_int(lp);
 764
 765         /* Service pending transmit interrupts. */
 766         if (readl(&lp->lan_saa9730_regs->DmaStatus) & DMA_STATUS_MAC_TX_INT)
 767                 lan_saa9730_tx(dev);
 768
 769         /* Service pending receive interrupts. */
 770         if (readl(&lp->lan_saa9730_regs->DmaStatus) &
 771             (DMA_STATUS_MAC_RX_INT | DMA_STATUS_RX_INT |
 772              DMA_STATUS_RX_TO_INT)) lan_saa9730_rx(dev);
 773
 774         /* Enable the EVM LAN interrupt. */
 775         evm_saa9730_unblock_lan_int(lp);
 776
 777         return IRQ_HANDLED;
 778 }
 779
 780 static int lan_saa9730_open(struct net_device *dev)
 781 {
 782         struct lan_saa9730_private *lp = netdev_priv(dev);
 783
 784         /* Associate IRQ with lan_saa9730_interrupt */
 785         if (request_irq(dev->irq, &lan_saa9730_interrupt, 0, "SAA9730 Eth",
 786                         dev)) {
 787                 printk("lan_saa9730_open: Can't get irq %d\n", dev->irq);
 788                 return -EAGAIN;
 789         }
 790
 791         /* Enable the Lan interrupt in the event manager. */
 792         evm_saa9730_enable_lan_int(lp);
 793
 794         /* Start the LAN controller */
 795         if (lan_saa9730_start(lp))
 796                 return -1;
 797
 798         netif_start_queue(dev);
 799
 800         return 0;
 801 }
 802
 803 static int lan_saa9730_write(struct lan_saa9730_private *lp,
 804                              struct sk_buff *skb, int skblen)
 805 {
 806         unsigned char *pbData = skb->data;
 807         unsigned int len = skblen;
 808         unsigned char *pbPacketData;
 809         unsigned int tx_status;
 810         int BufferIndex;
 811         int PacketIndex;
 812
 813         if (lan_saa9730_debug > 5)
 814                 printk("lan_saa9730_write: skb=%p\n", skb);
 815
 816         BufferIndex = lp->NextTxmBufferIndex;
 817         PacketIndex = lp->NextTxmPacketIndex;
 818
 819         tx_status = le32_to_cpu(*(unsigned int *)lp->TxmBuffer[BufferIndex]
 820                                                               [PacketIndex]);
 821         if ((tx_status & TX_STAT_CTL_OWNER_MSK) !=
 822             (TXSF_EMPTY << TX_STAT_CTL_OWNER_SHF)) {
 823                 if (lan_saa9730_debug > 4)
 824                         printk
 825                             ("lan_saa9730_write: Tx buffer not available: tx_status = %x\n",
 826                              tx_status);
 827                 return -1;
 828         }
 829
 830         lp->NextTxmPacketIndex++;
 831         if (lp->NextTxmPacketIndex >= LAN_SAA9730_TXM_Q_SIZE) {
 832                 lp->NextTxmPacketIndex = 0;
 833                 lp->NextTxmBufferIndex ^= 1;
 834         }
 835
 836         pbPacketData = lp->TxmBuffer[BufferIndex][PacketIndex];
 837         pbPacketData += 4;
 838
 839         /* copy the bits */
 840         memcpy(pbPacketData, pbData, len);
 841
 842         /* Set transmit status for hardware */
 843         *(unsigned int *)lp->TxmBuffer[BufferIndex][PacketIndex] =
 844                 cpu_to_le32((TXSF_READY << TX_STAT_CTL_OWNER_SHF) |
 845                             (TX_STAT_CTL_INT_AFTER_TX <<
 846                              TX_STAT_CTL_FRAME_SHF) |
 847                             (len << TX_STAT_CTL_LENGTH_SHF));
 848
 849         /* Make sure A or B is available to hardware as appropriate. */
 850         writel(BufferIndex ? OK2USE_TX_B : OK2USE_TX_A,
 851                &lp->lan_saa9730_regs->Ok2Use);
 852
 853         return 0;
 854 }
 855
 856 static void lan_saa9730_tx_timeout(struct net_device *dev)
 857 {
 858         struct lan_saa9730_private *lp = netdev_priv(dev);
 859
 860         /* Transmitter timeout, serious problems */
 861         dev->stats.tx_errors++;
 862         printk("%s: transmit timed out, reset\n", dev->name);
 863         /*show_saa9730_regs(dev); */
 864         lan_saa9730_restart(lp);
 865
 866         dev->trans_start = jiffies;
 867         netif_wake_queue(dev);
 868 }
 869
 870 static int lan_saa9730_start_xmit(struct sk_buff *skb,
 871                                   struct net_device *dev)
 872 {
 873         struct lan_saa9730_private *lp = netdev_priv(dev);
 874         unsigned long flags;
 875         int skblen;
 876         int len;
 877
 878         if (lan_saa9730_debug > 4)
 879                 printk("Send packet: skb=%p\n", skb);
