git.oblomov.eu Git - linux-2.6/blob - drivers/usb/host/uhci-hcd.c

   1 /*
   2  * Universal Host Controller Interface driver for USB.
   3  *
   4  * Maintainer: Alan Stern <stern@rowland.harvard.edu>
   5  *
   6  * (C) Copyright 1999 Linus Torvalds
   7  * (C) Copyright 1999-2002 Johannes Erdfelt, johannes@erdfelt.com
   8  * (C) Copyright 1999 Randy Dunlap
   9  * (C) Copyright 1999 Georg Acher, acher@in.tum.de
  10  * (C) Copyright 1999 Deti Fliegl, deti@fliegl.de
  11  * (C) Copyright 1999 Thomas Sailer, sailer@ife.ee.ethz.ch
  12  * (C) Copyright 1999 Roman Weissgaerber, weissg@vienna.at
  13  * (C) Copyright 2000 Yggdrasil Computing, Inc. (port of new PCI interface
  14  *               support from usb-ohci.c by Adam Richter, adam@yggdrasil.com).
  15  * (C) Copyright 1999 Gregory P. Smith (from usb-ohci.c)
  16  * (C) Copyright 2004 Alan Stern, stern@rowland.harvard.edu
  17  *
  18  * Intel documents this fairly well, and as far as I know there
  19  * are no royalties or anything like that, but even so there are
  20  * people who decided that they want to do the same thing in a
  21  * completely different way.
  22  *
  23  * WARNING! The USB documentation is downright evil. Most of it
  24  * is just crap, written by a committee. You're better off ignoring
  25  * most of it, the important stuff is:
  26  *  - the low-level protocol (fairly simple but lots of small details)
  27  *  - working around the horridness of the rest
  28  */
  29
  30 #include <linux/config.h>
  31 #ifdef CONFIG_USB_DEBUG
  32 #define DEBUG
  33 #else
  34 #undef DEBUG
  35 #endif
  36 #include <linux/module.h>
  37 #include <linux/pci.h>
  38 #include <linux/kernel.h>
  39 #include <linux/init.h>
  40 #include <linux/delay.h>
  41 #include <linux/ioport.h>
  42 #include <linux/sched.h>
  43 #include <linux/slab.h>
  44 #include <linux/smp_lock.h>
  45 #include <linux/errno.h>
  46 #include <linux/unistd.h>
  47 #include <linux/interrupt.h>
  48 #include <linux/spinlock.h>
  49 #include <linux/debugfs.h>
  50 #include <linux/pm.h>
  51 #include <linux/dmapool.h>
  52 #include <linux/dma-mapping.h>
  53 #include <linux/usb.h>
  54 #include <linux/bitops.h>
  55
  56 #include <asm/uaccess.h>
  57 #include <asm/io.h>
  58 #include <asm/irq.h>
  59 #include <asm/system.h>
  60
  61 #include "../core/hcd.h"
  62 #include "uhci-hcd.h"
  63
  64 /*
  65  * Version Information
  66  */
  67 #define DRIVER_VERSION "v2.2"
  68 #define DRIVER_AUTHOR "Linus 'Frodo Rabbit' Torvalds, Johannes Erdfelt, \
  69 Randy Dunlap, Georg Acher, Deti Fliegl, Thomas Sailer, Roman Weissgaerber, \
  70 Alan Stern"
  71 #define DRIVER_DESC "USB Universal Host Controller Interface driver"
  72
  73 /*
  74  * debug = 0, no debugging messages
  75  * debug = 1, dump failed URB's except for stalls
  76  * debug = 2, dump all failed URB's (including stalls)
  77  *            show all queues in /debug/uhci/[pci_addr]
  78  * debug = 3, show all TD's in URB's when dumping
  79  */
  80 #ifdef DEBUG
  81 static int debug = 1;
  82 #else
  83 static int debug = 0;
  84 #endif
  85 module_param(debug, int, S_IRUGO | S_IWUSR);
  86 MODULE_PARM_DESC(debug, "Debug level");
  87 static char *errbuf;
  88 #define ERRBUF_LEN    (32 * 1024)
  89
  90 static kmem_cache_t *uhci_up_cachep;    /* urb_priv */
  91
  92 static void uhci_get_current_frame_number(struct uhci_hcd *uhci);
  93 static void hc_state_transitions(struct uhci_hcd *uhci);
  94
  95 /* If a transfer is still active after this much time, turn off FSBR */
  96 #define IDLE_TIMEOUT    msecs_to_jiffies(50)
  97 #define FSBR_DELAY      msecs_to_jiffies(50)
  98
  99 /* When we timeout an idle transfer for FSBR, we'll switch it over to */
 100 /* depth first traversal. We'll do it in groups of this number of TD's */
 101 /* to make sure it doesn't hog all of the bandwidth */
 102 #define DEPTH_INTERVAL 5
 103
 104 #include "uhci-hub.c"
 105 #include "uhci-debug.c"
 106 #include "uhci-q.c"
