git.oblomov.eu Git - linux-2.6/blob - drivers/mfd/ab3100-core.c

   1 /*
   2  * Copyright (C) 2007-2009 ST-Ericsson
   3  * License terms: GNU General Public License (GPL) version 2
   4  * Low-level core for exclusive access to the AB3100 IC on the I2C bus
   5  * and some basic chip-configuration.
   6  * Author: Linus Walleij <linus.walleij@stericsson.com>
   7  */
   8
   9 #include <linux/i2c.h>
  10 #include <linux/mutex.h>
  11 #include <linux/list.h>
  12 #include <linux/notifier.h>
  13 #include <linux/err.h>
  14 #include <linux/platform_device.h>
  15 #include <linux/device.h>
  16 #include <linux/interrupt.h>
  17 #include <linux/workqueue.h>
  18 #include <linux/debugfs.h>
  19 #include <linux/seq_file.h>
  20 #include <linux/uaccess.h>
  21 #include <linux/mfd/ab3100.h>
  22
  23 /* These are the only registers inside AB3100 used in this main file */
  24
  25 /* Interrupt event registers */
  26 #define AB3100_EVENTA1          0x21
  27 #define AB3100_EVENTA2          0x22
  28 #define AB3100_EVENTA3          0x23
  29
  30 /* AB3100 DAC converter registers */
  31 #define AB3100_DIS              0x00
  32 #define AB3100_D0C              0x01
  33 #define AB3100_D1C              0x02
  34 #define AB3100_D2C              0x03
  35 #define AB3100_D3C              0x04
  36
  37 /* Chip ID register */
  38 #define AB3100_CID              0x20
  39
  40 /* AB3100 interrupt registers */
  41 #define AB3100_IMRA1            0x24
  42 #define AB3100_IMRA2            0x25
  43 #define AB3100_IMRA3            0x26
  44 #define AB3100_IMRB1            0x2B
  45 #define AB3100_IMRB2            0x2C
  46 #define AB3100_IMRB3            0x2D
  47
  48 /* System Power Monitoring and control registers */
  49 #define AB3100_MCA              0x2E
  50 #define AB3100_MCB              0x2F
  51
  52 /* SIM power up */
  53 #define AB3100_SUP              0x50
  54
  55 /*
  56  * I2C communication
  57  *
  58  * The AB3100 is usually assigned address 0x48 (7-bit)
  59  * The chip is defined in the platform i2c_board_data section.
  60  */
  61 static unsigned short normal_i2c[] = { 0x48, I2C_CLIENT_END };
  62 I2C_CLIENT_INSMOD_1(ab3100);
  63
  64 u8 ab3100_get_chip_type(struct ab3100 *ab3100)
  65 {
  66         u8 chip = ABUNKNOWN;
  67
  68         switch (ab3100->chip_id & 0xf0) {
  69         case  0xa0:
  70                 chip = AB3000;
  71                 break;
  72         case  0xc0:
  73                 chip = AB3100;
  74                 break;
  75         }
  76         return chip;
  77 }
  78 EXPORT_SYMBOL(ab3100_get_chip_type);
  79
  80 int ab3100_set_register(struct ab3100 *ab3100, u8 reg, u8 regval)
  81 {
  82         u8 regandval[2] = {reg, regval};
  83         int err;
  84
  85         err = mutex_lock_interruptible(&ab3100->access_mutex);
  86         if (err)
  87                 return err;
  88
  89         /*
  90          * A two-byte write message with the first byte containing the register
  91          * number and the second byte containing the value to be written
  92          * effectively sets a register in the AB3100.
  93          */
  94         err = i2c_master_send(ab3100->i2c_client, regandval, 2);
  95         if (err < 0) {
  96                 dev_err(ab3100->dev,
  97                         "write error (write register): %d\n",
  98                         err);
  99         } else if (err != 2) {
 100                 dev_err(ab3100->dev,
 101                         "write error (write register) "
 102                         "%d bytes transferred (expected 2)\n",
 103                         err);
 104                 err = -EIO;
 105         } else {
 106                 /* All is well */
 107                 err = 0;
 108         }
 109         mutex_unlock(&ab3100->access_mutex);
 110         return 0;
 111 }
 112 EXPORT_SYMBOL(ab3100_set_register);
 113
 114 /*
 115  * The test registers exist at an I2C bus address up one
 116  * from the ordinary base. They are not supposed to be used
 117  * in production code, but sometimes you have to do that
 118  * anyway. It's currently only used from this file so declare
 119  * it static and do not export.
