2 * s2255drv.c - a driver for the Sensoray 2255 USB video capture device
4 * Copyright (C) 2007-2008 by Sensoray Company Inc.
7 * Some video buffer code based on vivi driver:
9 * Sensoray 2255 device supports 4 simultaneous channels.
10 * The channels are not "crossbar" inputs, they are physically
11 * attached to separate video decoders.
13 * Because of USB2.0 bandwidth limitations. There is only a
14 * certain amount of data which may be transferred at one time.
16 * Example maximum bandwidth utilization:
18 * -full size, color mode YUYV or YUV422P: 2 channels at once
20 * -full or half size Grey scale: all 4 channels at once
22 * -half size, color mode YUYV or YUV422P: all 4 channels at once
24 * -full size, color mode YUYV or YUV422P 1/2 frame rate: all 4 channels
26 * (TODO: Incorporate videodev2 frame rate(FR) enumeration,
27 * which is currently experimental.)
29 * This program is free software; you can redistribute it and/or modify
30 * it under the terms of the GNU General Public License as published by
31 * the Free Software Foundation; either version 2 of the License, or
32 * (at your option) any later version.
34 * This program is distributed in the hope that it will be useful,
35 * but WITHOUT ANY WARRANTY; without even the implied warranty of
36 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
37 * GNU General Public License for more details.
39 * You should have received a copy of the GNU General Public License
40 * along with this program; if not, write to the Free Software
41 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
44 #include <linux/module.h>
45 #include <linux/firmware.h>
46 #include <linux/kernel.h>
47 #include <linux/mutex.h>
48 #include <linux/videodev2.h>
49 #include <linux/version.h>
51 #include <media/videobuf-vmalloc.h>
52 #include <media/v4l2-common.h>
53 #include <media/v4l2-ioctl.h>
54 #include <linux/vmalloc.h>
55 #include <linux/usb.h>
57 #define FIRMWARE_FILE_NAME "f2255usb.bin"
61 /* vendor request in */
63 /* vendor request out */
64 #define S2255_VR_OUT 1
66 #define S2255_VR_FW 0x30
67 /* USB endpoint number for configuring the device */
68 #define S2255_CONFIG_EP 2
69 /* maximum time for DSP to start responding after last FW word loaded(ms) */
70 #define S2255_DSP_BOOTTIME 400
71 /* maximum time to wait for firmware to load (ms) */
72 #define S2255_LOAD_TIMEOUT (5000 + S2255_DSP_BOOTTIME)
73 #define S2255_DEF_BUFS 16
74 #define MAX_CHANNELS 4
75 #define FRAME_MARKER 0x2255DA4AL
76 #define MAX_PIPE_USBBLOCK (40 * 1024)
77 #define DEFAULT_PIPE_USBBLOCK (16 * 1024)
78 #define MAX_CHANNELS 4
79 #define MAX_PIPE_BUFFERS 1
81 /* maximum size is PAL full size plus room for the marker header(s) */
82 #define SYS_FRAMES_MAXSIZE (720 * 288 * 2 * 2 + 4096)
83 #define DEF_USB_BLOCK (4096)
84 #define LINE_SZ_4CIFS_NTSC 640
85 #define LINE_SZ_2CIFS_NTSC 640
86 #define LINE_SZ_1CIFS_NTSC 320
87 #define LINE_SZ_4CIFS_PAL 704
88 #define LINE_SZ_2CIFS_PAL 704
89 #define LINE_SZ_1CIFS_PAL 352
90 #define NUM_LINES_4CIFS_NTSC 240
91 #define NUM_LINES_2CIFS_NTSC 240
92 #define NUM_LINES_1CIFS_NTSC 240
93 #define NUM_LINES_4CIFS_PAL 288
94 #define NUM_LINES_2CIFS_PAL 288
95 #define NUM_LINES_1CIFS_PAL 288
96 #define LINE_SZ_DEF 640
97 #define NUM_LINES_DEF 240
100 /* predefined settings */
101 #define FORMAT_NTSC 1
104 #define SCALE_4CIFS 1 /* 640x480(NTSC) or 704x576(PAL) */
105 #define SCALE_2CIFS 2 /* 640x240(NTSC) or 704x288(PAL) */
106 #define SCALE_1CIFS 3 /* 320x240(NTSC) or 352x288(PAL) */
108 #define COLOR_YUVPL 1 /* YUV planar */
109 #define COLOR_YUVPK 2 /* YUV packed */
110 #define COLOR_Y8 4 /* monochrome */
112 /* frame decimation. Not implemented by V4L yet(experimental in V4L) */
113 #define FDEC_1 1 /* capture every frame. default */
114 #define FDEC_2 2 /* capture every 2nd frame */
115 #define FDEC_3 3 /* capture every 3rd frame */
116 #define FDEC_5 5 /* capture every 5th frame */
118 /*-------------------------------------------------------
119 * Default mode parameters.
120 *-------------------------------------------------------*/
121 #define DEF_SCALE SCALE_4CIFS
122 #define DEF_COLOR COLOR_YUVPL
123 #define DEF_FDEC FDEC_1
125 #define DEF_CONTRAST 0x5c
126 #define DEF_SATURATION 0x80
129 /* usb config commands */
130 #define IN_DATA_TOKEN 0x2255c0de
131 #define CMD_2255 0xc2255000
132 #define CMD_SET_MODE (CMD_2255 | 0x10)
133 #define CMD_START (CMD_2255 | 0x20)
134 #define CMD_STOP (CMD_2255 | 0x30)
135 #define CMD_STATUS (CMD_2255 | 0x40)
138 u32 format; /* input video format (NTSC, PAL) */
139 u32 scale; /* output video scale */
140 u32 color; /* output video color format */
141 u32 fdec; /* frame decimation */
142 u32 bright; /* brightness */
143 u32 contrast; /* contrast */
144 u32 saturation; /* saturation */
145 u32 hue; /* hue (NTSC only)*/
146 u32 single; /* capture 1 frame at a time (!=0), continuously (==0)*/
147 u32 usb_block; /* block size. should be 4096 of DEF_USB_BLOCK */
148 u32 restart; /* if DSP requires restart */
151 /* frame structure */
152 #define FRAME_STATE_UNUSED 0
153 #define FRAME_STATE_FILLING 1
154 #define FRAME_STATE_FULL 2
157 struct s2255_framei {
160 unsigned long ulState; /* ulState ==0 unused, 1 being filled, 2 full */
161 void *lpvbits; /* image data */
162 unsigned long cur_size; /* current data copied to it */
165 /* image buffer structure */
166 struct s2255_bufferi {
167 unsigned long dwFrames; /* number of frames in buffer */
168 struct s2255_framei frame[SYS_FRAMES]; /* array of FRAME structures */
171 #define DEF_MODEI_NTSC_CONT {FORMAT_NTSC, DEF_SCALE, DEF_COLOR, \
172 DEF_FDEC, DEF_BRIGHT, DEF_CONTRAST, DEF_SATURATION, \
173 DEF_HUE, 0, DEF_USB_BLOCK, 0}
175 struct s2255_dmaqueue {
176 struct list_head active;
177 /* thread for acquisition */
178 struct task_struct *kthread;
180 struct s2255_dev *dev;
184 /* for firmware loading, fw_state */
185 #define S2255_FW_NOTLOADED 0
186 #define S2255_FW_LOADED_DSPWAIT 1
187 #define S2255_FW_SUCCESS 2
188 #define S2255_FW_FAILED 3
189 #define S2255_FW_DISCONNECTING 4
197 wait_queue_head_t wait_fw;
198 struct timer_list dsp_wait;
199 const struct firmware *fw;
202 struct s2255_pipeinfo {
203 u32 max_transfer_size;
204 u32 cur_transfer_size;
211 void *dev; /* back pointer to s2255_dev struct*/
218 struct s2255_fmt; /*forward declaration */
222 int users[MAX_CHANNELS];
224 struct mutex open_lock;
225 int resources[MAX_CHANNELS];
226 struct usb_device *udev;
227 struct usb_interface *interface;
230 struct s2255_dmaqueue vidq[MAX_CHANNELS];
231 struct video_device *vdev[MAX_CHANNELS];
232 struct list_head s2255_devlist;
233 struct timer_list timer;
234 struct s2255_fw *fw_data;
237 struct s2255_pipeinfo pipes[MAX_PIPE_BUFFERS];
238 struct s2255_bufferi buffer[MAX_CHANNELS];
239 struct s2255_mode mode[MAX_CHANNELS];
240 const struct s2255_fmt *cur_fmt[MAX_CHANNELS];
241 int cur_frame[MAX_CHANNELS];
242 int last_frame[MAX_CHANNELS];
243 u32 cc; /* current channel */
244 int b_acquire[MAX_CHANNELS];
245 unsigned long req_image_size[MAX_CHANNELS];
246 int bad_payload[MAX_CHANNELS];
247 unsigned long frame_count[MAX_CHANNELS];
252 #define to_s2255_dev(d) container_of(d, struct s2255_dev, kref)
260 /* buffer for one video frame */
261 struct s2255_buffer {
262 /* common v4l buffer stuff -- must be first */
263 struct videobuf_buffer vb;
264 const struct s2255_fmt *fmt;
268 struct s2255_dev *dev;
269 const struct s2255_fmt *fmt;
272 struct videobuf_queue vb_vidq;
273 enum v4l2_buf_type type;
275 /* mode below is the desired mode.
