Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
[linux-2.6] / drivers / net / eexpress.c
1 /* Intel EtherExpress 16 device driver for Linux
2  *
3  * Written by John Sullivan, 1995
4  *  based on original code by Donald Becker, with changes by
5  *  Alan Cox and Pauline Middelink.
6  *
7  * Support for 8-bit mode by Zoltan Szilagyi <zoltans@cs.arizona.edu>
8  *
9  * Many modifications, and currently maintained, by
10  *  Philip Blundell <philb@gnu.org>
11  * Added the Compaq LTE  Alan Cox <alan@redhat.com>
12  * Added MCA support Adam Fritzler <mid@auk.cx>
13  *
14  * Note - this driver is experimental still - it has problems on faster
15  * machines. Someone needs to sit down and go through it line by line with
16  * a databook...
17  */
18
19 /* The EtherExpress 16 is a fairly simple card, based on a shared-memory
20  * design using the i82586 Ethernet coprocessor.  It bears no relationship,
21  * as far as I know, to the similarly-named "EtherExpress Pro" range.
22  *
23  * Historically, Linux support for these cards has been very bad.  However,
24  * things seem to be getting better slowly.
25  */
26
27 /* If your card is confused about what sort of interface it has (eg it
28  * persistently reports "10baseT" when none is fitted), running 'SOFTSET /BART'
29  * or 'SOFTSET /LISA' from DOS seems to help.
30  */
31
32 /* Here's the scoop on memory mapping.
33  *
34  * There are three ways to access EtherExpress card memory: either using the
35  * shared-memory mapping, or using PIO through the dataport, or using PIO
36  * through the "shadow memory" ports.
37  *
38  * The shadow memory system works by having the card map some of its memory
39  * as follows:
40  *
41  * (the low five bits of the SMPTR are ignored)
42  *
43  *  base+0x4000..400f      memory at SMPTR+0..15
44  *  base+0x8000..800f      memory at SMPTR+16..31
45  *  base+0xc000..c007      dubious stuff (memory at SMPTR+16..23 apparently)
46  *  base+0xc008..c00f      memory at 0x0008..0x000f
47  *
48  * This last set (the one at c008) is particularly handy because the SCB
49  * lives at 0x0008.  So that set of ports gives us easy random access to data
50  * in the SCB without having to mess around setting up pointers and the like.
51  * We always use this method to access the SCB (via the scb_xx() functions).
52  *
53  * Dataport access works by aiming the appropriate (read or write) pointer
54  * at the first address you're interested in, and then reading or writing from
55  * the dataport.  The pointers auto-increment after each transfer.  We use
56  * this for data transfer.
57  *
58  * We don't use the shared-memory system because it allegedly doesn't work on
59  * all cards, and because it's a bit more prone to go wrong (it's one more
60  * thing to configure...).
61  */
62
63 /* Known bugs:
64  *
65  * - The card seems to want to give us two interrupts every time something
66  *   happens, where just one would be better.
67  */
68
69 /*
70  *
71  * Note by Zoltan Szilagyi 10-12-96:
72  *
73  * I've succeeded in eliminating the "CU wedged" messages, and hence the
74  * lockups, which were only occurring with cards running in 8-bit mode ("force
75  * 8-bit operation" in Intel's SoftSet utility). This version of the driver
76  * sets the 82586 and the ASIC to 8-bit mode at startup; it also stops the
77  * CU before submitting a packet for transmission, and then restarts it as soon
78  * as the process of handing the packet is complete. This is definitely an
79  * unnecessary slowdown if the card is running in 16-bit mode; therefore one
80  * should detect 16-bit vs 8-bit mode from the EEPROM settings and act 
81  * accordingly. In 8-bit mode with this bugfix I'm getting about 150 K/s for
82  * ftp's, which is significantly better than I get in DOS, so the overhead of
83  * stopping and restarting the CU with each transmit is not prohibitive in
84  * practice.
85  *
86  * Update by David Woodhouse 11/5/99:
87  *
88  * I've seen "CU wedged" messages in 16-bit mode, on the Alpha architecture.
89  * I assume that this is because 16-bit accesses are actually handled as two
90  * 8-bit accesses.
91  */
92
93 #ifdef __alpha__
94 #define LOCKUP16 1
95 #endif
96 #ifndef LOCKUP16
97 #define LOCKUP16 0
98 #endif
99   
100 #include <linux/config.h>
101 #include <linux/module.h>
102 #include <linux/kernel.h>
103 #include <linux/types.h>
104 #include <linux/fcntl.h>
105 #include <linux/interrupt.h>
106 #include <linux/ioport.h>
107 #include <linux/string.h>
108 #include <linux/in.h>
109 #include <linux/delay.h>
110 #include <linux/errno.h>
111 #include <linux/init.h>
112 #include <linux/netdevice.h>
113 #include <linux/etherdevice.h>
114 #include <linux/skbuff.h>
115 #include <linux/slab.h>
116 #include <linux/mca-legacy.h>
117 #include <linux/spinlock.h>
118 #include <linux/bitops.h>
119
120 #include <asm/system.h>
121 #include <asm/io.h>
122 #include <asm/irq.h>
123
124 #ifndef NET_DEBUG
125 #define NET_DEBUG 4
126 #endif
127
128 #include "eexpress.h"
129
130 #define EEXP_IO_EXTENT  16
131
132 /*
133  * Private data declarations
134  */
135
136 struct net_local
137 {
138         struct net_device_stats stats;
139         unsigned long last_tx;       /* jiffies when last transmit started */
140         unsigned long init_time;     /* jiffies when eexp_hw_init586 called */
141         unsigned short rx_first;     /* first rx buf, same as RX_BUF_START */
142         unsigned short rx_last;      /* last rx buf */
143         unsigned short rx_ptr;       /* first rx buf to look at */
144         unsigned short tx_head;      /* next free tx buf */
145         unsigned short tx_reap;      /* first in-use tx buf */
146         unsigned short tx_tail;      /* previous tx buf to tx_head */
147         unsigned short tx_link;      /* last known-executing tx buf */
148         unsigned short last_tx_restart;   /* set to tx_link when we
149                                              restart the CU */
150         unsigned char started;
151         unsigned short rx_buf_start;
152         unsigned short rx_buf_end;
153         unsigned short num_tx_bufs;
154         unsigned short num_rx_bufs;
155         unsigned char width;         /* 0 for 16bit, 1 for 8bit */
156         unsigned char was_promisc;
157         unsigned char old_mc_count;
158         spinlock_t lock;
159 };
160
161 /* This is the code and data that is downloaded to the EtherExpress card's
162  * memory at boot time.
