git.oblomov.eu Git - linux-2.6/blob - drivers/net/e1000e/es2lan.c

   1 /*******************************************************************************
   2
   3   Intel PRO/1000 Linux driver
   4   Copyright(c) 1999 - 2008 Intel Corporation.
   5
   6   This program is free software; you can redistribute it and/or modify it
   7   under the terms and conditions of the GNU General Public License,
   8   version 2, as published by the Free Software Foundation.
   9
  10   This program is distributed in the hope it will be useful, but WITHOUT
  11   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  12   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  13   more details.
  14
  15   You should have received a copy of the GNU General Public License along with
  16   this program; if not, write to the Free Software Foundation, Inc.,
  17   51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  18
  19   The full GNU General Public License is included in this distribution in
  20   the file called "COPYING".
  21
  22   Contact Information:
  23   Linux NICS <linux.nics@intel.com>
  24   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
  25   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  26
  27 *******************************************************************************/
  28
  29 /*
  30  * 80003ES2LAN Gigabit Ethernet Controller (Copper)
  31  * 80003ES2LAN Gigabit Ethernet Controller (Serdes)
  32  */
  33
  34 #include <linux/netdevice.h>
  35 #include <linux/ethtool.h>
  36 #include <linux/delay.h>
  37 #include <linux/pci.h>
  38
  39 #include "e1000.h"
  40
  41 #define E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL       0x00
  42 #define E1000_KMRNCTRLSTA_OFFSET_INB_CTRL        0x02
  43 #define E1000_KMRNCTRLSTA_OFFSET_HD_CTRL         0x10
  44 #define E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE  0x1F
  45
  46 #define E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS    0x0008
  47 #define E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS    0x0800
  48 #define E1000_KMRNCTRLSTA_INB_CTRL_DIS_PADDING   0x0010
  49
  50 #define E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT 0x0004
  51 #define E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT   0x0000
  52 #define E1000_KMRNCTRLSTA_OPMODE_E_IDLE          0x2000
  53
  54 #define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00 /* Gigabit Carry Extend Padding */
  55 #define DEFAULT_TCTL_EXT_GCEX_80003ES2LAN        0x00010000
  56
  57 #define DEFAULT_TIPG_IPGT_1000_80003ES2LAN       0x8
  58 #define DEFAULT_TIPG_IPGT_10_100_80003ES2LAN     0x9
  59
  60 /* GG82563 PHY Specific Status Register (Page 0, Register 16 */
  61 #define GG82563_PSCR_POLARITY_REVERSAL_DISABLE   0x0002 /* 1=Reversal Disab. */
  62 #define GG82563_PSCR_CROSSOVER_MODE_MASK         0x0060
  63 #define GG82563_PSCR_CROSSOVER_MODE_MDI          0x0000 /* 00=Manual MDI */
  64 #define GG82563_PSCR_CROSSOVER_MODE_MDIX         0x0020 /* 01=Manual MDIX */
  65 #define GG82563_PSCR_CROSSOVER_MODE_AUTO         0x0060 /* 11=Auto crossover */
  66
  67 /* PHY Specific Control Register 2 (Page 0, Register 26) */
  68 #define GG82563_PSCR2_REVERSE_AUTO_NEG           0x2000
  69                                                 /* 1=Reverse Auto-Negotiation */
  70
  71 /* MAC Specific Control Register (Page 2, Register 21) */
  72 /* Tx clock speed for Link Down and 1000BASE-T for the following speeds */
  73 #define GG82563_MSCR_TX_CLK_MASK                 0x0007
  74 #define GG82563_MSCR_TX_CLK_10MBPS_2_5           0x0004
  75 #define GG82563_MSCR_TX_CLK_100MBPS_25           0x0005
  76 #define GG82563_MSCR_TX_CLK_1000MBPS_25          0x0007
  77
  78 #define GG82563_MSCR_ASSERT_CRS_ON_TX            0x0010 /* 1=Assert */
  79
  80 /* DSP Distance Register (Page 5, Register 26) */
  81 #define GG82563_DSPD_CABLE_LENGTH                0x0007 /* 0 = <50M
  82                                                            1 = 50-80M
  83                                                            2 = 80-110M
  84                                                            3 = 110-140M
  85                                                            4 = >140M */
  86
  87 /* Kumeran Mode Control Register (Page 193, Register 16) */
  88 #define GG82563_KMCR_PASS_FALSE_CARRIER          0x0800
  89
  90 /* Max number of times Kumeran read/write should be validated */
  91 #define GG82563_MAX_KMRN_RETRY  0x5
  92
  93 /* Power Management Control Register (Page 193, Register 20) */
  94 #define GG82563_PMCR_ENABLE_ELECTRICAL_IDLE      0x0001
  95                                            /* 1=Enable SERDES Electrical Idle */
  96
  97 /* In-Band Control Register (Page 194, Register 18) */
  98 #define GG82563_ICR_DIS_PADDING                  0x0010 /* Disable Padding */
  99
 100 /*
 101  * A table for the GG82563 cable length where the range is defined
 102  * with a lower bound at "index" and the upper bound at
 103  * "index + 5".
 104  */
 105 static const u16 e1000_gg82563_cable_length_table[] =
 106          { 0, 60, 115, 150, 150, 60, 115, 150, 180, 180, 0xFF };
 107
 108 static s32 e1000_setup_copper_link_80003es2lan(struct e1000_hw *hw);
 109 static s32 e1000_acquire_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask);
 110 static void e1000_release_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask);
 111 static void e1000_initialize_hw_bits_80003es2lan(struct e1000_hw *hw);
 112 static void e1000_clear_hw_cntrs_80003es2lan(struct e1000_hw *hw);
 113 static s32 e1000_cfg_kmrn_1000_80003es2lan(struct e1000_hw *hw);
 114 static s32 e1000_cfg_kmrn_10_100_80003es2lan(struct e1000_hw *hw, u16 duplex);
 115 static s32 e1000_cfg_on_link_up_80003es2lan(struct e1000_hw *hw);
 116 static s32  e1000_read_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
 117                                             u16 *data);
 118 static s32  e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
 119                                              u16 data);
 120
 121 /**
 122  *  e1000_init_phy_params_80003es2lan - Init ESB2 PHY func ptrs.
 123  *  @hw: pointer to the HW structure
 124  *
 125  *  This is a function pointer entry point called by the api module.
 126  **/
 127 static s32 e1000_init_phy_params_80003es2lan(struct e1000_hw *hw)
 128 {
 129         struct e1000_phy_info *phy = &hw->phy;
 130         s32 ret_val;
 131
 132         if (hw->phy.media_type != e1000_media_type_copper) {
 133                 phy->type       = e1000_phy_none;
 134                 return 0;
 135         }
 136
 137         phy->addr               = 1;
 138         phy->autoneg_mask       = AUTONEG_ADVERTISE_SPEED_DEFAULT;
 139         phy->reset_delay_us      = 100;
 140         phy->type               = e1000_phy_gg82563;
 141
 142         /* This can only be done after all function pointers are setup. */
 143         ret_val = e1000e_get_phy_id(hw);
 144
 145         /* Verify phy id */
 146         if (phy->id != GG82563_E_PHY_ID)
 147                 return -E1000_ERR_PHY;
 148
 149         return ret_val;
 150 }
 151
 152 /**
 153  *  e1000_init_nvm_params_80003es2lan - Init ESB2 NVM func ptrs.
