Merge branch 'avr32-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemo...
[linux-2.6] / arch / blackfin / kernel / setup.c
1 /*
2  * arch/blackfin/kernel/setup.c
3  *
4  * Copyright 2004-2006 Analog Devices Inc.
5  *
6  * Enter bugs at http://blackfin.uclinux.org/
7  *
8  * Licensed under the GPL-2 or later.
9  */
10
11 #include <linux/delay.h>
12 #include <linux/console.h>
13 #include <linux/bootmem.h>
14 #include <linux/seq_file.h>
15 #include <linux/cpu.h>
16 #include <linux/module.h>
17 #include <linux/tty.h>
18 #include <linux/pfn.h>
19
20 #include <linux/ext2_fs.h>
21 #include <linux/cramfs_fs.h>
22 #include <linux/romfs_fs.h>
23
24 #include <asm/cplb.h>
25 #include <asm/cacheflush.h>
26 #include <asm/blackfin.h>
27 #include <asm/cplbinit.h>
28 #include <asm/div64.h>
29 #include <asm/fixed_code.h>
30 #include <asm/early_printk.h>
31
32 static DEFINE_PER_CPU(struct cpu, cpu_devices);
33
34 u16 _bfin_swrst;
35 EXPORT_SYMBOL(_bfin_swrst);
36
37 unsigned long memory_start, memory_end, physical_mem_end;
38 unsigned long reserved_mem_dcache_on;
39 unsigned long reserved_mem_icache_on;
40 EXPORT_SYMBOL(memory_start);
41 EXPORT_SYMBOL(memory_end);
42 EXPORT_SYMBOL(physical_mem_end);
43 EXPORT_SYMBOL(_ramend);
44
45 #ifdef CONFIG_MTD_UCLINUX
46 unsigned long memory_mtd_end, memory_mtd_start, mtd_size;
47 unsigned long _ebss;
48 EXPORT_SYMBOL(memory_mtd_end);
49 EXPORT_SYMBOL(memory_mtd_start);
50 EXPORT_SYMBOL(mtd_size);
51 #endif
52
53 char __initdata command_line[COMMAND_LINE_SIZE];
54
55 /* boot memmap, for parsing "memmap=" */
56 #define BFIN_MEMMAP_MAX         128 /* number of entries in bfin_memmap */
57 #define BFIN_MEMMAP_RAM         1
58 #define BFIN_MEMMAP_RESERVED    2
59 struct bfin_memmap {
60         int nr_map;
61         struct bfin_memmap_entry {
62                 unsigned long long addr; /* start of memory segment */
63                 unsigned long long size;
64                 unsigned long type;
65         } map[BFIN_MEMMAP_MAX];
66 } bfin_memmap __initdata;
67
68 /* for memmap sanitization */
69 struct change_member {
70         struct bfin_memmap_entry *pentry; /* pointer to original entry */
71         unsigned long long addr; /* address for this change point */
72 };
73 static struct change_member change_point_list[2*BFIN_MEMMAP_MAX] __initdata;
74 static struct change_member *change_point[2*BFIN_MEMMAP_MAX] __initdata;
75 static struct bfin_memmap_entry *overlap_list[BFIN_MEMMAP_MAX] __initdata;
76 static struct bfin_memmap_entry new_map[BFIN_MEMMAP_MAX] __initdata;
77
78 void __init bf53x_cache_init(void)
79 {
80 #if defined(CONFIG_BFIN_DCACHE) || defined(CONFIG_BFIN_ICACHE)
81         generate_cpl_tables();
82 #endif
83
84 #ifdef CONFIG_BFIN_ICACHE
85         bfin_icache_init();
86         printk(KERN_INFO "Instruction Cache Enabled\n");
87 #endif
88
89 #ifdef CONFIG_BFIN_DCACHE
90         bfin_dcache_init();
91         printk(KERN_INFO "Data Cache Enabled"
92 # if defined CONFIG_BFIN_WB
93                 " (write-back)"
94 # elif defined CONFIG_BFIN_WT
95                 " (write-through)"
96 # endif
97                 "\n");
98 #endif
99 }
100
101 void __init bf53x_relocate_l1_mem(void)
102 {
103         unsigned long l1_code_length;
104         unsigned long l1_data_a_length;
105         unsigned long l1_data_b_length;
106
107         l1_code_length = _etext_l1 - _stext_l1;
108         if (l1_code_length > L1_CODE_LENGTH)
109                 l1_code_length = L1_CODE_LENGTH;
110         /* cannot complain as printk is not available as yet.
111          * But we can continue booting and complain later!