 120  */
 121 static int ab3100_set_test_register(struct ab3100 *ab3100,
 122                                     u8 reg, u8 regval)
 123 {
 124         u8 regandval[2] = {reg, regval};
 125         int err;
 126
 127         err = mutex_lock_interruptible(&ab3100->access_mutex);
 128         if (err)
 129                 return err;
 130
 131         err = i2c_master_send(ab3100->testreg_client, regandval, 2);
 132         if (err < 0) {
 133                 dev_err(ab3100->dev,
 134                         "write error (write test register): %d\n",
 135                         err);
 136         } else if (err != 2) {
 137                 dev_err(ab3100->dev,
 138                         "write error (write test register) "
 139                         "%d bytes transferred (expected 2)\n",
 140                         err);
 141                 err = -EIO;
 142         } else {
 143                 /* All is well */
 144                 err = 0;
 145         }
 146         mutex_unlock(&ab3100->access_mutex);
 147
 148         return err;
 149 }
 150
 151 int ab3100_get_register(struct ab3100 *ab3100, u8 reg, u8 *regval)
 152 {
 153         int err;
 154
 155         err = mutex_lock_interruptible(&ab3100->access_mutex);
 156         if (err)
 157                 return err;
 158
 159         /*
 160          * AB3100 require an I2C "stop" command between each message, else
 161          * it will not work. The only way of achieveing this with the
 162          * message transport layer is to send the read and write messages
 163          * separately.
 164          */
 165         err = i2c_master_send(ab3100->i2c_client, &reg, 1);
 166         if (err < 0) {
 167                 dev_err(ab3100->dev,
 168                         "write error (send register address): %d\n",
 169                         err);
 170                 goto get_reg_out_unlock;
 171         } else if (err != 1) {
 172                 dev_err(ab3100->dev,
 173                         "write error (send register address) "
 174                         "%d bytes transferred (expected 1)\n",
 175                         err);
 176                 err = -EIO;
 177                 goto get_reg_out_unlock;
 178         } else {
 179                 /* All is well */
 180                 err = 0;
 181         }
 182
 183         err = i2c_master_recv(ab3100->i2c_client, regval, 1);
 184         if (err < 0) {
 185                 dev_err(ab3100->dev,
 186                         "write error (read register): %d\n",
 187                         err);
 188                 goto get_reg_out_unlock;
 189         } else if (err != 1) {
 190                 dev_err(ab3100->dev,
 191                         "write error (read register) "
 192                         "%d bytes transferred (expected 1)\n",
 193                         err);
 194                 err = -EIO;
 195                 goto get_reg_out_unlock;
 196         } else {
 197                 /* All is well */
 198                 err = 0;
 199         }
 200
 201  get_reg_out_unlock:
 202         mutex_unlock(&ab3100->access_mutex);
 203         return err;
 204 }
 205 EXPORT_SYMBOL(ab3100_get_register);
 206
 207 int ab3100_get_register_page(struct ab3100 *ab3100,
 208                              u8 first_reg, u8 *regvals, u8 numregs)
 209 {
 210         int err;
 211
 212         if (ab3100->chip_id == 0xa0 ||
 213             ab3100->chip_id == 0xa1)
 214                 /* These don't support paged reads */
 215                 return -EIO;
 216
 217         err = mutex_lock_interruptible(&ab3100->access_mutex);
 218         if (err)
 219                 return err;
 220
 221         /*
 222          * Paged read also require an I2C "stop" command.