 107
 108 static int init_stall_timer(struct usb_hcd *hcd);
 109
 110 static void stall_callback(unsigned long ptr)
 111 {
 112         struct usb_hcd *hcd = (struct usb_hcd *)ptr;
 113         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 114         struct urb_priv *up;
 115         unsigned long flags;
 116
 117         spin_lock_irqsave(&uhci->lock, flags);
 118         uhci_scan_schedule(uhci, NULL);
 119
 120         list_for_each_entry(up, &uhci->urb_list, urb_list) {
 121                 struct urb *u = up->urb;
 122
 123                 spin_lock(&u->lock);
 124
 125                 /* Check if the FSBR timed out */
 126                 if (up->fsbr && !up->fsbr_timeout && time_after_eq(jiffies, up->fsbrtime + IDLE_TIMEOUT))
 127                         uhci_fsbr_timeout(uhci, u);
 128
 129                 spin_unlock(&u->lock);
 130         }
 131
 132         /* Really disable FSBR */
 133         if (!uhci->fsbr && uhci->fsbrtimeout && time_after_eq(jiffies, uhci->fsbrtimeout)) {
 134                 uhci->fsbrtimeout = 0;
 135                 uhci->skel_term_qh->link = UHCI_PTR_TERM;
 136         }
 137
 138         /* Poll for and perform state transitions */
 139         hc_state_transitions(uhci);
 140         if (unlikely(uhci->suspended_ports && uhci->state != UHCI_SUSPENDED))
 141                 uhci_check_ports(uhci);
 142
 143         init_stall_timer(hcd);
 144         spin_unlock_irqrestore(&uhci->lock, flags);
 145 }
 146
 147 static int init_stall_timer(struct usb_hcd *hcd)
 148 {
 149         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 150
 151         init_timer(&uhci->stall_timer);
 152         uhci->stall_timer.function = stall_callback;
 153         uhci->stall_timer.data = (unsigned long)hcd;
 154         uhci->stall_timer.expires = jiffies + msecs_to_jiffies(100);
 155         add_timer(&uhci->stall_timer);
 156
 157         return 0;
 158 }
 159
 160 static irqreturn_t uhci_irq(struct usb_hcd *hcd, struct pt_regs *regs)
 161 {
 162         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 163         unsigned long io_addr = uhci->io_addr;
 164         unsigned short status;
 165
 166         /*
 167          * Read the interrupt status, and write it back to clear the
 168          * interrupt cause.  Contrary to the UHCI specification, the
 169          * "HC Halted" status bit is persistent: it is RO, not R/WC.
 170          */
 171         status = inw(io_addr + USBSTS);
 172         if (!(status & ~USBSTS_HCH))    /* shared interrupt, not mine */
 173                 return IRQ_NONE;
 174         outw(status, io_addr + USBSTS);         /* Clear it */
 175
 176         if (status & ~(USBSTS_USBINT | USBSTS_ERROR | USBSTS_RD)) {
 177                 if (status & USBSTS_HSE)
 178                         dev_err(uhci_dev(uhci), "host system error, "
 179                                         "PCI problems?\n");
 180                 if (status & USBSTS_HCPE)
 181                         dev_err(uhci_dev(uhci), "host controller process "
 182                                         "error, something bad happened!\n");
 183                 if ((status & USBSTS_HCH) && uhci->state > 0) {
 184                         dev_err(uhci_dev(uhci), "host controller halted, "
 185                                         "very bad!\n");
 186                         /* FIXME: Reset the controller, fix the offending TD */
 187                 }
 188         }
 189
 190         if (status & USBSTS_RD)
 191                 uhci->resume_detect = 1;
 192
 193         spin_lock(&uhci->lock);
 194         uhci_scan_schedule(uhci, regs);
 195         spin_unlock(&uhci->lock);
 196
 197         return IRQ_HANDLED;
 198 }
 199
 200 static void reset_hc(struct uhci_hcd *uhci)
 201 {
 202         unsigned long io_addr = uhci->io_addr;
 203
 204         /* Turn off PIRQ, SMI, and all interrupts.  This also turns off
 205          * the BIOS's USB Legacy Support.