112          */
113
114         /* Copy _stext_l1 to _etext_l1 to L1 instruction SRAM */
115         dma_memcpy(_stext_l1, _l1_lma_start, l1_code_length);
116
117         l1_data_a_length = _ebss_l1 - _sdata_l1;
118         if (l1_data_a_length > L1_DATA_A_LENGTH)
119                 l1_data_a_length = L1_DATA_A_LENGTH;
120
121         /* Copy _sdata_l1 to _ebss_l1 to L1 data bank A SRAM */
122         dma_memcpy(_sdata_l1, _l1_lma_start + l1_code_length, l1_data_a_length);
123
124         l1_data_b_length = _ebss_b_l1 - _sdata_b_l1;
125         if (l1_data_b_length > L1_DATA_B_LENGTH)
126                 l1_data_b_length = L1_DATA_B_LENGTH;
127
128         /* Copy _sdata_b_l1 to _ebss_b_l1 to L1 data bank B SRAM */
129         dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length +
130                         l1_data_a_length, l1_data_b_length);
131
132 }
133
134 /* add_memory_region to memmap */
135 static void __init add_memory_region(unsigned long long start,
136                               unsigned long long size, int type)
137 {
138         int i;
139
140         i = bfin_memmap.nr_map;
141
142         if (i == BFIN_MEMMAP_MAX) {
143                 printk(KERN_ERR "Ooops! Too many entries in the memory map!\n");
144                 return;
145         }
146
147         bfin_memmap.map[i].addr = start;
148         bfin_memmap.map[i].size = size;
149         bfin_memmap.map[i].type = type;
150         bfin_memmap.nr_map++;
151 }
152
153 /*
154  * Sanitize the boot memmap, removing overlaps.
155  */
156 static int __init sanitize_memmap(struct bfin_memmap_entry *map, int *pnr_map)
157 {
158         struct change_member *change_tmp;
159         unsigned long current_type, last_type;
160         unsigned long long last_addr;
161         int chgidx, still_changing;
162         int overlap_entries;
163         int new_entry;
164         int old_nr, new_nr, chg_nr;
165         int i;
166
167         /*
168                 Visually we're performing the following (1,2,3,4 = memory types)
169
170                 Sample memory map (w/overlaps):
171                    ____22__________________
172                    ______________________4_
173                    ____1111________________
174                    _44_____________________
175                    11111111________________
176                    ____________________33__
177                    ___________44___________
178                    __________33333_________
179                    ______________22________
180                    ___________________2222_
181                    _________111111111______
182                    _____________________11_
183                    _________________4______
184
185                 Sanitized equivalent (no overlap):
186                    1_______________________
187                    _44_____________________
188                    ___1____________________
189                    ____22__________________
190                    ______11________________
191                    _________1______________
192                    __________3_____________
193                    ___________44___________
194                    _____________33_________
195                    _______________2________
196                    ________________1_______
197                    _________________4______
198                    ___________________2____
199                    ____________________33__
200                    ______________________4_
201         */
202         /* if there's only one memory region, don't bother */
203         if (*pnr_map < 2)
204                 return -1;
205
206         old_nr = *pnr_map;
207
208         /* bail out if we find any unreasonable addresses in memmap */
209         for (i = 0; i < old_nr; i++)
210                 if (map[i].addr + map[i].size < map[i].addr)
211                         return -1;
212
213         /* create pointers for initial change-point information (for sorting) */
214         for (i = 0; i < 2*old_nr; i++)
215                 change_point[i] = &change_point_list[i];
216
217         /* record all known change-points (starting and ending addresses),
218            omitting those that are for empty memory regions */
219         chgidx = 0;
220         for (i = 0; i < old_nr; i++)    {
221                 if (map[i].size != 0) {
222                         change_point[chgidx]->addr = map[i].addr;
223                         change_point[chgidx++]->pentry = &map[i];
224                         change_point[chgidx]->addr = map[i].addr + map[i].size;
225                         change_point[chgidx++]->pentry = &map[i];
226                 }
227         }
228         chg_nr = chgidx;        /* true number of change-points */
229
230         /* sort change-point list by memory addresses (low -> high) */
231         still_changing = 1;
232         while (still_changing)  {
233                 still_changing = 0;
234                 for (i = 1; i < chg_nr; i++)  {
235                         /* if <current_addr> > <last_addr>, swap */
236                         /* or, if current=<start_addr> & last=<end_addr>, swap */
237                         if ((change_point[i]->addr < change_point[i-1]->addr) ||
238                                 ((change_point[i]->addr == change_point[i-1]->addr) &&
239                                  (change_point[i]->addr == change_point[i]->pentry->addr) &&
240                                  (change_point[i-1]->addr != change_point[i-1]->pentry->addr))
241                            ) {
242                                 change_tmp = change_point[i];
243                                 change_point[i] = change_point[i-1];
244                                 change_point[i-1] = change_tmp;
245                                 still_changing = 1;
246                         }
247                 }
248         }
249
250         /* create a new memmap, removing overlaps */
251         overlap_entries = 0;     /* number of entries in the overlap table */
252         new_entry = 0;   /* index for creating new memmap entries */
253         last_type = 0;           /* start with undefined memory type */
254         last_addr = 0;           /* start with 0 as last starting address */
255         /* loop through change-points, determining affect on the new memmap */
256         for (chgidx = 0; chgidx < chg_nr; chgidx++) {
257                 /* keep track of all overlapping memmap entries */
258                 if (change_point[chgidx]->addr == change_point[chgidx]->pentry->addr) {
