git.oblomov.eu Git - linux-2.6/blob - drivers/acpi/events/evgpeblk.c

   1 /******************************************************************************
   2  *
   3  * Module Name: evgpeblk - GPE block creation and initialization.
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2005, R. Byron Moore
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #include <acpi/acpi.h>
  45 #include <acpi/acevents.h>
  46 #include <acpi/acnamesp.h>
  47
  48 #define _COMPONENT          ACPI_EVENTS
  49 ACPI_MODULE_NAME("evgpeblk")
  50
  51 /* Local prototypes */
  52 static acpi_status
  53 acpi_ev_save_method_info(acpi_handle obj_handle,
  54                          u32 level, void *obj_desc, void **return_value);
  55
  56 static acpi_status
  57 acpi_ev_match_prw_and_gpe(acpi_handle obj_handle,
  58                           u32 level, void *info, void **return_value);
  59
  60 static struct acpi_gpe_xrupt_info *acpi_ev_get_gpe_xrupt_block(u32
  61                                                                interrupt_number);
  62
  63 static acpi_status
  64 acpi_ev_delete_gpe_xrupt(struct acpi_gpe_xrupt_info *gpe_xrupt);
  65
  66 static acpi_status
  67 acpi_ev_install_gpe_block(struct acpi_gpe_block_info *gpe_block,
  68                           u32 interrupt_number);
  69
  70 static acpi_status
  71 acpi_ev_create_gpe_info_blocks(struct acpi_gpe_block_info *gpe_block);
  72
  73 /*******************************************************************************
  74  *
  75  * FUNCTION:    acpi_ev_valid_gpe_event
  76  *
  77  * PARAMETERS:  gpe_event_info              - Info for this GPE
  78  *
  79  * RETURN:      TRUE if the gpe_event is valid
  80  *
  81  * DESCRIPTION: Validate a GPE event.  DO NOT CALL FROM INTERRUPT LEVEL.
  82  *              Should be called only when the GPE lists are semaphore locked
  83  *              and not subject to change.
  84  *
  85  ******************************************************************************/
  86
  87 u8 acpi_ev_valid_gpe_event(struct acpi_gpe_event_info *gpe_event_info)
  88 {
  89         struct acpi_gpe_xrupt_info *gpe_xrupt_block;
  90         struct acpi_gpe_block_info *gpe_block;
  91
  92         ACPI_FUNCTION_ENTRY();
  93
  94         /* No need for spin lock since we are not changing any list elements */
  95
  96         /* Walk the GPE interrupt levels */
  97
  98         gpe_xrupt_block = acpi_gbl_gpe_xrupt_list_head;
  99         while (gpe_xrupt_block) {
 100                 gpe_block = gpe_xrupt_block->gpe_block_list_head;
 101
 102                 /* Walk the GPE blocks on this interrupt level */
 103
 104                 while (gpe_block) {
 105                         if ((&gpe_block->event_info[0] <= gpe_event_info) &&
 106                             (&gpe_block->
 107                              event_info[((acpi_size) gpe_block->
 108                                          register_count) * 8] >
 109                              gpe_event_info)) {
 110                                 return (TRUE);
 111                         }
 112
 113                         gpe_block = gpe_block->next;
 114                 }
 115
 116                 gpe_xrupt_block = gpe_xrupt_block->next;
 117         }
 118
 119         return (FALSE);
 120 }
 121
 122 /*******************************************************************************
 123  *
 124  * FUNCTION:    acpi_ev_walk_gpe_list
 125  *
 126  * PARAMETERS:  gpe_walk_callback   - Routine called for each GPE block
 127  *
 128  * RETURN:      Status
 129  *
 130  * DESCRIPTION: Walk the GPE lists.
 131  *
 132  ******************************************************************************/
 133
 134 acpi_status acpi_ev_walk_gpe_list(ACPI_GPE_CALLBACK gpe_walk_callback)
 135 {
 136         struct acpi_gpe_block_info *gpe_block;
 137         struct acpi_gpe_xrupt_info *gpe_xrupt_info;
 138         acpi_status status = AE_OK;
 139         u32 flags;
 140
 141         ACPI_FUNCTION_TRACE("ev_walk_gpe_list");
 142
 143         flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
 144
 145         /* Walk the interrupt level descriptor list */
 146
 147         gpe_xrupt_info = acpi_gbl_gpe_xrupt_list_head;
 148         while (gpe_xrupt_info) {
 149                 /* Walk all Gpe Blocks attached to this interrupt level */
 150
 151                 gpe_block = gpe_xrupt_info->gpe_block_list_head;
 152                 while (gpe_block) {
 153                         /* One callback per GPE block */
 154
 155                         status = gpe_walk_callback(gpe_xrupt_info, gpe_block);
 156                         if (ACPI_FAILURE(status)) {
 157                                 goto unlock_and_exit;
 158                         }
 159
 160                         gpe_block = gpe_block->next;
 161                 }
 162
 163                 gpe_xrupt_info = gpe_xrupt_info->next;
 164         }
 165
 166       unlock_and_exit:
 167         acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
 168         return_ACPI_STATUS(status);
 169 }
 170
 171 /*******************************************************************************
 172  *
 173  * FUNCTION:    acpi_ev_delete_gpe_handlers
 174  *
 175  * PARAMETERS:  gpe_xrupt_info      - GPE Interrupt info
 176  *              gpe_block           - Gpe Block info
 177  *
 178  * RETURN:      Status
 179  *
 180  * DESCRIPTION: Delete all Handler objects found in the GPE data structs.