 206          */
 207         pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP, 0);
 208         outw(0, uhci->io_addr + USBINTR);
 209
 210         /* Global reset for 50ms */
 211         uhci->state = UHCI_RESET;
 212         outw(USBCMD_GRESET, io_addr + USBCMD);
 213         msleep(50);
 214         outw(0, io_addr + USBCMD);
 215
 216         /* Another 10ms delay */
 217         msleep(10);
 218         uhci->resume_detect = 0;
 219         uhci->is_stopped = UHCI_IS_STOPPED;
 220 }
 221
 222 static void suspend_hc(struct uhci_hcd *uhci)
 223 {
 224         unsigned long io_addr = uhci->io_addr;
 225
 226         dev_dbg(uhci_dev(uhci), "%s\n", __FUNCTION__);
 227         uhci->state = UHCI_SUSPENDED;
 228         uhci->resume_detect = 0;
 229         outw(USBCMD_EGSM, io_addr + USBCMD);
 230
 231         /* FIXME: Wait for the controller to actually stop */
 232         uhci_get_current_frame_number(uhci);
 233         uhci->is_stopped = UHCI_IS_STOPPED;
 234
 235         uhci_scan_schedule(uhci, NULL);
 236 }
 237
 238 static void wakeup_hc(struct uhci_hcd *uhci)
 239 {
 240         unsigned long io_addr = uhci->io_addr;
 241
 242         switch (uhci->state) {
 243                 case UHCI_SUSPENDED:            /* Start the resume */
 244                         dev_dbg(uhci_dev(uhci), "%s\n", __FUNCTION__);
 245
 246                         /* Global resume for >= 20ms */
 247                         outw(USBCMD_FGR | USBCMD_EGSM, io_addr + USBCMD);
 248                         uhci->state = UHCI_RESUMING_1;
 249                         uhci->state_end = jiffies + msecs_to_jiffies(20);
 250                         uhci->is_stopped = 0;
 251                         break;
 252
 253                 case UHCI_RESUMING_1:           /* End global resume */
 254                         uhci->state = UHCI_RESUMING_2;
 255                         outw(0, io_addr + USBCMD);
 256                         /* Falls through */
 257
 258                 case UHCI_RESUMING_2:           /* Wait for EOP to be sent */
 259                         if (inw(io_addr + USBCMD) & USBCMD_FGR)
 260                                 break;
 261
 262                         /* Run for at least 1 second, and
 263                          * mark it configured with a 64-byte max packet */
 264                         uhci->state = UHCI_RUNNING_GRACE;
 265                         uhci->state_end = jiffies + HZ;
 266                         outw(USBCMD_RS | USBCMD_CF | USBCMD_MAXP,
 267                                         io_addr + USBCMD);
 268                         break;
 269
 270                 case UHCI_RUNNING_GRACE:        /* Now allowed to suspend */
 271                         uhci->state = UHCI_RUNNING;
 272                         break;
 273
 274                 default:
 275                         break;
 276         }
 277 }
 278
 279 static int ports_active(struct uhci_hcd *uhci)
 280 {
 281         unsigned long io_addr = uhci->io_addr;
 282         int connection = 0;
 283         int i;
 284
 285         for (i = 0; i < uhci->rh_numports; i++)
 286                 connection |= (inw(io_addr + USBPORTSC1 + i * 2) & USBPORTSC_CCS);
 287
 288         return connection;
 289 }
 290
 291 static int suspend_allowed(struct uhci_hcd *uhci)
 292 {
 293         unsigned long io_addr = uhci->io_addr;
 294         int i;
 295
 296         if (to_pci_dev(uhci_dev(uhci))->vendor != PCI_VENDOR_ID_INTEL)
 297                 return 1;
 298
 299         /* Some of Intel's USB controllers have a bug that causes false
 300          * resume indications if any port has an over current condition.
 301          * To prevent problems, we will not allow a global suspend if
 302          * any ports are OC.
 303          *
 304          * Some motherboards using Intel's chipsets (but not using all
 305          * the USB ports) appear to hardwire the over current inputs active
 306          * to disable the USB ports.