 154  *  @hw: pointer to the HW structure
 155  *
 156  *  This is a function pointer entry point called by the api module.
 157  **/
 158 static s32 e1000_init_nvm_params_80003es2lan(struct e1000_hw *hw)
 159 {
 160         struct e1000_nvm_info *nvm = &hw->nvm;
 161         u32 eecd = er32(EECD);
 162         u16 size;
 163
 164         nvm->opcode_bits        = 8;
 165         nvm->delay_usec  = 1;
 166         switch (nvm->override) {
 167         case e1000_nvm_override_spi_large:
 168                 nvm->page_size    = 32;
 169                 nvm->address_bits = 16;
 170                 break;
 171         case e1000_nvm_override_spi_small:
 172                 nvm->page_size    = 8;
 173                 nvm->address_bits = 8;
 174                 break;
 175         default:
 176                 nvm->page_size    = eecd & E1000_EECD_ADDR_BITS ? 32 : 8;
 177                 nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ? 16 : 8;
 178                 break;
 179         }
 180
 181         nvm->type = e1000_nvm_eeprom_spi;
 182
 183         size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >>
 184                           E1000_EECD_SIZE_EX_SHIFT);
 185
 186         /*
 187          * Added to a constant, "size" becomes the left-shift value
 188          * for setting word_size.
 189          */
 190         size += NVM_WORD_SIZE_BASE_SHIFT;
 191
 192         /* EEPROM access above 16k is unsupported */
 193         if (size > 14)
 194                 size = 14;
 195         nvm->word_size  = 1 << size;
 196
 197         return 0;
 198 }
 199
 200 /**
 201  *  e1000_init_mac_params_80003es2lan - Init ESB2 MAC func ptrs.
 202  *  @hw: pointer to the HW structure
 203  *
 204  *  This is a function pointer entry point called by the api module.
 205  **/
 206 static s32 e1000_init_mac_params_80003es2lan(struct e1000_adapter *adapter)
 207 {
 208         struct e1000_hw *hw = &adapter->hw;
 209         struct e1000_mac_info *mac = &hw->mac;
 210         struct e1000_mac_operations *func = &mac->ops;
 211
 212         /* Set media type */
 213         switch (adapter->pdev->device) {
 214         case E1000_DEV_ID_80003ES2LAN_SERDES_DPT:
 215                 hw->phy.media_type = e1000_media_type_internal_serdes;
 216                 break;
 217         default:
 218                 hw->phy.media_type = e1000_media_type_copper;
 219                 break;
 220         }
 221
 222         /* Set mta register count */
 223         mac->mta_reg_count = 128;
 224         /* Set rar entry count */
 225         mac->rar_entry_count = E1000_RAR_ENTRIES;
 226         /* Set if manageability features are enabled. */
 227         mac->arc_subsystem_valid = (er32(FWSM) & E1000_FWSM_MODE_MASK) ? 1 : 0;
 228
 229         /* check for link */
 230         switch (hw->phy.media_type) {
 231         case e1000_media_type_copper:
 232                 func->setup_physical_interface = e1000_setup_copper_link_80003es2lan;
 233                 func->check_for_link = e1000e_check_for_copper_link;
 234                 break;
 235         case e1000_media_type_fiber:
 236                 func->setup_physical_interface = e1000e_setup_fiber_serdes_link;
 237                 func->check_for_link = e1000e_check_for_fiber_link;
 238                 break;
 239         case e1000_media_type_internal_serdes:
 240                 func->setup_physical_interface = e1000e_setup_fiber_serdes_link;
 241                 func->check_for_link = e1000e_check_for_serdes_link;
 242                 break;
 243         default:
 244                 return -E1000_ERR_CONFIG;
 245                 break;
 246         }
 247
 248         return 0;
 249 }
 250
 251 static s32 e1000_get_variants_80003es2lan(struct e1000_adapter *adapter)
 252 {
 253         struct e1000_hw *hw = &adapter->hw;
 254         s32 rc;
 255
 256         rc = e1000_init_mac_params_80003es2lan(adapter);
 257         if (rc)
 258                 return rc;
 259
 260         rc = e1000_init_nvm_params_80003es2lan(hw);
 261         if (rc)
 262                 return rc;
 263
 264         rc = e1000_init_phy_params_80003es2lan(hw);
 265         if (rc)
 266                 return rc;
 267
 268         return 0;
 269 }
 270
 271 /**
 272  *  e1000_acquire_phy_80003es2lan - Acquire rights to access PHY
 273  *  @hw: pointer to the HW structure
 274  *
 275  *  A wrapper to acquire access rights to the correct PHY.  This is a
 276  *  function pointer entry point called by the api module.
 277  **/
 278 static s32 e1000_acquire_phy_80003es2lan(struct e1000_hw *hw)
 279 {
 280         u16 mask;
 281
 282         mask = hw->bus.func ? E1000_SWFW_PHY1_SM : E1000_SWFW_PHY0_SM;
 283         return e1000_acquire_swfw_sync_80003es2lan(hw, mask);
 284 }
 285
 286 /**
 287  *  e1000_release_phy_80003es2lan - Release rights to access PHY
 288  *  @hw: pointer to the HW structure
 289  *
 290  *  A wrapper to release access rights to the correct PHY.  This is a
 291  *  function pointer entry point called by the api module.
 292  **/
 293 static void e1000_release_phy_80003es2lan(struct e1000_hw *hw)
 294 {
 295         u16 mask;
 296
 297         mask = hw->bus.func ? E1000_SWFW_PHY1_SM : E1000_SWFW_PHY0_SM;
 298         e1000_release_swfw_sync_80003es2lan(hw, mask);
 299 }
 300
 301 /**
 302  *  e1000_acquire_mac_csr_80003es2lan - Acquire rights to access Kumeran register
 303  *  @hw: pointer to the HW structure
 304  *
 305  *  Acquire the semaphore to access the Kumeran interface.
 306  *
 307  **/
 308 static s32 e1000_acquire_mac_csr_80003es2lan(struct e1000_hw *hw)
 309 {
 310         u16 mask;
 311
 312         mask = E1000_SWFW_CSR_SM;
 313
 314         return e1000_acquire_swfw_sync_80003es2lan(hw, mask);
 315 }
 316
 317 /**
 318  *  e1000_release_mac_csr_80003es2lan - Release rights to access Kumeran Register
 319  *  @hw: pointer to the HW structure
 320  *
 321  *  Release the semaphore used to access the Kumeran interface
 322  **/
 323 static void e1000_release_mac_csr_80003es2lan(struct e1000_hw *hw)
 324 {
 325         u16 mask;
 326
 327         mask = E1000_SWFW_CSR_SM;
 328
 329         e1000_release_swfw_sync_80003es2lan(hw, mask);
 330 }
 331
 332 /**
 333  *  e1000_acquire_nvm_80003es2lan - Acquire rights to access NVM
 334  *  @hw: pointer to the HW structure
 335  *
 336  *  Acquire the semaphore to access the EEPROM.  This is a function
 337  *  pointer entry point called by the api module.
