git.oblomov.eu Git - linux-2.6/blob - drivers/net/irda/smsc-ircc2.c

   1 /*********************************************************************
   2  * $Id: smsc-ircc2.c,v 1.19.2.5 2002/10/27 11:34:26 dip Exp $
   3  *
   4  * Description:   Driver for the SMC Infrared Communications Controller
   5  * Status:        Experimental.
   6  * Author:        Daniele Peri (peri@csai.unipa.it)
   7  * Created at:
   8  * Modified at:
   9  * Modified by:
  10  *
  11  *     Copyright (c) 2002      Daniele Peri
  12  *     All Rights Reserved.
  13  *     Copyright (c) 2002      Jean Tourrilhes
  14  *     Copyright (c) 2006      Linus Walleij
  15  *
  16  *
  17  * Based on smc-ircc.c:
  18  *
  19  *     Copyright (c) 2001      Stefani Seibold
  20  *     Copyright (c) 1999-2001 Dag Brattli
  21  *     Copyright (c) 1998-1999 Thomas Davis,
  22  *
  23  *      and irport.c:
  24  *
  25  *     Copyright (c) 1997, 1998, 1999-2000 Dag Brattli, All Rights Reserved.
  26  *
  27  *
  28  *     This program is free software; you can redistribute it and/or
  29  *     modify it under the terms of the GNU General Public License as
  30  *     published by the Free Software Foundation; either version 2 of
  31  *     the License, or (at your option) any later version.
  32  *
  33  *     This program is distributed in the hope that it will be useful,
  34  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  35  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  36  *     GNU General Public License for more details.
  37  *
  38  *     You should have received a copy of the GNU General Public License
  39  *     along with this program; if not, write to the Free Software
  40  *     Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  41  *     MA 02111-1307 USA
  42  *
  43  ********************************************************************/
  44
  45 #include <linux/module.h>
  46 #include <linux/kernel.h>
  47 #include <linux/types.h>
  48 #include <linux/skbuff.h>
  49 #include <linux/netdevice.h>
  50 #include <linux/ioport.h>
  51 #include <linux/delay.h>
  52 #include <linux/slab.h>
  53 #include <linux/init.h>
  54 #include <linux/rtnetlink.h>
  55 #include <linux/serial_reg.h>
  56 #include <linux/dma-mapping.h>
  57 #include <linux/pnp.h>
  58 #include <linux/platform_device.h>
  59
  60 #include <asm/io.h>
  61 #include <asm/dma.h>
  62 #include <asm/byteorder.h>
  63
  64 #include <linux/spinlock.h>
  65 #include <linux/pm.h>
  66 #ifdef CONFIG_PCI
  67 #include <linux/pci.h>
  68 #endif
  69
  70 #include <net/irda/wrapper.h>
  71 #include <net/irda/irda.h>
  72 #include <net/irda/irda_device.h>
  73
  74 #include "smsc-ircc2.h"
  75 #include "smsc-sio.h"
  76
  77
  78 MODULE_AUTHOR("Daniele Peri <peri@csai.unipa.it>");
  79 MODULE_DESCRIPTION("SMC IrCC SIR/FIR controller driver");
  80 MODULE_LICENSE("GPL");
  81
  82 static int smsc_nopnp;
  83 module_param_named(nopnp, smsc_nopnp, bool, 0);
  84 MODULE_PARM_DESC(nopnp, "Do not use PNP to detect controller settings");
  85
  86 #define DMA_INVAL 255
  87 static int ircc_dma = DMA_INVAL;
  88 module_param(ircc_dma, int, 0);
  89 MODULE_PARM_DESC(ircc_dma, "DMA channel");
  90
  91 #define IRQ_INVAL 255
  92 static int ircc_irq = IRQ_INVAL;
  93 module_param(ircc_irq, int, 0);
  94 MODULE_PARM_DESC(ircc_irq, "IRQ line");
  95
  96 static int ircc_fir;
  97 module_param(ircc_fir, int, 0);
  98 MODULE_PARM_DESC(ircc_fir, "FIR Base Address");
  99
 100 static int ircc_sir;
 101 module_param(ircc_sir, int, 0);
 102 MODULE_PARM_DESC(ircc_sir, "SIR Base Address");
 103
 104 static int ircc_cfg;
 105 module_param(ircc_cfg, int, 0);
 106 MODULE_PARM_DESC(ircc_cfg, "Configuration register base address");
 107
 108 static int ircc_transceiver;
 109 module_param(ircc_transceiver, int, 0);
 110 MODULE_PARM_DESC(ircc_transceiver, "Transceiver type");
 111
 112 /* Types */
 113
 114 #ifdef CONFIG_PCI
 115 struct smsc_ircc_subsystem_configuration {
 116         unsigned short vendor; /* PCI vendor ID */
 117         unsigned short device; /* PCI vendor ID */
 118         unsigned short subvendor; /* PCI subsystem vendor ID */
 119         unsigned short subdevice; /* PCI sybsystem device ID */
 120         unsigned short sir_io; /* I/O port for SIR */
 121         unsigned short fir_io; /* I/O port for FIR */
 122         unsigned char  fir_irq; /* FIR IRQ */
 123         unsigned char  fir_dma; /* FIR DMA */
 124         unsigned short cfg_base; /* I/O port for chip configuration */
 125         int (*preconfigure)(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf); /* Preconfig function */
 126         const char *name;       /* name shown as info */
 127 };
 128 #endif
 129
 130 struct smsc_transceiver {
 131         char *name;
 132         void (*set_for_speed)(int fir_base, u32 speed);
 133         int  (*probe)(int fir_base);
 134 };
 135
 136 struct smsc_chip {
 137         char *name;
 138         #if 0
 139         u8      type;
 140         #endif
 141         u16 flags;
 142         u8 devid;
 143         u8 rev;
 144 };
 145
 146 struct smsc_chip_address {
 147         unsigned int cfg_base;
 148         unsigned int type;
 149 };
 150
 151 /* Private data for each instance */
 152 struct smsc_ircc_cb {
 153         struct net_device *netdev;     /* Yes! we are some kind of netdevice */
 154         struct net_device_stats stats;
 155         struct irlap_cb    *irlap; /* The link layer we are binded to */
 156
 157         chipio_t io;               /* IrDA controller information */
 158         iobuff_t tx_buff;          /* Transmit buffer */
 159         iobuff_t rx_buff;          /* Receive buffer */
 160         dma_addr_t tx_buff_dma;
 161         dma_addr_t rx_buff_dma;
 162
 163         struct qos_info qos;       /* QoS capabilities for this device */
 164
 165         spinlock_t lock;           /* For serializing operations */
 166
 167         __u32 new_speed;
 168         __u32 flags;               /* Interface flags */
 169
 170         int tx_buff_offsets[10];   /* Offsets between frames in tx_buff */
 171         int tx_len;                /* Number of frames in tx_buff */
 172
 173         int transceiver;
 174         struct platform_device *pldev;
 175 };
 176
 177 /* Constants */
 178
 179 #define SMSC_IRCC2_DRIVER_NAME                  "smsc-ircc2"
 180
 181 #define SMSC_IRCC2_C_IRDA_FALLBACK_SPEED        9600
 182 #define SMSC_IRCC2_C_DEFAULT_TRANSCEIVER        1
 183 #define SMSC_IRCC2_C_NET_TIMEOUT                0
 184 #define SMSC_IRCC2_C_SIR_STOP                   0
 185
 186 static const char *driver_name = SMSC_IRCC2_DRIVER_NAME;
 187
 188 /* Prototypes */
 189
 190 static int smsc_ircc_open(unsigned int firbase, unsigned int sirbase, u8 dma, u8 irq);
 191 static int smsc_ircc_present(unsigned int fir_base, unsigned int sir_base);
 192 static void smsc_ircc_setup_io(struct smsc_ircc_cb *self, unsigned int fir_base, unsigned int sir_base, u8 dma, u8 irq);
 193 static void smsc_ircc_setup_qos(struct smsc_ircc_cb *self);
 194 static void smsc_ircc_init_chip(struct smsc_ircc_cb *self);
 195 static int __exit smsc_ircc_close(struct smsc_ircc_cb *self);
 196 static int  smsc_ircc_dma_receive(struct smsc_ircc_cb *self);
 197 static void smsc_ircc_dma_receive_complete(struct smsc_ircc_cb *self);
 198 static void smsc_ircc_sir_receive(struct smsc_ircc_cb *self);
 199 static int  smsc_ircc_hard_xmit_sir(struct sk_buff *skb, struct net_device *dev);
 200 static int  smsc_ircc_hard_xmit_fir(struct sk_buff *skb, struct net_device *dev);
 201 static void smsc_ircc_dma_xmit(struct smsc_ircc_cb *self, int bofs);
 202 static void smsc_ircc_dma_xmit_complete(struct smsc_ircc_cb *self);
 203 static void smsc_ircc_change_speed(struct smsc_ircc_cb *self, u32 speed);
 204 static void smsc_ircc_set_sir_speed(struct smsc_ircc_cb *self, u32 speed);
 205 static irqreturn_t smsc_ircc_interrupt(int irq, void *dev_id);
 206 static irqreturn_t smsc_ircc_interrupt_sir(struct net_device *dev);
 207 static void smsc_ircc_sir_start(struct smsc_ircc_cb *self);
 208 #if SMSC_IRCC2_C_SIR_STOP
 209 static void smsc_ircc_sir_stop(struct smsc_ircc_cb *self);
 210 #endif
 211 static void smsc_ircc_sir_write_wakeup(struct smsc_ircc_cb *self);
 212 static int  smsc_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len);
 213 static int  smsc_ircc_net_open(struct net_device *dev);
 214 static int  smsc_ircc_net_close(struct net_device *dev);
 215 static int  smsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
 216 #if SMSC_IRCC2_C_NET_TIMEOUT
 217 static void smsc_ircc_timeout(struct net_device *dev);
 218 #endif
 219 static struct net_device_stats *smsc_ircc_net_get_stats(struct net_device *dev);
 220 static int smsc_ircc_is_receiving(struct smsc_ircc_cb *self);
 221 static void smsc_ircc_probe_transceiver(struct smsc_ircc_cb *self);
 222 static void smsc_ircc_set_transceiver_for_speed(struct smsc_ircc_cb *self, u32 speed);
 223 static void smsc_ircc_sir_wait_hw_transmitter_finish(struct smsc_ircc_cb *self);
 224
 225 /* Probing */
 226 static int __init smsc_ircc_look_for_chips(void);
 227 static const struct smsc_chip * __init smsc_ircc_probe(unsigned short cfg_base, u8 reg, const struct smsc_chip *chip, char *type);
 228 static int __init smsc_superio_flat(const struct smsc_chip *chips, unsigned short cfg_base, char *type);
 229 static int __init smsc_superio_paged(const struct smsc_chip *chips, unsigned short cfg_base, char *type);
 230 static int __init smsc_superio_fdc(unsigned short cfg_base);
 231 static int __init smsc_superio_lpc(unsigned short cfg_base);
 232 #ifdef CONFIG_PCI
 233 static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuration *conf);
 234 static int __init preconfigure_through_82801(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf);
 235 static void __init preconfigure_ali_port(struct pci_dev *dev,
 236                                          unsigned short port);
 237 static int __init preconfigure_through_ali(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf);
 238 static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg,
 239                                                     unsigned short ircc_fir,
 240                                                     unsigned short ircc_sir,
 241                                                     unsigned char ircc_dma,
 242                                                     unsigned char ircc_irq);
 243 #endif
 244
 245 /* Transceivers specific functions */
 246
 247 static void smsc_ircc_set_transceiver_toshiba_sat1800(int fir_base, u32 speed);
 248 static int  smsc_ircc_probe_transceiver_toshiba_sat1800(int fir_base);
 249 static void smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select(int fir_base, u32 speed);
 250 static int  smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select(int fir_base);
 251 static void smsc_ircc_set_transceiver_smsc_ircc_atc(int fir_base, u32 speed);
 252 static int  smsc_ircc_probe_transceiver_smsc_ircc_atc(int fir_base);
 253
 254 /* Power Management */
 255
 256 static int smsc_ircc_suspend(struct platform_device *dev, pm_message_t state);
 257 static int smsc_ircc_resume(struct platform_device *dev);
 258
 259 static struct platform_driver smsc_ircc_driver = {
 260         .suspend        = smsc_ircc_suspend,
 261         .resume         = smsc_ircc_resume,
 262         .driver         = {
 263                 .name   = SMSC_IRCC2_DRIVER_NAME,
 264         },
 265 };
 266
 267 /* Transceivers for SMSC-ircc */
 268
 269 static struct smsc_transceiver smsc_transceivers[] =
 270 {
 271         { "Toshiba Satellite 1800 (GP data pin select)", smsc_ircc_set_transceiver_toshiba_sat1800, smsc_ircc_probe_transceiver_toshiba_sat1800 },
 272         { "Fast pin select", smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select, smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select },
 273         { "ATC IRMode", smsc_ircc_set_transceiver_smsc_ircc_atc, smsc_ircc_probe_transceiver_smsc_ircc_atc },
 274         { NULL, NULL }
 275 };
 276 #define SMSC_IRCC2_C_NUMBER_OF_TRANSCEIVERS (ARRAY_SIZE(smsc_transceivers) - 1)
 277
 278 /*  SMC SuperIO chipsets definitions */
 279
 280 #define KEY55_1 0       /* SuperIO Configuration mode with Key <0x55> */
 281 #define KEY55_2 1       /* SuperIO Configuration mode with Key <0x55,0x55> */
 282 #define NoIRDA  2       /* SuperIO Chip has no IRDA Port */
 283 #define SIR     0       /* SuperIO Chip has only slow IRDA */
 284 #define FIR     4       /* SuperIO Chip has fast IRDA */
 285 #define SERx4   8       /* SuperIO Chip supports 115,2 KBaud * 4=460,8 KBaud */
 286
 287 static struct smsc_chip __initdata fdc_chips_flat[] =
 288 {
 289         /* Base address 0x3f0 or 0x370 */
 290         { "37C44",      KEY55_1|NoIRDA,         0x00, 0x00 }, /* This chip cannot be detected */
 291         { "37C665GT",   KEY55_2|NoIRDA,         0x65, 0x01 },
 292         { "37C665GT",   KEY55_2|NoIRDA,         0x66, 0x01 },
