git.oblomov.eu Git - linux-2.6/blob - drivers/ide/pci/aec62xx.c

   1 /*
   2  * linux/drivers/ide/pci/aec62xx.c              Version 0.11    March 27, 2002
   3  *
   4  * Copyright (C) 1999-2002      Andre Hedrick <andre@linux-ide.org>
   5  *
   6  */
   7
   8 #include <linux/module.h>
   9 #include <linux/types.h>
  10 #include <linux/pci.h>
  11 #include <linux/delay.h>
  12 #include <linux/hdreg.h>
  13 #include <linux/ide.h>
  14 #include <linux/init.h>
  15
  16 #include <asm/io.h>
  17
  18 struct chipset_bus_clock_list_entry {
  19         u8 xfer_speed;
  20         u8 chipset_settings;
  21         u8 ultra_settings;
  22 };
  23
  24 static const struct chipset_bus_clock_list_entry aec6xxx_33_base [] = {
  25         {       XFER_UDMA_6,    0x31,   0x07    },
  26         {       XFER_UDMA_5,    0x31,   0x06    },
  27         {       XFER_UDMA_4,    0x31,   0x05    },
  28         {       XFER_UDMA_3,    0x31,   0x04    },
  29         {       XFER_UDMA_2,    0x31,   0x03    },
  30         {       XFER_UDMA_1,    0x31,   0x02    },
  31         {       XFER_UDMA_0,    0x31,   0x01    },
  32
  33         {       XFER_MW_DMA_2,  0x31,   0x00    },
  34         {       XFER_MW_DMA_1,  0x31,   0x00    },
  35         {       XFER_MW_DMA_0,  0x0a,   0x00    },
  36         {       XFER_PIO_4,     0x31,   0x00    },
  37         {       XFER_PIO_3,     0x33,   0x00    },
  38         {       XFER_PIO_2,     0x08,   0x00    },
  39         {       XFER_PIO_1,     0x0a,   0x00    },
  40         {       XFER_PIO_0,     0x00,   0x00    },
  41         {       0,              0x00,   0x00    }
  42 };
  43
  44 static const struct chipset_bus_clock_list_entry aec6xxx_34_base [] = {
  45         {       XFER_UDMA_6,    0x41,   0x06    },
  46         {       XFER_UDMA_5,    0x41,   0x05    },
  47         {       XFER_UDMA_4,    0x41,   0x04    },
  48         {       XFER_UDMA_3,    0x41,   0x03    },
  49         {       XFER_UDMA_2,    0x41,   0x02    },
  50         {       XFER_UDMA_1,    0x41,   0x01    },
  51         {       XFER_UDMA_0,    0x41,   0x01    },
  52
  53         {       XFER_MW_DMA_2,  0x41,   0x00    },
  54         {       XFER_MW_DMA_1,  0x42,   0x00    },
  55         {       XFER_MW_DMA_0,  0x7a,   0x00    },
  56         {       XFER_PIO_4,     0x41,   0x00    },
  57         {       XFER_PIO_3,     0x43,   0x00    },
  58         {       XFER_PIO_2,     0x78,   0x00    },
  59         {       XFER_PIO_1,     0x7a,   0x00    },
  60         {       XFER_PIO_0,     0x70,   0x00    },
  61         {       0,              0x00,   0x00    }
  62 };
  63
  64 #define BUSCLOCK(D)     \
  65         ((struct chipset_bus_clock_list_entry *) pci_get_drvdata((D)))
  66
  67
  68 /*
  69  * TO DO: active tuning and correction of cards without a bios.
  70  */
  71 static u8 pci_bus_clock_list (u8 speed, struct chipset_bus_clock_list_entry * chipset_table)
  72 {
  73         for ( ; chipset_table->xfer_speed ; chipset_table++)
  74                 if (chipset_table->xfer_speed == speed) {
  75                         return chipset_table->chipset_settings;
  76                 }
  77         return chipset_table->chipset_settings;
  78 }
  79
  80 static u8 pci_bus_clock_list_ultra (u8 speed, struct chipset_bus_clock_list_entry * chipset_table)
  81 {
  82         for ( ; chipset_table->xfer_speed ; chipset_table++)
  83                 if (chipset_table->xfer_speed == speed) {
  84                         return chipset_table->ultra_settings;
  85                 }
  86         return chipset_table->ultra_settings;
  87 }
  88
  89 static u8 aec62xx_ratemask (ide_drive_t *drive)
  90 {
  91         ide_hwif_t *hwif        = HWIF(drive);
  92         u8 mode;
  93
  94         switch(hwif->pci_dev->device) {
  95                 case PCI_DEVICE_ID_ARTOP_ATP865:
  96                 case PCI_DEVICE_ID_ARTOP_ATP865R:
  97                         mode = (hwif->INB(((hwif->channel) ?