276 mode in s2255_dev is the current mode that was last set */
277 struct s2255_mode mode;
278 int resources[MAX_CHANNELS];
281 #define CUR_USB_FWVER 774 /* current cypress EEPROM firmware version */
282 #define S2255_MAJOR_VERSION 1
283 #define S2255_MINOR_VERSION 13
284 #define S2255_RELEASE 0
285 #define S2255_VERSION KERNEL_VERSION(S2255_MAJOR_VERSION, \
286 S2255_MINOR_VERSION, \
290 #define USB_S2255_VENDOR_ID 0x1943
291 #define USB_S2255_PRODUCT_ID 0x2255
292 #define S2255_NORMS (V4L2_STD_PAL | V4L2_STD_NTSC)
293 /* frame prefix size (sent once every frame) */
294 #define PREFIX_SIZE 512
296 /* Channels on box are in reverse order */
297 static unsigned long G_chnmap[MAX_CHANNELS] = {3, 2, 1, 0};
299 static LIST_HEAD(s2255_devlist);
302 static int *s2255_debug = &debug;
304 static int s2255_start_readpipe(struct s2255_dev *dev);
305 static void s2255_stop_readpipe(struct s2255_dev *dev);
306 static int s2255_start_acquire(struct s2255_dev *dev, unsigned long chn);
307 static int s2255_stop_acquire(struct s2255_dev *dev, unsigned long chn);
308 static void s2255_fillbuff(struct s2255_dev *dev, struct s2255_buffer *buf,
310 static int s2255_set_mode(struct s2255_dev *dev, unsigned long chn,
311 struct s2255_mode *mode);
312 static int s2255_board_shutdown(struct s2255_dev *dev);
313 static void s2255_exit_v4l(struct s2255_dev *dev);
314 static void s2255_fwload_start(struct s2255_dev *dev);
316 #define dprintk(level, fmt, arg...) \
318 if (*s2255_debug >= (level)) { \
319 printk(KERN_DEBUG "s2255: " fmt, ##arg); \
324 static struct usb_driver s2255_driver;
327 /* Declare static vars that will be used as parameters */
328 static unsigned int vid_limit = 16; /* Video memory limit, in Mb */
330 /* start video number */
331 static int video_nr = -1; /* /dev/videoN, -1 for autodetect */
333 module_param(debug, int, 0644);
334 MODULE_PARM_DESC(debug, "Debug level(0-100) default 0");
335 module_param(vid_limit, int, 0644);
336 MODULE_PARM_DESC(vid_limit, "video memory limit(Mb)");
337 module_param(video_nr, int, 0644);
338 MODULE_PARM_DESC(video_nr, "start video minor(-1 default autodetect)");
340 /* USB device table */
341 static struct usb_device_id s2255_table[] = {
342 {USB_DEVICE(USB_S2255_VENDOR_ID, USB_S2255_PRODUCT_ID)},
343 { } /* Terminating entry */
345 MODULE_DEVICE_TABLE(usb, s2255_table);
348 #define BUFFER_TIMEOUT msecs_to_jiffies(400)
350 /* supported controls */
351 static struct v4l2_queryctrl s2255_qctrl[] = {
353 .id = V4L2_CID_BRIGHTNESS,
354 .type = V4L2_CTRL_TYPE_INTEGER,
355 .name = "Brightness",
362 .id = V4L2_CID_CONTRAST,
363 .type = V4L2_CTRL_TYPE_INTEGER,
368 .default_value = DEF_CONTRAST,
371 .id = V4L2_CID_SATURATION,
372 .type = V4L2_CTRL_TYPE_INTEGER,
373 .name = "Saturation",
377 .default_value = DEF_SATURATION,
381 .type = V4L2_CTRL_TYPE_INTEGER,
386 .default_value = DEF_HUE,
391 static int qctl_regs[ARRAY_SIZE(s2255_qctrl)];
394 static const struct s2255_fmt formats[] = {
396 .name = "4:2:2, planar, YUV422P",
397 .fourcc = V4L2_PIX_FMT_YUV422P,
401 .name = "4:2:2, packed, YUYV",
402 .fourcc = V4L2_PIX_FMT_YUYV,
406 .name = "4:2:2, packed, UYVY",
407 .fourcc = V4L2_PIX_FMT_UYVY,
411 .fourcc = V4L2_PIX_FMT_GREY,
416 static int norm_maxw(struct video_device *vdev)
418 return (vdev->current_norm & V4L2_STD_NTSC) ?
419 LINE_SZ_4CIFS_NTSC : LINE_SZ_4CIFS_PAL;
422 static int norm_maxh(struct video_device *vdev)
424 return (vdev->current_norm & V4L2_STD_NTSC) ?
425 (NUM_LINES_1CIFS_NTSC * 2) : (NUM_LINES_1CIFS_PAL * 2);
428 static int norm_minw(struct video_device *vdev)
430 return (vdev->current_norm & V4L2_STD_NTSC) ?
431 LINE_SZ_1CIFS_NTSC : LINE_SZ_1CIFS_PAL;
434 static int norm_minh(struct video_device *vdev)
436 return (vdev->current_norm & V4L2_STD_NTSC) ?
437 (NUM_LINES_1CIFS_NTSC) : (NUM_LINES_1CIFS_PAL);
442 * TODO: fixme: move YUV reordering to hardware
443 * converts 2255 planar format to yuyv or uyvy
445 static void planar422p_to_yuv_packed(const unsigned char *in,
447 int width, int height,
453 unsigned long size = height * width;
455 pY = (unsigned char *)in;
456 pCr = (unsigned char *)in + height * width;
457 pCb = (unsigned char *)in + height * width + (height * width / 2);
458 for (i = 0; i < size * 2; i += 4) {
459 out[i] = (fmt == V4L2_PIX_FMT_YUYV) ? *pY++ : *pCr++;
460 out[i + 1] = (fmt == V4L2_PIX_FMT_YUYV) ? *pCr++ : *pY++;
461 out[i + 2] = (fmt == V4L2_PIX_FMT_YUYV) ? *pY++ : *pCb++;
462 out[i + 3] = (fmt == V4L2_PIX_FMT_YUYV) ? *pCb++ : *pY++;
468 /* kickstarts the firmware loading. from probe
470 static void s2255_timer(unsigned long user_data)
472 struct s2255_fw *data = (struct s2255_fw *)user_data;
473 dprintk(100, "s2255 timer\n");
474 if (usb_submit_urb(data->fw_urb, GFP_ATOMIC) < 0) {
475 printk(KERN_ERR "s2255: can't submit urb\n");
476 atomic_set(&data->fw_state, S2255_FW_FAILED);
477 /* wake up anything waiting for the firmware */
478 wake_up(&data->wait_fw);
483 /* called when DSP is up and running. DSP is guaranteed to
484 be running after S2255_DSP_BOOTTIME */
485 static void s2255_dsp_running(unsigned long user_data)
487 struct s2255_fw *data = (struct s2255_fw *)user_data;
488 dprintk(1, "dsp running\n");
489 atomic_set(&data->fw_state, S2255_FW_SUCCESS);
490 wake_up(&data->wait_fw);
491 printk(KERN_INFO "s2255: firmware loaded successfully\n");
496 /* this loads the firmware asynchronously.
497 Originally this was done synchroously in probe.
498 But it is better to load it asynchronously here than block
499 inside the probe function. Blocking inside probe affects boot time.
500 FW loading is triggered by the timer in the probe function
502 static void s2255_fwchunk_complete(struct urb *urb)
504 struct s2255_fw *data = urb->context;
505 struct usb_device *udev = urb->dev;
507 dprintk(100, "udev %p urb %p", udev, urb);
509 dev_err(&udev->dev, "URB failed with status %d", urb->status);
510 atomic_set(&data->fw_state, S2255_FW_FAILED);
511 /* wake up anything waiting for the firmware */
512 wake_up(&data->wait_fw);
515 if (data->fw_urb == NULL) {
516 dev_err(&udev->dev, "s2255 disconnected\n");
517 atomic_set(&data->fw_state, S2255_FW_FAILED);
518 /* wake up anything waiting for the firmware */
519 wake_up(&data->wait_fw);
522 #define CHUNK_SIZE 512
523 /* all USB transfers must be done with continuous kernel memory.
524 can't allocate more than 128k in current linux kernel, so
525 upload the firmware in chunks
527 if (data->fw_loaded < data->fw_size) {
528 len = (data->fw_loaded + CHUNK_SIZE) > data->fw_size ?