 293         { "37C669",     KEY55_2|SIR|SERx4,      0x03, 0x02 },
 294         { "37C669",     KEY55_2|SIR|SERx4,      0x04, 0x02 }, /* ID? */
 295         { "37C78",      KEY55_2|NoIRDA,         0x78, 0x00 },
 296         { "37N769",     KEY55_1|FIR|SERx4,      0x28, 0x00 },
 297         { "37N869",     KEY55_1|FIR|SERx4,      0x29, 0x00 },
 298         { NULL }
 299 };
 300
 301 static struct smsc_chip __initdata fdc_chips_paged[] =
 302 {
 303         /* Base address 0x3f0 or 0x370 */
 304         { "37B72X",     KEY55_1|SIR|SERx4,      0x4c, 0x00 },
 305         { "37B77X",     KEY55_1|SIR|SERx4,      0x43, 0x00 },
 306         { "37B78X",     KEY55_1|SIR|SERx4,      0x44, 0x00 },
 307         { "37B80X",     KEY55_1|SIR|SERx4,      0x42, 0x00 },
 308         { "37C67X",     KEY55_1|FIR|SERx4,      0x40, 0x00 },
 309         { "37C93X",     KEY55_2|SIR|SERx4,      0x02, 0x01 },
 310         { "37C93XAPM",  KEY55_1|SIR|SERx4,      0x30, 0x01 },
 311         { "37C93XFR",   KEY55_2|FIR|SERx4,      0x03, 0x01 },
 312         { "37M707",     KEY55_1|SIR|SERx4,      0x42, 0x00 },
 313         { "37M81X",     KEY55_1|SIR|SERx4,      0x4d, 0x00 },
 314         { "37N958FR",   KEY55_1|FIR|SERx4,      0x09, 0x04 },
 315         { "37N971",     KEY55_1|FIR|SERx4,      0x0a, 0x00 },
 316         { "37N972",     KEY55_1|FIR|SERx4,      0x0b, 0x00 },
 317         { NULL }
 318 };
 319
 320 static struct smsc_chip __initdata lpc_chips_flat[] =
 321 {
 322         /* Base address 0x2E or 0x4E */
 323         { "47N227",     KEY55_1|FIR|SERx4,      0x5a, 0x00 },
 324         { "47N227",     KEY55_1|FIR|SERx4,      0x7a, 0x00 },
 325         { "47N267",     KEY55_1|FIR|SERx4,      0x5e, 0x00 },
 326         { NULL }
 327 };
 328
 329 static struct smsc_chip __initdata lpc_chips_paged[] =
 330 {
 331         /* Base address 0x2E or 0x4E */
 332         { "47B27X",     KEY55_1|SIR|SERx4,      0x51, 0x00 },
 333         { "47B37X",     KEY55_1|SIR|SERx4,      0x52, 0x00 },
 334         { "47M10X",     KEY55_1|SIR|SERx4,      0x59, 0x00 },
 335         { "47M120",     KEY55_1|NoIRDA|SERx4,   0x5c, 0x00 },
 336         { "47M13X",     KEY55_1|SIR|SERx4,      0x59, 0x00 },
 337         { "47M14X",     KEY55_1|SIR|SERx4,      0x5f, 0x00 },
 338         { "47N252",     KEY55_1|FIR|SERx4,      0x0e, 0x00 },
 339         { "47S42X",     KEY55_1|SIR|SERx4,      0x57, 0x00 },
 340         { NULL }
 341 };
 342
 343 #define SMSCSIO_TYPE_FDC        1
 344 #define SMSCSIO_TYPE_LPC        2
 345 #define SMSCSIO_TYPE_FLAT       4
 346 #define SMSCSIO_TYPE_PAGED      8
 347
 348 static struct smsc_chip_address __initdata possible_addresses[] =
 349 {
 350         { 0x3f0, SMSCSIO_TYPE_FDC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED },
 351         { 0x370, SMSCSIO_TYPE_FDC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED },
 352         { 0xe0,  SMSCSIO_TYPE_FDC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED },
 353         { 0x2e,  SMSCSIO_TYPE_LPC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED },
 354         { 0x4e,  SMSCSIO_TYPE_LPC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED },
 355         { 0, 0 }
 356 };
 357
 358 /* Globals */
 359
 360 static struct smsc_ircc_cb *dev_self[] = { NULL, NULL };
 361 static unsigned short dev_count;
 362
 363 static inline void register_bank(int iobase, int bank)
 364 {
 365         outb(((inb(iobase + IRCC_MASTER) & 0xf0) | (bank & 0x07)),
 366                iobase + IRCC_MASTER);
 367 }
 368
 369 /* PNP hotplug support */
 370 static const struct pnp_device_id smsc_ircc_pnp_table[] = {
 371         { .id = "SMCf010", .driver_data = 0 },
 372         /* and presumably others */
 373         { }
 374 };
 375 MODULE_DEVICE_TABLE(pnp, smsc_ircc_pnp_table);
 376
 377 static int pnp_driver_registered;
 378
 379 static int __init smsc_ircc_pnp_probe(struct pnp_dev *dev,
 380                                       const struct pnp_device_id *dev_id)
 381 {
 382         unsigned int firbase, sirbase;
 383         u8 dma, irq;
 384
 385         if (!(pnp_port_valid(dev, 0) && pnp_port_valid(dev, 1) &&
 386               pnp_dma_valid(dev, 0) && pnp_irq_valid(dev, 0)))
 387                 return -EINVAL;
 388
 389         sirbase = pnp_port_start(dev, 0);
 390         firbase = pnp_port_start(dev, 1);
 391         dma = pnp_dma(dev, 0);
 392         irq = pnp_irq(dev, 0);
 393
 394         if (smsc_ircc_open(firbase, sirbase, dma, irq))
 395                 return -ENODEV;
 396
 397         return 0;
 398 }
 399
 400 static struct pnp_driver smsc_ircc_pnp_driver = {
 401         .name           = "smsc-ircc2",
 402         .id_table       = smsc_ircc_pnp_table,
 403         .probe          = smsc_ircc_pnp_probe,
 404 };
 405
 406
 407 /*******************************************************************************
 408  *
 409  *
 410  * SMSC-ircc stuff
 411  *
 412  *
 413  *******************************************************************************/
 414
 415 static int __init smsc_ircc_legacy_probe(void)
 416 {
 417         int ret = 0;
 418
 419         if (ircc_fir > 0 && ircc_sir > 0) {
 420                 IRDA_MESSAGE(" Overriding FIR address 0x%04x\n", ircc_fir);
 421                 IRDA_MESSAGE(" Overriding SIR address 0x%04x\n", ircc_sir);
 422
 423                 if (smsc_ircc_open(ircc_fir, ircc_sir, ircc_dma, ircc_irq))
 424                         ret = -ENODEV;
 425         } else {
 426                 ret = -ENODEV;
 427
 428                 /* try user provided configuration register base address */
 429                 if (ircc_cfg > 0) {
 430                         IRDA_MESSAGE(" Overriding configuration address "
 431                                      "0x%04x\n", ircc_cfg);
 432                         if (!smsc_superio_fdc(ircc_cfg))
 433                                 ret = 0;
 434                         if (!smsc_superio_lpc(ircc_cfg))
 435                                 ret = 0;
 436                 }
 437
 438                 if (smsc_ircc_look_for_chips() > 0)
 439                         ret = 0;
 440         }
 441         return ret;
 442 }
 443
 444 /*
 445  * Function smsc_ircc_init ()
 446  *
 447  *    Initialize chip. Just try to find out how many chips we are dealing with
 448  *    and where they are
 449  */
 450 static int __init smsc_ircc_init(void)
 451 {
 452         int ret;
 453
 454         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
 455
 456         ret = platform_driver_register(&smsc_ircc_driver);
 457         if (ret) {
 458                 IRDA_ERROR("%s, Can't register driver!\n", driver_name);
 459                 return ret;
 460         }
 461
 462 #ifdef CONFIG_PCI
 463         if (smsc_ircc_preconfigure_subsystems(ircc_cfg, ircc_fir, ircc_sir, ircc_dma, ircc_irq) < 0) {
 464                 /* Ignore errors from preconfiguration */
 465                 IRDA_ERROR("%s, Preconfiguration failed !\n", driver_name);
 466         }
 467 #endif
 468
 469         dev_count = 0;
 470
 471         if (smsc_nopnp || !pnp_platform_devices ||
 472             ircc_cfg || ircc_fir || ircc_sir ||
 473             ircc_dma != DMA_INVAL || ircc_irq != IRQ_INVAL) {
 474                 ret = smsc_ircc_legacy_probe();
 475         } else {
 476                 if (pnp_register_driver(&smsc_ircc_pnp_driver) == 0)
 477                         pnp_driver_registered = 1;
 478         }
 479
 480         if (ret) {
 481                 if (pnp_driver_registered)
 482                         pnp_unregister_driver(&smsc_ircc_pnp_driver);
 483                 platform_driver_unregister(&smsc_ircc_driver);
 484         }
 485
 486         return ret;
 487 }
 488
 489 /*
 490  * Function smsc_ircc_open (firbase, sirbase, dma, irq)
 491  *
 492  *    Try to open driver instance
 493  *
 494  */
 495 static int __init smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u8 dma, u8 irq)
 496 {
 497         struct smsc_ircc_cb *self;
 498         struct net_device *dev;
 499         int err;
 500
 501         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
 502
 503         err = smsc_ircc_present(fir_base, sir_base);
 504         if (err)
 505                 goto err_out;
 506
 507         err = -ENOMEM;
 508         if (dev_count >= ARRAY_SIZE(dev_self)) {
 509                 IRDA_WARNING("%s(), too many devices!\n", __FUNCTION__);
 510                 goto err_out1;
 511         }
 512
 513         /*
 514          *  Allocate new instance of the driver
 515          */
 516         dev = alloc_irdadev(sizeof(struct smsc_ircc_cb));
 517         if (!dev) {
 518                 IRDA_WARNING("%s() can't allocate net device\n", __FUNCTION__);
 519                 goto err_out1;
 520         }
 521
 522         SET_MODULE_OWNER(dev);
 523
 524         dev->hard_start_xmit = smsc_ircc_hard_xmit_sir;
 525 #if SMSC_IRCC2_C_NET_TIMEOUT
 526         dev->tx_timeout      = smsc_ircc_timeout;
 527         dev->watchdog_timeo  = HZ * 2;  /* Allow enough time for speed change */
 528 #endif
 529         dev->open            = smsc_ircc_net_open;
 530         dev->stop            = smsc_ircc_net_close;
 531         dev->do_ioctl        = smsc_ircc_net_ioctl;
 532         dev->get_stats       = smsc_ircc_net_get_stats;
 533
 534         self = netdev_priv(dev);
 535         self->netdev = dev;
 536
 537         /* Make ifconfig display some details */
 538         dev->base_addr = self->io.fir_base = fir_base;
 539         dev->irq = self->io.irq = irq;
 540
 541         /* Need to store self somewhere */
 542         dev_self[dev_count] = self;
 543         spin_lock_init(&self->lock);
 544
 545         self->rx_buff.truesize = SMSC_IRCC2_RX_BUFF_TRUESIZE;
 546         self->tx_buff.truesize = SMSC_IRCC2_TX_BUFF_TRUESIZE;
 547
 548         self->rx_buff.head =
 549                 dma_alloc_coherent(NULL, self->rx_buff.truesize,
 550                                    &self->rx_buff_dma, GFP_KERNEL);
 551         if (self->rx_buff.head == NULL) {
 552                 IRDA_ERROR("%s, Can't allocate memory for receive buffer!\n",
 553                            driver_name);
 554                 goto err_out2;
 555         }
 556
 557         self->tx_buff.head =
 558                 dma_alloc_coherent(NULL, self->tx_buff.truesize,
 559                                    &self->tx_buff_dma, GFP_KERNEL);
 560         if (self->tx_buff.head == NULL) {
 561                 IRDA_ERROR("%s, Can't allocate memory for transmit buffer!\n",
 562                            driver_name);
 563                 goto err_out3;
 564         }
 565
 566         memset(self->rx_buff.head, 0, self->rx_buff.truesize);
 567         memset(self->tx_buff.head, 0, self->tx_buff.truesize);
 568
 569         self->rx_buff.in_frame = FALSE;
 570         self->rx_buff.state = OUTSIDE_FRAME;
 571         self->tx_buff.data = self->tx_buff.head;
 572         self->rx_buff.data = self->rx_buff.head;
 573
 574         smsc_ircc_setup_io(self, fir_base, sir_base, dma, irq);
 575         smsc_ircc_setup_qos(self);
 576         smsc_ircc_init_chip(self);
 577
 578         if (ircc_transceiver > 0  &&
 579             ircc_transceiver < SMSC_IRCC2_C_NUMBER_OF_TRANSCEIVERS)
 580                 self->transceiver = ircc_transceiver;
 581         else
 582                 smsc_ircc_probe_transceiver(self);
 583
 584         err = register_netdev(self->netdev);
 585         if (err) {
 586                 IRDA_ERROR("%s, Network device registration failed!\n",
 587                            driver_name);
 588                 goto err_out4;
 589         }
 590
 591         self->pldev = platform_device_register_simple(SMSC_IRCC2_DRIVER_NAME,
 592                                                       dev_count, NULL, 0);
 593         if (IS_ERR(self->pldev)) {
 594                 err = PTR_ERR(self->pldev);
 595                 goto err_out5;
 596         }
 597         platform_set_drvdata(self->pldev, self);
 598
 599         IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name);
 600         dev_count++;
 601
 602         return 0;
 603
 604  err_out5:
 605         unregister_netdev(self->netdev);
 606
 607  err_out4:
 608         dma_free_coherent(NULL, self->tx_buff.truesize,
 609                           self->tx_buff.head, self->tx_buff_dma);
 610  err_out3:
 611         dma_free_coherent(NULL, self->rx_buff.truesize,
 612                           self->rx_buff.head, self->rx_buff_dma);
 613  err_out2:
 614         free_netdev(self->netdev);
 615         dev_self[dev_count] = NULL;
 616  err_out1:
 617         release_region(fir_base, SMSC_IRCC2_FIR_CHIP_IO_EXTENT);
 618         release_region(sir_base, SMSC_IRCC2_SIR_CHIP_IO_EXTENT);
 619  err_out:
 620         return err;
 621 }
 622
 623 /*
 624  * Function smsc_ircc_present(fir_base, sir_base)
 625  *
 626  *    Check the smsc-ircc chip presence
 627  *
 628  */