 338  **/
 339 static s32 e1000_acquire_nvm_80003es2lan(struct e1000_hw *hw)
 340 {
 341         s32 ret_val;
 342
 343         ret_val = e1000_acquire_swfw_sync_80003es2lan(hw, E1000_SWFW_EEP_SM);
 344         if (ret_val)
 345                 return ret_val;
 346
 347         ret_val = e1000e_acquire_nvm(hw);
 348
 349         if (ret_val)
 350                 e1000_release_swfw_sync_80003es2lan(hw, E1000_SWFW_EEP_SM);
 351
 352         return ret_val;
 353 }
 354
 355 /**
 356  *  e1000_release_nvm_80003es2lan - Relinquish rights to access NVM
 357  *  @hw: pointer to the HW structure
 358  *
 359  *  Release the semaphore used to access the EEPROM.  This is a
 360  *  function pointer entry point called by the api module.
 361  **/
 362 static void e1000_release_nvm_80003es2lan(struct e1000_hw *hw)
 363 {
 364         e1000e_release_nvm(hw);
 365         e1000_release_swfw_sync_80003es2lan(hw, E1000_SWFW_EEP_SM);
 366 }
 367
 368 /**
 369  *  e1000_acquire_swfw_sync_80003es2lan - Acquire SW/FW semaphore
 370  *  @hw: pointer to the HW structure
 371  *  @mask: specifies which semaphore to acquire
 372  *
 373  *  Acquire the SW/FW semaphore to access the PHY or NVM.  The mask
 374  *  will also specify which port we're acquiring the lock for.
 375  **/
 376 static s32 e1000_acquire_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask)
 377 {
 378         u32 swfw_sync;
 379         u32 swmask = mask;
 380         u32 fwmask = mask << 16;
 381         s32 i = 0;
 382         s32 timeout = 50;
 383
 384         while (i < timeout) {
 385                 if (e1000e_get_hw_semaphore(hw))
 386                         return -E1000_ERR_SWFW_SYNC;
 387
 388                 swfw_sync = er32(SW_FW_SYNC);
 389                 if (!(swfw_sync & (fwmask | swmask)))
 390                         break;
 391
 392                 /*
 393                  * Firmware currently using resource (fwmask)
 394                  * or other software thread using resource (swmask)
 395                  */
 396                 e1000e_put_hw_semaphore(hw);
 397                 mdelay(5);
 398                 i++;
 399         }
 400
 401         if (i == timeout) {
 402                 hw_dbg(hw,
 403                        "Driver can't access resource, SW_FW_SYNC timeout.\n");
 404                 return -E1000_ERR_SWFW_SYNC;
 405         }
 406
 407         swfw_sync |= swmask;
 408         ew32(SW_FW_SYNC, swfw_sync);
 409
 410         e1000e_put_hw_semaphore(hw);
 411
 412         return 0;
 413 }
 414
 415 /**
 416  *  e1000_release_swfw_sync_80003es2lan - Release SW/FW semaphore
 417  *  @hw: pointer to the HW structure
 418  *  @mask: specifies which semaphore to acquire
 419  *
 420  *  Release the SW/FW semaphore used to access the PHY or NVM.  The mask
 421  *  will also specify which port we're releasing the lock for.
 422  **/
 423 static void e1000_release_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask)
 424 {
 425         u32 swfw_sync;
 426
 427         while (e1000e_get_hw_semaphore(hw) != 0);
 428         /* Empty */
 429
 430         swfw_sync = er32(SW_FW_SYNC);
 431         swfw_sync &= ~mask;
 432         ew32(SW_FW_SYNC, swfw_sync);
 433
 434         e1000e_put_hw_semaphore(hw);
 435 }
 436
 437 /**
 438  *  e1000_read_phy_reg_gg82563_80003es2lan - Read GG82563 PHY register
 439  *  @hw: pointer to the HW structure
 440  *  @offset: offset of the register to read
 441  *  @data: pointer to the data returned from the operation
 442  *
 443  *  Read the GG82563 PHY register.  This is a function pointer entry
 444  *  point called by the api module.
 445  **/
 446 static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
 447                                                   u32 offset, u16 *data)
 448 {
 449         s32 ret_val;
 450         u32 page_select;
 451         u16 temp;
 452
 453         ret_val = e1000_acquire_phy_80003es2lan(hw);
 454         if (ret_val)
 455                 return ret_val;
 456
 457         /* Select Configuration Page */
 458         if ((offset & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) {
 459                 page_select = GG82563_PHY_PAGE_SELECT;
 460         } else {
 461                 /*
 462                  * Use Alternative Page Select register to access
 463                  * registers 30 and 31
 464                  */
 465                 page_select = GG82563_PHY_PAGE_SELECT_ALT;
 466         }
 467
 468         temp = (u16)((u16)offset >> GG82563_PAGE_SHIFT);
 469         ret_val = e1000e_write_phy_reg_mdic(hw, page_select, temp);
 470         if (ret_val) {
 471                 e1000_release_phy_80003es2lan(hw);
 472                 return ret_val;
 473         }
 474
 475         /*
 476          * The "ready" bit in the MDIC register may be incorrectly set
 477          * before the device has completed the "Page Select" MDI
 478          * transaction.  So we wait 200us after each MDI command...
 479          */
 480         udelay(200);
 481
 482         /* ...and verify the command was successful. */
 483         ret_val = e1000e_read_phy_reg_mdic(hw, page_select, &temp);
 484
 485         if (((u16)offset >> GG82563_PAGE_SHIFT) != temp) {
 486                 ret_val = -E1000_ERR_PHY;
 487                 e1000_release_phy_80003es2lan(hw);
 488                 return ret_val;
 489         }
 490
 491         udelay(200);
 492
 493         ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
 494                                            data);
 495
 496         udelay(200);
 497         e1000_release_phy_80003es2lan(hw);
 498
 499         return ret_val;
 500 }
 501
 502 /**
 503  *  e1000_write_phy_reg_gg82563_80003es2lan - Write GG82563 PHY register
 504  *  @hw: pointer to the HW structure
 505  *  @offset: offset of the register to read
 506  *  @data: value to write to the register
 507  *
 508  *  Write to the GG82563 PHY register.  This is a function pointer entry
 509  *  point called by the api module.
 510  **/
 511 static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
 512                                                    u32 offset, u16 data)
 513 {
 514         s32 ret_val;
 515         u32 page_select;
 516         u16 temp;
 517
 518         ret_val = e1000_acquire_phy_80003es2lan(hw);
 519         if (ret_val)
 520                 return ret_val;
 521
 522         /* Select Configuration Page */
 523         if ((offset & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) {
 524                 page_select = GG82563_PHY_PAGE_SELECT;
 525         } else {
 526                 /*
 527                  * Use Alternative Page Select register to access
 528                  * registers 30 and 31
 529                  */
 530                 page_select = GG82563_PHY_PAGE_SELECT_ALT;
 531         }
 532
 533         temp = (u16)((u16)offset >> GG82563_PAGE_SHIFT);
 534         ret_val = e1000e_write_phy_reg_mdic(hw, page_select, temp);
 535         if (ret_val) {
 536                 e1000_release_phy_80003es2lan(hw);
 537                 return ret_val;
 538         }
 539
 540
 541         /*
 542          * The "ready" bit in the MDIC register may be incorrectly set
 543          * before the device has completed the "Page Select" MDI
 544          * transaction.  So we wait 200us after each MDI command...