529 data->fw_size % CHUNK_SIZE : CHUNK_SIZE;
531 if (len < CHUNK_SIZE)
532 memset(data->pfw_data, 0, CHUNK_SIZE);
534 dprintk(100, "completed len %d, loaded %d \n", len,
537 memcpy(data->pfw_data,
538 (char *) data->fw->data + data->fw_loaded, len);
540 usb_fill_bulk_urb(data->fw_urb, udev, usb_sndbulkpipe(udev, 2),
541 data->pfw_data, CHUNK_SIZE,
542 s2255_fwchunk_complete, data);
543 if (usb_submit_urb(data->fw_urb, GFP_ATOMIC) < 0) {
544 dev_err(&udev->dev, "failed submit URB\n");
545 atomic_set(&data->fw_state, S2255_FW_FAILED);
546 /* wake up anything waiting for the firmware */
547 wake_up(&data->wait_fw);
550 data->fw_loaded += len;
552 init_timer(&data->dsp_wait);
553 data->dsp_wait.function = s2255_dsp_running;
554 data->dsp_wait.data = (unsigned long)data;
555 atomic_set(&data->fw_state, S2255_FW_LOADED_DSPWAIT);
556 mod_timer(&data->dsp_wait, msecs_to_jiffies(S2255_DSP_BOOTTIME)
559 dprintk(100, "2255 complete done\n");
564 static int s2255_got_frame(struct s2255_dev *dev, int chn)
566 struct s2255_dmaqueue *dma_q = &dev->vidq[chn];
567 struct s2255_buffer *buf;
568 unsigned long flags = 0;
570 dprintk(2, "wakeup: %p channel: %d\n", &dma_q, chn);
571 spin_lock_irqsave(&dev->slock, flags);
573 if (list_empty(&dma_q->active)) {
574 dprintk(1, "No active queue to serve\n");
578 buf = list_entry(dma_q->active.next,
579 struct s2255_buffer, vb.queue);
581 if (!waitqueue_active(&buf->vb.done)) {
586 list_del(&buf->vb.queue);
587 do_gettimeofday(&buf->vb.ts);
588 dprintk(100, "[%p/%d] wakeup\n", buf, buf->vb.i);
590 s2255_fillbuff(dev, buf, dma_q->channel);
591 wake_up(&buf->vb.done);
592 dprintk(2, "wakeup [buf/i] [%p/%d]\n", buf, buf->vb.i);
594 spin_unlock_irqrestore(&dev->slock, flags);
599 static const struct s2255_fmt *format_by_fourcc(int fourcc)
603 for (i = 0; i < ARRAY_SIZE(formats); i++) {
604 if (-1 == formats[i].fourcc)
606 if (formats[i].fourcc == fourcc)
615 /* video buffer vmalloc implementation based partly on VIVI driver which is
616 * Copyright (c) 2006 by
617 * Mauro Carvalho Chehab <mchehab--a.t--infradead.org>
618 * Ted Walther <ted--a.t--enumera.com>
619 * John Sokol <sokol--a.t--videotechnology.com>
620 * http://v4l.videotechnology.com/
623 static void s2255_fillbuff(struct s2255_dev *dev, struct s2255_buffer *buf,
629 char *vbuf = videobuf_to_vmalloc(&buf->vb);
630 unsigned long last_frame;
631 struct s2255_framei *frm;
636 last_frame = dev->last_frame[chn];
637 if (last_frame != -1) {
638 frm = &dev->buffer[chn].frame[last_frame];
640 (const char *)dev->buffer[chn].frame[last_frame].lpvbits;
641 switch (buf->fmt->fourcc) {
642 case V4L2_PIX_FMT_YUYV:
643 case V4L2_PIX_FMT_UYVY:
644 planar422p_to_yuv_packed((const unsigned char *)tmpbuf,
649 case V4L2_PIX_FMT_GREY:
650 memcpy(vbuf, tmpbuf, buf->vb.width * buf->vb.height);
652 case V4L2_PIX_FMT_YUV422P:
654 buf->vb.width * buf->vb.height * 2);
657 printk(KERN_DEBUG "s2255: unknown format?\n");
659 dev->last_frame[chn] = -1;
660 /* done with the frame, free it */
662 dprintk(4, "freeing buffer\n");
664 printk(KERN_ERR "s2255: =======no frame\n");
668 dprintk(2, "s2255fill at : Buffer 0x%08lx size= %d\n",
669 (unsigned long)vbuf, pos);
670 /* tell v4l buffer was filled */
672 buf->vb.field_count++;
673 do_gettimeofday(&ts);
675 buf->vb.state = VIDEOBUF_DONE;
679 /* ------------------------------------------------------------------
681 ------------------------------------------------------------------*/
683 static int buffer_setup(struct videobuf_queue *vq, unsigned int *count,
686 struct s2255_fh *fh = vq->priv_data;
688 *size = fh->width * fh->height * (fh->fmt->depth >> 3);
691 *count = S2255_DEF_BUFS;
693 while (*size * (*count) > vid_limit * 1024 * 1024)
699 static void free_buffer(struct videobuf_queue *vq, struct s2255_buffer *buf)
701 dprintk(4, "%s\n", __func__);
703 videobuf_waiton(&buf->vb, 0, 0);
704 videobuf_vmalloc_free(&buf->vb);
705 buf->vb.state = VIDEOBUF_NEEDS_INIT;
708 static int buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb,
709 enum v4l2_field field)
711 struct s2255_fh *fh = vq->priv_data;
712 struct s2255_buffer *buf = container_of(vb, struct s2255_buffer, vb);
714 dprintk(4, "%s, field=%d\n", __func__, field);
718 if ((fh->width < norm_minw(fh->dev->vdev[fh->channel])) ||
719 (fh->width > norm_maxw(fh->dev->vdev[fh->channel])) ||
720 (fh->height < norm_minh(fh->dev->vdev[fh->channel])) ||
721 (fh->height > norm_maxh(fh->dev->vdev[fh->channel]))) {
722 dprintk(4, "invalid buffer prepare\n");
726 buf->vb.size = fh->width * fh->height * (fh->fmt->depth >> 3);
728 if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size) {
729 dprintk(4, "invalid buffer prepare\n");
734 buf->vb.width = fh->width;
735 buf->vb.height = fh->height;
736 buf->vb.field = field;
739 if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
740 rc = videobuf_iolock(vq, &buf->vb, NULL);
745 buf->vb.state = VIDEOBUF_PREPARED;
748 free_buffer(vq, buf);
752 static void buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
754 struct s2255_buffer *buf = container_of(vb, struct s2255_buffer, vb);
755 struct s2255_fh *fh = vq->priv_data;
756 struct s2255_dev *dev = fh->dev;
757 struct s2255_dmaqueue *vidq = &dev->vidq[fh->channel];
759 dprintk(1, "%s\n", __func__);
761 buf->vb.state = VIDEOBUF_QUEUED;
762 list_add_tail(&buf->vb.queue, &vidq->active);
765 static void buffer_release(struct videobuf_queue *vq,
766 struct videobuf_buffer *vb)
768 struct s2255_buffer *buf = container_of(vb, struct s2255_buffer, vb);
769 struct s2255_fh *fh = vq->priv_data;
770 dprintk(4, "%s %d\n", __func__, fh->channel);
771 free_buffer(vq, buf);
774 static struct videobuf_queue_ops s2255_video_qops = {
775 .buf_setup = buffer_setup,
776 .buf_prepare = buffer_prepare,
777 .buf_queue = buffer_queue,
778 .buf_release = buffer_release,
782 static int res_get(struct s2255_dev *dev, struct s2255_fh *fh)
785 mutex_lock(&dev->lock);
786 if (dev->resources[fh->channel]) {
787 /* no, someone else uses it */
788 mutex_unlock(&dev->lock);
791 /* it's free, grab it */
792 dev->resources[fh->channel] = 1;
793 fh->resources[fh->channel] = 1;
794 dprintk(1, "s2255: res: get\n");
795 mutex_unlock(&dev->lock);
799 static int res_locked(struct s2255_dev *dev, struct s2255_fh *fh)
801 return dev->resources[fh->channel];
804 static int res_check(struct s2255_fh *fh)
806 return fh->resources[fh->channel];
810 static void res_free(struct s2255_dev *dev, struct s2255_fh *fh)
812 mutex_lock(&dev->lock);
813 dev->resources[fh->channel] = 0;
814 fh->resources[fh->channel] = 0;
815 mutex_unlock(&dev->lock);
816 dprintk(1, "res: put\n");
820 static int vidioc_querycap(struct file *file, void *priv,
821 struct v4l2_capability *cap)
823 struct s2255_fh *fh = file->private_data;
824 struct s2255_dev *dev = fh->dev;
825 strlcpy(cap->driver, "s2255", sizeof(cap->driver));
826 strlcpy(cap->card, "s2255", sizeof(cap->card));
827 strlcpy(cap->bus_info, dev_name(&dev->udev->dev),
828 sizeof(cap->bus_info));
829 cap->version = S2255_VERSION;
830 cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
834 static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv,
835 struct v4l2_fmtdesc *f)
841 if (index >= ARRAY_SIZE(formats))
844 dprintk(4, "name %s\n", formats[index].name);
845 strlcpy(f->description, formats[index].name, sizeof(f->description));
846 f->pixelformat = formats[index].fourcc;
850 static int vidioc_g_fmt_vid_cap(struct file *file, void *priv,
851 struct v4l2_format *f)
853 struct s2255_fh *fh = priv;
855 f->fmt.pix.width = fh->width;
856 f->fmt.pix.height = fh->height;
857 f->fmt.pix.field = fh->vb_vidq.field;
858 f->fmt.pix.pixelformat = fh->fmt->fourcc;
859 f->fmt.pix.bytesperline = f->fmt.pix.width * (fh->fmt->depth >> 3);
860 f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline;
864 static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
865 struct v4l2_format *f)
867 const struct s2255_fmt *fmt;
868 enum v4l2_field field;
870 struct s2255_fh *fh = priv;
871 struct s2255_dev *dev = fh->dev;
875 (dev->vdev[fh->channel]->current_norm & V4L2_STD_NTSC) ? 1 : 0;
877 fmt = format_by_fourcc(f->fmt.pix.pixelformat);
882 field = f->fmt.pix.field;
883 if (field == V4L2_FIELD_ANY)
886 dprintk(4, "try format %d \n", is_ntsc);
887 /* supports 3 sizes. see s2255drv.h */
888 dprintk(50, "width test %d, height %d\n",
889 f->fmt.pix.width, f->fmt.pix.height);
892 if (f->fmt.pix.height >= NUM_LINES_1CIFS_NTSC * 2) {
893 f->fmt.pix.height = NUM_LINES_1CIFS_NTSC * 2;