259                         /* add map entry to overlap list (> 1 entry implies an overlap) */
260                         overlap_list[overlap_entries++] = change_point[chgidx]->pentry;
261                 } else {
262                         /* remove entry from list (order independent, so swap with last) */
263                         for (i = 0; i < overlap_entries; i++) {
264                                 if (overlap_list[i] == change_point[chgidx]->pentry)
265                                         overlap_list[i] = overlap_list[overlap_entries-1];
266                         }
267                         overlap_entries--;
268                 }
269                 /* if there are overlapping entries, decide which "type" to use */
270                 /* (larger value takes precedence -- 1=usable, 2,3,4,4+=unusable) */
271                 current_type = 0;
272                 for (i = 0; i < overlap_entries; i++)
273                         if (overlap_list[i]->type > current_type)
274                                 current_type = overlap_list[i]->type;
275                 /* continue building up new memmap based on this information */
276                 if (current_type != last_type)  {
277                         if (last_type != 0) {
278                                 new_map[new_entry].size =
279                                         change_point[chgidx]->addr - last_addr;
280                                 /* move forward only if the new size was non-zero */
281                                 if (new_map[new_entry].size != 0)
282                                         if (++new_entry >= BFIN_MEMMAP_MAX)
283                                                 break;  /* no more space left for new entries */
284                         }
285                         if (current_type != 0) {
286                                 new_map[new_entry].addr = change_point[chgidx]->addr;
287                                 new_map[new_entry].type = current_type;
288                                 last_addr = change_point[chgidx]->addr;
289                         }
290                         last_type = current_type;
291                 }
292         }
293         new_nr = new_entry;   /* retain count for new entries */
294
295         /* copy new  mapping into original location */
296         memcpy(map, new_map, new_nr*sizeof(struct bfin_memmap_entry));
297         *pnr_map = new_nr;
298
299         return 0;
300 }
301
302 static void __init print_memory_map(char *who)
303 {
304         int i;
305
306         for (i = 0; i < bfin_memmap.nr_map; i++) {
307                 printk(KERN_DEBUG " %s: %016Lx - %016Lx ", who,
308                         bfin_memmap.map[i].addr,
309                         bfin_memmap.map[i].addr + bfin_memmap.map[i].size);
310                 switch (bfin_memmap.map[i].type) {
311                 case BFIN_MEMMAP_RAM:
312                                 printk("(usable)\n");
313                                 break;
314                 case BFIN_MEMMAP_RESERVED:
315                                 printk("(reserved)\n");
316                                 break;
317                 default:        printk("type %lu\n", bfin_memmap.map[i].type);
318                                 break;
319                 }
320         }
321 }
322
323 static __init int parse_memmap(char *arg)
324 {
325         unsigned long long start_at, mem_size;
326
327         if (!arg)
328                 return -EINVAL;
329
330         mem_size = memparse(arg, &arg);
331         if (*arg == '@') {
332                 start_at = memparse(arg+1, &arg);
333                 add_memory_region(start_at, mem_size, BFIN_MEMMAP_RAM);
334         } else if (*arg == '$') {
335                 start_at = memparse(arg+1, &arg);
336                 add_memory_region(start_at, mem_size, BFIN_MEMMAP_RESERVED);
337         }
338
339         return 0;
340 }
341
342 /*
343  * Initial parsing of the command line.  Currently, we support:
344  *  - Controlling the linux memory size: mem=xxx[KMG]
345  *  - Controlling the physical memory size: max_mem=xxx[KMG][$][#]
346  *       $ -> reserved memory is dcacheable
347  *       # -> reserved memory is icacheable
348  *  - "memmap=XXX[KkmM][@][$]XXX[KkmM]" defines a memory region
349  *       @ from <start> to <start>+<mem>, type RAM
350  *       $ from <start> to <start>+<mem>, type RESERVED
351  *
352  */
353 static __init void parse_cmdline_early(char *cmdline_p)
354 {
355         char c = ' ', *to = cmdline_p;
356         unsigned int memsize;
357         for (;;) {
358                 if (c == ' ') {
359                         if (!memcmp(to, "mem=", 4)) {
360                                 to += 4;
361                                 memsize = memparse(to, &to);
362                                 if (memsize)
363                                         _ramend = memsize;
364
365                         } else if (!memcmp(to, "max_mem=", 8)) {
366                                 to += 8;
367                                 memsize = memparse(to, &to);
368                                 if (memsize) {
369                                         physical_mem_end = memsize;
370                                         if (*to != ' ') {
371                                                 if (*to == '$'
372                                                     || *(to + 1) == '$')
373                                                         reserved_mem_dcache_on =
374                                                             1;
375                                                 if (*to == '#'
376                                                     || *(to + 1) == '#')
377                                                         reserved_mem_icache_on =
378                                                             1;
379                                         }
380                                 }
381                         } else if (!memcmp(to, "earlyprintk=", 12)) {
382                                 to += 12;
383                                 setup_early_printk(to);
384                         } else if (!memcmp(to, "memmap=", 7)) {
385                                 to += 7;
386                                 parse_memmap(to);
387                         }
388                 }
389                 c = *(to++);
390                 if (!c)
391                         break;
392         }
393 }
394
395 /*
396  * Setup memory defaults from user config.
