Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next
[linux-2.6] / drivers / net / wireless / rtl818x / rtl8180_dev.c
1
2 /*
3  * Linux device driver for RTL8180 / RTL8185
4  *
5  * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
6  * Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
7  *
8  * Based on the r8180 driver, which is:
9  * Copyright 2004-2005 Andrea Merello <andreamrl@tiscali.it>, et al.
10  *
11  * Thanks to Realtek for their support!
12  *
13  * This program is free software; you can redistribute it and/or modify
14  * it under the terms of the GNU General Public License version 2 as
15  * published by the Free Software Foundation.
16  */
17
18 #include <linux/init.h>
19 #include <linux/pci.h>
20 #include <linux/delay.h>
21 #include <linux/etherdevice.h>
22 #include <linux/eeprom_93cx6.h>
23 #include <net/mac80211.h>
24
25 #include "rtl8180.h"
26 #include "rtl8180_rtl8225.h"
27 #include "rtl8180_sa2400.h"
28 #include "rtl8180_max2820.h"
29 #include "rtl8180_grf5101.h"
30
31 MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
32 MODULE_AUTHOR("Andrea Merello <andreamrl@tiscali.it>");
33 MODULE_DESCRIPTION("RTL8180 / RTL8185 PCI wireless driver");
34 MODULE_LICENSE("GPL");
35
36 static struct pci_device_id rtl8180_table[] __devinitdata = {
37         /* rtl8185 */
38         { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8185) },
39         { PCI_DEVICE(PCI_VENDOR_ID_BELKIN, 0x700f) },
40         { PCI_DEVICE(PCI_VENDOR_ID_BELKIN, 0x701f) },
41
42         /* rtl8180 */
43         { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8180) },
44         { PCI_DEVICE(0x1799, 0x6001) },
45         { PCI_DEVICE(0x1799, 0x6020) },
46         { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x3300) },
47         { }
48 };
49
50 MODULE_DEVICE_TABLE(pci, rtl8180_table);
51
52 static const struct ieee80211_rate rtl818x_rates[] = {
53         { .bitrate = 10, .hw_value = 0, },
54         { .bitrate = 20, .hw_value = 1, },
55         { .bitrate = 55, .hw_value = 2, },
56         { .bitrate = 110, .hw_value = 3, },
57         { .bitrate = 60, .hw_value = 4, },
58         { .bitrate = 90, .hw_value = 5, },
59         { .bitrate = 120, .hw_value = 6, },
60         { .bitrate = 180, .hw_value = 7, },
61         { .bitrate = 240, .hw_value = 8, },
62         { .bitrate = 360, .hw_value = 9, },
63         { .bitrate = 480, .hw_value = 10, },
64         { .bitrate = 540, .hw_value = 11, },
65 };
66
67 static const struct ieee80211_channel rtl818x_channels[] = {
68         { .center_freq = 2412 },
69         { .center_freq = 2417 },
70         { .center_freq = 2422 },
71         { .center_freq = 2427 },
72         { .center_freq = 2432 },
73         { .center_freq = 2437 },
74         { .center_freq = 2442 },
75         { .center_freq = 2447 },
76         { .center_freq = 2452 },
77         { .center_freq = 2457 },
78         { .center_freq = 2462 },
79         { .center_freq = 2467 },
80         { .center_freq = 2472 },
81         { .center_freq = 2484 },
82 };
83
84
85
86
87 void rtl8180_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data)
88 {
89         struct rtl8180_priv *priv = dev->priv;
90         int i = 10;
91         u32 buf;
92
93         buf = (data << 8) | addr;
94
95         rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->PHY[0], buf | 0x80);
96         while (i--) {
97                 rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->PHY[0], buf);
98                 if (rtl818x_ioread8(priv, &priv->map->PHY[2]) == (data & 0xFF))
99                         return;
100         }
101 }
102
103 static void rtl8180_handle_rx(struct ieee80211_hw *dev)
104 {
105         struct rtl8180_priv *priv = dev->priv;
106         unsigned int count = 32;
107
108         while (count--) {
109                 struct rtl8180_rx_desc *entry = &priv->rx_ring[priv->rx_idx];
110                 struct sk_buff *skb = priv->rx_buf[priv->rx_idx];
111                 u32 flags = le32_to_cpu(entry->flags);
112
113                 if (flags & RTL818X_RX_DESC_FLAG_OWN)
114                         return;
115
116                 if (unlikely(flags & (RTL818X_RX_DESC_FLAG_DMA_FAIL |
117                                       RTL818X_RX_DESC_FLAG_FOF |
118                                       RTL818X_RX_DESC_FLAG_RX_ERR)))
119                         goto done;
120                 else {
121                         u32 flags2 = le32_to_cpu(entry->flags2);
122                         struct ieee80211_rx_status rx_status = {0};
123                         struct sk_buff *new_skb = dev_alloc_skb(MAX_RX_SIZE);
124
125                         if (unlikely(!new_skb))
126                                 goto done;
127
128                         pci_unmap_single(priv->pdev,
129                                          *((dma_addr_t *)skb->cb),
130                                          MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
131                         skb_put(skb, flags & 0xFFF);
132
133                         rx_status.antenna = (flags2 >> 15) & 1;
134                         /* TODO: improve signal/rssi reporting */
135                         rx_status.qual = flags2 & 0xFF;
136                         rx_status.signal = (flags2 >> 8) & 0x7F;
137                         /* XXX: is this correct? */
138                         rx_status.rate_idx = (flags >> 20) & 0xF;
139                         rx_status.freq = dev->conf.channel->center_freq;
140                         rx_status.band = dev->conf.channel->band;
141                         rx_status.mactime = le64_to_cpu(entry->tsft);
142                         rx_status.flag |= RX_FLAG_TSFT;
143                         if (flags & RTL818X_RX_DESC_FLAG_CRC32_ERR)
144                                 rx_status.flag |= RX_FLAG_FAILED_FCS_CRC;
145
146                         ieee80211_rx_irqsafe(dev, skb, &rx_status);
147
148                         skb = new_skb;
149                         priv->rx_buf[priv->rx_idx] = skb;
150                         *((dma_addr_t *) skb->cb) =