 545          */
 546         udelay(200);
 547
 548         /* ...and verify the command was successful. */
 549         ret_val = e1000e_read_phy_reg_mdic(hw, page_select, &temp);
 550
 551         if (((u16)offset >> GG82563_PAGE_SHIFT) != temp) {
 552                 e1000_release_phy_80003es2lan(hw);
 553                 return -E1000_ERR_PHY;
 554         }
 555
 556         udelay(200);
 557
 558         ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
 559                                             data);
 560
 561         udelay(200);
 562         e1000_release_phy_80003es2lan(hw);
 563
 564         return ret_val;
 565 }
 566
 567 /**
 568  *  e1000_write_nvm_80003es2lan - Write to ESB2 NVM
 569  *  @hw: pointer to the HW structure
 570  *  @offset: offset of the register to read
 571  *  @words: number of words to write
 572  *  @data: buffer of data to write to the NVM
 573  *
 574  *  Write "words" of data to the ESB2 NVM.  This is a function
 575  *  pointer entry point called by the api module.
 576  **/
 577 static s32 e1000_write_nvm_80003es2lan(struct e1000_hw *hw, u16 offset,
 578                                        u16 words, u16 *data)
 579 {
 580         return e1000e_write_nvm_spi(hw, offset, words, data);
 581 }
 582
 583 /**
 584  *  e1000_get_cfg_done_80003es2lan - Wait for configuration to complete
 585  *  @hw: pointer to the HW structure
 586  *
 587  *  Wait a specific amount of time for manageability processes to complete.
 588  *  This is a function pointer entry point called by the phy module.
 589  **/
 590 static s32 e1000_get_cfg_done_80003es2lan(struct e1000_hw *hw)
 591 {
 592         s32 timeout = PHY_CFG_TIMEOUT;
 593         u32 mask = E1000_NVM_CFG_DONE_PORT_0;
 594
 595         if (hw->bus.func == 1)
 596                 mask = E1000_NVM_CFG_DONE_PORT_1;
 597
 598         while (timeout) {
 599                 if (er32(EEMNGCTL) & mask)
 600                         break;
 601                 msleep(1);
 602                 timeout--;
 603         }
 604         if (!timeout) {
 605                 hw_dbg(hw, "MNG configuration cycle has not completed.\n");
 606                 return -E1000_ERR_RESET;
 607         }
 608
 609         return 0;
 610 }
 611
 612 /**
 613  *  e1000_phy_force_speed_duplex_80003es2lan - Force PHY speed and duplex
 614  *  @hw: pointer to the HW structure
 615  *
 616  *  Force the speed and duplex settings onto the PHY.  This is a
 617  *  function pointer entry point called by the phy module.
 618  **/
 619 static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw)
 620 {
 621         s32 ret_val;
 622         u16 phy_data;
 623         bool link;
 624
 625         /*
 626          * Clear Auto-Crossover to force MDI manually.  M88E1000 requires MDI
 627          * forced whenever speed and duplex are forced.
 628          */
 629         ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
 630         if (ret_val)
 631                 return ret_val;
 632
 633         phy_data &= ~GG82563_PSCR_CROSSOVER_MODE_AUTO;
 634         ret_val = e1e_wphy(hw, GG82563_PHY_SPEC_CTRL, phy_data);
 635         if (ret_val)
 636                 return ret_val;
 637
 638         hw_dbg(hw, "GG82563 PSCR: %X\n", phy_data);
 639
 640         ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data);
 641         if (ret_val)
 642                 return ret_val;
 643
 644         e1000e_phy_force_speed_duplex_setup(hw, &phy_data);
 645
 646         /* Reset the phy to commit changes. */
 647         phy_data |= MII_CR_RESET;
 648
 649         ret_val = e1e_wphy(hw, PHY_CONTROL, phy_data);
 650         if (ret_val)
 651                 return ret_val;
 652
 653         udelay(1);
 654
 655         if (hw->phy.autoneg_wait_to_complete) {
 656                 hw_dbg(hw, "Waiting for forced speed/duplex link "
 657                          "on GG82563 phy.\n");
 658
 659                 ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
 660                                                      100000, &link);
 661                 if (ret_val)
 662                         return ret_val;
 663
 664                 if (!link) {
 665                         /*
 666                          * We didn't get link.
 667                          * Reset the DSP and cross our fingers.
 668                          */
 669                         ret_val = e1000e_phy_reset_dsp(hw);
 670                         if (ret_val)
 671                                 return ret_val;
 672                 }
 673
 674                 /* Try once more */
 675                 ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
 676                                                      100000, &link);
 677                 if (ret_val)
 678                         return ret_val;
 679         }
 680
 681         ret_val = e1e_rphy(hw, GG82563_PHY_MAC_SPEC_CTRL, &phy_data);
 682         if (ret_val)
 683                 return ret_val;
 684
 685         /*
 686          * Resetting the phy means we need to verify the TX_CLK corresponds
 687          * to the link speed.  10Mbps -> 2.5MHz, else 25MHz.
 688          */
 689         phy_data &= ~GG82563_MSCR_TX_CLK_MASK;
 690         if (hw->mac.forced_speed_duplex & E1000_ALL_10_SPEED)
 691                 phy_data |= GG82563_MSCR_TX_CLK_10MBPS_2_5;
 692         else
 693                 phy_data |= GG82563_MSCR_TX_CLK_100MBPS_25;
 694
 695         /*
 696          * In addition, we must re-enable CRS on Tx for both half and full
 697          * duplex.
 698          */
 699         phy_data |= GG82563_MSCR_ASSERT_CRS_ON_TX;
 700         ret_val = e1e_wphy(hw, GG82563_PHY_MAC_SPEC_CTRL, phy_data);
 701
 702         return ret_val;
 703 }
 704
 705 /**
 706  *  e1000_get_cable_length_80003es2lan - Set approximate cable length
 707  *  @hw: pointer to the HW structure
 708  *
 709  *  Find the approximate cable length as measured by the GG82563 PHY.
 710  *  This is a function pointer entry point called by the phy module.
 711  **/
 712 static s32 e1000_get_cable_length_80003es2lan(struct e1000_hw *hw)
 713 {
 714         struct e1000_phy_info *phy = &hw->phy;
 715         s32 ret_val;
 716         u16 phy_data;
 717         u16 index;
 718
 719         ret_val = e1e_rphy(hw, GG82563_PHY_DSP_DISTANCE, &phy_data);
 720         if (ret_val)
 721                 return ret_val;
 722
 723         index = phy_data & GG82563_DSPD_CABLE_LENGTH;
 724         phy->min_cable_length = e1000_gg82563_cable_length_table[index];
 725         phy->max_cable_length = e1000_gg82563_cable_length_table[index+5];
 726
 727         phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
 728
 729         return 0;
 730 }
 731
 732 /**
 733  *  e1000_get_link_up_info_80003es2lan - Report speed and duplex
 734  *  @hw: pointer to the HW structure
 735  *  @speed: pointer to speed buffer
 736  *  @duplex: pointer to duplex buffer
 737  *
 738  *  Retrieve the current speed and duplex configuration.
