git.oblomov.eu Git - linux-2.6/blob - drivers/staging/epl/Edrv8139.c

   1 /****************************************************************************
   2
   3   (c) SYSTEC electronic GmbH, D-07973 Greiz, August-Bebel-Str. 29
   4       www.systec-electronic.com
   5
   6   Project:      openPOWERLINK
   7
   8   Description:  Ethernet driver for Realtek RTL8139 chips
   9                 except the RTL8139C+, because it has a different
  10                 Tx descriptor handling.
  11
  12   License:
  13
  14     Redistribution and use in source and binary forms, with or without
  15     modification, are permitted provided that the following conditions
  16     are met:
  17
  18     1. Redistributions of source code must retain the above copyright
  19        notice, this list of conditions and the following disclaimer.
  20
  21     2. Redistributions in binary form must reproduce the above copyright
  22        notice, this list of conditions and the following disclaimer in the
  23        documentation and/or other materials provided with the distribution.
  24
  25     3. Neither the name of SYSTEC electronic GmbH nor the names of its
  26        contributors may be used to endorse or promote products derived
  27        from this software without prior written permission. For written
  28        permission, please contact info@systec-electronic.com.
  29
  30     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  31     "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  32     LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  33     FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
  34     COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
  35     INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
  36     BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  37     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  38     CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  39     LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
  40     ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41     POSSIBILITY OF SUCH DAMAGE.
  42
  43     Severability Clause:
  44
  45         If a provision of this License is or becomes illegal, invalid or
  46         unenforceable in any jurisdiction, that shall not affect:
  47         1. the validity or enforceability in that jurisdiction of any other
  48            provision of this License; or
  49         2. the validity or enforceability in other jurisdictions of that or
  50            any other provision of this License.
  51
  52   -------------------------------------------------------------------------
  53
  54                 $RCSfile: Edrv8139.c,v $
  55
  56                 $Author: D.Krueger $
  57
  58                 $Revision: 1.10 $  $Date: 2008/11/21 09:00:38 $
  59
  60                 $State: Exp $
  61
  62                 Build Environment:
  63                 Dev C++ and GNU-Compiler for m68k
  64
  65   -------------------------------------------------------------------------
  66
  67   Revision History:
  68
  69   2008/02/05 d.k.:   start of implementation
  70
  71 ****************************************************************************/
  72
  73 #include "global.h"
  74 #include "EplInc.h"
  75 #include "edrv.h"
  76
  77 #include <linux/module.h>
  78 #include <linux/kernel.h>
  79 #include <linux/pci.h>
  80 #include <linux/interrupt.h>
  81 #include <linux/init.h>
  82 #include <linux/errno.h>
  83 #include <linux/major.h>
  84 #include <linux/version.h>
  85 #include <asm/io.h>
  86 #include <asm/uaccess.h>
  87 #include <asm/atomic.h>
  88 #include <asm/irq.h>
  89 #include <linux/sched.h>
  90 #include <linux/delay.h>
  91
  92 /***************************************************************************/
  93 /*                                                                         */
  94 /*                                                                         */
  95 /*          G L O B A L   D E F I N I T I O N S                            */
  96 /*                                                                         */
  97 /*                                                                         */
  98 /***************************************************************************/
  99
 100 // Buffer handling:
 101 // All buffers are created statically (i.e. at compile time resp. at
 102 // initialisation via kmalloc() ) and not dynamically on request (i.e. via
 103 // EdrvAllocTxMsgBuffer().
 104 // EdrvAllocTxMsgBuffer() searches for an unused buffer which is large enough.
 105 // EdrvInit() may allocate some buffers with sizes less than maximum frame
 106 // size (i.e. 1514 bytes), e.g. for SoC, SoA, StatusResponse, IdentResponse,
 107 // NMT requests / commands. The less the size of the buffer the less the
 108 // number of the buffer.
 109
 110 //---------------------------------------------------------------------------
 111 // const defines
 112 //---------------------------------------------------------------------------
 113
 114 #ifndef EDRV_MAX_TX_BUFFERS
 115 #define EDRV_MAX_TX_BUFFERS     20
 116 #endif
 117
 118 #define EDRV_MAX_FRAME_SIZE     0x600
 119
 120 #define EDRV_RX_BUFFER_SIZE     0x8610  // 32 kB + 16 Byte + 1,5 kB (WRAP is enabled)
 121 #define EDRV_RX_BUFFER_LENGTH   (EDRV_RX_BUFFER_SIZE & 0xF800)  // buffer size cut down to 2 kB alignment
 122
 123 #define EDRV_TX_BUFFER_SIZE     (EDRV_MAX_TX_BUFFERS * EDRV_MAX_FRAME_SIZE)     // n * (MTU + 14 + 4)
 124
 125 #define DRV_NAME                "epl"
 126
 127 #define EDRV_REGW_INT_MASK      0x3C    // interrupt mask register
 128 #define EDRV_REGW_INT_STATUS    0x3E    // interrupt status register
 129 #define EDRV_REGW_INT_ROK       0x0001  // Receive OK interrupt
 130 #define EDRV_REGW_INT_RER       0x0002  // Receive error interrupt
 131 #define EDRV_REGW_INT_TOK       0x0004  // Transmit OK interrupt
 132 #define EDRV_REGW_INT_TER       0x0008  // Transmit error interrupt
 133 #define EDRV_REGW_INT_RXOVW     0x0010  // Rx buffer overflow interrupt
 134 #define EDRV_REGW_INT_PUN       0x0020  // Packet underrun/ link change interrupt
 135 #define EDRV_REGW_INT_FOVW      0x0040  // Rx FIFO overflow interrupt
 136 #define EDRV_REGW_INT_LENCHG    0x2000  // Cable length change interrupt
 137 #define EDRV_REGW_INT_TIMEOUT   0x4000  // Time out interrupt
 138 #define EDRV_REGW_INT_SERR      0x8000  // System error interrupt
 139 #define EDRV_REGW_INT_MASK_DEF  (EDRV_REGW_INT_ROK \
 140                                  | EDRV_REGW_INT_RER \
 141                                  | EDRV_REGW_INT_TOK \
 142                                  | EDRV_REGW_INT_TER \
 143                                  | EDRV_REGW_INT_RXOVW \
 144                                  | EDRV_REGW_INT_FOVW \
 145                                  | EDRV_REGW_INT_PUN \
 146                                  | EDRV_REGW_INT_TIMEOUT \
 147                                  | EDRV_REGW_INT_SERR)  // default interrupt mask