895 field = V4L2_FIELD_SEQ_TB;
896 } else if (!((field == V4L2_FIELD_INTERLACED) ||
897 (field == V4L2_FIELD_SEQ_TB) ||
898 (field == V4L2_FIELD_INTERLACED_TB))) {
899 dprintk(1, "unsupported field setting\n");
903 f->fmt.pix.height = NUM_LINES_1CIFS_NTSC;
905 field = V4L2_FIELD_TOP;
906 } else if (!((field == V4L2_FIELD_TOP) ||
907 (field == V4L2_FIELD_BOTTOM))) {
908 dprintk(1, "unsupported field setting\n");
913 if (f->fmt.pix.width >= LINE_SZ_4CIFS_NTSC)
914 f->fmt.pix.width = LINE_SZ_4CIFS_NTSC;
915 else if (f->fmt.pix.width >= LINE_SZ_2CIFS_NTSC)
916 f->fmt.pix.width = LINE_SZ_2CIFS_NTSC;
917 else if (f->fmt.pix.width >= LINE_SZ_1CIFS_NTSC)
918 f->fmt.pix.width = LINE_SZ_1CIFS_NTSC;
920 f->fmt.pix.width = LINE_SZ_1CIFS_NTSC;
923 if (f->fmt.pix.height >= NUM_LINES_1CIFS_PAL * 2) {
924 f->fmt.pix.height = NUM_LINES_1CIFS_PAL * 2;
926 field = V4L2_FIELD_SEQ_TB;
927 } else if (!((field == V4L2_FIELD_INTERLACED) ||
928 (field == V4L2_FIELD_SEQ_TB) ||
929 (field == V4L2_FIELD_INTERLACED_TB))) {
930 dprintk(1, "unsupported field setting\n");
934 f->fmt.pix.height = NUM_LINES_1CIFS_PAL;
936 field = V4L2_FIELD_TOP;
937 } else if (!((field == V4L2_FIELD_TOP) ||
938 (field == V4L2_FIELD_BOTTOM))) {
939 dprintk(1, "unsupported field setting\n");
943 if (f->fmt.pix.width >= LINE_SZ_4CIFS_PAL) {
944 dprintk(50, "pal 704\n");
945 f->fmt.pix.width = LINE_SZ_4CIFS_PAL;
946 field = V4L2_FIELD_SEQ_TB;
947 } else if (f->fmt.pix.width >= LINE_SZ_2CIFS_PAL) {
948 dprintk(50, "pal 352A\n");
949 f->fmt.pix.width = LINE_SZ_2CIFS_PAL;
950 field = V4L2_FIELD_TOP;
951 } else if (f->fmt.pix.width >= LINE_SZ_1CIFS_PAL) {
952 dprintk(50, "pal 352B\n");
953 f->fmt.pix.width = LINE_SZ_1CIFS_PAL;
954 field = V4L2_FIELD_TOP;
956 dprintk(50, "pal 352C\n");
957 f->fmt.pix.width = LINE_SZ_1CIFS_PAL;
958 field = V4L2_FIELD_TOP;
962 dprintk(50, "width %d height %d field %d \n", f->fmt.pix.width,
963 f->fmt.pix.height, f->fmt.pix.field);
964 f->fmt.pix.field = field;
965 f->fmt.pix.bytesperline = (f->fmt.pix.width * fmt->depth) >> 3;
966 f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline;
970 static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
971 struct v4l2_format *f)
973 struct s2255_fh *fh = priv;
974 const struct s2255_fmt *fmt;
975 struct videobuf_queue *q = &fh->vb_vidq;
979 ret = vidioc_try_fmt_vid_cap(file, fh, f);
984 fmt = format_by_fourcc(f->fmt.pix.pixelformat);
989 mutex_lock(&q->vb_lock);
991 if (videobuf_queue_is_busy(&fh->vb_vidq)) {
992 dprintk(1, "queue busy\n");
997 if (res_locked(fh->dev, fh)) {
998 dprintk(1, "can't change format after started\n");
1004 fh->width = f->fmt.pix.width;
1005 fh->height = f->fmt.pix.height;
1006 fh->vb_vidq.field = f->fmt.pix.field;
1008 norm = norm_minw(fh->dev->vdev[fh->channel]);
1009 if (fh->width > norm_minw(fh->dev->vdev[fh->channel])) {
1010 if (fh->height > norm_minh(fh->dev->vdev[fh->channel]))
1011 fh->mode.scale = SCALE_4CIFS;
1013 fh->mode.scale = SCALE_2CIFS;
1016 fh->mode.scale = SCALE_1CIFS;
1020 switch (fh->fmt->fourcc) {
1021 case V4L2_PIX_FMT_GREY:
1022 fh->mode.color = COLOR_Y8;
1024 case V4L2_PIX_FMT_YUV422P:
1025 fh->mode.color = COLOR_YUVPL;
1027 case V4L2_PIX_FMT_YUYV:
1028 case V4L2_PIX_FMT_UYVY:
1030 fh->mode.color = COLOR_YUVPK;
1035 mutex_unlock(&q->vb_lock);
1039 static int vidioc_reqbufs(struct file *file, void *priv,
1040 struct v4l2_requestbuffers *p)
1043 struct s2255_fh *fh = priv;
1044 rc = videobuf_reqbufs(&fh->vb_vidq, p);
1048 static int vidioc_querybuf(struct file *file, void *priv, struct v4l2_buffer *p)
1051 struct s2255_fh *fh = priv;
1052 rc = videobuf_querybuf(&fh->vb_vidq, p);
1056 static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *p)
1059 struct s2255_fh *fh = priv;
1060 rc = videobuf_qbuf(&fh->vb_vidq, p);
1064 static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p)
1067 struct s2255_fh *fh = priv;
1068 rc = videobuf_dqbuf(&fh->vb_vidq, p, file->f_flags & O_NONBLOCK);
1072 #ifdef CONFIG_VIDEO_V4L1_COMPAT
1073 static int vidioc_cgmbuf(struct file *file, void *priv, struct video_mbuf *mbuf)
1075 struct s2255_fh *fh = priv;
1077 return videobuf_cgmbuf(&fh->vb_vidq, mbuf, 8);
1081 /* write to the configuration pipe, synchronously */
1082 static int s2255_write_config(struct usb_device *udev, unsigned char *pbuf,
1089 pipe = usb_sndbulkpipe(udev, S2255_CONFIG_EP);
1090 retval = usb_bulk_msg(udev, pipe, pbuf, size, &done, 500);
1095 static u32 get_transfer_size(struct s2255_mode *mode)
1097 int linesPerFrame = LINE_SZ_DEF;
1098 int pixelsPerLine = NUM_LINES_DEF;
1101 unsigned int mask_mult;
1106 if (mode->format == FORMAT_NTSC) {
1107 switch (mode->scale) {
1109 linesPerFrame = NUM_LINES_4CIFS_NTSC * 2;
1110 pixelsPerLine = LINE_SZ_4CIFS_NTSC;
1113 linesPerFrame = NUM_LINES_2CIFS_NTSC;
1114 pixelsPerLine = LINE_SZ_2CIFS_NTSC;
1117 linesPerFrame = NUM_LINES_1CIFS_NTSC;
1118 pixelsPerLine = LINE_SZ_1CIFS_NTSC;
1123 } else if (mode->format == FORMAT_PAL) {
1124 switch (mode->scale) {
1126 linesPerFrame = NUM_LINES_4CIFS_PAL * 2;
1127 pixelsPerLine = LINE_SZ_4CIFS_PAL;
1130 linesPerFrame = NUM_LINES_2CIFS_PAL;
1131 pixelsPerLine = LINE_SZ_2CIFS_PAL;
1134 linesPerFrame = NUM_LINES_1CIFS_PAL;
1135 pixelsPerLine = LINE_SZ_1CIFS_PAL;
1141 outImageSize = linesPerFrame * pixelsPerLine;
1142 if (mode->color != COLOR_Y8) {
1143 /* 2 bytes/pixel if not monochrome */
1147 /* total bytes to send including prefix and 4K padding;
1148 must be a multiple of USB_READ_SIZE */
1149 usbInSize = outImageSize + PREFIX_SIZE; /* always send prefix */
1150 mask_mult = 0xffffffffUL - DEF_USB_BLOCK + 1;
1151 /* if size not a multiple of USB_READ_SIZE */
1152 if (usbInSize & ~mask_mult)
1153 usbInSize = (usbInSize & mask_mult) + (DEF_USB_BLOCK);
1157 static void dump_verify_mode(struct s2255_dev *sdev, struct s2255_mode *mode)
1159 struct device *dev = &sdev->udev->dev;
1160 dev_info(dev, "------------------------------------------------\n");
1161 dev_info(dev, "verify mode\n");
1162 dev_info(dev, "format: %d\n", mode->format);
1163 dev_info(dev, "scale: %d\n", mode->scale);
1164 dev_info(dev, "fdec: %d\n", mode->fdec);
1165 dev_info(dev, "color: %d\n", mode->color);
1166 dev_info(dev, "bright: 0x%x\n", mode->bright);
1167 dev_info(dev, "restart: 0x%x\n", mode->restart);
1168 dev_info(dev, "usb_block: 0x%x\n", mode->usb_block);
1169 dev_info(dev, "single: 0x%x\n", mode->single);
1170 dev_info(dev, "------------------------------------------------\n");
1174 * set mode is the function which controls the DSP.
1175 * the restart parameter in struct s2255_mode should be set whenever
1176 * the image size could change via color format, video system or image
1178 * When the restart parameter is set, we sleep for ONE frame to allow the
1179 * DSP time to get the new frame
1181 static int s2255_set_mode(struct s2255_dev *dev, unsigned long chn,
1182 struct s2255_mode *mode)
1186 unsigned long chn_rev;
1188 chn_rev = G_chnmap[chn];
1189 dprintk(3, "mode scale [%ld] %p %d\n", chn, mode, mode->scale);
1190 dprintk(3, "mode scale [%ld] %p %d\n", chn, &dev->mode[chn],
1191 dev->mode[chn].scale);
1192 dprintk(2, "mode contrast %x\n", mode->contrast);
1195 dev->mode[chn] = *mode;
1196 dev->req_image_size[chn] = get_transfer_size(mode);
1197 dprintk(1, "transfer size %ld\n", dev->req_image_size[chn]);
1199 buffer = kzalloc(512, GFP_KERNEL);
1200 if (buffer == NULL) {
1201 dev_err(&dev->udev->dev, "out of mem\n");
1206 buffer[0] = IN_DATA_TOKEN;
1207 buffer[1] = (u32) chn_rev;
1208 buffer[2] = CMD_SET_MODE;
1209 memcpy(&buffer[3], &dev->mode[chn], sizeof(struct s2255_mode));
1210 res = s2255_write_config(dev->udev, (unsigned char *)buffer, 512);
1212 dump_verify_mode(dev, mode);
1214 dprintk(1, "set mode done chn %lu, %d\n", chn, res);
1216 /* wait at least 3 frames before continuing */
1220 /* clear the restart flag */
1221 dev->mode[chn].restart = 0;
1226 static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
1229 struct s2255_fh *fh = priv;
1230 struct s2255_dev *dev = fh->dev;
1231 struct s2255_mode *new_mode;
1232 struct s2255_mode *old_mode;
1235 dprintk(4, "%s\n", __func__);
1236 if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) {
1237 dev_err(&dev->udev->dev, "invalid fh type0\n");
1240 if (i != fh->type) {
1241 dev_err(&dev->udev->dev, "invalid fh type1\n");
1245 if (!res_get(dev, fh)) {
1246 dev_err(&dev->udev->dev, "s2255: stream busy\n");
1250 /* send a set mode command everytime with restart.