 739  *  This is a function pointer entry point called by the api module.
 740  **/
 741 static s32 e1000_get_link_up_info_80003es2lan(struct e1000_hw *hw, u16 *speed,
 742                                               u16 *duplex)
 743 {
 744         s32 ret_val;
 745
 746         if (hw->phy.media_type == e1000_media_type_copper) {
 747                 ret_val = e1000e_get_speed_and_duplex_copper(hw,
 748                                                                     speed,
 749                                                                     duplex);
 750                 hw->phy.ops.cfg_on_link_up(hw);
 751         } else {
 752                 ret_val = e1000e_get_speed_and_duplex_fiber_serdes(hw,
 753                                                                   speed,
 754                                                                   duplex);
 755         }
 756
 757         return ret_val;
 758 }
 759
 760 /**
 761  *  e1000_reset_hw_80003es2lan - Reset the ESB2 controller
 762  *  @hw: pointer to the HW structure
 763  *
 764  *  Perform a global reset to the ESB2 controller.
 765  *  This is a function pointer entry point called by the api module.
 766  **/
 767 static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw)
 768 {
 769         u32 ctrl;
 770         u32 icr;
 771         s32 ret_val;
 772
 773         /*
 774          * Prevent the PCI-E bus from sticking if there is no TLP connection
 775          * on the last TLP read/write transaction when MAC is reset.
 776          */
 777         ret_val = e1000e_disable_pcie_master(hw);
 778         if (ret_val)
 779                 hw_dbg(hw, "PCI-E Master disable polling has failed.\n");
 780
 781         hw_dbg(hw, "Masking off all interrupts\n");
 782         ew32(IMC, 0xffffffff);
 783
 784         ew32(RCTL, 0);
 785         ew32(TCTL, E1000_TCTL_PSP);
 786         e1e_flush();
 787
 788         msleep(10);
 789
 790         ctrl = er32(CTRL);
 791
 792         ret_val = e1000_acquire_phy_80003es2lan(hw);
 793         hw_dbg(hw, "Issuing a global reset to MAC\n");
 794         ew32(CTRL, ctrl | E1000_CTRL_RST);
 795         e1000_release_phy_80003es2lan(hw);
 796
 797         ret_val = e1000e_get_auto_rd_done(hw);
 798         if (ret_val)
 799                 /* We don't want to continue accessing MAC registers. */
 800                 return ret_val;
 801
 802         /* Clear any pending interrupt events. */
 803         ew32(IMC, 0xffffffff);
 804         icr = er32(ICR);
 805
 806         return 0;
 807 }
 808
 809 /**
 810  *  e1000_init_hw_80003es2lan - Initialize the ESB2 controller
 811  *  @hw: pointer to the HW structure
 812  *
 813  *  Initialize the hw bits, LED, VFTA, MTA, link and hw counters.
 814  *  This is a function pointer entry point called by the api module.
 815  **/
 816 static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw)
 817 {
 818         struct e1000_mac_info *mac = &hw->mac;
 819         u32 reg_data;
 820         s32 ret_val;
 821         u16 i;
 822
 823         e1000_initialize_hw_bits_80003es2lan(hw);
 824
 825         /* Initialize identification LED */
 826         ret_val = e1000e_id_led_init(hw);
 827         if (ret_val) {
 828                 hw_dbg(hw, "Error initializing identification LED\n");
 829                 return ret_val;
 830         }
 831
 832         /* Disabling VLAN filtering */
 833         hw_dbg(hw, "Initializing the IEEE VLAN\n");
 834         e1000e_clear_vfta(hw);
 835
 836         /* Setup the receive address. */
 837         e1000e_init_rx_addrs(hw, mac->rar_entry_count);
 838
 839         /* Zero out the Multicast HASH table */
 840         hw_dbg(hw, "Zeroing the MTA\n");
 841         for (i = 0; i < mac->mta_reg_count; i++)
 842                 E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
 843
 844         /* Setup link and flow control */
 845         ret_val = e1000e_setup_link(hw);
 846
 847         /* Set the transmit descriptor write-back policy */
 848         reg_data = er32(TXDCTL(0));
 849         reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) |
 850                    E1000_TXDCTL_FULL_TX_DESC_WB | E1000_TXDCTL_COUNT_DESC;
 851         ew32(TXDCTL(0), reg_data);
 852
 853         /* ...for both queues. */
 854         reg_data = er32(TXDCTL(1));
 855         reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) |
 856                    E1000_TXDCTL_FULL_TX_DESC_WB | E1000_TXDCTL_COUNT_DESC;
 857         ew32(TXDCTL(1), reg_data);
 858
 859         /* Enable retransmit on late collisions */
 860         reg_data = er32(TCTL);
 861         reg_data |= E1000_TCTL_RTLC;
 862         ew32(TCTL, reg_data);
 863
 864         /* Configure Gigabit Carry Extend Padding */
 865         reg_data = er32(TCTL_EXT);
 866         reg_data &= ~E1000_TCTL_EXT_GCEX_MASK;
 867         reg_data |= DEFAULT_TCTL_EXT_GCEX_80003ES2LAN;
 868         ew32(TCTL_EXT, reg_data);
 869
 870         /* Configure Transmit Inter-Packet Gap */
 871         reg_data = er32(TIPG);
 872         reg_data &= ~E1000_TIPG_IPGT_MASK;
 873         reg_data |= DEFAULT_TIPG_IPGT_1000_80003ES2LAN;
 874         ew32(TIPG, reg_data);
 875
 876         reg_data = E1000_READ_REG_ARRAY(hw, E1000_FFLT, 0x0001);
 877         reg_data &= ~0x00100000;
 878         E1000_WRITE_REG_ARRAY(hw, E1000_FFLT, 0x0001, reg_data);
 879
 880         /*
 881          * Clear all of the statistics registers (clear on read).  It is
 882          * important that we do this after we have tried to establish link
 883          * because the symbol error count will increment wildly if there
 884          * is no link.
 885          */
 886         e1000_clear_hw_cntrs_80003es2lan(hw);
 887
 888         return ret_val;
 889 }
 890
 891 /**
 892  *  e1000_initialize_hw_bits_80003es2lan - Init hw bits of ESB2
 893  *  @hw: pointer to the HW structure
 894  *
 895  *  Initializes required hardware-dependent bits needed for normal operation.