 181  *              Used only prior to termination.
 182  *
 183  ******************************************************************************/
 184
 185 acpi_status
 186 acpi_ev_delete_gpe_handlers(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
 187                             struct acpi_gpe_block_info *gpe_block)
 188 {
 189         struct acpi_gpe_event_info *gpe_event_info;
 190         acpi_native_uint i;
 191         acpi_native_uint j;
 192
 193         ACPI_FUNCTION_TRACE("ev_delete_gpe_handlers");
 194
 195         /* Examine each GPE Register within the block */
 196
 197         for (i = 0; i < gpe_block->register_count; i++) {
 198                 /* Now look at the individual GPEs in this byte register */
 199
 200                 for (j = 0; j < ACPI_GPE_REGISTER_WIDTH; j++) {
 201                         gpe_event_info =
 202                             &gpe_block->
 203                             event_info[(i * ACPI_GPE_REGISTER_WIDTH) + j];
 204
 205                         if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
 206                             ACPI_GPE_DISPATCH_HANDLER) {
 207                                 ACPI_MEM_FREE(gpe_event_info->dispatch.handler);
 208                                 gpe_event_info->dispatch.handler = NULL;
 209                                 gpe_event_info->flags &=
 210                                     ~ACPI_GPE_DISPATCH_MASK;
 211                         }
 212                 }
 213         }
 214
 215         return_ACPI_STATUS(AE_OK);
 216 }
 217
 218 /*******************************************************************************
 219  *
 220  * FUNCTION:    acpi_ev_save_method_info
 221  *
 222  * PARAMETERS:  Callback from walk_namespace
 223  *
 224  * RETURN:      Status
 225  *
 226  * DESCRIPTION: Called from acpi_walk_namespace. Expects each object to be a
 227  *              control method under the _GPE portion of the namespace.
 228  *              Extract the name and GPE type from the object, saving this
 229  *              information for quick lookup during GPE dispatch
 230  *
 231  *              The name of each GPE control method is of the form:
 232  *              "_Lxx" or "_Exx"
 233  *              Where:
 234  *                  L      - means that the GPE is level triggered
 235  *                  E      - means that the GPE is edge triggered
 236  *                  xx     - is the GPE number [in HEX]
 237  *
 238  ******************************************************************************/
 239
 240 static acpi_status
 241 acpi_ev_save_method_info(acpi_handle obj_handle,
 242                          u32 level, void *obj_desc, void **return_value)
 243 {
 244         struct acpi_gpe_block_info *gpe_block = (void *)obj_desc;
 245         struct acpi_gpe_event_info *gpe_event_info;
 246         u32 gpe_number;
 247         char name[ACPI_NAME_SIZE + 1];
 248         u8 type;
 249         acpi_status status;
 250
 251         ACPI_FUNCTION_TRACE("ev_save_method_info");
 252
 253         /*
 254          * _Lxx and _Exx GPE method support
 255          *
 256          * 1) Extract the name from the object and convert to a string
 257          */
 258         ACPI_MOVE_32_TO_32(name,
 259                            &((struct acpi_namespace_node *)obj_handle)->name.
 260                            integer);
 261         name[ACPI_NAME_SIZE] = 0;
 262
 263         /*
 264          * 2) Edge/Level determination is based on the 2nd character
 265          *    of the method name
 266          *
 267          * NOTE: Default GPE type is RUNTIME.  May be changed later to WAKE
 268          * if a _PRW object is found that points to this GPE.
 269          */
 270         switch (name[1]) {
 271         case 'L':
 272                 type = ACPI_GPE_LEVEL_TRIGGERED;
 273                 break;
 274
 275         case 'E':
 276                 type = ACPI_GPE_EDGE_TRIGGERED;
 277                 break;
 278
 279         default:
 280                 /* Unknown method type, just ignore it! */
 281
 282                 ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 283                                   "Unknown GPE method type: %s (name not of form _Lxx or _Exx)\n",
 284                                   name));
 285                 return_ACPI_STATUS(AE_OK);
 286         }
 287
 288         /* Convert the last two characters of the name to the GPE Number */
 289
 290         gpe_number = ACPI_STRTOUL(&name[2], NULL, 16);
 291         if (gpe_number == ACPI_UINT32_MAX) {
 292                 /* Conversion failed; invalid method, just ignore it */
 293
 294                 ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 295                                   "Could not extract GPE number from name: %s (name is not of form _Lxx or _Exx)\n",
 296                                   name));
 297                 return_ACPI_STATUS(AE_OK);
 298         }
 299
 300         /* Ensure that we have a valid GPE number for this GPE block */
 301
 302         if ((gpe_number < gpe_block->block_base_number) ||
 303             (gpe_number >=
 304              (gpe_block->block_base_number +
 305               (gpe_block->register_count * 8)))) {
 306                 /*
 307                  * Not valid for this GPE block, just ignore it
 308                  * However, it may be valid for a different GPE block, since GPE0 and GPE1
 309                  * methods both appear under \_GPE.
 310                  */
 311                 return_ACPI_STATUS(AE_OK);
 312         }
 313
 314         /*
 315          * Now we can add this information to the gpe_event_info block
 316          * for use during dispatch of this GPE.  Default type is RUNTIME, although
 317          * this may change when the _PRW methods are executed later.
