git.oblomov.eu Git - linux-2.6/blob - drivers/media/common/tuners/xc5000.c

   1 /*
   2  *  Driver for Xceive XC5000 "QAM/8VSB single chip tuner"
   3  *
   4  *  Copyright (c) 2007 Xceive Corporation
   5  *  Copyright (c) 2007 Steven Toth <stoth@hauppauge.com>
   6  *
   7  *  This program is free software; you can redistribute it and/or modify
   8  *  it under the terms of the GNU General Public License as published by
   9  *  the Free Software Foundation; either version 2 of the License, or
  10  *  (at your option) any later version.
  11  *
  12  *  This program is distributed in the hope that it will be useful,
  13  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  *
  16  *  GNU General Public License for more details.
  17  *
  18  *  You should have received a copy of the GNU General Public License
  19  *  along with this program; if not, write to the Free Software
  20  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  21  */
  22
  23 #include <linux/module.h>
  24 #include <linux/moduleparam.h>
  25 #include <linux/videodev2.h>
  26 #include <linux/delay.h>
  27 #include <linux/dvb/frontend.h>
  28 #include <linux/i2c.h>
  29
  30 #include "dvb_frontend.h"
  31
  32 #include "xc5000.h"
  33 #include "xc5000_priv.h"
  34
  35 static int debug;
  36 module_param(debug, int, 0644);
  37 MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
  38
  39 #define dprintk(level,fmt, arg...) if (debug >= level) \
  40         printk(KERN_INFO "%s: " fmt, "xc5000", ## arg)
  41
  42 #define XC5000_DEFAULT_FIRMWARE "dvb-fe-xc5000-1.1.fw"
  43 #define XC5000_DEFAULT_FIRMWARE_SIZE 12332
  44
  45 /* Misc Defines */
  46 #define MAX_TV_STANDARD                 23
  47 #define XC_MAX_I2C_WRITE_LENGTH         64
  48
  49 /* Signal Types */
  50 #define XC_RF_MODE_AIR                  0
  51 #define XC_RF_MODE_CABLE                1
  52
  53 /* Result codes */
  54 #define XC_RESULT_SUCCESS               0
  55 #define XC_RESULT_RESET_FAILURE         1
  56 #define XC_RESULT_I2C_WRITE_FAILURE     2
  57 #define XC_RESULT_I2C_READ_FAILURE      3
  58 #define XC_RESULT_OUT_OF_RANGE          5
  59
  60 /* Product id */
  61 #define XC_PRODUCT_ID_FW_NOT_LOADED     0x2000
  62 #define XC_PRODUCT_ID_FW_LOADED         0x1388
  63
  64 /* Registers */
  65 #define XREG_INIT         0x00
  66 #define XREG_VIDEO_MODE   0x01
  67 #define XREG_AUDIO_MODE   0x02
  68 #define XREG_RF_FREQ      0x03
  69 #define XREG_D_CODE       0x04
  70 #define XREG_IF_OUT       0x05
  71 #define XREG_SEEK_MODE    0x07
  72 #define XREG_POWER_DOWN   0x0A
  73 #define XREG_SIGNALSOURCE 0x0D /* 0=Air, 1=Cable */
  74 #define XREG_SMOOTHEDCVBS 0x0E
  75 #define XREG_XTALFREQ     0x0F
  76 #define XREG_FINERFFREQ   0x10
  77 #define XREG_DDIMODE      0x11
  78
  79 #define XREG_ADC_ENV      0x00
  80 #define XREG_QUALITY      0x01
  81 #define XREG_FRAME_LINES  0x02
  82 #define XREG_HSYNC_FREQ   0x03
  83 #define XREG_LOCK         0x04
  84 #define XREG_FREQ_ERROR   0x05
  85 #define XREG_SNR          0x06
  86 #define XREG_VERSION      0x07
  87 #define XREG_PRODUCT_ID   0x08
  88 #define XREG_BUSY         0x09
  89
  90 /*
  91    Basic firmware description. This will remain with
  92    the driver for documentation purposes.
  93
  94    This represents an I2C firmware file encoded as a
  95    string of unsigned char. Format is as follows:
  96
  97    char[0  ]=len0_MSB  -> len = len_MSB * 256 + len_LSB
  98    char[1  ]=len0_LSB  -> length of first write transaction
  99    char[2  ]=data0 -> first byte to be sent
 100    char[3  ]=data1
 101    char[4  ]=data2
 102    char[   ]=...
 103    char[M  ]=dataN  -> last byte to be sent
 104    char[M+1]=len1_MSB  -> len = len_MSB * 256 + len_LSB
 105    char[M+2]=len1_LSB  -> length of second write transaction
 106    char[M+3]=data0
 107    char[M+4]=data1
 108    ...
 109    etc.
 110
 111    The [len] value should be interpreted as follows:
 112
 113    len= len_MSB _ len_LSB
 114    len=1111_1111_1111_1111   : End of I2C_SEQUENCE
 115    len=0000_0000_0000_0000   : Reset command: Do hardware reset
 116    len=0NNN_NNNN_NNNN_NNNN   : Normal transaction: number of bytes = {1:32767)
 117    len=1WWW_WWWW_WWWW_WWWW   : Wait command: wait for {1:32767} ms
 118
 119    For the RESET and WAIT commands, the two following bytes will contain
 120    immediately the length of the following transaction.