 629 static int smsc_ircc_present(unsigned int fir_base, unsigned int sir_base)
 630 {
 631         unsigned char low, high, chip, config, dma, irq, version;
 632
 633         if (!request_region(fir_base, SMSC_IRCC2_FIR_CHIP_IO_EXTENT,
 634                             driver_name)) {
 635                 IRDA_WARNING("%s: can't get fir_base of 0x%03x\n",
 636                              __FUNCTION__, fir_base);
 637                 goto out1;
 638         }
 639
 640         if (!request_region(sir_base, SMSC_IRCC2_SIR_CHIP_IO_EXTENT,
 641                             driver_name)) {
 642                 IRDA_WARNING("%s: can't get sir_base of 0x%03x\n",
 643                              __FUNCTION__, sir_base);
 644                 goto out2;
 645         }
 646
 647         register_bank(fir_base, 3);
 648
 649         high    = inb(fir_base + IRCC_ID_HIGH);
 650         low     = inb(fir_base + IRCC_ID_LOW);
 651         chip    = inb(fir_base + IRCC_CHIP_ID);
 652         version = inb(fir_base + IRCC_VERSION);
 653         config  = inb(fir_base + IRCC_INTERFACE);
 654         dma     = config & IRCC_INTERFACE_DMA_MASK;
 655         irq     = (config & IRCC_INTERFACE_IRQ_MASK) >> 4;
 656
 657         if (high != 0x10 || low != 0xb8 || (chip != 0xf1 && chip != 0xf2)) {
 658                 IRDA_WARNING("%s(), addr 0x%04x - no device found!\n",
 659                              __FUNCTION__, fir_base);
 660                 goto out3;
 661         }
 662         IRDA_MESSAGE("SMsC IrDA Controller found\n IrCC version %d.%d, "
 663                      "firport 0x%03x, sirport 0x%03x dma=%d, irq=%d\n",
 664                      chip & 0x0f, version, fir_base, sir_base, dma, irq);
 665
 666         return 0;
 667
 668  out3:
 669         release_region(sir_base, SMSC_IRCC2_SIR_CHIP_IO_EXTENT);
 670  out2:
 671         release_region(fir_base, SMSC_IRCC2_FIR_CHIP_IO_EXTENT);
 672  out1:
 673         return -ENODEV;
 674 }
 675
 676 /*
 677  * Function smsc_ircc_setup_io(self, fir_base, sir_base, dma, irq)
 678  *
 679  *    Setup I/O
 680  *
 681  */
 682 static void smsc_ircc_setup_io(struct smsc_ircc_cb *self,
 683                                unsigned int fir_base, unsigned int sir_base,
 684                                u8 dma, u8 irq)
 685 {
 686         unsigned char config, chip_dma, chip_irq;
 687
 688         register_bank(fir_base, 3);
 689         config = inb(fir_base + IRCC_INTERFACE);
 690         chip_dma = config & IRCC_INTERFACE_DMA_MASK;
 691         chip_irq = (config & IRCC_INTERFACE_IRQ_MASK) >> 4;
 692
 693         self->io.fir_base  = fir_base;
 694         self->io.sir_base  = sir_base;
 695         self->io.fir_ext   = SMSC_IRCC2_FIR_CHIP_IO_EXTENT;
 696         self->io.sir_ext   = SMSC_IRCC2_SIR_CHIP_IO_EXTENT;
 697         self->io.fifo_size = SMSC_IRCC2_FIFO_SIZE;
 698         self->io.speed = SMSC_IRCC2_C_IRDA_FALLBACK_SPEED;
 699
 700         if (irq != IRQ_INVAL) {
 701                 if (irq != chip_irq)
 702                         IRDA_MESSAGE("%s, Overriding IRQ - chip says %d, using %d\n",
 703                                      driver_name, chip_irq, irq);
 704                 self->io.irq = irq;
 705         } else
 706                 self->io.irq = chip_irq;
 707
 708         if (dma != DMA_INVAL) {
 709                 if (dma != chip_dma)
 710                         IRDA_MESSAGE("%s, Overriding DMA - chip says %d, using %d\n",
 711                                      driver_name, chip_dma, dma);
 712                 self->io.dma = dma;
 713         } else
 714                 self->io.dma = chip_dma;
 715
 716 }
 717
 718 /*
 719  * Function smsc_ircc_setup_qos(self)
 720  *
 721  *    Setup qos
 722  *
 723  */
 724 static void smsc_ircc_setup_qos(struct smsc_ircc_cb *self)
 725 {
 726         /* Initialize QoS for this device */
 727         irda_init_max_qos_capabilies(&self->qos);
 728
 729         self->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600|
 730                 IR_115200|IR_576000|IR_1152000|(IR_4000000 << 8);
 731
 732         self->qos.min_turn_time.bits = SMSC_IRCC2_MIN_TURN_TIME;
 733         self->qos.window_size.bits = SMSC_IRCC2_WINDOW_SIZE;
 734         irda_qos_bits_to_value(&self->qos);
 735 }
 736
 737 /*
 738  * Function smsc_ircc_init_chip(self)
 739  *
 740  *    Init chip
 741  *
 742  */
 743 static void smsc_ircc_init_chip(struct smsc_ircc_cb *self)
 744 {
 745         int iobase = self->io.fir_base;
 746
 747         register_bank(iobase, 0);
 748         outb(IRCC_MASTER_RESET, iobase + IRCC_MASTER);
 749         outb(0x00, iobase + IRCC_MASTER);
 750
 751         register_bank(iobase, 1);
 752         outb(((inb(iobase + IRCC_SCE_CFGA) & 0x87) | IRCC_CFGA_IRDA_SIR_A),
 753              iobase + IRCC_SCE_CFGA);
 754
 755 #ifdef smsc_669 /* Uses pin 88/89 for Rx/Tx */
 756         outb(((inb(iobase + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_COM),
 757              iobase + IRCC_SCE_CFGB);
 758 #else
 759         outb(((inb(iobase + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_IR),
 760              iobase + IRCC_SCE_CFGB);
 761 #endif
 762         (void) inb(iobase + IRCC_FIFO_THRESHOLD);
 763         outb(SMSC_IRCC2_FIFO_THRESHOLD, iobase + IRCC_FIFO_THRESHOLD);
 764
 765         register_bank(iobase, 4);
 766         outb((inb(iobase + IRCC_CONTROL) & 0x30), iobase + IRCC_CONTROL);
 767
 768         register_bank(iobase, 0);
 769         outb(0, iobase + IRCC_LCR_A);
 770
 771         smsc_ircc_set_sir_speed(self, SMSC_IRCC2_C_IRDA_FALLBACK_SPEED);
 772
 773         /* Power on device */
 774         outb(0x00, iobase + IRCC_MASTER);
 775 }
 776
 777 /*
 778  * Function smsc_ircc_net_ioctl (dev, rq, cmd)
 779  *
 780  *    Process IOCTL commands for this device
 781  *
 782  */
 783 static int smsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 784 {
 785         struct if_irda_req *irq = (struct if_irda_req *) rq;
 786         struct smsc_ircc_cb *self;
 787         unsigned long flags;
 788         int ret = 0;
 789
 790         IRDA_ASSERT(dev != NULL, return -1;);
 791
 792         self = netdev_priv(dev);
 793
 794         IRDA_ASSERT(self != NULL, return -1;);
 795
 796         IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd);
 797
 798         switch (cmd) {
 799         case SIOCSBANDWIDTH: /* Set bandwidth */
 800                 if (!capable(CAP_NET_ADMIN))
 801                         ret = -EPERM;
 802                 else {
 803                         /* Make sure we are the only one touching
 804                          * self->io.speed and the hardware - Jean II */
 805                         spin_lock_irqsave(&self->lock, flags);
 806                         smsc_ircc_change_speed(self, irq->ifr_baudrate);
 807                         spin_unlock_irqrestore(&self->lock, flags);
 808                 }
 809                 break;
 810         case SIOCSMEDIABUSY: /* Set media busy */
 811                 if (!capable(CAP_NET_ADMIN)) {
 812                         ret = -EPERM;
 813                         break;
 814                 }
 815
 816                 irda_device_set_media_busy(self->netdev, TRUE);
 817                 break;
 818         case SIOCGRECEIVING: /* Check if we are receiving right now */
 819                 irq->ifr_receiving = smsc_ircc_is_receiving(self);
 820                 break;
 821         #if 0
 822         case SIOCSDTRRTS:
 823                 if (!capable(CAP_NET_ADMIN)) {
 824                         ret = -EPERM;
 825                         break;
 826                 }
 827                 smsc_ircc_sir_set_dtr_rts(dev, irq->ifr_dtr, irq->ifr_rts);
 828                 break;
 829         #endif
 830         default:
 831                 ret = -EOPNOTSUPP;
 832         }
 833
 834         return ret;
 835 }
 836
 837 static struct net_device_stats *smsc_ircc_net_get_stats(struct net_device *dev)
 838 {
 839         struct smsc_ircc_cb *self = netdev_priv(dev);
 840
 841         return &self->stats;
 842 }
 843
 844 #if SMSC_IRCC2_C_NET_TIMEOUT
 845 /*
 846  * Function smsc_ircc_timeout (struct net_device *dev)
 847  *
 848  *    The networking timeout management.
 849  *
 850  */
 851
 852 static void smsc_ircc_timeout(struct net_device *dev)
 853 {
 854         struct smsc_ircc_cb *self = netdev_priv(dev);
 855         unsigned long flags;
 856
 857         IRDA_WARNING("%s: transmit timed out, changing speed to: %d\n",
 858                      dev->name, self->io.speed);
 859         spin_lock_irqsave(&self->lock, flags);
 860         smsc_ircc_sir_start(self);
 861         smsc_ircc_change_speed(self, self->io.speed);
 862         dev->trans_start = jiffies;
 863         netif_wake_queue(dev);
 864         spin_unlock_irqrestore(&self->lock, flags);
 865 }
 866 #endif
 867
 868 /*
 869  * Function smsc_ircc_hard_xmit_sir (struct sk_buff *skb, struct net_device *dev)
 870  *
 871  *    Transmits the current frame until FIFO is full, then
 872  *    waits until the next transmit interrupt, and continues until the
 873  *    frame is transmitted.
 874  */
 875 int smsc_ircc_hard_xmit_sir(struct sk_buff *skb, struct net_device *dev)
 876 {
 877         struct smsc_ircc_cb *self;
 878         unsigned long flags;
 879         s32 speed;
 880
 881         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
 882
 883         IRDA_ASSERT(dev != NULL, return 0;);
 884
 885         self = netdev_priv(dev);
 886         IRDA_ASSERT(self != NULL, return 0;);
 887
 888         netif_stop_queue(dev);
 889
 890         /* Make sure test of self->io.speed & speed change are atomic */
 891         spin_lock_irqsave(&self->lock, flags);
 892
 893         /* Check if we need to change the speed */
 894         speed = irda_get_next_speed(skb);
 895         if (speed != self->io.speed && speed != -1) {
 896                 /* Check for empty frame */
 897                 if (!skb->len) {
 898                         /*
 899                          * We send frames one by one in SIR mode (no
 900                          * pipelining), so at this point, if we were sending
 901                          * a previous frame, we just received the interrupt
 902                          * telling us it is finished (UART_IIR_THRI).
 903                          * Therefore, waiting for the transmitter to really
 904                          * finish draining the fifo won't take too long.
 905                          * And the interrupt handler is not expected to run.
 906                          * - Jean II */
 907                         smsc_ircc_sir_wait_hw_transmitter_finish(self);
 908                         smsc_ircc_change_speed(self, speed);
 909                         spin_unlock_irqrestore(&self->lock, flags);
 910                         dev_kfree_skb(skb);
 911                         return 0;
 912                 }
 913                 self->new_speed = speed;
 914         }
 915
 916         /* Init tx buffer */
 917         self->tx_buff.data = self->tx_buff.head;
 918
 919         /* Copy skb to tx_buff while wrapping, stuffing and making CRC */
 920         self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data,
 921                                            self->tx_buff.truesize);
 922
 923         self->stats.tx_bytes += self->tx_buff.len;
 924
 925         /* Turn on transmit finished interrupt. Will fire immediately!  */
 926         outb(UART_IER_THRI, self->io.sir_base + UART_IER);
 927
 928         spin_unlock_irqrestore(&self->lock, flags);
 929
 930         dev_kfree_skb(skb);
 931
 932         return 0;
 933 }
 934
 935 /*
 936  * Function smsc_ircc_set_fir_speed (self, baud)
 937  *
 938  *    Change the speed of the device
 939  *
 940  */
 941 static void smsc_ircc_set_fir_speed(struct smsc_ircc_cb *self, u32 speed)
 942 {
 943         int fir_base, ir_mode, ctrl, fast;
 944
 945         IRDA_ASSERT(self != NULL, return;);
 946         fir_base = self->io.fir_base;
 947
 948         self->io.speed = speed;
 949
 950         switch (speed) {
 951         default:
 952         case 576000:
 953                 ir_mode = IRCC_CFGA_IRDA_HDLC;
 954                 ctrl = IRCC_CRC;
 955                 fast = 0;
 956                 IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __FUNCTION__);
 957                 break;
 958         case 1152000:
 959                 ir_mode = IRCC_CFGA_IRDA_HDLC;
 960                 ctrl = IRCC_1152 | IRCC_CRC;
 961                 fast = IRCC_LCR_A_FAST | IRCC_LCR_A_GP_DATA;
 962                 IRDA_DEBUG(0, "%s(), handling baud of 1152000\n",
 963                            __FUNCTION__);
 964                 break;
 965         case 4000000:
 966                 ir_mode = IRCC_CFGA_IRDA_4PPM;
 967                 ctrl = IRCC_CRC;
 968                 fast = IRCC_LCR_A_FAST;
 969                 IRDA_DEBUG(0, "%s(), handling baud of 4000000\n",
 970                            __FUNCTION__);
 971                 break;