 318          */
 319         gpe_event_info =
 320             &gpe_block->event_info[gpe_number - gpe_block->block_base_number];
 321
 322         gpe_event_info->flags = (u8) (type | ACPI_GPE_DISPATCH_METHOD |
 323                                       ACPI_GPE_TYPE_RUNTIME);
 324
 325         gpe_event_info->dispatch.method_node =
 326             (struct acpi_namespace_node *)obj_handle;
 327
 328         /* Update enable mask, but don't enable the HW GPE as of yet */
 329
 330         status = acpi_ev_enable_gpe(gpe_event_info, FALSE);
 331
 332         ACPI_DEBUG_PRINT((ACPI_DB_LOAD,
 333                           "Registered GPE method %s as GPE number 0x%.2X\n",
 334                           name, gpe_number));
 335         return_ACPI_STATUS(status);
 336 }
 337
 338 /*******************************************************************************
 339  *
 340  * FUNCTION:    acpi_ev_match_prw_and_gpe
 341  *
 342  * PARAMETERS:  Callback from walk_namespace
 343  *
 344  * RETURN:      Status.  NOTE: We ignore errors so that the _PRW walk is
 345  *              not aborted on a single _PRW failure.
 346  *
 347  * DESCRIPTION: Called from acpi_walk_namespace. Expects each object to be a
 348  *              Device.  Run the _PRW method.  If present, extract the GPE
 349  *              number and mark the GPE as a WAKE GPE.
 350  *
 351  ******************************************************************************/
 352
 353 static acpi_status
 354 acpi_ev_match_prw_and_gpe(acpi_handle obj_handle,
 355                           u32 level, void *info, void **return_value)
 356 {
 357         struct acpi_gpe_walk_info *gpe_info = (void *)info;
 358         struct acpi_namespace_node *gpe_device;
 359         struct acpi_gpe_block_info *gpe_block;
 360         struct acpi_namespace_node *target_gpe_device;
 361         struct acpi_gpe_event_info *gpe_event_info;
 362         union acpi_operand_object *pkg_desc;
 363         union acpi_operand_object *obj_desc;
 364         u32 gpe_number;
 365         acpi_status status;
 366
 367         ACPI_FUNCTION_TRACE("ev_match_prw_and_gpe");
 368
 369         /* Check for a _PRW method under this device */
 370
 371         status = acpi_ut_evaluate_object(obj_handle, METHOD_NAME__PRW,
 372                                          ACPI_BTYPE_PACKAGE, &pkg_desc);
 373         if (ACPI_FAILURE(status)) {
 374                 /* Ignore all errors from _PRW, we don't want to abort the subsystem */
 375
 376                 return_ACPI_STATUS(AE_OK);
 377         }
 378
 379         /* The returned _PRW package must have at least two elements */
 380
 381         if (pkg_desc->package.count < 2) {
 382                 goto cleanup;
 383         }
 384
 385         /* Extract pointers from the input context */
 386
 387         gpe_device = gpe_info->gpe_device;
 388         gpe_block = gpe_info->gpe_block;
 389
 390         /*
 391          * The _PRW object must return a package, we are only interested
 392          * in the first element
 393          */
 394         obj_desc = pkg_desc->package.elements[0];
 395
 396         if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_INTEGER) {
 397                 /* Use FADT-defined GPE device (from definition of _PRW) */
 398
 399                 target_gpe_device = acpi_gbl_fadt_gpe_device;
 400
 401                 /* Integer is the GPE number in the FADT described GPE blocks */
 402
 403                 gpe_number = (u32) obj_desc->integer.value;
 404         } else if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_PACKAGE) {
 405                 /* Package contains a GPE reference and GPE number within a GPE block */
 406
 407                 if ((obj_desc->package.count < 2) ||
 408                     (ACPI_GET_OBJECT_TYPE(obj_desc->package.elements[0]) !=
 409                      ACPI_TYPE_LOCAL_REFERENCE)
 410                     || (ACPI_GET_OBJECT_TYPE(obj_desc->package.elements[1]) !=
 411                         ACPI_TYPE_INTEGER)) {
 412                         goto cleanup;
 413                 }
 414
 415                 /* Get GPE block reference and decode */
 416
 417                 target_gpe_device =
 418                     obj_desc->package.elements[0]->reference.node;
 419                 gpe_number = (u32) obj_desc->package.elements[1]->integer.value;
 420         } else {
 421                 /* Unknown type, just ignore it */
 422
 423                 goto cleanup;
 424         }
 425
 426         /*
 427          * Is this GPE within this block?
 428          *
 429          * TRUE iff these conditions are true:
 430          *     1) The GPE devices match.
 431          *     2) The GPE index(number) is within the range of the Gpe Block
 432          *          associated with the GPE device.
 433          */
 434         if ((gpe_device == target_gpe_device) &&
 435             (gpe_number >= gpe_block->block_base_number) &&
 436             (gpe_number <
 437              gpe_block->block_base_number + (gpe_block->register_count * 8))) {
 438                 gpe_event_info =
 439                     &gpe_block->event_info[gpe_number -
 440                                            gpe_block->block_base_number];
 441
 442                 /* Mark GPE for WAKE-ONLY but WAKE_DISABLED */
 443
 444                 gpe_event_info->flags &=
 445                     ~(ACPI_GPE_WAKE_ENABLED | ACPI_GPE_RUN_ENABLED);
 446                 status =
 447                     acpi_ev_set_gpe_type(gpe_event_info, ACPI_GPE_TYPE_WAKE);
 448                 if (ACPI_FAILURE(status)) {
 449                         goto cleanup;
 450                 }
 451                 status =
 452                     acpi_ev_update_gpe_enable_masks(gpe_event_info,
 453                                                     ACPI_GPE_DISABLE);
 454         }
 455
 456       cleanup:
 457         acpi_ut_remove_reference(pkg_desc);
 458         return_ACPI_STATUS(AE_OK);
 459 }
 460
 461 /*******************************************************************************
 462  *
 463  * FUNCTION:    acpi_ev_get_gpe_xrupt_block
 464  *
 465  * PARAMETERS:  interrupt_number     - Interrupt for a GPE block
 466  *
 467  * RETURN:      A GPE interrupt block
 468  *
 469  * DESCRIPTION: Get or Create a GPE interrupt block.  There is one interrupt
 470  *              block per unique interrupt level used for GPEs.