 121
 122 */
 123 typedef struct {
 124         char *Name;
 125         u16 AudioMode;
 126         u16 VideoMode;
 127 } XC_TV_STANDARD;
 128
 129 /* Tuner standards */
 130 #define MN_NTSC_PAL_BTSC        0
 131 #define MN_NTSC_PAL_A2          1
 132 #define MN_NTSC_PAL_EIAJ        2
 133 #define MN_NTSC_PAL_Mono        3
 134 #define BG_PAL_A2               4
 135 #define BG_PAL_NICAM            5
 136 #define BG_PAL_MONO             6
 137 #define I_PAL_NICAM             7
 138 #define I_PAL_NICAM_MONO        8
 139 #define DK_PAL_A2               9
 140 #define DK_PAL_NICAM            10
 141 #define DK_PAL_MONO             11
 142 #define DK_SECAM_A2DK1          12
 143 #define DK_SECAM_A2LDK3         13
 144 #define DK_SECAM_A2MONO         14
 145 #define L_SECAM_NICAM           15
 146 #define LC_SECAM_NICAM          16
 147 #define DTV6                    17
 148 #define DTV8                    18
 149 #define DTV7_8                  19
 150 #define DTV7                    20
 151 #define FM_Radio_INPUT2         21
 152 #define FM_Radio_INPUT1         22
 153
 154 static XC_TV_STANDARD XC5000_Standard[MAX_TV_STANDARD] = {
 155         {"M/N-NTSC/PAL-BTSC", 0x0400, 0x8020},
 156         {"M/N-NTSC/PAL-A2",   0x0600, 0x8020},
 157         {"M/N-NTSC/PAL-EIAJ", 0x0440, 0x8020},
 158         {"M/N-NTSC/PAL-Mono", 0x0478, 0x8020},
 159         {"B/G-PAL-A2",        0x0A00, 0x8049},
 160         {"B/G-PAL-NICAM",     0x0C04, 0x8049},
 161         {"B/G-PAL-MONO",      0x0878, 0x8059},
 162         {"I-PAL-NICAM",       0x1080, 0x8009},
 163         {"I-PAL-NICAM-MONO",  0x0E78, 0x8009},
 164         {"D/K-PAL-A2",        0x1600, 0x8009},
 165         {"D/K-PAL-NICAM",     0x0E80, 0x8009},
 166         {"D/K-PAL-MONO",      0x1478, 0x8009},
 167         {"D/K-SECAM-A2 DK1",  0x1200, 0x8009},
 168         {"D/K-SECAM-A2 L/DK3",0x0E00, 0x8009},
 169         {"D/K-SECAM-A2 MONO", 0x1478, 0x8009},
 170         {"L-SECAM-NICAM",     0x8E82, 0x0009},
 171         {"L'-SECAM-NICAM",    0x8E82, 0x4009},
 172         {"DTV6",              0x00C0, 0x8002},
 173         {"DTV8",              0x00C0, 0x800B},
 174         {"DTV7/8",            0x00C0, 0x801B},
 175         {"DTV7",              0x00C0, 0x8007},
 176         {"FM Radio-INPUT2",   0x9802, 0x9002},
 177         {"FM Radio-INPUT1",   0x0208, 0x9002}
 178 };
 179
 180 static int  xc5000_is_firmware_loaded(struct dvb_frontend *fe);
 181 static int  xc5000_writeregs(struct xc5000_priv *priv, u8 *buf, u8 len);
 182 static int  xc5000_readregs(struct xc5000_priv *priv, u8 *buf, u8 len);
 183 static void xc5000_TunerReset(struct dvb_frontend *fe);
 184
 185 static int xc_send_i2c_data(struct xc5000_priv *priv, u8 *buf, int len)
 186 {
 187         return xc5000_writeregs(priv, buf, len)
 188                 ? XC_RESULT_I2C_WRITE_FAILURE : XC_RESULT_SUCCESS;
 189 }
 190
 191 static int xc_read_i2c_data(struct xc5000_priv *priv, u8 *buf, int len)
 192 {
 193         return xc5000_readregs(priv, buf, len)
 194                 ? XC_RESULT_I2C_READ_FAILURE : XC_RESULT_SUCCESS;
 195 }
 196
 197 static int xc_reset(struct dvb_frontend *fe)
 198 {
 199         xc5000_TunerReset(fe);
 200         return XC_RESULT_SUCCESS;
 201 }
 202
 203 static void xc_wait(int wait_ms)
 204 {
 205         msleep(wait_ms);
 206 }
 207
 208 static void xc5000_TunerReset(struct dvb_frontend *fe)
 209 {
 210         struct xc5000_priv *priv = fe->tuner_priv;
 211         int ret;
 212
 213         dprintk(1, "%s()\n", __func__);
 214
 215         if (priv->cfg->tuner_callback) {
 216                 ret = priv->cfg->tuner_callback(priv->devptr,
 217                                                 XC5000_TUNER_RESET, 0);
 218                 if (ret)
 219                         printk(KERN_ERR "xc5000: reset failed\n");
 220         } else
 221                 printk(KERN_ERR "xc5000: no tuner reset callback function, fatal\n");
 222 }
 223
 224 static int xc_write_reg(struct xc5000_priv *priv, u16 regAddr, u16 i2cData)
 225 {
 226         u8 buf[4];
 227         int WatchDogTimer = 5;
 228         int result;
 229
 230         buf[0] = (regAddr >> 8) & 0xFF;
 231         buf[1] = regAddr & 0xFF;
 232         buf[2] = (i2cData >> 8) & 0xFF;
 233         buf[3] = i2cData & 0xFF;
 234         result = xc_send_i2c_data(priv, buf, 4);
 235         if (result == XC_RESULT_SUCCESS) {
 236                 /* wait for busy flag to clear */
 237                 while ((WatchDogTimer > 0) && (result == XC_RESULT_SUCCESS)) {
 238                         buf[0] = 0;
 239                         buf[1] = XREG_BUSY;
 240
 241                         result = xc_send_i2c_data(priv, buf, 2);
 242                         if (result == XC_RESULT_SUCCESS) {
 243                                 result = xc_read_i2c_data(priv, buf, 2);