 972         }
 973         #if 0
 974         Now in tranceiver!
 975         /* This causes an interrupt */
 976         register_bank(fir_base, 0);
 977         outb((inb(fir_base + IRCC_LCR_A) &  0xbf) | fast, fir_base + IRCC_LCR_A);
 978         #endif
 979
 980         register_bank(fir_base, 1);
 981         outb(((inb(fir_base + IRCC_SCE_CFGA) & IRCC_SCE_CFGA_BLOCK_CTRL_BITS_MASK) | ir_mode), fir_base + IRCC_SCE_CFGA);
 982
 983         register_bank(fir_base, 4);
 984         outb((inb(fir_base + IRCC_CONTROL) & 0x30) | ctrl, fir_base + IRCC_CONTROL);
 985 }
 986
 987 /*
 988  * Function smsc_ircc_fir_start(self)
 989  *
 990  *    Change the speed of the device
 991  *
 992  */
 993 static void smsc_ircc_fir_start(struct smsc_ircc_cb *self)
 994 {
 995         struct net_device *dev;
 996         int fir_base;
 997
 998         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
 999
1000         IRDA_ASSERT(self != NULL, return;);
1001         dev = self->netdev;
1002         IRDA_ASSERT(dev != NULL, return;);
1003
1004         fir_base = self->io.fir_base;
1005
1006         /* Reset everything */
1007
1008         /* Install FIR transmit handler */
1009         dev->hard_start_xmit = smsc_ircc_hard_xmit_fir;
1010
1011         /* Clear FIFO */
1012         outb(inb(fir_base + IRCC_LCR_A) | IRCC_LCR_A_FIFO_RESET, fir_base + IRCC_LCR_A);
1013
1014         /* Enable interrupt */
1015         /*outb(IRCC_IER_ACTIVE_FRAME|IRCC_IER_EOM, fir_base + IRCC_IER);*/
1016
1017         register_bank(fir_base, 1);
1018
1019         /* Select the TX/RX interface */
1020 #ifdef SMSC_669 /* Uses pin 88/89 for Rx/Tx */
1021         outb(((inb(fir_base + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_COM),
1022              fir_base + IRCC_SCE_CFGB);
1023 #else
1024         outb(((inb(fir_base + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_IR),
1025              fir_base + IRCC_SCE_CFGB);
1026 #endif
1027         (void) inb(fir_base + IRCC_FIFO_THRESHOLD);
1028
1029         /* Enable SCE interrupts */
1030         outb(0, fir_base + IRCC_MASTER);
1031         register_bank(fir_base, 0);
1032         outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, fir_base + IRCC_IER);
1033         outb(IRCC_MASTER_INT_EN, fir_base + IRCC_MASTER);
1034 }
1035
1036 /*
1037  * Function smsc_ircc_fir_stop(self, baud)
1038  *
1039  *    Change the speed of the device
1040  *
1041  */
1042 static void smsc_ircc_fir_stop(struct smsc_ircc_cb *self)
1043 {
1044         int fir_base;
1045
1046         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
1047
1048         IRDA_ASSERT(self != NULL, return;);
1049
1050         fir_base = self->io.fir_base;
1051         register_bank(fir_base, 0);
1052         /*outb(IRCC_MASTER_RESET, fir_base + IRCC_MASTER);*/
1053         outb(inb(fir_base + IRCC_LCR_B) & IRCC_LCR_B_SIP_ENABLE, fir_base + IRCC_LCR_B);
1054 }
1055
1056
1057 /*
1058  * Function smsc_ircc_change_speed(self, baud)
1059  *
1060  *    Change the speed of the device
1061  *
1062  * This function *must* be called with spinlock held, because it may
1063  * be called from the irq handler. - Jean II
1064  */
1065 static void smsc_ircc_change_speed(struct smsc_ircc_cb *self, u32 speed)
1066 {
1067         struct net_device *dev;
1068         int last_speed_was_sir;
1069
1070         IRDA_DEBUG(0, "%s() changing speed to: %d\n", __FUNCTION__, speed);
1071
1072         IRDA_ASSERT(self != NULL, return;);
1073         dev = self->netdev;
1074
1075         last_speed_was_sir = self->io.speed <= SMSC_IRCC2_MAX_SIR_SPEED;
1076
1077         #if 0
1078         /* Temp Hack */
1079         speed= 1152000;
1080         self->io.speed = speed;
1081         last_speed_was_sir = 0;
1082         smsc_ircc_fir_start(self);
1083         #endif
1084
1085         if (self->io.speed == 0)
1086                 smsc_ircc_sir_start(self);
1087
1088         #if 0
1089         if (!last_speed_was_sir) speed = self->io.speed;
1090         #endif
1091
1092         if (self->io.speed != speed)
1093                 smsc_ircc_set_transceiver_for_speed(self, speed);
1094
1095         self->io.speed = speed;
1096
1097         if (speed <= SMSC_IRCC2_MAX_SIR_SPEED) {
1098                 if (!last_speed_was_sir) {
1099                         smsc_ircc_fir_stop(self);
1100                         smsc_ircc_sir_start(self);
1101                 }
1102                 smsc_ircc_set_sir_speed(self, speed);
1103         } else {
1104                 if (last_speed_was_sir) {
1105                         #if SMSC_IRCC2_C_SIR_STOP
1106                         smsc_ircc_sir_stop(self);
1107                         #endif
1108                         smsc_ircc_fir_start(self);
1109                 }
1110                 smsc_ircc_set_fir_speed(self, speed);
1111
1112                 #if 0
1113                 self->tx_buff.len = 10;
1114                 self->tx_buff.data = self->tx_buff.head;
1115
1116                 smsc_ircc_dma_xmit(self, 4000);
1117                 #endif
1118                 /* Be ready for incoming frames */
1119                 smsc_ircc_dma_receive(self);
1120         }
1121
1122         netif_wake_queue(dev);
1123 }
1124
1125 /*
1126  * Function smsc_ircc_set_sir_speed (self, speed)
1127  *
1128  *    Set speed of IrDA port to specified baudrate
1129  *
1130  */
1131 void smsc_ircc_set_sir_speed(struct smsc_ircc_cb *self, __u32 speed)
1132 {
1133         int iobase;
1134         int fcr;    /* FIFO control reg */
1135         int lcr;    /* Line control reg */
1136         int divisor;
1137
1138         IRDA_DEBUG(0, "%s(), Setting speed to: %d\n", __FUNCTION__, speed);
1139
1140         IRDA_ASSERT(self != NULL, return;);
1141         iobase = self->io.sir_base;
1142
1143         /* Update accounting for new speed */
1144         self->io.speed = speed;
1145
1146         /* Turn off interrupts */
1147         outb(0, iobase + UART_IER);
1148
1149         divisor = SMSC_IRCC2_MAX_SIR_SPEED / speed;
1150
1151         fcr = UART_FCR_ENABLE_FIFO;
1152
1153         /*
1154          * Use trigger level 1 to avoid 3 ms. timeout delay at 9600 bps, and
1155          * almost 1,7 ms at 19200 bps. At speeds above that we can just forget
1156          * about this timeout since it will always be fast enough.
1157          */
1158         fcr |= self->io.speed < 38400 ?
1159                 UART_FCR_TRIGGER_1 : UART_FCR_TRIGGER_14;
1160
1161         /* IrDA ports use 8N1 */
1162         lcr = UART_LCR_WLEN8;
1163
1164         outb(UART_LCR_DLAB | lcr, iobase + UART_LCR); /* Set DLAB */
1165         outb(divisor & 0xff,      iobase + UART_DLL); /* Set speed */
1166         outb(divisor >> 8,        iobase + UART_DLM);
1167         outb(lcr,                 iobase + UART_LCR); /* Set 8N1 */
1168         outb(fcr,                 iobase + UART_FCR); /* Enable FIFO's */
1169
1170         /* Turn on interrups */
1171         outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER);
1172
1173         IRDA_DEBUG(2, "%s() speed changed to: %d\n", __FUNCTION__, speed);
1174 }
1175
1176
1177 /*
1178  * Function smsc_ircc_hard_xmit_fir (skb, dev)
1179  *
1180  *    Transmit the frame!
1181  *
1182  */
1183 static int smsc_ircc_hard_xmit_fir(struct sk_buff *skb, struct net_device *dev)
1184 {
1185         struct smsc_ircc_cb *self;
1186         unsigned long flags;
1187         s32 speed;
1188         int mtt;
1189
1190         IRDA_ASSERT(dev != NULL, return 0;);
1191         self = netdev_priv(dev);
1192         IRDA_ASSERT(self != NULL, return 0;);
1193
1194         netif_stop_queue(dev);
1195
1196         /* Make sure test of self->io.speed & speed change are atomic */
1197         spin_lock_irqsave(&self->lock, flags);
1198
1199         /* Check if we need to change the speed after this frame */
1200         speed = irda_get_next_speed(skb);
1201         if (speed != self->io.speed && speed != -1) {
1202                 /* Check for empty frame */
1203                 if (!skb->len) {
1204                         /* Note : you should make sure that speed changes
1205                          * are not going to corrupt any outgoing frame.
1206                          * Look at nsc-ircc for the gory details - Jean II */
1207                         smsc_ircc_change_speed(self, speed);
1208                         spin_unlock_irqrestore(&self->lock, flags);
1209                         dev_kfree_skb(skb);
1210                         return 0;
1211                 }
1212
1213                 self->new_speed = speed;
1214         }
1215
1216         skb_copy_from_linear_data(skb, self->tx_buff.head, skb->len);
1217
1218         self->tx_buff.len = skb->len;
1219         self->tx_buff.data = self->tx_buff.head;
1220
1221         mtt = irda_get_mtt(skb);
1222         if (mtt) {
1223                 int bofs;
1224
1225                 /*
1226                  * Compute how many BOFs (STA or PA's) we need to waste the
1227                  * min turn time given the speed of the link.
1228                  */
1229                 bofs = mtt * (self->io.speed / 1000) / 8000;
1230                 if (bofs > 4095)
1231                         bofs = 4095;
1232
1233                 smsc_ircc_dma_xmit(self, bofs);
1234         } else {
1235                 /* Transmit frame */
1236                 smsc_ircc_dma_xmit(self, 0);
1237         }
1238
1239         spin_unlock_irqrestore(&self->lock, flags);
1240         dev_kfree_skb(skb);
1241
1242         return 0;
1243 }
1244
1245 /*
1246  * Function smsc_ircc_dma_xmit (self, bofs)
1247  *
1248  *    Transmit data using DMA
1249  *
1250  */
1251 static void smsc_ircc_dma_xmit(struct smsc_ircc_cb *self, int bofs)
1252 {
1253         int iobase = self->io.fir_base;
1254         u8 ctrl;
1255
1256         IRDA_DEBUG(3, "%s\n", __FUNCTION__);
1257 #if 1
1258         /* Disable Rx */
1259         register_bank(iobase, 0);
1260         outb(0x00, iobase + IRCC_LCR_B);
1261 #endif
1262         register_bank(iobase, 1);
1263         outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE,
1264              iobase + IRCC_SCE_CFGB);
1265
1266         self->io.direction = IO_XMIT;
1267
1268         /* Set BOF additional count for generating the min turn time */
1269         register_bank(iobase, 4);
1270         outb(bofs & 0xff, iobase + IRCC_BOF_COUNT_LO);
1271         ctrl = inb(iobase + IRCC_CONTROL) & 0xf0;
1272         outb(ctrl | ((bofs >> 8) & 0x0f), iobase + IRCC_BOF_COUNT_HI);
1273
1274         /* Set max Tx frame size */
1275         outb(self->tx_buff.len >> 8, iobase + IRCC_TX_SIZE_HI);
1276         outb(self->tx_buff.len & 0xff, iobase + IRCC_TX_SIZE_LO);
1277
1278         /*outb(UART_MCR_OUT2, self->io.sir_base + UART_MCR);*/
1279
1280         /* Enable burst mode chip Tx DMA */
1281         register_bank(iobase, 1);
1282         outb(inb(iobase + IRCC_SCE_CFGB) | IRCC_CFGB_DMA_ENABLE |
1283              IRCC_CFGB_DMA_BURST, iobase + IRCC_SCE_CFGB);
1284
1285         /* Setup DMA controller (must be done after enabling chip DMA) */
1286         irda_setup_dma(self->io.dma, self->tx_buff_dma, self->tx_buff.len,
1287                        DMA_TX_MODE);
1288
1289         /* Enable interrupt */
1290
1291         register_bank(iobase, 0);
1292         outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, iobase + IRCC_IER);
1293         outb(IRCC_MASTER_INT_EN, iobase + IRCC_MASTER);
1294
1295         /* Enable transmit */
1296         outb(IRCC_LCR_B_SCE_TRANSMIT | IRCC_LCR_B_SIP_ENABLE, iobase + IRCC_LCR_B);
1297 }
1298
1299 /*
1300  * Function smsc_ircc_dma_xmit_complete (self)
1301  *
1302  *    The transfer of a frame in finished. This function will only be called
1303  *    by the interrupt handler
1304  *
1305  */
1306 static void smsc_ircc_dma_xmit_complete(struct smsc_ircc_cb *self)
1307 {
1308         int iobase = self->io.fir_base;
1309
1310         IRDA_DEBUG(3, "%s\n", __FUNCTION__);
1311 #if 0
1312         /* Disable Tx */
1313         register_bank(iobase, 0);
1314         outb(0x00, iobase + IRCC_LCR_B);
1315 #endif
1316         register_bank(iobase, 1);
1317         outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE,
1318              iobase + IRCC_SCE_CFGB);
1319
1320         /* Check for underrun! */
1321         register_bank(iobase, 0);
1322         if (inb(iobase + IRCC_LSR) & IRCC_LSR_UNDERRUN) {
1323                 self->stats.tx_errors++;
1324                 self->stats.tx_fifo_errors++;
1325
1326                 /* Reset error condition */
1327                 register_bank(iobase, 0);
1328                 outb(IRCC_MASTER_ERROR_RESET, iobase + IRCC_MASTER);
1329                 outb(0x00, iobase + IRCC_MASTER);
1330         } else {
1331                 self->stats.tx_packets++;
1332                 self->stats.tx_bytes += self->tx_buff.len;
1333         }
1334
1335         /* Check if it's time to change the speed */
1336         if (self->new_speed) {
1337                 smsc_ircc_change_speed(self, self->new_speed);
1338                 self->new_speed = 0;
1339         }
1340
1341         netif_wake_queue(self->netdev);
1342 }
1343
1344 /*
1345  * Function smsc_ircc_dma_receive(self)
1346  *
1347  *    Get ready for receiving a frame. The device will initiate a DMA
1348  *    if it starts to receive a frame.
1349  *
1350  */
1351 static int smsc_ircc_dma_receive(struct smsc_ircc_cb *self)
1352 {
1353         int iobase = self->io.fir_base;
1354 #if 0
1355         /* Turn off chip DMA */
1356         register_bank(iobase, 1);
1357         outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE,
1358              iobase + IRCC_SCE_CFGB);
1359 #endif
1360
1361         /* Disable Tx */
1362         register_bank(iobase, 0);
1363         outb(0x00, iobase + IRCC_LCR_B);
1364
1365         /* Turn off chip DMA */
1366         register_bank(iobase, 1);
1367         outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE,
1368              iobase + IRCC_SCE_CFGB);
1369
1370         self->io.direction = IO_RECV;
1371         self->rx_buff.data = self->rx_buff.head;
1372
1373         /* Set max Rx frame size */
1374         register_bank(iobase, 4);
1375         outb((2050 >> 8) & 0x0f, iobase + IRCC_RX_SIZE_HI);
1376         outb(2050 & 0xff, iobase + IRCC_RX_SIZE_LO);
1377
1378         /* Setup DMA controller */
1379         irda_setup_dma(self->io.dma, self->rx_buff_dma, self->rx_buff.truesize,
1380                        DMA_RX_MODE);
1381
1382         /* Enable burst mode chip Rx DMA */
1383         register_bank(iobase, 1);
1384         outb(inb(iobase + IRCC_SCE_CFGB) | IRCC_CFGB_DMA_ENABLE |
1385              IRCC_CFGB_DMA_BURST, iobase + IRCC_SCE_CFGB);
1386
1387         /* Enable interrupt */
1388         register_bank(iobase, 0);
1389         outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, iobase + IRCC_IER);
1390         outb(IRCC_MASTER_INT_EN, iobase + IRCC_MASTER);
1391
1392         /* Enable receiver */
1393         register_bank(iobase, 0);
1394         outb(IRCC_LCR_B_SCE_RECEIVE | IRCC_LCR_B_SIP_ENABLE,
1395              iobase + IRCC_LCR_B);
1396
1397         return 0;
1398 }
1399
1400 /*
1401  * Function smsc_ircc_dma_receive_complete(self)
1402  *
1403  *    Finished with receiving frames
1404  *
1405  */
1406 static void smsc_ircc_dma_receive_complete(struct smsc_ircc_cb *self)
1407 {
1408         struct sk_buff *skb;
1409         int len, msgcnt, lsr;
1410         int iobase = self->io.fir_base;
1411
1412         register_bank(iobase, 0);
1413
1414         IRDA_DEBUG(3, "%s\n", __FUNCTION__);
1415 #if 0
1416         /* Disable Rx */
1417         register_bank(iobase, 0);
1418         outb(0x00, iobase + IRCC_LCR_B);
1419 #endif
1420         register_bank(iobase, 0);
1421         outb(inb(iobase + IRCC_LSAR) & ~IRCC_LSAR_ADDRESS_MASK, iobase + IRCC_LSAR);
1422         lsr= inb(iobase + IRCC_LSR);
1423         msgcnt = inb(iobase + IRCC_LCR_B) & 0x08;
1424
1425         IRDA_DEBUG(2, "%s: dma count = %d\n", __FUNCTION__,
1426                    get_dma_residue(self->io.dma));
1427
1428         len = self->rx_buff.truesize - get_dma_residue(self->io.dma);
1429
1430         /* Look for errors */
1431         if (lsr & (IRCC_LSR_FRAME_ERROR | IRCC_LSR_CRC_ERROR | IRCC_LSR_SIZE_ERROR)) {
1432                 self->stats.rx_errors++;
1433                 if (lsr & IRCC_LSR_FRAME_ERROR)
1434                         self->stats.rx_frame_errors++;
1435                 if (lsr & IRCC_LSR_CRC_ERROR)
1436                         self->stats.rx_crc_errors++;
1437                 if (lsr & IRCC_LSR_SIZE_ERROR)
1438                         self->stats.rx_length_errors++;
1439                 if (lsr & (IRCC_LSR_UNDERRUN | IRCC_LSR_OVERRUN))
1440                         self->stats.rx_length_errors++;
1441                 return;
1442         }
1443
1444         /* Remove CRC */
1445         len -= self->io.speed < 4000000 ? 2 : 4;
1446
1447         if (len < 2 || len > 2050) {
1448                 IRDA_WARNING("%s(), bogus len=%d\n", __FUNCTION__, len);
1449                 return;
1450         }
1451         IRDA_DEBUG(2, "%s: msgcnt = %d, len=%d\n", __FUNCTION__, msgcnt, len);
1452
1453         skb = dev_alloc_skb(len + 1);
1454         if (!skb) {
1455                 IRDA_WARNING("%s(), memory squeeze, dropping frame.\n",
1456                              __FUNCTION__);
1457                 return;
1458         }
1459         /* Make sure IP header gets aligned */
1460         skb_reserve(skb, 1);
1461
1462         memcpy(skb_put(skb, len), self->rx_buff.data, len);
1463         self->stats.rx_packets++;
1464         self->stats.rx_bytes += len;
1465
1466         skb->dev = self->netdev;
1467         skb_reset_mac_header(skb);
1468         skb->protocol = htons(ETH_P_IRDA);
1469         netif_rx(skb);
1470 }
1471
1472 /*
1473  * Function smsc_ircc_sir_receive (self)
1474  *
1475  *    Receive one frame from the infrared port
1476  *
1477  */
1478 static void smsc_ircc_sir_receive(struct smsc_ircc_cb *self)
1479 {
1480         int boguscount = 0;
1481         int iobase;
1482
1483         IRDA_ASSERT(self != NULL, return;);
1484
1485         iobase = self->io.sir_base;
1486
1487         /*
1488          * Receive all characters in Rx FIFO, unwrap and unstuff them.