151                                 pci_map_single(priv->pdev, skb_tail_pointer(skb),
152                                                MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
153                 }
154
155         done:
156                 entry->rx_buf = cpu_to_le32(*((dma_addr_t *)skb->cb));
157                 entry->flags = cpu_to_le32(RTL818X_RX_DESC_FLAG_OWN |
158                                            MAX_RX_SIZE);
159                 if (priv->rx_idx == 31)
160                         entry->flags |= cpu_to_le32(RTL818X_RX_DESC_FLAG_EOR);
161                 priv->rx_idx = (priv->rx_idx + 1) % 32;
162         }
163 }
164
165 static void rtl8180_handle_tx(struct ieee80211_hw *dev, unsigned int prio)
166 {
167         struct rtl8180_priv *priv = dev->priv;
168         struct rtl8180_tx_ring *ring = &priv->tx_ring[prio];
169
170         while (skb_queue_len(&ring->queue)) {
171                 struct rtl8180_tx_desc *entry = &ring->desc[ring->idx];
172                 struct sk_buff *skb;
173                 struct ieee80211_tx_info *info;
174                 u32 flags = le32_to_cpu(entry->flags);
175
176                 if (flags & RTL818X_TX_DESC_FLAG_OWN)
177                         return;
178
179                 ring->idx = (ring->idx + 1) % ring->entries;
180                 skb = __skb_dequeue(&ring->queue);
181                 pci_unmap_single(priv->pdev, le32_to_cpu(entry->tx_buf),
182                                  skb->len, PCI_DMA_TODEVICE);
183
184                 info = IEEE80211_SKB_CB(skb);
185                 ieee80211_tx_info_clear_status(info);
186
187                 if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) &&
188                     (flags & RTL818X_TX_DESC_FLAG_TX_OK))
189                         info->flags |= IEEE80211_TX_STAT_ACK;
190
191                 info->status.rates[0].count = (flags & 0xFF) + 1;
192
193                 ieee80211_tx_status_irqsafe(dev, skb);
194                 if (ring->entries - skb_queue_len(&ring->queue) == 2)
195                         ieee80211_wake_queue(dev, prio);
196         }
197 }
198
199 static irqreturn_t rtl8180_interrupt(int irq, void *dev_id)
200 {
201         struct ieee80211_hw *dev = dev_id;
202         struct rtl8180_priv *priv = dev->priv;
203         u16 reg;
204
205         spin_lock(&priv->lock);
206         reg = rtl818x_ioread16(priv, &priv->map->INT_STATUS);
207         if (unlikely(reg == 0xFFFF)) {
208                 spin_unlock(&priv->lock);
209                 return IRQ_HANDLED;
210         }
211
212         rtl818x_iowrite16(priv, &priv->map->INT_STATUS, reg);
213
214         if (reg & (RTL818X_INT_TXB_OK | RTL818X_INT_TXB_ERR))
215                 rtl8180_handle_tx(dev, 3);
216
217         if (reg & (RTL818X_INT_TXH_OK | RTL818X_INT_TXH_ERR))
218                 rtl8180_handle_tx(dev, 2);
219
220         if (reg & (RTL818X_INT_TXN_OK | RTL818X_INT_TXN_ERR))
221                 rtl8180_handle_tx(dev, 1);
222
223         if (reg & (RTL818X_INT_TXL_OK | RTL818X_INT_TXL_ERR))
224                 rtl8180_handle_tx(dev, 0);
225
226         if (reg & (RTL818X_INT_RX_OK | RTL818X_INT_RX_ERR))
227                 rtl8180_handle_rx(dev);
228
229         spin_unlock(&priv->lock);
230
231         return IRQ_HANDLED;
232 }
233
234 static int rtl8180_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
235 {
236         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
237         struct rtl8180_priv *priv = dev->priv;
238         struct rtl8180_tx_ring *ring;
239         struct rtl8180_tx_desc *entry;
240         unsigned long flags;
241         unsigned int idx, prio;
242         dma_addr_t mapping;
243         u32 tx_flags;
244         u8 rc_flags;
245         u16 plcp_len = 0;
246         __le16 rts_duration = 0;
247
248         prio = skb_get_queue_mapping(skb);
249         ring = &priv->tx_ring[prio];
250
251         mapping = pci_map_single(priv->pdev, skb->data,
252                                  skb->len, PCI_DMA_TODEVICE);
253
254         tx_flags = RTL818X_TX_DESC_FLAG_OWN | RTL818X_TX_DESC_FLAG_FS |
255                    RTL818X_TX_DESC_FLAG_LS |
256                    (ieee80211_get_tx_rate(dev, info)->hw_value << 24) |
257                    skb->len;
258
259         if (priv->r8185)
260                 tx_flags |= RTL818X_TX_DESC_FLAG_DMA |
261                             RTL818X_TX_DESC_FLAG_NO_ENC;
262
263         rc_flags = info->control.rates[0].flags;
264         if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
265                 tx_flags |= RTL818X_TX_DESC_FLAG_RTS;
266                 tx_flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
267         } else if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
268                 tx_flags |= RTL818X_TX_DESC_FLAG_CTS;
269                 tx_flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
270         }
271
272         if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS)
273                 rts_duration = ieee80211_rts_duration(dev, priv->vif, skb->len,
274                                                       info);
275
276         if (!priv->r8185) {
277                 unsigned int remainder;
278
279                 plcp_len = DIV_ROUND_UP(16 * (skb->len + 4),
280                                 (ieee80211_get_tx_rate(dev, info)->bitrate * 2) / 10);
281                 remainder = (16 * (skb->len + 4)) %
282                             ((ieee80211_get_tx_rate(dev, info)->bitrate * 2) / 10);
283                 if (remainder > 0 && remainder <= 6)
284                         plcp_len |= 1 << 15;
285         }
286
287         spin_lock_irqsave(&priv->lock, flags);
288         idx = (ring->idx + skb_queue_len(&ring->queue)) % ring->entries;
289         entry = &ring->desc[idx];
290
291         entry->rts_duration = rts_duration;
292         entry->plcp_len = cpu_to_le16(plcp_len);
293         entry->tx_buf = cpu_to_le32(mapping);
294         entry->frame_len = cpu_to_le32(skb->len);
295         entry->flags2 = info->control.rates[1].idx >= 0 ?