 307          */
 308
 309         /* check for over current condition on any port */
 310         for (i = 0; i < uhci->rh_numports; i++) {
 311                 if (inw(io_addr + USBPORTSC1 + i * 2) & USBPORTSC_OC)
 312                         return 0;
 313         }
 314
 315         return 1;
 316 }
 317
 318 static void hc_state_transitions(struct uhci_hcd *uhci)
 319 {
 320         switch (uhci->state) {
 321                 case UHCI_RUNNING:
 322
 323                         /* global suspend if nothing connected for 1 second */
 324                         if (!ports_active(uhci) && suspend_allowed(uhci)) {
 325                                 uhci->state = UHCI_SUSPENDING_GRACE;
 326                                 uhci->state_end = jiffies + HZ;
 327                         }
 328                         break;
 329
 330                 case UHCI_SUSPENDING_GRACE:
 331                         if (ports_active(uhci))
 332                                 uhci->state = UHCI_RUNNING;
 333                         else if (time_after_eq(jiffies, uhci->state_end))
 334                                 suspend_hc(uhci);
 335                         break;
 336
 337                 case UHCI_SUSPENDED:
 338
 339                         /* wakeup if requested by a device */
 340                         if (uhci->resume_detect)
 341                                 wakeup_hc(uhci);
 342                         break;
 343
 344                 case UHCI_RESUMING_1:
 345                 case UHCI_RESUMING_2:
 346                 case UHCI_RUNNING_GRACE:
 347                         if (time_after_eq(jiffies, uhci->state_end))
 348                                 wakeup_hc(uhci);
 349                         break;
 350
 351                 default:
 352                         break;
 353         }
 354 }
 355
 356 /*
 357  * Store the current frame number in uhci->frame_number if the controller
 358  * is runnning
 359  */
 360 static void uhci_get_current_frame_number(struct uhci_hcd *uhci)
 361 {
 362         if (!uhci->is_stopped)
 363                 uhci->frame_number = inw(uhci->io_addr + USBFRNUM);
 364 }
 365
 366 static int start_hc(struct uhci_hcd *uhci)
 367 {
 368         unsigned long io_addr = uhci->io_addr;
 369         int timeout = 10;
 370
 371         /*
 372          * Reset the HC - this will force us to get a
 373          * new notification of any already connected
 374          * ports due to the virtual disconnect that it
 375          * implies.
 376          */
 377         outw(USBCMD_HCRESET, io_addr + USBCMD);
 378         while (inw(io_addr + USBCMD) & USBCMD_HCRESET) {
 379                 if (--timeout < 0) {
 380                         dev_err(uhci_dev(uhci), "USBCMD_HCRESET timed out!\n");
 381                         return -ETIMEDOUT;
 382                 }
 383                 msleep(1);
 384         }
 385
 386         /* Mark controller as running before we enable interrupts */
 387         uhci_to_hcd(uhci)->state = HC_STATE_RUNNING;
 388
 389         /* Turn on PIRQ and all interrupts */
 390         pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP,
 391                         USBLEGSUP_DEFAULT);
 392         outw(USBINTR_TIMEOUT | USBINTR_RESUME | USBINTR_IOC | USBINTR_SP,
 393                 io_addr + USBINTR);
 394
 395         /* Start at frame 0 */
 396         outw(0, io_addr + USBFRNUM);
 397         outl(uhci->fl->dma_handle, io_addr + USBFLBASEADD);
 398
 399         /* Run and mark it configured with a 64-byte max packet */
 400         uhci->state = UHCI_RUNNING_GRACE;
 401         uhci->state_end = jiffies + HZ;
 402         outw(USBCMD_RS | USBCMD_CF | USBCMD_MAXP, io_addr + USBCMD);
 403         uhci->is_stopped = 0;
 404
 405         return 0;
 406 }
 407
 408 /*
 409  * De-allocate all resources
 410  */
 411 static void release_uhci(struct uhci_hcd *uhci)
 412 {
 413         int i;
 414
 415         for (i = 0; i < UHCI_NUM_SKELQH; i++)
 416                 if (uhci->skelqh[i]) {
 417                         uhci_free_qh(uhci, uhci->skelqh[i]);
 418                         uhci->skelqh[i] = NULL;
 419                 }
 420
 421         if (uhci->term_td) {
 422                 uhci_free_td(uhci, uhci->term_td);
 423                 uhci->term_td = NULL;
 424         }
 425
 426         if (uhci->qh_pool) {
 427                 dma_pool_destroy(uhci->qh_pool);
 428                 uhci->qh_pool = NULL;
 429         }
 430
 431         if (uhci->td_pool) {
 432                 dma_pool_destroy(uhci->td_pool);
 433                 uhci->td_pool = NULL;
 434         }
 435
 436         if (uhci->fl) {
 437                 dma_free_coherent(uhci_dev(uhci), sizeof(*uhci->fl),
 438                                 uhci->fl, uhci->fl->dma_handle);
 439                 uhci->fl = NULL;
 440         }
 441
 442         if (uhci->dentry) {
 443                 debugfs_remove(uhci->dentry);
 444                 uhci->dentry = NULL;
 445         }
 446 }
 447
 448 static int uhci_reset(struct usb_hcd *hcd)
 449 {
 450         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 451
 452         uhci->io_addr = (unsigned long) hcd->rsrc_start;
 453
 454         /* Kick BIOS off this hardware and reset, so we won't get
 455          * interrupts from any previous setup.
