2 Low Level Linux Driver for the IBM Microchannel SCSI Subsystem for
4 Copyright (c) 1995 Strom Systems, Inc. under the terms of the GNU
5 General Public License. Written by Martin Kolinek, December 1995.
6 Further development by: Chris Beauregard, Klaus Kudielka, Michael Lang
7 See the file Documentation/scsi/ibmmca.txt for a detailed description
8 of this driver, the commandline arguments and the history of its
10 See the WWW-page: http://www.uni-mainz.de/~langm000/linux.html for latest
11 updates, info and ADF-files for adapters supported by this driver.
13 Alan Cox <alan@redhat.com>
14 Updated for Linux 2.5.45 to use the new error handler, cleaned up the
15 lock macros and did a few unavoidable locking tweaks, plus one locking
16 fix in the irq and completion path.
20 #include <linux/config.h>
21 #ifndef LINUX_VERSION_CODE
22 #include <linux/version.h>
24 #if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,45)
25 #error "This driver works only with kernel 2.5.45 or higher!"
27 #include <linux/module.h>
28 #include <linux/kernel.h>
29 #include <linux/types.h>
30 #include <linux/ctype.h>
31 #include <linux/string.h>
32 #include <linux/interrupt.h>
33 #include <linux/ioport.h>
34 #include <linux/delay.h>
35 #include <linux/blkdev.h>
36 #include <linux/proc_fs.h>
37 #include <linux/stat.h>
38 #include <linux/mca.h>
39 #include <linux/spinlock.h>
40 #include <linux/init.h>
41 #include <linux/mca-legacy.h>
43 #include <asm/system.h>
47 #include <scsi/scsi_host.h>
50 /* current version of this driver-source: */
51 #define IBMMCA_SCSI_DRIVER_VERSION "4.0b-ac"
53 /* driver configuration */
54 #define IM_MAX_HOSTS 8 /* maximum number of host adapters */
55 #define IM_RESET_DELAY 60 /* seconds allowed for a reset */
57 /* driver debugging - #undef all for normal operation */
58 /* if defined: count interrupts and ignore this special one: */
59 #undef IM_DEBUG_TIMEOUT //50
62 /* verbose interrupt: */
64 /* verbose queuecommand: */
66 /* verbose queucommand for specific SCSI-device type: */
67 #undef IM_DEBUG_CMD_SPEC_DEV
68 /* verbose device probing */
71 /* device type that shall be displayed on syslog (only during debugging): */
72 #define IM_DEBUG_CMD_DEVICE TYPE_TAPE
74 /* relative addresses of hardware registers on a subsystem */
75 #define IM_CMD_REG(hi) (hosts[(hi)]->io_port) /*Command Interface, (4 bytes long) */
76 #define IM_ATTN_REG(hi) (hosts[(hi)]->io_port+4) /*Attention (1 byte) */
77 #define IM_CTR_REG(hi) (hosts[(hi)]->io_port+5) /*Basic Control (1 byte) */
78 #define IM_INTR_REG(hi) (hosts[(hi)]->io_port+6) /*Interrupt Status (1 byte, r/o) */
79 #define IM_STAT_REG(hi) (hosts[(hi)]->io_port+7) /*Basic Status (1 byte, read only) */
81 /* basic I/O-port of first adapter */
82 #define IM_IO_PORT 0x3540
83 /* maximum number of hosts that can be found */
84 #define IM_N_IO_PORT 8
86 /*requests going into the upper nibble of the Attention register */
87 /*note: the lower nibble specifies the device(0-14), or subsystem(15) */
88 #define IM_IMM_CMD 0x10 /*immediate command */
89 #define IM_SCB 0x30 /*Subsystem Control Block command */
90 #define IM_LONG_SCB 0x40 /*long Subsystem Control Block command */
91 #define IM_EOI 0xe0 /*end-of-interrupt request */
93 /*values for bits 7,1,0 of Basic Control reg. (bits 6-2 reserved) */
94 #define IM_HW_RESET 0x80 /*hardware reset */
95 #define IM_ENABLE_DMA 0x02 /*enable subsystem's busmaster DMA */
96 #define IM_ENABLE_INTR 0x01 /*enable interrupts to the system */
98 /*to interpret the upper nibble of Interrupt Status register */
99 /*note: the lower nibble specifies the device(0-14), or subsystem(15) */
100 #define IM_SCB_CMD_COMPLETED 0x10
101 #define IM_SCB_CMD_COMPLETED_WITH_RETRIES 0x50
102 #define IM_LOOP_SCATTER_BUFFER_FULL 0x60
103 #define IM_ADAPTER_HW_FAILURE 0x70
104 #define IM_IMMEDIATE_CMD_COMPLETED 0xa0
105 #define IM_CMD_COMPLETED_WITH_FAILURE 0xc0
106 #define IM_CMD_ERROR 0xe0
107 #define IM_SOFTWARE_SEQUENCING_ERROR 0xf0
109 /*to interpret bits 3-0 of Basic Status register (bits 7-4 reserved) */
110 #define IM_CMD_REG_FULL 0x08
111 #define IM_CMD_REG_EMPTY 0x04
112 #define IM_INTR_REQUEST 0x02
115 /*immediate commands (word written into low 2 bytes of command reg) */
116 #define IM_RESET_IMM_CMD 0x0400
117 #define IM_FEATURE_CTR_IMM_CMD 0x040c
118 #define IM_DMA_PACING_IMM_CMD 0x040d
119 #define IM_ASSIGN_IMM_CMD 0x040e
120 #define IM_ABORT_IMM_CMD 0x040f
121 #define IM_FORMAT_PREP_IMM_CMD 0x0417
123 /*SCB (Subsystem Control Block) structure */
125 unsigned short command; /*command word (read, etc.) */
126 unsigned short enable; /*enable word, modifies cmd */
128 unsigned long log_blk_adr; /*block address on SCSI device */
129 unsigned char scsi_cmd_length; /*6,10,12, for other scsi cmd */
131 unsigned long sys_buf_adr; /*physical system memory adr */
132 unsigned long sys_buf_length; /*size of sys mem buffer */
133 unsigned long tsb_adr; /*Termination Status Block adr */
134 unsigned long scb_chain_adr; /*optional SCB chain address */
137 unsigned short count; /*block count, on SCSI device */
138 unsigned short length; /*block length, on SCSI device */
140 unsigned char scsi_command[12]; /*other scsi command */
144 /*structure scatter-gather element (for list of system memory areas) */
147 unsigned long byte_length;
150 /*structure returned by a get_pos_info command: */
152 unsigned short pos_id; /* adapter id */
153 unsigned char pos_3a; /* pos 3 (if pos 6 = 0) */
154 unsigned char pos_2; /* pos 2 */
155 unsigned char int_level; /* interrupt level IRQ 11 or 14 */
156 unsigned char pos_4a; /* pos 4 (if pos 6 = 0) */
157 unsigned short connector_size; /* MCA connector size: 16 or 32 Bit */
158 unsigned char num_luns; /* number of supported luns per device */
159 unsigned char num_puns; /* number of supported puns */
160 unsigned char pacing_factor; /* pacing factor */
161 unsigned char num_ldns; /* number of ldns available */
162 unsigned char eoi_off; /* time EOI and interrupt inactive */
163 unsigned char max_busy; /* time between reset and busy on */
164 unsigned short cache_stat; /* ldn cachestat. Bit=1 = not cached */
165 unsigned short retry_stat; /* retry status of ldns. Bit=1=disabled */
166 unsigned char pos_4b; /* pos 4 (if pos 6 = 1) */
167 unsigned char pos_3b; /* pos 3 (if pos 6 = 1) */
168 unsigned char pos_6; /* pos 6 */
169 unsigned char pos_5; /* pos 5 */
170 unsigned short max_overlap; /* maximum overlapping requests */
171 unsigned short num_bus; /* number of SCSI-busses */
174 /*values for SCB command word */
175 #define IM_NO_SYNCHRONOUS 0x0040 /*flag for any command */
176 #define IM_NO_DISCONNECT 0x0080 /*flag for any command */
177 #define IM_READ_DATA_CMD 0x1c01
178 #define IM_WRITE_DATA_CMD 0x1c02
179 #define IM_READ_VERIFY_CMD 0x1c03
180 #define IM_WRITE_VERIFY_CMD 0x1c04
181 #define IM_REQUEST_SENSE_CMD 0x1c08
182 #define IM_READ_CAPACITY_CMD 0x1c09
183 #define IM_DEVICE_INQUIRY_CMD 0x1c0b
184 #define IM_READ_LOGICAL_CMD 0x1c2a
185 #define IM_OTHER_SCSI_CMD_CMD 0x241f
187 /* unused, but supported, SCB commands */
188 #define IM_GET_COMMAND_COMPLETE_STATUS_CMD 0x1c07 /* command status */
189 #define IM_GET_POS_INFO_CMD 0x1c0a /* returns neat stuff */
190 #define IM_READ_PREFETCH_CMD 0x1c31 /* caching controller only */
191 #define IM_FOMAT_UNIT_CMD 0x1c16 /* format unit */
192 #define IM_REASSIGN_BLOCK_CMD 0x1c18 /* in case of error */
194 /*values to set bits in the enable word of SCB */
195 #define IM_READ_CONTROL 0x8000
196 #define IM_REPORT_TSB_ONLY_ON_ERROR 0x4000
197 #define IM_RETRY_ENABLE 0x2000
198 #define IM_POINTER_TO_LIST 0x1000
199 #define IM_SUPRESS_EXCEPTION_SHORT 0x0400
200 #define IM_BYPASS_BUFFER 0x0200
201 #define IM_CHAIN_ON_NO_ERROR 0x0001
203 /*TSB (Termination Status Block) structure */
205 unsigned short end_status;
206 unsigned short reserved1;
207 unsigned long residual_byte_count;
208 unsigned long sg_list_element_adr;
209 unsigned short status_length;
210 unsigned char dev_status;
211 unsigned char cmd_status;
212 unsigned char dev_error;
213 unsigned char cmd_error;
214 unsigned short reserved2;
215 unsigned short reserved3;
216 unsigned short low_of_last_scb_adr;
217 unsigned short high_of_last_scb_adr;
220 /*subsystem uses interrupt request level 14 */
222 /*SCSI-2 F/W may evade to interrupt 11 */
225 /* Model 95 has an additional alphanumeric display, which can be used
226 to display SCSI-activities. 8595 models do not have any disk led, which
227 makes this feature quite useful.