296                 ieee80211_get_alt_retry_rate(dev, info, 0)->bitrate << 4 : 0;
297         entry->retry_limit = info->control.rates[0].count;
298         entry->flags = cpu_to_le32(tx_flags);
299         __skb_queue_tail(&ring->queue, skb);
300         if (ring->entries - skb_queue_len(&ring->queue) < 2)
301                 ieee80211_stop_queue(dev, skb_get_queue_mapping(skb));
302         spin_unlock_irqrestore(&priv->lock, flags);
303
304         rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING, (1 << (prio + 4)));
305
306         return 0;
307 }
308
309 void rtl8180_set_anaparam(struct rtl8180_priv *priv, u32 anaparam)
310 {
311         u8 reg;
312
313         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
314         reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
315         rtl818x_iowrite8(priv, &priv->map->CONFIG3,
316                  reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
317         rtl818x_iowrite32(priv, &priv->map->ANAPARAM, anaparam);
318         rtl818x_iowrite8(priv, &priv->map->CONFIG3,
319                  reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
320         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
321 }
322
323 static int rtl8180_init_hw(struct ieee80211_hw *dev)
324 {
325         struct rtl8180_priv *priv = dev->priv;
326         u16 reg;
327
328         rtl818x_iowrite8(priv, &priv->map->CMD, 0);
329         rtl818x_ioread8(priv, &priv->map->CMD);
330         msleep(10);
331
332         /* reset */
333         rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
334         rtl818x_ioread8(priv, &priv->map->CMD);
335
336         reg = rtl818x_ioread8(priv, &priv->map->CMD);
337         reg &= (1 << 1);
338         reg |= RTL818X_CMD_RESET;
339         rtl818x_iowrite8(priv, &priv->map->CMD, RTL818X_CMD_RESET);
340         rtl818x_ioread8(priv, &priv->map->CMD);
341         msleep(200);
342
343         /* check success of reset */
344         if (rtl818x_ioread8(priv, &priv->map->CMD) & RTL818X_CMD_RESET) {
345                 printk(KERN_ERR "%s: reset timeout!\n", wiphy_name(dev->wiphy));
346                 return -ETIMEDOUT;
347         }
348
349         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_LOAD);
350         rtl818x_ioread8(priv, &priv->map->CMD);
351         msleep(200);
352
353         if (rtl818x_ioread8(priv, &priv->map->CONFIG3) & (1 << 3)) {
354                 /* For cardbus */
355                 reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
356                 reg |= 1 << 1;
357                 rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg);
358                 reg = rtl818x_ioread16(priv, &priv->map->FEMR);
359                 reg |= (1 << 15) | (1 << 14) | (1 << 4);
360                 rtl818x_iowrite16(priv, &priv->map->FEMR, reg);
361         }
362
363         rtl818x_iowrite8(priv, &priv->map->MSR, 0);
364
365         if (!priv->r8185)
366                 rtl8180_set_anaparam(priv, priv->anaparam);
367
368         rtl818x_iowrite32(priv, &priv->map->RDSAR, priv->rx_ring_dma);
369         rtl818x_iowrite32(priv, &priv->map->TBDA, priv->tx_ring[3].dma);
370         rtl818x_iowrite32(priv, &priv->map->THPDA, priv->tx_ring[2].dma);
371         rtl818x_iowrite32(priv, &priv->map->TNPDA, priv->tx_ring[1].dma);
372         rtl818x_iowrite32(priv, &priv->map->TLPDA, priv->tx_ring[0].dma);
373
374         /* TODO: necessary? specs indicate not */
375         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
376         reg = rtl818x_ioread8(priv, &priv->map->CONFIG2);
377         rtl818x_iowrite8(priv, &priv->map->CONFIG2, reg & ~(1 << 3));
378         if (priv->r8185) {
379                 reg = rtl818x_ioread8(priv, &priv->map->CONFIG2);
380                 rtl818x_iowrite8(priv, &priv->map->CONFIG2, reg | (1 << 4));
381         }
382         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
383
384         /* TODO: set CONFIG5 for calibrating AGC on rtl8180 + philips radio? */
385
386         /* TODO: turn off hw wep on rtl8180 */
387
388         rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0);
389
390         if (priv->r8185) {
391                 rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0);
392                 rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, 0x81);
393                 rtl818x_iowrite8(priv, &priv->map->RESP_RATE, (8 << 4) | 0);
394
395                 rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
396
397                 /* TODO: set ClkRun enable? necessary? */
398                 reg = rtl818x_ioread8(priv, &priv->map->GP_ENABLE);
399                 rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, reg & ~(1 << 6));
400                 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
401                 reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
402                 rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | (1 << 2));
403                 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
404         } else {
405                 rtl818x_iowrite16(priv, &priv->map->BRSR, 0x1);
406                 rtl818x_iowrite8(priv, &priv->map->SECURITY, 0);
407
408                 rtl818x_iowrite8(priv, &priv->map->PHY_DELAY, 0x6);