1251 in case we switch resolutions or other parameters */
1253 new_mode = &fh->mode;
1254 old_mode = &fh->dev->mode[chn];
1256 if (new_mode->color != old_mode->color)
1257 new_mode->restart = 1;
1258 else if (new_mode->scale != old_mode->scale)
1259 new_mode->restart = 1;
1260 else if (new_mode->format != old_mode->format)
1261 new_mode->restart = 1;
1263 s2255_set_mode(dev, chn, new_mode);
1264 new_mode->restart = 0;
1265 *old_mode = *new_mode;
1266 dev->cur_fmt[chn] = fh->fmt;
1267 dprintk(1, "%s[%d]\n", __func__, chn);
1268 dev->last_frame[chn] = -1;
1269 dev->bad_payload[chn] = 0;
1270 dev->cur_frame[chn] = 0;
1271 for (j = 0; j < SYS_FRAMES; j++) {
1272 dev->buffer[chn].frame[j].ulState = 0;
1273 dev->buffer[chn].frame[j].cur_size = 0;
1275 res = videobuf_streamon(&fh->vb_vidq);
1277 s2255_start_acquire(dev, chn);
1278 dev->b_acquire[chn] = 1;
1285 static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i)
1288 struct s2255_fh *fh = priv;
1289 struct s2255_dev *dev = fh->dev;
1291 dprintk(4, "%s\n, channel: %d", __func__, fh->channel);
1292 if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) {
1293 printk(KERN_ERR "invalid fh type0\n");
1296 if (i != fh->type) {
1297 printk(KERN_ERR "invalid type i\n");
1300 s2255_stop_acquire(dev, fh->channel);
1301 res = videobuf_streamoff(&fh->vb_vidq);
1308 static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *i)
1310 struct s2255_fh *fh = priv;
1311 struct s2255_mode *mode;
1312 struct videobuf_queue *q = &fh->vb_vidq;
1315 mutex_lock(&q->vb_lock);
1316 if (videobuf_queue_is_busy(q)) {
1317 dprintk(1, "queue busy\n");
1322 if (res_locked(fh->dev, fh)) {
1323 dprintk(1, "can't change standard after started\n");
1329 if (*i & V4L2_STD_NTSC) {
1330 dprintk(4, "vidioc_s_std NTSC\n");
1331 mode->format = FORMAT_NTSC;
1332 } else if (*i & V4L2_STD_PAL) {
1333 dprintk(4, "vidioc_s_std PAL\n");
1334 mode->format = FORMAT_PAL;
1339 mutex_unlock(&q->vb_lock);
1343 /* Sensoray 2255 is a multiple channel capture device.
1344 It does not have a "crossbar" of inputs.
1345 We use one V4L device per channel. The user must
1346 be aware that certain combinations are not allowed.
1347 For instance, you cannot do full FPS on more than 2 channels(2 videodevs)
1348 at once in color(you can do full fps on 4 channels with greyscale.
1350 static int vidioc_enum_input(struct file *file, void *priv,
1351 struct v4l2_input *inp)
1353 if (inp->index != 0)
1356 inp->type = V4L2_INPUT_TYPE_CAMERA;
1357 inp->std = S2255_NORMS;
1358 strlcpy(inp->name, "Camera", sizeof(inp->name));
1362 static int vidioc_g_input(struct file *file, void *priv, unsigned int *i)
1367 static int vidioc_s_input(struct file *file, void *priv, unsigned int i)
1374 /* --- controls ---------------------------------------------- */
1375 static int vidioc_queryctrl(struct file *file, void *priv,
1376 struct v4l2_queryctrl *qc)
1380 for (i = 0; i < ARRAY_SIZE(s2255_qctrl); i++)
1381 if (qc->id && qc->id == s2255_qctrl[i].id) {
1382 memcpy(qc, &(s2255_qctrl[i]), sizeof(*qc));
1386 dprintk(4, "query_ctrl -EINVAL %d\n", qc->id);
1390 static int vidioc_g_ctrl(struct file *file, void *priv,
1391 struct v4l2_control *ctrl)
1395 for (i = 0; i < ARRAY_SIZE(s2255_qctrl); i++)
1396 if (ctrl->id == s2255_qctrl[i].id) {
1397 ctrl->value = qctl_regs[i];
1400 dprintk(4, "g_ctrl -EINVAL\n");
1405 static int vidioc_s_ctrl(struct file *file, void *priv,
1406 struct v4l2_control *ctrl)
1409 struct s2255_fh *fh = priv;
1410 struct s2255_dev *dev = fh->dev;
1411 struct s2255_mode *mode;
1413 dprintk(4, "vidioc_s_ctrl\n");
1414 for (i = 0; i < ARRAY_SIZE(s2255_qctrl); i++) {
1415 if (ctrl->id == s2255_qctrl[i].id) {
1416 if (ctrl->value < s2255_qctrl[i].minimum ||
1417 ctrl->value > s2255_qctrl[i].maximum)
1420 qctl_regs[i] = ctrl->value;
1421 /* update the mode to the corresponding value */
1423 case V4L2_CID_BRIGHTNESS:
1424 mode->bright = ctrl->value;
1426 case V4L2_CID_CONTRAST:
1427 mode->contrast = ctrl->value;
1430 mode->hue = ctrl->value;
1432 case V4L2_CID_SATURATION:
1433 mode->saturation = ctrl->value;
1437 /* set mode here. Note: stream does not need restarted.
1438 some V4L programs restart stream unnecessarily
1441 s2255_set_mode(dev, fh->channel, mode);
1448 static int s2255_open(struct inode *inode, struct file *file)
1450 int minor = iminor(inode);
1451 struct s2255_dev *h, *dev = NULL;
1452 struct s2255_fh *fh;
1453 struct list_head *list;
1454 enum v4l2_buf_type type = 0;
1456 int cur_channel = -1;
1457 dprintk(1, "s2255: open called (minor=%d)\n", minor);
1459 list_for_each(list, &s2255_devlist) {
1460 h = list_entry(list, struct s2255_dev, s2255_devlist);
1461 for (i = 0; i < MAX_CHANNELS; i++) {
1462 if (h->vdev[i]->minor == minor) {
1465 type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
1470 if ((NULL == dev) || (cur_channel == -1)) {
1471 dprintk(1, "s2255: openv4l no dev\n");
1475 mutex_lock(&dev->open_lock);
1477 dev->users[cur_channel]++;
1478 dprintk(4, "s2255: open_handles %d\n", dev->users[cur_channel]);
1480 if (atomic_read(&dev->fw_data->fw_state) == S2255_FW_FAILED) {
1481 err("2255 firmware load failed. retrying.\n");
1482 s2255_fwload_start(dev);
1483 wait_event_timeout(dev->fw_data->wait_fw,
1484 (atomic_read(&dev->fw_data->fw_state)
1485 != S2255_FW_NOTLOADED),
1486 msecs_to_jiffies(S2255_LOAD_TIMEOUT));
1487 if (atomic_read(&dev->fw_data->fw_state)
1488 != S2255_FW_SUCCESS) {
1489 printk(KERN_INFO "2255 FW load failed.\n");
1490 dev->users[cur_channel]--;
1491 mutex_unlock(&dev->open_lock);
1494 } else if (atomic_read(&dev->fw_data->fw_state) == S2255_FW_NOTLOADED) {
1495 /* give S2255_LOAD_TIMEOUT time for firmware to load in case
1496 driver loaded and then device immediately opened */
1497 printk(KERN_INFO "%s waiting for firmware load\n", __func__);
1498 wait_event_timeout(dev->fw_data->wait_fw,
1499 (atomic_read(&dev->fw_data->fw_state)
1500 != S2255_FW_NOTLOADED),
1501 msecs_to_jiffies(S2255_LOAD_TIMEOUT));
1502 if (atomic_read(&dev->fw_data->fw_state)
1503 != S2255_FW_SUCCESS) {
1504 printk(KERN_INFO "2255 firmware not loaded"
1506 dev->users[cur_channel]--;
1507 mutex_unlock(&dev->open_lock);
1512 /* allocate + initialize per filehandle data */
1513 fh = kzalloc(sizeof(*fh), GFP_KERNEL);
1515 dev->users[cur_channel]--;
1516 mutex_unlock(&dev->open_lock);
1520 file->private_data = fh;
1522 fh->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
1523 fh->mode = dev->mode[cur_channel];
1524 fh->fmt = dev->cur_fmt[cur_channel];
1525 /* default 4CIF NTSC */
1526 fh->width = LINE_SZ_4CIFS_NTSC;
1527 fh->height = NUM_LINES_4CIFS_NTSC * 2;
1528 fh->channel = cur_channel;
1530 /* Put all controls at a sane state */
1531 for (i = 0; i < ARRAY_SIZE(s2255_qctrl); i++)
1532 qctl_regs[i] = s2255_qctrl[i].default_value;
1534 dprintk(1, "s2255drv: open minor=%d type=%s users=%d\n",
1535 minor, v4l2_type_names[type], dev->users[cur_channel]);
1536 dprintk(2, "s2255drv: open: fh=0x%08lx, dev=0x%08lx, vidq=0x%08lx\n",
1537 (unsigned long)fh, (unsigned long)dev,
1538 (unsigned long)&dev->vidq[cur_channel]);
1539 dprintk(4, "s2255drv: open: list_empty active=%d\n",
1540 list_empty(&dev->vidq[cur_channel].active));
1542 videobuf_queue_vmalloc_init(&fh->vb_vidq, &s2255_video_qops,
1545 V4L2_FIELD_INTERLACED,
1546 sizeof(struct s2255_buffer), fh);
1548 kref_get(&dev->kref);
1549 mutex_unlock(&dev->open_lock);
1554 static unsigned int s2255_poll(struct file *file,
1555 struct poll_table_struct *wait)
1557 struct s2255_fh *fh = file->private_data;
1559 dprintk(100, "%s\n", __func__);
1561 if (V4L2_BUF_TYPE_VIDEO_CAPTURE != fh->type)
1564 rc = videobuf_poll_stream(file, &fh->vb_vidq, wait);
1568 static void s2255_destroy(struct kref *kref)
1570 struct s2255_dev *dev = to_s2255_dev(kref);
1572 printk(KERN_ERR "s2255drv: kref problem\n");
1577 * Wake up any firmware load waiting (only done in .open,
1578 * which holds the open_lock mutex)
1580 atomic_set(&dev->fw_data->fw_state, S2255_FW_DISCONNECTING);
1581 wake_up(&dev->fw_data->wait_fw);
1583 /* prevent s2255_disconnect from racing s2255_open */
1584 mutex_lock(&dev->open_lock);
1585 s2255_exit_v4l(dev);
1587 * device unregistered so no longer possible to open. open_mutex
1588 * can be unlocked and timers deleted afterwards.