 896  **/
 897 static void e1000_initialize_hw_bits_80003es2lan(struct e1000_hw *hw)
 898 {
 899         u32 reg;
 900
 901         /* Transmit Descriptor Control 0 */
 902         reg = er32(TXDCTL(0));
 903         reg |= (1 << 22);
 904         ew32(TXDCTL(0), reg);
 905
 906         /* Transmit Descriptor Control 1 */
 907         reg = er32(TXDCTL(1));
 908         reg |= (1 << 22);
 909         ew32(TXDCTL(1), reg);
 910
 911         /* Transmit Arbitration Control 0 */
 912         reg = er32(TARC(0));
 913         reg &= ~(0xF << 27); /* 30:27 */
 914         if (hw->phy.media_type != e1000_media_type_copper)
 915                 reg &= ~(1 << 20);
 916         ew32(TARC(0), reg);
 917
 918         /* Transmit Arbitration Control 1 */
 919         reg = er32(TARC(1));
 920         if (er32(TCTL) & E1000_TCTL_MULR)
 921                 reg &= ~(1 << 28);
 922         else
 923                 reg |= (1 << 28);
 924         ew32(TARC(1), reg);
 925 }
 926
 927 /**
 928  *  e1000_copper_link_setup_gg82563_80003es2lan - Configure GG82563 Link
 929  *  @hw: pointer to the HW structure
 930  *
 931  *  Setup some GG82563 PHY registers for obtaining link
 932  **/
 933 static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw)
 934 {
 935         struct e1000_phy_info *phy = &hw->phy;
 936         s32 ret_val;
 937         u32 ctrl_ext;
 938         u16 data;
 939
 940         ret_val = e1e_rphy(hw, GG82563_PHY_MAC_SPEC_CTRL, &data);
 941         if (ret_val)
 942                 return ret_val;
 943
 944         data |= GG82563_MSCR_ASSERT_CRS_ON_TX;
 945         /* Use 25MHz for both link down and 1000Base-T for Tx clock. */
 946         data |= GG82563_MSCR_TX_CLK_1000MBPS_25;
 947
 948         ret_val = e1e_wphy(hw, GG82563_PHY_MAC_SPEC_CTRL, data);
 949         if (ret_val)
 950                 return ret_val;
 951
 952         /*
 953          * Options:
 954          *   MDI/MDI-X = 0 (default)
 955          *   0 - Auto for all speeds
 956          *   1 - MDI mode
 957          *   2 - MDI-X mode
 958          *   3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
 959          */
 960         ret_val = e1e_rphy(hw, GG82563_PHY_SPEC_CTRL, &data);
 961         if (ret_val)
 962                 return ret_val;
 963
 964         data &= ~GG82563_PSCR_CROSSOVER_MODE_MASK;
 965
 966         switch (phy->mdix) {
 967         case 1:
 968                 data |= GG82563_PSCR_CROSSOVER_MODE_MDI;
 969                 break;
 970         case 2:
 971                 data |= GG82563_PSCR_CROSSOVER_MODE_MDIX;
 972                 break;
 973         case 0:
 974         default:
 975                 data |= GG82563_PSCR_CROSSOVER_MODE_AUTO;
 976                 break;
 977         }
 978
 979         /*
 980          * Options:
 981          *   disable_polarity_correction = 0 (default)
 982          *       Automatic Correction for Reversed Cable Polarity
 983          *   0 - Disabled
 984          *   1 - Enabled
 985          */
 986         data &= ~GG82563_PSCR_POLARITY_REVERSAL_DISABLE;
 987         if (phy->disable_polarity_correction)
 988                 data |= GG82563_PSCR_POLARITY_REVERSAL_DISABLE;
 989
 990         ret_val = e1e_wphy(hw, GG82563_PHY_SPEC_CTRL, data);
 991         if (ret_val)
 992                 return ret_val;
 993
 994         /* SW Reset the PHY so all changes take effect */
 995         ret_val = e1000e_commit_phy(hw);
 996         if (ret_val) {
 997                 hw_dbg(hw, "Error Resetting the PHY\n");
 998                 return ret_val;
 999         }
1000
1001         /* Bypass Rx and Tx FIFO's */
1002         ret_val = e1000_write_kmrn_reg_80003es2lan(hw,
1003                                         E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL,
1004                                         E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS |
1005                                         E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS);
1006         if (ret_val)
1007                 return ret_val;
1008
1009         ret_val = e1000_read_kmrn_reg_80003es2lan(hw,
1010                                        E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE,
1011                                        &data);
1012         if (ret_val)
1013                 return ret_val;
1014         data |= E1000_KMRNCTRLSTA_OPMODE_E_IDLE;
1015         ret_val = e1000_write_kmrn_reg_80003es2lan(hw,
1016                                         E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE,
1017                                         data);
1018         if (ret_val)
1019                 return ret_val;
1020
1021         ret_val = e1e_rphy(hw, GG82563_PHY_SPEC_CTRL_2, &data);
1022         if (ret_val)
1023                 return ret_val;
1024
1025         data &= ~GG82563_PSCR2_REVERSE_AUTO_NEG;
1026         ret_val = e1e_wphy(hw, GG82563_PHY_SPEC_CTRL_2, data);
1027         if (ret_val)
1028                 return ret_val;
1029
1030         ctrl_ext = er32(CTRL_EXT);
1031         ctrl_ext &= ~(E1000_CTRL_EXT_LINK_MODE_MASK);
1032         ew32(CTRL_EXT, ctrl_ext);
1033
1034         ret_val = e1e_rphy(hw, GG82563_PHY_PWR_MGMT_CTRL, &data);
1035         if (ret_val)
1036                 return ret_val;
1037
1038         /*
1039          * Do not init these registers when the HW is in IAMT mode, since the
1040          * firmware will have already initialized them.  We only initialize
1041          * them if the HW is not in IAMT mode.
1042          */
1043         if (!e1000e_check_mng_mode(hw)) {
1044                 /* Enable Electrical Idle on the PHY */
1045                 data |= GG82563_PMCR_ENABLE_ELECTRICAL_IDLE;
1046                 ret_val = e1e_wphy(hw, GG82563_PHY_PWR_MGMT_CTRL, data);
1047                 if (ret_val)
1048                         return ret_val;
1049
1050                 ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, &data);
1051                 if (ret_val)
1052                         return ret_val;
1053
1054                 data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
1055                 ret_val = e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, data);
1056                 if (ret_val)
1057                         return ret_val;
1058         }
1059
1060         /*
1061          * Workaround: Disable padding in Kumeran interface in the MAC
1062          * and in the PHY to avoid CRC errors.
1063          */
1064         ret_val = e1e_rphy(hw, GG82563_PHY_INBAND_CTRL, &data);
1065         if (ret_val)
1066                 return ret_val;
1067
1068         data |= GG82563_ICR_DIS_PADDING;
1069         ret_val = e1e_wphy(hw, GG82563_PHY_INBAND_CTRL, data);
1070         if (ret_val)
1071                 return ret_val;
1072
1073         return 0;
1074 }
1075
1076 /**
1077  *  e1000_setup_copper_link_80003es2lan - Setup Copper Link for ESB2
1078  *  @hw: pointer to the HW structure
1079  *
1080  *  Essentially a wrapper for setting up all things "copper" related.
1081  *  This is a function pointer entry point called by the mac module.