 223          */
 224         err = i2c_master_send(ab3100->i2c_client, &first_reg, 1);
 225         if (err < 0) {
 226                 dev_err(ab3100->dev,
 227                         "write error (send first register address): %d\n",
 228                         err);
 229                 goto get_reg_page_out_unlock;
 230         } else if (err != 1) {
 231                 dev_err(ab3100->dev,
 232                         "write error (send first register address) "
 233                         "%d bytes transferred (expected 1)\n",
 234                         err);
 235                 err = -EIO;
 236                 goto get_reg_page_out_unlock;
 237         }
 238
 239         err = i2c_master_recv(ab3100->i2c_client, regvals, numregs);
 240         if (err < 0) {
 241                 dev_err(ab3100->dev,
 242                         "write error (read register page): %d\n",
 243                         err);
 244                 goto get_reg_page_out_unlock;
 245         } else if (err != numregs) {
 246                 dev_err(ab3100->dev,
 247                         "write error (read register page) "
 248                         "%d bytes transferred (expected %d)\n",
 249                         err, numregs);
 250                 err = -EIO;
 251                 goto get_reg_page_out_unlock;
 252         }
 253
 254         /* All is well */
 255         err = 0;
 256
 257  get_reg_page_out_unlock:
 258         mutex_unlock(&ab3100->access_mutex);
 259         return err;
 260 }
 261 EXPORT_SYMBOL(ab3100_get_register_page);
 262
 263 int ab3100_mask_and_set_register(struct ab3100 *ab3100,
 264                                  u8 reg, u8 andmask, u8 ormask)
 265 {
 266         u8 regandval[2] = {reg, 0};
 267         int err;
 268
 269         err = mutex_lock_interruptible(&ab3100->access_mutex);
 270         if (err)
 271                 return err;
 272
 273         /* First read out the target register */
 274         err = i2c_master_send(ab3100->i2c_client, &reg, 1);
 275         if (err < 0) {
 276                 dev_err(ab3100->dev,
 277                         "write error (maskset send address): %d\n",
 278                         err);
 279                 goto get_maskset_unlock;
 280         } else if (err != 1) {
 281                 dev_err(ab3100->dev,
 282                         "write error (maskset send address) "
 283                         "%d bytes transferred (expected 1)\n",
 284                         err);
 285                 err = -EIO;
 286                 goto get_maskset_unlock;
 287         }
 288
 289         err = i2c_master_recv(ab3100->i2c_client, &regandval[1], 1);
 290         if (err < 0) {
 291                 dev_err(ab3100->dev,
 292                         "write error (maskset read register): %d\n",
 293                         err);
 294                 goto get_maskset_unlock;
 295         } else if (err != 1) {
 296                 dev_err(ab3100->dev,
 297                         "write error (maskset read register) "
 298                         "%d bytes transferred (expected 1)\n",
 299                         err);
 300                 err = -EIO;
 301                 goto get_maskset_unlock;
 302         }
 303
 304         /* Modify the register */
 305         regandval[1] &= andmask;
 306         regandval[1] |= ormask;
 307
 308         /* Write the register */
 309         err = i2c_master_send(ab3100->i2c_client, regandval, 2);
 310         if (err < 0) {
 311                 dev_err(ab3100->dev,
 312                         "write error (write register): %d\n",
 313                         err);
 314                 goto get_maskset_unlock;
 315         } else if (err != 2) {
 316                 dev_err(ab3100->dev,
 317                         "write error (write register) "
 318                         "%d bytes transferred (expected 2)\n",
 319                         err);
 320                 err = -EIO;
 321                 goto get_maskset_unlock;
 322         }
 323
 324         /* All is well */
 325         err = 0;
 326
 327  get_maskset_unlock:
 328         mutex_unlock(&ab3100->access_mutex);
 329         return err;
 330 }
 331 EXPORT_SYMBOL(ab3100_mask_and_set_register);
 332
 333 /*
 334  * Register a simple callback for handling any AB3100 events.
 335  */
 336 int ab3100_event_register(struct ab3100 *ab3100,
 337                           struct notifier_block *nb)
 338 {
 339         return blocking_notifier_chain_register(&ab3100->event_subscribers,
 340                                                nb);
 341 }
 342 EXPORT_SYMBOL(ab3100_event_register);
 343
 344 /*
 345  * Remove a previously registered callback.
 346  */
 347 int ab3100_event_unregister(struct ab3100 *ab3100,
 348                             struct notifier_block *nb)
 349 {
 350   return blocking_notifier_chain_unregister(&ab3100->event_subscribers,
 351                                             nb);
 352 }
 353 EXPORT_SYMBOL(ab3100_event_unregister);
 354
 355
 356 int ab3100_event_registers_startup_state_get(struct ab3100 *ab3100,
 357                                              u32 *fatevent)
 358 {
 359         if (!ab3100->startup_events_read)
 360                 return -EAGAIN; /* Try again later */
 361         *fatevent = ab3100->startup_events;
 362         return 0;
 363 }
 364 EXPORT_SYMBOL(ab3100_event_registers_startup_state_get);
 365
 366 /* Interrupt handling worker */
 367 static void ab3100_work(struct work_struct *work)
 368 {
 369         struct ab3100 *ab3100 = container_of(work, struct ab3100, work);
 370         u8 event_regs[3];
 371         u32 fatevent;
 372         int err;
 373
 374         err = ab3100_get_register_page(ab3100, AB3100_EVENTA1,
 375                                        event_regs, 3);
 376         if (err)
 377                 goto err_event_wq;
 378
 379         fatevent = (event_regs[0] << 16) |
 380                 (event_regs[1] << 8) |
 381                 event_regs[2];
 382
 383         if (!ab3100->startup_events_read) {
 384                 ab3100->startup_events = fatevent;
 385                 ab3100->startup_events_read = true;
 386         }
 387         /*
 388          * The notified parties will have to mask out the events
 389          * they're interested in and react to them. They will be
 390          * notified on all events, then they use the fatevent value
 391          * to determine if they're interested.