 148
 149 #define EDRV_REGB_COMMAND       0x37    // command register
 150 #define EDRV_REGB_COMMAND_RST   0x10
 151 #define EDRV_REGB_COMMAND_RE    0x08
 152 #define EDRV_REGB_COMMAND_TE    0x04
 153 #define EDRV_REGB_COMMAND_BUFE  0x01
 154
 155 #define EDRV_REGB_CMD9346       0x50    // 93C46 command register
 156 #define EDRV_REGB_CMD9346_LOCK  0x00    // lock configuration registers
 157 #define EDRV_REGB_CMD9346_UNLOCK 0xC0   // unlock configuration registers
 158
 159 #define EDRV_REGDW_RCR          0x44    // Rx configuration register
 160 #define EDRV_REGDW_RCR_NO_FTH   0x0000E000      // no receive FIFO threshold
 161 #define EDRV_REGDW_RCR_RBLEN32K 0x00001000      // 32 kB receive buffer
 162 #define EDRV_REGDW_RCR_MXDMAUNL 0x00000700      // unlimited maximum DMA burst size
 163 #define EDRV_REGDW_RCR_NOWRAP   0x00000080      // do not wrap frame at end of buffer
 164 #define EDRV_REGDW_RCR_AER      0x00000020      // accept error frames (CRC, alignment, collided)
 165 #define EDRV_REGDW_RCR_AR       0x00000010      // accept runt
 166 #define EDRV_REGDW_RCR_AB       0x00000008      // accept broadcast frames
 167 #define EDRV_REGDW_RCR_AM       0x00000004      // accept multicast frames
 168 #define EDRV_REGDW_RCR_APM      0x00000002      // accept physical match frames
 169 #define EDRV_REGDW_RCR_AAP      0x00000001      // accept all frames
 170 #define EDRV_REGDW_RCR_DEF      (EDRV_REGDW_RCR_NO_FTH \
 171                                  | EDRV_REGDW_RCR_RBLEN32K \
 172                                  | EDRV_REGDW_RCR_MXDMAUNL \
 173                                  | EDRV_REGDW_RCR_NOWRAP \
 174                                  | EDRV_REGDW_RCR_AB \
 175                                  | EDRV_REGDW_RCR_AM \
 176                                  | EDRV_REGDW_RCR_APM)  // default value
 177
 178 #define EDRV_REGDW_TCR          0x40    // Tx configuration register
 179 #define EDRV_REGDW_TCR_VER_MASK 0x7CC00000      // mask for hardware version
 180 #define EDRV_REGDW_TCR_VER_C    0x74000000      // RTL8139C
 181 #define EDRV_REGDW_TCR_VER_D    0x74400000      // RTL8139D
 182 #define EDRV_REGDW_TCR_IFG96    0x03000000      // default interframe gap (960 ns)
 183 #define EDRV_REGDW_TCR_CRC      0x00010000      // disable appending of CRC by the controller
 184 #define EDRV_REGDW_TCR_MXDMAUNL 0x00000700      // maximum DMA burst size of 2048 b
 185 #define EDRV_REGDW_TCR_TXRETRY  0x00000000      // 16 retries
 186 #define EDRV_REGDW_TCR_DEF      (EDRV_REGDW_TCR_IFG96 \
 187                                  | EDRV_REGDW_TCR_MXDMAUNL \
 188                                  | EDRV_REGDW_TCR_TXRETRY)
 189
 190 #define EDRV_REGW_MULINT        0x5C    // multiple interrupt select register
 191
 192 #define EDRV_REGDW_MPC          0x4C    // missed packet counter register
 193
 194 #define EDRV_REGDW_TSAD0        0x20    // Transmit start address of descriptor 0
 195 #define EDRV_REGDW_TSAD1        0x24    // Transmit start address of descriptor 1
 196 #define EDRV_REGDW_TSAD2        0x28    // Transmit start address of descriptor 2
 197 #define EDRV_REGDW_TSAD3        0x2C    // Transmit start address of descriptor 3
 198 #define EDRV_REGDW_TSD0         0x10    // Transmit status of descriptor 0
 199 #define EDRV_REGDW_TSD_CRS      0x80000000      // Carrier sense lost
 200 #define EDRV_REGDW_TSD_TABT     0x40000000      // Transmit Abort
 201 #define EDRV_REGDW_TSD_OWC      0x20000000      // Out of window collision
 202 #define EDRV_REGDW_TSD_TXTH_DEF 0x00020000      // Transmit FIFO threshold of 64 bytes
 203 #define EDRV_REGDW_TSD_TOK      0x00008000      // Transmit OK
 204 #define EDRV_REGDW_TSD_TUN      0x00004000      // Transmit FIFO underrun
 205 #define EDRV_REGDW_TSD_OWN      0x00002000      // Owner
 206
 207 #define EDRV_REGDW_RBSTART      0x30    // Receive buffer start address
 208
 209 #define EDRV_REGW_CAPR          0x38    // Current address of packet read
 210
 211 #define EDRV_REGDW_IDR0         0x00    // ID register 0
 212 #define EDRV_REGDW_IDR4         0x04    // ID register 4
 213
 214 #define EDRV_REGDW_MAR0         0x08    // Multicast address register 0
 215 #define EDRV_REGDW_MAR4         0x0C    // Multicast address register 4
 216
 217 // defines for the status word in the receive buffer
 218 #define EDRV_RXSTAT_MAR         0x8000  // Multicast address received
 219 #define EDRV_RXSTAT_PAM         0x4000  // Physical address matched
 220 #define EDRV_RXSTAT_BAR         0x2000  // Broadcast address received
 221 #define EDRV_RXSTAT_ISE         0x0020  // Invalid symbol error
 222 #define EDRV_RXSTAT_RUNT        0x0010  // Runt packet received
 223 #define EDRV_RXSTAT_LONG        0x0008  // Long packet
 224 #define EDRV_RXSTAT_CRC         0x0004  // CRC error
 225 #define EDRV_RXSTAT_FAE         0x0002  // Frame alignment error
 226 #define EDRV_RXSTAT_ROK         0x0001  // Receive OK
 227
 228 #define EDRV_REGDW_WRITE(dwReg, dwVal)  writel(dwVal, EdrvInstance_l.m_pIoAddr + dwReg)
 229 #define EDRV_REGW_WRITE(dwReg, wVal)    writew(wVal, EdrvInstance_l.m_pIoAddr + dwReg)
 230 #define EDRV_REGB_WRITE(dwReg, bVal)    writeb(bVal, EdrvInstance_l.m_pIoAddr + dwReg)
 231 #define EDRV_REGDW_READ(dwReg)          readl(EdrvInstance_l.m_pIoAddr + dwReg)
 232 #define EDRV_REGW_READ(dwReg)           readw(EdrvInstance_l.m_pIoAddr + dwReg)
 233 #define EDRV_REGB_READ(dwReg)           readb(EdrvInstance_l.m_pIoAddr + dwReg)
 234
 235 // TracePoint support for realtime-debugging
 236 #ifdef _DBG_TRACE_POINTS_
 237 void PUBLIC TgtDbgSignalTracePoint(BYTE bTracePointNumber_p);
 238 void PUBLIC TgtDbgPostTraceValue(DWORD dwTraceValue_p);
 239 #define TGT_DBG_SIGNAL_TRACE_POINT(p)   TgtDbgSignalTracePoint(p)
 240 #define TGT_DBG_POST_TRACE_VALUE(v)     TgtDbgPostTraceValue(v)
 241 #else
 242 #define TGT_DBG_SIGNAL_TRACE_POINT(p)
 243 #define TGT_DBG_POST_TRACE_VALUE(v)
 244 #endif
 245
 246 #define EDRV_COUNT_SEND                 TGT_DBG_SIGNAL_TRACE_POINT(2)
 247 #define EDRV_COUNT_TIMEOUT              TGT_DBG_SIGNAL_TRACE_POINT(3)
 248 #define EDRV_COUNT_PCI_ERR              TGT_DBG_SIGNAL_TRACE_POINT(4)
 249 #define EDRV_COUNT_TX                   TGT_DBG_SIGNAL_TRACE_POINT(5)
 250 #define EDRV_COUNT_RX                   TGT_DBG_SIGNAL_TRACE_POINT(6)
 251 #define EDRV_COUNT_LATECOLLISION        TGT_DBG_SIGNAL_TRACE_POINT(10)
 252 #define EDRV_COUNT_TX_COL_RL            TGT_DBG_SIGNAL_TRACE_POINT(11)
 253 #define EDRV_COUNT_TX_FUN               TGT_DBG_SIGNAL_TRACE_POINT(12)
 254 #define EDRV_COUNT_TX_ERR               TGT_DBG_SIGNAL_TRACE_POINT(13)
 255 #define EDRV_COUNT_RX_CRC               TGT_DBG_SIGNAL_TRACE_POINT(14)
 256 #define EDRV_COUNT_RX_ERR               TGT_DBG_SIGNAL_TRACE_POINT(15)
 257 #define EDRV_COUNT_RX_FOVW              TGT_DBG_SIGNAL_TRACE_POINT(16)
 258 #define EDRV_COUNT_RX_PUN               TGT_DBG_SIGNAL_TRACE_POINT(17)
 259 #define EDRV_COUNT_RX_FAE               TGT_DBG_SIGNAL_TRACE_POINT(18)