 471  *              Should be called only when the GPE lists are semaphore locked
 472  *              and not subject to change.
 473  *
 474  ******************************************************************************/
 475
 476 static struct acpi_gpe_xrupt_info *acpi_ev_get_gpe_xrupt_block(u32
 477                                                                interrupt_number)
 478 {
 479         struct acpi_gpe_xrupt_info *next_gpe_xrupt;
 480         struct acpi_gpe_xrupt_info *gpe_xrupt;
 481         acpi_status status;
 482         u32 flags;
 483
 484         ACPI_FUNCTION_TRACE("ev_get_gpe_xrupt_block");
 485
 486         /* No need for lock since we are not changing any list elements here */
 487
 488         next_gpe_xrupt = acpi_gbl_gpe_xrupt_list_head;
 489         while (next_gpe_xrupt) {
 490                 if (next_gpe_xrupt->interrupt_number == interrupt_number) {
 491                         return_PTR(next_gpe_xrupt);
 492                 }
 493
 494                 next_gpe_xrupt = next_gpe_xrupt->next;
 495         }
 496
 497         /* Not found, must allocate a new xrupt descriptor */
 498
 499         gpe_xrupt = ACPI_MEM_CALLOCATE(sizeof(struct acpi_gpe_xrupt_info));
 500         if (!gpe_xrupt) {
 501                 return_PTR(NULL);
 502         }
 503
 504         gpe_xrupt->interrupt_number = interrupt_number;
 505
 506         /* Install new interrupt descriptor with spin lock */
 507
 508         flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
 509         if (acpi_gbl_gpe_xrupt_list_head) {
 510                 next_gpe_xrupt = acpi_gbl_gpe_xrupt_list_head;
 511                 while (next_gpe_xrupt->next) {
 512                         next_gpe_xrupt = next_gpe_xrupt->next;
 513                 }
 514
 515                 next_gpe_xrupt->next = gpe_xrupt;
 516                 gpe_xrupt->previous = next_gpe_xrupt;
 517         } else {
 518                 acpi_gbl_gpe_xrupt_list_head = gpe_xrupt;
 519         }
 520         acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
 521
 522         /* Install new interrupt handler if not SCI_INT */
 523
 524         if (interrupt_number != acpi_gbl_FADT->sci_int) {
 525                 status = acpi_os_install_interrupt_handler(interrupt_number,
 526                                                            acpi_ev_gpe_xrupt_handler,
 527                                                            gpe_xrupt);
 528                 if (ACPI_FAILURE(status)) {
 529                         ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 530                                           "Could not install GPE interrupt handler at level 0x%X\n",
 531                                           interrupt_number));
 532                         return_PTR(NULL);
 533                 }
 534         }
 535
 536         return_PTR(gpe_xrupt);
 537 }
 538
 539 /*******************************************************************************
 540  *
 541  * FUNCTION:    acpi_ev_delete_gpe_xrupt
 542  *
 543  * PARAMETERS:  gpe_xrupt       - A GPE interrupt info block
 544  *
 545  * RETURN:      Status
 546  *
 547  * DESCRIPTION: Remove and free a gpe_xrupt block. Remove an associated
 548  *              interrupt handler if not the SCI interrupt.
 549  *
 550  ******************************************************************************/
 551
 552 static acpi_status
 553 acpi_ev_delete_gpe_xrupt(struct acpi_gpe_xrupt_info *gpe_xrupt)
 554 {
 555         acpi_status status;
 556         u32 flags;
 557
 558         ACPI_FUNCTION_TRACE("ev_delete_gpe_xrupt");
 559
 560         /* We never want to remove the SCI interrupt handler */
 561
 562         if (gpe_xrupt->interrupt_number == acpi_gbl_FADT->sci_int) {
 563                 gpe_xrupt->gpe_block_list_head = NULL;
 564                 return_ACPI_STATUS(AE_OK);
 565         }
 566
 567         /* Disable this interrupt */
 568
 569         status = acpi_os_remove_interrupt_handler(gpe_xrupt->interrupt_number,
 570                                                   acpi_ev_gpe_xrupt_handler);
 571         if (ACPI_FAILURE(status)) {
 572                 return_ACPI_STATUS(status);
 573         }
 574
 575         /* Unlink the interrupt block with lock */
 576
 577         flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
 578         if (gpe_xrupt->previous) {
 579                 gpe_xrupt->previous->next = gpe_xrupt->next;
 580         }
 581
 582         if (gpe_xrupt->next) {
 583                 gpe_xrupt->next->previous = gpe_xrupt->previous;
 584         }
 585         acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
 586
 587         /* Free the block */
 588
 589         ACPI_MEM_FREE(gpe_xrupt);
 590         return_ACPI_STATUS(AE_OK);
 591 }
 592
 593 /*******************************************************************************
 594  *
 595  * FUNCTION:    acpi_ev_install_gpe_block
 596  *
 597  * PARAMETERS:  gpe_block       - New GPE block
 598  *              interrupt_number - Xrupt to be associated with this GPE block
 599  *
 600  * RETURN:      Status
 601  *
 602  * DESCRIPTION: Install new GPE block with mutex support
 603  *
 604  ******************************************************************************/
 605
 606 static acpi_status
 607 acpi_ev_install_gpe_block(struct acpi_gpe_block_info *gpe_block,
 608                           u32 interrupt_number)
 609 {
 610         struct acpi_gpe_block_info *next_gpe_block;
 611         struct acpi_gpe_xrupt_info *gpe_xrupt_block;