 456          */
 457         reset_hc(uhci);
 458         return 0;
 459 }
 460
 461 /*
 462  * Allocate a frame list, and then setup the skeleton
 463  *
 464  * The hardware doesn't really know any difference
 465  * in the queues, but the order does matter for the
 466  * protocols higher up. The order is:
 467  *
 468  *  - any isochronous events handled before any
 469  *    of the queues. We don't do that here, because
 470  *    we'll create the actual TD entries on demand.
 471  *  - The first queue is the interrupt queue.
 472  *  - The second queue is the control queue, split into low- and full-speed
 473  *  - The third queue is bulk queue.
 474  *  - The fourth queue is the bandwidth reclamation queue, which loops back
 475  *    to the full-speed control queue.
 476  */
 477 static int uhci_start(struct usb_hcd *hcd)
 478 {
 479         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 480         int retval = -EBUSY;
 481         int i, port;
 482         unsigned io_size;
 483         dma_addr_t dma_handle;
 484         struct usb_device *udev;
 485         struct dentry *dentry;
 486
 487         io_size = (unsigned) hcd->rsrc_len;
 488
 489         dentry = debugfs_create_file(hcd->self.bus_name, S_IFREG|S_IRUGO|S_IWUSR, uhci_debugfs_root, uhci, &uhci_debug_operations);
 490         if (!dentry) {
 491                 dev_err(uhci_dev(uhci), "couldn't create uhci debugfs entry\n");
 492                 retval = -ENOMEM;
 493                 goto err_create_debug_entry;
 494         }
 495         uhci->dentry = dentry;
 496
 497         uhci->fsbr = 0;
 498         uhci->fsbrtimeout = 0;
 499
 500         spin_lock_init(&uhci->lock);
 501         INIT_LIST_HEAD(&uhci->qh_remove_list);
 502
 503         INIT_LIST_HEAD(&uhci->td_remove_list);
 504
 505         INIT_LIST_HEAD(&uhci->urb_remove_list);
 506
 507         INIT_LIST_HEAD(&uhci->urb_list);
 508
 509         INIT_LIST_HEAD(&uhci->complete_list);
 510
 511         init_waitqueue_head(&uhci->waitqh);
 512
 513         uhci->fl = dma_alloc_coherent(uhci_dev(uhci), sizeof(*uhci->fl),
 514                         &dma_handle, 0);
 515         if (!uhci->fl) {
 516                 dev_err(uhci_dev(uhci), "unable to allocate "
 517                                 "consistent memory for frame list\n");
 518                 goto err_alloc_fl;
 519         }
 520
 521         memset((void *)uhci->fl, 0, sizeof(*uhci->fl));
 522
 523         uhci->fl->dma_handle = dma_handle;
 524
 525         uhci->td_pool = dma_pool_create("uhci_td", uhci_dev(uhci),
 526                         sizeof(struct uhci_td), 16, 0);
 527         if (!uhci->td_pool) {
 528                 dev_err(uhci_dev(uhci), "unable to create td dma_pool\n");
 529                 goto err_create_td_pool;
 530         }
 531
 532         uhci->qh_pool = dma_pool_create("uhci_qh", uhci_dev(uhci),
 533                         sizeof(struct uhci_qh), 16, 0);
 534         if (!uhci->qh_pool) {
 535                 dev_err(uhci_dev(uhci), "unable to create qh dma_pool\n");
 536                 goto err_create_qh_pool;
 537         }
 538
 539         /* Initialize the root hub */
 540
 541         /* UHCI specs says devices must have 2 ports, but goes on to say */
 542         /*  they may have more but give no way to determine how many they */
 543         /*  have. However, according to the UHCI spec, Bit 7 is always set */
 544         /*  to 1. So we try to use this to our advantage */
 545         for (port = 0; port < (io_size - 0x10) / 2; port++) {
 546                 unsigned int portstatus;
 547
 548                 portstatus = inw(uhci->io_addr + 0x10 + (port * 2));
 549                 if (!(portstatus & 0x0080))
 550                         break;
 551         }
 552         if (debug)
 553                 dev_info(uhci_dev(uhci), "detected %d ports\n", port);
 554
 555         /* This is experimental so anything less than 2 or greater than 8 is */
 556         /*  something weird and we'll ignore it */
 557         if (port < 2 || port > UHCI_RH_MAXCHILD) {
 558                 dev_info(uhci_dev(uhci), "port count misdetected? "
 559                                 "forcing to 2 ports\n");