 260 #define EDRV_COUNT_RX_OVW               TGT_DBG_SIGNAL_TRACE_POINT(19)
 261
 262 #define EDRV_TRACE_CAPR(x)              TGT_DBG_POST_TRACE_VALUE(((x) & 0xFFFF) | 0x06000000)
 263 #define EDRV_TRACE_RX_CRC(x)            TGT_DBG_POST_TRACE_VALUE(((x) & 0xFFFF) | 0x0E000000)
 264 #define EDRV_TRACE_RX_ERR(x)            TGT_DBG_POST_TRACE_VALUE(((x) & 0xFFFF) | 0x0F000000)
 265 #define EDRV_TRACE_RX_PUN(x)            TGT_DBG_POST_TRACE_VALUE(((x) & 0xFFFF) | 0x11000000)
 266 #define EDRV_TRACE(x)                   TGT_DBG_POST_TRACE_VALUE(((x) & 0xFFFF0000) | 0x0000FEC0)
 267
 268 //---------------------------------------------------------------------------
 269 // local types
 270 //---------------------------------------------------------------------------
 271 /*
 272 typedef struct
 273 {
 274     BOOL            m_fUsed;
 275     unsigned int    m_uiSize;
 276     MCD_bufDescFec *m_pBufDescr;
 277
 278 } tEdrvTxBufferIntern;
 279 */
 280
 281 // Private structure
 282 typedef struct {
 283         struct pci_dev *m_pPciDev;      // pointer to PCI device structure
 284         void *m_pIoAddr;        // pointer to register space of Ethernet controller
 285         BYTE *m_pbRxBuf;        // pointer to Rx buffer
 286         dma_addr_t m_pRxBufDma;
 287         BYTE *m_pbTxBuf;        // pointer to Tx buffer
 288         dma_addr_t m_pTxBufDma;
 289         BOOL m_afTxBufUsed[EDRV_MAX_TX_BUFFERS];
 290         unsigned int m_uiCurTxDesc;
 291
 292         tEdrvInitParam m_InitParam;
 293         tEdrvTxBuffer *m_pLastTransmittedTxBuffer;
 294
 295 } tEdrvInstance;
 296
 297 //---------------------------------------------------------------------------
 298 // local function prototypes
 299 //---------------------------------------------------------------------------
 300
 301 static int EdrvInitOne(struct pci_dev *pPciDev,
 302                        const struct pci_device_id *pId);
 303
 304 static void EdrvRemoveOne(struct pci_dev *pPciDev);
 305
 306 //---------------------------------------------------------------------------
 307 // modul globale vars
 308 //---------------------------------------------------------------------------
 309 // buffers and buffer descriptors and pointers
 310
 311 static struct pci_device_id aEdrvPciTbl[] = {
 312         {0x10ec, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 313         {0,}
 314 };
 315
 316 MODULE_DEVICE_TABLE(pci, aEdrvPciTbl);
 317
 318 static tEdrvInstance EdrvInstance_l;
 319
 320 static struct pci_driver EdrvDriver = {
 321         .name = DRV_NAME,
 322         .id_table = aEdrvPciTbl,
 323         .probe = EdrvInitOne,
 324         .remove = EdrvRemoveOne,
 325 };
 326
 327 /***************************************************************************/
 328 /*                                                                         */
 329 /*                                                                         */
 330 /*          C L A S S  <edrv>                                              */
 331 /*                                                                         */
 332 /*                                                                         */
 333 /***************************************************************************/
 334 //
 335 // Description:
 336 //
 337 //
 338 /***************************************************************************/
 339
 340 //=========================================================================//
 341 //                                                                         //
 342 //          P R I V A T E   D E F I N I T I O N S                          //
 343 //                                                                         //
 344 //=========================================================================//
 345
 346 //---------------------------------------------------------------------------
 347 // const defines
 348 //---------------------------------------------------------------------------
 349
 350 //---------------------------------------------------------------------------
 351 // local types
 352 //---------------------------------------------------------------------------
 353
 354 //---------------------------------------------------------------------------
 355 // local vars
 356 //---------------------------------------------------------------------------
 357
 358 //---------------------------------------------------------------------------
 359 // local function prototypes
 360 //---------------------------------------------------------------------------
 361
 362 static BYTE EdrvCalcHash(BYTE * pbMAC_p);
 363
 364 //---------------------------------------------------------------------------
 365 //
 366 // Function:    EdrvInit
 367 //
 368 // Description: function for init of the Ethernet controller
 369 //
 370 // Parameters:  pEdrvInitParam_p    = pointer to struct including the init-parameters
 371 //
 372 // Returns:     Errorcode           = kEplSuccessful
 373 //                                  = kEplNoResource
 374 //
 375 // State:
 376 //
 377 //---------------------------------------------------------------------------
 378 tEplKernel EdrvInit(tEdrvInitParam * pEdrvInitParam_p)
 379 {
 380         tEplKernel Ret;
 381         int iResult;
 382
 383         Ret = kEplSuccessful;
 384
 385         // clear instance structure
 386         EPL_MEMSET(&EdrvInstance_l, 0, sizeof(EdrvInstance_l));
 387
 388         // save the init data
 389         EdrvInstance_l.m_InitParam = *pEdrvInitParam_p;
 390
 391         // register PCI driver
 392         iResult = pci_register_driver(&EdrvDriver);
 393         if (iResult != 0) {
 394                 printk("%s pci_register_driver failed with %d\n", __func__,
 395                        iResult);
 396                 Ret = kEplNoResource;
 397                 goto Exit;
 398         }
 399
 400         if (EdrvInstance_l.m_pPciDev == NULL) {
 401                 printk("%s m_pPciDev=NULL\n", __func__);
 402                 Ret = kEplNoResource;
 403                 goto Exit;
 404         }
 405         // read MAC address from controller
 406         printk("%s local MAC = ", __func__);
 407         for (iResult = 0; iResult < 6; iResult++) {
 408                 pEdrvInitParam_p->m_abMyMacAddr[iResult] =
 409                     EDRV_REGB_READ((EDRV_REGDW_IDR0 + iResult));
 410                 printk("%02X ",
 411                        (unsigned int)pEdrvInitParam_p->m_abMyMacAddr[iResult]);
 412         }
 413         printk("\n");
 414
 415       Exit:
 416         return Ret;
 417
 418 }
 419
 420 //---------------------------------------------------------------------------
 421 //
 422 // Function:    EdrvShutdown
 423 //
 424 // Description: Shutdown the Ethernet controller
 425 //
 426 // Parameters:  void
 427 //
 428 // Returns:     Errorcode   = kEplSuccessful
 429 //
 430 // State:
 431 //
 432 //---------------------------------------------------------------------------