  98                                         hwif->mate->dma_status :
  99                                         hwif->dma_status)) & 0x10) ? 4 : 3;
 100                         break;
 101                 case PCI_DEVICE_ID_ARTOP_ATP860:
 102                 case PCI_DEVICE_ID_ARTOP_ATP860R:
 103                         mode = 2;
 104                         break;
 105                 case PCI_DEVICE_ID_ARTOP_ATP850UF:
 106                 default:
 107                         return 1;
 108         }
 109
 110         if (!eighty_ninty_three(drive))
 111                 mode = min(mode, (u8)1);
 112         return mode;
 113 }
 114
 115 static int aec6210_tune_chipset (ide_drive_t *drive, u8 xferspeed)
 116 {
 117         ide_hwif_t *hwif        = HWIF(drive);
 118         struct pci_dev *dev     = hwif->pci_dev;
 119         u16 d_conf              = 0;
 120         u8 speed        = ide_rate_filter(aec62xx_ratemask(drive), xferspeed);
 121         u8 ultra = 0, ultra_conf = 0;
 122         u8 tmp0 = 0, tmp1 = 0, tmp2 = 0;
 123         unsigned long flags;
 124
 125         local_irq_save(flags);
 126         /* 0x40|(2*drive->dn): Active, 0x41|(2*drive->dn): Recovery */
 127         pci_read_config_word(dev, 0x40|(2*drive->dn), &d_conf);
 128         tmp0 = pci_bus_clock_list(speed, BUSCLOCK(dev));
 129         d_conf = ((tmp0 & 0xf0) << 4) | (tmp0 & 0xf);
 130         pci_write_config_word(dev, 0x40|(2*drive->dn), d_conf);
 131
 132         tmp1 = 0x00;
 133         tmp2 = 0x00;
 134         pci_read_config_byte(dev, 0x54, &ultra);
 135         tmp1 = ((0x00 << (2*drive->dn)) | (ultra & ~(3 << (2*drive->dn))));
 136         ultra_conf = pci_bus_clock_list_ultra(speed, BUSCLOCK(dev));
 137         tmp2 = ((ultra_conf << (2*drive->dn)) | (tmp1 & ~(3 << (2*drive->dn))));
 138         pci_write_config_byte(dev, 0x54, tmp2);
 139         local_irq_restore(flags);
 140         return(ide_config_drive_speed(drive, speed));
 141 }
 142
 143 static int aec6260_tune_chipset (ide_drive_t *drive, u8 xferspeed)
 144 {
 145         ide_hwif_t *hwif        = HWIF(drive);
 146         struct pci_dev *dev     = hwif->pci_dev;
 147         u8 speed        = ide_rate_filter(aec62xx_ratemask(drive), xferspeed);
 148         u8 unit         = (drive->select.b.unit & 0x01);
 149         u8 tmp1 = 0, tmp2 = 0;
 150         u8 ultra = 0, drive_conf = 0, ultra_conf = 0;
 151         unsigned long flags;
 152
 153         local_irq_save(flags);
 154         /* high 4-bits: Active, low 4-bits: Recovery */
 155         pci_read_config_byte(dev, 0x40|drive->dn, &drive_conf);
 156         drive_conf = pci_bus_clock_list(speed, BUSCLOCK(dev));
 157         pci_write_config_byte(dev, 0x40|drive->dn, drive_conf);
 158
 159         pci_read_config_byte(dev, (0x44|hwif->channel), &ultra);
 160         tmp1 = ((0x00 << (4*unit)) | (ultra & ~(7 << (4*unit))));
 161         ultra_conf = pci_bus_clock_list_ultra(speed, BUSCLOCK(dev));
 162         tmp2 = ((ultra_conf << (4*unit)) | (tmp1 & ~(7 << (4*unit))));
 163         pci_write_config_byte(dev, (0x44|hwif->channel), tmp2);
 164         local_irq_restore(flags);
 165         return(ide_config_drive_speed(drive, speed));
 166 }
 167
 168 static int aec62xx_tune_chipset (ide_drive_t *drive, u8 speed)
 169 {
 170         switch (HWIF(drive)->pci_dev->device) {
 171                 case PCI_DEVICE_ID_ARTOP_ATP865:
 172                 case PCI_DEVICE_ID_ARTOP_ATP865R:
 173                 case PCI_DEVICE_ID_ARTOP_ATP860:
 174                 case PCI_DEVICE_ID_ARTOP_ATP860R:
 175                         return ((int) aec6260_tune_chipset(drive, speed));
 176                 case PCI_DEVICE_ID_ARTOP_ATP850UF:
 177                         return ((int) aec6210_tune_chipset(drive, speed));
 178                 default:
 179                         return -1;
 180         }
 181 }
 182
 183 static int config_chipset_for_dma (ide_drive_t *drive)
 184 {
 185         u8 speed = ide_dma_speed(drive, aec62xx_ratemask(drive));
 186
 187         if (!(speed))
 188                 return 0;
 189
 190         (void) aec62xx_tune_chipset(drive, speed);
 191         return ide_dma_enable(drive);
 192 }
 193
 194 static void aec62xx_tune_drive (ide_drive_t *drive, u8 pio)
 195 {
 196         u8 speed = 0;
 197         u8 new_pio = XFER_PIO_0 + ide_get_best_pio_mode(drive, 255, 5, NULL);
 198
 199         switch(pio) {
 200                 case 5:         speed = new_pio; break;
 201                 case 4:         speed = XFER_PIO_4; break;
 202                 case 3:         speed = XFER_PIO_3; break;
 203                 case 2:         speed = XFER_PIO_2; break;
 204                 case 1:         speed = XFER_PIO_1; break;
 205                 default:        speed = XFER_PIO_0; break;
 206         }
 207         (void) aec62xx_tune_chipset(drive, speed);
 208 }
 209
 210 static int aec62xx_config_drive_xfer_rate (ide_drive_t *drive)
 211 {
 212         ide_hwif_t *hwif        = HWIF(drive);
 213         struct hd_driveid *id   = drive->id;
 214
 215         if ((id->capability & 1) && drive->autodma) {
 216
 217                 if (ide_use_dma(drive)) {
 218                         if (config_chipset_for_dma(drive))
 219                                 return hwif->ide_dma_on(drive);
 220                 }
 221
 222                 goto fast_ata_pio;
 223
 224         } else if ((id->capability & 8) || (id->field_valid & 2)) {
 225 fast_ata_pio:
 226                 aec62xx_tune_drive(drive, 5);
 227                 return hwif->ide_dma_off_quietly(drive);
 228         }
 229         /* IORDY not supported */
 230         return 0;
 231 }
 232
 233 static int aec62xx_irq_timeout (ide_drive_t *drive)
 234 {
 235         ide_hwif_t *hwif        = HWIF(drive);
 236         struct pci_dev *dev     = hwif->pci_dev;
 237
 238         switch(dev->device) {
 239                 case PCI_DEVICE_ID_ARTOP_ATP860:
 240                 case PCI_DEVICE_ID_ARTOP_ATP860R:
 241                 case PCI_DEVICE_ID_ARTOP_ATP865:
 242                 case PCI_DEVICE_ID_ARTOP_ATP865R:
 243                         printk(" AEC62XX time out ");
 244                 default:
 245                         break;
 246         }
 247         return 0;
 248 }
 249
 250 static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const char *name)
 251 {
 252         int bus_speed = system_bus_clock();
 253
 254         if (dev->resource[PCI_ROM_RESOURCE].start) {
 255                 pci_write_config_dword(dev, PCI_ROM_ADDRESS, dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE);
 256                 printk(KERN_INFO "%s: ROM enabled at 0x%08lx\n", name,
 257                         (unsigned long)dev->resource[PCI_ROM_RESOURCE].start);
 258         }
 259
 260         if (bus_speed <= 33)
 261                 pci_set_drvdata(dev, (void *) aec6xxx_33_base);
 262         else
 263                 pci_set_drvdata(dev, (void *) aec6xxx_34_base);
 264
 265         /* These are necessary to get AEC6280 Macintosh cards to work */
 266         if ((dev->device == PCI_DEVICE_ID_ARTOP_ATP865) ||
 267             (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R)) {
 268                 u8 reg49h = 0, reg4ah = 0;
 269                 /* Clear reset and test bits.  */
 270                 pci_read_config_byte(dev, 0x49, &reg49h);
 271                 pci_write_config_byte(dev, 0x49, reg49h & ~0x30);
 272                 /* Enable chip interrupt output.  */
 273                 pci_read_config_byte(dev, 0x4a, &reg4ah);
 274                 pci_write_config_byte(dev, 0x4a, reg4ah & ~0x01);
 275                 /* Enable burst mode. */