 392          */
 393         blocking_notifier_call_chain(&ab3100->event_subscribers,
 394                                      fatevent, NULL);
 395
 396         dev_dbg(ab3100->dev,
 397                 "IRQ Event: 0x%08x\n", fatevent);
 398
 399         /* By now the IRQ should be acked and deasserted so enable it again */
 400         enable_irq(ab3100->i2c_client->irq);
 401         return;
 402
 403  err_event_wq:
 404         dev_dbg(ab3100->dev,
 405                 "error in event workqueue\n");
 406         /* Enable the IRQ anyway, what choice do we have? */
 407         enable_irq(ab3100->i2c_client->irq);
 408         return;
 409 }
 410
 411 static irqreturn_t ab3100_irq_handler(int irq, void *data)
 412 {
 413         struct ab3100 *ab3100 = data;
 414         /*
 415          * Disable the IRQ and dispatch a worker to handle the
 416          * event. Since the chip resides on I2C this is slow
 417          * stuff and we will re-enable the interrupts once th
 418          * worker has finished.
 419          */
 420         disable_irq(ab3100->i2c_client->irq);
 421         schedule_work(&ab3100->work);
 422         return IRQ_HANDLED;
 423 }
 424
 425 #ifdef CONFIG_DEBUG_FS
 426 /*
 427  * Some debugfs entries only exposed if we're using debug
 428  */
 429 static int ab3100_registers_print(struct seq_file *s, void *p)
 430 {
 431         struct ab3100 *ab3100 = s->private;
 432         u8 value;
 433         u8 reg;
 434
 435         seq_printf(s, "AB3100 registers:\n");
 436
 437         for (reg = 0; reg < 0xff; reg++) {
 438                 ab3100_get_register(ab3100, reg, &value);
 439                 seq_printf(s, "[0x%x]:  0x%x\n", reg, value);
 440         }
 441         return 0;
 442 }
 443
 444 static int ab3100_registers_open(struct inode *inode, struct file *file)
 445 {
 446         return single_open(file, ab3100_registers_print, inode->i_private);
 447 }
 448
 449 static const struct file_operations ab3100_registers_fops = {
 450         .open = ab3100_registers_open,
 451         .read = seq_read,
 452         .llseek = seq_lseek,
 453         .release = single_release,
 454         .owner = THIS_MODULE,
 455 };
 456
 457 struct ab3100_get_set_reg_priv {
 458         struct ab3100 *ab3100;
 459         bool mode;
 460 };
 461
 462 static int ab3100_get_set_reg_open_file(struct inode *inode, struct file *file)
 463 {
 464         file->private_data = inode->i_private;
 465         return 0;
 466 }
 467
 468 static int ab3100_get_set_reg(struct file *file,
 469                               const char __user *user_buf,
 470                               size_t count, loff_t *ppos)
 471 {
 472         struct ab3100_get_set_reg_priv *priv = file->private_data;
 473         struct ab3100 *ab3100 = priv->ab3100;
 474         char buf[32];
 475         int buf_size;
 476         int regp;
 477         unsigned long user_reg;
 478         int err;
 479         int i = 0;
 480
 481         /* Get userspace string and assure termination */
 482         buf_size = min(count, (sizeof(buf)-1));
 483         if (copy_from_user(buf, user_buf, buf_size))
 484                 return -EFAULT;
 485         buf[buf_size] = 0;
 486
 487         /*
 488          * The idea is here to parse a string which is either
 489          * "0xnn" for reading a register, or "0xaa 0xbb" for
 490          * writing 0xbb to the register 0xaa. First move past
 491          * whitespace and then begin to parse the register.
 492          */
 493         while ((i < buf_size) && (buf[i] == ' '))
 494                 i++;
 495         regp = i;
 496
 497         /*
 498          * Advance pointer to end of string then terminate
 499          * the register string. This is needed to satisfy
 500          * the strict_strtoul() function.