397  * The physical memory layout looks like:
398  *
399  *  [_rambase, _ramstart]:              kernel image
400  *  [memory_start, memory_end]:         dynamic memory managed by kernel
401  *  [memory_end, _ramend]:              reserved memory
402  *      [meory_mtd_start(memory_end),
403  *              memory_mtd_start + mtd_size]:   rootfs (if any)
404  *      [_ramend - DMA_UNCACHED_REGION,
405  *              _ramend]:                       uncached DMA region
406  *  [_ramend, physical_mem_end]:        memory not managed by kernel
407  *
408  */
409 static __init void  memory_setup(void)
410 {
411 #ifdef CONFIG_MTD_UCLINUX
412         unsigned long mtd_phys = 0;
413 #endif
414
415         _rambase = (unsigned long)_stext;
416         _ramstart = (unsigned long)_end;
417
418         if (DMA_UNCACHED_REGION > (_ramend - _ramstart)) {
419                 console_init();
420                 panic("DMA region exceeds memory limit: %lu.\n",
421                         _ramend - _ramstart);
422         }
423         memory_end = _ramend - DMA_UNCACHED_REGION;
424
425 #ifdef CONFIG_MPU
426         /* Round up to multiple of 4MB.  */
427         memory_start = (_ramstart + 0x3fffff) & ~0x3fffff;
428 #else
429         memory_start = PAGE_ALIGN(_ramstart);
430 #endif
431
432 #if defined(CONFIG_MTD_UCLINUX)
433         /* generic memory mapped MTD driver */
434         memory_mtd_end = memory_end;
435
436         mtd_phys = _ramstart;
437         mtd_size = PAGE_ALIGN(*((unsigned long *)(mtd_phys + 8)));
438
439 # if defined(CONFIG_EXT2_FS) || defined(CONFIG_EXT3_FS)
440         if (*((unsigned short *)(mtd_phys + 0x438)) == EXT2_SUPER_MAGIC)
441                 mtd_size =
442                     PAGE_ALIGN(*((unsigned long *)(mtd_phys + 0x404)) << 10);
443 # endif
444
445 # if defined(CONFIG_CRAMFS)
446         if (*((unsigned long *)(mtd_phys)) == CRAMFS_MAGIC)
447                 mtd_size = PAGE_ALIGN(*((unsigned long *)(mtd_phys + 0x4)));
448 # endif
449
450 # if defined(CONFIG_ROMFS_FS)
451         if (((unsigned long *)mtd_phys)[0] == ROMSB_WORD0
452             && ((unsigned long *)mtd_phys)[1] == ROMSB_WORD1)
453                 mtd_size =
454                     PAGE_ALIGN(be32_to_cpu(((unsigned long *)mtd_phys)[2]));
455 #  if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263)
456         /* Due to a Hardware Anomaly we need to limit the size of usable
457          * instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
458          * 05000263 - Hardware loop corrupted when taking an ICPLB exception
459          */
460 #   if (defined(CONFIG_DEBUG_HUNT_FOR_ZERO))
461         if (memory_end >= 56 * 1024 * 1024)
462                 memory_end = 56 * 1024 * 1024;
463 #   else
464         if (memory_end >= 60 * 1024 * 1024)
465                 memory_end = 60 * 1024 * 1024;
466 #   endif                               /* CONFIG_DEBUG_HUNT_FOR_ZERO */
467 #  endif                                /* ANOMALY_05000263 */
468 # endif                         /* CONFIG_ROMFS_FS */
469
470         memory_end -= mtd_size;
471
472         if (mtd_size == 0) {
473                 console_init();
474                 panic("Don't boot kernel without rootfs attached.\n");
475         }
476
477         /* Relocate MTD image to the top of memory after the uncached memory area */
478         dma_memcpy((char *)memory_end, _end, mtd_size);
479
480         memory_mtd_start = memory_end;
481         _ebss = memory_mtd_start;       /* define _ebss for compatible */
482 #endif                          /* CONFIG_MTD_UCLINUX */
483
484 #if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263)
485         /* Due to a Hardware Anomaly we need to limit the size of usable
486          * instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
487          * 05000263 - Hardware loop corrupted when taking an ICPLB exception
488          */
489 #if (defined(CONFIG_DEBUG_HUNT_FOR_ZERO))
490         if (memory_end >= 56 * 1024 * 1024)
491                 memory_end = 56 * 1024 * 1024;
492 #else
493         if (memory_end >= 60 * 1024 * 1024)
494                 memory_end = 60 * 1024 * 1024;
495 #endif                          /* CONFIG_DEBUG_HUNT_FOR_ZERO */
496         printk(KERN_NOTICE "Warning: limiting memory to %liMB due to hardware anomaly 05000263\n", memory_end >> 20);