 560                 port = 2;
 561         }
 562
 563         uhci->rh_numports = port;
 564
 565         udev = usb_alloc_dev(NULL, &hcd->self, 0);
 566         if (!udev) {
 567                 dev_err(uhci_dev(uhci), "unable to allocate root hub\n");
 568                 goto err_alloc_root_hub;
 569         }
 570
 571         uhci->term_td = uhci_alloc_td(uhci, udev);
 572         if (!uhci->term_td) {
 573                 dev_err(uhci_dev(uhci), "unable to allocate terminating TD\n");
 574                 goto err_alloc_term_td;
 575         }
 576
 577         for (i = 0; i < UHCI_NUM_SKELQH; i++) {
 578                 uhci->skelqh[i] = uhci_alloc_qh(uhci, udev);
 579                 if (!uhci->skelqh[i]) {
 580                         dev_err(uhci_dev(uhci), "unable to allocate QH\n");
 581                         goto err_alloc_skelqh;
 582                 }
 583         }
 584
 585         /*
 586          * 8 Interrupt queues; link all higher int queues to int1,
 587          * then link int1 to control and control to bulk
 588          */
 589         uhci->skel_int128_qh->link =
 590                         uhci->skel_int64_qh->link =
 591                         uhci->skel_int32_qh->link =
 592                         uhci->skel_int16_qh->link =
 593                         uhci->skel_int8_qh->link =
 594                         uhci->skel_int4_qh->link =
 595                         uhci->skel_int2_qh->link =
 596                         cpu_to_le32(uhci->skel_int1_qh->dma_handle) | UHCI_PTR_QH;
 597         uhci->skel_int1_qh->link = cpu_to_le32(uhci->skel_ls_control_qh->dma_handle) | UHCI_PTR_QH;
 598
 599         uhci->skel_ls_control_qh->link = cpu_to_le32(uhci->skel_fs_control_qh->dma_handle) | UHCI_PTR_QH;
 600         uhci->skel_fs_control_qh->link = cpu_to_le32(uhci->skel_bulk_qh->dma_handle) | UHCI_PTR_QH;
 601         uhci->skel_bulk_qh->link = cpu_to_le32(uhci->skel_term_qh->dma_handle) | UHCI_PTR_QH;
 602
 603         /* This dummy TD is to work around a bug in Intel PIIX controllers */
 604         uhci_fill_td(uhci->term_td, 0, (UHCI_NULL_DATA_SIZE << 21) |
 605                 (0x7f << TD_TOKEN_DEVADDR_SHIFT) | USB_PID_IN, 0);
 606         uhci->term_td->link = cpu_to_le32(uhci->term_td->dma_handle);
 607
 608         uhci->skel_term_qh->link = UHCI_PTR_TERM;
 609         uhci->skel_term_qh->element = cpu_to_le32(uhci->term_td->dma_handle);
 610
 611         /*
 612          * Fill the frame list: make all entries point to the proper
 613          * interrupt queue.
 614          *
 615          * The interrupt queues will be interleaved as evenly as possible.
 616          * There's not much to be done about period-1 interrupts; they have
 617          * to occur in every frame.  But we can schedule period-2 interrupts
 618          * in odd-numbered frames, period-4 interrupts in frames congruent
 619          * to 2 (mod 4), and so on.  This way each frame only has two
 620          * interrupt QHs, which will help spread out bandwidth utilization.
 621          */
 622         for (i = 0; i < UHCI_NUMFRAMES; i++) {
 623                 int irq;
 624
 625                 /*
 626                  * ffs (Find First bit Set) does exactly what we need:
 627                  * 1,3,5,...  => ffs = 0 => use skel_int2_qh = skelqh[6],
 628                  * 2,6,10,... => ffs = 1 => use skel_int4_qh = skelqh[5], etc.
 629                  * ffs > 6 => not on any high-period queue, so use
 630                  *      skel_int1_qh = skelqh[7].
 631                  * Add UHCI_NUMFRAMES to insure at least one bit is set.
 632                  */
 633                 irq = 6 - (int) __ffs(i + UHCI_NUMFRAMES);
 634                 if (irq < 0)
 635                         irq = 7;
 636
 637                 /* Only place we don't use the frame list routines */
 638                 uhci->fl->frame[i] = UHCI_PTR_QH |
 639                                 cpu_to_le32(uhci->skelqh[irq]->dma_handle);
 640         }
 641
 642         /*
 643          * Some architectures require a full mb() to enforce completion of
 644          * the memory writes above before the I/O transfers in start_hc().