 880
 881         skblen = skb->len;
 882
 883         spin_lock_irqsave(&lp->lock, flags);
 884
 885         len = (skblen <= ETH_ZLEN) ? ETH_ZLEN : skblen;
 886
 887         if (lan_saa9730_write(lp, skb, skblen)) {
 888                 spin_unlock_irqrestore(&lp->lock, flags);
 889                 printk("Error when writing packet to controller: skb=%p\n", skb);
 890                 netif_stop_queue(dev);
 891                 return -1;
 892         }
 893
 894         dev->stats.tx_bytes += len;
 895         dev->stats.tx_packets++;
 896
 897         dev->trans_start = jiffies;
 898         netif_wake_queue(dev);
 899         dev_kfree_skb(skb);
 900
 901         spin_unlock_irqrestore(&lp->lock, flags);
 902
 903         return 0;
 904 }
 905
 906 static int lan_saa9730_close(struct net_device *dev)
 907 {
 908         struct lan_saa9730_private *lp = netdev_priv(dev);
 909
 910         if (lan_saa9730_debug > 1)
 911                 printk("lan_saa9730_close:\n");
 912
 913         netif_stop_queue(dev);
 914
 915         /* Disable the Lan interrupt in the event manager. */
 916         evm_saa9730_disable_lan_int(lp);
 917
 918         /* Stop the controller */
 919         if (lan_saa9730_stop(lp))
 920                 return -1;
 921
 922         free_irq(dev->irq, (void *) dev);
 923
 924         return 0;
 925 }
 926
 927 static void lan_saa9730_set_multicast(struct net_device *dev)
 928 {
 929         struct lan_saa9730_private *lp = netdev_priv(dev);
 930
 931         /* Stop the controller */
 932         lan_saa9730_stop(lp);
 933
 934         if (dev->flags & IFF_PROMISC) {
 935                 /* accept all packets */
 936                 writel(CAM_CONTROL_COMP_EN | CAM_CONTROL_STATION_ACC |
 937                        CAM_CONTROL_GROUP_ACC | CAM_CONTROL_BROAD_ACC,
 938                        &lp->lan_saa9730_regs->CamCtl);
 939         } else {
 940                 if (dev->flags & IFF_ALLMULTI || dev->mc_count) {
 941                         /* accept all multicast packets */
 942                         /*
 943                          * Will handle the multicast stuff later. -carstenl
 944                          */
 945                         writel(CAM_CONTROL_COMP_EN | CAM_CONTROL_GROUP_ACC |
 946                                CAM_CONTROL_BROAD_ACC,
 947                                &lp->lan_saa9730_regs->CamCtl);
 948                 }
 949         }
 950
 951         lan_saa9730_restart(lp);
 952 }
 953
 954
 955 static void __devexit saa9730_remove_one(struct pci_dev *pdev)
 956 {
 957         struct net_device *dev = pci_get_drvdata(pdev);
 958         struct lan_saa9730_private *lp = netdev_priv(dev);
 959
 960         if (dev) {
 961                 unregister_netdev(dev);
 962                 lan_saa9730_free_buffers(pdev, lp);
 963                 iounmap(lp->lan_saa9730_regs);
 964                 iounmap(lp->evm_saa9730_regs);
 965                 free_netdev(dev);
 966                 pci_release_regions(pdev);
 967                 pci_disable_device(pdev);
 968                 pci_set_drvdata(pdev, NULL);
 969         }
 970 }
 971
 972
 973 static int lan_saa9730_init(struct net_device *dev, struct pci_dev *pdev,
 974         unsigned long ioaddr, int irq)
 975 {
 976         struct lan_saa9730_private *lp = netdev_priv(dev);
 977         unsigned char ethernet_addr[6];
 978         int ret;
 979
 980         if (get_ethernet_addr(ethernet_addr)) {
 981                 ret = -ENODEV;
 982                 goto out;
 983         }
 984
 985         memcpy(dev->dev_addr, ethernet_addr, 6);
 986         dev->base_addr = ioaddr;
 987         dev->irq = irq;
 988
 989         lp->pci_dev = pdev;
 990
 991         /* Set SAA9730 LAN base address. */
 992         lp->lan_saa9730_regs = ioremap(ioaddr + SAA9730_LAN_REGS_ADDR,
 993                                        SAA9730_LAN_REGS_SIZE);
 994         if (!lp->lan_saa9730_regs) {
 995                 ret = -ENOMEM;
 996                 goto out;
 997         }
 998
 999         /* Set SAA9730 EVM base address. */
1000         lp->evm_saa9730_regs = ioremap(ioaddr + SAA9730_EVM_REGS_ADDR,
1001                                        SAA9730_EVM_REGS_SIZE);
1002         if (!lp->evm_saa9730_regs) {
1003                 ret = -ENOMEM;
1004                 goto out_iounmap_lan;
