git.oblomov.eu Git - linux-2.6/blob - drivers/pcmcia/au1000_db1x00.c

   1 /*
   2  *
   3  * Alchemy Semi Db1x00 boards specific pcmcia routines.
   4  *
   5  * Copyright 2002 MontaVista Software Inc.
   6  * Author: MontaVista Software, Inc.
   7  *              ppopov@mvista.com or source@mvista.com
   8  *
   9  * Copyright 2004 Pete Popov, updated the driver to 2.6.
  10  * Followed the sa11xx API and largely copied many of the hardware
  11  * independent functions.
  12  *
  13  * ########################################################################
  14  *
  15  *  This program is free software; you can distribute it and/or modify it
  16  *  under the terms of the GNU General Public License (Version 2) as
  17  *  published by the Free Software Foundation.
  18  *
  19  *  This program is distributed in the hope it will be useful, but WITHOUT
  20  *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  21  *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  22  *  for more details.
  23  *
  24  *  You should have received a copy of the GNU General Public License along
  25  *  with this program; if not, write to the Free Software Foundation, Inc.,
  26  *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
  27  *
  28  * ########################################################################
  29  *
  30  *
  31  */
  32
  33 #include <linux/module.h>
  34 #include <linux/kernel.h>
  35 #include <linux/errno.h>
  36 #include <linux/interrupt.h>
  37 #include <linux/device.h>
  38 #include <linux/init.h>
  39
  40 #include <asm/irq.h>
  41 #include <asm/signal.h>
  42 #include <asm/mach-au1x00/au1000.h>
  43
  44 #if defined(CONFIG_MIPS_DB1200)
  45         #include <db1200.h>
  46 #elif defined(CONFIG_MIPS_PB1200)
  47         #include <pb1200.h>
  48 #else
  49         #include <asm/mach-db1x00/db1x00.h>
  50         static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
  51 #endif
  52
  53 #include "au1000_generic.h"
  54
  55 #if 0
  56 #define debug(x,args...) printk(KERN_DEBUG "%s: " x, __func__ , ##args)
  57 #else
  58 #define debug(x,args...)
  59 #endif
  60
  61
  62 struct au1000_pcmcia_socket au1000_pcmcia_socket[PCMCIA_NUM_SOCKS];
  63 extern int au1x00_pcmcia_socket_probe(struct device *, struct pcmcia_low_level *, int, int);
  64
  65 static int db1x00_pcmcia_hw_init(struct au1000_pcmcia_socket *skt)
  66 {
  67 #ifdef CONFIG_MIPS_DB1550
  68         skt->irq = skt->nr ? AU1000_GPIO_5 : AU1000_GPIO_3;
  69 #elif defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200)
  70         skt->irq = skt->nr ? BOARD_PC1_INT : BOARD_PC0_INT;
  71 #else
  72         skt->irq = skt->nr ? AU1000_GPIO_5 : AU1000_GPIO_2;
  73 #endif
  74         return 0;
  75 }
  76
  77 static void db1x00_pcmcia_shutdown(struct au1000_pcmcia_socket *skt)
  78 {
  79         bcsr->pcmcia = 0; /* turn off power */
  80         au_sync_delay(2);
  81 }
  82
  83 static void
  84 db1x00_pcmcia_socket_state(struct au1000_pcmcia_socket *skt, struct pcmcia_state *state)
  85 {
  86         u32 inserted;
  87         unsigned char vs;
  88
  89         state->ready = 0;
  90         state->vs_Xv = 0;
  91         state->vs_3v = 0;
  92         state->detect = 0;
  93
  94         switch (skt->nr) {
  95         case 0:
  96                 vs = bcsr->status & 0x3;
  97 #if defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200)
  98                 inserted = BOARD_CARD_INSERTED(0);
  99 #else
 100                 inserted = !(bcsr->status & (1<<4));
 101 #endif
 102                 break;
 103         case 1:
 104                 vs = (bcsr->status & 0xC)>>2;
 105 #if defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200)
 106                 inserted = BOARD_CARD_INSERTED(1);
 107 #else
 108                 inserted = !(bcsr->status & (1<<5));
 109 #endif
 110                 break;
 111         default:/* should never happen */
 112                 return;
 113         }
 114
 115         if (inserted)
 116                 debug("db1x00 socket %d: inserted %d, vs %d pcmcia %x\n",