1590 mutex_unlock(&dev->open_lock);
1592 /* board shutdown stops the read pipe if it is running */
1593 s2255_board_shutdown(dev);
1595 /* make sure firmware still not trying to load */
1596 del_timer(&dev->timer); /* only started in .probe and .open */
1598 if (dev->fw_data->fw_urb) {
1599 dprintk(2, "kill fw_urb\n");
1600 usb_kill_urb(dev->fw_data->fw_urb);
1601 usb_free_urb(dev->fw_data->fw_urb);
1602 dev->fw_data->fw_urb = NULL;
1606 * delete the dsp_wait timer, which sets the firmware
1607 * state on completion. This is done before fw_data
1611 del_timer(&dev->fw_data->dsp_wait); /* only started in .open */
1613 if (dev->fw_data->fw)
1614 release_firmware(dev->fw_data->fw);
1615 kfree(dev->fw_data->pfw_data);
1616 kfree(dev->fw_data);
1618 usb_put_dev(dev->udev);
1619 dprintk(1, "%s", __func__);
1623 static int s2255_close(struct inode *inode, struct file *file)
1625 struct s2255_fh *fh = file->private_data;
1626 struct s2255_dev *dev = fh->dev;
1627 int minor = iminor(inode);
1631 mutex_lock(&dev->open_lock);
1633 /* turn off stream */
1634 if (res_check(fh)) {
1635 if (dev->b_acquire[fh->channel])
1636 s2255_stop_acquire(dev, fh->channel);
1637 videobuf_streamoff(&fh->vb_vidq);
1641 videobuf_mmap_free(&fh->vb_vidq);
1642 dev->users[fh->channel]--;
1644 mutex_unlock(&dev->open_lock);
1646 kref_put(&dev->kref, s2255_destroy);
1647 dprintk(1, "s2255: close called (minor=%d, users=%d)\n",
1648 minor, dev->users[fh->channel]);
1653 static int s2255_mmap_v4l(struct file *file, struct vm_area_struct *vma)
1655 struct s2255_fh *fh = file->private_data;
1660 dprintk(4, "mmap called, vma=0x%08lx\n", (unsigned long)vma);
1662 ret = videobuf_mmap_mapper(&fh->vb_vidq, vma);
1664 dprintk(4, "vma start=0x%08lx, size=%ld, ret=%d\n",
1665 (unsigned long)vma->vm_start,
1666 (unsigned long)vma->vm_end - (unsigned long)vma->vm_start, ret);
1671 static const struct file_operations s2255_fops_v4l = {
1672 .owner = THIS_MODULE,
1674 .release = s2255_close,
1676 .ioctl = video_ioctl2, /* V4L2 ioctl handler */
1677 .compat_ioctl = v4l_compat_ioctl32,
1678 .mmap = s2255_mmap_v4l,
1679 .llseek = no_llseek,
1682 static const struct v4l2_ioctl_ops s2255_ioctl_ops = {
1683 .vidioc_querycap = vidioc_querycap,
1684 .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap,
1685 .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap,
1686 .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap,
1687 .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap,
1688 .vidioc_reqbufs = vidioc_reqbufs,
1689 .vidioc_querybuf = vidioc_querybuf,
1690 .vidioc_qbuf = vidioc_qbuf,
1691 .vidioc_dqbuf = vidioc_dqbuf,
1692 .vidioc_s_std = vidioc_s_std,
1693 .vidioc_enum_input = vidioc_enum_input,
1694 .vidioc_g_input = vidioc_g_input,
1695 .vidioc_s_input = vidioc_s_input,
1696 .vidioc_queryctrl = vidioc_queryctrl,
1697 .vidioc_g_ctrl = vidioc_g_ctrl,
1698 .vidioc_s_ctrl = vidioc_s_ctrl,
1699 .vidioc_streamon = vidioc_streamon,
1700 .vidioc_streamoff = vidioc_streamoff,
1701 #ifdef CONFIG_VIDEO_V4L1_COMPAT
1702 .vidiocgmbuf = vidioc_cgmbuf,
1706 static struct video_device template = {
1708 .fops = &s2255_fops_v4l,
1709 .ioctl_ops = &s2255_ioctl_ops,
1711 .release = video_device_release,
1712 .tvnorms = S2255_NORMS,
1713 .current_norm = V4L2_STD_NTSC_M,
1716 static int s2255_probe_v4l(struct s2255_dev *dev)
1720 int cur_nr = video_nr;
1722 /* initialize all video 4 linux */
1723 list_add_tail(&dev->s2255_devlist, &s2255_devlist);
1724 /* register 4 video devices */
1725 for (i = 0; i < MAX_CHANNELS; i++) {
1726 INIT_LIST_HEAD(&dev->vidq[i].active);
1727 dev->vidq[i].dev = dev;
1728 dev->vidq[i].channel = i;
1729 dev->vidq[i].kthread = NULL;
1730 /* register 4 video devices */
1731 dev->vdev[i] = video_device_alloc();
1732 memcpy(dev->vdev[i], &template, sizeof(struct video_device));
1733 dev->vdev[i]->parent = &dev->interface->dev;
1735 ret = video_register_device(dev->vdev[i],
1739 ret = video_register_device(dev->vdev[i],
1742 dev->vdev[i]->priv = dev;
1745 dev_err(&dev->udev->dev,
1746 "failed to register video device!\n");
1750 printk(KERN_INFO "Sensoray 2255 V4L driver\n");
1754 static void s2255_exit_v4l(struct s2255_dev *dev)
1756 struct list_head *list;
1758 /* unregister the video devices */
1759 while (!list_empty(&s2255_devlist)) {
1760 list = s2255_devlist.next;
1763 for (i = 0; i < MAX_CHANNELS; i++) {
1764 if (-1 != dev->vdev[i]->minor)
1765 video_unregister_device(dev->vdev[i]);
1767 video_device_release(dev->vdev[i]);
1771 /* this function moves the usb stream read pipe data
1772 * into the system buffers.