 276                 pci_read_config_byte(dev, 0x4a, &reg4ah);
 277                 pci_write_config_byte(dev, 0x4a, reg4ah | 0x80);
 278         }
 279
 280         return dev->irq;
 281 }
 282
 283 static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif)
 284 {
 285         hwif->autodma = 0;
 286         hwif->tuneproc = &aec62xx_tune_drive;
 287         hwif->speedproc = &aec62xx_tune_chipset;
 288
 289         if (hwif->pci_dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) {
 290                 hwif->serialized = hwif->channel;
 291                 hwif->no_dsc = 1;
 292         }
 293
 294         if (hwif->mate)
 295                 hwif->mate->serialized = hwif->serialized;
 296
 297         if (!hwif->dma_base) {
 298                 hwif->drives[0].autotune = 1;
 299                 hwif->drives[1].autotune = 1;
 300                 return;
 301         }
 302
 303         hwif->ultra_mask = 0x7f;
 304         hwif->mwdma_mask = 0x07;
 305         hwif->swdma_mask = 0x07;
 306
 307         hwif->ide_dma_check     = &aec62xx_config_drive_xfer_rate;
 308         hwif->ide_dma_lostirq   = &aec62xx_irq_timeout;
 309         hwif->ide_dma_timeout   = &aec62xx_irq_timeout;
 310         if (!noautodma)
 311                 hwif->autodma = 1;
 312         hwif->drives[0].autodma = hwif->autodma;
 313         hwif->drives[1].autodma = hwif->autodma;
 314 }
 315
 316 static void __devinit init_dma_aec62xx(ide_hwif_t *hwif, unsigned long dmabase)
 317 {
 318         struct pci_dev *dev     = hwif->pci_dev;
 319
 320         if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) {
 321                 u8 reg54h = 0;
 322                 unsigned long flags;
 323
 324                 spin_lock_irqsave(&ide_lock, flags);
 325                 pci_read_config_byte(dev, 0x54, &reg54h);
 326                 pci_write_config_byte(dev, 0x54, reg54h & ~(hwif->channel ? 0xF0 : 0x0F));
 327                 spin_unlock_irqrestore(&ide_lock, flags);
 328         } else {
 329                 u8 ata66        = 0;
 330                 pci_read_config_byte(hwif->pci_dev, 0x49, &ata66);
 331                 if (!(hwif->udma_four))
 332                         hwif->udma_four = (ata66&(hwif->channel?0x02:0x01))?0:1;
 333         }
 334
 335         ide_setup_dma(hwif, dmabase, 8);
 336 }
 337
 338 static int __devinit init_setup_aec62xx(struct pci_dev *dev, ide_pci_device_t *d)
 339 {
 340         return ide_setup_pci_device(dev, d);
 341 }
 342
 343 static int __devinit init_setup_aec6x80(struct pci_dev *dev, ide_pci_device_t *d)
 344 {
 345         unsigned long bar4reg = pci_resource_start(dev, 4);
 346
 347         if (inb(bar4reg+2) & 0x10) {
 348                 strcpy(d->name, "AEC6880");
 349                 if (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R)
 350                         strcpy(d->name, "AEC6880R");
 351         } else {
 352                 strcpy(d->name, "AEC6280");
 353                 if (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R)
 354                         strcpy(d->name, "AEC6280R");
 355         }
 356
 357         return ide_setup_pci_device(dev, d);
 358 }
 359
 360 static ide_pci_device_t aec62xx_chipsets[] __devinitdata = {
 361         {       /* 0 */
 362                 .name           = "AEC6210",
 363                 .init_setup     = init_setup_aec62xx,
 364                 .init_chipset   = init_chipset_aec62xx,
 365                 .init_hwif      = init_hwif_aec62xx,
 366                 .init_dma       = init_dma_aec62xx,
 367                 .channels       = 2,
 368                 .autodma        = AUTODMA,
 369                 .enablebits     = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
 370                 .bootable       = OFF_BOARD,
 371         },{     /* 1 */