 244                                 if (result == XC_RESULT_SUCCESS) {
 245                                         if ((buf[0] == 0) && (buf[1] == 0)) {
 246                                                 /* busy flag cleared */
 247                                         break;
 248                                         } else {
 249                                                 xc_wait(100); /* wait 5 ms */
 250                                                 WatchDogTimer--;
 251                                         }
 252                                 }
 253                         }
 254                 }
 255         }
 256         if (WatchDogTimer < 0)
 257                 result = XC_RESULT_I2C_WRITE_FAILURE;
 258
 259         return result;
 260 }
 261
 262 static int xc_read_reg(struct xc5000_priv *priv, u16 regAddr, u16 *i2cData)
 263 {
 264         u8 buf[2];
 265         int result;
 266
 267         buf[0] = (regAddr >> 8) & 0xFF;
 268         buf[1] = regAddr & 0xFF;
 269         result = xc_send_i2c_data(priv, buf, 2);
 270         if (result != XC_RESULT_SUCCESS)
 271                 return result;
 272
 273         result = xc_read_i2c_data(priv, buf, 2);
 274         if (result != XC_RESULT_SUCCESS)
 275                 return result;
 276
 277         *i2cData = buf[0] * 256 + buf[1];
 278         return result;
 279 }
 280
 281 static int xc_load_i2c_sequence(struct dvb_frontend *fe, const u8 *i2c_sequence)
 282 {
 283         struct xc5000_priv *priv = fe->tuner_priv;
 284
 285         int i, nbytes_to_send, result;
 286         unsigned int len, pos, index;
 287         u8 buf[XC_MAX_I2C_WRITE_LENGTH];
 288
 289         index=0;
 290         while ((i2c_sequence[index]!=0xFF) || (i2c_sequence[index+1]!=0xFF)) {
 291                 len = i2c_sequence[index]* 256 + i2c_sequence[index+1];
 292                 if (len == 0x0000) {
 293                         /* RESET command */
 294                         result = xc_reset(fe);
 295                         index += 2;
 296                         if (result != XC_RESULT_SUCCESS)
 297                                 return result;
 298                 } else if (len & 0x8000) {
 299                         /* WAIT command */
 300                         xc_wait(len & 0x7FFF);
 301                         index += 2;
 302                 } else {
 303                         /* Send i2c data whilst ensuring individual transactions
 304                          * do not exceed XC_MAX_I2C_WRITE_LENGTH bytes.
 305                          */
 306                         index += 2;
 307                         buf[0] = i2c_sequence[index];
 308                         buf[1] = i2c_sequence[index + 1];
 309                         pos = 2;
 310                         while (pos < len) {
 311                                 if ((len - pos) > XC_MAX_I2C_WRITE_LENGTH - 2) {
 312                                         nbytes_to_send = XC_MAX_I2C_WRITE_LENGTH;
 313                                 } else {
 314                                         nbytes_to_send = (len - pos + 2);
 315                                 }
 316                                 for (i=2; i<nbytes_to_send; i++) {
 317                                         buf[i] = i2c_sequence[index + pos + i - 2];
 318                                 }
 319                                 result = xc_send_i2c_data(priv, buf, nbytes_to_send);
 320
 321                                 if (result != XC_RESULT_SUCCESS)
 322                                         return result;
 323
 324                                 pos += nbytes_to_send - 2;
 325                         }
 326                         index += len;
 327                 }
 328         }
 329         return XC_RESULT_SUCCESS;
 330 }
 331
 332 static int xc_initialize(struct xc5000_priv *priv)
 333 {
 334         dprintk(1, "%s()\n", __func__);
 335         return xc_write_reg(priv, XREG_INIT, 0);
 336 }
 337
 338 static int xc_SetTVStandard(struct xc5000_priv *priv,
 339         u16 VideoMode, u16 AudioMode)
 340 {
 341         int ret;
 342         dprintk(1, "%s(0x%04x,0x%04x)\n", __func__, VideoMode, AudioMode);
 343         dprintk(1, "%s() Standard = %s\n",
 344                 __func__,
 345                 XC5000_Standard[priv->video_standard].Name);
 346
 347         ret = xc_write_reg(priv, XREG_VIDEO_MODE, VideoMode);
 348         if (ret == XC_RESULT_SUCCESS)
 349                 ret = xc_write_reg(priv, XREG_AUDIO_MODE, AudioMode);
 350
 351         return ret;
 352 }
 353
 354 static int xc_shutdown(struct xc5000_priv *priv)
 355 {
 356         return XC_RESULT_SUCCESS;
 357         /* Fixme: cannot bring tuner back alive once shutdown
 358          *        without reloading the driver modules.