1773 * returns 0 on success, EAGAIN if more data to process( call this
1776 * Received frame structure:
1777 * bytes 0-3: marker : 0x2255DA4AL (FRAME_MARKER)
1778 * bytes 4-7: channel: 0-3
1779 * bytes 8-11: payload size: size of the frame
1780 * bytes 12-payloadsize+12: frame data
1782 static int save_frame(struct s2255_dev *dev, struct s2255_pipeinfo *pipe_info)
1784 static int dbgsync; /* = 0; */
1790 unsigned long copy_size;
1793 struct s2255_framei *frm;
1794 unsigned char *pdata;
1795 unsigned long cur_size;
1797 struct s2255_bufferi *buf;
1798 dprintk(100, "buffer to user\n");
1800 idx = dev->cur_frame[dev->cc];
1801 buf = &dev->buffer[dev->cc];
1802 frm = &buf->frame[idx];
1804 if (frm->ulState == 0) {
1808 } else if (frm->ulState == 2) {
1809 /* system frame was not freed */
1810 dprintk(2, "sys frame not free. overrun ringbuf\n");
1817 if (*(s32 *) pipe_info->transfer_buffer != FRAME_MARKER) {
1820 dprintk(3, "not synched, discarding all packets"
1825 pdata = (unsigned char *)pipe_info->transfer_buffer;
1826 for (jj = 0; jj < (pipe_info->cur_transfer_size - 12);
1828 if (*(s32 *) pdata == FRAME_MARKER) {
1831 "found frame marker at offset:"
1832 " %d [%x %x]\n", jj, pdata[0],
1836 cc = *(u32 *) (pdata + sizeof(u32));
1837 if (cc >= MAX_CHANNELS) {
1843 dev->cc = G_chnmap[cc];
1856 pword = (u32 *) pipe_info->transfer_buffer;
1859 if (cc >= MAX_CHANNELS) {
1860 printk("invalid channel found. "
1861 "throwing out data!\n");
1864 dev->cc = G_chnmap[cc];
1866 if (payload != dev->req_image_size[dev->cc]) {
1867 dprintk(1, "[%d][%d]unexpected payload: %d"
1868 "required: %lu \n", cc, dev->cc,
1869 payload, dev->req_image_size[dev->cc]);
1870 dev->bad_payload[dev->cc]++;
1871 /* discard the bad frame */
1877 /* search done. now find out if should be acquiring
1879 if (!dev->b_acquire[dev->cc]) {
1884 idx = dev->cur_frame[dev->cc];
1885 frm = &dev->buffer[dev->cc].frame[idx];
1887 if (frm->ulState == 0) {
1890 } else if (frm->ulState == 2) {
1891 /* system frame ring buffer overrun */
1892 dprintk(2, "sys frame overrun. overwriting frame %d %d\n",
1899 /* skip the marker 512 bytes (and offset if out of sync) */
1900 psrc = (u8 *)pipe_info->transfer_buffer + offset + PREFIX_SIZE;
1902 psrc = (u8 *)pipe_info->transfer_buffer;
1905 if (frm->lpvbits == NULL) {
1906 dprintk(1, "s2255 frame buffer == NULL.%p %p %d %d",
1907 frm, dev, dev->cc, idx);
1911 pdest = frm->lpvbits + frm->cur_size;
1915 (pipe_info->cur_transfer_size - offset) - PREFIX_SIZE;
1916 if (copy_size > pipe_info->cur_transfer_size) {
1917 printk("invalid copy size, overflow!\n");
1921 copy_size = pipe_info->cur_transfer_size;
1924 cur_size = frm->cur_size;
1925 size = dev->req_image_size[dev->cc];
1927 if ((copy_size + cur_size) > size) {
1928 copy_size = size - cur_size;
1932 memcpy(pdest, psrc, copy_size);
1933 cur_size += copy_size;
1934 frm->cur_size += copy_size;
1935 dprintk(50, "cur_size size %lu size %lu \n", cur_size, size);
1937 if (cur_size >= (size - PREFIX_SIZE)) {
1940 dprintk(2, "****************[%d]Buffer[%d]full*************\n",
1942 dev->last_frame[cc] = dev->cur_frame[cc];
1943 dev->cur_frame[cc]++;
1944 /* end of system frame ring buffer, start at zero */
1945 if ((dev->cur_frame[cc] == SYS_FRAMES) ||
1946 (dev->cur_frame[cc] == dev->buffer[cc].dwFrames))
1947 dev->cur_frame[cc] = 0;
1949 /* signal the semaphore for this channel */
1950 if (dev->b_acquire[cc])
1951 s2255_got_frame(dev, cc);
1952 dev->frame_count[cc]++;
1954 /* frame was truncated */
1956 /* return more data to process */
1959 /* done successfully */
1963 static void s2255_read_video_callback(struct s2255_dev *dev,
1964 struct s2255_pipeinfo *pipe_info)
1967 dprintk(50, "callback read video \n");
1969 if (dev->cc >= MAX_CHANNELS) {
1971 dev_err(&dev->udev->dev, "invalid channel\n");
1974 /* otherwise copy to the system buffers */
1975 res = save_frame(dev, pipe_info);
1977 save_frame(dev, pipe_info);
1979 dprintk(50, "callback read video done\n");
1983 static long s2255_vendor_req(struct s2255_dev *dev, unsigned char Request,
1984 u16 Index, u16 Value, void *TransferBuffer,
1985 s32 TransferBufferLength, int bOut)
1989 r = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
1991 USB_TYPE_VENDOR | USB_RECIP_DEVICE |
1993 Value, Index, TransferBuffer,
1994 TransferBufferLength, HZ * 5);
1996 r = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
1997 Request, USB_TYPE_VENDOR | USB_RECIP_DEVICE,
1998 Value, Index, TransferBuffer,
1999 TransferBufferLength, HZ * 5);
2005 * retrieve FX2 firmware version. future use.
2006 * @param dev pointer to device extension
2007 * @return -1 for fail, else returns firmware version as an int(16 bits)
2009 static int s2255_get_fx2fw(struct s2255_dev *dev)
2013 unsigned char transBuffer[64];
2014 ret = s2255_vendor_req(dev, S2255_VR_FW, 0, 0, transBuffer, 2,
2017 dprintk(2, "get fw error: %x\n", ret);
2018 fw = transBuffer[0] + (transBuffer[1] << 8);
2019 dprintk(2, "Get FW %x %x\n", transBuffer[0], transBuffer[1]);
2024 * Create the system ring buffer to copy frames into from the
2027 static int s2255_create_sys_buffers(struct s2255_dev *dev, unsigned long chn)
2030 unsigned long reqsize;
2031 dprintk(1, "create sys buffers\n");
2032 if (chn >= MAX_CHANNELS)
2035 dev->buffer[chn].dwFrames = SYS_FRAMES;
2037 /* always allocate maximum size(PAL) for system buffers */
2038 reqsize = SYS_FRAMES_MAXSIZE;
2040 if (reqsize > SYS_FRAMES_MAXSIZE)
2041 reqsize = SYS_FRAMES_MAXSIZE;
2043 for (i = 0; i < SYS_FRAMES; i++) {
2044 /* allocate the frames */
2045 dev->buffer[chn].frame[i].lpvbits = vmalloc(reqsize);
2047 dprintk(1, "valloc %p chan %lu, idx %lu, pdata %p\n",
2048 &dev->buffer[chn].frame[i], chn, i,
2049 dev->buffer[chn].frame[i].lpvbits);
2050 dev->buffer[chn].frame[i].size = reqsize;
2051 if (dev->buffer[chn].frame[i].lpvbits == NULL) {
2052 printk(KERN_INFO "out of memory. using less frames\n");
2053 dev->buffer[chn].dwFrames = i;
2058 /* make sure internal states are set */
2059 for (i = 0; i < SYS_FRAMES; i++) {
2060 dev->buffer[chn].frame[i].ulState = 0;
2061 dev->buffer[chn].frame[i].cur_size = 0;
2064 dev->cur_frame[chn] = 0;
2065 dev->last_frame[chn] = -1;
2069 static int s2255_release_sys_buffers(struct s2255_dev *dev,
2070 unsigned long channel)
2073 dprintk(1, "release sys buffers\n");
2074 for (i = 0; i < SYS_FRAMES; i++) {
2075 if (dev->buffer[channel].frame[i].lpvbits) {
2076 dprintk(1, "vfree %p\n",
2077 dev->buffer[channel].frame[i].lpvbits);
2078 vfree(dev->buffer[channel].frame[i].lpvbits);
2080 dev->buffer[channel].frame[i].lpvbits = NULL;
2085 static int s2255_board_init(struct s2255_dev *dev)
2088 struct s2255_mode mode_def = DEF_MODEI_NTSC_CONT;
2090 dprintk(4, "board init: %p", dev);
2092 for (j = 0; j < MAX_PIPE_BUFFERS; j++) {
2093 struct s2255_pipeinfo *pipe = &dev->pipes[j];
2095 memset(pipe, 0, sizeof(*pipe));
2097 pipe->cur_transfer_size = DEFAULT_PIPE_USBBLOCK;
2098 pipe->max_transfer_size = MAX_PIPE_USBBLOCK;
2100 if (pipe->cur_transfer_size > pipe->max_transfer_size)
2101 pipe->cur_transfer_size = pipe->max_transfer_size;
2102 pipe->transfer_buffer = kzalloc(pipe->max_transfer_size,
2104 if (pipe->transfer_buffer == NULL) {
2105 dprintk(1, "out of memory!\n");
2111 /* query the firmware */
2112 fw_ver = s2255_get_fx2fw(dev);
2114 printk(KERN_INFO "2255 usb firmware version %d \n", fw_ver);
2115 if (fw_ver < CUR_USB_FWVER)
2116 err("usb firmware not up to date %d\n", fw_ver);
2118 for (j = 0; j < MAX_CHANNELS; j++) {
2119 dev->b_acquire[j] = 0;
2120 dev->mode[j] = mode_def;
2121 dev->cur_fmt[j] = &formats[0];
2122 dev->mode[j].restart = 1;
2123 dev->req_image_size[j] = get_transfer_size(&mode_def);
2124 dev->frame_count[j] = 0;
2125 /* create the system buffers */
2126 s2255_create_sys_buffers(dev, j);
2128 /* start read pipe */
2129 s2255_start_readpipe(dev);
2131 dprintk(1, "S2255: board initialized\n");
2135 static int s2255_board_shutdown(struct s2255_dev *dev)
2139 dprintk(1, "S2255: board shutdown: %p", dev);
2141 for (i = 0; i < MAX_CHANNELS; i++) {
2142 if (dev->b_acquire[i])
2143 s2255_stop_acquire(dev, i);
2146 s2255_stop_readpipe(dev);
2148 for (i = 0; i < MAX_CHANNELS; i++)
2149 s2255_release_sys_buffers(dev, i);
2151 /* release transfer buffers */
2152 for (i = 0; i < MAX_PIPE_BUFFERS; i++) {
2153 struct s2255_pipeinfo *pipe = &dev->pipes[i];
2154 kfree(pipe->transfer_buffer);
2159 static void read_pipe_completion(struct urb *purb)
2161 struct s2255_pipeinfo *pipe_info;
2162 struct s2255_dev *dev;
2166 pipe_info = purb->context;