1082  **/
1083 static s32 e1000_setup_copper_link_80003es2lan(struct e1000_hw *hw)
1084 {
1085         u32 ctrl;
1086         s32 ret_val;
1087         u16 reg_data;
1088
1089         ctrl = er32(CTRL);
1090         ctrl |= E1000_CTRL_SLU;
1091         ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
1092         ew32(CTRL, ctrl);
1093
1094         /*
1095          * Set the mac to wait the maximum time between each
1096          * iteration and increase the max iterations when
1097          * polling the phy; this fixes erroneous timeouts at 10Mbps.
1098          */
1099         ret_val = e1000_write_kmrn_reg_80003es2lan(hw, GG82563_REG(0x34, 4),
1100                                                    0xFFFF);
1101         if (ret_val)
1102                 return ret_val;
1103         ret_val = e1000_read_kmrn_reg_80003es2lan(hw, GG82563_REG(0x34, 9),
1104                                                   &reg_data);
1105         if (ret_val)
1106                 return ret_val;
1107         reg_data |= 0x3F;
1108         ret_val = e1000_write_kmrn_reg_80003es2lan(hw, GG82563_REG(0x34, 9),
1109                                                    reg_data);
1110         if (ret_val)
1111                 return ret_val;
1112         ret_val = e1000_read_kmrn_reg_80003es2lan(hw,
1113                                       E1000_KMRNCTRLSTA_OFFSET_INB_CTRL,
1114                                       &reg_data);
1115         if (ret_val)
1116                 return ret_val;
1117         reg_data |= E1000_KMRNCTRLSTA_INB_CTRL_DIS_PADDING;
1118         ret_val = e1000_write_kmrn_reg_80003es2lan(hw,
1119                                         E1000_KMRNCTRLSTA_OFFSET_INB_CTRL,
1120                                         reg_data);
1121         if (ret_val)
1122                 return ret_val;
1123
1124         ret_val = e1000_copper_link_setup_gg82563_80003es2lan(hw);
1125         if (ret_val)
1126                 return ret_val;
1127
1128         ret_val = e1000e_setup_copper_link(hw);
1129
1130         return 0;
1131 }
1132
1133 /**
1134  *  e1000_cfg_on_link_up_80003es2lan - es2 link configuration after link-up
1135  *  @hw: pointer to the HW structure
1136  *  @duplex: current duplex setting
1137  *
1138  *  Configure the KMRN interface by applying last minute quirks for
1139  *  10/100 operation.
1140  **/
1141 static s32 e1000_cfg_on_link_up_80003es2lan(struct e1000_hw *hw)
1142 {
1143         s32 ret_val = 0;
1144         u16 speed;
1145         u16 duplex;
1146
1147         if (hw->phy.media_type == e1000_media_type_copper) {
1148                 ret_val = e1000e_get_speed_and_duplex_copper(hw, &speed,
1149                                                              &duplex);
1150                 if (ret_val)
1151                         return ret_val;
1152
1153                 if (speed == SPEED_1000)
1154                         ret_val = e1000_cfg_kmrn_1000_80003es2lan(hw);
1155                 else
1156                         ret_val = e1000_cfg_kmrn_10_100_80003es2lan(hw, duplex);
1157         }
1158
1159         return ret_val;
1160 }
1161
1162 /**
1163  *  e1000_cfg_kmrn_10_100_80003es2lan - Apply "quirks" for 10/100 operation
1164  *  @hw: pointer to the HW structure
1165  *  @duplex: current duplex setting
1166  *
1167  *  Configure the KMRN interface by applying last minute quirks for
1168  *  10/100 operation.
1169  **/
1170 static s32 e1000_cfg_kmrn_10_100_80003es2lan(struct e1000_hw *hw, u16 duplex)
1171 {
1172         s32 ret_val;
1173         u32 tipg;
1174         u32 i = 0;
1175         u16 reg_data, reg_data2;
1176
1177         reg_data = E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT;
1178         ret_val = e1000_write_kmrn_reg_80003es2lan(hw,
1179                                        E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
1180                                        reg_data);
1181         if (ret_val)
1182                 return ret_val;
1183
1184         /* Configure Transmit Inter-Packet Gap */
1185         tipg = er32(TIPG);
1186         tipg &= ~E1000_TIPG_IPGT_MASK;
1187         tipg |= DEFAULT_TIPG_IPGT_10_100_80003ES2LAN;
1188         ew32(TIPG, tipg);
1189
1190         do {
1191                 ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, &reg_data);
1192                 if (ret_val)
1193                         return ret_val;
1194
1195                 ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, &reg_data2);
1196                 if (ret_val)
1197                         return ret_val;
1198                 i++;
1199         } while ((reg_data != reg_data2) && (i < GG82563_MAX_KMRN_RETRY));
1200
1201         if (duplex == HALF_DUPLEX)
1202                 reg_data |= GG82563_KMCR_PASS_FALSE_CARRIER;
1203         else
1204                 reg_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
1205
1206         ret_val = e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data);
1207
1208         return 0;
1209 }
1210
1211 /**
1212  *  e1000_cfg_kmrn_1000_80003es2lan - Apply "quirks" for gigabit operation
1213  *  @hw: pointer to the HW structure
1214  *
1215  *  Configure the KMRN interface by applying last minute quirks for
1216  *  gigabit operation.
1217  **/
1218 static s32 e1000_cfg_kmrn_1000_80003es2lan(struct e1000_hw *hw)
1219 {
1220         s32 ret_val;
1221         u16 reg_data, reg_data2;
1222         u32 tipg;
1223         u32 i = 0;
1224
1225         reg_data = E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT;
1226         ret_val = e1000_write_kmrn_reg_80003es2lan(hw,
1227                                        E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
1228                                        reg_data);
1229         if (ret_val)
1230                 return ret_val;
1231
1232         /* Configure Transmit Inter-Packet Gap */
1233         tipg = er32(TIPG);
1234         tipg &= ~E1000_TIPG_IPGT_MASK;
1235         tipg |= DEFAULT_TIPG_IPGT_1000_80003ES2LAN;
1236         ew32(TIPG, tipg);
1237
1238         do {
1239                 ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, &reg_data);
1240                 if (ret_val)
1241                         return ret_val;
1242
1243                 ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, &reg_data2);
1244                 if (ret_val)
1245                         return ret_val;
1246                 i++;
1247         } while ((reg_data != reg_data2) && (i < GG82563_MAX_KMRN_RETRY));
1248
1249         reg_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
1250         ret_val = e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data);
1251
1252         return ret_val;
1253 }
1254
1255 /**
1256  *  e1000_read_kmrn_reg_80003es2lan - Read kumeran register
1257  *  @hw: pointer to the HW structure
1258  *  @offset: register offset to be read
1259  *  @data: pointer to the read data
1260  *
1261  *  Acquire semaphore, then read the PHY register at offset
1262  *  using the kumeran interface.  The information retrieved is stored in data.
1263  *  Release the semaphore before exiting.