 645          */
 646         mb();
 647         if ((retval = start_hc(uhci)) != 0)
 648                 goto err_alloc_skelqh;
 649
 650         init_stall_timer(hcd);
 651
 652         udev->speed = USB_SPEED_FULL;
 653
 654         if (usb_hcd_register_root_hub(udev, hcd) != 0) {
 655                 dev_err(uhci_dev(uhci), "unable to start root hub\n");
 656                 retval = -ENOMEM;
 657                 goto err_start_root_hub;
 658         }
 659
 660         return 0;
 661
 662 /*
 663  * error exits:
 664  */
 665 err_start_root_hub:
 666         reset_hc(uhci);
 667
 668         del_timer_sync(&uhci->stall_timer);
 669
 670 err_alloc_skelqh:
 671         for (i = 0; i < UHCI_NUM_SKELQH; i++)
 672                 if (uhci->skelqh[i]) {
 673                         uhci_free_qh(uhci, uhci->skelqh[i]);
 674                         uhci->skelqh[i] = NULL;
 675                 }
 676
 677         uhci_free_td(uhci, uhci->term_td);
 678         uhci->term_td = NULL;
 679
 680 err_alloc_term_td:
 681         usb_put_dev(udev);
 682
 683 err_alloc_root_hub:
 684         dma_pool_destroy(uhci->qh_pool);
 685         uhci->qh_pool = NULL;
 686
 687 err_create_qh_pool:
 688         dma_pool_destroy(uhci->td_pool);
 689         uhci->td_pool = NULL;
 690
 691 err_create_td_pool:
 692         dma_free_coherent(uhci_dev(uhci), sizeof(*uhci->fl),
 693                         uhci->fl, uhci->fl->dma_handle);
 694         uhci->fl = NULL;
 695
 696 err_alloc_fl:
 697         debugfs_remove(uhci->dentry);
 698         uhci->dentry = NULL;
 699
 700 err_create_debug_entry:
 701         return retval;
 702 }
 703
 704 static void uhci_stop(struct usb_hcd *hcd)
 705 {
 706         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 707
 708         del_timer_sync(&uhci->stall_timer);
 709         reset_hc(uhci);
 710
 711         spin_lock_irq(&uhci->lock);
 712         uhci_scan_schedule(uhci, NULL);
 713         spin_unlock_irq(&uhci->lock);
 714
 715         release_uhci(uhci);
 716 }
 717
 718 #ifdef CONFIG_PM
 719 static int uhci_suspend(struct usb_hcd *hcd, pm_message_t message)
 720 {
 721         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 722
 723         spin_lock_irq(&uhci->lock);
 724
 725         /* Don't try to suspend broken motherboards, reset instead */
 726         if (suspend_allowed(uhci))
 727                 suspend_hc(uhci);
 728         else {
 729                 spin_unlock_irq(&uhci->lock);
 730                 reset_hc(uhci);
 731                 spin_lock_irq(&uhci->lock);
 732                 uhci_scan_schedule(uhci, NULL);
 733         }
 734
 735         spin_unlock_irq(&uhci->lock);
 736         return 0;
 737 }
 738
 739 static int uhci_resume(struct usb_hcd *hcd)
 740 {
 741         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 742         int rc;
 743
 744         pci_set_master(to_pci_dev(uhci_dev(uhci)));
 745
 746         spin_lock_irq(&uhci->lock);
 747
 748         if (uhci->state == UHCI_SUSPENDED) {
 749
 750                 /*
 751                  * Some systems don't maintain the UHCI register values
 752                  * during a PM suspend/resume cycle, so reinitialize
 753                  * the Frame Number, Framelist Base Address, Interrupt
 754                  * Enable, and Legacy Support registers.
 755                  */
 756                 pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP,
 757                                 0);
 758                 outw(uhci->frame_number, uhci->io_addr + USBFRNUM);
 759                 outl(uhci->fl->dma_handle, uhci->io_addr + USBFLBASEADD);
 760                 outw(USBINTR_TIMEOUT | USBINTR_RESUME | USBINTR_IOC |
 761                                 USBINTR_SP, uhci->io_addr + USBINTR);
 762                 uhci->resume_detect = 1;
 763                 pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP,
 764                                 USBLEGSUP_DEFAULT);
 765         } else {
 766                 spin_unlock_irq(&uhci->lock);
 767                 reset_hc(uhci);
 768                 if ((rc = start_hc(uhci)) != 0)
 769                         return rc;
 770                 spin_lock_irq(&uhci->lock);
 771         }
 772         hcd->state = HC_STATE_RUNNING;
 773
 774         spin_unlock_irq(&uhci->lock);
 775         return 0;
 776 }
 777 #endif
 778
 779 /* Wait until all the URBs for a particular device/endpoint are gone */
 780 static void uhci_hcd_endpoint_disable(struct usb_hcd *hcd,