 501          */
 502         while ((i < buf_size) && (buf[i] != ' '))
 503                 i++;
 504         buf[i] = '\0';
 505
 506         err = strict_strtoul(&buf[regp], 16, &user_reg);
 507         if (err)
 508                 return err;
 509         if (user_reg > 0xff)
 510                 return -EINVAL;
 511
 512         /* Either we read or we write a register here */
 513         if (!priv->mode) {
 514                 /* Reading */
 515                 u8 reg = (u8) user_reg;
 516                 u8 regvalue;
 517
 518                 ab3100_get_register(ab3100, reg, &regvalue);
 519
 520                 dev_info(ab3100->dev,
 521                          "debug read AB3100 reg[0x%02x]: 0x%02x\n",
 522                          reg, regvalue);
 523         } else {
 524                 int valp;
 525                 unsigned long user_value;
 526                 u8 reg = (u8) user_reg;
 527                 u8 value;
 528                 u8 regvalue;
 529
 530                 /*
 531                  * Writing, we need some value to write to
 532                  * the register so keep parsing the string
 533                  * from userspace.
 534                  */
 535                 i++;
 536                 while ((i < buf_size) && (buf[i] == ' '))
 537                         i++;
 538                 valp = i;
 539                 while ((i < buf_size) && (buf[i] != ' '))
 540                         i++;
 541                 buf[i] = '\0';
 542
 543                 err = strict_strtoul(&buf[valp], 16, &user_value);
 544                 if (err)
 545                         return err;
 546                 if (user_reg > 0xff)
 547                         return -EINVAL;
 548
 549                 value = (u8) user_value;
 550                 ab3100_set_register(ab3100, reg, value);
 551                 ab3100_get_register(ab3100, reg, &regvalue);
 552
 553                 dev_info(ab3100->dev,
 554                          "debug write reg[0x%02x] with 0x%02x, "
 555                          "after readback: 0x%02x\n",
 556                          reg, value, regvalue);
 557         }
 558         return buf_size;
 559 }
 560
 561 static const struct file_operations ab3100_get_set_reg_fops = {
 562         .open = ab3100_get_set_reg_open_file,
 563         .write = ab3100_get_set_reg,
 564 };
 565
 566 static struct dentry *ab3100_dir;
 567 static struct dentry *ab3100_reg_file;
 568 static struct ab3100_get_set_reg_priv ab3100_get_priv;
 569 static struct dentry *ab3100_get_reg_file;
 570 static struct ab3100_get_set_reg_priv ab3100_set_priv;
 571 static struct dentry *ab3100_set_reg_file;
 572
 573 static void ab3100_setup_debugfs(struct ab3100 *ab3100)
 574 {
 575         int err;
 576
 577         ab3100_dir = debugfs_create_dir("ab3100", NULL);
 578         if (!ab3100_dir)
 579                 goto exit_no_debugfs;
 580
 581         ab3100_reg_file = debugfs_create_file("registers",
 582                                 S_IRUGO, ab3100_dir, ab3100,
 583                                 &ab3100_registers_fops);
 584         if (!ab3100_reg_file) {
 585                 err = -ENOMEM;
 586                 goto exit_destroy_dir;
 587         }
 588
 589         ab3100_get_priv.ab3100 = ab3100;
 590         ab3100_get_priv.mode = false;
 591         ab3100_get_reg_file = debugfs_create_file("get_reg",
 592                                 S_IWUGO, ab3100_dir, &ab3100_get_priv,
 593                                 &ab3100_get_set_reg_fops);
 594         if (!ab3100_get_reg_file) {
 595                 err = -ENOMEM;
 596                 goto exit_destroy_reg;
 597         }
 598
 599         ab3100_set_priv.ab3100 = ab3100;
 600         ab3100_set_priv.mode = true;
 601         ab3100_set_reg_file = debugfs_create_file("set_reg",
 602                                 S_IWUGO, ab3100_dir, &ab3100_set_priv,
 603                                 &ab3100_get_set_reg_fops);
 604         if (!ab3100_set_reg_file) {
 605                 err = -ENOMEM;
 606                 goto exit_destroy_get_reg;
 607         }
 608         return;
 609
 610  exit_destroy_get_reg:
 611         debugfs_remove(ab3100_get_reg_file);
 612  exit_destroy_reg:
 613         debugfs_remove(ab3100_reg_file);
 614  exit_destroy_dir:
 615         debugfs_remove(ab3100_dir);
 616  exit_no_debugfs:
 617         return;
 618 }
 619 static inline void ab3100_remove_debugfs(void)
 620 {
 621         debugfs_remove(ab3100_set_reg_file);
 622         debugfs_remove(ab3100_get_reg_file);
 623         debugfs_remove(ab3100_reg_file);
 624         debugfs_remove(ab3100_dir);
 625 }
 626 #else
 627 static inline void ab3100_setup_debugfs(struct ab3100 *ab3100)
 628 {
 629 }
 630 static inline void ab3100_remove_debugfs(void)
 631 {
 632 }
 633 #endif
 634
 635 /*
 636  * Basic set-up, datastructure creation/destruction and I2C interface.