 612         acpi_status status;
 613         u32 flags;
 614
 615         ACPI_FUNCTION_TRACE("ev_install_gpe_block");
 616
 617         status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
 618         if (ACPI_FAILURE(status)) {
 619                 return_ACPI_STATUS(status);
 620         }
 621
 622         gpe_xrupt_block = acpi_ev_get_gpe_xrupt_block(interrupt_number);
 623         if (!gpe_xrupt_block) {
 624                 status = AE_NO_MEMORY;
 625                 goto unlock_and_exit;
 626         }
 627
 628         /* Install the new block at the end of the list with lock */
 629
 630         flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
 631         if (gpe_xrupt_block->gpe_block_list_head) {
 632                 next_gpe_block = gpe_xrupt_block->gpe_block_list_head;
 633                 while (next_gpe_block->next) {
 634                         next_gpe_block = next_gpe_block->next;
 635                 }
 636
 637                 next_gpe_block->next = gpe_block;
 638                 gpe_block->previous = next_gpe_block;
 639         } else {
 640                 gpe_xrupt_block->gpe_block_list_head = gpe_block;
 641         }
 642
 643         gpe_block->xrupt_block = gpe_xrupt_block;
 644         acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
 645
 646       unlock_and_exit:
 647         status = acpi_ut_release_mutex(ACPI_MTX_EVENTS);
 648         return_ACPI_STATUS(status);
 649 }
 650
 651 /*******************************************************************************
 652  *
 653  * FUNCTION:    acpi_ev_delete_gpe_block
 654  *
 655  * PARAMETERS:  gpe_block       - Existing GPE block
 656  *
 657  * RETURN:      Status
 658  *
 659  * DESCRIPTION: Remove a GPE block
 660  *
 661  ******************************************************************************/
 662
 663 acpi_status acpi_ev_delete_gpe_block(struct acpi_gpe_block_info *gpe_block)
 664 {
 665         acpi_status status;
 666         u32 flags;
 667
 668         ACPI_FUNCTION_TRACE("ev_install_gpe_block");
 669
 670         status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
 671         if (ACPI_FAILURE(status)) {
 672                 return_ACPI_STATUS(status);
 673         }
 674
 675         /* Disable all GPEs in this block */
 676
 677         status = acpi_hw_disable_gpe_block(gpe_block->xrupt_block, gpe_block);
 678
 679         if (!gpe_block->previous && !gpe_block->next) {
 680                 /* This is the last gpe_block on this interrupt */
 681
 682                 status = acpi_ev_delete_gpe_xrupt(gpe_block->xrupt_block);
 683                 if (ACPI_FAILURE(status)) {
 684                         goto unlock_and_exit;
 685                 }
 686         } else {
 687                 /* Remove the block on this interrupt with lock */
 688
 689                 flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
 690                 if (gpe_block->previous) {
 691                         gpe_block->previous->next = gpe_block->next;
 692                 } else {
 693                         gpe_block->xrupt_block->gpe_block_list_head =
 694                             gpe_block->next;
 695                 }
 696
 697                 if (gpe_block->next) {
 698                         gpe_block->next->previous = gpe_block->previous;
 699                 }
 700                 acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
 701         }
 702
 703         /* Free the gpe_block */
 704
 705         ACPI_MEM_FREE(gpe_block->register_info);
 706         ACPI_MEM_FREE(gpe_block->event_info);
 707         ACPI_MEM_FREE(gpe_block);
 708
 709       unlock_and_exit:
 710         status = acpi_ut_release_mutex(ACPI_MTX_EVENTS);
 711         return_ACPI_STATUS(status);
 712 }
 713
 714 /*******************************************************************************
 715  *
 716  * FUNCTION:    acpi_ev_create_gpe_info_blocks
 717  *
 718  * PARAMETERS:  gpe_block   - New GPE block
 719  *
 720  * RETURN:      Status
 721  *
 722  * DESCRIPTION: Create the register_info and event_info blocks for this GPE block
 723  *
 724  ******************************************************************************/
 725
 726 static acpi_status
 727 acpi_ev_create_gpe_info_blocks(struct acpi_gpe_block_info *gpe_block)
 728 {
 729         struct acpi_gpe_register_info *gpe_register_info = NULL;
 730         struct acpi_gpe_event_info *gpe_event_info = NULL;
 731         struct acpi_gpe_event_info *this_event;
 732         struct acpi_gpe_register_info *this_register;
 733         acpi_native_uint i;
 734         acpi_native_uint j;
 735         acpi_status status;
 736
 737         ACPI_FUNCTION_TRACE("ev_create_gpe_info_blocks");
 738
 739         /* Allocate the GPE register information block */
 740
 741         gpe_register_info = ACPI_MEM_CALLOCATE((acpi_size) gpe_block->
 742                                                register_count *
 743                                                sizeof(struct
 744                                                       acpi_gpe_register_info));
 745         if (!gpe_register_info) {
 746                 ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 747                                   "Could not allocate the gpe_register_info table\n"));
 748                 return_ACPI_STATUS(AE_NO_MEMORY);
 749         }
 750
 751         /*
 752          * Allocate the GPE event_info block. There are eight distinct GPEs
 753          * per register.  Initialization to zeros is sufficient.