 359          *    return xc_write_reg(priv, XREG_POWER_DOWN, 0);
 360          */
 361 }
 362
 363 static int xc_SetSignalSource(struct xc5000_priv *priv, u16 rf_mode)
 364 {
 365         dprintk(1, "%s(%d) Source = %s\n", __func__, rf_mode,
 366                 rf_mode == XC_RF_MODE_AIR ? "ANTENNA" : "CABLE");
 367
 368         if ((rf_mode != XC_RF_MODE_AIR) && (rf_mode != XC_RF_MODE_CABLE))
 369         {
 370                 rf_mode = XC_RF_MODE_CABLE;
 371                 printk(KERN_ERR
 372                         "%s(), Invalid mode, defaulting to CABLE",
 373                         __func__);
 374         }
 375         return xc_write_reg(priv, XREG_SIGNALSOURCE, rf_mode);
 376 }
 377
 378 static const struct dvb_tuner_ops xc5000_tuner_ops;
 379
 380 static int xc_set_RF_frequency(struct xc5000_priv *priv, u32 freq_hz)
 381 {
 382         u16 freq_code;
 383
 384         dprintk(1, "%s(%u)\n", __func__, freq_hz);
 385
 386         if ((freq_hz > xc5000_tuner_ops.info.frequency_max) ||
 387                 (freq_hz < xc5000_tuner_ops.info.frequency_min))
 388                 return XC_RESULT_OUT_OF_RANGE;
 389
 390         freq_code = (u16)(freq_hz / 15625);
 391
 392         return xc_write_reg(priv, XREG_RF_FREQ, freq_code);
 393 }
 394
 395
 396 static int xc_set_IF_frequency(struct xc5000_priv *priv, u32 freq_khz)
 397 {
 398         u32 freq_code = (freq_khz * 1024)/1000;
 399         dprintk(1, "%s(freq_khz = %d) freq_code = 0x%x\n",
 400                 __func__, freq_khz, freq_code);
 401
 402         return xc_write_reg(priv, XREG_IF_OUT, freq_code);
 403 }
 404
 405
 406 static int xc_get_ADC_Envelope(struct xc5000_priv *priv, u16 *adc_envelope)
 407 {
 408         return xc_read_reg(priv, XREG_ADC_ENV, adc_envelope);
 409 }
 410
 411 static int xc_get_frequency_error(struct xc5000_priv *priv, u32 *freq_error_hz)
 412 {
 413         int result;
 414         u16 regData;
 415         u32 tmp;
 416
 417         result = xc_read_reg(priv, XREG_FREQ_ERROR, &regData);
 418         if (result)
 419                 return result;
 420
 421         tmp = (u32)regData;
 422         (*freq_error_hz) = (tmp * 15625) / 1000;
 423         return result;
 424 }
 425
 426 static int xc_get_lock_status(struct xc5000_priv *priv, u16 *lock_status)
 427 {
 428         return xc_read_reg(priv, XREG_LOCK, lock_status);
 429 }
 430
 431 static int xc_get_version(struct xc5000_priv *priv,
 432         u8 *hw_majorversion, u8 *hw_minorversion,
 433         u8 *fw_majorversion, u8 *fw_minorversion)
 434 {
 435         u16 data;
 436         int result;
 437
 438         result = xc_read_reg(priv, XREG_VERSION, &data);
 439         if (result)
 440                 return result;
 441
 442         (*hw_majorversion) = (data >> 12) & 0x0F;
 443         (*hw_minorversion) = (data >>  8) & 0x0F;
 444         (*fw_majorversion) = (data >>  4) & 0x0F;
 445         (*fw_minorversion) = data & 0x0F;
 446
 447         return 0;
 448 }
 449
 450 static int xc_get_hsync_freq(struct xc5000_priv *priv, u32 *hsync_freq_hz)
 451 {
 452         u16 regData;
 453         int result;
 454
 455         result = xc_read_reg(priv, XREG_HSYNC_FREQ, &regData);
 456         if (result)
 457                 return result;
 458
 459         (*hsync_freq_hz) = ((regData & 0x0fff) * 763)/100;
 460         return result;
 461 }
 462
 463 static int xc_get_frame_lines(struct xc5000_priv *priv, u16 *frame_lines)
 464 {
 465         return xc_read_reg(priv, XREG_FRAME_LINES, frame_lines);
 466 }
 467
 468 static int xc_get_quality(struct xc5000_priv *priv, u16 *quality)
 469 {
 470         return xc_read_reg(priv, XREG_QUALITY, quality);
 471 }
 472
 473 static u16 WaitForLock(struct xc5000_priv *priv)
 474 {
 475         u16 lockState = 0;
 476         int watchDogCount = 40;
 477
 478         while ((lockState == 0) && (watchDogCount > 0)) {
 479                 xc_get_lock_status(priv, &lockState);
 480                 if (lockState != 1) {