 117                                 skt->nr, inserted, vs, bcsr->pcmcia);
 118
 119         if (inserted) {
 120                 switch (vs) {
 121                         case 0:
 122                         case 2:
 123                                 state->vs_3v=1;
 124                                 break;
 125                         case 3: /* 5V */
 126                                 break;
 127                         default:
 128                                 /* return without setting 'detect' */
 129                                 printk(KERN_ERR "db1x00 bad VS (%d)\n",
 130                                                 vs);
 131                 }
 132                 state->detect = 1;
 133                 state->ready = 1;
 134         }
 135         else {
 136                 /* if the card was previously inserted and then ejected,
 137                  * we should turn off power to it
 138                  */
 139                 if ((skt->nr == 0) && (bcsr->pcmcia & BCSR_PCMCIA_PC0RST)) {
 140                         bcsr->pcmcia &= ~(BCSR_PCMCIA_PC0RST |
 141                                         BCSR_PCMCIA_PC0DRVEN |
 142                                         BCSR_PCMCIA_PC0VPP |
 143                                         BCSR_PCMCIA_PC0VCC);
 144                         au_sync_delay(10);
 145                 }
 146                 else if ((skt->nr == 1) && bcsr->pcmcia & BCSR_PCMCIA_PC1RST) {
 147                         bcsr->pcmcia &= ~(BCSR_PCMCIA_PC1RST |
 148                                         BCSR_PCMCIA_PC1DRVEN |
 149                                         BCSR_PCMCIA_PC1VPP |
 150                                         BCSR_PCMCIA_PC1VCC);
 151                         au_sync_delay(10);
 152                 }
 153         }
 154
 155         state->bvd1=1;
 156         state->bvd2=1;
 157         state->wrprot=0;
 158 }
 159
 160 static int
 161 db1x00_pcmcia_configure_socket(struct au1000_pcmcia_socket *skt, struct socket_state_t *state)
 162 {
 163         u16 pwr;
 164         int sock = skt->nr;
 165
 166         debug("config_skt %d Vcc %dV Vpp %dV, reset %d\n",
 167                         sock, state->Vcc, state->Vpp,
 168                         state->flags & SS_RESET);
 169
 170         /* pcmcia reg was set to zero at init time. Be careful when
 171          * initializing a socket not to wipe out the settings of the
 172          * other socket.
 173          */
 174         pwr = bcsr->pcmcia;
 175         pwr &= ~(0xf << sock*8); /* clear voltage settings */
 176
 177         state->Vpp = 0;
 178         switch(state->Vcc){
 179                 case 0:  /* Vcc 0 */
 180                         pwr |= SET_VCC_VPP(0,0,sock);
 181                         break;
 182                 case 50: /* Vcc 5V */
 183                         switch(state->Vpp) {
 184                                 case 0:
 185                                         pwr |= SET_VCC_VPP(2,0,sock);
 186                                         break;
 187                                 case 50:
 188                                         pwr |= SET_VCC_VPP(2,1,sock);
 189                                         break;
 190                                 case 12:
 191                                         pwr |= SET_VCC_VPP(2,2,sock);
 192                                         break;
 193                                 case 33:
 194                                 default:
 195                                         pwr |= SET_VCC_VPP(0,0,sock);
 196                                         printk("%s: bad Vcc/Vpp (%d:%d)\n",
 197                                                         __func__,
 198                                                         state->Vcc,
 199                                                         state->Vpp);
 200                                         break;
 201                         }
 202                         break;
 203                 case 33: /* Vcc 3.3V */
 204                         switch(state->Vpp) {
 205                                 case 0:
 206                                         pwr |= SET_VCC_VPP(1,0,sock);
 207                                         break;
 208                                 case 12:
 209                                         pwr |= SET_VCC_VPP(1,2,sock);
 210                                         break;
 211                                 case 33:
 212                                         pwr |= SET_VCC_VPP(1,1,sock);
 213                                         break;
 214                                 case 50:
 215                                 default:
 216                                         pwr |= SET_VCC_VPP(0,0,sock);
 217                                         printk("%s: bad Vcc/Vpp (%d:%d)\n",
 218                                                         __func__,
 219                                                         state->Vcc,
 220                                                         state->Vpp);
 221                                         break;
 222                         }
 223                         break;
 224                 default: /* what's this ? */
 225                         pwr |= SET_VCC_VPP(0,0,sock);
 226                         printk(KERN_ERR "%s: bad Vcc %d\n",
 227                                         __func__, state->Vcc);
 228                         break;
 229         }
 230
 231         bcsr->pcmcia = pwr;
 232         au_sync_delay(300);
 233
 234         if (sock == 0) {
 235                 if (!(state->flags & SS_RESET)) {
 236                         pwr |= BCSR_PCMCIA_PC0DRVEN;
 237                         bcsr->pcmcia = pwr;
 238                         au_sync_delay(300);
 239                         pwr |= BCSR_PCMCIA_PC0RST;
 240                         bcsr->pcmcia = pwr;
 241                         au_sync_delay(100);
 242                 }
 243                 else {
 244                         pwr &= ~(BCSR_PCMCIA_PC0RST | BCSR_PCMCIA_PC0DRVEN);
 245                         bcsr->pcmcia = pwr;
 246                         au_sync_delay(100);
 247                 }
 248         }
 249         else {
 250                 if (!(state->flags & SS_RESET)) {
 251                         pwr |= BCSR_PCMCIA_PC1DRVEN;
 252                         bcsr->pcmcia = pwr;
 253                         au_sync_delay(300);
 254                         pwr |= BCSR_PCMCIA_PC1RST;
 255                         bcsr->pcmcia = pwr;
 256                         au_sync_delay(100);
 257                 }
 258                 else {
 259                         pwr &= ~(BCSR_PCMCIA_PC1RST | BCSR_PCMCIA_PC1DRVEN);
 260                         bcsr->pcmcia = pwr;
 261                         au_sync_delay(100);
 262                 }
 263         }
 264         return 0;
 265 }
 266
 267 /*
 268  * Enable card status IRQs on (re-)initialisation.  This can
 269  * be called at initialisation, power management event, or
 270  * pcmcia event.
 271  */
 272 void db1x00_socket_init(struct au1000_pcmcia_socket *skt)
 273 {
 274         /* nothing to do for now */
 275 }
 276
 277 /*
 278  * Disable card status IRQs and PCMCIA bus on suspend.
 279  */
 280 void db1x00_socket_suspend(struct au1000_pcmcia_socket *skt)
 281 {
 282         /* nothing to do for now */
 283 }
 284
 285 struct pcmcia_low_level db1x00_pcmcia_ops = {
 286         .owner                  = THIS_MODULE,
 287
 288         .hw_init                = db1x00_pcmcia_hw_init,
 289         .hw_shutdown            = db1x00_pcmcia_shutdown,
 290
 291         .socket_state           = db1x00_pcmcia_socket_state,
 292         .configure_socket       = db1x00_pcmcia_configure_socket,
 293
 294         .socket_init            = db1x00_socket_init,
 295         .socket_suspend         = db1x00_socket_suspend
 296 };
 297
 298 int au1x_board_init(struct device *dev)
 299 {
 300         int ret = -ENODEV;
 301         bcsr->pcmcia = 0; /* turn off power, if it's not already off */
 302         au_sync_delay(2);
 303         ret = au1x00_pcmcia_socket_probe(dev, &db1x00_pcmcia_ops, 0, 2);
 304         return ret;
 305 }