228 The regular PS/2 disk led is turned on/off by bits 6,7 of system
231 /* LED display-port (actually, last LED on display) */
232 #define MOD95_LED_PORT 0x108
233 /* system-control-register of PS/2s with diskindicator */
234 #define PS2_SYS_CTR 0x92
235 /* activity displaying methods */
238 #define LED_ACTIVITY 4
242 /* The SCSI-ID(!) of the accessed SCSI-device is shown on PS/2-95 machines' LED
243 displays. ldn is no longer displayed here, because the ldn mapping is now
244 done dynamically and the ldn <-> pun,lun maps can be looked-up at boottime
245 or during uptime in /proc/scsi/ibmmca/<host_no> in case of trouble,
246 interest, debugging or just for having fun. The left number gives the
247 host-adapter number and the right shows the accessed SCSI-ID. */
249 /* display_mode is set by the ibmmcascsi= command line arg */
250 static int display_mode = 0;
251 /* set default adapter timeout */
252 static unsigned int adapter_timeout = 45;
253 /* for probing on feature-command: */
254 static unsigned int global_command_error_excuse = 0;
255 /* global setting by command line for adapter_speed */
256 static int global_adapter_speed = 0; /* full speed by default */
258 /* Panel / LED on, do it right for F/W addressin, too. adisplay will
259 * just ignore ids>7, as the panel has only 7 digits available */
260 #define PS2_DISK_LED_ON(ad,id) { if (display_mode & LED_DISP) { if (id>9) \
261 outw((ad+48)|((id+55)<<8), MOD95_LED_PORT ); else \
262 outw((ad+48)|((id+48)<<8), MOD95_LED_PORT ); } else \
263 if (display_mode & LED_ADISP) { if (id<7) outb((char)(id+48),MOD95_LED_PORT+1+id); \
264 outb((char)(ad+48), MOD95_LED_PORT); } \
265 if ((display_mode & LED_ACTIVITY)||(!display_mode)) \
266 outb(inb(PS2_SYS_CTR) | 0xc0, PS2_SYS_CTR); }
268 /* Panel / LED off */
269 /* bug fixed, Dec 15, 1997, where | was replaced by & here */
270 #define PS2_DISK_LED_OFF() { if (display_mode & LED_DISP) \
271 outw(0x2020, MOD95_LED_PORT ); else if (display_mode & LED_ADISP) { \
272 outl(0x20202020,MOD95_LED_PORT); outl(0x20202020,MOD95_LED_PORT+4); } \
273 if ((display_mode & LED_ACTIVITY)||(!display_mode)) \
274 outb(inb(PS2_SYS_CTR) & 0x3f, PS2_SYS_CTR); }
276 /*list of supported subsystems */
277 struct subsys_list_struct {
278 unsigned short mca_id;
282 /* types of different supported hardware that goes to hostdata special */
283 #define IBM_SCSI2_FW 0
284 #define IBM_7568_WCACHE 1
285 #define IBM_EXP_UNIT 2
286 #define IBM_SCSI_WCACHE 3
289 /* other special flags for hostdata structure */
290 #define FORCED_DETECTION 100
291 #define INTEGRATED_SCSI 101
293 /* List of possible IBM-SCSI-adapters */
294 static struct subsys_list_struct subsys_list[] = {
295 {0x8efc, "IBM SCSI-2 F/W Adapter"}, /* special = 0 */
296 {0x8efd, "IBM 7568 Industrial Computer SCSI Adapter w/Cache"}, /* special = 1 */
297 {0x8ef8, "IBM Expansion Unit SCSI Controller"}, /* special = 2 */
298 {0x8eff, "IBM SCSI Adapter w/Cache"}, /* special = 3 */
299 {0x8efe, "IBM SCSI Adapter"}, /* special = 4 */
302 /* Max number of logical devices (can be up from 0 to 14). 15 is the address
303 of the adapter itself. */
304 #define MAX_LOG_DEV 15
306 /*local data for a logical device */
307 struct logical_device {
308 struct im_scb scb; /* SCSI-subsystem-control-block structure */
309 struct im_tsb tsb; /* SCSI command complete status block structure */
310 struct im_sge sge[16]; /* scatter gather list structure */
311 unsigned char buf[256]; /* SCSI command return data buffer */
312 Scsi_Cmnd *cmd; /* SCSI-command that is currently in progress */
313 int device_type; /* type of the SCSI-device. See include/scsi/scsi.h
314 for interpretation of the possible values */
315 int block_length; /* blocksize of a particular logical SCSI-device */
316 int cache_flag; /* 1 if this is uncached, 0 if cache is present for ldn */
317 int retry_flag; /* 1 if adapter retry is disabled, 0 if enabled */
320 /* statistics of the driver during operations (for proc_info) */
321 struct Driver_Statistics {
322 /* SCSI statistics on the adapter */
323 int ldn_access[MAX_LOG_DEV + 1]; /* total accesses on a ldn */
324 int ldn_read_access[MAX_LOG_DEV + 1]; /* total read-access on a ldn */
325 int ldn_write_access[MAX_LOG_DEV + 1]; /* total write-access on a ldn */
326 int ldn_inquiry_access[MAX_LOG_DEV + 1]; /* total inquiries on a ldn */
327 int ldn_modeselect_access[MAX_LOG_DEV + 1]; /* total mode selects on ldn */
328 int scbs; /* short SCBs queued */
329 int long_scbs; /* long SCBs queued */
330 int total_accesses; /* total accesses on all ldns */
331 int total_interrupts; /* total interrupts (should be
332 same as total_accesses) */
333 int total_errors; /* command completed with error */
334 /* dynamical assignment statistics */
335 int total_scsi_devices; /* number of physical pun,lun */
336 int dyn_flag; /* flag showing dynamical mode */
337 int dynamical_assignments; /* number of remappings of ldns */
338 int ldn_assignments[MAX_LOG_DEV + 1]; /* number of remappings of each
342 /* data structure for each host adapter */
343 struct ibmmca_hostdata {
344 /* array of logical devices: */
345 struct logical_device _ld[MAX_LOG_DEV + 1];
346 /* array to convert (pun, lun) into logical device number: */
347 unsigned char _get_ldn[16][8];
348 /*array that contains the information about the physical SCSI-devices
349 attached to this host adapter: */
350 unsigned char _get_scsi[16][8];
351 /* used only when checking logical devices: */
352 int _local_checking_phase_flag;
353 /* report received interrupt: */
355 /* report termination-status of SCSI-command: */
357 /* reset status (used only when doing reset): */
359 /* code of the last SCSI command (needed for panic info): */
360 int _last_scsi_command[MAX_LOG_DEV + 1];
361 /* identifier of the last SCSI-command type */
362 int _last_scsi_type[MAX_LOG_DEV + 1];
363 /* last blockcount */
364 int _last_scsi_blockcount[MAX_LOG_DEV + 1];
365 /* last locgical block address */
366 unsigned long _last_scsi_logical_block[MAX_LOG_DEV + 1];
367 /* Counter that points on the next reassignable ldn for dynamical
368 remapping. The default value is 7, that is the first reassignable
369 number in the list at boottime: */
371 /* Statistics-structure for this IBM-SCSI-host: */
372 struct Driver_Statistics _IBM_DS;
373 /* This hostadapters pos-registers pos2 until pos6 */
374 unsigned int _pos[8];
375 /* assign a special variable, that contains dedicated info about the
378 /* connector size on the MCA bus */
380 /* synchronous SCSI transfer rate bitpattern */
384 /* macros to access host data structure */
385 #define subsystem_pun(hi) (hosts[(hi)]->this_id)
386 #define subsystem_maxid(hi) (hosts[(hi)]->max_id)
387 #define ld(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_ld)
388 #define get_ldn(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_get_ldn)
389 #define get_scsi(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_get_scsi)
390 #define local_checking_phase_flag(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_local_checking_phase_flag)
391 #define got_interrupt(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_got_interrupt)
392 #define stat_result(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_stat_result)
393 #define reset_status(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_reset_status)
394 #define last_scsi_command(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_last_scsi_command)
395 #define last_scsi_type(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_last_scsi_type)
396 #define last_scsi_blockcount(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_last_scsi_blockcount)
397 #define last_scsi_logical_block(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_last_scsi_logical_block)
398 #define last_scsi_type(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_last_scsi_type)
399 #define next_ldn(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_next_ldn)
400 #define IBM_DS(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_IBM_DS)
401 #define special(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_special)
402 #define subsystem_connector_size(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_connector_size)
403 #define adapter_speed(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_adapter_speed)
404 #define pos2(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_pos[2])
405 #define pos3(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_pos[3])
406 #define pos4(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_pos[4])
407 #define pos5(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_pos[5])
408 #define pos6(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_pos[6])
410 /* Define a arbitrary number as subsystem-marker-type. This number is, as
411 described in the ANSI-SCSI-standard, not occupied by other device-types. */
412 #define TYPE_IBM_SCSI_ADAPTER 0x2F
414 /* Define 0xFF for no device type, because this type is not defined within
415 the ANSI-SCSI-standard, therefore, it can be used and should not cause any
417 #define TYPE_NO_DEVICE 0xFF
419 /* define medium-changer. If this is not defined previously, e.g. Linux
420 2.0.x, define this type here. */
421 #ifndef TYPE_MEDIUM_CHANGER
422 #define TYPE_MEDIUM_CHANGER 0x08
425 /* define possible operations for the immediate_assign command */
429 /* ldn which is used to probe the SCSI devices */
432 /* reset status flag contents */
433 #define IM_RESET_NOT_IN_PROGRESS 0
434 #define IM_RESET_IN_PROGRESS 1
435 #define IM_RESET_FINISHED_OK 2
436 #define IM_RESET_FINISHED_FAIL 3
437 #define IM_RESET_NOT_IN_PROGRESS_NO_INT 4
438 #define IM_RESET_FINISHED_OK_NO_INT 5
440 /* define undefined SCSI-command */
441 #define NO_SCSI 0xffff
443 /*-----------------------------------------------------------------------*/
445 /* if this is nonzero, ibmmcascsi option has been passed to the kernel */
446 static int io_port[IM_MAX_HOSTS] = { 0, 0, 0, 0, 0, 0, 0, 0 };
447 static int scsi_id[IM_MAX_HOSTS] = { 7, 7, 7, 7, 7, 7, 7, 7 };
449 /* fill module-parameters only, when this define is present.
450 (that is kernel version 2.1.x) */
452 static char *boot_options = NULL;
453 module_param(boot_options, charp, 0);
454 module_param_array(io_port, int, NULL, 0);
455 module_param_array(scsi_id, int, NULL, 0);
457 #if 0 /* FIXME: No longer exist? --RR */
458 MODULE_PARM(display, "1i");
459 MODULE_PARM(adisplay, "1i");
460 MODULE_PARM(normal, "1i");
461 MODULE_PARM(ansi, "1i");
464 MODULE_LICENSE("GPL");
466 /*counter of concurrent disk read/writes, to turn on/off disk led */
467 static int disk_rw_in_progress = 0;
469 /* host information */
470 static int found = 0;
471 static struct Scsi_Host *hosts[IM_MAX_HOSTS + 1] = {
472 NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL
474 static unsigned int pos[8]; /* whole pos register-line for diagnosis */
475 /* Taking into account the additions, made by ZP Gu.
476 * This selects now the preset value from the configfile and
477 * offers the 'normal' commandline option to be accepted */
478 #ifdef CONFIG_IBMMCA_SCSI_ORDER_STANDARD
479 static char ibm_ansi_order = 1;
481 static char ibm_ansi_order = 0;
484 static void issue_cmd(int, unsigned long, unsigned char);
485 static void internal_done(Scsi_Cmnd * cmd);
486 static void check_devices(int, int);
487 static int immediate_assign(int, unsigned int, unsigned int, unsigned int, unsigned int);
488 static int immediate_feature(int, unsigned int, unsigned int);
489 #ifdef CONFIG_IBMMCA_SCSI_DEV_RESET
490 static int immediate_reset(int, unsigned int);
492 static int device_inquiry(int, int);
493 static int read_capacity(int, int);
494 static int get_pos_info(int);
495 static char *ti_p(int);
496 static char *ti_l(int);
497 static char *ibmrate(unsigned int, int);
498 static int probe_display(int);
499 static int probe_bus_mode(int);
500 static int device_exists(int, int, int *, int *);
501 static struct Scsi_Host *ibmmca_register(Scsi_Host_Template *, int, int, int, char *);
502 static int option_setup(char *);
503 /* local functions needed for proc_info */
504 static int ldn_access_load(int, int);
505 static int ldn_access_total_read_write(int);
507 static irqreturn_t interrupt_handler(int irq, void *dev_id,
508 struct pt_regs *regs)
510 int host_index, ihost_index;
511 unsigned int intr_reg;
512 unsigned int cmd_result;