 433 tEplKernel EdrvShutdown(void)
 434 {
 435
 436         // unregister PCI driver
 437         printk("%s calling pci_unregister_driver()\n", __func__);
 438         pci_unregister_driver(&EdrvDriver);
 439
 440         return kEplSuccessful;
 441 }
 442
 443 //---------------------------------------------------------------------------
 444 //
 445 // Function:    EdrvDefineRxMacAddrEntry
 446 //
 447 // Description: Set a multicast entry into the Ethernet controller
 448 //
 449 // Parameters:  pbMacAddr_p     = pointer to multicast entry to set
 450 //
 451 // Returns:     Errorcode       = kEplSuccessful
 452 //
 453 // State:
 454 //
 455 //---------------------------------------------------------------------------
 456 tEplKernel EdrvDefineRxMacAddrEntry(BYTE * pbMacAddr_p)
 457 {
 458         tEplKernel Ret = kEplSuccessful;
 459         DWORD dwData;
 460         BYTE bHash;
 461
 462         bHash = EdrvCalcHash(pbMacAddr_p);
 463 /*
 464     dwData = ether_crc(6, pbMacAddr_p);
 465
 466     printk("EdrvDefineRxMacAddrEntry('%02X:%02X:%02X:%02X:%02X:%02X') hash = %u / %u  ether_crc = 0x%08lX\n",
 467         (WORD) pbMacAddr_p[0], (WORD) pbMacAddr_p[1], (WORD) pbMacAddr_p[2],
 468         (WORD) pbMacAddr_p[3], (WORD) pbMacAddr_p[4], (WORD) pbMacAddr_p[5],
 469         (WORD) bHash, (WORD) (dwData >> 26), dwData);
 470 */
 471         if (bHash > 31) {
 472                 dwData = EDRV_REGDW_READ(EDRV_REGDW_MAR4);
 473                 dwData |= 1 << (bHash - 32);
 474                 EDRV_REGDW_WRITE(EDRV_REGDW_MAR4, dwData);
 475         } else {
 476                 dwData = EDRV_REGDW_READ(EDRV_REGDW_MAR0);
 477                 dwData |= 1 << bHash;
 478                 EDRV_REGDW_WRITE(EDRV_REGDW_MAR0, dwData);
 479         }
 480
 481         return Ret;
 482 }
 483
 484 //---------------------------------------------------------------------------
 485 //
 486 // Function:    EdrvUndefineRxMacAddrEntry
 487 //
 488 // Description: Reset a multicast entry in the Ethernet controller
 489 //
 490 // Parameters:  pbMacAddr_p     = pointer to multicast entry to reset
 491 //
 492 // Returns:     Errorcode       = kEplSuccessful
 493 //
 494 // State:
 495 //
 496 //---------------------------------------------------------------------------
 497 tEplKernel EdrvUndefineRxMacAddrEntry(BYTE * pbMacAddr_p)
 498 {
 499         tEplKernel Ret = kEplSuccessful;
 500         DWORD dwData;
 501         BYTE bHash;
 502
 503         bHash = EdrvCalcHash(pbMacAddr_p);
 504
 505         if (bHash > 31) {
 506                 dwData = EDRV_REGDW_READ(EDRV_REGDW_MAR4);
 507                 dwData &= ~(1 << (bHash - 32));
 508                 EDRV_REGDW_WRITE(EDRV_REGDW_MAR4, dwData);
 509         } else {
 510                 dwData = EDRV_REGDW_READ(EDRV_REGDW_MAR0);
 511                 dwData &= ~(1 << bHash);
 512                 EDRV_REGDW_WRITE(EDRV_REGDW_MAR0, dwData);
 513         }
 514
 515         return Ret;
 516 }
 517
 518 //---------------------------------------------------------------------------
 519 //
 520 // Function:    EdrvAllocTxMsgBuffer
 521 //
 522 // Description: Register a Tx-Buffer
 523 //
 524 // Parameters:  pBuffer_p   = pointer to Buffer structure
 525 //
 526 // Returns:     Errorcode   = kEplSuccessful
 527 //                          = kEplEdrvNoFreeBufEntry
 528 //
 529 // State:
 530 //
 531 //---------------------------------------------------------------------------
 532 tEplKernel EdrvAllocTxMsgBuffer(tEdrvTxBuffer * pBuffer_p)
 533 {
 534         tEplKernel Ret = kEplSuccessful;
 535         DWORD i;
 536
 537         if (pBuffer_p->m_uiMaxBufferLen > EDRV_MAX_FRAME_SIZE) {
 538                 Ret = kEplEdrvNoFreeBufEntry;
 539                 goto Exit;
 540         }
 541         // search a free Tx buffer with appropriate size
 542         for (i = 0; i < EDRV_MAX_TX_BUFFERS; i++) {
 543                 if (EdrvInstance_l.m_afTxBufUsed[i] == FALSE) {
 544                         // free channel found
 545                         EdrvInstance_l.m_afTxBufUsed[i] = TRUE;
 546                         pBuffer_p->m_uiBufferNumber = i;
 547                         pBuffer_p->m_pbBuffer =
 548                             EdrvInstance_l.m_pbTxBuf +
 549                             (i * EDRV_MAX_FRAME_SIZE);
 550                         pBuffer_p->m_uiMaxBufferLen = EDRV_MAX_FRAME_SIZE;
 551                         break;
 552                 }
 553         }
 554         if (i >= EDRV_MAX_TX_BUFFERS) {
 555                 Ret = kEplEdrvNoFreeBufEntry;
 556                 goto Exit;
 557         }
 558
 559       Exit:
 560         return Ret;
 561
 562 }
 563
 564 //---------------------------------------------------------------------------
 565 //
 566 // Function:    EdrvReleaseTxMsgBuffer
 567 //
 568 // Description: Register a Tx-Buffer
 569 //
 570 // Parameters:  pBuffer_p   = pointer to Buffer structure
 571 //
 572 // Returns:     Errorcode   = kEplSuccessful
 573 //
 574 // State:
 575 //
 576 //---------------------------------------------------------------------------
 577 tEplKernel EdrvReleaseTxMsgBuffer(tEdrvTxBuffer * pBuffer_p)
 578 {
 579         unsigned int uiBufferNumber;
 580
 581         uiBufferNumber = pBuffer_p->m_uiBufferNumber;
 582
 583         if (uiBufferNumber < EDRV_MAX_TX_BUFFERS) {
 584                 EdrvInstance_l.m_afTxBufUsed[uiBufferNumber] = FALSE;
 585         }
 586
 587         return kEplSuccessful;
 588
 589 }
 590
 591 //---------------------------------------------------------------------------
 592 //
 593 // Function:    EdrvSendTxMsg
 594 //
 595 // Description: immediately starts the transmission of the buffer
 596 //
 597 // Parameters:  pBuffer_p   = buffer descriptor to transmit
 598 //
 599 // Returns:     Errorcode   = kEplSuccessful
 600 //
 601 // State:
 602 //
 603 //---------------------------------------------------------------------------
 604 tEplKernel EdrvSendTxMsg(tEdrvTxBuffer * pBuffer_p)
 605 {
 606         tEplKernel Ret = kEplSuccessful;
 607         unsigned int uiBufferNumber;
 608         DWORD dwTemp;
 609
 610         uiBufferNumber = pBuffer_p->m_uiBufferNumber;
 611
 612         if ((uiBufferNumber >= EDRV_MAX_TX_BUFFERS)
 613             || (EdrvInstance_l.m_afTxBufUsed[uiBufferNumber] == FALSE)) {
 614                 Ret = kEplEdrvBufNotExisting;
 615                 goto Exit;
 616         }
 617
 618         if (EdrvInstance_l.m_pLastTransmittedTxBuffer != NULL) {        // transmission is already active
 619                 Ret = kEplInvalidOperation;
 620                 dwTemp =
 621                     EDRV_REGDW_READ((EDRV_REGDW_TSD0 +
 622                                      (EdrvInstance_l.m_uiCurTxDesc *
 623                                       sizeof(DWORD))));
 624                 printk("%s InvOp TSD%u = 0x%08lX", __func__,
 625                        EdrvInstance_l.m_uiCurTxDesc, dwTemp);
 626                 printk("  Cmd = 0x%02X\n",