409                 rtl818x_iowrite8(priv, &priv->map->CARRIER_SENSE_COUNTER, 0x4C);
410         }
411
412         priv->rf->init(dev);
413         if (priv->r8185)
414                 rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
415         return 0;
416 }
417
418 static int rtl8180_init_rx_ring(struct ieee80211_hw *dev)
419 {
420         struct rtl8180_priv *priv = dev->priv;
421         struct rtl8180_rx_desc *entry;
422         int i;
423
424         priv->rx_ring = pci_alloc_consistent(priv->pdev,
425                                              sizeof(*priv->rx_ring) * 32,
426                                              &priv->rx_ring_dma);
427
428         if (!priv->rx_ring || (unsigned long)priv->rx_ring & 0xFF) {
429                 printk(KERN_ERR "%s: Cannot allocate RX ring\n",
430                        wiphy_name(dev->wiphy));
431                 return -ENOMEM;
432         }
433
434         memset(priv->rx_ring, 0, sizeof(*priv->rx_ring) * 32);
435         priv->rx_idx = 0;
436
437         for (i = 0; i < 32; i++) {
438                 struct sk_buff *skb = dev_alloc_skb(MAX_RX_SIZE);
439                 dma_addr_t *mapping;
440                 entry = &priv->rx_ring[i];
441                 if (!skb)
442                         return 0;
443
444                 priv->rx_buf[i] = skb;
445                 mapping = (dma_addr_t *)skb->cb;
446                 *mapping = pci_map_single(priv->pdev, skb_tail_pointer(skb),
447                                           MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
448                 entry->rx_buf = cpu_to_le32(*mapping);
449                 entry->flags = cpu_to_le32(RTL818X_RX_DESC_FLAG_OWN |
450                                            MAX_RX_SIZE);
451         }
452         entry->flags |= cpu_to_le32(RTL818X_RX_DESC_FLAG_EOR);
453         return 0;
454 }
455
456 static void rtl8180_free_rx_ring(struct ieee80211_hw *dev)
457 {
458         struct rtl8180_priv *priv = dev->priv;
459         int i;
460
461         for (i = 0; i < 32; i++) {
462                 struct sk_buff *skb = priv->rx_buf[i];
463                 if (!skb)
464                         continue;
465
466                 pci_unmap_single(priv->pdev,
467                                  *((dma_addr_t *)skb->cb),
468                                  MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
469                 kfree_skb(skb);
470         }
471
472         pci_free_consistent(priv->pdev, sizeof(*priv->rx_ring) * 32,
473                             priv->rx_ring, priv->rx_ring_dma);
474         priv->rx_ring = NULL;
475 }
476
477 static int rtl8180_init_tx_ring(struct ieee80211_hw *dev,
478                                 unsigned int prio, unsigned int entries)
479 {
480         struct rtl8180_priv *priv = dev->priv;
481         struct rtl8180_tx_desc *ring;
482         dma_addr_t dma;
483         int i;
484
485         ring = pci_alloc_consistent(priv->pdev, sizeof(*ring) * entries, &dma);
486         if (!ring || (unsigned long)ring & 0xFF) {
487                 printk(KERN_ERR "%s: Cannot allocate TX ring (prio = %d)\n",
488                        wiphy_name(dev->wiphy), prio);
489                 return -ENOMEM;
490         }
491
492         memset(ring, 0, sizeof(*ring)*entries);
493         priv->tx_ring[prio].desc = ring;
494         priv->tx_ring[prio].dma = dma;
495         priv->tx_ring[prio].idx = 0;
496         priv->tx_ring[prio].entries = entries;
497         skb_queue_head_init(&priv->tx_ring[prio].queue);
498
499         for (i = 0; i < entries; i++)
500                 ring[i].next_tx_desc =
501                         cpu_to_le32((u32)dma + ((i + 1) % entries) * sizeof(*ring));
502
503         return 0;
504 }
505
506 static void rtl8180_free_tx_ring(struct ieee80211_hw *dev, unsigned int prio)
507 {
508         struct rtl8180_priv *priv = dev->priv;
509         struct rtl8180_tx_ring *ring = &priv->tx_ring[prio];
510
511         while (skb_queue_len(&ring->queue)) {
512                 struct rtl8180_tx_desc *entry = &ring->desc[ring->idx];
513                 struct sk_buff *skb = __skb_dequeue(&ring->queue);
514
515                 pci_unmap_single(priv->pdev, le32_to_cpu(entry->tx_buf),
516                                  skb->len, PCI_DMA_TODEVICE);
517                 kfree_skb(skb);
518                 ring->idx = (ring->idx + 1) % ring->entries;
519         }
520
521         pci_free_consistent(priv->pdev, sizeof(*ring->desc)*ring->entries,
522                             ring->desc, ring->dma);
523         ring->desc = NULL;
524 }
525
526 static int rtl8180_start(struct ieee80211_hw *dev)
527 {
528         struct rtl8180_priv *priv = dev->priv;
529         int ret, i;
530         u32 reg;
531
532         ret = rtl8180_init_rx_ring(dev);
533         if (ret)
534                 return ret;
535
536         for (i = 0; i < 4; i++)
537                 if ((ret = rtl8180_init_tx_ring(dev, i, 16)))
538                         goto err_free_rings;
539
540         ret = rtl8180_init_hw(dev);
541         if (ret)
542                 goto err_free_rings;
543
544         rtl818x_iowrite32(priv, &priv->map->RDSAR, priv->rx_ring_dma);