 481                         xc_wait(5);
 482                         watchDogCount--;
 483                 }
 484         }
 485         return lockState;
 486 }
 487
 488 static int xc_tune_channel(struct xc5000_priv *priv, u32 freq_hz)
 489 {
 490         int found = 0;
 491
 492         dprintk(1, "%s(%u)\n", __func__, freq_hz);
 493
 494         if (xc_set_RF_frequency(priv, freq_hz) != XC_RESULT_SUCCESS)
 495                 return 0;
 496
 497         if (WaitForLock(priv) == 1)
 498                 found = 1;
 499
 500         return found;
 501 }
 502
 503 static int xc5000_readreg(struct xc5000_priv *priv, u16 reg, u16 *val)
 504 {
 505         u8 buf[2] = { reg >> 8, reg & 0xff };
 506         u8 bval[2] = { 0, 0 };
 507         struct i2c_msg msg[2] = {
 508                 { .addr = priv->cfg->i2c_address,
 509                         .flags = 0, .buf = &buf[0], .len = 2 },
 510                 { .addr = priv->cfg->i2c_address,
 511                         .flags = I2C_M_RD, .buf = &bval[0], .len = 2 },
 512         };
 513
 514         if (i2c_transfer(priv->i2c, msg, 2) != 2) {
 515                 printk(KERN_WARNING "xc5000: I2C read failed\n");
 516                 return -EREMOTEIO;
 517         }
 518
 519         *val = (bval[0] << 8) | bval[1];
 520         return 0;
 521 }
 522
 523 static int xc5000_writeregs(struct xc5000_priv *priv, u8 *buf, u8 len)
 524 {
 525         struct i2c_msg msg = { .addr = priv->cfg->i2c_address,
 526                 .flags = 0, .buf = buf, .len = len };
 527
 528         if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
 529                 printk(KERN_ERR "xc5000: I2C write failed (len=%i)\n",
 530                         (int)len);
 531                 return -EREMOTEIO;
 532         }
 533         return 0;
 534 }
 535
 536 static int xc5000_readregs(struct xc5000_priv *priv, u8 *buf, u8 len)
 537 {
 538         struct i2c_msg msg = { .addr = priv->cfg->i2c_address,
 539                 .flags = I2C_M_RD, .buf = buf, .len = len };
 540
 541         if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
 542                 printk(KERN_ERR "xc5000 I2C read failed (len=%i)\n",(int)len);
 543                 return -EREMOTEIO;
 544         }
 545         return 0;
 546 }
 547
 548 static int xc5000_fwupload(struct dvb_frontend* fe)
 549 {
 550         struct xc5000_priv *priv = fe->tuner_priv;
 551         const struct firmware *fw;
 552         int ret;
 553
 554         /* request the firmware, this will block and timeout */
 555         printk(KERN_INFO "xc5000: waiting for firmware upload (%s)...\n",
 556                 XC5000_DEFAULT_FIRMWARE);
 557
 558         ret = request_firmware(&fw, XC5000_DEFAULT_FIRMWARE, &priv->i2c->dev);
 559         if (ret) {
 560                 printk(KERN_ERR "xc5000: Upload failed. (file not found?)\n");
 561                 ret = XC_RESULT_RESET_FAILURE;
 562                 goto out;
 563         } else {
 564                 printk(KERN_INFO "xc5000: firmware read %Zu bytes.\n",
 565                        fw->size);
 566                 ret = XC_RESULT_SUCCESS;
 567         }
 568
 569         if (fw->size != XC5000_DEFAULT_FIRMWARE_SIZE) {
 570                 printk(KERN_ERR "xc5000: firmware incorrect size\n");
 571                 ret = XC_RESULT_RESET_FAILURE;
 572         } else {
 573                 printk(KERN_INFO "xc5000: firmware upload\n");
 574                 ret = xc_load_i2c_sequence(fe,  fw->data );
 575         }
 576
 577 out:
 578         release_firmware(fw);
 579         return ret;
 580 }
 581
 582 static void xc_debug_dump(struct xc5000_priv *priv)
 583 {
 584         u16 adc_envelope;
 585         u32 freq_error_hz = 0;
 586         u16 lock_status;
 587         u32 hsync_freq_hz = 0;
 588         u16 frame_lines;
 589         u16 quality;
 590         u8 hw_majorversion = 0, hw_minorversion = 0;
 591         u8 fw_majorversion = 0, fw_minorversion = 0;
 592
 593         /* Wait for stats to stabilize.