497 #endif                          /* ANOMALY_05000263 */
498
499 #ifdef CONFIG_MPU
500         page_mask_nelts = ((_ramend >> PAGE_SHIFT) + 31) / 32;
501         page_mask_order = get_order(3 * page_mask_nelts * sizeof(long));
502 #endif
503
504 #if !defined(CONFIG_MTD_UCLINUX)
505         /*In case there is no valid CPLB behind memory_end make sure we don't get to close*/
506         memory_end -= SIZE_4K;
507 #endif
508
509         init_mm.start_code = (unsigned long)_stext;
510         init_mm.end_code = (unsigned long)_etext;
511         init_mm.end_data = (unsigned long)_edata;
512         init_mm.brk = (unsigned long)0;
513
514         printk(KERN_INFO "Board Memory: %ldMB\n", physical_mem_end >> 20);
515         printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20);
516
517         printk(KERN_INFO "Memory map:\n"
518                 KERN_INFO "  fixedcode = 0x%p-0x%p\n"
519                 KERN_INFO "  text      = 0x%p-0x%p\n"
520                 KERN_INFO "  rodata    = 0x%p-0x%p\n"
521                 KERN_INFO "  bss       = 0x%p-0x%p\n"
522                 KERN_INFO "  data      = 0x%p-0x%p\n"
523                 KERN_INFO "    stack   = 0x%p-0x%p\n"
524                 KERN_INFO "  init      = 0x%p-0x%p\n"
525                 KERN_INFO "  available = 0x%p-0x%p\n"
526 #ifdef CONFIG_MTD_UCLINUX
527                 KERN_INFO "  rootfs    = 0x%p-0x%p\n"
528 #endif
529 #if DMA_UNCACHED_REGION > 0
530                 KERN_INFO "  DMA Zone  = 0x%p-0x%p\n"
531 #endif
532                 , (void *)FIXED_CODE_START, (void *)FIXED_CODE_END,
533                 _stext, _etext,
534                 __start_rodata, __end_rodata,
535                 __bss_start, __bss_stop,
536                 _sdata, _edata,
537                 (void *)&init_thread_union,
538                 (void *)((int)(&init_thread_union) + 0x2000),
539                 __init_begin, __init_end,
540                 (void *)_ramstart, (void *)memory_end
541 #ifdef CONFIG_MTD_UCLINUX
542                 , (void *)memory_mtd_start, (void *)(memory_mtd_start + mtd_size)
543 #endif
544 #if DMA_UNCACHED_REGION > 0
545                 , (void *)(_ramend - DMA_UNCACHED_REGION), (void *)(_ramend)
546 #endif
547                 );
548 }
549
550 static __init void setup_bootmem_allocator(void)
551 {
552         int bootmap_size;
553         int i;
554         unsigned long min_pfn, max_pfn;
555         unsigned long curr_pfn, last_pfn, size;
556
557         /* mark memory between memory_start and memory_end usable */
558         add_memory_region(memory_start,
559                 memory_end - memory_start, BFIN_MEMMAP_RAM);
560         /* sanity check for overlap */
561         sanitize_memmap(bfin_memmap.map, &bfin_memmap.nr_map);
562         print_memory_map("boot memmap");
563
564         min_pfn = PAGE_OFFSET >> PAGE_SHIFT;
565         max_pfn = memory_end >> PAGE_SHIFT;
566
567         /*
568          * give all the memory to the bootmap allocator,  tell it to put the
569          * boot mem_map at the start of memory.
570          */
571         bootmap_size = init_bootmem_node(NODE_DATA(0),
572                         memory_start >> PAGE_SHIFT,     /* map goes here */
573                         min_pfn, max_pfn);
574
575         /* register the memmap regions with the bootmem allocator */
576         for (i = 0; i < bfin_memmap.nr_map; i++) {
577                 /*
578                  * Reserve usable memory
579                  */
580                 if (bfin_memmap.map[i].type != BFIN_MEMMAP_RAM)
581                         continue;
582                 /*
583                  * We are rounding up the start address of usable memory:
584                  */
585                 curr_pfn = PFN_UP(bfin_memmap.map[i].addr);
586                 if (curr_pfn >= max_pfn)
587                         continue;
588                 /*
589                  * ... and at the end of the usable range downwards:
590                  */
591                 last_pfn = PFN_DOWN(bfin_memmap.map[i].addr +
592                                          bfin_memmap.map[i].size);
593
594                 if (last_pfn > max_pfn)
595                         last_pfn = max_pfn;
596
597                 /*
598                  * .. finally, did all the rounding and playing
599                  * around just make the area go away?