516 struct Scsi_Host *dev = dev_id;
518 spin_lock(dev->host_lock);
519 /* search for one adapter-response on shared interrupt */
520 for (host_index = 0; hosts[host_index] && !(inb(IM_STAT_REG(host_index)) & IM_INTR_REQUEST); host_index++);
521 /* return if some other device on this IRQ caused the interrupt */
522 if (!hosts[host_index]) {
523 spin_unlock(dev->host_lock);
527 /* the reset-function already did all the job, even ints got
528 renabled on the subsystem, so just return */
529 if ((reset_status(host_index) == IM_RESET_NOT_IN_PROGRESS_NO_INT) || (reset_status(host_index) == IM_RESET_FINISHED_OK_NO_INT)) {
530 reset_status(host_index) = IM_RESET_NOT_IN_PROGRESS;
531 spin_unlock(dev->host_lock);
535 /*must wait for attention reg not busy, then send EOI to subsystem */
537 if (!(inb(IM_STAT_REG(host_index)) & IM_BUSY))
541 ihost_index = host_index;
542 /*get command result and logical device */
543 intr_reg = (unsigned char) (inb(IM_INTR_REG(ihost_index)));
544 cmd_result = intr_reg & 0xf0;
545 ldn = intr_reg & 0x0f;
546 /* get the last_scsi_command here */
547 lastSCSI = last_scsi_command(ihost_index)[ldn];
548 outb(IM_EOI | ldn, IM_ATTN_REG(ihost_index));
550 /*these should never happen (hw fails, or a local programming bug) */
551 if (!global_command_error_excuse) {
552 switch (cmd_result) {
553 /* Prevent from Ooopsing on error to show the real reason */
554 case IM_ADAPTER_HW_FAILURE:
555 case IM_SOFTWARE_SEQUENCING_ERROR:
557 printk(KERN_ERR "IBM MCA SCSI: Fatal Subsystem ERROR!\n");
558 printk(KERN_ERR " Last cmd=0x%x, ena=%x, len=", lastSCSI, ld(ihost_index)[ldn].scb.enable);
559 if (ld(ihost_index)[ldn].cmd)
560 printk("%ld/%ld,", (long) (ld(ihost_index)[ldn].cmd->request_bufflen), (long) (ld(ihost_index)[ldn].scb.sys_buf_length));
563 if (ld(ihost_index)[ldn].cmd)
564 printk("Blocksize=%d", ld(ihost_index)[ldn].scb.u2.blk.length);
566 printk("Blocksize=none");
567 printk(", host=0x%x, ldn=0x%x\n", ihost_index, ldn);
568 if (ld(ihost_index)[ldn].cmd) {
569 printk(KERN_ERR "Blockcount=%d/%d\n", last_scsi_blockcount(ihost_index)[ldn], ld(ihost_index)[ldn].scb.u2.blk.count);
570 printk(KERN_ERR "Logical block=%lx/%lx\n", last_scsi_logical_block(ihost_index)[ldn], ld(ihost_index)[ldn].scb.u1.log_blk_adr);
572 printk(KERN_ERR "Reason given: %s\n", (cmd_result == IM_ADAPTER_HW_FAILURE) ? "HARDWARE FAILURE" : (cmd_result == IM_SOFTWARE_SEQUENCING_ERROR) ? "SOFTWARE SEQUENCING ERROR" : (cmd_result == IM_CMD_ERROR) ? "COMMAND ERROR" : "UNKNOWN");
573 /* if errors appear, enter this section to give detailed info */
574 printk(KERN_ERR "IBM MCA SCSI: Subsystem Error-Status follows:\n");
575 printk(KERN_ERR " Command Type................: %x\n", last_scsi_type(ihost_index)[ldn]);
576 printk(KERN_ERR " Attention Register..........: %x\n", inb(IM_ATTN_REG(ihost_index)));
577 printk(KERN_ERR " Basic Control Register......: %x\n", inb(IM_CTR_REG(ihost_index)));
578 printk(KERN_ERR " Interrupt Status Register...: %x\n", intr_reg);
579 printk(KERN_ERR " Basic Status Register.......: %x\n", inb(IM_STAT_REG(ihost_index)));
580 if ((last_scsi_type(ihost_index)[ldn] == IM_SCB) || (last_scsi_type(ihost_index)[ldn] == IM_LONG_SCB)) {
581 printk(KERN_ERR " SCB-Command.................: %x\n", ld(ihost_index)[ldn].scb.command);
582 printk(KERN_ERR " SCB-Enable..................: %x\n", ld(ihost_index)[ldn].scb.enable);
583 printk(KERN_ERR " SCB-logical block address...: %lx\n", ld(ihost_index)[ldn].scb.u1.log_blk_adr);
584 printk(KERN_ERR " SCB-system buffer address...: %lx\n", ld(ihost_index)[ldn].scb.sys_buf_adr);
585 printk(KERN_ERR " SCB-system buffer length....: %lx\n", ld(ihost_index)[ldn].scb.sys_buf_length);
586 printk(KERN_ERR " SCB-tsb address.............: %lx\n", ld(ihost_index)[ldn].scb.tsb_adr);
587 printk(KERN_ERR " SCB-Chain address...........: %lx\n", ld(ihost_index)[ldn].scb.scb_chain_adr);
588 printk(KERN_ERR " SCB-block count.............: %x\n", ld(ihost_index)[ldn].scb.u2.blk.count);
589 printk(KERN_ERR " SCB-block length............: %x\n", ld(ihost_index)[ldn].scb.u2.blk.length);
591 printk(KERN_ERR " Send this report to the maintainer.\n");
592 panic("IBM MCA SCSI: Fatal error message from the subsystem (0x%X,0x%X)!\n", lastSCSI, cmd_result);
596 /* The command error handling is made silent, but we tell the
597 * calling function, that there is a reported error from the
599 switch (cmd_result) {
600 case IM_ADAPTER_HW_FAILURE:
601 case IM_SOFTWARE_SEQUENCING_ERROR:
603 global_command_error_excuse = CMD_FAIL;
606 global_command_error_excuse = 0;
610 /* if no panic appeared, increase the interrupt-counter */
611 IBM_DS(ihost_index).total_interrupts++;
612 /*only for local checking phase */
613 if (local_checking_phase_flag(ihost_index)) {
614 stat_result(ihost_index) = cmd_result;
615 got_interrupt(ihost_index) = 1;
616 reset_status(ihost_index) = IM_RESET_FINISHED_OK;
617 last_scsi_command(ihost_index)[ldn] = NO_SCSI;
618 spin_unlock(dev->host_lock);
621 /* handling of commands coming from upper level of scsi driver */
622 if (last_scsi_type(ihost_index)[ldn] == IM_IMM_CMD) {
623 /* verify ldn, and may handle rare reset immediate command */
624 if ((reset_status(ihost_index) == IM_RESET_IN_PROGRESS) && (last_scsi_command(ihost_index)[ldn] == IM_RESET_IMM_CMD)) {
625 if (cmd_result == IM_CMD_COMPLETED_WITH_FAILURE) {
626 disk_rw_in_progress = 0;
628 reset_status(ihost_index) = IM_RESET_FINISHED_FAIL;
630 /*reset disk led counter, turn off disk led */
631 disk_rw_in_progress = 0;
633 reset_status(ihost_index) = IM_RESET_FINISHED_OK;
635 stat_result(ihost_index) = cmd_result;
636 last_scsi_command(ihost_index)[ldn] = NO_SCSI;
637 last_scsi_type(ihost_index)[ldn] = 0;
638 spin_unlock(dev->host_lock);
640 } else if (last_scsi_command(ihost_index)[ldn] == IM_ABORT_IMM_CMD) {
641 /* react on SCSI abort command */
642 #ifdef IM_DEBUG_PROBE
643 printk("IBM MCA SCSI: Interrupt from SCSI-abort.\n");
645 disk_rw_in_progress = 0;
647 cmd = ld(ihost_index)[ldn].cmd;
648 ld(ihost_index)[ldn].cmd = NULL;
649 if (cmd_result == IM_CMD_COMPLETED_WITH_FAILURE)
650 cmd->result = DID_NO_CONNECT << 16;
652 cmd->result = DID_ABORT << 16;
653 stat_result(ihost_index) = cmd_result;
654 last_scsi_command(ihost_index)[ldn] = NO_SCSI;
655 last_scsi_type(ihost_index)[ldn] = 0;
657 (cmd->scsi_done) (cmd); /* should be the internal_done */
658 spin_unlock(dev->host_lock);
661 disk_rw_in_progress = 0;
663 reset_status(ihost_index) = IM_RESET_FINISHED_OK;
664 stat_result(ihost_index) = cmd_result;
665 last_scsi_command(ihost_index)[ldn] = NO_SCSI;
666 spin_unlock(dev->host_lock);
670 last_scsi_command(ihost_index)[ldn] = NO_SCSI;
671 last_scsi_type(ihost_index)[ldn] = 0;
672 cmd = ld(ihost_index)[ldn].cmd;
673 ld(ihost_index)[ldn].cmd = NULL;
674 #ifdef IM_DEBUG_TIMEOUT
676 if ((cmd->target == TIMEOUT_PUN) && (cmd->device->lun == TIMEOUT_LUN)) {
677 printk("IBM MCA SCSI: Ignoring interrupt from pun=%x, lun=%x.\n", cmd->target, cmd->device->lun);
682 /*if no command structure, just return, else clear cmd */
685 spin_unlock(dev->host_lock);
690 printk("cmd=%02x ireg=%02x ds=%02x cs=%02x de=%02x ce=%02x\n", cmd->cmnd[0], intr_reg, ld(ihost_index)[ldn].tsb.dev_status, ld(ihost_index)[ldn].tsb.cmd_status, ld(ihost_index)[ldn].tsb.dev_error, ld(ihost_index)[ldn].tsb.cmd_error);
692 /*if this is end of media read/write, may turn off PS/2 disk led */
693 if ((ld(ihost_index)[ldn].device_type != TYPE_NO_LUN) && (ld(ihost_index)[ldn].device_type != TYPE_NO_DEVICE)) {
694 /* only access this, if there was a valid device addressed */
695 if (--disk_rw_in_progress == 0)
699 /* IBM describes the status-mask to be 0x1e, but this is not conform
700 * with SCSI-definition, I suppose, the reason for it is that IBM
701 * adapters do not support CMD_TERMINATED, TASK_SET_FULL and
702 * ACA_ACTIVE as returning statusbyte information. (ML) */
703 if (cmd_result == IM_CMD_COMPLETED_WITH_FAILURE) {
704 cmd->result = (unsigned char) (ld(ihost_index)[ldn].tsb.dev_status & 0x1e);
705 IBM_DS(ihost_index).total_errors++;
708 /* write device status into cmd->result, and call done function */
709 if (lastSCSI == NO_SCSI) { /* unexpected interrupt :-( */
710 cmd->result |= DID_BAD_INTR << 16;
711 printk("IBM MCA SCSI: WARNING - Interrupt from non-pending SCSI-command!\n");
712 } else /* things went right :-) */
713 cmd->result |= DID_OK << 16;
715 (cmd->scsi_done) (cmd);
716 spin_unlock(dev->host_lock);
720 static void issue_cmd(int host_index, unsigned long cmd_reg, unsigned char attn_reg)
723 /* must wait for attention reg not busy */
725 spin_lock_irqsave(hosts[host_index]->host_lock, flags);
726 if (!(inb(IM_STAT_REG(host_index)) & IM_BUSY))
728 spin_unlock_irqrestore(hosts[host_index]->host_lock, flags);
730 /* write registers and enable system interrupts */
731 outl(cmd_reg, IM_CMD_REG(host_index));
732 outb(attn_reg, IM_ATTN_REG(host_index));
733 spin_unlock_irqrestore(hosts[host_index]->host_lock, flags);
736 static void internal_done(Scsi_Cmnd * cmd)
742 /* SCSI-SCB-command for device_inquiry */
743 static int device_inquiry(int host_index, int ldn)
750 scb = &(ld(host_index)[ldn].scb);
751 tsb = &(ld(host_index)[ldn].tsb);
752 buf = (unsigned char *) (&(ld(host_index)[ldn].buf));
753 ld(host_index)[ldn].tsb.dev_status = 0; /* prepare statusblock */
754 for (retr = 0; retr < 3; retr++) {
755 /* fill scb with inquiry command */
756 scb->command = IM_DEVICE_INQUIRY_CMD | IM_NO_DISCONNECT;
757 scb->enable = IM_REPORT_TSB_ONLY_ON_ERROR | IM_READ_CONTROL | IM_SUPRESS_EXCEPTION_SHORT | IM_RETRY_ENABLE | IM_BYPASS_BUFFER;
758 last_scsi_command(host_index)[ldn] = IM_DEVICE_INQUIRY_CMD;
759 last_scsi_type(host_index)[ldn] = IM_SCB;
760 scb->sys_buf_adr = isa_virt_to_bus(buf);
761 scb->sys_buf_length = 255; /* maximum bufferlength gives max info */
762 scb->tsb_adr = isa_virt_to_bus(tsb);
763 /* issue scb to passed ldn, and busy wait for interrupt */
764 got_interrupt(host_index) = 0;
765 issue_cmd(host_index, isa_virt_to_bus(scb), IM_SCB | ldn);
766 while (!got_interrupt(host_index))
769 /*if command succesful, break */
770 if ((stat_result(host_index) == IM_SCB_CMD_COMPLETED) || (stat_result(host_index) == IM_SCB_CMD_COMPLETED_WITH_RETRIES))
773 /*if all three retries failed, return "no device at this ldn" */
780 static int read_capacity(int host_index, int ldn)
787 scb = &(ld(host_index)[ldn].scb);
788 tsb = &(ld(host_index)[ldn].tsb);
789 buf = (unsigned char *) (&(ld(host_index)[ldn].buf));
790 ld(host_index)[ldn].tsb.dev_status = 0;
791 for (retr = 0; retr < 3; retr++) {
792 /*fill scb with read capacity command */
793 scb->command = IM_READ_CAPACITY_CMD;
794 scb->enable = IM_REPORT_TSB_ONLY_ON_ERROR | IM_READ_CONTROL | IM_RETRY_ENABLE | IM_BYPASS_BUFFER;
795 last_scsi_command(host_index)[ldn] = IM_READ_CAPACITY_CMD;
796 last_scsi_type(host_index)[ldn] = IM_SCB;
797 scb->sys_buf_adr = isa_virt_to_bus(buf);
798 scb->sys_buf_length = 8;
799 scb->tsb_adr = isa_virt_to_bus(tsb);
800 /*issue scb to passed ldn, and busy wait for interrupt */
801 got_interrupt(host_index) = 0;
802 issue_cmd(host_index, isa_virt_to_bus(scb), IM_SCB | ldn);
803 while (!got_interrupt(host_index))
806 /*if got capacity, get block length and return one device found */
807 if ((stat_result(host_index) == IM_SCB_CMD_COMPLETED) || (stat_result(host_index) == IM_SCB_CMD_COMPLETED_WITH_RETRIES))
810 /*if all three retries failed, return "no device at this ldn" */
817 static int get_pos_info(int host_index)
824 scb = &(ld(host_index)[MAX_LOG_DEV].scb);
825 tsb = &(ld(host_index)[MAX_LOG_DEV].tsb);
826 buf = (unsigned char *) (&(ld(host_index)[MAX_LOG_DEV].buf));
827 ld(host_index)[MAX_LOG_DEV].tsb.dev_status = 0;
828 for (retr = 0; retr < 3; retr++) {
829 /*fill scb with get_pos_info command */
830 scb->command = IM_GET_POS_INFO_CMD;
831 scb->enable = IM_READ_CONTROL | IM_REPORT_TSB_ONLY_ON_ERROR | IM_RETRY_ENABLE | IM_BYPASS_BUFFER;
832 last_scsi_command(host_index)[MAX_LOG_DEV] = IM_GET_POS_INFO_CMD;
833 last_scsi_type(host_index)[MAX_LOG_DEV] = IM_SCB;
834 scb->sys_buf_adr = isa_virt_to_bus(buf);
835 if (special(host_index) == IBM_SCSI2_FW)
836 scb->sys_buf_length = 256; /* get all info from F/W adapter */
838 scb->sys_buf_length = 18; /* get exactly 18 bytes for other SCSI */
839 scb->tsb_adr = isa_virt_to_bus(tsb);
840 /*issue scb to ldn=15, and busy wait for interrupt */