 754          */
 755         gpe_event_info = ACPI_MEM_CALLOCATE(((acpi_size) gpe_block->
 756                                              register_count *
 757                                              ACPI_GPE_REGISTER_WIDTH) *
 758                                             sizeof(struct acpi_gpe_event_info));
 759         if (!gpe_event_info) {
 760                 ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 761                                   "Could not allocate the gpe_event_info table\n"));
 762                 status = AE_NO_MEMORY;
 763                 goto error_exit;
 764         }
 765
 766         /* Save the new Info arrays in the GPE block */
 767
 768         gpe_block->register_info = gpe_register_info;
 769         gpe_block->event_info = gpe_event_info;
 770
 771         /*
 772          * Initialize the GPE Register and Event structures.  A goal of these
 773          * tables is to hide the fact that there are two separate GPE register sets
 774          * in a given gpe hardware block, the status registers occupy the first half,
 775          * and the enable registers occupy the second half.
 776          */
 777         this_register = gpe_register_info;
 778         this_event = gpe_event_info;
 779
 780         for (i = 0; i < gpe_block->register_count; i++) {
 781                 /* Init the register_info for this GPE register (8 GPEs) */
 782
 783                 this_register->base_gpe_number =
 784                     (u8) (gpe_block->block_base_number +
 785                           (i * ACPI_GPE_REGISTER_WIDTH));
 786
 787                 ACPI_STORE_ADDRESS(this_register->status_address.address,
 788                                    (gpe_block->block_address.address + i));
 789
 790                 ACPI_STORE_ADDRESS(this_register->enable_address.address,
 791                                    (gpe_block->block_address.address
 792                                     + i + gpe_block->register_count));
 793
 794                 this_register->status_address.address_space_id =
 795                     gpe_block->block_address.address_space_id;
 796                 this_register->enable_address.address_space_id =
 797                     gpe_block->block_address.address_space_id;
 798                 this_register->status_address.register_bit_width =
 799                     ACPI_GPE_REGISTER_WIDTH;
 800                 this_register->enable_address.register_bit_width =
 801                     ACPI_GPE_REGISTER_WIDTH;
 802                 this_register->status_address.register_bit_offset =
 803                     ACPI_GPE_REGISTER_WIDTH;
 804                 this_register->enable_address.register_bit_offset =
 805                     ACPI_GPE_REGISTER_WIDTH;
 806
 807                 /* Init the event_info for each GPE within this register */
 808
 809                 for (j = 0; j < ACPI_GPE_REGISTER_WIDTH; j++) {
 810                         this_event->register_bit = acpi_gbl_decode_to8bit[j];
 811                         this_event->register_info = this_register;
 812                         this_event++;
 813                 }
 814
 815                 /*
 816                  * Clear the status/enable registers.  Note that status registers
 817                  * are cleared by writing a '1', while enable registers are cleared
 818                  * by writing a '0'.
 819                  */
 820                 status = acpi_hw_low_level_write(ACPI_GPE_REGISTER_WIDTH, 0x00,
 821                                                  &this_register->
 822                                                  enable_address);
 823                 if (ACPI_FAILURE(status)) {
 824                         goto error_exit;
 825                 }
 826
 827                 status = acpi_hw_low_level_write(ACPI_GPE_REGISTER_WIDTH, 0xFF,
 828                                                  &this_register->
 829                                                  status_address);
 830                 if (ACPI_FAILURE(status)) {
 831                         goto error_exit;
 832                 }
 833
 834                 this_register++;
 835         }
 836
 837         return_ACPI_STATUS(AE_OK);
 838
 839       error_exit:
 840         if (gpe_register_info) {
 841                 ACPI_MEM_FREE(gpe_register_info);
 842         }
 843         if (gpe_event_info) {
 844                 ACPI_MEM_FREE(gpe_event_info);
 845         }
 846
 847         return_ACPI_STATUS(status);
 848 }
 849
 850 /*******************************************************************************
 851  *
 852  * FUNCTION:    acpi_ev_create_gpe_block
 853  *
 854  * PARAMETERS:  gpe_device          - Handle to the parent GPE block
 855  *              gpe_block_address   - Address and space_iD
 856  *              register_count      - Number of GPE register pairs in the block
 857  *              gpe_block_base_number - Starting GPE number for the block
 858  *              interrupt_number    - H/W interrupt for the block
 859  *              return_gpe_block    - Where the new block descriptor is returned
 860  *
 861  * RETURN:      Status
 862  *
 863  * DESCRIPTION: Create and Install a block of GPE registers
 864  *
 865  ******************************************************************************/
 866
 867 acpi_status
 868 acpi_ev_create_gpe_block(struct acpi_namespace_node *gpe_device,
 869                          struct acpi_generic_address *gpe_block_address,
 870                          u32 register_count,
 871                          u8 gpe_block_base_number,
 872                          u32 interrupt_number,
 873                          struct acpi_gpe_block_info **return_gpe_block)
 874 {
 875         struct acpi_gpe_block_info *gpe_block;
 876         struct acpi_gpe_event_info *gpe_event_info;
 877         acpi_native_uint i;
 878         acpi_native_uint j;
 879         u32 wake_gpe_count;
 880         u32 gpe_enabled_count;
 881         acpi_status status;
 882         struct acpi_gpe_walk_info gpe_info;
 883
 884         ACPI_FUNCTION_TRACE("ev_create_gpe_block");
 885
 886         if (!register_count) {
 887                 return_ACPI_STATUS(AE_OK);
 888         }
 889
 890         /* Allocate a new GPE block */
 891
 892         gpe_block = ACPI_MEM_CALLOCATE(sizeof(struct acpi_gpe_block_info));
 893         if (!gpe_block) {
 894                 return_ACPI_STATUS(AE_NO_MEMORY);
 895         }
 896
 897         /* Initialize the new GPE block */