 637  * This sets up a default config in the AB3100 chip so that it
 638  * will work as expected.
 639  */
 640
 641 struct ab3100_init_setting {
 642         u8 abreg;
 643         u8 setting;
 644 };
 645
 646 static const struct ab3100_init_setting __initdata
 647 ab3100_init_settings[] = {
 648         {
 649                 .abreg = AB3100_MCA,
 650                 .setting = 0x01
 651         }, {
 652                 .abreg = AB3100_MCB,
 653                 .setting = 0x30
 654         }, {
 655                 .abreg = AB3100_IMRA1,
 656                 .setting = 0x00
 657         }, {
 658                 .abreg = AB3100_IMRA2,
 659                 .setting = 0xFF
 660         }, {
 661                 .abreg = AB3100_IMRA3,
 662                 .setting = 0x01
 663         }, {
 664                 .abreg = AB3100_IMRB1,
 665                 .setting = 0xFF
 666         }, {
 667                 .abreg = AB3100_IMRB2,
 668                 .setting = 0xFF
 669         }, {
 670                 .abreg = AB3100_IMRB3,
 671                 .setting = 0xFF
 672         }, {
 673                 .abreg = AB3100_SUP,
 674                 .setting = 0x00
 675         }, {
 676                 .abreg = AB3100_DIS,
 677                 .setting = 0xF0
 678         }, {
 679                 .abreg = AB3100_D0C,
 680                 .setting = 0x00
 681         }, {
 682                 .abreg = AB3100_D1C,
 683                 .setting = 0x00
 684         }, {
 685                 .abreg = AB3100_D2C,
 686                 .setting = 0x00
 687         }, {
 688                 .abreg = AB3100_D3C,
 689                 .setting = 0x00
 690         },
 691 };
 692
 693 static int __init ab3100_setup(struct ab3100 *ab3100)
 694 {
 695         int err = 0;
 696         int i;
 697
 698         for (i = 0; i < ARRAY_SIZE(ab3100_init_settings); i++) {
 699                 err = ab3100_set_register(ab3100,
 700                                           ab3100_init_settings[i].abreg,
 701                                           ab3100_init_settings[i].setting);
 702                 if (err)
 703                         goto exit_no_setup;
 704         }
 705
 706         /*
 707          * Special trick to make the AB3100 use the 32kHz clock (RTC)
 708          * bit 3 in test registe 0x02 is a special, undocumented test
 709          * register bit that only exist in AB3100 P1E
 710          */
 711         if (ab3100->chip_id == 0xc4) {
 712                 dev_warn(ab3100->dev,
 713                          "AB3100 P1E variant detected, "
 714                          "forcing chip to 32KHz\n");
 715                 err = ab3100_set_test_register(ab3100, 0x02, 0x08);
 716         }
 717
 718  exit_no_setup:
 719         return err;
 720 }
 721
 722 /*
 723  * Here we define all the platform devices that appear
 724  * as children of the AB3100. These are regular platform
 725  * devices with the IORESOURCE_IO .start and .end set
 726  * to correspond to the internal AB3100 register range
 727  * mapping to the corresponding subdevice.
 728  */
 729
 730 #define AB3100_DEVICE(devname, devid)                           \
 731 static struct platform_device ab3100_##devname##_device = {     \
 732         .name           = devid,                                \
 733         .id             = -1,                                   \
 734 }
 735
 736 /*
 737  * This lists all the subdevices and corresponding register
 738  * ranges.