841 got_interrupt(host_index) = 0;
842 issue_cmd(host_index, isa_virt_to_bus(scb), IM_SCB | MAX_LOG_DEV);
845 while (!got_interrupt(host_index))
848 /*if got POS-stuff, get block length and return one device found */
849 if ((stat_result(host_index) == IM_SCB_CMD_COMPLETED) || (stat_result(host_index) == IM_SCB_CMD_COMPLETED_WITH_RETRIES))
852 /* if all three retries failed, return "no device at this ldn" */
859 /* SCSI-immediate-command for assign. This functions maps/unmaps specific
860 ldn-numbers on SCSI (PUN,LUN). It is needed for presetting of the
861 subsystem and for dynamical remapping od ldns. */
862 static int immediate_assign(int host_index, unsigned int pun, unsigned int lun, unsigned int ldn, unsigned int operation)
865 unsigned long imm_cmd;
867 for (retr = 0; retr < 3; retr++) {
868 /* select mutation level of the SCSI-adapter */
869 switch (special(host_index)) {
871 imm_cmd = (unsigned long) (IM_ASSIGN_IMM_CMD);
872 imm_cmd |= (unsigned long) ((lun & 7) << 24);
873 imm_cmd |= (unsigned long) ((operation & 1) << 23);
874 imm_cmd |= (unsigned long) ((pun & 7) << 20) | ((pun & 8) << 24);
875 imm_cmd |= (unsigned long) ((ldn & 15) << 16);
878 imm_cmd = inl(IM_CMD_REG(host_index));
879 imm_cmd &= (unsigned long) (0xF8000000); /* keep reserved bits */
880 imm_cmd |= (unsigned long) (IM_ASSIGN_IMM_CMD);
881 imm_cmd |= (unsigned long) ((lun & 7) << 24);
882 imm_cmd |= (unsigned long) ((operation & 1) << 23);
883 imm_cmd |= (unsigned long) ((pun & 7) << 20);
884 imm_cmd |= (unsigned long) ((ldn & 15) << 16);
887 last_scsi_command(host_index)[MAX_LOG_DEV] = IM_ASSIGN_IMM_CMD;
888 last_scsi_type(host_index)[MAX_LOG_DEV] = IM_IMM_CMD;
889 got_interrupt(host_index) = 0;
890 issue_cmd(host_index, (unsigned long) (imm_cmd), IM_IMM_CMD | MAX_LOG_DEV);
891 while (!got_interrupt(host_index))
894 /*if command succesful, break */
895 if (stat_result(host_index) == IM_IMMEDIATE_CMD_COMPLETED)
904 static int immediate_feature(int host_index, unsigned int speed, unsigned int timeout)
907 unsigned long imm_cmd;
909 for (retr = 0; retr < 3; retr++) {
910 /* select mutation level of the SCSI-adapter */
911 imm_cmd = IM_FEATURE_CTR_IMM_CMD;
912 imm_cmd |= (unsigned long) ((speed & 0x7) << 29);
913 imm_cmd |= (unsigned long) ((timeout & 0x1fff) << 16);
914 last_scsi_command(host_index)[MAX_LOG_DEV] = IM_FEATURE_CTR_IMM_CMD;
915 last_scsi_type(host_index)[MAX_LOG_DEV] = IM_IMM_CMD;
916 got_interrupt(host_index) = 0;
917 /* we need to run into command errors in order to probe for the
919 global_command_error_excuse = 1;
920 issue_cmd(host_index, (unsigned long) (imm_cmd), IM_IMM_CMD | MAX_LOG_DEV);
923 while (!got_interrupt(host_index))
925 if (global_command_error_excuse == CMD_FAIL) {
926 global_command_error_excuse = 0;
929 global_command_error_excuse = 0;
930 /*if command succesful, break */
931 if (stat_result(host_index) == IM_IMMEDIATE_CMD_COMPLETED)
940 #ifdef CONFIG_IBMMCA_SCSI_DEV_RESET
941 static int immediate_reset(int host_index, unsigned int ldn)
945 unsigned long imm_command;
947 for (retries = 0; retries < 3; retries++) {
948 imm_command = inl(IM_CMD_REG(host_index));
949 imm_command &= (unsigned long) (0xFFFF0000); /* keep reserved bits */
950 imm_command |= (unsigned long) (IM_RESET_IMM_CMD);
951 last_scsi_command(host_index)[ldn] = IM_RESET_IMM_CMD;
952 last_scsi_type(host_index)[ldn] = IM_IMM_CMD;
953 got_interrupt(host_index) = 0;
954 reset_status(host_index) = IM_RESET_IN_PROGRESS;
955 issue_cmd(host_index, (unsigned long) (imm_command), IM_IMM_CMD | ldn);
956 ticks = IM_RESET_DELAY * HZ;
957 while (reset_status(host_index) == IM_RESET_IN_PROGRESS && --ticks) {
958 udelay((1 + 999 / HZ) * 1000);
961 /* if reset did not complete, just complain */
963 printk(KERN_ERR "IBM MCA SCSI: reset did not complete within %d seconds.\n", IM_RESET_DELAY);
964 reset_status(host_index) = IM_RESET_FINISHED_OK;
965 /* did not work, finish */
968 /*if command succesful, break */
969 if (stat_result(host_index) == IM_IMMEDIATE_CMD_COMPLETED)
979 /* type-interpreter for physical device numbers */
980 static char *ti_p(int dev)
983 case TYPE_IBM_SCSI_ADAPTER:
999 case TYPE_MEDIUM_CHANGER:
1002 return ("+"); /* show NO_LUN */
1004 return ("-"); /* TYPE_NO_DEVICE and others */
1007 /* interpreter for logical device numbers (ldn) */
1008 static char *ti_l(int val)
1010 const char hex[16] = "0123456789abcdef";
1011 static char answer[2];
1013 answer[1] = (char) (0x0);
1014 if (val <= MAX_LOG_DEV)
1015 answer[0] = hex[val];
1018 return (char *) &answer;
1021 /* transfers bitpattern of the feature command to values in MHz */
1022 static char *ibmrate(unsigned int speed, int i)
1026 return i ? "5.00" : "10.00";
1028 return i ? "4.00" : "8.00";
1030 return i ? "3.33" : "6.66";
1032 return i ? "2.86" : "5.00";
1034 return i ? "2.50" : "4.00";
1036 return i ? "2.22" : "3.10";
1038 return i ? "2.00" : "2.50";
1040 return i ? "1.82" : "2.00";
1045 static int probe_display(int what)
1047 static int rotator = 0;
1048 const char rotor[] = "|/-\\";
1050 if (!(display_mode & LED_DISP))
1053 outl(0x20202020, MOD95_LED_PORT);
1054 outl(0x20202020, MOD95_LED_PORT + 4);
1056 outb('S', MOD95_LED_PORT + 7);
1057 outb('C', MOD95_LED_PORT + 6);
1058 outb('S', MOD95_LED_PORT + 5);
1059 outb('I', MOD95_LED_PORT + 4);
1060 outb('i', MOD95_LED_PORT + 3);
1061 outb('n', MOD95_LED_PORT + 2);
1062 outb('i', MOD95_LED_PORT + 1);
1063 outb((char) (rotor[rotator]), MOD95_LED_PORT);
1071 static int probe_bus_mode(int host_index)
1073 struct im_pos_info *info;
1077 info = (struct im_pos_info *) (&(ld(host_index)[MAX_LOG_DEV].buf));
1078 if (get_pos_info(host_index)) {
1079 if (info->connector_size & 0xf000)
1080 subsystem_connector_size(host_index) = 16;
1082 subsystem_connector_size(host_index) = 32;
1083 num_bus |= (info->pos_4b & 8) >> 3;
1084 for (ldn = 0; ldn <= MAX_LOG_DEV; ldn++) {
1085 if ((special(host_index) == IBM_SCSI_WCACHE) || (special(host_index) == IBM_7568_WCACHE)) {
1086 if (!((info->cache_stat >> ldn) & 1))
1087 ld(host_index)[ldn].cache_flag = 0;
1089 if (!((info->retry_stat >> ldn) & 1))
1090 ld(host_index)[ldn].retry_flag = 0;
1092 #ifdef IM_DEBUG_PROBE
1093 printk("IBM MCA SCSI: SCSI-Cache bits: ");
1094 for (ldn = 0; ldn <= MAX_LOG_DEV; ldn++) {
1095 printk("%d", ld(host_index)[ldn].cache_flag);
1097 printk("\nIBM MCA SCSI: SCSI-Retry bits: ");
1098 for (ldn = 0; ldn <= MAX_LOG_DEV; ldn++) {
1099 printk("%d", ld(host_index)[ldn].retry_flag);
1107 /* probing scsi devices */
1108 static void check_devices(int host_index, int adaptertype)
1110 int id, lun, ldn, ticks;
1111 int count_devices; /* local counter for connected device */
1114 int speedrun; /* local adapter_speed check variable */
1116 /* assign default values to certain variables */
1119 IBM_DS(host_index).dyn_flag = 0; /* normally no need for dynamical ldn management */
1120 IBM_DS(host_index).total_errors = 0; /* set errorcounter to 0 */
1121 next_ldn(host_index) = 7; /* next ldn to be assigned is 7, because 0-6 is 'hardwired' */
1123 /* initialize the very important driver-informational arrays/structs */
1124 memset(ld(host_index), 0, sizeof(ld(host_index)));
1125 for (ldn = 0; ldn <= MAX_LOG_DEV; ldn++) {
1126 last_scsi_command(host_index)[ldn] = NO_SCSI; /* emptify last SCSI-command storage */
1127 last_scsi_type(host_index)[ldn] = 0;
1128 ld(host_index)[ldn].cache_flag = 1;
1129 ld(host_index)[ldn].retry_flag = 1;
1131 memset(get_ldn(host_index), TYPE_NO_DEVICE, sizeof(get_ldn(host_index))); /* this is essential ! */
1132 memset(get_scsi(host_index), TYPE_NO_DEVICE, sizeof(get_scsi(host_index))); /* this is essential ! */
1133 for (lun = 0; lun < 8; lun++) {
1134 /* mark the adapter at its pun on all luns */
1135 get_scsi(host_index)[subsystem_pun(host_index)][lun] = TYPE_IBM_SCSI_ADAPTER;
1136 get_ldn(host_index)[subsystem_pun(host_index)][lun] = MAX_LOG_DEV; /* make sure, the subsystem
1137 ldn is active for all
1140 probe_display(0); /* Supercool display usage during SCSI-probing. */
1141 /* This makes sense, when booting without any */
1142 /* monitor connected on model XX95. */
1145 adapter_speed(host_index) = global_adapter_speed;
1146 speedrun = adapter_speed(host_index);
1147 while (immediate_feature(host_index, speedrun, adapter_timeout) == 2) {
1150 panic("IBM MCA SCSI: Cannot set Synchronous-Transfer-Rate!\n");
1155 adapter_speed(host_index) = speedrun;
1156 /* Get detailed information about the current adapter, necessary for
1157 * device operations: */
1158 num_bus = probe_bus_mode(host_index);
1160 /* num_bus contains only valid data for the F/W adapter! */
1161 if (adaptertype == IBM_SCSI2_FW) { /* F/W SCSI adapter: */
1162 /* F/W adapter PUN-space extension evaluation: */
1164 printk(KERN_INFO "IBM MCA SCSI: Separate bus mode (wide-addressing enabled)\n");
1165 subsystem_maxid(host_index) = 16;
1167 printk(KERN_INFO "IBM MCA SCSI: Combined bus mode (wide-addressing disabled)\n");
1168 subsystem_maxid(host_index) = 8;
1170 printk(KERN_INFO "IBM MCA SCSI: Sync.-Rate (F/W: 20, Int.: 10, Ext.: %s) MBytes/s\n", ibmrate(speedrun, adaptertype));
1171 } else /* all other IBM SCSI adapters: */
1172 printk(KERN_INFO "IBM MCA SCSI: Synchronous-SCSI-Transfer-Rate: %s MBytes/s\n", ibmrate(speedrun, adaptertype));
1174 /* assign correct PUN device space */
1175 max_pun = subsystem_maxid(host_index);
1177 #ifdef IM_DEBUG_PROBE
1178 printk("IBM MCA SCSI: Current SCSI-host index: %d\n", host_index);
1179 printk("IBM MCA SCSI: Removing default logical SCSI-device mapping.");
1181 printk(KERN_INFO "IBM MCA SCSI: Dev. Order: %s, Mapping (takes <2min): ", (ibm_ansi_order) ? "ANSI" : "New");
1183 for (ldn = 0; ldn < MAX_LOG_DEV; ldn++) {
1185 #ifdef IM_DEBUG_PROBE
1188 immediate_assign(host_index, 0, 0, ldn, REMOVE_LDN); /* remove ldn (wherever) */
1190 lun = 0; /* default lun is 0 */
1191 #ifndef IM_DEBUG_PROBE
1195 #ifdef IM_DEBUG_PROBE
1196 printk("\nIBM MCA SCSI: Scanning SCSI-devices.");
1198 for (id = 0; id < max_pun; id++)
1199 #ifdef CONFIG_SCSI_MULTI_LUN
1200 for (lun = 0; lun < 8; lun++)
1204 #ifdef IM_DEBUG_PROBE
1207 if (id != subsystem_pun(host_index)) {
1208 /* if pun is not the adapter: */
1209 /* set ldn=0 to pun,lun */
1210 immediate_assign(host_index, id, lun, PROBE_LDN, SET_LDN);
1211 if (device_inquiry(host_index, PROBE_LDN)) { /* probe device */
1212 get_scsi(host_index)[id][lun] = (unsigned char) (ld(host_index)[PROBE_LDN].buf[0]);
1213 /* entry, even for NO_LUN */
1214 if (ld(host_index)[PROBE_LDN].buf[0] != TYPE_NO_LUN)
1215 count_devices++; /* a existing device is found */
1218 immediate_assign(host_index, id, lun, PROBE_LDN, REMOVE_LDN);
1221 #ifndef IM_DEBUG_PROBE
1225 #ifdef IM_DEBUG_PROBE
1226 printk("\nIBM MCA SCSI: Mapping SCSI-devices.");
1230 #ifdef CONFIG_SCSI_MULTI_LUN
1231 for (lun = 0; lun < 8 && ldn < MAX_LOG_DEV; lun++)
1233 for (id = 0; id < max_pun && ldn < MAX_LOG_DEV; id++) {
1235 #ifdef IM_DEBUG_PROBE
1238 if (id != subsystem_pun(host_index)) {
1239 if (get_scsi(host_index)[id][lun] != TYPE_NO_LUN && get_scsi(host_index)[id][lun] != TYPE_NO_DEVICE) {
1240 /* Only map if accepted type. Always enter for
1241 lun == 0 to get no gaps into ldn-mapping for ldn<7. */
1242 immediate_assign(host_index, id, lun, ldn, SET_LDN);
1243 get_ldn(host_index)[id][lun] = ldn; /* map ldn */
1244 if (device_exists(host_index, ldn, &ld(host_index)[ldn].block_length, &ld(host_index)[ldn].device_type)) {
1245 #ifdef CONFIG_IBMMCA_SCSI_DEV_RESET
1246 printk("resetting device at ldn=%x ... ", ldn);
1247 immediate_reset(host_index, ldn);
1251 /* device vanished, probably because we don't know how to
1252 * handle it or because it has problems */
1254 /* remove mapping */
1255 get_ldn(host_index)[id][lun] = TYPE_NO_DEVICE;
1256 immediate_assign(host_index, 0, 0, ldn, REMOVE_LDN);
1260 } else if (lun == 0) {
1261 /* map lun == 0, even if no device exists */
1262 immediate_assign(host_index, id, lun, ldn, SET_LDN);
1263 get_ldn(host_index)[id][lun] = ldn; /* map ldn */
1270 /* map remaining ldns to non-existing devices */
1271 for (lun = 1; lun < 8 && ldn < MAX_LOG_DEV; lun++)
1272 for (id = 0; id < max_pun && ldn < MAX_LOG_DEV; id++) {
1273 if (get_scsi(host_index)[id][lun] == TYPE_NO_LUN || get_scsi(host_index)[id][lun] == TYPE_NO_DEVICE) {
1275 /* Map remaining ldns only to NON-existing pun,lun
1276 combinations to make sure an inquiry will fail.