 594          * Frame Lines needs two frame times after initial lock
 595          * before it is valid.
 596          */
 597         xc_wait(100);
 598
 599         xc_get_ADC_Envelope(priv,  &adc_envelope);
 600         dprintk(1, "*** ADC envelope (0-1023) = %d\n", adc_envelope);
 601
 602         xc_get_frequency_error(priv, &freq_error_hz);
 603         dprintk(1, "*** Frequency error = %d Hz\n", freq_error_hz);
 604
 605         xc_get_lock_status(priv,  &lock_status);
 606         dprintk(1, "*** Lock status (0-Wait, 1-Locked, 2-No-signal) = %d\n",
 607                 lock_status);
 608
 609         xc_get_version(priv,  &hw_majorversion, &hw_minorversion,
 610                 &fw_majorversion, &fw_minorversion);
 611         dprintk(1, "*** HW: V%02x.%02x, FW: V%02x.%02x\n",
 612                 hw_majorversion, hw_minorversion,
 613                 fw_majorversion, fw_minorversion);
 614
 615         xc_get_hsync_freq(priv,  &hsync_freq_hz);
 616         dprintk(1, "*** Horizontal sync frequency = %d Hz\n", hsync_freq_hz);
 617
 618         xc_get_frame_lines(priv,  &frame_lines);
 619         dprintk(1, "*** Frame lines = %d\n", frame_lines);
 620
 621         xc_get_quality(priv,  &quality);
 622         dprintk(1, "*** Quality (0:<8dB, 7:>56dB) = %d\n", quality);
 623 }
 624
 625 static int xc5000_set_params(struct dvb_frontend *fe,
 626         struct dvb_frontend_parameters *params)
 627 {
 628         struct xc5000_priv *priv = fe->tuner_priv;
 629         int ret;
 630
 631         dprintk(1, "%s() frequency=%d (Hz)\n", __func__, params->frequency);
 632
 633         switch(params->u.vsb.modulation) {
 634         case VSB_8:
 635         case VSB_16:
 636                 dprintk(1, "%s() VSB modulation\n", __func__);
 637                 priv->rf_mode = XC_RF_MODE_AIR;
 638                 priv->freq_hz = params->frequency - 1750000;
 639                 priv->bandwidth = BANDWIDTH_6_MHZ;
 640                 priv->video_standard = DTV6;
 641                 break;
 642         case QAM_64:
 643         case QAM_256:
 644         case QAM_AUTO:
 645                 dprintk(1, "%s() QAM modulation\n", __func__);
 646                 priv->rf_mode = XC_RF_MODE_CABLE;
 647                 priv->freq_hz = params->frequency - 1750000;
 648                 priv->bandwidth = BANDWIDTH_6_MHZ;
 649                 priv->video_standard = DTV6;
 650                 break;
 651         default:
 652                 return -EINVAL;
 653         }
 654
 655         dprintk(1, "%s() frequency=%d (compensated)\n",
 656                 __func__, priv->freq_hz);
 657
 658         ret = xc_SetSignalSource(priv, priv->rf_mode);
 659         if (ret != XC_RESULT_SUCCESS) {
 660                 printk(KERN_ERR
 661                         "xc5000: xc_SetSignalSource(%d) failed\n",
 662                         priv->rf_mode);
 663                 return -EREMOTEIO;
 664         }
 665
 666         ret = xc_SetTVStandard(priv,
 667                 XC5000_Standard[priv->video_standard].VideoMode,
 668                 XC5000_Standard[priv->video_standard].AudioMode);
 669         if (ret != XC_RESULT_SUCCESS) {
 670                 printk(KERN_ERR "xc5000: xc_SetTVStandard failed\n");
 671                 return -EREMOTEIO;
 672         }
 673
 674         ret = xc_set_IF_frequency(priv, priv->cfg->if_khz);
 675         if (ret != XC_RESULT_SUCCESS) {
 676                 printk(KERN_ERR "xc5000: xc_Set_IF_frequency(%d) failed\n",
 677                         priv->cfg->if_khz);
 678                 return -EIO;
 679         }
 680
 681         xc_tune_channel(priv, priv->freq_hz);
 682
 683         if (debug)
 684                 xc_debug_dump(priv);
 685
 686         return 0;
 687 }
 688
 689 static int xc5000_is_firmware_loaded(struct dvb_frontend *fe)
 690 {
 691         struct xc5000_priv *priv = fe->tuner_priv;
 692         int ret;
 693         u16 id;
 694
 695         ret = xc5000_readreg(priv, XREG_PRODUCT_ID, &id);
 696         if (ret == XC_RESULT_SUCCESS) {
 697                 if (id == XC_PRODUCT_ID_FW_NOT_LOADED)
 698                         ret = XC_RESULT_RESET_FAILURE;
 699                 else
 700                         ret = XC_RESULT_SUCCESS;
 701         }
 702
 703         dprintk(1, "%s() returns %s id = 0x%x\n", __func__,
 704                 ret == XC_RESULT_SUCCESS ? "True" : "False", id);
 705         return ret;
 706 }
 707
 708 static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe);
 709
 710 static int xc5000_set_analog_params(struct dvb_frontend *fe,
 711         struct analog_parameters *params)
 712 {
 713         struct xc5000_priv *priv = fe->tuner_priv;
 714         int ret;
 715
 716         if (xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS)
 717                 xc_load_fw_and_init_tuner(fe);
 718
 719         dprintk(1, "%s() frequency=%d (in units of 62.5khz)\n",
 720                 __func__, params->frequency);
 721
 722         priv->rf_mode = XC_RF_MODE_CABLE; /* Fix me: it could be air. */
 723
 724         /* params->frequency is in units of 62.5khz */
 725         priv->freq_hz = params->frequency * 62500;
 726
 727         /* FIX ME: Some video standards may have several possible audio
 728                    standards. We simply default to one of them here.