1005         }
1006
1007         /* Allocate LAN RX/TX frame buffer space. */
1008         if ((ret = lan_saa9730_allocate_buffers(pdev, lp)))
1009                 goto out_iounmap;
1010
1011         /* Stop LAN controller. */
1012         if ((ret = lan_saa9730_stop(lp)))
1013                 goto out_free_consistent;
1014
1015         /* Initialize CAM registers. */
1016         if ((ret = lan_saa9730_cam_init(dev)))
1017                 goto out_free_consistent;
1018
1019         /* Initialize MII registers. */
1020         if ((ret = lan_saa9730_mii_init(lp)))
1021                 goto out_free_consistent;
1022
1023         /* Initialize control registers. */
1024         if ((ret = lan_saa9730_control_init(lp)))
1025                 goto out_free_consistent;
1026
1027         /* Load CAM registers. */
1028         if ((ret = lan_saa9730_cam_load(lp)))
1029                 goto out_free_consistent;
1030
1031         /* Initialize DMA context registers. */
1032         if ((ret = lan_saa9730_dma_init(lp)))
1033                 goto out_free_consistent;
1034
1035         spin_lock_init(&lp->lock);
1036
1037         dev->open = lan_saa9730_open;
1038         dev->hard_start_xmit = lan_saa9730_start_xmit;
1039         dev->stop = lan_saa9730_close;
1040         dev->set_multicast_list = lan_saa9730_set_multicast;
1041         dev->tx_timeout = lan_saa9730_tx_timeout;
1042         dev->watchdog_timeo = (HZ >> 1);
1043         dev->dma = 0;
1044
1045         ret = register_netdev (dev);
1046         if (ret)
1047                 goto out_free_consistent;
1048
1049         return 0;
1050
1051 out_free_consistent:
1052         lan_saa9730_free_buffers(pdev, lp);
1053 out_iounmap:
1054         iounmap(lp->evm_saa9730_regs);
1055 out_iounmap_lan:
1056         iounmap(lp->lan_saa9730_regs);
1057 out:
1058         return ret;
1059 }
1060
1061
1062 static int __devinit saa9730_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
1063 {
1064         struct net_device *dev = NULL;
1065         unsigned long pci_ioaddr;
1066         int err;
1067
1068         if (lan_saa9730_debug > 1)
1069                 printk("saa9730.c: PCI bios is present, checking for devices...\n");
1070
1071         err = pci_enable_device(pdev);
1072         if (err) {
1073                 printk(KERN_ERR "Cannot enable PCI device, aborting.\n");
1074                 goto out;
1075         }
1076
1077         err = pci_request_regions(pdev, DRV_MODULE_NAME);
1078         if (err) {
1079                 printk(KERN_ERR "Cannot obtain PCI resources, aborting.\n");
1080                 goto out_disable_pdev;
1081         }
1082
1083         pci_irq_line = pdev->irq;
1084         /* LAN base address in located at BAR 1. */
1085
1086         pci_ioaddr = pci_resource_start(pdev, 1);
1087         pci_set_master(pdev);
1088
1089         printk("Found SAA9730 (PCI) at %lx, irq %d.\n",
1090                pci_ioaddr, pci_irq_line);
1091
1092         dev = alloc_etherdev(sizeof(struct lan_saa9730_private));
1093         if (!dev)
1094                 goto out_disable_pdev;
1095
1096         err = lan_saa9730_init(dev, pdev, pci_ioaddr, pci_irq_line);
1097         if (err) {
1098                 printk("LAN init failed");
1099                 goto out_free_netdev;
1100         }
1101
1102         pci_set_drvdata(pdev, dev);
1103         SET_NETDEV_DEV(dev, &pdev->dev);
1104         return 0;
1105
1106 out_free_netdev:
1107         free_netdev(dev);
1108 out_disable_pdev:
1109         pci_disable_device(pdev);
1110 out:
1111         pci_set_drvdata(pdev, NULL);
1112         return err;
1113 }
1114
1115
1116 static struct pci_driver saa9730_driver = {
1117         .name           = DRV_MODULE_NAME,
1118         .id_table       = saa9730_pci_tbl,
1119         .probe          = saa9730_init_one,
1120         .remove         = __devexit_p(saa9730_remove_one),
1121 };
1122
1123
1124 static int __init saa9730_init(void)
1125 {
1126         return pci_register_driver(&saa9730_driver);
1127 }
1128
1129 static void __exit saa9730_cleanup(void)
1130 {
1131         pci_unregister_driver(&saa9730_driver);
1132 }
1133
1134 module_init(saa9730_init);
1135 module_exit(saa9730_cleanup);
1136
1137 MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
1138 MODULE_DESCRIPTION("Philips SAA9730 ethernet driver");
1139 MODULE_LICENSE("GPL");