1277 For MULTI_LUN, it is needed to avoid adapter autonome
1279 immediate_assign(host_index, id, lun, ldn, SET_LDN);
1280 get_ldn(host_index)[id][lun] = ldn;
1284 #ifndef IM_DEBUG_PROBE
1288 #ifdef IM_DEBUG_PROBE
1290 printk("IBM MCA SCSI: Device order: IBM/ANSI (pun=7 is first).\n");
1292 printk("IBM MCA SCSI: Device order: New Industry Standard (pun=0 is first).\n");
1295 #ifdef IM_DEBUG_PROBE
1296 /* Show the physical and logical mapping during boot. */
1297 printk("IBM MCA SCSI: Determined SCSI-device-mapping:\n");
1298 printk(" Physical SCSI-Device Map Logical SCSI-Device Map\n");
1299 printk("ID\\LUN 0 1 2 3 4 5 6 7 ID\\LUN 0 1 2 3 4 5 6 7\n");
1300 for (id = 0; id < max_pun; id++) {
1302 for (lun = 0; lun < 8; lun++)
1303 printk("%2s ", ti_p(get_scsi(host_index)[id][lun]));
1304 printk(" %2d ", id);
1305 for (lun = 0; lun < 8; lun++)
1306 printk("%2s ", ti_l(get_ldn(host_index)[id][lun]));
1311 /* assign total number of found SCSI-devices to the statistics struct */
1312 IBM_DS(host_index).total_scsi_devices = count_devices;
1314 /* decide for output in /proc-filesystem, if the configuration of
1315 SCSI-devices makes dynamical reassignment of devices necessary */
1316 if (count_devices >= MAX_LOG_DEV)
1317 IBM_DS(host_index).dyn_flag = 1; /* dynamical assignment is necessary */
1319 IBM_DS(host_index).dyn_flag = 0; /* dynamical assignment is not necessary */
1321 /* If no SCSI-devices are assigned, return 1 in order to cause message. */
1323 printk("IBM MCA SCSI: Warning: No SCSI-devices found/assigned!\n");
1325 /* reset the counters for statistics on the current adapter */
1326 IBM_DS(host_index).scbs = 0;
1327 IBM_DS(host_index).long_scbs = 0;
1328 IBM_DS(host_index).total_accesses = 0;
1329 IBM_DS(host_index).total_interrupts = 0;
1330 IBM_DS(host_index).dynamical_assignments = 0;
1331 memset(IBM_DS(host_index).ldn_access, 0x0, sizeof(IBM_DS(host_index).ldn_access));
1332 memset(IBM_DS(host_index).ldn_read_access, 0x0, sizeof(IBM_DS(host_index).ldn_read_access));
1333 memset(IBM_DS(host_index).ldn_write_access, 0x0, sizeof(IBM_DS(host_index).ldn_write_access));
1334 memset(IBM_DS(host_index).ldn_inquiry_access, 0x0, sizeof(IBM_DS(host_index).ldn_inquiry_access));
1335 memset(IBM_DS(host_index).ldn_modeselect_access, 0x0, sizeof(IBM_DS(host_index).ldn_modeselect_access));
1336 memset(IBM_DS(host_index).ldn_assignments, 0x0, sizeof(IBM_DS(host_index).ldn_assignments));
1341 static int device_exists(int host_index, int ldn, int *block_length, int *device_type)
1344 /* if no valid device found, return immediately with 0 */
1345 if (!(device_inquiry(host_index, ldn)))
1347 buf = (unsigned char *) (&(ld(host_index)[ldn].buf));
1348 if (*buf == TYPE_ROM) {
1349 *device_type = TYPE_ROM;
1350 *block_length = 2048; /* (standard blocksize for yellow-/red-book) */
1353 if (*buf == TYPE_WORM) {
1354 *device_type = TYPE_WORM;
1355 *block_length = 2048;
1358 if (*buf == TYPE_DISK) {
1359 *device_type = TYPE_DISK;
1360 if (read_capacity(host_index, ldn)) {
1361 *block_length = *(buf + 7) + (*(buf + 6) << 8) + (*(buf + 5) << 16) + (*(buf + 4) << 24);
1366 if (*buf == TYPE_MOD) {
1367 *device_type = TYPE_MOD;
1368 if (read_capacity(host_index, ldn)) {
1369 *block_length = *(buf + 7) + (*(buf + 6) << 8) + (*(buf + 5) << 16) + (*(buf + 4) << 24);
1374 if (*buf == TYPE_TAPE) {
1375 *device_type = TYPE_TAPE;
1376 *block_length = 0; /* not in use (setting by mt and mtst in op.) */
1379 if (*buf == TYPE_PROCESSOR) {
1380 *device_type = TYPE_PROCESSOR;
1381 *block_length = 0; /* they set their stuff on drivers */
1384 if (*buf == TYPE_SCANNER) {
1385 *device_type = TYPE_SCANNER;
1386 *block_length = 0; /* they set their stuff on drivers */
1389 if (*buf == TYPE_MEDIUM_CHANGER) {
1390 *device_type = TYPE_MEDIUM_CHANGER;
1391 *block_length = 0; /* One never knows, what to expect on a medium
1398 static void internal_ibmmca_scsi_setup(char *str, int *ints)
1400 int i, j, io_base, id_base;
1407 while ((token = strsep(&str, ",")) != NULL) {
1408 if (!strcmp(token, "activity"))
1409 display_mode |= LED_ACTIVITY;
1410 if (!strcmp(token, "display"))
1411 display_mode |= LED_DISP;
1412 if (!strcmp(token, "adisplay"))
1413 display_mode |= LED_ADISP;
1414 if (!strcmp(token, "normal"))
1416 if (!strcmp(token, "ansi"))
1418 if (!strcmp(token, "fast"))
1419 global_adapter_speed = 0;
1420 if (!strcmp(token, "medium"))
1421 global_adapter_speed = 4;
1422 if (!strcmp(token, "slow"))
1423 global_adapter_speed = 7;
1424 if ((*token == '-') || (isdigit(*token))) {
1425 if (!(j % 2) && (io_base < IM_MAX_HOSTS))
1426 io_port[io_base++] = simple_strtoul(token, NULL, 0);
1427 if ((j % 2) && (id_base < IM_MAX_HOSTS))
1428 scsi_id[id_base++] = simple_strtoul(token, NULL, 0);
1433 for (i = 0; i < IM_MAX_HOSTS && 2 * i + 2 < ints[0]; i++) {
1434 io_port[i] = ints[2 * i + 2];
1435 scsi_id[i] = ints[2 * i + 2];
1441 static int ibmmca_getinfo(char *buf, int slot, void *dev_id)
1443 struct Scsi_Host *shpnt;
1444 int len, speciale, connectore, k;
1445 unsigned int pos[8];
1446 unsigned long flags;
1447 struct Scsi_Host *dev = dev_id;
1449 spin_lock_irqsave(dev->host_lock, flags);
1451 shpnt = dev; /* assign host-structure to local pointer */
1452 len = 0; /* set filled text-buffer index to 0 */
1453 /* get the _special contents of the hostdata structure */
1454 speciale = ((struct ibmmca_hostdata *) shpnt->hostdata)->_special;
1455 connectore = ((struct ibmmca_hostdata *) shpnt->hostdata)->_connector_size;
1456 for (k = 2; k < 4; k++)
1457 pos[k] = ((struct ibmmca_hostdata *) shpnt->hostdata)->_pos[k];
1458 if (speciale == FORCED_DETECTION) { /* forced detection */
1459 len += sprintf(buf + len,
1460 "Adapter category: forced detected\n" "***************************************\n" "*** Forced detected SCSI Adapter ***\n" "*** No chip-information available ***\n" "***************************************\n");
1461 } else if (speciale == INTEGRATED_SCSI) {
1462 /* if the integrated subsystem has been found automatically: */
1463 len += sprintf(buf + len,
1464 "Adapter category: integrated\n" "Chip revision level: %d\n" "Chip status: %s\n" "8 kByte NVRAM status: %s\n", ((pos[2] & 0xf0) >> 4), (pos[2] & 1) ? "enabled" : "disabled", (pos[2] & 2) ? "locked" : "accessible");
1465 } else if ((speciale >= 0) && (speciale < (sizeof(subsys_list) / sizeof(struct subsys_list_struct)))) {
1466 /* if the subsystem is a slot adapter */
1467 len += sprintf(buf + len, "Adapter category: slot-card\n" "ROM Segment Address: ");
1468 if ((pos[2] & 0xf0) == 0xf0)
1469 len += sprintf(buf + len, "off\n");
1471 len += sprintf(buf + len, "0x%x\n", ((pos[2] & 0xf0) << 13) + 0xc0000);
1472 len += sprintf(buf + len, "Chip status: %s\n", (pos[2] & 1) ? "enabled" : "disabled");
1473 len += sprintf(buf + len, "Adapter I/O Offset: 0x%x\n", ((pos[2] & 0x0e) << 2));
1475 len += sprintf(buf + len, "Adapter category: unknown\n");
1477 /* common subsystem information to write to the slotn file */
1478 len += sprintf(buf + len, "Subsystem PUN: %d\n", shpnt->this_id);
1479 len += sprintf(buf + len, "I/O base address range: 0x%x-0x%x\n", (unsigned int) (shpnt->io_port), (unsigned int) (shpnt->io_port + 7));
1480 len += sprintf(buf + len, "MCA-slot size: %d bits", connectore);
1481 /* Now make sure, the bufferlength is devidable by 4 to avoid
1482 * paging problems of the buffer. */
1483 while (len % sizeof(int) != (sizeof(int) - 1))
1484 len += sprintf(buf + len, " ");
1485 len += sprintf(buf + len, "\n");
1487 spin_unlock_irqrestore(shpnt->host_lock, flags);
1492 int ibmmca_detect(Scsi_Host_Template * scsi_template)
1494 struct Scsi_Host *shpnt;
1495 int port, id, i, j, k, list_size, slot;
1496 int devices_on_irq_11 = 0;
1497 int devices_on_irq_14 = 0;
1498 int IRQ14_registered = 0;
1499 int IRQ11_registered = 0;
1501 found = 0; /* make absolutely sure, that found is set to 0 */
1503 /* First of all, print the version number of the driver. This is
1504 * important to allow better user bugreports in case of already
1505 * having problems with the MCA_bus probing. */
1506 printk(KERN_INFO "IBM MCA SCSI: Version %s\n", IBMMCA_SCSI_DRIVER_VERSION);
1507 /* if this is not MCA machine, return "nothing found" */
1509 printk(KERN_INFO "IBM MCA SCSI: No Microchannel-bus present --> Aborting.\n" " This machine does not have any IBM MCA-bus\n" " or the MCA-Kernel-support is not enabled!\n");
1514 /* If the driver is run as module, read from conf.modules or cmd-line */
1516 option_setup(boot_options);
1519 /* get interrupt request level */
1520 if (request_irq(IM_IRQ, interrupt_handler, SA_SHIRQ, "ibmmcascsi", hosts)) {
1521 printk(KERN_ERR "IBM MCA SCSI: Unable to get shared IRQ %d.\n", IM_IRQ);
1526 /* if ibmmcascsi setup option was passed to kernel, return "found" */
1527 for (i = 0; i < IM_MAX_HOSTS; i++)
1528 if (io_port[i] > 0 && scsi_id[i] >= 0 && scsi_id[i] < 8) {
1529 printk("IBM MCA SCSI: forced detected SCSI Adapter, io=0x%x, scsi id=%d.\n", io_port[i], scsi_id[i]);
1530 if ((shpnt = ibmmca_register(scsi_template, io_port[i], scsi_id[i], FORCED_DETECTION, "forced detected SCSI Adapter"))) {
1531 for (k = 2; k < 7; k++)
1532 ((struct ibmmca_hostdata *) shpnt->hostdata)->_pos[k] = 0;
1533 ((struct ibmmca_hostdata *) shpnt->hostdata)->_special = FORCED_DETECTION;
1534 mca_set_adapter_name(MCA_INTEGSCSI, "forced detected SCSI Adapter");
1535 mca_set_adapter_procfn(MCA_INTEGSCSI, (MCA_ProcFn) ibmmca_getinfo, shpnt);
1536 mca_mark_as_used(MCA_INTEGSCSI);
1537 devices_on_irq_14++;
1543 /* The POS2-register of all PS/2 model SCSI-subsystems has the following
1544 * interpretation of bits:
1545 * Bit 7 - 4 : Chip Revision ID (Release)
1546 * Bit 3 - 2 : Reserved
1547 * Bit 1 : 8k NVRAM Disabled
1548 * Bit 0 : Chip Enable (EN-Signal)
1549 * The POS3-register is interpreted as follows:
1550 * Bit 7 - 5 : SCSI ID
1551 * Bit 4 : Reserved = 0
1552 * Bit 3 - 0 : Reserved = 0
1553 * (taken from "IBM, PS/2 Hardware Interface Technical Reference, Common
1554 * Interfaces (1991)").
1555 * In short words, this means, that IBM PS/2 machines only support
1556 * 1 single subsystem by default. The slot-adapters must have another
1557 * configuration on pos2. Here, one has to assume the following
1558 * things for POS2-register:
1559 * Bit 7 - 4 : Chip Revision ID (Release)
1560 * Bit 3 - 1 : port offset factor
1561 * Bit 0 : Chip Enable (EN-Signal)
1562 * As I found a patch here, setting the IO-registers to 0x3540 forced,
1563 * as there was a 0x05 in POS2 on a model 56, I assume, that the
1564 * port 0x3540 must be fix for integrated SCSI-controllers.