 729          */
 730         if(params->std & V4L2_STD_MN) {
 731                 /* default to BTSC audio standard */
 732                 priv->video_standard = MN_NTSC_PAL_BTSC;
 733                 goto tune_channel;
 734         }
 735
 736         if(params->std & V4L2_STD_PAL_BG) {
 737                 /* default to NICAM audio standard */
 738                 priv->video_standard = BG_PAL_NICAM;
 739                 goto tune_channel;
 740         }
 741
 742         if(params->std & V4L2_STD_PAL_I) {
 743                 /* default to NICAM audio standard */
 744                 priv->video_standard = I_PAL_NICAM;
 745                 goto tune_channel;
 746         }
 747
 748         if(params->std & V4L2_STD_PAL_DK) {
 749                 /* default to NICAM audio standard */
 750                 priv->video_standard = DK_PAL_NICAM;
 751                 goto tune_channel;
 752         }
 753
 754         if(params->std & V4L2_STD_SECAM_DK) {
 755                 /* default to A2 DK1 audio standard */
 756                 priv->video_standard = DK_SECAM_A2DK1;
 757                 goto tune_channel;
 758         }
 759
 760         if(params->std & V4L2_STD_SECAM_L) {
 761                 priv->video_standard = L_SECAM_NICAM;
 762                 goto tune_channel;
 763         }
 764
 765         if(params->std & V4L2_STD_SECAM_LC) {
 766                 priv->video_standard = LC_SECAM_NICAM;
 767                 goto tune_channel;
 768         }
 769
 770 tune_channel:
 771         ret = xc_SetSignalSource(priv, priv->rf_mode);
 772         if (ret != XC_RESULT_SUCCESS) {
 773         printk(KERN_ERR
 774                         "xc5000: xc_SetSignalSource(%d) failed\n",
 775                         priv->rf_mode);
 776                 return -EREMOTEIO;
 777         }
 778
 779         ret = xc_SetTVStandard(priv,
 780                 XC5000_Standard[priv->video_standard].VideoMode,
 781                 XC5000_Standard[priv->video_standard].AudioMode);
 782         if (ret != XC_RESULT_SUCCESS) {
 783                 printk(KERN_ERR "xc5000: xc_SetTVStandard failed\n");
 784                 return -EREMOTEIO;
 785         }
 786
 787         xc_tune_channel(priv, priv->freq_hz);
 788
 789         if (debug)
 790                 xc_debug_dump(priv);
 791
 792         return 0;
 793 }
 794
 795 static int xc5000_get_frequency(struct dvb_frontend *fe, u32 *freq)
 796 {
 797         struct xc5000_priv *priv = fe->tuner_priv;
 798         dprintk(1, "%s()\n", __func__);
 799         *freq = priv->freq_hz;
 800         return 0;
 801 }
 802
 803 static int xc5000_get_bandwidth(struct dvb_frontend *fe, u32 *bw)
 804 {
 805         struct xc5000_priv *priv = fe->tuner_priv;
 806         dprintk(1, "%s()\n", __func__);
 807
 808         *bw = priv->bandwidth;
 809         return 0;
 810 }
 811
 812 static int xc5000_get_status(struct dvb_frontend *fe, u32 *status)
 813 {
 814         struct xc5000_priv *priv = fe->tuner_priv;
 815         u16 lock_status = 0;
 816
 817         xc_get_lock_status(priv, &lock_status);
 818
 819         dprintk(1, "%s() lock_status = 0x%08x\n", __func__, lock_status);
 820
 821         *status = lock_status;
 822
 823         return 0;
 824 }
 825
 826 static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe)
 827 {
 828         struct xc5000_priv *priv = fe->tuner_priv;
 829         int ret = 0;
 830
 831         if (xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS) {
 832                 ret = xc5000_fwupload(fe);
 833                 if (ret != XC_RESULT_SUCCESS)
 834                         return ret;
 835         }
 836
 837         /* Start the tuner self-calibration process */
 838         ret |= xc_initialize(priv);
 839
 840         /* Wait for calibration to complete.
 841          * We could continue but XC5000 will clock stretch subsequent
 842          * I2C transactions until calibration is complete.  This way we
 843          * don't have to rely on clock stretching working.