1264  **/
1265 static s32 e1000_read_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
1266                                            u16 *data)
1267 {
1268         u32 kmrnctrlsta;
1269         s32 ret_val = 0;
1270
1271         ret_val = e1000_acquire_mac_csr_80003es2lan(hw);
1272         if (ret_val)
1273                 return ret_val;
1274
1275         kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
1276                        E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN;
1277         ew32(KMRNCTRLSTA, kmrnctrlsta);
1278
1279         udelay(2);
1280
1281         kmrnctrlsta = er32(KMRNCTRLSTA);
1282         *data = (u16)kmrnctrlsta;
1283
1284         e1000_release_mac_csr_80003es2lan(hw);
1285
1286         return ret_val;
1287 }
1288
1289 /**
1290  *  e1000_write_kmrn_reg_80003es2lan - Write kumeran register
1291  *  @hw: pointer to the HW structure
1292  *  @offset: register offset to write to
1293  *  @data: data to write at register offset
1294  *
1295  *  Acquire semaphore, then write the data to PHY register
1296  *  at the offset using the kumeran interface.  Release semaphore
1297  *  before exiting.
1298  **/
1299 static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
1300                                             u16 data)
1301 {
1302         u32 kmrnctrlsta;
1303         s32 ret_val = 0;
1304
1305         ret_val = e1000_acquire_mac_csr_80003es2lan(hw);
1306         if (ret_val)
1307                 return ret_val;
1308
1309         kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
1310                        E1000_KMRNCTRLSTA_OFFSET) | data;
1311         ew32(KMRNCTRLSTA, kmrnctrlsta);
1312
1313         udelay(2);
1314
1315         e1000_release_mac_csr_80003es2lan(hw);
1316
1317         return ret_val;
1318 }
1319
1320 /**
1321  *  e1000_clear_hw_cntrs_80003es2lan - Clear device specific hardware counters
1322  *  @hw: pointer to the HW structure
1323  *
1324  *  Clears the hardware counters by reading the counter registers.
1325  **/
1326 static void e1000_clear_hw_cntrs_80003es2lan(struct e1000_hw *hw)
1327 {
1328         u32 temp;
1329
1330         e1000e_clear_hw_cntrs_base(hw);
1331
1332         temp = er32(PRC64);
1333         temp = er32(PRC127);
1334         temp = er32(PRC255);
1335         temp = er32(PRC511);
1336         temp = er32(PRC1023);
1337         temp = er32(PRC1522);
1338         temp = er32(PTC64);
1339         temp = er32(PTC127);
1340         temp = er32(PTC255);
1341         temp = er32(PTC511);
1342         temp = er32(PTC1023);
1343         temp = er32(PTC1522);
1344
1345         temp = er32(ALGNERRC);
1346         temp = er32(RXERRC);
1347         temp = er32(TNCRS);
1348         temp = er32(CEXTERR);
1349         temp = er32(TSCTC);
1350         temp = er32(TSCTFC);
1351
1352         temp = er32(MGTPRC);
1353         temp = er32(MGTPDC);
1354         temp = er32(MGTPTC);
1355
1356         temp = er32(IAC);
1357         temp = er32(ICRXOC);
1358
1359         temp = er32(ICRXPTC);
1360         temp = er32(ICRXATC);
1361         temp = er32(ICTXPTC);
1362         temp = er32(ICTXATC);
1363         temp = er32(ICTXQEC);
1364         temp = er32(ICTXQMTC);
1365         temp = er32(ICRXDMTC);
1366 }
1367
1368 static struct e1000_mac_operations es2_mac_ops = {
1369         .check_mng_mode         = e1000e_check_mng_mode_generic,
1370         /* check_for_link dependent on media type */
1371         .cleanup_led            = e1000e_cleanup_led_generic,
1372         .clear_hw_cntrs         = e1000_clear_hw_cntrs_80003es2lan,
1373         .get_bus_info           = e1000e_get_bus_info_pcie,
1374         .get_link_up_info       = e1000_get_link_up_info_80003es2lan,
1375         .led_on                 = e1000e_led_on_generic,
1376         .led_off                = e1000e_led_off_generic,
1377         .update_mc_addr_list    = e1000e_update_mc_addr_list_generic,
1378         .reset_hw               = e1000_reset_hw_80003es2lan,
1379         .init_hw                = e1000_init_hw_80003es2lan,
1380         .setup_link             = e1000e_setup_link,
1381         /* setup_physical_interface dependent on media type */
1382 };
1383
1384 static struct e1000_phy_operations es2_phy_ops = {
1385         .acquire_phy            = e1000_acquire_phy_80003es2lan,
1386         .check_reset_block      = e1000e_check_reset_block_generic,
1387         .commit_phy             = e1000e_phy_sw_reset,
1388         .force_speed_duplex     = e1000_phy_force_speed_duplex_80003es2lan,
1389         .get_cfg_done           = e1000_get_cfg_done_80003es2lan,
1390         .get_cable_length       = e1000_get_cable_length_80003es2lan,
1391         .get_phy_info           = e1000e_get_phy_info_m88,
1392         .read_phy_reg           = e1000_read_phy_reg_gg82563_80003es2lan,
1393         .release_phy            = e1000_release_phy_80003es2lan,
1394         .reset_phy              = e1000e_phy_hw_reset_generic,
1395         .set_d0_lplu_state      = NULL,
1396         .set_d3_lplu_state      = e1000e_set_d3_lplu_state,
1397         .write_phy_reg          = e1000_write_phy_reg_gg82563_80003es2lan,
1398         .cfg_on_link_up         = e1000_cfg_on_link_up_80003es2lan,
1399 };
1400
1401 static struct e1000_nvm_operations es2_nvm_ops = {
1402         .acquire_nvm            = e1000_acquire_nvm_80003es2lan,
1403         .read_nvm               = e1000e_read_nvm_eerd,
1404         .release_nvm            = e1000_release_nvm_80003es2lan,
1405         .update_nvm             = e1000e_update_nvm_checksum_generic,
1406         .valid_led_default      = e1000e_valid_led_default,
1407         .validate_nvm           = e1000e_validate_nvm_checksum_generic,
1408         .write_nvm              = e1000_write_nvm_80003es2lan,
1409 };
1410
1411 struct e1000_info e1000_es2_info = {
1412         .mac                    = e1000_80003es2lan,
1413         .flags                  = FLAG_HAS_HW_VLAN_FILTER
1414                                   | FLAG_HAS_JUMBO_FRAMES
1415                                   | FLAG_HAS_WOL
1416                                   | FLAG_APME_IN_CTRL3
1417                                   | FLAG_RX_CSUM_ENABLED
1418                                   | FLAG_HAS_CTRLEXT_ON_LOAD
1419                                   | FLAG_RX_NEEDS_RESTART /* errata */
1420                                   | FLAG_TARC_SET_BIT_ZERO /* errata */
1421                                   | FLAG_APME_CHECK_PORT_B
1422                                   | FLAG_DISABLE_FC_PAUSE_TIME /* errata */
1423                                   | FLAG_TIPG_MEDIUM_FOR_80003ESLAN,
1424         .pba                    = 38,
1425         .get_variants           = e1000_get_variants_80003es2lan,
1426         .mac_ops                = &es2_mac_ops,
1427         .phy_ops                = &es2_phy_ops,
1428         .nvm_ops                = &es2_nvm_ops,
1429 };
1430