1489          * async_unwrap_char will deliver all found frames
1490          */
1491         do {
1492                 async_unwrap_char(self->netdev, &self->stats, &self->rx_buff,
1493                                   inb(iobase + UART_RX));
1494
1495                 /* Make sure we don't stay here to long */
1496                 if (boguscount++ > 32) {
1497                         IRDA_DEBUG(2, "%s(), breaking!\n", __FUNCTION__);
1498                         break;
1499                 }
1500         } while (inb(iobase + UART_LSR) & UART_LSR_DR);
1501 }
1502
1503
1504 /*
1505  * Function smsc_ircc_interrupt (irq, dev_id, regs)
1506  *
1507  *    An interrupt from the chip has arrived. Time to do some work
1508  *
1509  */
1510 static irqreturn_t smsc_ircc_interrupt(int irq, void *dev_id)
1511 {
1512         struct net_device *dev = (struct net_device *) dev_id;
1513         struct smsc_ircc_cb *self;
1514         int iobase, iir, lcra, lsr;
1515         irqreturn_t ret = IRQ_NONE;
1516
1517         if (dev == NULL) {
1518                 printk(KERN_WARNING "%s: irq %d for unknown device.\n",
1519                        driver_name, irq);
1520                 goto irq_ret;
1521         }
1522
1523         self = netdev_priv(dev);
1524         IRDA_ASSERT(self != NULL, return IRQ_NONE;);
1525
1526         /* Serialise the interrupt handler in various CPUs, stop Tx path */
1527         spin_lock(&self->lock);
1528
1529         /* Check if we should use the SIR interrupt handler */
1530         if (self->io.speed <= SMSC_IRCC2_MAX_SIR_SPEED) {
1531                 ret = smsc_ircc_interrupt_sir(dev);
1532                 goto irq_ret_unlock;
1533         }
1534
1535         iobase = self->io.fir_base;
1536
1537         register_bank(iobase, 0);
1538         iir = inb(iobase + IRCC_IIR);
1539         if (iir == 0)
1540                 goto irq_ret_unlock;
1541         ret = IRQ_HANDLED;
1542
1543         /* Disable interrupts */
1544         outb(0, iobase + IRCC_IER);
1545         lcra = inb(iobase + IRCC_LCR_A);
1546         lsr = inb(iobase + IRCC_LSR);
1547
1548         IRDA_DEBUG(2, "%s(), iir = 0x%02x\n", __FUNCTION__, iir);
1549
1550         if (iir & IRCC_IIR_EOM) {
1551                 if (self->io.direction == IO_RECV)
1552                         smsc_ircc_dma_receive_complete(self);
1553                 else
1554                         smsc_ircc_dma_xmit_complete(self);
1555
1556                 smsc_ircc_dma_receive(self);
1557         }
1558
1559         if (iir & IRCC_IIR_ACTIVE_FRAME) {
1560                 /*printk(KERN_WARNING "%s(): Active Frame\n", __FUNCTION__);*/
1561         }
1562
1563         /* Enable interrupts again */
1564
1565         register_bank(iobase, 0);
1566         outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, iobase + IRCC_IER);
1567
1568  irq_ret_unlock:
1569         spin_unlock(&self->lock);
1570  irq_ret:
1571         return ret;
1572 }
1573
1574 /*
1575  * Function irport_interrupt_sir (irq, dev_id)
1576  *
1577  *    Interrupt handler for SIR modes
1578  */
1579 static irqreturn_t smsc_ircc_interrupt_sir(struct net_device *dev)
1580 {
1581         struct smsc_ircc_cb *self = netdev_priv(dev);
1582         int boguscount = 0;
1583         int iobase;
1584         int iir, lsr;
1585
1586         /* Already locked comming here in smsc_ircc_interrupt() */
1587         /*spin_lock(&self->lock);*/
1588
1589         iobase = self->io.sir_base;
1590
1591         iir = inb(iobase + UART_IIR) & UART_IIR_ID;
1592         if (iir == 0)
1593                 return IRQ_NONE;
1594         while (iir) {
1595                 /* Clear interrupt */
1596                 lsr = inb(iobase + UART_LSR);
1597
1598                 IRDA_DEBUG(4, "%s(), iir=%02x, lsr=%02x, iobase=%#x\n",
1599                             __FUNCTION__, iir, lsr, iobase);
1600
1601                 switch (iir) {
1602                 case UART_IIR_RLSI:
1603                         IRDA_DEBUG(2, "%s(), RLSI\n", __FUNCTION__);
1604                         break;
1605                 case UART_IIR_RDI:
1606                         /* Receive interrupt */
1607                         smsc_ircc_sir_receive(self);
1608                         break;
1609                 case UART_IIR_THRI:
1610                         if (lsr & UART_LSR_THRE)
1611                                 /* Transmitter ready for data */
1612                                 smsc_ircc_sir_write_wakeup(self);
1613                         break;
1614                 default:
1615                         IRDA_DEBUG(0, "%s(), unhandled IIR=%#x\n",
1616                                    __FUNCTION__, iir);
1617                         break;
1618                 }
1619
1620                 /* Make sure we don't stay here to long */
1621                 if (boguscount++ > 100)
1622                         break;
1623
1624                 iir = inb(iobase + UART_IIR) & UART_IIR_ID;
1625         }
1626         /*spin_unlock(&self->lock);*/
1627         return IRQ_HANDLED;
1628 }
1629
1630
1631 #if 0 /* unused */
1632 /*
1633  * Function ircc_is_receiving (self)
1634  *
1635  *    Return TRUE is we are currently receiving a frame
1636  *
1637  */
1638 static int ircc_is_receiving(struct smsc_ircc_cb *self)
1639 {
1640         int status = FALSE;
1641         /* int iobase; */
1642
1643         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
1644
1645         IRDA_ASSERT(self != NULL, return FALSE;);
1646
1647         IRDA_DEBUG(0, "%s: dma count = %d\n", __FUNCTION__,
1648                    get_dma_residue(self->io.dma));
1649
1650         status = (self->rx_buff.state != OUTSIDE_FRAME);
1651
1652         return status;
1653 }
1654 #endif /* unused */
1655
1656 static int smsc_ircc_request_irq(struct smsc_ircc_cb *self)
1657 {
1658         int error;
1659
1660         error = request_irq(self->io.irq, smsc_ircc_interrupt, 0,
1661                             self->netdev->name, self->netdev);
1662         if (error)
1663                 IRDA_DEBUG(0, "%s(), unable to allocate irq=%d, err=%d\n",
1664                            __FUNCTION__, self->io.irq, error);
1665
1666         return error;
1667 }
1668
1669 static void smsc_ircc_start_interrupts(struct smsc_ircc_cb *self)
1670 {
1671         unsigned long flags;
1672
1673         spin_lock_irqsave(&self->lock, flags);
1674
1675         self->io.speed = 0;
1676         smsc_ircc_change_speed(self, SMSC_IRCC2_C_IRDA_FALLBACK_SPEED);
1677
1678         spin_unlock_irqrestore(&self->lock, flags);
1679 }
1680
1681 static void smsc_ircc_stop_interrupts(struct smsc_ircc_cb *self)
1682 {
1683         int iobase = self->io.fir_base;
1684         unsigned long flags;
1685
1686         spin_lock_irqsave(&self->lock, flags);
1687
1688         register_bank(iobase, 0);
1689         outb(0, iobase + IRCC_IER);
1690         outb(IRCC_MASTER_RESET, iobase + IRCC_MASTER);
1691         outb(0x00, iobase + IRCC_MASTER);
1692
1693         spin_unlock_irqrestore(&self->lock, flags);
1694 }
1695
1696
1697 /*
1698  * Function smsc_ircc_net_open (dev)
1699  *
1700  *    Start the device
1701  *
1702  */
1703 static int smsc_ircc_net_open(struct net_device *dev)
1704 {
1705         struct smsc_ircc_cb *self;
1706         char hwname[16];
1707
1708         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
1709
1710         IRDA_ASSERT(dev != NULL, return -1;);
1711         self = netdev_priv(dev);
1712         IRDA_ASSERT(self != NULL, return 0;);
1713
1714         if (self->io.suspended) {
1715                 IRDA_DEBUG(0, "%s(), device is suspended\n", __FUNCTION__);
1716                 return -EAGAIN;
1717         }
1718
1719         if (request_irq(self->io.irq, smsc_ircc_interrupt, 0, dev->name,
1720                         (void *) dev)) {
1721                 IRDA_DEBUG(0, "%s(), unable to allocate irq=%d\n",
1722                            __FUNCTION__, self->io.irq);
1723                 return -EAGAIN;
1724         }
1725
1726         smsc_ircc_start_interrupts(self);
1727
1728         /* Give self a hardware name */
1729         /* It would be cool to offer the chip revision here - Jean II */
1730         sprintf(hwname, "SMSC @ 0x%03x", self->io.fir_base);
1731
1732         /*
1733          * Open new IrLAP layer instance, now that everything should be
1734          * initialized properly
1735          */
1736         self->irlap = irlap_open(dev, &self->qos, hwname);
1737
1738         /*
1739          * Always allocate the DMA channel after the IRQ,
1740          * and clean up on failure.
1741          */
1742         if (request_dma(self->io.dma, dev->name)) {
1743                 smsc_ircc_net_close(dev);
1744
1745                 IRDA_WARNING("%s(), unable to allocate DMA=%d\n",
1746                              __FUNCTION__, self->io.dma);
1747                 return -EAGAIN;
1748         }
1749
1750         netif_start_queue(dev);
1751
1752         return 0;
1753 }
1754
1755 /*
1756  * Function smsc_ircc_net_close (dev)
1757  *
1758  *    Stop the device
1759  *
1760  */
1761 static int smsc_ircc_net_close(struct net_device *dev)
1762 {
1763         struct smsc_ircc_cb *self;
1764
1765         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
1766
1767         IRDA_ASSERT(dev != NULL, return -1;);
1768         self = netdev_priv(dev);
1769         IRDA_ASSERT(self != NULL, return 0;);
1770
1771         /* Stop device */
1772         netif_stop_queue(dev);
1773
1774         /* Stop and remove instance of IrLAP */
1775         if (self->irlap)
1776                 irlap_close(self->irlap);
1777         self->irlap = NULL;
1778
1779         smsc_ircc_stop_interrupts(self);
1780
1781         /* if we are called from smsc_ircc_resume we don't have IRQ reserved */
1782         if (!self->io.suspended)
1783                 free_irq(self->io.irq, dev);
1784
1785         disable_dma(self->io.dma);
1786         free_dma(self->io.dma);
1787
1788         return 0;
1789 }
1790
1791 static int smsc_ircc_suspend(struct platform_device *dev, pm_message_t state)
1792 {
1793         struct smsc_ircc_cb *self = platform_get_drvdata(dev);
1794
1795         if (!self->io.suspended) {
1796                 IRDA_DEBUG(1, "%s, Suspending\n", driver_name);
1797
1798                 rtnl_lock();
1799                 if (netif_running(self->netdev)) {
1800                         netif_device_detach(self->netdev);
1801                         smsc_ircc_stop_interrupts(self);
1802                         free_irq(self->io.irq, self->netdev);
1803                         disable_dma(self->io.dma);
1804                 }
1805                 self->io.suspended = 1;
1806                 rtnl_unlock();
1807         }
1808
1809         return 0;
1810 }
1811
1812 static int smsc_ircc_resume(struct platform_device *dev)
1813 {
1814         struct smsc_ircc_cb *self = platform_get_drvdata(dev);
1815
1816         if (self->io.suspended) {
1817                 IRDA_DEBUG(1, "%s, Waking up\n", driver_name);
1818
1819                 rtnl_lock();
1820                 smsc_ircc_init_chip(self);
1821                 if (netif_running(self->netdev)) {
1822                         if (smsc_ircc_request_irq(self)) {
1823                                 /*
1824                                  * Don't fail resume process, just kill this
1825                                  * network interface
1826                                  */
1827                                 unregister_netdevice(self->netdev);
1828                         } else {
1829                                 enable_dma(self->io.dma);
1830                                 smsc_ircc_start_interrupts(self);
1831                                 netif_device_attach(self->netdev);
1832                         }
1833                 }
1834                 self->io.suspended = 0;
1835                 rtnl_unlock();
1836         }
1837         return 0;
1838 }
1839
1840 /*
1841  * Function smsc_ircc_close (self)
1842  *
1843  *    Close driver instance
1844  *
1845  */
1846 static int __exit smsc_ircc_close(struct smsc_ircc_cb *self)
1847 {
1848         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
1849
1850         IRDA_ASSERT(self != NULL, return -1;);
1851
1852         platform_device_unregister(self->pldev);
1853
1854         /* Remove netdevice */
1855         unregister_netdev(self->netdev);
1856
1857         smsc_ircc_stop_interrupts(self);
1858
1859         /* Release the PORTS that this driver is using */
1860         IRDA_DEBUG(0, "%s(), releasing 0x%03x\n",  __FUNCTION__,
1861                    self->io.fir_base);
1862
1863         release_region(self->io.fir_base, self->io.fir_ext);
1864
1865         IRDA_DEBUG(0, "%s(), releasing 0x%03x\n", __FUNCTION__,
1866                    self->io.sir_base);
1867
1868         release_region(self->io.sir_base, self->io.sir_ext);
1869
1870         if (self->tx_buff.head)
1871                 dma_free_coherent(NULL, self->tx_buff.truesize,
1872                                   self->tx_buff.head, self->tx_buff_dma);
1873
1874         if (self->rx_buff.head)
1875                 dma_free_coherent(NULL, self->rx_buff.truesize,
1876                                   self->rx_buff.head, self->rx_buff_dma);
1877
1878         free_netdev(self->netdev);
1879
1880         return 0;
1881 }
1882
1883 static void __exit smsc_ircc_cleanup(void)
1884 {
1885         int i;
1886
1887         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
1888
1889         for (i = 0; i < 2; i++) {
1890                 if (dev_self[i])
1891                         smsc_ircc_close(dev_self[i]);
1892         }
1893
1894         if (pnp_driver_registered)
1895                 pnp_unregister_driver(&smsc_ircc_pnp_driver);
1896
1897         platform_driver_unregister(&smsc_ircc_driver);
1898 }
1899
1900 /*
1901  *      Start SIR operations
1902  *
1903  * This function *must* be called with spinlock held, because it may
1904  * be called from the irq handler (via smsc_ircc_change_speed()). - Jean II
1905  */
1906 void smsc_ircc_sir_start(struct smsc_ircc_cb *self)
1907 {
1908         struct net_device *dev;
1909         int fir_base, sir_base;
1910
1911         IRDA_DEBUG(3, "%s\n", __FUNCTION__);
1912
1913         IRDA_ASSERT(self != NULL, return;);
1914         dev = self->netdev;
1915         IRDA_ASSERT(dev != NULL, return;);
1916         dev->hard_start_xmit = &smsc_ircc_hard_xmit_sir;
1917
1918         fir_base = self->io.fir_base;
1919         sir_base = self->io.sir_base;
1920
1921         /* Reset everything */
1922         outb(IRCC_MASTER_RESET, fir_base + IRCC_MASTER);
1923
1924         #if SMSC_IRCC2_C_SIR_STOP
1925         /*smsc_ircc_sir_stop(self);*/
1926         #endif
1927
1928         register_bank(fir_base, 1);
1929         outb(((inb(fir_base + IRCC_SCE_CFGA) & IRCC_SCE_CFGA_BLOCK_CTRL_BITS_MASK) | IRCC_CFGA_IRDA_SIR_A), fir_base + IRCC_SCE_CFGA);
1930
1931         /* Initialize UART */
1932         outb(UART_LCR_WLEN8, sir_base + UART_LCR);  /* Reset DLAB */
1933         outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), sir_base + UART_MCR);
1934
1935         /* Turn on interrups */
1936         outb(UART_IER_RLSI | UART_IER_RDI |UART_IER_THRI, sir_base + UART_IER);
1937
1938         IRDA_DEBUG(3, "%s() - exit\n", __FUNCTION__);
1939
1940         outb(0x00, fir_base + IRCC_MASTER);
1941 }
1942
1943 #if SMSC_IRCC2_C_SIR_STOP
1944 void smsc_ircc_sir_stop(struct smsc_ircc_cb *self)
1945 {
1946         int iobase;
1947
1948         IRDA_DEBUG(3, "%s\n", __FUNCTION__);
1949         iobase = self->io.sir_base;
1950
1951         /* Reset UART */
1952         outb(0, iobase + UART_MCR);
1953
1954         /* Turn off interrupts */
1955         outb(0, iobase + UART_IER);
1956 }
1957 #endif
1958
1959 /*
1960  * Function smsc_sir_write_wakeup (self)
1961  *
1962  *    Called by the SIR interrupt handler when there's room for more data.