 844          */
 845         xc_wait( 100 );
 846
 847         /* Default to "CABLE" mode */
 848         ret |= xc_write_reg(priv, XREG_SIGNALSOURCE, XC_RF_MODE_CABLE);
 849
 850         return ret;
 851 }
 852
 853 static int xc5000_sleep(struct dvb_frontend *fe)
 854 {
 855         struct xc5000_priv *priv = fe->tuner_priv;
 856         int ret;
 857
 858         dprintk(1, "%s()\n", __func__);
 859
 860         /* On Pinnacle PCTV HD 800i, the tuner cannot be reinitialized
 861          * once shutdown without reloading the driver. Maybe I am not
 862          * doing something right.
 863          *
 864          */
 865
 866         ret = xc_shutdown(priv);
 867         if(ret != XC_RESULT_SUCCESS) {
 868                 printk(KERN_ERR
 869                         "xc5000: %s() unable to shutdown tuner\n",
 870                         __func__);
 871                 return -EREMOTEIO;
 872         }
 873         else {
 874                 return XC_RESULT_SUCCESS;
 875         }
 876 }
 877
 878 static int xc5000_init(struct dvb_frontend *fe)
 879 {
 880         struct xc5000_priv *priv = fe->tuner_priv;
 881         dprintk(1, "%s()\n", __func__);
 882
 883         if (xc_load_fw_and_init_tuner(fe) != XC_RESULT_SUCCESS) {
 884                 printk(KERN_ERR "xc5000: Unable to initialise tuner\n");
 885                 return -EREMOTEIO;
 886         }
 887
 888         if (debug)
 889                 xc_debug_dump(priv);
 890
 891         return 0;
 892 }
 893
 894 static int xc5000_release(struct dvb_frontend *fe)
 895 {
 896         dprintk(1, "%s()\n", __func__);
 897         kfree(fe->tuner_priv);
 898         fe->tuner_priv = NULL;
 899         return 0;
 900 }
 901
 902 static const struct dvb_tuner_ops xc5000_tuner_ops = {
 903         .info = {
 904                 .name           = "Xceive XC5000",
 905                 .frequency_min  =    1000000,
 906                 .frequency_max  = 1023000000,
 907                 .frequency_step =      50000,
 908         },
 909
 910         .release           = xc5000_release,
 911         .init              = xc5000_init,
 912         .sleep             = xc5000_sleep,
 913
 914         .set_params        = xc5000_set_params,
 915         .set_analog_params = xc5000_set_analog_params,
 916         .get_frequency     = xc5000_get_frequency,
 917         .get_bandwidth     = xc5000_get_bandwidth,
 918         .get_status        = xc5000_get_status
 919 };
 920
 921 struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe,
 922                                    struct i2c_adapter *i2c,
 923                                    struct xc5000_config *cfg, void *devptr)
 924 {
 925         struct xc5000_priv *priv = NULL;
 926         u16 id = 0;
 927
 928         dprintk(1, "%s()\n", __func__);
 929
 930         priv = kzalloc(sizeof(struct xc5000_priv), GFP_KERNEL);
 931         if (priv == NULL)
 932                 return NULL;
 933
 934         priv->cfg = cfg;
 935         priv->bandwidth = BANDWIDTH_6_MHZ;
 936         priv->i2c = i2c;
 937         priv->devptr = devptr;
 938
 939         /* Check if firmware has been loaded. It is possible that another
 940            instance of the driver has loaded the firmware.
 941          */
 942         if (xc5000_readreg(priv, XREG_PRODUCT_ID, &id) != 0) {
 943                 kfree(priv);
 944                 return NULL;
 945         }
 946
 947         switch(id) {
 948         case XC_PRODUCT_ID_FW_LOADED:
 949                 printk(KERN_INFO
 950                         "xc5000: Successfully identified at address 0x%02x\n",
 951                         cfg->i2c_address);
 952                 printk(KERN_INFO
 953                         "xc5000: Firmware has been loaded previously\n");
 954                 break;
 955         case XC_PRODUCT_ID_FW_NOT_LOADED:
 956                 printk(KERN_INFO
 957                         "xc5000: Successfully identified at address 0x%02x\n",
 958                         cfg->i2c_address);
 959                 printk(KERN_INFO
 960                         "xc5000: Firmware has not been loaded previously\n");
 961                 break;
 962         default:
 963                 printk(KERN_ERR
 964                         "xc5000: Device not found at addr 0x%02x (0x%x)\n",
 965                         cfg->i2c_address, id);
 966                 kfree(priv);
 967                 return NULL;
 968         }
 969
 970         memcpy(&fe->ops.tuner_ops, &xc5000_tuner_ops,
 971                 sizeof(struct dvb_tuner_ops));
 972
 973         fe->tuner_priv = priv;
 974
 975         return fe;
 976 }
 977 EXPORT_SYMBOL(xc5000_attach);
 978
 979 MODULE_AUTHOR("Steven Toth");
 980 MODULE_DESCRIPTION("Xceive xc5000 silicon tuner driver");
 981 MODULE_LICENSE("GPL");