600                  */
601                 if (last_pfn <= curr_pfn)
602                         continue;
603
604                 size = last_pfn - curr_pfn;
605                 free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(size));
606         }
607
608         /* reserve memory before memory_start, including bootmap */
609         reserve_bootmem(PAGE_OFFSET,
610                 memory_start + bootmap_size + PAGE_SIZE - 1 - PAGE_OFFSET,
611                 BOOTMEM_DEFAULT);
612 }
613
614 void __init setup_arch(char **cmdline_p)
615 {
616         unsigned long l1_length, sclk, cclk;
617
618 #ifdef CONFIG_DUMMY_CONSOLE
619         conswitchp = &dummy_con;
620 #endif
621
622 #if defined(CONFIG_CMDLINE_BOOL)
623         strncpy(&command_line[0], CONFIG_CMDLINE, sizeof(command_line));
624         command_line[sizeof(command_line) - 1] = 0;
625 #endif
626
627         /* Keep a copy of command line */
628         *cmdline_p = &command_line[0];
629         memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
630         boot_command_line[COMMAND_LINE_SIZE - 1] = '\0';
631
632         /* setup memory defaults from the user config */
633         physical_mem_end = 0;
634         _ramend = CONFIG_MEM_SIZE * 1024 * 1024;
635
636         memset(&bfin_memmap, 0, sizeof(bfin_memmap));
637
638         parse_cmdline_early(&command_line[0]);
639
640         if (physical_mem_end == 0)
641                 physical_mem_end = _ramend;
642
643         memory_setup();
644
645         cclk = get_cclk();
646         sclk = get_sclk();
647
648 #if !defined(CONFIG_BFIN_KERNEL_CLOCK)
649         if (ANOMALY_05000273 && cclk == sclk)
650                 panic("ANOMALY 05000273, SCLK can not be same as CCLK");
651 #endif
652
653 #ifdef BF561_FAMILY
654         if (ANOMALY_05000266) {
655                 bfin_read_IMDMA_D0_IRQ_STATUS();
656                 bfin_read_IMDMA_D1_IRQ_STATUS();
657         }
658 #endif
659         printk(KERN_INFO "Hardware Trace ");
660         if (bfin_read_TBUFCTL() & 0x1)
661                 printk("Active ");
662         else
663                 printk("Off ");
664         if (bfin_read_TBUFCTL() & 0x2)
665                 printk("and Enabled\n");
666         else
667         printk("and Disabled\n");
668
669 #if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH)
670         /* we need to initialize the Flashrom device here since we might
671          * do things with flash early on in the boot
672          */
673         flash_probe();
674 #endif
675
676         _bfin_swrst = bfin_read_SWRST();
677
678         if (_bfin_swrst & RESET_DOUBLE)
679                 printk(KERN_INFO "Recovering from Double Fault event\n");
680         else if (_bfin_swrst & RESET_WDOG)
681                 printk(KERN_INFO "Recovering from Watchdog event\n");
682         else if (_bfin_swrst & RESET_SOFTWARE)
683                 printk(KERN_NOTICE "Reset caused by Software reset\n");
684
685         printk(KERN_INFO "Blackfin support (C) 2004-2008 Analog Devices, Inc.\n");
686         if (bfin_compiled_revid() == 0xffff)
687                 printk(KERN_INFO "Compiled for ADSP-%s Rev any\n", CPU);
688         else if (bfin_compiled_revid() == -1)
689                 printk(KERN_INFO "Compiled for ADSP-%s Rev none\n", CPU);
690         else
691                 printk(KERN_INFO "Compiled for ADSP-%s Rev 0.%d\n", CPU, bfin_compiled_revid());
692         if (bfin_revid() != bfin_compiled_revid()) {
693                 if (bfin_compiled_revid() == -1)
694                         printk(KERN_ERR "Warning: Compiled for Rev none, but running on Rev %d\n",
695                                bfin_revid());
696                 else if (bfin_compiled_revid() != 0xffff)
697                         printk(KERN_ERR "Warning: Compiled for Rev %d, but running on Rev %d\n",
698                                bfin_compiled_revid(), bfin_revid());
699         }
700         if (bfin_revid() < SUPPORTED_REVID)
701                 printk(KERN_ERR "Warning: Unsupported Chip Revision ADSP-%s Rev 0.%d detected\n",
702                        CPU, bfin_revid());
703         printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");
704
705         printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n",
706                cclk / 1000000,  sclk / 1000000);
707
708         if (ANOMALY_05000273 && (cclk >> 1) <= sclk)
709                 printk("\n\n\nANOMALY_05000273: CCLK must be >= 2*SCLK !!!\n\n\n");
710
711         setup_bootmem_allocator();
712
713         paging_init();
714
715         /* check the size of the l1 area */
716         l1_length = _etext_l1 - _stext_l1;
717         if (l1_length > L1_CODE_LENGTH)
718                 panic("L1 code memory overflow\n");
719
720         l1_length = _ebss_l1 - _sdata_l1;
721         if (l1_length > L1_DATA_A_LENGTH)
722                 panic("L1 data memory overflow\n");
723
724         /* Copy atomic sequences to their fixed location, and sanity check that