1565 * Ok, this discovery leads to the following implementation: (M.Lang) */
1567 /* first look for the IBM SCSI integrated subsystem on the motherboard */
1568 for (j = 0; j < 8; j++) /* read the pos-information */
1569 pos[j] = mca_read_stored_pos(MCA_INTEGSCSI, j);
1570 /* pos2 = pos3 = 0xff if there is no integrated SCSI-subsystem present, but
1571 * if we ignore the settings of all surrounding pos registers, it is not
1572 * completely sufficient to only check pos2 and pos3. */
1573 /* Therefore, now the following if statement is used to
1574 * make sure, we see a real integrated onboard SCSI-interface and no
1575 * internal system information, which gets mapped to some pos registers
1576 * on models 95xx. */
1577 if ((!pos[0] && !pos[1] && pos[2] > 0 && pos[3] > 0 && !pos[4] && !pos[5] && !pos[6] && !pos[7]) || (pos[0] == 0xff && pos[1] == 0xff && pos[2] < 0xff && pos[3] < 0xff && pos[4] == 0xff && pos[5] == 0xff && pos[6] == 0xff && pos[7] == 0xff)) {
1578 if ((pos[2] & 1) == 1) /* is the subsystem chip enabled ? */
1580 else { /* if disabled, no IRQs will be generated, as the chip won't
1581 * listen to the incoming commands and will do really nothing,
1582 * except for listening to the pos-register settings. If this
1583 * happens, I need to hugely think about it, as one has to
1584 * write something to the MCA-Bus pos register in order to
1585 * enable the chip. Normally, IBM-SCSI won't pass the POST,
1586 * when the chip is disabled (see IBM tech. ref.). */
1587 port = IM_IO_PORT; /* anyway, set the portnumber and warn */
1588 printk("IBM MCA SCSI: WARNING - Your SCSI-subsystem is disabled!\n" " SCSI-operations may not work.\n");
1590 id = (pos[3] & 0xe0) >> 5; /* this is correct and represents the PUN */
1591 /* give detailed information on the subsystem. This helps me
1592 * additionally during debugging and analyzing bug-reports. */
1593 printk(KERN_INFO "IBM MCA SCSI: IBM Integrated SCSI Controller ffound, io=0x%x, scsi id=%d,\n", port, id);
1594 printk(KERN_INFO " chip rev.=%d, 8K NVRAM=%s, subsystem=%s\n", ((pos[2] & 0xf0) >> 4), (pos[2] & 2) ? "locked" : "accessible", (pos[2] & 1) ? "enabled." : "disabled.");
1596 /* register the found integrated SCSI-subsystem */
1597 if ((shpnt = ibmmca_register(scsi_template, port, id, INTEGRATED_SCSI, "IBM Integrated SCSI Controller")))
1599 for (k = 2; k < 7; k++)
1600 ((struct ibmmca_hostdata *) shpnt->hostdata)->_pos[k] = pos[k];
1601 ((struct ibmmca_hostdata *) shpnt->hostdata)->_special = INTEGRATED_SCSI;
1602 mca_set_adapter_name(MCA_INTEGSCSI, "IBM Integrated SCSI Controller");
1603 mca_set_adapter_procfn(MCA_INTEGSCSI, (MCA_ProcFn) ibmmca_getinfo, shpnt);
1604 mca_mark_as_used(MCA_INTEGSCSI);
1605 devices_on_irq_14++;
1609 /* now look for other adapters in MCA slots, */
1610 /* determine the number of known IBM-SCSI-subsystem types */
1611 /* see the pos[2] dependence to get the adapter port-offset. */
1612 list_size = sizeof(subsys_list) / sizeof(struct subsys_list_struct);
1613 for (i = 0; i < list_size; i++) {
1614 /* scan each slot for a fitting adapter id */
1615 slot = 0; /* start at slot 0 */
1616 while ((slot = mca_find_adapter(subsys_list[i].mca_id, slot))
1617 != MCA_NOTFOUND) { /* scan through all slots */
1618 for (j = 0; j < 8; j++) /* read the pos-information */
1619 pos[j] = mca_read_stored_pos(slot, j);
1620 if ((pos[2] & 1) == 1)
1621 /* is the subsystem chip enabled ? */
1622 /* (explanations see above) */
1623 port = IM_IO_PORT + ((pos[2] & 0x0e) << 2);
1625 /* anyway, set the portnumber and warn */
1626 port = IM_IO_PORT + ((pos[2] & 0x0e) << 2);
1627 printk(KERN_WARNING "IBM MCA SCSI: WARNING - Your SCSI-subsystem is disabled!\n");
1628 printk(KERN_WARNING " SCSI-operations may not work.\n");
1630 if ((i == IBM_SCSI2_FW) && (pos[6] != 0)) {
1631 printk(KERN_ERR "IBM MCA SCSI: ERROR - Wrong POS(6)-register setting!\n");
1632 printk(KERN_ERR " Impossible to determine adapter PUN!\n");
1633 printk(KERN_ERR " Guessing adapter PUN = 7.\n");
1636 id = (pos[3] & 0xe0) >> 5; /* get subsystem PUN */
1637 if (i == IBM_SCSI2_FW) {
1638 id |= (pos[3] & 0x10) >> 1; /* get subsystem PUN high-bit
1639 * for F/W adapters */
1642 if ((i == IBM_SCSI2_FW) && (pos[4] & 0x01) && (pos[6] == 0)) {
1643 /* IRQ11 is used by SCSI-2 F/W Adapter/A */
1644 printk(KERN_DEBUG "IBM MCA SCSI: SCSI-2 F/W adapter needs IRQ 11.\n");
1645 /* get interrupt request level */
1646 if (request_irq(IM_IRQ_FW, interrupt_handler, SA_SHIRQ, "ibmmcascsi", hosts)) {
1647 printk(KERN_ERR "IBM MCA SCSI: Unable to get shared IRQ %d.\n", IM_IRQ_FW);
1651 printk(KERN_INFO "IBM MCA SCSI: %s found in slot %d, io=0x%x, scsi id=%d,\n", subsys_list[i].description, slot + 1, port, id);
1652 if ((pos[2] & 0xf0) == 0xf0)
1653 printk(KERN_DEBUG" ROM Addr.=off,");
1655 printk(KERN_DEBUG " ROM Addr.=0x%x,", ((pos[2] & 0xf0) << 13) + 0xc0000);
1656 printk(KERN_DEBUG " port-offset=0x%x, subsystem=%s\n", ((pos[2] & 0x0e) << 2), (pos[2] & 1) ? "enabled." : "disabled.");
1658 /* register the hostadapter */
1659 if ((shpnt = ibmmca_register(scsi_template, port, id, i, subsys_list[i].description))) {
1660 for (k = 2; k < 8; k++)
1661 ((struct ibmmca_hostdata *) shpnt->hostdata)->_pos[k] = pos[k];
1662 ((struct ibmmca_hostdata *) shpnt->hostdata)->_special = i;
1663 mca_set_adapter_name(slot, subsys_list[i].description);
1664 mca_set_adapter_procfn(slot, (MCA_ProcFn) ibmmca_getinfo, shpnt);
1665 mca_mark_as_used(slot);
1666 if ((i == IBM_SCSI2_FW) && (pos[4] & 0x01) && (pos[6] == 0))
1667 devices_on_irq_11++;
1669 devices_on_irq_14++;
1671 slot++; /* advance to next slot */
1672 } /* advance to next adapter id in the list of IBM-SCSI-subsystems */
1675 /* now check for SCSI-adapters, mapped to the integrated SCSI
1676 * area. E.g. a W/Cache in MCA-slot 9(!). Do the check correct here,
1677 * as this is a known effect on some models 95xx. */
1678 list_size = sizeof(subsys_list) / sizeof(struct subsys_list_struct);
1679 for (i = 0; i < list_size; i++) {
1680 /* scan each slot for a fitting adapter id */
1681 slot = mca_find_adapter(subsys_list[i].mca_id, MCA_INTEGSCSI);
1682 if (slot != MCA_NOTFOUND) { /* scan through all slots */
1683 for (j = 0; j < 8; j++) /* read the pos-information */
1684 pos[j] = mca_read_stored_pos(slot, j);
1685 if ((pos[2] & 1) == 1) { /* is the subsystem chip enabled ? */
1686 /* (explanations see above) */
1687 port = IM_IO_PORT + ((pos[2] & 0x0e) << 2);
1688 } else { /* anyway, set the portnumber and warn */
1689 port = IM_IO_PORT + ((pos[2] & 0x0e) << 2);
1690 printk(KERN_WARNING "IBM MCA SCSI: WARNING - Your SCSI-subsystem is disabled!\n");
1691 printk(KERN_WARNING " SCSI-operations may not work.\n");
1693 if ((i == IBM_SCSI2_FW) && (pos[6] != 0)) {
1694 printk(KERN_ERR "IBM MCA SCSI: ERROR - Wrong POS(6)-register setting!\n");
1695 printk(KERN_ERR " Impossible to determine adapter PUN!\n");
1696 printk(KERN_ERR " Guessing adapter PUN = 7.\n");
1699 id = (pos[3] & 0xe0) >> 5; /* get subsystem PUN */
1700 if (i == IBM_SCSI2_FW)
1701 id |= (pos[3] & 0x10) >> 1; /* get subsystem PUN high-bit
1702 * for F/W adapters */
1704 if ((i == IBM_SCSI2_FW) && (pos[4] & 0x01) && (pos[6] == 0)) {
1705 /* IRQ11 is used by SCSI-2 F/W Adapter/A */
1706 printk(KERN_DEBUG "IBM MCA SCSI: SCSI-2 F/W adapter needs IRQ 11.\n");
1707 /* get interrupt request level */
1708 if (request_irq(IM_IRQ_FW, interrupt_handler, SA_SHIRQ, "ibmmcascsi", hosts))
1709 printk(KERN_ERR "IBM MCA SCSI: Unable to get shared IRQ %d.\n", IM_IRQ_FW);
1713 printk(KERN_INFO "IBM MCA SCSI: %s found in slot %d, io=0x%x, scsi id=%d,\n", subsys_list[i].description, slot + 1, port, id);
1714 if ((pos[2] & 0xf0) == 0xf0)
1715 printk(KERN_DEBUG " ROM Addr.=off,");
1717 printk(KERN_DEBUG " ROM Addr.=0x%x,", ((pos[2] & 0xf0) << 13) + 0xc0000);
1718 printk(KERN_DEBUG " port-offset=0x%x, subsystem=%s\n", ((pos[2] & 0x0e) << 2), (pos[2] & 1) ? "enabled." : "disabled.");
1720 /* register the hostadapter */
1721 if ((shpnt = ibmmca_register(scsi_template, port, id, i, subsys_list[i].description))) {
1722 for (k = 2; k < 7; k++)
1723 ((struct ibmmca_hostdata *) shpnt->hostdata)->_pos[k] = pos[k];
1724 ((struct ibmmca_hostdata *) shpnt->hostdata)->_special = i;
1725 mca_set_adapter_name(slot, subsys_list[i].description);
1726 mca_set_adapter_procfn(slot, (MCA_ProcFn) ibmmca_getinfo, shpnt);
1727 mca_mark_as_used(slot);
1728 if ((i == IBM_SCSI2_FW) && (pos[4] & 0x01) && (pos[6] == 0))
1729 devices_on_irq_11++;
1731 devices_on_irq_14++;
1733 slot++; /* advance to next slot */
1734 } /* advance to next adapter id in the list of IBM-SCSI-subsystems */
1736 if (IRQ11_registered && !devices_on_irq_11)
1737 free_irq(IM_IRQ_FW, hosts); /* no devices on IRQ 11 */
1738 if (IRQ14_registered && !devices_on_irq_14)
1739 free_irq(IM_IRQ, hosts); /* no devices on IRQ 14 */
1740 if (!devices_on_irq_11 && !devices_on_irq_14)
1741 printk(KERN_WARNING "IBM MCA SCSI: No IBM SCSI-subsystem adapter attached.\n");
1742 return found; /* return the number of found SCSI hosts. Should be 1 or 0. */
1745 static struct Scsi_Host *ibmmca_register(Scsi_Host_Template * scsi_template, int port, int id, int adaptertype, char *hostname)
1747 struct Scsi_Host *shpnt;
1751 /* check I/O region */
1752 if (!request_region(port, IM_N_IO_PORT, hostname)) {
1753 printk(KERN_ERR "IBM MCA SCSI: Unable to get I/O region 0x%x-0x%x (%d ports).\n", port, port + IM_N_IO_PORT - 1, IM_N_IO_PORT);
1758 shpnt = scsi_register(scsi_template, sizeof(struct ibmmca_hostdata));
1760 printk(KERN_ERR "IBM MCA SCSI: Unable to register host.\n");
1761 release_region(port, IM_N_IO_PORT);
1765 /* request I/O region */
1766 hosts[found] = shpnt; /* add new found hostadapter to the list */
1767 special(found) = adaptertype; /* important assignment or else crash! */
1768 subsystem_connector_size(found) = 0; /* preset slot-size */
1769 shpnt->irq = IM_IRQ; /* assign necessary stuff for the adapter */
1770 shpnt->io_port = port;
1771 shpnt->n_io_port = IM_N_IO_PORT;
1772 shpnt->this_id = id;
1773 shpnt->max_id = 8; /* 8 PUNs are default */
1774 /* now, the SCSI-subsystem is connected to Linux */
1776 ctrl = (unsigned int) (inb(IM_CTR_REG(found))); /* get control-register status */
1777 #ifdef IM_DEBUG_PROBE
1778 printk("IBM MCA SCSI: Control Register contents: %x, status: %x\n", ctrl, inb(IM_STAT_REG(found)));
1779 printk("IBM MCA SCSI: This adapters' POS-registers: ");
1780 for (i = 0; i < 8; i++)
1781 printk("%x ", pos[i]);
1784 reset_status(found) = IM_RESET_NOT_IN_PROGRESS;
1786 for (i = 0; i < 16; i++) /* reset the tables */
1787 for (j = 0; j < 8; j++)
1788 get_ldn(found)[i][j] = MAX_LOG_DEV;
1790 /* check which logical devices exist */
1791 /* after this line, local interrupting is possible: */
1792 local_checking_phase_flag(found) = 1;
1793 check_devices(found, adaptertype); /* call by value, using the global variable hosts */
1794 local_checking_phase_flag(found) = 0;
1795 found++; /* now increase index to be prepared for next found subsystem */
1796 /* an ibm mca subsystem has been detected */
1800 static int ibmmca_release(struct Scsi_Host *shpnt)
1802 release_region(shpnt->io_port, shpnt->n_io_port);
1804 free_irq(shpnt->irq, hosts);
1808 /* The following routine is the SCSI command queue for the midlevel driver */
1809 static int ibmmca_queuecommand(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
1812 unsigned int scsi_cmd;
1814 struct Scsi_Host *shpnt;
1821 struct scatterlist *sl;
1823 shpnt = cmd->device->host;
1824 /* search for the right hostadapter */
1825 for (host_index = 0; hosts[host_index] && hosts[host_index]->host_no != shpnt->host_no; host_index++);
1827 if (!hosts[host_index]) { /* invalid hostadapter descriptor address */
1828 cmd->result = DID_NO_CONNECT << 16;
1833 max_pun = subsystem_maxid(host_index);
1834 if (ibm_ansi_order) {
1835 target = max_pun - 1 - cmd->device->id;
1836 if ((target <= subsystem_pun(host_index)) && (cmd->device->id <= subsystem_pun(host_index)))
1838 else if ((target >= subsystem_pun(host_index)) && (cmd->device->id >= subsystem_pun(host_index)))
1841 target = cmd->device->id;
1843 /* if (target,lun) is NO LUN or not existing at all, return error */
1844 if ((get_scsi(host_index)[target][cmd->device->lun] == TYPE_NO_LUN) || (get_scsi(host_index)[target][cmd->device->lun] == TYPE_NO_DEVICE)) {