 627                        (WORD) EDRV_REGB_READ(EDRV_REGB_COMMAND));
 628                 goto Exit;
 629         }
 630         // save pointer to buffer structure for TxHandler
 631         EdrvInstance_l.m_pLastTransmittedTxBuffer = pBuffer_p;
 632
 633         EDRV_COUNT_SEND;
 634
 635         // pad with zeros if necessary, because controller does not do it
 636         if (pBuffer_p->m_uiTxMsgLen < MIN_ETH_SIZE) {
 637                 EPL_MEMSET(pBuffer_p->m_pbBuffer + pBuffer_p->m_uiTxMsgLen, 0,
 638                            MIN_ETH_SIZE - pBuffer_p->m_uiTxMsgLen);
 639                 pBuffer_p->m_uiTxMsgLen = MIN_ETH_SIZE;
 640         }
 641         // set DMA address of buffer
 642         EDRV_REGDW_WRITE((EDRV_REGDW_TSAD0 +
 643                           (EdrvInstance_l.m_uiCurTxDesc * sizeof(DWORD))),
 644                          (EdrvInstance_l.m_pTxBufDma +
 645                           (uiBufferNumber * EDRV_MAX_FRAME_SIZE)));
 646         dwTemp =
 647             EDRV_REGDW_READ((EDRV_REGDW_TSAD0 +
 648                              (EdrvInstance_l.m_uiCurTxDesc * sizeof(DWORD))));
 649 //    printk("%s TSAD%u = 0x%08lX", __func__, EdrvInstance_l.m_uiCurTxDesc, dwTemp);
 650
 651         // start transmission
 652         EDRV_REGDW_WRITE((EDRV_REGDW_TSD0 +
 653                           (EdrvInstance_l.m_uiCurTxDesc * sizeof(DWORD))),
 654                          (EDRV_REGDW_TSD_TXTH_DEF | pBuffer_p->m_uiTxMsgLen));
 655         dwTemp =
 656             EDRV_REGDW_READ((EDRV_REGDW_TSD0 +
 657                              (EdrvInstance_l.m_uiCurTxDesc * sizeof(DWORD))));
 658 //    printk(" TSD%u = 0x%08lX / 0x%08lX\n", EdrvInstance_l.m_uiCurTxDesc, dwTemp, (DWORD)(EDRV_REGDW_TSD_TXTH_DEF | pBuffer_p->m_uiTxMsgLen));
 659
 660       Exit:
 661         return Ret;
 662 }
 663
 664 #if 0
 665 //---------------------------------------------------------------------------
 666 //
 667 // Function:    EdrvTxMsgReady
 668 //
 669 // Description: starts copying the buffer to the ethernet controller's FIFO
 670 //
 671 // Parameters:  pbBuffer_p - bufferdescriptor to transmit
 672 //
 673 // Returns:     Errorcode - kEplSuccessful
 674 //
 675 // State:
 676 //
 677 //---------------------------------------------------------------------------
 678 tEplKernel EdrvTxMsgReady(tEdrvTxBuffer * pBuffer_p)
 679 {
 680         tEplKernel Ret = kEplSuccessful;
 681         unsigned int uiBufferNumber;
 682
 683       Exit:
 684         return Ret;
 685 }
 686
 687 //---------------------------------------------------------------------------
 688 //
 689 // Function:    EdrvTxMsgStart
 690 //
 691 // Description: starts transmission of the ethernet controller's FIFO
 692 //
 693 // Parameters:  pbBuffer_p - bufferdescriptor to transmit
 694 //
 695 // Returns:     Errorcode - kEplSuccessful
 696 //
 697 // State:
 698 //
 699 //---------------------------------------------------------------------------
 700 tEplKernel EdrvTxMsgStart(tEdrvTxBuffer * pBuffer_p)
 701 {
 702         tEplKernel Ret = kEplSuccessful;
 703
 704         return Ret;
 705 }
 706 #endif
 707
 708 //---------------------------------------------------------------------------
 709 //
 710 // Function:    EdrvReinitRx
 711 //
 712 // Description: reinitialize the Rx process, because of error
 713 //
 714 // Parameters:  void
 715 //
 716 // Returns:     void
 717 //
 718 // State:
 719 //
 720 //---------------------------------------------------------------------------
 721 static void EdrvReinitRx(void)
 722 {
 723         BYTE bCmd;
 724
 725         // simply switch off and on the receiver
 726         // this will reset the CAPR register
 727         bCmd = EDRV_REGB_READ(EDRV_REGB_COMMAND);
 728         EDRV_REGB_WRITE(EDRV_REGB_COMMAND, (bCmd & ~EDRV_REGB_COMMAND_RE));
 729         EDRV_REGB_WRITE(EDRV_REGB_COMMAND, bCmd);
 730
 731         // set receive configuration register
 732         EDRV_REGDW_WRITE(EDRV_REGDW_RCR, EDRV_REGDW_RCR_DEF);
 733 }
 734
 735 //---------------------------------------------------------------------------
 736 //
 737 // Function:     EdrvInterruptHandler
 738 //
 739 // Description:  interrupt handler
 740 //
 741 // Parameters:   void
 742 //
 743 // Returns:      void
 744 //
 745 // State:
 746 //
 747 //---------------------------------------------------------------------------
 748 #if 0
 749 void EdrvInterruptHandler(void)
 750 {
 751 }
 752 #endif
 753
 754 #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19)
 755 static int TgtEthIsr(int nIrqNum_p, void *ppDevInstData_p)
 756 #else
 757 static int TgtEthIsr(int nIrqNum_p, void *ppDevInstData_p,
 758                      struct pt_regs *ptRegs_p)
 759 #endif
 760 {
 761 //    EdrvInterruptHandler();
 762         tEdrvRxBuffer RxBuffer;
 763         tEdrvTxBuffer *pTxBuffer;
 764         WORD wStatus;
 765         DWORD dwTxStatus;
 766         DWORD dwRxStatus;
 767         WORD wCurRx;
 768         BYTE *pbRxBuf;
 769         unsigned int uiLength;
 770         int iHandled = IRQ_HANDLED;
 771
 772 //    printk("¤");
 773
 774         // read the interrupt status
 775         wStatus = EDRV_REGW_READ(EDRV_REGW_INT_STATUS);
 776
 777         // acknowledge the interrupts
 778         EDRV_REGW_WRITE(EDRV_REGW_INT_STATUS, wStatus);
 779
 780         if (wStatus == 0) {
 781                 iHandled = IRQ_NONE;
 782                 goto Exit;
 783         }
 784         // process tasks
 785         if ((wStatus & (EDRV_REGW_INT_TER | EDRV_REGW_INT_TOK)) != 0) { // transmit interrupt
 786
 787                 if (EdrvInstance_l.m_pbTxBuf == NULL) {
 788                         printk("%s Tx buffers currently not allocated\n",
 789                                __func__);
 790                         goto Exit;
 791                 }
 792                 // read transmit status
 793                 dwTxStatus =
 794                     EDRV_REGDW_READ((EDRV_REGDW_TSD0 +
 795                                      (EdrvInstance_l.m_uiCurTxDesc *
 796                                       sizeof(DWORD))));
 797                 if ((dwTxStatus & (EDRV_REGDW_TSD_TOK | EDRV_REGDW_TSD_TABT | EDRV_REGDW_TSD_TUN)) != 0) {      // transmit finished
 798                         EdrvInstance_l.m_uiCurTxDesc =
 799                             (EdrvInstance_l.m_uiCurTxDesc + 1) & 0x03;
 800                         pTxBuffer = EdrvInstance_l.m_pLastTransmittedTxBuffer;
 801                         EdrvInstance_l.m_pLastTransmittedTxBuffer = NULL;
 802
 803                         if ((dwTxStatus & EDRV_REGDW_TSD_TOK) != 0) {
 804                                 EDRV_COUNT_TX;
 805                         } else if ((dwTxStatus & EDRV_REGDW_TSD_TUN) != 0) {
 806                                 EDRV_COUNT_TX_FUN;
 807                         } else {        // assume EDRV_REGDW_TSD_TABT
 808                                 EDRV_COUNT_TX_COL_RL;
 809                         }
 810
 811 //            printk("T");