545         rtl818x_iowrite32(priv, &priv->map->TBDA, priv->tx_ring[3].dma);
546         rtl818x_iowrite32(priv, &priv->map->THPDA, priv->tx_ring[2].dma);
547         rtl818x_iowrite32(priv, &priv->map->TNPDA, priv->tx_ring[1].dma);
548         rtl818x_iowrite32(priv, &priv->map->TLPDA, priv->tx_ring[0].dma);
549
550         ret = request_irq(priv->pdev->irq, &rtl8180_interrupt,
551                           IRQF_SHARED, KBUILD_MODNAME, dev);
552         if (ret) {
553                 printk(KERN_ERR "%s: failed to register IRQ handler\n",
554                        wiphy_name(dev->wiphy));
555                 goto err_free_rings;
556         }
557
558         rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF);
559
560         rtl818x_iowrite32(priv, &priv->map->MAR[0], ~0);
561         rtl818x_iowrite32(priv, &priv->map->MAR[1], ~0);
562
563         reg = RTL818X_RX_CONF_ONLYERLPKT |
564               RTL818X_RX_CONF_RX_AUTORESETPHY |
565               RTL818X_RX_CONF_MGMT |
566               RTL818X_RX_CONF_DATA |
567               (7 << 8 /* MAX RX DMA */) |
568               RTL818X_RX_CONF_BROADCAST |
569               RTL818X_RX_CONF_NICMAC;
570
571         if (priv->r8185)
572                 reg |= RTL818X_RX_CONF_CSDM1 | RTL818X_RX_CONF_CSDM2;
573         else {
574                 reg |= (priv->rfparam & RF_PARAM_CARRIERSENSE1)
575                         ? RTL818X_RX_CONF_CSDM1 : 0;
576                 reg |= (priv->rfparam & RF_PARAM_CARRIERSENSE2)
577                         ? RTL818X_RX_CONF_CSDM2 : 0;
578         }
579
580         priv->rx_conf = reg;
581         rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg);
582
583         if (priv->r8185) {
584                 reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
585                 reg &= ~RTL818X_CW_CONF_PERPACKET_CW_SHIFT;
586                 reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT;
587                 rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg);
588
589                 reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL);
590                 reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT;
591                 reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT;
592                 reg |=  RTL818X_TX_AGC_CTL_FEEDBACK_ANT;
593                 rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg);
594
595                 /* disable early TX */
596                 rtl818x_iowrite8(priv, (u8 __iomem *)priv->map + 0xec, 0x3f);
597         }
598
599         reg = rtl818x_ioread32(priv, &priv->map->TX_CONF);
600         reg |= (6 << 21 /* MAX TX DMA */) |
601                RTL818X_TX_CONF_NO_ICV;
602
603         if (priv->r8185)
604                 reg &= ~RTL818X_TX_CONF_PROBE_DTS;
605         else
606                 reg &= ~RTL818X_TX_CONF_HW_SEQNUM;
607
608         /* different meaning, same value on both rtl8185 and rtl8180 */
609         reg &= ~RTL818X_TX_CONF_SAT_HWPLCP;
610
611         rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg);
612
613         reg = rtl818x_ioread8(priv, &priv->map->CMD);
614         reg |= RTL818X_CMD_RX_ENABLE;
615         reg |= RTL818X_CMD_TX_ENABLE;
616         rtl818x_iowrite8(priv, &priv->map->CMD, reg);
617
618         priv->mode = NL80211_IFTYPE_MONITOR;
619         return 0;
620
621  err_free_rings:
622         rtl8180_free_rx_ring(dev);
623         for (i = 0; i < 4; i++)
624                 if (priv->tx_ring[i].desc)
625                         rtl8180_free_tx_ring(dev, i);
626
627         return ret;
628 }
629
630 static void rtl8180_stop(struct ieee80211_hw *dev)
631 {
632         struct rtl8180_priv *priv = dev->priv;
633         u8 reg;
634         int i;
635
636         priv->mode = NL80211_IFTYPE_UNSPECIFIED;
637
638         rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
639
640         reg = rtl818x_ioread8(priv, &priv->map->CMD);
641         reg &= ~RTL818X_CMD_TX_ENABLE;
642         reg &= ~RTL818X_CMD_RX_ENABLE;
643         rtl818x_iowrite8(priv, &priv->map->CMD, reg);
644
645         priv->rf->stop(dev);
646
647         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
648         reg = rtl818x_ioread8(priv, &priv->map->CONFIG4);
649         rtl818x_iowrite8(priv, &priv->map->CONFIG4, reg | RTL818X_CONFIG4_VCOOFF);
650         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
651
652         free_irq(priv->pdev->irq, dev);
653
654         rtl8180_free_rx_ring(dev);
655         for (i = 0; i < 4; i++)
656                 rtl8180_free_tx_ring(dev, i);
657 }
658
659 static int rtl8180_add_interface(struct ieee80211_hw *dev,
660                                  struct ieee80211_if_init_conf *conf)
661 {
662         struct rtl8180_priv *priv = dev->priv;
663
664         if (priv->mode != NL80211_IFTYPE_MONITOR)
665                 return -EOPNOTSUPP;
666
667         switch (conf->type) {
668         case NL80211_IFTYPE_STATION:
669                 priv->mode = conf->type;
670                 break;
671         default:
672                 return -EOPNOTSUPP;
673         }
674
675         priv->vif = conf->vif;
676
677         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
678         rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->MAC[0],