1845 cmd->result = DID_NO_CONNECT << 16;
1851 /*if (target,lun) unassigned, do further checks... */
1852 ldn = get_ldn(host_index)[target][cmd->device->lun];
1853 if (ldn >= MAX_LOG_DEV) { /* on invalid ldn do special stuff */
1854 if (ldn > MAX_LOG_DEV) { /* dynamical remapping if ldn unassigned */
1855 current_ldn = next_ldn(host_index); /* stop-value for one circle */
1856 while (ld(host_index)[next_ldn(host_index)].cmd) { /* search for a occupied, but not in */
1857 /* command-processing ldn. */
1858 next_ldn(host_index)++;
1859 if (next_ldn(host_index) >= MAX_LOG_DEV)
1860 next_ldn(host_index) = 7;
1861 if (current_ldn == next_ldn(host_index)) { /* One circle done ? */
1862 /* no non-processing ldn found */
1863 printk("IBM MCA SCSI: Cannot assign SCSI-device dynamically!\n" " On ldn 7-14 SCSI-commands everywhere in progress.\n" " Reporting DID_NO_CONNECT for device (%d,%d).\n", target, cmd->device->lun);
1864 cmd->result = DID_NO_CONNECT << 16; /* return no connect */
1871 /* unmap non-processing ldn */
1872 for (id = 0; id < max_pun; id++)
1873 for (lun = 0; lun < 8; lun++) {
1874 if (get_ldn(host_index)[id][lun] == next_ldn(host_index)) {
1875 get_ldn(host_index)[id][lun] = TYPE_NO_DEVICE;
1876 get_scsi(host_index)[id][lun] = TYPE_NO_DEVICE;
1880 /* set reduced interrupt_handler-mode for checking */
1881 local_checking_phase_flag(host_index) = 1;
1882 /* map found ldn to pun,lun */
1883 get_ldn(host_index)[target][cmd->device->lun] = next_ldn(host_index);
1884 /* change ldn to the right value, that is now next_ldn */
1885 ldn = next_ldn(host_index);
1886 /* unassign all ldns (pun,lun,ldn does not matter for remove) */
1887 immediate_assign(host_index, 0, 0, 0, REMOVE_LDN);
1888 /* set only LDN for remapped device */
1889 immediate_assign(host_index, target, cmd->device->lun, ldn, SET_LDN);
1890 /* get device information for ld[ldn] */
1891 if (device_exists(host_index, ldn, &ld(host_index)[ldn].block_length, &ld(host_index)[ldn].device_type)) {
1892 ld(host_index)[ldn].cmd = NULL; /* To prevent panic set 0, because
1893 devices that were not assigned,
1894 should have nothing in progress. */
1895 get_scsi(host_index)[target][cmd->device->lun] = ld(host_index)[ldn].device_type;
1896 /* increase assignment counters for statistics in /proc */
1897 IBM_DS(host_index).dynamical_assignments++;
1898 IBM_DS(host_index).ldn_assignments[ldn]++;
1900 /* panic here, because a device, found at boottime has
1902 panic("IBM MCA SCSI: ldn=0x%x, SCSI-device on (%d,%d) vanished!\n", ldn, target, cmd->device->lun);
1903 /* unassign again all ldns (pun,lun,ldn does not matter for remove) */
1904 immediate_assign(host_index, 0, 0, 0, REMOVE_LDN);
1905 /* remap all ldns, as written in the pun/lun table */
1907 #ifdef CONFIG_SCSI_MULTI_LUN
1908 for (lun = 0; lun < 8; lun++)
1910 for (id = 0; id < max_pun; id++) {
1911 if (get_ldn(host_index)[id][lun] <= MAX_LOG_DEV)
1912 immediate_assign(host_index, id, lun, get_ldn(host_index)[id][lun], SET_LDN);
1914 /* set back to normal interrupt_handling */
1915 local_checking_phase_flag(host_index) = 0;
1916 #ifdef IM_DEBUG_PROBE
1917 /* Information on syslog terminal */
1918 printk("IBM MCA SCSI: ldn=0x%x dynamically reassigned to (%d,%d).\n", ldn, target, cmd->device->lun);
1920 /* increase next_ldn for next dynamical assignment */
1921 next_ldn(host_index)++;
1922 if (next_ldn(host_index) >= MAX_LOG_DEV)
1923 next_ldn(host_index) = 7;
1924 } else { /* wall against Linux accesses to the subsystem adapter */
1925 cmd->result = DID_BAD_TARGET << 16;
1932 /*verify there is no command already in progress for this log dev */
1933 if (ld(host_index)[ldn].cmd)
1934 panic("IBM MCA SCSI: cmd already in progress for this ldn.\n");
1936 /*save done in cmd, and save cmd for the interrupt handler */
1937 cmd->scsi_done = done;
1938 ld(host_index)[ldn].cmd = cmd;
1940 /*fill scb information independent of the scsi command */
1941 scb = &(ld(host_index)[ldn].scb);
1942 ld(host_index)[ldn].tsb.dev_status = 0;
1943 scb->enable = IM_REPORT_TSB_ONLY_ON_ERROR | IM_RETRY_ENABLE;
1944 scb->tsb_adr = isa_virt_to_bus(&(ld(host_index)[ldn].tsb));
1945 scsi_cmd = cmd->cmnd[0];
1949 sl = (struct scatterlist *) (cmd->request_buffer);
1951 panic("IBM MCA SCSI: scatter-gather list too long.\n");
1953 ld(host_index)[ldn].sge[i].address = (void *) (isa_page_to_bus(sl[i].page) + sl[i].offset);
1954 ld(host_index)[ldn].sge[i].byte_length = sl[i].length;
1956 scb->enable |= IM_POINTER_TO_LIST;
1957 scb->sys_buf_adr = isa_virt_to_bus(&(ld(host_index)[ldn].sge[0]));
1958 scb->sys_buf_length = cmd->use_sg * sizeof(struct im_sge);
1960 scb->sys_buf_adr = isa_virt_to_bus(cmd->request_buffer);
1961 /* recent Linux midlevel SCSI places 1024 byte for inquiry
1962 * command. Far too much for old PS/2 hardware. */
1964 /* avoid command errors by setting bufferlengths to
1965 * ANSI-standard. Beware of forcing it to 255,
1966 * this could SEGV the kernel!!! */
1971 if (cmd->request_bufflen > 255)
1972 scb->sys_buf_length = 255;
1974 scb->sys_buf_length = cmd->request_bufflen;
1976 case TEST_UNIT_READY:
1977 scb->sys_buf_length = 0;
1980 scb->sys_buf_length = cmd->request_bufflen;
1984 /*fill scb information dependent on scsi command */
1987 printk("issue scsi cmd=%02x to ldn=%d\n", scsi_cmd, ldn);
1990 /* for specific device-type debugging: */
1991 #ifdef IM_DEBUG_CMD_SPEC_DEV
1992 if (ld(host_index)[ldn].device_type == IM_DEBUG_CMD_DEVICE)
1993 printk("(SCSI-device-type=0x%x) issue scsi cmd=%02x to ldn=%d\n", ld(host_index)[ldn].device_type, scsi_cmd, ldn);
1996 /* for possible panics store current command */
1997 last_scsi_command(host_index)[ldn] = scsi_cmd;
1998 last_scsi_type(host_index)[ldn] = IM_SCB;
1999 /* update statistical info */
2000 IBM_DS(host_index).total_accesses++;
2001 IBM_DS(host_index).ldn_access[ldn]++;
2010 /* Distinguish between disk and other devices. Only disks (that are the
2011 most frequently accessed devices) should be supported by the
2012 IBM-SCSI-Subsystem commands. */
2013 switch (ld(host_index)[ldn].device_type) {
2014 case TYPE_DISK: /* for harddisks enter here ... */
2015 case TYPE_MOD: /* ... try it also for MO-drives (send flames as */
2016 /* you like, if this won't work.) */
2017 if (scsi_cmd == READ_6 || scsi_cmd == READ_10 || scsi_cmd == READ_12) {
2018 /* read command preparations */
2019 scb->enable |= IM_READ_CONTROL;
2020 IBM_DS(host_index).ldn_read_access[ldn]++; /* increase READ-access on ldn stat. */
2021 scb->command = IM_READ_DATA_CMD | IM_NO_DISCONNECT;
2022 } else { /* write command preparations */
2023 IBM_DS(host_index).ldn_write_access[ldn]++; /* increase write-count on ldn stat. */
2024 scb->command = IM_WRITE_DATA_CMD | IM_NO_DISCONNECT;
2026 if (scsi_cmd == READ_6 || scsi_cmd == WRITE_6) {
2027 scb->u1.log_blk_adr = (((unsigned) cmd->cmnd[3]) << 0) | (((unsigned) cmd->cmnd[2]) << 8) | ((((unsigned) cmd->cmnd[1]) & 0x1f) << 16);
2028 scb->u2.blk.count = (unsigned) cmd->cmnd[4];
2030 scb->u1.log_blk_adr = (((unsigned) cmd->cmnd[5]) << 0) | (((unsigned) cmd->cmnd[4]) << 8) | (((unsigned) cmd->cmnd[3]) << 16) | (((unsigned) cmd->cmnd[2]) << 24);
2031 scb->u2.blk.count = (((unsigned) cmd->cmnd[8]) << 0) | (((unsigned) cmd->cmnd[7]) << 8);
2033 last_scsi_logical_block(host_index)[ldn] = scb->u1.log_blk_adr;
2034 last_scsi_blockcount(host_index)[ldn] = scb->u2.blk.count;
2035 scb->u2.blk.length = ld(host_index)[ldn].block_length;
2037 /* for other devices, enter here. Other types are not known by
2038 Linux! TYPE_NO_LUN is forbidden as valid device. */
2041 case TYPE_PROCESSOR:
2044 case TYPE_MEDIUM_CHANGER:
2045 /* If there is a sequential-device, IBM recommends to use
2046 IM_OTHER_SCSI_CMD_CMD instead of subsystem READ/WRITE.
2047 This includes CD-ROM devices, too, due to the partial sequential
2048 read capabilities. */
2049 scb->command = IM_OTHER_SCSI_CMD_CMD;
2050 if (scsi_cmd == READ_6 || scsi_cmd == READ_10 || scsi_cmd == READ_12)
2052 scb->enable |= IM_READ_CONTROL;
2053 scb->enable |= IM_BYPASS_BUFFER;
2054 scb->u1.scsi_cmd_length = cmd->cmd_len;
2055 memcpy(scb->u2.scsi_command, cmd->cmnd, cmd->cmd_len);
2056 last_scsi_type(host_index)[ldn] = IM_LONG_SCB;
2057 /* Read/write on this non-disk devices is also displayworthy,
2058 so flash-up the LED/display. */
2063 IBM_DS(host_index).ldn_inquiry_access[ldn]++;
2064 scb->command = IM_DEVICE_INQUIRY_CMD;
2065 scb->enable |= IM_READ_CONTROL | IM_SUPRESS_EXCEPTION_SHORT | IM_BYPASS_BUFFER;
2066 scb->u1.log_blk_adr = 0;
2068 case TEST_UNIT_READY:
2069 scb->command = IM_OTHER_SCSI_CMD_CMD;
2070 scb->enable |= IM_READ_CONTROL | IM_SUPRESS_EXCEPTION_SHORT | IM_BYPASS_BUFFER;
2071 scb->u1.log_blk_adr = 0;
2072 scb->u1.scsi_cmd_length = 6;
2073 memcpy(scb->u2.scsi_command, cmd->cmnd, 6);
2074 last_scsi_type(host_index)[ldn] = IM_LONG_SCB;
2077 /* the length of system memory buffer must be exactly 8 bytes */
2078 scb->command = IM_READ_CAPACITY_CMD;
2079 scb->enable |= IM_READ_CONTROL | IM_BYPASS_BUFFER;
2080 if (scb->sys_buf_length > 8)
2081 scb->sys_buf_length = 8;
2083 /* Commands that need read-only-mode (system <- device): */
2085 scb->command = IM_REQUEST_SENSE_CMD;
2086 scb->enable |= IM_READ_CONTROL | IM_SUPRESS_EXCEPTION_SHORT | IM_BYPASS_BUFFER;
2088 /* Commands that need write-only-mode (system -> device): */
2090 case MODE_SELECT_10:
2091 IBM_DS(host_index).ldn_modeselect_access[ldn]++;
2092 scb->command = IM_OTHER_SCSI_CMD_CMD;
2093 scb->enable |= IM_SUPRESS_EXCEPTION_SHORT | IM_BYPASS_BUFFER; /*Select needs WRITE-enabled */
2094 scb->u1.scsi_cmd_length = cmd->cmd_len;
2095 memcpy(scb->u2.scsi_command, cmd->cmnd, cmd->cmd_len);
2096 last_scsi_type(host_index)[ldn] = IM_LONG_SCB;
2098 /* For other commands, read-only is useful. Most other commands are
2099 running without an input-data-block. */
2101 scb->command = IM_OTHER_SCSI_CMD_CMD;
2102 scb->enable |= IM_READ_CONTROL | IM_SUPRESS_EXCEPTION_SHORT | IM_BYPASS_BUFFER;
2103 scb->u1.scsi_cmd_length = cmd->cmd_len;
2104 memcpy(scb->u2.scsi_command, cmd->cmnd, cmd->cmd_len);
2105 last_scsi_type(host_index)[ldn] = IM_LONG_SCB;
2108 /*issue scb command, and return */
2109 if (++disk_rw_in_progress == 1)
2110 PS2_DISK_LED_ON(shpnt->host_no, target);
2112 if (last_scsi_type(host_index)[ldn] == IM_LONG_SCB) {
2113 issue_cmd(host_index, isa_virt_to_bus(scb), IM_LONG_SCB | ldn);
2114 IBM_DS(host_index).long_scbs++;
2116 issue_cmd(host_index, isa_virt_to_bus(scb), IM_SCB | ldn);
2117 IBM_DS(host_index).scbs++;
2122 static int __ibmmca_abort(Scsi_Cmnd * cmd)
2124 /* Abort does not work, as the adapter never generates an interrupt on
2125 * whatever situation is simulated, even when really pending commands
2126 * are running on the adapters' hardware ! */
2128 struct Scsi_Host *shpnt;
2130 void (*saved_done) (Scsi_Cmnd *);
2134 unsigned long imm_command;
2136 #ifdef IM_DEBUG_PROBE
2137 printk("IBM MCA SCSI: Abort subroutine called...\n");
2140 shpnt = cmd->device->host;
2141 /* search for the right hostadapter */
2142 for (host_index = 0; hosts[host_index] && hosts[host_index]->host_no != shpnt->host_no; host_index++);
2144 if (!hosts[host_index]) { /* invalid hostadapter descriptor address */
2145 cmd->result = DID_NO_CONNECT << 16;
2147 (cmd->scsi_done) (cmd);
2148 shpnt = cmd->device->host;
2149 #ifdef IM_DEBUG_PROBE
2150 printk(KERN_DEBUG "IBM MCA SCSI: Abort adapter selection failed!\n");
2154 max_pun = subsystem_maxid(host_index);
2155 if (ibm_ansi_order) {
2156 target = max_pun - 1 - cmd->device->id;
2157 if ((target <= subsystem_pun(host_index)) && (cmd->device->id <= subsystem_pun(host_index)))
2159 else if ((target >= subsystem_pun(host_index)) && (cmd->device->id >= subsystem_pun(host_index)))
2162 target = cmd->device->id;
2164 /* get logical device number, and disable system interrupts */
2165 printk(KERN_WARNING "IBM MCA SCSI: Sending abort to device pun=%d, lun=%d.\n", target, cmd->device->lun);
2166 ldn = get_ldn(host_index)[target][cmd->device->lun];
2168 /*if cmd for this ldn has already finished, no need to abort */
2169 if (!ld(host_index)[ldn].cmd) {
2173 /* Clear ld.cmd, save done function, install internal done,
2174 * send abort immediate command (this enables sys. interrupts),
2175 * and wait until the interrupt arrives.