163  */
164
165 static unsigned short start_code[] = {
166 /* 0x0000 */
167         0x0001,                 /* ISCP: busy - cleared after reset */
168         0x0008,0x0000,0x0000,   /* offset,address (lo,hi) of SCB */
169
170         0x0000,0x0000,          /* SCB: status, commands */
171         0x0000,0x0000,          /* links to first command block,
172                                    first receive descriptor */
173         0x0000,0x0000,          /* CRC error, alignment error counts */
174         0x0000,0x0000,          /* out of resources, overrun error counts */
175
176         0x0000,0x0000,          /* pad */
177         0x0000,0x0000,
178
179 /* 0x20 -- start of 82586 CU program */
180 #define CONF_LINK 0x20
181         0x0000,Cmd_Config,      
182         0x0032,                 /* link to next command */
183         0x080c,                 /* 12 bytes follow : fifo threshold=8 */
184         0x2e40,                 /* don't rx bad frames
185                                  * SRDY/ARDY => ext. sync. : preamble len=8
186                                  * take addresses from data buffers
187                                  * 6 bytes/address
188                                  */
189         0x6000,                 /* default backoff method & priority
190                                  * interframe spacing = 0x60 */
191         0xf200,                 /* slot time=0x200 
192                                  * max collision retry = 0xf */
193 #define CONF_PROMISC  0x2e
194         0x0000,                 /* no HDLC : normal CRC : enable broadcast 
195                                  * disable promiscuous/multicast modes */
196         0x003c,                 /* minimum frame length = 60 octets) */
197
198         0x0000,Cmd_SetAddr,
199         0x003e,                 /* link to next command */
200 #define CONF_HWADDR  0x38
201         0x0000,0x0000,0x0000,   /* hardware address placed here */
202
203         0x0000,Cmd_MCast,
204         0x0076,                 /* link to next command */
205 #define CONF_NR_MULTICAST 0x44
206         0x0000,                 /* number of multicast addresses */
207 #define CONF_MULTICAST 0x46
208         0x0000, 0x0000, 0x0000, /* some addresses */
209         0x0000, 0x0000, 0x0000,
210         0x0000, 0x0000, 0x0000,
211         0x0000, 0x0000, 0x0000,
212         0x0000, 0x0000, 0x0000,
213         0x0000, 0x0000, 0x0000,
214         0x0000, 0x0000, 0x0000,
215         0x0000, 0x0000, 0x0000,
216
217 #define CONF_DIAG_RESULT  0x76
218         0x0000, Cmd_Diag,
219         0x007c,                 /* link to next command */
220
221         0x0000,Cmd_TDR|Cmd_INT,
222         0x0084,
223 #define CONF_TDR_RESULT  0x82
224         0x0000,
225
226         0x0000,Cmd_END|Cmd_Nop, /* end of configure sequence */
227         0x0084                  /* dummy link */
228 };
229
230 /* maps irq number to EtherExpress magic value */
231 static char irqrmap[] = { 0,0,1,2,3,4,0,0,0,1,5,6,0,0,0,0 };
232
233 #ifdef CONFIG_MCA_LEGACY
234 /* mapping of the first four bits of the second POS register */
235 static unsigned short mca_iomap[] = {
236         0x270, 0x260, 0x250, 0x240, 0x230, 0x220, 0x210, 0x200,
237         0x370, 0x360, 0x350, 0x340, 0x330, 0x320, 0x310, 0x300
238 };
239 /* bits 5-7 of the second POS register */
240 static char mca_irqmap[] = { 12, 9, 3, 4, 5, 10, 11, 15 };
241 #endif 
242
243 /*
244  * Prototypes for Linux interface
245  */
246
247 static int eexp_open(struct net_device *dev);
248 static int eexp_close(struct net_device *dev);
249 static void eexp_timeout(struct net_device *dev);
250 static struct net_device_stats *eexp_stats(struct net_device *dev);
251 static int eexp_xmit(struct sk_buff *buf, struct net_device *dev);
252
253 static irqreturn_t eexp_irq(int irq, void *dev_addr, struct pt_regs *regs);
254 static void eexp_set_multicast(struct net_device *dev);
255
256 /*
257  * Prototypes for hardware access functions
258  */
259
260 static void eexp_hw_rx_pio(struct net_device *dev);
261 static void eexp_hw_tx_pio(struct net_device *dev, unsigned short *buf,
262                        unsigned short len);
263 static int eexp_hw_probe(struct net_device *dev,unsigned short ioaddr);
264 static unsigned short eexp_hw_readeeprom(unsigned short ioaddr,
265                                          unsigned char location);
266
267 static unsigned short eexp_hw_lasttxstat(struct net_device *dev);
268 static void eexp_hw_txrestart(struct net_device *dev);
269
270 static void eexp_hw_txinit    (struct net_device *dev);
271 static void eexp_hw_rxinit    (struct net_device *dev);
272
273 static void eexp_hw_init586   (struct net_device *dev);
274 static void eexp_setup_filter (struct net_device *dev);
275
276 static char *eexp_ifmap[]={"AUI", "BNC", "RJ45"};
277 enum eexp_iftype {AUI=0, BNC=1, TPE=2};
278
279 #define STARTED_RU      2
280 #define STARTED_CU      1
281
282 /*
283  * Primitive hardware access functions.
284  */
285
286 static inline unsigned short scb_status(struct net_device *dev)
287 {
288         return inw(dev->base_addr + 0xc008);
289 }
290
291 static inline unsigned short scb_rdcmd(struct net_device *dev)
292 {
293         return inw(dev->base_addr + 0xc00a);
294 }
295
296 static inline void scb_command(struct net_device *dev, unsigned short cmd)
297 {
298         outw(cmd, dev->base_addr + 0xc00a);
299 }
300
301 static inline void scb_wrcbl(struct net_device *dev, unsigned short val)
302 {
303         outw(val, dev->base_addr + 0xc00c);
304 }
305
306 static inline void scb_wrrfa(struct net_device *dev, unsigned short val)
307 {
308         outw(val, dev->base_addr + 0xc00e);
309 }
310
311 static inline void set_loopback(struct net_device *dev)
312 {
313         outb(inb(dev->base_addr + Config) | 2, dev->base_addr + Config);
314 }
315
316 static inline void clear_loopback(struct net_device *dev)
317 {
318         outb(inb(dev->base_addr + Config) & ~2, dev->base_addr + Config);
319 }
320
321 static inline unsigned short int SHADOW(short int addr)
322 {
323         addr &= 0x1f;
324         if (addr > 0xf) addr += 0x3ff0;
325         return addr + 0x4000;
326 }
327
328 /*
329  * Linux interface
330  */
331
332 /*
333  * checks for presence of EtherExpress card
334  */
335
336 static int __init do_express_probe(struct net_device *dev)
337 {
338         unsigned short *port;
339         static unsigned short ports[] = { 0x240,0x300,0x310,0x270,0x320,0x340,0 };
340         unsigned short ioaddr = dev->base_addr;
341         int dev_irq = dev->irq;
342         int err;
343
344         SET_MODULE_OWNER(dev);
345
346         dev->if_port = 0xff; /* not set */
347
348 #ifdef CONFIG_MCA_LEGACY
349         if (MCA_bus) {
350                 int slot = 0;
351
352                 /*
353                  * Only find one card at a time.  Subsequent calls
354                  * will find others, however, proper multicard MCA
355                  * probing and setup can't be done with the
356                  * old-style Space.c init routines.  -- ASF
357                  */
358                 while (slot != MCA_NOTFOUND) {
359                         int pos0, pos1;
360                         
361                         slot = mca_find_unused_adapter(0x628B, slot);
362                         if (slot == MCA_NOTFOUND)
363                                 break;
364
365                         pos0 = mca_read_stored_pos(slot, 2);
366                         pos1 = mca_read_stored_pos(slot, 3);
367                         ioaddr = mca_iomap[pos1&0xf];
368
369                         dev->irq = mca_irqmap[(pos1>>4)&0x7];
370                         
371                         /*
372                          * XXX: Transciever selection is done
373                          * differently on the MCA version.  
374                          * How to get it to select something
375                          * other than external/AUI is currently
376                          * unknown.  This code is just for looks. -- ASF
377                          */
378                         if ((pos0 & 0x7) == 0x1)
379                                 dev->if_port = AUI;
380                         else if ((pos0 & 0x7) == 0x5) {
381                                 if (pos1 & 0x80)
382                                         dev->if_port = BNC;
383                                 else
384                                         dev->if_port = TPE;
385                         }
386
387                         mca_set_adapter_name(slot, "Intel EtherExpress 16 MCA");
388                         mca_set_adapter_procfn(slot, NULL, dev);
389                         mca_mark_as_used(slot);
390
391                         break;
392                 }
393         }
394 #endif
395         if (ioaddr&0xfe00) {
396                 if (!request_region(ioaddr, EEXP_IO_EXTENT, "EtherExpress"))
397                         return -EBUSY;
398                 err = eexp_hw_probe(dev,ioaddr);
399                 release_region(ioaddr, EEXP_IO_EXTENT);
400                 return err;
401         } else if (ioaddr)
402                 return -ENXIO;
403
404         for (port=&ports[0] ; *port ; port++ )
405         {
406                 unsigned short sum = 0;
407                 int i;
408                 if (!request_region(*port, EEXP_IO_EXTENT, "EtherExpress"))
409                         continue;
410                 for ( i=0 ; i<4 ; i++ )
411                 {
412                         unsigned short t;
413                         t = inb(*port + ID_PORT);
414                         sum |= (t>>4) << ((t & 0x03)<<2);
415                 }
416                 if (sum==0xbaba && !eexp_hw_probe(dev,*port)) {
417                         release_region(*port, EEXP_IO_EXTENT);
418                         return 0;
419                 }
420                 release_region(*port, EEXP_IO_EXTENT);
421                 dev->irq = dev_irq;
422         }
423         return -ENODEV;
424 }
425
426 #ifndef MODULE
427 struct net_device * __init express_probe(int unit)
428 {
429         struct net_device *dev = alloc_etherdev(sizeof(struct net_local));
430         int err;
431
432         if (!dev)
433                 return ERR_PTR(-ENOMEM);
434
435         sprintf(dev->name, "eth%d", unit);
436         netdev_boot_setup_check(dev);
437
438         err = do_express_probe(dev);
439         if (!err)
440                 return dev;
441         free_netdev(dev);
442         return ERR_PTR(err);
443 }
444 #endif
445
446 /*
447  * open and initialize the adapter, ready for use
448  */
449
450 static int eexp_open(struct net_device *dev)
451 {
452         int ret;
453         unsigned short ioaddr = dev->base_addr;
454         struct net_local *lp = netdev_priv(dev);
455
456 #if NET_DEBUG > 6
457         printk(KERN_DEBUG "%s: eexp_open()\n", dev->name);
458 #endif
459
460         if (!dev->irq || !irqrmap[dev->irq])
461                 return -ENXIO;
462
463         ret = request_irq(dev->irq,&eexp_irq,0,dev->name,dev);
464         if (ret) return ret;
465
466         if (!request_region(ioaddr, EEXP_IO_EXTENT, "EtherExpress")) {
467                 printk(KERN_WARNING "EtherExpress io port %x, is busy.\n"
468                         , ioaddr);
469                 goto err_out1;
470         }
471         if (!request_region(ioaddr+0x4000, EEXP_IO_EXTENT, "EtherExpress shadow")) {
472                 printk(KERN_WARNING "EtherExpress io port %x, is busy.\n"
473                         , ioaddr+0x4000);
474                 goto err_out2;
475         }
476         if (!request_region(ioaddr+0x8000, EEXP_IO_EXTENT, "EtherExpress shadow")) {
477                 printk(KERN_WARNING "EtherExpress io port %x, is busy.\n"
478                         , ioaddr+0x8000);
479                 goto err_out3;
480         }
481         if (!request_region(ioaddr+0xc000, EEXP_IO_EXTENT, "EtherExpress shadow")) {
482                 printk(KERN_WARNING "EtherExpress io port %x, is busy.\n"
483                         , ioaddr+0xc000);
484                 goto err_out4;
485         }
486         
487         if (lp->width) {
488                 printk("%s: forcing ASIC to 8-bit mode\n", dev->name);
489                 outb(inb(dev->base_addr+Config)&~4, dev->base_addr+Config);
490         }
491
492         eexp_hw_init586(dev);
493         netif_start_queue(dev);
494 #if NET_DEBUG > 6
495         printk(KERN_DEBUG "%s: leaving eexp_open()\n", dev->name);
496 #endif
497         return 0;
498
499         err_out4:
500                 release_region(ioaddr+0x8000, EEXP_IO_EXTENT);
501         err_out3:
502                 release_region(ioaddr+0x4000, EEXP_IO_EXTENT);
503         err_out2:
504                 release_region(ioaddr, EEXP_IO_EXTENT);
505         err_out1:
506                 free_irq(dev->irq, dev);
507                 return -EBUSY;
508 }
509
510 /*
511  * close and disable the interface, leaving the 586 in reset.