679                           le32_to_cpu(*(__le32 *)conf->mac_addr));
680         rtl818x_iowrite16(priv, (__le16 __iomem *)&priv->map->MAC[4],
681                           le16_to_cpu(*(__le16 *)(conf->mac_addr + 4)));
682         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
683
684         return 0;
685 }
686
687 static void rtl8180_remove_interface(struct ieee80211_hw *dev,
688                                      struct ieee80211_if_init_conf *conf)
689 {
690         struct rtl8180_priv *priv = dev->priv;
691         priv->mode = NL80211_IFTYPE_MONITOR;
692         priv->vif = NULL;
693 }
694
695 static int rtl8180_config(struct ieee80211_hw *dev, u32 changed)
696 {
697         struct rtl8180_priv *priv = dev->priv;
698         struct ieee80211_conf *conf = &dev->conf;
699
700         priv->rf->set_chan(dev, conf);
701
702         return 0;
703 }
704
705 static int rtl8180_config_interface(struct ieee80211_hw *dev,
706                                     struct ieee80211_vif *vif,
707                                     struct ieee80211_if_conf *conf)
708 {
709         struct rtl8180_priv *priv = dev->priv;
710         int i;
711
712         for (i = 0; i < ETH_ALEN; i++)
713                 rtl818x_iowrite8(priv, &priv->map->BSSID[i], conf->bssid[i]);
714
715         if (is_valid_ether_addr(conf->bssid))
716                 rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_INFRA);
717         else
718                 rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_NO_LINK);
719
720         return 0;
721 }
722
723 static void rtl8180_bss_info_changed(struct ieee80211_hw *dev,
724                                      struct ieee80211_vif *vif,
725                                      struct ieee80211_bss_conf *info,
726                                      u32 changed)
727 {
728         struct rtl8180_priv *priv = dev->priv;
729
730         if (changed & BSS_CHANGED_ERP_SLOT && priv->rf->conf_erp)
731                 priv->rf->conf_erp(dev, info);
732 }
733
734 static void rtl8180_configure_filter(struct ieee80211_hw *dev,
735                                      unsigned int changed_flags,
736                                      unsigned int *total_flags,
737                                      int mc_count, struct dev_addr_list *mclist)
738 {
739         struct rtl8180_priv *priv = dev->priv;
740
741         if (changed_flags & FIF_FCSFAIL)
742                 priv->rx_conf ^= RTL818X_RX_CONF_FCS;
743         if (changed_flags & FIF_CONTROL)
744                 priv->rx_conf ^= RTL818X_RX_CONF_CTRL;
745         if (changed_flags & FIF_OTHER_BSS)
746                 priv->rx_conf ^= RTL818X_RX_CONF_MONITOR;
747         if (*total_flags & FIF_ALLMULTI || mc_count > 0)
748                 priv->rx_conf |= RTL818X_RX_CONF_MULTICAST;
749         else
750                 priv->rx_conf &= ~RTL818X_RX_CONF_MULTICAST;
751
752         *total_flags = 0;
753
754         if (priv->rx_conf & RTL818X_RX_CONF_FCS)
755                 *total_flags |= FIF_FCSFAIL;
756         if (priv->rx_conf & RTL818X_RX_CONF_CTRL)
757                 *total_flags |= FIF_CONTROL;
758         if (priv->rx_conf & RTL818X_RX_CONF_MONITOR)
759                 *total_flags |= FIF_OTHER_BSS;
760         if (priv->rx_conf & RTL818X_RX_CONF_MULTICAST)
761                 *total_flags |= FIF_ALLMULTI;
762
763         rtl818x_iowrite32(priv, &priv->map->RX_CONF, priv->rx_conf);
764 }
765
766 static const struct ieee80211_ops rtl8180_ops = {
767         .tx                     = rtl8180_tx,
768         .start                  = rtl8180_start,
769         .stop                   = rtl8180_stop,
770         .add_interface          = rtl8180_add_interface,
771         .remove_interface       = rtl8180_remove_interface,
772         .config                 = rtl8180_config,
773         .config_interface       = rtl8180_config_interface,
774         .bss_info_changed       = rtl8180_bss_info_changed,
775         .configure_filter       = rtl8180_configure_filter,
776 };
777
778 static void rtl8180_eeprom_register_read(struct eeprom_93cx6 *eeprom)
779 {
780         struct ieee80211_hw *dev = eeprom->data;
781         struct rtl8180_priv *priv = dev->priv;
782         u8 reg = rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
783
784         eeprom->reg_data_in = reg & RTL818X_EEPROM_CMD_WRITE;
785         eeprom->reg_data_out = reg & RTL818X_EEPROM_CMD_READ;
786         eeprom->reg_data_clock = reg & RTL818X_EEPROM_CMD_CK;
787         eeprom->reg_chip_select = reg & RTL818X_EEPROM_CMD_CS;
788 }
789
790 static void rtl8180_eeprom_register_write(struct eeprom_93cx6 *eeprom)
791 {
792         struct ieee80211_hw *dev = eeprom->data;
793         struct rtl8180_priv *priv = dev->priv;
794         u8 reg = 2 << 6;
795
796         if (eeprom->reg_data_in)
797                 reg |= RTL818X_EEPROM_CMD_WRITE;
798         if (eeprom->reg_data_out)
799                 reg |= RTL818X_EEPROM_CMD_READ;
800         if (eeprom->reg_data_clock)
801                 reg |= RTL818X_EEPROM_CMD_CK;
802         if (eeprom->reg_chip_select)
803                 reg |= RTL818X_EEPROM_CMD_CS;
804
805         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, reg);