1963  *    If we have more packets to send, we send them here.
1964  *
1965  */
1966 static void smsc_ircc_sir_write_wakeup(struct smsc_ircc_cb *self)
1967 {
1968         int actual = 0;
1969         int iobase;
1970         int fcr;
1971
1972         IRDA_ASSERT(self != NULL, return;);
1973
1974         IRDA_DEBUG(4, "%s\n", __FUNCTION__);
1975
1976         iobase = self->io.sir_base;
1977
1978         /* Finished with frame?  */
1979         if (self->tx_buff.len > 0)  {
1980                 /* Write data left in transmit buffer */
1981                 actual = smsc_ircc_sir_write(iobase, self->io.fifo_size,
1982                                       self->tx_buff.data, self->tx_buff.len);
1983                 self->tx_buff.data += actual;
1984                 self->tx_buff.len  -= actual;
1985         } else {
1986
1987         /*if (self->tx_buff.len ==0)  {*/
1988
1989                 /*
1990                  *  Now serial buffer is almost free & we can start
1991                  *  transmission of another packet. But first we must check
1992                  *  if we need to change the speed of the hardware
1993                  */
1994                 if (self->new_speed) {
1995                         IRDA_DEBUG(5, "%s(), Changing speed to %d.\n",
1996                                    __FUNCTION__, self->new_speed);
1997                         smsc_ircc_sir_wait_hw_transmitter_finish(self);
1998                         smsc_ircc_change_speed(self, self->new_speed);
1999                         self->new_speed = 0;
2000                 } else {
2001                         /* Tell network layer that we want more frames */
2002                         netif_wake_queue(self->netdev);
2003                 }
2004                 self->stats.tx_packets++;
2005
2006                 if (self->io.speed <= 115200) {
2007                         /*
2008                          * Reset Rx FIFO to make sure that all reflected transmit data
2009                          * is discarded. This is needed for half duplex operation
2010                          */
2011                         fcr = UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR;
2012                         fcr |= self->io.speed < 38400 ?
2013                                         UART_FCR_TRIGGER_1 : UART_FCR_TRIGGER_14;
2014
2015                         outb(fcr, iobase + UART_FCR);
2016
2017                         /* Turn on receive interrupts */
2018                         outb(UART_IER_RDI, iobase + UART_IER);
2019                 }
2020         }
2021 }
2022
2023 /*
2024  * Function smsc_ircc_sir_write (iobase, fifo_size, buf, len)
2025  *
2026  *    Fill Tx FIFO with transmit data
2027  *
2028  */
2029 static int smsc_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len)
2030 {
2031         int actual = 0;
2032
2033         /* Tx FIFO should be empty! */
2034         if (!(inb(iobase + UART_LSR) & UART_LSR_THRE)) {
2035                 IRDA_WARNING("%s(), failed, fifo not empty!\n", __FUNCTION__);
2036                 return 0;
2037         }
2038
2039         /* Fill FIFO with current frame */
2040         while (fifo_size-- > 0 && actual < len) {
2041                 /* Transmit next byte */
2042                 outb(buf[actual], iobase + UART_TX);
2043                 actual++;
2044         }
2045         return actual;
2046 }
2047
2048 /*
2049  * Function smsc_ircc_is_receiving (self)
2050  *
2051  *    Returns true is we are currently receiving data
2052  *
2053  */
2054 static int smsc_ircc_is_receiving(struct smsc_ircc_cb *self)
2055 {
2056         return (self->rx_buff.state != OUTSIDE_FRAME);
2057 }
2058
2059
2060 /*
2061  * Function smsc_ircc_probe_transceiver(self)
2062  *
2063  *    Tries to find the used Transceiver
2064  *
2065  */
2066 static void smsc_ircc_probe_transceiver(struct smsc_ircc_cb *self)
2067 {
2068         unsigned int    i;
2069
2070         IRDA_ASSERT(self != NULL, return;);
2071
2072         for (i = 0; smsc_transceivers[i].name != NULL; i++)
2073                 if (smsc_transceivers[i].probe(self->io.fir_base)) {
2074                         IRDA_MESSAGE(" %s transceiver found\n",
2075                                      smsc_transceivers[i].name);
2076                         self->transceiver= i + 1;
2077                         return;
2078                 }
2079
2080         IRDA_MESSAGE("No transceiver found. Defaulting to %s\n",
2081                      smsc_transceivers[SMSC_IRCC2_C_DEFAULT_TRANSCEIVER].name);
2082
2083         self->transceiver = SMSC_IRCC2_C_DEFAULT_TRANSCEIVER;
2084 }
2085
2086
2087 /*
2088  * Function smsc_ircc_set_transceiver_for_speed(self, speed)
2089  *
2090  *    Set the transceiver according to the speed
2091  *
2092  */
2093 static void smsc_ircc_set_transceiver_for_speed(struct smsc_ircc_cb *self, u32 speed)
2094 {
2095         unsigned int trx;
2096
2097         trx = self->transceiver;
2098         if (trx > 0)
2099                 smsc_transceivers[trx - 1].set_for_speed(self->io.fir_base, speed);
2100 }
2101
2102 /*
2103  * Function smsc_ircc_wait_hw_transmitter_finish ()
2104  *
2105  *    Wait for the real end of HW transmission
2106  *
2107  * The UART is a strict FIFO, and we get called only when we have finished
2108  * pushing data to the FIFO, so the maximum amount of time we must wait
2109  * is only for the FIFO to drain out.
2110  *
2111  * We use a simple calibrated loop. We may need to adjust the loop
2112  * delay (udelay) to balance I/O traffic and latency. And we also need to
2113  * adjust the maximum timeout.
2114  * It would probably be better to wait for the proper interrupt,
2115  * but it doesn't seem to be available.
2116  *
2117  * We can't use jiffies or kernel timers because :
2118  * 1) We are called from the interrupt handler, which disable softirqs,
2119  * so jiffies won't be increased
2120  * 2) Jiffies granularity is usually very coarse (10ms), and we don't
2121  * want to wait that long to detect stuck hardware.
2122  * Jean II
2123  */
2124
2125 static void smsc_ircc_sir_wait_hw_transmitter_finish(struct smsc_ircc_cb *self)
2126 {
2127         int iobase = self->io.sir_base;
2128         int count = SMSC_IRCC2_HW_TRANSMITTER_TIMEOUT_US;
2129
2130         /* Calibrated busy loop */
2131         while (count-- > 0 && !(inb(iobase + UART_LSR) & UART_LSR_TEMT))
2132                 udelay(1);
2133
2134         if (count == 0)
2135                 IRDA_DEBUG(0, "%s(): stuck transmitter\n", __FUNCTION__);
2136 }
2137
2138
2139 /* PROBING
2140  *
2141  * REVISIT we can be told about the device by PNP, and should use that info
2142  * instead of probing hardware and creating a platform_device ...
2143  */
2144
2145 static int __init smsc_ircc_look_for_chips(void)
2146 {
2147         struct smsc_chip_address *address;
2148         char *type;
2149         unsigned int cfg_base, found;
2150
2151         found = 0;
2152         address = possible_addresses;
2153
2154         while (address->cfg_base) {
2155                 cfg_base = address->cfg_base;
2156
2157                 /*printk(KERN_WARNING "%s(): probing: 0x%02x for: 0x%02x\n", __FUNCTION__, cfg_base, address->type);*/
2158
2159                 if (address->type & SMSCSIO_TYPE_FDC) {
2160                         type = "FDC";
2161                         if (address->type & SMSCSIO_TYPE_FLAT)
2162                                 if (!smsc_superio_flat(fdc_chips_flat, cfg_base, type))
2163                                         found++;
2164
2165                         if (address->type & SMSCSIO_TYPE_PAGED)
2166                                 if (!smsc_superio_paged(fdc_chips_paged, cfg_base, type))
2167                                         found++;
2168                 }
2169                 if (address->type & SMSCSIO_TYPE_LPC) {
2170                         type = "LPC";
2171                         if (address->type & SMSCSIO_TYPE_FLAT)
2172                                 if (!smsc_superio_flat(lpc_chips_flat, cfg_base, type))
2173                                         found++;
2174
2175                         if (address->type & SMSCSIO_TYPE_PAGED)
2176                                 if (!smsc_superio_paged(lpc_chips_paged, cfg_base, type))
2177                                         found++;
2178                 }
2179                 address++;
2180         }
2181         return found;
2182 }
2183
2184 /*
2185  * Function smsc_superio_flat (chip, base, type)
2186  *
2187  *    Try to get configuration of a smc SuperIO chip with flat register model
2188  *
2189  */
2190 static int __init smsc_superio_flat(const struct smsc_chip *chips, unsigned short cfgbase, char *type)
2191 {
2192         unsigned short firbase, sirbase;
2193         u8 mode, dma, irq;
2194         int ret = -ENODEV;
2195
2196         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
2197
2198         if (smsc_ircc_probe(cfgbase, SMSCSIOFLAT_DEVICEID_REG, chips, type) == NULL)
2199                 return ret;
2200
2201         outb(SMSCSIOFLAT_UARTMODE0C_REG, cfgbase);
2202         mode = inb(cfgbase + 1);
2203
2204         /*printk(KERN_WARNING "%s(): mode: 0x%02x\n", __FUNCTION__, mode);*/
2205
2206         if (!(mode & SMSCSIOFLAT_UART2MODE_VAL_IRDA))
2207                 IRDA_WARNING("%s(): IrDA not enabled\n", __FUNCTION__);
2208
2209         outb(SMSCSIOFLAT_UART2BASEADDR_REG, cfgbase);
2210         sirbase = inb(cfgbase + 1) << 2;
2211
2212         /* FIR iobase */
2213         outb(SMSCSIOFLAT_FIRBASEADDR_REG, cfgbase);
2214         firbase = inb(cfgbase + 1) << 3;
2215
2216         /* DMA */
2217         outb(SMSCSIOFLAT_FIRDMASELECT_REG, cfgbase);
2218         dma = inb(cfgbase + 1) & SMSCSIOFLAT_FIRDMASELECT_MASK;
2219
2220         /* IRQ */
2221         outb(SMSCSIOFLAT_UARTIRQSELECT_REG, cfgbase);
2222         irq = inb(cfgbase + 1) & SMSCSIOFLAT_UART2IRQSELECT_MASK;
2223
2224         IRDA_MESSAGE("%s(): fir: 0x%02x, sir: 0x%02x, dma: %02d, irq: %d, mode: 0x%02x\n", __FUNCTION__, firbase, sirbase, dma, irq, mode);
2225
2226         if (firbase && smsc_ircc_open(firbase, sirbase, dma, irq) == 0)
2227                 ret = 0;
2228
2229         /* Exit configuration */
2230         outb(SMSCSIO_CFGEXITKEY, cfgbase);
2231
2232         return ret;
2233 }
2234
2235 /*
2236  * Function smsc_superio_paged (chip, base, type)
2237  *
2238  *    Try  to get configuration of a smc SuperIO chip with paged register model
2239  *
2240  */
2241 static int __init smsc_superio_paged(const struct smsc_chip *chips, unsigned short cfg_base, char *type)
2242 {
2243         unsigned short fir_io, sir_io;
2244         int ret = -ENODEV;
2245
2246         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
2247
2248         if (smsc_ircc_probe(cfg_base, 0x20, chips, type) == NULL)
2249                 return ret;
2250
2251         /* Select logical device (UART2) */
2252         outb(0x07, cfg_base);
2253         outb(0x05, cfg_base + 1);
2254
2255         /* SIR iobase */
2256         outb(0x60, cfg_base);
2257         sir_io = inb(cfg_base + 1) << 8;
2258         outb(0x61, cfg_base);
2259         sir_io |= inb(cfg_base + 1);
2260
2261         /* Read FIR base */
2262         outb(0x62, cfg_base);
2263         fir_io = inb(cfg_base + 1) << 8;
2264         outb(0x63, cfg_base);
2265         fir_io |= inb(cfg_base + 1);
2266         outb(0x2b, cfg_base); /* ??? */
2267
2268         if (fir_io && smsc_ircc_open(fir_io, sir_io, ircc_dma, ircc_irq) == 0)
2269                 ret = 0;
2270
2271         /* Exit configuration */
2272         outb(SMSCSIO_CFGEXITKEY, cfg_base);
2273
2274         return ret;
2275 }
2276
2277
2278 static int __init smsc_access(unsigned short cfg_base, unsigned char reg)
2279 {
2280         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
2281
2282         outb(reg, cfg_base);
2283         return inb(cfg_base) != reg ? -1 : 0;
2284 }
2285
2286 static const struct smsc_chip * __init smsc_ircc_probe(unsigned short cfg_base, u8 reg, const struct smsc_chip *chip, char *type)
2287 {
2288         u8 devid, xdevid, rev;
2289
2290         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
2291
2292         /* Leave configuration */
2293
2294         outb(SMSCSIO_CFGEXITKEY, cfg_base);
2295
2296         if (inb(cfg_base) == SMSCSIO_CFGEXITKEY)        /* not a smc superio chip */
2297                 return NULL;
2298
2299         outb(reg, cfg_base);
2300
2301         xdevid = inb(cfg_base + 1);
2302
2303         /* Enter configuration */
2304
2305         outb(SMSCSIO_CFGACCESSKEY, cfg_base);
2306
2307         #if 0
2308         if (smsc_access(cfg_base,0x55)) /* send second key and check */
2309                 return NULL;
2310         #endif
2311
2312         /* probe device ID */
2313
2314         if (smsc_access(cfg_base, reg))
2315                 return NULL;
2316
2317         devid = inb(cfg_base + 1);
2318
2319         if (devid == 0 || devid == 0xff)        /* typical values for unused port */
2320                 return NULL;
2321
2322         /* probe revision ID */
2323
2324         if (smsc_access(cfg_base, reg + 1))
2325                 return NULL;
2326
2327         rev = inb(cfg_base + 1);
2328
2329         if (rev >= 128)                 /* i think this will make no sense */