512  */
513
514 static int eexp_close(struct net_device *dev)
515 {
516         unsigned short ioaddr = dev->base_addr;
517         struct net_local *lp = netdev_priv(dev);
518
519         int irq = dev->irq;
520
521         netif_stop_queue(dev);
522         
523         outb(SIRQ_dis|irqrmap[irq],ioaddr+SET_IRQ);
524         lp->started = 0;
525         scb_command(dev, SCB_CUsuspend|SCB_RUsuspend);
526         outb(0,ioaddr+SIGNAL_CA);
527         free_irq(irq,dev);
528         outb(i586_RST,ioaddr+EEPROM_Ctrl);
529         release_region(ioaddr, EEXP_IO_EXTENT);
530         release_region(ioaddr+0x4000, 16);
531         release_region(ioaddr+0x8000, 16);
532         release_region(ioaddr+0xc000, 16);
533
534         return 0;
535 }
536
537 /*
538  * Return interface stats
539  */
540
541 static struct net_device_stats *eexp_stats(struct net_device *dev)
542 {
543         struct net_local *lp = netdev_priv(dev);
544
545         return &lp->stats;
546 }
547
548 /*
549  * This gets called when a higher level thinks we are broken.  Check that
550  * nothing has become jammed in the CU.
551  */
552
553 static void unstick_cu(struct net_device *dev)
554 {
555         struct net_local *lp = netdev_priv(dev);
556         unsigned short ioaddr = dev->base_addr;
557
558         if (lp->started)
559         {
560                 if ((jiffies - dev->trans_start)>50)
561                 {
562                         if (lp->tx_link==lp->last_tx_restart)
563                         {
564                                 unsigned short boguscount=200,rsst;
565                                 printk(KERN_WARNING "%s: Retransmit timed out, status %04x, resetting...\n",
566                                        dev->name, scb_status(dev));
567                                 eexp_hw_txinit(dev);
568                                 lp->last_tx_restart = 0;
569                                 scb_wrcbl(dev, lp->tx_link);
570                                 scb_command(dev, SCB_CUstart);
571                                 outb(0,ioaddr+SIGNAL_CA);
572                                 while (!SCB_complete(rsst=scb_status(dev)))
573                                 {
574                                         if (!--boguscount)
575                                         {
576                                                 boguscount=200;
577                                                 printk(KERN_WARNING "%s: Reset timed out status %04x, retrying...\n",
578                                                        dev->name,rsst);
579                                                 scb_wrcbl(dev, lp->tx_link);
580                                                 scb_command(dev, SCB_CUstart);
581                                                 outb(0,ioaddr+SIGNAL_CA);
582                                         }
583                                 }
584                                 netif_wake_queue(dev);
585                         }
586                         else
587                         {
588                                 unsigned short status = scb_status(dev);
589                                 if (SCB_CUdead(status))
590                                 {
591                                         unsigned short txstatus = eexp_hw_lasttxstat(dev);
592                                         printk(KERN_WARNING "%s: Transmit timed out, CU not active status %04x %04x, restarting...\n",
593                                                dev->name, status, txstatus);
594                                         eexp_hw_txrestart(dev);
595                                 }
596                                 else
597                                 {
598                                         unsigned short txstatus = eexp_hw_lasttxstat(dev);
599                                         if (netif_queue_stopped(dev) && !txstatus)
600                                         {
601                                                 printk(KERN_WARNING "%s: CU wedged, status %04x %04x, resetting...\n",
602                                                        dev->name,status,txstatus);
603                                                 eexp_hw_init586(dev);
604                                                 netif_wake_queue(dev);
605                                         }
606                                         else
607                                         {
608                                                 printk(KERN_WARNING "%s: transmit timed out\n", dev->name);
609                                         }
610                                 }
611                         }
612                 }
613         }
614         else
615         {
616                 if ((jiffies-lp->init_time)>10)
617                 {
618                         unsigned short status = scb_status(dev);
619                         printk(KERN_WARNING "%s: i82586 startup timed out, status %04x, resetting...\n",
620                                dev->name, status);
621                         eexp_hw_init586(dev);
622                         netif_wake_queue(dev);
623                 }
624         }
625 }
626
627 static void eexp_timeout(struct net_device *dev)
628 {
629         struct net_local *lp = netdev_priv(dev);
630 #ifdef CONFIG_SMP
631         unsigned long flags;
632 #endif
633         int status;
634         
635         disable_irq(dev->irq);
636
637         /*
638          *      Best would be to use synchronize_irq(); spin_lock() here
639          *      lets make it work first..
640          */
641          
642 #ifdef CONFIG_SMP
643         spin_lock_irqsave(&lp->lock, flags);
644 #endif
645
646         status = scb_status(dev);
647         unstick_cu(dev);
648         printk(KERN_INFO "%s: transmit timed out, %s?\n", dev->name,
649                (SCB_complete(status)?"lost interrupt":
650                 "board on fire"));
651         lp->stats.tx_errors++;
652         lp->last_tx = jiffies;
653         if (!SCB_complete(status)) {
654                 scb_command(dev, SCB_CUabort);
655                 outb(0,dev->base_addr+SIGNAL_CA);
656         }
657         netif_wake_queue(dev);  
658 #ifdef CONFIG_SMP
659         spin_unlock_irqrestore(&lp->lock, flags);
660 #endif
661 }
662
663 /*
664  * Called to transmit a packet, or to allow us to right ourselves
665  * if the kernel thinks we've died.
666  */
667 static int eexp_xmit(struct sk_buff *buf, struct net_device *dev)
668 {
669         struct net_local *lp = netdev_priv(dev);
670         short length = buf->len;
671 #ifdef CONFIG_SMP
672         unsigned long flags;
673 #endif
674
675 #if NET_DEBUG > 6
676         printk(KERN_DEBUG "%s: eexp_xmit()\n", dev->name);
677 #endif
678
679         if (buf->len < ETH_ZLEN) {
680                 buf = skb_padto(buf, ETH_ZLEN);
681                 if (buf == NULL)
682                         return 0;
683                 length = ETH_ZLEN;
684         }
685
686         disable_irq(dev->irq);
687
688         /*
689          *      Best would be to use synchronize_irq(); spin_lock() here
690          *      lets make it work first..
691          */
692          
693 #ifdef CONFIG_SMP
694         spin_lock_irqsave(&lp->lock, flags);
695 #endif
696   
697         {
698                 unsigned short *data = (unsigned short *)buf->data;
699
700                 lp->stats.tx_bytes += length;
701
702                 eexp_hw_tx_pio(dev,data,length);
703         }
704         dev_kfree_skb(buf);
705 #ifdef CONFIG_SMP
706         spin_unlock_irqrestore(&lp->lock, flags);
707 #endif
708         enable_irq(dev->irq);
709         return 0;
710 }
711
712 /*
713  * Handle an EtherExpress interrupt
714  * If we've finished initializing, start the RU and CU up.