725            these locations are the ones that we advertise to userspace.  */
726         memcpy((void *)FIXED_CODE_START, &fixed_code_start,
727                FIXED_CODE_END - FIXED_CODE_START);
728         BUG_ON((char *)&sigreturn_stub - (char *)&fixed_code_start
729                != SIGRETURN_STUB - FIXED_CODE_START);
730         BUG_ON((char *)&atomic_xchg32 - (char *)&fixed_code_start
731                != ATOMIC_XCHG32 - FIXED_CODE_START);
732         BUG_ON((char *)&atomic_cas32 - (char *)&fixed_code_start
733                != ATOMIC_CAS32 - FIXED_CODE_START);
734         BUG_ON((char *)&atomic_add32 - (char *)&fixed_code_start
735                != ATOMIC_ADD32 - FIXED_CODE_START);
736         BUG_ON((char *)&atomic_sub32 - (char *)&fixed_code_start
737                != ATOMIC_SUB32 - FIXED_CODE_START);
738         BUG_ON((char *)&atomic_ior32 - (char *)&fixed_code_start
739                != ATOMIC_IOR32 - FIXED_CODE_START);
740         BUG_ON((char *)&atomic_and32 - (char *)&fixed_code_start
741                != ATOMIC_AND32 - FIXED_CODE_START);
742         BUG_ON((char *)&atomic_xor32 - (char *)&fixed_code_start
743                != ATOMIC_XOR32 - FIXED_CODE_START);
744         BUG_ON((char *)&safe_user_instruction - (char *)&fixed_code_start
745                 != SAFE_USER_INSTRUCTION - FIXED_CODE_START);
746
747         init_exception_vectors();
748         bf53x_cache_init();
749 }
750
751 static int __init topology_init(void)
752 {
753         int cpu;
754
755         for_each_possible_cpu(cpu) {
756                 struct cpu *c = &per_cpu(cpu_devices, cpu);
757
758                 register_cpu(c, cpu);
759         }
760
761         return 0;
762 }
763
764 subsys_initcall(topology_init);
765
766 static u_long get_vco(void)
767 {
768         u_long msel;
769         u_long vco;
770
771         msel = (bfin_read_PLL_CTL() >> 9) & 0x3F;
772         if (0 == msel)
773                 msel = 64;
774
775         vco = CONFIG_CLKIN_HZ;
776         vco >>= (1 & bfin_read_PLL_CTL());      /* DF bit */
777         vco = msel * vco;
778         return vco;
779 }
780
781 /* Get the Core clock */
782 u_long get_cclk(void)
783 {
784         u_long csel, ssel;
785         if (bfin_read_PLL_STAT() & 0x1)
786                 return CONFIG_CLKIN_HZ;
787
788         ssel = bfin_read_PLL_DIV();
789         csel = ((ssel >> 4) & 0x03);
790         ssel &= 0xf;
791         if (ssel && ssel < (1 << csel)) /* SCLK > CCLK */
792                 return get_vco() / ssel;
793         return get_vco() >> csel;
794 }
795 EXPORT_SYMBOL(get_cclk);
796
797 /* Get the System clock */
798 u_long get_sclk(void)
799 {
800         u_long ssel;
801
802         if (bfin_read_PLL_STAT() & 0x1)
803                 return CONFIG_CLKIN_HZ;
804
805         ssel = (bfin_read_PLL_DIV() & 0xf);
806         if (0 == ssel) {
807                 printk(KERN_WARNING "Invalid System Clock\n");
808                 ssel = 1;
809         }
810
811         return get_vco() / ssel;
812 }
813 EXPORT_SYMBOL(get_sclk);
814
815 unsigned long sclk_to_usecs(unsigned long sclk)
816 {
817         u64 tmp = USEC_PER_SEC * (u64)sclk;
818         do_div(tmp, get_sclk());
819         return tmp;
820 }
821 EXPORT_SYMBOL(sclk_to_usecs);
822
823 unsigned long usecs_to_sclk(unsigned long usecs)
824 {
825         u64 tmp = get_sclk() * (u64)usecs;
826         do_div(tmp, USEC_PER_SEC);
827         return tmp;
828 }
829 EXPORT_SYMBOL(usecs_to_sclk);
830
831 /*
832  *      Get CPU information for use by the procfs.
833  */
834 static int show_cpuinfo(struct seq_file *m, void *v)
835 {
836         char *cpu, *mmu, *fpu, *vendor, *cache;
837         uint32_t revid;
838
839         u_long cclk = 0, sclk = 0;
840         u_int dcache_size = 0, dsup_banks = 0;
841
842         cpu = CPU;
843         mmu = "none";
844         fpu = "none";
845         revid = bfin_revid();
846
847         cclk = get_cclk();
848         sclk = get_sclk();
849
850         switch (bfin_read_CHIPID() & CHIPID_MANUFACTURE) {
851         case 0xca:
852                 vendor = "Analog Devices";
853                 break;
854         default:
855                 vendor = "unknown";
856                 break;
857         }
858
859         seq_printf(m, "processor\t: %d\n"
860                 "vendor_id\t: %s\n"
861                 "cpu family\t: 0x%x\n"
862                 "model name\t: ADSP-%s %lu(MHz CCLK) %lu(MHz SCLK)\n"
863                 "stepping\t: %d\n",
864                 0,
865                 vendor,
866                 (bfin_read_CHIPID() & CHIPID_FAMILY),
867                 cpu, cclk/1000000, sclk/1000000,
868                 revid);
869
870         seq_printf(m, "cpu MHz\t\t: %lu.%03lu/%lu.%03lu\n",
871                 cclk/1000000, cclk%1000000,
872                 sclk/1000000, sclk%1000000);
873         seq_printf(m, "bogomips\t: %lu.%02lu\n"
874                 "Calibration\t: %lu loops\n",