 372                 .name           = "AEC6260",
 373                 .init_setup     = init_setup_aec62xx,
 374                 .init_chipset   = init_chipset_aec62xx,
 375                 .init_hwif      = init_hwif_aec62xx,
 376                 .init_dma       = init_dma_aec62xx,
 377                 .channels       = 2,
 378                 .autodma        = NOAUTODMA,
 379                 .bootable       = OFF_BOARD,
 380         },{     /* 2 */
 381                 .name           = "AEC6260R",
 382                 .init_setup     = init_setup_aec62xx,
 383                 .init_chipset   = init_chipset_aec62xx,
 384                 .init_hwif      = init_hwif_aec62xx,
 385                 .init_dma       = init_dma_aec62xx,
 386                 .channels       = 2,
 387                 .autodma        = AUTODMA,
 388                 .enablebits     = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
 389                 .bootable       = NEVER_BOARD,
 390         },{     /* 3 */
 391                 .name           = "AEC6X80",
 392                 .init_setup     = init_setup_aec6x80,
 393                 .init_chipset   = init_chipset_aec62xx,
 394                 .init_hwif      = init_hwif_aec62xx,
 395                 .init_dma       = init_dma_aec62xx,
 396                 .channels       = 2,
 397                 .autodma        = AUTODMA,
 398                 .bootable       = OFF_BOARD,
 399         },{     /* 4 */
 400                 .name           = "AEC6X80R",
 401                 .init_setup     = init_setup_aec6x80,
 402                 .init_chipset   = init_chipset_aec62xx,
 403                 .init_hwif      = init_hwif_aec62xx,
 404                 .init_dma       = init_dma_aec62xx,
 405                 .channels       = 2,
 406                 .autodma        = AUTODMA,
 407                 .enablebits     = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
 408                 .bootable       = OFF_BOARD,
 409         }
 410 };
 411
 412 /**
 413  *      aec62xx_init_one        -       called when a AEC is found
 414  *      @dev: the aec62xx device
 415  *      @id: the matching pci id
 416  *
 417  *      Called when the PCI registration layer (or the IDE initialization)
 418  *      finds a device matching our IDE device tables.
 419  */
 420
 421 static int __devinit aec62xx_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 422 {
 423         ide_pci_device_t *d = &aec62xx_chipsets[id->driver_data];
 424
 425         return d->init_setup(dev, d);
 426 }
 427
 428 static struct pci_device_id aec62xx_pci_tbl[] = {
 429         { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP850UF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
 430         { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP860,   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },
 431         { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP860R,  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 },
 432         { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP865,   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3 },
 433         { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP865R,  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 },
 434         { 0, },
 435 };
 436 MODULE_DEVICE_TABLE(pci, aec62xx_pci_tbl);
 437
 438 static struct pci_driver driver = {
 439         .name           = "AEC62xx_IDE",
 440         .id_table       = aec62xx_pci_tbl,
 441         .probe          = aec62xx_init_one,
 442 };
 443
 444 static int __init aec62xx_ide_init(void)
 445 {
 446         return ide_pci_register_driver(&driver);
 447 }
 448
 449 module_init(aec62xx_ide_init);
 450
 451 MODULE_AUTHOR("Andre Hedrick");
 452 MODULE_DESCRIPTION("PCI driver module for ARTOP AEC62xx IDE");
 453 MODULE_LICENSE("GPL");