715  * If we've already started, reap tx buffers, handle any received packets,
716  * check to make sure we've not become wedged.
717  */
718
719 /*
720  * Handle an EtherExpress interrupt
721  * If we've finished initializing, start the RU and CU up.
722  * If we've already started, reap tx buffers, handle any received packets,
723  * check to make sure we've not become wedged.
724  */
725
726 static unsigned short eexp_start_irq(struct net_device *dev,
727                                      unsigned short status)
728 {
729         unsigned short ack_cmd = SCB_ack(status);
730         struct net_local *lp = netdev_priv(dev);
731         unsigned short ioaddr = dev->base_addr;
732         if ((dev->flags & IFF_UP) && !(lp->started & STARTED_CU)) {
733                 short diag_status, tdr_status;
734                 while (SCB_CUstat(status)==2)
735                         status = scb_status(dev);
736 #if NET_DEBUG > 4
737                 printk("%s: CU went non-active (status %04x)\n",
738                        dev->name, status);
739 #endif
740
741                 outw(CONF_DIAG_RESULT & ~31, ioaddr + SM_PTR);
742                 diag_status = inw(ioaddr + SHADOW(CONF_DIAG_RESULT));
743                 if (diag_status & 1<<11) {
744                         printk(KERN_WARNING "%s: 82586 failed self-test\n", 
745                                dev->name);
746                 } else if (!(diag_status & 1<<13)) {
747                         printk(KERN_WARNING "%s: 82586 self-test failed to complete\n", dev->name);
748                 }
749
750                 outw(CONF_TDR_RESULT & ~31, ioaddr + SM_PTR);
751                 tdr_status = inw(ioaddr + SHADOW(CONF_TDR_RESULT));
752                 if (tdr_status & (TDR_SHORT|TDR_OPEN)) {
753                         printk(KERN_WARNING "%s: TDR reports cable %s at %d tick%s\n", dev->name, (tdr_status & TDR_SHORT)?"short":"broken", tdr_status & TDR_TIME, ((tdr_status & TDR_TIME) != 1) ? "s" : "");
754                 } 
755                 else if (tdr_status & TDR_XCVRPROBLEM) {
756                         printk(KERN_WARNING "%s: TDR reports transceiver problem\n", dev->name);
757                 }
758                 else if (tdr_status & TDR_LINKOK) {
759 #if NET_DEBUG > 4
760                         printk(KERN_DEBUG "%s: TDR reports link OK\n", dev->name);
761 #endif
762                 } else {
763                         printk("%s: TDR is ga-ga (status %04x)\n", dev->name,
764                                tdr_status);
765                 }
766                         
767                 lp->started |= STARTED_CU;
768                 scb_wrcbl(dev, lp->tx_link);
769                 /* if the RU isn't running, start it now */
770                 if (!(lp->started & STARTED_RU)) {
771                         ack_cmd |= SCB_RUstart;
772                         scb_wrrfa(dev, lp->rx_buf_start);
773                         lp->rx_ptr = lp->rx_buf_start;
774                         lp->started |= STARTED_RU;
775                 }
776                 ack_cmd |= SCB_CUstart | 0x2000;
777         }
778
779         if ((dev->flags & IFF_UP) && !(lp->started & STARTED_RU) && SCB_RUstat(status)==4) 
780                 lp->started|=STARTED_RU;
781
782         return ack_cmd;
783 }
784
785 static void eexp_cmd_clear(struct net_device *dev)
786 {
787         unsigned long int oldtime = jiffies;
788         while (scb_rdcmd(dev) && ((jiffies-oldtime)<10));
789         if (scb_rdcmd(dev)) {
790                 printk("%s: command didn't clear\n", dev->name);
791         }
792 }
793         
794 static irqreturn_t eexp_irq(int irq, void *dev_info, struct pt_regs *regs)
795 {
796         struct net_device *dev = dev_info;
797         struct net_local *lp;
798         unsigned short ioaddr,status,ack_cmd;
799         unsigned short old_read_ptr, old_write_ptr;
800
801         if (dev==NULL)
802         {
803                 printk(KERN_WARNING "eexpress: irq %d for unknown device\n",
804                        irq);
805                 return IRQ_NONE;
806         }
807
808         lp = netdev_priv(dev);
809         ioaddr = dev->base_addr;
810
811         spin_lock(&lp->lock);
812
813         old_read_ptr = inw(ioaddr+READ_PTR);
814         old_write_ptr = inw(ioaddr+WRITE_PTR);
815
816         outb(SIRQ_dis|irqrmap[irq],ioaddr+SET_IRQ);
817
818         
819         status = scb_status(dev);
820
821 #if NET_DEBUG > 4
822         printk(KERN_DEBUG "%s: interrupt (status %x)\n", dev->name, status);
823 #endif
824
825         if (lp->started == (STARTED_CU | STARTED_RU)) {
826
827                 do {
828                         eexp_cmd_clear(dev);
829
830                         ack_cmd = SCB_ack(status);
831                         scb_command(dev, ack_cmd);
832                         outb(0,ioaddr+SIGNAL_CA);
833
834                         eexp_cmd_clear(dev);
835
836                         if (SCB_complete(status)) {
837                                 if (!eexp_hw_lasttxstat(dev)) {
838                                         printk("%s: tx interrupt but no status\n", dev->name);
839                                 }
840                         }
841                         
842                         if (SCB_rxdframe(status)) 
843                                 eexp_hw_rx_pio(dev);
844
845                         status = scb_status(dev);
846                 } while (status & 0xc000);
847
848                 if (SCB_RUdead(status)) 
849                 {
850                         printk(KERN_WARNING "%s: RU stopped: status %04x\n",
851                                dev->name,status);
852 #if 0
853                         printk(KERN_WARNING "%s: cur_rfd=%04x, cur_rbd=%04x\n", dev->name, lp->cur_rfd, lp->cur_rbd);
854                         outw(lp->cur_rfd, ioaddr+READ_PTR);
855                         printk(KERN_WARNING "%s: [%04x]\n", dev->name, inw(ioaddr+DATAPORT));
856                         outw(lp->cur_rfd+6, ioaddr+READ_PTR);
857                         printk(KERN_WARNING "%s: rbd is %04x\n", dev->name, rbd= inw(ioaddr+DATAPORT));
858                         outw(rbd, ioaddr+READ_PTR);
859                         printk(KERN_WARNING "%s: [%04x %04x] ", dev->name, inw(ioaddr+DATAPORT), inw(ioaddr+DATAPORT));
860                         outw(rbd+8, ioaddr+READ_PTR);
861                         printk("[%04x]\n", inw(ioaddr+DATAPORT));
862 #endif
863                         lp->stats.rx_errors++;
864 #if 1
865                         eexp_hw_rxinit(dev);
866 #else
867                         lp->cur_rfd = lp->first_rfd;
868 #endif
869                         scb_wrrfa(dev, lp->rx_buf_start);
870                         scb_command(dev, SCB_RUstart);
871                         outb(0,ioaddr+SIGNAL_CA);
872                 } 
873         } else {
874                 if (status & 0x8000) 
875                         ack_cmd = eexp_start_irq(dev, status);
876                 else
877                         ack_cmd = SCB_ack(status);
878                 scb_command(dev, ack_cmd);
879                 outb(0,ioaddr+SIGNAL_CA);
880         }
881
882         eexp_cmd_clear(dev);
883
884         outb(SIRQ_en|irqrmap[irq],ioaddr+SET_IRQ); 
885
886 #if NET_DEBUG > 6 
887         printk("%s: leaving eexp_irq()\n", dev->name);
888 #endif
889         outw(old_read_ptr, ioaddr+READ_PTR);
890         outw(old_write_ptr, ioaddr+WRITE_PTR);
891         
892         spin_unlock(&lp->lock);
893         return IRQ_HANDLED;
894 }
895
896 /*
897  * Hardware access functions
898  */
899
900 /*
901  * Set the cable type to use.
902  */
903
904 static void eexp_hw_set_interface(struct net_device *dev)
905 {
906         unsigned char oldval = inb(dev->base_addr + 0x300e);
907         oldval &= ~0x82;
908         switch (dev->if_port) {
909         case TPE:
910                 oldval |= 0x2;
911         case BNC:
912                 oldval |= 0x80;
913                 break;
914         }
915         outb(oldval, dev->base_addr+0x300e);
916         mdelay(20);
917 }
918
919 /*
920  * Check all the receive buffers, and hand any received packets
921  * to the upper levels. Basic sanity check on each frame
922  * descriptor, though we don't bother trying to fix broken ones.