 812                         if (pTxBuffer != NULL) {
 813                                 // call Tx handler of Data link layer
 814                                 EdrvInstance_l.m_InitParam.
 815                                     m_pfnTxHandler(pTxBuffer);
 816                         }
 817                 } else {
 818                         EDRV_COUNT_TX_ERR;
 819                 }
 820         }
 821
 822         if ((wStatus & (EDRV_REGW_INT_RER | EDRV_REGW_INT_FOVW | EDRV_REGW_INT_RXOVW | EDRV_REGW_INT_PUN)) != 0) {      // receive error interrupt
 823
 824                 if ((wStatus & EDRV_REGW_INT_FOVW) != 0) {
 825                         EDRV_COUNT_RX_FOVW;
 826                 } else if ((wStatus & EDRV_REGW_INT_RXOVW) != 0) {
 827                         EDRV_COUNT_RX_OVW;
 828                 } else if ((wStatus & EDRV_REGW_INT_PUN) != 0) {        // Packet underrun
 829                         EDRV_TRACE_RX_PUN(wStatus);
 830                         EDRV_COUNT_RX_PUN;
 831                 } else {        /*if ((wStatus & EDRV_REGW_INT_RER) != 0) */
 832
 833                         EDRV_TRACE_RX_ERR(wStatus);
 834                         EDRV_COUNT_RX_ERR;
 835                 }
 836
 837                 // reinitialize Rx process
 838                 EdrvReinitRx();
 839         }
 840
 841         if ((wStatus & EDRV_REGW_INT_ROK) != 0) {       // receive interrupt
 842
 843                 if (EdrvInstance_l.m_pbRxBuf == NULL) {
 844                         printk("%s Rx buffers currently not allocated\n",
 845                                __func__);
 846                         goto Exit;
 847                 }
 848                 // read current offset in receive buffer
 849                 wCurRx =
 850                     (EDRV_REGW_READ(EDRV_REGW_CAPR) +
 851                      0x10) % EDRV_RX_BUFFER_LENGTH;
 852
 853                 while ((EDRV_REGB_READ(EDRV_REGB_COMMAND) & EDRV_REGB_COMMAND_BUFE) == 0) {     // frame available
 854
 855                         // calculate pointer to current frame in receive buffer
 856                         pbRxBuf = EdrvInstance_l.m_pbRxBuf + wCurRx;
 857
 858                         // read receive status DWORD
 859                         dwRxStatus = le32_to_cpu(*((DWORD *) pbRxBuf));
 860
 861                         // calculate length of received frame
 862                         uiLength = dwRxStatus >> 16;
 863
 864                         if (uiLength == 0xFFF0) {       // frame is unfinished (maybe early Rx interrupt is active)
 865                                 break;
 866                         }
 867
 868                         if ((dwRxStatus & EDRV_RXSTAT_ROK) == 0) {      // error occured while receiving this frame
 869                                 // ignore it
 870                                 if ((dwRxStatus & EDRV_RXSTAT_FAE) != 0) {
 871                                         EDRV_COUNT_RX_FAE;
 872                                 } else if ((dwRxStatus & EDRV_RXSTAT_CRC) != 0) {
 873                                         EDRV_TRACE_RX_CRC(dwRxStatus);
 874                                         EDRV_COUNT_RX_CRC;
 875                                 } else {
 876                                         EDRV_TRACE_RX_ERR(dwRxStatus);
 877                                         EDRV_COUNT_RX_ERR;
 878                                 }
 879
 880                                 // reinitialize Rx process
 881                                 EdrvReinitRx();
 882
 883                                 break;
 884                         } else {        // frame is OK
 885                                 RxBuffer.m_BufferInFrame =
 886                                     kEdrvBufferLastInFrame;
 887                                 RxBuffer.m_uiRxMsgLen = uiLength - ETH_CRC_SIZE;
 888                                 RxBuffer.m_pbBuffer =
 889                                     pbRxBuf + sizeof(dwRxStatus);
 890
 891 //                printk("R");