 898
 899         gpe_block->register_count = register_count;
 900         gpe_block->block_base_number = gpe_block_base_number;
 901         gpe_block->node = gpe_device;
 902
 903         ACPI_MEMCPY(&gpe_block->block_address, gpe_block_address,
 904                     sizeof(struct acpi_generic_address));
 905
 906         /* Create the register_info and event_info sub-structures */
 907
 908         status = acpi_ev_create_gpe_info_blocks(gpe_block);
 909         if (ACPI_FAILURE(status)) {
 910                 ACPI_MEM_FREE(gpe_block);
 911                 return_ACPI_STATUS(status);
 912         }
 913
 914         /* Install the new block in the global list(s) */
 915
 916         status = acpi_ev_install_gpe_block(gpe_block, interrupt_number);
 917         if (ACPI_FAILURE(status)) {
 918                 ACPI_MEM_FREE(gpe_block);
 919                 return_ACPI_STATUS(status);
 920         }
 921
 922         /* Find all GPE methods (_Lxx, _Exx) for this block */
 923
 924         status = acpi_ns_walk_namespace(ACPI_TYPE_METHOD, gpe_device,
 925                                         ACPI_UINT32_MAX, ACPI_NS_WALK_NO_UNLOCK,
 926                                         acpi_ev_save_method_info, gpe_block,
 927                                         NULL);
 928
 929         /*
 930          * Runtime option: Should Wake GPEs be enabled at runtime?  The default
 931          * is No, they should only be enabled just as the machine goes to sleep.
 932          */
 933         if (acpi_gbl_leave_wake_gpes_disabled) {
 934                 /*
 935                  * Differentiate RUNTIME vs WAKE GPEs, via the _PRW control methods.
 936                  * (Each GPE that has one or more _PRWs that reference it is by
 937                  * definition a WAKE GPE and will not be enabled while the machine
 938                  * is running.)
 939                  */
 940                 gpe_info.gpe_block = gpe_block;
 941                 gpe_info.gpe_device = gpe_device;
 942
 943                 status =
 944                     acpi_ns_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
 945                                            ACPI_UINT32_MAX, ACPI_NS_WALK_UNLOCK,
 946                                            acpi_ev_match_prw_and_gpe, &gpe_info,
 947                                            NULL);
 948         }
 949
 950         /*
 951          * Enable all GPEs in this block that are 1) "runtime" or "run/wake" GPEs,
 952          * and 2) have a corresponding _Lxx or _Exx method.  All other GPEs must
 953          * be enabled via the acpi_enable_gpe() external interface.
 954          */
 955         wake_gpe_count = 0;
 956         gpe_enabled_count = 0;
 957
 958         for (i = 0; i < gpe_block->register_count; i++) {
 959                 for (j = 0; j < 8; j++) {
 960                         /* Get the info block for this particular GPE */
 961
 962                         gpe_event_info =
 963                             &gpe_block->
 964                             event_info[(i * ACPI_GPE_REGISTER_WIDTH) + j];
 965
 966                         if (((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
 967                              ACPI_GPE_DISPATCH_METHOD)
 968                             && (gpe_event_info->
 969                                 flags & ACPI_GPE_TYPE_RUNTIME)) {
 970                                 gpe_enabled_count++;
 971                         }
 972
 973                         if (gpe_event_info->flags & ACPI_GPE_TYPE_WAKE) {
 974                                 wake_gpe_count++;
 975                         }
 976                 }
 977         }
 978
 979         /* Dump info about this GPE block */
 980
 981         ACPI_DEBUG_PRINT((ACPI_DB_INIT,
 982                           "GPE %02X to %02X [%4.4s] %u regs on int 0x%X\n",
 983                           (u32) gpe_block->block_base_number,
 984                           (u32) (gpe_block->block_base_number +
 985                                  ((gpe_block->register_count *
 986                                    ACPI_GPE_REGISTER_WIDTH) - 1)),
 987                           gpe_device->name.ascii, gpe_block->register_count,
 988                           interrupt_number));
 989
 990         /* Enable all valid GPEs found above */
 991
 992         status = acpi_hw_enable_runtime_gpe_block(NULL, gpe_block);
 993
 994         ACPI_DEBUG_PRINT((ACPI_DB_INIT,
 995                           "Found %u Wake, Enabled %u Runtime GPEs in this block\n",
 996                           wake_gpe_count, gpe_enabled_count));
 997
 998         /* Return the new block */
 999
1000         if (return_gpe_block) {
1001                 (*return_gpe_block) = gpe_block;
1002         }
1003
1004         return_ACPI_STATUS(AE_OK);
1005 }
1006
1007 /*******************************************************************************
1008  *
1009  * FUNCTION:    acpi_ev_gpe_initialize
1010  *
1011  * PARAMETERS:  None
1012  *
1013  * RETURN:      Status
1014  *
1015  * DESCRIPTION: Initialize the GPE data structures
1016  *
1017  ******************************************************************************/
1018
1019 acpi_status acpi_ev_gpe_initialize(void)
1020 {
1021         u32 register_count0 = 0;
1022         u32 register_count1 = 0;
1023         u32 gpe_number_max = 0;
1024         acpi_status status;
1025
1026         ACPI_FUNCTION_TRACE("ev_gpe_initialize");
1027
1028         status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
1029         if (ACPI_FAILURE(status)) {
1030                 return_ACPI_STATUS(status);
1031         }
1032
1033         /*
1034          * Initialize the GPE Block(s) defined in the FADT
1035          *
1036          * Why the GPE register block lengths are divided by 2:  From the ACPI Spec,
1037          * section "General-Purpose Event Registers", we have:
1038          *
1039          * "Each register block contains two registers of equal length
1040          *  GPEx_STS and GPEx_EN (where x is 0 or 1). The length of the
1041          *  GPE0_STS and GPE0_EN registers is equal to half the GPE0_LEN
1042          *  The length of the GPE1_STS and GPE1_EN registers is equal to
1043          *  half the GPE1_LEN. If a generic register block is not supported
1044          *  then its respective block pointer and block length values in the
1045          *  FADT table contain zeros. The GPE0_LEN and GPE1_LEN do not need
1046          *  to be the same size."