923  */
924
925 static void eexp_hw_rx_pio(struct net_device *dev)
926 {
927         struct net_local *lp = netdev_priv(dev);
928         unsigned short rx_block = lp->rx_ptr;
929         unsigned short boguscount = lp->num_rx_bufs;
930         unsigned short ioaddr = dev->base_addr;
931         unsigned short status;
932
933 #if NET_DEBUG > 6
934         printk(KERN_DEBUG "%s: eexp_hw_rx()\n", dev->name);
935 #endif
936
937         do {
938                 unsigned short rfd_cmd, rx_next, pbuf, pkt_len;
939   
940                 outw(rx_block, ioaddr + READ_PTR);
941                 status = inw(ioaddr + DATAPORT);
942
943                 if (FD_Done(status))
944                 {
945                         rfd_cmd = inw(ioaddr + DATAPORT);
946                         rx_next = inw(ioaddr + DATAPORT);
947                         pbuf = inw(ioaddr + DATAPORT);
948  
949                         outw(pbuf, ioaddr + READ_PTR);
950                         pkt_len = inw(ioaddr + DATAPORT);
951
952                         if (rfd_cmd!=0x0000)
953                         {
954                                 printk(KERN_WARNING "%s: rfd_cmd not zero:0x%04x\n",
955                                        dev->name, rfd_cmd);
956                                 continue;
957                         }
958                         else if (pbuf!=rx_block+0x16)
959                         {
960                                 printk(KERN_WARNING "%s: rfd and rbd out of sync 0x%04x 0x%04x\n", 
961                                        dev->name, rx_block+0x16, pbuf);
962                                 continue;
963                         }
964                         else if ((pkt_len & 0xc000)!=0xc000) 
965                         {
966                                 printk(KERN_WARNING "%s: EOF or F not set on received buffer (%04x)\n",
967                                        dev->name, pkt_len & 0xc000);
968                                 continue;
969                         }
970                         else if (!FD_OK(status)) 
971                         {
972                                 lp->stats.rx_errors++;
973                                 if (FD_CRC(status))
974                                         lp->stats.rx_crc_errors++;
975                                 if (FD_Align(status))
976                                         lp->stats.rx_frame_errors++;
977                                 if (FD_Resrc(status))
978                                         lp->stats.rx_fifo_errors++;
979                                 if (FD_DMA(status))
980                                         lp->stats.rx_over_errors++;
981                                 if (FD_Short(status))
982                                         lp->stats.rx_length_errors++;
983                         }
984                         else
985                         {
986                                 struct sk_buff *skb;
987                                 pkt_len &= 0x3fff;
988                                 skb = dev_alloc_skb(pkt_len+16);
989                                 if (skb == NULL)
990                                 {
991                                         printk(KERN_WARNING "%s: Memory squeeze, dropping packet\n",dev->name);
992                                         lp->stats.rx_dropped++;
993                                         break;
994                                 }
995                                 skb->dev = dev;
996                                 skb_reserve(skb, 2);
997                                 outw(pbuf+10, ioaddr+READ_PTR);
998                                 insw(ioaddr+DATAPORT, skb_put(skb,pkt_len),(pkt_len+1)>>1);
999                                 skb->protocol = eth_type_trans(skb,dev);
1000                                 netif_rx(skb);
1001                                 dev->last_rx = jiffies;
1002                                 lp->stats.rx_packets++;
1003                                 lp->stats.rx_bytes += pkt_len;
1004                         }
1005                         outw(rx_block, ioaddr+WRITE_PTR);
1006                         outw(0, ioaddr+DATAPORT);
1007                         outw(0, ioaddr+DATAPORT);
1008                         rx_block = rx_next;
1009                 }
1010         } while (FD_Done(status) && boguscount--);
1011         lp->rx_ptr = rx_block;
1012 }
1013
1014 /*
1015  * Hand a packet to the card for transmission
1016  * If we get here, we MUST have already checked
1017  * to make sure there is room in the transmit
1018  * buffer region.
1019  */
1020
1021 static void eexp_hw_tx_pio(struct net_device *dev, unsigned short *buf,
1022                        unsigned short len)
1023 {
1024         struct net_local *lp = netdev_priv(dev);
1025         unsigned short ioaddr = dev->base_addr;
1026
1027         if (LOCKUP16 || lp->width) {
1028                 /* Stop the CU so that there is no chance that it
1029                    jumps off to a bogus address while we are writing the
1030                    pointer to the next transmit packet in 8-bit mode -- 
1031                    this eliminates the "CU wedged" errors in 8-bit mode.
1032                    (Zoltan Szilagyi 10-12-96) */ 
1033                 scb_command(dev, SCB_CUsuspend);
1034                 outw(0xFFFF, ioaddr+SIGNAL_CA);
1035         }
1036
1037         outw(lp->tx_head, ioaddr + WRITE_PTR);
1038
1039         outw(0x0000, ioaddr + DATAPORT);
1040         outw(Cmd_INT|Cmd_Xmit, ioaddr + DATAPORT);
1041         outw(lp->tx_head+0x08, ioaddr + DATAPORT);
1042         outw(lp->tx_head+0x0e, ioaddr + DATAPORT);
1043
1044         outw(0x0000, ioaddr + DATAPORT);
1045         outw(0x0000, ioaddr + DATAPORT);
1046         outw(lp->tx_head+0x08, ioaddr + DATAPORT);
1047
1048         outw(0x8000|len, ioaddr + DATAPORT);
1049         outw(-1, ioaddr + DATAPORT);
1050         outw(lp->tx_head+0x16, ioaddr + DATAPORT);
1051         outw(0, ioaddr + DATAPORT);
1052
1053         outsw(ioaddr + DATAPORT, buf, (len+1)>>1);
1054
1055         outw(lp->tx_tail+0xc, ioaddr + WRITE_PTR);
1056         outw(lp->tx_head, ioaddr + DATAPORT);
1057
1058         dev->trans_start = jiffies;
1059         lp->tx_tail = lp->tx_head;
1060         if (lp->tx_head==TX_BUF_START+((lp->num_tx_bufs-1)*TX_BUF_SIZE))
1061                 lp->tx_head = TX_BUF_START;
1062         else
1063                 lp->tx_head += TX_BUF_SIZE;
1064         if (lp->tx_head != lp->tx_reap)
1065                 netif_wake_queue(dev);
1066                 
1067         if (LOCKUP16 || lp->width) {
1068                 /* Restart the CU so that the packet can actually
1069                    be transmitted. (Zoltan Szilagyi 10-12-96) */
1070                 scb_command(dev, SCB_CUresume);
1071                 outw(0xFFFF, ioaddr+SIGNAL_CA);
1072         }
1073
1074         lp->stats.tx_packets++;
1075         lp->last_tx = jiffies;
1076 }
1077
1078 /*
1079  * Sanity check the suspected EtherExpress card
1080  * Read hardware address, reset card, size memory and initialize buffer
1081  * memory pointers. These are held in dev->priv, in case someone has more
1082  * than one card in a machine.
1083  */
1084
1085 static int __init eexp_hw_probe(struct net_device *dev, unsigned short ioaddr)
1086 {
1087         unsigned short hw_addr[3];
1088         unsigned char buswidth;
1089         unsigned int memory_size;
1090         int i;
1091         unsigned short xsum = 0;
1092         struct net_local *lp = netdev_priv(dev);
1093
1094         printk("%s: EtherExpress 16 at %#x ",dev->name,ioaddr);
1095
1096         outb(ASIC_RST, ioaddr+EEPROM_Ctrl);
1097         outb(0, ioaddr+EEPROM_Ctrl);
1098         udelay(500);
1099         outb(i586_RST, ioaddr+EEPROM_Ctrl);
1100
1101         hw_addr[0] = eexp_hw_readeeprom(ioaddr,2);
1102         hw_addr[1] = eexp_hw_readeeprom(ioaddr,3);
1103         hw_addr[2] = eexp_hw_readeeprom(ioaddr,4);
1104
1105         /* Standard Address or Compaq LTE Address */
1106         if (!((hw_addr[2]==0x00aa && ((hw_addr[1] & 0xff00)==0x0000)) ||
1107               (hw_addr[2]==0x0080 && ((hw_addr[1] & 0xff00)==0x5F00)))) 
1108         {
1109                 printk(" rejected: invalid address %04x%04x%04x\n",
1110                         hw_addr[2],hw_addr[1],hw_addr[0]);
1111                 return -ENODEV;
1112         }
1113
1114         /* Calculate the EEPROM checksum.  Carry on anyway if it's bad,
1115          * though.