806         rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
807         udelay(10);
808 }
809
810 static int __devinit rtl8180_probe(struct pci_dev *pdev,
811                                    const struct pci_device_id *id)
812 {
813         struct ieee80211_hw *dev;
814         struct rtl8180_priv *priv;
815         unsigned long mem_addr, mem_len;
816         unsigned int io_addr, io_len;
817         int err, i;
818         struct eeprom_93cx6 eeprom;
819         const char *chip_name, *rf_name = NULL;
820         u32 reg;
821         u16 eeprom_val;
822
823         err = pci_enable_device(pdev);
824         if (err) {
825                 printk(KERN_ERR "%s (rtl8180): Cannot enable new PCI device\n",
826                        pci_name(pdev));
827                 return err;
828         }
829
830         err = pci_request_regions(pdev, KBUILD_MODNAME);
831         if (err) {
832                 printk(KERN_ERR "%s (rtl8180): Cannot obtain PCI resources\n",
833                        pci_name(pdev));
834                 return err;
835         }
836
837         io_addr = pci_resource_start(pdev, 0);
838         io_len = pci_resource_len(pdev, 0);
839         mem_addr = pci_resource_start(pdev, 1);
840         mem_len = pci_resource_len(pdev, 1);
841
842         if (mem_len < sizeof(struct rtl818x_csr) ||
843             io_len < sizeof(struct rtl818x_csr)) {
844                 printk(KERN_ERR "%s (rtl8180): Too short PCI resources\n",
845                        pci_name(pdev));
846                 err = -ENOMEM;
847                 goto err_free_reg;
848         }
849
850         if ((err = pci_set_dma_mask(pdev, 0xFFFFFF00ULL)) ||
851             (err = pci_set_consistent_dma_mask(pdev, 0xFFFFFF00ULL))) {
852                 printk(KERN_ERR "%s (rtl8180): No suitable DMA available\n",
853                        pci_name(pdev));
854                 goto err_free_reg;
855         }
856
857         pci_set_master(pdev);
858
859         dev = ieee80211_alloc_hw(sizeof(*priv), &rtl8180_ops);
860         if (!dev) {
861                 printk(KERN_ERR "%s (rtl8180): ieee80211 alloc failed\n",
862                        pci_name(pdev));
863                 err = -ENOMEM;
864                 goto err_free_reg;
865         }
866
867         priv = dev->priv;
868         priv->pdev = pdev;
869
870         dev->max_rates = 2;
871         SET_IEEE80211_DEV(dev, &pdev->dev);
872         pci_set_drvdata(pdev, dev);
873
874         priv->map = pci_iomap(pdev, 1, mem_len);
875         if (!priv->map)
876                 priv->map = pci_iomap(pdev, 0, io_len);
877
878         if (!priv->map) {
879                 printk(KERN_ERR "%s (rtl8180): Cannot map device memory\n",
880                        pci_name(pdev));
881                 goto err_free_dev;
882         }
883
884         BUILD_BUG_ON(sizeof(priv->channels) != sizeof(rtl818x_channels));
885         BUILD_BUG_ON(sizeof(priv->rates) != sizeof(rtl818x_rates));
886
887         memcpy(priv->channels, rtl818x_channels, sizeof(rtl818x_channels));
888         memcpy(priv->rates, rtl818x_rates, sizeof(rtl818x_rates));
889
890         priv->band.band = IEEE80211_BAND_2GHZ;
891         priv->band.channels = priv->channels;
892         priv->band.n_channels = ARRAY_SIZE(rtl818x_channels);
893         priv->band.bitrates = priv->rates;
894         priv->band.n_bitrates = 4;
895         dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band;
896
897         dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
898                      IEEE80211_HW_RX_INCLUDES_FCS |
899                      IEEE80211_HW_SIGNAL_UNSPEC;
900         dev->queues = 1;
901         dev->max_signal = 65;
902
903         reg = rtl818x_ioread32(priv, &priv->map->TX_CONF);
904         reg &= RTL818X_TX_CONF_HWVER_MASK;
905         switch (reg) {
906         case RTL818X_TX_CONF_R8180_ABCD:
907                 chip_name = "RTL8180";
908                 break;
909         case RTL818X_TX_CONF_R8180_F:
910                 chip_name = "RTL8180vF";
911                 break;
912         case RTL818X_TX_CONF_R8185_ABC:
913                 chip_name = "RTL8185";
914                 break;
915         case RTL818X_TX_CONF_R8185_D:
916                 chip_name = "RTL8185vD";
917                 break;
918         default:
919                 printk(KERN_ERR "%s (rtl8180): Unknown chip! (0x%x)\n",
920                        pci_name(pdev), reg >> 25);
921                 goto err_iounmap;
922         }
923
924         priv->r8185 = reg & RTL818X_TX_CONF_R8185_ABC;
925         if (priv->r8185) {
926                 priv->band.n_bitrates = ARRAY_SIZE(rtl818x_rates);
927                 pci_try_set_mwi(pdev);
928         }
929
930         eeprom.data = dev;
931         eeprom.register_read = rtl8180_eeprom_register_read;
932         eeprom.register_write = rtl8180_eeprom_register_write;
933         if (rtl818x_ioread32(priv, &priv->map->RX_CONF) & (1 << 6))
934                 eeprom.width = PCI_EEPROM_WIDTH_93C66;
935         else
936                 eeprom.width = PCI_EEPROM_WIDTH_93C46;
937
938         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_PROGRAM);