875                 (loops_per_jiffy * HZ) / 500000,
876                 ((loops_per_jiffy * HZ) / 5000) % 100,
877                 (loops_per_jiffy * HZ));
878
879         /* Check Cache configutation */
880         switch (bfin_read_DMEM_CONTROL() & (1 << DMC0_P | 1 << DMC1_P)) {
881         case ACACHE_BSRAM:
882                 cache = "dbank-A/B\t: cache/sram";
883                 dcache_size = 16;
884                 dsup_banks = 1;
885                 break;
886         case ACACHE_BCACHE:
887                 cache = "dbank-A/B\t: cache/cache";
888                 dcache_size = 32;
889                 dsup_banks = 2;
890                 break;
891         case ASRAM_BSRAM:
892                 cache = "dbank-A/B\t: sram/sram";
893                 dcache_size = 0;
894                 dsup_banks = 0;
895                 break;
896         default:
897                 cache = "unknown";
898                 dcache_size = 0;
899                 dsup_banks = 0;
900                 break;
901         }
902
903         /* Is it turned on? */
904         if (!((bfin_read_DMEM_CONTROL()) & (ENDCPLB | DMC_ENABLE)))
905                 dcache_size = 0;
906
907         seq_printf(m, "cache size\t: %d KB(L1 icache) "
908                 "%d KB(L1 dcache-%s) %d KB(L2 cache)\n",
909                 BFIN_ICACHESIZE / 1024, dcache_size,
910 #if defined CONFIG_BFIN_WB
911                 "wb"
912 #elif defined CONFIG_BFIN_WT
913                 "wt"
914 #endif
915                 "", 0);
916
917         seq_printf(m, "%s\n", cache);
918
919         seq_printf(m, "icache setup\t: %d Sub-banks/%d Ways, %d Lines/Way\n",
920                    BFIN_ISUBBANKS, BFIN_IWAYS, BFIN_ILINES);
921         seq_printf(m,
922                    "dcache setup\t: %d Super-banks/%d Sub-banks/%d Ways, %d Lines/Way\n",
923                    dsup_banks, BFIN_DSUBBANKS, BFIN_DWAYS,
924                    BFIN_DLINES);
925 #ifdef CONFIG_BFIN_ICACHE_LOCK
926         switch (read_iloc()) {
927         case WAY0_L:
928                 seq_printf(m, "Way0 Locked-Down\n");
929                 break;
930         case WAY1_L:
931                 seq_printf(m, "Way1 Locked-Down\n");
932                 break;
933         case WAY01_L:
934                 seq_printf(m, "Way0,Way1 Locked-Down\n");
935                 break;
936         case WAY2_L:
937                 seq_printf(m, "Way2 Locked-Down\n");
938                 break;
939         case WAY02_L:
940                 seq_printf(m, "Way0,Way2 Locked-Down\n");
941                 break;
942         case WAY12_L:
943                 seq_printf(m, "Way1,Way2 Locked-Down\n");
944                 break;
945         case WAY012_L:
946                 seq_printf(m, "Way0,Way1 & Way2 Locked-Down\n");
947                 break;
948         case WAY3_L:
949                 seq_printf(m, "Way3 Locked-Down\n");
950                 break;
951         case WAY03_L:
952                 seq_printf(m, "Way0,Way3 Locked-Down\n");
953                 break;
954         case WAY13_L:
955                 seq_printf(m, "Way1,Way3 Locked-Down\n");
956                 break;
957         case WAY013_L:
958                 seq_printf(m, "Way 0,Way1,Way3 Locked-Down\n");
959                 break;
960         case WAY32_L:
961                 seq_printf(m, "Way3,Way2 Locked-Down\n");
962                 break;
963         case WAY320_L:
964                 seq_printf(m, "Way3,Way2,Way0 Locked-Down\n");
965                 break;
966         case WAY321_L:
967                 seq_printf(m, "Way3,Way2,Way1 Locked-Down\n");
968                 break;
969         case WAYALL_L:
970                 seq_printf(m, "All Ways are locked\n");
971                 break;
972         default:
973                 seq_printf(m, "No Ways are locked\n");
974         }
975 #endif
976
977         seq_printf(m, "board name\t: %s\n", bfin_board_name);
978         seq_printf(m, "board memory\t: %ld kB (0x%p -> 0x%p)\n",
979                  physical_mem_end >> 10, (void *)0, (void *)physical_mem_end);
980         seq_printf(m, "kernel memory\t: %d kB (0x%p -> 0x%p)\n",
981                 ((int)memory_end - (int)_stext) >> 10,
982                 _stext,
983                 (void *)memory_end);
984
985         return 0;
986 }
987
988 static void *c_start(struct seq_file *m, loff_t *pos)
989 {
990         return *pos < NR_CPUS ? ((void *)0x12345678) : NULL;
991 }
992
993 static void *c_next(struct seq_file *m, void *v, loff_t *pos)
994 {
995         ++*pos;
996         return c_start(m, pos);
997 }
998
999 static void c_stop(struct seq_file *m, void *v)
1000 {
1001 }
1002
1003 const struct seq_operations cpuinfo_op = {
1004         .start = c_start,
1005         .next = c_next,
1006         .stop = c_stop,
1007         .show = show_cpuinfo,
1008 };
1009
1010 void __init cmdline_init(const char *r0)
1011 {
1012         if (r0)
1013                 strncpy(command_line, r0, COMMAND_LINE_SIZE);
1014 }