1116          */
1117         for (i = 0; i < 64; i++)
1118                 xsum += eexp_hw_readeeprom(ioaddr, i);
1119         if (xsum != 0xbaba)
1120                 printk(" (bad EEPROM xsum 0x%02x)", xsum);
1121
1122         dev->base_addr = ioaddr;
1123         for ( i=0 ; i<6 ; i++ )
1124                 dev->dev_addr[i] = ((unsigned char *)hw_addr)[5-i];
1125
1126         {
1127                 static char irqmap[]={0, 9, 3, 4, 5, 10, 11, 0};
1128                 unsigned short setupval = eexp_hw_readeeprom(ioaddr,0);
1129
1130                 /* Use the IRQ from EEPROM if none was given */
1131                 if (!dev->irq)
1132                         dev->irq = irqmap[setupval>>13];
1133
1134                 if (dev->if_port == 0xff) {
1135                         dev->if_port = !(setupval & 0x1000) ? AUI :
1136                                 eexp_hw_readeeprom(ioaddr,5) & 0x1 ? TPE : BNC;
1137                 }
1138
1139                 buswidth = !((setupval & 0x400) >> 10);
1140         }
1141
1142         memset(lp, 0, sizeof(struct net_local));
1143         spin_lock_init(&lp->lock);
1144
1145         printk("(IRQ %d, %s connector, %d-bit bus", dev->irq, 
1146                eexp_ifmap[dev->if_port], buswidth?8:16);
1147  
1148         if (!request_region(dev->base_addr + 0x300e, 1, "EtherExpress"))
1149                 return -EBUSY;
1150
1151         eexp_hw_set_interface(dev);
1152  
1153         release_region(dev->base_addr + 0x300e, 1);
1154   
1155         /* Find out how much RAM we have on the card */
1156         outw(0, dev->base_addr + WRITE_PTR);
1157         for (i = 0; i < 32768; i++)
1158                 outw(0, dev->base_addr + DATAPORT);
1159
1160         for (memory_size = 0; memory_size < 64; memory_size++)
1161         {
1162                 outw(memory_size<<10, dev->base_addr + READ_PTR);
1163                 if (inw(dev->base_addr+DATAPORT))
1164                         break;
1165                 outw(memory_size<<10, dev->base_addr + WRITE_PTR);
1166                 outw(memory_size | 0x5000, dev->base_addr+DATAPORT);
1167                 outw(memory_size<<10, dev->base_addr + READ_PTR);
1168                 if (inw(dev->base_addr+DATAPORT) != (memory_size | 0x5000))
1169                         break;
1170         }
1171
1172         /* Sort out the number of buffers.  We may have 16, 32, 48 or 64k
1173          * of RAM to play with.
1174          */
1175         lp->num_tx_bufs = 4;
1176         lp->rx_buf_end = 0x3ff6;
1177         switch (memory_size)
1178         {
1179         case 64:
1180                 lp->rx_buf_end += 0x4000;
1181         case 48:
1182                 lp->num_tx_bufs += 4;
1183                 lp->rx_buf_end += 0x4000;
1184         case 32:
1185                 lp->rx_buf_end += 0x4000;
1186         case 16:
1187                 printk(", %dk RAM)\n", memory_size);
1188                 break;
1189         default:
1190                 printk(") bad memory size (%dk).\n", memory_size);
1191                 return -ENODEV;
1192                 break;
1193         }
1194
1195         lp->rx_buf_start = TX_BUF_START + (lp->num_tx_bufs*TX_BUF_SIZE);
1196         lp->width = buswidth;
1197
1198         dev->open = eexp_open;
1199         dev->stop = eexp_close;
1200         dev->hard_start_xmit = eexp_xmit;
1201         dev->get_stats = eexp_stats;
1202         dev->set_multicast_list = &eexp_set_multicast;
1203         dev->tx_timeout = eexp_timeout;
1204         dev->watchdog_timeo = 2*HZ;
1205
1206         return register_netdev(dev);
1207 }
1208
1209 /*
1210  * Read a word from the EtherExpress on-board serial EEPROM.
1211  * The EEPROM contains 64 words of 16 bits.
1212  */
1213 static unsigned short __init eexp_hw_readeeprom(unsigned short ioaddr,
1214                                                     unsigned char location)
1215 {
1216         unsigned short cmd = 0x180|(location&0x7f);
1217         unsigned short rval = 0,wval = EC_CS|i586_RST;
1218         int i;
1219
1220         outb(EC_CS|i586_RST,ioaddr+EEPROM_Ctrl);
1221         for (i=0x100 ; i ; i>>=1 )
1222         {
1223                 if (cmd&i)
1224                         wval |= EC_Wr;
1225                 else
1226                         wval &= ~EC_Wr;
1227
1228                 outb(wval,ioaddr+EEPROM_Ctrl);
1229                 outb(wval|EC_Clk,ioaddr+EEPROM_Ctrl);
1230                 eeprom_delay();
1231                 outb(wval,ioaddr+EEPROM_Ctrl);
1232                 eeprom_delay();
1233         }
1234         wval &= ~EC_Wr;
1235         outb(wval,ioaddr+EEPROM_Ctrl);
1236         for (i=0x8000 ; i ; i>>=1 )
1237         {
1238                 outb(wval|EC_Clk,ioaddr+EEPROM_Ctrl);
1239                 eeprom_delay();
1240                 if (inb(ioaddr+EEPROM_Ctrl)&EC_Rd)
1241                         rval |= i;
1242                 outb(wval,ioaddr+EEPROM_Ctrl);
1243                 eeprom_delay();
1244         }
1245         wval &= ~EC_CS;
1246         outb(wval|EC_Clk,ioaddr+EEPROM_Ctrl);
1247         eeprom_delay();
1248         outb(wval,ioaddr+EEPROM_Ctrl);
1249         eeprom_delay();
1250         return rval;
1251 }
1252
1253 /*
1254  * Reap tx buffers and return last transmit status.
1255  * if ==0 then either:
1256  *    a) we're not transmitting anything, so why are we here?
1257  *    b) we've died.
1258  * otherwise, Stat_Busy(return) means we've still got some packets
1259  * to transmit, Stat_Done(return) means our buffers should be empty
1260  * again
1261  */
1262
1263 static unsigned short eexp_hw_lasttxstat(struct net_device *dev)
1264 {
1265         struct net_local *lp = netdev_priv(dev);
1266         unsigned short tx_block = lp->tx_reap;
1267         unsigned short status;
1268
1269         if (!netif_queue_stopped(dev) && lp->tx_head==lp->tx_reap)
1270                 return 0x0000;
1271
1272         do
1273         {
1274                 outw(tx_block & ~31, dev->base_addr + SM_PTR);
1275                 status = inw(dev->base_addr + SHADOW(tx_block));
1276                 if (!Stat_Done(status))
1277                 {
1278                         lp->tx_link = tx_block;
1279                         return status;
1280                 }
1281                 else
1282                 {
1283                         lp->last_tx_restart = 0;
1284                         lp->stats.collisions += Stat_NoColl(status);
1285                         if (!Stat_OK(status))
1286                         {
1287                                 char *whatsup = NULL;
1288                                 lp->stats.tx_errors++;
1289                                 if (Stat_Abort(status)) 
1290                                         lp->stats.tx_aborted_errors++;
1291                                 if (Stat_TNoCar(status)) {
1292                                         whatsup = "aborted, no carrier";
1293                                         lp->stats.tx_carrier_errors++;
1294                                 }
1295                                 if (Stat_TNoCTS(status)) {
1296                                         whatsup = "aborted, lost CTS";
1297                                         lp->stats.tx_carrier_errors++;
1298                                 }
1299                                 if (Stat_TNoDMA(status)) {
1300                                         whatsup = "FIFO underran";
1301                                         lp->stats.tx_fifo_errors++;
1302                                 }
1303                                 if (Stat_TXColl(status)) {
1304                                         whatsup = "aborted, too many collisions";
1305                                         lp->stats.tx_aborted_errors++;
1306                                 }
1307                                 if (whatsup)
1308                                         printk(KERN_INFO "%s: transmit %s\n",
1309                                                dev->name, whatsup);
1310                         }
1311                         else
1312                                 lp->stats.tx_packets++;
1313                 }
1314                 if (tx_block == TX_BUF_START+((lp->num_tx_bufs-1)*TX_BUF_SIZE))
1315                         lp->tx_reap = tx_block = TX_BUF_START;
1316                 else
1317                         lp->tx_reap = tx_block += TX_BUF_SIZE;
1318                 netif_wake_queue(dev);
1319         }
1320         while (lp->tx_reap != lp->tx_head);
1321
1322         lp->tx_link = lp->tx_tail + 0x08;
1323
1324         return status;
1325 }
1326
1327 /*
1328  * This should never happen. It is called when some higher routine detects
1329  * that the CU has stopped, to try to restart it from the last packet we knew
1330  * we were working on, or the idle loop if we had finished for the time.