 739  */
 740 AB3100_DEVICE(dac, "ab3100-dac");
 741 AB3100_DEVICE(leds, "ab3100-leds");
 742 AB3100_DEVICE(power, "ab3100-power");
 743 AB3100_DEVICE(regulators, "ab3100-regulators");
 744 AB3100_DEVICE(sim, "ab3100-sim");
 745 AB3100_DEVICE(uart, "ab3100-uart");
 746 AB3100_DEVICE(rtc, "ab3100-rtc");
 747 AB3100_DEVICE(charger, "ab3100-charger");
 748 AB3100_DEVICE(boost, "ab3100-boost");
 749 AB3100_DEVICE(adc, "ab3100-adc");
 750 AB3100_DEVICE(fuelgauge, "ab3100-fuelgauge");
 751 AB3100_DEVICE(vibrator, "ab3100-vibrator");
 752 AB3100_DEVICE(otp, "ab3100-otp");
 753 AB3100_DEVICE(codec, "ab3100-codec");
 754
 755 static struct platform_device *
 756 ab3100_platform_devs[] = {
 757         &ab3100_dac_device,
 758         &ab3100_leds_device,
 759         &ab3100_power_device,
 760         &ab3100_regulators_device,
 761         &ab3100_sim_device,
 762         &ab3100_uart_device,
 763         &ab3100_rtc_device,
 764         &ab3100_charger_device,
 765         &ab3100_boost_device,
 766         &ab3100_adc_device,
 767         &ab3100_fuelgauge_device,
 768         &ab3100_vibrator_device,
 769         &ab3100_otp_device,
 770         &ab3100_codec_device,
 771 };
 772
 773 struct ab_family_id {
 774         u8      id;
 775         char    *name;
 776 };
 777
 778 static const struct ab_family_id ids[] __initdata = {
 779         /* AB3100 */
 780         {
 781                 .id = 0xc0,
 782                 .name = "P1A"
 783         }, {
 784                 .id = 0xc1,
 785                 .name = "P1B"
 786         }, {
 787                 .id = 0xc2,
 788                 .name = "P1C"
 789         }, {
 790                 .id = 0xc3,
 791                 .name = "P1D"
 792         }, {
 793                 .id = 0xc4,
 794                 .name = "P1E"
 795         }, {
 796                 .id = 0xc5,
 797                 .name = "P1F/R1A"
 798         }, {
 799                 .id = 0xc6,
 800                 .name = "P1G/R1A"
 801         }, {
 802                 .id = 0xc7,
 803                 .name = "P2A/R2A"
 804         }, {
 805                 .id = 0xc8,
 806                 .name = "P2B/R2B"
 807         },
 808         /* AB3000 variants, not supported */
 809         {
 810                 .id = 0xa0
 811         }, {
 812                 .id = 0xa1
 813         }, {
 814                 .id = 0xa2
 815         }, {
 816                 .id = 0xa3
 817         }, {
 818                 .id = 0xa4
 819         }, {
 820                 .id = 0xa5
 821         }, {
 822                 .id = 0xa6
 823         }, {
 824                 .id = 0xa7
 825         },
 826         /* Terminator */
 827         {
 828                 .id = 0x00,
 829         },
 830 };
 831
 832 static int __init ab3100_probe(struct i2c_client *client,
 833                         const struct i2c_device_id *id)
 834 {
 835         struct ab3100 *ab3100;
 836         int err;
 837         int i;
 838
 839         ab3100 = kzalloc(sizeof(struct ab3100), GFP_KERNEL);
 840         if (!ab3100) {
 841                 dev_err(&client->dev, "could not allocate AB3100 device\n");
 842                 return -ENOMEM;
 843         }
 844
 845         /* Initialize data structure */
 846         mutex_init(&ab3100->access_mutex);
 847         BLOCKING_INIT_NOTIFIER_HEAD(&ab3100->event_subscribers);
 848
 849         ab3100->i2c_client = client;
 850         ab3100->dev = &ab3100->i2c_client->dev;
 851
 852         i2c_set_clientdata(client, ab3100);
 853
 854         /* Read chip ID register */
 855         err = ab3100_get_register(ab3100, AB3100_CID,
 856                                   &ab3100->chip_id);
 857         if (err) {
 858                 dev_err(&client->dev,
 859                         "could not communicate with the AB3100 analog "
 860                         "baseband chip\n");
 861                 goto exit_no_detect;
 862         }
 863
 864         for (i = 0; ids[i].id != 0x0; i++) {
 865                 if (ids[i].id == ab3100->chip_id) {
 866                         if (ids[i].name != NULL) {
 867                                 snprintf(&ab3100->chip_name[0],
 868                                          sizeof(ab3100->chip_name) - 1,
 869                                          "AB3100 %s",
 870                                          ids[i].name);