 892                                 EDRV_COUNT_RX;
 893
 894                                 // call Rx handler of Data link layer
 895                                 EdrvInstance_l.m_InitParam.
 896                                     m_pfnRxHandler(&RxBuffer);
 897                         }
 898
 899                         // calulate new offset (DWORD aligned)
 900                         wCurRx =
 901                             (WORD) ((wCurRx + uiLength + sizeof(dwRxStatus) +
 902                                      3) & ~0x3);
 903                         EDRV_TRACE_CAPR(wCurRx - 0x10);
 904                         EDRV_REGW_WRITE(EDRV_REGW_CAPR, wCurRx - 0x10);
 905
 906                         // reread current offset in receive buffer
 907                         wCurRx =
 908                             (EDRV_REGW_READ(EDRV_REGW_CAPR) +
 909                              0x10) % EDRV_RX_BUFFER_LENGTH;
 910
 911                 }
 912         }
 913
 914         if ((wStatus & EDRV_REGW_INT_SERR) != 0) {      // PCI error
 915                 EDRV_COUNT_PCI_ERR;
 916         }
 917
 918         if ((wStatus & EDRV_REGW_INT_TIMEOUT) != 0) {   // Timeout
 919                 EDRV_COUNT_TIMEOUT;
 920         }
 921
 922       Exit:
 923         return iHandled;
 924 }
 925
 926 //---------------------------------------------------------------------------
 927 //
 928 // Function:    EdrvInitOne
 929 //
 930 // Description: initializes one PCI device
 931 //
 932 // Parameters:  pPciDev             = pointer to corresponding PCI device structure
 933 //              pId                 = PCI device ID
 934 //
 935 // Returns:     (int)               = error code
 936 //
 937 // State:
 938 //
 939 //---------------------------------------------------------------------------
 940
 941 static int EdrvInitOne(struct pci_dev *pPciDev, const struct pci_device_id *pId)
 942 {
 943         int iResult = 0;
 944         DWORD dwTemp;
 945
 946         if (EdrvInstance_l.m_pPciDev != NULL) { // Edrv is already connected to a PCI device
 947                 printk("%s device %s discarded\n", __func__,
 948                        pci_name(pPciDev));
 949                 iResult = -ENODEV;
 950                 goto Exit;
 951         }
 952
 953         if (pPciDev->revision >= 0x20) {
 954                 printk
 955                     ("%s device %s is an enhanced 8139C+ version, which is not supported\n",
 956                      __func__, pci_name(pPciDev));
 957                 iResult = -ENODEV;
 958                 goto Exit;
 959         }
 960
 961         EdrvInstance_l.m_pPciDev = pPciDev;
 962
 963         // enable device
 964         printk("%s enable device\n", __func__);
 965         iResult = pci_enable_device(pPciDev);
 966         if (iResult != 0) {
 967                 goto Exit;
 968         }
 969
 970         if ((pci_resource_flags(pPciDev, 1) & IORESOURCE_MEM) == 0) {
 971                 iResult = -ENODEV;
 972                 goto Exit;
 973         }
 974
 975         printk("%s request regions\n", __func__);
 976         iResult = pci_request_regions(pPciDev, DRV_NAME);
 977         if (iResult != 0) {
 978                 goto Exit;
 979         }
 980
 981         printk("%s ioremap\n", __func__);
 982         EdrvInstance_l.m_pIoAddr =
 983             ioremap(pci_resource_start(pPciDev, 1),
 984                     pci_resource_len(pPciDev, 1));
 985         if (EdrvInstance_l.m_pIoAddr == NULL) { // remap of controller's register space failed
 986                 iResult = -EIO;
 987                 goto Exit;
 988         }
 989         // enable PCI busmaster
 990         printk("%s enable busmaster\n", __func__);
 991         pci_set_master(pPciDev);
 992
 993         // reset controller
 994         printk("%s reset controller\n", __func__);
 995         EDRV_REGB_WRITE(EDRV_REGB_COMMAND, EDRV_REGB_COMMAND_RST);
 996
 997         // wait until reset has finished
 998         for (iResult = 500; iResult > 0; iResult--) {
 999                 if ((EDRV_REGB_READ(EDRV_REGB_COMMAND) & EDRV_REGB_COMMAND_RST)
1000                     == 0) {
1001                         break;
1002                 }
1003
1004                 schedule_timeout(10);
1005         }
1006
1007         // check hardware version, i.e. chip ID
1008         dwTemp = EDRV_REGDW_READ(EDRV_REGDW_TCR);
1009         if (((dwTemp & EDRV_REGDW_TCR_VER_MASK) != EDRV_REGDW_TCR_VER_C)
1010             && ((dwTemp & EDRV_REGDW_TCR_VER_MASK) != EDRV_REGDW_TCR_VER_D)) {  // unsupported chip
1011                 printk("%s Unsupported chip! TCR = 0x%08lX\n", __func__,
1012                        dwTemp);
1013                 iResult = -ENODEV;
1014                 goto Exit;
1015         }
1016         // disable interrupts
1017         printk("%s disable interrupts\n", __func__);
1018         EDRV_REGW_WRITE(EDRV_REGW_INT_MASK, 0);
1019         // acknowledge all pending interrupts
1020         EDRV_REGW_WRITE(EDRV_REGW_INT_STATUS,
1021                         EDRV_REGW_READ(EDRV_REGW_INT_STATUS));
1022
1023         // install interrupt handler
1024         printk("%s install interrupt handler\n", __func__);
1025         iResult =
1026             request_irq(pPciDev->irq, TgtEthIsr, IRQF_SHARED,
1027                         DRV_NAME /*pPciDev->dev.name */ , pPciDev);
1028         if (iResult != 0) {
1029                 goto Exit;
1030         }
1031
1032 /*
1033     // unlock configuration registers
1034     printk("%s unlock configuration registers\n", __func__);
1035     EDRV_REGB_WRITE(EDRV_REGB_CMD9346, EDRV_REGB_CMD9346_UNLOCK);
1036
1037     // check if user specified a MAC address
1038     printk("%s check specified MAC address\n", __func__);
1039     for (iResult = 0; iResult < 6; iResult++)
1040     {
1041         if (EdrvInstance_l.m_InitParam.m_abMyMacAddr[iResult] != 0)
1042         {
1043             printk("%s set local MAC address\n", __func__);
1044             // write this MAC address to controller
1045             EDRV_REGDW_WRITE(EDRV_REGDW_IDR0,
1046                 le32_to_cpu(*((DWORD*)&EdrvInstance_l.m_InitParam.m_abMyMacAddr[0])));
1047             dwTemp = EDRV_REGDW_READ(EDRV_REGDW_IDR0);
1048
1049             EDRV_REGDW_WRITE(EDRV_REGDW_IDR4,
1050                 le32_to_cpu(*((DWORD*)&EdrvInstance_l.m_InitParam.m_abMyMacAddr[4])));
1051             dwTemp = EDRV_REGDW_READ(EDRV_REGDW_IDR4);
1052             break;
1053         }
1054     }
1055     iResult = 0;
1056
1057     // lock configuration registers
1058     EDRV_REGB_WRITE(EDRV_REGB_CMD9346, EDRV_REGB_CMD9346_LOCK);
1059 */
1060
1061         // allocate buffers
1062         printk("%s allocate buffers\n", __func__);
1063         EdrvInstance_l.m_pbTxBuf =
1064             pci_alloc_consistent(pPciDev, EDRV_TX_BUFFER_SIZE,
1065                                  &EdrvInstance_l.m_pTxBufDma);
1066         if (EdrvInstance_l.m_pbTxBuf == NULL) {
1067                 iResult = -ENOMEM;
1068                 goto Exit;
1069         }
1070
1071         EdrvInstance_l.m_pbRxBuf =