1331  */
1332
1333 static void eexp_hw_txrestart(struct net_device *dev)
1334 {
1335         struct net_local *lp = netdev_priv(dev);
1336         unsigned short ioaddr = dev->base_addr;
1337
1338         lp->last_tx_restart = lp->tx_link;
1339         scb_wrcbl(dev, lp->tx_link);
1340         scb_command(dev, SCB_CUstart);
1341         outb(0,ioaddr+SIGNAL_CA);
1342
1343         {
1344                 unsigned short boguscount=50,failcount=5;
1345                 while (!scb_status(dev))
1346                 {
1347                         if (!--boguscount)
1348                         {
1349                                 if (--failcount)
1350                                 {
1351                                         printk(KERN_WARNING "%s: CU start timed out, status %04x, cmd %04x\n", dev->name, scb_status(dev), scb_rdcmd(dev));
1352                                         scb_wrcbl(dev, lp->tx_link);
1353                                         scb_command(dev, SCB_CUstart);
1354                                         outb(0,ioaddr+SIGNAL_CA);
1355                                         boguscount = 100;
1356                                 }
1357                                 else
1358                                 {
1359                                         printk(KERN_WARNING "%s: Failed to restart CU, resetting board...\n",dev->name);
1360                                         eexp_hw_init586(dev);
1361                                         netif_wake_queue(dev);
1362                                         return;
1363                                 }
1364                         }
1365                 }
1366         }
1367 }
1368
1369 /*
1370  * Writes down the list of transmit buffers into card memory.  Each
1371  * entry consists of an 82586 transmit command, followed by a jump
1372  * pointing to itself.  When we want to transmit a packet, we write
1373  * the data into the appropriate transmit buffer and then modify the
1374  * preceding jump to point at the new transmit command.  This means that
1375  * the 586 command unit is continuously active.
1376  */
1377
1378 static void eexp_hw_txinit(struct net_device *dev)
1379 {
1380         struct net_local *lp = netdev_priv(dev);
1381         unsigned short tx_block = TX_BUF_START;
1382         unsigned short curtbuf;
1383         unsigned short ioaddr = dev->base_addr;
1384
1385         for ( curtbuf=0 ; curtbuf<lp->num_tx_bufs ; curtbuf++ )
1386         {
1387                 outw(tx_block, ioaddr + WRITE_PTR);
1388
1389                 outw(0x0000, ioaddr + DATAPORT);
1390                 outw(Cmd_INT|Cmd_Xmit, ioaddr + DATAPORT);
1391                 outw(tx_block+0x08, ioaddr + DATAPORT);
1392                 outw(tx_block+0x0e, ioaddr + DATAPORT);
1393
1394                 outw(0x0000, ioaddr + DATAPORT);
1395                 outw(0x0000, ioaddr + DATAPORT);
1396                 outw(tx_block+0x08, ioaddr + DATAPORT);
1397
1398                 outw(0x8000, ioaddr + DATAPORT);
1399                 outw(-1, ioaddr + DATAPORT);
1400                 outw(tx_block+0x16, ioaddr + DATAPORT);
1401                 outw(0x0000, ioaddr + DATAPORT);
1402
1403                 tx_block += TX_BUF_SIZE;
1404         }
1405         lp->tx_head = TX_BUF_START;
1406         lp->tx_reap = TX_BUF_START;
1407         lp->tx_tail = tx_block - TX_BUF_SIZE;
1408         lp->tx_link = lp->tx_tail + 0x08;
1409         lp->rx_buf_start = tx_block;
1410
1411 }
1412
1413 /*
1414  * Write the circular list of receive buffer descriptors to card memory.
1415  * The end of the list isn't marked, which means that the 82586 receive
1416  * unit will loop until buffers become available (this avoids it giving us
1417  * "out of resources" messages).
1418  */
1419
1420 static void eexp_hw_rxinit(struct net_device *dev)
1421 {
1422         struct net_local *lp = netdev_priv(dev);
1423         unsigned short rx_block = lp->rx_buf_start;
1424         unsigned short ioaddr = dev->base_addr;
1425
1426         lp->num_rx_bufs = 0;
1427         lp->rx_first = lp->rx_ptr = rx_block;
1428         do
1429         {
1430                 lp->num_rx_bufs++;
1431
1432                 outw(rx_block, ioaddr + WRITE_PTR);
1433
1434                 outw(0, ioaddr + DATAPORT);  outw(0, ioaddr+DATAPORT);
1435                 outw(rx_block + RX_BUF_SIZE, ioaddr+DATAPORT);
1436                 outw(0xffff, ioaddr+DATAPORT);
1437
1438                 outw(0x0000, ioaddr+DATAPORT);
1439                 outw(0xdead, ioaddr+DATAPORT);
1440                 outw(0xdead, ioaddr+DATAPORT);
1441                 outw(0xdead, ioaddr+DATAPORT);
1442                 outw(0xdead, ioaddr+DATAPORT);
1443                 outw(0xdead, ioaddr+DATAPORT);
1444                 outw(0xdead, ioaddr+DATAPORT);
1445
1446                 outw(0x0000, ioaddr+DATAPORT);
1447                 outw(rx_block + RX_BUF_SIZE + 0x16, ioaddr+DATAPORT);
1448                 outw(rx_block + 0x20, ioaddr+DATAPORT);
1449                 outw(0, ioaddr+DATAPORT);
1450                 outw(RX_BUF_SIZE-0x20, ioaddr+DATAPORT);
1451
1452                 lp->rx_last = rx_block;
1453                 rx_block += RX_BUF_SIZE;
1454         } while (rx_block <= lp->rx_buf_end-RX_BUF_SIZE);
1455
1456
1457         /* Make first Rx frame descriptor point to first Rx buffer
1458            descriptor */
1459         outw(lp->rx_first + 6, ioaddr+WRITE_PTR);
1460         outw(lp->rx_first + 0x16, ioaddr+DATAPORT);
1461
1462         /* Close Rx frame descriptor ring */
1463         outw(lp->rx_last + 4, ioaddr+WRITE_PTR);
1464         outw(lp->rx_first, ioaddr+DATAPORT);
1465   
1466         /* Close Rx buffer descriptor ring */
1467         outw(lp->rx_last + 0x16 + 2, ioaddr+WRITE_PTR);
1468         outw(lp->rx_first + 0x16, ioaddr+DATAPORT);
1469         
1470 }
1471
1472 /*
1473  * Un-reset the 586, and start the configuration sequence. We don't wait for
1474  * this to finish, but allow the interrupt handler to start the CU and RU for
1475  * us.  We can't start the receive/transmission system up before we know that
1476  * the hardware is configured correctly.