2330                 return NULL;
2331
2332         if (devid == xdevid)            /* protection against false positives */
2333                 return NULL;
2334
2335         /* Check for expected device ID; are there others? */
2336
2337         while (chip->devid != devid) {
2338
2339                 chip++;
2340
2341                 if (chip->name == NULL)
2342                         return NULL;
2343         }
2344
2345         IRDA_MESSAGE("found SMC SuperIO Chip (devid=0x%02x rev=%02X base=0x%04x): %s%s\n",
2346                      devid, rev, cfg_base, type, chip->name);
2347
2348         if (chip->rev > rev) {
2349                 IRDA_MESSAGE("Revision higher than expected\n");
2350                 return NULL;
2351         }
2352
2353         if (chip->flags & NoIRDA)
2354                 IRDA_MESSAGE("chipset does not support IRDA\n");
2355
2356         return chip;
2357 }
2358
2359 static int __init smsc_superio_fdc(unsigned short cfg_base)
2360 {
2361         int ret = -1;
2362
2363         if (!request_region(cfg_base, 2, driver_name)) {
2364                 IRDA_WARNING("%s: can't get cfg_base of 0x%03x\n",
2365                              __FUNCTION__, cfg_base);
2366         } else {
2367                 if (!smsc_superio_flat(fdc_chips_flat, cfg_base, "FDC") ||
2368                     !smsc_superio_paged(fdc_chips_paged, cfg_base, "FDC"))
2369                         ret =  0;
2370
2371                 release_region(cfg_base, 2);
2372         }
2373
2374         return ret;
2375 }
2376
2377 static int __init smsc_superio_lpc(unsigned short cfg_base)
2378 {
2379         int ret = -1;
2380
2381         if (!request_region(cfg_base, 2, driver_name)) {
2382                 IRDA_WARNING("%s: can't get cfg_base of 0x%03x\n",
2383                              __FUNCTION__, cfg_base);
2384         } else {
2385                 if (!smsc_superio_flat(lpc_chips_flat, cfg_base, "LPC") ||
2386                     !smsc_superio_paged(lpc_chips_paged, cfg_base, "LPC"))
2387                         ret = 0;
2388
2389                 release_region(cfg_base, 2);
2390         }
2391         return ret;
2392 }
2393
2394 /*
2395  * Look for some specific subsystem setups that need
2396  * pre-configuration not properly done by the BIOS (especially laptops)
2397  * This code is based in part on smcinit.c, tosh1800-smcinit.c
2398  * and tosh2450-smcinit.c. The table lists the device entries
2399  * for ISA bridges with an LPC (Low Pin Count) controller which
2400  * handles the communication with the SMSC device. After the LPC
2401  * controller is initialized through PCI, the SMSC device is initialized
2402  * through a dedicated port in the ISA port-mapped I/O area, this latter
2403  * area is used to configure the SMSC device with default
2404  * SIR and FIR I/O ports, DMA and IRQ. Different vendors have
2405  * used different sets of parameters and different control port
2406  * addresses making a subsystem device table necessary.
2407  */
2408 #ifdef CONFIG_PCI
2409 #define PCIID_VENDOR_INTEL 0x8086
2410 #define PCIID_VENDOR_ALI 0x10b9
2411 static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __initdata = {
2412         /*
2413          * Subsystems needing entries:
2414          * 0x10b9:0x1533 0x103c:0x0850 HP nx9010 family
2415          * 0x10b9:0x1533 0x0e11:0x005a Compaq nc4000 family
2416          * 0x8086:0x24cc 0x0e11:0x002a HP nx9000 family
2417          */
2418         {
2419                 /* Guessed entry */
2420                 .vendor = PCIID_VENDOR_INTEL, /* Intel 82801DBM LPC bridge */
2421                 .device = 0x24cc,
2422                 .subvendor = 0x103c,
2423                 .subdevice = 0x08bc,
2424                 .sir_io = 0x02f8,
2425                 .fir_io = 0x0130,
2426                 .fir_irq = 0x05,
2427                 .fir_dma = 0x03,
2428                 .cfg_base = 0x004e,
2429                 .preconfigure = preconfigure_through_82801,
2430                 .name = "HP nx5000 family",
2431         },
2432         {
2433                 .vendor = PCIID_VENDOR_INTEL, /* Intel 82801DBM LPC bridge */
2434                 .device = 0x24cc,
2435                 .subvendor = 0x103c,
2436                 .subdevice = 0x088c,
2437                 /* Quite certain these are the same for nc8000 as for nc6000 */
2438                 .sir_io = 0x02f8,
2439                 .fir_io = 0x0130,
2440                 .fir_irq = 0x05,
2441                 .fir_dma = 0x03,
2442                 .cfg_base = 0x004e,
2443                 .preconfigure = preconfigure_through_82801,
2444                 .name = "HP nc8000 family",
2445         },
2446         {
2447                 .vendor = PCIID_VENDOR_INTEL, /* Intel 82801DBM LPC bridge */
2448                 .device = 0x24cc,
2449                 .subvendor = 0x103c,
2450                 .subdevice = 0x0890,
2451                 .sir_io = 0x02f8,
2452                 .fir_io = 0x0130,
2453                 .fir_irq = 0x05,
2454                 .fir_dma = 0x03,
2455                 .cfg_base = 0x004e,
2456                 .preconfigure = preconfigure_through_82801,
2457                 .name = "HP nc6000 family",
2458         },
2459         {
2460                 .vendor = PCIID_VENDOR_INTEL, /* Intel 82801DBM LPC bridge */
2461                 .device = 0x24cc,
2462                 .subvendor = 0x0e11,
2463                 .subdevice = 0x0860,
2464                 /* I assume these are the same for x1000 as for the others */
2465                 .sir_io = 0x02e8,
2466                 .fir_io = 0x02f8,
2467                 .fir_irq = 0x07,
2468                 .fir_dma = 0x03,
2469                 .cfg_base = 0x002e,
2470                 .preconfigure = preconfigure_through_82801,
2471                 .name = "Compaq x1000 family",
2472         },
2473         {
2474                 /* Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge */
2475                 .vendor = PCIID_VENDOR_INTEL,
2476                 .device = 0x24c0,
2477                 .subvendor = 0x1179,
2478                 .subdevice = 0xffff, /* 0xffff is "any" */
2479                 .sir_io = 0x03f8,
2480                 .fir_io = 0x0130,
2481                 .fir_irq = 0x07,
2482                 .fir_dma = 0x01,
2483                 .cfg_base = 0x002e,
2484                 .preconfigure = preconfigure_through_82801,
2485                 .name = "Toshiba laptop with Intel 82801DB/DBL LPC bridge",
2486         },
2487         {
2488                 .vendor = PCIID_VENDOR_INTEL, /* Intel 82801CAM ISA bridge */
2489                 .device = 0x248c,
2490                 .subvendor = 0x1179,
2491                 .subdevice = 0xffff, /* 0xffff is "any" */
2492                 .sir_io = 0x03f8,
2493                 .fir_io = 0x0130,
2494                 .fir_irq = 0x03,
2495                 .fir_dma = 0x03,
2496                 .cfg_base = 0x002e,
2497                 .preconfigure = preconfigure_through_82801,
2498                 .name = "Toshiba laptop with Intel 82801CAM ISA bridge",
2499         },
2500         {
2501                 /* 82801DBM (ICH4-M) LPC Interface Bridge */
2502                 .vendor = PCIID_VENDOR_INTEL,
2503                 .device = 0x24cc,
2504                 .subvendor = 0x1179,
2505                 .subdevice = 0xffff, /* 0xffff is "any" */
2506                 .sir_io = 0x03f8,
2507                 .fir_io = 0x0130,
2508                 .fir_irq = 0x03,
2509                 .fir_dma = 0x03,
2510                 .cfg_base = 0x002e,
2511                 .preconfigure = preconfigure_through_82801,
2512                 .name = "Toshiba laptop with Intel 8281DBM LPC bridge",
2513         },
2514         {
2515                 /* ALi M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+] */
2516                 .vendor = PCIID_VENDOR_ALI,
2517                 .device = 0x1533,
2518                 .subvendor = 0x1179,
2519                 .subdevice = 0xffff, /* 0xffff is "any" */
2520                 .sir_io = 0x02e8,
2521                 .fir_io = 0x02f8,
2522                 .fir_irq = 0x07,
2523                 .fir_dma = 0x03,
2524                 .cfg_base = 0x002e,
2525                 .preconfigure = preconfigure_through_ali,
2526                 .name = "Toshiba laptop with ALi ISA bridge",
2527         },
2528         { } // Terminator
2529 };
2530
2531
2532 /*
2533  * This sets up the basic SMSC parameters
2534  * (FIR port, SIR port, FIR DMA, FIR IRQ)
2535  * through the chip configuration port.
2536  */
2537 static int __init preconfigure_smsc_chip(struct
2538                                          smsc_ircc_subsystem_configuration
2539                                          *conf)
2540 {
2541         unsigned short iobase = conf->cfg_base;
2542         unsigned char tmpbyte;
2543
2544         outb(LPC47N227_CFGACCESSKEY, iobase); // enter configuration state
2545         outb(SMSCSIOFLAT_DEVICEID_REG, iobase); // set for device ID
2546         tmpbyte = inb(iobase +1); // Read device ID
2547         IRDA_DEBUG(0,
2548                    "Detected Chip id: 0x%02x, setting up registers...\n",
2549                    tmpbyte);
2550
2551         /* Disable UART1 and set up SIR I/O port */
2552         outb(0x24, iobase);  // select CR24 - UART1 base addr
2553         outb(0x00, iobase + 1); // disable UART1
2554         outb(SMSCSIOFLAT_UART2BASEADDR_REG, iobase);  // select CR25 - UART2 base addr
2555         outb( (conf->sir_io >> 2), iobase + 1); // bits 2-9 of 0x3f8
2556         tmpbyte = inb(iobase + 1);
2557         if (tmpbyte != (conf->sir_io >> 2) ) {
2558                 IRDA_WARNING("ERROR: could not configure SIR ioport.\n");
2559                 IRDA_WARNING("Try to supply ircc_cfg argument.\n");
2560                 return -ENXIO;
2561         }
2562
2563         /* Set up FIR IRQ channel for UART2 */
2564         outb(SMSCSIOFLAT_UARTIRQSELECT_REG, iobase); // select CR28 - UART1,2 IRQ select
2565         tmpbyte = inb(iobase + 1);
2566         tmpbyte &= SMSCSIOFLAT_UART1IRQSELECT_MASK; // Do not touch the UART1 portion
2567         tmpbyte |= (conf->fir_irq & SMSCSIOFLAT_UART2IRQSELECT_MASK);
2568         outb(tmpbyte, iobase + 1);
2569         tmpbyte = inb(iobase + 1) & SMSCSIOFLAT_UART2IRQSELECT_MASK;
2570         if (tmpbyte != conf->fir_irq) {
2571                 IRDA_WARNING("ERROR: could not configure FIR IRQ channel.\n");
2572                 return -ENXIO;
2573         }
2574
2575         /* Set up FIR I/O port */
2576         outb(SMSCSIOFLAT_FIRBASEADDR_REG, iobase);  // CR2B - SCE (FIR) base addr
2577         outb((conf->fir_io >> 3), iobase + 1);
2578         tmpbyte = inb(iobase + 1);
2579         if (tmpbyte != (conf->fir_io >> 3) ) {
2580                 IRDA_WARNING("ERROR: could not configure FIR I/O port.\n");
2581                 return -ENXIO;
2582         }
2583
2584         /* Set up FIR DMA channel */
2585         outb(SMSCSIOFLAT_FIRDMASELECT_REG, iobase);  // CR2C - SCE (FIR) DMA select
2586         outb((conf->fir_dma & LPC47N227_FIRDMASELECT_MASK), iobase + 1); // DMA
2587         tmpbyte = inb(iobase + 1) & LPC47N227_FIRDMASELECT_MASK;
2588         if (tmpbyte != (conf->fir_dma & LPC47N227_FIRDMASELECT_MASK)) {
2589                 IRDA_WARNING("ERROR: could not configure FIR DMA channel.\n");
2590                 return -ENXIO;
2591         }
2592
2593         outb(SMSCSIOFLAT_UARTMODE0C_REG, iobase);  // CR0C - UART mode
2594         tmpbyte = inb(iobase + 1);
2595         tmpbyte &= ~SMSCSIOFLAT_UART2MODE_MASK |
2596                 SMSCSIOFLAT_UART2MODE_VAL_IRDA;
2597         outb(tmpbyte, iobase + 1); // enable IrDA (HPSIR) mode, high speed
2598
2599         outb(LPC47N227_APMBOOTDRIVE_REG, iobase);  // CR07 - Auto Pwr Mgt/boot drive sel
2600         tmpbyte = inb(iobase + 1);
2601         outb(tmpbyte | LPC47N227_UART2AUTOPWRDOWN_MASK, iobase + 1); // enable UART2 autopower down
2602
2603         /* This one was not part of tosh1800 */
2604         outb(0x0a, iobase);  // CR0a - ecp fifo / ir mux
2605         tmpbyte = inb(iobase + 1);
2606         outb(tmpbyte | 0x40, iobase + 1); // send active device to ir port
2607
2608         outb(LPC47N227_UART12POWER_REG, iobase);  // CR02 - UART 1,2 power
2609         tmpbyte = inb(iobase + 1);
2610         outb(tmpbyte | LPC47N227_UART2POWERDOWN_MASK, iobase + 1); // UART2 power up mode, UART1 power down
2611
2612         outb(LPC47N227_FDCPOWERVALIDCONF_REG, iobase);  // CR00 - FDC Power/valid config cycle
2613         tmpbyte = inb(iobase + 1);
2614         outb(tmpbyte | LPC47N227_VALID_MASK, iobase + 1); // valid config cycle done
2615
2616         outb(LPC47N227_CFGEXITKEY, iobase);  // Exit configuration
2617
2618         return 0;
2619 }
2620
2621 /* 82801CAM generic registers */
2622 #define VID 0x00
2623 #define DID 0x02
2624 #define PIRQ_A_D_ROUT 0x60
2625 #define SIRQ_CNTL 0x64
2626 #define PIRQ_E_H_ROUT 0x68
2627 #define PCI_DMA_C 0x90
2628 /* LPC-specific registers */
2629 #define COM_DEC 0xe0
2630 #define GEN1_DEC 0xe4
2631 #define LPC_EN 0xe6
2632 #define GEN2_DEC 0xec
2633 /*
2634  * Sets up the I/O range using the 82801CAM ISA bridge, 82801DBM LPC bridge
2635  * or Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge.