1072             pci_alloc_consistent(pPciDev, EDRV_RX_BUFFER_SIZE,
1073                                  &EdrvInstance_l.m_pRxBufDma);
1074         if (EdrvInstance_l.m_pbRxBuf == NULL) {
1075                 iResult = -ENOMEM;
1076                 goto Exit;
1077         }
1078         // reset pointers for Tx buffers
1079         printk("%s reset pointers fo Tx buffers\n", __func__);
1080         EDRV_REGDW_WRITE(EDRV_REGDW_TSAD0, 0);
1081         dwTemp = EDRV_REGDW_READ(EDRV_REGDW_TSAD0);
1082         EDRV_REGDW_WRITE(EDRV_REGDW_TSAD1, 0);
1083         dwTemp = EDRV_REGDW_READ(EDRV_REGDW_TSAD1);
1084         EDRV_REGDW_WRITE(EDRV_REGDW_TSAD2, 0);
1085         dwTemp = EDRV_REGDW_READ(EDRV_REGDW_TSAD2);
1086         EDRV_REGDW_WRITE(EDRV_REGDW_TSAD3, 0);
1087         dwTemp = EDRV_REGDW_READ(EDRV_REGDW_TSAD3);
1088
1089         printk("    Command = 0x%02X\n",
1090                (WORD) EDRV_REGB_READ(EDRV_REGB_COMMAND));
1091
1092         // set pointer for receive buffer in controller
1093         printk("%s set pointer to Rx buffer\n", __func__);
1094         EDRV_REGDW_WRITE(EDRV_REGDW_RBSTART, EdrvInstance_l.m_pRxBufDma);
1095
1096         // enable transmitter and receiver
1097         printk("%s enable Tx and Rx", __func__);
1098         EDRV_REGB_WRITE(EDRV_REGB_COMMAND,
1099                         (EDRV_REGB_COMMAND_RE | EDRV_REGB_COMMAND_TE));
1100         printk("  Command = 0x%02X\n",
1101                (WORD) EDRV_REGB_READ(EDRV_REGB_COMMAND));
1102
1103         // clear missed packet counter to enable Rx/Tx process
1104         EDRV_REGDW_WRITE(EDRV_REGDW_MPC, 0);
1105
1106         // set transmit configuration register
1107         printk("%s set Tx conf register", __func__);
1108         EDRV_REGDW_WRITE(EDRV_REGDW_TCR, EDRV_REGDW_TCR_DEF);
1109         printk(" = 0x%08X\n", EDRV_REGDW_READ(EDRV_REGDW_TCR));
1110
1111         // set receive configuration register
1112         printk("%s set Rx conf register", __func__);
1113         EDRV_REGDW_WRITE(EDRV_REGDW_RCR, EDRV_REGDW_RCR_DEF);
1114         printk(" = 0x%08X\n", EDRV_REGDW_READ(EDRV_REGDW_RCR));
1115
1116         // reset multicast MAC address filter
1117         EDRV_REGDW_WRITE(EDRV_REGDW_MAR0, 0);
1118         dwTemp = EDRV_REGDW_READ(EDRV_REGDW_MAR0);
1119         EDRV_REGDW_WRITE(EDRV_REGDW_MAR4, 0);
1120         dwTemp = EDRV_REGDW_READ(EDRV_REGDW_MAR4);
1121
1122 /*
1123     // enable transmitter and receiver
1124     printk("%s enable Tx and Rx", __func__);
1125     EDRV_REGB_WRITE(EDRV_REGB_COMMAND, (EDRV_REGB_COMMAND_RE | EDRV_REGB_COMMAND_TE));
1126     printk("  Command = 0x%02X\n", (WORD) EDRV_REGB_READ(EDRV_REGB_COMMAND));
1127 */
1128         // disable early interrupts
1129         EDRV_REGW_WRITE(EDRV_REGW_MULINT, 0);
1130
1131         // enable interrupts
1132         printk("%s enable interrupts\n", __func__);
1133         EDRV_REGW_WRITE(EDRV_REGW_INT_MASK, EDRV_REGW_INT_MASK_DEF);
1134
1135       Exit:
1136         printk("%s finished with %d\n", __func__, iResult);
1137         return iResult;
1138 }
1139
1140 //---------------------------------------------------------------------------
1141 //
1142 // Function:    EdrvRemoveOne
1143 //
1144 // Description: shuts down one PCI device
1145 //
1146 // Parameters:  pPciDev             = pointer to corresponding PCI device structure
1147 //
1148 // Returns:     (void)
1149 //
1150 // State:
1151 //
1152 //---------------------------------------------------------------------------
1153
1154 static void EdrvRemoveOne(struct pci_dev *pPciDev)
1155 {
1156
1157         if (EdrvInstance_l.m_pPciDev != pPciDev) {      // trying to remove unknown device
1158                 BUG_ON(EdrvInstance_l.m_pPciDev != pPciDev);
1159                 goto Exit;
1160         }
1161         // disable transmitter and receiver
1162         EDRV_REGB_WRITE(EDRV_REGB_COMMAND, 0);
1163
1164         // disable interrupts
1165         EDRV_REGW_WRITE(EDRV_REGW_INT_MASK, 0);
1166
1167         // remove interrupt handler
1168         free_irq(pPciDev->irq, pPciDev);
1169
1170         // free buffers
1171         if (EdrvInstance_l.m_pbTxBuf != NULL) {
1172                 pci_free_consistent(pPciDev, EDRV_TX_BUFFER_SIZE,
1173                                     EdrvInstance_l.m_pbTxBuf,
1174                                     EdrvInstance_l.m_pTxBufDma);
1175                 EdrvInstance_l.m_pbTxBuf = NULL;
1176         }
1177
1178         if (EdrvInstance_l.m_pbRxBuf != NULL) {
1179                 pci_free_consistent(pPciDev, EDRV_RX_BUFFER_SIZE,
1180                                     EdrvInstance_l.m_pbRxBuf,
1181                                     EdrvInstance_l.m_pRxBufDma);
1182                 EdrvInstance_l.m_pbRxBuf = NULL;
1183         }
1184         // unmap controller's register space
1185         if (EdrvInstance_l.m_pIoAddr != NULL) {
1186                 iounmap(EdrvInstance_l.m_pIoAddr);
1187         }
1188         // disable the PCI device
1189         pci_disable_device(pPciDev);
1190
1191         // release memory regions
1192         pci_release_regions(pPciDev);
1193
1194         EdrvInstance_l.m_pPciDev = NULL;
1195
1196       Exit:;
1197 }
1198
1199 //---------------------------------------------------------------------------
1200 //
1201 // Function:    EdrvCalcHash
1202 //
1203 // Description: function calculates the entry for the hash-table from MAC
1204 //              address
1205 //
1206 // Parameters:  pbMAC_p - pointer to MAC address
1207 //
1208 // Returns:     hash value
1209 //
1210 // State:
1211 //
1212 //---------------------------------------------------------------------------
1213 #define HASH_BITS              6        // used bits in hash
1214 #define CRC32_POLY    0x04C11DB6        //
1215 //#define CRC32_POLY    0xEDB88320  //
1216 // G(x) = x32 + x26 + x23 + x22 + x16 + x12 + x11 + x10 + x8 + x7 + x5 + x4 + x2 + x + 1
1217
1218 static BYTE EdrvCalcHash(BYTE * pbMAC_p)
1219 {
1220         DWORD dwByteCounter;
1221         DWORD dwBitCounter;
1222         DWORD dwData;
1223         DWORD dwCrc;
1224         DWORD dwCarry;
1225         BYTE *pbData;
1226         BYTE bHash;
1227
1228         pbData = pbMAC_p;
1229
1230         // calculate crc32 value of mac address
1231         dwCrc = 0xFFFFFFFF;
1232
1233         for (dwByteCounter = 0; dwByteCounter < 6; dwByteCounter++) {
1234                 dwData = *pbData;
1235                 pbData++;
1236                 for (dwBitCounter = 0; dwBitCounter < 8;
1237                      dwBitCounter++, dwData >>= 1) {
1238                         dwCarry = (((dwCrc >> 31) ^ dwData) & 1);
1239                         dwCrc = dwCrc << 1;
1240                         if (dwCarry != 0) {
1241                                 dwCrc = (dwCrc ^ CRC32_POLY) | dwCarry;
1242                         }
1243                 }
1244         }
1245
1246 //    printk("MyCRC = 0x%08lX\n", dwCrc);
1247         // only upper 6 bits (HASH_BITS) are used
1248         // which point to specific bit in the hash registers
1249         bHash = (BYTE) ((dwCrc >> (32 - HASH_BITS)) & 0x3f);
1250
1251         return bHash;
1252 }