1477  */
1478
1479 static void eexp_hw_init586(struct net_device *dev)
1480 {
1481         struct net_local *lp = netdev_priv(dev);
1482         unsigned short ioaddr = dev->base_addr;
1483         int i;
1484
1485 #if NET_DEBUG > 6
1486         printk("%s: eexp_hw_init586()\n", dev->name);
1487 #endif
1488
1489         lp->started = 0;
1490
1491         set_loopback(dev);
1492
1493         outb(SIRQ_dis|irqrmap[dev->irq],ioaddr+SET_IRQ);
1494
1495         /* Download the startup code */
1496         outw(lp->rx_buf_end & ~31, ioaddr + SM_PTR);
1497         outw(lp->width?0x0001:0x0000, ioaddr + 0x8006);
1498         outw(0x0000, ioaddr + 0x8008);
1499         outw(0x0000, ioaddr + 0x800a);
1500         outw(0x0000, ioaddr + 0x800c);
1501         outw(0x0000, ioaddr + 0x800e);
1502
1503         for (i = 0; i < (sizeof(start_code)); i+=32) {
1504                 int j;
1505                 outw(i, ioaddr + SM_PTR);
1506                 for (j = 0; j < 16; j+=2)
1507                         outw(start_code[(i+j)/2],
1508                              ioaddr+0x4000+j);
1509                 for (j = 0; j < 16; j+=2)
1510                         outw(start_code[(i+j+16)/2],
1511                              ioaddr+0x8000+j);
1512         }
1513
1514         /* Do we want promiscuous mode or multicast? */
1515         outw(CONF_PROMISC & ~31, ioaddr+SM_PTR);
1516         i = inw(ioaddr+SHADOW(CONF_PROMISC));
1517         outw((dev->flags & IFF_PROMISC)?(i|1):(i & ~1), 
1518              ioaddr+SHADOW(CONF_PROMISC));
1519         lp->was_promisc = dev->flags & IFF_PROMISC;
1520 #if 0
1521         eexp_setup_filter(dev);
1522 #endif
1523
1524         /* Write our hardware address */
1525         outw(CONF_HWADDR & ~31, ioaddr+SM_PTR);
1526         outw(((unsigned short *)dev->dev_addr)[0], ioaddr+SHADOW(CONF_HWADDR));
1527         outw(((unsigned short *)dev->dev_addr)[1], 
1528              ioaddr+SHADOW(CONF_HWADDR+2));
1529         outw(((unsigned short *)dev->dev_addr)[2],
1530              ioaddr+SHADOW(CONF_HWADDR+4));
1531
1532         eexp_hw_txinit(dev);
1533         eexp_hw_rxinit(dev);
1534
1535         outb(0,ioaddr+EEPROM_Ctrl);
1536         mdelay(5);
1537
1538         scb_command(dev, 0xf000);
1539         outb(0,ioaddr+SIGNAL_CA);
1540
1541         outw(0, ioaddr+SM_PTR);
1542
1543         {
1544                 unsigned short rboguscount=50,rfailcount=5;
1545                 while (inw(ioaddr+0x4000))
1546                 {
1547                         if (!--rboguscount)
1548                         {
1549                                 printk(KERN_WARNING "%s: i82586 reset timed out, kicking...\n",
1550                                         dev->name);
1551                                 scb_command(dev, 0);
1552                                 outb(0,ioaddr+SIGNAL_CA);
1553                                 rboguscount = 100;
1554                                 if (!--rfailcount)
1555                                 {
1556                                         printk(KERN_WARNING "%s: i82586 not responding, giving up.\n",
1557                                                 dev->name);
1558                                         return;
1559                                 }
1560                         }
1561                 }
1562         }
1563
1564         scb_wrcbl(dev, CONF_LINK);
1565         scb_command(dev, 0xf000|SCB_CUstart);
1566         outb(0,ioaddr+SIGNAL_CA);
1567
1568         {
1569                 unsigned short iboguscount=50,ifailcount=5;
1570                 while (!scb_status(dev))
1571                 {
1572                         if (!--iboguscount)
1573                         {
1574                                 if (--ifailcount)
1575                                 {
1576                                         printk(KERN_WARNING "%s: i82586 initialization timed out, status %04x, cmd %04x\n",
1577                                                 dev->name, scb_status(dev), scb_rdcmd(dev));
1578                                         scb_wrcbl(dev, CONF_LINK);
1579                                         scb_command(dev, 0xf000|SCB_CUstart);
1580                                         outb(0,ioaddr+SIGNAL_CA);
1581                                         iboguscount = 100;
1582                                 }
1583                                 else
1584                                 {
1585                                         printk(KERN_WARNING "%s: Failed to initialize i82586, giving up.\n",dev->name);
1586                                         return;
1587                                 }
1588                         }
1589                 }
1590         }
1591
1592         clear_loopback(dev);
1593         outb(SIRQ_en|irqrmap[dev->irq],ioaddr+SET_IRQ);
1594
1595         lp->init_time = jiffies;
1596 #if NET_DEBUG > 6
1597         printk("%s: leaving eexp_hw_init586()\n", dev->name);
1598 #endif
1599         return;
1600 }
1601
1602 static void eexp_setup_filter(struct net_device *dev)
1603 {
1604         struct dev_mc_list *dmi = dev->mc_list;
1605         unsigned short ioaddr = dev->base_addr;
1606         int count = dev->mc_count;
1607         int i;
1608         if (count > 8) {
1609                 printk(KERN_INFO "%s: too many multicast addresses (%d)\n",
1610                        dev->name, count);
1611                 count = 8;
1612         }
1613         
1614         outw(CONF_NR_MULTICAST & ~31, ioaddr+SM_PTR);
1615         outw(count, ioaddr+SHADOW(CONF_NR_MULTICAST));
1616         for (i = 0; i < count; i++) {
1617                 unsigned short *data = (unsigned short *)dmi->dmi_addr;
1618                 if (!dmi) {
1619                         printk(KERN_INFO "%s: too few multicast addresses\n", dev->name);
1620                         break;
1621                 }
1622                 if (dmi->dmi_addrlen != ETH_ALEN) {
1623                         printk(KERN_INFO "%s: invalid multicast address length given.\n", dev->name);
1624                         continue;
1625                 }
1626                 outw((CONF_MULTICAST+(6*i)) & ~31, ioaddr+SM_PTR);
1627                 outw(data[0], ioaddr+SHADOW(CONF_MULTICAST+(6*i)));
1628                 outw((CONF_MULTICAST+(6*i)+2) & ~31, ioaddr+SM_PTR);
1629                 outw(data[1], ioaddr+SHADOW(CONF_MULTICAST+(6*i)+2));
1630                 outw((CONF_MULTICAST+(6*i)+4) & ~31, ioaddr+SM_PTR);
1631                 outw(data[2], ioaddr+SHADOW(CONF_MULTICAST+(6*i)+4));
1632         }
1633 }
1634
1635 /*
1636  * Set or clear the multicast filter for this adaptor.
1637  */
1638 static void
1639 eexp_set_multicast(struct net_device *dev)
1640 {
1641         unsigned short ioaddr = dev->base_addr;
1642         struct net_local *lp = netdev_priv(dev);
1643         int kick = 0, i;
1644         if ((dev->flags & IFF_PROMISC) != lp->was_promisc) {
1645                 outw(CONF_PROMISC & ~31, ioaddr+SM_PTR);
1646                 i = inw(ioaddr+SHADOW(CONF_PROMISC));
1647                 outw((dev->flags & IFF_PROMISC)?(i|1):(i & ~1),
1648                      ioaddr+SHADOW(CONF_PROMISC));
1649                 lp->was_promisc = dev->flags & IFF_PROMISC;
1650                 kick = 1;
1651         }
1652         if (!(dev->flags & IFF_PROMISC)) {
1653                 eexp_setup_filter(dev);
1654                 if (lp->old_mc_count != dev->mc_count) {
1655                         kick = 1;
1656                         lp->old_mc_count = dev->mc_count;
1657                 }
1658         }
1659         if (kick) {
1660                 unsigned long oj;
1661                 scb_command(dev, SCB_CUsuspend);
1662                 outb(0, ioaddr+SIGNAL_CA);
1663                 outb(0, ioaddr+SIGNAL_CA);
1664 #if 0
1665                 printk("%s: waiting for CU to go suspended\n", dev->name);
1666 #endif
1667                 oj = jiffies;
1668                 while ((SCB_CUstat(scb_status(dev)) == 2) &&
1669                        ((jiffies-oj) < 2000));
1670                 if (SCB_CUstat(scb_status(dev)) == 2)
1671                         printk("%s: warning, CU didn't stop\n", dev->name);
1672                 lp->started &= ~(STARTED_CU);
1673                 scb_wrcbl(dev, CONF_LINK);
1674                 scb_command(dev, SCB_CUstart);
1675                 outb(0, ioaddr+SIGNAL_CA);
1676         }
1677 }
1678
1679
1680 /*
1681  * MODULE stuff
1682  */
1683
1684 #ifdef MODULE
1685
1686 #define EEXP_MAX_CARDS     4    /* max number of cards to support */
1687
1688 static struct net_device *dev_eexp[EEXP_MAX_CARDS];
1689 static int irq[EEXP_MAX_CARDS];
1690 static int io[EEXP_MAX_CARDS];
1691
1692 module_param_array(io, int, NULL, 0);
1693 module_param_array(irq, int, NULL, 0);
1694 MODULE_PARM_DESC(io, "EtherExpress 16 I/O base address(es)");
1695 MODULE_PARM_DESC(irq, "EtherExpress 16 IRQ number(s)");
1696 MODULE_LICENSE("GPL");
1697
1698
1699 /* Ideally the user would give us io=, irq= for every card.  If any parameters
1700  * are specified, we verify and then use them.  If no parameters are given, we
1701  * autoprobe for one card only.
1702  */
1703 int init_module(void)
1704 {
1705         struct net_device *dev;
1706         int this_dev, found = 0;
1707
1708         for (this_dev = 0; this_dev < EEXP_MAX_CARDS; this_dev++) {
1709                 dev = alloc_etherdev(sizeof(struct net_local));
1710                 dev->irq = irq[this_dev];
1711                 dev->base_addr = io[this_dev];
1712                 if (io[this_dev] == 0) {
1713                         if (this_dev)
1714                                 break;
1715                         printk(KERN_NOTICE "eexpress.c: Module autoprobe not recommended, give io=xx.\n");
1716                 }
1717                 if (do_express_probe(dev) == 0) {
1718                         dev_eexp[this_dev] = dev;
1719                         found++;
1720                         continue;
1721                 }
1722                 printk(KERN_WARNING "eexpress.c: Failed to register card at 0x%x.\n", io[this_dev]);
1723                 free_netdev(dev);
1724                 break;
1725         }
1726         if (found)
1727                 return 0;
1728         return -ENXIO;
1729 }
1730
1731 void cleanup_module(void)
1732 {
1733         int this_dev;
1734
1735         for (this_dev = 0; this_dev < EEXP_MAX_CARDS; this_dev++) {
1736                 struct net_device *dev = dev_eexp[this_dev];
1737                 if (dev) {
1738                         unregister_netdev(dev);
1739                         free_netdev(dev);
1740                 }
1741         }
1742 }
1743 #endif
1744
1745 /*
1746  * Local Variables:
1747  *  c-file-style: "linux"
1748  *  tab-width: 8
1749  * End:
1750  */