2167 dprintk(100, "read pipe completion %p, status %d\n", purb,
2169 if (pipe_info == NULL) {
2170 err("no context !");
2174 dev = pipe_info->dev;
2176 err("no context !");
2179 status = purb->status;
2181 dprintk(2, "read_pipe_completion: err\n");
2185 if (pipe_info->state == 0) {
2186 dprintk(2, "exiting USB pipe");
2190 s2255_read_video_callback(dev, pipe_info);
2192 pipe_info->err_count = 0;
2193 pipe = usb_rcvbulkpipe(dev->udev, dev->read_endpoint);
2195 usb_fill_bulk_urb(pipe_info->stream_urb, dev->udev,
2197 pipe_info->transfer_buffer,
2198 pipe_info->cur_transfer_size,
2199 read_pipe_completion, pipe_info);
2201 if (pipe_info->state != 0) {
2202 if (usb_submit_urb(pipe_info->stream_urb, GFP_KERNEL)) {
2203 dev_err(&dev->udev->dev, "error submitting urb\n");
2204 usb_free_urb(pipe_info->stream_urb);
2207 dprintk(2, "read pipe complete state 0\n");
2212 static int s2255_start_readpipe(struct s2255_dev *dev)
2217 struct s2255_pipeinfo *pipe_info = dev->pipes;
2218 pipe = usb_rcvbulkpipe(dev->udev, dev->read_endpoint);
2219 dprintk(2, "start pipe IN %d\n", dev->read_endpoint);
2221 for (i = 0; i < MAX_PIPE_BUFFERS; i++) {
2222 pipe_info->state = 1;
2223 pipe_info->buf_index = (u32) i;
2224 pipe_info->priority_set = 0;
2225 pipe_info->stream_urb = usb_alloc_urb(0, GFP_KERNEL);
2226 if (!pipe_info->stream_urb) {
2227 dev_err(&dev->udev->dev,
2228 "ReadStream: Unable to alloc URB");
2231 /* transfer buffer allocated in board_init */
2232 usb_fill_bulk_urb(pipe_info->stream_urb, dev->udev,
2234 pipe_info->transfer_buffer,
2235 pipe_info->cur_transfer_size,
2236 read_pipe_completion, pipe_info);
2238 pipe_info->urb_size = sizeof(pipe_info->stream_urb);
2239 dprintk(4, "submitting URB %p\n", pipe_info->stream_urb);
2240 retval = usb_submit_urb(pipe_info->stream_urb, GFP_KERNEL);
2242 printk(KERN_ERR "s2255: start read pipe failed\n");
2250 /* starts acquisition process */
2251 static int s2255_start_acquire(struct s2255_dev *dev, unsigned long chn)
2253 unsigned char *buffer;
2255 unsigned long chn_rev;
2257 if (chn >= MAX_CHANNELS) {
2258 dprintk(2, "start acquire failed, bad channel %lu\n", chn);
2262 chn_rev = G_chnmap[chn];
2263 dprintk(1, "S2255: start acquire %lu \n", chn);
2265 buffer = kzalloc(512, GFP_KERNEL);
2266 if (buffer == NULL) {
2267 dev_err(&dev->udev->dev, "out of mem\n");
2271 dev->last_frame[chn] = -1;
2272 dev->bad_payload[chn] = 0;
2273 dev->cur_frame[chn] = 0;
2274 for (j = 0; j < SYS_FRAMES; j++) {
2275 dev->buffer[chn].frame[j].ulState = 0;
2276 dev->buffer[chn].frame[j].cur_size = 0;
2279 /* send the start command */
2280 *(u32 *) buffer = IN_DATA_TOKEN;
2281 *((u32 *) buffer + 1) = (u32) chn_rev;
2282 *((u32 *) buffer + 2) = (u32) CMD_START;
2283 res = s2255_write_config(dev->udev, (unsigned char *)buffer, 512);
2285 dev_err(&dev->udev->dev, "CMD_START error\n");
2287 dprintk(2, "start acquire exit[%lu] %d \n", chn, res);
2292 static int s2255_stop_acquire(struct s2255_dev *dev, unsigned long chn)
2294 unsigned char *buffer;
2296 unsigned long chn_rev;
2298 if (chn >= MAX_CHANNELS) {
2299 dprintk(2, "stop acquire failed, bad channel %lu\n", chn);
2302 chn_rev = G_chnmap[chn];
2304 buffer = kzalloc(512, GFP_KERNEL);
2305 if (buffer == NULL) {
2306 dev_err(&dev->udev->dev, "out of mem\n");
2310 /* send the stop command */
2311 dprintk(4, "stop acquire %lu\n", chn);
2312 *(u32 *) buffer = IN_DATA_TOKEN;
2313 *((u32 *) buffer + 1) = (u32) chn_rev;
2314 *((u32 *) buffer + 2) = CMD_STOP;
2315 res = s2255_write_config(dev->udev, (unsigned char *)buffer, 512);
2318 dev_err(&dev->udev->dev, "CMD_STOP error\n");
2320 dprintk(4, "stop acquire: releasing states \n");
2323 dev->b_acquire[chn] = 0;
2328 static void s2255_stop_readpipe(struct s2255_dev *dev)
2333 err("s2255: invalid device");
2336 dprintk(4, "stop read pipe\n");
2337 for (j = 0; j < MAX_PIPE_BUFFERS; j++) {
2338 struct s2255_pipeinfo *pipe_info = &dev->pipes[j];
2340 if (pipe_info->state == 0)
2342 pipe_info->state = 0;
2343 pipe_info->prev_state = 1;
2348 for (j = 0; j < MAX_PIPE_BUFFERS; j++) {
2349 struct s2255_pipeinfo *pipe_info = &dev->pipes[j];
2350 if (pipe_info->stream_urb) {
2352 usb_kill_urb(pipe_info->stream_urb);
2353 usb_free_urb(pipe_info->stream_urb);
2354 pipe_info->stream_urb = NULL;
2357 dprintk(2, "s2255 stop read pipe: %d\n", j);
2361 static void s2255_fwload_start(struct s2255_dev *dev)
2363 dev->fw_data->fw_size = dev->fw_data->fw->size;
2364 atomic_set(&dev->fw_data->fw_state, S2255_FW_NOTLOADED);
2365 memcpy(dev->fw_data->pfw_data,
2366 dev->fw_data->fw->data, CHUNK_SIZE);
2367 dev->fw_data->fw_loaded = CHUNK_SIZE;
2368 usb_fill_bulk_urb(dev->fw_data->fw_urb, dev->udev,
2369 usb_sndbulkpipe(dev->udev, 2),
2370 dev->fw_data->pfw_data,
2371 CHUNK_SIZE, s2255_fwchunk_complete,
2373 mod_timer(&dev->timer, jiffies + HZ);
2376 /* standard usb probe function */
2377 static int s2255_probe(struct usb_interface *interface,
2378 const struct usb_device_id *id)
2380 struct s2255_dev *dev = NULL;
2381 struct usb_host_interface *iface_desc;
2382 struct usb_endpoint_descriptor *endpoint;
2384 int retval = -ENOMEM;
2386 dprintk(2, "s2255: probe\n");
2388 /* allocate memory for our device state and initialize it to zero */
2389 dev = kzalloc(sizeof(struct s2255_dev), GFP_KERNEL);
2391 err("s2255: out of memory");
2395 dev->fw_data = kzalloc(sizeof(struct s2255_fw), GFP_KERNEL);
2399 mutex_init(&dev->lock);
2400 mutex_init(&dev->open_lock);
2402 /* grab usb_device and save it */
2403 dev->udev = usb_get_dev(interface_to_usbdev(interface));
2404 if (dev->udev == NULL) {
2405 dev_err(&interface->dev, "null usb device\n");
2409 kref_init(&dev->kref);
2410 dprintk(1, "dev: %p, kref: %p udev %p interface %p\n", dev, &dev->kref,
2411 dev->udev, interface);
2412 dev->interface = interface;
2413 /* set up the endpoint information */
2414 iface_desc = interface->cur_altsetting;
2415 dprintk(1, "num endpoints %d\n", iface_desc->desc.bNumEndpoints);
2416 for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
2417 endpoint = &iface_desc->endpoint[i].desc;
2418 if (!dev->read_endpoint && usb_endpoint_is_bulk_in(endpoint)) {
2419 /* we found the bulk in endpoint */
2420 dev->read_endpoint = endpoint->bEndpointAddress;
2424 if (!dev->read_endpoint) {
2425 dev_err(&interface->dev, "Could not find bulk-in endpoint");
2430 usb_set_intfdata(interface, dev);
2432 dprintk(100, "after intfdata %p\n", dev);
2434 init_timer(&dev->timer);
2435 dev->timer.function = s2255_timer;
2436 dev->timer.data = (unsigned long)dev->fw_data;
2438 init_waitqueue_head(&dev->fw_data->wait_fw);
2441 dev->fw_data->fw_urb = usb_alloc_urb(0, GFP_KERNEL);
2443 if (!dev->fw_data->fw_urb) {
2444 dev_err(&interface->dev, "out of memory!\n");
2447 dev->fw_data->pfw_data = kzalloc(CHUNK_SIZE, GFP_KERNEL);
2448 if (!dev->fw_data->pfw_data) {
2449 dev_err(&interface->dev, "out of memory!\n");
2452 /* load the first chunk */
2453 if (request_firmware(&dev->fw_data->fw,
2454 FIRMWARE_FILE_NAME, &dev->udev->dev)) {
2455 printk(KERN_ERR "sensoray 2255 failed to get firmware\n");
2459 /* loads v4l specific */
2460 s2255_probe_v4l(dev);
2461 /* load 2255 board specific */
2462 s2255_board_init(dev);
2464 dprintk(4, "before probe done %p\n", dev);
2465 spin_lock_init(&dev->slock);
2467 s2255_fwload_start(dev);
2468 dev_info(&interface->dev, "Sensoray 2255 detected\n");
2474 /* disconnect routine. when board is removed physically or with rmmod */
2475 static void s2255_disconnect(struct usb_interface *interface)
2477 struct s2255_dev *dev = NULL;
2478 dprintk(1, "s2255: disconnect interface %p\n", interface);
2479 dev = usb_get_intfdata(interface);
2481 kref_put(&dev->kref, s2255_destroy);
2482 dprintk(1, "s2255drv: disconnect\n");
2483 dev_info(&interface->dev, "s2255usb now disconnected\n");
2485 usb_set_intfdata(interface, NULL);
2488 static struct usb_driver s2255_driver = {
2490 .probe = s2255_probe,
2491 .disconnect = s2255_disconnect,
2492 .id_table = s2255_table,
2495 static int __init usb_s2255_init(void)
2499 /* register this driver with the USB subsystem */
2500 result = usb_register(&s2255_driver);
2503 err("usb_register failed. Error number %d", result);
2505 dprintk(2, "s2255_init: done\n");
2509 static void __exit usb_s2255_exit(void)
2511 usb_deregister(&s2255_driver);
2514 module_init(usb_s2255_init);
2515 module_exit(usb_s2255_exit);
2517 MODULE_DESCRIPTION("Sensoray 2255 Video for Linux driver");
2518 MODULE_AUTHOR("Dean Anderson (Sensoray Company Inc.)");
2519 MODULE_LICENSE("GPL");