939         rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
940         udelay(10);
941
942         eeprom_93cx6_read(&eeprom, 0x06, &eeprom_val);
943         eeprom_val &= 0xFF;
944         switch (eeprom_val) {
945         case 1: rf_name = "Intersil";
946                 break;
947         case 2: rf_name = "RFMD";
948                 break;
949         case 3: priv->rf = &sa2400_rf_ops;
950                 break;
951         case 4: priv->rf = &max2820_rf_ops;
952                 break;
953         case 5: priv->rf = &grf5101_rf_ops;
954                 break;
955         case 9: priv->rf = rtl8180_detect_rf(dev);
956                 break;
957         case 10:
958                 rf_name = "RTL8255";
959                 break;
960         default:
961                 printk(KERN_ERR "%s (rtl8180): Unknown RF! (0x%x)\n",
962                        pci_name(pdev), eeprom_val);
963                 goto err_iounmap;
964         }
965
966         if (!priv->rf) {
967                 printk(KERN_ERR "%s (rtl8180): %s RF frontend not supported!\n",
968                        pci_name(pdev), rf_name);
969                 goto err_iounmap;
970         }
971
972         eeprom_93cx6_read(&eeprom, 0x17, &eeprom_val);
973         priv->csthreshold = eeprom_val >> 8;
974         if (!priv->r8185) {
975                 __le32 anaparam;
976                 eeprom_93cx6_multiread(&eeprom, 0xD, (__le16 *)&anaparam, 2);
977                 priv->anaparam = le32_to_cpu(anaparam);
978                 eeprom_93cx6_read(&eeprom, 0x19, &priv->rfparam);
979         }
980
981         eeprom_93cx6_multiread(&eeprom, 0x7, (__le16 *)dev->wiphy->perm_addr, 3);
982         if (!is_valid_ether_addr(dev->wiphy->perm_addr)) {
983                 printk(KERN_WARNING "%s (rtl8180): Invalid hwaddr! Using"
984                        " randomly generated MAC addr\n", pci_name(pdev));
985                 random_ether_addr(dev->wiphy->perm_addr);
986         }
987
988         /* CCK TX power */
989         for (i = 0; i < 14; i += 2) {
990                 u16 txpwr;
991                 eeprom_93cx6_read(&eeprom, 0x10 + (i >> 1), &txpwr);
992                 priv->channels[i].hw_value = txpwr & 0xFF;
993                 priv->channels[i + 1].hw_value = txpwr >> 8;
994         }
995
996         /* OFDM TX power */
997         if (priv->r8185) {
998                 for (i = 0; i < 14; i += 2) {
999                         u16 txpwr;
1000                         eeprom_93cx6_read(&eeprom, 0x20 + (i >> 1), &txpwr);
1001                         priv->channels[i].hw_value |= (txpwr & 0xFF) << 8;
1002                         priv->channels[i + 1].hw_value |= txpwr & 0xFF00;
1003                 }
1004         }
1005
1006         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
1007
1008         spin_lock_init(&priv->lock);
1009
1010         err = ieee80211_register_hw(dev);
1011         if (err) {
1012                 printk(KERN_ERR "%s (rtl8180): Cannot register device\n",
1013                        pci_name(pdev));
1014                 goto err_iounmap;
1015         }
1016
1017         printk(KERN_INFO "%s: hwaddr %pM, %s + %s\n",
1018                wiphy_name(dev->wiphy), dev->wiphy->perm_addr,
1019                chip_name, priv->rf->name);
1020
1021         return 0;
1022
1023  err_iounmap:
1024         iounmap(priv->map);
1025
1026  err_free_dev:
1027         pci_set_drvdata(pdev, NULL);
1028         ieee80211_free_hw(dev);
1029
1030  err_free_reg:
1031         pci_release_regions(pdev);
1032         pci_disable_device(pdev);
1033         return err;
1034 }
1035
1036 static void __devexit rtl8180_remove(struct pci_dev *pdev)
1037 {
1038         struct ieee80211_hw *dev = pci_get_drvdata(pdev);
1039         struct rtl8180_priv *priv;
1040
1041         if (!dev)
1042                 return;
1043
1044         ieee80211_unregister_hw(dev);
1045
1046         priv = dev->priv;
1047
1048         pci_iounmap(pdev, priv->map);
1049         pci_release_regions(pdev);
1050         pci_disable_device(pdev);
1051         ieee80211_free_hw(dev);
1052 }
1053
1054 #ifdef CONFIG_PM
1055 static int rtl8180_suspend(struct pci_dev *pdev, pm_message_t state)
1056 {
1057         pci_save_state(pdev);
1058         pci_set_power_state(pdev, pci_choose_state(pdev, state));
1059         return 0;
1060 }
1061
1062 static int rtl8180_resume(struct pci_dev *pdev)
1063 {
1064         pci_set_power_state(pdev, PCI_D0);
1065         pci_restore_state(pdev);
1066         return 0;
1067 }
1068
1069 #endif /* CONFIG_PM */
1070
1071 static struct pci_driver rtl8180_driver = {
1072         .name           = KBUILD_MODNAME,
1073         .id_table       = rtl8180_table,
1074         .probe          = rtl8180_probe,
1075         .remove         = __devexit_p(rtl8180_remove),
1076 #ifdef CONFIG_PM
1077         .suspend        = rtl8180_suspend,
1078         .resume         = rtl8180_resume,
1079 #endif /* CONFIG_PM */
1080 };
1081
1082 static int __init rtl8180_init(void)
1083 {
1084         return pci_register_driver(&rtl8180_driver);
1085 }
1086
1087 static void __exit rtl8180_exit(void)
1088 {
1089         pci_unregister_driver(&rtl8180_driver);
1090 }
1091
1092 module_init(rtl8180_init);
1093 module_exit(rtl8180_exit);