 781                 struct usb_host_endpoint *ep)
 782 {
 783         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 784
 785         wait_event_interruptible(uhci->waitqh, list_empty(&ep->urb_list));
 786 }
 787
 788 static int uhci_hcd_get_frame_number(struct usb_hcd *hcd)
 789 {
 790         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 791         int frame_number;
 792         unsigned long flags;
 793
 794         /* Minimize latency by avoiding the spinlock */
 795         local_irq_save(flags);
 796         rmb();
 797         frame_number = (uhci->is_stopped ? uhci->frame_number :
 798                         inw(uhci->io_addr + USBFRNUM));
 799         local_irq_restore(flags);
 800         return frame_number;
 801 }
 802
 803 static const char hcd_name[] = "uhci_hcd";
 804
 805 static const struct hc_driver uhci_driver = {
 806         .description =          hcd_name,
 807         .product_desc =         "UHCI Host Controller",
 808         .hcd_priv_size =        sizeof(struct uhci_hcd),
 809
 810         /* Generic hardware linkage */
 811         .irq =                  uhci_irq,
 812         .flags =                HCD_USB11,
 813
 814         /* Basic lifecycle operations */
 815         .reset =                uhci_reset,
 816         .start =                uhci_start,
 817 #ifdef CONFIG_PM
 818         .suspend =              uhci_suspend,
 819         .resume =               uhci_resume,
 820 #endif
 821         .stop =                 uhci_stop,
 822
 823         .urb_enqueue =          uhci_urb_enqueue,
 824         .urb_dequeue =          uhci_urb_dequeue,
 825
 826         .endpoint_disable =     uhci_hcd_endpoint_disable,
 827         .get_frame_number =     uhci_hcd_get_frame_number,
 828
 829         .hub_status_data =      uhci_hub_status_data,
 830         .hub_control =          uhci_hub_control,
 831 };
 832
 833 static const struct pci_device_id uhci_pci_ids[] = { {
 834         /* handle any USB UHCI controller */
 835         PCI_DEVICE_CLASS(((PCI_CLASS_SERIAL_USB << 8) | 0x00), ~0),
 836         .driver_data =  (unsigned long) &uhci_driver,
 837         }, { /* end: all zeroes */ }
 838 };
 839
 840 MODULE_DEVICE_TABLE(pci, uhci_pci_ids);
 841
 842 static struct pci_driver uhci_pci_driver = {
 843         .name =         (char *)hcd_name,
 844         .id_table =     uhci_pci_ids,
 845
 846         .probe =        usb_hcd_pci_probe,
 847         .remove =       usb_hcd_pci_remove,
 848
 849 #ifdef  CONFIG_PM
 850         .suspend =      usb_hcd_pci_suspend,
 851         .resume =       usb_hcd_pci_resume,
 852 #endif  /* PM */
 853 };
 854
 855 static int __init uhci_hcd_init(void)
 856 {
 857         int retval = -ENOMEM;
 858
 859         printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION "\n");
 860
 861         if (usb_disabled())
 862                 return -ENODEV;
 863
 864         if (debug) {
 865                 errbuf = kmalloc(ERRBUF_LEN, GFP_KERNEL);
 866                 if (!errbuf)
 867                         goto errbuf_failed;
 868         }
 869
 870         uhci_debugfs_root = debugfs_create_dir("uhci", NULL);
 871         if (!uhci_debugfs_root)
 872                 goto debug_failed;
 873
 874         uhci_up_cachep = kmem_cache_create("uhci_urb_priv",
 875                 sizeof(struct urb_priv), 0, 0, NULL, NULL);
 876         if (!uhci_up_cachep)
 877                 goto up_failed;
 878
 879         retval = pci_register_driver(&uhci_pci_driver);
 880         if (retval)
 881                 goto init_failed;
 882
 883         return 0;
 884
 885 init_failed:
 886         if (kmem_cache_destroy(uhci_up_cachep))
 887                 warn("not all urb_priv's were freed!");
 888
 889 up_failed:
 890         debugfs_remove(uhci_debugfs_root);
 891
 892 debug_failed:
 893         if (errbuf)
 894                 kfree(errbuf);
 895
 896 errbuf_failed:
 897
 898         return retval;
 899 }
 900
 901 static void __exit uhci_hcd_cleanup(void)
 902 {
 903         pci_unregister_driver(&uhci_pci_driver);
 904
 905         if (kmem_cache_destroy(uhci_up_cachep))
 906                 warn("not all urb_priv's were freed!");
 907
 908         debugfs_remove(uhci_debugfs_root);
 909
 910         if (errbuf)
 911                 kfree(errbuf);
 912 }
 913
 914 module_init(uhci_hcd_init);
 915 module_exit(uhci_hcd_cleanup);
 916
 917 MODULE_AUTHOR(DRIVER_AUTHOR);
 918 MODULE_DESCRIPTION(DRIVER_DESC);
 919 MODULE_LICENSE("GPL");