1047          */
1048
1049         /*
1050          * Determine the maximum GPE number for this machine.
1051          *
1052          * Note: both GPE0 and GPE1 are optional, and either can exist without
1053          * the other.
1054          *
1055          * If EITHER the register length OR the block address are zero, then that
1056          * particular block is not supported.
1057          */
1058         if (acpi_gbl_FADT->gpe0_blk_len && acpi_gbl_FADT->xgpe0_blk.address) {
1059                 /* GPE block 0 exists (has both length and address > 0) */
1060
1061                 register_count0 = (u16) (acpi_gbl_FADT->gpe0_blk_len / 2);
1062
1063                 gpe_number_max =
1064                     (register_count0 * ACPI_GPE_REGISTER_WIDTH) - 1;
1065
1066                 /* Install GPE Block 0 */
1067
1068                 status = acpi_ev_create_gpe_block(acpi_gbl_fadt_gpe_device,
1069                                                   &acpi_gbl_FADT->xgpe0_blk,
1070                                                   register_count0, 0,
1071                                                   acpi_gbl_FADT->sci_int,
1072                                                   &acpi_gbl_gpe_fadt_blocks[0]);
1073
1074                 if (ACPI_FAILURE(status)) {
1075                         ACPI_REPORT_ERROR(("Could not create GPE Block 0, %s\n",
1076                                            acpi_format_exception(status)));
1077                 }
1078         }
1079
1080         if (acpi_gbl_FADT->gpe1_blk_len && acpi_gbl_FADT->xgpe1_blk.address) {
1081                 /* GPE block 1 exists (has both length and address > 0) */
1082
1083                 register_count1 = (u16) (acpi_gbl_FADT->gpe1_blk_len / 2);
1084
1085                 /* Check for GPE0/GPE1 overlap (if both banks exist) */
1086
1087                 if ((register_count0) &&
1088                     (gpe_number_max >= acpi_gbl_FADT->gpe1_base)) {
1089                         ACPI_REPORT_ERROR(("GPE0 block (GPE 0 to %d) overlaps the GPE1 block (GPE %d to %d) - Ignoring GPE1\n", gpe_number_max, acpi_gbl_FADT->gpe1_base, acpi_gbl_FADT->gpe1_base + ((register_count1 * ACPI_GPE_REGISTER_WIDTH) - 1)));
1090
1091                         /* Ignore GPE1 block by setting the register count to zero */
1092
1093                         register_count1 = 0;
1094                 } else {
1095                         /* Install GPE Block 1 */
1096
1097                         status =
1098                             acpi_ev_create_gpe_block(acpi_gbl_fadt_gpe_device,
1099                                                      &acpi_gbl_FADT->xgpe1_blk,
1100                                                      register_count1,
1101                                                      acpi_gbl_FADT->gpe1_base,
1102                                                      acpi_gbl_FADT->sci_int,
1103                                                      &acpi_gbl_gpe_fadt_blocks
1104                                                      [1]);
1105
1106                         if (ACPI_FAILURE(status)) {
1107                                 ACPI_REPORT_ERROR(("Could not create GPE Block 1, %s\n", acpi_format_exception(status)));
1108                         }
1109
1110                         /*
1111                          * GPE0 and GPE1 do not have to be contiguous in the GPE number
1112                          * space. However, GPE0 always starts at GPE number zero.
1113                          */
1114                         gpe_number_max = acpi_gbl_FADT->gpe1_base +
1115                             ((register_count1 * ACPI_GPE_REGISTER_WIDTH) - 1);
1116                 }
1117         }
1118
1119         /* Exit if there are no GPE registers */
1120
1121         if ((register_count0 + register_count1) == 0) {
1122                 /* GPEs are not required by ACPI, this is OK */
1123
1124                 ACPI_DEBUG_PRINT((ACPI_DB_INIT,
1125                                   "There are no GPE blocks defined in the FADT\n"));
1126                 status = AE_OK;
1127                 goto cleanup;
1128         }
1129
1130         /* Check for Max GPE number out-of-range */
1131
1132         if (gpe_number_max > ACPI_GPE_MAX) {
1133                 ACPI_REPORT_ERROR(("Maximum GPE number from FADT is too large: 0x%X\n", gpe_number_max));
1134                 status = AE_BAD_VALUE;
1135                 goto cleanup;
1136         }
1137
1138       cleanup:
1139         (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
1140         return_ACPI_STATUS(AE_OK);
1141 }