2177 saved_done = cmd->scsi_done;
2178 cmd->scsi_done = internal_done;
2179 cmd->SCp.Status = 0;
2180 last_scsi_command(host_index)[ldn] = IM_ABORT_IMM_CMD;
2181 last_scsi_type(host_index)[ldn] = IM_IMM_CMD;
2182 imm_command = inl(IM_CMD_REG(host_index));
2183 imm_command &= (unsigned long) (0xffff0000); /* mask reserved stuff */
2184 imm_command |= (unsigned long) (IM_ABORT_IMM_CMD);
2185 /* must wait for attention reg not busy */
2186 /* FIXME - timeout, politeness */
2188 if (!(inb(IM_STAT_REG(host_index)) & IM_BUSY))
2191 /* write registers and enable system interrupts */
2192 outl(imm_command, IM_CMD_REG(host_index));
2193 outb(IM_IMM_CMD | ldn, IM_ATTN_REG(host_index));
2194 #ifdef IM_DEBUG_PROBE
2195 printk("IBM MCA SCSI: Abort queued to adapter...\n");
2197 spin_unlock_irq(shpnt->host_lock);
2198 while (!cmd->SCp.Status)
2200 spin_lock_irq(shpnt->host_lock);
2201 cmd->scsi_done = saved_done;
2202 #ifdef IM_DEBUG_PROBE
2203 printk("IBM MCA SCSI: Abort returned with adapter response...\n");
2206 /*if abort went well, call saved done, then return success or error */
2207 if (cmd->result == (DID_ABORT << 16))
2209 cmd->result |= DID_ABORT << 16;
2211 (cmd->scsi_done) (cmd);
2212 ld(host_index)[ldn].cmd = NULL;
2213 #ifdef IM_DEBUG_PROBE
2214 printk("IBM MCA SCSI: Abort finished with success.\n");
2218 cmd->result |= DID_NO_CONNECT << 16;
2220 (cmd->scsi_done) (cmd);
2221 ld(host_index)[ldn].cmd = NULL;
2222 #ifdef IM_DEBUG_PROBE
2223 printk("IBM MCA SCSI: Abort failed.\n");
2229 static int ibmmca_abort(Scsi_Cmnd * cmd)
2231 struct Scsi_Host *shpnt = cmd->device->host;
2234 spin_lock_irq(shpnt->host_lock);
2235 rc = __ibmmca_abort(cmd);
2236 spin_unlock_irq(shpnt->host_lock);
2241 static int __ibmmca_host_reset(Scsi_Cmnd * cmd)
2243 struct Scsi_Host *shpnt;
2247 unsigned long imm_command;
2252 ticks = IM_RESET_DELAY * HZ;
2253 shpnt = cmd->device->host;
2254 /* search for the right hostadapter */
2255 for (host_index = 0; hosts[host_index] && hosts[host_index]->host_no != shpnt->host_no; host_index++);
2257 if (!hosts[host_index]) /* invalid hostadapter descriptor address */
2260 if (local_checking_phase_flag(host_index)) {
2261 printk(KERN_WARNING "IBM MCA SCSI: unable to reset while checking devices.\n");
2265 /* issue reset immediate command to subsystem, and wait for interrupt */
2266 printk("IBM MCA SCSI: resetting all devices.\n");
2267 reset_status(host_index) = IM_RESET_IN_PROGRESS;
2268 last_scsi_command(host_index)[0xf] = IM_RESET_IMM_CMD;
2269 last_scsi_type(host_index)[0xf] = IM_IMM_CMD;
2270 imm_command = inl(IM_CMD_REG(host_index));
2271 imm_command &= (unsigned long) (0xffff0000); /* mask reserved stuff */
2272 imm_command |= (unsigned long) (IM_RESET_IMM_CMD);
2273 /* must wait for attention reg not busy */
2275 if (!(inb(IM_STAT_REG(host_index)) & IM_BUSY))
2277 spin_unlock_irq(shpnt->host_lock);
2279 spin_lock_irq(shpnt->host_lock);
2281 /*write registers and enable system interrupts */
2282 outl(imm_command, IM_CMD_REG(host_index));
2283 outb(IM_IMM_CMD | 0xf, IM_ATTN_REG(host_index));
2284 /* wait for interrupt finished or intr_stat register to be set, as the
2285 * interrupt will not be executed, while we are in here! */
2287 /* FIXME: This is really really icky we so want a sleeping version of this ! */
2288 while (reset_status(host_index) == IM_RESET_IN_PROGRESS && --ticks && ((inb(IM_INTR_REG(host_index)) & 0x8f) != 0x8f)) {
2289 udelay((1 + 999 / HZ) * 1000);
2292 /* if reset did not complete, just return an error */
2294 printk(KERN_ERR "IBM MCA SCSI: reset did not complete within %d seconds.\n", IM_RESET_DELAY);
2295 reset_status(host_index) = IM_RESET_FINISHED_FAIL;
2299 if ((inb(IM_INTR_REG(host_index)) & 0x8f) == 0x8f) {
2300 /* analysis done by this routine and not by the intr-routine */
2301 if (inb(IM_INTR_REG(host_index)) == 0xaf)
2302 reset_status(host_index) = IM_RESET_FINISHED_OK_NO_INT;
2303 else if (inb(IM_INTR_REG(host_index)) == 0xcf)
2304 reset_status(host_index) = IM_RESET_FINISHED_FAIL;
2305 else /* failed, 4get it */
2306 reset_status(host_index) = IM_RESET_NOT_IN_PROGRESS_NO_INT;
2307 outb(IM_EOI | 0xf, IM_ATTN_REG(host_index));
2310 /* if reset failed, just return an error */
2311 if (reset_status(host_index) == IM_RESET_FINISHED_FAIL) {
2312 printk(KERN_ERR "IBM MCA SCSI: reset failed.\n");
2316 /* so reset finished ok - call outstanding done's, and return success */
2317 printk(KERN_INFO "IBM MCA SCSI: Reset successfully completed.\n");
2318 for (i = 0; i < MAX_LOG_DEV; i++) {
2319 cmd_aid = ld(host_index)[i].cmd;
2320 if (cmd_aid && cmd_aid->scsi_done) {
2321 ld(host_index)[i].cmd = NULL;
2322 cmd_aid->result = DID_RESET << 16;
2328 static int ibmmca_host_reset(Scsi_Cmnd * cmd)
2330 struct Scsi_Host *shpnt = cmd->device->host;
2333 spin_lock_irq(shpnt->host_lock);
2334 rc = __ibmmca_host_reset(cmd);
2335 spin_unlock_irq(shpnt->host_lock);
2340 static int ibmmca_biosparam(struct scsi_device *sdev, struct block_device *bdev, sector_t capacity, int *info)
2342 int size = capacity;
2345 info[2] = size / (info[0] * info[1]);
2346 if (info[2] >= 1024) {
2349 info[2] = size / (info[0] * info[1]);
2350 if (info[2] >= 1024) {
2353 info[2] = size / (info[0] * info[1]);
2354 if (info[2] >= 1024)
2361 /* calculate percentage of total accesses on a ldn */
2362 static int ldn_access_load(int host_index, int ldn)
2364 if (IBM_DS(host_index).total_accesses == 0)
2366 if (IBM_DS(host_index).ldn_access[ldn] == 0)
2368 return (IBM_DS(host_index).ldn_access[ldn] * 100) / IBM_DS(host_index).total_accesses;
2371 /* calculate total amount of r/w-accesses */
2372 static int ldn_access_total_read_write(int host_index)
2378 for (i = 0; i <= MAX_LOG_DEV; i++)
2379 a += IBM_DS(host_index).ldn_read_access[i] + IBM_DS(host_index).ldn_write_access[i];
2383 static int ldn_access_total_inquiry(int host_index)
2389 for (i = 0; i <= MAX_LOG_DEV; i++)
2390 a += IBM_DS(host_index).ldn_inquiry_access[i];
2394 static int ldn_access_total_modeselect(int host_index)
2400 for (i = 0; i <= MAX_LOG_DEV; i++)
2401 a += IBM_DS(host_index).ldn_modeselect_access[i];
2405 /* routine to display info in the proc-fs-structure (a deluxe feature) */
2406 static int ibmmca_proc_info(struct Scsi_Host *shpnt, char *buffer, char **start, off_t offset, int length, int inout)
2409 int i, id, lun, host_index;
2410 unsigned long flags;
2413 for (i = 0; hosts[i] && hosts[i] != shpnt; i++);
2415 spin_lock_irqsave(hosts[i]->host_lock, flags); /* Check it */
2418 len += sprintf(buffer + len, "\nIBM MCA SCSI: Can't find adapter for host number %d\n",
2422 max_pun = subsystem_maxid(host_index);
2424 len += sprintf(buffer + len, "\n IBM-SCSI-Subsystem-Linux-Driver, Version %s\n\n\n", IBMMCA_SCSI_DRIVER_VERSION);
2425 len += sprintf(buffer + len, " SCSI Access-Statistics:\n");
2426 len += sprintf(buffer + len, " Device Scanning Order....: %s\n", (ibm_ansi_order) ? "IBM/ANSI" : "New Industry Standard");
2427 #ifdef CONFIG_SCSI_MULTI_LUN
2428 len += sprintf(buffer + len, " Multiple LUN probing.....: Yes\n");
2430 len += sprintf(buffer + len, " Multiple LUN probing.....: No\n");
2432 len += sprintf(buffer + len, " This Hostnumber..........: %d\n", shpnt->host_no);
2433 len += sprintf(buffer + len, " Base I/O-Port............: 0x%x\n", (unsigned int) (IM_CMD_REG(host_index)));
2434 len += sprintf(buffer + len, " (Shared) IRQ.............: %d\n", IM_IRQ);
2435 len += sprintf(buffer + len, " Total Interrupts.........: %d\n", IBM_DS(host_index).total_interrupts);
2436 len += sprintf(buffer + len, " Total SCSI Accesses......: %d\n", IBM_DS(host_index).total_accesses);
2437 len += sprintf(buffer + len, " Total short SCBs.........: %d\n", IBM_DS(host_index).scbs);
2438 len += sprintf(buffer + len, " Total long SCBs..........: %d\n", IBM_DS(host_index).long_scbs);
2439 len += sprintf(buffer + len, " Total SCSI READ/WRITE..: %d\n", ldn_access_total_read_write(host_index));
2440 len += sprintf(buffer + len, " Total SCSI Inquiries...: %d\n", ldn_access_total_inquiry(host_index));
2441 len += sprintf(buffer + len, " Total SCSI Modeselects.: %d\n", ldn_access_total_modeselect(host_index));
2442 len += sprintf(buffer + len, " Total SCSI other cmds..: %d\n", IBM_DS(host_index).total_accesses - ldn_access_total_read_write(host_index)
2443 - ldn_access_total_modeselect(host_index)
2444 - ldn_access_total_inquiry(host_index));
2445 len += sprintf(buffer + len, " Total SCSI command fails.: %d\n\n", IBM_DS(host_index).total_errors);
2446 len += sprintf(buffer + len, " Logical-Device-Number (LDN) Access-Statistics:\n");
2447 len += sprintf(buffer + len, " LDN | Accesses [%%] | READ | WRITE | ASSIGNMENTS\n");
2448 len += sprintf(buffer + len, " -----|--------------|-----------|-----------|--------------\n");
2449 for (i = 0; i <= MAX_LOG_DEV; i++)
2450 len += sprintf(buffer + len, " %2X | %3d | %8d | %8d | %8d\n", i, ldn_access_load(host_index, i), IBM_DS(host_index).ldn_read_access[i], IBM_DS(host_index).ldn_write_access[i], IBM_DS(host_index).ldn_assignments[i]);
2451 len += sprintf(buffer + len, " -----------------------------------------------------------\n\n");
2452 len += sprintf(buffer + len, " Dynamical-LDN-Assignment-Statistics:\n");
2453 len += sprintf(buffer + len, " Number of physical SCSI-devices..: %d (+ Adapter)\n", IBM_DS(host_index).total_scsi_devices);
2454 len += sprintf(buffer + len, " Dynamical Assignment necessary...: %s\n", IBM_DS(host_index).dyn_flag ? "Yes" : "No ");
2455 len += sprintf(buffer + len, " Next LDN to be assigned..........: 0x%x\n", next_ldn(host_index));
2456 len += sprintf(buffer + len, " Dynamical assignments done yet...: %d\n", IBM_DS(host_index).dynamical_assignments);
2457 len += sprintf(buffer + len, "\n Current SCSI-Device-Mapping:\n");
2458 len += sprintf(buffer + len, " Physical SCSI-Device Map Logical SCSI-Device Map\n");
2459 len += sprintf(buffer + len, " ID\\LUN 0 1 2 3 4 5 6 7 ID\\LUN 0 1 2 3 4 5 6 7\n");
2460 for (id = 0; id < max_pun; id++) {
2461 len += sprintf(buffer + len, " %2d ", id);
2462 for (lun = 0; lun < 8; lun++)
2463 len += sprintf(buffer + len, "%2s ", ti_p(get_scsi(host_index)[id][lun]));
2464 len += sprintf(buffer + len, " %2d ", id);
2465 for (lun = 0; lun < 8; lun++)
2466 len += sprintf(buffer + len, "%2s ", ti_l(get_ldn(host_index)[id][lun]));
2467 len += sprintf(buffer + len, "\n");
2470 len += sprintf(buffer + len, "(A = IBM-Subsystem, D = Harddisk, T = Tapedrive, P = Processor, W = WORM,\n");
2471 len += sprintf(buffer + len, " R = CD-ROM, S = Scanner, M = MO-Drive, C = Medium-Changer, + = unprovided LUN,\n");
2472 len += sprintf(buffer + len, " - = nothing found, nothing assigned or unprobed LUN)\n\n");
2474 *start = buffer + offset;
2478 spin_unlock_irqrestore(shpnt->host_lock, flags);
2482 static int option_setup(char *str)
2484 int ints[IM_MAX_HOSTS];
2488 while (cur && isdigit(*cur) && i <= IM_MAX_HOSTS) {
2489 ints[i++] = simple_strtoul(cur, NULL, 0);
2490 if ((cur = strchr(cur, ',')) != NULL)
2494 internal_ibmmca_scsi_setup(cur, ints);
2498 __setup("ibmmcascsi=", option_setup);
2500 static Scsi_Host_Template driver_template = {
2501 .proc_name = "ibmmca",
2502 .proc_info = ibmmca_proc_info,
2503 .name = "IBM SCSI-Subsystem",
2504 .detect = ibmmca_detect,
2505 .release = ibmmca_release,
2506 .queuecommand = ibmmca_queuecommand,
2507 .eh_abort_handler = ibmmca_abort,
2508 .eh_host_reset_handler = ibmmca_host_reset,
2509 .bios_param = ibmmca_biosparam,
2514 .use_clustering = ENABLE_CLUSTERING,
2516 #include "scsi_module.c"
projects / linux-2.6 / blob