 871                                 break;
 872                         } else {
 873                                 dev_err(&client->dev,
 874                                         "AB3000 is not supported\n");
 875                                 goto exit_no_detect;
 876                         }
 877                 }
 878         }
 879
 880         if (ids[i].id == 0x0) {
 881                 dev_err(&client->dev, "unknown analog baseband chip id: 0x%x\n",
 882                         ab3100->chip_id);
 883                 dev_err(&client->dev, "accepting it anyway. Please update "
 884                         "the driver.\n");
 885                 goto exit_no_detect;
 886         }
 887
 888         dev_info(&client->dev, "Detected chip: %s\n",
 889                  &ab3100->chip_name[0]);
 890
 891         /* Attach a second dummy i2c_client to the test register address */
 892         ab3100->testreg_client = i2c_new_dummy(client->adapter,
 893                                                      client->addr + 1);
 894         if (!ab3100->testreg_client) {
 895                 err = -ENOMEM;
 896                 goto exit_no_testreg_client;
 897         }
 898
 899         strlcpy(ab3100->testreg_client->name, id->name,
 900                 sizeof(ab3100->testreg_client->name));
 901
 902         err = ab3100_setup(ab3100);
 903         if (err)
 904                 goto exit_no_setup;
 905
 906         INIT_WORK(&ab3100->work, ab3100_work);
 907
 908         /* This real unpredictable IRQ is of course sampled for entropy */
 909         err = request_irq(client->irq, ab3100_irq_handler,
 910                           IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
 911                           "AB3100 IRQ", ab3100);
 912         if (err)
 913                 goto exit_no_irq;
 914
 915         /* Set parent and a pointer back to the container in device data */
 916         for (i = 0; i < ARRAY_SIZE(ab3100_platform_devs); i++) {
 917                 ab3100_platform_devs[i]->dev.parent =
 918                         &client->dev;
 919                 platform_set_drvdata(ab3100_platform_devs[i], ab3100);
 920         }
 921
 922         /* Register the platform devices */
 923         platform_add_devices(ab3100_platform_devs,
 924                              ARRAY_SIZE(ab3100_platform_devs));
 925
 926         ab3100_setup_debugfs(ab3100);
 927
 928         return 0;
 929
 930  exit_no_irq:
 931  exit_no_setup:
 932         i2c_unregister_device(ab3100->testreg_client);
 933  exit_no_testreg_client:
 934  exit_no_detect:
 935         kfree(ab3100);
 936         return err;
 937 }
 938
 939 static int __exit ab3100_remove(struct i2c_client *client)
 940 {
 941         struct ab3100 *ab3100 = i2c_get_clientdata(client);
 942         int i;
 943
 944         /* Unregister subdevices */
 945         for (i = 0; i < ARRAY_SIZE(ab3100_platform_devs); i++)
 946                 platform_device_unregister(ab3100_platform_devs[i]);
 947
 948         ab3100_remove_debugfs();
 949         i2c_unregister_device(ab3100->testreg_client);
 950
 951         /*
 952          * At this point, all subscribers should have unregistered
 953          * their notifiers so deactivate IRQ
 954          */
 955         free_irq(client->irq, ab3100);
 956         kfree(ab3100);
 957         return 0;
 958 }
 959
 960 static const struct i2c_device_id ab3100_id[] = {
 961         { "ab3100", ab3100 },
 962         { }
 963 };
 964 MODULE_DEVICE_TABLE(i2c, ab3100_id);
 965
 966 static struct i2c_driver ab3100_driver = {
 967         .driver = {
 968                 .name   = "ab3100",
 969                 .owner  = THIS_MODULE,
 970         },
 971         .id_table       = ab3100_id,
 972         .probe          = ab3100_probe,
 973         .remove         = __exit_p(ab3100_remove),
 974 };
 975
 976 static int __init ab3100_i2c_init(void)
 977 {
 978         return i2c_add_driver(&ab3100_driver);
 979 }
 980
 981 static void __exit ab3100_i2c_exit(void)
 982 {
 983         i2c_del_driver(&ab3100_driver);
 984 }
 985
 986 subsys_initcall(ab3100_i2c_init);
 987 module_exit(ab3100_i2c_exit);
 988
 989 MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
 990 MODULE_DESCRIPTION("AB3100 core driver");
 991 MODULE_LICENSE("GPL");