2636  * They all work the same way!
2637  */
2638 static int __init preconfigure_through_82801(struct pci_dev *dev,
2639                                              struct
2640                                              smsc_ircc_subsystem_configuration
2641                                              *conf)
2642 {
2643         unsigned short tmpword;
2644         unsigned char tmpbyte;
2645
2646         IRDA_MESSAGE("Setting up Intel 82801 controller and SMSC device\n");
2647         /*
2648          * Select the range for the COMA COM port (SIR)
2649          * Register COM_DEC:
2650          * Bit 7: reserved
2651          * Bit 6-4, COMB decode range
2652          * Bit 3: reserved
2653          * Bit 2-0, COMA decode range
2654          *
2655          * Decode ranges:
2656          *   000 = 0x3f8-0x3ff (COM1)
2657          *   001 = 0x2f8-0x2ff (COM2)
2658          *   010 = 0x220-0x227
2659          *   011 = 0x228-0x22f
2660          *   100 = 0x238-0x23f
2661          *   101 = 0x2e8-0x2ef (COM4)
2662          *   110 = 0x338-0x33f
2663          *   111 = 0x3e8-0x3ef (COM3)
2664          */
2665         pci_read_config_byte(dev, COM_DEC, &tmpbyte);
2666         tmpbyte &= 0xf8; /* mask COMA bits */
2667         switch(conf->sir_io) {
2668         case 0x3f8:
2669                 tmpbyte |= 0x00;
2670                 break;
2671         case 0x2f8:
2672                 tmpbyte |= 0x01;
2673                 break;
2674         case 0x220:
2675                 tmpbyte |= 0x02;
2676                 break;
2677         case 0x228:
2678                 tmpbyte |= 0x03;
2679                 break;
2680         case 0x238:
2681                 tmpbyte |= 0x04;
2682                 break;
2683         case 0x2e8:
2684                 tmpbyte |= 0x05;
2685                 break;
2686         case 0x338:
2687                 tmpbyte |= 0x06;
2688                 break;
2689         case 0x3e8:
2690                 tmpbyte |= 0x07;
2691                 break;
2692         default:
2693                 tmpbyte |= 0x01; /* COM2 default */
2694         }
2695         IRDA_DEBUG(1, "COM_DEC (write): 0x%02x\n", tmpbyte);
2696         pci_write_config_byte(dev, COM_DEC, tmpbyte);
2697
2698         /* Enable Low Pin Count interface */
2699         pci_read_config_word(dev, LPC_EN, &tmpword);
2700         /* These seem to be set up at all times,
2701          * just make sure it is properly set.
2702          */
2703         switch(conf->cfg_base) {
2704         case 0x04e:
2705                 tmpword |= 0x2000;
2706                 break;
2707         case 0x02e:
2708                 tmpword |= 0x1000;
2709                 break;
2710         case 0x062:
2711                 tmpword |= 0x0800;
2712                 break;
2713         case 0x060:
2714                 tmpword |= 0x0400;
2715                 break;
2716         default:
2717                 IRDA_WARNING("Uncommon I/O base address: 0x%04x\n",
2718                              conf->cfg_base);
2719                 break;
2720         }
2721         tmpword &= 0xfffd; /* disable LPC COMB */
2722         tmpword |= 0x0001; /* set bit 0 : enable LPC COMA addr range (GEN2) */
2723         IRDA_DEBUG(1, "LPC_EN (write): 0x%04x\n", tmpword);
2724         pci_write_config_word(dev, LPC_EN, tmpword);
2725
2726         /*
2727          * Configure LPC DMA channel
2728          * PCI_DMA_C bits:
2729          * Bit 15-14: DMA channel 7 select
2730          * Bit 13-12: DMA channel 6 select
2731          * Bit 11-10: DMA channel 5 select
2732          * Bit 9-8:   Reserved
2733          * Bit 7-6:   DMA channel 3 select
2734          * Bit 5-4:   DMA channel 2 select
2735          * Bit 3-2:   DMA channel 1 select
2736          * Bit 1-0:   DMA channel 0 select
2737          *  00 = Reserved value
2738          *  01 = PC/PCI DMA
2739          *  10 = Reserved value
2740          *  11 = LPC I/F DMA
2741          */
2742         pci_read_config_word(dev, PCI_DMA_C, &tmpword);
2743         switch(conf->fir_dma) {
2744         case 0x07:
2745                 tmpword |= 0xc000;
2746                 break;
2747         case 0x06:
2748                 tmpword |= 0x3000;
2749                 break;
2750         case 0x05:
2751                 tmpword |= 0x0c00;
2752                 break;
2753         case 0x03:
2754                 tmpword |= 0x00c0;
2755                 break;
2756         case 0x02:
2757                 tmpword |= 0x0030;
2758                 break;
2759         case 0x01:
2760                 tmpword |= 0x000c;
2761                 break;
2762         case 0x00:
2763                 tmpword |= 0x0003;
2764                 break;
2765         default:
2766                 break; /* do not change settings */
2767         }
2768         IRDA_DEBUG(1, "PCI_DMA_C (write): 0x%04x\n", tmpword);
2769         pci_write_config_word(dev, PCI_DMA_C, tmpword);
2770
2771         /*
2772          * GEN2_DEC bits:
2773          * Bit 15-4: Generic I/O range
2774          * Bit 3-1: reserved (read as 0)
2775          * Bit 0: enable GEN2 range on LPC I/F
2776          */
2777         tmpword = conf->fir_io & 0xfff8;
2778         tmpword |= 0x0001;
2779         IRDA_DEBUG(1, "GEN2_DEC (write): 0x%04x\n", tmpword);
2780         pci_write_config_word(dev, GEN2_DEC, tmpword);
2781
2782         /* Pre-configure chip */
2783         return preconfigure_smsc_chip(conf);
2784 }
2785
2786 /*
2787  * Pre-configure a certain port on the ALi 1533 bridge.
2788  * This is based on reverse-engineering since ALi does not
2789  * provide any data sheet for the 1533 chip.
2790  */
2791 static void __init preconfigure_ali_port(struct pci_dev *dev,
2792                                          unsigned short port)
2793 {
2794         unsigned char reg;
2795         /* These bits obviously control the different ports */
2796         unsigned char mask;
2797         unsigned char tmpbyte;
2798
2799         switch(port) {
2800         case 0x0130:
2801         case 0x0178:
2802                 reg = 0xb0;
2803                 mask = 0x80;
2804                 break;
2805         case 0x03f8:
2806                 reg = 0xb4;
2807                 mask = 0x80;
2808                 break;
2809         case 0x02f8:
2810                 reg = 0xb4;
2811                 mask = 0x30;
2812                 break;
2813         case 0x02e8:
2814                 reg = 0xb4;
2815                 mask = 0x08;
2816                 break;
2817         default:
2818                 IRDA_ERROR("Failed to configure unsupported port on ALi 1533 bridge: 0x%04x\n", port);
2819                 return;
2820         }
2821
2822         pci_read_config_byte(dev, reg, &tmpbyte);
2823         /* Turn on the right bits */
2824         tmpbyte |= mask;
2825         pci_write_config_byte(dev, reg, tmpbyte);
2826         IRDA_MESSAGE("Activated ALi 1533 ISA bridge port 0x%04x.\n", port);
2827         return;
2828 }
2829
2830 static int __init preconfigure_through_ali(struct pci_dev *dev,
2831                                            struct
2832                                            smsc_ircc_subsystem_configuration
2833                                            *conf)
2834 {
2835         /* Configure the two ports on the ALi 1533 */
2836         preconfigure_ali_port(dev, conf->sir_io);
2837         preconfigure_ali_port(dev, conf->fir_io);
2838
2839         /* Pre-configure chip */
2840         return preconfigure_smsc_chip(conf);
2841 }
2842
2843 static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg,
2844                                                     unsigned short ircc_fir,
2845                                                     unsigned short ircc_sir,
2846                                                     unsigned char ircc_dma,
2847                                                     unsigned char ircc_irq)
2848 {
2849         struct pci_dev *dev = NULL;
2850         unsigned short ss_vendor = 0x0000;
2851         unsigned short ss_device = 0x0000;
2852         int ret = 0;
2853
2854         dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev);
2855
2856         while (dev != NULL) {
2857                 struct smsc_ircc_subsystem_configuration *conf;
2858
2859                 /*
2860                  * Cache the subsystem vendor/device:
2861                  * some manufacturers fail to set this for all components,
2862                  * so we save it in case there is just 0x0000 0x0000 on the
2863                  * device we want to check.
2864                  */
2865                 if (dev->subsystem_vendor != 0x0000U) {
2866                         ss_vendor = dev->subsystem_vendor;
2867                         ss_device = dev->subsystem_device;
2868                 }
2869                 conf = subsystem_configurations;
2870                 for( ; conf->subvendor; conf++) {
2871                         if(conf->vendor == dev->vendor &&
2872                            conf->device == dev->device &&
2873                            conf->subvendor == ss_vendor &&
2874                            /* Sometimes these are cached values */
2875                            (conf->subdevice == ss_device ||
2876                             conf->subdevice == 0xffff)) {
2877                                 struct smsc_ircc_subsystem_configuration
2878                                         tmpconf;
2879
2880                                 memcpy(&tmpconf, conf,
2881                                        sizeof(struct smsc_ircc_subsystem_configuration));
2882
2883                                 /*
2884                                  * Override the default values with anything
2885                                  * passed in as parameter
2886                                  */
2887                                 if (ircc_cfg != 0)
2888                                         tmpconf.cfg_base = ircc_cfg;
2889                                 if (ircc_fir != 0)
2890                                         tmpconf.fir_io = ircc_fir;
2891                                 if (ircc_sir != 0)
2892                                         tmpconf.sir_io = ircc_sir;
2893                                 if (ircc_dma != DMA_INVAL)
2894                                         tmpconf.fir_dma = ircc_dma;
2895                                 if (ircc_irq != IRQ_INVAL)
2896                                         tmpconf.fir_irq = ircc_irq;
2897
2898                                 IRDA_MESSAGE("Detected unconfigured %s SMSC IrDA chip, pre-configuring device.\n", conf->name);
2899                                 if (conf->preconfigure)
2900                                         ret = conf->preconfigure(dev, &tmpconf);
2901                                 else
2902                                         ret = -ENODEV;
2903                         }
2904                 }
2905                 dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev);
2906         }
2907
2908         return ret;
2909 }
2910 #endif // CONFIG_PCI
2911
2912 /************************************************
2913  *
2914  * Transceivers specific functions
2915  *
2916  ************************************************/
2917
2918
2919 /*
2920  * Function smsc_ircc_set_transceiver_smsc_ircc_atc(fir_base, speed)
2921  *
2922  *    Program transceiver through smsc-ircc ATC circuitry
2923  *
2924  */
2925
2926 static void smsc_ircc_set_transceiver_smsc_ircc_atc(int fir_base, u32 speed)
2927 {
2928         unsigned long jiffies_now, jiffies_timeout;
2929         u8 val;
2930
2931         jiffies_now = jiffies;
2932         jiffies_timeout = jiffies + SMSC_IRCC2_ATC_PROGRAMMING_TIMEOUT_JIFFIES;
2933
2934         /* ATC */
2935         register_bank(fir_base, 4);
2936         outb((inb(fir_base + IRCC_ATC) & IRCC_ATC_MASK) | IRCC_ATC_nPROGREADY|IRCC_ATC_ENABLE,
2937              fir_base + IRCC_ATC);
2938
2939         while ((val = (inb(fir_base + IRCC_ATC) & IRCC_ATC_nPROGREADY)) &&
2940                 !time_after(jiffies, jiffies_timeout))
2941                 /* empty */;
2942
2943         if (val)
2944                 IRDA_WARNING("%s(): ATC: 0x%02x\n", __FUNCTION__,
2945                              inb(fir_base + IRCC_ATC));
2946 }
2947
2948 /*
2949  * Function smsc_ircc_probe_transceiver_smsc_ircc_atc(fir_base)
2950  *
2951  *    Probe transceiver smsc-ircc ATC circuitry
2952  *
2953  */
2954
2955 static int smsc_ircc_probe_transceiver_smsc_ircc_atc(int fir_base)
2956 {
2957         return 0;
2958 }
2959
2960 /*
2961  * Function smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select(self, speed)
2962  *
2963  *    Set transceiver
2964  *
2965  */
2966
2967 static void smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select(int fir_base, u32 speed)
2968 {
2969         u8 fast_mode;
2970
2971         switch (speed) {
2972         default:
2973         case 576000 :
2974                 fast_mode = 0;
2975                 break;
2976         case 1152000 :
2977         case 4000000 :
2978                 fast_mode = IRCC_LCR_A_FAST;
2979                 break;
2980         }
2981         register_bank(fir_base, 0);
2982         outb((inb(fir_base + IRCC_LCR_A) & 0xbf) | fast_mode, fir_base + IRCC_LCR_A);
2983 }
2984
2985 /*
2986  * Function smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select(fir_base)
2987  *
2988  *    Probe transceiver
2989  *
2990  */
2991
2992 static int smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select(int fir_base)
2993 {
2994         return 0;
2995 }
2996
2997 /*
2998  * Function smsc_ircc_set_transceiver_toshiba_sat1800(fir_base, speed)
2999  *
3000  *    Set transceiver
3001  *
3002  */
3003
3004 static void smsc_ircc_set_transceiver_toshiba_sat1800(int fir_base, u32 speed)
3005 {
3006         u8 fast_mode;
3007
3008         switch (speed) {
3009         default:
3010         case 576000 :
3011                 fast_mode = 0;
3012                 break;
3013         case 1152000 :
3014         case 4000000 :
3015                 fast_mode = /*IRCC_LCR_A_FAST |*/ IRCC_LCR_A_GP_DATA;
3016                 break;
3017
3018         }
3019         /* This causes an interrupt */
3020         register_bank(fir_base, 0);
3021         outb((inb(fir_base + IRCC_LCR_A) &  0xbf) | fast_mode, fir_base + IRCC_LCR_A);
3022 }
3023
3024 /*
3025  * Function smsc_ircc_probe_transceiver_toshiba_sat1800(fir_base)
3026  *
3027  *    Probe transceiver
3028  *
3029  */
3030
3031 static int smsc_ircc_probe_transceiver_toshiba_sat1800(int fir_base)
3032 {
3033         return 0;
3034 }
3035
3036
3037 module_init(smsc_ircc_init);
3038 module_exit(smsc_ircc_cleanup);